summaryrefslogtreecommitdiff
path: root/MIBS/saf/SAF-MPMUX-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/saf/SAF-MPMUX-MIB')
-rw-r--r--MIBS/saf/SAF-MPMUX-MIB2929
1 files changed, 2929 insertions, 0 deletions
diff --git a/MIBS/saf/SAF-MPMUX-MIB b/MIBS/saf/SAF-MPMUX-MIB
new file mode 100644
index 0000000..2dabe93
--- /dev/null
+++ b/MIBS/saf/SAF-MPMUX-MIB
@@ -0,0 +1,2929 @@
+SAF-MPMUX-MIB DEFINITIONS ::= BEGIN
+
+-- Title: SAF SAF_MPMUX MIB version 2.15 in concise format
+-- Date: 2006.07.14
+-- By: Technical Support <techsupport@saftehnika.com>
+-- changes:
+-- 2010.02.09. - outputABCD R/W
+
+IMPORTS
+ enterprises, NetworkAddress, IpAddress,
+ Counter, Gauge, TimeTicks FROM RFC1155-SMI
+ OBJECT-TYPE FROM RFC-1212
+ DisplayString FROM RFC1213-MIB
+ TRAP-TYPE FROM RFC-1215;
+
+
+saf OBJECT IDENTIFIER ::= { enterprises 7571 }
+--old saf_ft OBJECT IDENTIFIER ::= { enterprises 4858 }
+tehnika OBJECT IDENTIFIER ::= { saf 100 }
+microwaveRadio OBJECT IDENTIFIER ::= { tehnika 1}
+pointToPoint OBJECT IDENTIFIER ::= { microwaveRadio 1 }
+
+cfm22 OBJECT IDENTIFIER ::= { pointToPoint 2 }
+mpmux OBJECT IDENTIFIER ::= { cfm22 22 }
+
+--mpmux ====================================================================
+terminal OBJECT IDENTIFIER ::= { mpmux 1 }
+--termProduct Text
+--termDescription Text
+--termLocation Text promt>
+--termVersion Text
+--termOperation integer ok, error,
+--termIduTemperature integer
+--termRfCablePowerStatus integer off, ok, short
+--termRestart ??? integer write restart ???
+
+baseband OBJECT IDENTIFIER ::= { mpmux 2 }
+--bbVersion Text
+--bbOperation integer
+--bbLinkCapacity integer Kbits
+--bbLinkCapacityDescr Text MUX 2M+2M+2M+2M
+--bbLoopback integer off, on
+--bbSyncLostAlarm integer off, on
+
+radio1 OBJECT IDENTIFIER ::= { mpmux 3 }
+--rf1Allarm integer off,on
+--rf1Version Text
+--rf1Side integer low,high
+--rf1Channel integer
+--rf1TxFrequency Text
+--rf1RxFrequency Text
+--rf1TxPower integer dBm
+--rf1RxState integer error, low, ok
+--rf1RxLevel integer dBm
+--rf1CableAtt integer dB
+--rf1TxOut integer error, ok
+--rf1TxPLL integer error, ok
+--rf1RxPLL integer error, ok
+--rf1OduTemperature integer
+--rf1Humidity integer low, high
+--rf1Loopback integer off, on
+--rf1RxAlarmLevel integer dBm
+radio2 OBJECT IDENTIFIER ::= { mpmux 4 }
+--look radio1
+switchCtrl OBJECT IDENTIFIER ::= { mpmux 5 }
+-- activeLink
+
+modules OBJECT IDENTIFIER ::= { mpmux 6 }
+m1 OBJECT IDENTIFIER ::= { modules 1 }
+m2 OBJECT IDENTIFIER ::= { modules 2 }
+m3 OBJECT IDENTIFIER ::= { modules 3 }
+m4 OBJECT IDENTIFIER ::= { modules 4 }
+
+--type integer e1(33),v35(37),bridge(43), f2bridge(242)
+--description Text
+--version Text
+--speed integer 2048 Kbits
+--oper integer none(0),booting(1),ok(2),testing(3),
+-- loopback(4),illegalSpeed(5),error(6)
+--rx integer none(0),ok(1),noSignal(2),noLink(3),rxAIS(4),error(5)
+--tx integer none(0),ok(1),txAIS(4),error(5)
+--loopback integer off(0),on(1)
+--rxInput integer other(0),coax(1),rj45(2),v35(3)
+--txMode integer other(0),halfDuplex(1),fullDuplex(2)
+--txClockSource integer other(0),master(1),slave(2)
+--txClockPhase integer other(0),normal(1),inverse(2)
+--dataPolarity integer other(0),normal(1),inverse(2)
+
+termProduct OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual name of the model."
