path: root/MIBS/comware/HH3C-RPR-MIB

-- =================================================================
-- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: RPR private MIB. Description of entity extend properties for
-- IEEE-802DOT17-RPR-MIB
-- Reference: IEEE-802DOT17-RPR-MIB
-- Version: V1.2
-- History:
--  V1.0 created by qinxia
--  V1.1 modified by hexuefei,Add the RPR packet drop counters table.
--  V1.2 2015-04-30 Bug fixed by songhao
-- =================================================================
HH3C-RPR-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        hh3cCommon
            FROM HH3C-OID-MIB
        rprTopoImageEntry, rprTopoImageMacAddress, rprTopoImageInetAddress
            FROM IEEE-802DOT17-RPR-MIB
        InterfaceIndex
            FROM IF-MIB
        SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB
        RowStatus, TruthValue, MacAddress, TEXTUAL-CONVENTION
            FROM SNMPv2-TC
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
        Gauge32, Counter64, Integer32
            FROM SNMPv2-SMI
        InetAddress
            FROM INET-ADDRESS-MIB;

        hh3cRpr MODULE-IDENTITY
            LAST-UPDATED "200503161000Z"  -- March 16, 2005 at 10:18:41 GMT
            ORGANIZATION
                "New H3C Tech. Co., Ltd."
            CONTACT-INFO
                "Platform Team New H3C Tech. Co., Ltd.
                Hai-Dian District Beijing P.R. China
                http://www.h3c.com
                Zip:100085
                "
            DESCRIPTION
                "This MIB manages RPR(Resilient Packet Ring)interfaces by
                 providing an operational table which controls parameters
                 of each RPR interface and reports alarm conditions.

                 A RPR ring is composed of two fiber rings: Outer and Inner."
            REVISION "200503161000Z"      -- March 16, 2005 at 10:18:41 GMT
            DESCRIPTION
                "First published version."
            ::= { hh3cCommon 60 }

--
-- Textual conventions
--

    Hh3cRprRingletID ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "Indicates the path on which data flow is selected.
             The valid value is ringlet0 and ringlet1. They indicate
             two RPR fiber rings. Ringlet0 refers to outer ring and
             ringlet1 refers to inner ring."
        REFERENCE
            "IEEE 802.17 V3.3 Subclause 11.2.1.1 Span and
             ringlet parameterization."
        SYNTAX INTEGER
            {
             ringlet0(1),
             ringlet1(2)
        }

    Hh3cRprServiceClass ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "Indicates the service class of RPR.
             The valid value is ClassC, ClassB, ClassA1 and ClassA0."
        REFERENCE
                "IEEE 802.17 V3.3 Subclause 7.3 Service class."
        SYNTAX INTEGER
            {
             classC(1),
             classB(2),
             classA1(3),
             classA0(4)
        }

    hh3cRprObjects OBJECT IDENTIFIER ::= { hh3cRpr 1 }

-- RPR maximum define table

    hh3cRprMaxmumDefine OBJECT IDENTIFIER ::= { hh3cRprObjects 1 }

    hh3cRprMaxmumDefineTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprMaxmumDefineEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table contains the specs of RPR ring."
      ::= { hh3cRprMaxmumDefine 1 }

    hh3cRprMaxmumDefineEntry OBJECT-TYPE
        SYNTAX Hh3cRprMaxmumDefineEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The entry of RPR Maximum Table."
        INDEX { hh3cRprMaxMumIfIndex }
        ::= { hh3cRprMaxmumDefineTable 1 }

    Hh3cRprMaxmumDefineEntry ::=
        SEQUENCE {
            hh3cRprMaxMumIfIndex
                InterfaceIndex,
            hh3cRprMaxStationNumDefine
                INTEGER,
            hh3cRprMaxReservedRateDefine
                Gauge32
        }

    hh3cRprMaxMumIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of this RPR interface."
        ::= { hh3cRprMaxmumDefineEntry 1 }

    hh3cRprMaxStationNumDefine OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Max station number supported by RPR ring."
        ::= { hh3cRprMaxmumDefineEntry 2 }


    hh3cRprMaxReservedRateDefine OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Max reserved rate supported by each RPR ringlet.
             An estimate of the interface's current bandwidth in
             units of 1,000,000 bits per second.  If this object
             reports a value of 'n' then the speed of the interface
             is somewhere in the range of 'n-500,000' to
             'n+499,999'.  For interfaces which do not vary in
             bandwidth or for those where no accurate estimation
             can be made, this object should contain the nominal
             bandwidth.  For a sub-layer which has no concept of
             bandwidth, this object should be zero."
        ::= { hh3cRprMaxmumDefineEntry 3 }

    hh3cRprTopoImage OBJECT IDENTIFIER ::= { hh3cRprObjects 2 }

-- extension to the RPR topology table

    hh3cRprTopoImageXTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprTopoImageXEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table contains additional objects
             for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB."
        REFERENCE
            "rprTopoImageTable in IEEE-802DOT17-RPR-MIB."
        ::= { hh3cRprTopoImage 1 }

    hh3cRprTopoImageXEntry OBJECT-TYPE
        SYNTAX Hh3cRprTopoImageXEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Each entry contains information specific to a particular
             station on the ring. The table has at least one entry for
             the station itself, this entry indicates zero hops on each
             ringlet."
         AUGMENTS { rprTopoImageEntry }
         ::= { hh3cRprTopoImageXTable 1 }

