summaryrefslogtreecommitdiff
path: root/MIBS/smartoptics/DCP-OCH-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/smartoptics/DCP-OCH-MIB')
-rw-r--r--MIBS/smartoptics/DCP-OCH-MIB391
1 files changed, 391 insertions, 0 deletions
diff --git a/MIBS/smartoptics/DCP-OCH-MIB b/MIBS/smartoptics/DCP-OCH-MIB
new file mode 100644
index 0000000..13f1a7a
--- /dev/null
+++ b/MIBS/smartoptics/DCP-OCH-MIB
@@ -0,0 +1,391 @@
+--
+-- DCP-OCH-MIB.mib
+-- Smartoptics DCP Interface Enterprise Specific MIB.
+--
+-- Copyright (c) 2021, Smartoptics
+-- All rights reserved
+--
+
+DCP-OCH-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+ dcpGeneric
+ FROM DCP-MIB
+ OBJECT-GROUP, MODULE-COMPLIANCE
+ FROM SNMPv2-CONF
+ Unsigned32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY
+ FROM SNMPv2-SMI
+ DisplayString
+ FROM SNMPv2-TC
+ OpticalPower1Decimal, ItuPerceivedSeverity, InterfaceStatus, DcpTenths, DcpHundreds, OchPortMode
+ FROM SO-TC-MIB;
+
+-- 1.3.6.1.4.1.30826.2.2.4
+dcpOch MODULE-IDENTITY
+ LAST-UPDATED "202103181449Z"
+ ORGANIZATION "Smartoptics."
+ CONTACT-INFO "http://www.smartoptics.com"
+ DESCRIPTION "This is the enterprise specific DCP OCH MIB for Smartoptics"
+
+ REVISION "202103181449Z"
+ DESCRIPTION "The initial revision"
+::= { dcpGeneric 4 }
+
+
+
+-- Node definitions
+--
+-- 1.3.6.1.4.1.30826.2.2.4.1
+dcpOchGeneral OBJECT IDENTIFIER ::= { dcpOch 1 }
+
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1
+dcpOchGeneralTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OchGeneralEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table with general information about the och port."
+::= { dcpOchGeneral 1 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1
+dcpOchGeneralEntry OBJECT-TYPE
+ SYNTAX OchGeneralEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+INDEX { dcpOchGeneralIndex }
+::= { dcpOchGeneralTable 1 }
+
+
+OchGeneralEntry ::=
+ SEQUENCE {
+ dcpOchGeneralIndex
+ Unsigned32,
+ dcpOchGeneralPortName
+ DisplayString,
+ dcpOchGeneralSpacing
+ DcpHundreds,
+ dcpOchGeneralMaxChannels
+ Unsigned32,
+ dcpOchGeneralActiveChannels
+ Unsigned32,
+ dcpOchGeneralUtilization
+ Gauge32,
+ dcpOchGeneralConfiguredChannels
+ Unsigned32
+ }
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.1
+dcpOchGeneralIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..1000000)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Port Index in the following format:
+ ccspp where
+
+ cc: chassis.
+ s: slot number.
+ pp: port number."
+::= { dcpOchGeneralEntry 1 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.2
+dcpOchGeneralPortName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port name in the following format:
+ och-c/s/port where c = chassis, s = slot, port = port name
+ or
+ ocm-c/s where c = chassis, s = slot"
+::= { dcpOchGeneralEntry 2 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.3
+dcpOchGeneralSpacing OBJECT-TYPE
+ SYNTAX DcpHundreds
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The channel spacing used in units of 0.01 GHz."
+::= { dcpOchGeneralEntry 3 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.4
+dcpOchGeneralMaxChannels OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of channels that is used for the optical power channel plan for the EDFA."
+::= { dcpOchGeneralEntry 4 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.5
+dcpOchGeneralActiveChannels OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of active channels currently in regulation."
+::= { dcpOchGeneralEntry 5 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.6
+dcpOchGeneralUtilization OBJECT-TYPE
+ SYNTAX Gauge32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of channels used in the system in units of %."
+::= { dcpOchGeneralEntry 6 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.7
+dcpOchGeneralConfiguredChannels OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of channels that are enabled."
+::= { dcpOchGeneralEntry 7 }
+
+
+
+-- Node definitions
+--
+-- 1.3.6.1.4.1.30826.2.2.4.2
+dcpOchObjects OBJECT IDENTIFIER ::= { dcpOch 2 }
+
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1
+dcpOchTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OchInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table with all optical channels of the system."
+::= { dcpOchObjects 1 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1
+dcpOchEntry OBJECT-TYPE
+ SYNTAX OchInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+INDEX { dcpOchIndex }
+::= { dcpOchTable 1 }
+
+
+OchInterfaceEntry ::=
+ SEQUENCE {
+ dcpOchIndex
+ Unsigned32,
+ dcpOchChannelId
+ DisplayString,
+ dcpOchRxPower
+ DcpTenths,
+ dcpOchTxPower
+ DcpTenths,
+ dcpOchWssAttenuation
+ DcpTenths,
+ dcpOchWssInsertionLoss
+ DcpTenths,
+ dcpOchWantedOutputPower
+ DcpTenths,
+ dcpOchPortMode
+ OchPortMode,
+ dcpOchStatus
+ InterfaceStatus,
+ dcpOchDescription
+ DisplayString,
+ dcpOchAlarm
+ ItuPerceivedSeverity
+ }
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.1
+dcpOchIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..1000000)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Och Index in the following format:
+ cspoooy where
+
+ c: chassis.
