path: root/MIBS/alteonos/ALTEON-TIGON-SWITCH-MIB

-- COPYRIGHT NOTICE
-- Copyright (c) Alteon WebSystems, Inc. 2001
-- All rights reserved
-- 
-- HISTORY
-- $Log: tigonSwitch.mib,v $
-- Revision 1.1.1.1  2004/11/01 16:55:42  maxbaker
-- initial import
--
-- Revision ts10_rrekha/2 2002/04/05 02:42:44 rrekha
-- 	Fixed 217841: Changed descprition for agImageVer1 and agImageVer2 to
-- 	include new version digit.
-- 
-- Revision ge_rrekha/4 2001/10/31 00:06:12 rrekha
-- 	Fixed 13656: Remove syslog group for PM and AOL DPS.
-- 
-- Revision ge_rrekha/2 2001/10/26 01:12:31 rrekha
-- 	Update the description with information on the placement of the
-- 	sensors.
-- 
-- Revision genie_rekha/23 2001/07/07 02:26:22 rekha
-- 	For SNMP added ability to enable/disable syslog for SYN attack
-- 	detection and TCP rate limiting.
-- 
-- Revision genie_rekha/21 2001/06/20 19:52:34 rekha
-- 	Moved SYN attack detection under serverloadbalance to be consistent
-- 	with CLI.
-- 
-- Revision genie_rekha/19 2001/06/19 21:54:58 rekha
-- 	Added MIB objects to support SYN attack detection.
-- 
-- Revision genie_rekha/17 2001/05/25 00:11:10 rekha
-- 	Removed 'other' from enumerations.
-- 
-- Revision genie_rekha/15 2001/05/18 00:12:23 rekha
-- 	CR11597: Changed the enum for agClrSyslogMsgs to start with a 1
-- 	instead of 0 as enumerations should not have a number with vlaue 0
-- 	per RFC1155.
-- 
-- Revision test_smiao/5 2001/05/07 21:46:36 smiao
-- 	Added syslog/trap features in webUI and SNMP.
-- 
-- Revision genie_rekha/12 2001/04/25 22:24:10 rekha
-- 	Fixed CR11327: Added MIB object for RURL key.
-- 
-- Revision jbLatest_jbuswell/4 2001/04/23 19:21:25 jbuswell
-- 	CR#11147: Added to the description of agSoftwareVersion to include new
-- 	version digit.
-- 
-- Revision astro2_mmac/3 2001/04/11 17:36:53 mmac
-- 	add object adSlotNumber; this object is holds the chassis slot number 
-- 	of the 780 WSM4 blade.
-- 
-- Revision work_rmundhra/8 2001/03/27 00:43:21 rmundhra
-- 	Fixed 11047:Aceview(EMS)need individual software keys to 
-- 	be instrumented.
-- 	Added entries agEnabledGslbKey and agEnabledBwmKey.
-- 
-- Revision test_smiao/3 2001/03/21 23:24:43 smiao
-- 	Removed duplicate registration, private-mibs and switch definitions.
-- 	Added IMPORTS switch FROM ALTEON-ROOT-MIB.
-- 
-- Revision jbLatest_jbuswell/2 2001/03/15 22:10:06 jbuswell
-- 	Defect 10731: Added agClrSyslogMsgs, changed OID of agSavePending due
-- 	to conflict.
-- 
-- Revision work_rmundhra/4 2001/03/06 23:11:49 rmundhra
-- 	Added SNMP support for NTP.
-- 
-- Revision genie_rekha/10 2001/02/28 21:58:54 rekha
-- 	Added SNMP support for management network and mask.
-- 
-- Revision work_rmundhra/2 2001/02/27 22:53:59 rmundhra
-- 	Fixed 10217: (Agent) Aceview does not show console enabled/disabled
-- 	console output syslog messages but in CLI under syslog menu it shows
-- 	this feature.
-- 	Added entries agCurCfgConsole & agNewCfgConsole to mib.
-- 
-- Revision genie_rekha/7 2001/02/16 00:11:24 rekha
-- 	Fixed 10218: Added MIB objects for radius telnet.
-- 
-- Revision genie_rekha/4 2001/02/09 01:18:17 rekha
-- 	Added MIB object agSavePending. This fixes CR# 5096
-- 
-- Revision genie_rekha/2 2001/02/08 18:18:03 rekha
-- 	As part of the code cleanup split the Tigon MIB into smaller
-- 	modules. Instead of altswitch.mib these 5 new modules should be
-- 	used.
-- 
-- $EndLog$
-- 
-- Version 10.0.x
--