+ ::= { terminal 1 }
+
+termDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual description of the model."
+ ::= { terminal 2 }
+
+
+termLocation OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Textual description of location (same as PROMT>)."
+ ::= { terminal 3 }
+
+termVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { terminal 4 }
+
+termOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ error(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System operation."
+ ::= { terminal 5 }
+
+termIduTemperature OBJECT-TYPE
+ SYNTAX INTEGER(-128..127)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { terminal 6 }
+
+-- termRfCablePowerStatus OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- off(0),
+-- ok(1),
+-- short(2),
+-- error(3)
+-- }
+-- ACCESS read-only
+-- STATUS obsolete
+-- DESCRIPTION
+-- "Look at termRf1CablePowerStatus and termRf2CablePowerStatus"
+-- ::= { terminal 7 }
+
+-- termUpTime OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS obsolete
+-- DESCRIPTION
+-- "Integer variable."
+-- ::= { terminal 8 }
+
+
+-- termDownTime OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS obsolete
+-- DESCRIPTION
+-- "Integer variable."
+-- ::= { terminal 9 }
+
+termFrameErrors OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable. "
+ ::= { terminal 10 }
+
+writeConfig OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Write Config"
+ ::= { terminal 11 }
+
+restartCPU OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Restart CPU"
+ ::= { terminal 12 }
+
+serialNumber OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Serial number"
+ ::= { terminal 13 }
+
+termRf1CablePowerStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ ok(1),
+ short(2),
+ error(3),
+ power-off(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Cable status from ODU1"
+ ::= { terminal 14 }
+termRf2CablePowerStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ ok(1),
+ short(2),
+ error(3),
+ power-off(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Cable status from ODU2"
+ ::= { terminal 15 }
+
+-- PW 1
+power3V3PS1 OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU power voltage +3.3V"
+ ::= { terminal 16 }
+
+power5VPS1 OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU power voltage +5V"
+ ::= { terminal 17 }
+
+powerM5VPS1 OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU power voltage -5V"
+ ::= { terminal 18 }
+
+powerODU1V OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ODU power voltage (V)"
+ ::= { terminal 19 }
+
+powerODU1I OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ODU power current (A)"
+ ::= { terminal 20 }
+
+powerODU1W OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ODU power (W)"
+ ::= { terminal 21 }
+-- PW 2
+power3V3PS2 OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU power voltage +3.3V"
+ ::= { terminal 22 }
+
+power5VPS2 OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU power voltage +5V"
+ ::= { terminal 23 }
+
+powerM5VPS2 OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU power voltage -5V"
+ ::= { terminal 24 }
+
+powerODU2V OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ODU power voltage (V)"
+ ::= { terminal 25 }
+
+powerODU2I OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ODU power current (A)"
+ ::= { terminal 26 }
+
+powerODU2W OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ODU power (W)"
+ ::= { terminal 27 }
+
+-- end PW 1 2
+
+cpuUsage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CPU usage [%]"
+ ::= { terminal 28 }
+
+termBFrameErr OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Background block errors"
+ ::= { terminal 29 }
+
+termStatCountTime OBJECT-TYPE
+ SYNTAX Gauge
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Stat. count. time"
+ ::= { terminal 30 }
+
+termErroredSecond OBJECT-TYPE
+ SYNTAX Gauge
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Err. seconds"
+ ::= { terminal 31 }
+
+termSeverelyErroredSecond OBJECT-TYPE
+ SYNTAX Gauge
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Severe err. seconds"
+ ::= { terminal 32 }
+
+termSyncLostTime OBJECT-TYPE
+ SYNTAX Gauge
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Sync lost time"
+ ::= { terminal 33 }
+
+termAvailableTime OBJECT-TYPE
+ SYNTAX Gauge
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available time"
+ ::= { terminal 34 }
+termUnAvailableTime OBJECT-TYPE
+ SYNTAX Gauge
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unavailable time"
+ ::= { terminal 35 }
+
+termBer OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual representation of BER"
+ ::= { terminal 36 }
+berAlarm OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The BER alarm"
+ ::= { terminal 37 }
+remoteAlarm OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Remote alarm"
+ ::= { terminal 38 }
+systemAlarm OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The SYSTEM alarm"
+ ::= { terminal 39 }
+
+inputABCD OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Input sensor"
+ ::= { terminal 40 }
+
+outputABCD OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Output relays"
+ ::= { terminal 41 }
+
+termBerInPwOf10 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "The Power of 10 part of termBer"
+ ::= { terminal 42 }
+
+outputMaskABCD OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Output relay bit mask.
