diff options
Diffstat (limited to 'MIBS/siae/SIAE-PTP-MIB')
| -rw-r--r-- | MIBS/siae/SIAE-PTP-MIB | 2053 |
1 files changed, 2053 insertions, 0 deletions
diff --git a/MIBS/siae/SIAE-PTP-MIB b/MIBS/siae/SIAE-PTP-MIB new file mode 100644 index 0000000..242fb6d --- /dev/null +++ b/MIBS/siae/SIAE-PTP-MIB @@ -0,0 +1,2053 @@ +-- ---------------------------------------------------------------------------- +-- +-- SIAE MICROELETTRONICA s.p.a. +-- +-- Via Michelangelo Buonarroti, 21 +-- 20093 - Cologno Monzese +-- Milano +-- ITALY +-- +-- ---------------------------------------------------------------------------- +-- ---------------------------------------------------------------------------- + +SIAE-PTP-MIB + DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 + FROM SNMPv2-SMI + DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION + FROM SNMPv2-TC + InterfaceIndex + FROM IF-MIB + siaeMib + FROM SIAE-TREE-MIB + AlarmStatus, AlarmSeverityCode + FROM SIAE-ALARM-MIB; + + ptp MODULE-IDENTITY + LAST-UPDATED "201605050000Z" + ORGANIZATION "SIAE MICROELETTRONICA spa" + CONTACT-INFO + "SIAE MICROELETTONICA s.p.a. + Via Michelangelo Buonarroti, 21 + 20093 - Cologno Monzese + Milano - ITALY + Phone : +39-02-27325-1 + E-mail: help@siaemic.com + " + DESCRIPTION + "SIAE's Precision Time Protocol MIB. + For details see: + [1] IEEE Std 1588(TM)-2008, Standard for a Precision Clock + Synchronization Protocol for Networked Measurement and + Control Systems, 2008. + [2] Recommendation ITU-T G.8275.1/Y1369.1, Precision time protocol + telecom profile for phase/time synchronization with full timing + support from the network, draft 4 Apr 2014 . " + ::= { siaeMib 100 } + +-- +-- Textual Conventions for PTP +-- + + ClockDomainType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The Domain is identified by an integer, the domainNumber, in + the range of 0 to 255. An integer value that is used to assign + each PTP device to a particular domain. The following values + define the valid domains. [1] Section 7.1 Domains Table 2 + + Value definition. + --------- ------------------- + 0 Default domain + 1 Alternate domain 1 + 2 Alternate domain 2 + 3 Alternate domain 3 + 4 - 23 User-defined domains + 24 - 43 Telecom Profile domains + 44 - 127 User-defined domains + 128 - 255 Reserved" + + REFERENCE "Section 7.1 Domains and Table 2 of [1]" + SYNTAX Unsigned32 (24..43) + + ClockProfileType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Clock Profile used. A profile is the set of allowed Precision + Time Protocol (PTP) features applicable to a device." + + REFERENCE "Section 3.1.30 and 19.3 PTP profiles of + [IEEE 1588-2008]" + SYNTAX INTEGER { + default(1), + telecom(2), + vendorspecific(3) + } + + ClockQualityAccuracyType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The ClockQuality as specified in section 5.3.7, 7.6.2.5 and + Table 6 of [1]. + + The following values are not represented in the enumerated + values. + + 0x01-0x1F Reserved + 0x32-0x7F Reserved + + It is important to note that section 7.1.1 RFC2578 allows for + gaps and enumerate values to start with zero when indicated by + the protocol." + + REFERENCE "Section 5.3.7, 7.6.2.5 and Table 6 of [1]" + SYNTAX INTEGER { + reserved00(1), -- 0 + nanoSecond25(32), -- 0x20 + nanoSecond100(33), -- 0x21 + nanoSecond250(34), -- 0x22 + microSec1(35), -- 0x23 + microSec2dot5(36), -- 0x24 + microSec10(37), -- 0x25 + microSec25(38), -- 0x26 + microSec100(39), -- 0x27 + microSec250(40), -- 0x28 + milliSec1(41), -- 0x29 + milliSec2dot5(42), -- 0x2A + milliSec10(43), -- 0x2B + milliSec25(44), -- 0x2C + milliSec100(45), -- 0x2D + milliSec250(46), -- 0x2E + second1(47), -- 0x2F + second10(48), -- 0x30 + secondGreater10(49), -- 0x31 + unknown(254), -- 0xFE + reserved255(255) -- 0xFF + } + + ClockQualityClassType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The ClockQuality as specified in section 5.3.7, 7.6.2.4 and + Table 5 of [1]. + + Value Description + ------ + ---------------------------------------------------------- + 0 Reserved to enable compatibility with future + versions. + 1-5 Reserved + 6 Shall designate a clock that is synchronized + to a primary reference time source. The + timescale distributed shall be PTP. A + clockClass 6 clock shall not be a slave to + another clock in the domain. + 7 Shall designate a clock that has previously + been designated as clockClass 6 but that has + lost the ability to synchronize to a primary + reference time source and is in holdover mode + and within holdover specifications. The + timescale distributed shall be PTP. A + clockClass 7 clock shall not be a slave to + another clock in the domain. + 8 Reserved. + 9-10 Reserved to enable compatibility with future + versions. + 11-12 Reserved. + 13 Shall designate a clock that is synchronized + to an application-specific source of time. + The timescale distributed shall be ARB. A + clockClass 13 clock shall not be a slave to + another clock in the domain. + 14 Shall designate a clock that has previously + been designated as clockClass 13 but that + has lost the ability to synchronize to an + application-specific source of time and is + in holdover mode and within holdover + specifications. The timescale distributed + shall be ARB. A clockClass 14 clock shall + not be a slave to another clock in the domain. + 15-51 Reserved. + 52 Degradation alternative A for a clock of + clockClass 7 that is not within holdover + specification. A clock of clockClass 52 + shall not be a slave to another clock in + the domain. + 53-57 Reserved. + 58 Degradation alternative A for a clock of + clockClass 14 that is not within holdover + specification. A clock of clockClass 58 shall + not be a slave to another clock in the domain. + 59-67 Reserved. + 68-122 For use by alternate PTP profiles. + 123-127 Reserved. + 128-132 Reserved. + 133-170 For use by alternate PTP profiles. + 171-186 Reserved. + + 187 Degradation alternative B for a clock of + clockClass 7 that is not within holdover + specification. A clock of clockClass 187 may + be a slave to another clock in the domain. + 188-192 Reserved. + 193 Degradation alternative B for a clock of + clockClass 14 that is not within holdover + specification. A clock of clockClass 193 may + be a slave to another clock in the domain. + 194-215 Reserved. + 216-232 For use by alternate PTP profiles. + 233-247 Reserved. + 248 Default. This clockClass shall be used if + none of the other clockClass definitions apply. + 249-250 Reserved. + 251 Reserved for version 1 compatibility; see Clause 18. + 252-254 Reserved. + 255 Shall be the clockClass of a slave-only clock; see + 9.2.2. + + The ClockQuality as specified in section 6.4 and + Table 2 of [2]. + + Value Description + ------ + ---------------------------------------------------------- + 6 T-GM connected to a PRTC in locked mode + (e.g. PRTC traceable to GNSS) + 140 T-GM in holdover, out of holdover specification, + traceable to Category 1 frequency source + 150 T-GM in holdover, out of holdover