diff options
Diffstat (limited to 'MIBS/transition/TN-DEV-SYS-SNMPMGMT-MIB')
| -rw-r--r-- | MIBS/transition/TN-DEV-SYS-SNMPMGMT-MIB | 587 |
1 files changed, 587 insertions, 0 deletions
diff --git a/MIBS/transition/TN-DEV-SYS-SNMPMGMT-MIB b/MIBS/transition/TN-DEV-SYS-SNMPMGMT-MIB new file mode 100644 index 0000000..5f02b23 --- /dev/null +++ b/MIBS/transition/TN-DEV-SYS-SNMPMGMT-MIB @@ -0,0 +1,587 @@ +-- *********************************************************************************************** +-- TN-DEV-SYS-SNMPMGMT-MIB.smi: Transition Networks Enterprise MIB for TN snmp management feature +-- +-- Copyright (c) 2014 by Transition Networks, Inc. +-- All rights reserved. +-- +-- *********************************************************************************************** +-- +TN-DEV-SYS-SNMPMGMT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI + DisplayString, RowStatus, TDomain, TAddress FROM SNMPv2-TC + InetAddressType, InetAddress FROM INET-ADDRESS-MIB + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + entPhysicalIndex FROM ENTITY-MIB + tnDevMgmt FROM TN-MGMT-MIB + SnmpEngineID FROM SNMP-FRAMEWORK-MIB + PortList FROM Q-BRIDGE-MIB; + +tnDevSysSnmpmgmt MODULE-IDENTITY + LAST-UPDATED "201402190000Z" + ORGANIZATION "Transition Networks, Inc." + CONTACT-INFO + " Transition Networks + Technical Support + 10900 Red Circle Drive + Minnetonka, MN 55343 USA + Tel: +1-800-526-9267 + + E-mail: techsupport@transition.com" + + DESCRIPTION + "The mib provides functionalities for SNMP managing in TN modules." + + REVISION "201402190000Z" + DESCRIPTION + "Added tnDevSysSnmpTrapCfgVersion, tnDevSysSnmpTrapCfgInformMode, + tnDevSysSnmpTrapCfgInformTimeout, tnDevSysSnmpTrapCfgInformRetry to + tnDevSysSnmpTrapCfgTable." + + REVISION "201305160000Z" + DESCRIPTION + "Initial Revision of this module" + ::= { tnDevMgmt 14 } + + +tnDevSysSnmpMgmtTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnDevSysSnmpMgmtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table to manage SNMP status for each device." + ::= { tnDevSysSnmpmgmt 1 } + +tnDevSysSnmpMgmtEntry OBJECT-TYPE + SYNTAX TnDevSysSnmpMgmtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing SNMP status for each device." + INDEX { entPhysicalIndex } + ::= { tnDevSysSnmpMgmtTable 1 } + +TnDevSysSnmpMgmtEntry ::= + SEQUENCE { + tnDevSysSnmpAccess INTEGER, + tnDevSysSnmpVersion DisplayString, + tnDevSysSnmpReadCommunity DisplayString, + tnDevSysSnmpWriteCommunity DisplayString + } + +tnDevSysSnmpAccess OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The status of SNMP. Set this value to enabled(1) to enable SNMP access, + set this value to disabled(2) to disable the SNMP access." + ::= { tnDevSysSnmpMgmtEntry 1 } + +tnDevSysSnmpVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..8)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The current active SNMP version. Possible versions are: + v1: SNMP supported version 1. + v2c: SNMP supported version 2c. + v3: SNMP supported version 3." + ::= { tnDevSysSnmpMgmtEntry 2 } + +tnDevSysSnmpReadCommunity OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..255)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SNMP Read-community string. Valid in v1/v2c version, default value is 'public'." + ::= { tnDevSysSnmpMgmtEntry 3 } + +tnDevSysSnmpWriteCommunity OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..255)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SNMP Write-community string. Valid in v1/v2c version, default value is 'private'." + ::= { tnDevSysSnmpMgmtEntry 4 } + +tnDevSysSnmpLocal OBJECT IDENTIFIER ::= { tnDevSysSnmpmgmt 3 } + +tnDevSysSnmpLocalEngineID OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SNMPv3 engine ID." + ::= { tnDevSysSnmpLocal 1 } + +tnDevSysSnmpTrapManagerTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnDevSysSnmpTrapManagerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table to maintain the engine IDs of the SNMPv3 trap managers." + ::= { tnDevSysSnmpmgmt 4 } + +tnDevSysSnmpTrapManagerEntry OBJECT-TYPE + SYNTAX TnDevSysSnmpTrapManagerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in this table, containing the engineID + of a SNMPv3 trap manager." + INDEX { tnDevSysSnmpTrapManagerIndex } + ::= { tnDevSysSnmpTrapManagerTable 1 } + +TnDevSysSnmpTrapManagerEntry ::= SEQUENCE +{ + tnDevSysSnmpTrapManagerIndex Integer32, + tnDevSysSnmpTrapManagerAddrTDomain TDomain, + tnDevSysSnmpTrapManagerAddrTAddress TAddress, + tnDevSysSnmpTrapManagerEngineID SnmpEngineID, + tnDevSysSnmpTrapManagerStatus RowStatus +} + +tnDevSysSnmpTrapManagerIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index of this table." + ::= { tnDevSysSnmpTrapManagerEntry 1 } + +tnDevSysSnmpTrapManagerAddrTDomain OBJECT-TYPE + SYNTAX TDomain + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transport address type of the SNMP trap manager. The default + value of this variable is snmpUDPDomain." + ::= { tnDevSysSnmpTrapManagerEntry 2 } + +tnDevSysSnmpTrapManagerAddrTAddress OBJECT-TYPE + SYNTAX TAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transport address of the SNMP trap manager. For snmpUDPDomain, + a TAddress is 6 octets long, the initial 4 octets containing the + IP-address in network-byte order and the last 2 containing the UDP + port in network-byte order." + ::= { tnDevSysSnmpTrapManagerEntry 3 } + +tnDevSysSnmpTrapManagerEngineID OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The engine ID of the SNMPv3 trap manager. " + ::= { tnDevSysSnmpTrapManagerEntry 4 } + +tnDevSysSnmpTrapManagerStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION "This variable is used to dynamically create or delete an entry for this table." + ::= { tnDevSysSnmpTrapManagerEntry 20 } + +tnDevSysSnmpTrapCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnDevSysSnmpTrapCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table to maintain the SNMP trap configurations." + ::= { tnDevSysSnmpmgmt 5 } + +tnDevSysSnmpTrapCfgEntry OBJECT-TYPE + SYNTAX TnDevSysSnmpTrapCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in this table, containing the SNMP trap configurations." + INDEX { entPhysicalIndex } + ::= { tnDevSysSnmpTrapCfgTable 1 } + +TnDevSysSnmpTrapCfgEntry ::= SEQUENCE +{ + tnDevSysSnmpTrapCfgMode INTEGER, + tnDevSysSnmpTrapCfgCommunity SnmpAdminString, + tnDevSysSnmpTrapCfgAuthFailure INTEGER, + tnDevSysSnmpTrapCfgLinkChange INTEGER, + tnDevSysSnmpTrapCfgEngineIdProbe INTEGER, + tnDevSysSnmpTrapCfgAdminEngineId SnmpEngineID, + tnDevSysSnmpTrapCfgSecurityName SnmpAdminString, + tnDevSysSnmpTrapCfgVersion INTEGER, + tnDevSysSnmpTrapCfgInformMode INTEGER, + tnDevSysSnmpTrapCfgInformTimeout INTEGER, + tnDevSysSnmpTrapCfgInformRetry INTEGER +} + +tnDevSysSnmpTrapCfgMode OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SNMP trap mode operation. Possible modes are: + enabled - Enable SNMP trap mode operation. + disabled - Disable SNMP trap mode operation." + ::= { tnDevSysSnmpTrapCfgEntry 1 } + +tnDevSysSnmpTrapCfgCommunity OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION " the community access string when sending SNMP trap packet." + ::= { tnDevSysSnmpTrapCfgEntry 2 } + +tnDevSysSnmpTrapCfgAuthFailure OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates that the SNMP entity is permitted to generate authentication failure traps. Possible modes are: + enabled - Enable SNMP trap authentication failure. + disabled - Disable SNMP trap authentication failure." + ::= { tnDevSysSnmpTrapCfgEntry 3 } + +tnDevSysSnmpTrapCfgLinkChange OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap link-up and link-down mode operation. Possible modes are: + enabled - Enable SNMP trap link-up and link-down mode operation. + disabled - Disable SNMP trap link-up and link-down mode operation." + ::= { tnDevSysSnmpTrapCfgEntry 4 } + +tnDevSysSnmpTrapCfgEngineIdProbe OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap probe security engine ID mode of operation. Possible values are: + enabled - Enable SNMP trap probe security engine ID mode of operation. + disabled - Disable SNMP trap probe security engine ID mode of