path: root/MIBS/audiocodes/AC-PSTN-MIB

AC-PSTN-MIB DEFINITIONS ::= BEGIN


    IMPORTS
       

        OBJECT-TYPE, 
        MODULE-IDENTITY                             FROM SNMPv2-SMI
        TAddress, 
        DisplayString, 
        DateAndTime, TEXTUAL-CONVENTION             FROM SNMPv2-TC
        IpAddress                                   FROM RFC1155-SMI
        Unsigned32,
        Integer32,
        enterprises                                 FROM SNMPv2-SMI
		RowStatus      			 					FROM SNMPv2-TC
		SnmpAdminString								FROM SNMP-FRAMEWORK-MIB
		InetAddressType, InetAddress        FROM INET-ADDRESS-MIB
		MODULE-COMPLIANCE, OBJECT-GROUP,
		NOTIFICATION-GROUP                  FROM SNMPv2-CONF
		audioCodes,       
        acRegistrations,
        acGeneric, 
        acProducts,acBoardMibs		FROM AUDIOCODES-TYPES-MIB;

       
acPSTN  MODULE-IDENTITY       
    LAST-UPDATED "201209241539Z"          --Monday, September 24 2012
    ORGANIZATION "AudioCodes Ltd"
    CONTACT-INFO
    "Postal: Support
	     AudioCodes LTD
             1 Hayarden Street
             Airport City 
	     Lod, ISRAEL 70151
     Tel:    972-3-9764000
     Fax:    972-3-9764040
     Email:  support@audiocodes.com
     Web:    www.audiocodes.com"		

    DESCRIPTION       
    ""



    ::= {acBoardMibs 9}  








     acPSTNConfiguration OBJECT IDENTIFIER ::= {acPSTN 1}


     acTrunkConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 1}


     acTrunk OBJECT IDENTIFIER ::= {acTrunkConfig 1}


     -- ****************************************
     -- acTrunk table declaration
     -- ****************************************
     acTrunkTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acTrunk 1}



     -- ****************************************
     -- acTrunk table entry
     -- ****************************************
     acTrunkEntry OBJECT-TYPE
       SYNTAX AcTrunkEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acTrunkIndex}
       ::= {acTrunkTable 1}



     -- ****************************************
     -- acTrunk TABLE
     -- ****************************************
     AcTrunkEntry ::= SEQUENCE {
       acTrunkIndex                                    Unsigned32,
       acTrunkAdministrativeState                      INTEGER,
       acTrunkProtocolType                             INTEGER,
       acTrunkClockMaster                              INTEGER,
       acTrunkFramingMethod                            INTEGER,
       acTrunkLineCode                                 INTEGER,
       acTrunkTraceLevel                               INTEGER,
       acTrunkDialPlanName                             SnmpAdminString,
       acTrunkLineType                                 INTEGER,
       acTrunkAutoClockPriority                        Unsigned32,
       acTrunkDeactivate                               INTEGER,
       acTrunkLoopbackConfig                           INTEGER
     }



     acTrunkIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..83)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Trunk ID at board in which the call is taking place.
AC INI-Param: N/A"
       ::= {acTrunkEntry 1}



     acTrunkAdministrativeState OBJECT-TYPE
       SYNTAX INTEGER {
                  locked(0)
,
                  unLocked(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Trunk Administrative State.
Access: Online.
AC INI-Param: N/A"
       ::= {acTrunkEntry 2}



     acTrunkProtocolType OBJECT-TYPE
       SYNTAX INTEGER {
                  nONE(0)
,
                  e1EuroISDN(1)
,
                  t1Cas(2)
,
                  t1RawCas(3)
,
                  t1Transparent(4)
,
                  e1Transparent31(5)
,
                  e1Transparent30(6)
,
                  e1Mfcr2(7)
,
                  e1CasR2(8)
,
                  e1RawCAS(9)
,
                  t1-NI2ISDN(10)
,
                  t1-4EssISDN(11)
,
                  t1-5Ess-9-ISDN(12)
,
                  t1-5Ess-10-ISDN(13)
,
                  t1-Dms100-ISDN(14)
,
                  j1-TRANSPARENT(15)
,
                  t1-NTT-ISDN(16)
,
                  e1-AUSTEL-ISDN(17)
,
                  e1-HKT-ISDN(18)
,
                  e1-KOR-ISDN(19)
,
                  t1-HKT-ISDN(20)
,
                  e1-QSIG(21)
,
                  e1-TNZ-22(22)
,
                  t1-EXTRA-23(23)
,
                  t1-IUA(28)
,
                  e1-IUA(29)
,
                  e1-EXTRA-30(30)
,
                  e1-FRENCH-VN3-ISDN(31)
,
                  t1-EXTRA-32(32)
,
                  eXTRA-33(33)
,
                  t1-EURO-ISDN(34)
,
                  t1-DMS100-MERIDIAN-ISDN(35)
,
                  t1-NI1-ISDN(36)
,
                  e1-DUA(37)
,
                  e1-Q931-PACKETS(38)
,
                  t1-Q931-PACKETS(39)
,
                  e1-NI2-ISDN(40)
,
                  e1-CAS-R15(41)
,
                  v5(43)
,
                  bRI-EURO-ISDN(50)
,
                  bRI-NI-2(51)
,
                  bRI-DMS100(52)
,
                  bRI-5ESS(53)
,
                  bRI-QSIG(54)
,
                  bRI-VNG(55)
,
                  bRI-NTT(56)
,
                  bRI-IUA(57)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to set the PSTN protocol to be used for this trunk. Relevant
only when TDMBusType=acFRAMERS (2). 
Either:
NONE = 0 
E1_EURO_ISDN = 1 
T1_CAS = 2 
T1_RAW_CAS = 3 
T1_TRANSPARENT = 4 
E1_TRANSPARENT_31 = 5 
E1_TRANSPARENT_30 = 6 
E1_MFCR2 = 7 
E1_CAS = 8 
E1_RAW_CAS = 9 
T1_NI2_ISDN = 10 
T1_4ESS_ISDN = 11 
T1_5ESS_9_ISDN = 12 
T1_5ESS_10_ISDN = 13 
T1_DMS100_ISDN = 14 
J1_TRANSPARENT = 15 
T1_NTT_ISDN = 16 
E1_AUSTEL_ISDN = 17 
E1_HKT_ISDN = 18 
E1_KOR_ISDN = 19 
T1_HKT_ISDN = 20 
E1_QSIG = 21 
E1_TNZ_ISDN = 22 
T1_QSIG = 23 
T1_IUA = 28 
E1_IUA = 29 
E1_FRENCH_VN6_ISDN = 30 
E1_FRENCH_VN3_ISDN = 31 
T1_EURO_ISDN = 34 
T1_DMS100_MERIDIAN_ISDN = 35 
T1_NI1_ISDN = 36 
E1_DUA = 37 
E1_Q931_PACKETS = 38
T1_Q931_PACKETS = 39
E1_NI2_ISDN = 40
E1-CAS-R15 = 41
V5 = 43
BRI-EURO-ISDN = 50
BRI-NI-2 = 51
BRI-DMS100 = 52
BRI-5ESS = 53
BRI-QSIG = 54
BRI-VNG = 55
BRI-NTT = 56
BRI-IUA = 57.
.
Access: Online.
AC INI-Param: PROTOCOLTYPE"
       ::= {acTrunkEntry 3}



