path: root/MIBS/ciena/CIENA-WWP-LEOS-SYSTEM-CONFIG

WWP-LEOS-SYSTEM-CONFIG-MIB DEFINITIONS ::= BEGIN

	IMPORTS
		InetAddress, InetAddressType
			FROM INET-ADDRESS-MIB
		OBJECT-GROUP, MODULE-COMPLIANCE
			FROM SNMPv2-CONF
		enterprises, IpAddress, Unsigned32,
		MODULE-IDENTITY, NOTIFICATION-TYPE
			FROM SNMPv2-SMI
		DateAndTime, DisplayString, RowStatus,
		TruthValue, TEXTUAL-CONVENTION
			FROM SNMPv2-TC
		wwpModulesLeos
			FROM WWP-SMI;

--
-- Textual conventions
--
	FileName ::= TEXTUAL-CONVENTION
		DISPLAY-HINT 
			"255a"
		STATUS current
		DESCRIPTION
			"Represents the textual convention which defines the 
			name string and display hint"
		SYNTAX OCTET STRING (SIZE (1..64))

	SystemClientAdminState ::= TEXTUAL-CONVENTION
		STATUS current
		DESCRIPTION
			"This textual convention enumerates the administration state of
			a system FTP/TFTP client."
		SYNTAX INTEGER
			{
			enable(1),
			disable(2)
			}

	SystemServerAdminState ::= TEXTUAL-CONVENTION
		STATUS current
		DESCRIPTION
			"This textual convention enumerates the administration state of
			a system FTP/SFTP/TFTP server."
		SYNTAX INTEGER
			{
			enable(1),
			disable(2)
			}

--
-- Node definitions
--
	-- 1.3.6.1.4.1.6141.2.60.12
	wwpLeosSystemConfigMIB MODULE-IDENTITY
		LAST-UPDATED "201508200000Z"		-- August 20, 2015 at 00:00 GMT (201508200000Z)
		ORGANIZATION
			"Ciena, Inc"
		CONTACT-INFO
			"   Mib Meister
			115 North Sullivan Road
			Spokane Valley, WA 99037
			   	USA		 		
			   	Phone:  +1 509 242 9000
			Email:  support@ciena.com"
		DESCRIPTION
			"The MIB module for the WWP System Config information."
		REVISION "201508200000Z"		-- August 20, 2015 at 00:00 GMT (201508200000Z)
		DESCRIPTION
			"Defined wwpLeosSystemXFtpSftp, wwpLeosSystemXFtpSftpClient, and wwpLeosSystemXftpSftpClientAlgorithm
			along with all of the objects these nodes encompass, providing the ability to configure the algorithms
			used by the various functions of the SFTP client's SSH protocol when used by the xftp feature."
		REVISION "201507170000Z"		-- July 17, 2015 at 00:00 GMT (201507170000Z)
		DESCRIPTION
			"Corrected DESCRIPTION for wwpLeosSystemXFtpFtpServerSecret and
			wwpLeosSystemXFtpSFtpServerSecret."
		REVISION "201506220000Z"		-- June 22, 2015 at 00:00 GMT (201506220000Z)
		DESCRIPTION
			"Added wwpLeosSystemXFtpSecret."
		REVISION "201501210000Z"		-- January 21, 2015 at 00:00 GMT (201501210000Z)
		DESCRIPTION
			"Added wwpLeosSystemScpServerAdminState."
		REVISION "201411100000Z"		-- November 10, 2014 at 00:00 GMT (201411100000Z)
		DESCRIPTION
			"Defined SystemClientAdminState, wwpLeosSystemClients, wwpLeosSystemFtpClientAdminState,
			and wwpLeosSystemTftpClientAdminState to support ability to enable/disable ftp and tftp
			client connections from the device."
		REVISION "201410150000Z"		-- October 15, 2014 at 00:00 GMT (201410150000Z)
		DESCRIPTION
			"Changed the SYNTAX of wwpLeosSystemXFtpFtpServerSecret to OCTET STRING(SIZE(0..259)).
			Changed the SYNTAX of wwpLeosSystemXFtpSFtpServerSecret to OCTET STRING(SIZE(0..259))."
		REVISION "201407150000Z"		-- July 15, 2014 at 00:00 GMT (201407150000Z)
		DESCRIPTION
			"Updated descriptions in wwpLeosTelnetMaxBaseUserSessions,
			wwpLeosTelnetMaxAdminUserSessions, and wwpLeosTelnetMaxSuperUserSessions
			to be more accurate."
		REVISION "201304230000Z"		-- April 23, 2013 at 00:00 GMT (201304230000Z)
		DESCRIPTION
			"Miscellaneous spelling and description corrections."
		REVISION "201210300000Z"		-- October 30, 2012 at 00:00 GMT (201210300000Z)
		DESCRIPTION
			"Added wwpLeosSystemFtpServerAdminState and 
			wwpLeosSystemTftpServerAdminState for enable/disable of FTP/TFTP 
			server.  Added new entries to show status of /mnt/xftp directory
			along with its associated trap."
		REVISION "201209190000Z"		-- September 19, 2012 at 00:00 GMT (201209190000Z)
		DESCRIPTION
			"Added wwpLeosSystemServers for enable/disable of SFTP server."
		REVISION "201207060000Z"		-- July 6, 2012 at 00:00 GMT (201207060000Z)
		DESCRIPTION
			"Added three new tables for XFTP server settings."
		REVISION "201206270000Z"		-- June 27, 2012 at 00:00 GMT (201206270000Z)
		DESCRIPTION
			"Corrected string lengths."
		REVISION "201204160000Z"		-- April 16, 2012 at 00:00 GMT (201204160000Z)
		DESCRIPTION
			"Added a new table for Default Gateway to support IPv6 configuration.
			The old OID, wwpLeosSystemConfigDefaultGateway, will continue to
			support ipv4 configuration."
		REVISION "201111050000Z"		-- November 5, 2011 at 00:00 GMT (201111050000Z)
		DESCRIPTION
			"Added a new table for Guardian configuration"
		REVISION "201107050000Z"		-- July 5, 2011 at 00:00 GMT (201107050000Z)
		DESCRIPTION
			"Added a new object wwpLeosTelnetMaxAdminUserSessions."
		REVISION "200203160000Z"		-- March 16, 2002 at 00:00 GMT (200203160000Z)
		DESCRIPTION
			"Initial creation."
	::= { wwpModulesLeos 12 }

	-- 1.3.6.1.4.1.6141.2.60.12.1
	wwpLeosSystemConfigMIBObjects OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIB 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1
	wwpLeosSystemConfigAttr OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.1
	wwpLeosSystemConfigDefaultGateway OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Default gateway IP address."
	::= { wwpLeosSystemConfigAttr 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.2
	wwpLeosSystemConfigBootCmdFile OBJECT-TYPE
		SYNTAX FileName
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Name of the last command file successfully
			executed by the device."
	::= { wwpLeosSystemConfigAttr 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.3
	wwpLeosSystemConfigBootCfgFile OBJECT-TYPE
		SYNTAX FileName
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"This object specifies the bootup configuration file for the system.
			Setting is object is similar to setting default load config file name.
			When the device reboots, it attempts to load the file specified by
			wwpLeosSystemConfigBootCfgFile."
	::= { wwpLeosSystemConfigAttr 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.4
	wwpLeosSystemClockDateTime OBJECT-TYPE
		SYNTAX DateAndTime
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The current system date and time of box.
			
			There are no provisions for local time or
			daylight savings. All times use the 24 hr clock
			and are UTC.
			