ALTEON-TIGON-SWITCH-MIB DEFINITIONS ::= BEGIN

IMPORTS
    enterprises, mgmt, NetworkAddress, IpAddress, Counter, Gauge 
        FROM RFC1155-SMI
    OBJECT-TYPE
	FROM RFC-1212
    PhysAddress, DisplayString
	FROM RFC1213-MIB
    switch
	FROM ALTEON-ROOT-MIB;

-- groups in private-mibs

hardware          OBJECT IDENTIFIER ::= { switch 1 }
agent             OBJECT IDENTIFIER ::= { switch 2 }
stats		  OBJECT IDENTIFIER ::= { switch 8 }
information	  OBJECT IDENTIFIER ::= { switch 9 }
altswitchTraps    OBJECT IDENTIFIER ::= { switch 13 }
operCmds          OBJECT IDENTIFIER ::= { switch 14 }
radius            OBJECT IDENTIFIER ::= { switch 16 }

agGeneral         OBJECT IDENTIFIER ::= { agent 1 }
agGeneralConfig   OBJECT IDENTIFIER ::= { agent 2 }

memStats	  OBJECT IDENTIFIER ::= { stats  12 }
pktStats	  OBJECT IDENTIFIER ::= { stats  13 }
mpCpuStats	  OBJECT IDENTIFIER ::= { stats  16 }

-- There are two configuration blocks for Alteon switches.
-- The "current_config" reflects the configuration parameters that the
-- switch is operating on and it is read-only.  The objects with "CurCfg"
-- in the name are reflect to this configuration block.
--
-- The "new_config" accepts user configurations on set.  The objects with
-- "NewCfg" in the name are reflect to this configuration block.
--
-- The newly set configurations will not take effect until a "apply"
-- command has been issued (See agApplyConfiguration object defined in
-- ALTEON-PRIVATE-MIBS).
--
-- The newly set configurations will not be saved through next restarting
-- of the switch unless a "save" command has been issued (See
-- agSaveConfiguration object defined in ALTEON-PRIVATE-MIBS).

-- Hardware Information

hwPartNumber OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The hardware part number of the Alteon Switch." 
    ::= { hardware 1 }

hwRevision OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The hardware revision.  If the revision is not
	 available, a zero length string should be returned."
    ::= { hardware 2 }

hwPowerSupplyStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        bad(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The status of the internal power supply."
    ::= { hardware 3 }

hwRedundantPSPresent OBJECT-TYPE 
    SYNTAX  INTEGER { 
        notPresent(3),  
        present(4) 
        } 
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION 
        "Existence of redundant power supply." 
    ::= { hardware 4 } 

hwRedundantPSStatus OBJECT-TYPE 
    SYNTAX  INTEGER { 
        ok(1), 
        bad(2),
        notPresent(3)  
        } 
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION 
        "The status of the redundant power supply." 
    ::= { hardware 5 }

hwSensor1Temp OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The temperature of the rear left sensor in degrees Celsius."
    ::= { hardware 6 }

hwSensor2Temp OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory
    DESCRIPTION
        "The temperature of the rear middle sensor in degrees Celsius."
    ::= { hardware 7 } 

hwSensor3Temp OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory
    DESCRIPTION
        "The temperature of the front middle sensor in degrees Celsius."
    ::= { hardware 8 } 

hwSensor4Temp OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory
    DESCRIPTION
        "The temperature of the front right sensor in degrees Celsius."
    ::= { hardware 9 } 

-- Agent General Group
-- This group of objects take effect on the 'SET' request.
-- There is no need to 'apply' or 'save'.
 
agSaveConfiguration OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        saveActive(2),
        notSaveActive(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to write current configuration to 
         nonvolatile storage.

