path: root/MIBS/cisco/CISCOSB-DOT1X-MIB

CISCOSB-DOT1X-MIB DEFINITIONS ::= BEGIN

-- Title:                CISCOSB ROS
--                       Private DOT1X MIB
-- Version:              7.46
-- Date:                 15-Jan-2007

IMPORTS
    switch001                                                                       FROM CISCOSB-MIB
    OBJECT-TYPE, MODULE-IDENTITY, Counter32, Counter64, TimeTicks, Unsigned32       FROM SNMPv2-SMI
    TruthValue, RowStatus                                                           FROM SNMPv2-TC
    VlanIndex, PortList, dot1qFdbId                                                 FROM Q-BRIDGE-MIB
    MacAddress                                                                      FROM SNMPv2-TC
    SnmpAdminString                                                                 FROM SNMP-FRAMEWORK-MIB
    PaeControlledPortStatus, dot1xAuthSessionStatsEntry, dot1xPaePortNumber         FROM IEEE8021-PAE-MIB
    ieee8021XPaePortNumber                                                          FROM IEEE8021X-PAE-MIB;

rldot1x MODULE-IDENTITY
                LAST-UPDATED "200701020001Z"
                ORGANIZATION "Cisco Systems, Inc."

                CONTACT-INFO
                "Postal: 170 West Tasman Drive
                San Jose , CA 95134-1706
                USA

                
                Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

                DESCRIPTION
                      "This private MIB module defines dot1x private MIBs."
                REVISION "200701020000Z"
                DESCRIPTION
                      "Initial revision."
        ::= { switch001 95 }

rldot1xMibVersion OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "MIB's version, the current version is 1."
    ::= { rldot1x 1 }

rldot1xExtAuthSessionStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1xExtAuthSessionStatsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains the session statistics objects
        for the Authenticator PAE associated with each Port.
        An entry appears in this table for each port that may
        authenticate access to itself."
    ::= { rldot1x 2 }

rldot1xExtAuthSessionStatsEntry OBJECT-TYPE
    SYNTAX      Rldot1xExtAuthSessionStatsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "The session statistics information for an Authenticator
        PAE.  This shows the current values being collected for
        each session that is still in progress, or the final
        values for the last valid session on each port where
        there is no session currently active."
    AUGMENTS    { dot1xAuthSessionStatsEntry }
    ::= { rldot1xExtAuthSessionStatsTable 1 }

Rldot1xExtAuthSessionStatsEntry ::= SEQUENCE {
        rlDot1xAuthSessionAuthenticMethod INTEGER
}

rlDot1xAuthSessionAuthenticMethod OBJECT-TYPE
    SYNTAX      INTEGER {
                    remoteAuthServer(1),
                    localAuthServer(2),
                    none(3)
                }
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The authentication method used to establish the
        session."
    ::= { rldot1xExtAuthSessionStatsEntry 1 }

rldot1xGuestVlanSupported OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "indicate if guest vlan is supported."
    ::= { rldot1x  3 }

rldot1xGuestVlanVID OBJECT-TYPE
    SYNTAX VlanIndex
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "specify the guest vlan tag , 0 for non exiting."
    ::= { rldot1x  4 }

rldot1xGuestVlanPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "the ports that can be members in the guest vlan"
    ::= { rldot1x  5 }

rldot1xUnAuthenticatedVlanSupported OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "indicate if unauthenticated Vlan is supported."
    ::= { rldot1x  6 }

rldot1xUnAuthenticatedVlanTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF Rldot1xUnAuthenticatedVlanEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "port belong to vlan in all port authenticated state except force unauthenticated table"
    ::= { rldot1x  7 }

rldot1xUnAuthenticatedVlanEntry OBJECT-TYPE
    SYNTAX  Rldot1xUnAuthenticatedVlanEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        " port belong to vlan in all port authenticated state except force unauthenticated entry"
    INDEX   { dot1qFdbId  }
    ::= { rldot1xUnAuthenticatedVlanTable 1 }

Rldot1xUnAuthenticatedVlanEntry ::= SEQUENCE {
        rldot1xUnAuthenticatedVlanStatus  RowStatus
    }

rldot1xUnAuthenticatedVlanStatus OBJECT-TYPE
    SYNTAX   RowStatus
    MAX-ACCESS read-create
    STATUS   current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { rldot1xUnAuthenticatedVlanEntry 1 }

rldot1xUserBasedVlanSupported OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "indicate if user based Vlan is supported."
    ::= { rldot1x  8 }

rldot1xUserBasedVlanPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "the ports that can be members in the user based vlan"
    ::= { rldot1x  9 }

rldot1xAuthenticationPortTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF Rldot1xAuthenticationPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of system level information for each port
        supported by the Port Access Entity.  An entry appears
        in this table for each port of this system."
    ::= { rldot1x  10 }

rldot1xAuthenticationPortEntry OBJECT-TYPE
    SYNTAX  Rldot1xAuthenticationPortEntry
    MAX-ACCESS  not-accessible
    STATUS   current
    DESCRIPTION
        "The Port number and mac method"
    INDEX { dot1xPaePortNumber }
    ::= { rldot1xAuthenticationPortTable  1 }

