summaryrefslogtreecommitdiff
path: root/MIBS/uhp
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/uhp')
-rw-r--r--MIBS/uhp/UHP-MIB1314
1 files changed, 1314 insertions, 0 deletions
diff --git a/MIBS/uhp/UHP-MIB b/MIBS/uhp/UHP-MIB
new file mode 100644
index 0000000..179deff
--- /dev/null
+++ b/MIBS/uhp/UHP-MIB
@@ -0,0 +1,1314 @@
+UHP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, enterprises, Counter32, Gauge32
+ FROM SNMPv2-SMI
+ DisplayString
+ FROM SNMPv2-TC;
+
+uhpV32 MODULE-IDENTITY
+ LAST-UPDATED "201811021200Z"
+ ORGANIZATION "UHP Networks"
+ CONTACT-INFO "www.uhp.net"
+ DESCRIPTION "UHP terminal MIB"
+ REVISION "201810251200Z"
+ DESCRIPTION "UHP terminal MIB"
+ ::= { uhp 22 }
+
+
+
+
+
+
+uhp OBJECT IDENTIFIER ::= { enterprises 8000 }
+control OBJECT IDENTIFIER ::= { uhpV32 1 }
+demod1 OBJECT IDENTIFIER ::= { uhpV32 2 }
+demod2 OBJECT IDENTIFIER ::= { uhpV32 3 }
+modulator OBJECT IDENTIFIER ::= { uhpV32 4 }
+tdma OBJECT IDENTIFIER ::= { uhpV32 5 }
+router OBJECT IDENTIFIER ::= { uhpV32 6 }
+shaper OBJECT IDENTIFIER ::= { uhpV32 7 }
+system OBJECT IDENTIFIER ::= { uhpV32 8 }
+mobile OBJECT IDENTIFIER ::= { uhpV32 9 }
+
+-- Control
+
+ saveConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ nosave(0),
+ save0(1),
+ save1(2),
+ save2(3),
+ save3(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Save current profile to EEPROM profile 0-3.
+ Profile 0 is automativally loaded on restart by default."
+ ::= { control 1 }
+
+ reboot OBJECT-TYPE
+ SYNTAX INTEGER {
+ noreboot(1),
+ reboot(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Reboot device immediately."
+ ::= { control 2 }
+
+ command OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Issue a command to command-line interface."
+ ::= { control 3 }
+
+ configEdit OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile or global config editing and viewing
+ Complex input format, only for manufacturer."
+ ::= { control 4 }
+
+ profile OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Get current profile or run specified profile (1-8)."
+ ::= { control 5 }
+
+-- Demod1
+
+ lbandSNR1 OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal to noise ratio at L-band demodulator input
+ measured in 0.1 dB units."
+ ::= { demod1 1 }
+
+ lbandOffset1 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frequency offset value in KHz between PLL frequency and
+ carrier real frequency."
+ ::= { demod1 2 }
+
+ inLvl1 OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current input level x -10dBm"
+ ::= { demod1 3 }
+
+ inBytes1 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Demodulator1 traffic in bytes
+ (indexed by ACM channel)"
+ ::= { demod1 4 }
+
+-- Demod2
+
+ lbandSNR2 OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal to noise ratio at L-band demodulator input
+ measured in 0.1 dB units."
+ ::= { demod2 1 }
+
+ lbandOffset2 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frequency offset value in KHz between PLL frequency and
+ carrier real frequency."
