diff options
Diffstat (limited to 'MIBS/transition/TN-LLDP-MIB')
| -rw-r--r-- | MIBS/transition/TN-LLDP-MIB | 2142 |
1 files changed, 2142 insertions, 0 deletions
diff --git a/MIBS/transition/TN-LLDP-MIB b/MIBS/transition/TN-LLDP-MIB new file mode 100644 index 0000000..68ef48c --- /dev/null +++ b/MIBS/transition/TN-LLDP-MIB @@ -0,0 +1,2142 @@ +-- *****************************************************************
+-- TN-LLDP-MIB.mib : TN LLPD private MIB
+--
+-- Copyright (c) 2015 by Transition Networks, Inc.
+-- All rights reserved.
+--
+-- *****************************************************************
+
+TN-LLDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ MODULE-IDENTITY, OBJECT-TYPE
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ tnProducts
+ FROM TRANSITION-SMI
+ Integer32 FROM SNMPv2-SMI
+ Unsigned32 FROM SNMPv2-SMI
+ TruthValue FROM SNMPv2-TC
+ TNDisplayString FROM TN-TC
+ TNInteger64 FROM TN-TC
+ TNInterfaceIndex FROM TN-TC
+ TNRowEditorState FROM TN-TC
+ TNUnsigned16 FROM TN-TC
+ TNUnsigned64 FROM TN-TC
+ TNUnsigned8 FROM TN-TC
+ ;
+
+tnLldpMib MODULE-IDENTITY
+ LAST-UPDATED "201506080000Z"
+ ORGANIZATION "Transition Networks, Inc."
+ CONTACT-INFO
+ "Transition Networks
+ Technical Support
+
+ 10900 Red Circle Drive
+ Minnetonka, MN 55343 USA
+ Tel: +1-800-526-9267
+
+ E-mail: techsupport@transition.com"
+ DESCRIPTION
+ "This is a private version of the LLDP MIB"
+ REVISION "201506080000Z"
+ DESCRIPTION
+ "Initial version"
+ ::= { tnProducts 151 }
+
+TNlldpAdminState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This enumerations the admin state."
+ SYNTAX INTEGER { disabled(0), txAndRx(1), txOnly(2), rxOnly(3) }
+
+TNlldpmedAltitudeType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This enumerations the altitude type."
+ SYNTAX INTEGER { meters(1), floors(2) }
+
+TNlldpmedCivicAddressType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This enumerations the civic address type."
+ SYNTAX INTEGER { state(1), county(2), city(3), district(4), block(5), street(6), leadingStreetDirection(16), trailingStreetSuffix(17), streetSuffix(18), houseNo(19), houseNoSuffix(20), landmark(21), additionalInformation(22), name(23), zipCode(24), building(25), apartment(26), floor(27), roomNumber(28), placeType(29), postalCommunityName(30), poBox(31), additionalCode(32) }
+
+TNlldpmedDatumType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This enumerations the datum (geodetic system)."
+ SYNTAX INTEGER { wgs84(1), nad83navd88(2), nad83mllw(3) }
+
+TNlldpmedDeviceType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This enumerations the device type that the device shall operate as."
+ SYNTAX INTEGER { connectivity(0), endpoint(1) }
+
+TNlldpmedRemoteDeviceType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This enumerations the remote neighbor's device type."
+ SYNTAX INTEGER { notDefined(0), endpointClassI(1), endpointClassII(2), endpointClassIII(3), networkConnectivity(4), reserved(5) }
+
+TNlldpmedRemoteNetworkPolicyApplicationType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This enumerations the remote neighbor's network policy's application
+ type."
+ SYNTAX INTEGER { voice(1), voiceSignaling(2), guestVoice(3), guestVoiceSignaling(4), softphoneVoice(5), videoConferencing(6), streamingVideo(7), videoSignaling(8) }
+
+tnLldpMibObjects OBJECT IDENTIFIER
+ ::= { tnLldpMib 1 }
+
+tnLldpConfig OBJECT IDENTIFIER
+ ::= { tnLldpMibObjects 2 }
+
+tnLldpConfigGlobal OBJECT IDENTIFIER
+ ::= { tnLldpConfig 1 }
+
+tnLldpConfigGlobalReInitDelay OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set the LLDP tx reinitialization delay in seconds. Valid range 1-10.
+
+ When a port is disabled, LLDP is disabled or the switch is rebooted, a
+ LLDP shutdown frame is transmitted to the neighboring units, signaling
+ that the LLDP information isn't valid anymore.
+
+ Tx reinitialization delay controls the amount of seconds between the
+ shutdown frame and a new LLDP initialization.
+
+
+
+ Note: Must be less than 0.25 times the Tx interval."
+ ::= { tnLldpConfigGlobal 1 }
+
+tnLldpConfigGlobalMsgTxHold OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set the LLDP tx hold times . Valid range 2-10.
+
+ Each LLDP frame contains information about how long time the
+ information in the LLDP frame shall be considered valid. The LLDP
+ information valid period is set to tx hold times multiplied by tx
+ interval seconds."
+ ::= { tnLldpConfigGlobal 2 }
+
+tnLldpConfigGlobalMsgTxInterval OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set the LLDP tx interval in seconds.
+
+ The switch periodically transmits LLDP frames to its neighbors for
+ having the network discovery information up-to-date. The interval
+ between each LLDP frame is determined by the tx Interval value.
+
+
+
+ Valid range 5-32768 seconds."
+ ::= { tnLldpConfigGlobal 3 }
+
+tnLldpConfigGlobalTxDelay OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set the LLDP tx delay in seconds. Valid range 1-8192.
+
+ If some configuration is changed (e.g. the IP address) a new LLDP frame
+ is transmitted, but the time between the LLDP frames will always be at
+ least the value of tx delay seconds.
+
+ Note: tx Delay cannot be larger than 1/4 of the tx interval."
+ ::= { tnLldpConfigGlobal 4 }
+
+tnLldpConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to configure LLDP configurations for a specific
+ interface."
+ ::= { tnLldpConfig 2 }
+
+tnLldpConfigEntry OBJECT-TYPE
+ SYNTAX TNLldpConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of control parameters"
+ INDEX { tnLldpConfigIfIndex }
+ ::= { tnLldpConfigTable 1 }
+
+TNLldpConfigEntry ::= SEQUENCE {
+ tnLldpConfigIfIndex TNInterfaceIndex,
+ tnLldpConfigAdminState TNlldpAdminState,
+ tnLldpConfigCdpAware TruthValue,
+ tnLldpConfigOptionalTlvs TNUnsigned8
+}
+
+tnLldpConfigIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpConfigEntry 1 }
+
+tnLldpConfigAdminState OBJECT-TYPE
+ SYNTAX TNlldpAdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the LLDP admin state for the interface."
+ ::= { tnLldpConfigEntry 3 }
+
+tnLldpConfigCdpAware OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables/disables CDP awareness for the interface.
+
+ CDP is Cisco's equivalent to LLDP.
+
+
+
+ The CDP operation is restricted to decoding incoming CDP frames (The
+ switch doesn't transmit CDP frames). CDP frames are only decoded if
+ LLDP on the port is enabled.
+
+
+
+ Only CDP TLVs that can be mapped to a corresponding field in the LLDP
+ neighbors' table are decoded. All other TLVs are discarded
+ (Unrecognized CDP TLVs and discarded CDP frames are not shown in the
+ LLDP statistics.).
+
+ CDP TLVs are mapped onto LLDP neighbors' table as shown below.
+
+ CDP TLV 'Device ID' is mapped to the LLDP 'Chassis ID' field.
+
+ CDP TLV 'Address' is mapped to the LLDP 'Management Address' field. The
+ CDP address TLV can contain multiple addresses, but only the first
+ address is shown in the LLDP neighbors table.
+
+ CDP TLV 'Port ID' is mapped to the LLDP 'Port ID' field.