     acTrunkClockMaster OBJECT-TYPE
       SYNTAX INTEGER {
                  acCLOCK-MASTER-OFF(0)
,
                  acCLOCK-MASTER-ON(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to select the trunk clock source. 

0 = acCLOCK_MASTER_OFF (clock recovered from the line)
1 = acCLOCK_MASTER_ON (the trunk clock source is provided by
the internal/TDM bus clock source depending on the parameter
TDM Bus Clock Source).
Access: Online.
AC INI-Param: CLOCKMASTER"
       ::= {acTrunkEntry 4}



     acTrunkFramingMethod OBJECT-TYPE
       SYNTAX INTEGER {
                  eXTENDED-SUPER-FRAME(0)
,
                  sUPER-FRAME(1)
,
                  e1-FRAMING-DDF(2)
,
                  e1-FRAMING-MFF-CRC4(3)
,
                  e1-FRAMING-MFF-CRC4-EXT(4)
,
                  t1-FRAMING-F4(6)
,
                  t1-FRAMING-F12(7)
,
                  t1-FRAMING-ESF(8)
,
                  t1-FRAMING-ESF-CRC6 (9)
,
                  t1-FRAMING-F72(10)
,
                  t1-FRAMING-ESF-CRC6-JT(11)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the Framing method to be used for this trunk.
Access: Online.
AC INI-Param: N/A"
       ::= {acTrunkEntry 5}



     acTrunkLineCode OBJECT-TYPE
       SYNTAX INTEGER {
                  acB8ZS(0)
,
                  acAMI(1)
,
                  acHDB3(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Use to select line code. B8ZS or AMI for T1 spans and HDB3 or
AMI for E1 spans.

0 = Use B8ZS line code (for T1 trunks only = default)
1 = Use AMI line code (for T1 or E1 trunks)
2 = Use HDB3 line code (for E1 trunks only).
Access: Online.
AC INI-Param: LINECODE"
       ::= {acTrunkEntry 6}



     acTrunkTraceLevel OBJECT-TYPE
       SYNTAX INTEGER {
                  acNO-TRACE(0)
,
                  acFULL-ISDN-TRACE(1)
,
                  acLAYER3-ISDN-TRACE(2)
,
                  acONLY-ISDN-Q931-MSGS-TRACE(3)
,
                  acLAYER3-ISDN-TRACE-NO-DUPLICATION(4)
,
                  acFULL-ISDN-TRACE-WITH-DUPLICATION(5)
,
                  acISDN-Q931-RAW-DATA-TRACE(6)
,
                  acISDN-Q921-RAW-DATA-TRACE(7)
,
                  acISDN-Q931-Q921-RAW-DATA-TRACE(8)
,
                  acSS7-MTP2(10)
,
                  acSS7-MTP2-AND-APPLI(11)
,
                  acSS7-MTP2-SL-L3-NO-MSU(12)
,
                  acSS7-AAL(15)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the Trace level:
acNO_TRACE = 0
acFULL_ISDN_TRACE = 1
acLAYER3_ISDN_TRACE = 2
acONLY_ISDN_Q931_MSGS_TRACE = 3
acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4
acFULL_ISDN_TRACE_WITH_DUPLICATION = 5
acISDN_Q931_RAW_DATA_TRACE = 6
acISDN_Q921_RAW_DATA_TRACE = 7
acISDN_Q931_Q921_RAW_DATA_TRACE = 8
acSS7_MTP2 = 10
acSS7_MTP2_AND_APPLI = 11
acSS7_MTP2_SL_L3_NO_MSU = 12
acSS7_AAL = 15.
Access: Online.
AC INI-Param: TRACELEVEL"
       ::= {acTrunkEntry 7}



     acTrunkDialPlanName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..11))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the Dial Plan name that will be used on the specific trunk.

Range = string 11 characters.
Access: Instant.
AC INI-Param: CasTrunkDialPlanName"
       ::= {acTrunkEntry 8}



     acTrunkLineType OBJECT-TYPE
       SYNTAX INTEGER {
                  lineTypeE1(10)
,
                  lineTypeT1(11)
,
                  lineTypeBRI(12)
,
                  lineTypeUnknown(21)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Line type.
lineTypeBRI(12) - If the physical type is BRI.
lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are
other lines that are already configured to either E1 or T1.
lineTypeUnknown(-1) - For non BRI IF when no lines are configured.
AC INI-Param: N/A"
       ::= {acTrunkEntry 9}



     acTrunkAutoClockPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the trunk priority for auto-clock fallback (Priority
range: 0 - 100 (0 - 99 are priority settings, in which 0 =
highest Priority and is the default setting
 100 = Do not choose this trunk).
Access: Online.
AC INI-Param: AutoClockTrunkPriority"
       ::= {acTrunkEntry 10}



     acTrunkDeactivate OBJECT-TYPE
       SYNTAX INTEGER {
                  notAvailable(0)
,
                  deActivated(1)
,
                  activated(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Deactivating a trunk forces AIS alarm on that trunk. Deactivation
is used for trunk maintenance without locking the trunk.
Activating the trunk will stop the alarm on the trunk.
notAvailable(0) appears when the trunk is locked. The trunk
can't be SET to this state.
Access: Online.
AC INI-Param: N/A"
       ::= {acTrunkEntry 11}



     acTrunkLoopbackConfig OBJECT-TYPE
       SYNTAX INTEGER {
                  noLoop(0)
,
                  lineLoop(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This variable represents the loopback state of the trunk.
Access: Offline.
AC INI-Param: N/A"
       ::= {acTrunkEntry 12}



     acTrunkLine OBJECT IDENTIFIER ::= {acTrunkConfig 2}


     -- ****************************************
     -- acTrunkLine table declaration
     -- ****************************************
     acTrunkLineTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkLineEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           " "
       ::= {acTrunkLine 1}