    Hh3cRprTopoImageXEntry ::=
        SEQUENCE {
            hh3cRprTopoImageXWestEdgeStatus
                TruthValue,
            hh3cRprTopoImageXEastEdgeStatus
                TruthValue,
            hh3cRprTopoImageXStationName
                SnmpAdminString
        }

    hh3cRprTopoImageXWestEdgeStatus OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The current edge status of the west span.
             If an edge exists,the hh3cRprTopoImageXWestEdgeStatus is true.
             Otherwise, the hh3cRprTopoImageXWestEdgeStatus is false."
        REFERENCE
            "IEEE 802.17  V3.3 Subclause 11.1.1.5, Edges"
        ::= { hh3cRprTopoImageXEntry 3 }

    hh3cRprTopoImageXEastEdgeStatus OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The current edge status of the east span.
             If an edge exists, the hh3cRprTopoImageXEastEdgeStatus is true.
             Otherwise, the hh3cRprTopoImageXEastEdgeStatus is false."
        REFERENCE
             "IEEE 802.17  V3.3 Subclause 11.1.1.5, Edges"
        ::= { hh3cRprTopoImageXEntry 4 }

    hh3cRprTopoImageXStationName OBJECT-TYPE
        SYNTAX SnmpAdminString
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The operator assigned station name. The operator can assigned it
             by hh3cRprTopoImageXStationName."
        REFERENCE
            "IEEE 802.17 V3.3 Subclause 11.2.6, stationName."
        ::= { hh3cRprTopoImageXEntry 5 }

    hh3cRprSpanCounters OBJECT IDENTIFIER ::= { hh3cRprObjects 3 }

-- RPR source mac counters table

    hh3cRprSrcMacCountTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprSrcMacCountEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Source Mac Count Table contains the cumulative sum
             of frames and octects from the particular source station."
        ::= { hh3cRprSpanCounters 1 }

    hh3cRprSrcMacCountEntry OBJECT-TYPE
        SYNTAX Hh3cRprSrcMacCountEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Source Mac Count Table."
        INDEX { hh3cRprSrcMacCountIfIndex, hh3cRprSrcMacCountBySrcAddress }
        ::= { hh3cRprSrcMacCountTable 1 }

    Hh3cRprSrcMacCountEntry ::=
        SEQUENCE {
            hh3cRprSrcMacCountIfIndex
                InterfaceIndex,
            hh3cRprSrcMacCountBySrcAddress
                MacAddress,
          hh3cRprSrcMacCountReceivedFrames
                Counter64,
            hh3cRprSrcMacCountReceivedOctets
                Counter64
        }

    hh3cRprSrcMacCountIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of this RPR interface."
        REFERENCE
            "RFC 2863, ifIndex."
        ::= { hh3cRprSrcMacCountEntry 1 }

    hh3cRprSrcMacCountBySrcAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "MAC address of the source station where the frames come from."
        ::= { hh3cRprSrcMacCountEntry 2 }

    hh3cRprSrcMacCountReceivedFrames OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Frames received from a particular MAC address of source station."
        ::= { hh3cRprSrcMacCountEntry 3 }

    hh3cRprSrcMacCountReceivedOctets OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Octets received from a particular MAC address of source station."
        ::= { hh3cRprSrcMacCountEntry 4 }

-- RPR destination mac counters table

    hh3cRprDestMacCountTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprDestMacCountEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Destination MAC Count Table contains the cumulative sum
             of  frames and octects to the particular destination station."
        ::= { hh3cRprSpanCounters 2 }

    hh3cRprDestMacCountEntry OBJECT-TYPE
        SYNTAX Hh3cRprDestMacCountEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR MAC Destination Count Table."
        INDEX { hh3cRprDestMacCountIfIndex, hh3cRprDestMacCountByDestAddress }
        ::= { hh3cRprDestMacCountTable 1 }