+
+ CDP TLV 'Version and Platform' is mapped to the LLDP 'System
+ Description' field.
+
+ Both the CDP and LLDP support 'system capabilities', but the CDP
+ capabilities cover capabilities that are not part of the LLDP. These
+ capabilities are shown as 'others' in the LLDP neighbors' table.
+
+
+
+ If all ports have CDP awareness disabled the switch forwards CDP frames
+ received from neighbor devices. If at least one port has CDP awareness
+ enabled all CDP frames are terminated by the switch.
+
+
+
+ Note: When CDP awareness on a port is disabled the CDP information
+ isn't removed immediately, but gets removed when the hold time is
+ exceeded."
+ ::= { tnLldpConfigEntry 4 }
+
+tnLldpConfigOptionalTlvs OBJECT-TYPE
+ SYNTAX TNUnsigned8
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables/Disables the LLDP optional TLVs. Bit mask, where setting the
+ bit to 1 means enable transmission of the corresponding TLV.
+
+ Bit 0 represents Port Description TLV.
+
+ Bit 1 represents System Name TLV.
+
+ Bit 2 represents System Description.
+
+ Bit 3 represents System Capabilities TLV.
+
+ Bit 4 represents Management Address TLV."
+ ::= { tnLldpConfigEntry 5 }
+
+tnLldpConfigMed OBJECT IDENTIFIER
+ ::= { tnLldpConfig 3 }
+
+tnLldpConfigMedTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpConfigMedEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to configure LLDP MEDIA configurations for a specific
+ interface."
+ ::= { tnLldpConfigMed 1 }
+
+tnLldpConfigMedEntry OBJECT-TYPE
+ SYNTAX TNLldpConfigMedEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of control parameters"
+ INDEX { tnLldpConfigMedIfIndex }
+ ::= { tnLldpConfigMedTable 1 }
+
+TNLldpConfigMedEntry ::= SEQUENCE {
+ tnLldpConfigMedIfIndex TNInterfaceIndex,
+ tnLldpConfigMedOptionalTlvs TNUnsigned8,
+ tnLldpConfigMedDeviceType TNlldpmedDeviceType
+}
+
+tnLldpConfigMedIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpConfigMedEntry 1 }
+
+tnLldpConfigMedOptionalTlvs OBJECT-TYPE
+ SYNTAX TNUnsigned8
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables/Disables the LLDP optional TLVs. Bit mask, where setting the
+ bit to 1 means
+
+ enable transmission of the corresponding optional TLV.
+
+ Bit 0 represents the capabilities TLV.
+
+ Bit 1 represents the network Policy TLV.
+
+ Bit 2 represents the location TLV.
+
+ Bit 3 represents the PoE TLV."
+ ::= { tnLldpConfigMedEntry 3 }
+
+tnLldpConfigMedDeviceType OBJECT-TYPE
+ SYNTAX TNlldpmedDeviceType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting device type to configure the mode the device shall operate as."
+ ::= { tnLldpConfigMedEntry 4 }
+
+tnLldpConfigMedPolicyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpConfigMedPolicyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to configure LLDP MED Policies for the device."
+ ::= { tnLldpConfigMed 2 }
+
+tnLldpConfigMedPolicyEntry OBJECT-TYPE
+ SYNTAX TNLldpConfigMedPolicyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Network Policy Discovery enables the efficient discovery and diagnosis
+ of mismatch issues with the VLAN configuration, along with the
+ associated Layer 2 and Layer 3 attributes, which apply for a set of
+ specific protocol applications on that port. Improper network policy
+ configurations are a very significant issue in VoIP environments that
+ frequently result in voice quality degradation or loss of service.
+ Policies are only intended for use with applications that have specific
+ 'real-time' network policy requirements, such as interactive voice
+ and/or video services."
+ INDEX { tnLldpConfigMedPolicyLldpmedPolicy }
+ ::= { tnLldpConfigMedPolicyTable 1 }
+
+TNLldpConfigMedPolicyEntry ::= SEQUENCE {
+ tnLldpConfigMedPolicyLldpmedPolicy Integer32,
+ tnLldpConfigMedPolicyApplicationType TNlldpmedRemoteNetworkPolicyApplicationType,
+ tnLldpConfigMedPolicyTagged TruthValue,
+ tnLldpConfigMedPolicyVlanId TNUnsigned16,
+ tnLldpConfigMedPolicyL2Priority TNUnsigned8,
+ tnLldpConfigMedPolicyDscp TNUnsigned8,
+ tnLldpConfigMedPolicyAction TNRowEditorState
+}
+
+tnLldpConfigMedPolicyLldpmedPolicy OBJECT-TYPE
+ SYNTAX Integer32 (0..31)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Policy index."
+ ::= { tnLldpConfigMedPolicyEntry 1 }
+
+tnLldpConfigMedPolicyApplicationType OBJECT-TYPE
+ SYNTAX TNlldpmedRemoteNetworkPolicyApplicationType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy application type."
+ ::= { tnLldpConfigMedPolicyEntry 3 }
+
+tnLldpConfigMedPolicyTagged OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy tagged flag. Defines if LLDP policy uses tagged VLAN."
+ ::= { tnLldpConfigMedPolicyEntry 4 }
+
+tnLldpConfigMedPolicyVlanId OBJECT-TYPE
+ SYNTAX TNUnsigned16 (1..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy VLAN ID. Only valid when policy 'Tagged' is TRUE"
+ ::= { tnLldpConfigMedPolicyEntry 5 }
+
+tnLldpConfigMedPolicyL2Priority OBJECT-TYPE
+ SYNTAX TNUnsigned8 (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy L2 priority."
+ ::= { tnLldpConfigMedPolicyEntry 6 }
+
+tnLldpConfigMedPolicyDscp OBJECT-TYPE
+ SYNTAX TNUnsigned8 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy DSCP."
+ ::= { tnLldpConfigMedPolicyEntry 7 }
+
+tnLldpConfigMedPolicyAction OBJECT-TYPE
+ SYNTAX TNRowEditorState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Action"
+ ::= { tnLldpConfigMedPolicyEntry 100 }
+
+tnLldpConfigMedPolicyListTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpConfigMedPolicyListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface can be mapped to multiple policies. Set to TRUE in order
+ to enable the corresponding policy to be transmitted at the interface.
+ It is a requirement that the policy is defined."
+ ::= { tnLldpConfigMed 3 }
+
+tnLldpConfigMedPolicyListEntry OBJECT-TYPE
+ SYNTAX TNLldpConfigMedPolicyListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each location information has a control parameter"
+ INDEX { tnLldpConfigMedPolicyListIfIndex, tnLldpConfigMedPolicyListLldpmedPolicy }
+ ::= { tnLldpConfigMedPolicyListTable 1 }
+
+TNLldpConfigMedPolicyListEntry ::= SEQUENCE {
+ tnLldpConfigMedPolicyListIfIndex TNInterfaceIndex,
+ tnLldpConfigMedPolicyListLldpmedPolicy Integer32,
+ tnLldpConfigMedPolicyListLldpmedPoliciesList TruthValue
+}
+
+tnLldpConfigMedPolicyListIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpConfigMedPolicyListEntry 1 }
+
+tnLldpConfigMedPolicyListLldpmedPolicy OBJECT-TYPE
+ SYNTAX Integer32 (0..31)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Policy index."
+ ::= { tnLldpConfigMedPolicyListEntry 3 }
+
+tnLldpConfigMedPolicyListLldpmedPoliciesList OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set to TRUE assign the corresponding policy index to the interface."
