path: root/MIBS/cisco/CERENT-MSDWDM-MIB

-- *****************************************************************
-- CERENT-MSDWDM-MIB.mib  
-- Multi Service DWDM MIB
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CERENT-MSDWDM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    Integer32,
    Counter32,
    Unsigned32,
    Counter64,
    MODULE-IDENTITY,
    OBJECT-TYPE                         FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    TruthValue                          FROM SNMPv2-TC
    MODULE-COMPLIANCE,
    OBJECT-GROUP                        FROM SNMPv2-CONF
    ifIndex                             FROM IF-MIB
    cerentModules,
    cerentRequirements,
    cerentGeneric                       FROM CERENT-GLOBAL-REGISTRY
    CerentPeriod                        FROM CERENT-TC
;

cerentMsDwdmMIB MODULE-IDENTITY
    LAST-UPDATED    "0302150000Z" -- 2003/Feb/15
    ORGANIZATION   "Cisco Systems, Inc."
    CONTACT-INFO   "support@Cisco.com

                    Postal:
                    Cisco Systems
                    1450 N. McDowell Blvd.
                    Petaluma, CA 94954

                    Tel: +1-877-323-7368"
    DESCRIPTION
        "This MIB module defines the managed objects for physical  
        layer related interface configurations and objects
        for the protocol specific error counters for DWDM
        optical switches.

        This MIB contains four groups.
  
        The first group, cerentMsDwdmIfGroup, handles the physical
        layer related interface configurations.
         
        The second group, cerentMsDwdmOtnGroup, provides
        objects for configuring OTN (G.709) related thresholds and for
        collecting OTN (G.709) related performance statistics for the
        current and previous 15 min and 24 hour intervals.

        The third group, cerentMsDwdmFECGroup provides objects for 
        monitoring FEC (Fault Error Correction) statistics for the 
        current and previous 15 min and 24 hour intervals.  
        It also contains objects for configuring FEC error thresholds.
        
        The fourth group,cerentMsDwdm8B10BGroup contains 8B10B
        counters, for the current and previous 15 min and 24 hour
        intervals for interfaces like Fiber Channel/Gig E."
        
    REVISION   "0302150000Z" -- 2003/Feb/15 
    DESCRIPTION
        "Added DWDM Network Tables, 8B10B tables."
        
    REVISION   "0211110000Z" -- 2002/Nov/11  
    DESCRIPTION
        "The initial revision of this MIB."
        
    ::= { cerentModules 80 }  


-- Textual Conventions

ProtocolType ::= TEXTUAL-CONVENTION
    STATUS   current
    DESCRIPTION
        "An integer value that identifies the protocol used across an
        interface."
    SYNTAX   INTEGER {
        other(1),
        unknown(2),
        tenGigEth(4),
        fibreChOrOneGigEth(5),
        unframed(7),
        sonet(8),
        sdh(9),
        sysplexIscCompatibility(10),
        sysplexIscPeer(11),
        sysplexTimerEtr(12),
        sysplexTimerClo(13),
        fastEthernet(14),
        fddi(15),
		eightGfc(16),
		oc768(17),
		otn(18)
		
    }

IntervalType ::= TEXTUAL-CONVENTION
    STATUS   current
    DESCRIPTION
        "This value indicates the time period over which performance 
        monitoring data has been collected. Valid values are -

        fifteenMin (1)   :  values for the 15 min interval.
        oneDay  (2)      :  values for the 1  Day interval.
        "
    SYNTAX   INTEGER {
        fifteenMin(1),
        oneDay(2)
    }

LocationAndIntervalType ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the time period and the location 
        for which the performace monitoring data has been collected.
        Valid values are -

        nearEnd15Min  (1)   : nearEnd values for the 15 min interval.
        nearEndOneDay (2)   : nearEnd values for the 1  Day interval.
        farEnd15Min   (3)   : farEnd values for the 15 min interval.
        farEndOneDay  (4)   : farEnd values for the 1  day interval.
        "
    SYNTAX   INTEGER {
        nearEnd15Min(1),
        nearEndOneDay(2),
        farEnd15Min(3),
        farEndOneDay(4)
    }

MonitorType ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the type of performance statistics  
        being monitored. Valid values are -

        path(1)    : Performance statistics for path    parameters.
        section(2) : Performance statistics for section parameters.
        tcm1(3)    : Performance statistics for tandem connection
                     monitoring 1.
        tcm2(4)    : Performance statistics for tandem connection 
                     monitoring 2.
        "
    SYNTAX    INTEGER {
        path(1),
        section(2),
        tcm1(3),
        tcm2(4)
    }

RingDirection ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the type of directionality in the
        ring. The directionality is meaning the facing side of
        the port that is connected to fiber.
        Valid values are -
        
        westEast(1) : the port is facing to west side, continuing
              to east side
        eastWest(2) : the port is facing to east side, continuing
              to west side
        "
    SYNTAX    INTEGER {
        westEast(1),
        eastWest(2)
    }

SideIdentifier ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the side in the ring/mesh node
        e.g. the facing side associated to on optical interface
        within an up to 8 deg mesh node.
        Valid values are -
        
        unknownSide(0)
        sideA(1)
        sideB(2)
        sideC(3)
        sideD(4)
        sideE(5)
        sideF(6)
        sideG(7)
        sideH(8)
        sideI(9)
        sideJ(10)
        sideK(11)
        sideL(12)
        sideM(13)
        sideN(14)
        sideO(15)
        sideP(16)
        sideQ(17)
        sideR(18)
        sideS(19)
        sideT(20)
        "
    SYNTAX    INTEGER {
        unknownSide(0),
        sideA(1),
        sideB(2),
        sideC(3),
        sideD(4),
        sideE(5),
        sideF(6),
        sideG(7),
        sideH(8),
        sideI(9),
        sideJ(10),
        sideK(11),
        sideL(12),
        sideM(13),
        sideN(14),
        sideO(15),
        sideP(16),
        sideQ(17),
        sideR(18),
        sideS(19),
        sideT(20)
    }

OpticalPortRule ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the rule that assumes the optical port.
        Valid values are -

        inputLine(1)    : this is an input LINE port
        outputLine(2)    : this is an output LINE port
        inputCom(3)    : this is an input COM port
        outputCom(4)    : this is an output COM port
        inputOsc(5)    : this is an input OSC port
        outputOsc(6)    : this is an output OSC port
        inputDc(7)    : this is an input DCU port
        outputDc(8)    : this is an output DCU port
        inputExpress(9)     : this is an input EXPress port
        outputExpress(10)   : this is an output EXPress port
        add(11)     : this is an band/wavelength ADD port
        drop(12)    : this is an band/wavelength DROP port
        inputPassThru(13)   : this is an input Pass Thru port
     	inputWorking(14)    : the working port that receive the signal in an optical protection unit
	outputWorking(15)   : the working port that send the signal in an optical protection unit
	inputProtected(16)  : the protected port that receive the signal in an optical protection unit
	outputProtected(17) : the protected port that send the signal in an optical protection unit
	inputRaman(18)      : this is an input RAMAN port
	outputRaman(19)     : this is an output RAMAN port
	com(20)     : this is an COM port
	ead(21)     : this is an Express/Add/Drop port
	ad(22)     : this is an Add/Drop port
        "
    SYNTAX    INTEGER {
        inputLine(1),
        outputLine(2),
        inputCom(3),
        outputCom(4),
        inputOsc(5),
        outputOsc(6),
        inputDc(7),
        outputDc(8),
        inputExpress(9),
        outputExpress(10),
        add(11),
        drop(12),
	inputPassThru(13),
     	inputWorking(14),
	outputWorking(15),
	inputProtected(16),
	outputProtected(17),
        inputRaman(18),
        outputRaman(19),
	com(20),
	ead(21),
	ad(22)
    }

LaserStatus ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the working status of the laser.
        Valid values are -

        on(1) : laser is working
        off(2) : laser is switched off
        apr(3) : laser is working in automatic power reduction
        none(4) : laser is not present
        "
    SYNTAX    INTEGER {
        on(1),
        off(2),
        apr(3),
        none(4)
    }

OpticalAmplifierMode ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the amplifier working mode
        Valid values are -

        gain(1)  : gain control mode
        power(2) : power control mode
        none(3)  : not an amplifier port
        fixed-gain(4)  : fixed gain control mode
        "
    SYNTAX    INTEGER {
        gain(1),
        power(2),
        none(3),
        fixed-gain(4)
    }

OpticalBand ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the the wavelength group (band)
        The following wave lengths group are supported:
        bn1530d33To1532d68 : are the wavelengths from 1530.33 nm to 1532.68 nm.
        bn1534d25To1536d61 : are the wavelengths from 1534.25 nm to 1536.61 nm.
        bn1538d19To1540d56 : are the wavelengths from 1538.19 nm to 1540.56 nm. 
        bn1542d14To1544d53 : are the wavelengths from 1542.14 nm to 1544.53 nm. 
        bn1546d12To1548d51 : are the wavelengths from 1546.12 nm to 1548.51 nm.
        bn1550d12To1552d52 : are the wavelengths from 1550.12 nm to 1552.52 nm.
        bn1554d13To1556d55 : are the wavelengths from 1554.13 nm to 1556.55 nm.
        bn1558d17To1560d61 : are the wavelengths from 1558.17 nm to 1560.61 nm.
        "
    SYNTAX    INTEGER {
        unknown(1),
        bn1530d33To1532d68(5),
        bn1534d25To1536d61(25),
        bn1538d19To1540d56(45), 
        bn1542d14To1544d53(65), 
        bn1546d12To1548d51(85),
        bn1550d12To1552d52(105),
        bn1554d13To1556d55(125),
        bn1558d17To1560d61(145)
    }