         When issued with the saveActive, the active configuration
         in flash is saved to backup in flash and then the new
         configuration is saved to the active configuration in flash.

         When issued with notSaveActive, the active configuration
         is NOT saved to the flash and the active configuration is
         overwritten with the new configuration.

         ok(1) is returned always when read."
    ::= { agGeneral 1 }

agApplyConfiguration OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        apply(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to apply the changes made to configuration 
         of the switch. By setting the value to apply(2), all the changes 
         made since the last apply are written to the new_config block.

         other(1) is returned when this object ie read. "
    ::= { agGeneral 2 }

agApplyPending OBJECT-TYPE
    SYNTAX  INTEGER {
        applyNeeded(2),
        noApplyNeeded(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object, when read, gives the user information
         whether an apply action is needed and that the configuration
         has been chaged by the user actions. The user then can
         apply the changes by setting proper value to the object
         agApplyConfiguration described above."
    ::= { agGeneral 3 }

agReset OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        coldReset(2),
        warmReset(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to reboot the agent.
         other(1) is returned always when read.

         The following values are writable:
             coldReset(2)...
             warmReset(3)..."
    ::= { agGeneral 4 }

agConfigForNxtReset OBJECT-TYPE
    SYNTAX  INTEGER {
        active(2),
        backup(3),
        default(4)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The configuration information to be loaded from at next reset.

          The following values are writable:
              active(2)...active configuration block
              backup(3)...backup configuration block
              default(4)..default configuration block"
    ::= { agGeneral 5 }

agImageForNxtReset OBJECT-TYPE
    SYNTAX  INTEGER {
        image1(2),
        image2(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The software image to be booted from at next reset.

         The following values are writable:
             image1(2)...image 1
             image2(3)...image 2"
    ::= { agGeneral 6 }

agSoftwareVersion OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The version of the software image that is currently running on the 
         system in the form of 'major.minor.maintenance.bugfix'.  A zero 
         length string is returned if version is not available."
    ::= { agGeneral 7 }

agBootVer OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The version of the boot code in the form of 'major.minor.bugfix'.
         A zero length string is returned if version is not available."
    ::= { agGeneral 8 }

agImage1Ver OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The version of the software image stored in image 1 storage in the 
         form of 'major.minor.maintenance.bugfix'.  A zero length string is 
         returned if version is not available or there is no valid 
         software image."
    ::= { agGeneral 9 }

agImage2Ver OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The version of the software image stored in image 2 storage in the 
         form of 'major.minor.maintenance.bugfix'.  A zero length string is
         returned if version is not available or there is no valid software
         image."
    ::= { agGeneral 10 }

agRtcDate OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The date on the real time clock in the form of 'mm/dd/yy'.  
         A zero length string is returned if date is not available."
    ::= { agGeneral 11 }

agRtcTime OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The time on the real time clock in the form of 'hh:mm:ss'.  
         A zero length string is returned if time is not available."
    ::= { agGeneral 12 }

agTftpServerIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The TFTP server IP address."
    ::= { agGeneral 13 }

agTftpImageFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The image file name to be downloaded."
    ::= { agGeneral 14 }

agTftpImage OBJECT-TYPE
    SYNTAX  INTEGER {
        image1(2),
        image2(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Whether the image file should be loaded in image1 or image2 in flash."
    ::= { agGeneral 15 }

agTftpDownload OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        download(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to cause to download software image 
         according to the setup of agTftpServerIpAddr, agTftpImageFileName, 
         agTftpImage when download(2) is issued.
         other(1) is returned always when read."
    ::= { agGeneral 16 }

