path: root/MIBS/adva/F3-ERP-MIB

F3-ERP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP 
             FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32
             FROM SNMPv2-SMI
    TruthValue, RowStatus, StorageType, DisplayString,
    MacAddress, VariablePointer, TEXTUAL-CONVENTION
             FROM SNMPv2-TC
    neIndex
             FROM CM-ENTITY-MIB
    fsp150cm
             FROM  ADVA-MIB 
    AdminState, OperationalState, SecondaryState,
    VlanId, VlanPriority, VlanEthertype
             FROM  CM-COMMON-MIB
    Dot1agCfmMDLevel 
             FROM  IEEE8021-CFM-MIB
    CmProtUnitType, CmProtUnitState
             FROM  CM-PROTECTION-MIB;

f3ErpMIB MODULE-IDENTITY
    LAST-UPDATED        "201209130000Z"
    ORGANIZATION    "ADVA Optical Networking"
    CONTACT-INFO
            "        Jakub Zalewski
                     ADVA Optical Networking, Inc.
                Tel: +48 58 7716 411
             E-mail: jzalewski@advaoptical.com
             Postal: ul. Slaska 35/37
                     81-310 Gdynia, Poland"
    DESCRIPTION
            "This module defines the G.8032 Ethernet Ring Protection MIB definitions 
             used by the F3 (FSP150CM/CC) product lines.  
             Copyright (C) ADVA Optical Networking."
    REVISION        "201209130000Z"
    DESCRIPTION
        "
         Notes from release 201209130000Z,
         (1)MIB version ready for release FSP150CC 5.6CC." 

    ::= {fsp150cm 25}    


--
-- Textual Conventions
--
G8032Version ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Version of G.8032 ERP protocol"
    SYNTAX       INTEGER {
                   v1 (1),
                   v2 (2)
                 }

RPLRole ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Ring Protocol Link role"
    SYNTAX       INTEGER {
                   none (1),
                   neighbor (2),
                   owner (3)
                 }

RingPortStatus ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Status of Ring Port"
    SYNTAX       INTEGER {
                   unblocked (1),
                   unblockedSF (2),
                   unblockedSD (3),
                   blockedRPL (4),
                   blockedSF (5),
                   blockedSD (6),
                   blockedMS (7),
                   blockedFS (8),
                   blockedPending (9),
                   subringInterConnect (10),
                   subringInterConnectSF (11)
                 }

RingNodeState ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "State of Ring Port"
    SYNTAX       INTEGER {
                   idle (1),
                   protection (2),
                   manual (3),
                   forced (4),
                   pending (5)
                 }

RAPSRequest ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Ring Automatic Protection Switch Request"
    SYNTAX       INTEGER {
                   noRequest (1),
                   manual (2),
                   forced (3),
                   signailFail (4),
                   signailDegrade (5),
                   notApplicable (6)
                 }

ERPGroupAction ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "User action initiated on ERP group"
    SYNTAX       INTEGER {
                   noAction (1),
                   forcedSwitch (2),
                   manualSwitch (3),
                   clearSwitch (4),
                   resetStats (5)
                 }

RapsInterconnectionNode ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Role of the sub-ring interconnection node"
    SYNTAX       INTEGER {
                   none (1),
                   primary (2),
                   secondary (3)
                 }

RapsMultipleFailure ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Indicates the interconnection node that has to perform the
         Manual Switch for minimizing interconnected ring segmentation"
    SYNTAX       INTEGER {
                   disabled (1),
                   primary (2),
                   secondary (3)
                 }
                 
-- 
-- OID definitions
-- 
f3ErpConfigObjects      OBJECT IDENTIFIER ::= {f3ErpMIB 1}
f3ErpStatsObjects       OBJECT IDENTIFIER ::= {f3ErpMIB 2}
f3ErpConformance        OBJECT IDENTIFIER ::= {f3ErpMIB 3}

