path: root/MIBS/ciena/CIENA-WS-PTP-MODEM-MIB

-- This file was automatically generated from ciena-ws-ptp-modem.yang. Do not edit.

CIENA-WS-PTP-MODEM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    cienaWsConfig
        FROM CIENA-WS-MIB
    cwsPtpDiagnosticsEntry, cwsPtpTransmitterEntry
        FROM CIENA-WS-PTP-MIB
    ChannelsNumber, Decimal1Dig, Decimal2Dig, EnabledDisabledEnum, LineSysEnum, ModemChannel, ModemFrequency, OnOffEnum, PtpId, RecoverLinkDispersionType, StringMaxl32, StringSci, TxPowerLvl, WlSpacing
        FROM CIENA-WS-TYPEDEFS-MIB
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI
    TruthValue
        FROM SNMPv2-TC;

cienaWsPtpModemMIB MODULE-IDENTITY
    LAST-UPDATED "201703020000Z"
    ORGANIZATION "Ciena Corporation"
    CONTACT-INFO "Web URL: http://www.ciena.com/
Postal:  7035 Ridge Road
        Hanover, Maryland 21076
        U.S.A.
Phone:   +1 800-921-1144
Fax:     +1 410-694-5750"
    DESCRIPTION "This module defines modem-transceiver PTP data for the Waveserver. It augments the ciena-ws-ptp module. 
The PTP model is the signal carried by the modem transceiver at a line port. Automatically provisioned at system turn-up."
    REVISION "201703020000Z"
    DESCRIPTION "Waveserver Release 1.4

Aligned MIB files to respect YANG read/write status."
    REVISION "201612120000Z"
    DESCRIPTION "Waveserver Rel 1.3 revised.
New container 'fast-rx-recovery' created with new leafs, 

Container 'performance-statistics/pre-fec-signal-degrade',
container 'performance-statistics/pre-fec-signal-fail', and
all sub-nodes have been changed to obsolete.

New 'performance-statistics/alarms' container created.

following leafs have been changed to obsolete:
  'fast-receiver-recovery-state',
  'q-factor average',
  'pre-fec-ber/min',
  'pre-fec-ber/average',
  'post-fec-ber/min',
  'post-fec-ber/max',
  'post-fec-ber/average'

'laser-centering-range' leaf added. 
      
'colourless-channel-power' renamed to 'colourless-rx-channel. 
Added 'power' sub-container for 'colourless-rx-channel. 'power-actual' leaf removed.
New container 'colourless-tx-channel' created with new leafs.

New advanced ptp statistics leafs added to 'performance-statistics' container.

New leaf 'frequency/actual' added."
    REVISION "201606140000Z"
    DESCRIPTION "Waveserver Rel 1.2 revised.
Major restructuring of this YANG module."
    REVISION "201602010000Z"
    DESCRIPTION "Waveserver Rel 1.1 revised.  
Augmented 'ptp-adv-channel-status' container for when the XCVR type is WaveLogic 3 Extreme.  Added new leafs to the augmented container.
Added new pre-FEC related leafs to 'adv-config' augment container.
The tx and rx compensation dispersion related leafs have been re-named to reduce confusion."
    REVISION "201504290000Z"
    DESCRIPTION "Initial version."
    ::= { cienaWsConfig 9 }

cwsPtpAugPtpModemTransmitterTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpAugPtpModemTransmitterEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 3 }

cwsPtpAugPtpModemTransmitterEntry OBJECT-TYPE
    SYNTAX CwsPtpAugPtpModemTransmitterEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpAugPtpModemTransmitterTable."
    AUGMENTS { cwsPtpTransmitterEntry }
    ::= { cwsPtpAugPtpModemTransmitterTable 1 }

CwsPtpAugPtpModemTransmitterEntry ::= SEQUENCE { 
    cwsPtpModemTransmitterLineSystemChannelNumber ModemChannel 
}

cwsPtpModemTransmitterLineSystemChannelNumber OBJECT-TYPE
    SYNTAX ModemChannel
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Line System Channel Number. Channel cannot be modified while Admin State is enabled (except when changing from zero value to another value). Channel cannot be provisioned if System Band Plan field is set to None. Channel cannot be modified in the same operation as Wavelength, Channel, and Wavelength Spacing, only one of those fields may be modified in a single operation. If Channel is modified, Wavelength and Frequency will be automatically updated to valid values. Modification to this field will be validated against the Wavelength Spacing field. Software shall automatically update existing channel number provisioning when user changes Band Plan provisioning. Channel number shall be set to 0 if provisioned wavelength/frequency is not found in the new Band Plan or the new Band Plan equals to None. "
    ::= { cwsPtpAugPtpModemTransmitterEntry 1 }

cwsPtpModemFrequencyTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemFrequencyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 4 }

cwsPtpModemFrequencyEntry OBJECT-TYPE
    SYNTAX CwsPtpModemFrequencyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemFrequencyTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemFrequencyTableSnmpKey }
    ::= { cwsPtpModemFrequencyTable 1 }

CwsPtpModemFrequencyEntry ::= SEQUENCE { 
    cwsPtpModemFrequencyTableSnmpKey Integer32,
    cwsPtpModemFrequencyValue ModemFrequency,
    cwsPtpModemFrequencyMinValue Decimal1Dig,
    cwsPtpModemFrequencyMaxValue Decimal1Dig,
    cwsPtpModemFrequencyActual Decimal1Dig 
}

cwsPtpModemFrequencyTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemFrequency"
    ::= { cwsPtpModemFrequencyEntry 1 }

cwsPtpModemFrequencyValue OBJECT-TYPE
    SYNTAX ModemFrequency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Modem Frequency value (GHz). Frequency cannot be modified while Admin State is enabled (except when changing from zero value to another value). Frequency cannot be modified in the same operation as Wavelength, Channel, and Wavelength Spacing, only one of those fields may be modified in a single operation. If Frequency is modified, Wavelength and Channel will be automatically updated to valid values. Modification to this field will be validated against the Wavelength Spacing field. Attempts to change to a value outside of the range will result in failure."
    ::= { cwsPtpModemFrequencyEntry 2 }

cwsPtpModemFrequencyMinValue OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The Min Frequency value, in GHz."
    ::= { cwsPtpModemFrequencyEntry 3 }

cwsPtpModemFrequencyMaxValue OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The Max Frequency value, in GHz."
    ::= { cwsPtpModemFrequencyEntry 4 }

cwsPtpModemFrequencyActual OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The actual frequency value of the modem ptp. in GHz. It may or may not be equal to the configurable 'frequency/value'"
    ::= { cwsPtpModemFrequencyEntry 5 }

cwsPtpModemPowerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemPowerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 5 }

cwsPtpModemPowerEntry OBJECT-TYPE
    SYNTAX CwsPtpModemPowerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemPowerTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPowerTableSnmpKey }
    ::= { cwsPtpModemPowerTable 1 }

