path: root/MIBS/dell/DellrPDU-MIB

--
-- 12/23/2009 - v1.0r Dell rPDU
--
-- **********************************************************************
-- **********************************************************************
-- dellrPDU-MIB { iso org(3) dod(6) internet(1) private(4) enterprises(1)
--                dell(674) }

DellrPDU-MIB DEFINITIONS ::= BEGIN

IMPORTS
   enterprises, IpAddress, Gauge, TimeTicks FROM RFC1155-SMI
   DisplayString                            FROM RFC1213-MIB
   OBJECT-TYPE                              FROM RFC-1212
   TRAP-TYPE                                FROM RFC-1215;

dell                             OBJECT IDENTIFIER ::=  { enterprises 674 }
pdu                              OBJECT IDENTIFIER ::=  { dell 10903 }
pdusub                           OBJECT IDENTIFIER ::=  { pdu 200 }

-- 1.3.6.1.4.1.674.10903.200

software                         OBJECT IDENTIFIER ::=  { pdusub 1 }
hardware                         OBJECT IDENTIFIER ::=  { pdusub 2 }
system                           OBJECT IDENTIFIER ::=  { pdusub 3 }

sysRPDUV1                        OBJECT IDENTIFIER ::=  { system 1 }

-- Common rPDU values

RpduEnableDisableType ::= INTEGER {
      disabled (1),
      enabled  (2)
    }

RpduNormalAlarmType ::= INTEGER {
      normal (1),
      alarm  (2)
    }

RpduCommNoneOKLostType ::= INTEGER {
      notInstalled (1),
      commsOK      (2),
      commsLost    (3)
    }

RpduLowNormalNearOverloadType ::= INTEGER {
      lowLoad      (1),
      normal       (2),
      nearOverload (3),
      overload     (4)
    }

RpduNotPBMinLowNrmlOHiMaxType ::= INTEGER {
      notPresent      (1),
      belowMin        (2),
      belowLow        (3),
      normal          (4),
      overHigh        (5),
      overMax         (6)
    }

RpduOtherToNonrecoverableType ::= INTEGER {
      other           (1),
      unknown         (2),
      ok              (3),
      non-critical    (4),
      critical        (5),
      non-recoverable (6)
    }

RpduOutletPhaseLayoutType ::= INTEGER {
      seqPhase1ToNeutral (1),
      seqPhase2ToNeutral (2),
      seqPhase3ToNeutral (3),
      seqPhase1ToPhase2  (4),
      seqPhase2ToPhase3  (5),
      seqPhase3ToPhase1  (6)
   }

productID                        OBJECT IDENTIFIER ::=  { hardware 100 }

productIDDisplayName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Name of this product for display purposes."
   ::= { productID  1 }

productIDDescription OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "A short description of this product."
   ::= { productID  2 }

productIDVendor OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The name of the product manufacturer."
   ::= { productID  3 }

productIDVersion OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The hardware version of this product."
   ::= { productID  4 }

productIDBuildNumber OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The software build number of the product populating the MIB."
   ::= { productID  5 }

productIDURL OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The URL of the Web-based application to manage this device, should
       the device provide one."
   ::= { productID  6 }

productIDDeviceNetworkName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Operating system-specific computer name if product SNMP service is
       hosted."
   ::= { productID  7 }

productStatus                    OBJECT IDENTIFIER ::=  { hardware 110 }

productStatusGlobalStatus OBJECT-TYPE
   SYNTAX RpduOtherToNonrecoverableType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The current status of the product. This is a summary of the status 
       for the entire product including any metered devices. The SNMP
       monitor performs a get to retrieve additional data when this status
       is abnormal. Valid values 1: Other 2: Unknown 3: OK 4: Non-critical
       5: Critical 6: Non-recoverable."
   ::= { productStatus  1 }

productStatusLastGlobalStatus OBJECT-TYPE
   SYNTAX RpduOtherToNonrecoverableType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The status before the current status which induced an initiative to
       issue a global status change trap."
   ::= { productStatus  2 }

productStatusTimeStamp OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The last time that the SNMP table geometries changed or attribute
       data was significantly updated. Management applications use this OID
       to trigger a refresh of data acquired from the MIB. This time should
       be a relative timestamp, for example, the value of MIB II SysUpTime
       when the values are updated."
   ::= { productStatus  3 }

productStatusRESERVED1 OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "RESERVED"
   ::= { productStatus  4 }

