diff options
Diffstat (limited to 'MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB')
| -rw-r--r-- | MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB | 283 |
1 files changed, 283 insertions, 0 deletions
diff --git a/MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB b/MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB new file mode 100644 index 0000000..7419051 --- /dev/null +++ b/MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB @@ -0,0 +1,283 @@ +-- ********************************************************************* +-- ** +-- ** BATM Advanced Communications. +-- ** +-- ********************************************************************* +-- ** Filename: PRVT-MPLS-IF-MIB.mib +-- ** Project: T-Metro Switches. +-- ** Purpose: Private MIB +-- ********************************************************************* +-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications and contains +-- proprietary and confidential information. This file is made +-- available to authorized BATM customers on the express +-- condition that neither it, nor any of the information contained +-- therein, shall be disclosed to third parties or be used for any +-- purpose other than to replace, modify or upgrade firmware and/or +-- software components of BATM manufactured equipment within the +-- authorized customer's network, and that such transfer be +-- completed in accordance with the instructions provided by +-- BATM. Any other use is strictly prohibited. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. +-- +-- ---------------------------------------------------------------------------- + +PRVT-MPLS-IF-MIB DEFINITIONS ::= BEGIN + +IMPORTS + ifIndex + FROM IF-MIB + mpls + FROM PRVT-SWITCH-MIB + Integer32, MODULE-IDENTITY, OBJECT-TYPE + FROM SNMPv2-SMI + RowStatus, TEXTUAL-CONVENTION, TruthValue + FROM SNMPv2-TC; + +prvtMplsIfMIB MODULE-IDENTITY + LAST-UPDATED "201108050000Z" + ORGANIZATION + "BATM Advanced Communication" + CONTACT-INFO + "BATM/Telco Systems Support team + Email: + For North America: techsupport@telco.com + For North Europe: support@batm.de, info@batm.de + For the rest of the world: techsupport@telco.com" + DESCRIPTION + "This module includes configuration parameters for MPLS and RSVP interface specific parameters." + REVISION "201108050000Z" + DESCRIPTION + "Added ifaceMplsRsvpEgrLabelUsage, ifaceMplsLdpEgrLabelUsage, ifaceMplsSignalCapabilities." + REVISION "201004280000Z" + DESCRIPTION + "Initial version." + ::= { mpls 6 } + + +PrvtMplsIpAddressMask ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d.1d.1d.1d/1d" + STATUS current + DESCRIPTION + "An IPv4 address and mask represented as a 5 octet string. + First four octets are the IP address. The fifth octet is the IP mask." + SYNTAX OCTET STRING (SIZE(5)) + +EgressLabelUsageType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Possible egress label usage values." + SYNTAX INTEGER { global(0), implicitNull(1), explicitNull(2) } + +prvtMplsIfMIBObjects OBJECT IDENTIFIER + ::= { prvtMplsIfMIB 1 } + +prvtMplsIfaceObjs OBJECT IDENTIFIER + ::= { prvtMplsIfMIBObjects 1 } + +prvtMplsIfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtMplsIfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains object for configuring MPLS and LDP interface specific parameters." + ::= { prvtMplsIfaceObjs 1 } + +prvtMplsIfaceEntry OBJECT-TYPE + SYNTAX PrvtMplsIfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in prvtMplsIfaceTable." + INDEX { ifIndex } + ::= { prvtMplsIfaceTable 1 } + +PrvtMplsIfaceEntry ::= SEQUENCE { + ifaceMplsRowStatus RowStatus, + ifaceMplsEnable TruthValue, + ifaceMplsPHPEnable TruthValue, + ifaceMplsLdpHelloHoldTimer Integer32, + ifaceMplsLdpKeepaliveHoldTimer Integer32, + ifaceMplsRsvpEgrLabelUsage EgressLabelUsageType, + ifaceMplsLdpEgrLabelUsage EgressLabelUsageType, + ifaceMplsSignalCapabilities BITS +} + +ifaceMplsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for this interface." + ::= { prvtMplsIfaceEntry 1 } + +ifaceMplsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable or disable MPLS on this interface." + ::= { prvtMplsIfaceEntry 2 } + +ifaceMplsPHPEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable or disable Penultimate Hop Popping on this interface." + ::= { prvtMplsIfaceEntry 3 } + +ifaceMplsLdpHelloHoldTimer OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The LDP Hello Hold Time for this interface." + ::= { prvtMplsIfaceEntry 4 } + +ifaceMplsLdpKeepaliveHoldTimer OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The LDP Keep-alive Hold Time for this interface." + ::= { prvtMplsIfaceEntry 5 } + +ifaceMplsRsvpEgrLabelUsage OBJECT-TYPE + SYNTAX EgressLabelUsageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The egress label usage for RSVP." + ::= { prvtMplsIfaceEntry 7 } + +ifaceMplsLdpEgrLabelUsage OBJECT-TYPE + SYNTAX EgressLabelUsageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The egress label usage for LDP." + ::= { prvtMplsIfaceEntry 8 } + +ifaceMplsSignalCapabilities OBJECT-TYPE + SYNTAX BITS { sigCapsRsvp(0), sigCapsLdp(1), sigCapsData(7) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A bit map specifying the signaling capabilities that this MPLS + interface is to have. + Setting the bit sigCapsRsvp will enable RSVP signaling. + Setting the bit sigCapsLdp will enable LDP signaling. + The bit sigCapsData must always be set." + ::= { prvtMplsIfaceEntry 9 } + +prvtMplsRouteObjs OBJECT IDENTIFIER + ::= { prvtMplsIfMIBObjects 2 } + +prvtMplsRouteProtocolTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtMplsRouteProtocolEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the configuration of the egress and ingress routes for LDP label + packets." + ::= { prvtMplsRouteObjs 1 } + +prvtMplsRouteProtocolEntry OBJECT-TYPE + SYNTAX PrvtMplsRouteProtocolEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table represents the configuration of a particular route type for ingress + or egress." + INDEX { prvtMplsRouteProtocolDirection, + prvtMplsRouteProtocolType } + ::= { prvtMplsRouteProtocolTable 1 } + +PrvtMplsRouteProtocolEntry ::= SEQUENCE { + prvtMplsRouteProtocolDirection INTEGER, + prvtMplsRouteProtocolType INTEGER, + prvtMplsRouteProtocolRowStatus RowStatus +} + +prvtMplsRouteProtocolDirection OBJECT-TYPE + SYNTAX INTEGER { ingress(1), egress(2) } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The direction of the route that will be used to receive or send LDP packets." + ::= { prvtMplsRouteProtocolEntry 1 } + +prvtMplsRouteProtocolType OBJECT-TYPE + SYNTAX INTEGER { bgp(1), connected(2), isisl1(3), isisl2(4), + kernel(5), ospf(6), rip(7), static(8) } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of the route which will be used to send or receive LDP packets." + ::= { prvtMplsRouteProtocolEntry 2 } + +prvtMplsRouteProtocolRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create an entry in the table." + ::= { prvtMplsRouteProtocolEntry 3 } + +prvtMplsRouteAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtMplsRouteAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the egress and ingress routes for LDP label + packets." + ::= { prvtMplsRouteObjs 2 } + +prvtMplsRouteAddressEntry OBJECT-TYPE + SYNTAX PrvtMplsRouteAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in prvtMplsRouteAddressTable." + INDEX { prvtMplsRouteProtocolDirection, + prvtMplsRouteAddressIpAddrMask } + ::= { prvtMplsRouteAddressTable 1 } + +PrvtMplsRouteAddressEntry ::= SEQUENCE { + prvtMplsRouteAddressIpAddrMask PrvtMplsIpAddressMask, + prvtMplsRouteAddressRowStatus RowStatus +} + +prvtMplsRouteAddressIpAddrMask OBJECT-TYPE + SYNTAX PrvtMplsIpAddressMask + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP prefix of the route that will be used to send or receive LDP packets." + ::= { prvtMplsRouteAddressEntry 2 } + +prvtMplsRouteAddressRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is object is used to create an entry in the table." + ::= { prvtMplsRouteAddressEntry 4 } + +END -- end of module PRVT-MPLS-IF-MIB. |