OpticalWavelength ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This object allows the management client to configure
         the wavelength mode of operation to the applicable interfaces.
         The following wave lengths are supported:
         wv1529d55 is 1529.55 nm
         wv1529d94 is 1529.94 nm
         wv1530d33 is 1530.33 nm
         wv1530d72 is 1530.72 nm
         wv1531d12 is 1531.12 nm
         wv1531d51 is 1531.51 nm
         wv1531d90 is 1531.90 nm
         wv1532d29 is 1532.29 nm
         wv1532d68 is 1532.68 nm
         wv1533d07 is 1533.07 nm
         wv1533d47 is 1533.47 nm
         wv1533d86 is 1533.86 nm
         wv1534d25 is 1534.25 nm
         wv1534d64 is 1534.64 nm
         wv1535d04 is 1535.04 nm
         wv1535d43 is 1535.43 nm
         wv1535d82 is 1535.82 nm
         wv1536d22 is 1536.22 nm
         wv1536d61 is 1536.61 nm
         wv1537d00 is 1537.00 nm
         wv1537d40 is 1537.40 nm
         wv1537d79 is 1537.79 nm
         wv1538d19 is 1538.19 nm
         wv1538d58 is 1538.58 nm
         wv1538d98 is 1538.98 nm
         wv1539d37 is 1539.37 nm
         wv1539d77 is 1539.77 nm
         wv1540d16 is 1540.16 nm
         wv1540d56 is 1540.56 nm
         wv1540d95 is 1540.95 nm
         wv1541d35 is 1541.35 nm
         wv1541d75 is 1541.75 nm
         wv1542d14 is 1542.14 nm
         wv1542d54 is 1542.54 nm
         wv1542d94 is 1542.94 nm
         wv1543d33 is 1543.33 nm
         wv1543d73 is 1543.73 nm
         wv1544d13 is 1544.13 nm
         wv1544d53 is 1544.53 nm
         wv1544d92 is 1544.92 nm
         wv1545d32 is 1545.32 nm
         wv1545d72 is 1545.72 nm
         wv1546d12 is 1546.12 nm
         wv1546d52 is 1546.52 nm
         wv1546d92 is 1546.92 nm
         wv1547d32 is 1547.32 nm
         wv1547d72 is 1547.72 nm
         wv1548d11 is 1548.11 nm
         wv1548d51 is 1548.51 nm
         wv1548d91 is 1548.91 nm
         wv1549d32 is 1549.32 nm
         wv1549d72 is 1549.72 nm
         wv1550d12 is 1550.12 nm
         wv1550d52 is 1550.52 nm
         wv1550d92 is 1550.92 nm
         wv1551d32 is 1551.32 nm
         wv1551d72 is 1551.72 nm
         wv1552d12 is 1552.12 nm
         wv1552d52 is 1552.52 nm
         wv1552d93 is 1552.93 nm
         wv1553d33 is 1553.33 nm
         wv1553d73 is 1553.73 nm
         wv1554d13 is 1554.13 nm
         wv1554d54 is 1554.54 nm
         wv1554d94 is 1554.94 nm
         wv1555d34 is 1555.34 nm
         wv1555d75 is 1555.75 nm
         wv1556d15 is 1556.15 nm
         wv1556d55 is 1556.55 nm
         wv1556d96 is 1556.96 nm
         wv1557d36 is 1557.36 nm
         wv1557d77 is 1557.77 nm
         wv1558d17 is 1558.17 nm
         wv1558d58 is 1558.58 nm
         wv1558d98 is 1558.98 nm
         wv1559d39 is 1559.39 nm
         wv1559d79 is 1559.79 nm
         wv1560d20 is 1560.20 nm
         wv1560d61 is 1560.61 nm
         wv1561d01 is 1561.01 nm
         wv1561d42 is 1561.42 nm
         wv1561d83 is 1561.83 nm
  -- L Band
         wv1570d83 is 1570.83 nm
         wv1571d24 is 1571.24 nm
         wv1571d65 is 1571.65 nm
         wv1572d06 is 1572.06 nm
         wv1572d48 is 1572.48 nm
         wv1572d89 is 1572.89 nm
         wv1573d30 is 1573.30 nm
         wv1573d71 is 1573.71 nm
         wv1574d13 is 1574.13 nm
         wv1574d54 is 1574.54 nm
         wv1574d95 is 1574.95 nm
         wv1575d37 is 1575.37 nm
         wv1575d78 is 1575.78 nm
         wv1576d20 is 1576.20 nm
         wv1576d61 is 1576.61 nm
         wv1577d03 is 1577.03 nm
         wv1577d44 is 1577.44 nm
         wv1577d86 is 1577.86 nm
         wv1578d27 is 1578.27 nm
         wv1578d69 is 1578.69 nm
         wv1579d10 is 1579.10 nm
         wv1579d52 is 1579.52 nm
         wv1579d93 is 1579.93 nm
         wv1580d35 is 1580.35 nm
         wv1580d77 is 1580.77 nm
         wv1581d18 is 1581.18 nm
         wv1581d60 is 1581.60 nm
         wv1582d02 is 1582.02 nm
         wv1582d44 is 1582.44 nm
         wv1582d85 is 1582.85 nm
         wv1583d27 is 1583.27 nm
         wv1583d69 is 1583.69 nm
         wv1584d11 is 1584.11 nm
         wv1584d53 is 1584.53 nm
         wv1584d95 is 1584.95 nm
         wv1585d36 is 1585.36 nm
         wv1585d78 is 1585.78 nm
         wv1586d20 is 1586.20 nm
         wv1586d62 is 1586.62 nm
         wv1587d04 is 1587.04 nm
         wv1587d46 is 1587.46 nm
         wv1587d88 is 1587.88 nm
         wv1588d30 is 1588.30 nm
         wv1588d73 is 1588.73 nm
         wv1589d15 is 1589.15 nm
         wv1589d57 is 1589.57 nm
         wv1589d99 is 1589.99 nm
         wv1590d41 is 1590.41 nm
         wv1590d83 is 1590.83 nm
         wv1591d26 is 1591.26 nm
         wv1591d68 is 1591.68 nm
         wv1592d10 is 1592.10 nm
         wv1592d52 is 1592.52 nm
         wv1592d95 is 1592.95 nm
         wv1593d37 is 1593.37 nm
         wv1593d79 is 1593.79 nm
         wv1594d22 is 1594.22 nm
         wv1594d64 is 1594.64 nm
         wv1595d06 is 1595.06 nm
         wv1595d49 is 1595.49 nm
         wv1595d91 is 1595.91 nm
         wv1596d34 is 1596.34 nm
         wv1596d76 is 1596.76 nm
         wv1597d19 is 1597.19 nm
         wv1597d62 is 1597.62 nm
         wv1598d04 is 1598.04 nm
         wv1598d47 is 1598.47 nm
         wv1598d89 is 1598.89 nm
         wv1599d32 is 1599.32 nm
         wv1599d75 is 1599.75 nm
         wv1600d17 is 1600.17 nm
         wv1600d60 is 1600.60 nm
         wv1601d03 is 1601.03 nm
         wv1601d46 is 1601.46 nm
         wv1601d88 is 1601.88 nm
         wv1602d31 is 1602.31 nm
         wv1602d74 is 1602.74 nm
         wv1603d17 is 1603.17 nm
         wv1603d60 is 1603.60 nm
         wv1604d03 is 1604.03 nm
        "
    SYNTAX    INTEGER {
        unknown(1),
 wv1529d55(3),
 wv1529d94(4),
        wv1530d33(5),
 wv1530d72(7),
        wv1531d12(10),
 wv1531d51(12),
        wv1531d90(15),
 wv1532d29(17),
        wv1532d68(20),
 wv1533d07(22),
 wv1533d47(23),
 wv1533d86(24),
        wv1534d25(25),
 wv1534d64(27),
        wv1535d04(30),
 wv1535d43(32),
        wv1535d82(35),
 wv1536d22(37),
        wv1536d61(40),
 wv1537d00(42),
 wv1537d40(43),
 wv1537d79(44),
        wv1538d19(45),
 wv1538d58(47),
        wv1538d98(50),
 wv1539d37(52),
        wv1539d77(55),
 wv1540d16(57),
        wv1540d56(60),
 wv1540d95(62),
 wv1541d35(63),
 wv1541d75(64),
        wv1542d14(65),
		wv1470(66),
 wv1542d54(67),
 wv1510(68),
 wv1590(69),
        wv1542d94(70),
		wv850(71),
 wv1543d33(72),
 wv1310(73),
 wv1550(74),
        wv1543d73(75),
		wv1490(76),
 wv1544d13(77),
 wv1530(78),
 wv1570(79),
        wv1544d53(80),
		wv1610(81),
 wv1544d92(82),
 wv1545d32(83),
 wv1545d72(84),
        wv1546d12(85),
 wv1546d52(87),
        wv1546d92(90),
 wv1547d32(92),
        wv1547d72(95),
 wv1548d11(97),
        wv1548d51(100),
 wv1548d91(102),
 wv1549d32(103),
 wv1549d72(104),
        wv1550d12(105),
        wv1550d52(107),
        wv1550d92(110),
        wv1551d32(112),
        wv1551d72(115),
        wv1552d12(117),
        wv1552d52(120),
        wv1552d93(122),
        wv1553d33(123),
        wv1553d73(124),
        wv1554d13(125),
        wv1554d54(127),
        wv1554d94(130),
        wv1555d34(132),
        wv1555d75(135),
        wv1556d15(137),
        wv1556d55(140),
        wv1556d96(142),
        wv1557d36(143),
        wv1557d77(144),
        wv1558d17(145),
        wv1558d58(147),
        wv1558d98(150),
        wv1559d39(152),
        wv1559d79(155),
        wv1560d20(157),
        wv1560d61(160),
        wv1561d01(162),
        wv1561d42(164),
        wv1561d83(166),
	-- L Band
        wv1570d83(168),
        wv1571d24(170),
        wv1571d65(172),
        wv1572d06(174),
        wv1572d48(176),
        wv1572d89(178),
        wv1573d30(180),
        wv1573d71(182),
        wv1574d13(184),
        wv1574d54(186),
        wv1574d95(188),
        wv1575d37(190),
        wv1575d78(192),
        wv1576d20(194),
        wv1576d61(196),
        wv1577d03(198),
        wv1577d44(200),
        wv1577d86(205),
        wv1578d27(210),
        wv1578d69(215),
        wv1579d10(220),
        wv1579d52(225),
        wv1579d93(230),
        wv1580d35(235),
        wv1580d77(240),
        wv1581d18(245),
        wv1581d60(250),
        wv1582d02(255),
        wv1582d44(260),
        wv1582d85(265),
        wv1583d27(270),
        wv1583d69(275),
        wv1584d11(280),
        wv1584d53(285),
        wv1584d95(290),
        wv1585d36(295),
        wv1585d78(300),
        wv1586d20(305),
        wv1586d62(310),
        wv1587d04(315),
        wv1587d46(320),
        wv1587d88(325),
        wv1588d30(330),
        wv1588d73(335),
        wv1589d15(340),
        wv1589d57(345),
        wv1589d99(350),
        wv1590d41(355),
        wv1590d83(360),
        wv1591d26(365),
        wv1591d68(370),
        wv1592d10(375),
        wv1592d52(380),
        wv1592d95(385),
        wv1593d37(390),
        wv1593d79(395),
        wv1594d22(400),
        wv1594d64(405),
        wv1595d06(410),
        wv1595d49(415),
        wv1595d91(420),
        wv1596d34(425),
        wv1596d76(430),
        wv1597d19(435),
        wv1597d62(440),
        wv1598d04(445),
        wv1598d47(450),
        wv1598d89(455),
        wv1599d32(460),
        wv1599d75(465),
        wv1600d17(470),
        wv1600d60(475),
        wv1601d03(480),
        wv1601d46(485),
        wv1601d88(490),
        wv1602d31(500),
        wv1602d74(505),
        wv1603d17(510),
        wv1603d60(515),
        wv1604d03(520),
		firsttunablewv(530),
		wv1528d77(540)
    }

OpticalPowerInDbm ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "An integer value that gives the optical power level in 1/10ths
        of dBm.
        Example: The value -300 represents a power level of -30.0 dBm.

        The distinguished value of '-1000' indicates that the object
        has not yet been initialized.
        "
    SYNTAX    Integer32 ( -400..250 | -1000 )


OpticalAttenInDb ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "An integer value that gives the attenuation level in
        1/10ths of dB. 
        Example: The value 80 represents an attenuation
        level of 8.0 dB.
        "
    SYNTAX    Integer32 (0..400)


TDCUCompensation ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
	"Enumeration of the possible fine TDCU compensation values
     	0 ps/nm
        -45 ps/nm
        -90 ps/nm
        -135 ps/nm
        -180 ps/nm
        -225 ps/nm
        -270 ps/nm
        -315 ps/nm
        -360 ps/nm
        -405 ps/nm
        -450 ps/nm
        -495 ps/nm
        -540 ps/nm
        -585 ps/nm
        -630 ps/nm
        -675 ps/nm

	Enumeration of the possible coarse TDCU compensation values
        0 ps/nm
        -110 ps/nm
        -220 ps/nm
        -330 ps/nm
        -440 ps/nm
        -550 ps/nm
        -660 ps/nm
        -770 ps/nm
        -880 ps/nm
        -990 ps/nm
        -1100 ps/nm
        -1210 ps/nm
        -1320 ps/nm
        -1430 ps/nm
        -1540 ps/nm
        -1650 ps/nm
	"
    SYNTAX    INTEGER {
	psnmNotApplicable(-1),
        psnm0(0),
        psnmFineMinus45(1),
        psnmFineMinus90(2),
        psnmFineMinus135(3),
        psnmFineMinus180(4),
        psnmFineMinus225(5),
        psnmFineMinus270(6),
        psnmFineMinus315(7),
        psnmFineMinus360(8),
        psnmFineMinus405(9),
        psnmFineMinus450(10),
        psnmFineMinus495(11),
        psnmFineMinus540(12),
        psnmFineMinus585(13),
        psnmFineMinus630(14),
        psnmFineMinus675(15),
        psnmCoarseMinus110(16),
        psnmCoarseMinus220(17),
        psnmCoarseMinus330(18),
        psnmCoarseMinus440(19),
        psnmCoarseMinus550(20),
        psnmCoarseMinus660(21),
        psnmCoarseMinus770(22),
        psnmCoarseMinus880(23),
        psnmCoarseMinus990(24),
        psnmCoarseMinus1100(25),
        psnmCoarseMinus1210(26),
        psnmCoarseMinus1320(27),
        psnmCoarseMinus1430(28),
        psnmCoarseMinus1540(29),
        psnmCoarseMinus1650(30)
    }