--
--  Ethernet Ring Protection Group
--
f3ErpGroupTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3ErpGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to Ethernet Ring Protection 
             instance for configuration purposes."
    ::= { f3ErpConfigObjects 1 }

f3ErpGroupEntry OBJECT-TYPE
    SYNTAX      F3ErpGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3ErpGroupTable."
    INDEX { neIndex, f3ErpGroupIndex }
    ::= { f3ErpGroupTable 1 }

F3ErpGroupEntry ::= SEQUENCE {
    f3ErpGroupIndex                           Integer32,
    f3ErpGroupAdminState                      AdminState,
    f3ErpGroupOperationalState                OperationalState,
    f3ErpGroupSecondaryState                  SecondaryState,
    f3ErpGroupRapsRingId                      Integer32,
    f3ErpGroupRapsNodeId                      MacAddress,
    f3ErpGroupRapsVlanId                      VlanId,
    f3ErpGroupRapsVlanPrio                    VlanPriority,
    f3ErpGroupRapsVlanEtherType               Unsigned32,
    f3ErpGroupRapsMdLevel                     Dot1agCfmMDLevel, 
    f3ErpGroupCompatibleVersion               G8032Version, 
    f3ErpGroupRevertive                       TruthValue, 
    f3ErpGroupSubRingWithoutVirtChan          TruthValue,  
    f3ErpGroupGuardTime                       Integer32,  
    f3ErpGroupWaitToRestore                   Integer32,  
    f3ErpGroupHoldOffTime                     Integer32,  
    f3ErpGroupRingPort0                       VariablePointer,  
    f3ErpGroupRingPort0MEP                    VariablePointer,  
    f3ErpGroupRingPort0Role                   RPLRole,  
    f3ErpGroupRingPort1                       VariablePointer,  
    f3ErpGroupRingPort1MEP                    VariablePointer,  
    f3ErpGroupRingPort1Role                   RPLRole,  
    f3ErpGroupProtectMgmtTunnel               TruthValue,  
    f3ErpGroupNodeState                       RingNodeState,  
    f3ErpGroupWTRRemainingTime                Integer32,  
    f3ErpGroupTxRapsRequest                   RAPSRequest,  
    f3ErpGroupTxRapsRplBlocked                TruthValue,
    f3ErpGroupTxRapsDNF                       TruthValue,  
    f3ErpGroupTxRapsBPR                       Integer32,  
    f3ErpGroupAction                          ERPGroupAction,   
    f3ErpGroupActionObject                    VariablePointer,   
    f3ErpGroupUserLabel                       DisplayString,
    f3ErpGroupStorageType                     StorageType,
    f3ErpGroupRowStatus                       RowStatus,
    f3ErpGroupInterconnectionErp              VariablePointer,
    f3ErpGroupInterconnectPropagateTc         TruthValue,
    f3ErpGroupRapsVirtualChannelMep           VariablePointer,
    f3ErpGroupMaxFpNum                        Integer32,
    f3ErpGroupRapsInterconnectionNode         RapsInterconnectionNode,
    f3ErpGroupRapsMultipleFailure             RapsMultipleFailure
}

f3ErpGroupIndex OBJECT-TYPE
    SYNTAX        Integer32 (1..255)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
         "An integer index value used to uniquely identify
             this ERP Group within Network Element."
    ::= { f3ErpGroupEntry 1 }

f3ErpGroupAdminState OBJECT-TYPE
    SYNTAX        AdminState
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Administrative State of this ERP instance. 
          INSERVICE is normal operation. 
          MANAGEMENT suppresses alarms. 
          DISABLED initiates blocking on ring port 0 and stops all RAPS processing 
          and forwarding.
          The ERP instance must be in the MANAGEMENT or DISABLED state when modifying 
          the following ERP instance attributes: rapsVID, ringPort0, ringPort1, 
          ringPort0RPLRole, ringPort1RPLRole,  rapsRingId, rapsMdLevel, 
          subRingWithoutVirtualChannel, compatibleVersion."
    ::= { f3ErpGroupEntry 2 }

f3ErpGroupOperationalState OBJECT-TYPE
    SYNTAX        OperationalState
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Operational State of this ERP instance.  The ERP operational state is 
          outage when there is an equipment failure causing the ERP to be non-functional;
          otherwise the operational state is normal."
    ::= { f3ErpGroupEntry 3 }