    Hh3cRprDestMacCountEntry ::=
        SEQUENCE {
            hh3cRprDestMacCountIfIndex
                InterfaceIndex,
            hh3cRprDestMacCountByDestAddress
                MacAddress,
            hh3cRprDestMacCountReceivedFrames
                Counter64,
            hh3cRprDestMacCountReceivedOctets
                Counter64
        }

    hh3cRprDestMacCountIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprDestMacCountEntry 1 }

    hh3cRprDestMacCountByDestAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "MAC address of the destination station where the frames are sent
             to."
        ::= { hh3cRprDestMacCountEntry 2 }

    hh3cRprDestMacCountReceivedFrames OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Frames sent to a particular MAC address of destination station."
        ::= { hh3cRprDestMacCountEntry 3 }

    hh3cRprDestMacCountReceivedOctets OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Octets sent to a particular MAC address of destination station."
        ::= { hh3cRprDestMacCountEntry 4 }

-- RPR packet drop counters table

     hh3cRprPktDropCountTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprPktDropCountEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Packet Drop Count Table contains the cumulative sum
             of packets dropped for congestion."
        ::= { hh3cRprSpanCounters 3 }

     hh3cRprPktDropCountEntry OBJECT-TYPE
        SYNTAX Hh3cRprPktDropCountEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Packet Drop Count Table."
        INDEX { hh3cRprPktDropCntIfIndex, hh3cRprPktDropCntRingletID }
        ::= { hh3cRprPktDropCountTable 1 }

     Hh3cRprPktDropCountEntry ::=
        SEQUENCE {
                hh3cRprPktDropCntIfIndex
                    InterfaceIndex,
                hh3cRprPktDropCntRingletID
                    Hh3cRprRingletID,
                hh3cRprDownFlowClassAPktDrops
                    Counter64,
                hh3cRprUpFlowClassAPktDrops
                    Counter64,
                hh3cRprDownFlowClassBPktDrops
                    Counter64,
                hh3cRprUpFlowClassBPktDrops
                    Counter64,
                hh3cRprDownFlowClassCPktDrops
                    Counter64,
                hh3cRprUpFlowClassCPktDrops
                    Counter64
        }

     hh3cRprPktDropCntIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of this RPR interface."
        REFERENCE
             "RFC 2863, ifIndex."
        ::= { hh3cRprPktDropCountEntry 1 }

     hh3cRprPktDropCntRingletID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Ringlet of the station through which the packets transmit."
        ::= { hh3cRprPktDropCountEntry 2 }

     hh3cRprDownFlowClassAPktDrops OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total dropped number of Class A packets which transmit
             down from the host."
        ::= { hh3cRprPktDropCountEntry 3 }

     hh3cRprUpFlowClassAPktDrops OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total dropped number of Class A packets which transmit
             up to the host."
        ::= { hh3cRprPktDropCountEntry 4 }

     hh3cRprDownFlowClassBPktDrops OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total dropped number of Class B packets which transmit
             down from the host."
        ::= { hh3cRprPktDropCountEntry 5 }

     hh3cRprUpFlowClassBPktDrops OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
            "The total dropped number of Class B packets which transmit
             up to the host."
         ::= { hh3cRprPktDropCountEntry 6 }

     hh3cRprDownFlowClassCPktDrops OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
             "The total dropped number of Class C packets which transmit
              down from the host."
         ::= { hh3cRprPktDropCountEntry 7 }

     hh3cRprUpFlowClassCPktDrops OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
             "The total dropped number of Class C packets which transmit
              up to the host."
         ::= { hh3cRprPktDropCountEntry 8 }

    hh3cRprRS OBJECT IDENTIFIER ::= { hh3cRprObjects 4 }

-- The RPR static ring selection table

    hh3cRprStaticRSTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprStaticRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Static Ring Selection table contains the static
             ring selection information by the way of configuration."
        ::= { hh3cRprRS 1 }

    hh3cRprStaticRSEntry OBJECT-TYPE
        SYNTAX Hh3cRprStaticRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Static Ring Selection table."
        INDEX { hh3cRprStaticRSIfIndex, hh3cRprStaticRSMacAddress }
        ::= { hh3cRprStaticRSTable 1 }

    Hh3cRprStaticRSEntry ::=
        SEQUENCE {
            hh3cRprStaticRSIfIndex
                InterfaceIndex,
            hh3cRprStaticRSMacAddress
                MacAddress,
            hh3cRprStaticRSRingletID
                Hh3cRprRingletID,
            hh3cRprStaticRSTtl
                INTEGER,
            hh3cRprStaticRSValid
                TruthValue,
            hh3cRprStaticRSRowStatus
                RowStatus
        }

    hh3cRprStaticRSIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprStaticRSEntry 1 }

    hh3cRprStaticRSMacAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The MAC address of the station on the ring."
        ::= { hh3cRprStaticRSEntry 2 }

    hh3cRprStaticRSRingletID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The identifier of the ring which frames are sent
             from one station to another. Ringlet0 refers to outer ring,
             while ringlet1 does inner."
        ::= { hh3cRprStaticRSEntry 3 }

    hh3cRprStaticRSTtl  OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The hops from source station to destination station by the
             selected ringlet."
        ::= { hh3cRprStaticRSEntry 4 }

    hh3cRprStaticRSValid OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The flag identify whether the configed ringlet is valid.
             If it is true, the configed ringlet is valid, otherwise
             it's invalid."
        ::= { hh3cRprStaticRSEntry 5 }

    hh3cRprStaticRSRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The status of this table entry.
             The status includes createAndGo, active and destroy."
        ::= { hh3cRprStaticRSEntry 6 }