+ ::= { tnLldpConfigMedPolicyListEntry 4 }
+
+tnLldpConfigMedGlobal OBJECT IDENTIFIER
+ ::= { tnLldpConfigMed 4 }
+
+tnLldpConfigMedGlobalFastRepeatCount OBJECT-TYPE
+ SYNTAX TNUnsigned8 (1..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Number of times to repeat LLDP frame transmission at fast start
+
+ Rapid startup and Emergency Call Service Location Identification
+ Discovery of endpoints is a critically important aspect of VoIP systems
+ in general. In addition, it is best to advertise only those pieces of
+ information which are specifically relevant to particular endpoint
+ types (for example only advertise the voice network policy to permitted
+ voice-capable devices), both in order to conserve the limited LLDPU
+ space and to reduce security and system integrity issues that can come
+ with inappropriate knowledge of the network policy.
+
+ With this in mind LLDP-MED defines an LLDP-MED Fast Start interaction
+ between the protocol and the application layers on top of the protocol,
+ in order to achieve these related properties. Initially, a Network
+ Connectivity Device will only transmit LLDP TLVs in an LLDPDU. Only
+ after an LLDP-MED Endpoint Device is detected, will an LLDP-MED capable
+ Network Connectivity Device start to advertise LLDP-MED TLVs in
+ outgoing LLDPDUs on the associated port. The LLDP-MED application will
+ temporarily speed up the transmission of the LLDPDU to start within a
+ second, when a new LLDP-MED neighbor has been detected in order share
+ LLDP-MED information as fast as possible to new neighbors.
+
+ Because there is a risk of an LLDP frame being lost during transmission
+ between neighbors, it is recommended to repeat the fast start
+ transmission multiple times to increase the possibility of the
+ neighbors receiving the LLDP frame. With fast start repeat count it is
+ possible to specify the number of times the fast start transmission
+ would be repeated. The recommended value is 4 times, given that 4 LLDP
+ frames with a 1 second interval will be transmitted, when an LLDP frame
+ with new information is received.
+
+ It should be noted that LLDP-MED and the LLDP-MED Fast Start mechanism
+ is only intended to run on links between LLDP-MED Network Connectivity
+ Devices and Endpoint Devices, and as such does not apply to links
+ between LAN infrastructure elements, including Network Connectivity
+ Devices, or other types of links."
+ ::= { tnLldpConfigMedGlobal 1 }
+
+tnLldpConfigMedGlobalLatitude OBJECT-TYPE
+ SYNTAX TNInteger64
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Latitude degrees in 2s-complement as specified in RFC 3825. Positive
+ numbers are north of the equator and negative numbers are south of the
+ equator."
+ ::= { tnLldpConfigMedGlobal 2 }
+
+tnLldpConfigMedGlobalLongitude OBJECT-TYPE
+ SYNTAX TNInteger64
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Longitude degrees in 2s-complement as specified in RFC 3825. Positive
+ values are East of the prime meridian and negative numbers are West of
+ the prime meridian."
+ ::= { tnLldpConfigMedGlobal 3 }
+
+tnLldpConfigMedGlobalAltitudeType OBJECT-TYPE
+ SYNTAX TNlldpmedAltitudeType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting altitude type
+
+ Possible to select between two altitude types (floors or meters).
+ Meters are representing meters of altitude defined by the vertical
+ datum specified. Floors are representing altitude in a form more
+ relevant in buildings which have different floor-to-floor dimensions.
+ An altitude = 0.0 is meaningful even outside a building, and represents
+ ground level at the given latitude and longitude. Inside a building,
+ 0.0 represents the floor level associated with ground level at the main
+ entrance."
+ ::= { tnLldpConfigMedGlobal 4 }
+
+tnLldpConfigMedGlobalAltitude OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Altitude value in 2s-complement as specified in RFC 3825"
+ ::= { tnLldpConfigMedGlobal 5 }
+
+tnLldpConfigMedGlobalElinAddr OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..25))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Emergency Call Service ELIN identifier data format is defined to carry
+ the ELIN identifier as used during emergency call setup to a
+ traditional CAMA or ISDN trunk-based PSAP. This format consists of a
+ numerical digit string, corresponding to the ELIN to be used for
+ emergency calling. Maximum number of octets are 25."
+ ::= { tnLldpConfigMedGlobal 6 }
+
+tnLldpConfigMedGlobalDatum OBJECT-TYPE
+ SYNTAX TNlldpmedDatumType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting datum to configure the datum (geodetic system) to use.
+
+ The Map Datum is used for the coordinates given in these options:
+
+ WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
+ Prime Meridian Name: Greenwich.
+
+ NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
+ Name: Greenwich;The associated vertical datum is the North American
+ Vertical Datum of 1988 (NAVD88).This datum pair is to be used when
+ referencing locations on land, not near tidal water(which would use
+ Datum = NAD83/MLLW).
+
+ NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
+ Name: Greenwich; The associated vertical datum is Mean Lower Low Water
+ (MLLW). This datum pair is to be used when referencing locations on
+ water/sea/ocean."
+ ::= { tnLldpConfigMedGlobal 7 }
+
+tnLldpConfigMedGlobalCountryCode OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..2))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The two-letter ISO 3166 country code in capital ASCII letters -
+ Example: DK, DE or US."
+ ::= { tnLldpConfigMedGlobal 8 }
+
+tnLldpConfigMedLocationInformationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpConfigMedLocationInformationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The civic address location information. Each civic address can contain
+ up to 250 characters, but the total amount of characters for the
+ combined civic address locations must not exceed 250 bytes. Note: If an
+ civic address location is non-empty it uses the amount of characters
+ plus addition two characters. This is described in TIA1057, Section
+ 10.2.4.3.2."
+ ::= { tnLldpConfigMed 5 }
+
+tnLldpConfigMedLocationInformationEntry OBJECT-TYPE
+ SYNTAX TNLldpConfigMedLocationInformationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each civic address type as defined in TIA1057, Section 3.4 in Annex B"
+ INDEX { tnLldpConfigMedLocationInformationLldpmedIndex }
+ ::= { tnLldpConfigMedLocationInformationTable 1 }
+
+TNLldpConfigMedLocationInformationEntry ::= SEQUENCE {
+ tnLldpConfigMedLocationInformationLldpmedIndex TNlldpmedCivicAddressType,
+ tnLldpConfigMedLocationInformationCivicAddress TNDisplayString
+}
+
+tnLldpConfigMedLocationInformationLldpmedIndex OBJECT-TYPE
+ SYNTAX TNlldpmedCivicAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Civic address type.
+
+ 1 - State/National subdivisions
+
+ 2 - County, parish, gun (JP), district (IN)
+
+ 3 - City, township
+
+ 4 - City division, borough, city district, ward, chou (JP)
+
+ 5 - Neighborhood, block
+
+ 6 - Street
+
+ 16 - Leading street direction
+
+ 17 - Trailing street direction
+
+ 18 - Street suffix
+
+ 19 - House number
+
+ 20 - House number suffix
+
+ 21 - Landmark or vanity address
+
+ 22 - Additional location information
+
+ 23 - Name
+
+ 24 - Postal/zip code
+
+ 25 - Building
+
+ 26 - Unit
+
+ 27 - Floor
+
+ 28 - Room
+
+ 29 - Place type
+
+ 30 - Postal
+
+ 31 - Post office
+
+ 32 - Additional code"
+ ::= { tnLldpConfigMedLocationInformationEntry 2 }
+
+tnLldpConfigMedLocationInformationCivicAddress OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Civic address"
+ ::= { tnLldpConfigMedLocationInformationEntry 3 }
+
+tnLldpConfigMedPolicyRowEditor OBJECT IDENTIFIER
+ ::= { tnLldpConfigMed 6 }
+
+tnLldpConfigMedPolicyRowEditorLldpmedPolicy OBJECT-TYPE
+ SYNTAX Integer32 (0..31)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Policy index."
+ ::= { tnLldpConfigMedPolicyRowEditor 1 }
+
+tnLldpConfigMedPolicyRowEditorApplicationType OBJECT-TYPE
+ SYNTAX TNlldpmedRemoteNetworkPolicyApplicationType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy application type."
