path: root/MIBS/cisco/CISCO-WAN-OPTIMIZATION-MIB

-- *****************************************************************
-- CISCO-WAN-OPTIMIZATION-MIB.my : A MIB for WAN Optimization
-- Features
--   
-- October 2010, Chetan K Patel, Pooja Subramanya.
--   
-- Copyright (c) 2010-2016 by cisco Systems Inc.
-- All rights reserved.
--   
-- *****************************************************************

CISCO-WAN-OPTIMIZATION-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    NOTIFICATION-TYPE,
    Counter64,
    Unsigned32,
    Gauge32,
    Integer32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    NOTIFICATION-GROUP,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    TruthValue,
    TimeInterval,
    DateAndTime,
    TimeStamp
        FROM SNMPv2-TC
    CounterBasedGauge64
        FROM HCNUM-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    CiscoMilliSeconds,
    TimeIntervalSec,
    Unsigned64
        FROM CISCO-TC
    cpmCPUTotalMonIntervalValue
        FROM CISCO-PROCESS-MIB
    ciscoMgmt
        FROM CISCO-SMI;


ciscoWanOptimizationMIB MODULE-IDENTITY
    LAST-UPDATED    "201605220000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service
            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS
            E-mail: cs-waas@cisco.com, cs-waas-express@cisco.com"
    DESCRIPTION
        "This MIB is for managing Wide Area Network (WAN) Optimization
        systems. The objective of WAN optimization system is to reduce
        as much traffic as possible on WAN link and improve the
        application response time for various applications, which gets
        affected due to bandwidth, packet loss, congestion and latency
        limitations of WAN link. WAN optimization system is generally
        peer based system. They are located at both end of WAN link and
        peer with each other to perform optimization. This MIB provides
        instrumentation for monitoring statistics for various features
        implemented for WAN optimization. WAN optimization features
        includes TCP protocol optimizations and various Application
        Optimizers (AOs). AOs include SMB AO, HTTP AO, CIFS AO, NFS AO,
        MAPI AO, VIDEO AO, SSL AO and EPM AO.

        Acronyms and Terminology used in this MIB are:
        AO               : Application Optimizer
        TFO              : Traffic Flow Optimization
        SMB              : Server Message Block
        CIFS             : Common Internet File System
        HTTP             : Hyper Text Transfer Protocol
        NFS              : Network File System
        SSL              : Secure Socket Layer
        MAPI             : Messaging Application Programming Interface
        EPM              : End Point Mapper
        RA               : Read Ahead
        MD               : Meta Data
        PT               : Pass Through
        AD               : Auto Discovery
        RTT              : Round Trip Time
        Conn             : Connections
        File Server      : SMB/CIFS file server
        peer             : It refers to peer WAN optimization system 
                           located on other end of WAN and registered 
                           with this device to optimize the traffic.
        SharePoint       : SharePoint is a Microsoft Application that 
                           provides a collaborative environment for 
                           using Microsoft Office and related 
                           applications. Typical deployments of 
                           Microsoft SharePoint use one or more        
                           SharePoint servers in a server farm for 
                           scalability. The actual data for the various
                           documents, etc. are usually stored in a 
                           backend database. The SharePoint server(s) 
                           communicate with the backend database using 
                           SharePoint Back-end protocols. Clients 
                           (either Microsoft Office Applications like 
                           Word, Excel, PowerPoint or Web Browsers) 
                           typically connect to the SharePoint server 
                           and communicate using SOAP over HTTP.
        Fast Connections : End to end connections which uses existing 
                           TCP connection over WAN and reconstructs
                           only LAN connection is fast connection.
        DRE              : Data Redundancy Elimination.
        LZ               : Lemple-Ziv data compression.
        PLZ             : Persistent Lemple-Ziv data compression."
    REVISION        "201605220000Z"
    DESCRIPTION
        "Edited descriptions of CwoDreCacheStatus object.
        Changed Max-Access of cwoDrePerfStatsEncodeCompressionRatio and
        cwoDrePerfStatsDecodeCompressionRatio objects."
    REVISION        "201605180000Z"
    DESCRIPTION
        "Added cwoAoHttpxStatsAKC table for HTTP Akamai Cache objects.
        Added cwoAoDre table for DRE objects."
    REVISION        "201511300000Z"
    DESCRIPTION
        "Deprecated cwoAoVideoxStats and cwoAoCifsxStats tables as all
        the objects in them are deprecated."
    REVISION        "201305230000Z"
    DESCRIPTION
        "Added the below counters in cwoAoSmbxStats table Signed SMB
        Bytes Stats enhancement feature
        cwoAoSmbxStatsRdL4SignWANBytes
        cwoAoSmbxStatsWrL4SignWANBytes
        cwoAoSmbxStatsRdSignLANBytes
        cwoAoSmbxStatsWrSignLANBytes"
    REVISION        "201212130000Z"
    DESCRIPTION
        "Added the below new counters which display SharePoint AO
        statistics in cwoAoHttpxStats group.
        cwoAoHttpxStatsTotalSPSessions
        cwoAoHttpxStatsTotalSPPFSessions
        cwoAoHttpxStatsTotalSPPFObjects
        cwoAoHttpxStatsTotalSPRTTSaved
        cwoAoHttpxStatsTotalSPPFMissTime

        Added the below new counters in cwoAoCifsxStats group to support
        the CIFS Atkins feature.
        cwoAoCifsxStatsFFTotalReqs
        cwoAoCifsxStatsFFRemoteReqs
        cwoAoCifsxStatsFFLocalRespTime
        cwoAoCifsxStatsFFRemoteRespTime
        cwoAoCifsxStatsDirResources"
    REVISION        "201203050000Z"
    DESCRIPTION
        "(1) Added cwoAoStatsLoadStatus and cwoAoStatsBwOpt in
        cwoAoStatsTable
        (2) Added cwoAoSmbStatsBwOpt in cwoAoSmbxstats Group
        (3) Added cwoAoHttpxStats - Statistics Group for HTTP AO
        (4) Added cwoAoMapixStats - Statistics Group for MAPI AO
        (5) Added cwoAoNfsxStats - Statistics Group for NFS AO
        (6) Added cwoAoVideoxStats - Statistics Group for Video AO
        (7) Added cwoAoCifsxstats - Statistics Group for CIFS AO
        (8) Added cwoApp - Gorup which includes objects for
        Applications associated with AOs.
        (9) Added cwoPmap - Group which includes objects for 
             policy-map.
        (10) Added cwoCmap - Group which includes objects for 
         class-maps associated with active policy-map.
        (11) Addes cwoTfoStatsLoadStatus in cswTfoStats group"
    REVISION        "201104190000Z"
    DESCRIPTION
        "New License Notification Group has been added."
    REVISION        "201010260000Z"
    DESCRIPTION
        "Initial version of this MIB."
    ::= { ciscoMgmt 762 }



CwoHttpAKCPrepStatus ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Represents various Akamai cache preposition task status of a
        HTTP application optimizer.

        unknown(1)    : The prepositioning task is in unknown state.

        scheduled(2)  : The prepositioning task is scheduled to run.

        disabled(3)   : The prepositioning task is disabled.

        success(4)    : The prepositioning task completed successfully.

        error(5)      : The prepositioning task has an error."
    SYNTAX          INTEGER  {
                        unknown(1),
                        scheduled(2),
                        disabled(3),
                        success(4),
                        error(5)
                    }

CwoDreCacheStatus ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Represents various DRE cache status of an application
        optimizer.

        notUsable(1)    : This state indicates that DRE cache is    
                          currently not usable/accessible   
                          (eg.,when DRE partition is not    
                          mounted/available).

        initializing(2) : This state indicates that DRE cache is   
                          getting initialized.

        usable(3)       : This state indicates that DRE cache is   
                          accessible and in usable condition.

        tempFailed(4)   : This state indicates that DRE cache is    
                          temporarily not available due to internal
                          errors.

        failed(5)       : This state indicates that DRE cache    
                          initialization failed."
    SYNTAX          INTEGER  {
                        notUsable(1),
                        initializing(2),
                        usable(3),
                        temporarilyFailed(4),
                        failed(5)
                    }

CwoAoName ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Represents the name of an Application Optimizer supported by
        this system."
    SYNTAX          OCTET STRING (SIZE (1..96))

CwoAoOperationalState ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Represents Various operational states of an Application
        Optimizer.

        shutdown       : This state indicates that an AO is in shutdown
                         state.

        initializing   : This state indicates that an AO is getting    
                         Initialized.

        normalRunning  : This state indicates that an AO is running    
                         normally.

        normalDisabled : This state indicates that an AO is in normal 
                         disabled.

        licenseExpired : This state indicates that license for an AO is
                         expired.

        cleaningup     : This state indicates that an AO is in cleaning
                         up state.

        error          : This state indicates that some error has  
                         happened in AO operation."
    SYNTAX          INTEGER  {
                        shutdown(1),
                        initializing(2),
                        normalRunning(3),
                        normalDisabled(4),
                        licenseExpired(5),
                        cleaningup(6),
                        error(7)
                    }

CwoLoadStates ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Represents load status of the system or feature.

        unknown    : This state is applicable when feature is not
                     active or disabled.
        green      : This state indicates that the feature is operating 
                     normally, within acceptable load limits.  
        yellow     : This state indicates that the feature is       
                     overloaded, and new connections received by it
                     may not get optimized.
        red        : This state indicates that the feature is not    
                     healthy, and existing as well as new
                     connections received by it may not get optimized."
    SYNTAX          INTEGER  {
                        unknown(1),
                        green(2),
                        yellow(3),
                        red(4)
                    }

CwoTypes ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Represents various types related to wan optimization system.
        One such use is types of class-map and policy-map for wan
        optimization syatem.

        waas           : It is used for wan optimization functionality.
        appnav         : It is used for application traffic redirection 
                         to wan optimization systems."
    SYNTAX          INTEGER  {
                        waas(1),
                        appnav(2)
                    }
-- Textual Conventions definition will be defined before this line

ciscoWanOptimizationMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIB 0 }

ciscoWanOptimizationMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIB 1 }

-- Conformance Information

ciscoWanOptimizationMIBConform  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIB 3 }

ciscoWanOptimizationMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBConform 1 }

-- General WAN Optimization Group. It contains general statistics
-- related to WAN Optimization system.

cwoGeneral  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBObjects 1 }

-- Traffic Flow Optimization Group.

cwoTfo  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBObjects 2 }

-- Statistics for AOs.

cwoAo  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBObjects 3 }

-- Application Group

cwoApp  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBObjects 4 }

-- Policy map Group

cwoPmap  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBObjects 5 }

-- Class map Group

cwoCmap  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBObjects 6 }

cwoDre  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBObjects 7 }


cwoGeneralActivePeers OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "number of peers"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of active peers connected
        with this device for WAN optimization." 
    ::= { cwoGeneral 1 }

cwoGeneralMaxActivePeers OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains maximum number of peers that this device
        can peer with for WAN optimization." 
    ::= { cwoGeneral 2 }

cwoGeneralCpuThrottleHigh OBJECT-TYPE
    SYNTAX          Unsigned32 (1..100)
    UNITS           "percent"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object contains high threshold (percentage) value of CPU
        usage of system when WAN optimization feature is running. The
        current CPU utilization, stored in cpmCPUTotalMonIntervalValue,
        is compared against this value. A cwoCpuThrottlingOn
        notification is generated whenever cpmCPUTotalMonIntervalValue
        exceeds cwoGeneralCpuThrottleHigh for
        cwoGeneralCpuThrottlPeriod." 
    ::= { cwoGeneral 3 }

cwoGeneralCpuThrottleLow OBJECT-TYPE
    SYNTAX          Unsigned32 (1..100)
    UNITS           "percent"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object contains low threshold (percentage) value of CPU
        usage of system when WAN optimization feature is running. The 
        current CPU utilization, stored in cpmCPUTotalMonIntervalValue,
        is
        compared against this value. A cwoCpuThrottlingOff notification
        is generated if a prior cwoCpuThrottlingOn notification was 
        generated, and the current value of cpmCPUTotalMonIntervalValue
        is below cwoGeneralCpuThrottleLow for
        cwoGeneralCpuThrottlPeriod.

