path: root/MIBS/aerohive/AH_TRAP_MIB

--
-- Copyright (c) 2006-2013, Aerohive Networks, Inc
-- All rights reserved.
                                                                                                
AH_TRAP_MIB DEFINITIONS ::= BEGIN

--
-- Imports
--

IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE
		  FROM SNMPv2-SMI
        DisplayString
	  	  FROM SNMPv2-TC
        ahAPTrap, AhString, AhNodeID, AhMACProtocol FROM AH-SMI-MIB;
	   
--
-- Module Identity
--


AhAuthenticationMethod ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION   "Authentication method supported by the HiveAP"
   SYNTAX        INTEGER {
   	                   cwp          (0), 
	                   open         (1), 
	                   wep-open     (2),                   
	                   wep-shared   (3),  
	                   wpa-psk      (4),
	                   wpa2-psk     (5),
	                   wpa-8021x    (6),
	                   wpa2-8021X   (7),                  
	                   wpa-auto-psk   (8),
	                   wpa-auto-8021x (9),
	                   dynamic-wep	(10),
	                   8021x        (11)                
                 }

AhEncrytionMethod ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION   "Encryption method supported by the HiveAP"
   SYNTAX        INTEGER {
                   AES        (0),  
                   TKIP       (1), 
                   WEP        (2),
                   Non        (3)
                 }


ahTrapModule MODULE-IDENTITY
         LAST-UPDATED "201608310000Z"  -- Aug 31, 2016
         ORGANIZATION "Aerohive Networks, Inc."
         CONTACT-INFO "See AH-SMI-MIB for information."
         DESCRIPTION
           "This is the MIB module for access point trap definitions 
	   for Aerohive Networks Inc."

         ::= {  ahAPTrap  1  }

ahNotificationVarBind  OBJECT IDENTIFIER  ::= { ahAPTrap 2 }

AhState ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION   "It defines the state for interfaces."
   SYNTAX        INTEGER {
                   ahUp     (1), -- Interface up
                   ahDown   (2)  -- Interface down
                 }

AhProbableCause ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION   "It defines the probable cause for a problem on the HiveAP."
   SYNTAX        INTEGER {
                   ahClear                  (0),
                   ahUnknown                (1),
                   ahFlashFailure           (2), 
                   ahFanFailure             (3),
                   ahPowerSupplyFailure     (4),
                   ahSoftwareUpgradeFailure (5),
                   ahRadioFailure           (6),
                   ahConfFailure            (7)                   
                 }

--
-- Trap Definitions
--
  
ahFailureTrap  NOTIFICATION-TYPE
	OBJECTS         { ahAPId,			
                          ahAPName,
                          ahObjectName,     -- Failed object name
                          ahSeverity,
			  ahProbableCause,
			  ahFailureSet,
                          ahCode,
                          ahTrapDesc   }
	STATUS          current
	DESCRIPTION     "This event is generated for any equipment or software failures. 
                         "
	::= {  ahTrapModule 1 }

ahThresholdCrossingEvent  NOTIFICATION-TYPE
        OBJECTS         { ahAPId,
                          ahAPName,
                          ahObjectName,         -- Threshold name
                          ahCurValue,
                          ahThresholdHigh,
                          ahThresholdLow,
                          ahCode,
                          ahTrapDesc   }
	STATUS          current
	DESCRIPTION     "This event is generated whenever a threshold is crossed for the first time."
	::= { ahTrapModule 2 }

ahStateChangeEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,
                          ahAPName,
                          ahObjectName,        -- The object changes state
                          ahPreviousState,
                          ahCurrentState,
                          ahCode,
                          ahTrapDesc   }
	STATUS          current
	DESCRIPTION     "This event is generated whenever an object state change occurs."
	::= { ahTrapModule 3}


ahConnectionChangeEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,
                          ahAPName,
                          ahObjectName,
                          ahIfIndex,           -- Interface index detecting the client/neighbor
                          ahObjectType,        -- Client connection or neighbor connection
                          ahRemoteId,          -- MAC addr for the client or neighbour
                          ahCurrentState,      -- up, or down.
                          ahSSID,              -- ssid of the client is using if remoteid is a client
                          ahCLientIP,          -- Client IP address if the remote id is a client
                          ahClientHostName,    -- Client Host Name if the remote id is a client
                          ahClientUserName,    -- Client User Name if the remote id is a client
                          ahClientAuthMethod,  -- The authentication method the client uses to communicate with the HiveAP
                          ahClientEncryptionMethod,	-- The encryption method the client uses to communicate with the HiveAP
                          ahClientMACProtocol, 	-- The radio mode the client uses to communicate with the HiveAP
                          ahClientVLAN,			-- The VLAN used by client to communicate with the HiveAP
                          ahClientUserProfId, 	-- The user profile id used by client to communicate with the HiveAP
						  ahClientChannel, 		-- The radio channel used by client to communicate with the HiveAP
						  ahClientCWPUsed,		-- The boolean indicating whether Captive Web Portal is used
                          ahBSSID,				-- Basic Service Set Identifier of the client is using if remoteid is a client.
                          ahAssociationTime,	-- The association time(s) of client connect or disconnect to AP.
                          ahIfName,         	-- The interface name of client connect or disconnect to AP.
                          ahIDPRSSI,            -- RSSI information 
                          ahCode,
                          ahTrapDesc   }
	STATUS          current
	DESCRIPTION     "This event is generated whenever a connection state change
			 occurs. The connection might be between a HiveAP and its client,
			 or between a HiveAP and a neighboring HiveAP."
	::= { ahTrapModule 4}

ahIDPStationEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,              -- reporting APID
                          ahAPName,            -- reporting AP name
                          ahIfIndex,           -- interface index detecting the IDP-AP
                          ahObjectName,
                          ahStationType,       -- indicating whether it is an AP or client PC event
                          ahRemoteId,          -- MAC addr for the IDP-AP
                          ahIDPType,           -- IDP type
                          ahIDPChannel,        -- channel number detected
                          ahIDPRSSI,           -- RSSI information 
                          ahIDPStationData,    -- Station data received (related to the policies)
                          ahIDPCompliance,
                          ahSSID,
                          ahRemoved,
                          ahIDPInNet,
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "This event is generated whenever IDP detects an AP 
			 in its neighborhood. The ahRomoteId indicates the detected AP
			 MAC address, and the ahIDPCompliance indicates conformance of
			 IDP policy this AP satisfies. The ahIDPChannel and ahIDPRSSI
			 indicates the radio channel and Receive Signal Strenth Indication."
	::= { ahTrapModule 5}

ahClientInfoEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,	       -- reporting APID
                          ahAPName,            -- reporting AP name
                          ahObjectName,        -- reporting object name
			  ahSSID,              -- ssid of the client is using
			  ahClientMAC,	       -- Client MAC address
                          ahCLientIP,          -- Client IP address
                          ahClientHostName,    -- Client Host Name
                          ahClientUserName,    -- Client User Name
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "This event is generated whenever HiveAP a new client 
					makes an association and its IP address, hostname, and
					User name is obtained."
	::= { ahTrapModule 6}
	
ahPoEEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,			   -- Reporting APID
                          ahAPName,            -- Reporting HiveAP name
                          ahObjectName,        -- Reporting object name
			  			  ahPowerSrc,          -- Power source: adaptor, PoE
			  			  ahPoEEth0On,		-- On/Off
			  			  ahPoEEth0Pwr,			-- Power level in watts
			  			  ahPoEEth0MaxSpeed,	-- Maximum line speed
			  			  ahPoEWifi0Setting,	-- Auto, 2X3 (xmit/rcv-chain), linkdown
			  			  ahPoEEth1On,		-- On/Off
			  			  ahPoEEth1Pwr,			-- Power level in watts
			  			  ahPoEEth1MaxSpeed,	-- Maximum line speed
			  			  ahPoEWifi1Setting,	-- Auto, 2X3 (xmit/rcv-chain), linkdown
			  			  ahPoEWifi2Setting,	-- Auto, 2X3 (xmit/rcv-chain), linkdown
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "This event is generated whenever a HiveAP (802.11n 
					product line) boots up or changes power levels."
	::= { ahTrapModule 7}
	
ahChannelPowerChangeEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,			   -- Reporting APID
                          ahAPName,            -- Reporting HiveAP name
                          ahObjectName,        -- Reporting object name - interface name
                          ahIfIndex,           -- Interface index reporting the channel/pwr change
                          ahRadioChannel,      -- Current channel number in use
                          ahRadioTxPower,  	   -- Current transmit power in use
                          ahBeaconInterval,    -- Current beacon interval in use
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "This event is generated whenever a HiveAP boots up, 
				or changes channels or power levels."
	::= { ahTrapModule 8}
	

ahIDPMitigateEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,              	-- reporting APID
                          ahAPName,            	-- reporting AP name
                          ahIfIndex,           	-- interface index detecting the IDP-AP
                          ahObjectName,		-- Reporting object name
                          ahRemoteId,          	-- MAC addr for the IDP-Station
			  ahBSSID,		-- Basic Service Set Identifier of the rogue AP
			  ahDiscoverAge,
			  ahUpdateAge,
			  ahRemoved,
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "This event is generated whenever IDP detects an rogue client
			 connect to a rogue AP. The ahRomoteId indicates the detected 
			 Station MAC address. "
	::= { ahTrapModule 9}
	
ahInterferenceMapAlertEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,              	 -- reporting APID
                          ahAPName,            	 -- reporting AP name
                          ahIfIndex,           	 -- interface index
                          ahObjectName,		 -- Reporting object name
                          ahInterferenceThreshold,            --the configured channel utilizations interference threshold
                          ahRunningAverageInterference,       --channel utilizations running average interference
                          ahShortTermInterference,            --channel utilizations short term interference
                          ahSnapshotInterference,             --channel utilizations snapshot interference
                          ahCRCErrRateThreshold,                -- the configured CRC error rate threshold
			  ahCRCErrRate,                         -- CRC error rate
			  ahSeverity,
			  ahFailureSet,                         -- indicate whether this is an interference alert or clear alert
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "For every one minute interval, AP will monitor the interference channel utilizations
	                 (snapshot, short term means average and running average) and CRC error rate 
	                 against their thresholds, if any one of them is above their threshold 
	                 (thresholds are settable by CLI), AP should send HM an interference alert event to HM.
	                 AP will send out clear alert to HM only when: the last short term period��s CRC_error_rate,
	                 means average Interference CU and the last snapshot interference CU are all below their thresholds."
	::= { ahTrapModule 10}

ahBandwidthSentinelEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,              	 -- reporting APID
                          ahAPName,            	 -- reporting AP name
                          ahIfIndex,           	 -- interface index
                          ahObjectName,		 -- Reporting object name
                          ahClientMAC,	         -- Client MAC address
                          ahBandwidthSentinelStatus,       --Bandwidth sentinel status
                          ahGuaranteedBandwidth,           --Configured guaranteed-bandwidth
                          ahActualBandwidth,               --Actual bandwidth usage
                          ahBandwidthSentinelAction,       --Bandwidth sentinel action
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
	                 The ��alert�� trap will serve the purpose to tell HM that the client is violating the bandwidth sentinel,
	                 the ��clear�� trap will clear the previous ��alert�� trap."
	::= { ahTrapModule 11}

ahAlarmMsgMapAlertEvent   NOTIFICATION-TYPE
        OBJECTS         { ahAPId,              	           -- reporting APID
                          ahAPName,            	           -- reporting AP name
                          ahIfIndex,           	           -- the wifi interface index
                          ahObjectName,		           -- Reporting object name
                          ahLevel,           	           -- the level will tell HM whether this is a interface or client level alert
                          ahClientMAC,	                   -- Client MAC address, if it is client level alert type
                          ahSSID,                          -- the Client ssid name, if client level, include the SSID name, interface level, no ssid name
                          ahAlarmAlertType,                -- the CRC error rate, the TX drop/retry rate, the RX rate, Airtime consumption
                          ahThresholdValue,                -- the value of HOS setting
                          ahShortTermValue,                -- the CRC error rate, TX drop/retry rate, RX drop rate percentage of this sampling period
                          ahSnapshotValue,                 -- the CRC error rate, TX drop/retry rate, RX drop rate of snapshort
                          ahFailureSet,                    -- indicate whether this is an alert or clear alert
                          ahCode,
                          ahTrapDesc}
                          
