summaryrefslogtreecommitdiff
path: root/MIBS/saf/SAF-IPRADIO
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/saf/SAF-IPRADIO')
-rw-r--r--MIBS/saf/SAF-IPRADIO1693
1 files changed, 1693 insertions, 0 deletions
diff --git a/MIBS/saf/SAF-IPRADIO b/MIBS/saf/SAF-IPRADIO
new file mode 100644
index 0000000..20b8ef4
--- /dev/null
+++ b/MIBS/saf/SAF-IPRADIO
@@ -0,0 +1,1693 @@
+SAF-IPRADIO DEFINITIONS ::= BEGIN
+-- old name: SAF-IPFODU
+--
+-- Mib for: SAF CFIP FODU v1.3x, v1.4x and SAF CFIP FODU GE (Lumina) v1.4x
+-- released after 2009.07.20
+-- SAF CFIP IDU (Phoenix)
+-- released after 2010.02.20
+-- FreeMile
+-- Version: 1.1.9
+-- Date/Time: 2014.01.16 13:20
+-- Version: 1.1.89
+-- Date/Time: 2013.03.14 14:00
+-- Version: 1.1.88
+-- Date/Time: 2012.09.25 11:37
+-- Version: 1.1.87
+-- Date/Time: 2012.07.19 11:22
+-- Version: 1.1.7
+-- Date/Time: 2012.06.25 18:28
+-- Version: 1.1.6
+-- Date/Time: 2012.03.30 11:59
+-- Version: 1.1.5
+-- Date/Time: 2011.05.05 13:23
+-- Version: 1.1.4
+-- Date/Time: 2010.10.27 16:17
+-- Version: 1.1.3
+-- Date/Time: 2010.09.27 14:05
+-- Version: 1.1.2
+-- Date/Time: 2009.09.20 15:10
+-- Customer suport: <techsupport@saftehnika.com>
+-- Author: Andris Kluga
+--
+-- Additional modules supported by device --
+-- SAF-ALARM-MIB ( OID 1.3.6.1.4.1.7571.100.118 )
+--
+-- History --
+-- 2008.07.11 initial release 1.0.0 (originally named 1.00)
+-- 2008.10.21 removed loopbacks: rf,far,ethernet (unsupported by hardware)
+-- 2008.11.04 added vlan 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.13,14
+-- 2009.01.09 changes in comments
+-- 2009.01.22 changed e1 to e1t1 to use with both etsi and ansi modems
+-- 2009.03.18 temperature in degrees C (no more *10)
+-- 2009.05.11 e1 mask
+-- 2009.07.14 e1t1ChannelNr
+-- 2010.02.17 one mib for all IP products
+-- 2010.09.27 FreeMile (added qpsklimited modulation)
+-- 2010.10.13 for Lumina w/o duplexer radioSide read-write
+-- 2010.10.27 add comment at radioTxPower: to turn power off SET the value -100
+-- 2012.03.28 apsk16 apsk32 modulations changed to qam16 qam32; location length string set to 16
+-- 2012.03.30 minor changes
+-- 2012.06.25 added new QAM modulations to "replace" old PSK modulations.
+-- 2012.07.10 minor syntax changes.
+-- 2012.09.25 reset descripotion change. 1 - cold 2 - warm.
+-- 2013.03.14 minor changes for mib validation
+-- 2014.01.16 add license status
+
+
+IMPORTS
+ enterprises, NetworkAddress, IpAddress,
+ Counter, Gauge, TimeTicks FROM RFC1155-SMI
+ OBJECT-TYPE FROM RFC-1212
+ DisplayString, ifEntry FROM RFC1213-MIB
+ DateAndTime FROM SNMPv2-TC
+ TRAP-TYPE FROM RFC-1215;
+
+
+saf OBJECT IDENTIFIER ::= { enterprises 7571 }
+tehnika OBJECT IDENTIFIER ::= { saf 100 }
+microwaveRadio OBJECT IDENTIFIER ::= { tehnika 1}
+pointToPoint OBJECT IDENTIFIER ::= { microwaveRadio 1 }
+
+safip OBJECT IDENTIFIER ::= { pointToPoint 5 }
+ipRadio OBJECT IDENTIFIER ::= { safip 1 }
+
+ipRadioCfg OBJECT IDENTIFIER ::= { ipRadio 1 }
+ipRadioMgmt OBJECT IDENTIFIER ::= { ipRadio 2 }
+ipRadioStat OBJECT IDENTIFIER ::= { ipRadio 3 }
+ipRadioCfgGeneral OBJECT IDENTIFIER ::= { ipRadioCfg 1 }
+ipRadioCfgNetwork OBJECT IDENTIFIER ::= { ipRadioCfg 2 }
+ipRadioStatEth OBJECT IDENTIFIER ::= { ipRadioStat 2 }
+modemStatistics OBJECT IDENTIFIER ::= { ipRadioStat 4 } -- 2011.05.05
+
+
+product OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Name of the model."