agLastSetErrorReason   OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..256))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The error reason of the last SET failure."
    ::= { agGeneral 17 }

agTftpServer OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..64))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The TFTP server IP address or domain name."
    ::= { agGeneral 18 }

agTftpCfgFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The configuration file name."
    ::= { agGeneral 19 }

agTftpDumpFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The file name for core dump."
    ::= { agGeneral 20 }

agTftpAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        img-get(2),
        cfg-get(3),
        cfg-put(4),
        dump-put(5)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to perform various TFTP Get or Put functions.
         The TFTP sever is specified in agTftpServer object.
	 img-get(2) - Download switch image from a specified image
                      file (agTftpImageFileName) on the TFTP server to
	              the destinated storage (agTftpImage).
	 cfg-get(3) - Download switch configuration from a specified
                      file (agTftpCfgFileName) on the TFTP server.
	 cfg-put(4) - Upload switch configuration to a specified
                      file (agTftpCfgFileName) on the TFTP server.
	 dump-put(5)- Download switch core dump to a specified
                      file (agTftpDumpFileName) on the TFTP server.

         other(1) is returned always when read."
    ::= { agGeneral 21 }

agTftpLastActionStatus OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The recorded status of the previous TFTP activity."
    ::= { agGeneral 22 }

agRevert OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        revert(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to revert the unapplied changes 
         made to the switch. By setting the value to revert(2), 
         all the unapplied changes will be reverted. This action 
         will copy the current_config to the new_config block.

         other(1) is returned when this object is read. "
    ::= { agGeneral 23 }

agRevertApply OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        revertApply(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to revert the unsaved changes 
         made to the switch. By setting the value to revertApply(2), 
         all the unsaved as well as unapplied changes will be 
         reverted.

         other(1) is returned when this object is read. "
    ::= { agGeneral 24 }

agEnabledSwFeatures OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The software features that are enabled on the switch."
    ::= { agGeneral 25 }

agClrSyslogMsgs OBJECT-TYPE
    SYNTAX  INTEGER {
            other(1),
            reset(2)
            }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Clears all current Syslog messages."
    ::= { agGeneral 26 }

agSavePending OBJECT-TYPE
    SYNTAX  INTEGER {
        saveNeeded(1),
        noSaveNeeded(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object, when read, gives the user information
         whether an save action is needed and that the configuration
         has been applied but not saved to the flash."
    ::= { agGeneral 27 }

agEnabledGslbKey OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Query if software key Global slb enabled on switch."
    ::= { agGeneral 28 }

agEnabledBwmKey OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Query if software key Bandwidth Mgmt. enabled on switch."
    ::= { agGeneral 29 }

agSlotNumber OBJECT-TYPE
    SYNTAX INTEGER (1..10)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"Identifies the slot in which this switch is installed. If the 
         agent implementing this MIB is not a blade in a chassis this 
         value has no meaning."
    ::= { agGeneral 30 }

agEnabledRurlKey OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The status of the RURL software key."
    ::= { agGeneral 31 }

-- Agent General Configuration Group

agNewCfgSyslogHost OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The syslog host IP address, in the new_configuration block."
    ::= { agGeneralConfig 1 }

agCurCfgSyslogHost OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The syslog host IP address, as currently configured in
         the current_configuration block."
    ::= { agGeneralConfig 2 }

agNewCfgBootp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable the use of BootP, in the new_configuration block."
    ::= { agGeneralConfig 3 }

agCurCfgBootp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable the use of BootP, as currently configured in the 
         current_configuration block."
    ::= { agGeneralConfig 4 }

agNewCfgSpanningTree OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Turn On or Off Spanning Tree Protocol for the switch, in the 
         new_configuration block."
    ::= { agGeneralConfig 5 }

agCurCfgSpanningTree OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The state of Spanning Tree Protocol for the switch, as
         currently configured in the current_configuration block."
    ::= { agGeneralConfig 6 }