-- The RPR Ipv4 dynamic ring selection table

    hh3cRprIpv4DynamicRSTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprIpv4DynamicRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Ipv4Dynamic Ring Selection Table that contains the
             dynamic ring selection information by shortest path."
        ::= { hh3cRprRS 2 }

    hh3cRprIpv4DynamicRSEntry OBJECT-TYPE
        SYNTAX Hh3cRprIpv4DynamicRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Ipv4Dynamic Ring Selection Table."
        INDEX { hh3cRprIpv4DynamicRSIfIndex, hh3cRprIpv4DynamicRSMacAddress }
        ::= { hh3cRprIpv4DynamicRSTable 1 }

    Hh3cRprIpv4DynamicRSEntry ::=
        SEQUENCE {
            hh3cRprIpv4DynamicRSIfIndex
                InterfaceIndex,
            hh3cRprIpv4DynamicRSMacAddress
                MacAddress,
            hh3cRprIpv4DynamicRSRingletID
                Hh3cRprRingletID,
            hh3cRprIpv4DynamicRSTtl
                INTEGER
        }

    hh3cRprIpv4DynamicRSIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprIpv4DynamicRSEntry 1 }

    hh3cRprIpv4DynamicRSMacAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The Ipv4 MAC address of destination station on the ring."
        ::= { hh3cRprIpv4DynamicRSEntry 2 }

    hh3cRprIpv4DynamicRSRingletID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The identifier of the ring which frames are sent
             from the source station to the destination station."
        ::= { hh3cRprIpv4DynamicRSEntry 3 }

    hh3cRprIpv4DynamicRSTtl OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The hops from source station to destination station by the
             selected ringlet."
        ::= { hh3cRprIpv4DynamicRSEntry 4 }

-- The RPR Ipv6 dynamic ring selection table

    hh3cRprIpv6DynamicRSTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprIpv6DynamicRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6
             ring selection information by dynamic ring selection and static
             ring selection."
        ::= { hh3cRprRS 3 }

    hh3cRprIpv6DynamicRSEntry OBJECT-TYPE
        SYNTAX Hh3cRprIpv6DynamicRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Ipv6 Ring Selection Table."
        INDEX { hh3cRprIpv6DynamicRSIfIndex, hh3cRprIpv6DynamicRSMacAddress }
        ::= { hh3cRprIpv6DynamicRSTable 1 }

    Hh3cRprIpv6DynamicRSEntry ::=
        SEQUENCE {
            hh3cRprIpv6DynamicRSIfIndex
                InterfaceIndex,
            hh3cRprIpv6DynamicRSMacAddress
                MacAddress,
            hh3cRprIpv6DynamicRSRingletID
                Hh3cRprRingletID,
            hh3cRprIpv6DynamicRSTtl
                INTEGER
        }

    hh3cRprIpv6DynamicRSIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprIpv6DynamicRSEntry 1 }

    hh3cRprIpv6DynamicRSMacAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The Ipv6 MAC address of the destination station on the ring."
        ::= { hh3cRprIpv6DynamicRSEntry 2 }

    hh3cRprIpv6DynamicRSRingletID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The identifier of the ring which frames are sent
             from the source station to the destination station."
        ::= { hh3cRprIpv6DynamicRSEntry 3 }

    hh3cRprIpv6DynamicRSTtl OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The hops from source station to destination station by selected
             ringlet."
        ::= { hh3cRprIpv6DynamicRSEntry 4 }

-- The RPR Ipv4 overall ring selection table

    hh3cRprIpv4OverallRSTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprIpv4OverallRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Ipv4 Overall Ring Selection Table that contains the
             overall and active  ring selection infomation by dynamic ring
             selection and static ring selection."
        ::= { hh3cRprRS 4 }

    hh3cRprIpv4OverallRSEntry OBJECT-TYPE
        SYNTAX Hh3cRprIpv4OverallRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Overall Ring Selection Table."
        INDEX { hh3cRprIpv4OverallRSIfIndex, hh3cRprIpv4OverallRSMacAddress }
        ::= { hh3cRprIpv4OverallRSTable 1 }