+ ::= { demod2 2 }
+
+ inLvl2 OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current input level x -10dBm"
+ ::= { demod2 3 }
+
+ inBytes2 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Demodulator2 traffic in bytes
+ (indexed by ACM channel)"
+ ::= { demod2 4 }
+
+-- Modulator
+prioAll OBJECT IDENTIFIER ::= { modulator 1 }
+ outBytesA OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioAll 1 }
+
+ outPktsA OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioAll 2 }
+
+ dropsA OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator dropped packets
+ (indexed by ACM channel)"
+ ::= { prioAll 3 }
+
+ queueLenBA OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioAll 4 }
+
+ queueLenPA OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioAll 5 }
+
+ numStations OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of stations per ACM channel
+ (indexed by ACM channel)"
+ ::= { prioAll 6 }
+
+prioP1 OBJECT IDENTIFIER ::= { modulator 2 }
+
+ outBytesP1 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P1(Low) priority traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioP1 1 }
+ outPktsP1 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P1(Low) priority traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioP1 2 }
+ dropsP1 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P1(Low) priority dropped packets
+ (indexed by ACM channel)"
+ ::= { prioP1 3 }
+ queueLenBP1 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P1(Low) priority queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioP1 4 }
+ queueLenPP1 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P1(Low) priority queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioP1 5 }
+
+prioP4 OBJECT IDENTIFIER ::= { modulator 3 }
+
+ outBytesP4 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P4(Med) priority traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioP4 1 }
+ outPktsP4 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P4(Med) priority traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioP4 2 }
+ dropsP4 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P4(Med) priority dropped packets
+ (indexed by ACM channel)"
+ ::= { prioP4 3 }
+ queueLenBP4 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P4(Med) priority queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioP4 4 }
+ queueLenPP4 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P4(Med) priority queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioP4 5 }
+
+prioP7 OBJECT IDENTIFIER ::= { modulator 4 }
+
+ outBytesP7 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P7(High) priority traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioP7 1 }
+ outPktsP7 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P7(High) priority traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioP7 2 }
+ dropsP7 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P7(High) priority dropped packets
+ (indexed by ACM channel)"
+ ::= { prioP7 3 }
+ queueLenBP7 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P7(High) priority queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioP7 4 }
+ queueLenPP7 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P7(High) priority queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioP7 5 }
+
+prioCtrl OBJECT IDENTIFIER ::= { modulator 5 }
+
+ outBytesC OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator control traffic in bytes
+ (index 1 only)"
+ ::= { prioCtrl 1 }
+ outPktsC OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator control traffic in packets
+ (index 1 only)"
+ ::= { prioCtrl 2 }
+
+level OBJECT IDENTIFIER ::= { modulator 6 }
+
+ txLevel OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current TX level x -10dBm"
+ ::= { level 1 }
+
+ txLevelDelta OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current TX level delta from set level x -10dBm"
+ ::= { level 2 }
+
+ txMaxLevel OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Max TLC level x -10dBm"
+ ::= { level 3 }
+
+prioP2 OBJECT IDENTIFIER ::= { modulator 7 }
+
+ outBytesP2 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P2 priority traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioP2 1 }
+ outPktsP2 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P2 priority traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioP2 2 }
+ dropsP2 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P2 priority dropped packets
+ (indexed by ACM channel)"
+ ::= { prioP2 3 }
+ queueLenBP2 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P2 priority queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioP2 4 }
+ queueLenPP2 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P2 priority queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioP2 5 }
+
+prioP3 OBJECT IDENTIFIER ::= { modulator 8 }
+
+ outBytesP3 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P3 priority traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioP3 1 }
+ outPktsP3 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P3 priority traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioP3 2 }
+ dropsP3 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P3 priority dropped packets
+ (indexed by ACM channel)"
+ ::= { prioP3 3 }
+ queueLenBP3 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P3 priority queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioP3 4 }
+ queueLenPP3 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P3 priority queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioP3 5 }
+
+prioP5 OBJECT IDENTIFIER ::= { modulator 9 }
+
+ outBytesP5 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P5 priority traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioP5 1 }
+ outPktsP5 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P5 priority traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioP5 2 }
+ dropsP5 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P5 priority dropped packets
+ (indexed by ACM channel)"
+ ::= { prioP5 3 }
+ queueLenBP5 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P5 priority queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioP5 4 }
+ queueLenPP5 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P5 priority queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioP5 5 }
+
+prioP6 OBJECT IDENTIFIER ::= { modulator 10 }
+
+ outBytesP6 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P6 priority traffic in bytes
+ (indexed by ACM channel)"
+ ::= { prioP6 1 }
+ outPktsP6 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P6 priority traffic in packets
+ (indexed by ACM channel)"
+ ::= { prioP6 2 }
+ dropsP6 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P6 priority dropped packets
+ (indexed by ACM channel)"
+ ::= { prioP6 3 }
+ queueLenBP6 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P6 priority queue length in bytes
+ (indexed by ACM channel)"
+ ::= { prioP6 4 }
+ queueLenPP6 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modulator P6 priority queue length in packets
+ (indexed by ACM channel)"
+ ::= { prioP6 5 }
+
+-- Router
+
+ unroutedPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of packets, router couldn't route anywhere
+ (though they could have been tunneled)."
