diff options
Diffstat (limited to 'MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB')
| -rw-r--r-- | MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB b/MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB new file mode 100644 index 0000000..5880318 --- /dev/null +++ b/MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB @@ -0,0 +1,297 @@ +-- ********************************************************************* +-- ********************************************************************* +-- ** Filename: PRVT-NETWORK-LOOPBACK-TEST-MIB +-- ** Project: Network Loopback Tester +-- ** Purpose: Private MIB +-- ********************************************************************* +-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications. +-- BATM Advanced Communications retains all title and +-- ownership in the Specification, including any revisions. + +-- BATM Advanced Communications grants all interested parties a non-exclusive +-- license to use and distribute an unmodified copy of this +-- Specification in connection with management of BATM Advanced Communications +-- and Telco Systems products, and without fee, provided that the following +-- conditions are met: +-- 1. Redistributions of this specification must retain the above copyright +-- notice, this list of conditions and the following disclaimer. +-- 2. Redistributions in binary form must reproduce the above copyright +-- notice, this list of conditions and the following disclaimer in the +-- documentation and/or other materials provided with the distribution. +-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse +-- or promote products derived from this specification without specific prior written +-- permission. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE. +PRVT-MONITOR-SESSION-MIB DEFINITIONS ::= BEGIN + +IMPORTS +MODULE-IDENTITY, +OBJECT-TYPE, +Integer32 +FROM SNMPv2-SMI + + + +MODULE-COMPLIANCE, +OBJECT-GROUP +FROM SNMPv2-CONF + + + -- [RFC2578] + +DisplayString, +TEXTUAL-CONVENTION +FROM SNMPv2-TC + +PortList +FROM Q-BRIDGE-MIB + +switch +FROM PRVT-SWITCH-MIB; + +-- The MONITOR SESSION MIB +prvtMonitorSessionMib MODULE-IDENTITY + +LAST-UPDATED "201105230000Z" +ORGANIZATION "BATM Advanced Communication" +CONTACT-INFO +"BATM/Telco Systems Support team +Email: +For North America: techsupport@telco.com +For North Europe: support@batm.de, info@batm.de +For the rest of the world: techsupport@telco.com" + +DESCRIPTION +"This MIB contains manageable objects for +encapsulating Switched Port Analyzer(SPAN) feature." + +REVISION "201105230000Z" +DESCRIPTION +"Initial version." + +::= { switch 1000 } + + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- +Direction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Monitor direction: + tx- Transmit + rx- Receive" + SYNTAX INTEGER + { + rx(1), + tx(2) + } +-- ------------------------------------------------------------- +-- groups in the PRVT-MONITOR-SESSION MIB +-- ------------------------------------------------------------- +prvtMonitorSessionNotification OBJECT IDENTIFIER ::= { prvtMonitorSessionMib 0 } +prvtMonitorSessionObjects OBJECT IDENTIFIER ::= { prvtMonitorSessionMib 1 } +prvtMonitorSessionConformance OBJECT IDENTIFIER ::= { prvtMonitorSessionMib 2 } + +-- ------------------------------------------------------------- +-- prvtMonitorSessionObjects group +-- ------------------------------------------------------------- +prvtMonitorSessionTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtMonitorSessionEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"This table contains object for enable and configure Enable Switched Port Analyzer." +::= { prvtMonitorSessionObjects 1 } + +prvtMonitorSessionEntry OBJECT-TYPE +SYNTAX PrvtMonitorSessionEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in the table will describe all parameteres of Switched Port Analyzer per each direction Rx or Tx " +INDEX { prvtMonitorSessionDirection } +::= {prvtMonitorSessionTable 1} + +PrvtMonitorSessionEntry ::= SEQUENCE{ +prvtMonitorSessionDirection