-- MIB Object Definitions

cerentMsDwdmMIBObjects    OBJECT IDENTIFIER ::= { cerentGeneric 40 }

-- groups in this MIB module

cerentMsDwdmIf                OBJECT IDENTIFIER  
                       ::= { cerentMsDwdmMIBObjects 1 }
cerentMsDwdmOtn               OBJECT IDENTIFIER  
                       ::= { cerentMsDwdmMIBObjects 2 }
cerentMsDwdmFEC               OBJECT IDENTIFIER  
                       ::= { cerentMsDwdmMIBObjects 3 }
cerentMsDwdm8B10B             OBJECT IDENTIFIER                       
                       ::= { cerentMsDwdmMIBObjects 4 }

-- cerentMsDwdmIf group

-- This group handles the physical layer related interface   
-- configurations, like the protocol and rate used across the client  
-- side interface, monitoring of counters,  and loopback mode   
-- across client and trunk side interfaces.  

cMsDwdmIfConfigTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmIfConfigEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table allows physical layer related interface
        configurations on an interface."
    ::= { cerentMsDwdmIf 1 }

cMsDwdmIfConfigEntry OBJECT-TYPE
    SYNTAX        CMsDwdmIfConfigEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A collection of objects for configuration on an
        interface."
    INDEX         { ifIndex }
    ::= { cMsDwdmIfConfigTable 1 }

CMsDwdmIfConfigEntry ::= SEQUENCE {
    cMsDwdmIfConfigProtocol               ProtocolType,
    cMsDwdmIfConfigDataRate               INTEGER,
    cMsDwdmIfConfigLoopback               INTEGER,
    cMsDwdmIfConfigWavelength             OpticalWavelength,
    cMsDwdmIfConfigOtnStatus              TruthValue,
    cMsDwdmIfConfigFECStatus              TruthValue,
    cMsDwdmIfOpticsValidIntervals         Unsigned32,
    cMsDwdmIfOTNValidIntervals            Unsigned32,
    cMsDwdmIfFECValidIntervals            Unsigned32,
    cMsDwdmIfConfigFECMode		  INTEGER
}

cMsDwdmIfConfigProtocol OBJECT-TYPE
    SYNTAX        ProtocolType
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the protocol of the data  
        carried over the interface.

        This object applies to linecards which support a variety of
        protocols and allow dynamic configuration of the specific
        protocol to be monitored on the interface. The ifType value
        for such interfaces remains fixed."
    ::= { cMsDwdmIfConfigEntry 1 }

cMsDwdmIfConfigDataRate OBJECT-TYPE
    SYNTAX        INTEGER {
                    passThru(10),
                    stm1(20),
                    stm4(30),
                    stm16(40),
                    stm64(50),
					stm256(55),
                    gigE(60),
                    tenGigE(70),
                    fc(80),
                    oneGfcFicon(90),
                    twoGfcFiconIsc3(100),
                    escon(110),
                    dv6000(120),
                    sdiD1Video(130),
                    hdtv(140),
                    oc3(150),
                    oc12(160),
                    oc48(170),
                    oc192(180),
		    fourGfcFicon(190),
		    tenGfc(200),
		    isc1(210),
		    isc3(220),
		    oneGigIsc3(230),
		    twoGigIsc3(240),
		    etrClo(250),
			infiniBand(280),
			fe(290),
			e1t1(300),
			e3t3(310),
			oc3Ge(320),
			eightGfc(330),
			oc768(340),
			otu1(350),
			otu2(360),
			otu3(370),
			otu4(380),
			oneHundredGe(390)			
    }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object allows the management client to set the
         data rate across the interface.

         passThru denotes 2R, Reamplification and reshaping.
         stm1     denotes 3R, Reamp, reshaping and reclocking.
         stm4     denotes 3R, Reamp, reshaping and reclocking.
         stm16    denotes 3R, Reamp, reshaping and reclocking.
         stm64    denotes 3R, Reamp, reshaping and reclocking.
         gigE     denotes 3R, Reamp, reshaping and reclocking.
         tenGigE  denotes 3R, Reamp, reshaping and reclocking.
         fc       denotes 3R, Reamp, reshaping and reclocking.
         oneGfcFicon denotes 3R, Reamp, reshaping and reclocking.
         twoGfcFiconIsc3 denotes 3R, Reamp, reshaping and reclocking.
         escon    denotes 2R, Reamp and reshaping.
         dv6000   denotes 2R, Reamp and reshaping.
         sdiD1Video denotes 2R, Reamp and reshaping.
         hdtv     denotes 2R, Reamp and reshaping.
         oc3      denotes 3R, Reamp, reshaping and reclocking.
         oc12     denotes 3R, Reamp, reshaping and reclocking.
         oc48     denotes 3R, Reamp, reshaping and reclocking.
         oc192    denotes 3R, Reamp, reshaping and reclocking.
		 infiniBand	denotes 3R, Reamp, reshaping and reclocking.
		 fe 	denotes 3R, Reamp, reshaping and reclocking.
		 e3t3	denotes 3R, Reamp, reshaping and reclocking.
		 oc3Ge	denotes 3R, Reamp, reshaping and reclocking.
         "
    ::= { cMsDwdmIfConfigEntry 2 }

cMsDwdmIfConfigLoopback OBJECT-TYPE
    SYNTAX        INTEGER {
                      noLoop(1),
                      diagnosticLoop(2),
                      lineLoop(3),
                      otherLoop(4)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object allows the management client to configure
        loopback for the client side or trunk side interfaces.
         
        'noLoop'         - No Loopback present.
        'diagnosticLoop' - This is an internal loopback, where the
                           data stream is looped from the transmit
                           to receive section. It is used for  
                           hardware debug, bring-up and diagnostics.
        'lineLoop'       - In this mode, the receive data stream is
                           looped back to the transmit side.
        'otherLoop'      - This indicates loopbacks not defined here.

        The default value of this object will be 'noLoop'."
    ::= { cMsDwdmIfConfigEntry 3 }

cMsDwdmIfConfigWavelength  OBJECT-TYPE
    SYNTAX        OpticalWavelength
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object allows the management client to configure
        the wavelength mode of operation to the applicable interfaces.
        "
    ::= { cMsDwdmIfConfigEntry 4 }
    
cMsDwdmIfConfigOtnStatus OBJECT-TYPE
    SYNTAX         TruthValue
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
        "This object allows the management client to enable  
        the OTN (G.709) on an applicable interface,by writing a  
        value of 'true' to this object. To bypass the monitoring 
        hardware, a value of 'false' is written to this object.

        This object is not applicable to client side interfaces."
	
    ::= { cMsDwdmIfConfigEntry 5 }

cMsDwdmIfConfigFECStatus OBJECT-TYPE
    SYNTAX         TruthValue
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
        "This object allows the management client to enable  
        gathering FEC ( Forward Error Correction ) counters on
        an applicable interface, by writing a value of 'true'  
        to this object.To disable FEC, a value of 'false'  
        must be written to this object.

        This object is not applicable to client side interfaces.
        
      	This object is being replaced by cMsDwdmIfConfigFECMode and is 
	      going to become	obsolete in the future releases."
     ::= { cMsDwdmIfConfigEntry 6 }    

cMsDwdmIfOpticsValidIntervals OBJECT-TYPE
    SYNTAX      Unsigned32 (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the number of contiguous 15 minute
        intervals for which valid Optical Monitor PM data is available 
        for the particular interface.

        The value of this object will be n (where n is the maximum
        number of 15 minute intervals supported at this interface), 
        unless the measurement was (re-)started within the last
        (nx15) minutes, in which case the value will be the
        number of 15 minute intervals for which the agent
        has some data."
    ::= { cMsDwdmIfConfigEntry 7 }

cMsDwdmIfOTNValidIntervals OBJECT-TYPE
    SYNTAX      Unsigned32 (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the number of contiguous 15 minute 
        intervals for which valid OTN performance monitoring data is 
        available for the particular interface.

        The value of this object will be n (where n is the maximum
        number of 15 minute intervals supported at this interface), 
        unless the measurement was (re-)started within the last
        (nx15) minutes, in which case the value will be the
        number of 15 minute intervals for which the agent
        has some data.
        
        This object reports a value 0, if OTN is turned off."
    ::= { cMsDwdmIfConfigEntry 8 }

cMsDwdmIfFECValidIntervals OBJECT-TYPE
    SYNTAX      Unsigned32 (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the number of contiguous 15 minute 
        intervals for which valid FEC PM data is available 
        for the particular interface.

        The value of this object will be n (where n is the maximum
        number of 15 minute intervals supported at this interface), 
        unless the measurement was (re-)started within the last
        (nx15) minutes, in which case the value will be the
        number of 15 minute intervals for which the agent
        has some data.
        
        This object reports a value 0, if FEC is turned off."
    ::= { cMsDwdmIfConfigEntry 9 }

cMsDwdmIfConfigFECMode OBJECT-TYPE
    SYNTAX         INTEGER {
                      disable(1),
                      enableStandard(2),
		      enableEnhanced(3),
		      enableEnhancedI4(4),
		      enableEnhancedI7(5),
		      enableEnhanced20(6),
                      enableHG7(7)
                  }
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
        "This object allows the management client to enable  
        gathering FEC ( Forward Error Correction ) counters on
        an applicable interface, by writing a value of 'enableStandard'  
        or 'enableEnhanced' to this object. To disable FEC, a value of 
	'disable' must be written to this object.

        This object is not applicable to client side interfaces."
     ::= { cMsDwdmIfConfigEntry 10 }    


-- DwdmIfTransport Table

cMsDwdmIfTransportTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmIfTransportEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table defines optical transport layer related interface
        configurations on an interface."
    ::= { cerentMsDwdmIf 2 }

cMsDwdmIfTransportEntry OBJECT-TYPE
    SYNTAX        CMsDwdmIfTransportEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A collection of objects for configuration on an
        optical transport interface."
    INDEX         { ifIndex }
    ::= { cMsDwdmIfTransportTable 1 }

CMsDwdmIfTransportEntry ::= SEQUENCE {
    cMsDwdmIfTransportRingDirection       RingDirection,
    cMsDwdmIfTransportPortRule            OpticalPortRule,
    cMsDwdmIfTransportPower               OpticalPowerInDbm,
    cMsDwdmIfTransportAddPower            OpticalPowerInDbm,
    cMsDwdmIfTransportOSCPower            OpticalPowerInDbm,
    cMsDwdmIfTransportReferencePower      OpticalPowerInDbm,
    cMsDwdmIfTransportCalibratedPower     OpticalPowerInDbm,
    cMsDwdmIfTransportInsertionLoss       OpticalAttenInDb,
    cMsDwdmIfTransportLaserStatus         LaserStatus,
    cMsDwdmIfTransportAmplifierMode       OpticalAmplifierMode,
    cMsDwdmIfTransportGain                OpticalAttenInDb,
    cMsDwdmIfTransportExpectedGain        OpticalAttenInDb,
    cMsDwdmIfTransportReferenceTilt       OpticalAttenInDb,
    cMsDwdmIfTransportCalibratedTilt      OpticalAttenInDb,
    cMsDwdmIfTransportDCULoss             OpticalAttenInDb,
    cMsDwdmIfTransportOSRI                INTEGER,
    cMsDwdmIfTransportSideIdentifier      SideIdentifier,
    cMsDwdmIfTransportTDCUCompensation    TDCUCompensation
}

cMsDwdmIfTransportRingDirection OBJECT-TYPE
    SYNTAX        RingDirection
    MAX-ACCESS    not-accessible
    STATUS        obsolete -- Unsupported on 15454 starting from rel. 8.0
    DESCRIPTION
        "This object is used to specify the ring directionality of
	the port.
	