    Hh3cRprIpv4OverallRSEntry ::=
        SEQUENCE {
            hh3cRprIpv4OverallRSIfIndex
                InterfaceIndex,
            hh3cRprIpv4OverallRSMacAddress
                MacAddress,
            hh3cRprIpv4OverallRSType
                INTEGER,
            hh3cRprIpv4OverallRSRingletID
                Hh3cRprRingletID,
            hh3cRprIpv4OverallRSTtl
                INTEGER
        }

    hh3cRprIpv4OverallRSIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprIpv4OverallRSEntry 1 }

    hh3cRprIpv4OverallRSMacAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The MAC address of the destination station on the ring."
        ::= { hh3cRprIpv4OverallRSEntry 2 }

    hh3cRprIpv4OverallRSType OBJECT-TYPE
        SYNTAX INTEGER {
            static(1),
            dynamic(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The ring selection item type indicates static or dynamic."
        ::= { hh3cRprIpv4OverallRSEntry 3 }

    hh3cRprIpv4OverallRSRingletID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The identifier of the ring which frames are sent
             from the source station to the destination station."
        ::= { hh3cRprIpv4OverallRSEntry 4 }

    hh3cRprIpv4OverallRSTtl OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The hops from source station to destination station  by
             selected ringlet."
        ::= { hh3cRprIpv4OverallRSEntry 5 }

-- The RPR VRRP ring selection table

    hh3cRprVrrpRSTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprVrrpRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR VRRP Ring Selection Table that contains the ring
             selection information when the vrrp group is configured."
        ::= { hh3cRprRS 5 }

    hh3cRprVrrpRSEntry OBJECT-TYPE
        SYNTAX Hh3cRprVrrpRSEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR VRRP Ring Selection Table."
        INDEX { hh3cRprVrrpRSIfIndex, hh3cRprVrrpRSVirtualMacAddress }
        ::= { hh3cRprVrrpRSTable 1 }

    Hh3cRprVrrpRSEntry ::=
        SEQUENCE {
            hh3cRprVrrpRSIfIndex
                InterfaceIndex,
            hh3cRprVrrpRSVirtualMacAddress
                MacAddress,
            hh3cRprVrrpRSMacAddress
                MacAddress,
            hh3cRprVrrpRSRingletID
                Hh3cRprRingletID,
            hh3cRprVrrpRSTtl
                INTEGER
        }

    hh3cRprVrrpRSIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprVrrpRSEntry 1 }

    hh3cRprVrrpRSVirtualMacAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The virtual MAC address of the staion in VRRP group."
        ::= { hh3cRprVrrpRSEntry 2 }


    hh3cRprVrrpRSMacAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The MAC address of the station that is  the master in VRRP group."
        ::= { hh3cRprVrrpRSEntry 3 }

    hh3cRprVrrpRSRingletID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The identifier of the ring which frames are sent
             from the source station to the destination station."
        ::= { hh3cRprVrrpRSEntry 4 }

    hh3cRprVrrpRSTtl OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The hops from source station to destination station by
             selected ringlet."
        ::= { hh3cRprVrrpRSEntry 5 }


-- The RPR default ring identifier config Table

    hh3cRprDefaultRingIDTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprDefaultRingIDEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Default RingID Table specify the default ringID."
        ::= { hh3cRprRS 6 }

    hh3cRprDefaultRingIDEntry OBJECT-TYPE
        SYNTAX Hh3cRprDefaultRingIDEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Default RingID Table."
        INDEX { hh3cRprDefaultRingIDIfIndex }
        ::= { hh3cRprDefaultRingIDTable 1 }

    Hh3cRprDefaultRingIDEntry ::=
        SEQUENCE {
            hh3cRprDefaultRingIDIfIndex
                InterfaceIndex,
            hh3cRprDefaultConfigRingletID
                Hh3cRprRingletID,
            hh3cRprDefaultActiveRingID
                Hh3cRprRingletID
        }

    hh3cRprDefaultRingIDIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprDefaultRingIDEntry 1 }

    hh3cRprDefaultConfigRingletID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The default identifier of the ring configured by user."
        ::= { hh3cRprDefaultRingIDEntry 2 }

    hh3cRprDefaultActiveRingID OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The identifier of the default ring which is active currently.
             The default ring configured by user may be inactive."
        ::= { hh3cRprDefaultRingIDEntry 3 }

-- The RPR defect report table

    hh3cRprDefect OBJECT IDENTIFIER ::= { hh3cRprObjects 5 }

    hh3cRprDefectReportTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprDefectReportEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Defect Report Table that contains the trap information on
             the ring."
        ::= { hh3cRprDefect 1 }

    hh3cRprDefectReportEntry OBJECT-TYPE
        SYNTAX Hh3cRprDefectReportEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Defect Report Table."
        INDEX { hh3cRprDefectIfIndex }
        ::= { hh3cRprDefectReportTable 1 }

