path: root/MIBS/cisco/CISCOSB-Tuning

CISCOSB-Tuning DEFINITIONS ::= BEGIN

-- Title:      CISCOSB Tuning Private Extension
-- Version:    7.40
-- Date:       05 July 2005

IMPORTS
    switch001                                               FROM CISCOSB-MIB
    Unsigned32,
    MODULE-IDENTITY, OBJECT-TYPE, IpAddress                 FROM SNMPv2-SMI
    DisplayString, RowStatus, TruthValue,
    TEXTUAL-CONVENTION                                      FROM SNMPv2-TC
    VlanList1, VlanList2, VlanList3, VlanList4              FROM CISCOSB-BRIDGEMIBOBJECTS-MIB;

rsTunning  MODULE-IDENTITY
           LAST-UPDATED "202105170000Z"
           ORGANIZATION "Cisco Systems, Inc."

           CONTACT-INFO
           "Postal: 170 West Tasman Drive
           San Jose , CA 95134-1706
           USA

           
           Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

           DESCRIPTION
                "The private MIB module definition for switch001 device tuning MIB."
           REVISION "200903030000Z"
           DESCRIPTION
                    "Added rlHostParamType, rlHostParamUINT, rlHostParamOctetString, rlHostParamIpAddress and rlHostParamObjectId."
           REVISION "200602120000Z"
           DESCRIPTION
                    "Editorial changes to support new MIB compilers."
           REVISION "200406010000Z"
           DESCRIPTION
                "Initial version of this MIB."
           ::= { switch001 29 }


rsHighPriority OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "This variable indicates the time interval the forwarding task inside the
      RS works in High Priority Mode."
    ::=  { rsTunning 1  }

rsLowPriority OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "This variable indicates the time interval the forwarding task inside the
      RS works in Low Priority Mode."
    ::=  { rsTunning 2  }

rsDbgLevel OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "This variable indicates the debug level the Router Server works.
       the range of this variable is 1..100 "
    ::=  { rsTunning 3  }

rsDiagnosticsTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF  RsDiagnosticsEntry
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
        "The diagnostics table of the agent"
    ::=  { rsTunning 4 }

rsDiagnosticsEntry OBJECT-TYPE
    SYNTAX      RsDiagnosticsEntry
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
        "The row definition for this table."
    INDEX { rsDiagnosticsRequestId }
    ::= { rsDiagnosticsTable 1}

RsDiagnosticsEntry ::= SEQUENCE {
    rsDiagnosticsRequestId  INTEGER,
    rsDiagnosticsCode       INTEGER,
    rsDiagnosticsLocation   INTEGER,
    rsDiagnosticsText       DisplayString
}

rsDiagnosticsRequestId OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS read-only
   STATUS       current
   DESCRIPTION
      "The request id of the rejected SNMP request whose diagnostics are
       specified by this entry. If  request  id  0xFFFFFFFF is given,
       the diagnostic of the last  rejected SNMP
       request sent  by the querying NMS is returned."
   ::= {rsDiagnosticsEntry 1}

rsDiagnosticsCode OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS read-only
    STATUS      current
    DESCRIPTION
        "The code of the rejected the SNMP request whose diagnostics are
         specified by this entry. This code may be used to find out the reason
         for rejection if the diagnostic text is unavailable."
    ::= {rsDiagnosticsEntry 2}

rsDiagnosticsLocation OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS read-only
    STATUS      current
    DESCRIPTION
    "The internal location in the SW rejecting the SNMP request whose
     diagnostics are specified by this entry. This information is available
     for debugging purposes only and will be returned in GET requests only if
     rsDbgLevel >= 99.  "
    ::= {rsDiagnosticsEntry 3}

rsDiagnosticsText OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(1..160))
    MAX-ACCESS read-only
    STATUS      current
    DESCRIPTION
        "The diagnostic text of the rejected SNMP request whose diagnostics are
         specified by this entry."
    ::= {rsDiagnosticsEntry 4}

rsConfirmMessagTab  OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "This variable  enables the operator to confirm all the message in the
       event Message Table."
    ::=  { rsTunning 5 }

eventMessageTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EventMessageEntry
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
        "The Event Message table of the agent"
     ::= { rsTunning 6 }

eventMessageEntry  OBJECT-TYPE
    SYNTAX      EventMessageEntry
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
       "The row definition for this table."
    INDEX { eventNum }
    ::= {eventMessageTable 1}

EventMessageEntry  ::= SEQUENCE {
    eventNum        INTEGER,
    eventDesc       DisplayString
}

eventNum OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS read-only
   STATUS       current
   DESCRIPTION
      "The event number,the index of this table."
   ::= {eventMessageEntry 1}

eventDesc  OBJECT-TYPE
   SYNTAX       DisplayString
   MAX-ACCESS read-only
   STATUS       current
   DESCRIPTION
      "The event discription, this text will include time and severity."
  ::= {eventMessageEntry 2}

reaTunning OBJECT IDENTIFIER ::= { rsTunning 7 }

reaIpForwardEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enable  (1),
        disable (2)
    }
    MAX-ACCESS  read-write
        STATUS  current
    DESCRIPTION
      "The Platform will perform fast IP forwarding if only if this
       variable's value is enable."
    ::=  { reaTunning 4 }

reaIpxForwardEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enable  (1),
        disable (2)
    }
    MAX-ACCESS  read-write
        STATUS  current
    DESCRIPTION
      "The Platform will perform fast IPX forwarding if only if this
       variable's value is enable."
    ::=  { reaTunning 5 }

rsMaxEntriesTuning OBJECT IDENTIFIER ::= { rsTunning 8 }

rsMaxBridgeForwardingEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 1}

rsMaxBrgFrwEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in bridge forwarding table."
    ::=  { rsMaxBridgeForwardingEntriesTuning 1 }

rsMaxBrgFrwEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in bridge forwarding table."
    ::=  { rsMaxBridgeForwardingEntriesTuning 2 }

rsMaxIpForwardingEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 2}

rsMaxIpFrwEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in Ip forwarding table."
    ::=  { rsMaxIpForwardingEntriesTuning 1 }

rsMaxIpFrwEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in Ip forwarding table."
    ::=  { rsMaxIpForwardingEntriesTuning 2 }

rsMaxArpEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 3}

rsMaxArpEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in Arp forwarding table."
    ::=  { rsMaxArpEntriesTuning 1 }

rsMaxArpEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in Arp forwarding table."
    ::=  { rsMaxArpEntriesTuning 2 }

rsMaxIpxForwardingEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 4}

rsMaxIpxFrwEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in Ipx forwarding table."
    ::=  { rsMaxIpxForwardingEntriesTuning 1 }

rsMaxIpxFrwEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in Ipx forwarding table."
    ::=  { rsMaxIpxForwardingEntriesTuning 2 }

rsMaxIpxSapEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 5}

rsMaxIpxSapEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in IpxSap table."
    ::=  { rsMaxIpxSapEntriesTuning 1 }

rsMaxIpxSapEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in IpxSap table."
    ::=  { rsMaxIpxSapEntriesTuning 2 }

rsMaxDspClntEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 6}

rsMaxDspClntEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in rsSdClientsTable."
    ::=  { rsMaxDspClntEntriesTuning 1 }

rsMaxDspClntEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in rsSdClientsTable."
    ::=  { rsMaxDspClntEntriesTuning 2 }

-- Obsolete
-- rsMaxZeroHopRoutEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 7}

-- Obsolete
-- rsMaxDspFrmEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 8}

rsMaxIpFftEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 9}

rsMaxIpSFftEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The current maximal size of one IP SFFT Table."
    ::= { rsMaxIpFftEntriesTuning 1 }

rsMaxIpSFftEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The future (after reset) maximal size of one IP SFFT Table."
    ::= { rsMaxIpFftEntriesTuning 2 }

rsMaxIpNFftEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The current maximal size of one IP NFFT Table."
    ::= { rsMaxIpFftEntriesTuning 3 }

rsMaxIpNFftEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The future (after reset) maximal size of one IP NFFT Table."
    ::= { rsMaxIpFftEntriesTuning 4 }

rsMaxIpSFftSysEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current maximal size of the SYSTEM IP SFFT Table."
    ::= { rsMaxIpFftEntriesTuning 5 }

rsMaxIpSFftSysEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The future (after reset) maximal size of the SYSTEM IP SFFT Table."
    ::= { rsMaxIpFftEntriesTuning 6 }

rsMaxIpNFftSysEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current maximal size of the SYSTEM IP NFFT Table."
    ::= { rsMaxIpFftEntriesTuning 7 }

rsMaxIpNFftSysEntriesAfterReset OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
      "The future (after reset) maximal size of the SYSTEM IP NFFT Table."
   ::= { rsMaxIpFftEntriesTuning 8 }

rsMaxIpNextHopEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The current maximal size of one IP NextHop Table."
    ::= { rsMaxIpFftEntriesTuning 9 }

rsMaxIpNextHopEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The future (after reset) maximal size of one NextHop Table."
    ::= { rsMaxIpFftEntriesTuning 10 }

rsMaxIpxFftEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 10}

rsMaxIpxSFftEntries OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-only
   STATUS       current
   DESCRIPTION
      "The current maximal size of one IPX SFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 1 }

rsMaxIpxSFftEntriesAfterReset OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
      "The future (after reset) maximal size of one IPX SFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 2 }

rsMaxIpxNFftEntries OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-only
   STATUS       current
   DESCRIPTION
      "The current maximal size of one IPX NFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 3 }

rsMaxIpxNFftEntriesAfterReset OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
      "The future (after reset) maximal size of one IPX NFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 4 }

rsMaxIpxSFftSysEntries OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-only
   STATUS       current
   DESCRIPTION
      "The current maximal size of the SYSTEM IPX SFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 5 }

rsMaxIpxSFftSysEntriesAfterReset OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
      "The future (after reset) maximal size of the SYSTEM IPX SFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 6 }

rsMaxIpxNFftSysEntries OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-only
   STATUS       current
   DESCRIPTION
      "The current maximal size of the SYSTEM IPX NFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 7 }

rsMaxIpxNFftSysEntriesAfterReset OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
      "The future (after reset) maximal size of the SYSTEM IPX NFFT Table."
   ::= { rsMaxIpxFftEntriesTuning 8 }

rsMaxDhcpTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 11}

rsMaxDhcpConns OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximal number of DHCP connections."
    ::= { rsMaxDhcpTuning 1 }

rsMaxDhcpConnsAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset)  maximal number of DHCP connections."
    ::= { rsMaxDhcpTuning 2 }

-- obsolete
-- rsMaxDhcpClients OBJECT-TYPE
-- ::= { rsMaxDhcpTuning 3 }

rsMaxIpmTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 12}

rsMaxIpmFftEntriesTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 1 }

rsMaxIpmFftEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The current maximal number of the IPM FFT Tables."
   ::= { rsMaxIpmFftEntriesTuning 1 }

rsMaxIpmFftEntriesAfterReset OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
      "The future (after reset) maximal number of the IPM FFT Tables."
   ::= { rsMaxIpmFftEntriesTuning 2 }

rsIpmFftAging OBJECT-TYPE
   SYNTAX       INTEGER
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
      "The aging timeout of the IPM FFT Tables."
   ::= { rsMaxIpmFftEntriesTuning 3 }

rsMaxIgmpTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 2 }

rsMaxIgmpInterfaceEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the IGMP Neighbor Table."
    ::=  { rsMaxIgmpTuning 1 }

rsMaxIgmpInterfaceEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the IGMP Neighbor Table."
    ::=  { rsMaxIgmpTuning 2 }

rsMaxIgmpCacheEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the IGMP Cache Table."
    ::=  { rsMaxIgmpTuning 3 }

rsMaxIgmpCacheEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the IGMP Cache Table."
    ::=  { rsMaxIgmpTuning 4 }

rsMaxPimTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 3 }

rsMaxPimNeighborEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the PIM Neighbor Table."
    ::=  { rsMaxPimTuning 1 }

rsMaxPimNeighborEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the PIM Neighbor Table."
    ::=  { rsMaxPimTuning 2 }

rsMaxPimRouteEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the PIM Route Table."
    ::=  { rsMaxPimTuning 3 }

rsMaxPimRouteEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the PIM Route Table."
    ::=  { rsMaxPimTuning 4 }

rsMaxPimRouteNextHopEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the PIM Route Next Hop Table."
    ::=  { rsMaxPimTuning 5 }

rsMaxPimRouteNextHopEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the PIM Route Next Hop Table."
    ::=  { rsMaxPimTuning 6 }

rsMaxPimInterfaceEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of interfaces in the PIM Interface Table."
    ::=  { rsMaxPimTuning 7 }

rsMaxPimInterfaceEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximal number of interfaces in the PIM Interface Table."
    ::=  { rsMaxPimTuning 8 }

rsMaxDvmrpTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 4 }

rsMaxDvmrpNeighborEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the Dvmrp Neighbor Table."
    ::=  { rsMaxDvmrpTuning 1 }

rsMaxDvmrpNeighborEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the Dvmrp Neighbor Table."
    ::=  { rsMaxDvmrpTuning 2 }

rsMaxDvmrpRouteEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the Dvmrp Route Table."
    ::=  { rsMaxDvmrpTuning 3 }

rsMaxDvmrpRouteEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the Dvmrp Route Table."
    ::=  { rsMaxDvmrpTuning 4 }

rsMaxDvmrpMRouteEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the Dvmrp Multicast Route Table."
    ::=  { rsMaxDvmrpTuning 5 }

rsMaxDvmrpMRouteEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the Dvmrp Multicast Route Table."
    ::=  { rsMaxDvmrpTuning 6 }

rsMaxDvmrpInterfaceEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximal number of interfaces in the Dvmrp Interface Table."
    ::=  { rsMaxDvmrpTuning 7 }

rsMaxDvmrpInterfaceEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of interfaces in the Dvmrp Interface Table."
    ::=  { rsMaxDvmrpTuning 8 }

rsMaxPigmpTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 5 }

rsMaxPigmpRouteEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the IGMP Proxy Routing Table."
    ::=  { rsMaxPigmpTuning 1 }

rsMaxPigmpRouteEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the IGMP Proxy Routing Table."
    ::=  { rsMaxPigmpTuning 2 }

  rsMaxPimSmTuning OBJECT IDENTIFIER ::= { rsMaxIpmTuning 6}

rsMaxPimSmNeighborEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in the PIM Neighbor Table."
    ::=  { rsMaxPimSmTuning 1 }

rsMaxPimSmNeighborEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in the PIM Neighbor Table."
    ::=  { rsMaxPimSmTuning 2 }

 rsMaxPimSmRouteEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in the PIM Route Table."
    ::=  { rsMaxPimSmTuning 3 }

rsMaxPimSmRouteEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in the PIM Route Table."
    ::=  { rsMaxPimSmTuning 4 }

rsMaxPimSmInterfaceEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in the PIM Interface Table."
    ::=  { rsMaxPimSmTuning 5 }

rsMaxPimSmInterfaceEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in the PIM Interface Table."
    ::=  { rsMaxPimSmTuning 6 }

rsMaxPimSmRPSetEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in the RPSet Table."
    ::=  { rsMaxPimSmTuning 7 }


rsMaxPimSmRPSetEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in the RPSet Table."
    ::=  { rsMaxPimSmTuning 8 }

rsMaxPimSmCRPEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in the RPSet Table."
    ::=  { rsMaxPimSmTuning 9 }


rsMaxPimSmCRPEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in the RPSet Table."
    ::=  { rsMaxPimSmTuning 10 }

rsMaxNumberRpAddresesInGroupRange OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of rp addresses per group range  in the RPSet Table."
    ::=  { rsMaxPimSmTuning 11 }

rsMaxNumberRpAddresesInGroupRangeAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of rp addresses per group range  in the RPSet Table."
    ::=  { rsMaxPimSmTuning 12 }

rsMaxRmonTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 13}

rsMaxRmonLogEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in RMON Log table."
    ::=  { rsMaxRmonTuning 1 }

rsMaxRmonLogEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in RMON Log table."
    ::=  { rsMaxRmonTuning 2 }

rsMaxRmonEtherHistoryEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of entries in RMON EtherHistory table."
    ::=  { rsMaxRmonTuning 3 }

rsMaxRmonEtherHistoryEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future maximal number of entries in RMON EtherHistory table."
    ::=  { rsMaxRmonTuning 4 }

rsMaxIgmpSnoopTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 14}

rsMaxIgmpSnoopGroupEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of entries in the IGMP Snooping group table."
    ::= { rsMaxIgmpSnoopTuning  1 }

rsMaxIgmpSnoopGroupEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the IGMP Snooping group table."
    ::= { rsMaxIgmpSnoopTuning  2 }

rsMaxVlansTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 15}

rsMaxVlansEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of entries in the VLANs table."
    ::= { rsMaxVlansTuning  1 }

rsMaxVlansEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the VLANs table."
    ::= { rsMaxVlansTuning  2 }
	
rsMaxVlanMapping OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of VLAN mapping entries in the TCAM."
    ::= { rsMaxVlansTuning  3 }

rsMaxVlanMappingAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of VLAN mapping entries in the TCAM."
    ::= { rsMaxVlansTuning  4 }

rsMaxPolicyTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 16 }

rsMaxPolicyMaxRulesEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the Policy Route Table."
    ::=  { rsMaxPolicyTuning 1 }

rsMaxPolicyMaxRulesEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the Policy Route Table."
    ::=  { rsMaxPolicyTuning 2 }

rsMaxPolicySimpleMibMaxRulesEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the Policy SimpleMib Table."
    ::=  { rsMaxPolicyTuning 3 }

rsMaxPolicySimpleMibMaxRulesEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the Policy SimpleMib Table."
    ::=  { rsMaxPolicyTuning 4 }

rsMaxPolicySimpleMibMaxProfilesEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of entries in the profile Policy SimpleMib Table."
    ::=  { rsMaxPolicyTuning 5 }

rsMaxPolicySimpleMibMaxProfilesEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of entries in the profile Policy SimpleMib Table."
    ::=  { rsMaxPolicyTuning 6 }

rsMaxGvrpVlansTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 17}

rsMaxGvrpVlans OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of VLANs that can participant in Gvrp."
    ::= { rsMaxGvrpVlansTuning  1 }

rsMaxGvrpVlansAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximal number of VLANs that can participant in Gvrp."
    ::= { rsMaxGvrpVlansTuning  2 }

rsMaxTraceRouteTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 18 }

rsMaxTraceRouteControlEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of trace route control entries."
    ::= { rsMaxTraceRouteTuning  1 }

rsMaxTraceRouteControlEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximum number of trace route control entries."
    ::= { rsMaxTraceRouteTuning  2 }

rsMaxTraceRouteProbeHistoryEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of trace route probe history entries."
    ::= { rsMaxTraceRouteTuning  3 }

rsMaxTraceRouteProbeHistoryEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximum number of trace route probe history entries."
    ::= { rsMaxTraceRouteTuning  4 }

rsMaxSnmpTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 19 }

rsMaxSnmpCommunityEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of snmpCommunityTable entries."
    ::= { rsMaxSnmpTuning 1 }

rsMaxSnmpCommunityEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximum number of snmpCommunityTable entries."
    DEFVAL  { 16 }
    ::= { rsMaxSnmpTuning 2 }

rsMaxSocketTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 20 }

rsMaxNumberOfSockets OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal number of sockets."
    ::=  { rsMaxSocketTuning 1}

rsMaxNumberOfSocketsAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future Maximal number of sockets."
    ::=  { rsMaxSocketTuning 2 }

rsMaxSizeOfSocketDataPool OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximal size of socket data pool."
    ::=  { rsMaxSocketTuning 3}

rsMaxSizeOfSocketDataPoolAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future Maximal size of socket data pool."
    ::=  { rsMaxSocketTuning 4 }

rsMaxIpRouteTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 21}

rsMaxIpPrefixes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of IP prefixes that router supports."
    ::=  { rsMaxIpRouteTuning 1 }

rsMaxIpPrefixesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal number of IP prefixes that router supports. "
    ::=  { rsMaxIpRouteTuning 2 }

rsMaxIpNextHopSetTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 22}

rsMaxIpNextHopSetEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of NextHops that may be
       used for forwarding for a destinaton."
    ::=  { rsMaxIpNextHopSetTuning 1 }

rsMaxIpNextHopSetEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal number of NextHops that may be
       used for forwarding for a destinaton. "
    ::=  { rsMaxIpNextHopSetTuning 2 }

rsMaxIpEcmpTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 23}

rsMaxIpEcmpEntrySize OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximum number of ECMP Sets for forwarding."
    ::=  { rsMaxIpEcmpTuning 1 }

rsMaxIpEcmpEntrySizeAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximum number of ECMP Sets for forwarding. "
    ::=  { rsMaxIpEcmpTuning 2 }

rsMaxdot1xEapRequestTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 24 }

rsMaxdot1xEapRequestEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of eap request packets entries that
         can be retransmitted."
    ::= { rsMaxdot1xEapRequestTuning  1 }

rsMaxdot1xEapRequestEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Future maximum number of eap request packets entries that
         can be retransmitted."
    ::= { rsMaxdot1xEapRequestTuning  2 }

rsMaxIpInterfaceTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 25}

rsMaxIpInterfaces OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of IP interfaces.
       Applies to inBand IP interfaces."
    ::=  { rsMaxIpInterfaceTuning 1 }

rsMaxIpInterfacesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal number of IP interfaces.
       Applies to inBand IP interfaces."
    ::=  { rsMaxIpInterfaceTuning 2 }

rsMaxIpv6FftEntriesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 26}

rsMaxIpv6SFftEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The current maximal size of one IPV6 SFFT Table."
    ::= { rsMaxIpv6FftEntriesTuning 1 }

rsMaxIpv6SFftEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The future (after reset) maximal size of one IPV6 SFFT Table."
    ::= { rsMaxIpv6FftEntriesTuning 2 }

rsMaxIpv6SFftSysEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current maximal size of the SYSTEM IPV6 SFFT Table."
    ::= { rsMaxIpv6FftEntriesTuning 3 }

rsMaxIpv6SFftSysEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The future (after reset) maximal size of the SYSTEM IPV6 SFFT Table."
    ::= { rsMaxIpv6FftEntriesTuning 4 }

rsMaxIpv6Prefixes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of IPV6 prefixes that router supports."
    ::=  { rsMaxIpv6FftEntriesTuning 5 }

rsMaxIpv6PrefixesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal number of IPV6 prefixes that router supports. "
    ::=  { rsMaxIpv6FftEntriesTuning 6 }

rsMaxIpv6NextHopEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The current maximal size of one IPV6 NextHop Table."
    ::= { rsMaxIpv6FftEntriesTuning 7 }

rsMaxIpv6NextHopEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The future (after reset) maximal size of one NextHop Table."
    ::= { rsMaxIpv6FftEntriesTuning 8 }

rsMaxIpv6NextHopSetEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of NextHops that may be
       used for forwarding for a destinaton."
    ::=  { rsMaxIpv6FftEntriesTuning 9 }

rsMaxIpv6NextHopSetEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal number of NextHops that may be
       used for forwarding for a destinaton. "
    ::=  { rsMaxIpv6FftEntriesTuning 10 }