	STATUS          current
	DESCRIPTION     "HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
                         There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; interface level includes all alert type, 
                         the client level includes Tx drop/retry rate, Rx drop Rate; the 'set' alert means there is an alert raised, 
                         with type indicated in the alert type field, the 'clear' alert means the previous alert condition has been cleared."
	::= { ahTrapModule 12}
--
-- Types
--

ahAPId  OBJECT-TYPE
	SYNTAX          AhNodeID
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It is the node ID (MAC address in hexadecimal format) 
			of the HiveAP where the trap is generated. If a HiveAP is 
			configured with 2 hives, the node ID is the first MAC address
			of the management interface."
	::= {ahNotificationVarBind 1} 

ahAPName OBJECT-TYPE
	SYNTAX          AhString
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "The host name of the HiveAP where the trap is generated."
	::= { ahNotificationVarBind 2}

ahSeverity OBJECT-TYPE
	SYNTAX          INTEGER {
                         critical (5),   -- service impact problem
                         major    (4),   -- Problem requiring user intervension 
                         minor    (3),   -- Problem not requiring user intervension
                         info     (2),   -- informational only
                         undetermined (1)
                        }
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It contains the serverity of the trap."
	::= { ahNotificationVarBind 3}

ahObjectName OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..64) )
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It describes the object for which the trap is generated."
	::= { ahNotificationVarBind 4}

ahProbableCause OBJECT-TYPE
	SYNTAX          AhProbableCause 
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It describes the probable cause of a problem."
	::= { ahNotificationVarBind 5}

ahCurValue OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the current value of a threshold counter."
        ::= { ahNotificationVarBind 6}

ahThresholdHigh OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the value for a high threshold."
        ::= { ahNotificationVarBind 7}

ahThresholdLow  OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the value for a low threshold."
        ::= { ahNotificationVarBind 8}

ahPreviousState OBJECT-TYPE
        SYNTAX          AhState
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the value for a previous state."
        ::= { ahNotificationVarBind 9}

ahCurrentState OBJECT-TYPE
        SYNTAX          AhState
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the value for the current state."
        ::= { ahNotificationVarBind 10}

ahTrapDesc OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the description of the trap."
        ::= { ahNotificationVarBind 11}

ahCode  OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains access information to the Aerohive 
			logging/action dictionary."
        ::= { ahNotificationVarBind 12}

ahIfIndex  OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The interface index used to identify uniquely
			an interface (logical or physical)."
        ::= { ahNotificationVarBind 13}


ahObjectType  OBJECT-TYPE
        SYNTAX          INTEGER {
                         clientLink   (1),   -- Client link
                         neighborLink (2)    -- Neighbor link 
                        }
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It specifies the object type: a client link or a neighbor link."
        ::= { ahNotificationVarBind 14}

ahRemoteId  OBJECT-TYPE
	SYNTAX          AhNodeID
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It is the MAC address of the remote node. If the remote 
			node is a HiveAP, the ID must be the MAC address
			of its management interface. If the remote node is a
			client station, it must be the MAC address of the client."
	::= {ahNotificationVarBind 15}
	
ahIDPType OBJECT-TYPE
	SYNTAX          INTEGER {
                         rogue         (1),
                         valid         (2),
                         external      (3)   
                        }	
    MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It is used to indicate the AP identified is a
		rogue, or valid, or compliant, or noncompliant, or external AP."
	::= {ahNotificationVarBind 16}

ahIDPChannel OBJECT-TYPE
	SYNTAX          Integer32
    MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It is the channel number used by the identified AP."
	::= {ahNotificationVarBind 17}
	
ahIDPRSSI OBJECT-TYPE
	SYNTAX          Integer32
    MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It is the RSSI for the identified AP or Client."
	::= {ahNotificationVarBind 18}
	                       
ahIDPCompliance OBJECT-TYPE
	SYNTAX          INTEGER {
                         open_policy       (1),
                         wep_policy        (2),
                         wpa_policy        (4),
                         wmm_policy        (8),
                         oui_policy        (16),
                         ssid_policy       (32),
                         short_preamble_policy (64),
                         short_beacon_policy (128),
                         ad_hoc_policy     (256)                           
                        }	
    MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It is bit mask to indicate which policy the indentified
		AP is compliant with (bit is set if it is NOT compliant)."
	::= {ahNotificationVarBind 19}

ahSSID OBJECT-TYPE
        SYNTAX          DisplayString (SIZE (0..32) )
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the SSID name for the detected AP."
        ::= { ahNotificationVarBind 20}
       