+ ::= { ipRadioCfgGeneral 1 }
+
+description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Description of the model."
+ ::= { ipRadioCfgGeneral 2 }
+
+hostname OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "The name of the host."
+ ::= { ipRadioCfgGeneral 3 }
+
+sysDateAndTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Current date and time set.
+ For SET tenths of seconds ignored."
+ ::= { ipRadioCfgGeneral 4 }
+
+sysTemperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unit temperature in degrees by Celsius.
+ NB - sw before 2009.03.18 shows in *10 degrees"
+ ::= { ipRadioCfgGeneral 5 }
+
+license OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "To set license information. Read allways 'OK'."
+ ::= { ipRadioCfgGeneral 6 }
+
+licenseMask OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Read license mask."
+ ::= { ipRadioCfgGeneral 7 }
+
+licenseUpdateStatus OBJECT-TYPE
+-- starting from v 1.64.25
+ SYNTAX INTEGER {
+ ok(1),
+ error(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Status of last license update operation
+ by setting license using snmp."
+ ::= { ipRadioCfgGeneral 8 }
+
+writeConfig OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Write Config"
+ ::= { ipRadioMgmt 1 }
+
+restartcpu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION "Restart of Mng CPU. Values:
+ 1 - 'cold' restart;
+ 3 - sw"
+ ::= { ipRadioMgmt 2 }
+
+loopbacks OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(1),
+ off(2),
+-- rf(3), 2008.10.21
+ if(4),
+ modem(5),
+-- far(6), 2008.10.21
+-- ethernet(7), 2008.10.21
+-- e1t1-1(8), use tributary mask
+-- e1t1-2(9),
+-- e1t1-3(10),
+-- e1t1-4(11),
+ multi(12)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Set loopback for 1 minute. value error(1) is not writable.
+ Status of loopbacks.
+ Values:
+ 1 - 'error' (not writable);
+ 2 - 'off';
+ 3 - 'rf' (radio frequency loopback); N/A 2008.10.21
+ 4 - 'if' (intermediate frequency loopback);
+ 5 - 'modem' (modem loopback);
+ 6 - 'far' (far end loopback); N/A 2008.10.21
+ 7 - 'ethernet' (Ethernet loopback); N/A 2008.10.21
+ 8 - 'e1t1-1' (E1/T1 channel 1 loopback); N/A from firmware 1.51
+ 9 - 'e1t1-2' (E1/T1 channel 2 loopback); N/A from firmware 1.51
+ 10 - 'e1t1-3' (E1/T1 channel 3 loopback); N/A from firmware 1.51
+ 11 - 'e1t1-4' (E1/T1 channel 4 loopback); N/A from firmware 1.51
+ 12 - 'multi' (E1/T1 multi - look channel tributary mask)"
+ ::= { ipRadioMgmt 3 }
+
+loopback-tributary-mask OBJECT-TYPE
+-- starting from firmware version 1.51
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Loopback mask for E1/T1 channels"
+ ::= { ipRadioMgmt 4 }
+
+--loopbacks-text OBJECT-TYPE
+-- starting from firmware version 1.51
+-- SYNTAX DisplayString (SIZE(0..255))
+-- ACCESS read-only
+-- STATUS mandatory
+-- DESCRIPTION "This string gives the same information as loopbacks and loopback-tributary-mask
+-- as a text string"
+-- ::= { ipRadioMgmt 5 }
+
+localIp OBJECT-TYPE
+-- added 2008.09.22
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "IPv4 Ethernet address of the local
+ unit in a number format(XXX.XXX.XXX.XXX)"
+ ::= { ipRadioCfgNetwork 1 }
+localIpMask OBJECT-TYPE
+-- added 2008.09.22
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "IPv4 Ethernet mask of the local
+ unit in a number format (XXX.XXX.XXX.XXX)"
+ ::= { ipRadioCfgNetwork 2 }
+remoteIp OBJECT-TYPE
+-- added 2008.09.22
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "IPv4 Ethernet address of the remote
+ unit in a number format (XXX.XXX.XXX.XXX)."
+ ::= { ipRadioCfgNetwork 3 }
+
+--
+
+radioTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RadioEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Radio table."
+ ::= { ipRadioCfgGeneral 10 }
+
+radioEntry OBJECT-TYPE
+ SYNTAX RadioEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing objects in radio table."
+ INDEX { radioIndex }
+ ::= { radioTable 1 }
+RadioEntry ::=
+ SEQUENCE {
+ radioIndex
+ INTEGER,
+ radioGenStatus
+ INTEGER,
+ radioSide
+ INTEGER,
+ radioTxPower
+ INTEGER,
+ radioRxLevel
+ INTEGER,
+ radioDuplexShift
+ INTEGER,
+ radioLoopback
+ INTEGER,
+ radioTxMute
+ INTEGER,
+ radioTxFrequency
+ INTEGER,
+ radioRxFrequency
+ INTEGER
+
+ }
+
+radioIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ local(1),
+ remote(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A unique value for each radio.