Rldot1xAuthenticationPortEntry::=
    SEQUENCE {
        rldot1xAuthenticationPortMethod
            INTEGER,
        rldot1xRadiusAttrVlanIdEnabled
            TruthValue,
        rldot1xRadiusAttAclNameEnabled
            TruthValue,
        rldot1xTimeBasedName
            SnmpAdminString,
        rldot1xTimeBasedActive
            TruthValue,
        rldot1xRadiusAttrVlanIdentifier
            VlanIndex,
        rldot1xMaxHosts
            Unsigned32,
        rldot1xMaxLoginAttempts
            INTEGER,
        rldot1xTimeoutSilencePeriod
            INTEGER,
        rldot1xNumOfAuthorizedHosts
            INTEGER,
        rldot1xAuthenticationOpenEnabled
            TruthValue,
		rldot1xAuthenticationOperatingControlMode
            INTEGER
    }

rldot1xAuthenticationPortMethod OBJECT-TYPE
    SYNTAX      INTEGER {
                    eapolOnly(1),
                    macAndEapol(2),
                    macOnly(3),
                    webOnly(4),
                    webAndEapol(5),
                    webAndMac(6),
                    webAndMacAndEapol(7)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the 802.1x-based, mac-based and web-based authentication."
    DEFVAL   { eapolOnly }
     ::= { rldot1xAuthenticationPortEntry 1 }

rldot1xRadiusAttrVlanIdEnabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Defines if treat VLAN ID that received from Radius attributes
         in Radius-Accept message."
    ::= { rldot1xAuthenticationPortEntry 2 }

rldot1xRadiusAttAclNameEnabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "Defines if treat ACL Names that received from Radius attributes
          in Radius-Accept message."
    ::= { rldot1xAuthenticationPortEntry 3 }

rldot1xTimeBasedName OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "Specifies a time range. When the Time Range is not in effect the port state would be Unauthorized."
    ::= { rldot1xAuthenticationPortEntry 4 }

rldot1xTimeBasedActive OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "Specifies if time range is active now or not."
    ::= { rldot1xAuthenticationPortEntry 5 }

rldot1xRadiusAttrVlanIdentifier OBJECT-TYPE
    SYNTAX VlanIndex
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "In case that value is not 0,
         This field will define the VLAN ID in case that it is not received from Radius attributes
         in Radius-Accept message."
    DEFVAL { 0 }
    ::= { rldot1xAuthenticationPortEntry 6 }

rldot1xMaxHosts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum number of authenticated hosts allowed on the interface.
         A value of 0 means no limitation."
    DEFVAL { 0 }
    ::= { rldot1xAuthenticationPortEntry 7 }

rldot1xMaxLoginAttempts OBJECT-TYPE
    SYNTAX      INTEGER (0.. 10)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum number of allowedlogin attempts on the interface.
         A value of 0 means the infinite number of attemtps.
         The configuration is applied only to Web-Based authentication."
    DEFVAL { 0 }
    ::= { rldot1xAuthenticationPortEntry 8 }

rldot1xTimeoutSilencePeriod OBJECT-TYPE
    SYNTAX      INTEGER (0.. 65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set the number of seconds that if an authorized client did not send traffic during this period,
         then the client is changed to unauthrized.
         The configuration is applied only to Web-Based authentication."
    DEFVAL { 0 }
    ::= { rldot1xAuthenticationPortEntry 9 }

rldot1xNumOfAuthorizedHosts OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "Number of authorized host in multi-sessions mode."
    ::= { rldot1xAuthenticationPortEntry 10 }

rldot1xAuthenticationOpenEnabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Open access allows clients or devices to gain network access before authentication is performed.
         In the mode the switch performs failure replies received from a Radius server as success."
    DEFVAL { false }
    ::= { rldot1xAuthenticationPortEntry 11 }

 rldot1xAuthenticationOperatingControlMode OBJECT-TYPE
    SYNTAX      INTEGER {
                    unknown(1),
                    auto(2),
                    forceAuthorized(3),
                    forceUnauthorized(4),
                    macBased(5)
                }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Operational control mode of 802.1x."    
    ::= { rldot1xAuthenticationPortEntry 12 }	

 --------------------------------------------------------------
 -- The Authenticator Statistics Table
 --------------------------------------------------------------

 rldot1xAuthMultiStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1xAuthMultiStatsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains the statistics objects for the
         Authenticator PAE associated with each Port and MAC for
         multisession 802.1x mode of operation.
         An entry appears in this table for each port and MAC that have an
         authentication session currently running under way for them."
    REFERENCE
        "9.4.2 Authenticator Statistics"
    ::= { rldot1x 11 }

 rldot1xAuthMultiStatsEntry OBJECT-TYPE
    SYNTAX      Rldot1xAuthMultiStatsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "The statistics information for an Authenticator PAE."
    INDEX { rldot1xAuthMultiStatsPortNumber, rldot1xAuthMultiStatsSourceMac }
    ::= { rldot1xAuthMultiStatsTable 1 }

 Rldot1xAuthMultiStatsEntry ::=
    SEQUENCE {
        rldot1xAuthMultiStatsPortNumber
            INTEGER,
        rldot1xAuthMultiStatsSourceMac
            MacAddress,
        rldot1xAuthMultiEapolFramesRx
            Counter32,
        rldot1xAuthMultiEapolFramesTx
            Counter32,
        rldot1xAuthMultiEapolStartFramesRx
            Counter32,
        rldot1xAuthMultiEapolLogoffFramesRx
            Counter32,
        rldot1xAuthMultiEapolRespIdFramesRx
            Counter32,
        rldot1xAuthMultiEapolRespFramesRx
            Counter32,
        rldot1xAuthMultiEapolReqIdFramesTx
            Counter32,
        rldot1xAuthMultiEapolReqFramesTx
            Counter32,
        rldot1xAuthMultiInvalidEapolFramesRx
            Counter32,
        rldot1xAuthMultiEapLengthErrorFramesRx
            Counter32
        }