        Note that the value of cwoGeneralCpuThrottleLow must be less
        than
        or equal to cwoGeneralCpuThrottleHigh." 
    ::= { cwoGeneral 4 }

cwoGeneralCpuThrottlPeriod OBJECT-TYPE
    SYNTAX          TimeInterval
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This Object indicates CPU throttling observation period. The
        value of the CPU utilization for this period is stored in 
        cpmCPUTotalMonIntervalValue. If the value of 
        cpmCPUTotalMonIntervalValue object is above  
        cwoGeneralCPUThrottleHigh, a cwoCPUThrottlingOn notification 
        is sent. If it is below cwoGeneralCPUThrottleLow, a 
        cwoCPUThrottlingOff notification is sent to the NMS." 
    ::= { cwoGeneral 5 }
-- Statistics of TFO

cwoTfoStats  OBJECT IDENTIFIER
    ::= { cwoTfo 1 }


cwoTfoStatsTotalOptConn OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of TCP connections optimized
        since TFO was started or its statistics were last reset." 
    ::= { cwoTfoStats 1 }

cwoTfoStatsActiveOptConn OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of currently active TCP connections
        getting optimized." 
    ::= { cwoTfoStats 2 }

cwoTfoStatsMaxActiveConn OBJECT-TYPE
    SYNTAX          Unsigned64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains maximum number of active TCP connections
        that this device can optimize." 
    ::= { cwoTfoStats 3 }

cwoTfoStatsActiveOptTCPPlusConn OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of active TCP connections going
        through TCP plus other optimization." 
    ::= { cwoTfoStats 4 }

cwoTfoStatsActiveOptTCPOnlyConn OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of active connections going through
        only TCP optimization." 
    ::= { cwoTfoStats 5 }

cwoTfoStatsActiveOptTCPPrepConn OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of current active TCP connections
        that were originated by an accelerator to acquire data in
        anticipation of its future use." 
    ::= { cwoTfoStats 6 }

cwoTfoStatsActiveADConn OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of current active TCP connections
        in the auto-discovery state." 
    ::= { cwoTfoStats 7 }

cwoTfoStatsReservedConn OBJECT-TYPE
    SYNTAX          Unsigned64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of TCP connections reserved for the
        MAPI accelerator." 
    ::= { cwoTfoStats 8 }

cwoTfoStatsPendingConn OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of TCP connections, which are
        pending in queue of connections to be optimized." 
    ::= { cwoTfoStats 9 }

cwoTfoStatsActivePTConn OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of active Pass Through TCP
        connections. Connections which are not selected for optimization
        are called Pass Through." 
    ::= { cwoTfoStats 10 }
cwoDreCacheStats  OBJECT IDENTIFIER
    ::= { cwoDre 1 }

cwoDrePerfStats  OBJECT IDENTIFIER
    ::= { cwoDre 2 }


cwoDreCacheStatsStatus OBJECT-TYPE
    SYNTAX          CwoDreCacheStatus
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object describes the status of the portion of the disk
        that is meant for DRE cache." 
    ::= { cwoDreCacheStats 1 }

cwoDreCacheStatsAge OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the age of the oldest data present in the
        DRE cache. For example, let us say that the portion of the disk
        space allocated for DRE cache is 1GB and it is full. Now, if
        new data is written onto this cache, then it would replace the
        oldest data in the cache in First-In-First-Out (FIFO) order.
        This object will specify what is the oldest data now present in
        the cache. It takes the format of <x>d<x>h<x>m, where 'x' is an
        integer number. For example, 6d20h30m means that the oldest
        data's age is 6 days, 20 hours and 30 minutes." 
    ::= { cwoDreCacheStats 2 }

cwoDreCacheStatsTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "MB"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of available disk space
        for DRE cache. For example,  if the total disk space is 202 GB
        and let us say that 20% of this disk space is allocated for DRE
        cache, then this would mean that 40GB (40960 MB) out of the
        total disk space is allocated for DRE cache." 
    ::= { cwoDreCacheStats 3 }

cwoDreCacheStatsUsed OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of DRE disk space
        currently used out of the total space allocated for DRE cache.
        For example, if the disk space allocated for DRE cache is 
        972798MB and if this object indicates 1%, it means that 9727 MB
        is used and remaining approximate 963071 MB of disk space is
        free." 
    ::= { cwoDreCacheStats 4 }

cwoDreCacheStatsDataUnitUsage OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "MB"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates DRE disk space currently used by data
        unit. DRE stores the actual data as data units in data block
        and the metadata (chuck signature) in signature block." 
    ::= { cwoDreCacheStats 5 }

cwoDreCacheStatsReplacedOneHrDataUnit OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "MB"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the amount of data unit replaced in the
        last one hour in DRE cache. DRE stores the actual data as data
        units in the cache data block. If new data units have to be
        stored in the cache, the older data units in the cache are
        evicted in First-In-First-Out (FIFO) order. This object would
        also indicate how much new data units have been stored in the
        DRE cache in the past one hour." 
    ::= { cwoDreCacheStats 6 }

cwoDreCacheStatsDataUnitAge OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the age of oldest data unit  in the data
        block. DRE stores the actual data as data units in the data
        block and the metadata (chuck signature) in signature block. If
        new data unit should be written to the data block when it is
        full, then the oldest data unit currently present in the data
        block will be evicted.  So this object would indicate the age
        of the oldest data unit present in the DRE cache. It takes the
        format of <x>d<x>h<x>m, where 'x' is an integer number. For
        example, 6d20h30m means that the oldest data's age is 6 days, 20
        hours and 30 minutes." 
    ::= { cwoDreCacheStats 7 }

cwoDreCacheStatsSigblockUsage OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "MB"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates DRE disk space currently used by sigblock
        or signature block. DRE stores the actual data as data units in
        cache data block and the metadata (chuck signature) in
        signature block." 
    ::= { cwoDreCacheStats 8 }

cwoDreCacheStatsReplacedOneHrSigblock OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "MB"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the amount of signatures replaced in last
        one hour in sigblock. DRE stores the metadata (chuck signature)
        in signature block of DRE cache. If new signatures have to be
        stored in the cache, the older signatures in the sigblock are
        evicted in First-In-First-Out (FIFO) order. This object would
        also indicate how much new signatures have been stored in the
        DRE cache sigblock in the past one hour." 
    ::= { cwoDreCacheStats 9 }

cwoDreCacheStatsSigblockAge OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the age of oldest signature in the
        sigblock. DRE stores the actual data as data units in the data
        block and the metadata (chuck signature) in signature block. 
        If a new signature should be written to the sigblock when it is
        full, then the oldest signature currently present in the
        sigblock will be evicted. So this object would indicate the age
        of the oldest signature present in the DRE cache. It takes the
        format of <x>d<x>h<x>m, where 'x' is an integer number. For
        example, 6d20h30m means that the oldest data's age is 6 days, 20
        hours and 30 minutes." 
    ::= { cwoDreCacheStats 10 }

cwoDrePerfStatsEncodeCompressionRatio OBJECT-TYPE
    SYNTAX          Gauge32 (1..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total compression ratio provided by
        all the DRE components - DRE, LZ and PLZ (if applicable), during
        the encoding process. It is the ratio of the number of bytes
        entering the DRE module (from LAN side) and the number of bytes
        exiting the DRE module (from WAN side). This object indicates
        the value that is calculated since the last time the counter was
        cleared. The calculation is not based on per-connection or
        per-peer basis." 
    ::= { cwoDrePerfStats 1 }

cwoDrePerfStatsEncodeCompressionLatency OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "ms"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the processing latency that is introduced
        by DRE/LZ/PLZ processes during the encoding of data that is
        coming into the DRE module.
        The encoding process comprises of dividing the input data into
        chunks and calculating the signature of every chunk. This
        encoding process would add certain latency. Then the LZ
        compression would add further latency. This object indicates
        the value that is calculated since the last time the counter was
        cleared. The calculation is not based on per-connection or
        per-peer basis." 
    ::= { cwoDrePerfStats 2 }

cwoDrePerfStatsEncodeAvgMsgSize OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the average size of all the messages
        handled by DRE during encoding (i.e., for all the messages
        received from the LAN side). The message size is an important
        factor in performance of DRE. This object indicates the value
        that is calculated since the last time the counter was cleared.
        The calculation is not based on per-connection or per-peer
        basis." 
    ::= { cwoDrePerfStats 3 }

cwoDrePerfStatsDecodeCompressionRatio OBJECT-TYPE
    SYNTAX          Gauge32 (1..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total compression ratio provided by
        all the DRE components - DRE, LZ and PLZ (if applicable),
        during the decoding process. It is the ratio of the number of
        bytes entering the DRE module (from WAN side) and the number of
        bytes exiting the DRE module (from LAN side). This object
        indicates the value that is calculated since the last time the
        counter was cleared. The calculation is not based on
        per-connection or per-peer basis." 
    ::= { cwoDrePerfStats 4 }

cwoDrePerfStatsDecodeCompressionLatency OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "ms"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the processing latency that is introduced
        by DRE/LZ/PLZ processes during the decoding of data that is
        coming into the DRE module.
        The LZ decompression (for applicable data) would add certain
        latency. Then the decoding process that involves a lot of
        signature look-up for disk IO and data fetch from the data unit
        for recreation of original data, would add further latency.
        This object indicates the value that is calculated since the
        last
        time the counter was cleared. The calculation is not based on
        per-connection or per-peer basis." 
    ::= { cwoDrePerfStats 5 }

cwoDrePerfStatsDecodeAvgMsgSize OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the average size of all the messages
        handled by DRE during decoding (i.e., for all the messages
        received from the WAN side). The message size is an important
        factor in performance of DRE. This object indicates the value
        that is calculated since the last time the counter was cleared.
        The calculation is not based on per-connection or per-peer
        basis." 
    ::= { cwoDrePerfStats 6 }

cwoTfoStatsTotalNormalClosedConn OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of optimized TCP connections
        which were closed normally since TFO was started or its
        statistics were last reset." 
    ::= { cwoTfoStats 11 }

cwoTfoStatsResetConn OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of optimized TCP connections,
        which are reset since TFO was started or its statistics were
        last reset." 
    ::= { cwoTfoStats 12 }

cwoTfoStatsLoadStatus OBJECT-TYPE
    SYNTAX          CwoLoadStates
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the load status of Traffic Flow Optimizer
        (TFO)." 
    ::= { cwoTfoStats 13 }
-- Statistics table of AO

cwoAoStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CwoAoStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table gives statistics of Application Optimizers."
    ::= { cwoAo 1 }

cwoAoStatsEntry OBJECT-TYPE
    SYNTAX          CwoAoStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry containing statistics for particular Application
        optimizer. An entry will be created during system startup and
        will include AOs, which are supported by this system."
    INDEX           { cwoAoStatsName } 
    ::= { cwoAoStatsTable 1 }

