path: root/MIBS/arubaos/WLSX-MON-MIB

--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4: 
WLSX-MON-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 

       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
	   Counter32,
	   IpAddress,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC

	   ArubaEnableValue,
	   ArubaFrameType,
	   ArubaRogueApType,
	   ArubaStationType,
	   ArubaPhyType,
	   ArubaAPMatchType,
	   ArubaAPMatchMethod,
	   ArubaHTMode,
	   ArubaHTRate,
	   ArubaMonEncryptionType,
       ArubaMonEncryptionCipher,
       ArubaMonAuthAlgorithm
	   		FROM ARUBA-TC

       OBJECT-GROUP
           FROM SNMPv2-CONF
		wlsxEnterpriseMibModules
			FROM ARUBA-MIB;

   wlsxMonMIB MODULE-IDENTITY 
       LAST-UPDATED "202008141745Z"
       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
       CONTACT-INFO
            "Postal:    3333 Scott Blvd,
                        Santa Clara, CA 95054
            E-mail:     aruba-ext-eng-reg@hpe.com
            Phone:      408 227 4500
            Fax:        408 752 0626"
       DESCRIPTION
           "
		   This MIB module defines MIB objects which provide
           information about the Monitored Access Points.
		   "
       REVISION         "202008141745Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 6 }

   wlsxMonStatsGroup     	OBJECT IDENTIFIER ::= { wlsxMonMIB 6 }
   wlsxMonInfoGroup     	OBJECT IDENTIFIER ::= { wlsxMonMIB 7 }

   wlsxMonAccessPointStatsGroup  OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 1 }
   wlsxMonStationStatsGroup  OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 2 }

-- Stats group contains tables for station statistics, channel statistics and
-- AP statistics.

   wlsxMonAPStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonAPStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists the statistics of all the APs being monitored
			by the controller. 
		"
      ::= { wlsxMonAccessPointStatsGroup 1 } 

   wlsxMonAPStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonAPStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Monitored Access Point Stats entry"
	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
      ::= { wlsxMonAPStatsTable 1 } 

   WlsxMonAPStatsEntry ::=
     SEQUENCE {
		 monPhyAddress				MacAddress,
		 monRadioNumber				Integer32,
		 monitoredApBSSID				MacAddress,
		 monPhyType					ArubaPhyType,
		 monAPCurrentChannel		    Unsigned32,
		 monAPNumClients		    	Integer32,
		 monAPTxPkts					Counter32,
		 monAPTxBytes					Counter32,
		 monAPRxPkts					Counter32,
		 monAPRxBytes					Counter32,
		 monAPTxDeauthentications		Counter32,
		 monAPRxDeauthentications		Counter32,
		 monAPChannelThroughput			Integer32,
		 monAPFrameRetryRate			Integer32,
		 monAPFrameLowSpeedRate			Integer32,
		 monAPFrameNonUnicastRate		Integer32,
		 monAPFrameFragmentationRate	Integer32,
		 monAPFrameBandwidthRate		Integer32,
		 monAPFrameRetryErrorRate		Integer32,
		 monAPChannelErrorRate			Integer32,
		 monAPESSID                     DisplayString,
		 monAPRSSI                      Integer32,
		 monAPFrameReceiveErrorRate		Integer32
   }

	monPhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			MAC address of the air monitor that is monitoring the AP.
            "
        ::= { wlsxMonAPStatsEntry 1}

	monRadioNumber OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Radio number of the air monitor that is monitoring the AP.
            "
        ::= { wlsxMonAPStatsEntry 2 }

	monitoredApBSSID OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			BSSID of the access point being monitored.
            "
        ::= { wlsxMonAPStatsEntry 3}

	monPhyType OBJECT-TYPE
         SYNTAX       ArubaPhyType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			PHY type of the access point being monitored.
            "
        ::= { wlsxMonAPStatsEntry 4 }


	monAPCurrentChannel OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Channel the monitored AP is using.
            "
        ::= { wlsxMonAPStatsEntry 5 }

	monAPNumClients OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Number of clients associated to this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 6 }

	monAPTxPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of packets transmitted by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 7 }

	monAPTxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of bytes transmitted by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 8 }

	monAPRxPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of packets received by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 9 }

	monAPRxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of bytes received by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 10 }

	monAPTxDeauthentications OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of deauthentications transmitted by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 11 }

	monAPRxDeauthentications OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of deauthentications received by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 12 }

	monAPChannelThroughput OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The throughput achieved on this channel by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 13 }

	monAPFrameRetryRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of retry 
			 packets as a percentage of the total packets
			 transmitted and received by this monitored AP
            "
        ::= { wlsxMonAPStatsEntry 14 }

	monAPFrameLowSpeedRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
			 for B band) packets as a percentage of the total packets
			 transmitted and received by this monitored AP
            "
        ::= { wlsxMonAPStatsEntry 15 }

	monAPFrameNonUnicastRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The multicast rate on this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 16 }

	monAPFrameFragmentationRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of fragments
			 as a percentage of the total packets
			 transmitted by this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 17 }

	monAPFrameBandwidthRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The bandwidth of this monitored AP in Kbps.
            "
        ::= { wlsxMonAPStatsEntry 18 }

	monAPFrameRetryErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS  	  deprecated
         DESCRIPTION
            "
			 The number of error packets
			 as a percentage of the total packets
			 received on this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 19 }
	
	monAPChannelErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of error packets 
			 as a percentage of the total packets received
			on the current channel.
            "
        ::= { wlsxMonAPStatsEntry 20 }

	monAPESSID OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			ESSID of the access point being monitored.
            "
        ::= { wlsxMonAPStatsEntry 21 }

	monAPRSSI OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			SNR of the access point being monitored.
            "
        ::= { wlsxMonAPStatsEntry 22 }

	monAPFrameReceiveErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of error packets
			 as a percentage of the total packets
			 received on this monitored AP.
            "
        ::= { wlsxMonAPStatsEntry 23 }
	