specification, + traceable to Category 2 frequency source + 160 T-GM in holdover, out of holdover specification, + traceable to Category 3 frequency source + 165 T-BC in holdover, out of holdover specification, + using unspecified frequency source + 255 Slave only OC (does not send Announce messages) + + " + + REFERENCE "section 5.3.7, 7.6.2.4 and Table 5 of [1]. + section 6.4 and Table 2 of [2]" + SYNTAX INTEGER (0..255) + + ClockStateType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The clock state returned by PTP engine. + + Clock State Value Description + -------------------------------------------------------------- + Freerun state 1 The PTP clock has never been synchronized + to a time source and is not in the process + of synchronizing to a time source. + As it relates to the PTP port state defined + in [IEEE 1588], a clock is in Free-Run state + if there are no PTP ports in: MASTER, + PRE-MASTER, PASSIVE, UNCALIBRATED, + or SLAVE states. + + Acquiring state 2 The PTP clock is in process of synchronizing + to a time source. The duration and functionality + of this state is implementation specific. This + state is not required in an implementation. + As it relates to the PTP port state defined in + [IEEE 1588], a clock is in Acquiring state if + there is a PTP port in UNCALIBRATED state. + + Locked state 3 The PTP clock is synchronized to a time source + and is within some internal acceptable accuracy. + As it relates to the PTP port state defined in + [IEEE 1588], a clock is in Locked state if there + is a PTP port in SLAVE state. + + HoldoverInSpec state 4 The PTP clock is no longer synchronized to a + time source and is using information obtained + while it was previously synchronized or other + information sources were still available, to + maintain performance within desired specification. + The node may be relying solely on its own + facilities for holdover or may use something + like a frequency input from the network to + achieve a holdover of time and/or phase. + As it relates to the PTP port state defined in + [IEEE 1588], a clock is in HoldoverInSpec + state if there are no PTP ports in: INITIALIZING, + LISTENING, UNCALIBRATED or SLAVE states, and + performance is within desired specification. + + HoldoverOutOfSpec state 5 The PTP clock is no longer synchronized to a time + source and, while it may be using information + obtained while it was previously synchronized or + other information sources were still available, + it is unable to maintain performance within + desired specification. + As it relates to the PTP port state defined in + [IEEE 1588], a clock is in HoldoverOutOfSpec + state if there are no PTP ports in: INITIALIZING, + LISTENING, UNCALIBRATED or SLAVE states, and + performance is not within desired specification." + SYNTAX INTEGER { + freerun(1), + acquiring(2), + locked(3), + holdoverInSpec(4), + holdoverOutOfSpec(5) + } + + ClockTimeSourceType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The ClockQuality as specified in section 5.3.7, 7.6.2.6 and + Table 7 of [1]. + + The following values are not represented in the enumerated + values. + + 0xF0-0xFE For use by alternate PTP profiles + 0xFF Reserved + + It is important to note that section 7.1.1 RFC2578 allows for + gaps and enumerate values to start with zero when indicated by + the protocol." + + REFERENCE "section 5.3.7, 7.6.2.6 and Table 7 of [1]." + SYNTAX INTEGER { + atomicClock(16), -- 0x10 + gps(32), -- 0x20 + terrestrialRadio(48), -- 0x22 + ptp(64), -- 0x40 + ntp(80), -- 0x50 + handSet(96), -- 0x60 + other(144), -- 0x90 + internalOscillator(160), -- 0xA0 + reserved(255) --0xFF + } + + ClockInstanceType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The instance of the Clock of a given clock type in a given + domain." + SYNTAX Unsigned32 (0..255) + + + ClockPPSInstanceType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The instance of the PPS (and ToD) socket." + SYNTAX Unsigned32 (0..255) + + + ClockPortNumber ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "An index identifying a specific Precision Time Protocol (PTP) + port on a PTP node." + REFERENCE "Section 7.5.2.3 Port Number and 5.3.5 of [1]" + SYNTAX Unsigned32 (0..65535) + + + ClockPortState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is the value of the current state of the protocol engine + associated with this port. + Port state Value Description + ----------------------------------------------------------- + initializing 1 In this state a port initializes + its data sets, hardware, and + communication facilities. + faulty 2 The fault state of the protocol. + disabled 3 The port shall not place any + messages on its communication path. + listening 4 The port is waiting for the + announceReceiptTimeout to expire or + to receive an Announce message from + a master. + preMaster 5 The port shall behave in all respects + as though it were in the MASTER state + except that it shall not place any + messages on its communication path + except for Pdelay_Req, Pdelay_Resp, + Pdelay_Resp_Follow_Up, signaling, or + management messages. + master 6 The port is behaving as a master + port. + passive 7 The port shall not place any + messages on its communication path + except for Pdelay_Req, Pdelay_Resp, + Pdelay_Resp_Follow_Up, or signaling + messages, or management messages + that are a required response to + another management message + uncalibrated 8 The local port is preparing to + synchronize to the master port. + slave 9 The port is synchronizing to the + selected master port." + + REFERENCE "Section 8.2.5.3.1 portState and 9.2.5 of [1]" + SYNTAX INTEGER { + initializing(1), + faulty(2), + disabled(3), + listening(4), + preMaster(5), + master(6), + passive(7), + uncalibrated(8), + slave(9) + } + + ClockMechanismType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The clock type based on whether End to End or peer to peer + mechanisms are used. The mechanism used to calculate the Mean + Path Delay as indicated in Table 9 of IEEE 1588-2008. + + Delay mechanism Value(hex) Specification + E2E 01 The port is configured to use + the delay request-response + mechanism. + + P2P 02 The port is configured to use + the peer delay mechanism. + + DISABLED FE The port does not implement + the delay mechanism." + + REFERENCE "Sections 8.2.5.4.4, 6.6.4 and 7.4.2 of [1]." + SYNTAX INTEGER { + e2e(1) + -- p2p(2), + -- disabled(254) + } + + ClockTimeInterval ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This textual convention corresponds to the TimeInterval + structure indicated in section 5.3.2 of [1]. It will be + presented in the form of a character array. + + The TimeInterval type represents time intervals. + + struct TimeInterval + { + Integer64 scaledNanoseconds; + }; + + The scaledNanoseconds member is the time interval expressed in + units of nanoseconds and multiplied by 2**16. + + Positive or negative time intervals outside the maximum range + of this data type shall be encoded as the largest positive and + negative