    Hh3cRprDefectReportEntry ::=
        SEQUENCE {
            hh3cRprDefectIfIndex
                InterfaceIndex,
            hh3cRprDefectCurrentStatus
                BITS
        }

    hh3cRprDefectIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprDefectReportEntry 1 }

    hh3cRprDefectCurrentStatus OBJECT-TYPE
        SYNTAX BITS {
            topologyOpenRing(0),
            topoInstability(1),
            topoInconsistent(2),
            dulpMacAddress(3),
            dulpIPAddress(4),
            lrttDefect(5),
            protCfgDefect(6),
            jumboCfgDefect(7),
            excessReservedRateDefect(8),
            excessMaxStationNum(9),
            miscabling(10),
            backPressure(11)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicates the current status of RPR ring.
             This attribute is used to notify the management system that
             alarms generate or clear about some RPR ring."
        REFERENCE
            "IEEE 802.17 V3.3 Subclause 11.2.9."
        ::= { hh3cRprDefectReportEntry 2 }

-- The priority to RPR service class map table

    hh3cRprPriorityMap OBJECT IDENTIFIER ::= { hh3cRprObjects 6 }

    hh3cRprPriority2ClassMapTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprPriority2ClassMapEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The Table is for Class Of Service and RPR Service Class Mapping."
        ::= { hh3cRprPriorityMap 1 }

    hh3cRprPriority2ClassMapEntry OBJECT-TYPE
        SYNTAX Hh3cRprPriority2ClassMapEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the COS to Service Class Map Table."
        INDEX { hh3cRprPriority2ClassMapIfIndex,
                hh3cRprPriority2ClassMapType,
                hh3cRprPriorityValue
        }
        ::= { hh3cRprPriority2ClassMapTable 1 }

    Hh3cRprPriority2ClassMapEntry ::=
        SEQUENCE {
            hh3cRprPriority2ClassMapIfIndex
                InterfaceIndex,
            hh3cRprPriority2ClassMapType
                INTEGER,
            hh3cRprPriorityValue
                INTEGER,
            hh3cRprPriority2ClassMap
                Hh3cRprServiceClass
        }

    hh3cRprPriority2ClassMapIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprPriority2ClassMapEntry 1 }

    hh3cRprPriority2ClassMapType OBJECT-TYPE
        SYNTAX INTEGER {
            tag(1),
            mpls(2),
            ip(3)
        }
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The type of Priority,include tag, mpls, ip."
        ::= { hh3cRprPriority2ClassMapEntry 2 }

    hh3cRprPriorityValue OBJECT-TYPE
        SYNTAX INTEGER {
            pri0(1),
            pri1(2),
            pri2(3),
            pri3(4),
            pri4(5),
            pri5(6),
            pri6(7),
            pri7(8)
        }
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The priority of tag,mpls and ip, the value range is 0~7."
        ::= { hh3cRprPriority2ClassMapEntry 3 }

    hh3cRprPriority2ClassMap OBJECT-TYPE
        SYNTAX Hh3cRprServiceClass
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The RPR service class."
        REFERENCE
            "IEEE 802.17 V3.3 Subclause 7.3 Service class."
        ::= { hh3cRprPriority2ClassMapEntry 4 }

-- The RPR rate-limit config table

    hh3cRprRateLimitConfig OBJECT IDENTIFIER ::= { hh3cRprObjects 7 }

    hh3cRprRateLimitConfigTable  OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprRateLimitConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Rate Limit Configuration Table that contains the rate
             limit infomation of RPR serviec class."
        ::= { hh3cRprRateLimitConfig 1 }

    hh3cRprRateLimitConfigEntry  OBJECT-TYPE
        SYNTAX Hh3cRprRateLimitConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Rate Limit Configuration Table."
        INDEX { hh3cRprRateLimitConfigIfIndex,
                hh3cRprRateLimitConfigRingletId,
                hh3cRprRateLimitConfigServiceClass
        }
        ::= { hh3cRprRateLimitConfigTable 1 }

    Hh3cRprRateLimitConfigEntry  ::=
        SEQUENCE {
            hh3cRprRateLimitConfigIfIndex
                InterfaceIndex,
            hh3cRprRateLimitConfigRingletId
                Hh3cRprRingletID,
            hh3cRprRateLimitConfigServiceClass
                Hh3cRprServiceClass,
            hh3cRprRateLimitConfigValue
                Integer32
        }

    hh3cRprRateLimitConfigIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprRateLimitConfigEntry 1 }

    hh3cRprRateLimitConfigRingletId OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The identifier of the ring of RPR ringlet."
        ::= { hh3cRprRateLimitConfigEntry 2 }

    hh3cRprRateLimitConfigServiceClass OBJECT-TYPE
        SYNTAX Hh3cRprServiceClass
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR service class."
        REFERENCE
            "IEEE 802.17 V3.3 Subclause 7.3 Service class."
        ::= { hh3cRprRateLimitConfigEntry 3 }

    hh3cRprRateLimitConfigValue OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The value of rate-limit that configured for diffrent service class.
             The unit is permillage."
        ::= { hh3cRprRateLimitConfigEntry 4 }

