path: root/MIBS/arubaos/WLSX-IFEXT-MIB

--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:

WLSX-IFEXT-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 
       
       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
	   Counter32,
	   IpAddress,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC

       OBJECT-GROUP
           FROM SNMPv2-CONF
	ifIndex
		  FROM RFC1213-MIB

		 ArubaPoeState,
		 ArubaDot1dState,
		 ArubaPortMode,
		 ArubaVlanValidRange,
	     ArubaEnableValue,
	     ArubaOperStateValue,
		 ArubaPortType,
		 ArubaPortDuplex,
		 ArubaPortSpeed,
		 ArubaIfType
	   		FROM ARUBA-TC

	wlsxEnterpriseMibModules
           FROM ARUBA-MIB;

	wlsxIfExtMIB MODULE-IDENTITY 
       LAST-UPDATED "202008141745Z"
       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
       CONTACT-INFO
            "Postal:    3333 Scott Blvd,
                        Santa Clara, CA 95054
            E-mail:     aruba-ext-eng-reg@hpe.com
            Phone:      408 227 4500
            Fax:        408 752 0626"
       DESCRIPTION
           "This MIB module defines MIB objects which provide
            System level information about the Aruba controller."

       REVISION         "202008141745Z"
       DESCRIPTION
            "Deprecated wlsxIfExtPortTable and added new table
             wlsxIfExtNPortTable"

       REVISION        "1001261806Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 3 }

   wlsxIfExtGroup       OBJECT IDENTIFIER ::= { wlsxIfExtMIB 1 }

-- Port Table defines all the physical ports in the controller.

   wlsxIfExtPortTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxIfExtPortEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       deprecated
      DESCRIPTION 
	  	"
			The table of processors contained by the controller. This table is
            deprecated in favor of wlsxIfExtNPortTable.
		"
      ::= { wlsxIfExtGroup 1 } 

   wlsxIfExtPortEntry OBJECT-TYPE 
	  SYNTAX       WlsxIfExtPortEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       deprecated
      DESCRIPTION 
	  "
	  	An entry for one processor contained by the controller.
	  "
	  INDEX {ifExtSlotNumber, ifExtPortNumber}
      ::= { wlsxIfExtPortTable 1 } 

   WlsxIfExtPortEntry ::=
     SEQUENCE {
		 ifExtSlotNumber			Integer32,
		 ifExtPortNumber			Integer32,
		 ifExtPortIfIndex			Integer32,
		 ifExtAdminState			ArubaEnableValue,
		 ifExtOperState				INTEGER,
		 ifExtPoeState				ArubaPoeState,
		 ifExtIsTrusted				TruthValue,
		 ifExtDot1DState			ArubaDot1dState,
		 ifExtMode					ArubaPortMode,
		 ifExtAccessVlanId			ArubaVlanValidRange,
		 ifExtTrunkNativeVlanId		ArubaVlanValidRange,
		 ifExtTrunkIsAllowedAll		TruthValue,
		 ifExtTrunkAllowedVlanList	OCTET STRING,
		 ifExtIngressACLName		DisplayString,
		 ifExtEgressACLName			DisplayString,
		 ifExtSessionACLName		DisplayString,
		 ifExtXsecVlan				ArubaVlanValidRange,
		 ifExtIsMonitoring			TruthValue,
		 ifExtIsMux					TruthValue,
		 ifExtUserSlotNumber		Integer32,
		 ifExtUserPortNumber		Integer32,
		 ifExtPortSpeed				ArubaPortSpeed,
		 ifExtPortDuplex			ArubaPortDuplex,
		 ifExtPortType				ArubaPortType,
		 ifExtDescr					DisplayString,
		 ifExtUserModuleNumber		Integer32
	 }

   ifExtSlotNumber OBJECT-TYPE
         SYNTAX       Integer32
	  	 MAX-ACCESS   not-accessible		
         STATUS       deprecated
         DESCRIPTION
            "
			This object represents the Physical Slot of the Interface.
            "
        ::= { wlsxIfExtPortEntry 1 }

   ifExtPortNumber OBJECT-TYPE
        SYNTAX      Integer32
	  	MAX-ACCESS   not-accessible		
        STATUS       deprecated
        DESCRIPTION
            "
			This object represents the Physical Port of the Interface. 
            "
        ::= { wlsxIfExtPortEntry 2 }