-- Trap host table

agTrapHostTableMaxEnt OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the trap host table."
    ::= { agGeneralConfig 7 }

agCurCfgTrapHostTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgCurCfgTrapHostEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of trap hosts which to send SNMP traps in the 
         current_configuration block."
    ::= { agGeneralConfig 8 }

agCurCfgTrapHostEntry OBJECT-TYPE
    SYNTAX  AgCurCfgTrapHostEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the trap host table in the current_configuration block."
    INDEX   { agCurCfgTrapHostIndx }
    ::= { agCurCfgTrapHostTable 1 }

AgCurCfgTrapHostEntry ::= SEQUENCE {
    agCurCfgTrapHostIndx            INTEGER,
    agCurCfgTrapHostIpAddr          IpAddress,
    agCurCfgTrapHostCommString      DisplayString
    }

agCurCfgTrapHostIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the row in trap host table."
    ::= { agCurCfgTrapHostEntry 1 }

agCurCfgTrapHostIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IP address of a trap host."
    ::= { agCurCfgTrapHostEntry 2 }

agCurCfgTrapHostCommString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..32))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The SNMP community string to use with the trap host"
    ::= { agCurCfgTrapHostEntry 3 }

agNewCfgTrapHostTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgNewCfgTrapHostEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of trap hosts which to send SNMP traps in the
          new_configuration block."
    ::= { agGeneralConfig 9 }

agNewCfgTrapHostEntry OBJECT-TYPE
    SYNTAX  AgNewCfgTrapHostEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the trap host table in the new_configuration block."
    INDEX   { agNewCfgTrapHostIndx }
    ::= { agNewCfgTrapHostTable 1 }

AgNewCfgTrapHostEntry ::= SEQUENCE {
    agNewCfgTrapHostIndx            INTEGER,
    agNewCfgTrapHostIpAddr          IpAddress,
    agNewCfgTrapHostCommString      DisplayString
    }

agNewCfgTrapHostIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the row in trap host table."
    ::= { agNewCfgTrapHostEntry 1 }

agNewCfgTrapHostIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IP address of a trap host."
    ::= { agNewCfgTrapHostEntry 2 }

agNewCfgTrapHostCommString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..32))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The SNMP community string to use with the trap host"
    ::= { agNewCfgTrapHostEntry 3 }

agCurCfgHttpServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The TCP port number that the HTTP server is listening to 
         in the current_configuration block."
    ::= { agGeneralConfig 10 }

agNewCfgHttpServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The TCP port number that the HTTP server is listening to 
         in the new_configuration block."
    ::= { agGeneralConfig 11 }

agCurCfgLoginBanner OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..79))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The user defined login banner."
    ::= { agGeneralConfig 12 }

agNewCfgLoginBanner OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..79))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The user defined login banner."
    ::= { agGeneralConfig 13 }

agNewCfgSyslog2Host OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The second syslog host IP address, in the new_configuration block."
    ::= { agGeneralConfig 14 }

agCurCfgSyslog2Host OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The second syslog host IP address, as currently configured in
         the current_configuration block."
    ::= { agGeneralConfig 15 }

agCurCfgSyslogFac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1),
	local1(2),
	local2(3),
	local3(4),
	local4(5),
	local5(6),
	local6(7),
	local7(8)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The facility of syslog host in the current_configuration block."
    ::= { agGeneralConfig 16 }

agNewCfgSyslogFac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1), 
	local1(2),
	local2(3),
	local3(4),
	local4(5),
	local5(6),
        local6(7),
	local7(8)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The facility of syslog host in the new_configuration block."
    ::= { agGeneralConfig 17 }

agCurCfgSyslog2Fac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1),
	local1(2),
	local2(3),
	local3(4),
	local4(5),
	local5(6),
	local6(7),
	local7(8)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The facility of syslog2 host in the current_configuration block."
    ::= { agGeneralConfig 18 }