+ Its value represents UNIT:
+ 1 - for 'local';
+ 2 - for 'remote'"
+ ::= { radioEntry 1 }
+
+radioGenStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A General status of each radio:
+ 1 - 'OK';
+ 2 - 'error'"
+ ::= { radioEntry 2 }
+
+radioSide OBJECT-TYPE
+ SYNTAX INTEGER{
+ high(1),
+ low(2)
+ }
+ ACCESS read-write
+-- warning!!! This value writable only on devices w/o hw duplexer.
+-- In all other cases this is read-only.
+ STATUS mandatory
+ DESCRIPTION
+ "Side for duplex communication."
+ ::= { radioEntry 3 }
+
+radioTxPower OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Tx power of radio transmitter in dBm."
+-- to turn power off SET the value -100
+ ::= { radioEntry 4 }
+
+radioRxLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Received signal level in dBm."
+ ::= { radioEntry 5 }
+
+radioDuplexShift OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Utilized duplex shift in KHz."
+ ::= { radioEntry 6 }
+
+radioLoopback OBJECT-TYPE
+ SYNTAX INTEGER{
+ on(1),
+ off(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Radio loopback on/off. To set use
+ loopback command."
+ ::= { radioEntry 7 }
+
+radioTxMute OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Status of 'Tx mute':
+ 1 - Tx is muted;
+ 2 - Tx is not muted."
+ ::= { radioEntry 8 }
+
+radioTxFrequency OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Tx frequency in kHz."
+ ::= { radioEntry 9 }
+
+radioRxFrequency OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Rx frequency in kHz."
+ ::= { radioEntry 10 }
+
+--
+
+-- ATPC
+
+
+aTPCTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ATPCEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "ATPC table"
+ ::= { ipRadioCfgGeneral 11 }
+
+aTPCEntry OBJECT-TYPE
+ SYNTAX ATPCEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing objects in ATPC table."
+ INDEX { atpcIndex }
+ ::= { aTPCTable 1 }
+
+ATPCEntry ::=
+ SEQUENCE {
+ atpcIndex
+ INTEGER,
+ atpcEnabled
+ INTEGER,
+ atpcTxPowerCorrection
+ INTEGER
+-- atpcTxPowerWithCorrection
+-- INTEGER
+ }
+
+atpcIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ local(1),
+ remote(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Its value represents UNIT
+ 1 for 'local';
+ 2 for 'remote'."
+ ::= { aTPCEntry 1 }
+
+atpcEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "ATPC status:
+ 1 for 'on';
+ 2 for 'off'."
+ ::= { aTPCEntry 2 }
+
+atpcTxPowerCorrection OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "ATPC Tx power correction in dBm."
+ ::= { aTPCEntry 3 }
+
+--atpcTxPowerWithCorrection OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS mandatory
+-- DESCRIPTION "Tx power together with ATPC correction in dBm."
+-- ::= { aTPCEntry 4 }
+
+-- modem
+
+modemTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ModemEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "CFIP modem table."
+ ::= { ipRadioCfgGeneral 12 }
+
+modemEntry OBJECT-TYPE
+ SYNTAX ModemEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing objects in modem table."
+ INDEX { modemIndex }
+ ::= { modemTable 1 }
+
+ModemEntry ::=
+ SEQUENCE {
+ modemIndex
+ INTEGER,
+ modemGeneralStatus
+ INTEGER,
+ modemBandwith
+ INTEGER,
+ modemE1T1Channels
+ INTEGER,
+ modemModulation
+ INTEGER,
+ modemTotalCapacity
+ INTEGER,
+ modemEthernetCapacity
+ INTEGER,
+ modemAcqStatus
+ INTEGER,
+ modemLastAcqError
+ INTEGER,
+ modemRadialMSE
+ INTEGER,
+ modemInternalAGCgain
+ INTEGER,
+ modemCarrierOffset
+ INTEGER,
+ modemSymbolRateTx
+ INTEGER,
+ modemSymbolRateRx
+ INTEGER,
+ modemLDPCdecoderStress
+ DisplayString,
+ modemACMengine
+ INTEGER,
+ modemACMmodulationMin
+ INTEGER,
+ modemACMtotalCapacity
+ INTEGER,
+ modemACMethernetCapacity
+ INTEGER,
+ modemStandard -- only starting from v 2.20
+ INTEGER,
+ modemE1T1ChannelMask
+ INTEGER,
+ modemACMmodulationMax
+ INTEGER,
+ modemRowStatus
+ INTEGER
+ }
+
+modemIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ local(1),
+ remote(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Value represents UNIT:
+ 1 for local;
+ 2 for remote."