f3ErpGroupSecondaryState OBJECT-TYPE
    SYNTAX        SecondaryState
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Secondary State of this ERP instance. The ERP secondary state is 
          supporting entity outage (SGEO) when there is an equipment failure 
          causing the ERP to be non-functional; otherwise the sescondary state is active."
    ::= { f3ErpGroupEntry 4 }

f3ErpGroupRapsRingId OBJECT-TYPE
    SYNTAX        Integer32 (1..255)
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "Ring ID of this ERP instance. The value is used in the destination 
         address of the RAPS PDU."
    ::= { f3ErpGroupEntry 5 }

f3ErpGroupRapsNodeId OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "Node ID of the local system for this ERP instance. 
         The value is used as the Node ID in the RAPS PDU."
    ::= { f3ErpGroupEntry 6 }

f3ErpGroupRapsVlanId OBJECT-TYPE
    SYNTAX        VlanId
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "VID value of the VLAN tag for transmitted/received RAPS PDUs for this 
          ERP instance."
    ::= { f3ErpGroupEntry 7 }

f3ErpGroupRapsVlanPrio OBJECT-TYPE
    SYNTAX        VlanPriority
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "P-bit value of the VLAN tag for transmitted RAPS PDUs for this ERP instance." 
    ::= { f3ErpGroupEntry 8 }

f3ErpGroupRapsVlanEtherType OBJECT-TYPE
    SYNTAX       Unsigned32 
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "VID value of the VLAN tag for transmitted/received RAPS PDUs for this 
          ERP instance."
    ::= { f3ErpGroupEntry 9 }

f3ErpGroupRapsMdLevel OBJECT-TYPE
    SYNTAX        Dot1agCfmMDLevel
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "MD (or MEG) level of the transmitted/received RAPS PDUs for this ERP instance."
    ::= { f3ErpGroupEntry 10 }

f3ErpGroupCompatibleVersion  OBJECT-TYPE
    SYNTAX        G8032Version
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
         "Indicates compatability with a version of G.8032 for this ring instance."
    ::= { f3ErpGroupEntry 11 }

f3ErpGroupRevertive OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "Revertive control for the ring. Only applicable on the RPL Owner node."
    ::= { f3ErpGroupEntry 12 }

f3ErpGroupSubRingWithoutVirtChan OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Indicates whether R-APS channel forms a closed loop around the ring
          ENABLED: no RAPS Virtual Channel (i.e., open ring)
          DISABLED: RAPS forms a closed loop (major ring or sub-ring with virtual 
                    channel)"
    ::= { f3ErpGroupEntry 13 }

f3ErpGroupGuardTime  OBJECT-TYPE
    SYNTAX        Integer32 (10..2000)
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The Guard Time value in milliseconds for this ERP instance."
    ::= { f3ErpGroupEntry 14 }

f3ErpGroupWaitToRestore OBJECT-TYPE
    SYNTAX        Integer32 (1..12)
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The Wait-to-Restore time value in minutes for this ERP instance."
    ::= { f3ErpGroupEntry 15 }

f3ErpGroupHoldOffTime OBJECT-TYPE
    SYNTAX        Integer32 (0..10000)
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The Hold-off Time value in milliseconds for this ERP instance."
    ::= { f3ErpGroupEntry 16 }

f3ErpGroupRingPort0 OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Pointer to a Port instance which represents Ring Port 0 in the ERP Group.
          The pointer must be set to cmEthernetAccPortIndex instance if the Ring 
          Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port 
          is a Network Port."
    ::= { f3ErpGroupEntry 17 }

f3ErpGroupRingPort0MEP OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Pointer to a CFM MEP instance monitoring Ring Port 0 for this ERP instance.
          The pointer must be set to dot1agCfmMepIfIndex instance."
    ::= { f3ErpGroupEntry 18 }