agNewCfgSyslog2Fac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1), 
	local1(2),
	local2(3),
	local3(4),
        local4(5),
	local5(6),
        local6(7),
	local7(8)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The facility of syslogs host in the new_configuration block."
    ::= { agGeneralConfig 19 }

agCurCfgSmtpHost OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The user defined SMTP host."
    ::= { agGeneralConfig 20}

agNewCfgSmtpHost OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The user defined SMTP host."
    ::= { agGeneralConfig 21 }

agCurCfgConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable console output of syslog messages."
    ::= { agGeneralConfig 22 }

agNewCfgConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable console output of syslog messages."
    ::= { agGeneralConfig 23 }

agCurCfgMgmtNetwork OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The management network - corresponding to the mnet command of 
         the slb configuration menu." 
    ::= { agGeneralConfig 24 }

agNewCfgMgmtNetwork OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The management network - corresponding to the mnet command of 
         the system menu." 
    ::= { agGeneralConfig 25 }

agCurCfgMgmtMask OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The management subnet mask - corresponding to the mmask command 
         of the system configuration menu." 
    ::= { agGeneralConfig 26 }

agNewCfgMgmtMask OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The management subnet mask - corresponding to the mmask command 
         of the system configuration menu." 
    ::= { agGeneralConfig 27 }

agNTP	OBJECT IDENTIFIER ::= { agGeneralConfig 28 }

agCurCfgNTPServer OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The NTP Server Address."
    ::= { agNTP 1 }

agNewCfgNTPServer OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The NTP Server Address."
    ::= { agNTP 2 }

agCurCfgNTPResyncInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..2880)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The NTP Server resync interval in minutes."
    ::= { agNTP 3 }

agNewCfgNTPResyncInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..2880)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The NTP Server resync interval in minutes."
    ::= { agNTP 4 }


agCurCfgNTPTzone OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..3))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The NTP Server timezone offset from GMT in hours."
    ::= { agNTP 5 }

agNewCfgNTPTzone OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..3))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The NTP Server timezone offset from GMT in hours."
    ::= { agNTP 6 }

agCurCfgNTPDlight OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable/disable daylight savings time."
    ::= { agNTP 7 }

agNewCfgNTPDlight OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable/disable daylight savings time."
    ::= { agNTP 8 }

agCurCfgNTPService OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable/disable NTP Service."
    ::= { agNTP 9 }

agNewCfgNTPService OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable/disable NTP Service."
    ::= { agNTP 10 }

agLog OBJECT IDENTIFIER ::= { agGeneralConfig 29 }

agNewCfgSyslogTrapConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable console syslog and SNMP trap, in the 
         new_configuration block."
    ::= { agLog 1 }

agCurCfgSyslogTrapConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable console syslog and SNMP trap, as currently 
         configured in the current_configuration block."
    ::= { agLog 2 }

agNewCfgSyslogTrapSystem OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable system level syslog and SNMP trap, in the 
         new_configuration block."
    ::= { agLog 3 }

agCurCfgSyslogTrapSystem OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable system level syslog and SNMP trap, as currently 
         configured in the current_configuration block."
    ::= { agLog 4 }

agNewCfgSyslogTrapMgmt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable management(flash, config, login) syslog and SNMP 
         trap, in the new_configuration block."
    ::= { agLog 5 }

agCurCfgSyslogTrapMgmt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable management(flash, config, login) syslog and SNMP 
         trap, as currently configured in the current_configuration block."
    ::= { agLog 6 }

agNewCfgSyslogTrapCli OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable CLI generated error syslog and SNMP trap, in the 
	 new_configuration block."
    ::= { agLog 7 }

agCurCfgSyslogTrapCli OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable CLI generated error syslog and SNMP trap, as 
         currently configured in the current_configuration block." 
    ::= { agLog 8 }

agNewCfgSyslogTrapStp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable spanning tree syslog and SNMP trap, in the 
         new_configuration block."
    ::= { agLog 9 }

agCurCfgSyslogTrapStp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable spanning tree syslog and SNMP trap, as currently 
         configured in the current_configuration block."
    ::= { agLog 10 }