+ If the correspondig bit is
+ 0 - the output bit can be changed manualy
+ 1 - the output bit changes automaticaly (according to sync lost, radio allarm etc.)"
+ ::= { terminal 43 }
+
+-- ****** Basebend ***************************************************
+--bbVersion Text
+--bbOperation integer
+--bbLinkCapacity integer Kbits
+--bbLinkCapacityDescr Text MUX 2M+2M+2M+2M
+--bbLoopback integer off, on
+--bbSyncLostAlarm integer off, on
+
+bbVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { baseband 1 }
+
+bbOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ loopback(4),
+ illegalSpeed(5),
+ error(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System operation."
+ ::= { baseband 2 }
+
+bbLinkCapacity OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { baseband 3 }
+
+bbLinkCapacityDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { baseband 4 }
+
+bbLoopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ digital(1),
+ analog(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback Integer variable."
+ ::= { baseband 5 }
+
+bbSyncLostAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ on(1) -- Alarm ON
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The SYncLostAlarm."
+ ::= { baseband 6 }
+
+-- ****** Radio1 *****************************************************
+
+rf1Operation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ error(4),
+ noDataFromODU(5)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Radio operation."
+ ::= { radio1 1 }
+
+rf1Alarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ on(1) -- Alarm ON
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RadioAlarm."
+ ::= { radio1 2 }
+
+rf1Version OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { radio1 3 }
+
+rf1Side OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Side."
+ ::= { radio1 4 }
+
+rf1Channel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 5 }
+
+rf1TxFrequency OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { radio1 6 }
+
+rf1RxFrequency OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { radio1 7 }
+
+rf1TxPower OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 8 }
+
+rf1RxState OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ ok(1),
+ error(2),
+ loopback(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The rx State."
+ ::= { radio1 9 }
+
+rf1RxLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 10 }
+
+rf1CableAttenuation OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 11 }
+
+rf1TxOut OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ ok(1),
+ off(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Tx out."
+ ::= { radio1 12 }
+
+
+rf1TxPLL OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ ok(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The txPLL."
+ ::= { radio1 13 }
+
+rf1RxPLL OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ ok(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The rxPLL."
+ ::= { radio1 14 }
+
+rf1OduTemperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 15 }
+
+rf1OduHumidity OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ODU Humidity."
+ ::= { radio1 16 }
+
+rf1Loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback Integer variable."
+ ::= { radio1 17 }
+
+rf1RxAlarmLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 18 }
+-- new 2005.05.17
+rf1txfstart OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 19 }
+rf1duplexshift OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 20 }
+rf1chstep OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 21 }
+rf1chstart OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 22 }
+rf1chend OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 23 }
+rf1txpwmin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 24 }
+rf1txpwmax OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 25 }
+rf1txpwstep OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio1 26 }
+--rf1subbands OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION
+-- "Integer variable."
+-- ::= { radio1 27 }
+
+
+-- ****** Radio2 *****************************************************
+
+rf2Operation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ error(4),
+ noDataFromODU(5)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Radio operation."
+ ::= { radio2 1 }
+
+rf2Alarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ on(1) -- Alarm ON
+ }
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "The RadioAlarm. -> rf1Alarm"
+ ::= { radio2 2 }
+
+rf2Version OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { radio2 3 }
+
+rf2Side OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Side."