   ifExtPortIfIndex OBJECT-TYPE
        SYNTAX      Integer32
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			This is the ifIndex in ifTable, representing this slot and port. 
            This object is deprecated in favour of ifExtNPortIfIndex.
            "
        ::= { wlsxIfExtPortEntry 3 }

   ifExtAdminState OBJECT-TYPE
        SYNTAX       ArubaEnableValue
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			The desired state of the interface. This object is deprecated in
            favour of ifExtNAdminState.
			"
        ::= { wlsxIfExtPortEntry 4 }
 
   ifExtOperState OBJECT-TYPE
        SYNTAX       INTEGER{
						up(1),
						down(2),
						testing(3)
					 }
        MAX-ACCESS   read-only
        STATUS       deprecated
        DESCRIPTION
			"
			The current operational state of the interface. This object is
            deprecated in favour of ifExtNOperState.
			"
        ::= { wlsxIfExtPortEntry 5 }
        
   ifExtPoeState OBJECT-TYPE
        SYNTAX       ArubaPoeState
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			The current state of the power over ethernet capability of the
			port. This object is deprecated in favour of ifExtNPoeState.
			"
        ::= { wlsxIfExtPortEntry 6 }
   ifExtIsTrusted OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			The object indicates if the port is used in the trusted side of the
			network or the untrusted side. This object is deprecated in favour
            of ifExtNIsTrusted.
			"
        ::= { wlsxIfExtPortEntry 7 }

   ifExtDot1DState OBJECT-TYPE
        SYNTAX       ArubaDot1dState
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			Current Dot1d state of the Port. 
            This object provides default switch port value if ifExtIsMonitoring
            is true(1).
            This object is deprecated in favour of ifExtNDot1DState.
			"
        ::= { wlsxIfExtPortEntry 8 }

   ifExtMode OBJECT-TYPE
        SYNTAX       ArubaPortMode
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			This object indicates if the port is in a Trunk mode or access mode.
            This object provides default switch port value if ifExtIsMonitoring
            is true(1).
            This object is deprecated in favour of ifExtNMode.
			"
        ::= { wlsxIfExtPortEntry 9 }

   ifExtAccessVlanId OBJECT-TYPE
        SYNTAX       ArubaVlanValidRange
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			The VLAN Id when the port is in Access Mode. This object provides
            default switch port value if ifExtIsMonitoring is true(1). This object is
            deprecated in favour of ifExtNAccessVlanId.
			"
        ::= { wlsxIfExtPortEntry 10 }

   ifExtTrunkNativeVlanId OBJECT-TYPE
        SYNTAX       ArubaVlanValidRange
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			The native VLAN Id of the Port, when the port is in dot1q mode. This
            object provides default switch port value if ifExtIsMonitoring is
            true(1). 
            This object is deprecated in favour of ifExtNTrunkNativeVlanId.
			"
        ::= { wlsxIfExtPortEntry 11 }

   ifExtTrunkIsAllowedAll OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			When the mode of the port is Trunk, this Object indicates 
			if the port is part of all the configured Vlans. This object
            provides default switch port value if ifExtIsMonitoring is true(1).
            This object is deprecated in favour of ifExtNTrunkIsAllowedAll.
			"
        ::= { wlsxIfExtPortEntry 12 }

   ifExtTrunkAllowedVlanList OBJECT-TYPE
        SYNTAX       OCTET STRING(SIZE(0..512))
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			    A string of octets containing one bit per VLAN for a
			    total of 4096 VLANs in the management domain.  
				The most significant bit of the octet string is the 
				lowest value VLAN of 4096 VLANs.
				By setting the bit(1) we indicate that the vlan is part of the
				interface. 
				The most significant bit of the bitmap is transmitted 
				first. Note that if the length of this string is less than
				512 octets, any 'missing' octets are assumed to contain
				the value zero. 
                This object provides default switch port value if
                ifExtIsMonitoring is true(1).
                This object is deprecated in favour of
                ifExtNTrunkAllowedVlanList.
			"
        ::= { wlsxIfExtPortEntry 13 }

   ifExtIngressACLName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			This object represents the Ingress ACL name applied to the port.
			An Empty string indicates that there is not ACL applied on this 
			port. This object is deprecated in favour of ifExtNIngressACLName.
			"
        ::= { wlsxIfExtPortEntry 14 }