+ ::= { modemEntry 1 }
+
+modemGeneralStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "A General status of each modem:
+ 1 - 'OK';
+ 2 - 'error'"
+ ::= { modemEntry 2 }
+
+modemBandwith OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Modem bandwidth set in KHz."
+ ::= { modemEntry 3 }
+
+modemE1T1Channels OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Number of E1 or T1 channels set."
+ ::= { modemEntry 4 }
+
+
+modemModulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ qpsk(1),
+ psk8(2),
+ qam16(3),
+ qam32(4),
+ qam64(5),
+ qam128(6),
+ qam256(7),
+ qpsklimited(8),
+ wqpsk(9),
+ wpsk8(10),
+ wqam16(11),
+ wqam32(12),
+ wqam64(13),
+ wqam128(14),
+ wqam256(15),
+ acmqpsk(17),
+ acmpsk8(18),
+ acmqam16(19),
+ acmqam32(20),
+ acmqam64(21),
+ acmqam128(22),
+ acmqam256(23),
+ acmwqpsk(25),
+ acmwpsk8(26),
+ acmwqam16(27),
+ acmwqam32(28),
+ acmwqam64(29),
+ acmwqam128(30),
+ acmwqam256(31),
+ qam4(33),
+ qam8(34),
+ qam4limited(40),
+ wqam4(41),
+ wqam8(42),
+ acmqam4(49),
+ acmqam8(50),
+ acmwqam4(57),
+ acmwqam8(58)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Modem modulation set.
+ Modulution values are
+ following: QPSK - 1, 8PSK - 2, 16QAM - 3,
+ 32QAM - 4, 64QAM - 5, 128QAM - 6,
+ 256QAM - 7.
+ The combination of wide band and ACM calculates as
+ (modulation + 8*is_wide + 16*is_ACM).
+ Note: not all of listed modulations supported by hardware.
+ Plese check manual."
+ ::= { modemEntry 5 }
+
+modemTotalCapacity OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total capacity set in Kbps."
+ ::= { modemEntry 6 }
+
+modemEthernetCapacity OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Ethernet capacity set in Kbps."
+ ::= { modemEntry 7 }
+
+modemAcqStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION " "
+ ::= { modemEntry 8 }
+
+modemLastAcqError OBJECT-TYPE
+ SYNTAX INTEGER{
+ success(1),
+ erragc(2),
+ errtiming(3),
+ errfreqsweep(4),
+ errmse(5),
+ errbit(6),
+ errservice(7),
+ errblind(8),
+ errtimeout(9),
+ errstopped(10),
+ errfatal(11)
+ }
+
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION " "
+ ::= { modemEntry 9 }
+
+modemRadialMSE OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Radial mean square error value *10 in dB.
+ Radial MSE is a method for estimating the
+ signal to noise ratio. ACM engine uses
+ normalized MSE, which is the inverse of SNR.
+ It is calculated by dividing the estimated
+ MSE level with the energy of the received
+ constellation. Radial MSE peak value threshold
+ is dependent on modulation used and LDPC
+ code rate.
+ In case of QPSK it is -8 dB (-10.5 for 'wide'),
+ 16APSK - -13 dB (-18 for 'wide') and
+ 32APSK - -15.5 dB (-21.5 for 'wide'). If the
+ value trespasses this threshold, BER at the
+ output of LDPC decoder will reach the value
+ of 1.0e-06."
+ ::= { modemEntry 10 }
+
+modemInternalAGCgain OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION " dBm "
+ ::= { modemEntry 11 }
+
+modemCarrierOffset OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Carrier frequency offset in Hz."
+ ::= { modemEntry 12 }
+
+modemSymbolRateTx OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION " kHz "
+ ::= { modemEntry 13 }
+
+modemSymbolRateRx OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION " kHz "
+ ::= { modemEntry 14 }
+
+modemLDPCdecoderStress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The load of LDPC (low-density
+ parity-check code) decoder.
+ The LDPC is monitored for the number
+ of errors being corrected on the input
+ of LDPC decoder.
+ LDPC stress value thresholds @ BER 1.0e-06:
+ - for standard settings ~4.0e-02;
+ - for 'wide' option ~ 1.0e-03.
+ As long as LDPC stress value is under the
+ specified thresholds, amount of errors (and
+ BER itself) on the output of LDPC remains
+ at zero level."
+ ::= { modemEntry 15 }
+
+modemACMengine OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Status of ACM engine. When 'on',
+ value '1' is shown, when 'off' - value is '2'."