productStatusRESERVED2 OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "RESERVED"
   ::= { productStatus  5 }

productStatusRESERVED3 OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "RESERVED"
   ::= { productStatus  6 }


rPDU                             OBJECT IDENTIFIER ::=  { hardware 200 }

rPDUIdentD                       OBJECT IDENTIFIER ::=  { rPDU 100 }

-- rPDU Ident Table   

rPDUIdentTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of connected Rack PDUs."
   ::= { rPDUIdentD  1 }

rPDUIdentTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUIdentEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU identification data."
   ::= { rPDUIdentD  2 }

rPDUIdentEntry OBJECT-TYPE
   SYNTAX RPDUIdentEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Identification data from the Rack PDU being queried."
   INDEX { rPDUIdentIndex }
   ::= { rPDUIdentTable  1 }

RPDUIdentEntry ::=
   SEQUENCE {
      rPDUIdentIndex               INTEGER,
      rPDUIdentNameD               DisplayString,
      rPDUIdentLocation            DisplayString,
      rPDUIdentHardwareRevD        DisplayString,
      rPDUIdentFirmwareRevD        DisplayString,
      rPDUIdentDateOfManufactureD  DisplayString,
      rPDUIdentModelNumberD        DisplayString,
      rPDUIdentSerialNumberD       DisplayString
   }

rPDUIdentIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU identification table entry."
   ::= { rPDUIdentEntry  1 }

rPDUIdentNameD OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "A user-defined string identifying the Rack PDU."
   ::= { rPDUIdentEntry  2 }

rPDUIdentLocation OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "A user-defined string identifying the location of the Rack PDU."
   ::= { rPDUIdentEntry  3 }

rPDUIdentHardwareRevD OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The Rack PDU hardware version."
   ::= { rPDUIdentEntry  4 }

rPDUIdentFirmwareRevD OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The Rack PDU firmware version."
   ::= { rPDUIdentEntry  5 }

rPDUIdentDateOfManufactureD OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The date the Rack PDU was manufactured in mm/dd/yyyy format."
   ::= { rPDUIdentEntry  6 }

rPDUIdentModelNumberD OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The Rack PDU model number."
   ::= { rPDUIdentEntry  7 }

rPDUIdentSerialNumberD OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The Rack PDU serial number."
   ::= { rPDUIdentEntry  8 }

rPDUDevice                       OBJECT IDENTIFIER ::=  { rPDU 110 }

-- rPDU Device Data

rPDUDeviceTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of connected Rack PDUs."
   ::= { rPDUDevice  1 }

-- rPDU Device Status

rPDUDeviceStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUDeviceStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU status information."
   ::= { rPDUDevice  2 }

rPDUDeviceStatusEntry OBJECT-TYPE
   SYNTAX RPDUDeviceStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status information from the Rack PDU being queried."
   INDEX { rPDUDeviceStatusIndex }
   ::= { rPDUDeviceStatusTable  1 }

   RPDUDeviceStatusEntry ::=
    SEQUENCE {
      rPDUDeviceStatusIndex           INTEGER,
      rPDUDeviceStatusName            DisplayString,
      rPDUDeviceStatusPower           INTEGER,
      rPDUDeviceStatusEnergy          INTEGER,
      rPDUDeviceStatusCommandPending  INTEGER,
      rPDUDeviceStatusLoadState       INTEGER
   }

rPDUDeviceStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU status table entry."
   ::= { rPDUDeviceStatusEntry  1 }

rPDUDeviceStatusName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "A user-defined string identifying the Rack PDU."
   ::= { rPDUDeviceStatusEntry  2 }

rPDUDeviceStatusPower OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The power consumption of the Rack PDU load in 1/100 of KWatts."
   ::= { rPDUDeviceStatusEntry  3 }

rPDUDeviceStatusEnergy OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "A user resettable energy meter measuring Rack PDU load energy
       consumption in tenths of kilowatt-hours."
   ::= { rPDUDeviceStatusEntry  4 }

rPDUDeviceStatusCommandPending OBJECT-TYPE
   SYNTAX INTEGER {
      commandPending          (1),
      noCommandPending        (2),
      commandPendingUnknown   (3)
    }
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates whether the device is processing a pending command.
       If the commandPendingUnknown (3) value is returned, all devices
       receiving power from the Rack PDU should be shut down.
       The Rack PDU's power should then be cycled to clear this condition."
   ::= { rPDUDeviceStatusEntry  5 }

rPDUDeviceStatusLoadState OBJECT-TYPE
   SYNTAX RpduLowNormalNearOverloadType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the present load status of the Rack PDU Device being
       queried."
   ::= { rPDUDeviceStatusEntry 6 }