CwsPtpModemPowerEntry ::= SEQUENCE { 
    cwsPtpModemPowerTableSnmpKey Integer32,
    cwsPtpModemPowerValue TxPowerLvl,
    cwsPtpModemPowerMinValue Decimal1Dig,
    cwsPtpModemPowerMaxValue Decimal1Dig 
}

cwsPtpModemPowerTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemPower"
    ::= { cwsPtpModemPowerEntry 1 }

cwsPtpModemPowerValue OBJECT-TYPE
    SYNTAX TxPowerLvl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "The provisioned transmit power in dBm. The range is from -16.0 (-11.0 for EDFA) to -10.0 (4.0 for EDFA). Default is -10.0"
    ::= { cwsPtpModemPowerEntry 2 }

cwsPtpModemPowerMinValue OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The Min Power Level value, in dBm."
    ::= { cwsPtpModemPowerEntry 3 }

cwsPtpModemPowerMaxValue OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The Max Power Level value, in dBm."
    ::= { cwsPtpModemPowerEntry 4 }

cwsPtpModemLineSystemTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemLineSystemEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Modem line System related attributes."
    ::= { cienaWsPtpModemMIB 6 }

cwsPtpModemLineSystemEntry OBJECT-TYPE
    SYNTAX CwsPtpModemLineSystemEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemLineSystemTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemLineSystemTableSnmpKey }
    ::= { cwsPtpModemLineSystemTable 1 }

CwsPtpModemLineSystemEntry ::= SEQUENCE { 
    cwsPtpModemLineSystemTableSnmpKey Integer32,
    cwsPtpModemLineSystemType LineSysEnum,
    cwsPtpModemLineSystemWavelengthSpacing WlSpacing 
}

cwsPtpModemLineSystemTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemLineSystem"
    ::= { cwsPtpModemLineSystemEntry 1 }

cwsPtpModemLineSystemType OBJECT-TYPE
    SYNTAX LineSysEnum
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Line system type. It can be set as coloured or colorless. Default is coloured"
    ::= { cwsPtpModemLineSystemEntry 2 }

cwsPtpModemLineSystemWavelengthSpacing OBJECT-TYPE
    SYNTAX WlSpacing
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Wavelength Spacing cannot be modified while Admin State is enabled. Wavelength Spacing cannot be modified in the same operation as Wavelength, Frequencey, and Channel, only one of those fields may be modified in a single operation. Wavelength Spacing cannot be provisioned when System Band Plan field is set to a value other than None, Wavelength Space field will also be automatically set to Flex Grid. When PTP Wavelength Spacing is changed from FlexGrid to a fixed grid (e.g. 50GHz), or from a fixed grid to another fixed grid value, if existing Wavelength and Frequency is not valid in the selected grid, their values will be set to zero. When PTP Wavelength Spacing is changed from a fixed grid (e.g. 50GHz) to FlexGrid, existing Wavelength, Frequency and Line System Channel Number remain unchanged."
    ::= { cwsPtpModemLineSystemEntry 3 }

cwsPtpModemCmdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemCmdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 7 }

cwsPtpModemCmdEntry OBJECT-TYPE
    SYNTAX CwsPtpModemCmdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemCmdTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemCmdTableSnmpKey }
    ::= { cwsPtpModemCmdTable 1 }

CwsPtpModemCmdEntry ::= SEQUENCE { 
    cwsPtpModemCmdTableSnmpKey Integer32,
    cwsPtpModemCmdSlot Unsigned32,
    cwsPtpModemCmdPortIn Unsigned32,
    cwsPtpModemCmdPortOut Unsigned32 
}

cwsPtpModemCmdTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemCmd"
    ::= { cwsPtpModemCmdEntry 1 }

cwsPtpModemCmdSlot OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "CMD Slot. Cannot be modified currently."
    ::= { cwsPtpModemCmdEntry 2 }

cwsPtpModemCmdPortIn OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "CMD Port In. Cannot be modified."
    ::= { cwsPtpModemCmdEntry 3 }

cwsPtpModemCmdPortOut OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "CMD Port Out. Cannot be modified."
    ::= { cwsPtpModemCmdEntry 4 }

cwsPtpModemModemTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemModemEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 8 }

cwsPtpModemModemEntry OBJECT-TYPE
    SYNTAX CwsPtpModemModemEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemModemTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemTableSnmpKey }
    ::= { cwsPtpModemModemTable 1 }

CwsPtpModemModemEntry ::= SEQUENCE { 
    cwsPtpModemModemTableSnmpKey Integer32,
    cwsPtpModemModemChannelContentionDetectionAvoidance OnOffEnum,
    cwsPtpModemModemPerformanceOptimizationMode INTEGER,
    cwsPtpModemModemCarrierCenteringMode INTEGER,
    cwsPtpModemModemInterleaverMode INTEGER,
    cwsPtpModemModemRotation OnOffEnum,
    cwsPtpModemModemSpectralOccupancyMode INTEGER,
    cwsPtpModemModemTxPowerReductionState EnabledDisabledEnum,
    cwsPtpModemModemTxReductionMode INTEGER,
    cwsPtpModemModemTxTuningMode INTEGER,
    cwsPtpModemModemDifferentialEncoding INTEGER,
    cwsPtpModemModemTxCompensationDispersionMode INTEGER,
    cwsPtpModemModemTxCompensationDispersionValue Decimal1Dig,
    cwsPtpModemModemFastReceiverRecoveryState EnabledDisabledEnum,
    cwsPtpModemModemLaserCenteringRange Decimal1Dig 
}

cwsPtpModemModemTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemModem"
    ::= { cwsPtpModemModemEntry 1 }

cwsPtpModemModemChannelContentionDetectionAvoidance OBJECT-TYPE
    SYNTAX OnOffEnum
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Turns the channel contention detection and avoidance feature on or off. This feature is used to detect the situation where the modem port turn on a wavelength (or frequency in Gridless mode) that is in use by an existing L0 connection on a colorless network. This feature will be triggered by new wavelength/frequency provisioning and will automatically detects if the provisioned wavelength/frequency is already used. If the provisioned wavelength/frequency is already used, it declares channel contention, and then it will hold the Line port TX in a low power state (<-35 dBm) and will raise a Channel Contention alarm. This feature will also provide a mechanism to allow user to manually release the Line port TX from being held in a low power state while the channel collision declared."
    ::= { cwsPtpModemModemEntry 2 }

cwsPtpModemModemPerformanceOptimizationMode OBJECT-TYPE
    SYNTAX INTEGER { reach(0), latency(1), fasttracking(2), improvedtracking(3), mode5(4), mode6(5), mode7(6), mode8(7), mode9(8), mode10(9), mode11(10), mode12(11), mode13(12), mode14(13) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Performance Optimization. It optimizes for either reach or latency. Default is reach."
    ::= { cwsPtpModemModemEntry 3 }

cwsPtpModemModemCarrierCenteringMode OBJECT-TYPE
    SYNTAX INTEGER { mode1(0), mode2(1), mode3(3) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This parameter is used to configure which Carrier centering mode to apply to the OTM signal. Default is mode-2."
    ::= { cwsPtpModemModemEntry 4 }

cwsPtpModemModemInterleaverMode OBJECT-TYPE
    SYNTAX INTEGER { none(0), standard(1), enhanced(2), auto(3) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "The Interleaver Mode. It can be set as standard or enhanced. Default is enhanced."
    ::= { cwsPtpModemModemEntry 5 }

cwsPtpModemModemRotation OBJECT-TYPE
    SYNTAX OnOffEnum
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "To enable (on) or disable (off) Jones's rotation. Default is off"
    ::= { cwsPtpModemModemEntry 6 }

cwsPtpModemModemSpectralOccupancyMode OBJECT-TYPE
    SYNTAX INTEGER { narrow(0), wide(1) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Spectral Occupancy Mode. This is the optical channel spectral Occupancy parameter which supports two different kinds of waveforms: narrow and wide. Default is narrow. Narrow: Root-Raised Cosine with Alpha of 0.14. Wide: Root-Raised Cosine 0.14 convolved with Gaussian 25GHz full-width half maximum (FWHM)."
    ::= { cwsPtpModemModemEntry 7 }