+ ::= { modemEntry 16 }
+
+modemACMmodulationMin OBJECT-TYPE
+ SYNTAX INTEGER {
+ qpsk(1),
+ psk8(2),
+ qam16(3),
+ qam32(4),
+ qam64(5),
+ qam128(6),
+ qam256(7),
+ qpsklimited(8),
+ wqpsk(9),
+ wpsk8(10),
+ wqam16(11),
+ wqam32(12),
+ wqam64(13),
+ wqam128(14),
+ wqam256(15),
+ acmqpsk(17),
+ acmpsk8(18),
+ acmqam16(19),
+ acmqam32(20),
+ acmqam64(21),
+ acmqam128(22),
+ acmqam256(23),
+ acmwqpsk(25),
+ acmwpsk8(26),
+ acmwqam16(27),
+ acmwqam32(28),
+ acmwqam64(29),
+ acmwqam128(30),
+ acmwqam256(31),
+ qam4(33),
+ qam8(34),
+ qam4limited(40),
+ wqam4(41),
+ wqam8(42),
+ acmqam4(49),
+ acmqam8(50),
+ acmwqam4(57),
+ acmwqam8(58)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Modem modulation set.
+ Modulution values are
+ following: QPSK - 1, 8PSK - 2, 16QAM - 3,
+ 32QAM - 4, 64QAM - 5, 128QAM - 6,
+ 256QAM - 7.
+ The combination of wide band and ACM calculates as
+ (modulation + 8*is_wide + 16*is_ACM).
+ Note: not all of listed modulations supported by hardware.
+ Plese check manual."
+ ::= { modemEntry 17}
+--modemACMmodulationMin OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS mandatory
+-- DESCRIPTION "Modulation set by ACM."
+-- ::= { modemEntry 17 }
+
+modemACMtotalCapacity OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total capacity in Kbps set by ACM."
+ ::= { modemEntry 18 }
+
+modemACMethernetCapacity OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Ethernet capacity in Kbps set by ACM."
+ ::= { modemEntry 19 }
+
+modemStandard OBJECT-TYPE -- from version 1.20
+ SYNTAX INTEGER{
+ etsi(1),
+ ansi(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Modem operational standard ETSI or ANSI"
+ ::= { modemEntry 20 }
+
+modemE1T1ChannelMask OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "E1 or T1 channel mask 0x00 - 0x0f"
+ ::= { modemEntry 21 }
+
+modemACMmodulationMax OBJECT-TYPE
+ SYNTAX INTEGER {
+ qpsk(1),
+ psk8(2),
+ qam16(3),
+ qam32(4),
+ qam64(5),
+ qam128(6),
+ qam256(7),
+ qpsklimited(8),
+ wqpsk(9),
+ wpsk8(10),
+ wqam16(11),
+ wqam32(12),
+ wqam64(13),
+ wqam128(14),
+ wqam256(15),
+ acmqpsk(17),
+ acmpsk8(18),
+ acmqam16(19),
+ acmqam32(20),
+ acmqam64(21),
+ acmqam128(22),
+ acmqam256(23),
+ acmwqpsk(25),
+ acmwpsk8(26),
+ acmwqam16(27),
+ acmwqam32(28),
+ acmwqam64(29),
+ acmwqam128(30),
+ acmwqam256(31),
+ qam4(33),
+ qam8(34),
+ qam4limited(40),
+ wqam4(41),
+ wqam8(42),
+ acmqam4(49),
+ acmqam8(50),
+ acmwqam4(57),
+ acmwqam8(58)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Modem modulation set.
+ Modulution values are
+ following: QPSK - 1, 8PSK - 2, 16QAM - 3,
+ 32QAM - 4, 64QAM - 5, 128QAM - 6,
+ 256QAM - 7.
+ The combination of wide band and ACM calculates as
+ (modulation + 8*is_wide + 16*is_ACM).
+ Note: as PSK modulations are now physicaly deprecated,
+ theese are replased with QAM, so for new QAM modulations
+ there are modificatior +32.
+ Note: not all of listed modulations supported by hardware.
+ Plese check manual."
+ ::= { modemEntry 22}
+
+
+modemRowStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(1),
+ notReady(3),
+ undo(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Row status - to update written data for
+ modemBandwith,
+ modemACMmodulationMin,
+ modemACMmodulationMax,
+ modemE1T1ChannelMask. "
+ ::= { modemEntry 23 }
+
+--modemACMprofileTx OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION "Tx ACM profile."
+-- ::= { modemEntry 21 }
+
+--modemACMprofileRx OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION "Rx ACM profile."
+-- ::= { modemEntry 22 }
+
+--modemRxFrequencyOffset OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION "Rx frequency offset in KHz."
+-- ::= { modemEntry 23 }
+
+--modemTxFrequencyOffset OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION "Tx frequency offset in KHz."