   ifExtEgressACLName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			This object represents the Egress ACL name applied to the port.
			An Empty string indicates that there is not ACL applied on this 
			port. This object is deprecated in favour of ifExtNEgressACLName.
			"
        ::= { wlsxIfExtPortEntry 15 }

   ifExtSessionACLName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			This object represents the Session ACL name applied to the port.
			An Empty string indicates that there is not ACL applied on this 
			port. This object is deprecated in favour of ifExtNEgressACLName.
			"
        ::= { wlsxIfExtPortEntry 16 }

   ifExtXsecVlan OBJECT-TYPE
        SYNTAX       ArubaVlanValidRange
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			This object indicates if the port is an Xsec Port. This object is
            deprecated in favour of ifExtNXsecVlan.
			"
        ::= { wlsxIfExtPortEntry 17 }

   ifExtIsMonitoring OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			This object indicates if the port is used for Port monitoring.
            When the value of this object is true(1), then below objects provide
            default switch port values configured on this port.
            ifExtMode,
            ifExtAccessVlanId,
            ifExtTrunkNativeVlanId,
            ifExtTrunkIsAllowedAll,
            ifExtTrunkAllowedVlanList
            This object is deprecated in favour of ifExtNIsMonitoring.
			"
        ::= { wlsxIfExtPortEntry 18 }

   ifExtIsMux OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       deprecated
        DESCRIPTION
			"
			This object indicates if the port is used as a MUX Port. This object
            is deprecated in favour of ifExtNIsMux.
			"
        ::= { wlsxIfExtPortEntry 19 }

   ifExtUserSlotNumber OBJECT-TYPE
        SYNTAX      Integer32
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			The user-visible (zero-based) slot number.
            "
        ::= { wlsxIfExtPortEntry 20 }

   ifExtUserPortNumber OBJECT-TYPE
        SYNTAX      Integer32
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			The user-visible (zero-based) port number.
            "
        ::= { wlsxIfExtPortEntry 21 }

   ifExtPortSpeed OBJECT-TYPE
        SYNTAX      ArubaPortSpeed
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			Speed of the Port. This object is deprecated in favour of
            ifExtNPortSpeed.
            "
        ::= { wlsxIfExtPortEntry 22 }

   ifExtPortDuplex OBJECT-TYPE
        SYNTAX      ArubaPortDuplex
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			Duplexity of the Port. This object is deprecated in favour of
            ifExtNPortDuplex.
			"
        ::= { wlsxIfExtPortEntry 23 }

   ifExtPortType OBJECT-TYPE
        SYNTAX      ArubaPortType
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			Type of the Port. This object is deprecated in favour of
            ifExtNPortType.
            "
        ::= { wlsxIfExtPortEntry 24 }

   ifExtDescr OBJECT-TYPE
        SYNTAX      DisplayString
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			Port Description. This object is deprecated in favour of
            ifExtNDescr.
            "
        ::= { wlsxIfExtPortEntry 25 }

   ifExtUserModuleNumber OBJECT-TYPE
        SYNTAX      Integer32
	  	MAX-ACCESS   read-only		
        STATUS       deprecated
        DESCRIPTION
            "
			The user-visible (zero-based) module number.
            "
        ::= { wlsxIfExtPortEntry 26 }


-- VLAN Table defines all the VLAN in the controller.

   wlsxIfExtVlanTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxIfExtVlanEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		"
      ::= { wlsxIfExtGroup 2 } 

   wlsxIfExtVlanEntry OBJECT-TYPE 
	  SYNTAX       WlsxIfExtVlanEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  "
	  	An entry for one processor contained by the controller.
	  "
	  INDEX {ifExtVlanId}
      ::= { wlsxIfExtVlanTable 1 } 

   WlsxIfExtVlanEntry ::=
     SEQUENCE {
		 ifExtVlanId			ArubaVlanValidRange,
		 ifExtVlanName			DisplayString,
		 ifExtVlanStatus		RowStatus
	 }

   ifExtVlanId OBJECT-TYPE
         SYNTAX       ArubaVlanValidRange
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			This object represents the VLAN Id of the Interface.
            "
        ::= { wlsxIfExtVlanEntry 1 }

   ifExtVlanName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
	  	MAX-ACCESS   read-create		
        STATUS       current
        DESCRIPTION
            "
			Name of the VLAN. 
            "
        ::= { wlsxIfExtVlanEntry 2 }

   ifExtVlanStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
		 	A Row status Object used to create/modify the row.
		 "
        ::= { wlsxIfExtVlanEntry 3 }