+ ::= { tnLldpConfigMedPolicyRowEditor 3 }
+
+tnLldpConfigMedPolicyRowEditorTagged OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy tagged flag. Defines if LLDP policy uses tagged VLAN."
+ ::= { tnLldpConfigMedPolicyRowEditor 4 }
+
+tnLldpConfigMedPolicyRowEditorVlanId OBJECT-TYPE
+ SYNTAX TNUnsigned16 (1..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy VLAN ID. Only valid when policy 'Tagged' is TRUE"
+ ::= { tnLldpConfigMedPolicyRowEditor 5 }
+
+tnLldpConfigMedPolicyRowEditorL2Priority OBJECT-TYPE
+ SYNTAX TNUnsigned8 (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy L2 priority."
+ ::= { tnLldpConfigMedPolicyRowEditor 6 }
+
+tnLldpConfigMedPolicyRowEditorDscp OBJECT-TYPE
+ SYNTAX TNUnsigned8 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy DSCP."
+ ::= { tnLldpConfigMedPolicyRowEditor 7 }
+
+tnLldpConfigMedPolicyRowEditorAction OBJECT-TYPE
+ SYNTAX TNRowEditorState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Action"
+ ::= { tnLldpConfigMedPolicyRowEditor 100 }
+
+tnLldpStatus OBJECT IDENTIFIER
+ ::= { tnLldpMibObjects 3 }
+
+tnLldpStatusStatistics OBJECT IDENTIFIER
+ ::= { tnLldpStatus 1 }
+
+tnLldpStatusStatisticsGlobalCounters OBJECT IDENTIFIER
+ ::= { tnLldpStatusStatistics 1 }
+
+tnLldpStatusStatisticsGlobalCountersTableInserts OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of new entries added since switch reboot."
+ ::= { tnLldpStatusStatisticsGlobalCounters 1 }
+
+tnLldpStatusStatisticsGlobalCountersTableDeletes OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of new entries deleted since switch reboot."
+ ::= { tnLldpStatusStatisticsGlobalCounters 2 }
+
+tnLldpStatusStatisticsGlobalCountersTableDrops OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of LLDP frames dropped due to the entry table being
+ full."
+ ::= { tnLldpStatusStatisticsGlobalCounters 3 }
+
+tnLldpStatusStatisticsGlobalCountersTableAgeOuts OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of entries deleted due to Time-To-Live expiring."
+ ::= { tnLldpStatusStatisticsGlobalCounters 4 }
+
+tnLldpStatusStatisticsGlobalCountersLastChangeTime OBJECT-TYPE
+ SYNTAX TNUnsigned64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the time when the last entry was last deleted or added. It also
+ shows the time elapsed since the last change was detected."
+ ::= { tnLldpStatusStatisticsGlobalCounters 5 }
+
+tnLldpStatusStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpStatusStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table represents the LLDP interface counters"
+ ::= { tnLldpStatusStatistics 2 }
+
+tnLldpStatusStatisticsEntry OBJECT-TYPE
+ SYNTAX TNLldpStatusStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each port interface has a set of statistics counters"
+ INDEX { tnLldpStatusStatisticsIfIndex }
+ ::= { tnLldpStatusStatisticsTable 1 }
+
+TNLldpStatusStatisticsEntry ::= SEQUENCE {
+ tnLldpStatusStatisticsIfIndex TNInterfaceIndex,
+ tnLldpStatusStatisticsTxTotal Unsigned32,
+ tnLldpStatusStatisticsRxTotal Unsigned32,
+ tnLldpStatusStatisticsRxError Unsigned32,
+ tnLldpStatusStatisticsRxDiscarded Unsigned32,
+ tnLldpStatusStatisticsTLVsDiscarded Unsigned32,
+ tnLldpStatusStatisticsTLVsUnrecognized Unsigned32,
+ tnLldpStatusStatisticsTLVsOrgDiscarded Unsigned32,
+ tnLldpStatusStatisticsAgeOuts Unsigned32
+}
+
+tnLldpStatusStatisticsIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpStatusStatisticsEntry 1 }
+
+tnLldpStatusStatisticsTxTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of LLDP frames transmitted."
+ ::= { tnLldpStatusStatisticsEntry 2 }
+
+tnLldpStatusStatisticsRxTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of LLDP frames received."
+ ::= { tnLldpStatusStatisticsEntry 3 }
+
+tnLldpStatusStatisticsRxError OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of received LLDP frames containing some kind of error."
+ ::= { tnLldpStatusStatisticsEntry 4 }
+
+tnLldpStatusStatisticsRxDiscarded OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Show the number of LLDP frames discarded. If a LLDP frame is received
+ at an interface, and the switch's internal table has run full, the LLDP
+ frame is counted and discarded. This situation is known as 'Too Many
+ Neighbors' in the LLDP standard. LLDP frames require a new entry in the
+ table when the Chassis ID or Remote Port ID is not already contained
+ within the table. Entries are removed from the table when a given
+ interface's link is down, an LLDP shutdown frame is received, or when
+ the entry ages out."
+ ::= { tnLldpStatusStatisticsEntry 5 }
+
+tnLldpStatusStatisticsTLVsDiscarded OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of TLVs discarded. Each LLDP frame can contain
+ multiple pieces of information, known as TLVs (TLV is short for 'Type
+ Length Value'). If a TLV is malformed, it is counted and discarded."
+ ::= { tnLldpStatusStatisticsEntry 6 }
+
+tnLldpStatusStatisticsTLVsUnrecognized OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of well-formed TLVs, but with an unknown type value."
+ ::= { tnLldpStatusStatisticsEntry 7 }
+
+tnLldpStatusStatisticsTLVsOrgDiscarded OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the number of well-formed TLVs, but with an organizationally TLV
+ which is not supported."
+ ::= { tnLldpStatusStatisticsEntry 8 }
+
+tnLldpStatusStatisticsAgeOuts OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Show the number of age-outs. Each frame contains information about how
+ long time the LLDP information is valid (age-out time). If no new LLDP
+ frame is received within the age out time, the information is removed,
+ and the counter is incremented."
+ ::= { tnLldpStatusStatisticsEntry 9 }
+
+tnLldpStatusNeighborsInformationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpStatusNeighborsInformationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to show the LLDP neighbors information for a specific
+ interface."
+ ::= { tnLldpStatus 2 }
+
+tnLldpStatusNeighborsInformationEntry OBJECT-TYPE
+ SYNTAX TNLldpStatusNeighborsInformationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of neighbors information"
+ INDEX { tnLldpStatusNeighborsInformationIfIndex, tnLldpStatusNeighborsInformationLldpmedIndex }
+ ::= { tnLldpStatusNeighborsInformationTable 1 }
+
+TNLldpStatusNeighborsInformationEntry ::= SEQUENCE {
+ tnLldpStatusNeighborsInformationIfIndex TNInterfaceIndex,
+ tnLldpStatusNeighborsInformationLldpmedIndex Integer32,
+ tnLldpStatusNeighborsInformationChassisId TNDisplayString,
+ tnLldpStatusNeighborsInformationPortId TNDisplayString,
+ tnLldpStatusNeighborsInformationPortDescription TNDisplayString,
+ tnLldpStatusNeighborsInformationSystemName TNDisplayString,
+ tnLldpStatusNeighborsInformationSystemDescription TNDisplayString,
+ tnLldpStatusNeighborsInformationSystemCapabilities TNUnsigned16,
+ tnLldpStatusNeighborsInformationSystemCapabilitiesEnable TNUnsigned16
+}
+
+tnLldpStatusNeighborsInformationIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpStatusNeighborsInformationEntry 1 }
+
+tnLldpStatusNeighborsInformationLldpmedIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..192)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor information table entry index."
+ ::= { tnLldpStatusNeighborsInformationEntry 2 }
+
+tnLldpStatusNeighborsInformationChassisId OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..254))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's chassis Id."
+ ::= { tnLldpStatusNeighborsInformationEntry 4 }
+
+tnLldpStatusNeighborsInformationPortId OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..254))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's port id."