-- rPDU Device Config

rPDUDeviceConfigTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUDeviceConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU configuration data."
   ::= { rPDUDevice  3 }

rPDUDeviceConfigEntry OBJECT-TYPE
   SYNTAX RPDUDeviceConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Configuration data from the Rack PDU being queried."
   INDEX { rPDUDeviceConfigIndex }
   ::= { rPDUDeviceConfigTable  1 }

   RPDUDeviceConfigEntry ::=
    SEQUENCE {
      rPDUDeviceConfigIndex           INTEGER,
      rPDUDeviceConfigName            DisplayString,
      rPDUDeviceConfigLocation        DisplayString,
      rPDUDeviceConfigColdstartDelay  INTEGER,
      rPDUDeviceCfgLowLoadPwrThresh   INTEGER,
      rPDUDeviceCfgNerOvloadPwrThresh INTEGER,
      rPDUDeviceCfgOverloadPwrThresh  INTEGER,
      rPDUDeviceConfigPowerHeadroom   INTEGER,
      rPDUDeviceConfigPeakPower       INTEGER,
      rPDUDeviceCfgPeakPwrStartTime   DisplayString,
      rPDUDeviceConfigPeakPwrCapTime  DisplayString,
      rPDUDeviceCfgPeakPowerHeadroom  INTEGER,
      rPDUDeviceCfgEnergyStartTime    DisplayString
   }


rPDUDeviceConfigIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU table entry."
   ::= { rPDUDeviceConfigEntry  1 }

rPDUDeviceConfigName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "A user-defined string identifying the Rack PDU."
   ::= { rPDUDeviceConfigEntry  2 }

rPDUDeviceConfigLocation OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The Location of the Rack PDU."
   ::= { rPDUDeviceConfigEntry  3 }

rPDUDeviceConfigColdstartDelay OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The amount of delay, measured in seconds, between when power is
       provided to the Rack PDU and when the Rack PDU provides basic
       master power to the outlets."
   ::= { rPDUDeviceConfigEntry  4 }

rPDUDeviceCfgLowLoadPwrThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined low power draw alarm threshold, measured in tenths
       of kilowatts."
   ::= { rPDUDeviceConfigEntry  5 }

rPDUDeviceCfgNerOvloadPwrThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined near power overload threshold, measured in tenths
       of kilowatts."
   ::= { rPDUDeviceConfigEntry  6 }

rPDUDeviceCfgOverloadPwrThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined power overload threshold, measured in tenths of
       kilowatts."
   ::= { rPDUDeviceConfigEntry  7 }

rPDUDeviceConfigPowerHeadroom OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The amount of input power that is available to the connected
       devices in hundredths of kilowatt-hours."
   ::= { rPDUDeviceConfigEntry  8 }

rPDUDeviceConfigPeakPower OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The highest input power level recorded by the connected
       devices in hundredths of kilowatt-hours."
   ::= { rPDUDeviceConfigEntry  9 }

rPDUDeviceCfgPeakPwrStartTime OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The time, in hh:mm:ss, when the device started recording the highest
       input power level."
   ::= { rPDUDeviceConfigEntry  10 }

rPDUDeviceConfigPeakPwrCapTime OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The time, in hh:mm:ss, when the highest input power level was
       recorded by the device."
   ::= { rPDUDeviceConfigEntry  11 }

rPDUDeviceCfgPeakPowerHeadroom OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The highest level of input power that is available to the connected
       devices in hundredths of kilowatt-hours."
   ::= { rPDUDeviceConfigEntry  12 }

rPDUDeviceCfgEnergyStartTime OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The time, in hh:mm:ss, when the device started recording the input
       energy level."
   ::= { rPDUDeviceConfigEntry  13 }

-- rPDU Device Properties

rPDUDevicePropertiesTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUDevicePropertiesEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU properties."
   ::= { rPDUDevice  4 }

rPDUDevicePropertiesEntry OBJECT-TYPE
   SYNTAX RPDUDevicePropertiesEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Properties of the Rack PDU being queried."
   INDEX { rPDUDevicePropertiesIndex }
   ::= { rPDUDevicePropertiesTable  1 }
   