+ ::= { radio2 4 }
+
+rf2Channel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 5 }
+
+rf2TxFrequency OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { radio2 6 }
+
+rf2RxFrequency OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual version."
+ ::= { radio2 7 }
+
+rf2TxPower OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 8 }
+
+rf2RxState OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ ok(1),
+ error(2),
+ loopback(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The rx State."
+ ::= { radio2 9 }
+
+rf2RxLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 10 }
+
+rf2CableAttenuation OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 11 }
+
+rf2TxOut OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ ok(1),
+ off(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Tx out."
+ ::= { radio2 12 }
+
+
+rf2TxPLL OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ ok(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The txPLL."
+ ::= { radio2 13 }
+
+rf2RxPLL OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ ok(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The rxPLL."
+ ::= { radio2 14 }
+
+rf2OduTemperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 15 }
+
+rf2OduHumidity OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ODU Humidity."
+ ::= { radio2 16 }
+
+rf2Loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback Integer variable."
+ ::= { radio2 17 }
+
+rf2RxAlarmLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 18 }
+
+-- new 2005.05.17
+rf2txfstart OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 19 }
+rf2duplexshift OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 20 }
+rf2chstep OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 21 }
+rf2chstart OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 22 }
+rf2chend OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 23 }
+rf2txpwmin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 24 }
+rf2txpwmax OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 25 }
+rf2txpwstep OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { radio2 26 }
+--rf2subbands OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-only
+-- STATUS optional
+-- DESCRIPTION
+-- "Integer variable."
+-- ::= { radio2 27 }
+
+
+-- switchCtrl ====================
+activeLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0), -- none of the following
+ link1(1),
+ link2(2),
+ error(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 1 }
+
+activeTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ link1(1),
+ link2(2),
+ both(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 2 }
+
+preferedLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0), -- none of the following
+ link1(1),
+ link2(2),
+ error(255)
+ }
+ ACCESS read-write
+ STATUS optional
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 3 }
+
+forcedLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0), -- none of the following
+ link1(1),
+ link2(2),
+ error(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 4 }
+
+switchMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0), -- none of the following
+ freqDiv(1),
+ hotStandby(2),
+ independent(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 5 }
+
+odu1RxMax OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 6 }
+
+odu2RxMax OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 7 }
+
+odu1RxMin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 8 }
+
+odu2RxMin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 9 }
+
+rxDelta OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Integer variable."
+ ::= { switchCtrl 10 }
+
+rxBER OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maximum value of allowed BER"
+ ::= { switchCtrl 11 }
+
+switchDelay OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay (s)"
+ ::= { switchCtrl 12 }
+
+
+switchEnabledForRxBer OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/disable swithing for Rx and BER"
+ ::= { switchCtrl 13 }
+
+switchReason OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+" 100 - command SWITCH FORCE OFF
+ 101 - command SWITCH FORCE 1
+ 102 - command SWITCH FORCE 2
+ 103 - command SWITCH ACTIVE 1
+ 104 - command SWITCH ACTIVE 2
+ 105 - active ODU changed from 1
+ to 2 because of power problems in ODU1
+ 106 - active ODU changed from 2
+ to 2 because of power problems in ODU2
+ 107 - active ODU changed from 1
+ to 2 because of cable problems in ODU1
+ 108 - active ODU changed from 2
+ to 1 because of cable problems in ODU2
+ 109 - active ODU changed from 1
+ to 2 because of SyncLoss problems when active ODU1
+ 110 - active ODU changed from 2
+ to 1 because of SyncLoss problems when active ODU2
+ 111 - active ODU changed from 1
+ to 2 because of RAI problems when active ODU1
+ 112 - active ODU changed from 2
+ to 1 because of RAI problems when active ODU2
+ 113 - active ODU changed from 1
+ to 2 because of RXLEV problems in ODU1
+ 114 - active ODU changed from 2
+ to 1 because of RXLEV problems in ODU2
+ 115 - active ODU changed from 1
+ to 2 because of BER problems when active ODU1
+ 116 - active ODU changed from 2
+ to 1 because of BER problems when active ODU2"
+ ::= { switchCtrl 14 }
+
+
+-- ***** modules *********************************************************
+
+-- ****** m1 **************************
+m1Type OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ e1x1(30),
+ e1(33),
+ v35(37),
+ bridge(43),
+ eow64(100),
+ e3(227),
+ t1x4(74),
+ e1x4(78),
+ f1bridge(241),
+ f2bridge(242),
+ none(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The module type."