 rldot1xAuthMultiStatsPortNumber OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "Port Number."
    ::= { rldot1xAuthMultiStatsEntry 1 }

  rldot1xAuthMultiStatsSourceMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "Mac of the authentication session."
    ::= { rldot1xAuthMultiStatsEntry 2 }

 rldot1xAuthMultiEapolFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The number of valid EAPOL frames of any type
        that have been received by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL frames received"
    ::= { rldot1xAuthMultiStatsEntry 3 }

 rldot1xAuthMultiEapolFramesTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAPOL frames of any type
        that have been transmitted by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL frames transmitted"
    ::= { rldot1xAuthMultiStatsEntry 4 }

 rldot1xAuthMultiEapolStartFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAPOL Start frames that have
        been received by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL Start frames received"
    ::= { rldot1xAuthMultiStatsEntry 5 }

 rldot1xAuthMultiEapolLogoffFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAPOL Logoff frames that have
        been received by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL Logoff frames received"
    ::= { rldot1xAuthMultiStatsEntry 6 }

 rldot1xAuthMultiEapolRespIdFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAP Resp/Id frames that have
        been received by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL Resp/Id frames received"
    ::= { rldot1xAuthMultiStatsEntry 7 }

 rldot1xAuthMultiEapolRespFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of valid EAP Response frames
        (other than Resp/Id frames) that have been
        received by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL Response frames received"
    ::= { rldot1xAuthMultiStatsEntry 8 }

 rldot1xAuthMultiEapolReqIdFramesTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAP Req/Id frames that have been
        transmitted by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL Req/Id frames transmitted"
    ::= { rldot1xAuthMultiStatsEntry 9 }

 rldot1xAuthMultiEapolReqFramesTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAP Request frames
        (other than Rq/Id frames) that have been
        transmitted by this Authenticator."
    REFERENCE
        "9.4.2, EAPOL Request frames transmitted"
    ::= { rldot1xAuthMultiStatsEntry 10 }

 rldot1xAuthMultiInvalidEapolFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAPOL frames that have been
        received by this Authenticator in which the
        frame type is not recognized."
    REFERENCE
        "9.4.2, Invalid EAPOL frames received"
    ::= { rldot1xAuthMultiStatsEntry 11 }

 rldot1xAuthMultiEapLengthErrorFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of EAPOL frames that have been received
        by this Authenticator in which the Packet Body
        Length field is invalid."
    REFERENCE
        "9.4.2, EAP length error frames received"
    ::= { rldot1xAuthMultiStatsEntry 12 }

 --------------------------------------------------------------
 -- The Authenticator Diagnostics Table
 --------------------------------------------------------------

 rldot1xAuthMultiDiagTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1xAuthMultiDiagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains the diagnostics objects for the
         Authenticator PAE associated with each Port and MAC.
         An entry appears in this table for each port and MAC that have an
         authentication session currently running under way for them."
    REFERENCE
        "9.4.3 Authenticator Diagnostics"
    ::= { rldot1x 12 }

 rldot1xAuthMultiDiagEntry OBJECT-TYPE
    SYNTAX      Rldot1xAuthMultiDiagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The diagnostics information for an Authenticator PAE."
    INDEX { rldot1xAuthMultiDiagPortNumber, rldot1xAuthMultiDiagSourceMac }
    ::= { rldot1xAuthMultiDiagTable 1 }

 Rldot1xAuthMultiDiagEntry ::=
    SEQUENCE {
        rldot1xAuthMultiDiagPortNumber
            INTEGER,
        rldot1xAuthMultiDiagSourceMac
            MacAddress,
        rldot1xAuthMultiEntersConnecting
            Counter32,
 ----------             rldot1xAuthMultiEapLogoffsWhileConnecting
 ----------                 Counter32,
        rldot1xAuthMultiEntersAuthenticating
            Counter32,
        rldot1xAuthMultiAuthSuccessWhileAuthenticating
            Counter32,
 ----------             rldot1xAuthMultiAuthTimeoutsWhileAuthenticating
 ----------                Counter32,
         rldot1xAuthMultiAuthFailWhileAuthenticating
            Counter32,
        rldot1xAuthMultiAuthReauthsWhileAuthenticating
            Counter32,
        rldot1xAuthMultiAuthEapStartsWhileAuthenticating
            Counter32,
 ----------             rldot1xAuthMultiAuthEapLogoffWhileAuthenticating
 ----------                 Counter32,
        rldot1xAuthMultiAuthReauthsWhileAuthenticated
            Counter32,
        rldot1xAuthMultiAuthEapStartsWhileAuthenticated
            Counter32,
 ----------        rldot1xAuthMultiAuthEapLogoffWhileAuthenticated
 ----------           Counter32,
        rldot1xAuthMultiBackendResponses
            Counter32,
        rldot1xAuthMultiBackendAccessChallenges
            Counter32,
        rldot1xAuthMultiBackendOtherRequestsToSupplicant
            Counter32,
        rldot1xAuthMultiBackendNonNakResponsesFromSupplicant
            Counter32,
        rldot1xAuthMultiBackendAuthSuccesses
            Counter32
 ----------        rldot1xAuthMultiBackendAuthFails
 ----------            Counter32
        }

 rldot1xAuthMultiDiagPortNumber OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "Port Number."
    ::= { rldot1xAuthMultiDiagEntry 1 }

  rldot1xAuthMultiDiagSourceMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "Mac of the authentication session."
    ::= { rldot1xAuthMultiDiagEntry 2 }

 rldot1xAuthMultiEntersConnecting OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions to the CONNECTING state from any other
        state."
    REFERENCE
        "9.4.2, 8.5.4.2.1"
    ::= { rldot1xAuthMultiDiagEntry 3 }