cwsPtpModemModemTxPowerReductionState OBJECT-TYPE
    SYNTAX EnabledDisabledEnum
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This parameter is used to enable TX blanking functionality. Default is Off"
    ::= { cwsPtpModemModemEntry 8 }

cwsPtpModemModemTxReductionMode OBJECT-TYPE
    SYNTAX INTEGER { positive(0), negative(1), auto(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Transmit XPM reduction. It can be set as Positive, Negative or Auto. This should always be enabled (Positive). Disabling this should be done for only interworking purposes."
    ::= { cwsPtpModemModemEntry 9 }

cwsPtpModemModemTxTuningMode OBJECT-TYPE
    SYNTAX INTEGER { performanceoptimized(0), accelerated(1) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This is the Tuning Mode, which can be set as performance-optimized (normal) or accelerated tuning mode. Default is performance-optimized"
    ::= { cwsPtpModemModemEntry 10 }

cwsPtpModemModemDifferentialEncoding OBJECT-TYPE
    SYNTAX INTEGER { none(0), hard(1), soft(2), xd(3) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This parameter is used to configure which differential encoding mode to apply to the OTM signal. It can be set as None, Hard, Soft, Xd. Default is none."
    ::= { cwsPtpModemModemEntry 11 }

cwsPtpModemModemTxCompensationDispersionMode OBJECT-TYPE
    SYNTAX INTEGER { manual(0), automatic(1), custom1(2), off(3) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Tx Compensation Dispersion Mode. Default is Off."
    ::= { cwsPtpModemModemEntry 12 }

cwsPtpModemModemTxCompensationDispersionValue OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Tx compensation dispersion value range from -40000 ps/nm to 85000 ps/nm. Default is 0"
    ::= { cwsPtpModemModemEntry 13 }

cwsPtpModemModemFastReceiverRecoveryState OBJECT-TYPE
    SYNTAX EnabledDisabledEnum
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "Whether fast receiver recovery state is enabled or disabled. Allows modem to attempt to reacquire a signal very soon after a loss of signal by using predefined tuning values.
This leaf is now obsolete in WS 1.3"
    ::= { cwsPtpModemModemEntry 14 }

cwsPtpModemModemLaserCenteringRange OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This parameter is used to configure the laser centering range."
    ::= { cwsPtpModemModemEntry 15 }

cwsPtpModemPerformanceStatisticsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemPerformanceStatisticsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 9 }

cwsPtpModemPerformanceStatisticsEntry OBJECT-TYPE
    SYNTAX CwsPtpModemPerformanceStatisticsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemPerformanceStatisticsTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPerformanceStatisticsTableSnmpKey }
    ::= { cwsPtpModemPerformanceStatisticsTable 1 }

CwsPtpModemPerformanceStatisticsEntry ::= SEQUENCE { 
    cwsPtpModemPerformanceStatisticsTableSnmpKey Integer32,
    cwsPtpModemPerformanceStatisticsSecondsSinceLastClear Unsigned32,
    cwsPtpModemPerformanceStatisticsFecUncorrectedBlockCount Unsigned32,
    cwsPtpModemPerformanceStatisticsHighCorrectionCountSeconds Unsigned32 
}

cwsPtpModemPerformanceStatisticsTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemPerformanceStatistics"
    ::= { cwsPtpModemPerformanceStatisticsEntry 1 }

cwsPtpModemPerformanceStatisticsSecondsSinceLastClear OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Number of seconds since last statistics clear."
    ::= { cwsPtpModemPerformanceStatisticsEntry 2 }

cwsPtpModemPerformanceStatisticsFecUncorrectedBlockCount OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Uncorrected FEC block count."
    ::= { cwsPtpModemPerformanceStatisticsEntry 3 }

cwsPtpModemPerformanceStatisticsHighCorrectionCountSeconds OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "High correction count seconds."
    ::= { cwsPtpModemPerformanceStatisticsEntry 4 }

cwsPtpModemPreFecBerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemPreFecBerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 10 }

cwsPtpModemPreFecBerEntry OBJECT-TYPE
    SYNTAX CwsPtpModemPreFecBerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemPreFecBerTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPreFecBerTableSnmpKey }
    ::= { cwsPtpModemPreFecBerTable 1 }

CwsPtpModemPreFecBerEntry ::= SEQUENCE { 
    cwsPtpModemPreFecBerTableSnmpKey Integer32,
    cwsPtpModemPreFecBerActual StringSci,
    cwsPtpModemPreFecBerMax StringSci,
    cwsPtpModemPreFecBerMin StringSci,
    cwsPtpModemPreFecBerAverage StringSci 
}

cwsPtpModemPreFecBerTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemPreFecBer"
    ::= { cwsPtpModemPreFecBerEntry 1 }

cwsPtpModemPreFecBerActual OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Pre-FEC BER Actual Value, in scientific notation format.  If the Port is down or invalid, this field will not be present."
    ::= { cwsPtpModemPreFecBerEntry 2 }

cwsPtpModemPreFecBerMax OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Max Pre-FEC BER value, in scientific notation format.  If the Port is down or invalid, this field will not be present."
    ::= { cwsPtpModemPreFecBerEntry 3 }

cwsPtpModemPreFecBerMin OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "Min Pre-FEC BER value, in scientific notation format.  If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
    ::= { cwsPtpModemPreFecBerEntry 4 }

cwsPtpModemPreFecBerAverage OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "Average Pre-FEC BER value, in scientific notation format.  If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
    ::= { cwsPtpModemPreFecBerEntry 5 }

cwsPtpModemPostFecBerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemPostFecBerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 11 }

cwsPtpModemPostFecBerEntry OBJECT-TYPE
    SYNTAX CwsPtpModemPostFecBerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemPostFecBerTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPostFecBerTableSnmpKey }
    ::= { cwsPtpModemPostFecBerTable 1 }

CwsPtpModemPostFecBerEntry ::= SEQUENCE { 
    cwsPtpModemPostFecBerTableSnmpKey Integer32,
    cwsPtpModemPostFecBerActual StringSci,
    cwsPtpModemPostFecBerMax StringSci,
    cwsPtpModemPostFecBerMin StringSci,
    cwsPtpModemPostFecBerAverage StringSci 
}

cwsPtpModemPostFecBerTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemPostFecBer"
    ::= { cwsPtpModemPostFecBerEntry 1 }

cwsPtpModemPostFecBerActual OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Post-FEC BER Actual value, in scientific notation format.  If the Port is down or invalid, this field will not be present."
    ::= { cwsPtpModemPostFecBerEntry 2 }

cwsPtpModemPostFecBerMax OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "Max Post-FEC BER value, in scientific notation format.  If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
    ::= { cwsPtpModemPostFecBerEntry 3 }

cwsPtpModemPostFecBerMin OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "Min Post-FEC BER value, in scientific notation format.  If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
    ::= { cwsPtpModemPostFecBerEntry 4 }

cwsPtpModemPostFecBerAverage OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "Average Post-FEC BER value, in scientific notation format.  If the Port is down or invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
    ::= { cwsPtpModemPostFecBerEntry 5 }

cwsPtpModemQFactorTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemQFactorEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 12 }

cwsPtpModemQFactorEntry OBJECT-TYPE
    SYNTAX CwsPtpModemQFactorEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemQFactorTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemQFactorTableSnmpKey }
    ::= { cwsPtpModemQFactorTable 1 }