f3ErpGroupRingPort0Role OBJECT-TYPE
    SYNTAX        RPLRole
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "RPL Role of Ring Port 0. When f3ErpGroupRingPort1Role is NEIGHBOR or OWNER, 
          this value MUST be NONE."
    ::= { f3ErpGroupEntry 19 }

f3ErpGroupRingPort1 OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Pointer to a Port instance which represents Ring Port 1 in the ERP Group.
          The pointer must be set to cmEthernetAccPortIndex instance if the Ring 
          Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port 
          is a Network Port."
    ::= { f3ErpGroupEntry 20 }

f3ErpGroupRingPort1MEP OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Pointer to a CFM MEP instance monitoring Ring Port 1 for this ERP instance.
          The pointer must be set to dot1agCfmMepIfIndex instance."
    ::= { f3ErpGroupEntry 21 }

f3ErpGroupRingPort1Role OBJECT-TYPE
    SYNTAX        RPLRole
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "RPL Role of Ring Port 1. When f3ErpGroupRingPort0Role is NEIGHBOR or OWNER, 
          this value MUST be NONE."
    ::= { f3ErpGroupEntry 22 }

f3ErpGroupProtectMgmtTunnel OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Indication of whether this ERP instance is protecting management Tunnels 
          on the ring ports."
    ::= { f3ErpGroupEntry 23 }

f3ErpGroupNodeState OBJECT-TYPE
    SYNTAX        RingNodeState
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "ERP Node state."
    ::= { f3ErpGroupEntry 24 }

f3ErpGroupWTRRemainingTime OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "The time remaining (in seconds) for this ERP instance to wait to restore."
    ::= { f3ErpGroupEntry 25 }

f3ErpGroupTxRapsRequest OBJECT-TYPE
    SYNTAX        RAPSRequest
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Request/State field fo the last generated R-APS message on the Ring Ports. 
          Valid when the node is blocking."
    ::= { f3ErpGroupEntry 26 }

f3ErpGroupTxRapsRplBlocked OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "RPL Blocked field fo the last generated R-APS message on the Ring Ports. 
          Valid when the node is blocking."
    ::= { f3ErpGroupEntry 27 }

f3ErpGroupTxRapsDNF OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Do Not Flush field fo the last generated R-APS message on the Ring Ports. 
          Valid when the node is blocking."
    ::= { f3ErpGroupEntry 28 }
 
f3ErpGroupTxRapsBPR OBJECT-TYPE 
    SYNTAX        Integer32 (0..1)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Blocked Port Reference field fo the last generated R-APS message on the 
          Ring Ports. Valid when the node is blocking."
    ::= { f3ErpGroupEntry 29 }

f3ErpGroupAction OBJECT-TYPE
    SYNTAX        ERPGroupAction
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
         "User action performed on this ERP instance.
          For manualSwitch and forcedSwitch actions f3ErpGroupActionObject has to
          be specified prior to settng this object."
    ::= { f3ErpGroupEntry 30 }

f3ErpGroupActionObject OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
         "Object identfier used to specify the OID of a port on which 
          f3ErpGroupAction should occur. Applicable for manualSwitch and forcedSwitch
          actions.
          The pointer must be set to cmEthernetAccPortIndex instance if the Ring 
          Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port 
          a Network Port."
    ::= { f3ErpGroupEntry 31}

f3ErpGroupUserLabel OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..64))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "User Label associated with the ERP Group."
     ::= { f3ErpGroupEntry 32 }

f3ErpGroupStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { f3ErpGroupEntry 33 }

f3ErpGroupRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The status of this row.  An entry MUST NOT exist in the 
            active state unless all objects in the entry have an 
            appropriate value, as described
            in the description clause for each writable object.

            The values of f3ErpGroupRowStatus supported are
            createAndGo(4) and destroy(6).  All mandatory attributes
            must be specified in a single SNMP SET request with
            neRowStatus value as createAndGo(4).
            Upon successful row creation, this object has a
            value of active(1).