 rldot1xAuthMultiEntersAuthenticating OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions from CONNECTING to AUTHENTICATING, as a
        result of an EAP-Response/Identity message being
        received from the Supplicant."
    REFERENCE
        "9.4.2, 8.5.4.2.3"
    ::= { rldot1xAuthMultiDiagEntry 4 }

 rldot1xAuthMultiAuthSuccessWhileAuthenticating OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions from AUTHENTICATING to AUTHENTICATED, as a
        result of the Backend Authentication state machine
        indicating successful authentication of the Supplicant
        (authSuccess = TRUE)."
    REFERENCE
        "9.4.2, 8.5.4.2.4"
    ::= { rldot1xAuthMultiDiagEntry 5 }

 rldot1xAuthMultiAuthFailWhileAuthenticating OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions from AUTHENTICATING to HELD, as a result
        of the Backend Authentication state machine indicating
        authentication failure (authFail = TRUE)."
    REFERENCE
        "9.4.2, 8.5.4.2.6"
    ::= { rldot1xAuthMultiDiagEntry 6 }

 rldot1xAuthMultiAuthReauthsWhileAuthenticating OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions from AUTHENTICATING to ABORTING, as a result
        of a reauthentication request (reAuthenticate = TRUE)."
    REFERENCE
        "9.4.2, 8.5.4.2.7"
    ::= { rldot1xAuthMultiDiagEntry 7 }

 rldot1xAuthMultiAuthEapStartsWhileAuthenticating OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions from AUTHENTICATING to ABORTING, as a result
        of an EAPOL-Start message being received
        from the Supplicant."
    REFERENCE
        "9.4.2, 8.5.4.2.8"
    ::= { rldot1xAuthMultiDiagEntry 8 }

 rldot1xAuthMultiAuthReauthsWhileAuthenticated OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions from AUTHENTICATED to CONNECTING, as a
        result of a reauthentication request
        (reAuthenticate = TRUE)."
    REFERENCE
        "9.4.2, 8.5.4.2.10"
    ::= { rldot1xAuthMultiDiagEntry 9 }

 rldot1xAuthMultiAuthEapStartsWhileAuthenticated OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        transitions from AUTHENTICATED to CONNECTING, as a
        result of an EAPOL-Start message being received from the
        Supplicant."
    REFERENCE
        "9.4.2, 8.5.4.2.11"
    ::= { rldot1xAuthMultiDiagEntry 10 }

 rldot1xAuthMultiBackendResponses OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine sends
        an initial Access-Request packet to the Authentication
        server (i.e., executes sendRespToServer on entry to the
        RESPONSE state). Indicates that the Authenticator
        attempted communication with the Authentication Server."
    REFERENCE
        "9.4.2, 8.5.6.2.1"
    ::= { rldot1xAuthMultiDiagEntry 11 }

 rldot1xAuthMultiBackendAccessChallenges OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        receives an initial Access-Challenge packet from the
        Authentication server (i.e., aReq becomes TRUE,
        causing exit from the RESPONSE state). Indicates that
        the Authentication Server has communication with
        the Authenticator."
    REFERENCE
        "9.4.2, 8.5.6.2.2"
    ::= { rldot1xAuthMultiDiagEntry 12 }

 rldot1xAuthMultiBackendOtherRequestsToSupplicant OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        sends an EAP-Request packet (other than an Identity,
        Notification, Failure or Success message) to the
        Supplicant (i.e., executes txReq on entry to the
        REQUEST state). Indicates that the Authenticator chose
        an EAP-method."
    REFERENCE
        "9.4.2, 8.5.6.2.3"
    ::= { rldot1xAuthMultiDiagEntry 13 }

 rldot1xAuthMultiBackendNonNakResponsesFromSupplicant OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        receives a response from the Supplicant to an initial
        EAP-Request, and the response is something other than
        EAP-NAK (i.e., rxResp becomes TRUE, causing the state
        machine to transition from REQUEST to RESPONSE,
        and the response is not an EAP-NAK). Indicates that
        the Supplicant can respond to the Authenticators
        chosen EAP-method."
    REFERENCE
        "9.4.2, 8.5.6.2.4"
    ::= { rldot1xAuthMultiDiagEntry 14 }

 rldot1xAuthMultiBackendAuthSuccesses OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times that the state machine
        receives an EAP-Success message from the Authentication
        Server (i.e., aSuccess becomes TRUE, causing a
        transition from RESPONSE to SUCCESS). Indicates that
        the Supplicant has successfully authenticated to
        the Authentication Server."
    REFERENCE
        "9.4.2, 8.5.6.2.5"
    ::= { rldot1xAuthMultiDiagEntry 15 }

 --------------------------------------------------------------
 -- The Authenticator Session Statistics Table
 --------------------------------------------------------------

 rldot1xAuthMultiSessionStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1xAuthMultiSessionStatsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains the session statistics objects
        for the Authenticator PAE associated with each Port.
        An entry appears in this table for each port that may
        authenticate access to itself."
    REFERENCE
        "9.4.4"
    ::= { rldot1x 13 }

 rldot1xAuthMultiSessionStatsEntry OBJECT-TYPE
    SYNTAX      Rldot1xAuthMultiSessionStatsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "The session statistics information for an Authenticator
        PAE.  This shows the current values being collected for
        each session that is still in progress, or the final
        values for the last valid session on each port where
        there is no session currently active."
    INDEX { rldot1xAuthMultiSessionStatsPortNumber,
            rldot1xAuthMultiSessionStatsSourceMac }
    ::= { rldot1xAuthMultiSessionStatsTable 1 }