CwoAoStatsEntry ::= SEQUENCE {
        cwoAoStatsName                CwoAoName,
        cwoAoStatsIsConfigured        TruthValue,
        cwoAoStatsIsLicensed          TruthValue,
        cwoAoStatsOperationalState    CwoAoOperationalState,
        cwoAoStatsStartUpTime         DateAndTime,
        cwoAoStatsLastResetTime       DateAndTime,
        cwoAoStatsTotalHandledConns   Counter32,
        cwoAoStatsTotalOptConns       Counter32,
        cwoAoStatsTotalHandedOffConns Counter32,
        cwoAoStatsTotalDroppedConns   Counter32,
        cwoAoStatsActiveOptConns      Gauge32,
        cwoAoStatsPendingConns        Gauge32,
        cwoAoStatsMaxActiveOptConns   Unsigned32,
        cwoAoStatsLoadStatus          CwoLoadStates,
        cwoAoStatsBwOpt               Gauge32
}

cwoAoStatsName OBJECT-TYPE
    SYNTAX          CwoAoName
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object represents name of the AO." 
    ::= { cwoAoStatsEntry 1 }

cwoAoStatsIsConfigured OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the AO is configured or not. If
        AO is not configured then the operational state
        (cwoAoStatsOperationalState) of AO would be 'shutdown'." 
    ::= { cwoAoStatsEntry 2 }

cwoAoStatsIsLicensed OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether license for the AO is valid or
        not. If License for AO is not valid then operational state
        (cwoAoStatsOperationalState) of AO would be 'shutdown'." 
    ::= { cwoAoStatsEntry 3 }

cwoAoStatsOperationalState OBJECT-TYPE
    SYNTAX          CwoAoOperationalState
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates operational state of the AO. If AO is not
        configured or license is not valid for this AO then operational
        state of AO would be 'shutdown'." 
    ::= { cwoAoStatsEntry 4 }

cwoAoStatsStartUpTime OBJECT-TYPE
    SYNTAX          DateAndTime
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains date and time when AO was started. This
        object will hold NULL value when AO is in shutdown state." 
    ::= { cwoAoStatsEntry 5 }

cwoAoStatsLastResetTime OBJECT-TYPE
    SYNTAX          DateAndTime
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains date and time when statistics of AO were
        set to reset last time. When statistics of AO set to reset then
        all statistics counters will also set to reset. This object will
        hold NULL value when AO is in shutdown state." 
    ::= { cwoAoStatsEntry 6 }

cwoAoStatsTotalHandledConns OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of connections handled by AO
        since it was started or its statistics were last reset." 
    ::= { cwoAoStatsEntry 7 }

cwoAoStatsTotalOptConns OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of connections optimized by
        AO since it was started or its statistics were last reset." 
    ::= { cwoAoStatsEntry 8 }

cwoAoStatsTotalHandedOffConns OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of connections handed off to
        Generic optimization by AO since it was started or its
        statistics last reset." 
    ::= { cwoAoStatsEntry 9 }

cwoAoStatsTotalDroppedConns OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of connections dropped by AO
        since it was started or its statistics were last reset." 
    ::= { cwoAoStatsEntry 10 }

cwoAoStatsActiveOptConns OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of active connections which are
        getting optimized by AO." 
    ::= { cwoAoStatsEntry 11 }

cwoAoStatsPendingConns OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of connections currently pending in
        queue of connections to be optimized by AO." 
    ::= { cwoAoStatsEntry 12 }

cwoAoStatsMaxActiveOptConns OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains maximum number of active TCP connections
        that AO can optimize." 
    ::= { cwoAoStatsEntry 13 }

cwoAoStatsLoadStatus OBJECT-TYPE
    SYNTAX          CwoLoadStates
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the load status of an AO." 
    ::= { cwoAoStatsEntry 14 }

cwoAoStatsBwOpt OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage bandwidth optimization
        achieved due to optimizations done by an AO." 
    ::= { cwoAoStatsEntry 15 }
 

-- Extended statistics for SMB AO

cwoAoSmbxStats  OBJECT IDENTIFIER
    ::= { cwoAo 2 }


cwoAoSmbxStatsBytesReadCache OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of bytes read from SMB
        Application Optimizer cache (Read-ahead and Metadata cache)
        since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 1 }

cwoAoSmbxStatsBytesWriteCache OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of bytes written to SMB
        Application Optimizer cache (Read-ahead and Metadata) since it
        was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 2 }

cwoAoSmbxStatsBytesReadServer OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of bytes read from file
        servers by SMB Application Optimizer since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 3 }

cwoAoSmbxStatsBytesWriteServer OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of bytes written to file
        servers by SMB Application Optimizer since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 4 }

cwoAoSmbxStatsBytesReadClient OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of bytes read by SMB
        Application Optimizer clients since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 5 }

cwoAoSmbxStatsBytesWriteClient OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of bytes written by SMB
        Application optimizer clients since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 6 }

cwoAoSmbxStatsProcessedReqs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of requests processed by SMB
        Application Optimizer since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 7 }

cwoAoSmbxStatsActiveReqs OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of active requests getting
        processed by SMB Application Optimizer." 
    ::= { cwoAoSmbxStats 8 }

cwoAoSmbxStatsTotalTimedOutReqs OBJECT-TYPE
    SYNTAX          Unsigned64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of requests timed out in SMB
        Application Optimizer since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 9 }

cwoAoSmbxStatsTotalRemoteReqs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of SMB requests sent to
        remote file server since SMB AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 10 }

cwoAoSmbxStatsTotalLocalReqs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of SMB requests served
        locally by SMB Application Optimizer since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 11 }

cwoAoSmbxStatsRemoteAvgTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains average duration of time taken by SMB
        Application Optimizer to process all remote requests since it
        was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 12 }

cwoAoSmbxStatsLocalAvgTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains average duration of time taken by SMB
        Application Optimizer to process all local requests since it
        was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 13 }

cwoAoSmbxStatsRACacheHitCount OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains SMB Application Optimizer Read Ahead Cache
        hit count since SMB AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 14 }

cwoAoSmbxStatsMDCacheHitCount OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains SMB Application Optimizer Metadata cache
        hit count since SMB AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 15 }

cwoAoSmbxStatsRACacheHitRate OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains SMB Application Optimizer Read Ahead cache
        hit rate since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 16 }

cwoAoSmbxStatsMDCacheHitRate OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains SMB Application Optimizer Metadata cache
        hit rate since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 17 }

cwoAoSmbxStatsMaxRACacheSize OBJECT-TYPE
    SYNTAX          Unsigned64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains Maximum disk space that can be allocated
        for Read Ahead data in SMB Application Optimizer cache." 
    ::= { cwoAoSmbxStats 18 }

cwoAoSmbxStatsMaxMDCacheSize OBJECT-TYPE
    SYNTAX          Unsigned64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains maximum disk space that can be allocated
        for Metadata in SMB Application Optimizer cache." 
    ::= { cwoAoSmbxStats 19 }

cwoAoSmbxStatsMDCacheSize OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains current size of Metadata cache in SMB
        Application Optimizer." 
    ::= { cwoAoSmbxStats 20 }

cwoAoSmbxStatsRAEvictedAge OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains amount of time spent in the SMB
        Application Optimizer Read Ahead cache by the resource that was
        last evicted since last update. If this amount is too short or
        too long, it is recommended to modify the size of the cache." 
    ::= { cwoAoSmbxStats 21 }

cwoAoSmbxStatsRTT OBJECT-TYPE
    SYNTAX          TimeIntervalSec
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total round trip time for all SMB
        connections since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 22 }

cwoAoSmbxStatsTotalRespTimeSaving OBJECT-TYPE
    SYNTAX          TimeIntervalSec
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total response time saved due to SMB AO
        optimizations since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 23 }

cwoAoSmbxStatsOpenFiles OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "files"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains number of files currently opened by SMB
        Application Optimizer." 
    ::= { cwoAoSmbxStats 24 }

cwoAoSmbxStatsTotalFilesInRACache OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "files"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total number of files in SMB Application
        optimizer Read Ahead cache." 
    ::= { cwoAoSmbxStats 25 }

cwoAoSmbxStatsRdL4SignWANBytes OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains the total number of Layer 4 (L4) optimized
        signed bytes read from WAN by SMB Application Optimizer since
        the SMB Application Optimizer was started. L4 optimization
        comprises of TFO, DRE and LZ optimizations.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 26 }

cwoAoSmbxStatsWrL4SignWANBytes OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains the total number of Layer 4 (L4) optimized
        signed bytes written to WAN by SMB Application Optimizer since
        SMB Application Optimizer was started. L4 optimization comprises
        of TFO, DRE and LZ optimizations.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 27 }

cwoAoSmbxStatsRdSignLANBytes OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains the total number of signed bytes read from
        LAN by SMB Application Optimizer since the SMB Application
        Optimizer was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 28 }

cwoAoSmbxStatsWrSignLANBytes OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains the total number of original signed bytes
        written to LAN by SMB Application Optimizer since SMB
        Application Optimizer was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the SMB AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the SMB
        AO." 
    ::= { cwoAoSmbxStats 29 }
-- Extended statistics for HTTP AO

cwoAoHttpxStats  OBJECT IDENTIFIER
    ::= { cwoAo 3 }


cwoAoHttpxStatsTotalSavedTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total time saved due to optimizations
        done by HTTP AO since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the HTTP AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the HTTP
        AO." 
    ::= { cwoAoHttpxStats 1 }

cwoAoHttpxStatsTotalRTT OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total Round Trip Time (RTT) for all the
        connections going through HTTP AO since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the HTTP AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the HTTP
        AO." 
    ::= { cwoAoHttpxStats 2 }

cwoAoHttpxStatsTotalMDCMTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total time for Meta Data Cache Misses
        (MDCM) for HTTP AO since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the HTTP AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the HTTP
        AO." 
    ::= { cwoAoHttpxStats 3 }

