path: root/MIBS/ATM-FORUM-MIB

ATM-FORUM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	DisplayString				FROM RFC1213-MIB    
	enterprises, Counter, IpAddress        	FROM RFC1155-SMI 
	OBJECT-TYPE                 		FROM RFC-1212;

--atmForum 	 MODULE-IDENTITY
--    	LAST-UPDATED "200003010000Z"
--    	ORGANIZATION "Juniper Networks, Inc."
--    	CONTACT-INFO
--            	"  	Ramana Gadagottu
--		    	Juniper Networks, Inc.
--		     	385 Ravendale Drive
--		     	Mountain View, CA 94043
--		     	E-mail: ramana@juniper.net"
--
--   	DESCRIPTION
--          	"The MIB modules representing Juniper Networks'
--	    	implementation of ILMI MIBs 
--	    	supported by a single SNMP agent."
--   	::= { enterprises 353 }

atmForum            OBJECT IDENTIFIER ::= { enterprises 353 }

------------------------------------------------------------------------
		-- a subtree for defining administrative
		-- object identifiers
atmForumAdmin   OBJECT IDENTIFIER ::= { atmForum 1 }

		-- a subtree for defining UNI MIB object types 
atmForumUni     OBJECT IDENTIFIER ::= { atmForum 2 }


------------------------------------------------------------------------
-- Textual Conventions

-- All representations of ATM addresses in this MIB Module use 
-- the data type:

AtmAddress ::= OCTET STRING (SIZE (0 .. 32))

-- Note this data type is used only by the deprecated object 
-- atmfPortAddress. Another definition (a refined one) is
-- specified in the separate MIB for Address Registration.

-- Representations in this MIB Module of an ATM address
-- use the data type:

AtmAddress2 ::= OCTET STRING (SIZE (8 | 20))

-- Representations in this MIB Module of a network-prefix
-- for an ATM address use the data type:

NetPrefix ::= OCTET STRING (SIZE (8 | 13))

-- in both the AtmAddress2 and NetPrefix conventions, non-NSAP-encoded E.164
-- addresses are represented as 8 octets using the format specified in
-- section 5.1.3.1.4.
-- In contrast, an NSAP-encoded address is 20 octets, and an
-- NSAP-encoded network
-- prefix is 13 octets long.


------------------------------------------------------------------------
--		Object Identifier definitions

-- The following values are defined for use as possible values 
-- of the atmfPortTransmissionType object.

atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 }

-- unknown transmission type
atmfUnknownType  
		OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1}

-- Sonet STS-3c physical layer at 155.52 Mbps 
atmfSonetSTS3c	
		OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 }

-- DS3 physical layer at 44.736 Mbps
atmfDs3		
		OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 }

-- 4B/5B encoding physical layer at 100 Mbps
atmf4B5B		
		OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 }

-- 8B/10B encoding physical layer at 155.52 Mbps 
atmf8B10B		
		OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 }


-- The following values are defined for use as possible values 
-- of the atmfPortMediaType object.

atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 }

-- unknown media type
atmfMediaUnknownType  
		OBJECT IDENTIFIER ::= { atmfMediaTypes 1 }

-- Coaxial cable
atmfMediaCoaxCable	
		OBJECT IDENTIFIER ::= { atmfMediaTypes 2 }

-- Single Mode fiber
atmfMediaSingleMode	
		OBJECT IDENTIFIER ::= { atmfMediaTypes 3 }

-- Multi Mode fiber
atmfMediaMultiMode	
		OBJECT IDENTIFIER ::= { atmfMediaTypes 4 }

-- Shielded Twisted Pair
atmfMediaStp	
		OBJECT IDENTIFIER ::= { atmfMediaTypes 5 }

-- Unshielded Twisted Pair
atmfMediaUtp	
		OBJECT IDENTIFIER ::= { atmfMediaTypes 6 }


-- The following values are defined for use as possible values 
-- of the atmfVpcTransmitTrafficDescriptorType, 
-- atmfVpcReceiveTrafficDescriptorType,
-- atmfVccTransmitTrafficDescriptorType and
-- atmfVccReceiveTrafficDescriptorType objects.

atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 }

-- The "None" Traffic Descriptor Type
atmfNoDescriptor 
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 }

-- 
atmfPeakRate
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 }
-- This type is no longer used

-- 
-- The No CLP/No SCR Type
atmfNoClpNoScr 
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameters #2, #3, #4 and #5 are unused

-- 
-- The CLP without Tagging/No SCR Type
atmfClpNoTaggingNoScr  
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - peak cell rate in cells/second for CLP=0 traffic
-- Parameters #3, #4 and #5 are unused