operation." + ::= { tnDevSysSnmpTrapCfgEntry 5 } + +tnDevSysSnmpTrapCfgAdminEngineId OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for authentication and privacy. A unique engine ID for these traps and informs is needed. When tnDevSysSnmpTrapCfgEngineIdProbe is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field is used." + ::= { tnDevSysSnmpTrapCfgEntry 6 } + +tnDevSysSnmpTrapCfgSecurityName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for authentication and privacy. A unique security name is needed when traps and informs are enabled." + ::= { tnDevSysSnmpTrapCfgEntry 7 } + +tnDevSysSnmpTrapCfgVersion OBJECT-TYPE + SYNTAX INTEGER + { + v1(1), + v2c(2), + v3(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The current active SNMP Trap version. Possible versions are: + v1: SNMP supported version 1. + v2c: SNMP supported version 2c. + v3: SNMP supported version 3." + ::= { tnDevSysSnmpTrapCfgEntry 8 } + +tnDevSysSnmpTrapCfgInformMode OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap inform mode operation. Possible modes are: + Enabled: Enable SNMP trap inform mode operation. + Disabled: Disable SNMP trap inform mode operation." + ::= { tnDevSysSnmpTrapCfgEntry 9 } + +tnDevSysSnmpTrapCfgInformTimeout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147 seconds." + ::= { tnDevSysSnmpTrapCfgEntry 10 } + +tnDevSysSnmpTrapCfgInformRetry OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap inform number of retry times. The allowed range is 0 to 255." + ::= { tnDevSysSnmpTrapCfgEntry 11 } + +-- ------------------------------------------------------ +-- ------------------------------------------------------ +-- ------------------------------------------------------ +-- ------------------------------------------------------ + + + +tnDevSysSnmpTrapServerCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnDevSysSnmpTrapServerCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table to maintain the SNMP trap configurations." + ::= { tnDevSysSnmpmgmt 6 } + +tnDevSysSnmpTrapServerCfgEntry OBJECT-TYPE + SYNTAX TnDevSysSnmpTrapServerCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in this table, containing the SNMP trap configurations." + INDEX { IMPLIED tnDevSysSnmpTrapServerCfgName } + ::= { tnDevSysSnmpTrapServerCfgTable 1 } + +TnDevSysSnmpTrapServerCfgEntry ::= SEQUENCE +{ + tnDevSysSnmpTrapServerCfgName SnmpAdminString, + tnDevSysSnmpTrapServerCfgMode INTEGER, + tnDevSysSnmpTrapServerCfgVersion INTEGER, + tnDevSysSnmpTrapServerCfgCommunity SnmpAdminString, + tnDevSysSnmpTrapServerCfgDstAddress InetAddress, + tnDevSysSnmpTrapServerCfgDstPort INTEGER, + tnDevSysSnmpTrapServerCfgInformMode INTEGER, + tnDevSysSnmpTrapServerCfgInformTimeout INTEGER, + tnDevSysSnmpTrapServerCfgInformRetry INTEGER, + tnDevSysSnmpTrapServerCfgEngineIdProbe INTEGER, + tnDevSysSnmpTrapServerCfgAdminEngineId SnmpEngineID, + tnDevSysSnmpTrapServerCfgSecurityName SnmpAdminString, + tnDevSysSnmpTrapServerCfgEvtWstart INTEGER, + tnDevSysSnmpTrapServerCfgEvtCstart INTEGER, + tnDevSysSnmpTrapServerCfgEvtLinkUp PortList, + tnDevSysSnmpTrapServerCfgEvtLinkDown PortList, + tnDevSysSnmpTrapServerCfgEvtLldp PortList, + tnDevSysSnmpTrapServerCfgEvtAuthFail INTEGER, + tnDevSysSnmpTrapServerCfgEvtStp INTEGER, + tnDevSysSnmpTrapServerCfgEvtRmon INTEGER, + tnDevSysSnmpTrapServerCfgRowStatus RowStatus +} + +tnDevSysSnmpTrapServerCfgName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION " the trap configuration name." + ::= { tnDevSysSnmpTrapServerCfgEntry 1 } + +tnDevSysSnmpTrapServerCfgMode OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SNMP trap mode operation. Possible modes are: + enabled - Enable SNMP trap mode operation. + disabled - Disable SNMP trap mode operation." + ::= { tnDevSysSnmpTrapServerCfgEntry 2 } + +tnDevSysSnmpTrapServerCfgVersion OBJECT-TYPE + SYNTAX INTEGER + { + v1(1), + v2c(2), + v3(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The current active SNMP Trap version. Possible versions are: + v1: SNMP supported version 1. + v2c: SNMP supported version 2c. + v3: SNMP supported