+-- ::= { modemEntry 24 }
+-- vlan 2008.10.04
+
+vlansEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2),
+ reset(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "unit temperature *10 degrees Celsius"
+ ::= { ipRadioCfgGeneral 13 }
+
+--
+vlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VlanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Vlan table"
+ ::= { ipRadioCfgGeneral 14 }
+
+vlanEntry OBJECT-TYPE
+ SYNTAX VlanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "entry containing vlan objects"
+ AUGMENTS { ifEntry }
+ ::= { vlanTable 1 }
+
+VlanEntry ::=
+ SEQUENCE {
+ vlanNumber INTEGER,
+ vlanPortType INTEGER,
+ vlanPortmap INTEGER,
+ vlanFid INTEGER,
+ vlanCfgStat INTEGER,
+ vlanRowStatus INTEGER
+ }
+
+ vlanNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A unique value for each vlan. "
+ ::= { vlanEntry 1 }
+
+ vlanPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ management(1),
+ none(2),
+ traffic(3),
+ endpoint(4)
+
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN port type
+ management, traffic or endpoint
+ "
+ ::= { vlanEntry 2 }
+
+ vlanPortmap OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "display port bindings
+ bitfield 111(bin)
+ "
+ ::= { vlanEntry 3 }
+
+ vlanFid OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "a filtering identifier (assigned automagically)"
+ ::= { vlanEntry 4 }
+
+ vlanCfgStat OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ clear(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "enable/disable vlan # or clear row data"
+ ::= { vlanEntry 5 }
+
+ vlanRowStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(1),
+ notReady(3),
+ undo(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status (execute configuration on active)
+ Changing any table value sets this value into
+ state notReady. To update row status write value
+ active(1) into this variable."
+ ::= { vlanEntry 6 }
+
+
+--
+-- Eth
+--
+ethRXTruncatedFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of truncated received frames since
+ unit start or statistics reset. "
+ ::= { ipRadioStatEth 1 }
+
+ethRXLongEvents OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames having byte count greater
+ than MAXIMUM FRAME SIZE parameter (1518,
+ 1536 or 1916 bytes) since unit start or
+ statistics reset."
+ ::= { ipRadioStatEth 2 }
+
+ethRXVlanTagsDetected OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of VLAN Tags detected since unit
+ start or statistics reset."
+ ::= { ipRadioStatEth 3 }
+
+ethRXUnsupOpcodes OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames recognized as control frames
+ but contained an Unknown Opcode since unit
+ start or statistics reset."
+ ::= { ipRadioStatEth 4 }
+
+ethRXPauseFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames received as control frames
+ with valid PAUSE opcodes since unit start or
+ statistics reset."
+ ::= { ipRadioStatEth 5 }
+
+ethRXControlFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames received as control frames
+ since unit start or statistics reset."
+ ::= { ipRadioStatEth 6 }
+
+ethRXDribleNibbles OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Indicates that following the end of the
+ packet additional 1 to 7 bits are received.
+ A single nibble, named the dribble nibble,
+ is formed but not sent to the system;"
+ ::= { ipRadioStatEth 7 }
+
+ethRXBroadcasts OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of packets, which destination
+ address contained broadcast address,
+ since unit start or statiistics reset."
+ ::= { ipRadioStatEth 8 }
+
+ethRXMulticasts OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of packets, which destination
+ address contained multicast address since
+ unit start or statistics reset."
+ ::= { ipRadioStatEth 9 }
+
+ethRXDones OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Reception of packets successfully
+ completed. Number of completed packets
+ since unit start or statistics reset."
+ ::= { ipRadioStatEth 10 }
+
+ethRXOutOfRangeErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames where Type/Length field
+ larger than 1518 (Type Field) bytes since
+ unit start or statistics reset."
+ ::= { ipRadioStatEth 11 }
+
+ethRXLengthCheckerrorsErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames where frame length field
+ in the packet does not match the actual data
+ byte length and is not a Type Field since
+ unit start or statistics reset."
+ ::= { ipRadioStatEth 12 }
+
+ethRXCRCErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames where frame CRC do not
+ match the internally generated CRC since
+ unit start or statistics reset"
+ ::= { ipRadioStatEth 13 }
+
+ethRXCodeErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of packets where one or more nibbles
+ are signalled as errors during reception of
+ the packet since unit start or statistics
+ reset."
+ ::= { ipRadioStatEth 14 }
+
+ethRXFalseCarrierErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Indicates that following the last receive
+ statistics vector, a false carrier was
+ detected, noted and reported with this the
+ next receive statistics. The false carrier
+ is not associated with this packet. False
+ carrier is activated on the receive channel
+ that does not result in a packet receive
+ attempt being made;"
+ ::= { ipRadioStatEth 15 }
+
+ethRXDvEvent OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of the last receive (Rx) events seen
+ being too short to be valid packets since the
+ last unit (re)start or purification of
+ statistics."
+ ::= { ipRadioStatEth 16 }
+
+ethRXPrevPktDropped OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Indicates that since the last receive (Rx),
+ a packet is dropped (i.e. interframe gap
+ too small)."
+ ::= { ipRadioStatEth 17 }
+
+ethRXByteCounterHi OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total number of bytes received (Rx) on the
+ wire since the last unit (re)start or
+ purification of statistics, not counting
+ collided bytes (bits 31:0)."