-- The RPR mac address learning config table

    hh3cRprMacAddrLearn  OBJECT IDENTIFIER ::= { hh3cRprObjects 8 }

    hh3cRprMacLearnCfgTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprMacLearnCfgEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR MAC Address Table."
        ::= { hh3cRprMacAddrLearn 1 }

    hh3cRprMacLearnCfgEntry OBJECT-TYPE
        SYNTAX Hh3cRprMacLearnCfgEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The entry of RPR MAC Address Table."
        INDEX { hh3cRprMacLearnIfIndex, hh3cRprMacLearnRprMac }
        ::= { hh3cRprMacLearnCfgTable 1 }

    Hh3cRprMacLearnCfgEntry ::=
        SEQUENCE {
            hh3cRprMacLearnIfIndex
                InterfaceIndex,
            hh3cRprMacLearnRprMac
                MacAddress,
            hh3cRprMacLearnType
                INTEGER,
            hh3cRprMacLearnDestMac
                MacAddress,
            hh3cRprMacLearnVlanId
                Integer32,
            hh3cRprMacLearnRinglet
                Hh3cRprRingletID,
            hh3cRprMacLearnTtl
                INTEGER,
            hh3cRprMacLearnIsValid
                TruthValue,
            hh3cRprMacLearnRowStatus
                RowStatus
        }

    hh3cRprMacLearnIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprMacLearnCfgEntry 1 }

    hh3cRprMacLearnRprMac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The MAC address of the RPR station."
        ::= { hh3cRprMacLearnCfgEntry 2 }

    hh3cRprMacLearnType OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The type of MAC address item that the user built. The type
             includes static and dynamic."
        ::= { hh3cRprMacLearnCfgEntry 3 }

    hh3cRprMacLearnDestMac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The destination of MAC address."
        ::= { hh3cRprMacLearnCfgEntry 4 }

    hh3cRprMacLearnVlanId OBJECT-TYPE
        SYNTAX Integer32 (1..4094)
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The vlan ID that the MAC address learned from by RPR staion."
        ::= { hh3cRprMacLearnCfgEntry 5 }

    hh3cRprMacLearnRinglet OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The identifier of the ring which frames are sent
             from the source station to the destination station."
        ::= { hh3cRprMacLearnCfgEntry 6 }

    hh3cRprMacLearnTtl OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The hops from source station to destination station on the
             selected ringlet."
        ::= { hh3cRprMacLearnCfgEntry 7 }

    hh3cRprMacLearnIsValid OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The flag identify whether the configured mac address is valid.
             If it is true, the configured mac address is valid,
             otherwise it's invalid."
        ::= { hh3cRprMacLearnCfgEntry 8 }

    hh3cRprMacLearnRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The status of this table entry.
             The status includes createAndGo, active and destroy."
        ::= { hh3cRprMacLearnCfgEntry 9 }

-- The RPR table for trap

    hh3cRprTrapVar OBJECT IDENTIFIER ::= { hh3cRprObjects 9 }

    hh3cRprTrapVarTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cRprTrapVarEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The RPR Defect Report Table that contains varible that
             used to bind in trap."
        ::= { hh3cRprTrapVar 1 }

    hh3cRprTrapVarEntry OBJECT-TYPE
        SYNTAX Hh3cRprTrapVarEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the RPR Trap Var Table."
        INDEX { hh3cRprTrapIfIndex }
        ::= { hh3cRprTrapVarTable 1 }

    Hh3cRprTrapVarEntry ::=
        SEQUENCE {
            hh3cRprTrapIfIndex
                InterfaceIndex,
            hh3cRprTrapRinglet
                Hh3cRprRingletID,
            hh3cRprTrapTopoMacAddress
                MacAddress,
            hh3cRprTrapIpAddress
                InetAddress
        }

    hh3cRprTrapIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The ifIndex of RPR interface. It is only used for trap to bind."
        REFERENCE
            "RFC 2863, ifIndex"
        ::= { hh3cRprTrapVarEntry 1 }

     hh3cRprTrapRinglet OBJECT-TYPE
        SYNTAX Hh3cRprRingletID
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The span of RPR station. It is only used for trap to bind."
        ::= { hh3cRprTrapVarEntry 2 }

     hh3cRprTrapTopoMacAddress OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The MAC address of RPR station. It is only used for trap to bind."
        ::= { hh3cRprTrapVarEntry 3 }

    hh3cRprTrapIpAddress OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The IP address of RPR station. It is only used for trap to bind."
        ::= { hh3cRprTrapVarEntry 4 }