-- This table breaks down the AP statistics observed into different
-- rate categories.

   wlsxMonAPRateStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonAPRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the monitored AP Packet and Byte Counts
		but represented in terms of rate categories.
		"
	
      ::= { wlsxMonAccessPointStatsGroup 2 } 

     wlsxMonAPRateStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonAPRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Data rate based packet and byte count entry for a monitored AP"
	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
      ::= { wlsxMonAPRateStatsTable 1 } 
	
     WlsxMonAPRateStatsEntry ::=
     SEQUENCE {
		 monAPStatsTotPktsAt1Mbps			Counter32,
		 monAPStatsTotBytesAt1Mbps			Counter32,
		 monAPStatsTotPktsAt2Mbps			Counter32,
		 monAPStatsTotBytesAt2Mbps			Counter32,
		 monAPStatsTotPktsAt5Mbps			Counter32,
		 monAPStatsTotBytesAt5Mbps			Counter32,
		 monAPStatsTotPktsAt11Mbps			Counter32,
		 monAPStatsTotBytesAt11Mbps		Counter32,
		 monAPStatsTotPktsAt6Mbps			Counter32,
		 monAPStatsTotBytesAt6Mbps			Counter32,
		 monAPStatsTotPktsAt12Mbps			Counter32,
		 monAPStatsTotBytesAt12Mbps		Counter32,
		 monAPStatsTotPktsAt18Mbps			Counter32,
		 monAPStatsTotBytesAt18Mbps		Counter32,
		 monAPStatsTotPktsAt24Mbps			Counter32,
		 monAPStatsTotBytesAt24Mbps		Counter32,
		 monAPStatsTotPktsAt36Mbps			Counter32,
		 monAPStatsTotBytesAt36Mbps		Counter32,
		 monAPStatsTotPktsAt48Mbps			Counter32,
		 monAPStatsTotBytesAt48Mbps		Counter32,
		 monAPStatsTotPktsAt54Mbps			Counter32,
		 monAPStatsTotBytesAt54Mbps		Counter32, 
		 monAPStatsTotPktsAt9Mbps			Counter32,
		 monAPStatsTotBytesAt9Mbps		Counter32
     }

     monAPStatsTotPktsAt1Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 1Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 1 }

     monAPStatsTotBytesAt1Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 1Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 2 }

     monAPStatsTotPktsAt2Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 2Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 3 }

     monAPStatsTotBytesAt2Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 2Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 4 }

     monAPStatsTotPktsAt5Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 5Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 5 }

     monAPStatsTotBytesAt5Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 5Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 6 }

     monAPStatsTotPktsAt11Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 11Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 7 }

     monAPStatsTotBytesAt11Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 11Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 8 }

     monAPStatsTotPktsAt6Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 6Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 9 }

     monAPStatsTotBytesAt6Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 6Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 10 }

     monAPStatsTotPktsAt12Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 12Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 11 }

     monAPStatsTotBytesAt12Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 12Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 12 }

     monAPStatsTotPktsAt18Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 18Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 13 }

     monAPStatsTotBytesAt18Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 18Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 14 }

     monAPStatsTotPktsAt24Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 24Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 15 }

     monAPStatsTotBytesAt24Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 24Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 16 }

     monAPStatsTotPktsAt36Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 36Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 17 }

     monAPStatsTotBytesAt36Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 36Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 18 }

     monAPStatsTotPktsAt48Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 48Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 19 }

     monAPStatsTotBytesAt48Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 48Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 20 }

     monAPStatsTotPktsAt54Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 54Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 21 }

     monAPStatsTotBytesAt54Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 54Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 22 }

     monAPStatsTotPktsAt9Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets observed
			 from this BSSID at 9Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 23 }

     monAPStatsTotBytesAt9Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Bytes observed
			 from this BSSID at 9Mbps rate.
            "
        ::= { wlsxMonAPRateStatsEntry 24 }


-- This table breaks down the channel statistics observed based on the
-- Destination Address Types. 

   wlsxMonAPDATypeStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonAPDATypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the per BSSID Packet and Byte Counts
		but broken down in terms of Destination Address Type. 
		"
      ::= { wlsxMonAccessPointStatsGroup 3 } 

     wlsxMonAPDATypeStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonAPDATypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
			 Destination Address based packet and byte count entry for a
			 monitored AP
			 "
	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
      ::= { wlsxMonAPDATypeStatsTable 1 } 
	
     WlsxMonAPDATypeStatsEntry ::=
     SEQUENCE {
		 monAPStatsTotDABroadcastPkts		Counter32  ,
		 monAPStatsTotDABroadcastBytes		Counter32  ,
		 monAPStatsTotDAMulticastPkts		Counter32  ,
		 monAPStatsTotDAMulticastBytes		Counter32  ,
		 monAPStatsTotDAUnicastPkts			Counter32  ,
		 monAPStatsTotDAUnicastBytes		Counter32  

     }

     monAPStatsTotDABroadcastPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Broadcast packets 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPDATypeStatsEntry 1 }

     monAPStatsTotDABroadcastBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Broadcast Bytes 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPDATypeStatsEntry 2 }

     monAPStatsTotDAMulticastPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Multicast packets 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPDATypeStatsEntry 3 }

     monAPStatsTotDAMulticastBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Multicast Bytes 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPDATypeStatsEntry 4 }

     monAPStatsTotDAUnicastPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Unicast packets 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPDATypeStatsEntry 5 }

     monAPStatsTotDAUnicastBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Unicast Bytes 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPDATypeStatsEntry 6 }

-- This table breaks down the channel statistics observed based on the
-- the Type of the Packet. 

   wlsxMonAPFrameTypeStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonAPFrameTypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the per BSSID Packet and Byte Counts
		but broken down into different Frame Types. 
		"
      ::= { wlsxMonAccessPointStatsGroup 4 } 

     wlsxMonAPFrameTypeStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonAPFrameTypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Frame Type based packet and byte count entry for a monitored AP"
	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
      ::= { wlsxMonAPFrameTypeStatsTable 1 } 
	
     WlsxMonAPFrameTypeStatsEntry ::=
     SEQUENCE {
		 monAPStatsTotMgmtPkts		Counter32  ,
		 monAPStatsTotMgmtBytes	Counter32  ,
		 monAPStatsTotCtrlPkts		Counter32  ,
		 monAPStatsTotCtrlBytes	Counter32  ,
		 monAPStatsTotDataPkts		Counter32  ,
		 monAPStatsTotDataBytes	Counter32  

     }

     monAPStatsTotMgmtPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Management packets 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPFrameTypeStatsEntry 1 }

     monAPStatsTotMgmtBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Management Bytes 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPFrameTypeStatsEntry 2 }

     monAPStatsTotCtrlPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Control packets 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPFrameTypeStatsEntry 3 }

     monAPStatsTotCtrlBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Control Bytes 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPFrameTypeStatsEntry 4 }

     monAPStatsTotDataPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Data packets 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPFrameTypeStatsEntry 5 }

     monAPStatsTotDataBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of Data Bytes 
			 observed from this BSSID.
            "
        ::= { wlsxMonAPFrameTypeStatsEntry 6 }

-- This table breaks down the channel statistics observed into packet size 
-- buckets.

   wlsxMonAPPktSizeStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonAPPktSizeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the per BSSID Packet and Byte Counts
		but broken down into different Packet Sizes. 
		"
      ::= { wlsxMonAccessPointStatsGroup 5 } 

     wlsxMonAPPktSizeStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonAPPktSizeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Packet Size based packet count entry for a BSSID"
	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
      ::= { wlsxMonAPPktSizeStatsTable 1 } 
	
     WlsxMonAPPktSizeStatsEntry ::=
     SEQUENCE {
		 monAPStatsPkts63Bytes		Counter32  ,
		 monAPStatsPkts64To127		Counter32  ,
		 monAPStatsPkts128To255		Counter32  ,
		 monAPStatsPkts256To511		Counter32  ,
		 monAPStatsPkts512To1023	Counter32  ,
		 monAPStatsPkts1024To1518	Counter32  

     }

     monAPStatsPkts63Bytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets transmitted
			 by the AP that were less than 64 bytes long.
            "
        ::= { wlsxMonAPPktSizeStatsEntry 1 }

     monAPStatsPkts64To127 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets transmitted
			 by the AP that were between 64 and 127 bytes long.
            "
        ::= { wlsxMonAPPktSizeStatsEntry 2 }

     monAPStatsPkts128To255 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets 
			 transmitted by the AP that were between 128 and 255 bytes long.
            "
        ::= { wlsxMonAPPktSizeStatsEntry 3 }

     monAPStatsPkts256To511 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets transmitted
			 by the AP that were between 256 and 511 bytes long.
            "
        ::= { wlsxMonAPPktSizeStatsEntry 4 }

     monAPStatsPkts512To1023 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets transmitted
			 by the AP that were between 512 and 1023 bytes long.
            "
        ::= { wlsxMonAPPktSizeStatsEntry 5 }

     monAPStatsPkts1024To1518 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total number of packets transmitted
			 by the AP that were between 1024 and 1518 bytes long.
            "
        ::= { wlsxMonAPPktSizeStatsEntry 6 }

-- This table breaks down the AP statistics observed into different
-- HT rate categories.

   wlsxMonAPHTRateStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonAPHTRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the monitored AP Packet and Byte Counts
		but represented in terms of HT rate categories.
		"
	
      ::= { wlsxMonAccessPointStatsGroup 6 } 

     wlsxMonAPHTRateStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonAPHTRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Data rate based packet and byte count entry for a monitored AP"
	  INDEX { monPhyAddress, monRadioNumber, monitoredApBSSID, monHTRate }
      ::= { wlsxMonAPHTRateStatsTable 1 } 
	
     WlsxMonAPHTRateStatsEntry ::=
     SEQUENCE {
	 	 monHTRate					    ArubaHTRate,
		 monAPStatsTotHTPkts			Counter32,
		 monAPStatsTotHTBytes			Counter32
	 }

	monHTRate OBJECT-TYPE
         SYNTAX       ArubaHTRate
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The rate at which the counters apply
            "
        ::= { wlsxMonAPHTRateStatsEntry 1 }

	monAPStatsTotHTPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of packets processed at the indicated rate 
            "
        ::= { wlsxMonAPHTRateStatsEntry 2 }

	monAPStatsTotHTBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of bytes processed at the indicated rate 
            "
        ::= { wlsxMonAPHTRateStatsEntry 3 }

-- wlsxMonStationStatsGroup contains all the statistics observed by different 
-- Air Monitors attached to this controller. 
-- Station Statatistics are observed by the Air Monitor for that 
-- specific Station.

-- Station Statistics are grouped into Generic,
-- Rate, Destination Address and Frame Type Stats.

-- Station Statistics Group contains all the statistics related to 
-- a Station.