			Because device time is UTC, only first 7 bytes of
			DateAndTime data are returned, as per RFC1903."
	::= { wwpLeosSystemConfigAttr 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.5
	wwpLeosSystemConfigSavePermFile OBJECT-TYPE
		SYNTAX FileName
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"This object sets the save file name
			to the value of wwpLeosSystemConfigSavePermFile.
			Whenever wwpLeosSystemConfigControl is set to 'save' and
			wwpLeosSystemConfigSaveFile is not set, the device uses
			wwpLeosSystemConfigSavePermFile as the file name
			to store config."
	::= { wwpLeosSystemConfigAttr 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.6
	wwpLeosSystemConfigLastFileNameReset OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Setting this object resets the name of the last configuration
			file that was successfully executed by the device."
	::= { wwpLeosSystemConfigAttr 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.7
	wwpLeosSystemServiceMode OBJECT-TYPE
		SYNTAX INTEGER
		{
			none(0),
			mpls(1),
			pbt(2),
			aoam(3)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Setting this object changes the service mode of operation.
			It causes the device to reboot. If this object is set to 'none' the
			device rejects the request and returns an error.
			Applicable to 311v only."
	::= { wwpLeosSystemConfigAttr 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.8
	wwpLeosSystemConfigBackupGateway OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Backup gateway IP address."
	::= { wwpLeosSystemConfigAttr 8 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.9
	wwpLeosSystemConfigCustomerCfgFile OBJECT-TYPE
		SYNTAX FileName
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"This object sets the name of the default customer configuration
			file, which is the file that is copied to the default configuration
			file during a reset-to-customer-default operation.  Setting this object to
			an empty string removes the file name from the system configuration."
	::= { wwpLeosSystemConfigAttr 9 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10
	wwpLeosSystemConfigDefaultGatewayTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemConfigDefaultGatewayEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the default gateways."
	::= { wwpLeosSystemConfigAttr 10 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1
	wwpLeosSystemConfigDefaultGatewayEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemConfigDefaultGatewayEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable."
		INDEX { wwpLeosSystemConfigDefaultGatewayIndex } 
	::= { wwpLeosSystemConfigDefaultGatewayTable 1 }


	WwpLeosSystemConfigDefaultGatewayEntry ::= SEQUENCE
		{
		wwpLeosSystemConfigDefaultGatewayIndex Integer32,
		wwpLeosSystemConfigDefaultGatewayInetAddrType InetAddressType,
		wwpLeosSystemConfigDefaultGatewayInetAddress InetAddress,
		wwpLeosSystemConfigDefaultGatewayInterfaceName DisplayString,
		wwpLeosSystemConfigDefaultGatewayMetric Integer32,
		wwpLeosSystemConfigDefaultGatewayStatus RowStatus
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1
	wwpLeosSystemConfigDefaultGatewayIndex OBJECT-TYPE
		SYNTAX Integer32 (1..16)
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Unique identifier to the table."
	::= { wwpLeosSystemConfigDefaultGatewayEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2
	wwpLeosSystemConfigDefaultGatewayInetAddrType OBJECT-TYPE
		SYNTAX InetAddressType
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"The Inet address type of default gateway. Used in conjunction with 
			wwpLeosSystemConfigDefaultGatewayInetAddress.
			When set to :
			Ipv4: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with 
			      InetAddressIPv4 from RFC 4001
			Ipv6: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with
			      InetAddressIPv6 from RFC 4001."
	::= { wwpLeosSystemConfigDefaultGatewayEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3
	wwpLeosSystemConfigDefaultGatewayInetAddress OBJECT-TYPE
		SYNTAX InetAddress
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Default gateway IP address. This OID must be used in 
			conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. 
			The InetAddress set here should be compliant with RFC 4001 InetAddressType.
			When this OID is set, wwpLeosSystemConfigDefaultGateway is set to 0.0.0.0."
	::= { wwpLeosSystemConfigDefaultGatewayEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4
	wwpLeosSystemConfigDefaultGatewayInterfaceName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Interface Name of the gateway, local or remote."
	::= { wwpLeosSystemConfigDefaultGatewayEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5
	wwpLeosSystemConfigDefaultGatewayMetric OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Metric of the gateway."
	::= { wwpLeosSystemConfigDefaultGatewayEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6
	wwpLeosSystemConfigDefaultGatewayStatus OBJECT-TYPE
		SYNTAX RowStatus
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Used to manage the creation and deletion of the conceptual rows in this table.
			To create a row in this table, a manager must set this object to 'createAndGo'. 
			To delete an entry, set this object to 'destroy'."
	::= { wwpLeosSystemConfigDefaultGatewayEntry 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11
	wwpLeosSystemConfigBackupGatewayTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemConfigBackupGatewayEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the default gateways"
	::= { wwpLeosSystemConfigAttr 11 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1
	wwpLeosSystemConfigBackupGatewayEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemConfigBackupGatewayEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable."
		INDEX { wwpLeosSystemConfigBackupGatewayIndex } 
	::= { wwpLeosSystemConfigBackupGatewayTable 1 }


	WwpLeosSystemConfigBackupGatewayEntry ::= SEQUENCE
		{
		wwpLeosSystemConfigBackupGatewayIndex Integer32,
		wwpLeosSystemConfigBackupGatewayInetAddrType InetAddressType,
		wwpLeosSystemConfigBackupGatewayInetAddress InetAddress,
		wwpLeosSystemConfigBackupGatewayInterfaceName DisplayString,
		wwpLeosSystemConfigBackupGatewayMetric Integer32,
		wwpLeosSystemConfigBackupGatewayStatus RowStatus
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1
	wwpLeosSystemConfigBackupGatewayIndex OBJECT-TYPE
		SYNTAX Integer32 (1..16)
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Unique identifier to the table."
	::= { wwpLeosSystemConfigBackupGatewayEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2
	wwpLeosSystemConfigBackupGatewayInetAddrType OBJECT-TYPE
		SYNTAX InetAddressType
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"The Inet address type of backup gateway. Used in conjunction with 
			wwpLeosSystemConfigBackupGatewayInetAddress.
			When set to :
			ipv4: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with 
			      InetAddressIPv4 from RFC 4001
			ipv6: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with
			      InetAddressIPv6 from RFC 4001."
	::= { wwpLeosSystemConfigBackupGatewayEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3
	wwpLeosSystemConfigBackupGatewayInetAddress OBJECT-TYPE
		SYNTAX InetAddress
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Backup gateway IP address. This OID must be used in 
			conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. 
			The InetAddress set here should be compliant with rfc 4001 InetAddressType.
			When this OID is set, wwpLeosSystemConfigBackupGateway is set ot 0.0.0.0."
	::= { wwpLeosSystemConfigBackupGatewayEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4
	wwpLeosSystemConfigBackupGatewayInterfaceName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Interface Name of the gateway, local or remote."
	::= { wwpLeosSystemConfigBackupGatewayEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5
	wwpLeosSystemConfigBackupGatewayMetric OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Metric of the gateway."
	::= { wwpLeosSystemConfigBackupGatewayEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6
	wwpLeosSystemConfigBackupGatewayStatus OBJECT-TYPE
		SYNTAX RowStatus
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Used to manage the creation and deletion of the conceptual rows in this table.
			To create a row in this table, set this object to 'createAndGo'. 
			To delete an entry, set this object to 'destroy'."
	::= { wwpLeosSystemConfigBackupGatewayEntry 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2
	wwpLeosSystemConfig OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.1
	wwpLeosSystemConfigSaveFileName OBJECT-TYPE
		SYNTAX FileName
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"wwpLeosSystemConfigSaveFileName specifies the name of the config
			file to be used when wwpLeosSystemConfigControl has been set
			to 'save'. If this object is not set the device uses
			the file name specified by wwpLeosSystemConfigSavePermFile.
			If wwpLeosSystemConfigSavePermFile is also not set, the default configuration
			file name i.e startup-config is used to save the config.
			Once 'wwpLeosSystemConfigControl' has been successfully applied,
			a read on wwpLeosSystemConfigSaveFileName always returns an empty
			string else it shows what the user has configured."
	::= { wwpLeosSystemConfig 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.2
	wwpLeosSystemConfigControl OBJECT-TYPE
		SYNTAX INTEGER
		{
			none(0),
			save(1),
			mfgDefaultCfg(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Controls configuration options on the device.
			The current options are:
			save:   
			to make the configuration changes made
			using SNMP persistent across a reboot.
			
			mfgDefaultCfg:
			Set system configuration to factory defaults.
			Note: This wipes out all the current
			configuration including password and VLAN
			information.
			