   RPDUDevicePropertiesEntry ::=
    SEQUENCE {
      rPDUDevicePropertiesIndex       INTEGER,
      rPDUDevicePropertiesName        DisplayString,
      rPDUDevicePropertiesNumOutlets  INTEGER,
      rPDUDevicePropertiesNumSwdOuts  INTEGER,
      rPDUDevicePropertiesNumMtrdOuts INTEGER,
      rPDUDevicePropertiesNumPhases   INTEGER,
      rPDUDevicePropertiesNumBreakers INTEGER,
      rPDUDevicePropertiesMaxCurntRtg INTEGER,
      rPDUDevicePropertiesOutlayout   INTEGER
   }

rPDUDevicePropertiesIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU properties table entry."
   ::= { rPDUDevicePropertiesEntry  1 }

rPDUDevicePropertiesName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "A user-defined string identifying the Rack PDU."
   ::= { rPDUDevicePropertiesEntry  2 }

rPDUDevicePropertiesNumOutlets OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of outlets on the Rack PDU."
   ::= { rPDUDevicePropertiesEntry  3 }

rPDUDevicePropertiesNumSwdOuts OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of switched outlets on the Rack PDU."
   ::= { rPDUDevicePropertiesEntry  4 }

rPDUDevicePropertiesNumMtrdOuts OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of metered outlets on the Rack PDU."
   ::= { rPDUDevicePropertiesEntry  5 }

rPDUDevicePropertiesNumPhases OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of phases present in the Rack PDU."
   ::= { rPDUDevicePropertiesEntry  6 }

rPDUDevicePropertiesNumBreakers OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of breakers present in the Rack PDU."
   ::= { rPDUDevicePropertiesEntry  7 }

rPDUDevicePropertiesMaxCurntRtg OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The maximum current rating, measured in Amps, for the Rack PDU."
   ::= { rPDUDevicePropertiesEntry  8 }

rPDUDevicePropertiesOutlayout OBJECT-TYPE
   SYNTAX INTEGER {
      phaseToNeutral        (1),
      phaseToPhase          (2),
      phaseToNeutralGrouped (3),
      phaseToPhaseGrouped   (4)
    }
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The phase wiring for the Rack PDU outlets. PhaseToNeutral and 
       PhaseToPhase: outlets wired consecutively; PhaseToNeutralGrouped
       and PhaseToPhaseGrouped: groups of outlets wired consecutively."
   ::= { rPDUDevicePropertiesEntry  9 }

-- rPDU Device Control

rPDUDeviceControlTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUDeviceControlEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU control data."
   ::= { rPDUDevice  5 }

rPDUDeviceControlEntry OBJECT-TYPE
   SYNTAX RPDUDeviceControlEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Control data from the Rack PDU being queried."
   INDEX { rPDUDeviceControlIndex }
   ::= { rPDUDeviceControlTable  1 }

   RPDUDeviceControlEntry ::=
    SEQUENCE {
      rPDUDeviceControlIndex    INTEGER,
      rPDUDeviceControlName     DisplayString,
      rPDUDeviceControlCommand  INTEGER
   }

rPDUDeviceControlIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU control table entry."
   ::= { rPDUDeviceControlEntry  1 }

rPDUDeviceControlName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "A user-defined string identifying the Rack PDU."
   ::= { rPDUDeviceControlEntry  2 }

rPDUDeviceControlCommand OBJECT-TYPE
   SYNTAX INTEGER {
      turnAllOnNow              (1),
      turnAllOnSequence         (2),
      turnAllOffNow             (3),
      rebootAllNow              (4),
      rebootAllSequence         (5),
      noCommand                 (6),
      turnAllOffSequence        (7)
    }
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Setting this OID to turnAllOnNow (1) will turn all outlets on
       immediately. Setting this OID to turnAllOnSequence (2) will turn
       all outlets on as defined by each outlet's sPDUOutletPowerOnTime
       OID value. Setting this OID to turnAllOff (3) will turn all outlets
       off immediately. Setting this OID to rebootAllNow (4) will reboot
       all outlets immediately. Setting this OID to rebootAllSequence (5)
       reboots all outlets, with power returned to the outlets in the
       sequence defined by each outlet's rPDUOutSwitchedCfgPowerOnTime 
       OID value. Setting this OID to rebootAllSequence (5) will cause a
       turnAllOffSequence to be performed. Once all outlets are off, the
       Rack PDU will then delay the rPDUOutSwtchedCfgRebootDuration
       OID time, and then perform a turnAllOnSequence. Setting this OID
       to turnAllOffSequence (7) will turn all outlets off as defined by
       each outlet's rPDUOutSwitchedCfgPowerOffTime OID value.
       Getting this OID will return the noCommand (6) value."
   ::= { rPDUDeviceControlEntry  3 }