-- wlsxMonStationStatsTable will contain all the Agregate statistics collected
-- for a Station

   wlsxMonStationStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MonStationStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists the statistics of all the wireless stations being monitored
			by an AP connected to this controller. 
		"
      ::= { wlsxMonStationStatsGroup 1} 

   wlsxMonStationStatsEntry OBJECT-TYPE 
	  SYNTAX       MonStationStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Monitored Station Stats Entry"
	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
      ::= { wlsxMonStationStatsTable 1 } 

   MonStationStatsEntry ::=
     SEQUENCE {
		 monitoredStaPhyAddress				MacAddress,
		 monStaChannelNum				Unsigned32,
		 monStaTxPkts					Counter32,
		 monStaTxBytes					Counter32,
		 monStaRxPkts					Counter32,
		 monStaRxBytes					Counter32,
		 monStaTxBCastPkts				Counter32,
		 monStaTxBCastBytes			Counter32,
		 monStaTxMCastPkts				Counter32,
		 monStaTxMCastBytes			Counter32,
		 monStaDataPkts				Counter32,
		 monStaCtrlPkts				Counter32,
		 monStaNumAssocRequests		Counter32,
		 monStaNumAuthRequests			Counter32,
		 monStaTxDeauthentications		Counter32,
		 monStaRxDeauthentications		Counter32,
		 monStaFrameRetryRate			Integer32,
		 monStaFrameLowSpeedRate		Integer32,
		 monStaFrameNonUnicastRate		Integer32,
		 monStaFrameFragmentationRate	Integer32,
		 monStaFrameBandwidthRate		Integer32,
		 monStaFrameRetryErrorRate		Integer32,
		 monStaBSSID				MacAddress,
		 monStaESSID				DisplayString,
		 monStaPhyType				ArubaPhyType,
		 monStaRSSI					Integer32,
		 monStaFrameReceiveErrorRate	Integer32
   }

	monitoredStaPhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			MAC address of the monitored station
            "
        ::= { wlsxMonStationStatsEntry 1}

	monStaChannelNum OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The channel the station is currently using.
            "
        ::= { wlsxMonStationStatsEntry 2 }

	monStaTxPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of packets transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 3 }

	monStaTxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of bytes transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 4 }

	monStaRxPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of packets received by this station.
            "
        ::= { wlsxMonStationStatsEntry 5 }

	monStaRxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of bytes received by this station.
            "
        ::= { wlsxMonStationStatsEntry 6 }

	monStaTxBCastPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of broadcast packets transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 7 }

	monStaTxBCastBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of broadcast bytes transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 8 }

	monStaTxMCastPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of multicast packets transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 9 }

	monStaTxMCastBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of multicast bytes transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 10 }

	monStaDataPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of Data packets transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 11 }

	monStaCtrlPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of Control packets transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 12 }

	monStaNumAssocRequests OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of Association requests transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 13 }

	monStaNumAuthRequests OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of Authentication requests transmitted by this station
            "
        ::= { wlsxMonStationStatsEntry 14 }

	monStaTxDeauthentications OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of Deauthentication frames transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 15 }

	monStaRxDeauthentications OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of Deauthentication frames received by this station.
            "
        ::= { wlsxMonStationStatsEntry 16 }

	monStaFrameRetryRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of retry 
			 packets as a percentage of the total packets
			 transmitted and received by this station.
            "
        ::= { wlsxMonStationStatsEntry 17 }

	monStaFrameLowSpeedRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
			 for B band) packets as a percentage of the total packets
			 transmitted and received by this station.
            "
        ::= { wlsxMonStationStatsEntry 18 }

	monStaFrameNonUnicastRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of broadcast and multicast
			 packets as a percentage of the total packets
			 transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 19 }

	monStaFrameFragmentationRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of fragments
			 as a percentage of the total packets
			 transmitted by this station.
            "
        ::= { wlsxMonStationStatsEntry 20 }

	monStaFrameBandwidthRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The bandwidth of this station in Kbps.
            "
        ::= { wlsxMonStationStatsEntry 21 }

	monStaFrameRetryErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS  	  deprecated
         DESCRIPTION
            "
			 The number of error packets
			 as a percentage of the total packets
			 received by this station.
            "
        ::= { wlsxMonStationStatsEntry 22 }

	monStaBSSID OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			BSSID of the station being monitored.
            "
        ::= { wlsxMonStationStatsEntry 23 }

	monStaESSID OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			ESSID of the station being monitored.
            "
        ::= { wlsxMonStationStatsEntry 24 }

	monStaPhyType OBJECT-TYPE
         SYNTAX       ArubaPhyType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			PHY type of the station being monitored.
            "
        ::= { wlsxMonStationStatsEntry 25 }

	monStaRSSI OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			SNR of the station being monitored.
            "
        ::= { wlsxMonStationStatsEntry 26 }

	monStaFrameReceiveErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 The number of error packets
			 as a percentage of the total packets
			 received by this station.
            "
        ::= { wlsxMonStationStatsEntry 27 }

-- This table breaks down the Station statistics into different
-- rate categories.

   wlsxMonStaRateStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonStaRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the Packet and Byte Counts for a monitored station
		represented in terms of rate categories.
		"
      ::= { wlsxMonStationStatsGroup 2} 

     wlsxMonStaRateStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonStaRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Data rate based packet and byte count entry for a monitored station"
	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
      ::= { wlsxMonStaRateStatsTable 1 } 
	