			If the system does not support any of these control
			configuration options, it returns an error while
			trying to set this object to the specific option.
			
			A read on this object returns none(0)."
	::= { wwpLeosSystemConfig 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.3
	wwpLeosSystemConfigFilepath OBJECT-TYPE
		SYNTAX FileName
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Returns the path for configuration related files."
	::= { wwpLeosSystemConfig 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.4
	wwpLeosSystemConfigFileTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemConfigFileEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the configs"
	::= { wwpLeosSystemConfig 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1
	wwpLeosSystemConfigFileEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemConfigFileEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemConfigFileTable."
		INDEX { wwpLeosSystemConfigFileIndex } 
	::= { wwpLeosSystemConfigFileTable 1 }


	WwpLeosSystemConfigFileEntry ::= SEQUENCE
		{
		wwpLeosSystemConfigFileIndex Integer32,
		wwpLeosSystemConfigFileName FileName,
		wwpLeosSystemConfigActivateFile INTEGER
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1
	wwpLeosSystemConfigFileIndex OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Unique identifier to the table."
	::= { wwpLeosSystemConfigFileEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2
	wwpLeosSystemConfigFileName OBJECT-TYPE
		SYNTAX FileName
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The name of the configuration file."
	::= { wwpLeosSystemConfigFileEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3
	wwpLeosSystemConfigActivateFile OBJECT-TYPE
		SYNTAX INTEGER
		{
			loadCfg(1),
			resetToCfg(2),
			none(3)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' configuration.
			If the operation is successful, this object performs
			       the CLI equivalent to these commands and returns the status.
			
			Setting this object to 'resetToCfg' kills the load module, reloads a new load module and
			applies the config file specified by wwpLeosSystemConfigFileName.
			
			Setting this object to 'none' does nothing."
		DEFVAL {  { none }  } 
	::= { wwpLeosSystemConfigFileEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.3
	wwpLeosSystemTelnet OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.3.1
	wwpLeosTelnetMaxBaseUserSessions OBJECT-TYPE
		SYNTAX Integer32 (0..10)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The max number of limited user CLI sessions
			for the device. Includes both SSH and telnet sessions."
	::= { wwpLeosSystemTelnet 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.3.2
	wwpLeosTelnetMaxSuperUserSessions OBJECT-TYPE
		SYNTAX Integer32 (0..10)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The max number of super user CLI sessions
			for the device. Includes both SSH and telnet sessions."
	::= { wwpLeosSystemTelnet 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.3.3
	wwpLeosTelnetMaxAdminUserSessions OBJECT-TYPE
		SYNTAX Integer32 (0..10)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The max number of admin users CLI sessions for
			the device. Includes both SSH and telnet sessions."
	::= { wwpLeosSystemTelnet 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7
	wwpLeosSystemCpuLoadQuery OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.1
	wwpLeosSystemCpuLoad1Min OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The OID to display CPU load in last 1 minute.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.2
	wwpLeosSystemCpuLoad10Min OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The OID to display CPU load in last 10 minutes.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.3
	wwpLeosSystemCpuLoad15Min OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The OID to display CPU load in last 15 minutes.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.4
	wwpLeosSystemCpuLoad5Min OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The OID to display CPU load in last 5 minutes.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.5
	wwpLeosSystemCpuLoad1MinMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The minimum 1 minute CPU load average.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.6
	wwpLeosSystemCpuLoad1MinMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The maximum 1 minute CPU load average.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.7
	wwpLeosSystemCpuLoad1MinState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 1 minute CPU load average state."
	::= { wwpLeosSystemCpuLoadQuery 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.8
	wwpLeosSystemCpuLoad15MinMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The minimum 15 minute CPU load average.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 8 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.9
	wwpLeosSystemCpuLoad15MinMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The maximum 15 minute CPU load average.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 9 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.10
	wwpLeosSystemCpuLoad15MinState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 15 minute CPU load average state."
	::= { wwpLeosSystemCpuLoadQuery 10 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.11
	wwpLeosSystemCpuLoad5MinMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The minimum 5 minute CPU load average.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 11 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.12
	wwpLeosSystemCpuLoad5MinMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The maximum 5 minute CPU load average.  This value is an integer representation of the CPU load (load average * 100)."
	::= { wwpLeosSystemCpuLoadQuery 12 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.7.13
	wwpLeosSystemCpuLoad5MinState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 5 minute CPU load average state."
	::= { wwpLeosSystemCpuLoadQuery 13 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.8
	wwpLeosSystemConfigNotif OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 8 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.8.1
	wwpLeosSystemConfigNotifTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemConfigNotifEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the configuration file line numbers.
			This table is only used when sending wwpLeosImproperCmdInConfigFile
			notification. No Get, GetNext or Set is allowed in this table."
	::= { wwpLeosSystemConfigNotif 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1
	wwpLeosSystemConfigNotifEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemConfigNotifEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemConfigNotifTable.
			No Get, GetNext or Set is allowed in this table."
		INDEX { wwpLeosSystemConfigFileIndex } 
	::= { wwpLeosSystemConfigNotifTable 1 }


	WwpLeosSystemConfigNotifEntry ::= SEQUENCE
		{
		wwpLeosSystemConfigErrLineNum Integer32,
		wwpLeosSystemConfigErrStr DisplayString,
		wwpLeosSystemConfigErrLinesTotal Integer32
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1
	wwpLeosSystemConfigErrLineNum OBJECT-TYPE
		SYNTAX Integer32 (0..64)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The OID is sent in the wwpLeosImproperCmdInConfigFile
			trap to identify the line number that failed
			when the configuration was applied. No Get, GetNext or Set is
			allowed in this table."
	::= { wwpLeosSystemConfigNotifEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2
	wwpLeosSystemConfigErrStr OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The OID is  wwpLeosSystemConfigErrStr
			trap to identify the line that failed
			when the configuration was applied. No Get, GetNext or Set is
			allowed on this table."
	::= { wwpLeosSystemConfigNotifEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3
	wwpLeosSystemConfigErrLinesTotal OBJECT-TYPE
		SYNTAX Integer32 (0..64)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The OID is sent in the wwpLeosImproperCmdInConfigFile
			trap to identify the total line numbers that failed
			when the configuration was applied. No Get, GetNext or Set is
			allowed in this table."
	::= { wwpLeosSystemConfigNotifEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9
	wwpLeosSystemMemoryUsageQuery OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 9 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1
	wwpLeosSystemMemoryUsageTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemMemoryUsageEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Table of Memory Usage for various Memory Pools."
	::= { wwpLeosSystemMemoryUsageQuery 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1
	wwpLeosSystemMemoryUsageEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemMemoryUsageEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry for each Memory Pool."
		INDEX { wwpLeosSystemMemoryUsagePoolIndex } 
	::= { wwpLeosSystemMemoryUsageTable 1 }