-- VLAN Port Member Table defines port membership in the vlan.

   wlsxIfExtVlanMemberTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxIfExtVlanMemberEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		"
      ::= { wlsxIfExtGroup 3 } 

   wlsxIfExtVlanMemberEntry OBJECT-TYPE 
	  SYNTAX       WlsxIfExtVlanMemberEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  "
	  	An entry for one processor contained by the controller.
	  "
	  INDEX {ifExtVlanId, ifIndex}
      ::= { wlsxIfExtVlanMemberTable 1 } 

   WlsxIfExtVlanMemberEntry ::=
     SEQUENCE {
		 ifExtVlanMemberStatus		RowStatus,
		 ifExtVlanMemberSlot		Integer32,
		 ifExtVlanMemberPort        Integer32,
		 ifExtVlanMemberType        ArubaIfType
	 }

   ifExtVlanMemberStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
		 	A Row status Object used to create/modify and indicate the 
			status row.
		 "
        ::= { wlsxIfExtVlanMemberEntry 1 }

   ifExtVlanMemberSlot OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
         "
		 	The slot index of the slot referred to by this row (1-based).
		 "
        ::= { wlsxIfExtVlanMemberEntry 2 }

   ifExtVlanMemberPort OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
         "
		 	The slot index of the slot referred to by this row (1-based).
		 "
        ::= { wlsxIfExtVlanMemberEntry 3 }

   ifExtVlanMemberType OBJECT-TYPE
        SYNTAX      ArubaIfType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
         "
		 	The VLAN member type.
		 "
        ::= { wlsxIfExtVlanMemberEntry 4 }

-- VLAN Interface Table defines Layer3 VLAN Interfaces.

   wlsxIfExtVlanInterfaceTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxIfExtVlanInterfaceEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		"
      ::= { wlsxIfExtGroup 4 } 

   wlsxIfExtVlanInterfaceEntry OBJECT-TYPE 
	  SYNTAX       WlsxIfExtVlanInterfaceEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  "
	  	An entry for one processor contained by the controller.
	  "
	  INDEX {ifExtVlanId}
      ::= { wlsxIfExtVlanInterfaceTable 1 } 

   WlsxIfExtVlanInterfaceEntry ::=
     SEQUENCE {
		 ifExtVlanInterfaceIfIndex			Integer32,
		 ifExtVlanInterfaceDescription		DisplayString,
		 ifExtVlanInterfaceBWContract		DisplayString,
		 ifExtVlanInterfaceAdminState		ArubaEnableValue,
		 ifExtVlanInterfaceOperState		ArubaOperStateValue,
		 ifExtVlanInterfaceIpAddress		IpAddress,
		 ifExtVlanInterfaceIpMask			IpAddress,
		 ifExtVlanInterfaceIsLocalArp		ArubaEnableValue,
		 ifExtVlanInterfaceStatus			RowStatus,
		 ifExtVlanInterfaceIpRouting		ArubaEnableValue,
		 ifExtVlanInterfaceIpNatInside		ArubaEnableValue,
		 ifExtVlanInterfaceIpIgmpSnooping	ArubaEnableValue

	 }

   ifExtVlanInterfaceIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This is the ifIndex in ifTable, representing VLAN Interface. 
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 1 }

   ifExtVlanInterfaceDescription OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates the description of the Interface.
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 2 }

   ifExtVlanInterfaceBWContract OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates the Bandwidth contract on the interface.
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 3 }

   ifExtVlanInterfaceAdminState OBJECT-TYPE
        SYNTAX       ArubaEnableValue
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates the administrative state of the Interface.
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 4 }

   ifExtVlanInterfaceOperState OBJECT-TYPE
        SYNTAX      ArubaOperStateValue
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates the operational state of the Interface.
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 5 }

   ifExtVlanInterfaceIpAddress OBJECT-TYPE
        SYNTAX       IpAddress
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates the IP Address of the Interface.
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 6 }


   ifExtVlanInterfaceIpMask OBJECT-TYPE
        SYNTAX       IpAddress
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates the subnet mask of the Interface.
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 7 }

   ifExtVlanInterfaceIsLocalArp OBJECT-TYPE
        SYNTAX       ArubaEnableValue
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates if the Local Arp is set on the Interface. 
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 8 }

   ifExtVlanInterfaceStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
		 	A Row status Object used to create/modify and indicate the 
			status row.
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 9}

   ifExtVlanInterfaceIpRouting OBJECT-TYPE
        SYNTAX       ArubaEnableValue
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates if the IP routing is set on the Interface. 
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 10 }

   ifExtVlanInterfaceIpNatInside OBJECT-TYPE
        SYNTAX       ArubaEnableValue
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates if the IP nat inside is set on the Interface. 
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 11 }

   ifExtVlanInterfaceIpIgmpSnooping OBJECT-TYPE
        SYNTAX       ArubaEnableValue
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
         "
			This Object indicates if the IP IGMP snooping is set on the Interface. 
		 "
        ::= { wlsxIfExtVlanInterfaceEntry 12 }

   wlsxIfExtNPortTable  OBJECT-TYPE
      SYNTAX       SEQUENCE OF WlsxIfExtNPortEntry
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
        "
            The table of interface details.
        "
      ::= { wlsxIfExtGroup 5 }

   wlsxIfExtNPortEntry OBJECT-TYPE
      SYNTAX       WlsxIfExtNPortEntry
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
      "
        An entry in wlsxIfExtNPortTable.
      "
      INDEX { ifExtNSlotNumber, ifExtNModuleNumber, ifExtNPortNumber }
      ::= { wlsxIfExtNPortTable 1 }

   WlsxIfExtNPortEntry ::=
     SEQUENCE {
         ifExtNSlotNumber             Integer32,
         ifExtNModuleNumber          Integer32,
         ifExtNPortNumber             Integer32,
         ifExtNPortIfIndex           Integer32,
         ifExtNAdminState            ArubaEnableValue,
         ifExtNOperState             INTEGER,
         ifExtNPoeState              ArubaPoeState,
         ifExtNIsTrusted             TruthValue,
         ifExtNDot1DState            ArubaDot1dState,
         ifExtNMode                  ArubaPortMode,
         ifExtNAccessVlanId          ArubaVlanValidRange,
         ifExtNTrunkNativeVlanId     ArubaVlanValidRange,
         ifExtNTrunkIsAllowedAll     TruthValue,
         ifExtNTrunkAllowedVlanList  OCTET STRING,
         ifExtNIngressACLName        DisplayString,
         ifExtNEgressACLName         DisplayString,
         ifExtNSessionACLName        DisplayString,
         ifExtNXsecVlan              ArubaVlanValidRange,
         ifExtNIsMonitoring          TruthValue,
         ifExtNIsMux                 TruthValue,
         ifExtNPortSpeed             ArubaPortSpeed,
         ifExtNPortDuplex            ArubaPortDuplex,
         ifExtNPortType              ArubaPortType,
         ifExtNDescr                 DisplayString
     }

   ifExtNSlotNumber  OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
            "
            This object represents the user-visible (zero-based) Physical Slot of the Interface.
            "
        ::= { wlsxIfExtNPortEntry 1 }

   ifExtNModuleNumber   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS       current
        DESCRIPTION
            "
            This object represents the user-visible (zero-based) Physical Module of the Interface.
            "
        ::= { wlsxIfExtNPortEntry 2 }

   ifExtNPortNumber OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS       current
        DESCRIPTION
            "
            This object represents the user-visible (zero-based) Physical Port of the Interface.
            "
        ::= { wlsxIfExtNPortEntry 3 }

   ifExtNPortIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
            This is the ifIndex in ifTable, representing this slot, module and port.
            "
        ::= { wlsxIfExtNPortEntry 4 }

   ifExtNAdminState OBJECT-TYPE
        SYNTAX       ArubaEnableValue
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            The desired state of the interface.
            "
        ::= { wlsxIfExtNPortEntry 5 }

   ifExtNOperState OBJECT-TYPE
        SYNTAX       INTEGER{
                        up(1),
                        down(2),
                        testing(3)
                     }
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
            The current operational state of the interface.
            "
        ::= { wlsxIfExtNPortEntry 6 }

   ifExtNPoeState OBJECT-TYPE
        SYNTAX       ArubaPoeState
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            The current state of the power over ethernet capability of the
            port.
            "
        ::= { wlsxIfExtNPortEntry 7 }

   ifExtNIsTrusted OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            The object indicates if the port is used in the trusted side of the
            network or the untrusted side.
            "
        ::= { wlsxIfExtNPortEntry 8 }