     WlsxMonStaRateStatsEntry ::=
     SEQUENCE {
		 monStaTxPktsAt1Mbps				Counter32,
		 monStaTxBytesAt1Mbps				Counter32,
		 monStaTxPktsAt2Mbps				Counter32,
		 monStaTxBytesAt2Mbps				Counter32,
		 monStaTxPktsAt5Mbps				Counter32,
		 monStaTxBytesAt5Mbps				Counter32,
		 monStaTxPktsAt11Mbps				Counter32,
		 monStaTxBytesAt11Mbps				Counter32,
		 monStaTxPktsAt6Mbps				Counter32,
		 monStaTxBytesAt6Mbps				Counter32,
		 monStaTxPktsAt12Mbps				Counter32,
		 monStaTxBytesAt12Mbps				Counter32,
		 monStaTxPktsAt18Mbps				Counter32,
		 monStaTxBytesAt18Mbps				Counter32,
		 monStaTxPktsAt24Mbps				Counter32,
		 monStaTxBytesAt24Mbps				Counter32,
		 monStaTxPktsAt36Mbps				Counter32,
		 monStaTxBytesAt36Mbps				Counter32,
		 monStaTxPktsAt48Mbps				Counter32,
		 monStaTxBytesAt48Mbps				Counter32,
		 monStaTxPktsAt54Mbps				Counter32,
		 monStaTxBytesAt54Mbps				Counter32,
		 monStaRxPktsAt1Mbps				Counter32,
		 monStaRxBytesAt1Mbps				Counter32,
		 monStaRxPktsAt2Mbps				Counter32,
		 monStaRxBytesAt2Mbps				Counter32,
		 monStaRxPktsAt5Mbps				Counter32,
		 monStaRxBytesAt5Mbps				Counter32,
		 monStaRxPktsAt11Mbps				Counter32,
		 monStaRxBytesAt11Mbps				Counter32,
		 monStaRxPktsAt6Mbps				Counter32,
		 monStaRxBytesAt6Mbps				Counter32,
		 monStaRxPktsAt12Mbps				Counter32,
		 monStaRxBytesAt12Mbps				Counter32,
		 monStaRxPktsAt18Mbps				Counter32,
		 monStaRxBytesAt18Mbps				Counter32,
		 monStaRxPktsAt24Mbps				Counter32,
		 monStaRxBytesAt24Mbps				Counter32,
		 monStaRxPktsAt36Mbps				Counter32,
		 monStaRxBytesAt36Mbps				Counter32,
		 monStaRxPktsAt48Mbps				Counter32,
		 monStaRxBytesAt48Mbps				Counter32,
		 monStaRxPktsAt54Mbps				Counter32,
		 monStaRxBytesAt54Mbps				Counter32,
		 monStaTxPktsAt9Mbps				Counter32,
		 monStaTxBytesAt9Mbps				Counter32,
		 monStaRxPktsAt9Mbps				Counter32,
		 monStaRxBytesAt9Mbps				Counter32
     }

     monStaTxPktsAt1Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Transmitted by the 
			 station at 1Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 1 }

     monStaTxBytesAt1Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 1Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 2 }

     monStaTxPktsAt2Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 2Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 3 }

     monStaTxBytesAt2Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 2Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 4 }

     monStaTxPktsAt5Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 5Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 5 }

     monStaTxBytesAt5Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 5Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 6 }

     monStaTxPktsAt11Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 11Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 7 }

     monStaTxBytesAt11Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 11Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 8 }

     monStaTxPktsAt6Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 6Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 9 }

     monStaTxBytesAt6Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 6Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 10 }

     monStaTxPktsAt12Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 12Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 11 }

     monStaTxBytesAt12Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 12Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 12 }

     monStaTxPktsAt18Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 18Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 13 }

     monStaTxBytesAt18Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 18Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 14 }

     monStaTxPktsAt24Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 24Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 15 }

     monStaTxBytesAt24Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 24Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 16 }

     monStaTxPktsAt36Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 36Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 17 }

     monStaTxBytesAt36Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 36Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 18 }

     monStaTxPktsAt48Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 48Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 19 }

     monStaTxBytesAt48Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 48Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 20 }

     monStaTxPktsAt54Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets transmitted by the 
			 station at 54Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 21 }

     monStaTxBytesAt54Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets transmitted by the 
			 station at 54Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 22 }

     monStaRxPktsAt1Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 1Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 23 }

     monStaRxBytesAt1Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 1Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 24 }

     monStaRxPktsAt2Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 2Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 25 }

     monStaRxBytesAt2Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 2Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 26 }

     monStaRxPktsAt5Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 5Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 27 }

     monStaRxBytesAt5Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 5Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 28 }

     monStaRxPktsAt11Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 11Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 29 }

     monStaRxBytesAt11Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 11Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 30 }

     monStaRxPktsAt6Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 6Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 31 }

     monStaRxBytesAt6Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 6Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 32 }

     monStaRxPktsAt12Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 12Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 33 }

     monStaRxBytesAt12Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 12Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 34 }

     monStaRxPktsAt18Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 18Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 35 }

     monStaRxBytesAt18Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 18Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 36 }

     monStaRxPktsAt24Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 24Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 37 }

     monStaRxBytesAt24Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 24Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 38 }

     monStaRxPktsAt36Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 36Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 39 }

     monStaRxBytesAt36Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 36Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 40 }

     monStaRxPktsAt48Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 48Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 41 }

     monStaRxBytesAt48Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 48Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 42 }

     monStaRxPktsAt54Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 54Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 43 }

     monStaRxBytesAt54Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 54Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 44 }


     monStaTxPktsAt9Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Transmitted by the 
			 station at 9Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 45 }

     monStaTxBytesAt9Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Transmitted by the 
			 station at 9Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 46 }


     monStaRxPktsAt9Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Packets Received by the 
			 station at 9Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 47 }

     monStaRxBytesAt9Mbps OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Octets Received by the 
			 station at 9Mbps rate.
            "
        ::= { wlsxMonStaRateStatsEntry 48 }


-- This table breaks down the Station statistics based on the
-- Destination Address Types. 

   wlsxMonStaDATypeStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonStaDATypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the Packet and Byte Counts for a monitored station but
		but broken down in terms of Destination Address Type. 
		"
      ::= { wlsxMonStationStatsGroup 3} 

     wlsxMonStaDATypeStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonStaDATypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Data rate based packet and byte count entry for a monitored station"
	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
      ::= { wlsxMonStaDATypeStatsTable 1 } 
	