-- 
-- The CLP with Tagging/No SCR Type
atmfClpTaggingNoScr
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - peak cell rate in cells/second for 
--	CLP=0 traffic, excess tagged as CLP=1
-- Parameters #3, #4 and #5 are unused

-- 
-- The SCR/No CLP Type
atmfNoClpScr 
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused

-- 
-- The CLP without Tagging/SCR Type
atmfClpNoTaggingScr
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused

-- 
-- The CLP with Tagging/SCR Type
atmfClpTaggingScr
		OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0
-- 	traffic, excess tagged as CLP=1
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused

------------------------------------------------------------------------
--			The MIB groups
atmfPhysicalGroup	OBJECT IDENTIFIER ::= { atmForumUni 1 }
atmfAtmLayerGroup	OBJECT IDENTIFIER ::= { atmForumUni 2 }
atmfAtmStatsGroup	OBJECT IDENTIFIER ::= { atmForumUni 3 }
atmfVpcGroup		OBJECT IDENTIFIER ::= { atmForumUni 4 }
atmfVccGroup		OBJECT IDENTIFIER ::= { atmForumUni 5 }

--  New MIB Groups

atmfAddressGroup        OBJECT IDENTIFIER ::= { atmForumUni 6 }
atmfNetPrefixGroup      OBJECT IDENTIFIER ::= { atmForumUni 7 }

------------------------------------------------------------------------
--			The Physical Port Group
-- This group is mandatory for all UNI devices.
-- 
-- The Physical Port Table

atmfPortTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AtmfPortEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"A table of physical layer status and parameter information for the 
		UNI's physical interface."
	::= { atmfPhysicalGroup 1 }

atmfPortEntry OBJECT-TYPE
	SYNTAX		AtmfPortEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"An entry in the table, containing information about the physical layer 
		of a UNI interface."
	INDEX	 { atmfPortIndex }
	::= { atmfPortTable 1 }

AtmfPortEntry ::=
	SEQUENCE {
		atmfPortIndex
			INTEGER,
		atmfPortAddress
			AtmAddress,
		atmfPortTransmissionType
			OBJECT IDENTIFIER,
		atmfPortMediaType
			OBJECT IDENTIFIER,
		atmfPortOperStatus
			INTEGER,
		atmfPortSpecific
			OBJECT IDENTIFIER,
		atmfPortMyIfName 
			DisplayString
	}

atmfPortIndex OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"A unique value which identifies this port. The value of 0 has the 
		special meaning of identifying the local UNI."
	::= { atmfPortEntry 1 }

atmfPortAddress OBJECT-TYPE
	SYNTAX		AtmAddress
	ACCESS		read-only
	STATUS		deprecated
	DESCRIPTION
		"This object should not be implemented except as required for backward 
		compatibility with version 2.0 of the UNI specification. The Address Group, 
		defined as part of the separate Address Registration MIB should be used 
		instead."
	::= { atmfPortEntry 2 }

atmfPortTransmissionType OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The transmission type of this port. For example, for a port using the 
		Sonet STS-3c physical layer at 155.52 Mbs, this object would have the 
		Object Identifier value: atmfSonetSTS3c."
	::= { atmfPortEntry 3 }

atmfPortMediaType OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The type of media being used on this port. For example, for a port using 
		coaxial cable, this object would have the Object Identifier value: 
		atmfMediaCoaxCable."
	::= { atmfPortEntry 4 }

atmfPortOperStatus OBJECT-TYPE
	SYNTAX		INTEGER {
				other(1),
				inService(2),
				outOfService(3),
				loopBack(4)
			}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The operational (i.e., actual) state of this port.
		The ILMI should not alarm on a physical interface for when the value of this 
		object is outOfService(3). This capability is useful if equipment is to be 
		disconnected, or for troubleshooting purposes.
		A value of loopBack(4) indicates that a local loopback is in place. "
	::= { atmfPortEntry 5 }

atmfPortSpecific  OBJECT-TYPE
	SYNTAX    OBJECT IDENTIFIER
	ACCESS    read-only
	STATUS    mandatory
	DESCRIPTION
		"This object 'points' to additional transmission and/or media specific 
		information relating to this port. In particular, this object's value 
		is the name of a specific instance of the first columnar object of a MIB 
		table with such additional information, where the specific instance is the 
		one which corresponds to this port.
		For example, for a DS3 interface, this object would contain the value, as 
		defined in RFC 1407:
			dsx3LineIndex.i
		where i would be the integer value uniquely identifying the DS3 interface 
		corresponding to this port.  If no additional transmission and/or media 
		specific information is available, this object has the value { 0 0 }."
	::= { atmfPortEntry 6 }

atmfPortMyIfName  OBJECT-TYPE
	SYNTAX		DisplayString
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"A textual name of this interface. If this systme is manageable through
		SNMP, and supports the object ifName, the value of this object must be
		identical with that of ifName for the ifEntry of the lowest level physical
		interface for this port. This interface must be uniquely names on this system
		to distinguish parallel links with a neighboring system. If this interface
		does not have a textual name, the value of this object is a zero length
		string."
	::= { atmfPortEntry 7 }