rsMaxIpv6GlobalAddresses OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal global number of IPV6 addresses."
    ::=  { rsMaxIpv6FftEntriesTuning 11 }

rsMaxIpv6GlobalAddressesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal global number of IPV6 addresses. "
    ::=  { rsMaxIpv6FftEntriesTuning 12 }

rsMaxArpTunnelStartEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal global number of tunnel start and ARP entries.
       Tunnel start refer to tunnel remote station"
    ::=  { rsMaxIpv6FftEntriesTuning 13 }

rsMaxArpTunnelStartEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal global number of tunnel start and ARP entries.
       Tunnel start refer to tunnel remote station"
    ::=  { rsMaxIpv6FftEntriesTuning 14 }



rsMaxIpv6InterfaceTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 27}

rsMaxIpv6Interfaces OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of IPV6 interfaces.
       Applies to inBand IPV6 interfaces."
    ::=  { rsMaxIpv6InterfaceTuning 1 }

rsMaxIpv6InterfacesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal number of IPV6 interfaces.
       Applies to inBand IPV6 interfaces."
    ::=  { rsMaxIpv6InterfaceTuning 2 }

rsMaxIpv6AddrPerInterfaces OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Maximal number of IPV6 Addresses per interfaces."
    ::=  { rsMaxIpv6InterfaceTuning 3 }

rsMaxIpv6AddrPerInterfacesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "FutureMaximal number of IPV6 Addresses per interfaces."
    ::=  { rsMaxIpv6InterfaceTuning 4 }

rsMaxIpRoutesTuning OBJECT IDENTIFIER ::= { rsMaxEntriesTuning 28}

rsMaxIpv4Routes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The maximum number of IPv4 routers supported by
       the IPv4 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 1 }

rsMaxIpv4RoutesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future Maximal number of IPv4 routers supported by
       the IPv4 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 2 }

rsMaxIpv6Routes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The maximum number of IPv6 routers supported by
       the IPv6 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 3 }

rsMaxIpv6RoutesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future Maximal number of IPv6 routers supported by
       the IPv6 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 4 }

rsMaxIpmv4Routes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The maximum number of IPv4 routers ((*,G) and (S,G))
       supported by the IPv4 Multicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 5 }

rsMaxIpmv4RoutesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future Maximal number of IPv4 routers ((*,G) and (S,G))
       supported by the IPv4 Multicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 6 }

rsMaxIpmv6Routes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The maximum number of IPv6 routers ((*,G) and (S,G))
       supported by the IPv6 Multicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 7 }

rsMaxIpmv6RoutesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future Maximal number of IPv6 routers ((*,G) and (S,G))
       supported by the IPv6 Multicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 8 }

rsMaxIpv4PbrRoutes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The maximum number of IPv4 policy routes supported by
       the IPv4 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 9 }

rsMaxIpv4PbrRoutesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future Maximal number of IPv4 policy routes supported by
       the IPv4 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 10 }

rsMaxIpv6PbrRoutes OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The maximum number of IPv6 policy routes supported by
       the IPv4 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 11 }

rsMaxIpv6PbrRoutesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Future Maximal number of IPv6 policy routes supported by
       the IPv4 Unicast Hardware Forwarding Table."
    ::=  { rsMaxIpRoutesTuning 12 }

-- Obsolete
-- rsFftAgingTuning OBJECT IDENTIFIER ::= { rsTunning 9 }

-- Obsolete
-- rsFftNetworkTuning OBJECT IDENTIFIER ::= { rsTunning 10 }

rsTcpTuning OBJECT IDENTIFIER ::= { rsTunning 11 }

rsTcpMemoryPoolSizeAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The size of the memory pool that the tcp will allocate after reset.
         The memory pool is used for sending packets"
    ::= { rsTcpTuning 1 }

rsTcpMemoryPoolSize OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The size of the memory pool that the tcp uses currently.
         The memory pool is used for sending packets"
    ::= { rsTcpTuning 2 }

rsRadiusTuning OBJECT IDENTIFIER ::= { rsTunning 12 }

rsRadiusMemoryPoolSizeAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The size of the memory pool that radius will allocate after reset.
         The memory pool is used for attributes"
    ::= { rsRadiusTuning 1 }

rsRadiusMemoryPoolSize OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The size of the memory pool that radius uses currently.
         The memory pool is used for attributes"
    ::= { rsRadiusTuning  2 }

rlSyslogTuning OBJECT IDENTIFIER ::= { rsTunning 13 }

rlSyslogFilePercentToDeleteWhenCompacting OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When the flash file which is used by reports becomes full,
         a certain percentage of the old messages on flash are deleted.
         This is the current value."
::= { rlSyslogTuning 3}

rlSyslogFilePercentToDeleteWhenCompactingAfterReset OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When the flash file which is used by reports becomes full,
         a certain percentage of the old messages on flash are deleted.
         This is the value after reset."
::= { rlSyslogTuning 4}

rlSyslogCacheSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The size of memory cache of last errors reported.
         This cache is cyclic.  This is the current value."
    ::= { rlSyslogTuning 5 }

rlSyslogCacheSizeAfterReset OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The size of memory cache of last errors reported.
         This cache is cyclic.  This is the value after reset."
    ::= { rlSyslogTuning 6 }

rlMngInfTuning OBJECT IDENTIFIER ::= { rsTunning 14 }

rlMaxNumberOfAccessRules OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS read-only
        STATUS  current
        DESCRIPTION
                "The Maximum number of rules per Access List that can be defined"
::= { rlMngInfTuning 1}

rlMaxNumberOfAccessRulesAfterReset OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS read-write
        STATUS  current
        DESCRIPTION
                "The Maximum number of rules per Access List for after reset tuning"
::= { rlMngInfTuning 2}