cwoAoHttpxStatsEstSavedTime OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates percentage estimated time saved due to
        optimizations done by HTTP AO since it was started." 
    ::= { cwoAoHttpxStats 4 }

cwoAoHttpxStatsTotalSPSessions OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "sessions"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of SharePoint Optimized
        HTTP sessions. This counter is incremented for every
        session on which SharePoint optimization can be performed. An
        HTTP session is tagged as a SharePoint Session based on the
        information present in the HTTP request." 
    ::= { cwoAoHttpxStats 5 }

cwoAoHttpxStatsTotalSPPFSessions OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "sessions"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of SharePoint Pre-fetch
        optimized HTTP sessions. This counter is incremented
        for every session on which SharePoint pre-fetch optimization
        can be performed. An HTTP session is tagged as a SharePoint
        pre-fetch Session based on the information present in the HTTP
        request. A pre-fetch operation is one where the edge WAAS
        device fetches the next set of data (which it anticipates the
        client will request later) from the server based on the current
        HTTP Request information." 
    ::= { cwoAoHttpxStats 6 }

cwoAoHttpxStatsTotalSPPFObjects OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of pre-fetched objects
        served locally for SharePoint pre-fetch sessions. The edge WAAS
        device maintains a local cache where the pre-fetched responses
        are saved. This object is incremented whenever the SharePoint
        client request is served from the pre-fetch cache." 
    ::= { cwoAoHttpxStats 7 }

cwoAoHttpxStatsTotalSPRTTSaved OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object contains total Round Trip Time (RTT) saved due to
        SharePoint pre-fetch optimizations since SharePoint pre-fetch
        optimization was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the HTTP AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the HTTP
        AO." 
    ::= { cwoAoHttpxStats 8 }

cwoAoHttpxStatsTotalSPPFMissTime OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total time for SharePoint pre-fetch
        Cache Misses since SharePoint pre-fetch optimization  was
        started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the HTTP AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the HTTP
        AO." 
    ::= { cwoAoHttpxStats 9 }
cwoAoHttpxStatsAKC  OBJECT IDENTIFIER
    ::= { cwoAoHttpxStats 10 }

cwoAoHttpxStatsAKCBypassEntry  OBJECT IDENTIFIER
    ::= { cwoAoHttpxStatsAKC 1 }

cwoAoHttpxStatsAKCStdEntry  OBJECT IDENTIFIER
    ::= { cwoAoHttpxStatsAKC 2 }

cwoAoHttpxStatsAKCBasicEntry  OBJECT IDENTIFIER
    ::= { cwoAoHttpxStatsAKC 3 }

cwoAoHttpxStatsAKCAdvEntry  OBJECT IDENTIFIER
    ::= { cwoAoHttpxStatsAKC 4 }

cwoAoHttpxStatsAKCTotalEntry  OBJECT IDENTIFIER
    ::= { cwoAoHttpxStatsAKC 5 }


cwoAoHttpxStatsAKCPrepTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CwoAoHttpxStatsAKCPrepEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table gives statistics of Akamai Preposition tasks."
    ::= { cwoAoHttpxStatsAKC 6 }

cwoAoHttpxStatsAKCPrepEntry OBJECT-TYPE
    SYNTAX          CwoAoHttpxStatsAKCPrepEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry containing statistics for a particular Akamai
        Preposition task."
    INDEX           { cwoAoHttpxStatsAKCPrepTaskName } 
    ::= { cwoAoHttpxStatsAKCPrepTable 1 }

CwoAoHttpxStatsAKCPrepEntry ::= SEQUENCE {
        cwoAoHttpxStatsAKCPrepTaskName          OCTET STRING,
        cwoAoHttpxStatsAKCPrepStatus            CwoHttpAKCPrepStatus,
        cwoAoHttpxStatsAKCPrepCacheStoreBytes   Gauge32,
        cwoAoHttpxStatsAKCPrepUncacheStoreBytes Gauge32
}

cwoAoHttpxStatsAKCPrepTaskName OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..64))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the name of the preposition task in
        Akamai connected cache preposition operation." 
    ::= { cwoAoHttpxStatsAKCPrepEntry 1 }

cwoAoHttpxStatsAKCPrepStatus OBJECT-TYPE
    SYNTAX          CwoHttpAKCPrepStatus
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the current status of the preposition
        task in Akamai connected cache preposition operation." 
    ::= { cwoAoHttpxStatsAKCPrepEntry 2 }

cwoAoHttpxStatsAKCPrepCacheStoreBytes OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of response bytes stored
        in the cache for a particular preposition task in Akamai
        connected cache preposition operation." 
    ::= { cwoAoHttpxStatsAKCPrepEntry 3 }

cwoAoHttpxStatsAKCPrepUncacheStoreBytes OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of response bytes not
        stored in the cache for a particular preposition task in Akamai
        connected cache preposition operation." 
    ::= { cwoAoHttpxStatsAKCPrepEntry 4 }
 


cwoAoHttpxStatsAKCBypassCacheTrans OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the Akamai connected cache statistics for
        total number of cache-bypass transactions that were handled in 
        bypass mode transparent cache profile. When bypass mode
        transparent cache profile is set for a particular hostname, the
        caching for the hostname specified in a rule is suppressed. In
        this mode, the cache-engine turns off caching for one or more
        configured sites." 
    ::= { cwoAoHttpxStatsAKCBypassEntry 1 }

cwoAoHttpxStatsAKCBypassRespBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of response bytes saved
        for cache-hit HTTP transactions in bypass mode transparent
        cache profile." 
    ::= { cwoAoHttpxStatsAKCBypassEntry 2 }

cwoAoHttpxStatsAKCBypassCacheTransPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        cache-hit HTTP transactions in bypass mode transparent cache
        profile." 
    ::= { cwoAoHttpxStatsAKCBypassEntry 3 }

cwoAoHttpxStatsAKCBypassRespBytesPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        response bytes saved for cache-hit HTTP transactions in bypass
        mode transparent cache profile." 
    ::= { cwoAoHttpxStatsAKCBypassEntry 4 }

cwoAoHttpxStatsAKCBypassCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total response time saved for
        cache-hit HTTP transactions in bypass mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCBypassEntry 5 }

cwoAoHttpxStatsAKCBypassAvgCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the average response time saved per
        cache-hit HTTP transaction in bypass mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCBypassEntry 6 }

cwoAoHttpxStatsAKCBypassRespTimeSavedPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total response time
        saved for cache-hit HTTP transactions in bypass mode
        transparent cache profile." 
    ::= { cwoAoHttpxStatsAKCBypassEntry 7 }

cwoAoHttpxStatsAKCStdCacheTrans OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the Akamai connected cache statistics for
        total number of cache-hit transactions that were served from
        cache in standard mode transparent cache profile. This is a
        default mode.In this mode, the cache engine also follows the
        RFC-2616 behavior for cache control headers with the exception
        of not honoring the client cache override behavior." 
    ::= { cwoAoHttpxStatsAKCStdEntry 1 }

cwoAoHttpxStatsAKCStdRespBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of response bytes saved
        for cache-hit HTTP transactions in standard mode transparent
        cache profile." 
    ::= { cwoAoHttpxStatsAKCStdEntry 2 }

cwoAoHttpxStatsAKCStdCacheTransPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        cache-hit HTTP transactions in standard mode transparent cache
        profile." 
    ::= { cwoAoHttpxStatsAKCStdEntry 3 }

cwoAoHttpxStatsAKCStdRespBytesPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        response bytes saved for cache-hit HTTP transactions in standard
        mode transparent cache profile." 
    ::= { cwoAoHttpxStatsAKCStdEntry 4 }

cwoAoHttpxStatsAKCStdCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total response time saved for
        cache-hit HTTP transactions in standard mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCStdEntry 5 }

cwoAoHttpxStatsAKCStdAvgCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the average response time saved per
        cache-hit HTTP transaction in standard mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCStdEntry 6 }

cwoAoHttpxStatsAKCStdRespTimeSavedPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total response time
        saved for cache-hit HTTP transactions in standard mode
        transparent cache profile." 
    ::= { cwoAoHttpxStatsAKCStdEntry 7 }

cwoAoHttpxStatsAKCBasicCacheTrans OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the Akamai connected cache statistics for
        total number of cache-hit transactions that were served from
        cache in basic mode transparent cache profile. In this mode, the
        cache engine works in strict RFC-2616 behavior, and therefore,
        only caches responses that are marked explicitly as cacheable
        with cache-control headers or responses that have an expiry
        header to service and accelerate traffic from a datacenter to a
        branch office over any type of IP network." 
    ::= { cwoAoHttpxStatsAKCBasicEntry 1 }

cwoAoHttpxStatsAKCBasicRespBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of response bytes saved
        for cache-hit HTTP transactions in basic mode transparent cache
        profile." 
    ::= { cwoAoHttpxStatsAKCBasicEntry 2 }

cwoAoHttpxStatsAKCBasicCacheTransPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        cache-hit HTTP transactions in basic mode transparent cache
        profile." 
    ::= { cwoAoHttpxStatsAKCBasicEntry 3 }

cwoAoHttpxStatsAKCBasicRespBytesPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        response bytes saved for cache-hit HTTP transactions in basic
        mode transparent cache profile." 
    ::= { cwoAoHttpxStatsAKCBasicEntry 4 }

cwoAoHttpxStatsAKCBasicCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total response time saved for
        cache-hit HTTP transactions in basic mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCBasicEntry 5 }

cwoAoHttpxStatsAKCBasicAvgCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the average response time saved per
        cache-hit HTTP transaction in basic mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCBasicEntry 6 }

cwoAoHttpxStatsAKCBasicRespTimeSavedPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total response time
        saved for cache-hit HTTP transactions in basic mode transparent
        cache profile." 
    ::= { cwoAoHttpxStatsAKCBasicEntry 7 }

cwoAoHttpxStatsAKCAdvCacheTrans OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the Akamai connected cache statistics for
        total number of cache-hit transactions that were served from
        cache in advanced mode transparent cache profile. In advanced
        mode,the cache engine caches media types more aggressively, and
        caches all object types for longer time (when there is no
        explicit expiration time)." 
    ::= { cwoAoHttpxStatsAKCAdvEntry 1 }

cwoAoHttpxStatsAKCAdvRespBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of response bytes saved
        for cache-hit HTTP transactions in advanced mode transparent
        cache profile." 
    ::= { cwoAoHttpxStatsAKCAdvEntry 2 }

cwoAoHttpxStatsAKCAdvCacheTransPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        cache-hit HTTP transactions in advanced mode transparent cache
        profile." 
    ::= { cwoAoHttpxStatsAKCAdvEntry 3 }

cwoAoHttpxStatsAKCAdvRespBytesPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        response bytes saved for cache-hit HTTP transactions in
        advanced mode transparent cache profile." 
    ::= { cwoAoHttpxStatsAKCAdvEntry 4 }

cwoAoHttpxStatsAKCAdvCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total response time saved for
        cache-hit HTTP transactions in advanced mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCAdvEntry 5 }