            The f3ErpGroupRowStatus object may be modified if
            the associated instance of this object is equal to active(1)."
    ::= { f3ErpGroupEntry 34 }

f3ErpGroupInterconnectionErp OBJECT-TYPE
    SYNTAX     VariablePointer
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Oid of the associated Loop Avoidance instance at an interconnect 
            node. Current only ERP instances are supported for this; 
            in the future, STP instances may be as well."
    ::= { f3ErpGroupEntry 35 }

f3ErpGroupInterconnectPropagateTc OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "Allows for propgation of Topology Change information in the 
            protocol of the associated Loop Avoidance instance at an 
            interconnect node. Derived from  MI_RAPS_Propagate_TC in [G8032]"
    ::= { f3ErpGroupEntry 36 }

f3ErpGroupRapsVirtualChannelMep OBJECT-TYPE
    SYNTAX     VariablePointer
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "ID of MEP monitoring an UP MEP Monitoring the R-APS VID."
    ::= { f3ErpGroupEntry 37 }

f3ErpGroupMaxFpNum OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The max number of flow point which the erp supports.
             This object is not supported - setting its value will 
             not have any effect on the System."

    ::= { f3ErpGroupEntry 38 }

f3ErpGroupRapsInterconnectionNode OBJECT-TYPE
    SYNTAX        RapsInterconnectionNode
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Type of sub-ring interconnection node. PRIMARY/SECONDARY role
          for minimizing interconnected ring segmentation."
    ::= { f3ErpGroupEntry 39 }

f3ErpGroupRapsMultipleFailure OBJECT-TYPE
    SYNTAX        RapsMultipleFailure
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "Sub-ring interconnection node that is designated to perform the Manual
          Switch for minimizing interconnected ring segmentation."
    ::= { f3ErpGroupEntry 40 }


--
--  Ethernet Ring Protection Protected Flows
--
f3ErpGroupProtectedFlowTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3ErpGroupProtectedFlowEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to Flows which are protected by 
             an ERP group instance. These flows can be access flows or multipoint
             flows depending on the traffic model of the ERP Ring Port."
    ::= { f3ErpConfigObjects 2 }

f3ErpGroupProtectedFlowEntry OBJECT-TYPE
    SYNTAX      F3ErpGroupProtectedFlowEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3ErpGroupProtectedFlowsTable."
    INDEX { neIndex, f3ErpGroupIndex, f3ErpGroupProtectedFlow } 
    ::= { f3ErpGroupProtectedFlowTable 1 }

F3ErpGroupProtectedFlowEntry ::= SEQUENCE {
    f3ErpGroupProtectedFlow                   VariablePointer
}

f3ErpGroupProtectedFlow OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Pointer to a Flow instance which is protected by an ERP instance.
          The pointer must be set to cmFlowIndex or cmMPFlowIndex instance."
    ::= { f3ErpGroupProtectedFlowEntry 1 }

--
--  Ethernet Ring Protection Unit
--
f3ErpUnitTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3ErpUnitEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to Ethernet Ring Protection Unit"
    ::= { f3ErpConfigObjects 3 }

f3ErpUnitEntry OBJECT-TYPE
    SYNTAX      F3ErpUnitEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3ErpUnitTable."
    INDEX { neIndex, f3ErpGroupIndex, f3ErpUnitIndex }
    ::= { f3ErpUnitTable 1 }

F3ErpUnitEntry ::= SEQUENCE {
    f3ErpUnitIndex                           Integer32,
    f3ErpUnitPort                            VariablePointer,
    f3ErpUnitPortMEP                         VariablePointer,  
    f3ErpUnitPortRole                        RPLRole,  
    f3ErpUnitPortStatus                      RingPortStatus,  
    f3ErpUnitPortRxRapsRequest               RAPSRequest,  
    f3ErpUnitPortRxRapsRplBlocked            TruthValue,
    f3ErpUnitPortRxRapsDNF                   TruthValue,  
    f3ErpUnitPortRxRapsBPR                   Integer32,  
    f3ErpUnitPortRxRapsNodeId                MacAddress,
    f3ErpUnitPortRapsFp                      VariablePointer  
}
 
