diff options
Diffstat (limited to 'MIBS/transition/TN-DDMI-MIB')
| -rw-r--r-- | MIBS/transition/TN-DDMI-MIB | 482 |
1 files changed, 482 insertions, 0 deletions
diff --git a/MIBS/transition/TN-DDMI-MIB b/MIBS/transition/TN-DDMI-MIB new file mode 100644 index 0000000..dcf33e7 --- /dev/null +++ b/MIBS/transition/TN-DDMI-MIB @@ -0,0 +1,482 @@ +-- ***************************************************************** +-- TN-DDMI-MIB.smi: Transition Networks DDMI MIB. +-- +-- Copyright (c) 2015 by Transition Networks, Inc. +-- All rights reserved. +-- +-- ***************************************************************** + +TN-DDMI-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + MODULE-IDENTITY, OBJECT-TYPE + FROM SNMPv2-SMI + TEXTUAL-CONVENTION + FROM SNMPv2-TC + tnProducts FROM TRANSITION-SMI + TruthValue FROM SNMPv2-TC + TNDisplayString FROM TN-TC + TNInterfaceIndex FROM TN-TC + TNSfpTransceiver FROM TN-TC + ; + +tnDdmiMib MODULE-IDENTITY + LAST-UPDATED "201506120000Z" + ORGANIZATION "Transition Networks, Inc." + CONTACT-INFO + " Transition Networks + Technical Support + 10900 Red Circle Drive + Minnetonka, MN 55343 USA + Tel: +1-800-526-9267 + + E-mail: techsupport@transition.com" + DESCRIPTION + "This is a private version of DDMI" + REVISION "201410100000Z" + DESCRIPTION + "Editorial changes" + REVISION "201506120000Z" + DESCRIPTION + "Initial version" + ::= { tnProducts 152 } + + +tnDdmiMibObjects OBJECT IDENTIFIER + ::= { tnDdmiMib 1 } + +tnDdmiConfig OBJECT IDENTIFIER + ::= { tnDdmiMibObjects 2 } + +tnDdmiConfigGlobals OBJECT IDENTIFIER + ::= { tnDdmiConfig 1 } + +tnDdmiConfigGlobalsMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Global operation mode of DDMI. true is to enable the functions of DDMI + and false is to disable it." + ::= { tnDdmiConfigGlobals 1 } + +tnDdmiStatus OBJECT IDENTIFIER + ::= { tnDdmiMibObjects 3 } + +tnDdmiStatusInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF TNDdmiStatusInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is a DDMI status table of port interface." + ::= { tnDdmiStatus 2 } + +tnDdmiStatusInterfaceEntry OBJECT-TYPE + SYNTAX TNDdmiStatusInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry has a set of DDMI status." + INDEX { tnDdmiStatusInterfaceIfIndex } + ::= { tnDdmiStatusInterfaceTable 1 } + +TNDdmiStatusInterfaceEntry ::= SEQUENCE { + tnDdmiStatusInterfaceIfIndex TNInterfaceIndex, + tnDdmiStatusInterfaceA0Supported TruthValue, + tnDdmiStatusInterfaceA0SfpDetected TruthValue, + tnDdmiStatusInterfaceA0Vendor TNDisplayString, + tnDdmiStatusInterfaceA0PartNumber TNDisplayString, + tnDdmiStatusInterfaceA0SerialNumber TNDisplayString, + tnDdmiStatusInterfaceA0Revision TNDisplayString, + tnDdmiStatusInterfaceA0DateCode TNDisplayString, + tnDdmiStatusInterfaceA0SfpType TNSfpTransceiver, + tnDdmiStatusInterfaceA2Supported TruthValue, + tnDdmiStatusInterfaceA2CurrentTemperature TNDisplayString, + tnDdmiStatusInterfaceA2TemperatureHighAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TemperatureLowAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TemperatureHighWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TemperatureLowWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2CurrentVoltage TNDisplayString, + tnDdmiStatusInterfaceA2VoltageHighAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2VoltageLowAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2VoltageHighWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2VoltageLowWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2CurrentTxBias TNDisplayString, + tnDdmiStatusInterfaceA2TxBiasHighAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TxBiasLowAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TxBiasHighWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TxBiasLowWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2CurrentTxPower TNDisplayString, + tnDdmiStatusInterfaceA2TxPowerHighAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TxPowerLowAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TxPowerHighWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2TxPowerLowWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2CurrentRxPower TNDisplayString, + tnDdmiStatusInterfaceA2RxPowerHighAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2RxPowerLowAlarmThreshold TNDisplayString, + tnDdmiStatusInterfaceA2RxPowerHighWarnThreshold TNDisplayString, + tnDdmiStatusInterfaceA2RxPowerLowWarnThreshold TNDisplayString +} + +tnDdmiStatusInterfaceIfIndex OBJECT-TYPE + SYNTAX TNInterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Logical interface number of physical port." + ::= { tnDdmiStatusInterfaceEntry 1 } + +tnDdmiStatusInterfaceA0Supported OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Support transceiver status information or not. true is to supported and + false is not supported." + ::= { tnDdmiStatusInterfaceEntry 2 } + +tnDdmiStatusInterfaceA0SfpDetected OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SFP module is detected or not. true is to detected and false is not + detected." + ::= { tnDdmiStatusInterfaceEntry 3 } + +tnDdmiStatusInterfaceA0Vendor OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vendor name." + ::= { tnDdmiStatusInterfaceEntry 4 } + +tnDdmiStatusInterfaceA0PartNumber OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Part number." + ::= { tnDdmiStatusInterfaceEntry 5 } + +tnDdmiStatusInterfaceA0SerialNumber OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Serial number." + ::= { tnDdmiStatusInterfaceEntry 6 } + +tnDdmiStatusInterfaceA0Revision OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Revision." + ::= { tnDdmiStatusInterfaceEntry 7 } + +tnDdmiStatusInterfaceA0DateCode OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Date Code." + ::= { tnDdmiStatusInterfaceEntry 8 } + +tnDdmiStatusInterfaceA0SfpType OBJECT-TYPE + SYNTAX TNSfpTransceiver + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SFP type. none(0) means no SFP module. notSupported(1) means SFP module + is not supported. sfp100Fx(2) means SFP 100BASE-FX. sfp100BaseLx(3) + means SFP 100BASE-LX. sfp100BaseBx10(4) means SFP 100BASE-BX10. + sfp100BaseT(5) means SFP 100BASE-T. sfp1000BaseBx10(6) means SFP + 1000BASE-BX10. sfp1000BaseT(7) means SFP 1000BASE-T. sfp1000BaseCx(8) + means SFP 1000BASE-CX. sfp1000BaseSx(9) means SFP 1000BASE-SX. + sfp1000BaseLx(10) means SFP 1000BASE-LX. sfp1000BaseX(11) means SFP + 1000BASE-X. sfp2G5(12) means SFP 2.5G. sfp5G(13) means SFP 5G. + sfp10G(14) means SFP 10G." + ::= { tnDdmiStatusInterfaceEntry 9 } + +tnDdmiStatusInterfaceA2Supported OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Support DDMI status information or not. true is to supported and false + is not supported." + ::= { tnDdmiStatusInterfaceEntry 1002 } + +tnDdmiStatusInterfaceA2CurrentTemperature OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current temperature in Celcius." + ::= { tnDdmiStatusInterfaceEntry 1003 } + +tnDdmiStatusInterfaceA2TemperatureHighAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature high alarm threshold in Celcius." + ::= { tnDdmiStatusInterfaceEntry 1004 } + +tnDdmiStatusInterfaceA2TemperatureLowAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature low alarm threshold in Celcius." + ::= { tnDdmiStatusInterfaceEntry 1005 } + +tnDdmiStatusInterfaceA2TemperatureHighWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature high warning threshold in Celcius." + ::= { tnDdmiStatusInterfaceEntry 1006 } + +tnDdmiStatusInterfaceA2TemperatureLowWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature low warning threshold in Celcius." + ::= { tnDdmiStatusInterfaceEntry 1007 } + +tnDdmiStatusInterfaceA2CurrentVoltage OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current voltage in Volt." + ::= { tnDdmiStatusInterfaceEntry 1008 } + +tnDdmiStatusInterfaceA2VoltageHighAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Voltage high alarm threshold in Volt." + ::= { tnDdmiStatusInterfaceEntry 1009 } + +tnDdmiStatusInterfaceA2VoltageLowAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Voltage low alarm threshold in Volt." + ::= { tnDdmiStatusInterfaceEntry 1010 } + +tnDdmiStatusInterfaceA2VoltageHighWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Voltage high warning threshold in Volt." + ::= { tnDdmiStatusInterfaceEntry 1011 } + +tnDdmiStatusInterfaceA2VoltageLowWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Voltage low warning threshold in Volt." + ::= { tnDdmiStatusInterfaceEntry 1012 } + +tnDdmiStatusInterfaceA2CurrentTxBias OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Tx bias in mA." + ::= { tnDdmiStatusInterfaceEntry 1013 } + +tnDdmiStatusInterfaceA2TxBiasHighAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx bias high alarm threshold in mA." + ::= { tnDdmiStatusInterfaceEntry 1014 } + +tnDdmiStatusInterfaceA2TxBiasLowAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx bias low alarm threshold in mA." + ::= { tnDdmiStatusInterfaceEntry 1015 } + +tnDdmiStatusInterfaceA2TxBiasHighWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx bias high warning threshold in mA." + ::= { tnDdmiStatusInterfaceEntry 1016 } + +tnDdmiStatusInterfaceA2TxBiasLowWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx bias low warning threshold in mA." + ::= { tnDdmiStatusInterfaceEntry 1017 } + +tnDdmiStatusInterfaceA2CurrentTxPower OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Tx power in mV." + ::= { tnDdmiStatusInterfaceEntry 1018 } + +tnDdmiStatusInterfaceA2TxPowerHighAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx power high alarm threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1019 } + +tnDdmiStatusInterfaceA2TxPowerLowAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx power low alarm threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1020 } + +tnDdmiStatusInterfaceA2TxPowerHighWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx power high warning threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1021 } + +tnDdmiStatusInterfaceA2TxPowerLowWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx power low warning threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1022 } + +tnDdmiStatusInterfaceA2CurrentRxPower OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Rx power in mV." + ::= { tnDdmiStatusInterfaceEntry 1023 } + +tnDdmiStatusInterfaceA2RxPowerHighAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rx power high alarm threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1024 } + +tnDdmiStatusInterfaceA2RxPowerLowAlarmThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rx power low alarm threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1025 } + +tnDdmiStatusInterfaceA2RxPowerHighWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rx power high warning threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1026 } + +tnDdmiStatusInterfaceA2RxPowerLowWarnThreshold OBJECT-TYPE + SYNTAX TNDisplayString (SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rx power low warning threshold in mV." + ::= { tnDdmiStatusInterfaceEntry 1027 } + +tnDdmiMibConformance OBJECT IDENTIFIER + ::= { tnDdmiMib 2 } + +tnDdmiMibCompliances OBJECT IDENTIFIER + ::= { tnDdmiMibConformance 1 } + +tnDdmiMibGroups OBJECT IDENTIFIER + ::= { tnDdmiMibConformance 2 } + +tnDdmiConfigGlobalsInfoGroup OBJECT-GROUP + OBJECTS { tnDdmiConfigGlobalsMode } + STATUS current + DESCRIPTION + "A collection of objects suitable for bulk operations." + ::= { tnDdmiMibGroups 1 } + +tnDdmiStatusInterfaceTableInfoGroup OBJECT-GROUP + OBJECTS { tnDdmiStatusInterfaceA0Supported, + tnDdmiStatusInterfaceA0SfpDetected, + tnDdmiStatusInterfaceA0Vendor, + tnDdmiStatusInterfaceA0PartNumber, + tnDdmiStatusInterfaceA0SerialNumber, + tnDdmiStatusInterfaceA0Revision, + tnDdmiStatusInterfaceA0DateCode, + tnDdmiStatusInterfaceA0SfpType, + tnDdmiStatusInterfaceA2Supported, + tnDdmiStatusInterfaceA2CurrentTemperature, + tnDdmiStatusInterfaceA2TemperatureHighAlarmThreshold, + tnDdmiStatusInterfaceA2TemperatureLowAlarmThreshold, + tnDdmiStatusInterfaceA2TemperatureHighWarnThreshold, + tnDdmiStatusInterfaceA2TemperatureLowWarnThreshold, + tnDdmiStatusInterfaceA2CurrentVoltage, + tnDdmiStatusInterfaceA2VoltageHighAlarmThreshold, + tnDdmiStatusInterfaceA2VoltageLowAlarmThreshold, + tnDdmiStatusInterfaceA2VoltageHighWarnThreshold, + tnDdmiStatusInterfaceA2VoltageLowWarnThreshold, + tnDdmiStatusInterfaceA2CurrentTxBias, + tnDdmiStatusInterfaceA2TxBiasHighAlarmThreshold, + tnDdmiStatusInterfaceA2TxBiasLowAlarmThreshold, + tnDdmiStatusInterfaceA2TxBiasHighWarnThreshold, + tnDdmiStatusInterfaceA2TxBiasLowWarnThreshold, + tnDdmiStatusInterfaceA2CurrentTxPower, + tnDdmiStatusInterfaceA2TxPowerHighAlarmThreshold, + tnDdmiStatusInterfaceA2TxPowerLowAlarmThreshold, + tnDdmiStatusInterfaceA2TxPowerHighWarnThreshold, + tnDdmiStatusInterfaceA2TxPowerLowWarnThreshold, + tnDdmiStatusInterfaceA2CurrentRxPower, + tnDdmiStatusInterfaceA2RxPowerHighAlarmThreshold, + tnDdmiStatusInterfaceA2RxPowerLowAlarmThreshold, + tnDdmiStatusInterfaceA2RxPowerHighWarnThreshold, + tnDdmiStatusInterfaceA2RxPowerLowWarnThreshold } + STATUS current + DESCRIPTION + "A collection of objects suitable for bulk operations." + ::= { tnDdmiMibGroups 2 } + +tnDdmiMibCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the implementation." + + MODULE -- this module + + MANDATORY-GROUPS { tnDdmiConfigGlobalsInfoGroup, + tnDdmiStatusInterfaceTableInfoGroup } + + ::= { tnDdmiMibCompliances 1 } + +END |