ahStationType  OBJECT-TYPE
        SYNTAX          INTEGER {
                         station_ap       (1),
                         station_client   (2)
                         }
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It indicates whether it is event for a peer AP 
        				or client PC"
        ::= { ahNotificationVarBind 21}

ahIDPStationData OBJECT-TYPE
	SYNTAX          INTEGER {
                         open_policy       (1),
                         wep_policy        (2),
                         wpa_policy        (4),
                         wmm_policy        (8),
                         short_preamble_policy (64),
                         short_beacon_policy (128),
                         ad_hoc_policy     (256)                           
                        }	
    MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "It is bit mask to indicate policies are detected for 
				the identified AP . Note: the oui_policy and ssid_policy are
				omitted due to the presence of the ahRemoteID, and SSID in the
				trap message. "
	::= {ahNotificationVarBind 22}
	
ahRemoved  OBJECT-TYPE
        SYNTAX          INTEGER {
                         removed_false    (0),
                         removed_true     (1)
                         }
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It indicates whether the AP or client can not 
        				be detected."
        ::= { ahNotificationVarBind 23}
        

      
ahClientMAC OBJECT-TYPE
        SYNTAX          AhNodeID
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the MAC address of the wireless client. It is 
        				required."
        ::= { ahNotificationVarBind 24}

ahCLientIP OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the IP address of the wireless client. It is
        				optional."
        ::= { ahNotificationVarBind 25}

ahClientHostName OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the host name of the wireless client. It is
        				optional."
        ::= { ahNotificationVarBind 26}
                   
ahClientUserName OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It contains the user name of the wireless client. It is
        				optional."
        ::= { ahNotificationVarBind 27}

ahPowerSrc OBJECT-TYPE
        SYNTAX          INTEGER {
						 adaptor    (0),
                         poe        (1)
                         }
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It indicates whether the power source is from the power adaptor or PoE. 
				If the power source is the adaptor, PoE information in the trap is ignored."
        ::= { ahNotificationVarBind 28}

ahPoEEth0On	OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It indicates whether PoE is on eth0 or not."
        ::= { ahNotificationVarBind 29}
        		  			  
ahPoEEth0Pwr OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It indicates the power level of PoE in watts
        				multiply by 10."
        ::= { ahNotificationVarBind 30}
        		
ahPoEEth1On	OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It indicates whether PoE is on eth1 or not."
        ::= { ahNotificationVarBind 31}
        		  			  
ahPoEEth1Pwr OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "It indicates the power level of PoE on eht1 in watts
        				multiply by 10."
        ::= { ahNotificationVarBind 32}

ahRadioChannel  OBJECT-TYPE	
	    SYNTAX	    Integer32
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the channel number currently in use for this radio."
		::=  {  ahNotificationVarBind 33 }
	
ahRadioTxPower  OBJECT-TYPE	
	    SYNTAX	    Integer32
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the transmit power in dBm that the radio is currently using. The range 
					is 0 to 20 dBm."
		::=  {  ahNotificationVarBind 34 }
	
ahClientAuthMethod OBJECT-TYPE	
        SYNTAX	    AhAuthenticationMethod
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the authentication method the client uses when 
		communicating with the HiveAP."
		::=  {  ahNotificationVarBind  35  }

ahClientEncryptionMethod OBJECT-TYPE	
	    SYNTAX	    AhEncrytionMethod
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the encryption method the client uses when communicating
				with the HiveAP."
		::=  {  ahNotificationVarBind  36  }

ahClientMACProtocol OBJECT-TYPE	
	    SYNTAX	    AhMACProtocol
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the radio mode the client uses when communicating
				with the HiveAP."
		::=  {  ahNotificationVarBind  37  }

ahClientVLAN OBJECT-TYPE	
        SYNTAX	    Integer32
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the VLAN that the client uses when communicating
				with the HiveAP."
		::=  {  ahNotificationVarBind  38 }


ahClientUserProfId OBJECT-TYPE	
        SYNTAX	    Integer32
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the user profile ID that the client uses when communicating
				with the HiveAP."
		::=  {  ahNotificationVarBind  39 }

ahClientChannel OBJECT-TYPE	
        SYNTAX	    Integer32
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the radio channel that the client uses when communicating
				with the HiveAP."
		::=  {  ahNotificationVarBind  40 }
		
ahClientCWPUsed OBJECT-TYPE	
	    SYNTAX	    TruthValue
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the Boolean datatype indicating whether a captive web portal
				is used."
		::=  {  ahNotificationVarBind  41 }