+ ::= { router 1 }
+
+ unroutedSource OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Last source IP address of unrouted packet."
+ ::= { router 2 }
+
+ unroutedDest OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Last destination IP address of unrouted packet."
+ ::= { router 3 }
+
+ outVlanBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bytes, transmitted via VLAN.
+ Requires index, which is VLAN number."
+ ::= { router 4 }
+
+ inVlanBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bytes, received via VLAN.
+ Requires index, which is VLAN number."
+ ::= { router 5 }
+
+ outSvlanBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bytes, transmitted via SVLAN.
+ Requires index, which is SVLAN number."
+ ::= { router 6 }
+
+ inSvlanBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bytes, received via SVLAN.
+ Requires index, which is SVLAN number."
+ ::= { router 7 }
+
+ inSvlanPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of packets, received via SVLAN.
+ Requires index, which is SVLAN number."
+ ::= { router 8 }
+
+-- TDMA
+
+tts OBJECT IDENTIFIER ::= { tdma 1 }
+inroute OBJECT IDENTIFIER ::= { tdma 2 }
+server OBJECT IDENTIFIER ::= { tdma 3 }
+remTable OBJECT IDENTIFIER ::= { tdma 4 }
+station OBJECT IDENTIFIER ::= { tdma 5 }
+
+-- TTS
+
+ tdelta OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "HUB/Outroute - TTS value
+ Inroute/remote - Timers delta between local station and hub
+ In 10MHz ticks.
+ Developers only"
+ ::= { tts 1 }
+
+ tdtConfidence OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "HUB/Outroute - TTS confidence value 0-64
+ Inroute/remote - Tdelta confidence 0-64"
+ ::= { tts 2 }
+
+ softErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of soft errors of TTS/Tdelta measurement algorithm.
+ Soft errors mean current value is outside averaged window."
+ ::= { tts 3 }
+
+ hardErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of hard errors of TTS/Tdelta measurement algorithm."
+ ::= { tts 4 }
+
+
+ hubTTS OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "HUB TTS value in 10MHz ticks"
+ ::= { tts 5 }
+
+ hubTTSconfidence OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "HUB TTS confidence value 0-64. It is requested from remotes or inroutes"
+ ::= { tts 6 }
+
+ remoteTTS OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remote TTS value with compensations in 10MHz ticks. Developers only"
+ ::= { tts 7 }
+
+-- Inroute
+
+ netState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ init(1),
+ noConfig(2),
+ useConfig(3),
+ redundant(4),
+ startRX(5),
+ cotmPointing(6),
+ startHubTX(7),
+ noRX(8),
+ identify(9),
+ getNetConfig(10),
+ calcDelays(11),
+ startTDMA(12),
+ startTX(13),
+ acquisition(14),
+ adjustment(15),
+ noStations(16),
+ operation(17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Operation sequence level"
+ ::= { inroute 1 }
+
+ frameDelay OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Delay in frames between TX and RX processing. Developers only"
+ ::= { inroute 2 }
+
+ sectionBW OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bandwidth in Bits/second of single slot in frame"
+ ::= { inroute 3 }
+
+ netRequest OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sum of all requests of all stations (slots)"
+ ::= { inroute 4 }
+
+ freeSlots OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of free-allocated slots in current frame"
+ ::= { inroute 5 }
+
+ netLoad OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Network load in % (values, greater than 100% mean overload)"
+ ::= { inroute 6 }
+
+-- Server
+
+ serverStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ init(1),
+ noConfig(2),
+ useConfig(3),
+ redundant(4),
+ startRX(5),
+ cotmPointing(6),
+ startHubTX(7),
+ noRX(8),
+ identify(9),
+ getNetConfig(10),
+ calcDelays(11),
+ startTDMA(12),
+ startTX(13),
+ acquisition(14),
+ adjustment(15),
+ noStations(16),
+ operation(17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Server reply status"
+ ::= { server 1 }
+
+ frameDuration OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frame duration in 10M ticks"
+ ::= { server 2 }
+
+-- Remotes statistics table ( No SNMP_NEXT, direct remotes 1-252 addressing by index)
+
+ rxBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Summary number of bytes, received from this remote"
+ ::= { remTable 1 }
+
+ p1Bytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of P1(Low) priority bytes, received from this remote"
+ ::= { remTable 2 }
+