     -- ****************************************
     -- acTrunkLine table entry
     -- ****************************************
     acTrunkLineEntry OBJECT-TYPE
       SYNTAX AcTrunkLineEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "configuration of the DS1 interface. "
       INDEX {acTrunkIndex}
       ::= {acTrunkLineTable 1}



     -- ****************************************
     -- acTrunkLine TABLE
     -- ****************************************
     AcTrunkLineEntry ::= SEQUENCE {
       acTrunkLineBuildOutLoss                         INTEGER,
       acTrunkLineBuildOutOverwrite                    INTEGER,
       acTrunkLineBuildOutXPM0                         Unsigned32,
       acTrunkLineBuildOutXPM1                         Unsigned32,
       acTrunkLineBuildOutXPM2                         Unsigned32
     }



     acTrunkLineBuildOutLoss OBJECT-TYPE
       SYNTAX INTEGER {
                  ac0DB(0)
,
                  ac7-5DB(1)
,
                  ac15DB(2)
,
                  ac22-5DB(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to select the line build out loss to be used for this trunk.

0 = 0 dB
1 = 7.5 dB
2 = 15 dB
3 = 22.5 dB.
Access: Online.
AC INI-Param: LINEBUILDOUT.LOSS"
       ::= {acTrunkLineEntry 1}



     acTrunkLineBuildOutOverwrite OBJECT-TYPE
       SYNTAX INTEGER {
                  acNO-OVER-WRITE(0)
,
                  acOVER-WRITE(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to overwrite the Framer's XPM registers values (these registers
control the line pulse shape).

0 = No overwrite
1 = Overwrite.
Access: Online.
AC INI-Param: LINEBUILDOUT.OVERWRITE"
       ::= {acTrunkLineEntry 2}



     acTrunkLineBuildOutXPM0 OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to control the Framer's XPM0 register value (line pulse
shape control). 
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.

Should be used only by expert users.

Range = 0 to 255.
Access: Online.
AC INI-Param: LINEBUILDOUT.XPM0"
       ::= {acTrunkLineEntry 3}



     acTrunkLineBuildOutXPM1 OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to control the Framer's XPM1 register value (line pulse
shape control).
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert users.

Range = 0 to 255.
Access: Online.
AC INI-Param: LINEBUILDOUT.XPM1"
       ::= {acTrunkLineEntry 4}



     acTrunkLineBuildOutXPM2 OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to control the Framer's XPM2 register value (line pulse
shape control). 
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.

Should be used only by expert users.

Range = 0 to 255.
Access: Online.
AC INI-Param: LINEBUILDOUT.XPM2"
       ::= {acTrunkLineEntry 5}



     acTrunkISDN OBJECT IDENTIFIER ::= {acTrunkConfig 3}


     acTrunkISDNCommon OBJECT IDENTIFIER ::= {acTrunkISDN 1}


     -- ****************************************
     -- acTrunkISDNCommon table declaration
     -- ****************************************
     acTrunkISDNCommonTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkISDNCommonEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acTrunkISDNCommon 1}



     -- ****************************************
     -- acTrunkISDNCommon table entry
     -- ****************************************
     acTrunkISDNCommonEntry OBJECT-TYPE
       SYNTAX AcTrunkISDNCommonEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acTrunkIndex}
       ::= {acTrunkISDNCommonTable 1}



     -- ****************************************
     -- acTrunkISDNCommon TABLE
     -- ****************************************
     AcTrunkISDNCommonEntry ::= SEQUENCE {
       acTrunkISDNCommonTerminationSide                INTEGER,
       acTrunkISDNCommonQ931LayerResponseBehavior      Integer32,
       acTrunkISDNCommonIncomingCallsBehavior          Unsigned32,
       acTrunkISDNCommonOutgoingCallsBehavior          Unsigned32,
       acTrunkISDNCommonGeneralCCBehavior              Unsigned32,
       acTrunkISDNCommonIuaInterfaceId                 Integer32,
       acTrunkISDNCommonDuplicateQ931BuffMode          Unsigned32,
       acTrunkISDNCommonBRILayer2Mode                  INTEGER,
       acTrunkISDNCommonNSBehaviour2                   Unsigned32,
       acTrunkISDNCommonRestartBChannel                Integer32
     }



     acTrunkISDNCommonTerminationSide OBJECT-TYPE
       SYNTAX INTEGER {
                  acUSER-TERMINATION-SIDE(0)
,
                  acNETWORK-TERMINATION-SIDE(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to set the ISDN Termination to either User or Network.
Termination = For ISDN only.
User side = 0
Network side = 1.
Access: Online.
AC INI-Param: TERMINATIONSIDE"
       ::= {acTrunkISDNCommonEntry 1}



     acTrunkISDNCommonQ931LayerResponseBehavior OBJECT-TYPE
       SYNTAX Integer32 (-2147483647..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Bit-field used to determine several behavior options, which
influence how the Q.931 protocol behaves.
Access: Online.
AC INI-Param: ISDNIBEHAVIOR"
       ::= {acTrunkISDNCommonEntry 2}



     acTrunkISDNCommonIncomingCallsBehavior OBJECT-TYPE
       SYNTAX Unsigned32 (0..4294967295)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This is the bit-field used to determine several behavior options
that influence how the ISDN Stack INCOMING calls behave.
Refer to the Appendix A.8 'ISDN Flexible Behavior' in the
VoPLib Reference Library User's Manual Document #: LTRT-00740.
Access: Online.
AC INI-Param: ISDNINCALLSBEHAVIOR"
       ::= {acTrunkISDNCommonEntry 3}