+ ::= { m1 1 }
+
+m1Description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual description of the module."
+ ::= { m1 2 }
+
+
+m1Version OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Textual version."
+ ::= { m1 3 }
+
+m1Speed OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data speed Integer variable Kbit."
+ ::= { m1 4 }
+
+m1Operation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ loopback(4),
+ illegalSpeed(5),
+ error(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module operation statuss."
+ ::= { m1 5 }
+
+m1Rx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ rxAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx statuss."
+ ::= { m1 6 }
+
+m1Tx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ txAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx statuss."
+ ::= { m1 7 }
+
+m1Loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ analog(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Loopback Integer variable."
+ ::= { m1 8 }
+
+m1RxInput OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ coax(1),
+ rj45(2),
+ v35(3),
+ e3(4),
+ db25unbalanced(5),
+ db25balanced(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx Input."
+ ::= { m1 9 }
+
+m1TxMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ halfDuplex(1),
+ fullDuplex(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx duplex mode."
+ ::= { m1 10 }
+
+
+m1TxClockSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ master(1),
+ slave(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock source."
+ ::= { m1 11 }
+
+
+m1TxClockPhase OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock Phase."
+ ::= { m1 12 }
+
+m1DataPolarity OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data."
+ ::= { m1 13 }
+
+m1ChanCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of data channels"
+ ::= { m1 14 }
+
+-- ****** m2 **************************
+m2Type OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ e1x1(30),
+ e1(33),
+ v35(37),
+ bridge(43),
+ eow64(100),
+ e3(227),
+ t1x4(74),
+ e1x4(78),
+ f1bridge(241),
+ f2bridge(242),
+ none(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The module type."
+ ::= { m2 1 }
+
+m2Description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual description of the module."
+ ::= { m2 2 }
+
+
+m2Version OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Textual version."
+ ::= { m2 3 }
+
+m2Speed OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data speed Integer variable Kbit."
+ ::= { m2 4 }
+
+m2Operation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ loopback(4),
+ illegalSpeed(5),
+ error(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module operation statuss."
+ ::= { m2 5 }
+
+m2Rx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ rxAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx statuss."
+ ::= { m2 6 }
+
+m2Tx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ txAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx statuss."
+ ::= { m2 7 }
+
+m2Loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ analog(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback Integer variable."
+ ::= { m2 8 }
+
+m2RxInput OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ coax(1),
+ rj45(2),
+ v35(3),
+ e3(4),
+ db25unbalanced(5),
+ db25balanced(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx Input."
+ ::= { m2 9 }
+
+m2TxMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ halfDuplex(1),
+ fullDuplex(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx duplex mode."
+ ::= { m2 10 }
+
+
+m2TxClockSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ master(1),
+ slave(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock source."
+ ::= { m2 11 }
+
+
+m2TxClockPhase OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock Phase."
+ ::= { m2 12 }
+
+m2DataPolarity OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data."
+ ::= { m2 13 }
+
+m2ChanCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of data channels"
+ ::= { m2 14 }
+
+-- ****** m3 **************************
+m3Type OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ e1x1(30),
+ e1(33),
+ v35(37),
+ bridge(43),
+ eow64(100),
+ e3(227),
+ t1x4(74),
+ e1x4(78),
+ f1bridge(241),
+ f2bridge(242),
+ none(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The module type."
+ ::= { m3 1 }
+
+m3Description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual description of the module."
+ ::= { m3 2 }
+
+
+m3Version OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Textual version."
+ ::= { m3 3 }
+
+m3Speed OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data speed Integer variable Kbit."
+ ::= { m3 4 }
+
+m3Operation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ loopback(4),
+ illegalSpeed(5),
+ error(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module operation statuss."
+ ::= { m3 5 }
+
+m3Rx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ rxAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx statuss."
+ ::= { m3 6 }
+
+m3Tx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ txAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx statuss."
+ ::= { m3 7 }
+
+m3Loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ analog(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback Integer variable."
