summaryrefslogtreecommitdiff
path: root/MIBS/transition/TN-PORT-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/transition/TN-PORT-MIB')
-rw-r--r--MIBS/transition/TN-PORT-MIB232
1 files changed, 232 insertions, 0 deletions
diff --git a/MIBS/transition/TN-PORT-MIB b/MIBS/transition/TN-PORT-MIB
new file mode 100644
index 0000000..6d624be
--- /dev/null
+++ b/MIBS/transition/TN-PORT-MIB
@@ -0,0 +1,232 @@
+-- *****************************************************************
+-- TN-PORT-MIB.my : TN Port Configuration MIB
+--
+-- Copyright (c) 2013 by Transition Networks, Inc.
+-- All rights reserved.
+--
+-- *************************************************************************************************
+--
+
+TN-PORT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ OBJECT-TYPE
+ FROM SNMPv2-SMI
+ DisplayString, TruthValue
+ FROM SNMPv2-TC
+ ifIndex
+ FROM IF-MIB
+ tnProducts
+ FROM TRANSITION-SMI;
+
+ tnPortMIB MODULE-IDENTITY
+ LAST-UPDATED "201306130000Z"
+ ORGANIZATION "Transition Networks, Inc."
+ CONTACT-INFO
+ "Transition Networks
+ Technical Support
+
+ 10900 Red Circle Drive
+ Minnetonka, MN 55343 USA
+ Tel: +1-800-526-9267
+
+ E-mail: techsupport@transition.com
+ "
+ DESCRIPTION
+ "The mib module for managing configuration
+ of port.
+ "
+ ::= { tnProducts 141 }
+
+--
+-- main body
+--
+tnPortMibNotifications OBJECT IDENTIFIER ::= { tnPortMIB 0 }
+tnPortMibObjects OBJECT IDENTIFIER ::= { tnPortMIB 1 }
+tnPortMibConformance OBJECT IDENTIFIER ::= { tnPortMIB 2 }
+
+-- ******************************************************************
+-- Port Cconfiguration Table
+-- ******************************************************************
+tnPortConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TnPortConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table displays current port configurations."
+ ::= { tnPortMibObjects 1 }
+
+tnPortConfigEntry OBJECT-TYPE
+ SYNTAX TnPortConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry represents a port configuration."
+ INDEX { ifIndex }
+ ::= { tnPortConfigTable 1 }
+
+TnPortConfigEntry ::= SEQUENCE {
+ tnPortSpeedConfigured INTEGER,
+ tnPortSpeedCurrent INTEGER,
+ tnPortFlowControlCurrentConfigured TruthValue,
+ tnPortFlowControlCurrentRx INTEGER,
+ tnPortFlowControlCurrentTx INTEGER,
+ tnPortExcessiveCollisionMode INTEGER,
+ tnPortPowerControl INTEGER
+}
+
+tnPortSpeedConfigured OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ auto(2),
+ hdx10mbps(3),
+ fdx10mbps(4),
+ hdx100mbps(5),
+ fdx100mbps(6),
+ fdx1Gbps(7),
+ fdx2500mbps(8),
+ fdx10Gbps(9)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects any available link speed for the given
+ switch port. Only speeds supported by the
+ specific port is shown. Possible speeds are:
+ Disabled - Disables the switch port operation.
+ Auto - Port auto negotiating speed with the link
+ partner and selects the highest speed that is
+ compatible with the link partner.
+ 10Mbps HDX - Forces the port in 10Mbps half duplex
+ mode.
+ 10Mbps FDX - Forces the port in 10Mbps full duplex
+ mode.
+ 100Mbps HDX - Forces the port in 100Mbps half duplex
+ mode.
+ 100Mbps FDX - Forces the port in 100Mbps full duplex
+ mode.
+ 1Gbps FDX - Forces the port in 1Gbps full duplex mode.
+ 2.5Gbps FDX - Forces the port in 2.5Gbps full duplex
+ mode
+ 10Gbps FDX - Forces the port in 10Gbps full duplex
+ mode."
+ ::= { tnPortConfigEntry 1 }
+
+tnPortSpeedCurrent OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ hdx10mbps(2),
+ fdx10mbps(3),
+ hdx100mbps(4),
+ fdx100mbps(5),
+ fdx1Gbps(6),
+ fdx2500mbps(7),
+ fdx10Gbps(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Provides the current link speed of the port.
+ Unknown - Link down.
+ 10Mbps HDX - Forces the port in 10Mbps half duplex
+ mode.
+ 10Mbps FDX - Forces the port in 10Mbps full duplex
+ mode.
+ 100Mbps HDX - Forces the port in 100Mbps half duplex
+ mode.
+ 100Mbps FDX - Forces the port in 100Mbps full duplex
+ mode.
+ 1Gbps FDX - Forces the port in 1Gbps full duplex mode.
+ 2.5Gbps FDX - Forces the port in 2.5Gbps full duplex
+ mode
+ 10Gbps FDX - Forces the port in 10Gbps full duplex
+ mode.
+ "
+ ::= { tnPortConfigEntry 2 }
+
+tnPortFlowControlCurrentConfigured OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When Auto Speed is selected on a port, this section
+ indicates the flow control capability that is
+ advertised to the link partner.
+ Check the configuredto use flow control. This setting
+ is related to the setting for Configured Link Speed.
+ "
+ ::= { tnPortConfigEntry 3 }
+
+tnPortFlowControlCurrentRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When Auto Speed is selected on a port, this section
+ indicates the flow control capability that is
+ advertised to the link partner.
+ When a fixed-speed setting is selected, that is what
+ is used. The Current Rx indicates whether pause frames
+ on the port are obeyed.
+ The Rx settings are determined by the result of the
+ last Auto-Negotiation.
+ "
+ ::= { tnPortConfigEntry 4 }
+
+tnPortFlowControlCurrentTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When Auto Speed is selected on a port, this section
+ indicates the flow control capability that is
+ advertised to the link partner.
+ When a fixed-speed setting is selected, that is what
+ is used. The Current Tx indicates whether pause frames
+ on the port are transmitted.
+ The Tx settings are determined by the result of the
+ last Auto-Negotiation.
+ "
+ ::= { tnPortConfigEntry 5 }
+
+tnPortExcessiveCollisionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ discard(1),
+ restart(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configure port transmit collision behavior.
+ Discard: Discard frame after 16 collisions (default).
+ Restart: Restart backoff algorithm after 16 collisions.
+ "
+ ::= { tnPortConfigEntry 6 }
+
+tnPortPowerControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(1),
+ actiphy(2),
+ perfectreach(3),
+ enable(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Usage column shows the current percentage of
+ the power consumption per port. The Configured
+ column allows for changing the power savings mode
+ parameters per port.
+ Disabled: All power savings mechanisms disabled.
+ ActiPHY: Link down power savings enabled.
+ PerfectReach: Link up power savings enabled.
+ Enabled: Both link up and link down power savings enabled.
+ "
+ ::= { tnPortConfigEntry 7 }
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 14:36:11 +0000