 Rldot1xAuthMultiSessionStatsEntry ::=
    SEQUENCE {
        rldot1xAuthMultiSessionStatsPortNumber
            INTEGER,
        rldot1xAuthMultiSessionStatsSourceMac
            MacAddress,
        rldot1xAuthMultiSessionOctetsRx
            Counter64,
        rldot1xAuthMultiSessionOctetsTx
            Counter64,
        rldot1xAuthMultiSessionFramesRx
            Counter32,
        rldot1xAuthMultiSessionFramesTx
            Counter32,
        rldot1xAuthMultiSessionId
            SnmpAdminString,
 ----------        rldot1xAuthMultiSessionAuthenticMethod
 ----------            INTEGER,
        rldot1xAuthMultiSessionTime
            TimeTicks,
 ----------        rldot1xAuthMultiSessionTerminateCause
 ----------            INTEGER,
        rldot1xAuthMultiSessionUserName
            SnmpAdminString,
        rldot1xAuthMultiSessionRadiusAttrVlan
            INTEGER,
        rldot1xAuthMultiSessionRadiusAttrFilterId
            SnmpAdminString,
        rldot1xAuthMultiSessionRadiusAttrSecondFilterId
            SnmpAdminString,
        rlDot1xAuthMultiSessionMonitorResultsReason
            INTEGER,
        rlDot1xAuthMultiSessionMethodType
            INTEGER     }

 rldot1xAuthMultiSessionStatsPortNumber OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Port Number."
    ::= { rldot1xAuthMultiSessionStatsEntry 1 }

  rldot1xAuthMultiSessionStatsSourceMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Mac of the authentication session."
    ::= { rldot1xAuthMultiSessionStatsEntry 2 }


 rldot1xAuthMultiSessionOctetsRx OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of octets received in user data
        frames on this Port during the session."
    REFERENCE
        "9.4.4, Session Octets Received"
    ::= { rldot1xAuthMultiSessionStatsEntry 3 }

 rldot1xAuthMultiSessionOctetsTx OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of octets transmitted in user data
        frames on this Port during the session."
    REFERENCE
        "9.4.4, Session Octets Transmitted"
    ::= { rldot1xAuthMultiSessionStatsEntry 4 }

 rldot1xAuthMultiSessionFramesRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of user data frames received
        on this Port during the session."
    REFERENCE
        "9.4.4, Session Frames Received"
    ::= { rldot1xAuthMultiSessionStatsEntry 5 }

 rldot1xAuthMultiSessionFramesTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of user data frames transmitted
        on this Port during the session."
    REFERENCE
        "9.4.4, Session Frames Transmitted"
    ::= { rldot1xAuthMultiSessionStatsEntry 6 }

 rldot1xAuthMultiSessionId OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A unique identifier for the session, in the
        form of a printable ASCII string of at least
        three characters."
    REFERENCE
        "9.4.4, Session Identifier"
    ::= { rldot1xAuthMultiSessionStatsEntry 7 }

 rldot1xAuthMultiSessionTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The duration of the session in seconds."
    REFERENCE
        "9.4.4, Session Time"
    ::= { rldot1xAuthMultiSessionStatsEntry 8 }

 rldot1xAuthMultiSessionUserName OBJECT-TYPE
    SYNTAX     SnmpAdminString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The User-Name representing the identity of the
        Supplicant PAE."
    REFERENCE
        "9.4.4, Session User Name"
    ::= { rldot1xAuthMultiSessionStatsEntry 9 }

 rldot1xAuthMultiSessionRadiusAttrVlan OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "VLAN ID that received from Radius attributes."
    ::= { rldot1xAuthMultiSessionStatsEntry 10 }

 rldot1xAuthMultiSessionRadiusAttrFilterId OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "First filter ID that received from Radius attributes."
    ::= { rldot1xAuthMultiSessionStatsEntry 11 }

 rldot1xAuthMultiSessionRadiusAttrSecondFilterId OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Second filter ID that received from Radius attributes."
    ::= { rldot1xAuthMultiSessionStatsEntry 12 }

 rlDot1xAuthMultiSessionMonitorResultsReason OBJECT-TYPE
    SYNTAX      INTEGER {
                    notRejected(0),
                    aclNotExst(1),    -- ACL sent by radius Server does not exist on the device
                    aclOvrfl(2),      -- ACL sent by radius server can not be applied because of TCAM overflow
                    authErr(3),       -- Rejected by Radius due wrong user name or password in Radius server
                    fltrErr(4),       -- Radius accept message contains more than 2 filter-id
                    ipv6WithMac(5),   -- Radius accept message contains filter with IPv6 DIP and MAC addresses
                    ipv6WithNotIp(6), -- Radius accept message contains IPv6 and not IP simultaneously
                    polBasicMode(7),  -- Policy Map is not supported in the QoS basic mode
                    aclDel(8),        -- ACL was deleted by user
                    polDel(9),        -- Policy Map was deleted by user
                    vlanDfly(10),     -- VLAN sent by radius server can not be applied because it is the Default VLAN
                    vlanDynam(11),    -- VLAN sent by radius server can not be applied because it is a Dynamic VLAN
                    vlanGuest(12),    -- VLAN sent by radius server can not be applied because it is the Guest VLAN
                    vlanNoInMsg(13),  -- VLAN was not sent by Radius
                    vlanNotExst(14),  -- VLAN sent by radius Server does not exist on the device
                    vlanOvfl(15),     -- VLAN sent by radius server can not be applied because of TCAM overflow
                    vlanVoice(16),    -- VLAN sent by radius server can not be applied because it is a Voice VLAN
                    vlanUnauth(17),   -- VLAN sent by radius server can not be applied because it is a
                                      -- Unauthenticated VLAN
                    frsMthDeny(18),   -- First method is "deny"
                    radApierr(19),    -- RADIUS API returned error (e.g. No RADIUS server is configured).
                    radInvlres(20),   -- RADIUS server returned invalid packet (e.g. EAP Attribute is missing)
                    radNoresp(21),    -- RADIUS server is not responding
                    aclEgress(22),    -- ACL sent by radius Server is already bound as egress acl
                    maxHosts(23),     -- Max hosts allowed per port are reached
                    noActivity(24)    -- There is no traffic from this host
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The monitor result reason of the session."
    ::= { rldot1xAuthMultiSessionStatsEntry 13 }