-- obsolete
-- rlSshTuning OBJECT IDENTIFIER ::= { rsTunning 15 }

-- rlSshMaxAuthorizedKeysAfterReset OBJECT-TYPE
--    SYNTAX      INTEGER
--    MAX-ACCESS  read-write
--    STATUS      current
--    DESCRIPTION
--        "The maximum amount of authorized user keys the SSH deamon will store
--        after reset."
--    ::= { rlSshTuning 1 }

-- rlSshMaxAuthorizedKeys OBJECT-TYPE
--    SYNTAX      INTEGER
--    MAX-ACCESS  read-only
--    STATUS      current
--    DESCRIPTION
--        "The maximum amount of authorized user keys the SSH deamon stores
--        currently."
--    ::= { rlSshTuning  2 }

rsDiagnosticTextSource OBJECT-TYPE
    SYNTAX      INTEGER {fromCLI(1), fromDiagnosticsTable(2)}
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The source from which SNMP diagnostics message texts should be
         taken."
    DEFVAL { fromCLI }
   ::= { rsTunning 16 }

rsMultiSession OBJECT IDENTIFIER ::= { rsTunning 17 }

rsMultiSessionMaxSessionsAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum number of terminal sessions (serial, telnet and ssh)
        available after reset."
    ::= { rsMultiSession 1 }

rsMultiSessionMaxSessions OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of terminal sessions (serial, telnet and ssh)
        available."
    ::= { rsMultiSession  2 }

rlDnsClTuning OBJECT IDENTIFIER ::= { rsTunning 18 }

rlMaxDnsClCacheRREntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximal number of DNS client cache entries."
    ::= { rlDnsClTuning 1 }

rlMaxDnsClCacheRREntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximal number of DNS client cache
       entries."
    ::= { rlDnsClTuning 2 }

rlMaxDnsClNCacheErrEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximal number of DNS client negative cache entries."
    ::= { rlDnsClTuning 3 }

rlMaxDnsClNCacheErrEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximal number of DNS client negative cache
       entries."
    ::= { rlDnsClTuning 4 }

rlMaxDnsClNamesEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximal number of DNS client static names entries."
    ::= { rlDnsClTuning 5 }

rlMaxDnsClNamesEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximal number of DNS client static names
       entries."
    ::= { rlDnsClTuning 6 }


-- table to show tuning : limits curent and after reset values
rlTuningParamsTable    OBJECT-TYPE
   SYNTAX       SEQUENCE  OF RlTuningParamsEntry
   MAX-ACCESS  not-accessible
   STATUS       current
   DESCRIPTION
    "table to show tuning : limits curent and after reset values."
   ::=  { rsTunning 19 }

rlTuningParamsEntry OBJECT-TYPE
   SYNTAX       RlTuningParamsEntry
   MAX-ACCESS  not-accessible
   STATUS       current
   DESCRIPTION
    "Defines the contents of each line in the rlTuningParamsTable table."
   INDEX   { IMPLIED rlTuningParamsName }
   ::=  { rlTuningParamsTable 1 }

RlTuningParamsEntry ::= SEQUENCE {
        rlTuningParamsName                         DisplayString,
        rlTuningParamsCurrentValue                 INTEGER,
        rlTuningParamsAfterResetValue              INTEGER,
        rlTuningParamsDefaultValue                 INTEGER,
        rlTuningParamsMinimalValue                 INTEGER,
        rlTuningParamsMaximalValue                 INTEGER
    }

rlTuningParamsName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(1..80))
    MAX-ACCESS   read-only
    STATUS      current
    DESCRIPTION
        "Index to the rlTuningParamsTable.
          name of current value Mib for this entry. "
    ::= {  rlTuningParamsEntry 1  }

rlTuningParamsCurrentValue OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable current value used in this run by the system."
    ::= {  rlTuningParamsEntry 2  }

rlTuningParamsAfterResetValue OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable value that will be used in next run by the system.
          i.e. the value will be effective after next reboot"
    ::= {  rlTuningParamsEntry 3  }

rlTuningParamsDefaultValue OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable value that is used by the system as default."
    ::= {  rlTuningParamsEntry 4  }

rlTuningParamsMinimalValue OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable value indicate minimum value.
          this is the lower limit for editing the value after reset."
    ::= {  rlTuningParamsEntry 5  }

rlTuningParamsMaximalValue OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable value indicate maximum value.
          This is the upper limit for editing the value after reset."
    ::= {  rlTuningParamsEntry 6  }

rlHostParamTable    OBJECT-TYPE
   SYNTAX       SEQUENCE  OF RlHostParamEntry
   MAX-ACCESS  not-accessible
   STATUS       current
   DESCRIPTION
    "table to show tuning : limits curent and after reset values."
   ::=  { rsTunning 20}

rlHostParamEntry OBJECT-TYPE
   SYNTAX       RlHostParamEntry
   MAX-ACCESS  not-accessible
   STATUS       current
   DESCRIPTION
    "Defines the contents of each line in the rlHostParamTable table."
   INDEX   { IMPLIED rlHostParamName }
   ::=  { rlHostParamTable 1 }

RlHostParamEntry ::= SEQUENCE {
    rlHostParamName                  DisplayString,
    rlHostParamValue                 INTEGER,
    rlHostParamType                  INTEGER,
    rlHostParamUINT                  Unsigned32,
    rlHostParamOctetString           OCTET STRING,
    rlHostParamIpAddress             IpAddress,
    rlHostParamObjectId              OBJECT IDENTIFIER

