diff options
Diffstat (limited to 'MIBS/transition/TN-LOOP-PROTECT-MIB')
| -rw-r--r-- | MIBS/transition/TN-LOOP-PROTECT-MIB | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/MIBS/transition/TN-LOOP-PROTECT-MIB b/MIBS/transition/TN-LOOP-PROTECT-MIB new file mode 100644 index 0000000..c4c0974 --- /dev/null +++ b/MIBS/transition/TN-LOOP-PROTECT-MIB @@ -0,0 +1,187 @@ +-- ***************************************************************** +-- TN-LOOP-PROTECT-MIB.my : TN Loop Protection MIB +-- +-- Copyright (c) 2012 by Transition Networks, Inc. +-- All rights reserved. +-- +-- ***************************************************************** + +TN-LOOP-PROTECT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP FROM SNMPv2-CONF + entPhysicalIndex FROM ENTITY-MIB + ifIndex FROM IF-MIB + TruthValue, TimeStamp, DateAndTime, DisplayString + FROM SNMPv2-TC + tnProducts FROM TRANSITION-SMI; + +tnLoopProtectMIB MODULE-IDENTITY + LAST-UPDATED "201207251030Z" + ORGANIZATION "Transition Networks, Inc." + CONTACT-INFO + "Transition Networks + Technical Support + + 10900 Red Circle Drive + Minnetonka, MN 55343 USA + Tel: +1-800-526-9267 + + E-mail: techsupport@transition.com" + DESCRIPTION + "The mib module for managing all transition products with Loop protection" + REVISION "201207251030Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { tnProducts 22 } + +tnLoopProtectNotifications OBJECT IDENTIFIER ::= { tnLoopProtectMIB 0 } +tnLoopProtectObjects OBJECT IDENTIFIER ::= { tnLoopProtectMIB 1 } + +tnLoopProtectLoopDetectedNotification NOTIFICATION-TYPE + OBJECTS { ifIndex, + tnLoopProtectPortLoopCount, + tnLoopProtectPortAction} + STATUS current + DESCRIPTION + "A tnLoopProtectLoopDetectedNotification signifies + that a loop has been detected by the loop protection protocol. + Additional infomation contains port number ,count of loop detected on the port + and the action will be execute" + ::= { tnLoopProtectNotifications 1 } + +tnLoopProtectMgmt OBJECT IDENTIFIER ::= { tnLoopProtectObjects 1 } + +tnLoopProtectBaseTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnLoopProtectBaseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used for configuring global loop protect variables" + ::= { tnLoopProtectMgmt 1 } + +tnLoopProtectBaseEntry OBJECT-TYPE + SYNTAX TnLoopProtectBaseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry contains configuration elements of tnLoopProtectBaseTable" + INDEX { entPhysicalIndex } + ::= { tnLoopProtectBaseTable 1 } + +TnLoopProtectBaseEntry ::= SEQUENCE { + tnLoopProtectEnable TruthValue, + tnLoopProtectTxTime INTEGER, + tnLoopProtectShutdownTime INTEGER + } + +tnLoopProtectEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether the loop protect is enable on this device." + ::= { tnLoopProtectBaseEntry 1 } + +tnLoopProtectTxTime OBJECT-TYPE + SYNTAX INTEGER (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The interval in seconds between each loop protection PDU sent on each port. + valid values are 1 to 10 seconds,the default value is 5 seconds." + ::= { tnLoopProtectBaseEntry 2 } + +tnLoopProtectShutdownTime OBJECT-TYPE + SYNTAX INTEGER (0..604800) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The period (in seconds) for which a port will be kept disabled in the event of a loop is detected (and the port action shuts down the port). + Valid values are 0 to 604800 seconds (7 days). A value of zero will keep a port disabled (until next device restart)." + ::= { tnLoopProtectBaseEntry 3 } + +tnLoopProtectPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnLoopProtectPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used for configuring loop protect options for each port" + ::= { tnLoopProtectMgmt 2 } + +tnLoopProtectPortEntry OBJECT-TYPE + SYNTAX TnLoopProtectPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry contains configuration element of tnLoopProtectBaseTable" + INDEX { ifIndex } + ::= { tnLoopProtectPortTable 1 } +TnLoopProtectPortEntry ::= SEQUENCE { + tnLoopProtectPortEnable TruthValue, + tnLoopProtectPortAction INTEGER, + tnLoopProtectPortTxModeEnable TruthValue, + tnLoopProtectPortLoopCount Counter32, + tnLoopProtectPortStatus INTEGER, + tnLoopProtectPortLoopDetected TruthValue, + tnLoopProtectPortLastLoopTime DateAndTime +} + +tnLoopProtectPortEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls whether loop protection is enabled on this switch port." + ::= {tnLoopProtectPortEntry 1} +tnLoopProtectPortAction OBJECT-TYPE + SYNTAX INTEGER {shutdown(1),shutdownAndlog(2),log(3),trap(4),shutdownAndtrap(5),logAndtrap(6),all(7)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the action performed when a loop is detected on a port. Valid values are Shutdown Port(1), Shutdown Port and Log(2) or Log Only(3)." + ::= { tnLoopProtectPortEntry 2 } +tnLoopProtectPortTxModeEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls whether the port is actively generating loop protection PDU's, or whether it is just passively looking for looped PDU's." + ::= { tnLoopProtectPortEntry 3 } +tnLoopProtectPortLoopCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of loops detected on this port." + ::= { tnLoopProtectPortEntry 4 } +tnLoopProtectPortStatus OBJECT-TYPE + SYNTAX INTEGER{up(1),down(2),disable(3)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the port. + up(1): the status of the port is up. + down(2):the status of the port is down. + disable(3):loop is detected in this port and shutdown is triggered at the same time" + ::= { tnLoopProtectPortEntry 5 } +tnLoopProtectPortLoopDetected OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates Whether a loop is currently detected on the port." + ::= { tnLoopProtectPortEntry 6 } +tnLoopProtectPortLastLoopTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time of the last loop event detected." + ::= { tnLoopProtectPortEntry 7 } + +END + |