CwsPtpModemQFactorEntry ::= SEQUENCE { 
    cwsPtpModemQFactorTableSnmpKey Integer32,
    cwsPtpModemQFactorActual Decimal2Dig,
    cwsPtpModemQFactorMax Decimal2Dig,
    cwsPtpModemQFactorMin Decimal2Dig,
    cwsPtpModemQFactorAverage Decimal2Dig 
}

cwsPtpModemQFactorTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemQFactor"
    ::= { cwsPtpModemQFactorEntry 1 }

cwsPtpModemQFactorActual OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Q-factor actual value. If this value is invalid, this field will not be present."
    ::= { cwsPtpModemQFactorEntry 2 }

cwsPtpModemQFactorMax OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Max Q-factor value.  If this value is invalid, this field will not be present."
    ::= { cwsPtpModemQFactorEntry 3 }

cwsPtpModemQFactorMin OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Min Q-factor value.  If this value is invalid, this field will not be present."
    ::= { cwsPtpModemQFactorEntry 4 }

cwsPtpModemQFactorAverage OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "Average Q-factor value.  If this value is invalid, this field will not be present.
This attribute is obsolete in WS 1.3"
    ::= { cwsPtpModemQFactorEntry 5 }

cwsPtpModemFecFrameErrorCountTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemFecFrameErrorCountEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 13 }

cwsPtpModemFecFrameErrorCountEntry OBJECT-TYPE
    SYNTAX CwsPtpModemFecFrameErrorCountEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemFecFrameErrorCountTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemFecFrameErrorCountTableSnmpKey }
    ::= { cwsPtpModemFecFrameErrorCountTable 1 }

CwsPtpModemFecFrameErrorCountEntry ::= SEQUENCE { 
    cwsPtpModemFecFrameErrorCountTableSnmpKey Integer32,
    cwsPtpModemFecFrameErrorCountValue Unsigned32,
    cwsPtpModemFecFrameErrorCountSeconds Unsigned32 
}

cwsPtpModemFecFrameErrorCountTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemFecFrameErrorCount"
    ::= { cwsPtpModemFecFrameErrorCountEntry 1 }

cwsPtpModemFecFrameErrorCountValue OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FEC Frame Error Count Value."
    ::= { cwsPtpModemFecFrameErrorCountEntry 2 }

cwsPtpModemFecFrameErrorCountSeconds OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FEC Frame Error Count Seconds."
    ::= { cwsPtpModemFecFrameErrorCountEntry 3 }

cwsPtpModemModemprefecsignalfailalarmTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignalfailalarmEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 14 }

cwsPtpModemModemprefecsignalfailalarmEntry OBJECT-TYPE
    SYNTAX CwsPtpModemModemprefecsignalfailalarmEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemModemprefecsignalfailalarmTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignalfailalarmTableSnmpKey }
    ::= { cwsPtpModemModemprefecsignalfailalarmTable 1 }

CwsPtpModemModemprefecsignalfailalarmEntry ::= SEQUENCE { 
    cwsPtpModemModemprefecsignalfailalarmTableSnmpKey Integer32,
    cwsPtpModemModemprefecsignalfailalarmActive TruthValue 
}

cwsPtpModemModemprefecsignalfailalarmTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemModemprefecsignalfailalarm"
    ::= { cwsPtpModemModemprefecsignalfailalarmEntry 1 }

cwsPtpModemModemprefecsignalfailalarmActive OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "If OTU4 Pre-FEC Signal Fail alarm has been raised."
    ::= { cwsPtpModemModemprefecsignalfailalarmEntry 2 }

cwsPtpModemModemprefecsignalfailalarmthresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignalfailalarmthresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 15 }

cwsPtpModemModemprefecsignalfailalarmthresholdEntry OBJECT-TYPE
    SYNTAX CwsPtpModemModemprefecsignalfailalarmthresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemModemprefecsignalfailalarmthresholdTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignalfailalarmthresholdTableSnmpKey }
    ::= { cwsPtpModemModemprefecsignalfailalarmthresholdTable 1 }

CwsPtpModemModemprefecsignalfailalarmthresholdEntry ::= SEQUENCE { 
    cwsPtpModemModemprefecsignalfailalarmthresholdTableSnmpKey Integer32,
    cwsPtpModemModemprefecsignalfailalarmthresholdDbq Decimal2Dig 
}

cwsPtpModemModemprefecsignalfailalarmthresholdTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemModemprefecsignalfailalarmthreshold"
    ::= { cwsPtpModemModemprefecsignalfailalarmthresholdEntry 1 }

cwsPtpModemModemprefecsignalfailalarmthresholdDbq OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Pre-FEC Signal Fail Threshold, in dBQ."
    ::= { cwsPtpModemModemprefecsignalfailalarmthresholdEntry 2 }

cwsPtpModemModemprefecsignaldegradealarmTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignaldegradealarmEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 16 }

cwsPtpModemModemprefecsignaldegradealarmEntry OBJECT-TYPE
    SYNTAX CwsPtpModemModemprefecsignaldegradealarmEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemModemprefecsignaldegradealarmTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignaldegradealarmTableSnmpKey }
    ::= { cwsPtpModemModemprefecsignaldegradealarmTable 1 }

CwsPtpModemModemprefecsignaldegradealarmEntry ::= SEQUENCE { 
    cwsPtpModemModemprefecsignaldegradealarmTableSnmpKey Integer32,
    cwsPtpModemModemprefecsignaldegradealarmActive TruthValue 
}

cwsPtpModemModemprefecsignaldegradealarmTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemModemprefecsignaldegradealarm"
    ::= { cwsPtpModemModemprefecsignaldegradealarmEntry 1 }

cwsPtpModemModemprefecsignaldegradealarmActive OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "If OTU4 Pre-FEC Signal Degrade alarm has been raised."
    ::= { cwsPtpModemModemprefecsignaldegradealarmEntry 2 }

cwsPtpModemModemprefecsignaldegradealarmthresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignaldegradealarmthresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 17 }

cwsPtpModemModemprefecsignaldegradealarmthresholdEntry OBJECT-TYPE
    SYNTAX CwsPtpModemModemprefecsignaldegradealarmthresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemModemprefecsignaldegradealarmthresholdTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignaldegradealarmthresholdTableSnmpKey }
    ::= { cwsPtpModemModemprefecsignaldegradealarmthresholdTable 1 }

CwsPtpModemModemprefecsignaldegradealarmthresholdEntry ::= SEQUENCE { 
    cwsPtpModemModemprefecsignaldegradealarmthresholdTableSnmpKey Integer32,
    cwsPtpModemModemprefecsignaldegradealarmthresholdDbq Decimal2Dig 
}

cwsPtpModemModemprefecsignaldegradealarmthresholdTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemModemprefecsignaldegradealarmthreshold"
    ::= { cwsPtpModemModemprefecsignaldegradealarmthresholdEntry 1 }

cwsPtpModemModemprefecsignaldegradealarmthresholdDbq OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Pre-FEC Signal Degrade Threshold, in dBQ."
    ::= { cwsPtpModemModemprefecsignaldegradealarmthresholdEntry 2 }

cwsPtpModemPreFecSignalFailTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemPreFecSignalFailEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 18 }

cwsPtpModemPreFecSignalFailEntry OBJECT-TYPE
    SYNTAX CwsPtpModemPreFecSignalFailEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "Entry for cwsPtpModemPreFecSignalFailTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPreFecSignalFailTableSnmpKey }
    ::= { cwsPtpModemPreFecSignalFailTable 1 }