	The ring directionality gives the configuration of the 
	facing side: facing sides can be east going to west and 
	west going to east."
    ::= { cMsDwdmIfTransportEntry 1 }

cMsDwdmIfTransportPortRule OBJECT-TYPE
    SYNTAX        OpticalPortRule
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the type of the optical
	port.
	
	A transport optical port can assume one of the following
	values:
		input(1)
		input-express(2)
		output(3)
		output-express(4)."
    ::= { cMsDwdmIfTransportEntry 2 }

cMsDwdmIfTransportPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical power read at
	the photodiode of the port.
	
	The distinguished value of '-1000' indicates that the power
	cannot be read due to unavaible HW resource."
    ::= { cMsDwdmIfTransportEntry 3 }

cMsDwdmIfTransportReferencePower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical transport
        reference power. This is the value of power the network 
        element will expect on the photodiode.
        In case the user wants to refine this value the
        'cMsDwdmIfTransportCalibratedPower' can be used to add
        an offset to the network element setup value."
    ::= { cMsDwdmIfTransportEntry 4 }

cMsDwdmIfTransportCalibratedPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical transport
        calibration power. This is the power offset that user 
        contribute in case the 'reference' value setup by 
        network element would be modified.
        "
    DEFVAL        { 0 }
    ::= { cMsDwdmIfTransportEntry 5 }

cMsDwdmIfTransportInsertionLoss OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Insertion
        Loss of the optical port.
        "
    ::= { cMsDwdmIfTransportEntry 6 }

cMsDwdmIfTransportLaserStatus OBJECT-TYPE
    SYNTAX        LaserStatus
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the status of the laser.
        "
    ::= { cMsDwdmIfTransportEntry 7 }

cMsDwdmIfTransportAmplifierMode OBJECT-TYPE
    SYNTAX        OpticalAmplifierMode
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the working amplifier
        mode.
        "
    ::= { cMsDwdmIfTransportEntry 8 }

cMsDwdmIfTransportGain OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of the gain
        of an amplifier
        "
    ::= { cMsDwdmIfTransportEntry 9 }

cMsDwdmIfTransportReferenceTilt OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the amplifier tilt value
        calculated by the network element."
    ::= { cMsDwdmIfTransportEntry 10 }

cMsDwdmIfTransportCalibratedTilt OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the amplifier tilt offset
        added as offset by user in order to tune the network element
        calculated ('reference') value
        "
    DEFVAL        { 0 }
    ::= { cMsDwdmIfTransportEntry 11 }

cMsDwdmIfTransportDCULoss OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Insertion
        Loss measured for the Dispersion Compensation Unit 
        "
    ::= { cMsDwdmIfTransportEntry 12 }

cMsDwdmIfTransportOSRI OBJECT-TYPE
    SYNTAX    INTEGER {
        enable(1),
        disable(2),
        none(3)
    }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This value indicates the status of the Optical Safety Remote Interlock
        Valid values are -

        enable(1) 	: the OSRI is enable
        disable(2)	: the OSRI is disable
        none(3)		: the OSRI functionality is not present
        "
    DEFVAL        { enable }
    ::= { cMsDwdmIfTransportEntry 13 }

cMsDwdmIfTransportExpectedGain OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of the expected gain
        of an amplifier
        "
    ::= { cMsDwdmIfTransportEntry 14 }

cMsDwdmIfTransportSideIdentifier OBJECT-TYPE
    SYNTAX        SideIdentifier
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the facing side of the optical
	port.
        "
    ::= { cMsDwdmIfTransportEntry 15 }

cMsDwdmIfTransportTDCUCompensation OBJECT-TYPE
    SYNTAX        TDCUCompensation
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
	"This object is used to specify the TDCU Compensation value
	of the optical port belong to a TDCU card.
	"
    ::= { cMsDwdmIfTransportEntry 18 }

cMsDwdmIfTransportAddPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the ADD optical power read at
	the photodiode of the port.
	
	The distinguished value of '-1000' indicates that the power
	cannot be read due to unavaible HW resource."
    ::= { cMsDwdmIfTransportEntry 16 }

cMsDwdmIfTransportOSCPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the OSC optical power read at
        the photodiode of the port.

        The distinguished value of '-1000' indicates that the power
        cannot be read due to unavaible HW resource."
    ::= { cMsDwdmIfTransportEntry 17 }

-- DwdmIfMultiplexSection Table

cMsDwdmIfMultiplexSectionTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmIfMultiplexSectionEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table defines optical multiplex section (band) layer 
        related interface configurations on an interface."
    ::= { cerentMsDwdmIf 3 }

cMsDwdmIfMultiplexSectionEntry OBJECT-TYPE
    SYNTAX        CMsDwdmIfMultiplexSectionEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A collection of objects for configuration on an
        optical multiplex section (band) interface."
    INDEX         { ifIndex }
    ::= { cMsDwdmIfMultiplexSectionTable 1 }

CMsDwdmIfMultiplexSectionEntry ::= SEQUENCE {
    cMsDwdmIfMultiplexSectionRingDirection       RingDirection,
    cMsDwdmIfMultiplexSectionPortRule            OpticalPortRule,
    cMsDwdmIfMultiplexSectionPower               OpticalPowerInDbm,
    cMsDwdmIfMultiplexSectionReferencePower      OpticalPowerInDbm,
    cMsDwdmIfMultiplexSectionCalibratedPower     OpticalPowerInDbm,
    cMsDwdmIfMultiplexSectionInsertionLoss       OpticalAttenInDb,
    cMsDwdmIfMultiplexSectionActualBand          OpticalBand,
    cMsDwdmIfMultiplexSectionExpectedBand        OpticalBand,
    cMsDwdmIfMultiplexSectionSideIdentifier      SideIdentifier
}

cMsDwdmIfMultiplexSectionRingDirection OBJECT-TYPE
    SYNTAX        RingDirection
    MAX-ACCESS    not-accessible
    STATUS        obsolete -- Unsupported on 15454 starting from rel. 8.0
    DESCRIPTION
        "This object is used to specify the ring directionality of
        the port.
        
        The ring directionality gives the configuration of the 
        facing side: facing sides can be east going to west and 
        west going to east."
    ::= { cMsDwdmIfMultiplexSectionEntry 1 }

cMsDwdmIfMultiplexSectionPortRule OBJECT-TYPE
    SYNTAX        OpticalPortRule
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the type of the optical
        port.
        
        A Multiplex Section optical port can assume one of the following
        values:
			add(5)
			drop(6)."
    ::= { cMsDwdmIfMultiplexSectionEntry 2 }

cMsDwdmIfMultiplexSectionPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical power read at
        the photodiode of the port.
        
        The distinguished value of '-1000' indicates that the power
        cannot be read due to unavaible HW resource."
    ::= { cMsDwdmIfMultiplexSectionEntry 3 }

cMsDwdmIfMultiplexSectionReferencePower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical Multiplex Section
        reference power. This is the value of power the network 
        element will expect on the photodiode.
        In case the user wants to refine this value the
        'cMsDwdmIfMultiplexSectionCalibratedPower' can be used to add
        an offset to the network element setup value."
    ::= { cMsDwdmIfMultiplexSectionEntry 4 }

cMsDwdmIfMultiplexSectionCalibratedPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical MultiplexSection
        calibration power. This is the power offset that user 
        contribute in case the 'reference' value setup by 
        network element would be modified.
        "
    DEFVAL        { 0 }
    ::= { cMsDwdmIfMultiplexSectionEntry 5 }

cMsDwdmIfMultiplexSectionInsertionLoss OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Insertion
        Loss of the optical port.
        "
    ::= { cMsDwdmIfMultiplexSectionEntry 6 }

cMsDwdmIfMultiplexSectionActualBand OBJECT-TYPE
    SYNTAX        OpticalBand
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Wavelength
        group which is tuned the optical port.
        "
    ::= { cMsDwdmIfMultiplexSectionEntry 7 }

cMsDwdmIfMultiplexSectionExpectedBand OBJECT-TYPE
    SYNTAX        OpticalBand
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Wavelength
        group that the user expects the optical port will assume.
        "
    ::= { cMsDwdmIfMultiplexSectionEntry 8 }

cMsDwdmIfMultiplexSectionSideIdentifier OBJECT-TYPE
    SYNTAX        SideIdentifier
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the facing side of the optical
        port.
        "
    ::= { cMsDwdmIfMultiplexSectionEntry 9 }


-- DwdmIfChannel Table

cMsDwdmIfChannelTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmIfChannelEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table defines optical channel layer 
        related interface configurations on an interface."
    ::= { cerentMsDwdmIf 4 }

cMsDwdmIfChannelEntry OBJECT-TYPE
    SYNTAX        CMsDwdmIfChannelEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A collection of objects for configuration on an
        optical channel interface."
    INDEX         { ifIndex }
    ::= { cMsDwdmIfChannelTable 1 }

CMsDwdmIfChannelEntry ::= SEQUENCE {
    cMsDwdmIfChannelRingDirection       RingDirection,
    cMsDwdmIfChannelPortRule            OpticalPortRule,
    cMsDwdmIfChannelPower               OpticalPowerInDbm,
    cMsDwdmIfChannelReferencePower      OpticalPowerInDbm,
    cMsDwdmIfChannelCalibratedPower     OpticalPowerInDbm,
    cMsDwdmIfChannelInsertionLoss       OpticalAttenInDb,
    cMsDwdmIfChannelActualWavelength    OpticalWavelength,
    cMsDwdmIfChannelExpectedWavelength  OpticalWavelength,
    cMsDwdmIfChannelSideIdentifier      SideIdentifier
}

cMsDwdmIfChannelRingDirection OBJECT-TYPE
    SYNTAX        RingDirection
    MAX-ACCESS    not-accessible
    STATUS        obsolete -- Unsupported on 15454 starting from rel. 8.0
    DESCRIPTION
        "This object is used to specify the ring directionality of
        the port.
        
        The ring directionality gives the configuration of the 
        facing side: facing sides can be east going to west and 
        west going to east."
    ::= { cMsDwdmIfChannelEntry 1 }

cMsDwdmIfChannelPortRule OBJECT-TYPE
    SYNTAX        OpticalPortRule
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the type of the optical
        port.
        
        A Multiplex Section optical port can assume one of the following
        values:
			add(5)
			drop(6)."
    ::= { cMsDwdmIfChannelEntry 2 }

cMsDwdmIfChannelPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical power read at
        the photodiode of the port.
        
        The distinguished value of '-1000' indicates that the power
        cannot be read due to unavaible HW resource."
    ::= { cMsDwdmIfChannelEntry 3 }

cMsDwdmIfChannelReferencePower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical Multiplex Section
        reference power. This is the value of power the network 
        element will expect on the photodiode.
        In case the user wants to refine this value the
        'cMsDwdmIfChannelCalibratedPower' can be used to add
        an offset to the network element setup value."
    ::= { cMsDwdmIfChannelEntry 4 }

cMsDwdmIfChannelCalibratedPower OBJECT-TYPE
    SYNTAX        OpticalPowerInDbm
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the optical Channel
        calibration power. This is the power offset that user 
        contribute in case the 'reference' value setup by 
        network element would be modified.
        "
    DEFVAL        { 0 }
    ::= { cMsDwdmIfChannelEntry 5 }

cMsDwdmIfChannelInsertionLoss OBJECT-TYPE
    SYNTAX        OpticalAttenInDb
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Insertion
        Loss of the optical port.
        "
    ::= { cMsDwdmIfChannelEntry 6 }

cMsDwdmIfChannelActualWavelength OBJECT-TYPE
    SYNTAX        OpticalWavelength
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Wavelength
        that is tuned the optical port.
        "
    ::= { cMsDwdmIfChannelEntry 7 }

cMsDwdmIfChannelExpectedWavelength OBJECT-TYPE
    SYNTAX        OpticalWavelength
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to specify the value of Wavelength
        that the user expects the optical port will assume.
        "
    ::= { cMsDwdmIfChannelEntry 8 }

cMsDwdmIfChannelSideIdentifier OBJECT-TYPE
    SYNTAX        SideIdentifier
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object is used to specify the facing side of the optical
        port.
        "
    ::= { cMsDwdmIfChannelEntry 9 }


-- cerentMsDwdmOtn group
-- This group contains error counters and thresholds
-- for the interfaces with OTN ( G.709 ) monitoring enabled.