     WlsxMonStaDATypeStatsEntry ::=
     SEQUENCE {
		 monStaTxDABroadcastPkts		Counter32  ,
		 monStaTxDABroadcastBytes		Counter32  ,
		 monStaTxDAMulticastPkts		Counter32  ,
		 monStaTxDAMulticastBytes		Counter32  ,
		 monStaTxDAUnicastPkts			Counter32  ,
		 monStaTxDAUnicastBytes		Counter32  

     }

     monStaTxDABroadcastPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Broadcast packets 
			 transmitted by this Station.
            "
        ::= { wlsxMonStaDATypeStatsEntry 1 }

     monStaTxDABroadcastBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Broadcast Bytes 
			 transmitted by this Station.
            "
        ::= { wlsxMonStaDATypeStatsEntry 2 }

     monStaTxDAMulticastPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Multicast packets 
			 transmitted by this station.
            "
        ::= { wlsxMonStaDATypeStatsEntry 3 }

     monStaTxDAMulticastBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of Multicast Bytes 
			 transmitted by this station.
            "
        ::= { wlsxMonStaDATypeStatsEntry 4 }

     monStaTxDAUnicastPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total of Unicast packets 
			 transmitted by this station.
            "
        ::= { wlsxMonStaDATypeStatsEntry 5 }

     monStaTxDAUnicastBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the total of Unicast Bytes 
			 transmitted by this station.
            "
        ::= { wlsxMonStaDATypeStatsEntry 6 }

-- This table breaks down the Station statistics based on the
-- the Type of the Packet. 

   wlsxMonStaFrameTypeStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonStaFrameTypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the Packet and Byte Counts for monitored
		stations but broken down into different Frame Types. 
		"
      ::= { wlsxMonStationStatsGroup 4} 

     wlsxMonStaFrameTypeStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonStaFrameTypeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Frame Type based packet and byte count entry for a monitored station"
	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
      ::= { wlsxMonStaFrameTypeStatsTable 1 } 
	
     WlsxMonStaFrameTypeStatsEntry ::=
     SEQUENCE {
		 monStaTxMgmtPkts		Counter32  ,
		 monStaTxMgmtBytes		Counter32  ,
		 monStaTxCtrlPkts		Counter32  ,
		 monStaTxCtrlBytes		Counter32  ,
		 monStaTxDataPkts		Counter32  ,
		 monStaTxDataBytes		Counter32  ,
		 monStaRxMgmtPkts		Counter32  ,
		 monStaRxMgmtBytes		Counter32  ,
		 monStaRxCtrlPkts		Counter32  ,
		 monStaRxCtrlBytes		Counter32  ,
		 monStaRxDataPkts		Counter32  ,
		 monStaRxDataBytes		Counter32  

     }

     monStaTxMgmtPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the transmitted Management packets 
			 from a station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 1 }

     monStaTxMgmtBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the transmitted Management Bytes 
			 from a station
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 2 }

     monStaTxCtrlPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the transmitted Control packets 
			 from a station
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 3 }

     monStaTxCtrlBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the transmitted Control Bytes 
			 from a station
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 4 }

     monStaTxDataPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the transmitted Data packets 
			 from a station
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 5 }

     monStaTxDataBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the transmitted Data Bytes 
			 observed from this station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 6 }

     monStaRxMgmtPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of received Management packets 
			 at a station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 7 }

     monStaRxMgmtBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of received Management Bytes 
			 at a station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 8 }

     monStaRxCtrlPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of received Control packets 
			 at a station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 9 }

     monStaRxCtrlBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of received Control Bytes 
			 at a station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 10 }

     monStaRxDataPkts OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of received Data packets 
			 at a station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 11 }

     monStaRxDataBytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of received Data Bytes 
			 at a station.
            "
        ::= { wlsxMonStaFrameTypeStatsEntry 12 }


-- This table breaks down the Station statistics received or transmitted by a 
-- station into packet size buckets. 

   wlsxMonStaPktSizeStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonStaPktSizeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the Packet and Byte Counts for monitored
		stations but broken down into different Packet Sizes. 
		"
      ::= { wlsxMonStationStatsGroup 5} 

     wlsxMonStaPktSizeStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonStaPktSizeStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Packet Size based packet count entry for a monitored station"
	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
      ::= { wlsxMonStaPktSizeStatsTable 1 } 
	
     WlsxMonStaPktSizeStatsEntry ::=
     SEQUENCE {
		 monStaTxPkts63Bytes		Counter32  ,
		 monStaTxPkts64To127		Counter32  ,
		 monStaTxPkts128To255		Counter32  ,
		 monStaTxPkts256To511		Counter32  ,
		 monStaTxPkts512To1023	Counter32  ,
		 monStaTxPkts1024To1518	Counter32  ,
		 monStaRxPkts63Bytes		Counter32  ,
		 monStaRxPkts64To127		Counter32  ,
		 monStaRxPkts128To255		Counter32  ,
		 monStaRxPkts256To511		Counter32  ,
		 monStaRxPkts512To1023	Counter32  ,
		 monStaRxPkts1024To1518	Counter32  