------------------------------------------------------------------------
 
-- Note: Typical UME will support only one of the following two objects

atmfMyIpNmAddress  OBJECT-TYPE
	SYNTAX		IpAddress
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"An IP Address to which a Network Management Station can send Network
		Management protocol, e.g. SNMP messages to UDP port 161, in order to
		access network management information concerning the operation of the
		ATM devide local to this UME."
	::= { atmfPhysicalGroup 2 }

-- atmfMyOsiNmNsapAddress  OBJECT-TYPE
-- 	SYNTAX		NsapAddress
-- 	ACCESS		read-only
-- 	STATUS		mandatory
--	DESCRIPTION
--		"An NSAP Address to which a Network Management Station can send Network
-- 		Management protocol messages in order to access network management 
--		information concerning the operation of the ATM devide local to this UME."
--	::= { atmfPhysicalGroup 3 }



------------------------------------------------------------------------
--			The ATM Layer Group
-- This group is mandatory for all UNI devices.
-- 
-- ATM-layer specific information for the UNI interface

atmfAtmLayerTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AtmfAtmLayerEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"A table of ATM layer status and parameter information for the UNI's 
		physical interface."
	::= { atmfAtmLayerGroup 1 }

atmfAtmLayerEntry OBJECT-TYPE
	SYNTAX		AtmfAtmLayerEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"An entry in the table, containing information about the ATM layer of a UNI 
		interface."
	INDEX	 { atmfAtmLayerIndex }
	::= { atmfAtmLayerTable 1 }

AtmfAtmLayerEntry ::=
	SEQUENCE {
		atmfAtmLayerIndex
			INTEGER,
		atmfAtmLayerMaxVPCs
			INTEGER,
		atmfAtmLayerMaxVCCs
			INTEGER,
		atmfAtmLayerConfiguredVPCs
			INTEGER,
		atmfAtmLayerConfiguredVCCs
			INTEGER,
		atmfAtmLayerMaxVpiBits
			INTEGER,
		atmfAtmLayerMaxVciBits
			INTEGER,
		atmfAtmLayerUniType
			INTEGER,
		atmfAtmLayerUniVersion
			INTEGER
	}

atmfAtmLayerIndex OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The unique value which identifies the UNI port. The value of 0 has the 
		special meaning of identifying the local UNI."
	::= { atmfAtmLayerEntry 1 }

atmfAtmLayerMaxVPCs OBJECT-TYPE
	SYNTAX		INTEGER (0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The maximum number of switched and permanent VPCs supported on this UNI."
	::= { atmfAtmLayerEntry 2 }

atmfAtmLayerMaxVCCs OBJECT-TYPE
	SYNTAX		INTEGER (0..16777215)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The maximum number of switched and permanent VCCs supported on this UNI."
	::= { atmfAtmLayerEntry 3 }

atmfAtmLayerConfiguredVPCs OBJECT-TYPE
	SYNTAX		INTEGER (0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The number of permanent VPCs configured for use on this UNI."
	::= { atmfAtmLayerEntry 4 }

atmfAtmLayerConfiguredVCCs OBJECT-TYPE
	SYNTAX		INTEGER (0..16777215)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The number of permanent VCCs configured for use on this UNI."
	::= { atmfAtmLayerEntry 5 }

atmfAtmLayerMaxVpiBits OBJECT-TYPE
	SYNTAX		INTEGER (0..8)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The number of active VPI bits on this interface."
	::= {atmfAtmLayerEntry 6 }

atmfAtmLayerMaxVciBits OBJECT-TYPE
	SYNTAX		INTEGER (0..16)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The number of active VCI bits on this interface."
	::= {atmfAtmLayerEntry 7 }

atmfAtmLayerUniType OBJECT-TYPE
	SYNTAX		INTEGER {public(1), private(2)}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The type of the ATM UNI, either public or private."
	::= { atmfAtmLayerEntry 8 }

atmfAtmLayerUniVersion OBJECT-TYPE
	SYNTAX		INTEGER {
				version2point0(1),
				version3point0(2),
				version3point1(3)
			}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"An indication of the latest version of the ATM Forum UNI Specification 
		that is supported on this UNI. If this value is not present, a version
		of the UNI earlier than 3.1 is supported. If a value greated than 
		version3point1 is persent, then UNI 3.1 communication should be attempt.