+ ::= { tnLldpStatusNeighborsInformationEntry 5 }
+
+tnLldpStatusNeighborsInformationPortDescription OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..254))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's port description."
+ ::= { tnLldpStatusNeighborsInformationEntry 6 }
+
+tnLldpStatusNeighborsInformationSystemName OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..254))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's system name."
+ ::= { tnLldpStatusNeighborsInformationEntry 7 }
+
+tnLldpStatusNeighborsInformationSystemDescription OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..254))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's system description."
+ ::= { tnLldpStatusNeighborsInformationEntry 8 }
+
+tnLldpStatusNeighborsInformationSystemCapabilities OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's system capabilities as bit mask.
+
+ If the bit is set, it means that the functionality is supported by the
+ neighbor system.
+
+ Bit 0 represents Other.
+
+ Bit 1 represents Repeater.
+
+ Bit 2 represents Bridge.
+
+ Bit 3 represents WLAN Access Point.
+
+ Bit 4 represents Router.
+
+ Bit 5 represents Telephone.
+
+ Bit 6 represents DOCSIS cable device.
+
+ Bit 7 represents Station Only.
+
+ Bit 8 represents Reserved."
+ ::= { tnLldpStatusNeighborsInformationEntry 9 }
+
+tnLldpStatusNeighborsInformationSystemCapabilitiesEnable OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's system capabilities which is enabled.
+
+ If the bit is set, it means that the functionality is currently enabled
+ at the neighbor system.
+
+ Bit 0 represents Other.
+
+ Bit 1 represents Repeater.
+
+ Bit 2 represents Bridge.
+
+ Bit 3 represents WLAN Access Point.
+
+ Bit 4 represents Router.
+
+ Bit 5 represents Telephone.
+
+ Bit 6 represents DOCSIS cable device.
+
+ Bit 7 represents Station Only.
+
+ Bit 8 represents Reserved."
+ ::= { tnLldpStatusNeighborsInformationEntry 10 }
+
+tnLldpStatusNeighborsMgmtInformationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpStatusNeighborsMgmtInformationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to show the LLDP neighbors information for a specific
+ interface."
+ ::= { tnLldpStatus 3 }
+
+tnLldpStatusNeighborsMgmtInformationEntry OBJECT-TYPE
+ SYNTAX TNLldpStatusNeighborsMgmtInformationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of neighbors information"
+ INDEX { tnLldpStatusNeighborsMgmtInformationIfIndex, tnLldpStatusNeighborsMgmtInformationLldpmedIndex, tnLldpStatusNeighborsMgmtInformationLldpManagement }
+ ::= { tnLldpStatusNeighborsMgmtInformationTable 1 }
+
+TNLldpStatusNeighborsMgmtInformationEntry ::= SEQUENCE {
+ tnLldpStatusNeighborsMgmtInformationIfIndex TNInterfaceIndex,
+ tnLldpStatusNeighborsMgmtInformationLldpmedIndex Integer32,
+ tnLldpStatusNeighborsMgmtInformationLldpManagement Integer32,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmAddressSubtype TNUnsigned8,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtAddress TNDisplayString,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtInterfaceSubtype Integer32,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtInterface Integer32,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtOid OBJECT IDENTIFIER
+}
+
+tnLldpStatusNeighborsMgmtInformationIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 1 }
+
+tnLldpStatusNeighborsMgmtInformationLldpmedIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..192)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor information table entry index."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 2 }
+
+tnLldpStatusNeighborsMgmtInformationLldpManagement OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor management information table entry index."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 4 }
+
+tnLldpStatusNeighborsMgmtInformationSystemMgmAddressSubtype OBJECT-TYPE
+ SYNTAX TNUnsigned8
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LLDP neighbor's management address subtype , section 9.5.9.3
+ IEEE802.1AB-2005."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 5 }
+
+tnLldpStatusNeighborsMgmtInformationSystemMgmtAddress OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LLDP neighbor's management address string, section 9.5.9.4
+ IEEE802.1AB-2005."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 6 }
+
+tnLldpStatusNeighborsMgmtInformationSystemMgmtInterfaceSubtype OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interface numbering subtype, section 9.5.9.5 IEEE802.1AB-2005."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 7 }
+
+tnLldpStatusNeighborsMgmtInformationSystemMgmtInterface OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interface number, section 9.5.9.6 IEEE802.1AB-2005."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 8 }
+
+tnLldpStatusNeighborsMgmtInformationSystemMgmtOid OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Object identifier, section 9.5.9.8 IEEE802.1AB-2005."
+ ::= { tnLldpStatusNeighborsMgmtInformationEntry 9 }
+
+tnLldpStatusMed OBJECT IDENTIFIER
+ ::= { tnLldpStatus 4 }
+
+tnLldpStatusMedRemoteDeviceInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpStatusMedRemoteDeviceInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to show the LLDP neighbors information for a specific
+ interface."
+ ::= { tnLldpStatusMed 1 }
+
+tnLldpStatusMedRemoteDeviceInfoEntry OBJECT-TYPE
+ SYNTAX TNLldpStatusMedRemoteDeviceInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of neighbors information"
+ INDEX { tnLldpStatusMedRemoteDeviceInfoIfIndex, tnLldpStatusMedRemoteDeviceInfoLldpmedIndex }
+ ::= { tnLldpStatusMedRemoteDeviceInfoTable 1 }
+
+TNLldpStatusMedRemoteDeviceInfoEntry ::= SEQUENCE {
+ tnLldpStatusMedRemoteDeviceInfoIfIndex TNInterfaceIndex,
+ tnLldpStatusMedRemoteDeviceInfoLldpmedIndex Integer32,
+ tnLldpStatusMedRemoteDeviceInfoCapabilities TNUnsigned16,
+ tnLldpStatusMedRemoteDeviceInfoCapabilitiesEnabled TNUnsigned16,
+ tnLldpStatusMedRemoteDeviceInfoLatitude TNInteger64,
+ tnLldpStatusMedRemoteDeviceInfoLongitude TNInteger64,
+ tnLldpStatusMedRemoteDeviceInfoAltitudeType TNlldpmedAltitudeType,
+ tnLldpStatusMedRemoteDeviceInfoAltitude Integer32,
+ tnLldpStatusMedRemoteDeviceInfoDatum TNlldpmedDatumType,
+ tnLldpStatusMedRemoteDeviceInfoElinaddr TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoDeviceType TNlldpmedRemoteDeviceType,
+ tnLldpStatusMedRemoteDeviceInfoHwRev TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoFwRev TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoSwRev TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoSerialNo TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoManufacturerName TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoModelName TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoAssetId TNDisplayString,
+ tnLldpStatusMedRemoteDeviceInfoEeeRxTwSys TNUnsigned16,
+ tnLldpStatusMedRemoteDeviceInfoEeeTxTwSys TNUnsigned16,
+ tnLldpStatusMedRemoteDeviceInfoEeeFbTwSys TNUnsigned16,
+ tnLldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho TNUnsigned16,
+ tnLldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho TNUnsigned16
+}
+
+tnLldpStatusMedRemoteDeviceInfoIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 1 }
+
+tnLldpStatusMedRemoteDeviceInfoLldpmedIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..192)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor information table entry index."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 2 }
+
+tnLldpStatusMedRemoteDeviceInfoCapabilities OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LLDP neighbor's capabilities bit mask.
+
+ Bit 0 represents LLDP-MED capabilities.
+
+ Bit 1 represents Network Policy.
+
+ Bit 2 represents Location Identification.
+
+ Bit 3 represents Extended Power via MDI - PSE.
+
+ Bit 4 represents Extended Power via MDI - PD
+
+ Bit 5 represents Inventory
+
+ "
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 4 }
+
+tnLldpStatusMedRemoteDeviceInfoCapabilitiesEnabled OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LLDP neighbor's capabilities bit mask for the capabilities which are
+ currently enabled.