rPDUPhase                        OBJECT IDENTIFIER ::=  { rPDU 120 }

-- rPDU Phase Data

rPDUPhaseTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of connected Rack PDU phases."
   ::= { rPDUPhase  1 }

-- rPDU Phase Status

rPDUPhaseStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUPhaseStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU phase status data."
   ::= { rPDUPhase  2 }

rPDUPhaseStatusEntry OBJECT-TYPE
   SYNTAX RPDUPhaseStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status data from the currently queried Rack PDU phase."
   INDEX { rPDUPhaseStatusIndex }
   ::= { rPDUPhaseStatusTable  1 }

   RPDUPhaseStatusEntry ::=
    SEQUENCE {
      rPDUPhaseStatusIndex     INTEGER,
      rPDUPhaseStatusNumber    INTEGER,
      rPDUPhaseStatusLoadState INTEGER,
      rPDUPhaseStatusCurrent   INTEGER,
      rPDUPhaseStatusVoltage   INTEGER,
      rPDUPhaseStatusPower     INTEGER
   }

rPDUPhaseStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU phase status table entry."
   ::= { rPDUPhaseStatusEntry  1 }

rPDUPhaseStatusNumber OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The numeric phase ID."
   ::= { rPDUPhaseStatusEntry  2 }

rPDUPhaseStatusLoadState OBJECT-TYPE
   SYNTAX RpduLowNormalNearOverloadType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the present load status of the Rack PDU phase being
       queried."
   ::= { rPDUPhaseStatusEntry  3 }

rPDUPhaseStatusCurrent OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the current draw, in tenths of Amps, of the load on
       the Rack PDU phase being queried."
   ::= { rPDUPhaseStatusEntry  4 }

rPDUPhaseStatusVoltage OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the Voltage, in Volts, of the Rack PDU
       phase being queried."
   ::= { rPDUPhaseStatusEntry  5 }

rPDUPhaseStatusPower OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the load power, in hundredths of kilowatts, consumed on
       the Rack PDU phase being queried."
   ::= { rPDUPhaseStatusEntry  6 }

-- rPDU Phase Config

rPDUPhaseConfigTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUPhaseConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU phase configuration data."
   ::= { rPDUPhase  3 }

rPDUPhaseConfigEntry OBJECT-TYPE
   SYNTAX RPDUPhaseConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Configuration data from the currently queried Rack PDU phase."
   INDEX { rPDUPhaseConfigIndex }
   ::= { rPDUPhaseConfigTable  1 }

   RPDUPhaseConfigEntry ::=
    SEQUENCE {
      rPDUPhaseConfigIndex            INTEGER,
      rPDUPhaseConfigNumber           INTEGER,
      rPDUPhaseCfgOverloadRestriction INTEGER,
      rPDUPhCfgLowLoadCurntThreshold  INTEGER,
      rPDUPhCfgNerOverloadCurntThresh INTEGER,
      rPDUPhCfgOverloadCurntThreshold INTEGER
   }

rPDUPhaseConfigIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU phase configuration table entry."
   ::= { rPDUPhaseConfigEntry  1 }

rPDUPhaseConfigNumber OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The numeric phase ID."
   ::= { rPDUPhaseConfigEntry  2 }

rPDUPhaseCfgOverloadRestriction OBJECT-TYPE
   SYNTAX INTEGER {
      alwaysAllowTurnON         (1),
      restrictOnNearOverload    (2),
      restrictOnOverload        (3)
    }
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "This OID controls the behavior of a Switched Rack PDU phase
       when an overload condition is possible and additional outlets
       are requested to be turned on. Setting this OID to
       alwaysAllowTurnON (1) will always allow the outlets on the
       corresponding phase to turn on. Setting this OID to 
       restrictOnNearOverload (2) will not allow outlets on the
       corresponding phase to turn on if the 
       rPDULoadConfigNearOverloadThreshold OID is exceeded. Setting
       this OID to restrictOnOverload (3) will not allow outlets on the
       corresponding phase to turn on if the
       rPDULoadConfigOverloadThreshold OID is exceeded."
   ::= { rPDUPhaseConfigEntry  3 }