+ p4Bytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of P4(Med) priority bytes, received from this remote"
+ ::= { remTable 3 }
+
+ p7Bytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of P7(High) priority bytes, received from this remote"
+ ::= { remTable 4 }
+
+ crcErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of CRC errors, during reception of this remote"
+ ::= { remTable 5 }
+
+ carrierToNoise OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Receive carrier-to-noise ratio of this remote in 0.1 dB steps"
+ ::= { remTable 6 }
+
+ freqOffset OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Receive Frequency offset of this remote in Hz"
+ ::= { remTable 7 }
+
+ remRecvHub OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "How this remote receives the hub in 0.1 dB steps"
+ ::= { remTable 8 }
+
+ linkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1),
+ down(2),
+ off(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link state of this remote"
+ ::= { remTable 9 }
+
+ lastHeard OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time in seconds since last burst was received from remote. Developers only"
+ ::= { remTable 10 }
+
+ downTimes OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "How many times remote changed state to DOWN"
+ ::= { remTable 11 }
+
+ totalRequest OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current non-real-time + real-time request from remote"
+ ::= { remTable 12 }
+
+ nrtRequest OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current non-real-time request from remote"
+ ::= { remTable 13 }
+
+ rtmRequest OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current real-time request from remote"
+ ::= { remTable 14 }
+
+ currentFP OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of sections, allocated in current frame plan for remote"
+ ::= { remTable 15 }
+
+ txLvl OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current transmit level x -0.1 dBm (1:360 -> -0.1:-36 dBm)"
+ ::= { remTable 16 }
+
+ faults OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Station faults bitmap: 1-service monitoring local warning (LWRN);2-service monitoring local alarm (LFLT);4-service monitoring network warning (NWRN);8-service monitoring network alarm (NFLT);0x10 system fault (SYST);0x20 reboot fault (REBT);0x40 LAN down (LAN);0x80 RX offset fault (OFFS);0x100 CRC errors (CRC);0x200 TLC fault (TLC)"
+ ::= { remTable 17 }
+
+ p2Bytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of P2 priority bytes, received from this remote"
+ ::= { remTable 18 }
+
+ p3Bytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of P3 priority bytes, received from this remote"
+ ::= { remTable 19 }
+
+ p5Bytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of P5 priority bytes, received from this remote"
+ ::= { remTable 20 }
+
+ p6Bytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of P6 priority bytes, received from this remote"
+ ::= { remTable 21 }
+
+
+-- Station data
+
+ stationState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ init(1),
+ noConfig(2),
+ useConfig(3),
+ redundant(4),
+ startRX(5),
+ cotmPointing(6),
+ startHubTX(7),
+ noRX(8),
+ identify(9),
+ getNetConfig(10),
+ calcDelays(11),
+ startTDMA(12),
+ startTX(13),
+ acquisition(14),
+ adjustment(15),
+ noStations(16),
+ operation(17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remote initialization sequence level"
+ ::= { station 1 }
+
+ remnrtRequest OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Request for non-real-time bandwidth in sections"
+ ::= { station 2 }
+
+ remrtRequest OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Request for real-time bandwidth in sections"
+ ::= { station 3 }
+
+ fpLost OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Lost frame plans number"
+ ::= { station 4 }
+
+ lvlOffset OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Offset between reference level and C/N level on hub. Developers only"
+ ::= { station 5 }
+
+ lvlAdjust OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TX power level adjustment value in 0.1 dB steps"
+ ::= { station 6 }
+
+ frqOffset OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frequency offset on hub. Developers only"
+ ::= { station 7 }
+
+ frqAdjust OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TX frequency adjustment value in Hz. Developers only"
+ ::= { station 8 }
+
+ timeOffset OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Timing offset on hub in symbols"