ahBSSID OBJECT-TYPE	
	    SYNTAX	    AhNodeID
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the basic service set identifier of the client
		 if the ahRemoteId is a client."
		::=  {  ahNotificationVarBind  42 }

ahPoEEth0MaxSpeed OBJECT-TYPE	
	    SYNTAX	    INTEGER {
	    				 linkdown (1),  -- Interface down
                         eth10   (2),   -- 10 Mbps
                         eth100  (3),   -- 100 Mbps
                         eth1000 (4)	-- 1000 Mbps 
                        }
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the automatically adjusted maximum Ethernet speed 
		based on the power source and level."
		::=  {  ahNotificationVarBind  43 }

ahPoEEth1MaxSpeed OBJECT-TYPE	
	    SYNTAX	    INTEGER {
	    				 linkdown (1),  -- Interface shutdown
                         eth10   (2),   -- 10 Mbps
                         eth100  (3),   -- 100 Mbps
                         eth1000 (4)	-- 1000 Mbps
                        }
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the automatically adjusted maximum Ethernet speed 
		based on the power source and level."
		::=  {  ahNotificationVarBind  44 }

ahPoEWifi0Setting OBJECT-TYPE	
	    SYNTAX	    INTEGER {
	    				 invalid  (0),   -- Interface is invalid
	    				 linkdown (1),   -- Interface shutdown
                         config   (2),   -- User configured Wi-Fi tx-rx chain 
                         tx2rx3   (3)   -- Maximum transmit chain 2 and max. receive chain 3
                            }
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the 
		power source and power level."
		::=  {  ahNotificationVarBind  45 }

ahPoEWifi1Setting OBJECT-TYPE	
	    SYNTAX	    INTEGER {
	    				 invalid  (0),   -- Interface is invalid
	    				 linkdown (1),   -- Interface shutdown
                         config   (2),   -- User configured Wi-Fi tx-rx chain 
                         tx2rx3   (3)   -- Maximum transmit chain 2 and maximum receive chain 3
                            }
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
		power source and power level."
		::=  {  ahNotificationVarBind  46 }

ahPoEWifi2Setting OBJECT-TYPE	
	    SYNTAX	    INTEGER {
	    				 invalid  (0),   -- Interface is invalid
	    				 linkdown (1),   -- Interface shutdown
                         config   (2),   -- User configured Wi-Fi tx-rx chain 
                         tx2rx3   (3)   -- Maximum transmit chain 2 and maximum receive chain 3
                            }
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
		power source and power level."
		::=  {  ahNotificationVarBind  47 }
		
ahAssociationTime OBJECT-TYPE	
	    SYNTAX	    Counter32
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "The association time(s) of client connect or disconnect to AP."
		::=  {  ahNotificationVarBind  48 }
ahIDPInNet OBJECT-TYPE	
	    SYNTAX	TruthValue
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "It is the Boolean datatype indicating whether AP is in local network."
            ::=  {  ahNotificationVarBind  49 }
		
ahDiscoverAge OBJECT-TYPE	
	    SYNTAX	Counter32
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "It is the age from the rogue client is discovered."
            ::=  {  ahNotificationVarBind  50 }
            
ahUpdateAge OBJECT-TYPE	
	    SYNTAX	Counter32
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "It is the age from the rogue client is updated."
            ::=  {  ahNotificationVarBind  51 }
            
ahRunningAverageInterference OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "channel utilizations running average interference."
            ::=  {  ahNotificationVarBind  52 }

ahShortTermInterference OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "channel utilizations short term interference.
	                 The short term period is defined by CLI config,
	                  usually, it should be in the range of 5 minutes to 30 minutes. "
            ::=  {  ahNotificationVarBind  53 }

ahSnapshotInterference OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "channel utilizations snapshot interference. it is the last minute��s means average."
            ::=  {  ahNotificationVarBind  54 }
            
ahFailureSet OBJECT-TYPE	
	    SYNTAX	TruthValue
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "It is the Boolean datatype indicating whether this failure(alert) is on or off."
            ::=  {  ahNotificationVarBind  55 }

ahInterferenceThreshold OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "the configured channel utilizations interference threshold.
	                 it is defined by CLI config."
            ::=  {  ahNotificationVarBind  56 }