rPDUPhCfgLowLoadCurntThreshold OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined threshold for low phase current load, in Amps."
   ::= { rPDUPhaseConfigEntry  4 }

rPDUPhCfgNerOverloadCurntThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined near phase overload warning threshold in Amps."
   ::= { rPDUPhaseConfigEntry  5 }

rPDUPhCfgOverloadCurntThreshold OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined phase overload current threshold in Amps."
   ::= { rPDUPhaseConfigEntry  6 }

rPDUOutlet                       OBJECT IDENTIFIER ::=  { rPDU 130 }

-- rPDU Outlet Data

rPDUOutletSwitched               OBJECT IDENTIFIER ::=  { rPDUOutlet 1 }

-- rPDU Switched Outlet Data

rPDUOutletSwitchedTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of switched outlets on connected Rack PDUs."
   ::= { rPDUOutletSwitched  1 }

-- rPDU Switched Outlet Status

rPDUOutletSwitchedStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUOutletSwitchedStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU switched outlet status information."
   ::= { rPDUOutletSwitched  2 }

rPDUOutletSwitchedStatusEntry OBJECT-TYPE
   SYNTAX RPDUOutletSwitchedStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status information for the currently-queried Rack PDU switched
       outlet."
   INDEX { rPDUOutletSwitchedStatusIndex }
   ::= { rPDUOutletSwitchedStatusTable  1 }

   RPDUOutletSwitchedStatusEntry ::=
    SEQUENCE {
      rPDUOutletSwitchedStatusIndex    INTEGER,
      rPDUOutletSwitchedStatusNumber   INTEGER,
      rPDUOutletSwitchedStatusName     DisplayString,
      rPDUOutletSwitchedStatusState    INTEGER,
      rPDUOutletSwitchedStatCmdPnding  INTEGER,
      rPDUOutletSwitchedStatPhLayout   RpduOutletPhaseLayoutType
   }

rPDUOutletSwitchedStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU switched outlet status information table
       entry."
   ::= { rPDUOutletSwitchedStatusEntry  1 }

rPDUOutletSwitchedStatusNumber OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The numeric switched outlet ID."
   ::= { rPDUOutletSwitchedStatusEntry  2 }

rPDUOutletSwitchedStatusName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined switched outlet ID string."
   ::= { rPDUOutletSwitchedStatusEntry  3 }

rPDUOutletSwitchedStatusState OBJECT-TYPE
   SYNTAX INTEGER {
      on      (1),
      off     (2),
      unknown (3)
    }
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the present status of the Rack PDU switched outlet
       being queried."
   ::= { rPDUOutletSwitchedStatusEntry  4 }

rPDUOutletSwitchedStatCmdPnding OBJECT-TYPE
   SYNTAX INTEGER {
      commandPending          (1),
      noCommandPending        (2),
      commandPendingUnknown   (3)
    }
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates whether the device is processing a command for this
       outlet. If the commandPendingUnknown (3) value is returned,
       all devices receiving power from the Rack PDU should be shut down.
       The Rack PDU's power should then be cycled to clear this condition."
   ::= { rPDUOutletSwitchedStatusEntry  5 }

rPDUOutletSwitchedStatPhLayout OBJECT-TYPE
   SYNTAX RpduOutletPhaseLayoutType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Phase description of the currently-queried Rack PDU switched outlet."
   ::= { rPDUOutletSwitchedStatusEntry  6 }

-- rPDU Switched Outlet Config

rPDUOutletSwitchedConfigTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUOutletSwitchedConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU switched outlet configuration data."
   ::= { rPDUOutletSwitched  3 }

rPDUOutletSwitchedConfigEntry OBJECT-TYPE
   SYNTAX RPDUOutletSwitchedConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Configuration data from the currently-queried Rack PDU switched
       outlet."
   INDEX { rPDUOutletSwitchedConfigIndex }
   ::= { rPDUOutletSwitchedConfigTable  1 }