+ ::= { ipRadioStatEth 18 }
+
+ethRXByteCounterLow OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total number of bytes received (Rx) on the
+ wire since the last unit (re)start or
+ purification of statistics, not counting
+ collided bytes (bits 62:32)."
+ ::= { ipRadioStatEth 19 }
+
+--Counter64 data type is unsupported by SMIv1. Not expected
+--ethRXByteCounter64b OBJECT-TYPE
+-- SYNTAX Counter64
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION "Total number of bytes received (Rx) on the
+-- wire since the last unit (re)start or
+-- purification of statistics, not counting
+-- collided bytes."
+-- ::= { ipRadioStatEth 20 }
+
+ethTXVlanTags OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of VLAN tagged Tx packets since the
+ last unit (re)start or purification of
+ statistics. 32-bit counter."
+ ::= { ipRadioStatEth 21 }
+
+ethTXBackpresEvents OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of times Tx carrier-sense-method
+ backpressure was previously applied since the
+ last unit (re)start or purification of
+ statistics."
+ ::= { ipRadioStatEth 22 }
+
+ethTXPauseFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames transmitted (Tx) as control
+ frames with valid PAUSE opcodes since the last
+ unit (re)start or purification of statistics."
+ ::= { ipRadioStatEth 23 }
+
+ethTXControlFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames transmitted (Tx) as control
+ frames since the last unit (re)start or
+ purification of statistics."
+ ::= { ipRadioStatEth 24 }
+
+ethTXWireByteCounterHi OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total number of bytes transmitted (Tx)
+ on the wire since the last unit (re)start
+ or purification of statistics, including
+ all bytes from collided attempts
+ (bits 31:0)."
+ ::= { ipRadioStatEth 25 }
+
+ethTXWireByteCounterLow OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total number of bytes transmitted (Tx)
+ on the wire since the last unit (re)start
+ or purification of statistics, including
+ all bytes from collided attempts
+ (bits 62:32)."
+ ::= { ipRadioStatEth 26 }
+
+--Counter64 data type is unsupported by SMIv1. Not expected
+--ethTXWireByteCounter64b OBJECT-TYPE
+-- SYNTAX Counter64
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION "Total number of bytes transmitted (Tx)
+-- on the wire since the last unit (re)start
+-- or purification of statistics, including
+-- all bytes from collided attempts."
+-- ::= { ipRadioStatEth 27 }
+
+ethTXUnderruns OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of underruns occured during frame
+ transmission (Tx) since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 28 }
+
+ethTXGiants OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx frames having byte count
+ greater than the MAXIMUM FRAME SIZE
+ parameter (1516, 1536 or 1916 bytes)
+ since the last unit (re)start or
+ purification of statistics."
+ ::= { ipRadioStatEth 29 }
+
+ethTXLateCollisions OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx collisions occurred beyond
+ the collision window (512 bit times) since
+ the last unit (re)start or purification
+ of statistics."
+ ::= { ipRadioStatEth 30 }
+
+ethTXMaxCollisions OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx packets aborted after number
+ of collisions exceeded the RETRANSMISSION
+ MAXIMUM parameter since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 31 }
+
+ethTXExcessiveDefers OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx packets deferred in excess
+ of 6,071 nibble times in 100 Mbps mode,
+ or 24,287 bit-times in 10 Mbps mode since
+ the last unit (re)start or purification
+ of statistics."
+ ::= { ipRadioStatEth 32 }
+
+ethTXNonExcessiveDefers OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx packets deferred for at
+ least one attempt, but less than an
+ excessive defer since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 33 }
+
+ethTXBroadcasts OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx packets since the last unit
+ (re)start or purification of statistics,
+ which destination address contained
+ broadcast address."
+ ::= { ipRadioStatEth 34 }
+
+ethTXMulticasts OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx packets since the last unit
+ (re)start or purification of statistics,
+ which destination address contained
+ multicast address."
+ ::= { ipRadioStatEth 35 }
+
+ethTXDones OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of packets successfully transmitted
+ (Tx) since the last unit (re)start or
+ purification of statistics."
+ ::= { ipRadioStatEth 36 }
+
+-- ethTXOutOfRangeErrors OBJECT-TYPE
+-- SYNTAX Counter
+-- ACCESS read-only
+-- STATUS obsolete
+-- DESCRIPTION "Number of Tx frames since the last unit
+-- (re)start or purification of statistics
+-- where Type/Length field larger than 1518
+-- (Type Field) bytes."
+-- ::= { ipRadioStatEth 37 }
+
+ethTXLengthCheckErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx frames since the last unit
+ (re)start or purification of statistics,
+ where length field in the packet does not
+ match the actual data byte length and is
+ not a Type Field"
+ ::= { ipRadioStatEth 38 }
+
+ethTXCRCErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of Tx frames since the last unit
+ (re)start or purification of statistics,
+ where CRC does not match the internally
+ generated CRC."