     acTrunkISDNCommonOutgoingCallsBehavior OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This is the bit-field used to determine several behavior options
that influence how the ISDN Stack OUTGOING calls behave.
Refer to Appendix A.8 in the 'VoPLib Reference Library User's
Manual.
Access: Online.
AC INI-Param: ISDNOUTCALLSBEHAVIOR"
       ::= {acTrunkISDNCommonEntry 4}



     acTrunkISDNCommonGeneralCCBehavior OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This is the bit-field used to determine several general ISDN
behavior options. Refer to the Appendix A.8 'ISDN Flexible
Behavior' in the VoPLib Reference Library User's Manual Document
#: LTRT-00740.
Access: Online.
AC INI-Param: ISDNGENERALCCBEHAVIOR"
       ::= {acTrunkISDNCommonEntry 5}



     acTrunkISDNCommonIuaInterfaceId OBJECT-TYPE
       SYNTAX Integer32 (-1..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines the IUA trunk interface ID value - unsigned integer
- in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF.
AC INI-Param: N/A"
       ::= {acTrunkISDNCommonEntry 6}



     acTrunkISDNCommonDuplicateQ931BuffMode OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Activates / de-activates delivery of raw Q.931 messages. Refer
to the VoPLib documentation ('ISDN Flexible Behavior').
Access: Online.
AC INI-Param: ISDNDUPLICATEQ931BUFFMODE"
       ::= {acTrunkISDNCommonEntry 7}



     acTrunkISDNCommonBRILayer2Mode OBJECT-TYPE
       SYNTAX INTEGER {
                  bRI-L2-MODE-P2P(0)
,
                  bRI-L2-MODE-P2MP(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Indicates point to point or point to Multipoint mode for layer2.
Applicable in BRI trunks only. One of the following values:
Point to point = 0
Point to Multipoint = 1

.
Access: Online.
AC INI-Param: BriLayer2Mode"
       ::= {acTrunkISDNCommonEntry 8}



     acTrunkISDNCommonNSBehaviour2 OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Bit-field used to determine several behavior options, which
influence how the Q.931 protocol behaves.
Refer to the VoPLib documentation (ISDN Flexible Behavior).
Access: Online.
AC INI-Param: ISDNNSBehaviour2"
       ::= {acTrunkISDNCommonEntry 9}



     acTrunkISDNCommonRestartBChannel OBJECT-TYPE
       SYNTAX Integer32 (-1..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sends restart request for a specific B-channel. Only ONE restart
request at a time for a given trunk should be sent, since
the restart state machine is not on per B-channel basis,
but on a per trunk basis. Inputs:
E1: -1, 1 - 31. 
T1: -1, 1 - 24. 
Use -1 to reset and re-initialize all B-channels in the selected
trunk.
Access: Online.
AC INI-Param: N/A"
       ::= {acTrunkISDNCommonEntry 10}



     acTrunkISDNNfas OBJECT IDENTIFIER ::= {acTrunkISDN 2}


     -- ****************************************
     -- acTrunkISDNNfas table declaration
     -- ****************************************
     acTrunkISDNNfasTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkISDNNfasEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acTrunkISDNNfas 1}



     -- ****************************************
     -- acTrunkISDNNfas table entry
     -- ****************************************
     acTrunkISDNNfasEntry OBJECT-TYPE
       SYNTAX AcTrunkISDNNfasEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acTrunkIndex}
       ::= {acTrunkISDNNfasTable 1}



     -- ****************************************
     -- acTrunkISDNNfas TABLE
     -- ****************************************
     AcTrunkISDNNfasEntry ::= SEQUENCE {
       acTrunkISDNNfasDchConfig                        INTEGER,
       acTrunkISDNNfasInterfaceId                      Unsigned32,
       acTrunkISDNNfasGroupNumber                      Unsigned32
     }



     acTrunkISDNNfasDchConfig OBJECT-TYPE
       SYNTAX INTEGER {
                  acDCH-CONFIG-PRIMARY(0)
,
                  acDCH-CONFIG-BACKUP(1)
,
                  acDCH-CONFIG-NFAS(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines D-channel configuration. This setting is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel
backup procedures.

0 = D-channel is Primary
1 = Backup
2 = NFAS.
Access: Online.
AC INI-Param: DCHCONFIG"
       ::= {acTrunkISDNNfasEntry 1}



     acTrunkISDNNfasInterfaceId OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID.
Refer to the VoPLib documentation(ISDN Flexible Behavior).

Default = (unsigned char)-1.

Range = 0 to 255.
Access: Online.
AC INI-Param: ISDNNFASINTERFACEID"
       ::= {acTrunkISDNNfasEntry 2}



     acTrunkISDNNfasGroupNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..12)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Relevant only for T1 ISDN NFAS trunks indicates the group number
of the NFAS group. ;Valid NFAS group numbers are only
1 to 9, 0 indicating that this trunk is not NFAS (in this
case the ISDNNFASInterfaceID and DchConfig parameters are ignored).
Access: Online.
AC INI-Param: NFASGROUPNUMBER"
       ::= {acTrunkISDNNfasEntry 3}



     acTrunkISDNDpnss OBJECT IDENTIFIER ::= {acTrunkISDN 3}


     -- ****************************************
     -- acTrunkISDNDpnss table declaration
     -- ****************************************
     acTrunkISDNDpnssTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkISDNDpnssEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acTrunkISDNDpnss 1}



     -- ****************************************
     -- acTrunkISDNDpnss table entry
     -- ****************************************
     acTrunkISDNDpnssEntry OBJECT-TYPE
       SYNTAX AcTrunkISDNDpnssEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acTrunkIndex}
       ::= {acTrunkISDNDpnssTable 1}



     -- ****************************************
     -- acTrunkISDNDpnss TABLE
     -- ****************************************
     AcTrunkISDNDpnssEntry ::= SEQUENCE {
       acTrunkISDNDpnssBehavior                        Unsigned32,
       acTrunkISDNDpnssNumRealChannels                 Unsigned32,
       acTrunkISDNDpnssNumVirtualChannels              Unsigned32
     }



     acTrunkISDNDpnssBehavior OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The DPNSSBehaviour parameter represents a Bit field parameter.
Each bit represents a specific type of  DPNSS behavior. Currently
only the first 2 bits are in use.

 - DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit
mask 0x0001)

When set to 1: DPNSS stops repeating SABMR after NL and NT1
limits are exceeded.
When set to 0: DPNSS continues repeating SABMR after NL and
NT1 limits are exceeded.
Default is 0 (continue repeating SABMR)

- DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002)

When set to 1: the Startup Procedure is considered as a SUCCESS
only when ALL DLCs succeeded to Reset


When set to 0: the Startup Procedure is considered as a SUCCESS
as soon as 1 DLC succeeded to Reset

Default is 0: (only partial reset is considered as a success).

.
Access: Online.
AC INI-Param: DPNSSBehavior"
       ::= {acTrunkISDNDpnssEntry 1}



     acTrunkISDNDpnssNumRealChannels OBJECT-TYPE
       SYNTAX Unsigned32 (1..30)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of real channels. Default value is 30. Valid
range 1 to 30.
Access: Online.
AC INI-Param: DPNSSNumRealChannels"
       ::= {acTrunkISDNDpnssEntry 2}



     acTrunkISDNDpnssNumVirtualChannels OBJECT-TYPE
       SYNTAX Unsigned32 (0..30)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of virtual channels. Default value is 30. Valid
range 0 to 30.
Access: Online.
AC INI-Param: DPNSSNumVirtualChannels"
       ::= {acTrunkISDNDpnssEntry 3}



     acTrunkCAS OBJECT IDENTIFIER ::= {acTrunkConfig 4}


     -- ****************************************
     -- acTrunkCAS table declaration
     -- ****************************************
     acTrunkCASTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkCASEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acTrunkCAS 1}



     -- ****************************************
     -- acTrunkCAS table entry
     -- ****************************************
     acTrunkCASEntry OBJECT-TYPE
       SYNTAX AcTrunkCASEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acTrunkIndex}
       ::= {acTrunkCASTable 1}



     -- ****************************************
     -- acTrunkCAS TABLE
     -- ****************************************
     AcTrunkCASEntry ::= SEQUENCE {
       acTrunkCASTablesIndex                           Unsigned32,
       acTrunkCASTablePerChannel                       SnmpAdminString
     }



     acTrunkCASTablesIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter determines which CAS protocol file to use on
a specific trunk. The index value corresponds to the number
configured for the parameter CASFileName_X.
Range = not greater than the parameter defining the PSTN CAS
Table Num.
Access: Online.
AC INI-Param: CASTABLEINDEX"
       ::= {acTrunkCASEntry 1}



     acTrunkCASTablePerChannel OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..63))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the Cas protocol table index per channel.
User need to set each channel the table number 0-7, with comma
saperator between channels:
'1,3,1,3,1,3..'.
Access: Instant.
AC INI-Param: CasChannelIndex"
       ::= {acTrunkCASEntry 2}



     acTrunkV5 OBJECT IDENTIFIER ::= {acTrunkConfig 5}


     -- ****************************************
     -- acTrunkV5 table declaration
     -- ****************************************
     acTrunkV5Table OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkV5Entry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acTrunkV5 1}



     -- ****************************************
     -- acTrunkV5 table entry
     -- ****************************************
     acTrunkV5Entry OBJECT-TYPE
       SYNTAX AcTrunkV5Entry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acTrunkIndex}
       ::= {acTrunkV5Table 1}



     -- ****************************************
     -- acTrunkV5 TABLE
     -- ****************************************
     AcTrunkV5Entry ::= SEQUENCE {
       acTrunkV5NumberOfCChannels                      Unsigned32,
       acTrunkV5ProtocolSide                           INTEGER
     }



     acTrunkV5NumberOfCChannels OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Indicates the number of timeslots used as communication channels
in a V5 trunk.
0 - No C-channel, the trunk is voice only.
1 - Timeslot 16 is used for the V5 signaling

.
Access: Online.
AC INI-Param: V5NumberOfCChannels"
       ::= {acTrunkV5Entry 1}



     acTrunkV5ProtocolSide OBJECT-TYPE
       SYNTAX INTEGER {
                  an-Side(0)
,
                  le-Side(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Indicates the V5 side of the V5 protocol served by the trunk..
0 - AN side.
1 - LE side

.
Access: Online.
AC INI-Param: V5ProtocolSide"
       ::= {acTrunkV5Entry 2}



     acTrunkGlobal OBJECT IDENTIFIER ::= {acTrunkConfig 8}


     acTrunkGlobalLifeLineType OBJECT-TYPE
       SYNTAX INTEGER {
                  hW-Only(0)
,
                  hW-And-Link-Detection(1)
,
                  hW-And-Link-And-Network-Detection(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to define the type of trunk lifeline.
Short trunks 1-2, 3-4.
0 = Activate lifeline on power down
1 = Activate lifeline on power down or on detection of LAN
disconnect
2 = Activate lifeline on power down or on detection of LAN
disconnect or loss of ping.
Access: Offline.
AC INI-Param: TrunkLifeLineType"
       ::= {acTrunkGlobal 1}



     acTrunkGlobalBChannelAlarms OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "When set to 1 B-Channels Alarms will be sent.
Access: Offline.
AC INI-Param: BChannelAlarms"
       ::= {acTrunkGlobal 2}



     acISDNConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 2}


     acMiscISDN OBJECT IDENTIFIER ::= {acISDNConfig 1}


     acMiscISDNQ931RelayMode OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  activateLAPDmessaging (1)
,
                  layer3-IS-IUA (3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Activates / de-activates the ISDN level 3 Q.931 Relay Mode.
 