version 3." + ::= { tnDevSysSnmpTrapServerCfgEntry 3 } + +tnDevSysSnmpTrapServerCfgCommunity OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION " the community access string when sending SNMP trap packet." + ::= { tnDevSysSnmpTrapServerCfgEntry 4 } + +tnDevSysSnmpTrapServerCfgDstAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates destination ip address." + ::= { tnDevSysSnmpTrapServerCfgEntry 5 } + +tnDevSysSnmpTrapServerCfgDstPort OBJECT-TYPE + SYNTAX INTEGER(1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The allowed range for the port number is from 1 through 65535." + ::= { tnDevSysSnmpTrapServerCfgEntry 6 } + +tnDevSysSnmpTrapServerCfgInformMode OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap inform mode operation. Possible modes are: + Enabled: Enable SNMP trap inform mode operation. + Disabled: Disable SNMP trap inform mode operation." + ::= { tnDevSysSnmpTrapServerCfgEntry 7 } + +tnDevSysSnmpTrapServerCfgInformTimeout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147 seconds." + ::= { tnDevSysSnmpTrapServerCfgEntry 8 } + +tnDevSysSnmpTrapServerCfgInformRetry OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap inform number of retry times. The allowed range is 0 to 255." + ::= { tnDevSysSnmpTrapServerCfgEntry 9 } + +tnDevSysSnmpTrapServerCfgEngineIdProbe OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap probe security engine ID mode of operation. Possible values are: + enabled - Enable SNMP trap probe security engine ID mode of operation. + disabled - Disable SNMP trap probe security engine ID mode of operation." + ::= { tnDevSysSnmpTrapServerCfgEntry 10 } + +tnDevSysSnmpTrapServerCfgAdminEngineId OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for authentication and privacy. A unique engine ID for these traps and informs is needed. When tnDevSysSnmpTrapCfgEngineIdProbe is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field is used." + ::= { tnDevSysSnmpTrapServerCfgEntry 11 } + +tnDevSysSnmpTrapServerCfgSecurityName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for authentication and privacy. A unique security name is needed when traps and informs are enabled." + ::= { tnDevSysSnmpTrapServerCfgEntry 12 } + +tnDevSysSnmpTrapServerCfgEvtWstart OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION " " + ::= { tnDevSysSnmpTrapServerCfgEntry 13 } + +tnDevSysSnmpTrapServerCfgEvtCstart OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION " " + ::= { tnDevSysSnmpTrapServerCfgEntry 14 } + +tnDevSysSnmpTrapServerCfgEvtLinkUp OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION " " + ::= { tnDevSysSnmpTrapServerCfgEntry 15 } + +tnDevSysSnmpTrapServerCfgEvtLinkDown OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION " " + ::= { tnDevSysSnmpTrapServerCfgEntry 16 } + +tnDevSysSnmpTrapServerCfgEvtLldp OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION " " + ::= { tnDevSysSnmpTrapServerCfgEntry 17 } + +tnDevSysSnmpTrapServerCfgEvtAuthFail OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates that the SNMP entity is permitted to generate authentication failure traps. Possible modes are: + enabled - Enable SNMP trap authentication failure. + disabled - Disable SNMP trap authentication failure." + ::= { tnDevSysSnmpTrapServerCfgEntry 18 } + +tnDevSysSnmpTrapServerCfgEvtStp OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION " " + ::= { tnDevSysSnmpTrapServerCfgEntry 19 } + +tnDevSysSnmpTrapServerCfgEvtRmon OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION " " + ::= { tnDevSysSnmpTrapServerCfgEntry 20 } + +tnDevSysSnmpTrapServerCfgRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This indicates the status of the entry, and is used to create + and delete entries in this table." + ::= { tnDevSysSnmpTrapServerCfgEntry 21 } + + +tnDevSysSnmpTrapGlobalCfgMode OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The global SNMP trap mode operation. Possible modes are: + enabled - Enable SNMP trap mode operation. + disabled - Disable SNMP trap mode operation." + ::= { tnDevSysSnmpmgmt 7 } + +END |