cwoAoHttpxStatsAKCAdvAvgCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the average response time saved per
        cache-hit HTTP transaction in advanced mode transparent cache
        profile, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCAdvEntry 6 }

cwoAoHttpxStatsAKCAdvRespTimeSavedPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total response time
        saved for cache-hit HTTP transactions in advanced mode
        transparent cache profile." 
    ::= { cwoAoHttpxStatsAKCAdvEntry 7 }

cwoAoHttpxStatsAKCTotalCacheTrans OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the aggregation of all the statistics
        related to various Akamai Connected Cache profile types -
        Bypass, Standard, Basic and Advanced." 
    ::= { cwoAoHttpxStatsAKCTotalEntry 1 }

cwoAoHttpxStatsAKCTotalRespBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of response bytes saved
        for cache-hit HTTP transactions in all transparent cache
        profile modes." 
    ::= { cwoAoHttpxStatsAKCTotalEntry 2 }

cwoAoHttpxStatsAKCTotalCacheTransPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        cache-hit HTTP transactions in all transparent cache profile
        modes." 
    ::= { cwoAoHttpxStatsAKCTotalEntry 3 }

cwoAoHttpxStatsAKCTotalRespBytesPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total number of
        response bytes saved for cache-hit HTTP transactions in all
        transparent cache profile modes." 
    ::= { cwoAoHttpxStatsAKCTotalEntry 4 }

cwoAoHttpxStatsAKCTotalCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total response time saved for
        cache-hit HTTP transactions in all transparent cache profile
        modes, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCTotalEntry 5 }

cwoAoHttpxStatsAKCTotalAvgCacheRespTimeSaved OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the average response time saved per
        cache-hit HTTP transaction in all transparent cache profile
        modes, in milli-seconds." 
    ::= { cwoAoHttpxStatsAKCTotalEntry 6 }

cwoAoHttpxStatsAKCTotalRespTimeSavedPercent OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the percentage of total response time
        saved for Cache-hit HTTP transactions in all transparent cache
        profile modes." 
    ::= { cwoAoHttpxStatsAKCTotalEntry 7 }
-- Extended statistics for MAPI AO

cwoAoMapixStats  OBJECT IDENTIFIER
    ::= { cwoAo 4 }


cwoAoMapixStatsUnEncrALRT OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates Average Local Response Time (ALRT) for
        unencrypted connections of MAPI AO since it was started." 
    ::= { cwoAoMapixStats 1 }

cwoAoMapixStatsEncrALRT OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates Average Local Response Time (ALRT) for
        encrypted connections of MAPI AO since it was started." 
    ::= { cwoAoMapixStats 2 }

cwoAoMapixStatsUnEncrARRT OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates Average Remote Response Time (ARRT) for
        unencrypted connections of MAPI AO since it was started." 
    ::= { cwoAoMapixStats 3 }

cwoAoMapixStatsEncrARRT OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates Average Remote Response Time (ARRT) for
        encrypted connections of MAPI AO since it was started." 
    ::= { cwoAoMapixStats 4 }

cwoAoMapixStatsTotalUnEncrLRs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total requests served locally for
        unencrypted connections by MAPI AO since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the MAPI AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the MAPI
        AO." 
    ::= { cwoAoMapixStats 5 }

cwoAoMapixStatsTotalEncrLRs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total requests served locally for
        encrypted connections by MAPI AO since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the MAPI AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the MAPI
        AO." 
    ::= { cwoAoMapixStats 6 }

cwoAoMapixStatsTotalUnEncrRRs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total Remote Requests(RR) served by
        remote servers for unencrypted connections of MAPI AO since it
        was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the MAPI AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the MAPI
        AO." 
    ::= { cwoAoMapixStats 7 }

cwoAoMapixStatsTotalEncrRRs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total Remote Requests(RR) served by
        remote servers for encrypted connections by MAPI AO since it
        was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the MAPI AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the MAPI
        AO." 
    ::= { cwoAoMapixStats 8 }

cwoAoMapixStatsUnEncrAvgRedTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates average time reduced for unencrypted
        connections due to optimizations done by MAPI AO since it was
        started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the MAPI AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the MAPI
        AO." 
    ::= { cwoAoMapixStats 9 }

cwoAoMapixStatsEncrAvgRedTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates average time reduced for encrypted
        connections due to optimizations done by MAPI AO since it was
        started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the MAPI AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the MAPI
        AO." 
    ::= { cwoAoMapixStats 10 }
-- Extended statistics for NFS AO

cwoAoNfsxStats  OBJECT IDENTIFIER
    ::= { cwoAo 5 }


cwoAoNfsxStatsALRT OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates Average Local Response Time (ALRT) for
        NFS AO since it was started." 
    ::= { cwoAoNfsxStats 1 }

cwoAoNfsxStatsARRT OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates Average Remote Response Time (ARRT) for
        NFS AO since it was started." 
    ::= { cwoAoNfsxStats 2 }

cwoAoNfsxStatsTotalLRs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total requests served locally by NFS AO
        since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the NFS AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the NFS
        AO." 
    ::= { cwoAoNfsxStats 3 }

cwoAoNfsxStatsTotalRRs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total Remote Requests (RR) served by
        remote servers for NFS AO since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the NFS AO. The last discontinuity time is
        indicated by the value of cwoAoStatsLastResetTime for the NFS
        AO." 
    ::= { cwoAoNfsxStats 4 }

cwoAoNfsxStatsEstTimeSaved OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates percentage estimated time saved due to
        optimizations done by NFS AO since it was started." 
    ::= { cwoAoNfsxStats 5 }
-- Extended statistics for Video AO

cwoAoVideoxStats  OBJECT IDENTIFIER
    ::= { cwoAo 6 }


cwoAoVideoxStatsTotalInBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates total incoming bytes for Video AO since
        it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the Video AO. The last discontinuity time
        is indicated by the value of cwoAoStatsLastResetTime for the
        Video AO." 
    ::= { cwoAoVideoxStats 1 }

cwoAoVideoxStatsTotalOutBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates total outgoing bytes for Video AO since
        it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the Video AO. The last discontinuity time
        is indicated by the value of cwoAoStatsLastResetTime for the
        Video AO." 
    ::= { cwoAoVideoxStats 2 }
-- Extended Statistics for CIFS AO

cwoAoCifsxStats  OBJECT IDENTIFIER
    ::= { cwoAo 7 }


cwoAoCifsxStatsTotalReadBytes OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "kilo-bytes"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the total bytes read by clients
        from the client side (via cache or remotely) using CIFS AO
        since CIFS AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 1 }

cwoAoCifsxStatsTotalWrittenBytes OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "kilo-bytes"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the total bytes written to the
        client-side using the CIFS AO since CIFS AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 2 }

cwoAoCifsxStatsTotalRemoteReqs OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the total requests sent to remote file
        server since CIFS AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 3 }

cwoAoCifsxStatsTotalLocalReqs OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the total number requests served locally
        by CIFS AO since it was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 4 }

cwoAoCifsxStatsTotalRemoteTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the total duration of time taken by CIFS
        AO to process all remote requests since CIFS AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 5 }

cwoAoCifsxStatsTotalLocalTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the total duration of time taken by CIFS
        AO to process all local requests since CIFS AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 6 }

cwoAoCifsxStatsConnectedSessions OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "sessions"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the number of currently connected CIFS
        sessions." 
    ::= { cwoAoCifsxStats 7 }

cwoAoCifsxStatsOpenFiles OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "files"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the number of currently open CIFS files." 
    ::= { cwoAoCifsxStats 8 }

cwoAoCifsxStatsMaxCacheSize OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "kilo-bytes"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the maximum disk space (in KB) allocated
        for data in the CIFS AO cache." 
    ::= { cwoAoCifsxStats 9 }

cwoAoCifsxStatsCurrentCacheSize OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "kilo-bytes"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the amount of disk space (in KB),
        currently being used for data in the CIFS AO cache." 
    ::= { cwoAoCifsxStats 10 }

cwoAoCifsxStatsMaxCacheResources OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "files"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the maximum number of cache resources
        (files and directories) supported by the CIFS AO cache,
        regardless of the size of these resources." 
    ::= { cwoAoCifsxStats 11 }

cwoAoCifsxStatsCacheResources OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "files"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the number of cache resources (files
        and directories) currently held in the CIFS AO cache." 
    ::= { cwoAoCifsxStats 12 }

cwoAoCifsxStatsEvictedResources OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "files"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the number of cache resources (files and
        directories) that have been evicted from the cache since CIFS
        AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 13 }

cwoAoCifsxStatsLastEvictedTime OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the time when cache resources (files and
        directories) were last evicted from the CIFS AO cache. 00:00 is
        displayed if no cache resources have been evicted since CIFS AO
        was started." 
    ::= { cwoAoCifsxStats 14 }

cwoAoCifsxStatsVolHiWatermark OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the disk usage high watermark in
        percentage that triggers the eviction of resources from the
        CIFS AO cache." 
    ::= { cwoAoCifsxStats 15 }

cwoAoCifsxStatsVolLoWatermark OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the target disk usage low watermark
        percentage to be reached via cache eviction when triggered by
        cfVolHiWatermark. When this low watermark is reached, cache
        eviction stops." 
    ::= { cwoAoCifsxStats 16 }

cwoAoCifsxStatsAmntHiWatermark OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the target percentage of maximum cache
        resources (defined by cfMaxCacheResources) that triggers the
        eviction of resources from the CIFS AO cache." 
    ::= { cwoAoCifsxStats 17 }

cwoAoCifsxStatsAmntLoWatermark OBJECT-TYPE
    SYNTAX          Gauge32 (0..100)
    UNITS           "percent"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the target percentage of maximum cache
        resources (defined by cfMaxCacheResources) to be reached via
        cache eviction when triggered by cfAmntHiWatermark. When this
        low watermark is reached, cache eviction stops." 
    ::= { cwoAoCifsxStats 18 }

cwoAoCifsxStatsEvictedAge OBJECT-TYPE
    SYNTAX          TimeInterval
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the amount of time spent in the CIFS AO
        cache by the resource that was last evicted. If this amount is
        too short or too long, it is recommended to modify the size of
        the cache." 
    ::= { cwoAoCifsxStats 19 }

cwoAoCifsxStatsEvictedLastAccess OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object indicates the value of sysUpTime when the resource,
        which was last evicted from the CIFS AO cache has been last
        accessed." 
    ::= { cwoAoCifsxStats 20 }

cwoAoCifsxStatsFFTotalReqs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object contains total number of FindFirst (FF) requests
        since CIFS AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 21 }

cwoAoCifsxStatsFFRemoteReqs OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "requests"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object contains total number of FindFirst (FF) requests
        sent to the remote file-server since CIFS AO was started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 22 }

cwoAoCifsxStatsFFLocalRespTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object contains the average local response time for
        FindFirst (FF) requests replied locally since CIFS AO was
        started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 23 }

cwoAoCifsxStatsFFRemoteRespTime OBJECT-TYPE
    SYNTAX          CiscoMilliSeconds
    UNITS           "milliseconds"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object contains the average remote response time for
        FindFirst (FF) requests replied remotely since CIFS AO was
        started.