   ifExtNDot1DState OBJECT-TYPE
        SYNTAX       ArubaDot1dState
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            Current Dot1d state of the Port.
            "
        ::= { wlsxIfExtNPortEntry 9 }

   ifExtNMode OBJECT-TYPE
        SYNTAX       ArubaPortMode
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            This object indicates if the port is in a Trunk mode or access mode.
            This object provides default switch port value if ifExtIsMonitoring
            is true(1).
            "
        ::= { wlsxIfExtNPortEntry 10 }

   ifExtNAccessVlanId OBJECT-TYPE
        SYNTAX       ArubaVlanValidRange
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            The VLAN Id when the port is in Access Mode. This object provides 
            default switch port value if ifExtIsMonitoring is true(1).
            "
        ::= { wlsxIfExtNPortEntry 11 }

   ifExtNTrunkNativeVlanId OBJECT-TYPE
        SYNTAX       ArubaVlanValidRange
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            The native VLAN Id of the Port, when the port is in dot1q mode.
            This object provides default switch port value if ifExtIsMonitoring
            is true(1).
            "
        ::= { wlsxIfExtNPortEntry 12 }

   ifExtNTrunkIsAllowedAll OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            When the mode of the port is Trunk, this Object indicates
            if the port is part of all the configured Vlans.
            This object provides default switch port value if ifExtIsMonitoring
            is true(1).
            "
        ::= { wlsxIfExtNPortEntry 13 }

   ifExtNTrunkAllowedVlanList OBJECT-TYPE
        SYNTAX       OCTET STRING(SIZE(0..512))
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
                A string of octets containing one bit per VLAN for a
                total of 4096 VLANs in the management domain.
                The most significant bit of the octet string is the
                lowest value VLAN of 4096 VLANs.
                By setting the bit(1) we indicate that the vlan is part of the
                interface.
                The most significant bit of the bitmap is transmitted
                first. Note that if the length of this string is less than
                512 octets, any 'missing' octets are assumed to contain
                the value zero.
                This object provides default switch port value if
                ifExtIsMonitoring is true(1).
            "
        ::= { wlsxIfExtNPortEntry 14 }

   ifExtNIngressACLName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            This object represents the Ingress ACL name applied to the port.
            An Empty string indicates that there is not ACL applied on this
            port.
            "
        ::= { wlsxIfExtNPortEntry 15 }

   ifExtNEgressACLName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            This object represents the Egress ACL name applied to the port.
            An Empty string indicates that there is not ACL applied on this
            port.
            "
        ::= { wlsxIfExtNPortEntry 16 }

   ifExtNSessionACLName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            This object represents the Session ACL name applied to the port.
            An Empty string indicates that there is not ACL applied on this
            port.
            "
        ::= { wlsxIfExtNPortEntry 17 }

   ifExtNXsecVlan OBJECT-TYPE
        SYNTAX       ArubaVlanValidRange
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            This object indicates if the port is an Xsec Port.
            "
        ::= { wlsxIfExtNPortEntry 18 }

   ifExtNIsMonitoring OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            This object indicates if the port is used for Port monitoring.
            When the value of this object is true(1), then below objects provide
            default switch port values configured on this port.
            ifExtNMode,
            ifExtNAccessVlanId,
            ifExtNTrunkNativeVlanId,
            ifExtNTrunkIsAllowedAll,
            ifExtNTrunkAllowedVlanList
            "
        ::= { wlsxIfExtNPortEntry 19 }

   ifExtNIsMux OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "
            This object indicates if the port is used as a MUX Port.
            "
        ::= { wlsxIfExtNPortEntry 20 }

   ifExtNPortSpeed OBJECT-TYPE
        SYNTAX      ArubaPortSpeed
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
            Speed of the Port.
            "
        ::= { wlsxIfExtNPortEntry 21 }

   ifExtNPortDuplex OBJECT-TYPE
        SYNTAX      ArubaPortDuplex
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
            Duplexity of the Port.
            "
        ::= { wlsxIfExtNPortEntry 22 }

   ifExtNPortType OBJECT-TYPE
        SYNTAX      ArubaPortType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
            Type of the Port.
            "
        ::= { wlsxIfExtNPortEntry 23 }

   ifExtNDescr OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
            Port Description.
            "
        ::= { wlsxIfExtNPortEntry 24 }

END