values of the data type, respectively. + + For example, 2.5 ns is expressed as 0000 0000 0002 8000 in + Base16." + + REFERENCE + "Section 5.3.2 and setion 7.7.2.1 Timer interval + specification of [1]" + SYNTAX OCTET STRING (SIZE (1..255)) + + ClockType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The clock types as defined in the MIB module description." + + REFERENCE "section 6.5.1 of [1]." + SYNTAX INTEGER { + --ordinaryClock(1), + boundaryClock(2) + --transparentClock(3), + --boundaryNode(4) + } + + PtpClockToDFormatType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is the format used for ToD signal in input or in output direcdtion. + + ----------------------------------------------------------- + Format Value Description + ----------------------------------------------------------- + telecomTimeEvent 1 + telecomTimeAnnounce 2 + telecomGNSSstatus 3 + NMEAzda 4 ASCII format (eg: $GPZDA,003157.00,01,01,1970,00,00*69) + ISO8601 5 ASCII format (eg: 1970-01-01T00:32:47Z) + NTP 6 ASCII format (eg: 70 001 00:30:51.000 S) + Ublox 7 Not ASCII + ChinaMobile 8 Not ASCII + ChinaTelecom 9 Not ASCII (standard ITU G.8271 is derived from this) + BCM 10 Not ASCII + BCMTS 11 Not ASCII + -----------------------------------------------------------" + SYNTAX INTEGER { + telecomTimeEvent(1), + telecomTimeAnnounce(2), + telecomGNSSstatus(3), + nmeazda(4), + iso8601(5), + ntp(6), + ublox(7), + chinaMobile(8), + chinaTelecom(9), + bcm(10), + bcmts(11) + } + +-------------------------------------------------------------------------------- +-- PTP GROUP +-------------------------------------------------------------------------------- +-- +-- This group is used for Precision Time Protocol version 2 configuration and alarm reporting +-- +-- For details see: +-- [1] IEEE Std 1588(TM)-2008, Standard for a Precision Clock +-- Synchronization Protocol for Networked Measurement and +-- Control Systems, 2008. +-- [2] Recommendation ITU-T G.8275.1/Y1369.1, Precision time protocol +-- telecom profile for phase/time synchronization with full timing +-- support from the network, draft 4 Apr 2014 . +-- +-------------------------------------------------------------------------------- + +------ Beginning -------------------------------------------------------------- + + ptpMibVersion OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Numerical version of this module. + The string version of this MIB have the following format: + XX.YY.ZZ + so, for example, the value 1 should be interpreted as 00.00.01 + and the value 10001 should be interpreted as 01.00.01." + DEFVAL {1} + ::= { ptp 1 } + + + ptpProfileDataSet OBJECT IDENTIFIER ::= { ptp 2 } + ptpSpecificDataSet OBJECT IDENTIFIER ::= { ptp 3 } + ptpDefaultDataSet OBJECT IDENTIFIER ::= { ptp 4 } + ptpCurrentDataSet OBJECT IDENTIFIER ::= { ptp 5 } + ptpParentDataSet OBJECT IDENTIFIER ::= { ptp 6 } + ptpTimePropertiesDataSet OBJECT IDENTIFIER ::= { ptp 7 } + ptpPortDataSet OBJECT IDENTIFIER ::= { ptp 8 } + ptpClockPPSDataSet OBJECT IDENTIFIER ::= { ptp 9 } + ptpRadioAsymmetryDataSet OBJECT IDENTIFIER ::= { ptp 10 } + +------- Begin of Ptp Profile data set. +-- + + ptpSystemProfile OBJECT-TYPE + SYNTAX ClockProfileType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the PTP Profile implemented on the + system." + REFERENCE "Section 19.3 PTP profiles of [1]" + ::= { ptpProfileDataSet 1 } + + ptpProfileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes the PTP Profile implemented on the system." + REFERENCE "Section 19.3 PTP profiles of [1]" +-- DEFVAL { "ITU-T PTP profile for phase/time distribution with full timing support from the network" } + ::= { ptpProfileDataSet 2 } + + ptpProfilePrimaryVersion OBJECT-TYPE + SYNTAX Integer32(0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the profile consist of two fields: a primaryVersion + and a revisionNumber. The profileVersion shall be printed as + primaryVersion.revisionNumber + " + REFERENCE "Section 19.3 PTP profiles of [1]" + DEFVAL { 1 } + ::= { ptpProfileDataSet 3 } + + ptpProfileRevisionNumber OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the profile consist of two fields: a primaryVersion + and a revisionNumber. The profileVersion shall be printed as + primaryVersion.revisionNumber + " + REFERENCE "Section 19.3 PTP profiles of [1]" + DEFVAL { 0 } + ::= { ptpProfileDataSet 4 } + + ptpProfileIdentifier OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(6)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object show the PTP Profile version on the system." + REFERENCE "Section 19.3 PTP profiles of [1]" + DEFVAL {'0019A7010100'h} + ::= { ptpProfileDataSet 5 } + +-- +------- End of Ptp Profile data set. + + + + +------- Begin of Ptp Default data set. +-- Characterizes the PTP clock of the system. +-- + + ptpClockDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpClockDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of information about the PTP clock Default Datasets for + all domains." + ::= { ptpDefaultDataSet 1 } + + ptpClockDataSetEntry OBJECT-TYPE + SYNTAX PtpClockDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains the information of the clock on a particular doamin. This + table will be initialised with default values if the clock is + operating as a boundary or ordinary clock in the domain." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex } + ::= { ptpClockDataSetTable 1 } + + PtpClockDataSetEntry ::= SEQUENCE { + ptpClockDomainIndex ClockDomainType, + ptpClockTypeIndex ClockType, + ptpClockInstanceIndex ClockInstanceType, + ptpClockIdentity OCTET STRING, + ptpClockTwoStepFlag TruthValue, + ptpClockNumberPorts Integer32, + ptpClockClass ClockQualityClassType, + ptpClockAccuracy ClockQualityAccuracyType, + ptpClockOffsetScaledLogVariance Integer32, + ptpClockPriority1 Integer32, + ptpClockPriority2 Integer32, + ptpClockSlaveOnly TruthValue, + ptpClockLocalPriority INTEGER, + ptpClockRowStatus RowStatus + } + + ptpClockDomainIndex OBJECT-TYPE + SYNTAX ClockDomainType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the domain number used to create logical + group of PTP devices. The Clock Domain is a logical group of + clocks and devices that synchronize with each other using the + PTP protocol." + ::= { ptpClockDataSetEntry 1 } + + ptpClockTypeIndex OBJECT-TYPE + SYNTAX ClockType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the clock type as defined in the + Textual convention description." + ::= { ptpClockDataSetEntry 2 } + + ptpClockInstanceIndex OBJECT-TYPE + SYNTAX ClockInstanceType (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the instance of the Clock for this clock + type for the given domain." + ::= { ptpClockDataSetEntry 3 } + + ptpClockIdentity OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the unique identity of the local clock or management node. + This should be the smptpDomainClockIdentity of the domain indicated + by the ptpDomainNumber. Configuration of this value will take effect + only when the PTP module is enabled." + ::= {ptpClockDataSetEntry 4 } + + ptpClockTwoStepFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value is TRUE if the clock is two step clock, otherwise it is + FALSE. If this value is configured as TRUE, then PTP will transmit the + originTimeStamp only through follow-up messages." + DEFVAL { false } + ::= { ptpClockDataSetEntry 5 } + + ptpClockNumberPorts OBJECT-TYPE + SYNTAX Integer32 (1..128) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates the number of PTP ports on the device. For an ordinary + clock this value should be 1." + DEFVAL { 6 } + ::= { ptpClockDataSetEntry 6 } + + ptpClockClass OBJECT-TYPE + SYNTAX ClockQualityClassType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the default dataset Quality Class." + DEFVAL { 248 } + ::= { ptpClockDataSetEntry 7 } + + ptpClockAccuracy OBJECT-TYPE + SYNTAX ClockQualityAccuracyType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the default dataset Quality Accurarcy." + DEFVAL { unknown } + ::= { ptpClockDataSetEntry 8 } + + ptpClockOffsetScaledLogVariance OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value is an estimate of the variations of the local clock + from a linear timescale when it is not synchronized to another + clock using the protocol. The initialization value depends on the + inherent characteristics of the clock during initialization. This + value is used by the BMC algorithm to select the best master clock" + DEFVAL { 0 } + ::= { ptpClockDataSetEntry 9 } + + ptpClockPriority1 OBJECT-TYPE + SYNTAX Integer32 (128) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This value is used by BMC algorithm to select the best master + clock. Lower values take precedence." + DEFVAL { 128 } + ::= { ptpClockDataSetEntry 10 } + + ptpClockPriority2 OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This value is used by BMC algorithm to select the best master clock. + This is used as a tiebreaker when the BMC failes to order the clock + using ptpClockPriority1, ptpClockClass, ptpClockAccuracy and + ptpClockOffsetScaledLogVariance. + Lower values take precedence" + DEFVAL { 128 } + ::= { ptpClockDataSetEntry 11 } + + ptpClockSlaveOnly OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Configuring this value as true will make the clock to behave as slave + clock. + A boundary clock can not be a slave only clock." + DEFVAL { false } + ::= { ptpClockDataSetEntry 12 } + + ptpClockLocalPriority OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This attribute is used in the alternate BMCA as a tie-breaker in the + dataset comparison algorithm, in the event that all other previous + attributes of the datasets being compared are equal." + REFERENCE "Section 6.3.1 and 6.3.2 of [2]" + DEFVAL { 128 } + ::= { ptpClockDataSetEntry 13 } + + ptpClockRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "RowStatus for creating the entries into this table. + This object support only destroy and createAndGo values." + ::= { ptpClockDataSetEntry 14 } + + +-- +------- End of Ptp Default data set. + + +------- Begin of Ptp Specific data set +-- Contains global configuration/information +-- of a particular PTP clock. +-- + + ptpSpecificDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpSpecificDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of vendor specific information about the PTP clock + for all domains." + ::= { ptpSpecificDataSet 1 } + + ptpSpecificDataSetEntry OBJECT-TYPE + SYNTAX PtpSpecificDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains vendor specific information for a particular PTP clock. + Where not otherwise specified, every object of this entry can + be modified with the conceptual row active." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex + } + ::= { ptpSpecificDataSetTable 1 } + + PtpSpecificDataSetEntry ::= SEQUENCE { + ptpAdminStatus INTEGER, + ptpStaticPortRole TruthValue, + ptpClockState ClockStateType, + ptpCompliance INTEGER + } + + ptpAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + down (1), + up (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object states if PTP is enabled or disabled for this PTP Clock + in order to switch on/off the PTP protocol." + DEFVAL { down } + ::= { ptpSpecificDataSetEntry 1 } + + ptpStaticPortRole OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object states that in the PTP Clock the A-BMCA is disabled and + it is working in Static PTP Port Role mode." + DEFVAL { false } + ::= { ptpSpecificDataSetEntry 2 } + + ptpClockState OBJECT-TYPE + SYNTAX ClockStateType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object shows the current state of the PTP Clock State Machine" + ::= { ptpSpecificDataSetEntry 3 } + + ptpCompliance OBJECT-TYPE + SYNTAX INTEGER { + strictCompatibility (1), + looseCompatibility (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object states if the clock is strictly profile compliant. The + meaning of looseCompatibility is application dependent." + DEFVAL { looseCompatibility } + ::= { ptpSpecificDataSetEntry 4 } + + -- + -- Ptp Specific alarms. Contains alarms of a particular PTP clock + -- . + + ptpSpecificAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpSpecificAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of vendor specific information about the PTP clock + for all domains." + ::= { ptpSpecificDataSet 2 } + + ptpSpecificAlarmEntry OBJECT-TYPE + SYNTAX PtpSpecificAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains vendor specific alarm information for a particular PTP clock." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex + } + ::= { ptpSpecificAlarmTable 1 } + + PtpSpecificAlarmEntry ::= SEQUENCE { + ptpFreeRunningAlarm AlarmStatus, + ptpHoldoverInSpecAlarm AlarmStatus, + ptpHoldoverOutOfSpecAlarm AlarmStatus + } + + ptpFreeRunningAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpClockState is set to freerun(1). + " + ::= { ptpSpecificAlarmEntry 1 } + + ptpHoldoverInSpecAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpClockState is set to + holdoverInSpec(4). + " + ::= { ptpSpecificAlarmEntry 2 } + + ptpHoldoverOutOfSpecAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpClockState is set to + holdoverOutOfSpec(5). + " + ::= { ptpSpecificAlarmEntry 3 } + + -- + -- Ptp specific alarm severities. + -- + + ptpFreeRunningAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the severity associated to + ptpFreeRunningAlarm and enables or disables the + sending of the SNMP Trap on the alarm status transition. + " + DEFVAL { warningTrapEnable } + ::= { ptpSpecificDataSet 3 } + + ptpHoldoverInSpecAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the severity associated to + ptpHoldoverInSpecAlarm and enables or disables the + sending of the SNMP Trap on the alarm status transition. + " + DEFVAL { warningTrapEnable } + ::= { ptpSpecificDataSet 4 } + + ptpHoldoverOutOfSpecAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the severity associated to + ptpHoldoverOutOfSpecAlarm and enables or disables the + sending of the SNMP Trap on the alarm status transition. + " + DEFVAL { majorTrapEnable } + ::= { ptpSpecificDataSet 5 } + +-- +------- End of Ptp Specific data set. + + +------- Begin of Ptp Current data set. +-- Synchronization information of the PTP clock. +-- + + ptpCurrentDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpCurrentDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of information about the PTP clock Current Datasets for + all domains." + ::= { ptpCurrentDataSet 1 } + + ptpCurrentDataSetEntry OBJECT-TYPE + SYNTAX PtpCurrentDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Contains synchronization information on a particular domain." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex } + ::= { ptpCurrentDataSetTable 1 } + + PtpCurrentDataSetEntry ::= SEQUENCE { + ptpCurrentStepsRemoved Integer32, + ptpCurrentOffsetFromMaster ClockTimeInterval, + ptpCurrentMeanPathDelay ClockTimeInterval + } + + ptpCurrentStepsRemoved OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the distance measured by the number of + Boundary clocks between the local clock and the Foreign master + as indicated in the stepsRemoved field of Announce messages. + Slave clock will update this field once port is selected as slave." + REFERENCE "1588 Version 2.0 Section 8.2.2.2 stepsRemoved" + ::= { ptpCurrentDataSetEntry 1 } + + ptpCurrentOffsetFromMaster OBJECT-TYPE + SYNTAX ClockTimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the current clock dataset ClockOffset + value. The value of the computation of the offset in time + between a slave and a master clock." + REFERENCE "1588 Version 2.0 Section 8.2.2.3 of [1]" + ::= { ptpCurrentDataSetEntry 2 } + + ptpCurrentMeanPathDelay OBJECT-TYPE + SYNTAX ClockTimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the current clock dataset + MeanPathDelay value. + The mean path delay between a pair of ports as measure by the + delay request-response mechanism." + REFERENCE "1588 Version 2.0 Section 8.2.2.4 mean path delay" + ::= { ptpCurrentDataSetEntry 3 } + +-- +------- End of Ptp Current data set. + + + +------- Begin of Ptp Parent data set. +-- Information about parent PTP clock. +-- + + ptpParentDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpParentDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of information about the PTP clock Parent Datasets for + all domains." + ::= { ptpParentDataSet 1 } + + ptpParentDataSetEntry OBJECT-TYPE + SYNTAX PtpParentDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains parent clock information on a particular domain. " + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex } + ::= { ptpParentDataSetTable 1 } + + PtpParentDataSetEntry ::= SEQUENCE { + ptpParentClockIdentity OCTET STRING, + ptpParentPortNumber ClockPortNumber, + ptpParentGMClockIdentity OCTET STRING, + ptpParentGMClockClass ClockQualityClassType, + ptpParentGMClockAccuracy ClockQualityAccuracyType, + ptpParentGMClockOffsetScaledLogVariance Integer32, + ptpParentGMPriority1 Integer32, + ptpParentGMPriority2 Integer32 + } + + ptpParentClockIdentity OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the clock identity of the port on the master that issues + sync messages used in synchronizing this clock. The initial value + of this field is the value of ptpClockIdentity" + REFERENCE "section 8.2.3.2 parentDS.parentPortIdentity of [1]" + ::= { ptpParentDataSetEntry 1 } + + ptpParentPortNumber OBJECT-TYPE + SYNTAX ClockPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the port number identity of the port on the master that issues + sync message used in synchronizing this clock. Combination of + ptpParentClockIdentity and ptpParentPortNumber gives the port identity + of the parent clock." + REFERENCE "section 8.2.3.2 parentDS.parentPortIdentity of [1]" + ::= { ptpParentDataSetEntry 2 } + + ptpParentGMClockIdentity OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the clock identity attribute of the grand master clock. + The initial value is ptpClockIdentity." + REFERENCE "section 8.2.3.6 parentDS.grandmasterIdentity of [1]" + ::= { ptpParentDataSetEntry 3 } + + ptpParentGMClockClass OBJECT-TYPE + SYNTAX ClockQualityClassType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the clock class of the grandmaster. The + initialization value of this variable is ptpClockClass." + REFERENCE "section 8.2.3.7 parentDS.grandmasterClockQuality of [1]" + ::= { ptpParentDataSetEntry 4 } + + ptpParentGMClockAccuracy OBJECT-TYPE + SYNTAX ClockQualityAccuracyType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the clock accuracy of the grandmaster. The + initialization value of this variable is ptpClockAccuracy" + REFERENCE "section 8.2.3.7 parentDS.grandmasterClockQuality of [1]" + ::= { ptpParentDataSetEntry 5 } + + ptpParentGMClockOffsetScaledLogVariance OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the offset scaled log variance of the grandmaster. The + initialization value of this variable is + ptpClockOffsetScaledLogVariance" + REFERENCE "section 8.2.3.7 parentDS.grandmasterClockQuality of [1]" + ::= { ptpParentDataSetEntry 6 } + + ptpParentGMPriority1 OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the priority1 of the grandmaster clock. The + initialization value of this variable is ptpClockPriority1" + REFERENCE "section 8.2.3.8 parentDS.grandmasterPriority1 of [1]" + ::= { ptpParentDataSetEntry 7 } + + ptpParentGMPriority2 OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the priority2 of the grandmaster clock. The + initialization value of this variable is ptpClockPriority2" + REFERENCE "section 8.2.3.9 parentDS.grandmasterPriority2 of [1]" + ::= { ptpParentDataSetEntry 8 } + +-- +------- End of Ptp Parent data set. + + + +------- Begin of Ptp Time properties data set. +-- Global time properties of the clock. +-- + + ptpTimeDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpTimeDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of information about the PTP clock Timeproperties + Datasets for all domains." + ::= { ptpTimePropertiesDataSet 1 } + + ptpTimeDataSetEntry OBJECT-TYPE + SYNTAX PtpTimeDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains parent Time properties information of the + clock on a particular domain." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex } + ::= { ptpTimeDataSetTable 1 } + + PtpTimeDataSetEntry ::= SEQUENCE { + ptpTimeCurrentUTCOffset Integer32, + ptpTimeCurrentUTCOffsetValid TruthValue, + ptpTimeLeap59 TruthValue, + ptpTimeLeap61 TruthValue, + ptpTimeTimeTraceable TruthValue, + ptpTimeFrequencyTraceable TruthValue, + ptpTimescale TruthValue, + ptpTimeTimeSource ClockTimeSourceType + } + + ptpTimeCurrentUTCOffset OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If systems epoch is the PTP epoch then this value indicates the offset + in seconds between TAI and UTC." + REFERENCE "section 8.2.4.2 timePropertiesDS.currentUtcOffset of [1]" + ::= { ptpTimeDataSetEntry 1 } + + ptpTimeCurrentUTCOffsetValid OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Value of this variable is TRUE if the ptpTimeCurrentUTCOffset is + known to be correct." + REFERENCE "section 8.2.4.3 timePropertiesDS.currentUtcOffsetValid of [1]" + ::= { ptpTimeDataSetEntry 2 } + + ptpTimeLeap59 OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the systems epoch is PTP epoch then TRUE value of this variable + indicates that the last minute of the current UTC day contains 59 + seconds." + REFERENCE "section 8.2.4.4 timePropertiesDS.leap59 of [1]" + ::= { ptpTimeDataSetEntry 3 } + + ptpTimeLeap61 OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the systems epoch is PTP epoch then TRUE value of this variable + indicates that the last minute of the current UTC day contains 61 + seconds." + REFERENCE "section 8.2.4.5 timePropertiesDS.leap61 of [1]" + ::= { ptpTimeDataSetEntry 4 } + + ptpTimeTimeTraceable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable is TRUE if the timescale and value of + ptpTimeCurrentUTCOffset are traceable to a primary reference + otherwise, the value shall be FALSE." + REFERENCE "section 8.2.4.6 timePropertiesDS.timeTraceable of [1]" + ::= { ptpTimeDataSetEntry 5 } + + ptpTimeFrequencyTraceable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable is TRUE if the frequecy determining the timescale is + traceable to a primary reference otherwise, the value shall be FALSE." + REFERENCE "section 8.2.4.7 timePropertiesDS.frequencyTraceable of [1]" + ::= { ptpTimeDataSetEntry 6 } + + ptpTimescale OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable is TRUE if the clock timescale of the grandmaster clock + is PTP otherwise, the value shall be FALSE." + REFERENCE "section 8.2.4.8 timePropertiesDS.ptpTimescale of [1]" + ::= { ptpTimeDataSetEntry 7 } + + ptpTimeTimeSource OBJECT-TYPE + SYNTAX ClockTimeSourceType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the source of time used by the grandmaster clock. If the time + source is known at the time of initialization then the value will be set + to that otherwise the initial value is INTERNAL_OSCILLATOR(160)." + REFERENCE "section 8.2.4.9 timePropertiesDS.timeSource of [1]" + DEFVAL { internalOscillator } + ::= { ptpTimeDataSetEntry 8 } + +-- +------- End of Ptp Time properties data set. + +------- Begin of Ptp PPS and ToD properties data set. +-- + + ptpClockPPSDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpClockPPSDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of information about the PTP clock PPS and ToD properties." + ::= { ptpClockPPSDataSet 1 } + + ptpClockPPSDataSetEntry OBJECT-TYPE + SYNTAX PtpClockPPSDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains PPS and ToD properties information of the + specific domain and clock on a specific PPS socket." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex, + ptpClockPPSInstanceIndex } + ::= { ptpClockPPSDataSetTable 1 } + + PtpClockPPSDataSetEntry ::= SEQUENCE { + ptpClockPPSInstanceIndex ClockPPSInstanceType, + ptpClockPPSInstanceCapability Unsigned32, + ptpClockPPSDirection INTEGER, + + ptpClockPPSLabel DisplayString, + ptpClockPPSAdminStatus INTEGER, + ptpClockPPSOffsetEnabled TruthValue, + ptpClockPPSOffsetValue Integer32, + + ptpClockToDLabel DisplayString, + ptpClockToDAdminStatus INTEGER, + ptpClockToDDelay Unsigned32, + ptpClockToDBaudrate Unsigned32, + ptpClockToDFormat PtpClockToDFormatType + } + + + ptpClockPPSInstanceIndex OBJECT-TYPE + SYNTAX ClockPPSInstanceType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the id of PPS interface socket. + It represents the id of ToD interface socket too." + DEFVAL { 0 } + ::= { ptpClockPPSDataSetEntry 1 } + + + ptpClockPPSInstanceCapability OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is a bitmap and each bit represents + a specific capability of the PPS or ToD interface. + Bit 0 : 1 = the interface can be used either in input or in output + and the user can select the direction using ptpClockPPSDirection object; + 0 = the interface can have one direction specified by the system, + in this case the ptpClockPPSDirection object is read only. + Bit 1 : 1 = the ToD interface allows more baudrate; + 0 = the ToD interface allows one only baudrate, fixed by system. " + DEFVAL { 0 } + ::= { ptpClockPPSDataSetEntry 2 } + + + ptpClockPPSDirection OBJECT-TYPE + SYNTAX INTEGER { + input (1), + output (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the direction (input or output) + of PPS signal and ToD data" + DEFVAL { 2 } + ::= { ptpClockPPSDataSetEntry 3 } + + + ptpClockPPSLabel OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the label as appears near the PPS signal socket" + DEFVAL { "PPS" } + ::= { ptpClockPPSDataSetEntry 4 } + + + ptpClockPPSAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + down (1), + up (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is the administrive status of PPS interface and + specifies whether the node is enabled for PTP input/output + clocking using the PPS interface." + DEFVAL { down } + ::= { ptpClockPPSDataSetEntry 5 } + + + ptpClockPPSOffsetEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether an offset is configured + in order to compensate for a known phase error + such as network asymmetry." + ::= { ptpClockPPSDataSetEntry 6 } + + + ptpClockPPSOffsetValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the fixed offset signed value in nanoseconds + configured to be added for the PPS output or input." + ::= { ptpClockPPSDataSetEntry 7 } + + + ptpClockToDLabel OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the label as appears near the ToD socket" + DEFVAL { "ToD" } + ::= { ptpClockPPSDataSetEntry 8 } + + + ptpClockToDAdminStatus OBJECT-TYPE + SYNTAX INTEGER{ + down (1), + up (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is the administrive status of PPS interface and + specifies whether the ToD interface is enabled." + DEFVAL { down } + ::= { ptpClockPPSDataSetEntry 9 } + + + ptpClockToDDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..999999) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies microseconds of delay between PPS edge + and ToD data emitted, used only in output direction." + DEFVAL { 0 } + ::= { ptpClockPPSDataSetEntry 10 } + + + ptpClockToDBaudrate OBJECT-TYPE + SYNTAX Unsigned32 (300|600|1200|1800|2400|4800|9600|19200|38400|57600|115200|230400) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the Baudrate of ToD signal in input or output direction." + DEFVAL { 9600 } + ::= { ptpClockPPSDataSetEntry 11 } + + + ptpClockToDFormat OBJECT-TYPE + SYNTAX PtpClockToDFormatType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the format of ToD signal in input or output direction." + DEFVAL { telecomTimeEvent } + ::= { ptpClockPPSDataSetEntry 12 } + +-- +------- End of Ptp PPS and ToD properties data set. + + +------- Begin of Ptp Port data set. +-- Configuration information of a particular PTP port. +-- + + ptpPortDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpPortDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table Contains PTP configuration information + for a particular port of boundary or an ordinary clock" + ::= { ptpPortDataSet 1 } + + ptpPortDataSetEntry OBJECT-TYPE + SYNTAX PtpPortDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains PTP configuration information for a particular port. + Valid ptpPortIfIndex need to be given to make this entry active. + Where not otherwise specified, every object of this entry + can be modified with the conceptual row active." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex, + ptpPortIndex + } + ::= { ptpPortDataSetTable 1 } + + PtpPortDataSetEntry ::= SEQUENCE { + ptpPortIndex ClockPortNumber, + ptpPortClockIdentity OCTET STRING, + ptpPortIfIndex InterfaceIndex, + ptpPortStaticRole INTEGER, + ptpPortAdminStatus INTEGER, + ptpPortState ClockPortState, + ptpPortMinDelayReqInterval Integer32, + ptpPortLogAnnounceInterval Integer32, + ptpPortAnnounceReceiptTimeout Integer32, + ptpPortSyncInterval Integer32, + ptpPortDelayMechanism ClockMechanismType, + ptpPortVersionNumber Integer32, + ptpPortNotSlave TruthValue, + ptpPortLocalPriority Integer32, + ptpPortDestMacAddress INTEGER, + ptpPortTxAsymmetryCompensation Integer32, + ptpPortRxAsymmetryCompensation Integer32, + ptpPortRowStatus RowStatus + } + + ptpPortIndex OBJECT-TYPE + SYNTAX ClockPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index value used to identify the port component on the device. + The value of this object is used as a port index to the + ptpPortConfigDataSetTable." + ::= { ptpPortDataSetEntry 1 } + + ptpPortClockIdentity OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the clock Identity of the port" + REFERENCE "section 8.2.5.2.1 portDS.portIdentity of [1]" + ::= { ptpPortDataSetEntry 2 } + + ptpPortIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the index in ifTable of this port. + This object can't be modified." + ::= { ptpPortDataSetEntry 3 } + + ptpPortStaticRole OBJECT-TYPE + SYNTAX INTEGER { + master (6), + passive (7), + slave (9) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Role of this port. This object forces the role of the port if + ptpStaticPortRole is true." + DEFVAL { master } + ::= { ptpPortDataSetEntry 4} + + ptpPortAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + down (1), + up (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Administrive status of the port. The value down turns off the PTP + protocol on the ethernet port." + DEFVAL { down } + ::= { ptpPortDataSetEntry 5 } + + ptpPortState OBJECT-TYPE + SYNTAX ClockPortState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This denotes the PTP State of the PTP port as computed by the PTP State + event machine. + + initializing: + While a port is in the INITIALIZING state, the port initializes its data + sets, hardware, and communication facilities. No port of the clock shall + place any PTP messages on its communication path. If one port of a + boundary clock is in the INITIALIZING state, then all ports shall be in + the INITIALIZING state. + + faulty: + The fault state of the protocol. A port in this state shall not place any + PTP messages except for management messages that are a required response + to another management message on its communication path. + + disabled: + The port shall not place any messages on its communication path. In a + boundary clock, no activity at the port shall be allowed to affect the + activity at any other port of the boundary clock. A port in this state + shall discard all PTP received messages except for management messages. + + listening: + The port is waiting for the announceReceiptTimeout to expire or to + receive an Announce message from a master. The purpose of this state is + to allow orderly addition of clocks to a domain. A port in this state + shall not place any PTP messages on its communication path except for + Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, + or management messages that are a required response to another + management message. + + premaster: + The port shall behave in all respects as though it were in the MASTER + state except that it shall not place any messages on its communication + path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling + or management messages. + + master: + The port is behaving as a master port. It will periodically send announce + and sync messages. + + passive: + The port shall not place any messages on its communication path except + for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages + or management messages that are a required response to another management + message. + + uncalibrated: + This is a transient state to allow initialization of synchronization + servos, updating of data sets when a new master port has been selected, + and other implementation-specific activity. + + slave: + The port is synchronizing to the selected master port." + REFERENCE "section 8.2.5.3.1 portDS.portState of [1]" + ::= { ptpPortDataSetEntry 6 } + + ptpPortMinDelayReqInterval OBJECT-TYPE + SYNTAX Integer32 (-7..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the log to the base 2 of the delay request interval + in seconds. This speifies the time to the members devices to + send delay request messages when the port is in the master. + It specify the minimum permitted mean time interval between + successive Delay_Req messages, min delay request interval value is + a compromise between the fluctuation in link delay and startup time + and the communication and computation load imposed by transmission + of these messages." + REFERENCE "section 8.2.5.3.2 portDS.logMinDelayReqInterval of [1]" + DEFVAL { -4 } + ::= { ptpPortDataSetEntry 7 } + + ptpPortLogAnnounceInterval OBJECT-TYPE + SYNTAX Integer32 (-3..6) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the log to the base 2 of the mean Announce message interval + in seconds." + REFERENCE "section 8.2.5.4.1 portDS.logAnnounceInterval of [1]" + DEFVAL { -3 } + ::= { ptpPortDataSetEntry 8 } + + ptpPortAnnounceReceiptTimeout OBJECT-TYPE + SYNTAX Integer32 (3..10) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the Announce receipt time out value. + This should be an integral multiple of announce interval + in seconds" + REFERENCE "section 8.2.5.4.2 portDS.announceReceiptTimeout of [1]" + DEFVAL { 3 } + ::= { ptpPortDataSetEntry 9 } + + ptpPortSyncInterval OBJECT-TYPE + SYNTAX Integer32 (-7..0) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the logarithm to the base 2 of the sync message interval + in seconds" + REFERENCE "section 8.2.5.4.3 portDS.logSyncInterval of [1]" + DEFVAL { -4 } + ::= { ptpPortDataSetEntry 10 } + + ptpPortDelayMechanism OBJECT-TYPE + SYNTAX ClockMechanismType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates the propagation delay measuring option used by the + port in computing meanpathDelay." + DEFVAL { e2e } + ::= { ptpPortDataSetEntry 11 } + + ptpPortVersionNumber OBJECT-TYPE + SYNTAX Integer32 (2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates the PTP version in use on the port." + DEFVAL { 2 } + ::= { ptpPortDataSetEntry 12 } + + ptpPortNotSlave OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This attribute is used in the alternate BMCA to prevent that a port + can be placed in the SLAVE state." + REFERENCE "Section 6.3.1 and 6.3.2 of [2]" + DEFVAL { true } + ::= { ptpPortDataSetEntry 13 } + + ptpPortLocalPriority OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This attribute is used in the alternate BMCA as a tie-breaker in the + dataset comparison algorithm, in the event that all other previous + attributes of the datasets being compared are equal." + REFERENCE "Section 6.3.1 and 6.3.2 of [2]" + DEFVAL { 128 } + ::= { ptpPortDataSetEntry 14 } + + ptpPortDestMacAddress OBJECT-TYPE + SYNTAX INTEGER { + forwardable (1), + nonForwardable (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This attribute is used in to select the destination MAC address + inserted in the outgoing packets: + forwardable: 01-1B-19-00-00-00 + nonForwardable: 01-80-C2-00-00-0E + " + REFERENCE "Section 6.2.6 of [3]" + DEFVAL { nonForwardable } + ::= { ptpPortDataSetEntry 15 } + + ptpPortTxAsymmetryCompensation OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This attribute is used to compensate in nanoseconds the asymmetric + delay. It works in TX direction." + DEFVAL { 0 } + ::= { ptpPortDataSetEntry 16 } + + ptpPortRxAsymmetryCompensation OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This attribute is used to compensate in nanoseconds the asymmetric + delay. It works in RX direction." + DEFVAL { 0 } + ::= { ptpPortDataSetEntry 17 } + + ptpPortRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "RowStatus for creating the entries into this table. + This object can't be modified." + ::= { ptpPortDataSetEntry 18 } + + -- + -- Ptp Port alarms. Contains alarms of a particular PTP port + -- + + ptpPortAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpPortAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table Contains PTP alarm information + for a particular port of boundary or an ordinary clock." + ::= { ptpPortDataSet 2 } + + ptpPortAlarmEntry OBJECT-TYPE + SYNTAX PtpPortAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains PTP alarm information for a particular port." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex, + ptpPortIndex + } + ::= { ptpPortAlarmTable 1 } + + PtpPortAlarmEntry ::= SEQUENCE { + ptpPortFaultyAlarm AlarmStatus, + ptpPortInitializingAlarm AlarmStatus, + ptpPortUncalibratedAlarm AlarmStatus, + ptpPortListeningAlarm AlarmStatus, + ptpPortActiveStatus AlarmStatus + } + + ptpPortFaultyAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpPortState is set to faulty(2)." + ::= { ptpPortAlarmEntry 1 } + + ptpPortInitializingAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpPortState is set to initializing(1). + " + ::= { ptpPortAlarmEntry 2 } + + ptpPortUncalibratedAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpPortState is set to uncalibrated(8). + " + ::= { ptpPortAlarmEntry 3 } + + ptpPortListeningAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpPortState is set to listening(4). + " + ::= { ptpPortAlarmEntry 4 } + + ptpPortActiveStatus OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when ptpPortState is set to slave(9). + " + ::= { ptpPortAlarmEntry 5 } + + -- + -- Ptp Radio Port alarms. Contains alarms of a Radio PTP port + -- + + ptpPortRadioAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpPortRadioAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table Contains PTP alarm information + for a radio port of boundary or an ordinary clock." + ::= { ptpPortDataSet 3 } + + ptpPortRadioAlarmEntry OBJECT-TYPE + SYNTAX PtpPortRadioAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains PTP alarm information for a radio port." + INDEX { ptpClockDomainIndex, + ptpClockTypeIndex, + ptpClockInstanceIndex, + ptpPortIndex + } + ::= { ptpPortRadioAlarmTable 1 } + + PtpPortRadioAlarmEntry ::= SEQUENCE { + ptpPortRadioCapacityAlarm AlarmStatus + } + + ptpPortRadioCapacityAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when the capacity of a radio link + is not big enough to transport PTP packets." + ::= { ptpPortRadioAlarmEntry 1 } + + -- + -- Ptp Port alarm severities. + -- + + ptpPortFaultyAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the severity associated to + ptpPortFaultyAlarm and enables or disables the + sending of the SNMP Trap on the alarm status transition. + " + DEFVAL { majorTrapEnable } + ::= { ptpPortDataSet 4 } + + ptpPortInitializingAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the severity associated to + ptpPortInitializingAlarm and enables or disables the + sending of the SNMP Trap on the alarm status transition. + " + DEFVAL { warningTrapEnable } + ::= { ptpPortDataSet 5 } + + ptpPortUncalibratedAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the severity associated to + ptpPortUncalibratedAlarm and enables or disables the + sending of the SNMP Trap on the alarm status transition. + " + DEFVAL { warningTrapEnable } + ::= { ptpPortDataSet 6 } + + ptpPortListeningAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the severity associated to + ptpPortListeningAlarm and enables or disables the + sending of the SNMP Trap on the alarm status transition. + " + DEFVAL { warningTrapEnable } + ::= { ptpPortDataSet 7 } + + ptpPortActiveStatusSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object enables or disables the sending of the SNMP Trap + on ptpPortActiveStatus transition. + " + DEFVAL { statusTrapEnable } + ::= { ptpPortDataSet 8 } + + ptpPortRadioCapacityAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object enables or disables the sending of the SNMP Trap + on ptpPortRadioCapacityAlarm transition. + " + DEFVAL { majorTrapEnable } + ::= { ptpPortDataSet 9 } + +-- +------- End of Ptp Port data set. + + +------- Begin of PTP Radio Asymmetry data set. +-- Configuration asymmetry of a specific Radio unit. +-- + + ptpRadioAsymmetryDataSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpRadioAsymmetryDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains delay offset for asymmetries compensation for the Radio unit." + ::= { ptpRadioAsymmetryDataSet 1 } + + ptpRadioAsymmetryDataSetEntry OBJECT-TYPE + SYNTAX PtpRadioAsymmetryDataSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each ntry contains delay offset for asymmetries compensation for a specific Radio unit." + INDEX { ptpRadioBrIndex + } + ::= { ptpRadioAsymmetryDataSetTable 1 } + + PtpRadioAsymmetryDataSetEntry ::= SEQUENCE { + ptpRadioBrIndex Integer32, + ptpRadioOffset Integer32 + } + + + ptpRadioBrIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the index in radioTable of this unit. + This object can't be modified." + ::= { ptpRadioAsymmetryDataSetEntry 1 } + + + ptpRadioOffset OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is an offset in nanoseconds for asymmetry compensation and + can have both positive and negative values." + DEFVAL { 0 } + ::= { ptpRadioAsymmetryDataSetEntry 2 } + +-- +------- End of PTP Radio Asymmetry data set. + +END + + |