 rlDot1xAuthMultiSessionMethodType OBJECT-TYPE
    SYNTAX      INTEGER {
                    eapol(1),
                    mac(2),
                    web(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current session method type."
     ::= { rldot1xAuthMultiSessionStatsEntry 14 }

 --------------------------------------------------------------
 -- The Authenticator Configuration Table
 --------------------------------------------------------------

 rldot1xAuthMultiConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1xAuthMultiConfigEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains the configuration objects for the
        Authenticator PAE associated with each port and MAC.
        An entry appears in this table for each port and MAC that may
        authenticate access to itself."
    REFERENCE
        "9.4.1 Authenticator Configuration"
    ::= { rldot1x 14 }

 rldot1xAuthMultiConfigEntry OBJECT-TYPE
    SYNTAX      Rldot1xAuthMultiConfigEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "The configuration information for an Authenticator
        PAE."
    INDEX { rldot1xAuthMultiPortNumber, rldot1xAuthMultiSourceMac }
    ::= { rldot1xAuthMultiConfigTable 1 }

 Rldot1xAuthMultiConfigEntry ::=
    SEQUENCE {
        rldot1xAuthMultiPortNumber
            INTEGER,
        rldot1xAuthMultiSourceMac
            MacAddress,
        rldot1xAuthMultiPaeState
            INTEGER,
        rldot1xAuthMultiBackendAuthState
            INTEGER,
        rldot1xAuthMultiControlledPortStatus
            PaeControlledPortStatus
        }

 rldot1xAuthMultiPortNumber OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "Port Number."
    ::= { rldot1xAuthMultiConfigEntry 1 }

 rldot1xAuthMultiSourceMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "Mac of the authentication session."
    ::= { rldot1xAuthMultiConfigEntry 2 }

 rldot1xAuthMultiPaeState OBJECT-TYPE
    SYNTAX      INTEGER {
                    initialize(1),
                    disconnected(2),
                    connecting(3),
                    authenticating(4),
                    authenticated(5),
                    aborting(6),
                    held(7),
                    forceAuth(8),
                    forceUnauth(9)
                }
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The current value of the Authenticator PAE state
        machine."
    REFERENCE
        "9.4.1, Authenticator PAE state"
    ::= { rldot1xAuthMultiConfigEntry 3 }

 rldot1xAuthMultiBackendAuthState OBJECT-TYPE
    SYNTAX      INTEGER {
                    request(1),
                    response(2),
                    success(3),
                    fail(4),
                    timeout(5),
                    idle(6),
                    initialize(7)
                }
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The current state of the Backend Authentication
        state machine."
    REFERENCE
        "9.4.1, Backend Authentication state"
    ::= { rldot1xAuthMultiConfigEntry 4 }

 rldot1xAuthMultiControlledPortStatus OBJECT-TYPE
    SYNTAX      PaeControlledPortStatus
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The current value of the controlled Port
        status parameter for the Port."
    REFERENCE
        "9.4.1, AuthControlledPortStatus"
    ::= { rldot1xAuthMultiConfigEntry 5 }

rldot1xBpduFilteringEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify that when 802.1x is globally disabled,
        802.1x BPDU packets would be filtered or bridged."
    ::= { rldot1x 15 }

rldot1xRadiusAttributesErrorsAclReject OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify ACL error handling for the Radius attributes feature."
    ::= { rldot1x 18 }
----------------------------------------------------------------
-- Added guest vlan timeout interval VeredK 15-04-2007, 19:39 --
----------------------------------------------------------------

rldot1xGuestVlanTimeInterval OBJECT-TYPE
    SYNTAX INTEGER (0..180)
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
         "indicate the guest vlan timeout interval."
    ::= { rldot1x  19 }

rldot1xMacAuthSuccessTrapEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if sending traps when a MAC address is successfully
         authenticated by the 802.1X mac-authentication access control."
    ::= { rldot1x 20 }

rldot1xMacAuthFailureTrapEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if sending traps when MAC address was failed
         in authentication of the 802.1X MAC authentication access control."
    ::= { rldot1x 21 }

 --------------------------------------------------------------
 -- The Legacy Port Table
 --------------------------------------------------------------

rldot1xLegacyPortTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF Rldot1xLegacyPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of system level information for each port
        supported by the Port Access Entity.  An entry appears
        in this table for each port of this system."
    ::= { rldot1x  22 }

rldot1xLegacyPortEntry OBJECT-TYPE
    SYNTAX  Rldot1xLegacyPortEntry
    MAX-ACCESS  not-accessible
    STATUS   current
    DESCRIPTION
        "The Port number and leagcy mode"
    INDEX { dot1xPaePortNumber }
    ::= { rldot1xLegacyPortTable  1 }