        Discontinuities in the value of this counter can occur at
        re-initialization of the CIFS AO. The last discontinuity time
        is
        indicated by the value of cwoAoStatsLastResetTime for the CIFS
        AO." 
    ::= { cwoAoCifsxStats 24 }

cwoAoCifsxStatsDirResources OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "files"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "This object contains the total number of currently allocated
        Directory Resources in CIFS AO." 
    ::= { cwoAoCifsxStats 25 }
-- Application statistics Table

cwoAppStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CwoAppStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the statistics for applications configured on
        the wan optimization system."
    ::= { cwoApp 1 }

cwoAppStatsEntry OBJECT-TYPE
    SYNTAX          CwoAppStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry describing statistics for applications configured on
        the WAN optimization system. The WAN opimitization system
        creates an entry when a user configures an application for
        optimization. The WAN optimization system deletes an entry, when
        user removes the application from the configuration."
    INDEX           { cwoAppStatsAppName } 
    ::= { cwoAppStatsTable 1 }

CwoAppStatsEntry ::= SEQUENCE {
        cwoAppStatsAppName        SnmpAdminString,
        cwoAppStatsOriginalBytes  Counter64,
        cwoAppStatsOptimizedBytes Counter64,
        cwoAppStatsPTBytes        Counter64
}

cwoAppStatsAppName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the name of a particular application,
        which is configured for optimization." 
    ::= { cwoAppStatsEntry 1 }

cwoAppStatsOriginalBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total original traffic (uncompressed) in
        bytes of a particular application that has entered into the
        system." 
    ::= { cwoAppStatsEntry 2 }

cwoAppStatsOptimizedBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total optimized traffic in bytes of a
        particular application." 
    ::= { cwoAppStatsEntry 3 }

cwoAppStatsPTBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total pass-through traffic in bytes of a
        particular application." 
    ::= { cwoAppStatsEntry 4 }
 

-- Policy map statistics table

cwoPmapStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CwoPmapStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the staistics for active policy maps."
    ::= { cwoPmap 1 }

cwoPmapStatsEntry OBJECT-TYPE
    SYNTAX          CwoPmapStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry describing statistics related with an active policy
        map of a given type. The WAN optimization system creates/deletes
        an entry for a policy map when it is made active/inactive
        through configuration changes."
    INDEX           {
                        cwoPmapStatsType,
                        cwoPmapStatsName
                    } 
    ::= { cwoPmapStatsTable 1 }

CwoPmapStatsEntry ::= SEQUENCE {
        cwoPmapStatsType         CwoTypes,
        cwoPmapStatsName         SnmpAdminString,
        cwoPmapStatsDescr        SnmpAdminString,
        cwoPmapStatsTotalConns   Counter64,
        cwoPmapStatsTotalBytes   Counter64,
        cwoPmapStatsTotalPTConns Counter64,
        cwoPmapStatsTotalPTBytes Counter64
}

cwoPmapStatsType OBJECT-TYPE
    SYNTAX          CwoTypes
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates type of the policy map." 
    ::= { cwoPmapStatsEntry 1 }

cwoPmapStatsName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates name of the policy map." 
    ::= { cwoPmapStatsEntry 2 }

cwoPmapStatsDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the descriptive information of the policy
        map configured on the WAN optimization system. If the
        description is not configured for a given policy map then this
        string will contain a NULL string." 
    ::= { cwoPmapStatsEntry 3 }

cwoPmapStatsTotalConns OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "connections"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total number of connections processed by
        the policy map since it is active." 
    ::= { cwoPmapStatsEntry 4 }

cwoPmapStatsTotalBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "kilo-bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total bytes processed by the policy map
        since it is active." 
    ::= { cwoPmapStatsEntry 5 }

cwoPmapStatsTotalPTConns OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "connections"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total connections, which are made
        as pass-through due to some reason by the policy map since it
        is
        active." 
    ::= { cwoPmapStatsEntry 6 }

cwoPmapStatsTotalPTBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "kilo-bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total bytes which are made pass-through
        by the policy map since it is active." 
    ::= { cwoPmapStatsEntry 7 }
 

-- Class map statistics table.

cwoCmapStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CwoCmapStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the staistics for class maps associated with
        the active policy map."
    ::= { cwoCmap 1 }

cwoCmapStatsEntry OBJECT-TYPE
    SYNTAX          CwoCmapStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry describes statistics for the class maps associated
        with active policy maps. A new entry will be created for the
        class map when a new class map gets associated to the policy map
        through the configuration changes. An entry will be deleted,
        when the class map is disassociated from the active policy map
        through the configuration changes."
    INDEX           {
                        cwoCmapStatsType,
                        cwoCmapStatsName
                    } 
    ::= { cwoCmapStatsTable 1 }

CwoCmapStatsEntry ::= SEQUENCE {
        cwoCmapStatsType         CwoTypes,
        cwoCmapStatsName         SnmpAdminString,
        cwoCmapStatsDescr        SnmpAdminString,
        cwoCmapStatsTotalConns   Counter64,
        cwoCmapStatsTotalBytes   Counter64,
        cwoCmapStatsTotalPTConns Counter64,
        cwoCmapStatsTotalPTBytes Counter64
}

cwoCmapStatsType OBJECT-TYPE
    SYNTAX          CwoTypes
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the type of the class map." 
    ::= { cwoCmapStatsEntry 1 }

cwoCmapStatsName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the name of the class map." 
    ::= { cwoCmapStatsEntry 2 }

cwoCmapStatsDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the descriptive information of the class
        map configured on the WAN optimization system. If the
        description is not configured for a given class map then this
        string will contain a NULL string." 
    ::= { cwoCmapStatsEntry 3 }

cwoCmapStatsTotalConns OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "connections"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of connections processed
        by the class map." 
    ::= { cwoCmapStatsEntry 4 }

cwoCmapStatsTotalBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total bytes processed by the
        class map." 
    ::= { cwoCmapStatsEntry 5 }

cwoCmapStatsTotalPTConns OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "connections"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates total connections, which are made
        as pass-through due to some reason by the class map." 
    ::= { cwoCmapStatsEntry 6 }

cwoCmapStatsTotalPTBytes OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total bytes which are made
        pass-through by the class map." 
    ::= { cwoCmapStatsEntry 7 }
 


-- Notifications

cwoTfoConnectionOverload NOTIFICATION-TYPE
    OBJECTS         { cwoTfoStatsMaxActiveConn }
    STATUS          current
    DESCRIPTION
        "This notification indicates that the device has reached its
        limit of number of connections it can optimize. No new
        connections will be picked-up for optimization, while the device
        is in this state."
   ::= { ciscoWanOptimizationMIBNotifs 1 }

cwoPeerOverload NOTIFICATION-TYPE
    OBJECTS         { cwoGeneralMaxActivePeers }
    STATUS          current
    DESCRIPTION
        "This notification indicates the device has reached its limit of
        number of peer devices with which it can optimize connections.
        While the device is in this state, connections from new peer
        device will not be picked-up for optimization."
   ::= { ciscoWanOptimizationMIBNotifs 2 }

cwoCpuThrottlingOn NOTIFICATION-TYPE
    OBJECTS         {
                        cwoGeneralCpuThrottleHigh,
                        cwoGeneralCpuThrottlPeriod,
                        cpmCPUTotalMonIntervalValue
                    }
    STATUS          current
    DESCRIPTION
        "This notification indicates that the device has detected that
        the current CPU utilization (stored in
        cpmCPUTotalMonIntervalValue) is higher than the
        cwoGeneralCpuThrottleHigh. As a result the device has entered
        into a throttling mode due to which connections under
        optimization may experience slowdown. This notification is
        generated the moment it occurs after a time lapse of 30 minutes
        since the previous notification."
   ::= { ciscoWanOptimizationMIBNotifs 3 }

cwoCpuThrottlingOff NOTIFICATION-TYPE
    OBJECTS         {
                        cwoGeneralCpuThrottleLow,
                        cwoGeneralCpuThrottlPeriod,
                        cpmCPUTotalMonIntervalValue
                    }
    STATUS          current
    DESCRIPTION
        "This notification indicates that device has detected that the
        CPU utilization of device (stored in
        cpmCPUTotalMonIntervalValue) has fallen below the
        cwoGeneralCpuThrottleLow from cwoGeneralCpuThrottleHigh. As a
        result the device has come out of the throttling mode and there
        should not be any negative impact of CPU usage on connection
        under optimization. This notification is generated the moment it
        occurs after a time lapse of 30 minutes since the previous
        notification."
   ::= { ciscoWanOptimizationMIBNotifs 4 }

cwoLicenseExpired NOTIFICATION-TYPE
    STATUS          current
    DESCRIPTION
        "This notification is generated when the license on the system
        expires after the period for which it was installed."
   ::= { ciscoWanOptimizationMIBNotifs 5 }

cwoLicenseRevoked NOTIFICATION-TYPE
    STATUS          current
    DESCRIPTION
        "This notification is generated when a requested revoke ticket
        is obtained. This ticket could have been requested in order to
        move the license to a different system."
   ::= { ciscoWanOptimizationMIBNotifs 6 }

cwoLicenseDeleted NOTIFICATION-TYPE
    STATUS          current
    DESCRIPTION
        "This notification is generated when the license on the system
        is cleared."
   ::= { ciscoWanOptimizationMIBNotifs 7 }

-- compliance statements

ciscoWanOptimizationMIBCompliance MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "This is a default module-compliance containing default object
        groups."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cwoTfoBaseGroup,
                        cwoOverloadNotificationGroup
                    }

    GROUP           cwoGeneralGroup
    DESCRIPTION
        "This group is optional and indicates general statistics for WAN
        optimization system/sub-system."

    GROUP           cwoTfoExtGroup
    DESCRIPTION
        "This group is optional and includes more specific stats for TFO."

    GROUP           cwoAoStatsGroup
    DESCRIPTION
        "This group includes common statistics for AO. It is optional for
        systems which does not support any AO."

    GROUP           cwoCpuNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoAoSmbExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems who does not
        support SMB AO."
    ::= { ciscoWanOptimizationMIBCompliances 1 }

ciscoWanOptimizationMIBCompliance1 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "This is a default module-compliance containing default object
        groups."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cwoTfoBaseGroup,
                        cwoOverloadNotificationGroup
                    }

    GROUP           cwoGeneralGroup
    DESCRIPTION
        "This group is optional and indicates general statistics for WAN
        optimization system/sub-system."

    GROUP           cwoTfoExtGroup
    DESCRIPTION
        "This group is optional and includes more specific stats for TFO."

    GROUP           cwoAoStatsGroup
    DESCRIPTION
        "This group includes common statistics for AO. It is optional for
        systems which does not support any AO."