		If the peer UNE's value of this object is the same as, or later than the
		local UME's value, then the version corresponding to the local UME's
		value should be attempted. Otherwise, if the peer UME's value of this 
		object is earlier, and supported locally, then the local UME should attempt 
		the version corresponding to the peer UME's value. Otherwise, compatability 
		of the two UMEs cannot be assumed."
	::= { atmfAtmLayerEntry 9 }

------------------------------------------------------------------------
--			The ATM Statistics Group
-- This group is optional. However, if any objects in this group 
-- are supported, then all objects in the group must be supported. 
-- 
-- ATM-layer statistics for the UNI interface

atmfAtmStatsTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AtmfAtmStatsEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"A table of ATM layer statistics information for
		the UNI's physical interface."
	::= { atmfAtmStatsGroup 1 }

atmfAtmStatsEntry OBJECT-TYPE
	SYNTAX		AtmfAtmStatsEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"An entry in the table, containing statistics for the ATM layer of a 
		UNI interface."
	INDEX	 { atmfAtmStatsIndex }
	::= { atmfAtmStatsTable 1 }

AtmfAtmStatsEntry ::=
	SEQUENCE {
		atmfAtmStatsIndex
			INTEGER,
		atmfAtmStatsReceivedCells
			Counter,
		atmfAtmStatsDroppedReceivedCells
			Counter,
		atmfAtmStatsTransmittedCells
			Counter
	}
atmfAtmStatsIndex OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The unique value which identifies the UNI port. The value of 0 has the 
		special meaning of identifying the local UNI."
	::= { atmfAtmStatsEntry 1 }

atmfAtmStatsReceivedCells OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The accumulated number of  ATM cells received on this UNI which were 
		assigned and not dropped."
	::= { atmfAtmStatsEntry 2 }

atmfAtmStatsDroppedReceivedCells OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The accumulated number of ATM cells which were dropped for the reasons 
		defined in section 4.4.4.2."
	::= { atmfAtmStatsEntry 3 }

atmfAtmStatsTransmittedCells OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The accumulated number of assigned ATM cells which were transmitted across 
		this interface."
	::= { atmfAtmStatsEntry 4 }


------------------------------------------------------------------------
--			The Virtual Path Group
-- This group is mandatory for all UNI devices.
-- 
-- Information concerning Virtual Path Connections

atmfVpcTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AtmfVpcEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"A table of status and parameter information on the virtual path connections 
		which cross this UNI. These is one entry in this table for each permanent
		virtual path connection."
	::= { atmfVpcGroup 1 }

atmfVpcEntry OBJECT-TYPE
	SYNTAX		AtmfVpcEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"An entry in the table, containing information about a particular virtual path 
		connection."
	INDEX	 { atmfVpcPortIndex, atmfVpcVpi }
	::= { atmfVpcTable 1 }

AtmfVpcEntry ::=
	SEQUENCE {
		atmfVpcPortIndex
			INTEGER,
		atmfVpcVpi
			INTEGER,
		atmfVpcOperStatus
			INTEGER,
		atmfVpcTransmitTrafficDescriptorType
			OBJECT IDENTIFIER, 
		atmfVpcTransmitTrafficDescriptorParam1
			INTEGER,
		atmfVpcTransmitTrafficDescriptorParam2
			INTEGER,
		atmfVpcTransmitTrafficDescriptorParam3
			INTEGER,
		atmfVpcTransmitTrafficDescriptorParam4
			INTEGER,
		atmfVpcTransmitTrafficDescriptorParam5
			INTEGER,
		atmfVpcReceiveTrafficDescriptorType
			OBJECT IDENTIFIER, 
		atmfVpcReceiveTrafficDescriptorParam1
			INTEGER,
		atmfVpcReceiveTrafficDescriptorParam2
			INTEGER,
		atmfVpcReceiveTrafficDescriptorParam3
			INTEGER,
		atmfVpcReceiveTrafficDescriptorParam4
			INTEGER,
		atmfVpcReceiveTrafficDescriptorParam5
			INTEGER,
		atmfVpcQoSCategory
			INTEGER,
		atmfVpcTransmitQoSClass
			INTEGER,
		atmfVpcReceiveQoSClass
			INTEGER
	}

atmfVpcPortIndex OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The unique value which identifies the UNI port. The value of 0 has the 
		special meaning of identifying the local UNI."
	::= { atmfVpcEntry 1 }

atmfVpcVpi OBJECT-TYPE
	SYNTAX		INTEGER (0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The VPI value of this Virtual Path Connection at the local UNI."
	::= { atmfVpcEntry 2 }

atmfVpcOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
			unknown(1),
			end2endUp(2),
			end2endDown(3),
			localUpEnd2endUnknown(4),
			localDown(5)
		}
	ACCESS 		read-only
	STATUS 		mandatory
	DESCRIPTION
		"The present actual operational status of the VPC.