	WwpLeosSystemMemoryUsageEntry ::= SEQUENCE
		{
		wwpLeosSystemMemoryUsagePoolIndex INTEGER,
		wwpLeosSystemMemoryUsageMemoryTotal Unsigned32,
		wwpLeosSystemMemoryUsageMemoryLWM Unsigned32,
		wwpLeosSystemMemoryUsageMemoryFree Unsigned32,
		wwpLeosSystemMemoryUsageStatus INTEGER,
		wwpLeosSystemMemoryUsageMemoryUsed Unsigned32,
		wwpLeosSystemMemoryUsageMemoryAvailable Unsigned32
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1
	wwpLeosSystemMemoryUsagePoolIndex OBJECT-TYPE
		SYNTAX INTEGER
		{
			ose-pool-1(1),
			global-heap(2),
			malloc-heap(3)
		}
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The Memory Pool type."
	::= { wwpLeosSystemMemoryUsageEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2
	wwpLeosSystemMemoryUsageMemoryTotal OBJECT-TYPE
		SYNTAX Unsigned32
		UNITS
			"bytes"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Total size of the Memory Pool in bytes."
	::= { wwpLeosSystemMemoryUsageEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3
	wwpLeosSystemMemoryUsageMemoryLWM OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Lowest free memory in the Memory Pool in bytes.
			Not supported in SAOS 6.x"
	::= { wwpLeosSystemMemoryUsageEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4
	wwpLeosSystemMemoryUsageMemoryFree OBJECT-TYPE
		SYNTAX Unsigned32
		UNITS
			"bytes"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Amount of free memory in the Memory Pool in bytes.
			This corresponds to the CLI's memory never used."
	::= { wwpLeosSystemMemoryUsageEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5
	wwpLeosSystemMemoryUsageStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			lowMemory(2),
			notSupported(3)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Denotes if the free memory amount is normal or below limit."
	::= { wwpLeosSystemMemoryUsageEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6
	wwpLeosSystemMemoryUsageMemoryUsed OBJECT-TYPE
		SYNTAX Unsigned32
		UNITS
			"bytes"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Amount of used memory in the Memory Pool in bytes."
	::= { wwpLeosSystemMemoryUsageEntry 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7
	wwpLeosSystemMemoryUsageMemoryAvailable OBJECT-TYPE
		SYNTAX Unsigned32
		UNITS
			"bytes"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Amount of available memory in the Memory Pool in bytes."
	::= { wwpLeosSystemMemoryUsageEntry 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10
	wwpLeosSystemXFtp OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 10 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.1
	wwpLeosSystemXFtpMode OBJECT-TYPE
		SYNTAX INTEGER
		{
			tftp(1),
			ftp(2),
			sftp(3)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Select between modes of file transfer.
			The default mode is tftp."
	::= { wwpLeosSystemXFtp 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.2
	wwpLeosSystemXFtpServer OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"IP address or the host name of default server."
	::= { wwpLeosSystemXFtp 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.3
	wwpLeosSystemXFtpUserName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Name used to login with."
	::= { wwpLeosSystemXFtp 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.4
	wwpLeosSystemXFtpPasswd OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..128))
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Password used to login with."
	::= { wwpLeosSystemXFtp 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.5
	wwpLeosSystemXFtpNumOfRetries OBJECT-TYPE
		SYNTAX Integer32 (1..10)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Number of times to retry a file transfer request if it fails."
	::= { wwpLeosSystemXFtp 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.6
	wwpLeosSystemXFtpRetryInterval OBJECT-TYPE
		SYNTAX Integer32 (1..300)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Length of time in seconds to wait before retrying a file transfer if it fails."
	::= { wwpLeosSystemXFtp 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.7
	wwpLeosSystemXFtpConnectionTimeout OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Length of time in seconds to wait before connection times out."
	::= { wwpLeosSystemXFtp 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.8
	wwpLeosSystemXFtpTFtpServerTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXFtpTFtpServerEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the default TFTP server"
	::= { wwpLeosSystemXFtp 8 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1
	wwpLeosSystemXFtpTFtpServerEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXFtpTFtpServerEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable."
		INDEX { wwpLeosSystemXFtpTFtpServerIndex } 
	::= { wwpLeosSystemXFtpTFtpServerTable 1 }


	WwpLeosSystemXFtpTFtpServerEntry ::= SEQUENCE
		{
		wwpLeosSystemXFtpTFtpServerIndex Integer32,
		wwpLeosSystemXFtpTFtpServerHostName DisplayString,
		wwpLeosSystemXFtpTFtpServerRowStatus RowStatus
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1
	wwpLeosSystemXFtpTFtpServerIndex OBJECT-TYPE
		SYNTAX Integer32 (1)
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Unique identifier to the table."
	::= { wwpLeosSystemXFtpTFtpServerEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2
	wwpLeosSystemXFtpTFtpServerHostName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Host name or IP address of the default TFTP server."
	::= { wwpLeosSystemXFtpTFtpServerEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6
	wwpLeosSystemXFtpTFtpServerRowStatus OBJECT-TYPE
		SYNTAX RowStatus
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Used to manage the creation and deletion of the conceptual rows in this table.
			To create a row in this table, set this object to 'createAndGo'.
			To delete an entry, set this object to 'destroy'.
			At the current time, there is only one, static row in this table, with index 1."
	::= { wwpLeosSystemXFtpTFtpServerEntry 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9
	wwpLeosSystemXFtpFtpServerTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXFtpFtpServerEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the default FTP server."
	::= { wwpLeosSystemXFtp 9 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1
	wwpLeosSystemXFtpFtpServerEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXFtpFtpServerEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable."
		INDEX { wwpLeosSystemXFtpFtpServerIndex } 
	::= { wwpLeosSystemXFtpFtpServerTable 1 }


	WwpLeosSystemXFtpFtpServerEntry ::= SEQUENCE
		{
		wwpLeosSystemXFtpFtpServerIndex Integer32,
		wwpLeosSystemXFtpFtpServerHostName DisplayString,
		wwpLeosSystemXFtpFtpServerUserName DisplayString,
		wwpLeosSystemXFtpFtpServerPassword DisplayString,
		wwpLeosSystemXFtpFtpServerSecret OCTET STRING,
		wwpLeosSystemXFtpFtpServerRowStatus RowStatus
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1
	wwpLeosSystemXFtpFtpServerIndex OBJECT-TYPE
		SYNTAX Integer32 (1)
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Unique identifier to the table."
	::= { wwpLeosSystemXFtpFtpServerEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2
	wwpLeosSystemXFtpFtpServerHostName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Host name or IP address of the default FTP server."
	::= { wwpLeosSystemXFtpFtpServerEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3
	wwpLeosSystemXFtpFtpServerUserName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"User name / login ID to be used with the default FTP server."
	::= { wwpLeosSystemXFtpFtpServerEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4
	wwpLeosSystemXFtpFtpServerPassword OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Password to be used with the default FTP server.
			Returns an empty string when read.
			Either the password or the secret may be set, but not both."
	::= { wwpLeosSystemXFtpFtpServerEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5
	wwpLeosSystemXFtpFtpServerSecret OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (0..259))
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Password secret to be used with the default FTP server.
			Either the password or the secret may be set, but not both."
	::= { wwpLeosSystemXFtpFtpServerEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6
	wwpLeosSystemXFtpFtpServerRowStatus OBJECT-TYPE
		SYNTAX RowStatus
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Used to manage the creation and deletion of the conceptual rows in this table.
			To create a row in this table, set this object to 'createAndGo'.
			To delete an entry, set this object to 'destroy'.
			At the current time, there is only one, static row in this table, with index 1."
	::= { wwpLeosSystemXFtpFtpServerEntry 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10
	wwpLeosSystemXFtpSFtpServerTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXFtpSFtpServerEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the default SFTP server"
	::= { wwpLeosSystemXFtp 10 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1
	wwpLeosSystemXFtpSFtpServerEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXFtpSFtpServerEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable."
		INDEX { wwpLeosSystemXFtpSFtpServerIndex } 
	::= { wwpLeosSystemXFtpSFtpServerTable 1 }