ahCRCErrRateThreshold OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "the configured CRC error rate threshold. it is defined by CLI config."
            ::=  {  ahNotificationVarBind  57 }

ahCRCErrRate OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "short term CRC error rate. The interval of the refresh of CRC error rate calculation 
	                 is the same interval as channel utilization short term means average interval."
            ::=  {  ahNotificationVarBind  58 }


ahBandwidthSentinelStatus OBJECT-TYPE	
	    SYNTAX	    INTEGER {
	    		alert  (0),   -- good client but does not meet sla
	    		clear  (1),   -- good client and meet sla
                        bad   (2)   -- bad client 
            }
            MAX-ACCESS  read-only
            STATUS	    current
	    DESCRIPTION "Bandwidth sentinel status.
		         In alert message, the value should be zero. In clear message, the value should be 1."
            ::=  {  ahNotificationVarBind  59 }

ahGuaranteedBandwidth OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "the configured guaranteed bandwidth(Kbps). it is defined by CLI config."
            ::=  {  ahNotificationVarBind  60 }

ahActualBandwidth OBJECT-TYPE
	    SYNTAX	INTEGER
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "the actual bandwidth(Kbps)."
            ::=  {  ahNotificationVarBind  61 }

ahBandwidthSentinelAction OBJECT-TYPE
	    SYNTAX	Counter32
	    MAX-ACCESS  read-only
            STATUS	current
	    DESCRIPTION "bit maps to indicate which action has been taken on this client.
	                 bit 0: indicate whether log the guaranteed bandwidth violation or not,
	                 bit 1: indicate whether add more token to meet the minimum guaranteed bandwidth or not."
            ::=  {  ahNotificationVarBind  62 }

ahBeaconInterval  OBJECT-TYPE
            SYNTAX      Counter32
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION "It is the number of time units between Beacon transmissions, One time unit is
                         1024 microseconds."
            ::=  {  ahNotificationVarBind 63 }

ahLevel OBJECT-TYPE
            SYNTAX      INTEGER {
                         interface (1),  -- a interface level alert
                         client    (2)   -- a client level alert
                        }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION     "The level value will tell HM whether this is an interface level alert or a client alert."
            ::= {ahNotificationVarBind 64}

ahAlarmAlertType OBJECT-TYPE
            SYNTAX      INTEGER {
                         crcrate     (0),  -- The CRC error rate only applies to interface level alert
                         txdroprate  (1),  -- The TX drop rate is calculated based on the max retried TX frames over total unicast TX frames
                         txretryrate (2),  -- The TX retry rate is calculated based on the total retries over total unicast TX frames
                         rxdroprate  (3),  -- The RX drop rate is calculated based on the dropped RX frames over total RX frames
                         airtime     (4)   -- The The airtime percentage is the sum of both TX and RX airtime percentages
                        }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION     "There are five types, CRC Rate only applies to interface level alert, 
                             TX drop/retry rate is is calculated based on retries over total unicast TX frames,
                             RX drop rate is calculated based on the dropped RX frames over total RX frames,
                             Airtime percentage is the sum of both TX and RX airtime percentages."
            ::= {ahNotificationVarBind 65}

ahThresholdValue OBJECT-TYPE
            SYNTAX	INTEGER
            MAX-ACCESS  read-only
            STATUS	current
            DESCRIPTION "the configured CRC error rate, TX drop/retry rate, RX drop rate threshold. it is defined by CLI config."
            ::= {ahNotificationVarBind 66}

ahShortTermValue OBJECT-TYPE
            SYNTAX	INTEGER
            MAX-ACCESS  read-only
            STATUS	current
            DESCRIPTION "the percentage of this sampling period, CRC error rate, TX drop/retry rate, RX drop rate."
            ::= {ahNotificationVarBind 67}

ahSnapshotValue OBJECT-TYPE
            SYNTAX	INTEGER
            MAX-ACCESS  read-only
            STATUS	current
            DESCRIPTION "the snapshot value of CRC error rate, TX drop/retry rate, RX drop rate."
            ::= {ahNotificationVarBind 68}

ahIfName OBJECT-TYPE	
            SYNTAX	    AhString
	        MAX-ACCESS  read-only
	        STATUS	    current
	        DESCRIPTION "Name - uniquely identifies an AP Interface."
            ::= {ahNotificationVarBind 69}

END