		A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end 
		status is known. If only local status information is available, a value of 
		localUpEnd2endUnknown(4) or localDown(5) would be used."
		::= { atmfVpcEntry 3 }

atmfVpcTransmitTrafficDescriptorType OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The type of traffic management, applicable to the transmit direction of 
		this VPC. The type may indicate none, or a type with one or more parameters. 
		These parameters are specified as a parameter vector, in the corresponding 
		instances of the objects: 
		atmfVpcTransmitTrafficDescriptorParam1, 
		atmfVpcTransmitTrafficDescriptorParam2, 
		atmfVpcTransmitTrafficDescriptorParam3, 
		atmfVpcTransmitTrafficDescriptorParam4, and 
		atmfVpcTransmitTrafficDescriptorParam5."
	::= { atmfVpcEntry 4 }

atmfVpcTransmitTrafficDescriptorParam1 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The first parameter of the transmit parameter vector for this VPC, used 
		according to the value of atmfVpcTransmitTrafficDescriptorType."
	::= { atmfVpcEntry 5 }

atmfVpcTransmitTrafficDescriptorParam2 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The second parameter of the transmit parameter vector for this VPC, used 
		according to the value of atmfVpcTransmitTrafficDescriptorType."
	::= { atmfVpcEntry 6 }

atmfVpcTransmitTrafficDescriptorParam3 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The third parameter of the transmit parameter vector for this VPC, used 
		according to the value of atmfVpcTransmitTrafficDescriptorType."
	::= { atmfVpcEntry 7 }

atmfVpcTransmitTrafficDescriptorParam4 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fourth parameter of the transmit parameter vector for this VPC, used 
		according to the value of atmfVpcTransmitTrafficDescriptorType."
	::= { atmfVpcEntry 8 }

atmfVpcTransmitTrafficDescriptorParam5 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fifth parameter of the transmit parameter vector for this VPC, used 
		according to the value of atmfVpcTransmitTrafficDescriptorType."
	::= { atmfVpcEntry 9 }

atmfVpcReceiveTrafficDescriptorType OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The type of traffic management, applicable to the traffic in the receive 
		direction of this VPC. The type may indicate none, or a type with one or 
		more parameters. These parameters are specified as a parameter vector, in 
		the corresponding instances of the objects: 
		atmfVpcReceiveTrafficDescriptorParam1, 
		atmfVpcReceiveTrafficDescriptorParam2, 
		atmfVpcReceiveTrafficDescriptorParam3, 
		atmfVpcReceiveTrafficDescriptorParam4, and 
		atmfVpcReceiveTrafficDescriptorParam5."
	::= { atmfVpcEntry 10 }

atmfVpcReceiveTrafficDescriptorParam1 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The first parameter of the receive parameter vector for this VPC, used 
		according to the value of atmfVpcReceiveTrafficDescriptorType."
	::= { atmfVpcEntry 11 }

atmfVpcReceiveTrafficDescriptorParam2 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The second parameter of the receive parameter vector for this VPC, used 
		according to the value of atmfVpcReceiveTrafficDescriptorType."
	::= { atmfVpcEntry 12 }

atmfVpcReceiveTrafficDescriptorParam3 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The third parameter of the receive parameter vector for this VPC, used 
		according to the value of atmfVpcReceiveTrafficDescriptorType."
	::= { atmfVpcEntry 13 }

atmfVpcReceiveTrafficDescriptorParam4 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fourth parameter of the receive parameter vector for this VPC, used 
		according to the value of atmfVpcReceiveTrafficDescriptorType."
	::= { atmfVpcEntry 14 }

atmfVpcReceiveTrafficDescriptorParam5 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fifth parameter of the receive parameter vector for this VPC, used 
		according to the value of atmfVpcReceiveTrafficDescriptorType."
	::= { atmfVpcEntry 15 }