     }

     monStaTxPkts63Bytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets transmitted by the 
			 station that were less than 64 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 1 }

     monStaTxPkts64To127 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets transmitted by the 
			 station that were between 64 and 127 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 2 }

     monStaTxPkts128To255 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets transmitted by the 
			 station that were between 128 and 255 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 3 }

     monStaTxPkts256To511 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets transmitted by the 
			 station that were between 256 and 511 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 4 }

     monStaTxPkts512To1023 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets transmitted by the 
			 station that were between 512 and 1023 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 5 }

     monStaTxPkts1024To1518 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets transmitted by the 
			 station that were between 1024 and 1518 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 6 }

     monStaRxPkts63Bytes OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets Received by the 
			 station that were less than 64 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 7 }

     monStaRxPkts64To127 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets Received by the 
			 station that were between 64 and 127 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 8 }

     monStaRxPkts128To255 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets Received by the 
			 station that were between 128 and 255 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 9 }

     monStaRxPkts256To511 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets Received by the 
			 station that were between 256 and 511 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 10 }

     monStaRxPkts512To1023 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets Received by the 
			 station that were between 512 and 1023 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 11 }

     monStaRxPkts1024To1518 OBJECT-TYPE
         SYNTAX       Counter32  
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This attribute indicates the number of packets Received by the 
			 station that were between 1024 and 1518 bytes long.
            "
        ::= { wlsxMonStaPktSizeStatsEntry 12 }


-- Info group contains tables for monitored APs and stations

   wlsxMonAccessPointInfoGroup  OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 1 }
   wlsxMonStationInfoGroup  OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 2 }

   wlsxMonAPInfoTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonAPInfoEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This lists all of the Access Points being monitored by 
			the controller. 
		"
      ::= { wlsxMonAccessPointInfoGroup 1 } 

   wlsxMonAPInfoEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonAPInfoEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Access Point Info entry"
	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
      ::= { wlsxMonAPInfoTable 1 } 

   WlsxMonAPInfoEntry ::=
     SEQUENCE {
		 monAPInfoPhyType				ArubaPhyType,
		 monAPInfoCurrentChannel		Unsigned32,
		 monAPInfoClassification		ArubaRogueApType,
		 monAPInfoESSID                 DisplayString,
		 monAPInfoRSSI                  Integer32,
		 monAPInfoMonitorTime           TimeTicks,
		 monAPInfoInactivityTime        TimeTicks,
		 monAPInfoSnrSignalPkts         Integer32,
		 monAPInfoSnrSampleTime         Integer32,
		 monAPInfoStatus                INTEGER,
		 monAPInfoConfidence			Integer32,
		 monAPInfoMatchType				ArubaAPMatchType,
		 monAPInfoMatchMethod			ArubaAPMatchMethod,
		 monAPInfoHTMode				ArubaHTMode,
		 monAPInfoEncryptionType        ArubaMonEncryptionType,
		 monAPInfoWPAUnicastCipher      ArubaMonEncryptionCipher,
		 monAPInfoWPAAuthAlgorithm      ArubaMonAuthAlgorithm,
		 monAPInfoIBSS                  TruthValue
   }

	monAPInfoPhyType OBJECT-TYPE
         SYNTAX       ArubaPhyType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			PHY type of the access point being monitored.
            "
        ::= { wlsxMonAPInfoEntry 1 }


	monAPInfoCurrentChannel OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Channel the monitored AP is using.
            "
        ::= { wlsxMonAPInfoEntry 2 }

	monAPInfoClassification OBJECT-TYPE
         SYNTAX       ArubaRogueApType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This attribute indicates the type of the AP.
            "
        ::= { wlsxMonAPInfoEntry 3 }

	monAPInfoESSID OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			ESSID of the access point being monitored.
            "
        ::= { wlsxMonAPInfoEntry 4 }

	monAPInfoRSSI OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			SNR of the access point being monitored.
            "
        ::= { wlsxMonAPInfoEntry 5 }

	monAPInfoMonitorTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
             This attribute indicates how long the access point has been
			 monitored.
            "
        ::= { wlsxMonAPInfoEntry 6 }

	monAPInfoInactivityTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
             This attribute indicates how long the access point has been
			 inactive.
            "
        ::= { wlsxMonAPInfoEntry 7 }

   monAPInfoSnrSignalPkts OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Number of Signal Packets observed by the Monitoring AP 
			during this sample time.
            "
        ::= { wlsxMonAPInfoEntry 8 }

   monAPInfoSnrSampleTime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Sample Time in which SNR data was collected.
            "
        ::= { wlsxMonAPInfoEntry 9 }

   monAPInfoStatus OBJECT-TYPE
         SYNTAX       INTEGER { up(1), down(2) }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates whether this AP is considered to be up or down.
            "
        ::= { wlsxMonAPInfoEntry 10 }

   monAPInfoConfidence OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates the confidence that a suspected rogue AP is in fact a
			rogue in terms of percentage.
            "
        ::= { wlsxMonAPInfoEntry 11 }

   monAPInfoMatchType OBJECT-TYPE
         SYNTAX       ArubaAPMatchType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The method used to classify the AP as a rogue or suspected rogue AP.
            "
        ::= { wlsxMonAPInfoEntry 12 }

   monAPInfoMatchMethod OBJECT-TYPE
         SYNTAX       ArubaAPMatchMethod
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates how the match occurred for rogue or suspect-rogue
			classification: an exact or +1 or -1 MAC match.
            "
        ::= { wlsxMonAPInfoEntry 13 }

   monAPInfoHTMode OBJECT-TYPE
         SYNTAX       ArubaHTMode
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates the HT mode of the monitored AP, if any.
            "
        ::= { wlsxMonAPInfoEntry 14 }

   monAPInfoEncryptionType OBJECT-TYPE
         SYNTAX       ArubaMonEncryptionType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates the Encryption type of the monitored AP.
            "
        ::= { wlsxMonAPInfoEntry 15 }

   monAPInfoWPAUnicastCipher OBJECT-TYPE
         SYNTAX       ArubaMonEncryptionCipher
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates the WPA/WPA2 unicast cipher supported by the monitored AP.
            If multiple ciphers are supported, the weakest will be indicated. 
            "
        ::= { wlsxMonAPInfoEntry 16 }

   monAPInfoWPAAuthAlgorithm OBJECT-TYPE
         SYNTAX       ArubaMonAuthAlgorithm
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates the WPA/WPA2 authentication algorithm supported by the monitored AP.
            If multiple authentication algorithms are supported, the weakest will be indicated. 
            "
        ::= { wlsxMonAPInfoEntry 17 }

   monAPInfoIBSS OBJECT-TYPE
         SYNTAX       TruthValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates if the monitored AP is part of an adhoc network.
            "
        ::= { wlsxMonAPInfoEntry 18 }

   wlsxMonStationInfoTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MonStationInfoEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists statistics of all the wireless stations 
			being monitored. 
		"
      ::= { wlsxMonStationInfoGroup 1} 

   wlsxMonStationInfoEntry OBJECT-TYPE 
	  SYNTAX       MonStationInfoEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Info Entry"
	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
      ::= { wlsxMonStationInfoTable 1 } 