+
+ Bit 0 represents LLDP-MED capabilities.
+
+ Bit 1 represents Network Policy.
+
+ Bit 2 represents Location Identification.
+
+ Bit 3 represents Extended Power via MDI - PSE.
+
+ Bit 4 represents Extended Power via MDI - PD
+
+ Bit 5 represents Inventory
+
+ "
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 5 }
+
+tnLldpStatusMedRemoteDeviceInfoLatitude OBJECT-TYPE
+ SYNTAX TNInteger64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Latitude degrees in 2s-complement as specified in RFC 3825. Positive
+ numbers are north of the equator and negative numbers are south of the
+ equator."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 6 }
+
+tnLldpStatusMedRemoteDeviceInfoLongitude OBJECT-TYPE
+ SYNTAX TNInteger64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Longitude degrees in 2s-complement as specified in RFC 3825. Positive
+ values are East of the prime meridian and negative numbers are West of
+ the prime meridian."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 7 }
+
+tnLldpStatusMedRemoteDeviceInfoAltitudeType OBJECT-TYPE
+ SYNTAX TNlldpmedAltitudeType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Altitude type as either floors or meters. Meters are representing
+ meters of altitude defined by the vertical datum specified. Floors are
+ representing altitude in a form more relevant in buildings which have
+ different floor-to-floor dimensions. An altitude = 0.0 is meaningful
+ even outside a building, and represents ground level at the given
+ latitude and longitude. Inside a building, 0.0 represents the floor
+ level associated with ground level at the main entrance."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 8 }
+
+tnLldpStatusMedRemoteDeviceInfoAltitude OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Altitude value in 2s-complement as specified in RFC 3825"
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 9 }
+
+tnLldpStatusMedRemoteDeviceInfoDatum OBJECT-TYPE
+ SYNTAX TNlldpmedDatumType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Datum (geodetic system) .
+
+ The Map Datum is used for the coordinates given in these options:
+
+ WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
+ Prime Meridian Name: Greenwich.
+
+ NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
+ Name: Greenwich; The associated vertical datum is the North American
+ Vertical Datum of 1988 (NAVD88). This datum pair is to be used when
+ referencing locations on land, not near tidal water(which would use
+ Datum = NAD83/MLLW).
+
+ NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
+ Name: Greenwich; The associated vertical datum is Mean Lower Low Water
+ (MLLW). This datum pair is to be used when referencing locations on
+ water/sea/ocean."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 10 }
+
+tnLldpStatusMedRemoteDeviceInfoElinaddr OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..25))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Emergency Call Service ELIN identifier data format is defined to carry
+ the ELIN identifier as used during emergency call setup to a
+ traditional CAMA or ISDN trunk-based PSAP. This format consists of a
+ numerical digit string, corresponding to the ELIN to be used for
+ emergency calling. Maximum number of octets are 25."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 11 }
+
+tnLldpStatusMedRemoteDeviceInfoDeviceType OBJECT-TYPE
+ SYNTAX TNlldpmedRemoteDeviceType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's device type."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 12 }
+
+tnLldpStatusMedRemoteDeviceInfoHwRev OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's hardware revision."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 13 }
+
+tnLldpStatusMedRemoteDeviceInfoFwRev OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's firmware revision."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 14 }
+
+tnLldpStatusMedRemoteDeviceInfoSwRev OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's software revision."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 15 }
+
+tnLldpStatusMedRemoteDeviceInfoSerialNo OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's serial number."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 16 }
+
+tnLldpStatusMedRemoteDeviceInfoManufacturerName OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's manufacturer name."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 17 }
+
+tnLldpStatusMedRemoteDeviceInfoModelName OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's model name."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 18 }
+
+tnLldpStatusMedRemoteDeviceInfoAssetId OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's asset id."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 19 }
+
+tnLldpStatusMedRemoteDeviceInfoEeeRxTwSys OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
+ the time (expressed in microseconds) that the transmitting link partner
+ will wait before it starts transmitting data after leaving the Low
+ Power Idle (LPI) mode. Section 79.3.5.2, IEEE802.3az."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 20 }
+
+tnLldpStatusMedRemoteDeviceInfoEeeTxTwSys OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
+ the time (expressed in microseconds) that the receiving link partner is
+ requesting the transmitting link partner to wait before starting the
+ transmission data following the Low Power Idle (LPI) mode. Section
+ 79.3.5.1, IEEE802.3az."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 21 }
+
+tnLldpStatusMedRemoteDeviceInfoEeeFbTwSys OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
+ may inform the transmitter of an alternate desired Tw_sys_tx. Since a
+ receiving link partner is likely to have discrete levels for savings,
+ this provides the transmitter with additional information that it may
+ use for a more efficient allocation. Section 79.3.5.3, IEEE802.3az."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 22 }
+
+tnLldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's echo transmit Tw. The respective echo values
+ shall be defined as the local link partners reflection (echo) of the
+ remote link partners respective values. When a local link partner
+ receives its echoed values from the remote link partner it can
+ determine whether or not the remote link partner has received,
+ registered, and processed its most recent values. Section 79.3.5.4,
+ IEEE802.3az."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 23 }
+
+tnLldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho OBJECT-TYPE
+ SYNTAX TNUnsigned16
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's echo receive Tw. The respective echo values
+ shall be defined as the local link partners reflection (echo) of the
+ remote link partners respective values. When a local link partner
+ receives its echoed values from the remote link partner it can
+ determine whether or not the remote link partner has received,
+ registered, and processed its most recent values. Section 79.3.5.4,
+ IEEE802.3az."
+ ::= { tnLldpStatusMedRemoteDeviceInfoEntry 24 }
+
+tnLldpStatusMedRemoteDeviceLocInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpStatusMedRemoteDeviceLocInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to show the LLDP-MED remote device (neighbor) civic
+ location information for a specific interface."
+ ::= { tnLldpStatusMed 2 }
+
+tnLldpStatusMedRemoteDeviceLocInfoEntry OBJECT-TYPE
+ SYNTAX TNLldpStatusMedRemoteDeviceLocInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of neighbors information"
+ INDEX { tnLldpStatusMedRemoteDeviceLocInfoIfIndex, tnLldpStatusMedRemoteDeviceLocInfoLldpmedIndex }
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoTable 1 }
+
+TNLldpStatusMedRemoteDeviceLocInfoEntry ::= SEQUENCE {
+ tnLldpStatusMedRemoteDeviceLocInfoIfIndex TNInterfaceIndex,
+ tnLldpStatusMedRemoteDeviceLocInfoLldpmedIndex Integer32,
+ tnLldpStatusMedRemoteDeviceLocInfoState TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoCounty TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoCity TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoDistrict TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoBlock TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoStreet TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoLeadingStreetDirection TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoTrailingStreetSuffix TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoStreetSuffix TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoHouseNo TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoHouseNoSuffix TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoLandmark TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoAdditionalInfo TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoName TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoZipCode TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoBuilding TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoApartment TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoFloor TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoRoomNumber TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoPlaceType TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoPostalCommunityName TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoPoBox TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoAdditionalCode TNDisplayString,
+ tnLldpStatusMedRemoteDeviceLocInfoCountryCode TNDisplayString
+}
+
+tnLldpStatusMedRemoteDeviceLocInfoIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 1 }
+
+tnLldpStatusMedRemoteDeviceLocInfoLldpmedIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..192)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor information table entry index."