-- OtnThresholds Table

cMsDwdmOtnThresholdsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmOtnThresholdsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table provides objects for configuring OTN ( G.709 )
        thresholds on trunk side interfaces."
    ::= { cerentMsDwdmOtn 1 }

cMsDwdmOtnThresholdsEntry OBJECT-TYPE
    SYNTAX        CMsDwdmOtnThresholdsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the cMsDwdmOtnThresholdsTable."
         
    INDEX         { ifIndex, cMsDwdmOtnThreshMonType,
                    cMsDwdmOtnThreshIntervalType }

    ::= { cMsDwdmOtnThresholdsTable 1 }

CMsDwdmOtnThresholdsEntry ::= SEQUENCE {
    cMsDwdmOtnThreshMonType        MonitorType,
    cMsDwdmOtnThreshIntervalType   LocationAndIntervalType,  
    cMsDwdmOtnThreshFC             Unsigned32,
    cMsDwdmOtnThreshES             Unsigned32,
    cMsDwdmOtnThreshSES            Unsigned32,
    cMsDwdmOtnThreshUAS            Unsigned32,
    cMsDwdmOtnThreshBBE            Unsigned32
}  

cMsDwdmOtnThreshMonType OBJECT-TYPE
    SYNTAX        MonitorType
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object is an index to the cMsDwdmOtnThresholdsTable.
         It is used to specify the type of monitoring threshold 
         being set on an interface for OTN ( G.709 ) statistics."
    ::= { cMsDwdmOtnThresholdsEntry 1 }

cMsDwdmOtnThreshIntervalType OBJECT-TYPE
    SYNTAX        LocationAndIntervalType
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object is an index to the cMsDwdmOtnThresholdsTable.
         It specifies the interval type and monitoring location for 
         the performance statistics."
    ::= { cMsDwdmOtnThresholdsEntry 2 }

cMsDwdmOtnThreshFC OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to set the threshold for the number of 
        failure counts on applicable trunk side interfaces."
    ::= { cMsDwdmOtnThresholdsEntry 3 }


cMsDwdmOtnThreshES OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to set the threshold for the number of 
        Errored Seconds on applicable trunk side interfaces." 
    ::= { cMsDwdmOtnThresholdsEntry 4 }
     
cMsDwdmOtnThreshSES OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to set the threshold for the number of 
        Severely Errored Seconds on applicable trunk side 
        interfaces."
    ::= { cMsDwdmOtnThresholdsEntry 5 }


cMsDwdmOtnThreshUAS OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to set the threshold for the number of 
        Unavailable Seconds on applicable trunk side interfaces." 
    ::= { cMsDwdmOtnThresholdsEntry 6 }

cMsDwdmOtnThreshBBE OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to set the threshold for the number of 
        Bit Block Errors on applicable trunk side interfaces."
    ::= { cMsDwdmOtnThresholdsEntry 7 }


-- OTN Current Table
-- used to gather PM stats for OTN (G.709) enabled interfaces.

cMsDwdmOtnCurrentTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmOtnCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the cumulative OTN (G.709) PM stats    
         for the trunk side interfaces.
        "
    ::= { cerentMsDwdmOtn 2 }

cMsDwdmOtnCurrentEntry OBJECT-TYPE
    SYNTAX        CMsDwdmOtnCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the cMsDwdmOtnCurrentTable."  
    INDEX         { ifIndex,
                    cMsDwdmOtnCurrentMonType,
                    cMsDwdmOtnCurIntervalType }
    ::= { cMsDwdmOtnCurrentTable 1 }

CMsDwdmOtnCurrentEntry ::= SEQUENCE {
    cMsDwdmOtnCurrentMonType   MonitorType,
    cMsDwdmOtnCurIntervalType  LocationAndIntervalType,  
    cMsDwdmOtnCurrentFC        Counter32,
    cMsDwdmOtnCurrentES        Counter32,
    cMsDwdmOtnCurrentSES       Counter32,
    cMsDwdmOtnCurrentUAS       Counter32,
    cMsDwdmOtnCurrentBBE       Counter32,
    cMsDwdmOtnCurrentESR       Counter32,
    cMsDwdmOtnCurrentSESR      Counter32,
    cMsDwdmOtnCurrentBBER      Counter32
}

cMsDwdmOtnCurrentMonType OBJECT-TYPE
    SYNTAX        MonitorType
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object is an index to the cMsDwdmOtnCurrentTable.
         It is used to otain G.709 statistics for path, section  
         and tcm ( tandem connection)."  
    ::= { cMsDwdmOtnCurrentEntry 1 }

cMsDwdmOtnCurIntervalType OBJECT-TYPE
    SYNTAX        LocationAndIntervalType
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object is an index to the cMsDwdmOtnCurrentTable.
         It specifies the interval type (farEnd/ nearEnd and
         15 min/ 1 Day )for the table objects."  
    ::= { cMsDwdmOtnCurrentEntry 2 }

cMsDwdmOtnCurrentFC OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of
        failure counts encountered on this interface in the 
        current interval."  
    ::= { cMsDwdmOtnCurrentEntry 3 }

cMsDwdmOtnCurrentES OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only  
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Errored Seconds encountered  
         on this interface in the current interval."
    ::= { cMsDwdmOtnCurrentEntry 4 }
    
cMsDwdmOtnCurrentSES OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Severely Errored Seconds encountered 
         on this interface in the current interval."
    ::= { cMsDwdmOtnCurrentEntry 5 }

cMsDwdmOtnCurrentUAS OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Unavailable Seconds encountered
         on this interface in the current interval."
    ::= { cMsDwdmOtnCurrentEntry 6 }

cMsDwdmOtnCurrentBBE OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Background Block Errors encountered
         on this interface in the current interval."
    ::= { cMsDwdmOtnCurrentEntry 7 }

cMsDwdmOtnCurrentESR OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the Errored Seconds Ratio
         on this interface in the current interval."
    ::= { cMsDwdmOtnCurrentEntry 8 }

cMsDwdmOtnCurrentSESR OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the Severely Errored Seconds  
         ratio on this interface in the current interval."
    ::= { cMsDwdmOtnCurrentEntry 9 }

cMsDwdmOtnCurrentBBER OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the Background Block Errors  
        ratio on this interface in the current interval."
    ::= { cMsDwdmOtnCurrentEntry 10 }
   

-- OTN Interval Table
-- used to gather PM stats for OTN (G.709) enabled interfaces.

cMsDwdmOtnIntervalTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmOtnIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the cumulative OTN (G.709) PM stats    
         for the trunk side interfaces.
        "
    ::= { cerentMsDwdmOtn 3 }

cMsDwdmOtnIntervalEntry OBJECT-TYPE
    SYNTAX        CMsDwdmOtnIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the cMsDwdmOtnIntervalTable."  
    INDEX         { ifIndex,
                    cMsDwdmOtnIntervalMonType,
                    cMsDwdmOtnIntervalType,
                    cMsDwdmOtnIntervalNum }
    ::= { cMsDwdmOtnIntervalTable 1 }

CMsDwdmOtnIntervalEntry ::= SEQUENCE {
    cMsDwdmOtnIntervalMonType   MonitorType,
    cMsDwdmOtnIntervalType      LocationAndIntervalType,  
    cMsDwdmOtnIntervalNum       Integer32,   
    cMsDwdmOtnIntervalFC        Counter32,
    cMsDwdmOtnIntervalES        Counter32,
    cMsDwdmOtnIntervalSES       Counter32,
    cMsDwdmOtnIntervalUAS       Counter32,
    cMsDwdmOtnIntervalBBE       Counter32,
    cMsDwdmOtnIntervalESR       Counter32,
    cMsDwdmOtnIntervalSESR      Counter32,
    cMsDwdmOtnIntervalBBER      Counter32,
    cMsDwdmOtnIntervalValidData TruthValue
}

cMsDwdmOtnIntervalMonType OBJECT-TYPE
    SYNTAX        MonitorType
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object is an index to the cMsDwdmOtnIntervalTable.
         It is used to otain G.709 statistics for path, section  
         and tcm ( tandem connection)."  
    ::= { cMsDwdmOtnIntervalEntry 1 }

cMsDwdmOtnIntervalType OBJECT-TYPE
    SYNTAX        LocationAndIntervalType
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object is an index to the cMsDwdmOtnIntervalTable.
         It specifies the interval type (farEnd/ nearEnd and
         15 min/ 1 Day )for the table objects."  
    ::= { cMsDwdmOtnIntervalEntry 2 }

cMsDwdmOtnIntervalNum OBJECT-TYPE
    SYNTAX        Integer32 (1..96)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object is an index to the cMsDwdmOtnIntervalTable.
         This object gives the  number of the interval.
         It is a number between 1 and 96, which identifies the
         interval for which the set of OTN performance values is
         available. 
         
         The interval identified by 1 is the most recent
         15 minute or 24 hour interval, and the interval
         identified by N is the interval immediately preceding the 
         one identified by N-1."
    ::= { cMsDwdmOtnIntervalEntry 3 }

cMsDwdmOtnIntervalFC OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of
        failure counts encountered on this interface in a
        particular interval."  
    ::= { cMsDwdmOtnIntervalEntry 4 }

cMsDwdmOtnIntervalES OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only  
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Errored Seconds encountered  
         on this interface in a particular interval."
    ::= { cMsDwdmOtnIntervalEntry 5 }
    
cMsDwdmOtnIntervalSES OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Severely Errored Seconds encountered 
         on this interface in a particular interval."
    ::= { cMsDwdmOtnIntervalEntry 6 }

cMsDwdmOtnIntervalUAS OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Unavailable Seconds encountered
         on this interface in a particular interval."
    ::= { cMsDwdmOtnIntervalEntry 7 }

cMsDwdmOtnIntervalBBE OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Background Block Errors encountered
         on this interface in a particular interval."
    ::= { cMsDwdmOtnIntervalEntry 8 }

cMsDwdmOtnIntervalESR OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the Errored Seconds Ratio
         on this interface in a particular interval."
    ::= { cMsDwdmOtnIntervalEntry 9 }

cMsDwdmOtnIntervalSESR OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the Severely Errored Seconds  
         ratio on this interface in a particular interval."
    ::= { cMsDwdmOtnIntervalEntry 10 }

cMsDwdmOtnIntervalBBER OBJECT-TYPE
    SYNTAX        Counter32 
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the Background Block Errors  
        ratio on this interface in a particular interval."
    ::= { cMsDwdmOtnIntervalEntry 11 }

cMsDwdmOtnIntervalValidData OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This variable indicates if the data for this
         interval is valid."
   ::= { cMsDwdmOtnIntervalEntry 12 }
    

--  cerentMsDwdmFEC    
--  This group contains FEC ( Forward Error Correction ) error
--  counters and thresholds for applicable interfaces.