atmfVpcQoSCategory OBJECT-TYPE
	SYNTAX		INTEGER { 
				other(1),
				deterministic (2),
				statistical (3),
				unspecified (4)
			}
	ACCESS		read-only
	STATUS		deprecated
	DESCRIPTION
		"This object should not be implemented except as required for backward 
		compatibility with version 2.0 of the UNI specification."
	::= { atmfVpcEntry 16 }

atmfVpcTransmitQoSClass  OBJECT-TYPE
	SYNTAX		INTEGER (0..255)
	ACCESS		read-only
	STATUS 		mandatory
	DESCRIPTION
		"The QoS Class, as defined in section 4 of  Appendix A, for the transmit 
		direction of this VPC connection at the local UNI." 
	::= { atmfVpcEntry 17 }

atmfVpcReceiveQoSClass  OBJECT-TYPE
	SYNTAX		INTEGER (0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The QoS Class, as defined in section 4 of Appendix A, for the receive 
		direction of this VPC connection at the local UNI." 
	::= { atmfVpcEntry 18 }

------------------------------------------------------------------------
--			The Virtual Channel Group
-- This group is mandatory for all UNI devices.
-- 
-- Information concerning Virtual Channel Connections

atmfVccTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AtmfVccEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"A table of status and parameter information on the virtual channel 
		connections which are visible at this UNI. There is one entry in this 
		table for each permanent virtual channel connection, including reserved 
		VCC that are supported: e.g., signalling, OAM flows, and ILMI, but not 
		unassigned cells."
	::= { atmfVccGroup 1 }

atmfVccEntry OBJECT-TYPE
	SYNTAX		AtmfVccEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION
		"An entry in the table, containing information about a particular virtual 
		channel connection."
	INDEX	 { atmfVccPortIndex, atmfVccVpi, atmfVccVci }
	::= { atmfVccTable 1 }

AtmfVccEntry ::=
	SEQUENCE {
		atmfVccPortIndex
			INTEGER,
		atmfVccVpi
			INTEGER,
		atmfVccVci
			INTEGER,
		atmfVccOperStatus
			INTEGER,
		atmfVccTransmitTrafficDescriptorType
			OBJECT IDENTIFIER, 
		atmfVccTransmitTrafficDescriptorParam1
			INTEGER,
		atmfVccTransmitTrafficDescriptorParam2
			INTEGER,
		atmfVccTransmitTrafficDescriptorParam3
			INTEGER,
		atmfVccTransmitTrafficDescriptorParam4
			INTEGER,
		atmfVccTransmitTrafficDescriptorParam5
			INTEGER,
		atmfVccReceiveTrafficDescriptorType
			OBJECT IDENTIFIER, 
		atmfVccReceiveTrafficDescriptorParam1
			INTEGER,
		atmfVccReceiveTrafficDescriptorParam2
			INTEGER,
		atmfVccReceiveTrafficDescriptorParam3
			INTEGER,
		atmfVccReceiveTrafficDescriptorParam4
			INTEGER,
		atmfVccReceiveTrafficDescriptorParam5
			INTEGER,
		atmfVccQoSCategory
			INTEGER,
		atmfVccTransmitQoSClass
			INTEGER,
		atmfVccReceiveQoSClass
			INTEGER
	}

atmfVccPortIndex OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The unique value which identifies the UNI port. The value of 0 has the 
		special meaning of identifying the local UNI."
	::= { atmfVccEntry 1 }

atmfVccVpi OBJECT-TYPE
	SYNTAX		INTEGER (0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The VPI value of this Virtual Channel Connection at the local UNI."
	::= { atmfVccEntry 2 }

atmfVccVci OBJECT-TYPE
	SYNTAX		INTEGER (0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The VCI value of this Virtual Channel Connection at the local UNI."
	::= { atmfVccEntry 3 }

atmfVccOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
			unknown(1), 
			end2endUp(2), 
			end2endDown(3), 
			localUpEnd2endUnknown(4),
			localDown(5)
			}
	ACCESS 	read-only
	STATUS 	mandatory
	DESCRIPTION
		"The present actual operational status of the VCC. A value of end2endUp(2) 
		or end2endUp(3) is used if the end to end status is known.