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 2 }
+
+tnLldpStatusMedRemoteDeviceLocInfoState OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "National subdivision"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 5 }
+
+tnLldpStatusMedRemoteDeviceLocInfoCounty OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "County"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 6 }
+
+tnLldpStatusMedRemoteDeviceLocInfoCity OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "City"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 7 }
+
+tnLldpStatusMedRemoteDeviceLocInfoDistrict OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "City district"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 8 }
+
+tnLldpStatusMedRemoteDeviceLocInfoBlock OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Block (Neighborhood)"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 9 }
+
+tnLldpStatusMedRemoteDeviceLocInfoStreet OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Street"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 10 }
+
+tnLldpStatusMedRemoteDeviceLocInfoLeadingStreetDirection OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Street Direction"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 11 }
+
+tnLldpStatusMedRemoteDeviceLocInfoTrailingStreetSuffix OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Trailing Street Suffix"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 12 }
+
+tnLldpStatusMedRemoteDeviceLocInfoStreetSuffix OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Street Suffix"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 13 }
+
+tnLldpStatusMedRemoteDeviceLocInfoHouseNo OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "House No."
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 14 }
+
+tnLldpStatusMedRemoteDeviceLocInfoHouseNoSuffix OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "House No. Suffix"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 15 }
+
+tnLldpStatusMedRemoteDeviceLocInfoLandmark OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Landmark"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 16 }
+
+tnLldpStatusMedRemoteDeviceLocInfoAdditionalInfo OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Additional Location Info"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 17 }
+
+tnLldpStatusMedRemoteDeviceLocInfoName OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 18 }
+
+tnLldpStatusMedRemoteDeviceLocInfoZipCode OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Zip code"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 19 }
+
+tnLldpStatusMedRemoteDeviceLocInfoBuilding OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Building"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 20 }
+
+tnLldpStatusMedRemoteDeviceLocInfoApartment OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Apartment/unit"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 21 }
+
+tnLldpStatusMedRemoteDeviceLocInfoFloor OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Floor"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 22 }
+
+tnLldpStatusMedRemoteDeviceLocInfoRoomNumber OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Room Number"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 23 }
+
+tnLldpStatusMedRemoteDeviceLocInfoPlaceType OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Place type"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 24 }
+
+tnLldpStatusMedRemoteDeviceLocInfoPostalCommunityName OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Postal Community Name"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 25 }
+
+tnLldpStatusMedRemoteDeviceLocInfoPoBox OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Post Office Box"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 26 }
+
+tnLldpStatusMedRemoteDeviceLocInfoAdditionalCode OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..250))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Addination Code"
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 27 }
+
+tnLldpStatusMedRemoteDeviceLocInfoCountryCode OBJECT-TYPE
+ SYNTAX TNDisplayString (SIZE(0..2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The two-letter ISO 3166 country code in capital ASCII letters -
+ Example: DK, DE or US."
+ ::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 28 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to show the LLDP-MED remote device (neighbor) network
+ policies information for a specific interface."
+ ::= { tnLldpStatusMed 3 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry OBJECT-TYPE
+ SYNTAX TNLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of neighbors information"
+ INDEX { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex, tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex, tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy }
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTable 1 }
+
+TNLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry ::= SEQUENCE {
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex TNInterfaceIndex,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex Integer32,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy Integer32,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoApplicationType TNlldpmedRemoteNetworkPolicyApplicationType,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoUnknownPolicy TruthValue,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTagged TruthValue,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoVlanId TNUnsigned16,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoL2Priority TNUnsigned8,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoDscp TNUnsigned8
+}
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 1 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..192)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor information table entry index."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 2 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy OBJECT-TYPE
+ SYNTAX Integer32 (0..31)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Policy index."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 3 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoApplicationType OBJECT-TYPE
+ SYNTAX TNlldpmedRemoteNetworkPolicyApplicationType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LLDP policy application type."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 5 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoUnknownPolicy OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Policy indicates that an Endpoint Device wants to explicitly advertise
+ that the policy is required by the device. Can be either Defined or
+ Unknown
+
+ Unknown: The network policy for the specified application type is
+ currently unknown.
+
+ Defined: The network policy is defined (known)."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 6 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTagged OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines if LLDP policy uses tagged VLAN."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 7 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoVlanId OBJECT-TYPE
+ SYNTAX TNUnsigned16 (1..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The policy VLAN ID. Only valid when policy 'Tagged' is TRUE"
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 8 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoL2Priority OBJECT-TYPE
+ SYNTAX TNUnsigned8 (0..7)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Shows the LLDP neighbor's policy L2 priority."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 9 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoDscp OBJECT-TYPE
+ SYNTAX TNUnsigned8 (0..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LLDP policy DSCP."
+ ::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 10 }
+
+tnLldpControl OBJECT IDENTIFIER
+ ::= { tnLldpMibObjects 4 }
+
+tnLldpControlStatisticsClear OBJECT IDENTIFIER
+ ::= { tnLldpControl 1 }
+
+tnLldpControlStatisticsClearTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TNLldpControlStatisticsClearEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to clear LLDP statistics for a specific interface."
+ ::= { tnLldpControlStatisticsClear 1 }
+
+tnLldpControlStatisticsClearEntry OBJECT-TYPE
+ SYNTAX TNLldpControlStatisticsClearEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each interface has a set of statistics counters"
+ INDEX { tnLldpControlStatisticsClearIfIndex }
+ ::= { tnLldpControlStatisticsClearTable 1 }
+
+TNLldpControlStatisticsClearEntry ::= SEQUENCE {
+ tnLldpControlStatisticsClearIfIndex TNInterfaceIndex,
+ tnLldpControlStatisticsClearStatisticsClear TruthValue
+}
+
+tnLldpControlStatisticsClearIfIndex OBJECT-TYPE
+ SYNTAX TNInterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Logical interface number index."
+ ::= { tnLldpControlStatisticsClearEntry 1 }
+
+tnLldpControlStatisticsClearStatisticsClear OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set to TRUE to clear the LLDP statistics of an interface."
+ ::= { tnLldpControlStatisticsClearEntry 2 }
+
+tnLldpControlStatisticsClearGlobal OBJECT IDENTIFIER
+ ::= { tnLldpControlStatisticsClear 2 }
+
+tnLldpControlStatisticsClearGlobalClear OBJECT-TYPE
+ SYNTAX TNUnsigned8
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Clear LLDP global counters."