f3ErpUnitIndex OBJECT-TYPE
    SYNTAX        Integer32 (1..2)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
         "An integer index value used to uniquely identify
             this ERP Unit within ERP Group."
    ::= { f3ErpUnitEntry 1 }

f3ErpUnitPort OBJECT-TYPE
    SYNTAX     VariablePointer 
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "ERP Unit's points to a facility (port). 
          This object represents the facility Network Element port."
     ::= { f3ErpUnitEntry 2 }

f3ErpUnitPortMEP OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Pointer to a CFM MEP instance monitoring Ring Port."
    ::= { f3ErpUnitEntry 3 }

f3ErpUnitPortRole OBJECT-TYPE
    SYNTAX        RPLRole
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "RPL Role of Ring Port 1. When f3ErpGroupRingPort2Role is NEIGHBOR or OWNER, 
          this value MUST be NONE."
    ::= { f3ErpUnitEntry 4 }

f3ErpUnitPortStatus OBJECT-TYPE
    SYNTAX        RingPortStatus
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Status of Ring Port."
    ::= { f3ErpUnitEntry 5 }

f3ErpUnitPortRxRapsRequest OBJECT-TYPE
    SYNTAX        RAPSRequest
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Request/State field fo the last received R-APS message on Ring Port."
    ::= { f3ErpUnitEntry 6 }

f3ErpUnitPortRxRapsRplBlocked OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "RPL Blocked  field fo the last received R-APS message on Ring Port."
    ::= { f3ErpUnitEntry 7 }

f3ErpUnitPortRxRapsDNF OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Do Not Flush field fo the last received R-APS message on Ring Port."
    ::= { f3ErpUnitEntry 8 }
 
f3ErpUnitPortRxRapsBPR OBJECT-TYPE 
    SYNTAX        Integer32 (0..1)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Blocked Port Reference field fo the last received R-APS message on Ring Port."
    ::= { f3ErpUnitEntry 9 }

f3ErpUnitPortRxRapsNodeId OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Node ID of the local system for this ERP instance. 
         The value is used as the Node ID in the RAPS PDU."
    ::= { f3ErpUnitEntry 10 }

f3ErpUnitPortRapsFp OBJECT-TYPE
    SYNTAX        VariablePointer
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Pointer to a R-APS FlowPoint associated with this Ring Port."
    ::= { f3ErpUnitEntry 11 }

--
--  Ethernet Ring Protection Unit Stats
--
f3ErpUnitStatsTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3ErpUnitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to Ethernet Ring Protection Unit Statistics"
    ::= { f3ErpStatsObjects 1 }

f3ErpUnitStatsEntry OBJECT-TYPE
    SYNTAX      F3ErpUnitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3ErpUnitStatsTable."
    INDEX { neIndex, f3ErpGroupIndex, f3ErpUnitIndex }
    ::= { f3ErpUnitStatsTable 1 }

F3ErpUnitStatsEntry ::= SEQUENCE {
    f3ErpUnitNumBlockedStateTrans                           Unsigned32,
    f3ErpUnitRapsPDUsTx                                     Unsigned32,
    f3ErpUnitRapsPDUsRx                                     Unsigned32,
    f3ErpUnitRapsPDUsDiscarded                              Unsigned32,
    f3ErpUnitRapsNoReqPDUsTx                                Unsigned32,
    f3ErpUnitRapsNoReqRBPDUsTx                              Unsigned32,
    f3ErpUnitRapsSignalFailPDUsTx                           Unsigned32,
    f3ErpUnitRapsManualSwitchPDUsTx                         Unsigned32,
    f3ErpUnitRapsForcedSwitchPDUsTx                         Unsigned32,
    f3ErpUnitRapsEventPDUsTx                                Unsigned32,
    f3ErpUnitRapsNoReqPDUsRx                                Unsigned32,
    f3ErpUnitRapsNoReqRBPDUsRx                              Unsigned32,
    f3ErpUnitRapsSignalFailPDUsRx                           Unsigned32,
    f3ErpUnitRapsManualSwitchPDUsRx                         Unsigned32,
    f3ErpUnitRapsForcedSwitchPDUsRx                         Unsigned32,
    f3ErpUnitRapsEventPDUsRx                                Unsigned32,
    f3ErpUnitRapsInvalidOamVersionPDUsRx                    Unsigned32,
    f3ErpUnitRapsRsvdRequestPDUsRx                          Unsigned32,
    f3ErpUnitRapsRsvdEventSubcode                           Unsigned32
}