   RPDUOutletSwitchedConfigEntry ::=
    SEQUENCE {
      rPDUOutletSwitchedConfigIndex   INTEGER,
      rPDUOutletSwitchedConfigNumber  INTEGER,
      rPDUOutletSwitchedConfigName    DisplayString,
      rPDUOutSwitchedCfgPowerOnTime   INTEGER,
      rPDUOutSwitchedCfgPowerOffTime  INTEGER,
      rPDUOutSwtchedCfgRebootDuration INTEGER
   }

rPDUOutletSwitchedConfigIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU switched outlet configuration table entry."
   ::= { rPDUOutletSwitchedConfigEntry  1 }

rPDUOutletSwitchedConfigNumber OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The numeric switched outlet ID."
   ::= { rPDUOutletSwitchedConfigEntry  2 }

rPDUOutletSwitchedConfigName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined switched outlet ID string."
   ::= { rPDUOutletSwitchedConfigEntry  3 }

rPDUOutSwitchedCfgPowerOnTime OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The amount of time, in seconds, between when power is provided to
       the Rack PDU and when this switched outlet starts providing power."
   ::= { rPDUOutletSwitchedConfigEntry  4 }

rPDUOutSwitchedCfgPowerOffTime OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The amount of time, in seconds, this outlet will delay turning off."
   ::= { rPDUOutletSwitchedConfigEntry  5 }

rPDUOutSwtchedCfgRebootDuration OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "After turning off power during a reboot sequence, the amount of
       time, in seconds, to wait before turning on power to this outlet
       again."
   ::= { rPDUOutletSwitchedConfigEntry  6 }

-- rPDU Switched Outlet Control

rPDUOutletSwitchedControlTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUOutletSwitchedControlEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU switched outlet control data."
   ::= { rPDUOutletSwitched  4 }

rPDUOutletSwitchedControlEntry OBJECT-TYPE
   SYNTAX RPDUOutletSwitchedControlEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Control data for the currently-queried Rack PDU switched outlet."
   INDEX { rPDUOutletSwitchedControlIndex }
   ::= { rPDUOutletSwitchedControlTable  1 }

   RPDUOutletSwitchedControlEntry ::=
    SEQUENCE {
      rPDUOutletSwitchedControlIndex  INTEGER,
      rPDUOutletSwitchedControlNumber INTEGER,
      rPDUOutletSwitchedControlName   DisplayString,
      rPDUOutletSwitchedControlCmd    INTEGER
   }

rPDUOutletSwitchedControlIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU switched outlet control data table entry."
   ::= { rPDUOutletSwitchedControlEntry  1 }

rPDUOutletSwitchedControlNumber OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The numeric switched outlet ID."
   ::= { rPDUOutletSwitchedControlEntry  2 }

rPDUOutletSwitchedControlName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined switched outlet ID string."
   ::= { rPDUOutletSwitchedControlEntry  3 }

rPDUOutletSwitchedControlCmd OBJECT-TYPE
   SYNTAX INTEGER {
      outletOn              (1),
      outletOff             (2),
      outletReboot          (3),
      outletUnknown         (4),
      outletOnWithDelay     (5),
      outletOffWithDelay    (6),
      outletRebootWithDelay (7)
    }
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Getting this variable will return the outlet state. If the outlet is
       on, the outletOn (1) value will be returned. If the outlet is off,
       the outletOff (2) value will be returned. If the state of the outlet
       cannot be determined, the outletUnknown (4) value will be returned.
       If the outletUnknown condition should occur, all devices receiving
       power from the PDU should be shut down. The PDU's power should then
       be cycled to clear this condition. Setting this variable to
       outletOn (1) will turn the outlet on. Setting this variable to 
       outletOff (2) will turn the outlet off. Setting this variable to 
       outletReboot (3) will reboot the outlet. Setting this variable to
       outletOnWithDelay (5) will turn the outlet on after the 
       rPDUOutSwitchedCfgPowerOnTime OID has elapsed. Setting this
       variable to outletOffWithDelay (6) will turn the outlet off after
       the rPDUOutSwitchedCfgPowerOffTime OID has elapsed. Setting
       this variable to outletRebootWithDelay (7) will turn the outlet off
       after the rPDUOutSwitchedCfgPowerOffTime OID has elapsed,
       wait the rPDUOutSwtchedCfgRebootDuration OID time, then turn
       the outlet back on."
   ::= { rPDUOutletSwitchedControlEntry  4 }

rPDUOutletMetered                OBJECT IDENTIFIER ::=  { rPDUOutlet 2 }

-- rPDU Metered Outlet Data

rPDUOutletMeteredTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of metered outlets on connected Rack PDUs."
   ::= { rPDUOutletMetered  1 }