Choose 0 or ActivateLAPDmessaging or Q931_RELAY_TO_HOST or
Layer3_IS_IUA.
Access: Offline.
AC INI-Param: Q931RELAYMODE"
       ::= {acMiscISDN 1}



     acMiscISDNDuplicateQ931BuffMode OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "
Access: Offline.
AC INI-Param: ISDNDUPLICATEQ931BUFFMODE"
       ::= {acMiscISDN 2}



     acDS3Config OBJECT IDENTIFIER ::= {acPSTNConfiguration 3}


     acDS3ConfigFramingMethod OBJECT-TYPE
       SYNTAX INTEGER {
                  dS3-M23(0)
,
                  dS3-C-BIT-PARITY(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Used to select the physical DS3 framing method to be used in
this board. 
0 = M23 framing
1 = C Bit Parity.
Access: Offline.
AC INI-Param: DS3FRAMINGMETHOD"
       ::= {acDS3Config 1}



     acDS3ConfigClockSource OBJECT-TYPE
       SYNTAX INTEGER {
                  acClock-Source-External(0)
,
                  acClock-Source-Local-Board(1)
,
                  acClock-Source-Local-PLL(2)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Selects the physical DS3 framing method to be used in this board.
Applicable only to the TP-2810.

0 = DS3 Clock is recovered from the line
1 = DS3 trunk clock source is provided by the board's internal
clock
2 = Clock is taken from the local PLL which is not synchronized
with any other clock.
Access: Offline.
AC INI-Param: DS3CLOCKSOURCE"
       ::= {acDS3Config 2}



     acDS3ConfigLineBuiltOut OBJECT-TYPE
       SYNTAX INTEGER {
                  acLINE-BUILT-OUT-LEVEL-1(0)
,
                  acLINE-BUILT-OUT-LEVEL-2(1)
,
                  acLINE-BUILT-OUT-LEVEL-3(2)
,
                  acLINE-BUILT-OUT-LEVEL-4(3)
,
                  acLINE-BUILT-OUT-LEVEL-5(4)
,
                  acLINE-BUILT-OUT-LEVEL-6(5)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Used to select the DS3 line build out. Applies only to the TP-2810.
Access: Offline.
AC INI-Param: DS3LINEBUILTOUT"
       ::= {acDS3Config 3}



     acCasConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 4}


     acCasConfigEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter enables or disables the possibility CAS protocol
configuration. At TP6310 When this parameter is enable the
conference will disabled in case it's relevant.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: CASProtocolEnable"
       ::= {acCasConfig 1}



     acCASFile OBJECT IDENTIFIER ::= {acCasConfig 2}


     -- ****************************************
     -- acCASFile table declaration
     -- ****************************************
     acCASFileTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcCASFileEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acCASFile 1}



     -- ****************************************
     -- acCASFile table entry
     -- ****************************************
     acCASFileEntry OBJECT-TYPE
       SYNTAX AcCASFileEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acCASFileIndex}
       ::= {acCASFileTable 1}



     -- ****************************************
     -- acCASFile TABLE
     -- ****************************************
     AcCASFileEntry ::= SEQUENCE {
       acCASFileIndex                                  Unsigned32,
       acCASFileName                                   SnmpAdminString
     }



     acCASFileIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Cas Table Indexd.
AC INI-Param: N/A"
       ::= {acCASFileEntry 1}



     acCASFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This is a pointer to the CAS filename index (0-7). The index
is CASFileName_X. CASFileName_0 through to CASFileName_7 are
the path and names of the CAS protocol configuration files.
AC INI-Param: CASFILENAME"
       ::= {acCASFileEntry 2}



     acSonetSDH OBJECT IDENTIFIER ::= {acPSTNConfiguration 5}


     -- ****************************************
     -- acSonetSDH table declaration
     -- ****************************************
     acSonetSDHTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSonetSDHEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSonetSDH 1}



     -- ****************************************
     -- acSonetSDH table entry
     -- ****************************************
     acSonetSDHEntry OBJECT-TYPE
       SYNTAX AcSonetSDHEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSonetSDHIndex}
       ::= {acSonetSDHTable 1}



     -- ****************************************
     -- acSonetSDH TABLE
     -- ****************************************
     AcSonetSDHEntry ::= SEQUENCE {
       acSonetSDHIndex                                 Unsigned32,
       acSonetSDHFbrGrpMappingType                     INTEGER,
       acSonetSDHFbrGrpKlmNumberingScheme              INTEGER,
       acSonetSDHFbrGrpAPSDirectionMode                INTEGER,
       acSonetSDHFbrGrpAPSRevertMode                   INTEGER,
       acSonetSDHFbrGrpAPSWaitToRestoreTime            Unsigned32
     }



     acSonetSDHIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..1)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Fiber groupe index.
AC INI-Param: N/A"
       ::= {acSonetSDHEntry 1}



     acSonetSDHFbrGrpMappingType OBJECT-TYPE
       SYNTAX INTEGER {
                  asynchronousVT15andDS1(0)
,
                  asynchronousTU12andE1(1)
,
                  sTS1asynchronousDS3(3)
,
                  undefined(15)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects SDH/SONET mapping type (signal label + payload mapping
type) for the PSTN interface.
Generally per Fiber Group.
Single Fiber Group supported in the PSTN interface of TP6310
and TP12610.
Applicable only to the TP-6310 and TP-12610.
Relevant only when acSysTDMBusType = acFRAMERS (2).
0 = Asynchronous VT1.5 and DS1
1 = Asynchronous TU12 and E1
3 = Asynchronous mapping of DS3 in STS1, DS3 channelized to
DS1s
15 = Undefined
Should be in coordination with other parameters as follows:
- sonetMediumType
- acTrunkProtocolType.
Access: Offline.
AC INI-Param: SDHFbrGrp_Mapping_Type"
       ::= {acSonetSDHEntry 2}



     acSonetSDHFbrGrpKlmNumberingScheme OBJECT-TYPE
       SYNTAX INTEGER {
                  numberingScheme-MLK(0)
,
                  numberingScheme-LMK(1)
,
                  numberingScheme-KLM(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides VC/VT numbering scheme for STM-1/OC3 fiber group.
Access: Offline.
AC INI-Param: SDHFbrGrp_KLM_Numbering_Scheme"
       ::= {acSonetSDHEntry 3}



     acSonetSDHFbrGrpAPSDirectionMode OBJECT-TYPE
       SYNTAX INTEGER {
                  unidirectional(0)
,
                  bidirectional(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the Automatic Protection Switch Unidir/Bidir mode for the
Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_DirMode"
       ::= {acSonetSDHEntry 4}



     acSonetSDHFbrGrpAPSRevertMode OBJECT-TYPE
       SYNTAX INTEGER {
                  nonRevertive(0)
,
                  revertive(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the Automatic Protection Switch Revertive mode for the
Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_RevertMode"
       ::= {acSonetSDHEntry 5}



     acSonetSDHFbrGrpAPSWaitToRestoreTime OBJECT-TYPE
       SYNTAX Unsigned32 (5..12)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the APS Wait-to-restore time for the Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_WTR"
       ::= {acSonetSDHEntry 6}



     acPSTNStatus OBJECT IDENTIFIER ::= {acPSTN 2}


     acTrunkStatus OBJECT IDENTIFIER ::= {acPSTNStatus 1}


     -- ****************************************
     -- acTrunkStatus table declaration
     -- ****************************************
     acTrunkStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcTrunkStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acTrunkStatus 1}