CwsPtpModemPreFecSignalFailEntry ::= SEQUENCE { 
    cwsPtpModemPreFecSignalFailTableSnmpKey Integer32,
    cwsPtpModemPreFecSignalFailFailStatus TruthValue 
}

cwsPtpModemPreFecSignalFailTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemPreFecSignalFail"
    ::= { cwsPtpModemPreFecSignalFailEntry 1 }

cwsPtpModemPreFecSignalFailFailStatus OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "If OTU4 Pre-FEC Signal Fail has been raised."
    ::= { cwsPtpModemPreFecSignalFailEntry 2 }

cwsPtpModemModemprefecsignalfailthresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignalfailthresholdEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 19 }

cwsPtpModemModemprefecsignalfailthresholdEntry OBJECT-TYPE
    SYNTAX CwsPtpModemModemprefecsignalfailthresholdEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "Entry for cwsPtpModemModemprefecsignalfailthresholdTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignalfailthresholdTableSnmpKey }
    ::= { cwsPtpModemModemprefecsignalfailthresholdTable 1 }

CwsPtpModemModemprefecsignalfailthresholdEntry ::= SEQUENCE { 
    cwsPtpModemModemprefecsignalfailthresholdTableSnmpKey Integer32,
    cwsPtpModemModemprefecsignalfailthresholdDbq Decimal2Dig,
    cwsPtpModemModemprefecsignalfailthresholdBer StringSci 
}

cwsPtpModemModemprefecsignalfailthresholdTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemModemprefecsignalfailthreshold"
    ::= { cwsPtpModemModemprefecsignalfailthresholdEntry 1 }

cwsPtpModemModemprefecsignalfailthresholdDbq OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-write
    STATUS obsolete
    DESCRIPTION "Pre-FEC Signal Fail Threshold, in dBQ."
    ::= { cwsPtpModemModemprefecsignalfailthresholdEntry 2 }

cwsPtpModemModemprefecsignalfailthresholdBer OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-write
    STATUS obsolete
    DESCRIPTION "Pre-FEC Signal Fail Threshold BER, in scientific notation format.  If the Port is down or invalid, this field will not be present."
    ::= { cwsPtpModemModemprefecsignalfailthresholdEntry 3 }

cwsPtpModemPreFecSignalDegradeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemPreFecSignalDegradeEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 20 }

cwsPtpModemPreFecSignalDegradeEntry OBJECT-TYPE
    SYNTAX CwsPtpModemPreFecSignalDegradeEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "Entry for cwsPtpModemPreFecSignalDegradeTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemPreFecSignalDegradeTableSnmpKey }
    ::= { cwsPtpModemPreFecSignalDegradeTable 1 }

CwsPtpModemPreFecSignalDegradeEntry ::= SEQUENCE { 
    cwsPtpModemPreFecSignalDegradeTableSnmpKey Integer32,
    cwsPtpModemPreFecSignalDegradeDegradeStatus TruthValue 
}

cwsPtpModemPreFecSignalDegradeTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemPreFecSignalDegrade"
    ::= { cwsPtpModemPreFecSignalDegradeEntry 1 }

cwsPtpModemPreFecSignalDegradeDegradeStatus OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS obsolete
    DESCRIPTION "If OTU4 Pre-FEC Signal Degrade has been raised."
    ::= { cwsPtpModemPreFecSignalDegradeEntry 2 }

cwsPtpModemModemprefecsignaldegradethresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemModemprefecsignaldegradethresholdEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 21 }

cwsPtpModemModemprefecsignaldegradethresholdEntry OBJECT-TYPE
    SYNTAX CwsPtpModemModemprefecsignaldegradethresholdEntry
    MAX-ACCESS not-accessible
    STATUS obsolete
    DESCRIPTION "Entry for cwsPtpModemModemprefecsignaldegradethresholdTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemModemprefecsignaldegradethresholdTableSnmpKey }
    ::= { cwsPtpModemModemprefecsignaldegradethresholdTable 1 }

CwsPtpModemModemprefecsignaldegradethresholdEntry ::= SEQUENCE { 
    cwsPtpModemModemprefecsignaldegradethresholdTableSnmpKey Integer32,
    cwsPtpModemModemprefecsignaldegradethresholdDbq Decimal2Dig,
    cwsPtpModemModemprefecsignaldegradethresholdBer StringSci 
}

cwsPtpModemModemprefecsignaldegradethresholdTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemModemprefecsignaldegradethreshold"
    ::= { cwsPtpModemModemprefecsignaldegradethresholdEntry 1 }

cwsPtpModemModemprefecsignaldegradethresholdDbq OBJECT-TYPE
    SYNTAX Decimal2Dig
    MAX-ACCESS read-write
    STATUS obsolete
    DESCRIPTION "Pre-FEC Signal Degrade Threshold, in dBQ."
    ::= { cwsPtpModemModemprefecsignaldegradethresholdEntry 2 }

cwsPtpModemModemprefecsignaldegradethresholdBer OBJECT-TYPE
    SYNTAX StringSci
    MAX-ACCESS read-write
    STATUS obsolete
    DESCRIPTION "Pre-FEC Signal Degrade Threshold BER, in scientific notation format.  If the Port is down or invalid, this field will not be present."
    ::= { cwsPtpModemModemprefecsignaldegradethresholdEntry 3 }

cwsPtpModemRxlinkdispersionTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemRxlinkdispersionEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 22 }

cwsPtpModemRxlinkdispersionEntry OBJECT-TYPE
    SYNTAX CwsPtpModemRxlinkdispersionEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemRxlinkdispersionTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemRxlinkdispersionTableSnmpKey }
    ::= { cwsPtpModemRxlinkdispersionTable 1 }

CwsPtpModemRxlinkdispersionEntry ::= SEQUENCE { 
    cwsPtpModemRxlinkdispersionTableSnmpKey Integer32,
    cwsPtpModemRxlinkdispersionTotal Integer32,
    cwsPtpModemRxlinkdispersionCompensation Integer32 
}

cwsPtpModemRxlinkdispersionTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemRxlinkdispersion"
    ::= { cwsPtpModemRxlinkdispersionEntry 1 }

cwsPtpModemRxlinkdispersionTotal OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Total Rx Link Dispersion, unit is ps/nm."
    ::= { cwsPtpModemRxlinkdispersionEntry 2 }

cwsPtpModemRxlinkdispersionCompensation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Rx Compensation Dispersion, unit is ps/nm."
    ::= { cwsPtpModemRxlinkdispersionEntry 3 }

cwsPtpModemTxlinkdispersionTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemTxlinkdispersionEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 23 }

cwsPtpModemTxlinkdispersionEntry OBJECT-TYPE
    SYNTAX CwsPtpModemTxlinkdispersionEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemTxlinkdispersionTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemTxlinkdispersionTableSnmpKey }
    ::= { cwsPtpModemTxlinkdispersionTable 1 }