--  FECThresholds Table
cMsDwdmFECThresholdsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmFECThresholdsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the configurable thresholds     
        for FEC ( Forward Error Correction ) statistics."
    ::= { cerentMsDwdmFEC 1 }

cMsDwdmFECThresholdsEntry OBJECT-TYPE
    SYNTAX        CMsDwdmFECThresholdsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the cMsDwdmFECThresholdsTable."  
    INDEX         { ifIndex, cMsDwdmFECThreshIntervalType }
    ::= { cMsDwdmFECThresholdsTable 1 }

CMsDwdmFECThresholdsEntry ::= SEQUENCE {
    cMsDwdmFECThreshIntervalType     CerentPeriod,
    cMsDwdmFECThreshBitErrCor        Unsigned32,  
    cMsDwdmFECThreshByteErrCor       Unsigned32,  
    cMsDwdmFECThreshZeroErrDet       Unsigned32,  
    cMsDwdmFECThreshOneErrDet        Unsigned32,  
    cMsDwdmFECThreshUncorWords       Unsigned32  
}

cMsDwdmFECThreshIntervalType  OBJECT-TYPE
    SYNTAX        CerentPeriod
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object is an index to the  cMsDwdmFECThreshTable.
         It gives the type of the interval for which the thresholds
         are being set.
        "
    ::= { cMsDwdmFECThresholdsEntry 1 }


cMsDwdmFECThreshBitErrCor   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object sets the threshold value of the number of 
         Bit Errors Corrected on an applicable trunk side 
         interface."
    ::= { cMsDwdmFECThresholdsEntry 2 }
     
 cMsDwdmFECThreshByteErrCor   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object sets the threshold value of the number of
         Byte Errors Corrected on an applicable trunk side
         interface."
    ::= { cMsDwdmFECThresholdsEntry 3 }
     
cMsDwdmFECThreshZeroErrDet   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object sets the threshold value of the number of
         zero bit errors detected on an applicable trunk side
         interface."
    ::= { cMsDwdmFECThresholdsEntry 4 }
     
cMsDwdmFECThreshOneErrDet   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object sets the threshold value of the number of
         one bit errors detected on an applicable trunk side
         interface."
    ::= { cMsDwdmFECThresholdsEntry 5 }
     
cMsDwdmFECThreshUncorWords   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object sets the threshold value of the number of 
         Uncorrectable Words on an applicable trunk side interface."
    ::= { cMsDwdmFECThresholdsEntry 6 }


-- FEC Current Table
cMsDwdmFECCurrentTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmFECCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the cumulative PM statistics    
        for FEC ( Forward Error Correction ) on an applicable 
        interface."
    ::= { cerentMsDwdmFEC 2 }

cMsDwdmFECCurrentEntry OBJECT-TYPE
    SYNTAX        CMsDwdmFECCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the cMsDwdmFECCurrentTable."  
    INDEX         { ifIndex,cMsDwdmFECCurIntervalType }
    ::= { cMsDwdmFECCurrentTable 1 }

CMsDwdmFECCurrentEntry ::= SEQUENCE {
    cMsDwdmFECCurIntervalType         CerentPeriod,
    cMsDwdmFECCurrentBitErrCor        Counter32,  
    cMsDwdmFECCurrentByteErrCor       Counter32,  
    cMsDwdmFECCurrentZeroErrDet       Counter32,  
    cMsDwdmFECCurrentOneErrDet        Counter32,  
    cMsDwdmFECCurrentUncorWords       Counter32  
}

cMsDwdmFECCurIntervalType OBJECT-TYPE
    SYNTAX        CerentPeriod
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object is an index to the  cMsDwdmFECCurrentTable.
         It gives the type of interval for which the FEC values
         have been collected."
    ::= { cMsDwdmFECCurrentEntry 1 }

cMsDwdmFECCurrentBitErrCor   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Bit Errors Corrected
         on this interface in the current interval."
    ::= { cMsDwdmFECCurrentEntry 2 }
     
 cMsDwdmFECCurrentByteErrCor   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Byte Errors Corrected
         on this interface in the current interval."
    ::= { cMsDwdmFECCurrentEntry 3 }
     
cMsDwdmFECCurrentZeroErrDet   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         zero bit errors detected
         on this interface in the current interval."
    ::= { cMsDwdmFECCurrentEntry 4 }
     
cMsDwdmFECCurrentOneErrDet   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         one bit errors detected
         on this interface in the current interval."
    ::= { cMsDwdmFECCurrentEntry 5 }
     
cMsDwdmFECCurrentUncorWords   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Uncorrectable Words encountered 
         on this interface in the current interval."
    ::= { cMsDwdmFECCurrentEntry 6 }

    
-- FEC Interval Table
cMsDwdmFECIntervalTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CMsDwdmFECIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the cumulative PM statistics    
        for FEC ( Forward Error Correction ) on an applicable 
        interface."
    ::= { cerentMsDwdmFEC 3 }

cMsDwdmFECIntervalEntry OBJECT-TYPE
    SYNTAX        CMsDwdmFECIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the cMsDwdmFECIntervalTable."  
    INDEX         { ifIndex,cMsDwdmFECIntervalType,
                    cMsDwdmFECIntervalNum }
    ::= { cMsDwdmFECIntervalTable 1 }

CMsDwdmFECIntervalEntry ::= SEQUENCE {
    cMsDwdmFECIntervalType             CerentPeriod,
    cMsDwdmFECIntervalNum              Integer32,    
    cMsDwdmFECIntervalBitErrCor        Counter32,  
    cMsDwdmFECIntervalByteErrCor       Counter32,  
    cMsDwdmFECIntervalZeroErrDet       Counter32,  
    cMsDwdmFECIntervalOneErrDet        Counter32,  
    cMsDwdmFECIntervalUncorWords       Counter32,  
    cMsDwdmFECIntervalValidData        TruthValue  
}

cMsDwdmFECIntervalType OBJECT-TYPE
    SYNTAX        CerentPeriod
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object is an index to the  cMsDwdmFECIntervalTable.
         It gives the type of interval for which the FEC values
         have been collected."
    ::= { cMsDwdmFECIntervalEntry 1 }

cMsDwdmFECIntervalNum OBJECT-TYPE
    SYNTAX        Integer32 (1..96)
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object is an index to the  cMsDwdmFECIntervalTable.
         It is a number between 1 and 96, which identifies the
         interval for which the set of FEC PM values is
         available. 
         
         The interval identified by 1 is the most recent
         15 minute or 24 hour interval, and the interval
         identified by N is the interval immediately preceding the one
         identified by N-1."
    ::= { cMsDwdmFECIntervalEntry 2 }     

cMsDwdmFECIntervalBitErrCor   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Bit Errors Corrected
         on this interface in a particular interval."
    ::= { cMsDwdmFECIntervalEntry 3 }
     
 cMsDwdmFECIntervalByteErrCor   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Byte Errors Corrected
         on this interface in a particular interval."
    ::= { cMsDwdmFECIntervalEntry 4 }
     
cMsDwdmFECIntervalZeroErrDet   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         zero bit errors detected
         on this interface in a particular interval."
    ::= { cMsDwdmFECIntervalEntry 5 }
     
cMsDwdmFECIntervalOneErrDet   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         one bit errors detected
         on this interface in a particular interval."
    ::= { cMsDwdmFECIntervalEntry 6 }
     
cMsDwdmFECIntervalUncorWords   OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 
         Uncorrectable Words encountered 
         on this interface in a particular interval."
    ::= { cMsDwdmFECIntervalEntry 7 }

cMsDwdmFECIntervalValidData OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This variable indicates if the data for this
         interval is valid."
   ::= { cMsDwdmFECIntervalEntry 8 }


--  cerentMsDwdm8B10B group

--  This group contains 8B10B counters for interface 
--  data traffic, collected by the monitoring hardware
--  for interfaces like Fiber Channel/Gig E.

--  8B10BThresholds Table
c8B10BThresholdsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF C8B10BThresholdsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the configurable thresholds    
        for the 8B10B stats."
    ::= { cerentMsDwdm8B10B 1 }

c8B10BThresholdsEntry OBJECT-TYPE
    SYNTAX        C8B10BThresholdsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the c8B10BThresholds Table."  
    INDEX         { ifIndex, c8B10BThreshIntervalType }
    ::= { c8B10BThresholdsTable 1 }

C8B10BThresholdsEntry ::= SEQUENCE {
    c8B10BThreshIntervalType                IntervalType,
    c8B10BThreshInvalidPkts                 Unsigned32,
    c8B10BThreshIPOverflow                  Unsigned32,
    c8B10BThreshHCInvalidPkts               Counter64,
    c8B10BThreshValidPkts                   Unsigned32,
    c8B10BThreshVPOverflow                  Unsigned32,
    c8B10BThreshHCValidPkts                 Counter64,
    c8B10BThreshIdleSets                    Unsigned32,
    c8B10BThreshISOverflow                  Unsigned32,
    c8B10BThreshHCIdleSets                  Counter64,
    c8B10BThreshNonIdleSets                 Unsigned32,
    c8B10BThreshNISOverflow                 Unsigned32,
    c8B10BThreshHCNonIdleSets               Counter64,
    c8B10BThreshDataSets                    Unsigned32,
    c8B10BThreshDSOverflow                  Unsigned32,
    c8B10BThreshHCDataSets                  Counter64,
    c8B10BThreshCodeViols                   Unsigned32,
    c8B10BThreshCVOverflow                  Unsigned32,
    c8B10BThreshHCCodeViols                 Counter64
  }

c8B10BThreshIntervalType OBJECT-TYPE
    SYNTAX        IntervalType
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object is an index to the c8B10BThresholdsTable.
         It gives the type of interval."
    ::= { c8B10BThresholdsEntry 1 }

c8B10BThreshInvalidPkts   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the lower word value of the threshold 
        associated with the number of 8B10B invalid packets.
        
        The object c8B10BThreshIPOverflow contains the 
        higher 32 bit value of this number. "
    ::= { c8B10BThresholdsEntry 2 }
    
c8B10BThreshIPOverflow   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the higher word value of the threshold 
        associated with the number of 8B10B invalid packets.
        
        The object c8B10BThreshInvalidPkts contains the 
        lower 32 bits of this number. If the threshold is greater
        than 4,294,967,295, the higher word value will be stored in
        this object."
    ::= { c8B10BThresholdsEntry 3 }

c8B10BThreshHCInvalidPkts   OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object is used to obtain the value of threshold 
        configured for the number of 8B10B Invalid Packets.

        This a High capacity ( 64 bits ) counter."
    ::= { c8B10BThresholdsEntry 4 }

c8B10BThreshValidPkts   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the lower word value of the threshold 
        associated with the number of 8B10B valid packets.
        
        The object c8B10BThreshVPOverflow contains the 
        higher 32 bit value of this number. "
    ::= { c8B10BThresholdsEntry 5 }
    
c8B10BThreshVPOverflow   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the higher word value of the threshold 
        associated with the number of 8B10B valid packets.
        
        The object c8B10BThreshValidPkts contains the 
        lower 32 bits of this number. If the threshold is greater
        than 4,294,967,295, the higher word value will be stored in
        this object."
    ::= { c8B10BThresholdsEntry 6 }

c8B10BThreshHCValidPkts   OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object is used to obtain the value of threshold 
        configured for the number of 8B10B Valid Packets.

        This a High capacity ( 64 bits ) counter."
    ::= { c8B10BThresholdsEntry 7 }

c8B10BThreshIdleSets   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the lower word value of the threshold 
        associated with the number of 8B10B idle sets.
        
        The object c8B10BThreshISOverflow contains the 
        higher 32 bit value of this number. "
    ::= { c8B10BThresholdsEntry 8 }
    
c8B10BThreshISOverflow   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the higher word value of the threshold 
        associated with the number of 8B10B idle sets.
        
        The object c8B10BThreshIdleSets contains the 
        lower 32 bits of this number. If the threshold is greater
        than 4,294,967,295, the higher word value will be stored in
        this object."
    ::= { c8B10BThresholdsEntry 9 }

c8B10BThreshHCIdleSets   OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object is used to obtain the value of threshold 
        configured for the number of 8B10B idle sets.

        This a High capacity ( 64 bits ) counter."
    ::= { c8B10BThresholdsEntry 10 }

c8B10BThreshNonIdleSets   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the lower word value of the threshold 
        associated with the number of 8B10B non idle sets.
        
        The object c8B10BThreshNISOverflow contains the 
        higher 32 bit value of this number. "
    ::= { c8B10BThresholdsEntry 11 }
    
c8B10BThreshNISOverflow   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the higher word value of the threshold 
        associated with the number of 8B10B non idle sets.
        
        The object c8B10BThreshNonIdleSets contains the 
        lower 32 bits of this number. If the threshold is greater
        than 4,294,967,295, the higher word value will be stored in
        this object."
    ::= { c8B10BThresholdsEntry 12 }

c8B10BThreshHCNonIdleSets   OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object is used to obtain the value of threshold 
        configured for the number of 8B10B non idle sets.