	WwpLeosSystemXFtpSFtpServerEntry ::= SEQUENCE
		{
		wwpLeosSystemXFtpSFtpServerIndex Integer32,
		wwpLeosSystemXFtpSFtpServerHostName DisplayString,
		wwpLeosSystemXFtpSFtpServerUserName DisplayString,
		wwpLeosSystemXFtpSFtpServerPassword DisplayString,
		wwpLeosSystemXFtpSFtpServerSecret OCTET STRING,
		wwpLeosSystemXFtpSFtpServerRowStatus RowStatus
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1
	wwpLeosSystemXFtpSFtpServerIndex OBJECT-TYPE
		SYNTAX Integer32 (1)
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Unique identifier to the table."
	::= { wwpLeosSystemXFtpSFtpServerEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2
	wwpLeosSystemXFtpSFtpServerHostName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Host name or IP address of the default SFTP server."
	::= { wwpLeosSystemXFtpSFtpServerEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3
	wwpLeosSystemXFtpSFtpServerUserName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"User name / login ID to be used with the default SFTP server."
	::= { wwpLeosSystemXFtpSFtpServerEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4
	wwpLeosSystemXFtpSFtpServerPassword OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Password to be used with the default SFTP server.
			Returns an empty string when read.
			Either the password or the secret may be set, but not both."
	::= { wwpLeosSystemXFtpSFtpServerEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5
	wwpLeosSystemXFtpSFtpServerSecret OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (0..259))
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Password secret to be used with the default SFTP server.
			Either the password or the secret may be set, but not both."
	::= { wwpLeosSystemXFtpSFtpServerEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6
	wwpLeosSystemXFtpSFtpServerRowStatus OBJECT-TYPE
		SYNTAX RowStatus
		ACCESS read-create
		STATUS current
		DESCRIPTION
			"Used to manage the creation and deletion of the conceptual rows in this table.
			To create a row in this table, set this object to 'createAndGo'.
			To delete an entry, set this object to 'destroy'.
			At the current time, there is only one, static row in this table, with index 1."
	::= { wwpLeosSystemXFtpSFtpServerEntry 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.11
	wwpLeosSystemXFtpSecret OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (0..259))
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the pre-encypted secret. This global secret will be 
			automatically applied to either the ftp or sftp table, depending
			on the value of the wwpLeosSystemXFtpMode object."
	::= { wwpLeosSystemXFtp 11 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12
	wwpLeosSystemXFtpSftp OBJECT IDENTIFIER ::= { wwpLeosSystemXFtp 12 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1
	wwpLeosSystemXFtpSftpClient OBJECT IDENTIFIER ::= { wwpLeosSystemXFtpSftp 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1
	wwpLeosSystemXftpSftpClientAlgorithm OBJECT IDENTIFIER ::= { wwpLeosSystemXFtpSftpClient 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1
	wwpLeosSystemXftpSftpClientKexAlgorithmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientKexAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the SFTP Client's SSH key-exchange (KEX) algorithms."
	::= { wwpLeosSystemXftpSftpClientAlgorithm 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1
	wwpLeosSystemXftpSftpClientKexAlgorithmEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXftpSftpClientKexAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXftpSftpClientKexAlgorithmTable."
		INDEX { wwpLeosSystemXftpSftpClientKexAlgorithmIndex } 
	::= { wwpLeosSystemXftpSftpClientKexAlgorithmTable 1 }


	WwpLeosSystemXftpSftpClientKexAlgorithmEntry ::= SEQUENCE
		{
		wwpLeosSystemXftpSftpClientKexAlgorithmIndex Unsigned32,
		wwpLeosSystemXftpSftpClientKexAlgorithmName DisplayString,
		wwpLeosSystemXftpSftpClientKexAlgorithmAdminState INTEGER,
		wwpLeosSystemXftpSftpClientKexAlgorithmOperState INTEGER,
		wwpLeosSystemXftpSftpClientKexAlgorithmPriority Unsigned32
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.1
	wwpLeosSystemXftpSftpClientKexAlgorithmIndex OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An arbitrary index into the table identifying a unique algorithm as
			identified by the value of wwpLeosSystemXftpSftpClientKexAlgorithmName."
	::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.2
	wwpLeosSystemXftpSftpClientKexAlgorithmName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Name of the algorithm as used by the SFTP client's SSH protocol
			when negotiating the key exchange algorithm with SSH servers."
	::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.3
	wwpLeosSystemXftpSftpClientKexAlgorithmAdminState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative state of the algorithm, indicating whether the
			administrative settings are set to allow the inclusion of the
			specified algorithm in the key exchange algorithm negotiation process.
			Such inclusion or exclusion of the algorithm is indicated by the
			corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmOperState."
	::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.4
	wwpLeosSystemXftpSftpClientKexAlgorithmOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational state of the algorithm, indicating whether the
			specified algorithm will be included in the key exchange algorithm
			negotiation process.  The operational state is determined based on
			the corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmAdminState
			as well as other system attributes which may limit the allowable
			algorithms that may be used."
	::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.5
	wwpLeosSystemXftpSftpClientKexAlgorithmPriority OBJECT-TYPE
		SYNTAX Unsigned32 (1..3)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The priority, or importance, of the specified algorithm amongst
			the other algorithms in this table.  Value 1 is highest priority.
			During the key exchange algorithm negotiation, the SFTP client's
			SSH protocol will consider all operationally enabled algorithms
			in order of priority, as part of the algorithm negotiation process.
			When the priority of one algorithm is set to a new value, it will
			necessarily cause the priority of other algorithms to adjust in
			order to make room for the new set priority of the algorithm."
	::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2
	wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the SFTP client's SSH server host key algorithms."
	::= { wwpLeosSystemXftpSftpClientAlgorithm 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1
	wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable."
		INDEX { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex } 
	::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable 1 }


	WwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry ::= SEQUENCE
		{
		wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex Unsigned32,
		wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName DisplayString,
		wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState INTEGER,
		wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState INTEGER,
		wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmPriority Unsigned32
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.1
	wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An arbitrary index into the table identifying a unique algorithm as
			identified by the value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName."
	::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.2
	wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Name of the algorithm as used by the SFTP client's SSH protocol when
			negotiating the server host key algorithm with SSH servers."
	::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.3
	wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative state of the algorithm, indicating whether the
			administrative settings are set to allow the inclusion of the
			specified algorithm in the server host key algorithm negotiation
			process.  Such inclusion or exclusion of the algorithm is indicated
			by the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState."
	::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.4
	wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational state of the algorithm, indicating whether the
			specified algorithm will be included in the server host key algorithm
			negotiation process.  The operational state is determined based on
			the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState
			as well as other system attributes which may limit the allowable
			algorithms that may be used."
	::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.5
	wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmPriority OBJECT-TYPE
		SYNTAX Unsigned32 (1..6)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The priority, or importance, of the specified algorithm amongst
			the other algorithms in this table.  Value 1 is highest priority.
			During the server host key algorithm negotiation, the SFTP client's
			SSH protocol will consider all operationally enabled algorithms in
			order of priority, as part of the algorithm negotiation process.
			When the priority of an algorithm is set to a new value, it will
			necessarily cause the priority of other algorithms to adjust in
			order to make room for the new set priority of the algorithm."
	::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3
	wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the SFTP client's SSH encryption algorithms."
	::= { wwpLeosSystemXftpSftpClientAlgorithm 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1
	wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable."
		INDEX { wwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex } 
	::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable 1 }


	WwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry ::= SEQUENCE
		{
		wwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex Unsigned32,
		wwpLeosSystemXftpSftpClientEncryptionAlgorithmName DisplayString,
		wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState INTEGER,
		wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState INTEGER,
		wwpLeosSystemXftpSftpClientEncryptionAlgorithmPriority Unsigned32
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.1
	wwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An arbitrary index into the table identifying a unique algorithm as
			identified by the value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState."
	::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.2
	wwpLeosSystemXftpSftpClientEncryptionAlgorithmName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Name of the algorithm as used by the SFTP client SSH protocol
			when negotiating the encryption algorithm with SSH servers."
	::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.3
	wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative state of the algorithm, indicating whether the
			administrative settings are set to allow the inclusion of the
			specified algorithm in the encryption algorithm negotiation process.
			Such inclusion or exclusion of the algorithm is indicated by the
			corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState."
	::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.4
	wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational state of the algorithm, indicating whether the
			specified algorithm will be included in the encryption algorithm
			negotiation process.  The operational state is determined based on
			the corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState
			as well as other system attributes which may limit the allowable
			algorithms that may be used."
	::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.5
	wwpLeosSystemXftpSftpClientEncryptionAlgorithmPriority OBJECT-TYPE
		SYNTAX Unsigned32 (1..12)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The priority, or importance, of the specified algorithm amongst
			the other algorithms in this table.  Value 1 is highest priority.
			During the encryption algorithm negotiation, the SFTP client's SSH
			protocol will consider all operationally enabled algorithms in
			order of priority, as part of the algorithm negotiation process.
			When the priority of one algorithm is set to a new value, it will
			necessarily cause the priority of other algorithms to adjust in
			order to make room for the new set priority of the algorithm."
	::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4
	wwpLeosSystemXftpSftpClientMacAlgorithmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientMacAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the SFTP client's SSH message
			authentication code (MAC) algorithms."
	::= { wwpLeosSystemXftpSftpClientAlgorithm 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1
	wwpLeosSystemXftpSftpClientMacAlgorithmEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXftpSftpClientMacAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXftpSftpClientMacAlgorithmTable."
		INDEX { wwpLeosSystemXftpSftpClientMacAlgorithmIndex } 
	::= { wwpLeosSystemXftpSftpClientMacAlgorithmTable 1 }


	WwpLeosSystemXftpSftpClientMacAlgorithmEntry ::= SEQUENCE
		{
		wwpLeosSystemXftpSftpClientMacAlgorithmIndex Unsigned32,
		wwpLeosSystemXftpSftpClientMacAlgorithmName DisplayString,
		wwpLeosSystemXftpSftpClientMacAlgorithmAdminState INTEGER,
		wwpLeosSystemXftpSftpClientMacAlgorithmOperState INTEGER,
		wwpLeosSystemXftpSftpClientMacAlgorithmPriority Unsigned32
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.1
	wwpLeosSystemXftpSftpClientMacAlgorithmIndex OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An arbitrary index into the table identifying a unique algorithm as
			identified by the value of wwpLeosSystemXftpSftpClientMacAlgorithmName."
	::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.2
	wwpLeosSystemXftpSftpClientMacAlgorithmName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Name of the algorithm as used by the SFTP client's SSH protocol when
			negotiating the message authentication code algorithm with SSH servers."
	::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.3
	wwpLeosSystemXftpSftpClientMacAlgorithmAdminState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative state of the algorithm, indicating whether the
			administrative settings are set to allow the inclusion of the
			specified algorithm in the message authentication code algorithm
			negotiation process.  Such inclusion or exclusion of the algorithm is
			indicated by the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmOperState."
	::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.4
	wwpLeosSystemXftpSftpClientMacAlgorithmOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational state of the algorithm, indicating whether the
			specified algorithm will be included in the message authentication code
			algorithm negotiation process.  The operational state is determined based on
			the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmAdminState
			as well as other system attributes which may limit the allowable
			algorithms that may be used."
	::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.5
	wwpLeosSystemXftpSftpClientMacAlgorithmPriority OBJECT-TYPE
		SYNTAX Unsigned32 (1..6)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The priority, or importance, of the specified algorithm amongst
			the other algorithms in this table.  Value 1 is highest priority.
			During the message authentication code algorithm negotiation, the
			SFTP client's SSH protocol will consider all operationally enabled
			algorithms in order or priority, as part of the algorithm negotiation
			process.  When the priority of an algorithm is set to a new value,
			it will necessarily cause the priority of other algorithms to adjust
			in order to make room for the new set priority of the algorithm."
	::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5
	wwpLeosSystemXftpSftpClientCompressionAlgorithmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientCompressionAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The (conceptual) table listing the SFTP client's SSH compression algorithms.
			
			NOTE: At this time the system xftp feature only supports 'none'
			compression algorithm. This table is provided for completeness
			since the compression algorithm is one of the algorithms negotiated
			during SSH connections."
	::= { wwpLeosSystemXftpSftpClientAlgorithm 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1
	wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry OBJECT-TYPE
		SYNTAX WwpLeosSystemXftpSftpClientCompressionAlgorithmEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An entry (conceptual row) in the wwpLeosSystemXftpSftpClientCompressionAlgorithmTable."
		INDEX { wwpLeosSystemXftpSftpClientCompressionAlgorithmIndex } 
	::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmTable 1 }


	WwpLeosSystemXftpSftpClientCompressionAlgorithmEntry ::= SEQUENCE
		{
		wwpLeosSystemXftpSftpClientCompressionAlgorithmIndex Unsigned32,
		wwpLeosSystemXftpSftpClientCompressionAlgorithmName DisplayString,
		wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState INTEGER,
		wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState INTEGER,
		wwpLeosSystemXftpSftpClientCompressionAlgorithmPriority Unsigned32
		}