CwsPtpModemTxlinkdispersionEntry ::= SEQUENCE { 
    cwsPtpModemTxlinkdispersionTableSnmpKey Integer32,
    cwsPtpModemTxlinkdispersionTotal Integer32,
    cwsPtpModemTxlinkdispersionActual Integer32 
}

cwsPtpModemTxlinkdispersionTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemTxlinkdispersion"
    ::= { cwsPtpModemTxlinkdispersionEntry 1 }

cwsPtpModemTxlinkdispersionTotal OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Total Tx Link Dispersion, unit is ps/nm."
    ::= { cwsPtpModemTxlinkdispersionEntry 2 }

cwsPtpModemTxlinkdispersionActual OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Tx Actual Link Dispersion, unit is ps/nm."
    ::= { cwsPtpModemTxlinkdispersionEntry 3 }

cwsPtpModemDifferentialGroupDelayTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemDifferentialGroupDelayEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 24 }

cwsPtpModemDifferentialGroupDelayEntry OBJECT-TYPE
    SYNTAX CwsPtpModemDifferentialGroupDelayEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemDifferentialGroupDelayTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemDifferentialGroupDelayTableSnmpKey }
    ::= { cwsPtpModemDifferentialGroupDelayTable 1 }

CwsPtpModemDifferentialGroupDelayEntry ::= SEQUENCE { 
    cwsPtpModemDifferentialGroupDelayTableSnmpKey Integer32,
    cwsPtpModemDifferentialGroupDelayMeanSupported Integer32,
    cwsPtpModemDifferentialGroupDelayEstimatedInstance Integer32 
}

cwsPtpModemDifferentialGroupDelayTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemDifferentialGroupDelay"
    ::= { cwsPtpModemDifferentialGroupDelayEntry 1 }

cwsPtpModemDifferentialGroupDelayMeanSupported OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mean Supported Differential Group Delay, unit is ps."
    ::= { cwsPtpModemDifferentialGroupDelayEntry 2 }

cwsPtpModemDifferentialGroupDelayEstimatedInstance OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Estimated Instance of Differential Group Delay, unit is ps."
    ::= { cwsPtpModemDifferentialGroupDelayEntry 3 }

cwsPtpModemFastRxRecoveryTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemFastRxRecoveryEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Fast receiver recovery related leafs and attributes."
    ::= { cienaWsPtpModemMIB 25 }

cwsPtpModemFastRxRecoveryEntry OBJECT-TYPE
    SYNTAX CwsPtpModemFastRxRecoveryEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemFastRxRecoveryTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemFastRxRecoveryTableSnmpKey }
    ::= { cwsPtpModemFastRxRecoveryTable 1 }

CwsPtpModemFastRxRecoveryEntry ::= SEQUENCE { 
    cwsPtpModemFastRxRecoveryTableSnmpKey Integer32,
    cwsPtpModemFastRxRecoveryState EnabledDisabledEnum,
    cwsPtpModemFastRxRecoveryNetworkConfiguration INTEGER,
    cwsPtpModemFastRxRecoveryPath1Dispersion RecoverLinkDispersionType,
    cwsPtpModemFastRxRecoveryPath2Dispersion RecoverLinkDispersionType 
}

cwsPtpModemFastRxRecoveryTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemFastRxRecovery"
    ::= { cwsPtpModemFastRxRecoveryEntry 1 }

cwsPtpModemFastRxRecoveryState OBJECT-TYPE
    SYNTAX EnabledDisabledEnum
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Whether fast receiver recovery state is enabled or disabled. Allows modem to attempt to reacquire a signal very soon after a loss of signal by using predefined tuning values."
    ::= { cwsPtpModemFastRxRecoveryEntry 2 }

cwsPtpModemFastRxRecoveryNetworkConfiguration OBJECT-TYPE
    SYNTAX INTEGER { matched(0), diverse(1) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Fast receiver recovery network configuration value."
    ::= { cwsPtpModemFastRxRecoveryEntry 3 }

cwsPtpModemFastRxRecoveryPath1Dispersion OBJECT-TYPE
    SYNTAX RecoverLinkDispersionType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Fast receiver recovery network path 1 dispersion value. The value must be between -80000 and +80000."
    ::= { cwsPtpModemFastRxRecoveryEntry 4 }

cwsPtpModemFastRxRecoveryPath2Dispersion OBJECT-TYPE
    SYNTAX RecoverLinkDispersionType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Fast receiver recovery network path 2 dispersion value. The value must be between -80000 and +80000."
    ::= { cwsPtpModemFastRxRecoveryEntry 5 }

cwsPtpModemColourlessRxChannelPowerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemColourlessRxChannelPowerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Colourless Rx Channel optical power related attributes."
    ::= { cienaWsPtpModemMIB 26 }

cwsPtpModemColourlessRxChannelPowerEntry OBJECT-TYPE
    SYNTAX CwsPtpModemColourlessRxChannelPowerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemColourlessRxChannelPowerTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpChannelChannelNumber, cwsPtpModemColourlessRxChannelPowerTableSnmpKey }
    ::= { cwsPtpModemColourlessRxChannelPowerTable 1 }

CwsPtpModemColourlessRxChannelPowerEntry ::= SEQUENCE { 
    cwsPtpModemColourlessRxChannelPowerTableSnmpKey Integer32,
    cwsXcvrColourlessRxChannelPowerActual Decimal1Dig,
    cwsXcvrColourlessRxChannelPowerMaximum Decimal1Dig,
    cwsXcvrColourlessRxChannelPowerMinimum Decimal1Dig,
    cwsXcvrColourlessRxChannelPowerMaximumRecordedTime StringMaxl32,
    cwsXcvrColourlessRxChannelPowerMinimumRecordedTime StringMaxl32 
}

cwsPtpModemColourlessRxChannelPowerTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemColourlessRxChannelPower"
    ::= { cwsPtpModemColourlessRxChannelPowerEntry 1 }

cwsXcvrColourlessRxChannelPowerActual OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Actual Tx or Rx optical power in dBm."
    ::= { cwsPtpModemColourlessRxChannelPowerEntry 2 }

cwsXcvrColourlessRxChannelPowerMaximum OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Maximum Tx or Rx optical power in dBm."
    ::= { cwsPtpModemColourlessRxChannelPowerEntry 3 }

cwsXcvrColourlessRxChannelPowerMinimum OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Minimum Tx or Rx optical power in dBm."
    ::= { cwsPtpModemColourlessRxChannelPowerEntry 4 }

cwsXcvrColourlessRxChannelPowerMaximumRecordedTime OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string."
    ::= { cwsPtpModemColourlessRxChannelPowerEntry 5 }

cwsXcvrColourlessRxChannelPowerMinimumRecordedTime OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string."
    ::= { cwsPtpModemColourlessRxChannelPowerEntry 6 }

cwsPtpModemColourlessRxChannelStatusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemColourlessRxChannelStatusEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 27 }

cwsPtpModemColourlessRxChannelStatusEntry OBJECT-TYPE
    SYNTAX CwsPtpModemColourlessRxChannelStatusEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemColourlessRxChannelStatusTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpChannelChannelNumber, cwsPtpModemColourlessRxChannelStatusTableSnmpKey }
    ::= { cwsPtpModemColourlessRxChannelStatusTable 1 }