		If only local status is known a value of localUpEnd2endUnknown(4) or 
		localDown(5) is used."
	::= { atmfVccEntry 4 }

atmfVccTransmitTrafficDescriptorType OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The type of traffic management, applicable to the transmit direction of 
		this VCC. The type may indicate none, or a type with one or more parameters. 
		These parameters are specified as a parameter vector, in the corresponding 
		instances of the objects: 
		atmfVccTransmitTrafficDescriptorParam1, 
		atmfVccTransmitTrafficDescriptorParam2, 
		atmfVccTransmitTrafficDescriptorParam3, 
		atmfVccTransmitTrafficDescriptorParam4, and 
		atmfVccTransmitTrafficDescriptorParam5."
	::= { atmfVccEntry 5 }

atmfVccTransmitTrafficDescriptorParam1 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The first parameter of the transmit parameter vector for this VCC, used 
		according to the value of atmfVccTransmitTrafficDescriptorType."
	::= { atmfVccEntry 6 }

atmfVccTransmitTrafficDescriptorParam2 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The second parameter of the transmit parameter vector for this VCC, used 
		according to the value of atmfVccTransmitTrafficDescriptorType."
	::= { atmfVccEntry 7 }

atmfVccTransmitTrafficDescriptorParam3 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The third parameter of the transmit parameter vector for this VCC, used 
		according to the value of atmfVccTransmitTrafficDescriptorType."
	::= { atmfVccEntry 8 }

atmfVccTransmitTrafficDescriptorParam4 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fourth parameter of the transmit parameter vector for this VCC, used 
		according to the value of atmfVccTransmitTrafficDescriptorType."
	::= { atmfVccEntry 9 }

atmfVccTransmitTrafficDescriptorParam5 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fifth parameter of the transmit parameter vector for this VCC, used 
		according to the value of atmfVccTransmitTrafficDescriptorType."
	::= { atmfVccEntry 10 }

atmfVccReceiveTrafficDescriptorType OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The type of traffic management, applicable to the traffic in the receive 
		direction of this VCC. The type may indicate none, or a type with one or 
		more parameters. 
		These parameters are specified as a parameter vector, in the corresponding 
		instances of the objects: 
		atmfVccReceiveTrafficDescriptorParam1, 
		atmfVccReceiveTrafficDescriptorParam2, 
		atmfVccReceiveTrafficDescriptorParam3, 
		atmfVccReceiveTrafficDescriptorParam4, and 
		atmfVccReceiveTrafficDescriptorParam5."
	::= { atmfVccEntry 11 }

atmfVccReceiveTrafficDescriptorParam1 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The first parameter of the receive parameter vector for this VCC, used 
		according to the value of atmfVccReceiveTrafficDescriptorType."
	::= { atmfVccEntry 12 }

atmfVccReceiveTrafficDescriptorParam2 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The second parameter of the receive parameter vector for this VCC, used 
		according to the value of atmfVccReceiveTrafficDescriptorType."
	::= { atmfVccEntry 13 }

atmfVccReceiveTrafficDescriptorParam3 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The third parameter of the receive parameter vector for this VCC, used 
		according to the value of atmfVccReceiveTrafficDescriptorType."
	::= { atmfVccEntry 14 }

atmfVccReceiveTrafficDescriptorParam4 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fourth parameter of the receive parameter vector for this VCC, used 
		according to the value of atmfVccReceiveTrafficDescriptorType."
	::= { atmfVccEntry 15 }

atmfVccReceiveTrafficDescriptorParam5 OBJECT-TYPE
	SYNTAX		INTEGER (0..2147483647)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The fifth parameter of the receive parameter vector for this VCC, used 
		according to the value of atmfVccReceiveTrafficDescriptorType."
	::= { atmfVccEntry 16 }

atmfVccQoSCategory OBJECT-TYPE
	SYNTAX		INTEGER { 
				other(1),
				deterministic (2),
				statistical (3),
				unspecified (4)
			}
	ACCESS		read-only
	STATUS		deprecated
	DESCRIPTION
		"This object should not be implemented except as required for backward 
		compatibility with version 2.0 of the UNI specification."
	::= { atmfVccEntry 17 }

 atmfVccTransmitQoSClass  OBJECT-TYPE
	SYNTAX		INTEGER (0..255)
	ACCESS		read-only
	STATUS 		mandatory
	DESCRIPTION
		"The QoS Class, as defined in section 4 of Appendix A, for the transmit 
		direction of this VCC connection at the local UNI."
	::= { atmfVccEntry 18 }

atmfVccReceiveQoSClass  OBJECT-TYPE
	SYNTAX		 INTEGER (0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION
		"The QoS Class, as defined in section 4 of Appendix A, for the receive 
		direction of this VCC connection at the local UNI."
	::= { atmfVccEntry 19 }