    GROUP           cwoCpuNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoAoSmbExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems who does
        not
        support SMB AO."

    GROUP           cwoLicenseNotificationGroup
    DESCRIPTION
        "This group is optional for systems that have wan optimization."
    ::= { ciscoWanOptimizationMIBCompliances 2 }

ciscoWanOptimizationMIBComplianceRev2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "This is a default module-compliance containing default object
        groups. This compliance module deprecates 
        ciscoWanOptimizationMIBCompliance1."
    MODULE          -- this module
    MANDATORY-GROUPS { cwoTfoBaseGroup }

    GROUP           cwoGeneralGroup
    DESCRIPTION
        "This group is optional and indicates general statistics for WAN
        optimization system/sub-system."

    GROUP           cwoCpuNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoOverloadNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoLicenseNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoAoHttpExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support HTTP AO."

    GROUP           cwoAoMapiExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support MAPI AO."

    GROUP           cwoAoNfsExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support NFS AO."

    GROUP           cwoAoVideoExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support Video AO."

    GROUP           cwoAoCifsExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support CIFS AO."

    GROUP           cwoAoApplicationStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not associates applications with AOs."

    GROUP           cwoAoPolicyMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement policy map for processing traffic."

    GROUP           cwoAoClassMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement class-maps for processing traffic."

    GROUP           cwoAoStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoTfoExtGroupRev1
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoTfoExtGroup
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoAoStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoSmbExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization system, which does
        not support SMB AO."
    ::= { ciscoWanOptimizationMIBCompliances 3 }

ciscoWanOptimizationMIBComplianceRev3 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "This is a default module-compliance containing default object
        groups. This compliance module deprecates 
        ciscoWanOptimizationMIBComplianceRev2."
    MODULE          -- this module
    MANDATORY-GROUPS { cwoTfoBaseGroup }

    GROUP           cwoGeneralGroup
    DESCRIPTION
        "This group is optional and indicates general statistics for WAN
        optimization system/sub-system."

    GROUP           cwoCpuNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoOverloadNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoLicenseNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoAoHttpExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support HTTP AO."

    GROUP           cwoAoMapiExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support MAPI AO."

    GROUP           cwoAoNfsExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support NFS AO."

    GROUP           cwoAoVideoExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support Video AO."

    GROUP           cwoAoCifsExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support CIFS AO."

    GROUP           cwoAoApplicationStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not associates applications with AOs."

    GROUP           cwoAoPolicyMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement policy map for processing traffic."

    GROUP           cwoAoClassMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement class-maps for processing traffic."

    GROUP           cwoAoStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoTfoExtGroupRev1
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoTfoExtGroup
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoAoStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoSmbExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization system, which does
        not support SMB AO."

    GROUP           cwoAoHttpExtendedStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support HTTP AO."

    GROUP           cwoAoCifsExtendedStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support CIFS AO."
    ::= { ciscoWanOptimizationMIBCompliances 4 }

ciscoWanOptimizationMIBComplianceRev4 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "This is a default module-compliance containing default object
        groups. This compliance module deprecates 
        ciscoWanOptimizationMIBComplianceRev3."
    MODULE          -- this module
    MANDATORY-GROUPS { cwoTfoBaseGroup }

    GROUP           cwoGeneralGroup
    DESCRIPTION
        "This group is optional and indicates general statistics for WAN
        optimization system/sub-system."

    GROUP           cwoCpuNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoOverloadNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoLicenseNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoAoHttpExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support HTTP AO."

    GROUP           cwoAoMapiExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support MAPI AO."

    GROUP           cwoAoNfsExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support NFS AO."

    GROUP           cwoAoVideoExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support Video AO."

    GROUP           cwoAoCifsExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support CIFS AO."

    GROUP           cwoAoApplicationStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not associates applications with AOs."

    GROUP           cwoAoPolicyMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement policy map for processing traffic."

    GROUP           cwoAoClassMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement class-maps for processing traffic."

    GROUP           cwoAoStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoTfoExtGroupRev1
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoTfoExtGroup
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoAoStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoSmbExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization system, which does
        not support SMB AO."

    GROUP           cwoAoHttpExtendedStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support HTTP AO."

    GROUP           cwoAoCifsExtendedStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support CIFS AO."

    GROUP           cwoAoSmbExtendedStatsGroupRev1
    DESCRIPTION
        "This group is mandatory only for WAN optimization system that
        support Signed Bytes statistics for SMB AO."
    ::= { ciscoWanOptimizationMIBCompliances 5 }

ciscoWanOptimizationMIBComplianceRev5 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "This is a default module-compliance containing default object
        groups. This compliance module deprecates 
        ciscoWanOptimizationMIBComplianceRev4."
    MODULE          -- this module
    MANDATORY-GROUPS { cwoTfoBaseGroup }

    GROUP           cwoGeneralGroup
    DESCRIPTION
        "This group is optional and indicates general statistics for WAN
        optimization system/sub-system."

    GROUP           cwoCpuNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service"

    GROUP           cwoOverloadNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoLicenseNotificationGroup
    DESCRIPTION
        "This group is optional to implement, but mandatory for systems
        which run WAN optimization as a service."

    GROUP           cwoAoHttpExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support HTTP AO."

    GROUP           cwoAoMapiExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support MAPI AO."

    GROUP           cwoAoNfsExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support NFS AO."

    GROUP           cwoAoApplicationStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not associates applications with AOs."

    GROUP           cwoAoPolicyMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement policy map for processing traffic."

    GROUP           cwoAoClassMapStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not implement class-maps for processing traffic."

    GROUP           cwoAoStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoTfoExtGroupRev1
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoTfoExtGroup
    DESCRIPTION
        "This group is optional for system supporting TFO AO."

    GROUP           cwoAoStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support various AOs for traffic optimization."

    GROUP           cwoAoSmbExtendedStatsGroup
    DESCRIPTION
        "This group is optional for WAN optimization system, which does
        not support SMB AO."

    GROUP           cwoAoHttpExtendedStatsGroupRev1
    DESCRIPTION
        "This group is optional for WAN optimization systems which does
        not support HTTP AO."

    GROUP           cwoAoSmbExtendedStatsGroupRev1
    DESCRIPTION
        "This group is mandatory only for WAN optimization system that
        support Signed Bytes statistics for SMB AO."

    GROUP           cwoAoHttpExtendedStatsGroupRev2
    DESCRIPTION
        "This group is mandatory only for WAN optimization system that
        support Akamai Cache statistics for HTTP AO"

    GROUP           cwoDreCacheStatsGroup
    DESCRIPTION
        "This group is optional for system supporting DRE cache
        statistics."

    GROUP           cwoDrePerfStatsGroup
    DESCRIPTION
        "This group is optional for system supporting DRE performance
        statistics."
    ::= { ciscoWanOptimizationMIBCompliances 6 }
-- Groups

ciscoWanOptimizationMIBGroups  OBJECT IDENTIFIER
    ::= { ciscoWanOptimizationMIBConform 2 }


cwoGeneralGroup OBJECT-GROUP
    OBJECTS         {
                        cwoGeneralActivePeers,
                        cwoGeneralMaxActivePeers,
                        cwoGeneralCpuThrottleHigh,
                        cwoGeneralCpuThrottleLow,
                        cwoGeneralCpuThrottlPeriod
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the general statistics of
        WAN optimization system/sub-system."
    ::= { ciscoWanOptimizationMIBGroups 1 }

cwoTfoBaseGroup OBJECT-GROUP
    OBJECTS         {
                        cwoTfoStatsTotalOptConn,
                        cwoTfoStatsActiveOptConn,
                        cwoTfoStatsMaxActiveConn,
                        cwoTfoStatsTotalNormalClosedConn,
                        cwoTfoStatsResetConn
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the common statistics for
        TFO."
    ::= { ciscoWanOptimizationMIBGroups 2 }

cwoTfoExtGroup OBJECT-GROUP
    OBJECTS         {
                        cwoTfoStatsActiveOptTCPPlusConn,
                        cwoTfoStatsActiveOptTCPOnlyConn,
                        cwoTfoStatsActiveOptTCPPrepConn,
                        cwoTfoStatsActiveADConn,
                        cwoTfoStatsReservedConn,
                        cwoTfoStatsPendingConn,
                        cwoTfoStatsActivePTConn
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the statistics for
        TFO, which are optional."
    ::= { ciscoWanOptimizationMIBGroups 3 }

cwoAoStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAoStatsIsConfigured,
                        cwoAoStatsIsLicensed,
                        cwoAoStatsOperationalState,
                        cwoAoStatsStartUpTime,
                        cwoAoStatsTotalHandledConns,
                        cwoAoStatsTotalOptConns,
                        cwoAoStatsTotalHandedOffConns,
                        cwoAoStatsTotalDroppedConns,
                        cwoAoStatsActiveOptConns,
                        cwoAoStatsPendingConns,
                        cwoAoStatsMaxActiveOptConns,
                        cwoAoStatsLastResetTime
                    }
    STATUS          current
    DESCRIPTION
        "This group includes statistics for AO. Which are common for all
        AOs."
    ::= { ciscoWanOptimizationMIBGroups 4 }

cwoOverloadNotificationGroup NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        cwoTfoConnectionOverload,
                        cwoPeerOverload
                    }
    STATUS          current
    DESCRIPTION
        "This group contains notifications event for various overload
        condition on wan optimization system."
    ::= { ciscoWanOptimizationMIBGroups 5 }

cwoCpuNotificationGroup NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        cwoCpuThrottlingOn,
                        cwoCpuThrottlingOff
                    }
    STATUS          current
    DESCRIPTION
        "This group contains notifications event for wan optimization
        system, which are specific to some WAN optimization systems."
    ::= { ciscoWanOptimizationMIBGroups 6 }

cwoAoSmbExtendedStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAoSmbxStatsBytesReadCache,
                        cwoAoSmbxStatsBytesWriteCache,
                        cwoAoSmbxStatsBytesReadServer,
                        cwoAoSmbxStatsBytesWriteServer,
                        cwoAoSmbxStatsBytesReadClient,
                        cwoAoSmbxStatsBytesWriteClient,
                        cwoAoSmbxStatsProcessedReqs,
                        cwoAoSmbxStatsActiveReqs,
                        cwoAoSmbxStatsTotalTimedOutReqs,
                        cwoAoSmbxStatsTotalRemoteReqs,
                        cwoAoSmbxStatsTotalLocalReqs,
                        cwoAoSmbxStatsRemoteAvgTime,
                        cwoAoSmbxStatsLocalAvgTime,
                        cwoAoSmbxStatsRACacheHitCount,
                        cwoAoSmbxStatsMDCacheHitCount,
                        cwoAoSmbxStatsRACacheHitRate,
                        cwoAoSmbxStatsMDCacheHitRate,
                        cwoAoSmbxStatsMaxRACacheSize,
                        cwoAoSmbxStatsMaxMDCacheSize,
                        cwoAoSmbxStatsMDCacheSize,
                        cwoAoSmbxStatsRAEvictedAge,
                        cwoAoSmbxStatsRTT,
                        cwoAoSmbxStatsTotalRespTimeSaving,
                        cwoAoSmbxStatsOpenFiles,
                        cwoAoSmbxStatsTotalFilesInRACache
                    }
    STATUS          current
    DESCRIPTION
        "This Group contains statistics which are specific to SMB AO."
    ::= { ciscoWanOptimizationMIBGroups 7 }