}

rlHostParamName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(1..80))
    MAX-ACCESS   read-only
    STATUS      current
    DESCRIPTION
        "Index to the rlHostParamTable.
          name of current value Mib for this entry. "
    ::= {  rlHostParamEntry 1  }

rlHostParamValue OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable indicates the current INTEGER value used in this run by the system.
          Applicable only if rlHostParamType has 'int' value"
    ::= {  rlHostParamEntry 2  }

rlHostParamType OBJECT-TYPE
    SYNTAX      INTEGER { int(1),
                          uint(2),
                          octetString(3),
                          ipV4address(4),
                          ipV6address(5),
                          ipV6zAddress(6),
                          inetAddress(7),
                          macAddress(8),
                          objectIdentifier(9),
                          displayString(10),
                          truthValue(11),
                          portlist(12)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable indicates the type of this host parameter.
          int             - the value will be appear in the rlHostParamValue instance of this conceptual row.
          uint            - the value will be appear in the rlHostParamUINT instance of this conceptual row.
          octetString     - the value will be appear in the rlHostParamOctetString instance of this conceptual row.
          ipV4address     - the value will be appear in the rlHostParamIpAddress instance of this conceptual row.
          ipV6address     - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
                            to be interpreted as indicated in INET-ADDRESS-MIB.
          ipV6zAddress    - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
                            to be interpreted as indicated in INET-ADDRESS-MIB.
          inetAddress     - the inet address type will be appear in the rlHostParamUINT instance and
                            inet address itself will be appear in the rlHostParamOctetString instance of
                            this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB.
          macAddress      - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
                            to be interpreted as in SNMPv2-TC.
          objectIdentifier - the value the value will be appear in the rlHostParamObjectId instance of this conceptual
                            row.
          displayString   - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
                            to be interpreted as in SNMPv2-TC.
          truthValue      - the value will be appear in the rlHostParamUINT instance of this conceptual row,
                            to be interpreted as in SNMPv2-TC.
          portlist        - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
                            to be interpreted as in Q-BRIDGE-MIB.
          "
    ::= {  rlHostParamEntry 3  }

rlHostParamUINT OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable indicates the current UINT value used in this run by the system.
          Applicable only if rlHostParamType has 'uint', inetAddress or truthValue value"
    ::= {  rlHostParamEntry 4  }


 rlHostParamOctetString OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable indicates the current OCTET STRING value used in this run by the system.
          Applicable only if rlHostParamType has octetString, ipV6address, ipV6zAddress, inetAddress, macAddress or
          displayString value"
    ::= {  rlHostParamEntry 5  }


 rlHostParamIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable indicates the current IpAddress value used in this run by the system.
          Applicable only if rlHostParamType has ipV4address value"
    ::= {  rlHostParamEntry 6  }


 rlHostParamObjectId OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " This variable indicates the current OBJECT IDENTIFIER value used in this run by the system.
          Applicable only if rlHostParamType has objectIdentifier value"
    ::= {  rlHostParamEntry 7 }

-- OSPF Tuning

rlOspfTuning OBJECT IDENTIFIER ::= { rsTunning 21 }

rlMaxOspfInterfaces OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximum number of ospf interfaces."
    ::= { rlOspfTuning 1 }

rlMaxOspfInterfacesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximum number of ospf interfaces."
    ::= { rlOspfTuning 2 }

rlMaxOspfAreas OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximum number of ospf areas."
    ::= { rlOspfTuning 3 }

rlMaxOspfAreasAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximum number of ospf areas."
    ::= { rlOspfTuning 4 }

rlMaxOspfNeighbors OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximum number of ospf neighbors."
    ::= { rlOspfTuning 5 }

rlMaxOspfNeighborsAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximum number of ospf neighbors."
    ::= { rlOspfTuning 6 }

rlMaxOspfAbrPerArea OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximum number of ABR in ospf area."
    ::= { rlOspfTuning 7 }

rlMaxOspfAbrPerAreaAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximum number of ABR in ospf area."
    ::= { rlOspfTuning 8 }

rlMaxOspfNetsInAs OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximum number of networks in AS."
    ::= { rlOspfTuning 9 }

rlMaxOspfNetsInAsAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximum number of networks in AS."
    ::= { rlOspfTuning 10 }

rlVlanTuning OBJECT IDENTIFIER ::= { rsTunning 22 }

rlVlanDefaultVID OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The default vlan vid."
    ::= { rlVlanTuning 1 }

rlVlanDefaultVIDAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The default vlan vid after rest"
    ::= { rlVlanTuning 2 }

rlVlanUsageForbiddenListTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlVlanUsageForbiddenListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The list of vlan IDs that forbidden for internal usage."
    ::= { rlVlanTuning 3 }

rlVlanUsageForbiddenListEntry OBJECT-TYPE
    SYNTAX      RlVlanUsageForbiddenListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Statical created by local or network management VLAN list"
    INDEX   {rlVlanUsageForbiddenListIndex}
    ::= { rlVlanUsageForbiddenListTable 1 }

RlVlanUsageForbiddenListEntry ::=SEQUENCE {
    rlVlanUsageForbiddenListIndex            INTEGER,
    rlVlanUsageForbiddenList1to1024          VlanList1,
    rlVlanUsageForbiddenList1025to2048       VlanList2,
    rlVlanUsageForbiddenList2049to3072       VlanList3,
    rlVlanUsageForbiddenList3073to4094       VlanList4

}

rlVlanUsageForbiddenListIndex  OBJECT-TYPE
   SYNTAX      INTEGER
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION "An index is entrie's sequence."
   DEFVAL{0}
   ::= { rlVlanUsageForbiddenListEntry 1}

rlVlanUsageForbiddenList1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION "A list of staticaly created vlans from 1 to 1024."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListEntry 2}

rlVlanUsageForbiddenList1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION "A list of according to the type field created vlans from 1025 to 2048."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListEntry 3}

rlVlanUsageForbiddenList2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION "A list of according to the type field created vlans from 2049 to 3072."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListEntry 4}

rlVlanUsageForbiddenList3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION "A list of according to the type field created vlans from 3073 to 4094."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListEntry 5}


rlVlanUsageForbiddenListAfterResetTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlVlanUsageForbiddenListAfterResetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The list of vlan IDs that forbidden for internal usage.
                 The configuration applied after the system reset."
    ::= { rlVlanTuning 4 }

rlVlanUsageForbiddenListAfterResetEntry  OBJECT-TYPE
    SYNTAX      RlVlanUsageForbiddenListAfterResetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Staticly created by local or network management vlan list"
    INDEX   {rlVlanUsageForbiddenListAfterResetIndex}
    ::= { rlVlanUsageForbiddenListAfterResetTable 1 }