+ ::= { station 9 }
+
+ timeAdjust OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TX timing adjustment value in 10M ticks"
+ ::= { station 10 }
+
+-- Traffic Shaper stats ( No SNMP_NEXT, direct stream 0-500 addressing by index)
+
+ streamSpeed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of current stream"
+ ::= { shaper 1 }
+
+ streamP1Speed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of P1(Low) priority sub-stream"
+ ::= { shaper 2 }
+
+ streamP4Speed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of P4(Med) priority sub-stream"
+ ::= { shaper 3 }
+
+ streamP7Speed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of P7(High) priority sub-stream"
+ ::= { shaper 4 }
+
+ streamDelay OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current packets delay in stream x 0.1s"
+ ::= { shaper 5 }
+
+ streamQueue OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current stream queue length in bytes"
+ ::= { shaper 6 }
+
+ streamP2Speed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of P2 priority sub-stream"
+ ::= { shaper 7 }
+
+ streamP3Speed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of P3 priority sub-stream"
+ ::= { shaper 8 }
+
+ streamP5Speed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of P5 priority sub-stream"
+ ::= { shaper 9 }
+
+ streamP6Speed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current speed in Kbits per second of P6 priority sub-stream"
+ ::= { shaper 10 }
+
+-- System stats
+
+ temperature OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current temperature"
+ ::= { system 1 }
+
+ cpuLoad OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current CPU load in percent"
+ ::= { system 2 }
+
+ buffers OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current buffers usage in percent"
+ ::= { system 3 }
+
+ redundancy OBJECT-TYPE
+ SYNTAX INTEGER {
+ idle(0),
+ backup(1),
+ faults(2),
+ trying(3),
+ active(4),
+ off(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current redundancy state"
+ ::= { system 4 }
+
+ swVersion OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Software version. Four numbers of version contained in four bytes
+ in order of precedence (see as hexadecimal)."
+ ::= { system 5 }
+
+ releaseDate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Release date. Two low bytes of number contain year,
+ then month and day (see as hexadecimal)."
+ ::= { system 6 }
+
+-- Mobile
+
+ version OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Software (protocol) version. Number 10 means V1.0"
+ ::= { mobile 1 }
+
+ serialNumber OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Serial number of this unit. If printed on the screen should be
+ printed as hexadecimal! Example - 4660 returned should be printed
+ as 1234 in hex."
+ ::= { mobile 2 }
+
+ inputLevel OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Input baseband RF level in -0.1dBm steps. 500 means -50 dBm.
+ Higher value means lower level. 800 (-80dBm) means no signal."
+ ::= { mobile 3 }
+
+
+ rxState OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Composite value to provide controller with receive and overall state.
+ 0 means no RX lock.
+ 1 means absence of coordinates (send location data).
+ 2 means absence of TX status (send TX control command).
+ 3-250 means RX lock and shows demodulator C/N level in 0.1dBm
+ steps (e.g. 100 means C/N=10 dB).
+ Actual in all modes of operation. In SCPC/Star modes shows
+ SCPC demodulator level, in FullMesh mode burst demodulator level."
+ ::= { mobile 4 }
+
+
+ searchState OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "GET
+ Value in percent (0-100) of current carrier search sequence.
+ As search for narrow (<1Msps) carrier with high offset (DRO
+ LNB) can last up-to 30 seconds, controller can wait until
+ the whole acquisition bandwidth is scanned at least once.
+ SET
+ Writing any value restarts search cycle."
+ ::= { mobile 5 }
+
+ txControl OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "GET
+ Current TX status (0-off, 1-on).
+ SET
+ Writing 0 turns TX off, 1 - turns on."
+ ::= { mobile 6 }
+
+ location OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "GET
+ Not applicable.
+ SET
+ NMEA RMC string
+ $GPRMC,hhmmss.ss,A,GGMM.MM,P,gggmm.mm,J,v.v,b.b,ddmmyy,x.x,n,m*hh<CR><LF>
+ Location should be re-supplied if changed more than 1 minute by any coordinate."
+ ::= { mobile 7 }
+
+END \ No newline at end of file
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 09:55:26 +0000