     -- ****************************************
     -- acTrunkStatus table entry
     -- ****************************************
     acTrunkStatusEntry OBJECT-TYPE
       SYNTAX AcTrunkStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acTrunkIndex}
       ::= {acTrunkStatusTable 1}



     -- ****************************************
     -- acTrunkStatus TABLE
     -- ****************************************
     AcTrunkStatusEntry ::= SEQUENCE {
       acTrunkStatusLedStatusColor                     INTEGER,
       acTrunkStatusLedStatusState                     INTEGER,
       acTrunkStatusChannels                           OCTET STRING,
       acTrunkStatusV5InterfaceNum                     Integer32,
       acTrunkStatusV5LinkID                           Integer32,
       acTrunkStatusDChannel                           INTEGER,
       acTrunkStatusAlarm                              INTEGER,
       acTrunkStatusDchannelActivity                   INTEGER
     }



     acTrunkStatusLedStatusColor OBJECT-TYPE
       SYNTAX INTEGER {
                  off(0)
,
                  red(1)
,
                  green(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Trunk led status color.
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 1}



     acTrunkStatusLedStatusState OBJECT-TYPE
       SYNTAX INTEGER {
                  steady(0)
,
                  blink(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Trunk led status blinking rate.
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 2}



     acTrunkStatusChannels OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..16))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Reperesents Trunk's Channels-Status. 
Each nibble (half Byte) presents one channel status, as following:
 1 - invalid B-Channel.
 2 - None.
 3 - Open.
 4 - Media.
 5 - SS7.
 6 - HDLC.
 7 - DPNSS. 
 8 - CAS.
 9 - Out Of Service.
 10 - Maintenance.
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 3}



     acTrunkStatusV5InterfaceNum OBJECT-TYPE
       SYNTAX Integer32 (-1..31)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "V5.2 interface containing this trunk.
 -1 means information not available or not relevant.
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 4}



     acTrunkStatusV5LinkID OBJECT-TYPE
       SYNTAX Integer32 (-1..62)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "V5.2 link containing this trunk.
 -1 means information not available or not relevant.
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 5}



     acTrunkStatusDChannel OBJECT-TYPE
       SYNTAX INTEGER {
                  dChannelEstablished(0)
,
                  dChannelNotEstablished(1)
,
                  dChannelNotApplicable(10)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the trunk's D channel status.
 0 - dChannelEstablished
 1 - dChannelNotEstablished
10 - dChannelNotApplicable.
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 6}



     acTrunkStatusAlarm OBJECT-TYPE
       SYNTAX INTEGER {
                  greyDisabled(0)
,
                  greenActive(1)
,
                  redLosLof(2)
,
                  blueAis(3)
,
                  yellowRai(4)
,
                  orangeDChannel(5)
,
                  purpleLowerLayerDown(6)
,
                  darkOrangeNFASAlarm(7)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the trunk's alarm status.
0 - Disabled.
1 - Active  - OK.
2 - LOS/LOF Alarm.
3 - AIS Alarm.
4 - RAI Alram.
5 - D-Channel Alarm.
6 - Lower Layer Down.
7 - NFAS Alarm.
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 7}



     acTrunkStatusDchannelActivity OBJECT-TYPE
       SYNTAX INTEGER {
                  dChannelActive(0)
,
                  dChannelStandby(1)
,
                  dChannelNotApplicable(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines D-channel status. This parameter is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel backup
procedures.
0 = Active channel
1 = Standby channel
2 = Not applicable (this trunk doesn’t have D-channel defined).
AC INI-Param: N/A"
       ::= {acTrunkStatusEntry 8}



     acDigitalLegs OBJECT IDENTIFIER ::= {acPSTNStatus 2}


     -- ****************************************
     -- acDigitalLegs table declaration
     -- ****************************************
     acDigitalLegsTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcDigitalLegsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acDigitalLegs 1}



     -- ****************************************
     -- acDigitalLegs table entry
     -- ****************************************
     acDigitalLegsEntry OBJECT-TYPE
       SYNTAX AcDigitalLegsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acDigitalLegsLegIndex}
       ::= {acDigitalLegsTable 1}



     -- ****************************************
     -- acDigitalLegs TABLE
     -- ****************************************
     AcDigitalLegsEntry ::= SEQUENCE {
       acDigitalLegsLegIndex                           Unsigned32,
       acDigitalLegsCallIndex                          Unsigned32,
       acDigitalLegsTrunk                              Unsigned32,
       acDigitalLegsBchannel                           Unsigned32,
       acDigitalLegsEchoCanceller                      INTEGER,
       acDigitalLegsDTMFDetection                      INTEGER,
       acDigitalLegsVoiceVolume                        Unsigned32,
       acDigitalLegsHighPassFilter                     INTEGER,
       acDigitalLegsInputGain                          INTEGER,
       acDigitalLegsDSPDevice                          Unsigned32,
       acDigitalLegsLegName                            SnmpAdminString
     }



     acDigitalLegsLegIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5000)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Decribes The Digital EndPoint In A Call.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 1}



     acDigitalLegsCallIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5000)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Decribes The Call which The Digital EndPoint Participant In
It.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 2}



     acDigitalLegsTrunk OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Trunk the Leg belong to.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 3}



     acDigitalLegsBchannel OBJECT-TYPE
       SYNTAX Unsigned32 (0..76500)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Bchannel the Leg belong to.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 4}



     acDigitalLegsEchoCanceller OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Enables or Disables the Echo Canceller.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 5}



     acDigitalLegsDTMFDetection OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Enables or Disables the DTMF Detection.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 6}