CwsPtpModemColourlessRxChannelStatusEntry ::= SEQUENCE { 
    cwsPtpModemColourlessRxChannelStatusTableSnmpKey Integer32,
    cwsPtpModemColourlessRxChannelStatusLossOfSignal TruthValue,
    cwsPtpModemColourlessRxChannelStatusHighAlarmStatus TruthValue,
    cwsPtpModemColourlessRxChannelStatusLowAlarmStatus TruthValue 
}

cwsPtpModemColourlessRxChannelStatusTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemColourlessRxChannelStatus"
    ::= { cwsPtpModemColourlessRxChannelStatusEntry 1 }

cwsPtpModemColourlessRxChannelStatusLossOfSignal OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Colourless Rx power Loss of Signal."
    ::= { cwsPtpModemColourlessRxChannelStatusEntry 2 }

cwsPtpModemColourlessRxChannelStatusHighAlarmStatus OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Optical Colourless Rx power high alarm status, boolean, true if alarm is raised, false if alarm is not raised."
    ::= { cwsPtpModemColourlessRxChannelStatusEntry 3 }

cwsPtpModemColourlessRxChannelStatusLowAlarmStatus OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Optical Colourless Rx power low alarm status, boolean, true if alarm is raised, false if alarm is not raised."
    ::= { cwsPtpModemColourlessRxChannelStatusEntry 4 }

cwsPtpModemColourlessTxChannelPowerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemColourlessTxChannelPowerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Colourless Tx Channel optical power related attributes."
    ::= { cienaWsPtpModemMIB 28 }

cwsPtpModemColourlessTxChannelPowerEntry OBJECT-TYPE
    SYNTAX CwsPtpModemColourlessTxChannelPowerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemColourlessTxChannelPowerTable."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpChannelChannelNumber, cwsPtpModemColourlessTxChannelPowerTableSnmpKey }
    ::= { cwsPtpModemColourlessTxChannelPowerTable 1 }

CwsPtpModemColourlessTxChannelPowerEntry ::= SEQUENCE { 
    cwsPtpModemColourlessTxChannelPowerTableSnmpKey Integer32,
    cwsXcvrColourlessTxChannelPowerActual Decimal1Dig,
    cwsXcvrColourlessTxChannelPowerMaximum Decimal1Dig,
    cwsXcvrColourlessTxChannelPowerMinimum Decimal1Dig,
    cwsXcvrColourlessTxChannelPowerMaximumRecordedTime StringMaxl32,
    cwsXcvrColourlessTxChannelPowerMinimumRecordedTime StringMaxl32 
}

cwsPtpModemColourlessTxChannelPowerTableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemColourlessTxChannelPower"
    ::= { cwsPtpModemColourlessTxChannelPowerEntry 1 }

cwsXcvrColourlessTxChannelPowerActual OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Actual Tx or Rx optical power in dBm."
    ::= { cwsPtpModemColourlessTxChannelPowerEntry 2 }

cwsXcvrColourlessTxChannelPowerMaximum OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Maximum Tx or Rx optical power in dBm."
    ::= { cwsPtpModemColourlessTxChannelPowerEntry 3 }

cwsXcvrColourlessTxChannelPowerMinimum OBJECT-TYPE
    SYNTAX Decimal1Dig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Minimum Tx or Rx optical power in dBm."
    ::= { cwsPtpModemColourlessTxChannelPowerEntry 4 }

cwsXcvrColourlessTxChannelPowerMaximumRecordedTime OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string."
    ::= { cwsPtpModemColourlessTxChannelPowerEntry 5 }

cwsXcvrColourlessTxChannelPowerMinimumRecordedTime OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string."
    ::= { cwsPtpModemColourlessTxChannelPowerEntry 6 }

cwsPtpAugPtpModemDiagnosticsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpAugPtpModemDiagnosticsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 29 }

cwsPtpAugPtpModemDiagnosticsEntry OBJECT-TYPE
    SYNTAX CwsPtpAugPtpModemDiagnosticsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpAugPtpModemDiagnosticsTable."
    AUGMENTS { cwsPtpDiagnosticsEntry }
    ::= { cwsPtpAugPtpModemDiagnosticsTable 1 }

CwsPtpAugPtpModemDiagnosticsEntry ::= SEQUENCE { 
    cwsPtpModemDiagnosticsNumberOfOdu Unsigned32 
}

cwsPtpModemDiagnosticsNumberOfOdu OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Number of ODUs present."
    ::= { cwsPtpAugPtpModemDiagnosticsEntry 1 }

cwsPtpModemOtu4Table OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemOtu4Entry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 30 }

cwsPtpModemOtu4Entry OBJECT-TYPE
    SYNTAX CwsPtpModemOtu4Entry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemOtu4Table."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemOtu4TableSnmpKey }
    ::= { cwsPtpModemOtu4Table 1 }

CwsPtpModemOtu4Entry ::= SEQUENCE { 
    cwsPtpModemOtu4TableSnmpKey Integer32,
    cwsPtpModemOtu4LossOfClock TruthValue,
    cwsPtpModemOtu4FrequencyOutOfRange TruthValue,
    cwsPtpModemOtu4LossOfFrame TruthValue,
    cwsPtpModemOtu4LossOfMultiFrame TruthValue,
    cwsPtpModemOtu4BackwardDefectIndication TruthValue,
    cwsPtpModemOtu4TrailTraceIdMismatch TruthValue 
}

cwsPtpModemOtu4TableSnmpKey OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Unique key for cwsPtpModemOtu4"
    ::= { cwsPtpModemOtu4Entry 1 }

cwsPtpModemOtu4LossOfClock OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "OTU4 Loss of Clock."
    ::= { cwsPtpModemOtu4Entry 2 }

cwsPtpModemOtu4FrequencyOutOfRange OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "OTU4 Frequency Out Of Range."
    ::= { cwsPtpModemOtu4Entry 3 }

cwsPtpModemOtu4LossOfFrame OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "OTU4 Loss of Frame."
    ::= { cwsPtpModemOtu4Entry 4 }

cwsPtpModemOtu4LossOfMultiFrame OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "OTU4 Loss of Multi-Frame."
    ::= { cwsPtpModemOtu4Entry 5 }

cwsPtpModemOtu4BackwardDefectIndication OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "OTU4 Backward Defect Indication."
    ::= { cwsPtpModemOtu4Entry 6 }

cwsPtpModemOtu4TrailTraceIdMismatch OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "OTU4 Trail Trace Identifier Mismatch."
    ::= { cwsPtpModemOtu4Entry 7 }

cwsPtpModemOdu4Table OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsPtpModemOdu4Entry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "None"
    ::= { cienaWsPtpModemMIB 31 }

cwsPtpModemOdu4Entry OBJECT-TYPE
    SYNTAX CwsPtpModemOdu4Entry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsPtpModemOdu4Table."
    INDEX { cwsPtpPtpsPtpIndex, cwsPtpModemOdu4OduId }
    ::= { cwsPtpModemOdu4Table 1 }

CwsPtpModemOdu4Entry ::= SEQUENCE { 
    cwsPtpModemOdu4OduId Integer32,
    cwsPtpModemOdu4OpenConnectionIndication TruthValue,
    cwsPtpModemOdu4AlarmIndicationSignal TruthValue,
    cwsPtpModemOdu4Locked TruthValue,
    cwsPtpModemOdu4SignalFail TruthValue,
    cwsPtpModemOdu4SignalDegrade TruthValue,
    cwsPtpModemOdu4TrailTraceIdMismatch TruthValue,
    cwsPtpModemOdu4BackwardDefectIndication TruthValue,
    cwsPtpModemOdu4PayloadLabelMismatch TruthValue,
    cwsPtpModemOdu4ClientSignalFailure TruthValue 
}

cwsPtpModemOdu4OduId OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "ODU id, can be ODU4.1 or ODU4.2."
    ::= { cwsPtpModemOdu4Entry 1 }

cwsPtpModemOdu4OpenConnectionIndication OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Open Connection Indication (OCI)."
    ::= { cwsPtpModemOdu4Entry 2 }

cwsPtpModemOdu4AlarmIndicationSignal OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Alarm Indication Signal (AIS)."
    ::= { cwsPtpModemOdu4Entry 3 }

cwsPtpModemOdu4Locked OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Locked (LCK)."
    ::= { cwsPtpModemOdu4Entry 4 }

cwsPtpModemOdu4SignalFail OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Signal Fail."
    ::= { cwsPtpModemOdu4Entry 5 }

cwsPtpModemOdu4SignalDegrade OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Signal Degrade."
    ::= { cwsPtpModemOdu4Entry 6 }

cwsPtpModemOdu4TrailTraceIdMismatch OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Trail Trace Identifier Mismatch."
    ::= { cwsPtpModemOdu4Entry 7 }

cwsPtpModemOdu4BackwardDefectIndication OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Backward Defect Indication."
    ::= { cwsPtpModemOdu4Entry 8 }

cwsPtpModemOdu4PayloadLabelMismatch OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Payload Label Mismatch."
    ::= { cwsPtpModemOdu4Entry 9 }

cwsPtpModemOdu4ClientSignalFailure OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Client Signal Failure."
    ::= { cwsPtpModemOdu4Entry 10 }