Rldot1xLegacyPortEntry::=
    SEQUENCE {
        rldot1xLegacyPortModeEnabled
            TruthValue
    }

rldot1xLegacyPortModeEnabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "Indicates whether in multiple sessions mode
          work according to legacy devices mode or not."
    ::= { rldot1xLegacyPortEntry 1 }

rldot1xSystemAuthControlMonitorVlan OBJECT-TYPE
    SYNTAX      INTEGER (0..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "VLAN Tag of 802.1x monitoring VLAN in the System.
         value of 0 means that the monitoring mode is disabled."
    ::= { rldot1x  23 }

rldot1xClearPortMibCounters OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Each bit that is set in this portList represent a port that
         its mib counters should be reset."
    ::= { rldot1x  24 }

rldot1xWebQuietFailureTrapEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if sending traps when a client is set in quiet state
         after the maximum sequential attempts of login."
    ::= { rldot1x 25 }

rldot1xMacWebAuthSuccessTrapEnabled OBJECT-TYPE
    SYNTAX      INTEGER {
                    none(0),
                    eapolOnly(1),
                    macAndEapol(2),
                    macOnly(3),
                    webOnly(4),
                    webAndEapol(5),
                    webAndMac(6),
                    webAndMacAndEapol(7)
                }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if sending traps per authentication method
         when a session is successfully authenticated."
    ::= { rldot1x 26 }

rldot1xMacWebAuthFailureTrapEnabled OBJECT-TYPE
    SYNTAX      INTEGER {
                    none(0),
                    eapolOnly(1),
                    macAndEapol(2),
                    macOnly(3),
                    webOnly(4),
                    webAndEapol(5),
                    webAndMac(6),
                    webAndMacAndEapol(7)
                }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if sending traps per authentication method when a session was failed."
    ::= { rldot1x 27 }

 --------------------------------------------------------------
 -- The Locked Cients Table
 --------------------------------------------------------------

 rldot1xLockedCientsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1xLockedCientsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains the locked clients information for Web-based authentication."
    REFERENCE
        "9.4.2 Authenticator Statistics"
    ::= { rldot1x 28 }

 rldot1xLockedCientsEntry OBJECT-TYPE
    SYNTAX      Rldot1xLockedCientsEntry
    MAX-ACCESS      not-accessible
    STATUS      current
    DESCRIPTION
        "The locked clients entry that entered silence period timeout for Web-based authentication."
    INDEX { rldot1xLockedCientsPortNumber, rldot1xLockedCientsSourceMac }
    ::= { rldot1xLockedCientsTable 1 }

 Rldot1xLockedCientsEntry ::=
    SEQUENCE {
        rldot1xLockedCientsPortNumber
            INTEGER,
        rldot1xLockedCientsSourceMac
            MacAddress,
        rldot1xLockedCientsRemainedTime
            INTEGER,
        rldot1xLockedCientsRowStatus
            RowStatus
        }

 rldot1xLockedCientsPortNumber OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Port Number."
    ::= { rldot1xLockedCientsEntry 1 }

 rldot1xLockedCientsSourceMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Mac of the locked client."
    ::= { rldot1xLockedCientsEntry 2 }

 rldot1xLockedCientsRemainedTime OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time that is remained till the expiry of silence period."
    ::= { rldot1xLockedCientsEntry 3 }

 rldot1xLockedCientsRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Row status."
    ::= { rldot1xLockedCientsEntry 4 }
	
rldot1xSupplicantSuccessTrapEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if sending traps for 802.1x supplicant 
         when a session is successfully authenticated."
    ::= { rldot1x 29 }	
	
rldot1xSupplicantFailureTrapEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if sending traps for 802.1x supplicant 
         when a session is failed to authenticated."
    ::= { rldot1x 30 }	

rldot1xSupplicantCredentialActivateConfiguration OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify if try to activate the pending configuration 
		 of a credential - description, username and password."
    ::= { rldot1x 31 }	
	
--------------------------------------------------------------
 -- The Supplicant Credential Pending Table
 --------------------------------------------------------------

rldot1xSupplicantCredentialPendingTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF Rldot1xSupplicantCredentialPendingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table contains the pending credential information for 802.1x supplicants."
    ::= { rldot1x  32 }

rldot1xSupplicantCredentialPendingEntry OBJECT-TYPE
    SYNTAX  Rldot1xSupplicantCredentialPendingEntry
    MAX-ACCESS  not-accessible
    STATUS   current
    DESCRIPTION
        "The pending credential entry that holds information such as username and password that can be assigned  
         after it to supplicants."
    INDEX { rldot1xSupplicantCredentialName }
    ::= { rldot1xSupplicantCredentialPendingTable  1 }

Rldot1xSupplicantCredentialPendingEntry::=
    SEQUENCE {
        rldot1xSupplicantCredentialName
            SnmpAdminString,
        rldot1xSupplicantCredentialPendingDescription
            SnmpAdminString,		
		rldot1xSupplicantCredentialPendingUsername
            SnmpAdminString,		
		rldot1xSupplicantCredentialPendingPassword
            SnmpAdminString,		
		rldot1xSupplicantCredentialPendingRowStatus
            RowStatus										
    }

rldot1xSupplicantCredentialName OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(1..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "The credential structure name up to 32 characters."
    ::= { rldot1xSupplicantCredentialPendingEntry 1 }
	
rldot1xSupplicantCredentialPendingDescription OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..80))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "The pending text description for the specific credential. 
          The description can be up to 80 characters."
    ::= { rldot1xSupplicantCredentialPendingEntry 2 }
	
rldot1xSupplicantCredentialPendingUsername OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "The pending username for the specific credential.
          The username can be up to 32 characters ."
    ::= { rldot1xSupplicantCredentialPendingEntry 3 }
	
rldot1xSupplicantCredentialPendingPassword OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..64))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "The pending password for the specific credential.
          The password can be up to 128 characters."
    ::= { rldot1xSupplicantCredentialPendingEntry 4 }

rldot1xSupplicantCredentialPendingRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "Row status for the specific credential."
    ::= { rldot1xSupplicantCredentialPendingEntry 5 }						