RlVlanUsageForbiddenListAfterResetEntry ::=SEQUENCE {
    rlVlanUsageForbiddenListAfterResetIndex            INTEGER,
    rlVlanUsageForbiddenListAfterReset1to1024          VlanList1,
    rlVlanUsageForbiddenListAfterReset1025to2048       VlanList2,
    rlVlanUsageForbiddenListAfterReset2049to3072       VlanList3,
    rlVlanUsageForbiddenListAfterReset3073to4094       VlanList4

}

rlVlanUsageForbiddenListAfterResetIndex  OBJECT-TYPE
   SYNTAX      INTEGER
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION "An index is entrie's sequence."
   DEFVAL{0}
   ::= { rlVlanUsageForbiddenListAfterResetEntry 1}

rlVlanUsageForbiddenListAfterReset1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION "A list of staticaly created vlans from 1 to 1024."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListAfterResetEntry 2}

rlVlanUsageForbiddenListAfterReset1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION "A list of according to the type field created vlans from 1025 to 2048."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListAfterResetEntry 3}

rlVlanUsageForbiddenListAfterReset2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION "A list of according to the type field created vlans from 2049 to 3072."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListAfterResetEntry 4}

rlVlanUsageForbiddenListAfterReset3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION "A list of according to the type field created vlans from 3073 to 4094."
   DEFVAL {'00'H}
   ::= { rlVlanUsageForbiddenListAfterResetEntry 5}


rlDependendFeaturesEnableTuning OBJECT IDENTIFIER ::= { rsTunning 23 }
rlDependendFeaturesEnabled OBJECT-TYPE
    SYNTAX      BITS {
        ipV4routingEnabled(0),
                              -- ipV4 router is active
        policyBasedVlanEnabled(1),
                              -- policy based VLAN feature
                              -- is enabled.
        qualityOfServiceEnables(2),
                              -- QOS feature is enabled.
        iscsiEnabled(3)
                              -- iSCSI feature is enabled.
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Current set of running features.
        These features combinations may limit by
          A. The same resource (such as ASIC module).
          B. limitation of product or logic for combination
          System limit is for up to 5 features
          First implemented with 3."
    ::= { rlDependendFeaturesEnableTuning 1 }

rlDependendFeaturesEnabledAfterReset OBJECT-TYPE
    SYNTAX      BITS {
        ipV4routingEnabled(0),
                              -- ipV4 router is active
        policyBasedVlanEnabled(1),
                              -- policy based VLAN feature
                              -- is enabled.
        qualityOfServiceEnables(2),
                              -- QOS feature is enabled.
        iscsiEnabled(3)
                              -- iSCSI feature is enabled.
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Next system load (after reset) set of running features.
        These features combinations limited by
          A. The same resource (such as ASIC module).
          B. Limitation of product or logic for combination (one feature override the other).
          C. Per product some or all features status may not be changed.
        System limit is for up to 5 features
        First implemented with 3."
    ::= { rlDependendFeaturesEnableTuning 2 }

-- IP DHCP snooping Tuning

rlIpDhcpSnoopingTuning OBJECT IDENTIFIER ::= { rsTunning 24 }

rlMaxIpDhcpSnoopingEntries OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current maximum number of DHCP snooping entries."
    ::= { rlIpDhcpSnoopingTuning 1 }

rlMaxIpDhcpSnoopingEntriesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The future (after reset) maximum number of DHCP snooping entries."
    ::= { rlIpDhcpSnoopingTuning 2 }

-- ISCSI snooping Tuning

rlIscsiSnoopTuning OBJECT IDENTIFIER ::= { rsTunning 25 }

rlIscsiSnoopMaxNumOfConnections OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Defines the presetly effective upper limit of iSCSI connections number
       the device guarantees to support"
    ::= { rlIscsiSnoopTuning 1 }

rlIscsiSnoopMaxNumOfConnectionsAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Defines the upper limit of iSCSI connections number
       the device will have to support following the looming System reset"
    ::= { rlIscsiSnoopTuning 2 }


-- DHCP server Tuning

rlDhcpServerTuning OBJECT IDENTIFIER ::= { rsTunning 26 }

rlDhcpSrvMaxAllocatedAddresses OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Defines the maximal number of allocated addresses by DHCP server"
    ::= { rlDhcpServerTuning 1 }

rlDhcpSrvMaxAllocatedAddressesAfterReset OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Defines the maximal number of allocated addresses by DHCP server activated after reset"
    ::= { rlDhcpServerTuning 2 }


-- bridge hash chain length tuning

rlBrgMacHashChainLen OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Current depth of the MAC address hashing Table"
    ::= { rsTunning 27 }

rlBrgMacHashChainLenAfterReset OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Defines the depth in step of 4, of the MAC address hashing Table after reset.
       The mac chain length is the scalar value multiplied by 4."
    ::= { rsTunning 28 }

-- bridge hash function tuning

rlBrgMacHashFunction OBJECT-TYPE
    SYNTAX      INTEGER {
        macSqnVlanSqn(0),
        macRndVlanSqn(1),
        macSqnVlanRnd(2),
        macRndVlanRnd(3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Current depth of the MAC address hashing Table"
    ::= { rsTunning 29 }




rlBrgMacHashFunctionAfterReset OBJECT-TYPE
    SYNTAX      INTEGER{
        macSqnVlanSqn(0),
        macRndVlanSqn(1),
        macSqnVlanRnd(2),
        macRndVlanRnd(3)
    }    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Defines hash function
      vlan random mac random
      vlan sequntial mac sequential
      vlan sequential mac random
      vlan random mac sequntial"
    ::= { rsTunning 30 }

-- next OBJECT IDENTIFIER ::= { rsTunning 31 }

END