cwoLicenseNotificationGroup NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        cwoLicenseExpired,
                        cwoLicenseRevoked,
                        cwoLicenseDeleted
                    }
    STATUS          current
    DESCRIPTION
        "This group contains notifications event for actions on
        licensing on wan optimization systems."
    ::= { ciscoWanOptimizationMIBGroups 8 }

cwoAoHttpExtendedStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAoHttpxStatsTotalSavedTime,
                        cwoAoHttpxStatsTotalRTT,
                        cwoAoHttpxStatsTotalMDCMTime,
                        cwoAoHttpxStatsEstSavedTime
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics which are specific to HTTP AO."
    ::= { ciscoWanOptimizationMIBGroups 9 }

cwoAoMapiExtendedStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAoMapixStatsUnEncrALRT,
                        cwoAoMapixStatsUnEncrARRT,
                        cwoAoMapixStatsTotalUnEncrLRs,
                        cwoAoMapixStatsTotalUnEncrRRs,
                        cwoAoMapixStatsUnEncrAvgRedTime,
                        cwoAoMapixStatsEncrALRT,
                        cwoAoMapixStatsEncrARRT,
                        cwoAoMapixStatsTotalEncrLRs,
                        cwoAoMapixStatsTotalEncrRRs,
                        cwoAoMapixStatsEncrAvgRedTime
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics which are specific to MAPI AO."
    ::= { ciscoWanOptimizationMIBGroups 10 }

cwoAoNfsExtendedStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAoNfsxStatsALRT,
                        cwoAoNfsxStatsARRT,
                        cwoAoNfsxStatsTotalLRs,
                        cwoAoNfsxStatsTotalRRs,
                        cwoAoNfsxStatsEstTimeSaved
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics which are specific to NFS AO."
    ::= { ciscoWanOptimizationMIBGroups 11 }

cwoAoVideoExtendedStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAoVideoxStatsTotalInBytes,
                        cwoAoVideoxStatsTotalOutBytes
                    }
    STATUS          deprecated
    DESCRIPTION
        "This group contains statistics which are specific to Video AO.
        This group is deprecated as all the objects in cwoAoVideoxStats
        table are deprecated."
    ::= { ciscoWanOptimizationMIBGroups 12 }

cwoAoCifsExtendedStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAoCifsxStatsTotalReadBytes,
                        cwoAoCifsxStatsTotalWrittenBytes,
                        cwoAoCifsxStatsTotalRemoteReqs,
                        cwoAoCifsxStatsTotalLocalReqs,
                        cwoAoCifsxStatsTotalRemoteTime,
                        cwoAoCifsxStatsTotalLocalTime,
                        cwoAoCifsxStatsConnectedSessions,
                        cwoAoCifsxStatsOpenFiles,
                        cwoAoCifsxStatsMaxCacheSize,
                        cwoAoCifsxStatsCurrentCacheSize,
                        cwoAoCifsxStatsMaxCacheResources,
                        cwoAoCifsxStatsCacheResources,
                        cwoAoCifsxStatsEvictedResources,
                        cwoAoCifsxStatsLastEvictedTime,
                        cwoAoCifsxStatsVolHiWatermark,
                        cwoAoCifsxStatsVolLoWatermark,
                        cwoAoCifsxStatsAmntHiWatermark,
                        cwoAoCifsxStatsAmntLoWatermark,
                        cwoAoCifsxStatsEvictedAge,
                        cwoAoCifsxStatsEvictedLastAccess
                    }
    STATUS          deprecated
    DESCRIPTION
        "This group contains statistics which are specific to CIFS AO.
        This group is deprecated as all the objects in cwoAoCifsxStats
        table are deprecated."
    ::= { ciscoWanOptimizationMIBGroups 13 }

cwoAoApplicationStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoAppStatsOriginalBytes,
                        cwoAppStatsOptimizedBytes,
                        cwoAppStatsPTBytes
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics for applications associated with
        AO."
    ::= { ciscoWanOptimizationMIBGroups 14 }

cwoAoPolicyMapStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoPmapStatsDescr,
                        cwoPmapStatsTotalConns,
                        cwoPmapStatsTotalBytes,
                        cwoPmapStatsTotalPTConns,
                        cwoPmapStatsTotalPTBytes
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics for active policy map."
    ::= { ciscoWanOptimizationMIBGroups 15 }

cwoAoClassMapStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoCmapStatsDescr,
                        cwoCmapStatsTotalConns,
                        cwoCmapStatsTotalBytes,
                        cwoCmapStatsTotalPTConns,
                        cwoCmapStatsTotalPTBytes
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics for class maps associated with
        active policy map."
    ::= { ciscoWanOptimizationMIBGroups 16 }

cwoAoStatsGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cwoAoStatsLoadStatus,
                        cwoAoStatsBwOpt
                    }
    STATUS          current
    DESCRIPTION
        "This group includes statistics, which are common for all AOs."
    ::= { ciscoWanOptimizationMIBGroups 17 }

cwoAoTfoExtGroupRev1 OBJECT-GROUP
    OBJECTS         { cwoTfoStatsLoadStatus }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the statistics for TFO,
        which are optional."
    ::= { ciscoWanOptimizationMIBGroups 18 }

cwoAoHttpExtendedStatsGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cwoAoHttpxStatsTotalSPSessions,
                        cwoAoHttpxStatsTotalSPPFSessions,
                        cwoAoHttpxStatsTotalSPPFObjects,
                        cwoAoHttpxStatsTotalSPRTTSaved,
                        cwoAoHttpxStatsTotalSPPFMissTime
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics specific to cwoAoHttpxStats
        group enhancement and SharePoint AO."
    ::= { ciscoWanOptimizationMIBGroups 19 }

cwoAoCifsExtendedStatsGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cwoAoCifsxStatsFFTotalReqs,
                        cwoAoCifsxStatsFFRemoteReqs,
                        cwoAoCifsxStatsFFLocalRespTime,
                        cwoAoCifsxStatsFFRemoteRespTime,
                        cwoAoCifsxStatsDirResources
                    }
    STATUS          deprecated
    DESCRIPTION
        "This group contains statistics specific to CIFS Atkins
        feature. This group is deprecated as all the objects in
        cwoAoCifsxStats table are deprecated."
    ::= { ciscoWanOptimizationMIBGroups 20 }

cwoAoSmbExtendedStatsGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cwoAoSmbxStatsRdL4SignWANBytes,
                        cwoAoSmbxStatsWrL4SignWANBytes,
                        cwoAoSmbxStatsRdSignLANBytes,
                        cwoAoSmbxStatsWrSignLANBytes
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics specific to Signed Bytes
        Statistics feature for SMB AO."
    ::= { ciscoWanOptimizationMIBGroups 21 }

cwoAoHttpExtendedStatsGroupRev2 OBJECT-GROUP
    OBJECTS         {
                        cwoAoHttpxStatsAKCBypassCacheTrans,
                        cwoAoHttpxStatsAKCBypassRespBytes,
                        cwoAoHttpxStatsAKCBypassCacheTransPercent,
                        cwoAoHttpxStatsAKCBypassRespBytesPercent,
                        cwoAoHttpxStatsAKCBypassCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCBypassAvgCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCBypassRespTimeSavedPercent,
                        cwoAoHttpxStatsAKCStdCacheTrans,
                        cwoAoHttpxStatsAKCStdRespBytes,
                        cwoAoHttpxStatsAKCStdCacheTransPercent,
                        cwoAoHttpxStatsAKCStdRespBytesPercent,
                        cwoAoHttpxStatsAKCStdCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCStdAvgCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCStdRespTimeSavedPercent,
                        cwoAoHttpxStatsAKCBasicCacheTrans,
                        cwoAoHttpxStatsAKCBasicRespBytes,
                        cwoAoHttpxStatsAKCBasicCacheTransPercent,
                        cwoAoHttpxStatsAKCBasicRespBytesPercent,
                        cwoAoHttpxStatsAKCBasicCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCBasicAvgCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCBasicRespTimeSavedPercent,
                        cwoAoHttpxStatsAKCAdvCacheTrans,
                        cwoAoHttpxStatsAKCAdvRespBytes,
                        cwoAoHttpxStatsAKCAdvCacheTransPercent,
                        cwoAoHttpxStatsAKCAdvRespBytesPercent,
                        cwoAoHttpxStatsAKCAdvCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCAdvAvgCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCAdvRespTimeSavedPercent,
                        cwoAoHttpxStatsAKCTotalCacheTrans,
                        cwoAoHttpxStatsAKCTotalRespBytes,
                        cwoAoHttpxStatsAKCTotalCacheTransPercent,
                        cwoAoHttpxStatsAKCTotalRespBytesPercent,
                        cwoAoHttpxStatsAKCTotalCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCTotalAvgCacheRespTimeSaved,
                        cwoAoHttpxStatsAKCTotalRespTimeSavedPercent,
                        cwoAoHttpxStatsAKCPrepStatus,
                        cwoAoHttpxStatsAKCPrepCacheStoreBytes,
                        cwoAoHttpxStatsAKCPrepUncacheStoreBytes
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics specific to cwoAoHttpxStats
        group enhancement and HTTP Akamai Cache."
    ::= { ciscoWanOptimizationMIBGroups 22 }

cwoDreCacheStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoDreCacheStatsStatus,
                        cwoDreCacheStatsAge,
                        cwoDreCacheStatsTotal,
                        cwoDreCacheStatsUsed,
                        cwoDreCacheStatsDataUnitUsage,
                        cwoDreCacheStatsReplacedOneHrDataUnit,
                        cwoDreCacheStatsDataUnitAge,
                        cwoDreCacheStatsSigblockUsage,
                        cwoDreCacheStatsReplacedOneHrSigblock,
                        cwoDreCacheStatsSigblockAge
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics specific to DRE cache
        statistics."
    ::= { ciscoWanOptimizationMIBGroups 23 }

cwoDrePerfStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cwoDrePerfStatsEncodeCompressionRatio,
                        cwoDrePerfStatsEncodeCompressionLatency,
                        cwoDrePerfStatsEncodeAvgMsgSize,
                        cwoDrePerfStatsDecodeCompressionRatio,
                        cwoDrePerfStatsDecodeCompressionLatency,
                        cwoDrePerfStatsDecodeAvgMsgSize
                    }
    STATUS          current
    DESCRIPTION
        "This group contains statistics specific to DRE performance
        statistics."
    ::= { ciscoWanOptimizationMIBGroups 24 }

END