--------------------------------------------------------------
 -- The Supplicant Credential Table
 --------------------------------------------------------------

rldot1xSupplicantCredentialTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF Rldot1xSupplicantCredentialEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table contains the active credential information for 802.1x supplicants."
    ::= { rldot1x  33 }

rldot1xSupplicantCredentialEntry OBJECT-TYPE
    SYNTAX  Rldot1xSupplicantCredentialEntry
    MAX-ACCESS  not-accessible
    STATUS   current
    DESCRIPTION
        "The active credential entry that holds information such as username and password that can be assigned  
         after it to supplicants."
    INDEX { rldot1xSupplicantCredentialName }
    ::= { rldot1xSupplicantCredentialTable  1 }

Rldot1xSupplicantCredentialEntry::=
    SEQUENCE {        
		rldot1xSupplicantCredentialDescription
            SnmpAdminString,			
		rldot1xSupplicantCredentialUsername
            SnmpAdminString,		
		rldot1xSupplicantCredentialPassword
            SnmpAdminString,
		rldot1xSupplicantCredentialPasswordMD5
            SnmpAdminString						
    }
	
rldot1xSupplicantCredentialDescription OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..80))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "The active text description for the specific credential. 
          The description can be up to 80 characters."
    ::= { rldot1xSupplicantCredentialEntry 1 }
	
rldot1xSupplicantCredentialUsername OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..32))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "The active username for the specific credential.
          The username can be up to 32 characters ."
    ::= { rldot1xSupplicantCredentialEntry 2 }
	
rldot1xSupplicantCredentialPassword OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "The active password for the specific credential.
          The password can be up to 128 characters."
    ::= { rldot1xSupplicantCredentialEntry 3 }
	
rldot1xSupplicantCredentialPasswordMD5 OBJECT-TYPE
    SYNTAX SnmpAdminString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "The MD5 of the rldot1xSupplicantCredentialPassword."
    ::= { rldot1xSupplicantCredentialEntry 4 }
	
--------------------------------------------------------------
 -- The Supplicant Configuration Table
 --------------------------------------------------------------

rldot1xSupplicantConfigurationTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF Rldot1xSupplicantConfigurationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table contains the configuration for 802.1x supplicants."
    ::= { rldot1x  34 }

rldot1xSupplicantConfigurationEntry OBJECT-TYPE
    SYNTAX  Rldot1xSupplicantConfigurationEntry
    MAX-ACCESS  not-accessible
    STATUS   current
    DESCRIPTION
        "The supplicant configuration entry."
    INDEX { ieee8021XPaePortNumber }
    ::= { rldot1xSupplicantConfigurationTable  1 }

Rldot1xSupplicantConfigurationEntry::=
    SEQUENCE {        
		rldot1xSupplicantConfigurationCredentialName
            SnmpAdminString,
		rldot1xSupplicantConfigurationEapTimeout
            INTEGER									
    }

rldot1xSupplicantConfigurationCredentialName OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "The supplicant configuration credential name."
    ::= { rldot1xSupplicantConfigurationEntry 1 }

rldot1xSupplicantConfigurationEapTimeout OBJECT-TYPE
    SYNTAX      INTEGER (1.. 65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the time interval in seconds during which the supplicant waits for a
         response from the Radius server (SUCCESS or FAIL) before restarts authentication."
    DEFVAL { 30 }
    ::= { rldot1xSupplicantConfigurationEntry 2 }

rldot1xMacAuthEapEnabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specifies in MAC-Based authentication method 
		 if the EAP MD5-Challenge authentication is used or
		 that only Radius (without EAP) authentication with the Service-Type 
		 attribute equals to Call-Check(10) is used."
    ::= { rldot1x 35 }			

rldot1xMacAuthUserGroupsize OBJECT-TYPE
    SYNTAX      INTEGER {
                    one(1),
                    two(2),
                    four(4),
					twelve(12)
                }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specifies the numbers of ASCII characters between delimiters 
		 in usename format that is MAC address in MAC-Based authentication method."
    ::= { rldot1x 36 }
	
rldot1xMacAuthUserSeparator OBJECT-TYPE
    SYNTAX      INTEGER {
					hyphen(1),
                    colon(2),
                    dot(3)                   
                }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specifies the delimiter in usename format that is 
		 MAC address in MAC-Based authentication method."
    ::= { rldot1x 37 }			

rldot1xMacAuthUserLowercase OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specifies that the username is coded in the lower case or in the upper case 
		 in usename format that is MAC address in MAC-Based authentication method."
    ::= { rldot1x 38 }	
	
rldot1xMacAuthPassword OBJECT-TYPE
    SYNTAX SnmpAdminString (SIZE(0..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "specify a password that will be used for MAC-Based authentication
          instead of the host MAC address."
    ::= { rldot1x 39 }
	
rldot1xMacAuthApplyReauthentication OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "specify if try to apply reauthentication on MAC-Based authentication users."
    ::= { rldot1x 40 }		
	
rldot1xMacAuthPasswordMD5 OBJECT-TYPE
    SYNTAX SnmpAdminString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "The MD5 of the rldot1xMacAuthPassword."
    ::= { rldot1x 41 }			

END