f3ErpUnitNumBlockedStateTrans OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Total number of transitions into a blocking state for Ring Port."
    ::= { f3ErpUnitStatsEntry 1 }

f3ErpUnitRapsPDUsTx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of all RAPS PDUs transmitted on the port where the PDU contains 
             the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 2 }

f3ErpUnitRapsPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of all RAPS PDUs received on the port where the PDU contains 
             the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 3 }

f3ErpUnitRapsPDUsDiscarded OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of all RAPS PDUs received on the port and discarded where the PDU 
             contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 4 }

f3ErpUnitRapsNoReqPDUsTx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of No Request RAPS PDUs transmitted on the port where the PDU 
             contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 5 }

f3ErpUnitRapsNoReqRBPDUsTx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of No Request, RPL Blocked RAPS PDUs transmitted on the port where 
             the PDU contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 6 }

f3ErpUnitRapsSignalFailPDUsTx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Signal Fail RAPS PDUs transmitted on the port where the 
             PDU contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 7 }

f3ErpUnitRapsManualSwitchPDUsTx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Manual Switch RAPS PDUs transmitted on the port where the 
             PDU contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 8 }

f3ErpUnitRapsForcedSwitchPDUsTx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Forced Switch RAPS PDUs transmitted on the port where the 
             PDU contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 9 }

f3ErpUnitRapsEventPDUsTx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Event RAPS PDUs transmitted on the port where the PDU contains 
             the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 10 }

f3ErpUnitRapsNoReqPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of No Request RAPS PDUs received on the port where the PDU 
             contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 11 }

f3ErpUnitRapsNoReqRBPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of No Request, RPL Blocked RAPS PDUs received on the port where 
             the PDU contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 12 }

f3ErpUnitRapsSignalFailPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Signal Fail RAPS PDUs received on the port where the PDU 
             contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 13 }

f3ErpUnitRapsManualSwitchPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Manual Switch RAPS PDUs received on the port where the PDU 
             contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 14 }

f3ErpUnitRapsForcedSwitchPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Forced Switch RAPS PDUs received on the port where the PDU 
             contains the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 15 }

f3ErpUnitRapsEventPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of Event RAPS PDUs received on the port where the PDU contains 
             the MEG Level, Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 16 }

f3ErpUnitRapsInvalidOamVersionPDUsRx OBJECT-TYPE 
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of OAM PDUs received on the port where the PDU contains the MEG Level, 
             Ring ID and VID for the ERP instance and an OAM Version field other 
             than 0 or 1."
    ::= { f3ErpUnitStatsEntry 17 }

f3ErpUnitRapsRsvdRequestPDUsRx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of OAM PDUs received on the port where the PDU contains the MEG Level, 
             Ring ID and VID for the ERP instance."
    ::= { f3ErpUnitStatsEntry 18 }

f3ErpUnitRapsRsvdEventSubcode OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Count of OAM PDUs received on the port where the PDU contains the MEG Level, 
             Ring ID and VID for the ERP instance, an OAM Opcode field of 40 (R-APS), 
             a request/state value of 14 (EVT) and a sub-code value that is not 0." 
    ::= { f3ErpUnitStatsEntry 19 }