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.1
	wwpLeosSystemXftpSftpClientCompressionAlgorithmIndex OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"An arbitrary index into the table identifying a unique algorithm as
			identified by the value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState."
	::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.2
	wwpLeosSystemXftpSftpClientCompressionAlgorithmName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Name of the algorithm as used by the SFTP client SSH protocol
			when negotiating the compression algorithm with SSH servers."
	::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.3
	wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative state of the algorithm, indicating whether the
			administrative settings are set to allow the inclusion of the
			specified algorithm in the compression algorithm negotiation process.
			Such inclusion or exclusion of the algorithm is indicated by the
			corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState."
	::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.4
	wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational state of the algorithm, indicating whether the
			specified algorithm will be included in the compression algorithm
			negotiation process.  The operational state is determined based on
			the corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState
			as well as other system attributes which may limit the allowable
			algorithms that may be used."
	::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.5
	wwpLeosSystemXftpSftpClientCompressionAlgorithmPriority OBJECT-TYPE
		SYNTAX Unsigned32 (1)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The priority, or importance, of the specified algorithm amongst
			the other algorithms in this table.  Value 1 is highest priority.
			During the compression algorithm negotiation, the SFTP client's SSH
			protocol will consider all operationally enabled algorithms in
			order of priority, as part of the algorithm negotiation process.
			When the priority of one algorithm is set to a new value, it will
			necessarily cause the priority of other algorithms to adjust in
			order to make room for the new set priority of the algorithm."
	::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11
	wwpLeosSystemCpuUtilization OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 11 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.1
	wwpLeosSystemCpuUtilizationLast5Seconds OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Average 5 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.2
	wwpLeosSystemCpuUtilizationLast5SecondsMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum 5 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.3
	wwpLeosSystemCpuUtilizationLast5SecondsMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The maximum 5 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.4
	wwpLeosSystemCpuUtilizationLast5SecondsState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 5 second CPU usage state."
	::= { wwpLeosSystemCpuUtilization 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.5
	wwpLeosSystemCpuUtilizationLast10Seconds OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 10 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.6
	wwpLeosSystemCpuUtilizationLast10SecondsMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum 10 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.7
	wwpLeosSystemCpuUtilizationLast10SecondsMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Maximum 10 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.8
	wwpLeosSystemCpuUtilizationLast10SecondsState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 10 second CPU usage state."
	::= { wwpLeosSystemCpuUtilization 8 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.9
	wwpLeosSystemCpuUtilizationLast60Seconds OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 60 second CPU usage state."
	::= { wwpLeosSystemCpuUtilization 9 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.10
	wwpLeosSystemCpuUtilizationLast60SecondsMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum 60 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 10 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.11
	wwpLeosSystemCpuUtilizationLast60SecondsMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Maximum 60 second CPU usage measurement."
	::= { wwpLeosSystemCpuUtilization 11 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.11.12
	wwpLeosSystemCpuUtilizationLast60SecondsState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The 60 second CPU state."
	::= { wwpLeosSystemCpuUtilization 12 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12
	wwpLeosSystemFileSystemUtilization OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 12 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.1
	wwpLeosSystemFileSystemUtilizationTmpfsCurrent OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current percentage usage of the /tmp/ directory in the filesystem."
	::= { wwpLeosSystemFileSystemUtilization 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.2
	wwpLeosSystemFileSystemUtilizationTmpfsMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum percentage usage of the /tmp/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.3
	wwpLeosSystemFileSystemUtilizationTmpfsMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Maximum percentage usage of the /tmp/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.4
	wwpLeosSystemFileSystemUtilizationTmpfsState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current state of the /tmp/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.5
	wwpLeosSystemFileSystemUtilizationSysfsCurrent OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current percentage usage of the /mnt/sysfs/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.6
	wwpLeosSystemFileSystemUtilizationSysfsMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum percentage usage of the /mnt/sysfs/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.7
	wwpLeosSystemFileSystemUtilizationSysfsMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Maximum percentage usage of the /mnt/sysfs/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.8
	wwpLeosSystemFileSystemUtilizationSysfsState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current state of the /mnt/sysfs/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 8 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.9
	wwpLeosSystemFileSystemUtilizationXftpCurrent OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current percentage usage of the /mnt/xftp/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 9 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.10
	wwpLeosSystemFileSystemUtilizationXftpMinimum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum percentage usage of the /mnt/xftp/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 10 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.11
	wwpLeosSystemFileSystemUtilizationXftpMaximum OBJECT-TYPE
		SYNTAX Integer32 (1..100)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Maximum percentage usage of the /mnt/xftp/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 11 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.12.12
	wwpLeosSystemFileSystemUtilizationXftpState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current state of the /mnt/xftp/ directory in the file system."
	::= { wwpLeosSystemFileSystemUtilization 12 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13
	wwpLeosSystemMemoryUtilization OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 13 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13.1
	wwpLeosSystemMemoryUtilizationUsedMemoryCurrent OBJECT-TYPE
		SYNTAX Gauge32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current number of used memory in bytes."
	::= { wwpLeosSystemMemoryUtilization 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13.2
	wwpLeosSystemMemoryUtilizationUsedMemoryMinimum OBJECT-TYPE
		SYNTAX Gauge32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum number of used memory in bytes."
	::= { wwpLeosSystemMemoryUtilization 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13.3
	wwpLeosSystemMemoryUtilizationUsedMemoryMaximum OBJECT-TYPE
		SYNTAX Gauge32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Maximum number of used memory in bytes."
	::= { wwpLeosSystemMemoryUtilization 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13.4
	wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent OBJECT-TYPE
		SYNTAX Gauge32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current number of available memory in bytes."
	::= { wwpLeosSystemMemoryUtilization 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13.5
	wwpLeosSystemMemoryUtilizationAvailableMemoryMinimum OBJECT-TYPE
		SYNTAX Gauge32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Minimum number of available memory in bytes."
	::= { wwpLeosSystemMemoryUtilization 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13.6
	wwpLeosSystemMemoryUtilizationAvailableMemoryMaximum OBJECT-TYPE
		SYNTAX Gauge32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Maximum number of available memory in bytes."
	::= { wwpLeosSystemMemoryUtilization 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.13.7
	wwpLeosSystemMemoryUtilizationAvailableMemoryState OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			warning(2),
			degraded(3),
			faulted(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Current state of the available memory."
	::= { wwpLeosSystemMemoryUtilization 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.14
	wwpLeosSystemGuardian OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 14 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.14.1
	wwpLeosSystemGuardianAdminEnable OBJECT-TYPE
		SYNTAX INTEGER
		{
			enable(1),
			disable(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the admin state for the system guardian. A reboot is required for 
			changes to take effect"
	::= { wwpLeosSystemGuardian 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.14.2
	wwpLeosSystemGuardianOperEnable OBJECT-TYPE
		SYNTAX INTEGER
		{
			enable(1),
			disable(2),
			suspended(3)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Displays the current guardian operational state."
	::= { wwpLeosSystemGuardian 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.14.3
	wwpLeosSystemGuardianLimitNumReboots OBJECT-TYPE
		SYNTAX INTEGER
		{
			on(1),
			off(2)
		}
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Limits the number of consecutive guardian reboots to 3 if set to on."
	::= { wwpLeosSystemGuardian 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.14.4
	wwpLeosSystemGuardianConsecutiveReboots OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The current number of consecutive guardian reboots."
	::= { wwpLeosSystemGuardian 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.14.5
	wwpLeosSystemGuardianTotalReboots OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The total number of guardian reboots."
	::= { wwpLeosSystemGuardian 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.15
	wwpLeosSystemServers OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 15 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.15.1
	wwpLeosSystemSftpServerAdminState OBJECT-TYPE
		SYNTAX SystemServerAdminState
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the administrative state for the SFTP server."
	::= { wwpLeosSystemServers 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.15.2
	wwpLeosSystemFtpServerAdminState OBJECT-TYPE
		SYNTAX SystemServerAdminState
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the administrative state for the FTP server."
	::= { wwpLeosSystemServers 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.15.3
	wwpLeosSystemTftpServerAdminState OBJECT-TYPE
		SYNTAX SystemServerAdminState
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the administrative state for the TFTP server."
	::= { wwpLeosSystemServers 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.15.4
	wwpLeosSystemScpServerAdminState OBJECT-TYPE
		SYNTAX SystemServerAdminState
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the administrative state for the SCP server."
	::= { wwpLeosSystemServers 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.16
	wwpLeosSystemClients OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 16 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.16.2
	wwpLeosSystemFtpClientAdminState OBJECT-TYPE
		SYNTAX SystemClientAdminState
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the administrative state for the FTP client."
	::= { wwpLeosSystemClients 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.1.16.3
	wwpLeosSystemTftpClientAdminState OBJECT-TYPE
		SYNTAX SystemClientAdminState
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"Sets the administrative state for the TFTP client."
	::= { wwpLeosSystemClients 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.2
	wwpLeosSystemConfigMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIB 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0
	wwpLeosSystemConfigMIBNotifications OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBNotificationPrefix 0 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.1
	wwpLeosImproperCmdInConfigFile NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemConfigFileName, wwpLeosSystemConfigErrLineNum, 
		wwpLeosSystemConfigErrLinesTotal } 
		STATUS current
		DESCRIPTION
			"A wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity, acting in
			an agent role, has counted the number of improper commands that were found in the
			configuration file while processing the wwpLeosSystemConfigFileName"
	::= { wwpLeosSystemConfigMIBNotifications 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.2
	wwpLeosSystemServiceModeChange NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemServiceMode } 
		STATUS current
		DESCRIPTION
			"A wwpLeosSystemServiceModeChange notification is sent whenever someone changes the system service mode 
			between mpls and pbt."
	::= { wwpLeosSystemConfigMIBNotifications 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.3
	wwpLeosSystemMemoryStatusNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemMemoryUsageMemoryTotal, 
		wwpLeosSystemMemoryUsageMemoryFree, wwpLeosSystemMemoryUsageStatus, 
		wwpLeosSystemMemoryUsageMemoryAvailable } 
		STATUS current
		DESCRIPTION
			"A wwpLeosSystemMemoryStatusNotification notification is sent whenever the system memory is
			below threshold limit."
	::= { wwpLeosSystemConfigMIBNotifications 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.4
	wwpLeosImproperCmdInConfigLineString NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemConfigErrStr, wwpLeosSystemConfigErrLineNum, 
		wwpLeosSystemConfigFileName } 
		STATUS current
		DESCRIPTION
			"A wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP entity, acting in
			an agent role, has detected that improper commands were found in the
			configuration file while processing the wwpLeosSystemConfigFileName. 
			wwpLeosSystemConfigErrStr will specify the commands which failed with the line number."
	::= { wwpLeosSystemConfigMIBNotifications 4 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.5
	wwpLeosSystemCpuUtilization5SecondStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemCpuUtilizationLast5Seconds, 
		wwpLeosSystemCpuUtilizationLast5SecondsState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 5 second CPU utilization changes states."
	::= { wwpLeosSystemConfigMIBNotifications 5 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.6
	wwpLeosSystemCpuUtilization10SecondStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemCpuUtilizationLast10Seconds, 
		wwpLeosSystemCpuUtilizationLast10SecondsState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemCpuUtilization10SecondStatusTrap is sent when the 10 second CPU utilization changes states."
	::= { wwpLeosSystemConfigMIBNotifications 6 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.7
	wwpLeosSystemCpuUtilization60SecondStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemCpuUtilizationLast60Seconds, 
		wwpLeosSystemCpuUtilizationLast60SecondsState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 60 second CPU utilization changes states."
	::= { wwpLeosSystemConfigMIBNotifications 7 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.8
	wwpLeosSystemCpu1MinLoadStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemCpuLoad1Min, wwpLeosSystemCpuLoad1MinState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over one minute changes states."
	::= { wwpLeosSystemConfigMIBNotifications 8 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.9
	wwpLeosSystemCpu5MinLoadStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemCpuLoad5Min, wwpLeosSystemCpuLoad5MinState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over five minutes changes states."
	::= { wwpLeosSystemConfigMIBNotifications 9 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.10
	wwpLeosSystemCpu15MinLoadStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemCpuLoad15Min, wwpLeosSystemCpuLoad15MinState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over fifteen minutes changes states."
	::= { wwpLeosSystemConfigMIBNotifications 10 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.11
	wwpLeosSystemMemoryUtilizationStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent, 
		wwpLeosSystemMemoryUtilizationAvailableMemoryState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemMemoryUtilizationStatusTrap is sent when the memory utilization changes states."
	::= { wwpLeosSystemConfigMIBNotifications 11 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.12
	wwpLeosSystemFileSystemUtilizationTmpStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemFileSystemUtilizationTmpfsCurrent, 
		wwpLeosSystemFileSystemUtilizationTmpfsState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent when the usage of '/tmp/' changes states."
	::= { wwpLeosSystemConfigMIBNotifications 12 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.13
	wwpLeosSystemFileSystemUtilizationSysfsStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemFileSystemUtilizationSysfsCurrent, 
		wwpLeosSystemFileSystemUtilizationSysfsState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent when the usage of '/mnt/sysfs/' changes states."
	::= { wwpLeosSystemConfigMIBNotifications 13 }