   MonStationInfoEntry ::=
     SEQUENCE {
		 monStaInfoChannelNum			Unsigned32,
		 monStaInfoBSSID				MacAddress,
		 monStaInfoESSID				DisplayString,
		 monStaInfoPhyType				ArubaPhyType,
		 monStaInfoRSSI					Integer32,
		 monStaInfoClassification		ArubaStationType,
		 monStaInfoMonitorTime			TimeTicks,
		 monStaInfoInactivityTime		TimeTicks,
		 monStaInfoSnrSignalPkts		Integer32,
		 monStaInfoSnrSampleTime        Integer32,
		 monStaInfoStatus               INTEGER,
		 monStaInfoHTMode				ArubaHTMode
   }

	monStaInfoChannelNum OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The channel the station is currently using.
            "
        ::= { wlsxMonStationInfoEntry 1 }

	monStaInfoBSSID OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			BSSID of the station being monitored.
            "
        ::= { wlsxMonStationInfoEntry 2 }

	monStaInfoESSID OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			ESSID of the station being monitored.
            "
        ::= { wlsxMonStationInfoEntry 3 }

	monStaInfoPhyType OBJECT-TYPE
         SYNTAX       ArubaPhyType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			PHY type the station being monitored.
            "
        ::= { wlsxMonStationInfoEntry 4 }

	monStaInfoRSSI OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			SNR of the station being monitored.
            "
        ::= { wlsxMonStationInfoEntry 5 }

	monStaInfoClassification OBJECT-TYPE
         SYNTAX       ArubaStationType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            "
        ::= { wlsxMonStationInfoEntry 6 }

	monStaInfoMonitorTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
             This attribute indicates how long the station has been
			 monitored.
            "
        ::= { wlsxMonStationInfoEntry 7 }

	monStaInfoInactivityTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
             This attribute indicates how long the station has been
			 inactive.
            "
        ::= { wlsxMonStationInfoEntry 8 }

   monStaInfoSnrSignalPkts OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Number of Signal Packets observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxMonStationInfoEntry 9 }

   monStaInfoSnrSampleTime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Sample Time in which SNR data was collected.
            "
        ::= { wlsxMonStationInfoEntry 10 }

   monStaInfoStatus OBJECT-TYPE
         SYNTAX       INTEGER { up(1), down(2) }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates whether this station is considered up or down.
            "
        ::= { wlsxMonStationInfoEntry 11 }

   monStaInfoHTMode OBJECT-TYPE
         SYNTAX       ArubaHTMode
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates the HT mode of the station, if any.
            "
        ::= { wlsxMonStationInfoEntry 12 }

-- Event table contains the event ID and the number of events of that type
-- raised so far

   wlsxMonEventCountTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MonEventCountEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists counts of Events generated by the APs.
		"
      ::= { wlsxMonStationStatsGroup 6} 

   wlsxMonEventCountEntry OBJECT-TYPE 
	  SYNTAX       MonEventCountEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Event Count Entry"
	  INDEX {monEventID}
      ::= { wlsxMonEventCountTable 1 } 

   MonEventCountEntry ::=
     SEQUENCE {
		 monEventID			Unsigned32,
		 monEventCount				Unsigned32
   }

	monEventID OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
		Event ID
            "
        ::= { wlsxMonEventCountEntry 1 }

	monEventCount OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
		Event Count
            "
        ::= { wlsxMonEventCountEntry 2 }

-- This table breaks down the station statistics observed into different
-- HT rate categories.

   wlsxMonStationHTRateStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxMonStationHTRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		This table contains all the monitored AP Packet and Byte Counts
		but represented in terms of HT rate categories.
		"
	
      ::= { wlsxMonStationStatsGroup 7 } 

     wlsxMonStationHTRateStatsEntry OBJECT-TYPE 
	  SYNTAX       WlsxMonStationHTRateStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "HT Data rate based packet and byte count entry for a monitored station"
	  INDEX { monPhyAddress, monRadioNumber, monitoredStaPhyAddress, monHTRate }
      ::= { wlsxMonStationHTRateStatsTable 1 } 
	
     WlsxMonStationHTRateStatsEntry ::=
     SEQUENCE {
		 monStaTxHTPkts				Counter32,
		 monStaTxHTBytes			Counter32,
		 monStaRxHTPkts				Counter32,
		 monStaRxHTBytes			Counter32
	 }

	 monStaTxHTPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of packets transmitted at the indicated rate 
            "
        ::= { wlsxMonStationHTRateStatsEntry 1 }

	 monStaTxHTBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of bytes transmitted at the indicated rate 
            "
        ::= { wlsxMonStationHTRateStatsEntry 2 }

	 monStaRxHTPkts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of packets received at the indicated rate 
            "
        ::= { wlsxMonStationHTRateStatsEntry 3 }

	 monStaRxHTBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of bytes received at the indicated rate 
            "
        ::= { wlsxMonStationHTRateStatsEntry 4 }

END