+ ::= { ipRadioStatEth 39 }
+
+ethTXCollisions OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of collisions the current packet
+ incurred during transmission (Tx) attempts.
+ Note: Bits 19 through 16 are the collision
+ count on any successfully transmitted packet
+ and as such will not show the possible maximum
+ count of 16 collisions."
+ ::= { ipRadioStatEth 40 }
+
+ethTXByteCounterHi OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total count of bytes transmitted (Tx)
+ on the wire not including collided bytes
+ (bits 31:0) since the last unit (re)start
+ or purification of statistics."
+ ::= { ipRadioStatEth 41 }
+
+ethTXByteCounterLow OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total count of bytes transmitted (Tx)
+ on the wire not including collided bytes
+ (bits 62:32) since the last unit (re)start
+ or purification of statistics."
+ ::= { ipRadioStatEth 42 }
+
+--Counter64 data type is unsupported by SMIv1. Not expected
+--ethTXByteCounter64b OBJECT-TYPE
+-- SYNTAX Counter64
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION "Total count of bytes transmitted (Tx) on
+-- the wire not including collided bytes
+-- since the last unit (re)start or
+-- purification of statistics."
+-- ::= { ipRadioStatEth 43 }
+
+ethGFPFCSErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of generic framing procedure (GFP)
+ frames with CRC errors received by the
+ de-encapsulation block since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 44 }
+
+ethGFPCHECErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of generic framing procedure (GFP)
+ frames with CHEC errors received by the
+ de-encapsulation block since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 45 }
+
+ethGFPDropedFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of generic framing procedure (GFP)
+ frames that were dropped in the de-encapsulation
+ block since the last unit (re)start or
+ purification of statistics."
+ ::= { ipRadioStatEth 46 }
+
+ethGFPDelineationErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of 'lost of synchronization' events since
+ the last unit (re)start or purification of
+ statistics."
+ ::= { ipRadioStatEth 47 }
+
+ethQOSRXQ1Frames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames received on Q1 since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 48 }
+
+ethQOSRXQ1Dropped OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames dropped on Q1 since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 49 }
+
+ethQOSRXQ2Frames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames received on Q2 since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 50 }
+
+ethQOSRXQ2Dropped OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames dropped on Q2 since the last unit
+ (re)start or purification of statistics."
+ ::= { ipRadioStatEth 51 }
+
+ethQOSTXFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames passed through TX FIFO since the
+ last unit (re)start or purification of statistics."
+ ::= { ipRadioStatEth 52 }
+
+ethQOSTXDropped OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of frames dropped in TX FIFO since the last
+ unit (re)start or purification of statistics."
+ ::= { ipRadioStatEth 53 }
+
+e1t1StatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF E1t1StatEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "E1 (T1) status Table."
+ ::= { ipRadioStat 3 }
+
+e1t1StatEntry OBJECT-TYPE
+ SYNTAX E1t1StatEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing objects in E1 (T1) table"
+ AUGMENTS { ifEntry }
+ ::= { e1t1StatTable 1 }
+E1t1StatEntry ::=
+ SEQUENCE {
+ e1t1LOS INTEGER,
+ e1t1AIS INTEGER,
+ e1t1ChannelNr INTEGER -- 2009.07.13.
+ }
+
+ e1t1LOS OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "if signal loss present"
+ ::= { e1t1StatEntry 1 }
+
+ e1t1AIS OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "if AIS present"
+ ::= { e1t1StatEntry 2 }
+
+ e1t1ChannelNr OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "e1 channel number (it is not associated with interface number - ifEntry)"
+ ::= { e1t1StatEntry 3 }
+
+--modemStatistics
+
+-- Modem_Count_Time
+modemCountTime OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Count time in seconds"
+ ::= { modemStatistics 1 }
+
+modemErroredBlock OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Errored block"
+ ::= { modemStatistics 2 }
+
+modemErroredSecond OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Errored second"
+ ::= { modemStatistics 3 }
+
+modemSeverelyErroredSecond OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Severely errored second"
+ ::= { modemStatistics 4 }
+
+modemBackgroundBlockErrror OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Background Block Error"
+ ::= { modemStatistics 5 }
+
+modemTotalBlockNumber OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Total Block Number"
+ ::= { modemStatistics 6 }
+
+
+modemErroredSecondRatio OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Errored Second Ratio"
+ ::= { modemStatistics 7 }
+
+modemSeverelyErroredSecondRatio OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Severely Errored Second Ratio"
+ ::= { modemStatistics 8 }
+
+modemBackgroundBlockErrorRatio OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Background Block Error Ratio"
+ ::= { modemStatistics 9 }
+
+modemUptime OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Uptime (s)"
+ ::= { modemStatistics 10 }
+
+modemUnavailtime OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Unavailtime (s)"
+ ::= { modemStatistics 11 }
+
+--
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:15:39 +0000