------------------------------------------------------------------------
--                  The Network Prefix Table
-- 
-- The Network Prefix Table is implemented by the UNI Management
-- Entity on the user-side of the UNI

atmfNetPrefixTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AtmfNetPrefixEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "A table implemented by the UNI Management Entity on the user-side of an 
	        ATM UNI port, containing the network-prefix(es) for ATM-layer addresses 
		in effect on the user-side of the UNI."
        ::= { atmfNetPrefixGroup 1 }

atmfNetPrefixEntry OBJECT-TYPE
        SYNTAX  AtmfNetPrefixEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "Information about a single network-prefix for ATM-layer addresses in
		effect on the user-side of a UNI port.  Note that the index variable
		atmfNetPrefixPrefix is a variable-length string, and as such the rule 
		for variable-length strings in section 4.1.6 of RFC 1212 applies."
        INDEX   { atmfNetPrefixPort, atmfNetPrefixPrefix }
        ::= { atmfNetPrefixTable 1 }

AtmfNetPrefixEntry ::=
        SEQUENCE {
                atmfNetPrefixPort       INTEGER,
                atmfNetPrefixPrefix     NetPrefix,
                atmfNetPrefixStatus     INTEGER
        }

atmfNetPrefixPort OBJECT-TYPE
        SYNTAX  INTEGER (0..2147483647)
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "A unique value which identifies the UNI port for which the network 
		prefix for ATM addresses is in effect.  The value of 0 has the special 
		meaning of identifying the local UNI."
        ::= { atmfNetPrefixEntry 1 }

atmfNetPrefixPrefix  OBJECT-TYPE
        SYNTAX  NetPrefix
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "The network prefix for ATM addresses which is in effect on the 
		user-side of the ATM UNI port."
        ::= { atmfNetPrefixEntry 2 }

atmfNetPrefixStatus  OBJECT-TYPE
        SYNTAX  INTEGER { 
			valid(1), 
			invalid(2) 
		}
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
        	"An indication of the validity of the network prefix for ATM addresses 
		on the user-side of the UNI port.  To configure a new network prefix in 
		this table, the network-side must set the appropriate instance of this 
		object to the value valid(1).
		To delete an existing network prefix in this table, the network-side
		must set the appropriate instance of this object to the value invalid(2).

	        If circumstances occur on the user-side which cause a prefix to become 
		invalid, the user-side modifies the value of the appropriate instance of 
		this object to invalid(2).

	        Whenever the value of this object for a particular prefix becomes invalid(2), 
		the conceptual row for that prefix may be removed from the table at anytime, 
		either immediately or subsequently."
        ::= { atmfNetPrefixEntry 3 }

------------------------------------------------------------------------
--                     The Address Table
-- 
-- The Address Table is implemented by the UNI Management Entity
-- on the network-side of the UNI

atmfAddressTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AtmfAddressEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "A table implemented by the network-side of an ATM UNI port, containing the
		ATM-layer addresses in effect on the user-side of the UNI."
        ::= { atmfAddressGroup 1 }

atmfAddressEntry OBJECT-TYPE
        SYNTAX  AtmfAddressEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "Information about a single ATM-layer address in effect on the user-side 
		of a UNI port.  Note that the index variable atmfAddressAtmAddress is a 
		variable-length string, and as such the rule for variable-length strings 
		in section 4.1.6 of RFC 1212 applies."
        INDEX   { atmfAddressPort, atmfAddressAtmAddress }
        ::= { atmfAddressTable 1 }

AtmfAddressEntry ::=
        SEQUENCE {
                atmfAddressPort         INTEGER,
                atmfAddressAtmAddress   AtmAddress2,
                atmfAddressStatus       INTEGER
        }

atmfAddressPort OBJECT-TYPE
        SYNTAX  INTEGER (0..2147483647)
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "A unique value which identifies the UNI port for which the ATM address is 
		in effect.  The value of 0 has the special meaning of identifying the local 
		UNI."
        ::= { atmfAddressEntry 1 }

atmfAddressAtmAddress  OBJECT-TYPE
        SYNTAX  AtmAddress2
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
	        "The ATM address which is in effect on the user-side of the ATM UNI port."
        ::= { atmfAddressEntry 2 }

atmfAddressStatus  OBJECT-TYPE
        SYNTAX  INTEGER { 
			valid(1), 
			invalid(2) 
		}
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
	        "An indication of the validity of the ATM address at the user-side of
		the UNI port.  To configure a new address in this table, the user-side 
		must set the appropriate instance of this object to the value valid(1).  
		To delete an existing address in this able, the user-side must set the 
		appropriate instance of this object to the value invalid(2).

	        If circumstances occur on the network-side which cause an address to 
		become invalid, the network-side modifies the value of the appropriate
		instance of this object to invalid(2).

	        Whenever the value of this object for a particular address becomes 
		invalid(2), the conceptual row for that address may be removed from the 
		table at anytime, either immediately or subsequently."
        ::= { atmfAddressEntry 3 }

END