+ s: slot number.
+ p: port number.
+ ooo: Och number.
+ y: 0 = tx+rx port, 1 = tx port, 2 = rx port.
+
+ Same Index is used in the IF-MIB."
+::= { dcpOchEntry 1 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.2
+dcpOchChannelId OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical channel id name in the following format:
+ och-c/s/p/och where
+ c = chassis.
+ s = slot number.
+ port = edfa or eq.
+ och = optical channel."
+::= { dcpOchEntry 2 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.3
+dcpOchRxPower OBJECT-TYPE
+ SYNTAX DcpTenths
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical input power for the optical channel in units of 0.1 dBm."
+::= { dcpOchEntry 3 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.4
+dcpOchTxPower OBJECT-TYPE
+ SYNTAX DcpTenths
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical output power for the optical channel in units of 0.1 dBm."
+::= { dcpOchEntry 4 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.5
+dcpOchWssAttenuation OBJECT-TYPE
+ SYNTAX DcpTenths
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The WSS attenuation for the optical channel in units of 0.1 dB."
+::= { dcpOchEntry 5 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.6
+dcpOchWssInsertionLoss OBJECT-TYPE
+ SYNTAX DcpTenths
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The calibration value of WSS insertion loss in units of 0.1 dBm."
+::= { dcpOchEntry 6 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.7
+dcpOchWantedOutputPower OBJECT-TYPE
+ SYNTAX DcpTenths
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The wanted optical output power for the optical channel in units of 0.1 dBm."
+::= { dcpOchEntry 7 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.8
+dcpOchPortMode OBJECT-TYPE
+ SYNTAX OchPortMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port mode for the channel. Port mode can be on or off.
+ off - The channel is disabled.
+ on - The channel is enabled.
+ edfa - The channel is enabled and connected to the edfa port.
+ express - The channel is enabled and connected to the express port."
+::= { dcpOchEntry 8 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.9
+dcpOchStatus OBJECT-TYPE
+ SYNTAX InterfaceStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational state for a channel.
+
+ idle - The optical channel is not activated.
+
+ down - The optical channel traffic is lost.
+
+ up - There is traffic on the optical channel."
+::= { dcpOchEntry 9 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.10
+dcpOchDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User configurable description string for the optical channel."
+::= { dcpOchEntry 10 }
+
+-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.11
+dcpOchAlarm OBJECT-TYPE
+ SYNTAX ItuPerceivedSeverity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest alarm severity of the optical channel."
+::= { dcpOchEntry 11 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.3
+dcpOchMIBCompliance OBJECT IDENTIFIER ::= { dcpOch 3 }
+
+-- 1.3.6.1.4.1.30826.2.2.4.3.1
+dcpOchMIBGroups OBJECT IDENTIFIER ::= { dcpOchMIBCompliance 1 }
+
+-- 1.3.6.1.4.1.30826.2.2.4.3.1.1
+dcpOchGeneralTableGroupV1 OBJECT-GROUP
+ OBJECTS { dcpOchGeneralPortName, dcpOchGeneralSpacing, dcpOchGeneralMaxChannels, dcpOchGeneralActiveChannels,
+ dcpOchGeneralUtilization, dcpOchGeneralConfiguredChannels}
+ STATUS current
+ DESCRIPTION
+ "The och general table objects V1."
+::= { dcpOchMIBGroups 1 }
+
+-- 1.3.6.1.4.1.30826.2.2.4.3.1.2
+dcpOchTableGroupV1 OBJECT-GROUP
+ OBJECTS { dcpOchChannelId, dcpOchRxPower, dcpOchTxPower, dcpOchWssAttenuation, dcpOchWssInsertionLoss,
+ dcpOchWantedOutputPower, dcpOchPortMode, dcpOchStatus, dcpOchDescription, dcpOchAlarm}
+ STATUS current
+ DESCRIPTION
+ "The och table objects V1."
+::= { dcpOchMIBGroups 2 }
+
+
+-- 1.3.6.1.4.1.30826.2.2.4.3.2
+dcpOchMIBCompliances OBJECT IDENTIFIER ::= { dcpOchMIBCompliance 2 }
+
+-- 1.3.6.1.4.1.30826.2.2.4.3.2.1
+dcpOchBasicComplV1 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Basic implementation requirements for the DCP-OCH-MIB V1."
+ MODULE
+ MANDATORY-GROUPS {
+ dcpOchGeneralTableGroupV1,
+ dcpOchTableGroupV1}
+ ::= { dcpOchMIBCompliances 1 }
+
+
+END
+
+--
+-- DCP-OCH-MIB.mib
+--
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:00:24 +0000