-- Conformance statements
cienaWsPtpModemObjects OBJECT IDENTIFIER
    ::= { cienaWsPtpModemMIB 1 }

cienaWsPtpModemConformance OBJECT IDENTIFIER
    ::= { cienaWsPtpModemMIB 2 }

cienaWsPtpModemGroups OBJECT IDENTIFIER
    ::= { cienaWsPtpModemConformance 1 }

cienaWsPtpModemGroup OBJECT-GROUP
    OBJECTS { 
        cwsPtpModemTransmitterLineSystemChannelNumber,
        cwsPtpModemFrequencyValue,
        cwsPtpModemFrequencyMinValue,
        cwsPtpModemFrequencyMaxValue,
        cwsPtpModemFrequencyActual,
        cwsPtpModemPowerValue,
        cwsPtpModemPowerMinValue,
        cwsPtpModemPowerMaxValue,
        cwsPtpModemLineSystemType,
        cwsPtpModemLineSystemWavelengthSpacing,
        cwsPtpModemCmdSlot,
        cwsPtpModemCmdPortIn,
        cwsPtpModemCmdPortOut,
        cwsPtpModemModemChannelContentionDetectionAvoidance,
        cwsPtpModemModemPerformanceOptimizationMode,
        cwsPtpModemModemCarrierCenteringMode,
        cwsPtpModemModemInterleaverMode,
        cwsPtpModemModemRotation,
        cwsPtpModemModemSpectralOccupancyMode,
        cwsPtpModemModemTxPowerReductionState,
        cwsPtpModemModemTxReductionMode,
        cwsPtpModemModemTxTuningMode,
        cwsPtpModemModemDifferentialEncoding,
        cwsPtpModemModemTxCompensationDispersionMode,
        cwsPtpModemModemTxCompensationDispersionValue,
        cwsPtpModemModemFastReceiverRecoveryState,
        cwsPtpModemModemLaserCenteringRange,
        cwsPtpModemPerformanceStatisticsSecondsSinceLastClear,
        cwsPtpModemPerformanceStatisticsFecUncorrectedBlockCount,
        cwsPtpModemPerformanceStatisticsHighCorrectionCountSeconds,
        cwsPtpModemPreFecBerActual,
        cwsPtpModemPreFecBerMax,
        cwsPtpModemPreFecBerMin,
        cwsPtpModemPreFecBerAverage,
        cwsPtpModemPostFecBerActual,
        cwsPtpModemPostFecBerMax,
        cwsPtpModemPostFecBerMin,
        cwsPtpModemPostFecBerAverage,
        cwsPtpModemQFactorActual,
        cwsPtpModemQFactorMax,
        cwsPtpModemQFactorMin,
        cwsPtpModemQFactorAverage,
        cwsPtpModemFecFrameErrorCountValue,
        cwsPtpModemFecFrameErrorCountSeconds,
        cwsPtpModemModemprefecsignalfailalarmActive,
        cwsPtpModemModemprefecsignalfailalarmthresholdDbq,
        cwsPtpModemModemprefecsignaldegradealarmActive,
        cwsPtpModemModemprefecsignaldegradealarmthresholdDbq,
        cwsPtpModemPreFecSignalFailFailStatus,
        cwsPtpModemModemprefecsignalfailthresholdDbq,
        cwsPtpModemModemprefecsignalfailthresholdBer,
        cwsPtpModemPreFecSignalDegradeDegradeStatus,
        cwsPtpModemModemprefecsignaldegradethresholdDbq,
        cwsPtpModemModemprefecsignaldegradethresholdBer,
        cwsPtpModemRxlinkdispersionTotal,
        cwsPtpModemRxlinkdispersionCompensation,
        cwsPtpModemTxlinkdispersionTotal,
        cwsPtpModemTxlinkdispersionActual,
        cwsPtpModemDifferentialGroupDelayMeanSupported,
        cwsPtpModemDifferentialGroupDelayEstimatedInstance,
        cwsPtpModemFastRxRecoveryState,
        cwsPtpModemFastRxRecoveryNetworkConfiguration,
        cwsPtpModemFastRxRecoveryPath1Dispersion,
        cwsPtpModemFastRxRecoveryPath2Dispersion,
        cwsXcvrColourlessRxChannelPowerActual,
        cwsXcvrColourlessRxChannelPowerMaximum,
        cwsXcvrColourlessRxChannelPowerMinimum,
        cwsXcvrColourlessRxChannelPowerMaximumRecordedTime,
        cwsXcvrColourlessRxChannelPowerMinimumRecordedTime,
        cwsPtpModemColourlessRxChannelStatusLossOfSignal,
        cwsPtpModemColourlessRxChannelStatusHighAlarmStatus,
        cwsPtpModemColourlessRxChannelStatusLowAlarmStatus,
        cwsXcvrColourlessTxChannelPowerActual,
        cwsXcvrColourlessTxChannelPowerMaximum,
        cwsXcvrColourlessTxChannelPowerMinimum,
        cwsXcvrColourlessTxChannelPowerMaximumRecordedTime,
        cwsXcvrColourlessTxChannelPowerMinimumRecordedTime,
        cwsPtpModemDiagnosticsNumberOfOdu,
        cwsPtpModemOtu4LossOfClock,
        cwsPtpModemOtu4FrequencyOutOfRange,
        cwsPtpModemOtu4LossOfFrame,
        cwsPtpModemOtu4LossOfMultiFrame,
        cwsPtpModemOtu4BackwardDefectIndication,
        cwsPtpModemOtu4TrailTraceIdMismatch,
        cwsPtpModemOdu4OpenConnectionIndication,
        cwsPtpModemOdu4AlarmIndicationSignal,
        cwsPtpModemOdu4Locked,
        cwsPtpModemOdu4SignalFail,
        cwsPtpModemOdu4SignalDegrade,
        cwsPtpModemOdu4TrailTraceIdMismatch,
        cwsPtpModemOdu4BackwardDefectIndication,
        cwsPtpModemOdu4PayloadLabelMismatch,
        cwsPtpModemOdu4ClientSignalFailure
    }
    STATUS current
    DESCRIPTION "Conformance Group"
    ::= { cienaWsPtpModemGroups 1 }

cienaWsPtpModemCompliances OBJECT IDENTIFIER
    ::= { cienaWsPtpModemConformance 2 }

cienaWsPtpModemCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance"
    MODULE MANDATORY-GROUPS { cienaWsPtpModemGroup }
    ::= { cienaWsPtpModemCompliances 1 }

END -- End module