        This a High capacity ( 64 bits ) counter."
    ::= { c8B10BThresholdsEntry 13 }

c8B10BThreshDataSets   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the lower word value of the threshold 
        associated with the number of 8B10B data code groups.
        
        The object c8B10BThreshDSOverflow contains the 
        higher 32 bit value of this number. "
    ::= { c8B10BThresholdsEntry 14 }
    
c8B10BThreshDSOverflow   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the higher word value of the threshold 
        associated with the number of 8B10B data code groups.
        
        The object c8B10BThreshDataSets contains the 
        lower 32 bits of this number. If the threshold is greater
        than 4,294,967,295, the higher word value will be stored in
        this object."
    ::= { c8B10BThresholdsEntry 15 }

c8B10BThreshHCDataSets   OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object is used to obtain the value of threshold 
        configured for the number of 8B10B data code groups.

        This a High capacity ( 64 bits ) counter."
    ::= { c8B10BThresholdsEntry 16 }
    
c8B10BThreshCodeViols   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the lower word value of the threshold 
        associated with the number of 8B10B coding violations 
        encountered.
        
        The object c8B10BThreshCVOverflow contains the 
        higher 32 bit value of this number."
    ::= { c8B10BThresholdsEntry 17 }

c8B10BThreshCVOverflow   OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write        
    STATUS        current
    DESCRIPTION
        "This object represents the higher word value of threshold 
        associated with the number of 8B10B code violations 
        encountered.
        
        The object c8B10BThreshCodeViols contains the 
        lower 32 bits of this number. If the threshold is greater
        than 4,294,967,295, the higher word value will be stored in
        this object."
    ::= { c8B10BThresholdsEntry 18 }
  
c8B10BThreshHCCodeViols   OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object is used to obtain the value of threshold 
        configured for the number of 8B10B Coding Violations
        on this interface.

        This a High capacity ( 64 bits ) counter."
    ::= { c8B10BThresholdsEntry 19 }


--  8B10BCurrent Table
c8B10BCurrentTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF C8B10BCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the cumulative PM statistics    
        for the Fiber Channel/ Gigabit Ethernet (8B10B) 
        on the applicable interfaces."
    ::= { cerentMsDwdm8B10B 2 }

c8B10BCurrentEntry OBJECT-TYPE
    SYNTAX        C8B10BCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the c8B10BCurrentTable."  
    INDEX         { ifIndex, c8B10BCurIntervalType }
    ::= { c8B10BCurrentTable 1 }

C8B10BCurrentEntry ::= SEQUENCE {
    c8B10BCurIntervalType               IntervalType,
    c8B10BCurrentCodeViols              Counter32,
    c8B10BCurrentCVOverflow             Counter32,
    c8B10BCurrentHCCodeViols            Counter64,
    c8B10BCurrentValidPkts              Counter32,
    c8B10BCurrentVPOverflow             Counter32,
    c8B10BCurrentHCValidPkts            Counter64,
    c8B10BCurrentInvalidPkts            Counter32,
    c8B10BCurrentIPOverflow             Counter32,
    c8B10BCurrentHCInvalidPkts          Counter64,
    c8B10BCurrentIdleSets               Counter32,
    c8B10BCurrentISOverflow             Counter32,
    c8B10BCurrentHCIdleSets             Counter64,
    c8B10BCurrentNonIdleSets            Counter32,
    c8B10BCurrentNISOverflow            Counter32,
    c8B10BCurrentHCNonIdleSets          Counter64,
    c8B10BCurrentDataSets               Counter32,
    c8B10BCurrentDSOverflow             Counter32,
    c8B10BCurrentHCDataSets             Counter64
   }

c8B10BCurIntervalType OBJECT-TYPE
    SYNTAX        IntervalType
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object is an index to the  c8B10BCurrentTable.
         It gives the type of interval for which 8B10B data has been
         collected."
    ::= { c8B10BCurrentEntry 1 }

c8B10BCurrentCodeViols OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B Coding
         Violations encountered on an interface for the current
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BCurrentCVOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCCodeViols, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 2 }

c8B10BCurrentCVOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         Coding Violations encountered on an interface for the 
         current interval. If the value of 
         c8B10BCurrentCodeViols
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCCodeViols, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 3 }
    
c8B10BCurrentHCCodeViols OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B coding 
         violations encountered on this interface in the current
         interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BCurrentEntry 4 }

c8B10BCurrentValidPkts OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B Valid 
         Packets encountered on an interface for the current
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BCurrentVPOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCValidPkts, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 5 }     
    
c8B10BCurrentVPOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         valid packets encountered on an interface for the 
         current interval. If the value of 
         c8B10BCurrentValidPkts
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCValidPkts, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 6 }
    
c8B10BCurrentHCValidPkts OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B valid packets 
         on this interface in the current interval.

         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BCurrentEntry 7 }     

c8B10BCurrentInvalidPkts OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B invalid 
         packets encountered on an interface for the current
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BCurrentIPOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCInvalidPkts, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 8 }

c8B10BCurrentIPOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         invalid packets encountered on an interface for the 
         current interval. If the value of 
         c8B10BCurrentInvalidPkts
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
    
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCInvalidPkts, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 9 }
    
c8B10BCurrentHCInvalidPkts OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B invalid packets 
         encountered on this interface in the current interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BCurrentEntry 10 }

c8B10BCurrentIdleSets OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B Idle 
         sets encountered on an interface for the current
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BCurrentISOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCIdleSets, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 11 }

c8B10BCurrentISOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         idle sets encountered on an interface for the 
         current interval. If the value of 
         c8B10BCurrentIdleSets
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCIdleSets, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 12 }
    
c8B10BCurrentHCIdleSets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B idle sets 
         encountered on this interface in the current interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BCurrentEntry 13 }

c8B10BCurrentNonIdleSets OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B non idle 
         sets encountered on an interface for the current
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BCurrentNISOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCNonIdleSets, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 14 }
    
c8B10BCurrentNISOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         non idle sets encountered on an interface for the 
         current interval. If the value of 
         c8B10BCurrentNonIdleSets
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCNonIdleSets, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 15 }
    
c8B10BCurrentHCNonIdleSets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B non-idle sets 
         encountered on this interface in the current interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BCurrentEntry 16 }

c8B10BCurrentDataSets OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B data 
         code groups encountered on an interface for the current
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BCurrentDSOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCDataSets, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 17 }   

c8B10BCurrentDSOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         data code groups encountered on an interface for the 
         current interval. If the value of 
         c8B10BCurrentDataSets
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.    
         
         SNMP v2c or v3 managers can directly use
         c8B10BCurrentHCDataSets, which is a 64 bit counter."
    ::= { c8B10BCurrentEntry 18 }    

c8B10BCurrentHCDataSets OBJECT-TYPE
    SYNTAX        Counter64 
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B data code 
         groups encountered on this interface in the current interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BCurrentEntry 19 }

  
--  8B10BInterval Table
c8B10BIntervalTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF C8B10BIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION  
        "This table contains the cumulative PM statistics    
        for the Fiber Channel/ Gigabit Ethernet (8B10B) 
        on the applicable interfaces."
    ::= { cerentMsDwdm8B10B 3 }

c8B10BIntervalEntry OBJECT-TYPE
    SYNTAX        C8B10BIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the c8B10BIntervalTable."  
    INDEX         { ifIndex, c8B10BIntervalType,
                    c8B10BIntervalNum }
    ::= { c8B10BIntervalTable 1 }

C8B10BIntervalEntry ::= SEQUENCE {
    c8B10BIntervalType                   IntervalType,
    c8B10BIntervalNum                    Integer32,    
    c8B10BIntervalCodeViols              Counter32,
    c8B10BIntervalCVOverflow             Counter32,
    c8B10BIntervalHCCodeViols            Counter64,
    c8B10BIntervalValidPkts              Counter32,
    c8B10BIntervalVPOverflow             Counter32,
    c8B10BIntervalHCValidPkts            Counter64,
    c8B10BIntervalInvalidPkts            Counter32,
    c8B10BIntervalIPOverflow             Counter32,
    c8B10BIntervalHCInvalidPkts          Counter64,
    c8B10BIntervalIdleSets               Counter32,
    c8B10BIntervalISOverflow             Counter32,
    c8B10BIntervalHCIdleSets             Counter64,
    c8B10BIntervalNonIdleSets            Counter32,
    c8B10BIntervalNISOverflow            Counter32,
    c8B10BIntervalHCNonIdleSets          Counter64,
    c8B10BIntervalDataSets               Counter32,
    c8B10BIntervalDSOverflow             Counter32,
    c8B10BIntervalHCDataSets             Counter64,
    c8B10BIntervalValidData              TruthValue
   }

c8B10BIntervalType OBJECT-TYPE
    SYNTAX        IntervalType
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object is an index to the  c8B10BIntervalTable.
         It gives the type of interval for which 8B10B data has been
         collected."
    ::= { c8B10BIntervalEntry 1 }

c8B10BIntervalNum OBJECT-TYPE
    SYNTAX        Integer32 (1..96)
    MAX-ACCESS    not-accessible        
    STATUS        current
    DESCRIPTION
        "This object gives the  number of the interval.
         It is a number between 1 and 96, which identifies the
         interval for which the set of 8B10B performance values is
         available. 
         
         The interval identified by 1 is the most recent
         15 minute or 24 hour interval, and the interval
         identified by N is the interval immediately preceding the one
         identified by N-1."
    ::= { c8B10BIntervalEntry 2 }     

c8B10BIntervalCodeViols OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B Coding
         Violations encountered on an interface for a particular
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BIntervalCVOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCCodeViols, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 3 }

c8B10BIntervalCVOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         Coding Violations encountered on an interface for a 
         particular interval. If the value of 
         c8B10BIntervalCodeViols
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCCodeViols, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 4 }
    
c8B10BIntervalHCCodeViols OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only 
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B coding 
         violations encountered on this interface in a particular
         interval.
         
         This is a High Capacity ( 64 bit ) counter.
        "
    ::= { c8B10BIntervalEntry 5 }

c8B10BIntervalValidPkts OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B Valid 
         Packets encountered on an interface for a particular
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BIntervalVPOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCValidPkts, which is a 64 bit counter.
        "  
    ::= { c8B10BIntervalEntry 6 }     
    
c8B10BIntervalVPOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         valid packets encountered on an interface for a 
         particular interval. If the value of 
         c8B10BIntervalValidPkts
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCValidPkts, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 7 }
    
c8B10BIntervalHCValidPkts OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B valid packets 
         on this interface in a particular interval.

         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BIntervalEntry 8 }     

c8B10BIntervalInvalidPkts OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B invalid 
         packets encountered on an interface for a particular
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BIntervalIPOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCInvalidPkts, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 9 }

c8B10BIntervalIPOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         invalid packets encountered on an interface for a 
         particular interval. If the value of 
         c8B10BIntervalInvalidPkts
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
    
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCInvalidPkts, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 10 }
    
c8B10BIntervalHCInvalidPkts OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B invalid packets 
         encountered on this interface in a particular interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BIntervalEntry 11 }

c8B10BIntervalIdleSets OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B Idle 
         sets encountered on an interface for a particular
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BIntervalISOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCIdleSets, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 12 }

c8B10BIntervalISOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         idle sets encountered on an interface for a 
         particular interval. If the value of 
         c8B10BIntervalIdleSets
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCIdleSets, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 13 }
    
c8B10BIntervalHCIdleSets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B idle sets 
         encountered on this interface in a particular interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BIntervalEntry 14 }

c8B10BIntervalNonIdleSets OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B non idle 
         sets encountered on an interface for a particular
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BIntervalNISOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCNonIdleSets, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 15 }
    
c8B10BIntervalNISOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         non idle sets encountered on an interface for a 
         particular interval. If the value of 
         c8B10BIntervalNonIdleSets
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCNonIdleSets, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 16 }
    
c8B10BIntervalHCNonIdleSets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B non-idle sets 
         encountered on this interface in a particular interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BIntervalEntry 17 }

c8B10BIntervalDataSets OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the value of the number of 8B10B data 
         code groups encountered on an interface for a particular
         interval. This object only shows the lower word value of 
         the counter.The high word value is given by
         c8B10BIntervalDSOverflow.
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCDataSets, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 18 }   

c8B10BIntervalDSOverflow OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "This object gives the higher word value the number of 8B10B
         data code groups encountered on an interface for a 
         particular interval. If the value of 
         c8B10BIntervalDataSets
         is greater than 4,294,967,295, the higher word value will
         be stored in this object.    
         
