diff options
Diffstat (limited to 'MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB')
| -rw-r--r-- | MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB b/MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB new file mode 100644 index 0000000..7967376 --- /dev/null +++ b/MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB @@ -0,0 +1,396 @@ +-- ********************************************************************* +-- ** +-- ** BATM Advanced Communications. +-- ** +-- ********************************************************************* +-- ** Filename: PRVT-L2TUNNELING-MIB.mib +-- ** Project: T-Metro Switches. +-- ** Purpose: Private MIB +-- ********************************************************************* +-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications and contains +-- proprietary and confidential information. This file is made +-- available to authorized BATM customers on the express +-- condition that neither it, nor any of the information contained +-- therein, shall be disclosed to third parties or be used for any +-- purpose other than to replace, modify or upgrade firmware and/or +-- software components of BATM manufactured equipment within the +-- authorized customer's network, and that such transfer be +-- completed in accordance with the instructions provided by +-- BATM. Any other use is strictly prohibited. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. +-- +-- ---------------------------------------------------------------------------- + +PRVT-L2TUNNELING-MIB DEFINITIONS ::= BEGIN + +IMPORTS + sapEntry, sdpEntry + FROM PRVT-SERV-MIB + serviceAccessSwitch + FROM PRVT-SWITCH-MIB + Counter32, MODULE-IDENTITY, OBJECT-TYPE + FROM SNMPv2-SMI + DisplayString, RowStatus, TEXTUAL-CONVENTION + FROM SNMPv2-TC; + +prvtL2TunnelingMIB MODULE-IDENTITY + LAST-UPDATED "201001290000Z" + ORGANIZATION + "BATM Advanced Communication" + CONTACT-INFO + "BATM/Telco Systems Support team + Email: + For North America: techsupport@telco.com + For North Europe: support@batm.de, info@batm.de + For the rest of the world: techsupport@telco.com" + DESCRIPTION + "This document is the SNMP MIB module to manage the + layer two tunneling feature, designed for service providers." + REVISION "201001290000Z" + DESCRIPTION + "Initial version." + ::= { serviceAccessSwitch 3 } + + +PrvtL2TunnelProfileNameTC ::= TEXTUAL-CONVENTION + DISPLAY-HINT "32a" + STATUS current + DESCRIPTION + "The name of a tunneling profile." + SYNTAX OCTET STRING (SIZE(1..32)) + +PrvtL2TunnelProfileNameOrNoneTC ::= TEXTUAL-CONVENTION + DISPLAY-HINT "32a" + STATUS current + DESCRIPTION + "Same as PrvtL2TunnelProfileNameTC except that a zero + length octet string represents no profile has been assigned." + SYNTAX OCTET STRING (SIZE(0..32)) + +prvtL2TunnelingMIBObjects OBJECT IDENTIFIER + ::= { prvtL2TunnelingMIB 1 } + +prvtL2TunnEnable OBJECT-TYPE + SYNTAX INTEGER { enable(1), disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable L2 Tunneling feature" + ::= { prvtL2TunnelingMIBObjects 1 } + +prvtL2TunnProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtL2TunnProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains all predefined and defined profiles." + ::= { prvtL2TunnelingMIBObjects 2 } + +prvtL2TunnProfileEntry OBJECT-TYPE + SYNTAX PrvtL2TunnProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table contains a TLS tunneling profile" + INDEX { prvtL2TunnProfileName } + ::= { prvtL2TunnProfileTable 1 } + +PrvtL2TunnProfileEntry ::= SEQUENCE { + prvtL2TunnProfileName PrvtL2TunnelProfileNameTC, + prvtL2TunnProfileRowStatus RowStatus +} + +prvtL2TunnProfileName OBJECT-TYPE + SYNTAX PrvtL2TunnelProfileNameTC + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "TLS profile name. + There are three predefined profiles: + - discard-all + - tunnel-bdpu + - tunnel-all" + ::= { prvtL2TunnProfileEntry 1 } + +prvtL2TunnProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "TLS profile rowStatus. It is not possible to + modify the predefined profiles." + ::= { prvtL2TunnProfileEntry 2 } + +prvtL2ProtocolsTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtL2ProtocolsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains all predefined and + custom defined L2 Protocols" + ::= { prvtL2TunnelingMIBObjects 3 } + +prvtL2ProtocolsEntry OBJECT-TYPE + SYNTAX PrvtL2ProtocolsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in prvtL2ProtocolsTable." + INDEX { prvtL2ProtocolName } + ::= { prvtL2ProtocolsTable 1 } + +PrvtL2ProtocolsEntry ::= SEQUENCE { + prvtL2ProtocolName OCTET STRING, + prvtL2ProtocolRowStatus RowStatus, + prvtL2ProtocolEthertype OCTET STRING, + prvtL2ProtocolMAC OCTET STRING, + prvtL2ReplaceMAC OCTET STRING +} + +prvtL2ProtocolName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..16)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "L2 Protocol Name. + The following protocol names are pre-defined: + - stp + - lacp + - efm-oam + - dot1x + - e-lmi + - lldp + - other (All other bridge block of protocols) + - all-brs (All Bridges) + - garp (GARP Block of Protocols) + - pb-stp (Provider Bridge STP) + - pvst (Per-VLAN STP)" + ::= { prvtL2ProtocolsEntry 1 } + +prvtL2ProtocolRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "RowStatus used to create/delete custom protocols. + It is not possible to modify the predefined protocols." + ::= { prvtL2ProtocolsEntry 2 } + +prvtL2ProtocolEthertype OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The protocol Ethertype." + ::= { prvtL2ProtocolsEntry 3 } + +prvtL2ProtocolMAC OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The protocol multicast MAC address + used for PDU distribution." + ::= { prvtL2ProtocolsEntry 4 } + +prvtL2ReplaceMAC OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The replacement multicast MAC address." + ::= { prvtL2ProtocolsEntry 5 } + +prvtL2TunnProfMapProtoTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtL2TunnProfMapProtoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contain actions configured + for each L2 protocol per TLS tunneling profile." + ::= { prvtL2TunnelingMIBObjects 4 } + +prvtL2TunnProfMapProtoEntry OBJECT-TYPE + SYNTAX PrvtL2TunnProfMapProtoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table contains the + action for the specified profile and L2 protocol" + INDEX { prvtL2TunnProfileName, prvtL2ProtocolName } + ::= { prvtL2TunnProfMapProtoTable 1 } + +PrvtL2TunnProfMapProtoEntry ::= SEQUENCE { + prvtL2TunnProfMapProtoRowStatus RowStatus, + prvtL2TunnProfMapProtoAction INTEGER +} + +prvtL2TunnProfMapProtoRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create/delete rows" + ::= { prvtL2TunnProfMapProtoEntry 1 } + +prvtL2TunnProfMapProtoAction OBJECT-TYPE + SYNTAX INTEGER { tunnel(1), discard(2), peer(3), peerAndPass(4) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The action for this TLS tunneled protocol" + ::= { prvtL2TunnProfMapProtoEntry 2 } + +prvtL2TunnSapTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtL2TunnSapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains assignments of profiles to SAPs." + ::= { prvtL2TunnelingMIBObjects 5 } + +prvtL2TunnSapEntry OBJECT-TYPE + SYNTAX PrvtL2TunnSapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table contains information + about the mapping between SAP and L2 Tunneling profiles." + AUGMENTS { sapEntry } + ::= { prvtL2TunnSapTable 1 } + +PrvtL2TunnSapEntry ::= SEQUENCE { + prvtL2TunnSapProfile PrvtL2TunnelProfileNameOrNoneTC +} + +prvtL2TunnSapProfile OBJECT-TYPE + SYNTAX PrvtL2TunnelProfileNameOrNoneTC + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The profile associated with a SAP point. + Setting this object with an empty string + will remove a profile from the SAP." + ::= { prvtL2TunnSapEntry 1 } + +prvtL2TunnSdpTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtL2TunnSdpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains assignments of profiles to SDPs." + ::= { prvtL2TunnelingMIBObjects 6 } + +prvtL2TunnSdpEntry OBJECT-TYPE + SYNTAX PrvtL2TunnSdpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table contains information + about the mapping between SDP and L2 Tunneling profiles." + AUGMENTS { sdpEntry } + ::= { prvtL2TunnSdpTable 1 } + +PrvtL2TunnSdpEntry ::= SEQUENCE { + prvtL2TunnSdpProfile PrvtL2TunnelProfileNameOrNoneTC +} + +prvtL2TunnSdpProfile OBJECT-TYPE + SYNTAX PrvtL2TunnelProfileNameOrNoneTC + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The profile associated with an SDP point. + Setting this object with an empty string + will remove a profile from the SDP." + ::= { prvtL2TunnSdpEntry 1 } + +prvtL2TunnStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtL2TunnStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Table that provide statistics for each + tunneling point per protocol." + ::= { prvtL2TunnelingMIBObjects 8 } + +prvtL2TunnStatisticsEntry OBJECT-TYPE + SYNTAX PrvtL2TunnStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table contain the number of + tunneling RX and TX packets ." + INDEX { prvtL2TunnInterfaceName, prvtL2TunnProtocolName } + ::= { prvtL2TunnStatisticsTable 1 } + +PrvtL2TunnStatisticsEntry ::= SEQUENCE { + prvtL2TunnInterfaceName DisplayString, + prvtL2TunnProtocolName DisplayString, + prvtL2TunnRxPackets Counter32, + prvtL2TunnTxPackets Counter32 +} + +prvtL2TunnInterfaceName OBJECT-TYPE + SYNTAX DisplayString (SIZE(4..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interface name. + It is held in a string that is represented as follows: + SAP - (U/S/P|ag1-14|ies)[:VlanId[:VlanID]][:igmp] + SDP - (U/S/P:VlanId)|(ServiceId:A.B.C.D) + + e.g.: + SAP/SDP - 1/1/1:22:, 10.1.1.1:10" + ::= { prvtL2TunnStatisticsEntry 1 } + +prvtL2TunnProtocolName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "L2 Protocol Name" + ::= { prvtL2TunnStatisticsEntry 2 } + +prvtL2TunnRxPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Rx L2Tunneling packets" + ::= { prvtL2TunnStatisticsEntry 3 } + +prvtL2TunnTxPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Tx L2Tunneling packets" + ::= { prvtL2TunnStatisticsEntry 4 } + +prvtL2TunnClearStatistics OBJECT-TYPE + SYNTAX INTEGER { none(0), clear(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear L2Tunneling statistics for each tunneling point" + ::= { prvtL2TunnelingMIBObjects 9 } + +END -- end of module PRVT-L2TUNNELING-MIB. |