--
-- Conformance
--
f3ErpCompliances OBJECT IDENTIFIER ::= {f3ErpConformance 1}
f3ErpGroups      OBJECT IDENTIFIER ::= {f3ErpConformance 2}

f3ErpCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for conformance to the F3-ERP-MIB compilance."
    MODULE  -- this module
        MANDATORY-GROUPS {
              f3ErpGroupGroup, f3ErpUnitGroup, f3ErpUnitStatsGroup
        }
    ::= { f3ErpCompliances 1 }

f3ErpGroupGroup OBJECT-GROUP
    OBJECTS {
       f3ErpGroupAdminState,
       f3ErpGroupOperationalState,
       f3ErpGroupSecondaryState,
       f3ErpGroupRapsRingId,
       f3ErpGroupRapsNodeId,
       f3ErpGroupRapsVlanId,
       f3ErpGroupRapsVlanPrio,
       f3ErpGroupRapsVlanEtherType,
       f3ErpGroupRapsMdLevel, 
       f3ErpGroupCompatibleVersion, 
       f3ErpGroupRevertive, 
       f3ErpGroupSubRingWithoutVirtChan,  
       f3ErpGroupGuardTime,  
       f3ErpGroupWaitToRestore,  
       f3ErpGroupHoldOffTime,  
       f3ErpGroupRingPort0,  
       f3ErpGroupRingPort0MEP,  
       f3ErpGroupRingPort0Role,  
       f3ErpGroupRingPort1,  
       f3ErpGroupRingPort1MEP,  
       f3ErpGroupRingPort1Role,  
       f3ErpGroupProtectMgmtTunnel,  
       f3ErpGroupNodeState,  
       f3ErpGroupWTRRemainingTime,  
       f3ErpGroupTxRapsRequest,  
       f3ErpGroupTxRapsRplBlocked,
       f3ErpGroupTxRapsDNF,  
       f3ErpGroupTxRapsBPR,  
       f3ErpGroupAction,   
       f3ErpGroupActionObject,   
       f3ErpGroupUserLabel,
       f3ErpGroupStorageType,
       f3ErpGroupRowStatus,
       f3ErpGroupProtectedFlow,
       f3ErpGroupInterconnectionErp,
       f3ErpGroupInterconnectPropagateTc,
       f3ErpGroupRapsVirtualChannelMep,
       f3ErpGroupMaxFpNum,
       f3ErpGroupRapsInterconnectionNode,
       f3ErpGroupRapsMultipleFailure
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage the ERP Group."
    ::= { f3ErpGroups 1 }

f3ErpUnitGroup OBJECT-GROUP
    OBJECTS {
       f3ErpUnitPort,
       f3ErpUnitPortMEP,  
       f3ErpUnitPortRole,  
       f3ErpUnitPortStatus,  
       f3ErpUnitPortRxRapsRequest,  
       f3ErpUnitPortRxRapsRplBlocked,
       f3ErpUnitPortRxRapsDNF,  
       f3ErpUnitPortRxRapsBPR,  
       f3ErpUnitPortRxRapsNodeId,
       f3ErpUnitPortRapsFp
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage the ERP Unit."
    ::= { f3ErpGroups 2 }

f3ErpUnitStatsGroup OBJECT-GROUP
    OBJECTS {
       f3ErpUnitNumBlockedStateTrans,
       f3ErpUnitRapsPDUsTx,
       f3ErpUnitRapsPDUsRx,
       f3ErpUnitRapsPDUsDiscarded,
       f3ErpUnitRapsNoReqPDUsTx,
       f3ErpUnitRapsNoReqRBPDUsTx,
       f3ErpUnitRapsSignalFailPDUsTx,
       f3ErpUnitRapsManualSwitchPDUsTx,
       f3ErpUnitRapsForcedSwitchPDUsTx,
       f3ErpUnitRapsEventPDUsTx,
       f3ErpUnitRapsNoReqPDUsRx,
       f3ErpUnitRapsNoReqRBPDUsRx,
       f3ErpUnitRapsSignalFailPDUsRx,
       f3ErpUnitRapsManualSwitchPDUsRx,
       f3ErpUnitRapsForcedSwitchPDUsRx,
       f3ErpUnitRapsEventPDUsRx,
       f3ErpUnitRapsInvalidOamVersionPDUsRx,
       f3ErpUnitRapsRsvdRequestPDUsRx,
       f3ErpUnitRapsRsvdEventSubcode
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage the ERP Unit Statistics."
    ::= { f3ErpGroups 3 }

END