-- The RPR Traps

    hh3cRprTrap  OBJECT IDENTIFIER ::= { hh3cRprObjects 10 }

    hh3cRprTopologyOpenRing NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapRinglet }
        STATUS  current
        DESCRIPTION
            "The topology openRing trap indicates that the RPR ring is opened."
        REFERENCE
            "IEEE 802.17 Subclause 3.2.77 open ring."
        ::= { hh3cRprTrap 1 }

    hh3cRprTopologyCloseRing NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapRinglet }
        STATUS  current
        DESCRIPTION
            "The topology openRing trap indicates that the RPR ring is closed."
        REFERENCE
            "IEEE 802.17 Subclause 3.2.77 close ring."
        ::= { hh3cRprTrap 2 }

    hh3cRprTopologyInconsistent NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex }
        STATUS  current
        DESCRIPTION
            "The topology inconsistent trap indicates that the topology of
             RPR is inconsistent."
        REFERENCE
            "IEEE 802.17 Subclause 11.6.6.1 topology consistency."
        ::= { hh3cRprTrap 3 }

    hh3cRprTopologyInstability NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex }
        STATUS  current
        DESCRIPTION
            "The topology instability trap indicates that the topology of
             RPR is instability."
        ::= { hh3cRprTrap 4 }


    hh3cRprDuplicateMacAddress NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapTopoMacAddress}
        STATUS  current
        DESCRIPTION
            "The duplicate MAC address trap indicates that the mac address
             of the station on the ring is dulplicate. That means there is the
             same MAC address between two stations on the ring."
        ::= { hh3cRprTrap 5 }

    hh3cRprDulplicateIPAddress NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapIpAddress }
        STATUS  current
        DESCRIPTION
            "The dulplicate IP address trap indicates that the IP address of
             the station on the ring is dulplicate. That means there is the same
             IP address between two stations on the ring."
        ::= { hh3cRprTrap 6 }

    hh3cRprIncompleteLRTT NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex }
        STATUS  current
        DESCRIPTION
            "The incomplete LRTT trap indicates that LRTT is not completed."
        ::= { hh3cRprTrap 7 }

    hh3cRprProtecConfigInconsistent NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex }
        STATUS  current
        DESCRIPTION
            "The protection configuration inconsistent trap indicates that
             the configuration of protection mode on the ring is inconsistent.
             That is one station is configured steer mode while the other is
             configured wrap mode."
        ::= { hh3cRprTrap 8 }

    hh3cRprJumboConfigInconsistent NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex }
        STATUS  current
        DESCRIPTION
            "The jumbo configuration inconsistent trap indicates that the
             configuration of jumbo mode on the ring is inconsistent.
             That is one station supports jumbo frame while the other
             doesn't support jumbo frame."
        ::= { hh3cRprTrap 9 }

    hh3cRprExceedMaxReservRate NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapRinglet }
        STATUS  current
        DESCRIPTION
            "The exceeded max reserved rate trap indicates that the rate
             on the ringlet exceeded the max reserved rate. The operator can
             configure reserved rate for every station, but the sum of all
             stations' reserved rate of each RPR ringlet can't exceed maximum."
        ::= { hh3cRprTrap 10 }

    hh3cRprExceedMaxStationNum NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex }
        STATUS  current
        DESCRIPTION
            "The exceeded max station number trap indicates that the number
             of the stations on the ring exceeded the max station number."
        ::= { hh3cRprTrap 11 }

    hh3cRprMiscabling NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapRinglet }
        STATUS  current
        DESCRIPTION
            "The miscabling trap indicates that the miscabling event occurred."
        REFERENCE
            "IEEE 802.17 V3.0 Subclause 11.9.2.1 miscabling defect."
        ::= { hh3cRprTrap 12 }

    hh3cRprBackPressure NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapRinglet, hh3cRprPriority2ClassMap}
        STATUS  current
        DESCRIPTION
            "The back pressure trap indicates that the backpressure is generated
             on the ringlet. That is the data flow on the ringlet exceeded
             the range of rate-limit configured."
        ::= { hh3cRprTrap 13 }

    hh3cRprBackPressureOver NOTIFICATION-TYPE
        OBJECTS { hh3cRprTrapIfIndex, hh3cRprTrapRinglet, hh3cRprPriority2ClassMap }
        STATUS  current
        DESCRIPTION
            "The back pressure over trap indicates that the backpressure is
             disappeared on the ringlet."
        ::= { hh3cRprTrap 14 }

END