agNewCfgSyslogTrapVlan OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable VLAN syslog and SNMP trap, in the new_configuration
         block."
    ::= { agLog 11 }

agCurCfgSyslogTrapVlan OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable VLAN syslog and SNMP trap, as currently configured 
         in the current_configuration block."
    ::= { agLog 12 }

agNewCfgSyslogTrapSlb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable SLB syslog and SNMP trap, in the new_configuration 
         block."
    ::= { agLog 13 }

agCurCfgSyslogTrapSlb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable SLB syslog and SNMP trap, as currently configured 
         in the current_configuration block."
    ::= { agLog 14 }

agNewCfgSyslogTrapGslb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable GSLB syslog and SNMP trap, in the new_configuration
         block."
    ::= { agLog 15 }

agCurCfgSyslogTrapGslb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable GSLB syslog and SNMP trap, as currently configured 
         in the current_configuration block."
    ::= { agLog 16 }

agNewCfgSyslogTrapFilter OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable filter syslog and SNMP trap, in the 
         new_configuration block."
    ::= { agLog 17 }

agCurCfgSyslogTrapFilter OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable filter syslog and SNMP trap, as currently 
         configured in the current_configuration block."
    ::= { agLog 18 }

agNewCfgSyslogTrapSsh OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable SSH, RADIUS syslog and SNMP trap, in the 
         new_configuration block."
    ::= { agLog 19 }

agCurCfgSyslogTrapSsh OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable SSH, RADIUS syslog and SNMP trap, as currently 
         configured in the current_configuration block."
    ::= { agLog 20 }

agNewCfgSyslogTrapVrrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable VRRP syslog and SNMP trap, in the new_configuration
         block."
    ::= { agLog 21 }

agCurCfgSyslogTrapVrrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable VRRP syslog and SNMP trap, as currently configured 
         in the current_configuration block."
    ::= { agLog 22 }

agNewCfgSyslogTrapBgp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable BGP syslog and SNMP trap, in the new_configuration 
         block."
    ::= { agLog 23 }

agCurCfgSyslogTrapBgp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable BGP syslog and SNMP trap, as currently configured 
         in the current_configuration block."
    ::= { agLog 24 }

agNewCfgSyslogTrapNtp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable NTP syslog and SNMP trap, in the new_configuration 
         block."
    ::= { agLog 25 }

agCurCfgSyslogTrapNtp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable NTP syslog and SNMP trap, as currently configured 
         in the current_configuration block."
    ::= { agLog 26 }

agNewCfgSyslogTrapIsd OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable ISD syslog and SNMP trap, in the new_configuration 
         block."
    ::= { agLog 27 }

agCurCfgSyslogTrapIsd OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable ISD syslog and SNMP trap, as currently configured 
         in the current_configuration block."
    ::= { agLog 28 }

agNewCfgSyslogTrapIp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable IP related syslog and SNMP trap, in the 
         new_configuration block."
    ::= { agLog 31 }

agCurCfgSyslogTrapIp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable IP related syslog and SNMP trap, as currently 
         configured in the current_configuration block."
    ::= { agLog 32 }

agNewCfgSyslogTrapWeb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable WEBUI related syslog and SNMP trap, in the 
         new_configuration block."
    ::= { agLog 35 }

agCurCfgSyslogTrapWeb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable WEBUI related syslog and SNMP trap, as currently 
         configured in the current_configuration block."
    ::= { agLog 36 }

agNewCfgSyslogTrapSynAtk OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable SYN attack detection related syslog and SNMP trap,
         in the new_configuration block."
    ::= { agLog 37 }

agCurCfgSyslogTrapSynAtk OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable SYN attack detection related syslog and SNMP trap,
         as currently configured in the current_configuration block."
    ::= { agLog 38 }

agNewCfgSyslogTrapTcpLim OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable TCP rate limiting related syslog and SNMP trap, 
         in the new_configuration block."
    ::= { agLog 39 }

agCurCfgSyslogTrapTcpLim OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable TCP rate limiting related syslog and SNMP trap,
         as currently configured in the current_configuration block."
    ::= { agLog 40 }