+ ::= { tnLldpControlStatisticsClearGlobal 1 }
+
+tnLldpMibConformance OBJECT IDENTIFIER
+ ::= { tnLldpMib 2 }
+
+tnLldpMibCompliances OBJECT IDENTIFIER
+ ::= { tnLldpMibConformance 1 }
+
+tnLldpMibGroups OBJECT IDENTIFIER
+ ::= { tnLldpMibConformance 2 }
+
+tnLldpConfigGlobalInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigGlobalReInitDelay, tnLldpConfigGlobalMsgTxHold,
+ tnLldpConfigGlobalMsgTxInterval, tnLldpConfigGlobalTxDelay }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 1 }
+
+tnLldpConfigInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigAdminState, tnLldpConfigCdpAware,
+ tnLldpConfigOptionalTlvs }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 2 }
+
+tnLldpConfigMedInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigMedOptionalTlvs, tnLldpConfigMedDeviceType }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 3 }
+
+tnLldpConfigMedPolicyInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigMedPolicyApplicationType,
+ tnLldpConfigMedPolicyTagged, tnLldpConfigMedPolicyVlanId,
+ tnLldpConfigMedPolicyL2Priority, tnLldpConfigMedPolicyDscp,
+ tnLldpConfigMedPolicyAction }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 4 }
+
+tnLldpConfigMedPolicyListInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigMedPolicyListLldpmedPoliciesList }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 5 }
+
+tnLldpConfigMedGlobalInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigMedGlobalFastRepeatCount,
+ tnLldpConfigMedGlobalLatitude,
+ tnLldpConfigMedGlobalLongitude,
+ tnLldpConfigMedGlobalAltitudeType,
+ tnLldpConfigMedGlobalAltitude,
+ tnLldpConfigMedGlobalElinAddr, tnLldpConfigMedGlobalDatum,
+ tnLldpConfigMedGlobalCountryCode }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 6 }
+
+tnLldpConfigMedLocationInformationInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigMedLocationInformationCivicAddress }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 7 }
+
+tnLldpConfigMedPolicyRowEditorInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpConfigMedPolicyRowEditorLldpmedPolicy,
+ tnLldpConfigMedPolicyRowEditorApplicationType,
+ tnLldpConfigMedPolicyRowEditorTagged,
+ tnLldpConfigMedPolicyRowEditorVlanId,
+ tnLldpConfigMedPolicyRowEditorL2Priority,
+ tnLldpConfigMedPolicyRowEditorDscp,
+ tnLldpConfigMedPolicyRowEditorAction }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 8 }
+
+tnLldpStatusStatisticsGlobalCountersInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpStatusStatisticsGlobalCountersTableInserts,
+ tnLldpStatusStatisticsGlobalCountersTableDeletes,
+ tnLldpStatusStatisticsGlobalCountersTableDrops,
+ tnLldpStatusStatisticsGlobalCountersTableAgeOuts,
+ tnLldpStatusStatisticsGlobalCountersLastChangeTime }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 9 }
+
+tnLldpStatusStatisticsTableInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpStatusStatisticsTxTotal,
+ tnLldpStatusStatisticsRxTotal,
+ tnLldpStatusStatisticsRxError,
+ tnLldpStatusStatisticsRxDiscarded,
+ tnLldpStatusStatisticsTLVsDiscarded,
+ tnLldpStatusStatisticsTLVsUnrecognized,
+ tnLldpStatusStatisticsTLVsOrgDiscarded,
+ tnLldpStatusStatisticsAgeOuts }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 10 }
+
+tnLldpStatusNeighborsInformationInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpStatusNeighborsInformationChassisId,
+ tnLldpStatusNeighborsInformationPortId,
+ tnLldpStatusNeighborsInformationPortDescription,
+ tnLldpStatusNeighborsInformationSystemName,
+ tnLldpStatusNeighborsInformationSystemDescription,
+ tnLldpStatusNeighborsInformationSystemCapabilities,
+ tnLldpStatusNeighborsInformationSystemCapabilitiesEnable }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 11 }
+
+tnLldpStatusNeighborsMgmtInformationInfoGroup OBJECT-GROUP
+ OBJECTS {
+ tnLldpStatusNeighborsMgmtInformationSystemMgmAddressSubtype,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtAddress,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtInterfaceSubtype,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtInterface,
+ tnLldpStatusNeighborsMgmtInformationSystemMgmtOid }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 12 }
+
+tnLldpStatusMedRemoteDeviceInfoInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpStatusMedRemoteDeviceInfoCapabilities,
+ tnLldpStatusMedRemoteDeviceInfoCapabilitiesEnabled,
+ tnLldpStatusMedRemoteDeviceInfoLatitude,
+ tnLldpStatusMedRemoteDeviceInfoLongitude,
+ tnLldpStatusMedRemoteDeviceInfoAltitudeType,
+ tnLldpStatusMedRemoteDeviceInfoAltitude,
+ tnLldpStatusMedRemoteDeviceInfoDatum,
+ tnLldpStatusMedRemoteDeviceInfoElinaddr,
+ tnLldpStatusMedRemoteDeviceInfoDeviceType,
+ tnLldpStatusMedRemoteDeviceInfoHwRev,
+ tnLldpStatusMedRemoteDeviceInfoFwRev,
+ tnLldpStatusMedRemoteDeviceInfoSwRev,
+ tnLldpStatusMedRemoteDeviceInfoSerialNo,
+ tnLldpStatusMedRemoteDeviceInfoManufacturerName,
+ tnLldpStatusMedRemoteDeviceInfoModelName,
+ tnLldpStatusMedRemoteDeviceInfoAssetId,
+ tnLldpStatusMedRemoteDeviceInfoEeeRxTwSys,
+ tnLldpStatusMedRemoteDeviceInfoEeeTxTwSys,
+ tnLldpStatusMedRemoteDeviceInfoEeeFbTwSys,
+ tnLldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho,
+ tnLldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 13 }
+
+tnLldpStatusMedRemoteDeviceLocInfoInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpStatusMedRemoteDeviceLocInfoState,
+ tnLldpStatusMedRemoteDeviceLocInfoCounty,
+ tnLldpStatusMedRemoteDeviceLocInfoCity,
+ tnLldpStatusMedRemoteDeviceLocInfoDistrict,
+ tnLldpStatusMedRemoteDeviceLocInfoBlock,
+ tnLldpStatusMedRemoteDeviceLocInfoStreet,
+ tnLldpStatusMedRemoteDeviceLocInfoLeadingStreetDirection,
+ tnLldpStatusMedRemoteDeviceLocInfoTrailingStreetSuffix,
+ tnLldpStatusMedRemoteDeviceLocInfoStreetSuffix,
+ tnLldpStatusMedRemoteDeviceLocInfoHouseNo,
+ tnLldpStatusMedRemoteDeviceLocInfoHouseNoSuffix,
+ tnLldpStatusMedRemoteDeviceLocInfoLandmark,
+ tnLldpStatusMedRemoteDeviceLocInfoAdditionalInfo,
+ tnLldpStatusMedRemoteDeviceLocInfoName,
+ tnLldpStatusMedRemoteDeviceLocInfoZipCode,
+ tnLldpStatusMedRemoteDeviceLocInfoBuilding,
+ tnLldpStatusMedRemoteDeviceLocInfoApartment,
+ tnLldpStatusMedRemoteDeviceLocInfoFloor,
+ tnLldpStatusMedRemoteDeviceLocInfoRoomNumber,
+ tnLldpStatusMedRemoteDeviceLocInfoPlaceType,
+ tnLldpStatusMedRemoteDeviceLocInfoPostalCommunityName,
+ tnLldpStatusMedRemoteDeviceLocInfoPoBox,
+ tnLldpStatusMedRemoteDeviceLocInfoAdditionalCode,
+ tnLldpStatusMedRemoteDeviceLocInfoCountryCode }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 14 }
+
+tnLldpStatusMedRemoteDeviceNetworkPolicyInfoInfoGroup OBJECT-GROUP
+ OBJECTS {
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoApplicationType,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoUnknownPolicy,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTagged,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoVlanId,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoL2Priority,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoDscp }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 15 }
+
+tnLldpControlStatisticsClearTableInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpControlStatisticsClearStatisticsClear }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 16 }
+
+tnLldpControlStatisticsClearGlobalInfoGroup OBJECT-GROUP
+ OBJECTS { tnLldpControlStatisticsClearGlobalClear }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects suitable for bulk operations."
+ ::= { tnLldpMibGroups 17 }
+
+tnLldpMibCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the implementation."
+
+ MODULE -- this module
+
+ MANDATORY-GROUPS { tnLldpConfigGlobalInfoGroup,
+ tnLldpConfigInfoGroup, tnLldpConfigMedInfoGroup,
+ tnLldpConfigMedPolicyInfoGroup,
+ tnLldpConfigMedPolicyListInfoGroup,
+ tnLldpConfigMedGlobalInfoGroup,
+ tnLldpConfigMedLocationInformationInfoGroup,
+ tnLldpConfigMedPolicyRowEditorInfoGroup,
+ tnLldpStatusStatisticsGlobalCountersInfoGroup,
+ tnLldpStatusStatisticsTableInfoGroup,
+ tnLldpStatusNeighborsInformationInfoGroup,
+ tnLldpStatusNeighborsMgmtInformationInfoGroup,
+ tnLldpStatusMedRemoteDeviceInfoInfoGroup,
+ tnLldpStatusMedRemoteDeviceLocInfoInfoGroup,
+ tnLldpStatusMedRemoteDeviceNetworkPolicyInfoInfoGroup,
+ tnLldpControlStatisticsClearTableInfoGroup,
+ tnLldpControlStatisticsClearGlobalInfoGroup }
+
+ ::= { tnLldpMibCompliances 1 }
+
+END
|