+ ::= { m3 8 }
+
+
+m3RxInput OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ coax(1),
+ rj45(2),
+ v35(3),
+ e3(4),
+ db25unbalanced(5),
+ db25balanced(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx Input."
+ ::= { m3 9 }
+
+m3TxMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ halfDuplex(1),
+ fullDuplex(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx duplex mode."
+ ::= { m3 10 }
+
+
+m3TxClockSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ master(1),
+ slave(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock source."
+ ::= { m3 11 }
+
+
+m3TxClockPhase OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock Phase."
+ ::= { m3 12 }
+
+m3DataPolarity OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data."
+ ::= { m3 13 }
+
+m3ChanCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of data channels"
+ ::= { m3 14 }
+
+-- ****** m4 **************************
+m4Type OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ e1x1(30),
+ e1(33),
+ v35(37),
+ bridge(43),
+ eow64(100),
+ e3(227),
+ t1x4(74),
+ e1x4(78),
+ f1bridge(241),
+ f2bridge(242),
+ none(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The module type."
+ ::= { m4 1 }
+
+m4Description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Textual description of the module."
+ ::= { m4 2 }
+
+
+m4Version OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Textual version."
+ ::= { m4 3 }
+
+m4Speed OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data speed Integer variable Kbit."
+ ::= { m4 4 }
+
+m4Operation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ booting(1),
+ ok(2),
+ testing(3),
+ loopback(4),
+ illegalSpeed(5),
+ error(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module operation statuss."
+ ::= { m4 5 }
+
+m4Rx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ rxAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx statuss."
+ ::= { m4 6 }
+
+m4Tx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ ok(1),
+ noSignal(2),
+ noLink(3),
+ txAIS(4),
+ error(5),
+ noData(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx statuss."
+ ::= { m4 7 }
+
+m4Loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ analog(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback Integer variable."
+ ::= { m4 8 }
+
+
+m4RxInput OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ coax(1),
+ rj45(2),
+ v35(3),
+ e3(4),
+ db25unbalanced(5),
+ db25balanced(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Rx Input."
+ ::= { m4 9 }
+
+m4TxMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ halfDuplex(1),
+ fullDuplex(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx duplex mode."
+ ::= { m4 10 }
+
+
+m4TxClockSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ master(1),
+ slave(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock source."
+ ::= { m4 11 }
+
+
+m4TxClockPhase OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module Tx clock Phase."
+ ::= { m4 12 }
+
+m4DataPolarity OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(0),
+ normal(1),
+ inverse(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Module data."
+ ::= { m4 13 }
+
+m4ChanCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of data channels"
+ ::= { m4 14 }
+
+m1port1 OBJECT IDENTIFIER ::= { m1 21 }
+m1port2 OBJECT IDENTIFIER ::= { m1 22 }
+m1port3 OBJECT IDENTIFIER ::= { m1 23 }
+m1port4 OBJECT IDENTIFIER ::= { m1 24 }
+m2port1 OBJECT IDENTIFIER ::= { m2 21 }
+m2port2 OBJECT IDENTIFIER ::= { m2 22 }
+m2port3 OBJECT IDENTIFIER ::= { m2 23 }
+m2port4 OBJECT IDENTIFIER ::= { m2 24 }
+m3port1 OBJECT IDENTIFIER ::= { m3 21 }
+m3port2 OBJECT IDENTIFIER ::= { m3 22 }
+m3port3 OBJECT IDENTIFIER ::= { m3 23 }
+m3port4 OBJECT IDENTIFIER ::= { m3 24 }
+m4port1 OBJECT IDENTIFIER ::= { m4 21 }
+m4port2 OBJECT IDENTIFIER ::= { m4 22 }
+m4port3 OBJECT IDENTIFIER ::= { m4 23 }
+m4port4 OBJECT IDENTIFIER ::= { m4 24 }
+
+m1p1statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port1 1 }
+
+m1p1connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m1port1 2 }
+
+m1p1flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port1 3 }
+
+m1p1priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port1 4 }
+
+m1p1loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m1port1 5 }
+
+m1p2statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port2 1 }
+
+m1p2connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m1port2 2 }
+
+m1p2flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port2 3 }
+
+
+m1p2priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port2 4 }
+
+m1p2loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m1port2 5 }
+
+m1p3statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port3 1 }
+
+m1p3connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m1port3 2 }
+
+m1p3flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port3 3 }
+
+m1p3priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port3 4 }
+
+
+m1p3loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m1port3 5 }
+
+m1p4statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port4 1 }
+
+m1p4connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m1port4 2 }
+
+m1p4flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port4 3 }
+
+m1p4priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m1port4 4 }
+