     acDigitalLegsVoiceVolume OBJECT-TYPE
       SYNTAX Unsigned32 (0..20000)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describs the volume of the voice in dB.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 7}



     acDigitalLegsHighPassFilter OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Enables or Disables theHigh Pass Filter.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 8}



     acDigitalLegsInputGain OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Input Gain on the leg in dB.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 9}



     acDigitalLegsDSPDevice OBJECT-TYPE
       SYNTAX Unsigned32 (0..20000)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "describes the DSP Device the Leg connected to.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 10}



     acDigitalLegsLegName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Leg Name as in the Control Protocol.
AC INI-Param: N/A"
       ::= {acDigitalLegsEntry 11}



     acSDHKLMNumberingScheme OBJECT IDENTIFIER ::= {acPSTNStatus 3}


     -- ****************************************
     -- acSDHKLMNumberingScheme table declaration
     -- ****************************************
     acSDHKLMNumberingSchemeTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSDHKLMNumberingSchemeEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSDHKLMNumberingScheme 1}



     -- ****************************************
     -- acSDHKLMNumberingScheme table entry
     -- ****************************************
     acSDHKLMNumberingSchemeEntry OBJECT-TYPE
       SYNTAX AcSDHKLMNumberingSchemeEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSDHKLMNumberingSchemeTrunkIndex}
       ::= {acSDHKLMNumberingSchemeTable 1}



     -- ****************************************
     -- acSDHKLMNumberingScheme TABLE
     -- ****************************************
     AcSDHKLMNumberingSchemeEntry ::= SEQUENCE {
       acSDHKLMNumberingSchemeTrunkIndex               Unsigned32,
       acSDHKLMNumberingSchemeTUG3OrSTS1               Unsigned32,
       acSDHKLMNumberingSchemeTUG2OrVTG                Unsigned32,
       acSDHKLMNumberingSchemeTU12OrVT15               Unsigned32
     }



     acSDHKLMNumberingSchemeTrunkIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5000)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Trunk Number.
AC INI-Param: N/A"
       ::= {acSDHKLMNumberingSchemeEntry 1}



     acSDHKLMNumberingSchemeTUG3OrSTS1 OBJECT-TYPE
       SYNTAX Unsigned32 (1..3)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSDHKLMNumberingSchemeEntry 2}



     acSDHKLMNumberingSchemeTUG2OrVTG OBJECT-TYPE
       SYNTAX Unsigned32 (1..7)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSDHKLMNumberingSchemeEntry 3}



     acSDHKLMNumberingSchemeTU12OrVT15 OBJECT-TYPE
       SYNTAX Unsigned32 (1..4)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSDHKLMNumberingSchemeEntry 4}



     acFiberGroupStatus OBJECT IDENTIFIER ::= {acPSTNStatus 4}


     acFiberGroupStatusActiveLink OBJECT-TYPE
       SYNTAX Unsigned32 (0..2)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Fiber group active link number.
0 - there is no active fiber group link.
AC INI-Param: N/A"
       ::= {acFiberGroupStatus 1}



     acNFASGroupStatus OBJECT IDENTIFIER ::= {acPSTNStatus 5}


     -- ****************************************
     -- acNFASGroupStatus table declaration
     -- ****************************************
     acNFASGroupStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcNFASGroupStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acNFASGroupStatus 1}



     -- ****************************************
     -- acNFASGroupStatus table entry
     -- ****************************************
     acNFASGroupStatusEntry OBJECT-TYPE
       SYNTAX AcNFASGroupStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acNFASGroupStatusIndex}
       ::= {acNFASGroupStatusTable 1}



     -- ****************************************
     -- acNFASGroupStatus TABLE
     -- ****************************************
     AcNFASGroupStatusEntry ::= SEQUENCE {
       acNFASGroupStatusIndex                          Unsigned32,
       acNFASGroupStatusGroupStatus                    INTEGER,
       acNFASGroupStatusPrimaryDChannel                Integer32,
       acNFASGroupStatusBackupDChannel                 Integer32,
       acNFASGroupStatusAction                         INTEGER,
       acNFASGroupStatusActionResult                   SnmpAdminString,
       acNFASGroupStatusPrimaryDChannelActivity        INTEGER,
       acNFASGroupStatusBackupDChannelActivity         INTEGER
     }



     acNFASGroupStatusIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..12)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "NFAS Group Index.
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 1}



     acNFASGroupStatusGroupStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  notExists(-1)
,
                  inService(0)
,
                  outOfService(1)
,
                  swactInProgress(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the status of the NFAS group.
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 2}



     acNFASGroupStatusPrimaryDChannel OBJECT-TYPE
       SYNTAX Integer32 (-1..83)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The NFAS Group Configured Primary D-Channel.
-1 means no D-channel Configured.
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 3}



     acNFASGroupStatusBackupDChannel OBJECT-TYPE
       SYNTAX Integer32 (-1..83)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The NFAS Group Configured Backup D-Channel.
-1 means no D-channel Configured.
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 4}



     acNFASGroupStatusAction OBJECT-TYPE
       SYNTAX INTEGER {
                  actionDone(0)
,
                  switchOver(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Switches ISDN signaling from active to standby (backup) D-channel
of the NFAS Group.
Access: Instant.
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 5}



     acNFASGroupStatusActionResult OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..40))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Action result. Includes action status (success, failure or notApplicable).
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 6}



     acNFASGroupStatusPrimaryDChannelActivity OBJECT-TYPE
       SYNTAX INTEGER {
                  dChannelActive(0)
,
                  dChannelStandby(1)
,
                  dChannelNotApplicable(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines Primary D-channel status. This parameter is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel
backup procedures.
0 = Active channel
1 = Standby channel
2 = Not applicable (this trunk doesn’t have D-channel defined).
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 7}



     acNFASGroupStatusBackupDChannelActivity OBJECT-TYPE
       SYNTAX INTEGER {
                  dChannelActive(0)
,
                  dChannelStandby(1)
,
                  dChannelNotApplicable(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines Backup D-channel status. This parameter is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel
backup procedures.
0 = Active channel
1 = Standby channel
2 = Not applicable (this trunk doesn’t have D-channel defined).
AC INI-Param: N/A"
       ::= {acNFASGroupStatusEntry 8}





END