Direction, +prvtMonitorSessionSource PortList, +prvtMonitorSessionDestination Integer32 +} + +prvtMonitorSessionDirection OBJECT-TYPE +SYNTAX Direction +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"Direction recived/trasmitted of the monitored traffic." +::= {prvtMonitorSessionEntry 1} + +prvtMonitorSessionSource OBJECT-TYPE +SYNTAX PortList +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Monitored source list representing the ports to be mirrored." +::= {prvtMonitorSessionEntry 2} + + + +prvtMonitorSessionDestination OBJECT-TYPE +SYNTAX Integer32 +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Analyzer port." +::= {prvtMonitorSessionEntry 3} + +prvtAnalyzerVLANTagTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtAnalyzerVLANTagEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"This table contains object for enable and configure Remote Analyzer VLAN Tag" +::= { prvtMonitorSessionObjects 2 } + +prvtAnalyzerVLANTagEntry OBJECT-TYPE +SYNTAX PrvtAnalyzerVLANTagEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in the table will describe all parameteres of Remote Analyzer VLAN Tag per each direction Rx or Tx " +INDEX { prvtMonitorSessionDirection } +::= {prvtAnalyzerVLANTagTable 1} + +PrvtAnalyzerVLANTagEntry ::= SEQUENCE{ +prvtAnalyzerVLANTagEnable INTEGER, +prvtAnalyzerVLANTagVID Integer32, +prvtAnalyzerVLANTagEtherType DisplayString, +prvtAnalyzerVLANTagCFI INTEGER, +prvtAnalyzerVLANTagVPT INTEGER +} + +prvtAnalyzerVLANTagEnable OBJECT-TYPE +SYNTAX INTEGER +{ +enable(1), +disable(2) +} +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Enable Remote Analyzer VLAN Tag." +::= {prvtAnalyzerVLANTagEntry 1} + +prvtAnalyzerVLANTagVID OBJECT-TYPE +SYNTAX Integer32 (1..4095) +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"The VLAN ID of the VLAN tag added to packet forwarded to Analyzer." +::= {prvtAnalyzerVLANTagEntry 2} + + +prvtAnalyzerVLANTagEtherType OBJECT-TYPE +SYNTAX DisplayString +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"The Vlan ether type of the VLAN tag added to packet forwarded to Analyzer." +::= {prvtAnalyzerVLANTagEntry 3} + + +prvtAnalyzerVLANTagCFI OBJECT-TYPE +SYNTAX INTEGER +{ +clear(0), +set(1) +} +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"The CFI of the VLAN tag added to packet forwarded to Analyzer." +::= {prvtAnalyzerVLANTagEntry 4} + +prvtAnalyzerVLANTagVPT OBJECT-TYPE +SYNTAX INTEGER +{ +vpt-value0(0), +vpt-value1(1), +vpt-value2(2), +vpt-value3(3), +vpt-value4(4), +vpt-value5(5), +vpt-value6(6), +vpt-value7(7), +undefined(8) +} +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"The VPT of the VLAN tag added to packet forwarded to Analyzer." +::= {prvtAnalyzerVLANTagEntry 5} + +-- ---------------------------------------------------------------------------- +-- Notifications +-- ---------------------------------------------------------------------------- + +-- ---------------------------------------------------------------------------- +-- Conformance Information +-- ---------------------------------------------------------------------------- +prvtMonitorSessionCompliances OBJECT IDENTIFIER ::= {prvtMonitorSessionConformance 1} +prvtMonitorSessionGroups OBJECT IDENTIFIER ::= {prvtMonitorSessionConformance 2} + +-- compliance statements +prvtMonitorSessionCompliance MODULE-COMPLIANCE +STATUS current +DESCRIPTION +"The compliance statement for Switched Port Analyzer." +MODULE -- this module +MANDATORY-GROUPS { +prvtMonitorSessionMirroredGroup, +prvtMonitorSessionAnalyzerGroup +} +::= {prvtMonitorSessionCompliances 1} + +prvtMonitorSessionMirroredGroup OBJECT-GROUP +OBJECTS { +prvtMonitorSessionSource +} STATUS current +DESCRIPTION +"The group of objects dedicated to mirrored source." +::= {prvtMonitorSessionGroups 1} + +prvtMonitorSessionAnalyzerGroup OBJECT-GROUP +OBJECTS { +prvtMonitorSessionDestination, +prvtAnalyzerVLANTagEnable +} STATUS current +DESCRIPTION +"The group of objects dedicated to analyzer." +::= {prvtMonitorSessionGroups 2} + +END + + + + + + + + + |