+m1p4loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m1port4 5 }
+
+m2p1statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port1 1 }
+
+m2p1connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m2port1 2 }
+
+m2p1flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port1 3 }
+
+m2p1priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port1 4 }
+
+m2p1loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m2port1 5 }
+
+m2p2statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port2 1 }
+
+m2p2connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m2port2 2 }
+
+m2p2flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port2 3 }
+
+m2p2priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port2 4 }
+
+m2p2loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m2port2 5 }
+
+m2p3statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port3 1 }
+
+m2p3connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m2port3 2 }
+
+m2p3flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port3 3 }
+
+m2p3priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port3 4 }
+
+m2p3loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m2port3 5 }
+
+m2p4statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port4 1 }
+
+m2p4connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m2port4 2 }
+
+m2p4flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port4 3 }
+
+m2p4priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m2port4 4 }
+
+m2p4loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m2port4 5 }
+
+m3p1statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port1 1 }
+
+m3p1connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m3port1 2 }
+
+m3p1flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port1 3 }
+
+m3p1priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port1 4 }
+
+m3p1loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m3port1 5 }
+
+m3p2statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port2 1 }
+
+m3p2connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m3port2 2 }
+
+m3p2flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port2 3 }
+
+m3p2priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port2 4 }
+
+m3p2loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m3port2 5 }
+
+m3p3statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port3 1 }
+
+m3p3connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m3port3 2 }
+
+m3p3flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port3 3 }
+
+m3p3priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port3 4 }
+
+m3p3loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m3port3 5 }
+
+m3p4statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port4 1 }
+
+m3p4connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m3port4 2 }
+
+m3p4flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port4 3 }
+
+m3p4priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m3port4 4 }
+
+m3p4loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m3port4 5 }
+
+m4p1statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port1 1 }
+
+m4p1connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m4port1 2 }
+
+m4p1flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port1 3 }
+
+m4p1priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port1 4 }
+
+m4p1loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m4port1 5 }
+
+m4p2statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port2 1 }
+
+m4p2connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m4port2 2 }
+
+m4p2flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port2 3 }
+
+m4p2priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port2 4 }
+
+m4p2loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m4port2 5 }
+
+m4p3statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port3 1 }
+
+m4p3connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m4port3 2 }
+
+m4p3flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port3 3 }
+
+m4p3priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port3 4 }
+
+m4p3loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m4port3 5 }
+
+m4p4statbin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port4 1 }
+
+m4p4connection OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0), -- none of the following
+ auto(1),
+ eth10fdx(2),
+ eth10hdx(3),
+ eth100fdx(4),
+ eth100hdx(5),
+ ds1(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Note: ds1 means E1 or T1"
+ ::= { m4port4 2 }
+
+
+m4p4flowcntrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port4 3 }
+
+m4p4priority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ ""
+ ::= { m4port4 4 }
+
+m4p4loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ analog(1),
+ remote(2),
+ digital(4),
+ remoteANDdigital(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "loopback"
+ ::= { m4port4 5 }
+
+--mpmux ==================================================================
+
+
+alarmTrap TRAP-TYPE
+ ENTERPRISE mpmux
+ VARIABLES
+ {
+ rfAlarm,
+ bbSyncLostAlarm,
+ berAlarm,
+ remoteAlarm,
+ systemAlarm
+ }
+ DESCRIPTION
+ "SAF management Alarm trap."
+ ::= 0
+
+alinkTrap TRAP-TYPE
+ ENTERPRISE mpmux
+ VARIABLES
+ {
+ activeLink
+ }
+ DESCRIPTION
+ "SAF Active Link trap."
+ ::= 1
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 13:38:19 +0000