-- RADIUS Configuration 
 
radCurCfgPrimaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the Primary RADIUS server."
    ::= { radius 1 }

radNewCfgPrimaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the Primary RADIUS server."
    ::= { radius 2 }

radCurCfgSecondaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the Secondary RADIUS server."
    ::= { radius 3 }

radNewCfgSecondaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the Secondary RADIUS server."
    ::= { radius 4 }

radCurCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1500..3000)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Specify the RADIUS port number."
    ::= { radius 5 }

radNewCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1500..3000)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Speicfy the RADIUS port number."
    ::= { radius 6 }

radCurCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (1..10)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to RADIUS server."
    ::= { radius 7 }

radNewCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (1..10)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to RADIUS server."
    ::= { radius 8 }

radCurCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of retries to the RADIUS server."
    ::= { radius 9 }

radNewCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Number of retries to the RADIUS server."
    ::= { radius 10 }

radCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disbale RADIUS authentication."
    ::= { radius 11 }

radNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable RADIUS authentication."
    ::= { radius 12 }

radCurCfgAuthenString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The RADIUS authentication string."
    ::= { radius 13 }

radNewCfgAuthenString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The RADIUS authentication string."
    ::= { radius 14 }

radCurCfgTelnet OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disbale RADIUS backdoor for telnet."
    ::= { radius 15 }

radNewCfgTelnet OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable RADIUS backdoor for telnet."
    ::= { radius 16 }

-- Statistics Group

-- Memory Statistics Group
-- This group represents Memory Statistics information

memStatsAllocs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of memory allocations."
    ::= { memStats 1 }

memStatsFrees OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of memory frees."
    ::= { memStats 2 }
 
memStatsAllocFails OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of memory allocations failed."
    ::= { memStats 3 }
 
memStatsBytesCurr OBJECT-TYPE
    SYNTAX Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The outstanding memory in bytes have been allocated."
    ::= { memStats 4 }
 
memStatsBytesHiwat OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Bytes allocated witch high water mark."
    ::= { memStats 5 }
 
memStatsPoolBytes OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total bytes in the memory pool."
    ::= { memStats 6 }
 
memStatsLargest OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The largest block has been allocated."
    ::= { memStats 7 }
 
-- Packet Statistics Group
-- This group represents Packet Statistics information
 
pktStatsAllocs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total packets have been allocated."
    ::= { pktStats 1 }
 
pktStatsFrees OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total packets have been freed."
    ::= { pktStats 2 }
 
pktStatsAllocFails OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total packet allocations failed."
    ::= { pktStats 3}
 
pktStatsMediums OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of medium size packets have been allocated."
    ::= { pktStats 4}
 
pktStatsJumbos OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of jumbo size packets have been allocated."
    ::= { pktStats 5}
 
pktStatsSmalls OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of small size packets have been allocated."
    ::= { pktStats 6}

-- MP CPU Statisitics Group
 
mpCpuAStatsUtil1Second OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of MP CPU A over 1 second. It shows the percentage."
    ::= { mpCpuStats 1}
 
mpCpuBStatsUtil1Second OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of MP CPU B over 4 seconds. 
	 It shows the percentage."
    ::= { mpCpuStats 2}

mpCpuAStatsUtil4Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of MP CPU A over 4 seconds. 
	 It shows the percentage."
    ::= { mpCpuStats 3}
 
mpCpuBStatsUtil4Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of MP CPU B over 4 seconds. 
	 It shows the percentage."
    ::= { mpCpuStats 4}

mpCpuAStatsUtil64Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of MP CPU A over 64 seconds. 
	 It shows the percentage."
    ::= { mpCpuStats 5}
 
mpCpuBStatsUtil64Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of MP CPU B over 64 second.
	 It shows the percentage."
    ::= { mpCpuStats 6}

END