         SNMP v2c or v3 managers can directly use
         c8B10BIntervalHCDataSets, which is a 64 bit counter."
    ::= { c8B10BIntervalEntry 19 }    

c8B10BIntervalHCDataSets OBJECT-TYPE
    SYNTAX        Counter64 
    MAX-ACCESS    read-only        
    STATUS        current
    DESCRIPTION
        "The counter associated with the number of 8B10B data code 
         groups encountered on this interface in a particular interval.
         
         This is a High Capacity ( 64 bit ) counter."
    ::= { c8B10BIntervalEntry 20 }

c8B10BIntervalValidData OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This variable indicates if the data for this
         interval is valid."
   ::= { c8B10BIntervalEntry 21 }
   
   
-- MIB Conformance Statements

cerentMsDwdmMIBConformance OBJECT IDENTIFIER ::=
    { cerentRequirements 30 }

cerentMsDwdmMIBCompliances OBJECT IDENTIFIER ::=
    { cerentMsDwdmMIBConformance 1 }

cerentMsDwdmMIBGroups OBJECT IDENTIFIER ::=
    { cerentMsDwdmMIBConformance 2 }

cerentMsDwdmMIBCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The compliance statement for platforms that monitor the  
        operating status and FEC/OTN with respect to error
        counters, for the physical layer."
    MODULE -- this module
        MANDATORY-GROUPS {
            cerentMsDwdmIfConfigGroup
        }

    OBJECT    cMsDwdmIfConfigProtocol
        MIN-ACCESS    read-only
        DESCRIPTION
            "Write access is not required."

    OBJECT    cMsDwdmIfConfigDataRate
        MIN-ACCESS    read-only
        DESCRIPTION
            "Write access is not required."
            
    OBJECT    cMsDwdmIfConfigLoopback
        MIN-ACCESS    read-only
        DESCRIPTION
            "Write access is not required."
            
    OBJECT   cMsDwdmIfConfigWavelength 
        MIN-ACCESS    read-only
        DESCRIPTION
            "Write access is not required."
            
    OBJECT   cMsDwdmIfConfigOtnStatus 
        MIN-ACCESS    read-only
        DESCRIPTION
            "Write access is not required."
            
    OBJECT   cMsDwdmIfConfigFECStatus 
        MIN-ACCESS    read-only
        DESCRIPTION
            "Write access is not required."



    ::= { cerentMsDwdmMIBCompliances 1 }

--
-- units of conformance
--
cerentMsDwdmIfConfigGroup OBJECT-GROUP
    OBJECTS {
    cMsDwdmIfConfigProtocol,
    cMsDwdmIfConfigDataRate,
    cMsDwdmIfConfigLoopback,
    cMsDwdmIfConfigWavelength,
    cMsDwdmIfConfigOtnStatus,
    cMsDwdmIfConfigFECStatus,
    cMsDwdmIfOpticsValidIntervals,
    cMsDwdmIfOTNValidIntervals,
    cMsDwdmIfFECValidIntervals,
    cMsDwdmIfConfigFECMode
    }
    STATUS  current
    DESCRIPTION
        "The collection of objects to allow configurations and give
        information related to the physical layer characteristics
        of an interface."
    ::= { cerentMsDwdmMIBGroups 1 }

cerentMsDwdmOtnGroup OBJECT-GROUP
    OBJECTS {
    cMsDwdmOtnThreshFC,
    cMsDwdmOtnThreshES,
    cMsDwdmOtnThreshSES,
    cMsDwdmOtnThreshUAS,
    cMsDwdmOtnThreshBBE,   
    cMsDwdmOtnCurrentFC,
    cMsDwdmOtnCurrentES, 
    cMsDwdmOtnCurrentSES, 
    cMsDwdmOtnCurrentUAS,
    cMsDwdmOtnCurrentBBE, 
    cMsDwdmOtnCurrentESR,  
    cMsDwdmOtnCurrentSESR,  
    cMsDwdmOtnCurrentBBER,
    cMsDwdmOtnIntervalFC,
    cMsDwdmOtnIntervalES,
    cMsDwdmOtnIntervalSES,
    cMsDwdmOtnIntervalUAS,
    cMsDwdmOtnIntervalBBE,
    cMsDwdmOtnIntervalESR,
    cMsDwdmOtnIntervalSESR,
    cMsDwdmOtnIntervalBBER,
    cMsDwdmOtnIntervalValidData
      
    }
    STATUS current
    DESCRIPTION
        "The objects used for monitoring the OTN error counters."  
    ::= { cerentMsDwdmMIBGroups 2 }

cerentMsDwdmFECGroup OBJECT-GROUP
    OBJECTS {
    cMsDwdmFECThreshBitErrCor,  
    cMsDwdmFECThreshByteErrCor,  
    cMsDwdmFECThreshZeroErrDet,  
    cMsDwdmFECThreshOneErrDet,  
    cMsDwdmFECThreshUncorWords,  
    cMsDwdmFECCurrentBitErrCor,
    cMsDwdmFECCurrentByteErrCor,
    cMsDwdmFECCurrentZeroErrDet,
    cMsDwdmFECCurrentOneErrDet,
    cMsDwdmFECCurrentUncorWords,
    cMsDwdmFECIntervalBitErrCor,  
    cMsDwdmFECIntervalByteErrCor,  
    cMsDwdmFECIntervalZeroErrDet,  
    cMsDwdmFECIntervalOneErrDet,  
    cMsDwdmFECIntervalUncorWords,
    cMsDwdmFECIntervalValidData
    }
    STATUS current
    DESCRIPTION
        "The objects used for monitoring the FEC error counters."  
    ::= { cerentMsDwdmMIBGroups 3 }

cMsDwdmIfTransportGroup OBJECT-GROUP
    OBJECTS {
    -- cMsDwdmIfTransportRingDirection, 
 	cMsDwdmIfTransportPortRule,
 	cMsDwdmIfTransportPower,
 	cMsDwdmIfTransportReferencePower,
 	cMsDwdmIfTransportCalibratedPower,
 	cMsDwdmIfTransportInsertionLoss,
 	cMsDwdmIfTransportLaserStatus,
 	cMsDwdmIfTransportAmplifierMode,
 	cMsDwdmIfTransportGain,
 	cMsDwdmIfTransportReferenceTilt,
 	cMsDwdmIfTransportCalibratedTilt,
 	cMsDwdmIfTransportDCULoss,
        cMsDwdmIfTransportExpectedGain,
        cMsDwdmIfTransportOSRI,
        cMsDwdmIfTransportSideIdentifier
  
    }
    STATUS  current
    DESCRIPTION
        "The collection of objects to allow configurations and give
        information related to the optical transportp hysical layer 
        characteristics of an interface."
    ::= { cerentMsDwdmMIBGroups 5 }

cMsDwdmIfMultiplexSectionTableGroup OBJECT-GROUP
    OBJECTS {
    -- cMsDwdmIfMultiplexSectionRingDirection, 
    cMsDwdmIfMultiplexSectionPortRule,
    cMsDwdmIfMultiplexSectionPower,
    cMsDwdmIfMultiplexSectionReferencePower,
    cMsDwdmIfMultiplexSectionCalibratedPower,
    cMsDwdmIfMultiplexSectionInsertionLoss,
    cMsDwdmIfMultiplexSectionActualBand,
    cMsDwdmIfMultiplexSectionExpectedBand,
    cMsDwdmIfMultiplexSectionSideIdentifier
    }
    STATUS  current
    DESCRIPTION
        "The collection of objects to allow configurations and give
        information related to the optical multiplex section
        physical layer characteristics of an interface."
    ::= { cerentMsDwdmMIBGroups 6 }

cMsDwdmIfChannelGroup OBJECT-GROUP
    OBJECTS {
    -- cMsDwdmIfChannelRingDirection,
    cMsDwdmIfChannelPortRule,
    cMsDwdmIfChannelPower,
    cMsDwdmIfChannelReferencePower,
    cMsDwdmIfChannelCalibratedPower,
    cMsDwdmIfChannelInsertionLoss,
    cMsDwdmIfChannelActualWavelength,
    cMsDwdmIfChannelExpectedWavelength,
    cMsDwdmIfChannelSideIdentifier
    }
    STATUS  current
    DESCRIPTION
        "The collection of objects to allow configurations and give
        information related to the optical channel physical layer 
        characteristics of an interface."
    ::= { cerentMsDwdmMIBGroups 7 }
      
cerent8B10BThreshGroup OBJECT-GROUP
    OBJECTS {
    c8B10BThreshInvalidPkts,
    c8B10BThreshValidPkts,
    c8B10BThreshIdleSets,
    c8B10BThreshNonIdleSets,
    c8B10BThreshDataSets,
    c8B10BThreshCodeViols,
    c8B10BIntervalCodeViols,
    c8B10BThreshIPOverflow,
    c8B10BThreshVPOverflow,
    c8B10BThreshISOverflow,
    c8B10BThreshNISOverflow,
    c8B10BThreshDSOverflow,
    c8B10BThreshCVOverflow,
    c8B10BThreshHCInvalidPkts,
    c8B10BThreshHCValidPkts,
    c8B10BThreshHCIdleSets,
    c8B10BThreshHCNonIdleSets,
    c8B10BThreshHCDataSets,
    c8B10BThreshHCCodeViols
    }
    STATUS  current
    DESCRIPTION
        "The collection of objects used to set the thresholds
         on 8B10B counters."
    ::= { cerentMsDwdmMIBGroups 8 }

cerent8B10BStatsGroup OBJECT-GROUP
    OBJECTS {
    c8B10BCurrentCodeViols,          
    c8B10BCurrentCVOverflow,             
    c8B10BCurrentHCCodeViols,            
    c8B10BCurrentValidPkts,               
    c8B10BCurrentVPOverflow,             
    c8B10BCurrentHCValidPkts,             
    c8B10BCurrentInvalidPkts,                
    c8B10BCurrentIPOverflow,             
    c8B10BCurrentHCInvalidPkts,              
    c8B10BCurrentIdleSets,               
    c8B10BCurrentISOverflow,             
    c8B10BCurrentHCIdleSets,             
    c8B10BCurrentNonIdleSets,            
    c8B10BCurrentNISOverflow,            
    c8B10BCurrentHCNonIdleSets,          
    c8B10BCurrentDataSets,               
    c8B10BCurrentDSOverflow,
    c8B10BCurrentHCDataSets,
    c8B10BIntervalHCCodeViols,
    c8B10BIntervalValidPkts,
    c8B10BIntervalHCValidPkts,
    c8B10BIntervalInvalidPkts,
    c8B10BIntervalHCInvalidPkts,
    c8B10BIntervalIdleSets,
    c8B10BIntervalHCIdleSets,
    c8B10BIntervalNonIdleSets,
    c8B10BIntervalHCNonIdleSets,
    c8B10BIntervalDataSets,
    c8B10BIntervalHCDataSets,
    c8B10BIntervalCVOverflow,
    c8B10BIntervalVPOverflow,
    c8B10BIntervalIPOverflow,
    c8B10BIntervalISOverflow,
    c8B10BIntervalNISOverflow,
    c8B10BIntervalDSOverflow,
    c8B10BIntervalValidData
    }
    STATUS  current
    DESCRIPTION
        "The collection of objects used to monitor the 8B10B
        error counters."
    ::= { cerentMsDwdmMIBGroups 9 }
    
END