	-- 1.3.6.1.4.1.6141.2.60.12.2.0.14
	wwpLeosSystemFileSystemUtilizationXftpStatusTrap NOTIFICATION-TYPE
		OBJECTS { wwpLeosSystemFileSystemUtilizationXftpCurrent, 
		wwpLeosSystemFileSystemUtilizationXftpState } 
		STATUS current
		DESCRIPTION
			"The wwpLeosSystemFileSystemUtilizationXftpStatusTrap is sent when the usage of '/mnt/xftp/' changes states."
	::= { wwpLeosSystemConfigMIBNotifications 14 }

	-- 1.3.6.1.4.1.6141.2.60.12.3
	wwpLeosSystemConfigMIBConformance OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIB 3 }

	-- 1.3.6.1.4.1.6141.2.60.12.3.1
	wwpLeosSystemConfigCompliances OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBConformance 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.3.1.1
	wwpLeosDefaultGatewayCompliance MODULE-COMPLIANCE
		STATUS current
		DESCRIPTION
			"The compliance statement of wwpLeosSystemConfigAttr."
		MODULE -- this module
			GROUP wwpLeosDefaultGatewayIPv6Group
				DESCRIPTION
					"This group is mandatory when IPv6 addresses are supported."
			OBJECT wwpLeosSystemConfigDefaultGatewayInetAddrType
				SYNTAX InetAddressType
					{
					ipv4(1),
					ipv6(2)
					}
				DESCRIPTION
					"An implementation is only required to support IPv4
					and IPv6 addresses without zone indices."

	::= { wwpLeosSystemConfigCompliances 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.3.1.2
	wwpLeosBackupGatewayCompliance MODULE-COMPLIANCE
		STATUS current
		DESCRIPTION
			"The compliance statement of wwpLeosSystemConfigAttr."
		MODULE -- this module
			GROUP wwpLeosBackupGatewayIPv6Group
				DESCRIPTION
					"This group is mandatory when IPv6 addresses are supported."
			OBJECT wwpLeosSystemConfigBackupGatewayInetAddrType
				SYNTAX InetAddressType
					{
					ipv4(1),
					ipv6(2)
					}
				DESCRIPTION
					"An implementation is only required to support IPv4
					and IPv6 addresses without zone indices."

	::= { wwpLeosSystemConfigCompliances 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.3.2
	wwpLeosSystemConfigMIBGroups OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBConformance 2 }

	-- 1.3.6.1.4.1.6141.2.60.12.3.2.1
	wwpLeosDefaultGatewayIPv6Group OBJECT-GROUP
		OBJECTS { wwpLeosSystemConfigDefaultGatewayInetAddrType, 
		wwpLeosSystemConfigDefaultGatewayInetAddress } 
		STATUS current
		DESCRIPTION
			"System config default gateway objects for supporting IPv6."
	::= { wwpLeosSystemConfigMIBGroups 1 }

	-- 1.3.6.1.4.1.6141.2.60.12.3.2.2
	wwpLeosBackupGatewayIPv6Group OBJECT-GROUP
		OBJECTS { wwpLeosSystemConfigBackupGatewayInetAddrType, 
		wwpLeosSystemConfigBackupGatewayInetAddress } 
		STATUS current
		DESCRIPTION
			"System config backup gateway objects for supporting IPv6."
	::= { wwpLeosSystemConfigMIBGroups 2 }

END