-- rPDU Metered Outlet Status

rPDUOutletMeteredStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUOutletMeteredStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU metered outlet status data."
   ::= { rPDUOutletMetered  2 }

rPDUOutletMeteredStatusEntry OBJECT-TYPE
   SYNTAX RPDUOutletMeteredStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status data from the currently-queried Rack PDU metered outlet."
   INDEX { rPDUOutletMeteredStatusIndex }
   ::= { rPDUOutletMeteredStatusTable  1 }

   RPDUOutletMeteredStatusEntry ::=
    SEQUENCE {
      rPDUOutletMeteredStatusIndex   INTEGER,
      rPDUOutletMeteredStatusNumber  INTEGER,
      rPDUOutletMeteredStatusName    DisplayString,
      rPDUOutletMeteredStatusLayout  INTEGER,
      rPDUOutMeteredStatPowerRating  INTEGER,
      rPDUOutletMeteredStatusCurrent INTEGER,
      rPDUOutletMeteredStatusEnergy  INTEGER,
      rPDUOutletMeteredStatusPower   INTEGER,
      rPDUOutletMeteredStatPeakPower INTEGER,
      rPDUOutMeteredStatPeakPwrTime  DisplayString,
      rPDUOutMeteredStatusLoadState  INTEGER
   }

rPDUOutletMeteredStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU metered status table entry."
   ::= { rPDUOutletMeteredStatusEntry  1 }

rPDUOutletMeteredStatusNumber OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The numeric metered outlet ID."
   ::= { rPDUOutletMeteredStatusEntry  2 }

rPDUOutletMeteredStatusName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined metered outlet ID string."
   ::= { rPDUOutletMeteredStatusEntry  3 }

rPDUOutletMeteredStatusLayout OBJECT-TYPE
   SYNTAX RpduOutletPhaseLayoutType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Phase description of currently queried Rack PDU metered outlet."
   ::= { rPDUOutletMeteredStatusEntry  4 }

rPDUOutMeteredStatPowerRating OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The power rating for the currently queried Rack PDU metered outlet."
   ::= { rPDUOutletMeteredStatusEntry  5 }

rPDUOutletMeteredStatusCurrent OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the current draw, in Amps, of the load on the Rack PDU
       outlet being queried."
   ::= { rPDUOutletMeteredStatusEntry  6 }

rPDUOutletMeteredStatusEnergy OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "A user resettable energy meter measuring Rack PDU load energy
       consumption in kilowatt-hours."
   ::= { rPDUOutletMeteredStatusEntry  7 }

rPDUOutletMeteredStatusPower OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the power draw of the load on the Rack PDU outlet being
       queried."
   ::= { rPDUOutletMeteredStatusEntry  8 }

rPDUOutletMeteredStatPeakPower OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The highest power level recorded by the currently queried Rack PDU
       metered outlet, in kilowatts."
   ::= { rPDUOutletMeteredStatusEntry  9 }

rPDUOutMeteredStatPeakPwrTime OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the date and time that peak power consumption occured"
   ::= { rPDUOutletMeteredStatusEntry  10 }

rPDUOutMeteredStatusLoadState OBJECT-TYPE
   SYNTAX RpduLowNormalNearOverloadType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the present load status of the Rack PDU Outlet being
       queried."
   ::= { rPDUOutletMeteredStatusEntry  11 }

-- rPDU Metered Outlet Config

rPDUOutletMeteredConfigTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUOutletMeteredConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of Rack PDU metered outlet configuration data."
   ::= { rPDUOutletMetered  4 }

rPDUOutletMeteredConfigEntry OBJECT-TYPE
   SYNTAX RPDUOutletMeteredConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Configuration data from the currently queried Rack PDU metered
       outlet."
   INDEX { rPDUOutletMeteredConfigIndex }
   ::= { rPDUOutletMeteredConfigTable  1 }

   RPDUOutletMeteredConfigEntry ::=
    SEQUENCE {
      rPDUOutletMeteredConfigIndex    INTEGER,
      rPDUOutletMeteredConfigNumber   INTEGER,
      rPDUOutletMeteredConfigName     DisplayString,
      rPDUOutMtredCfgLowLdCurntThresh INTEGER,
      rPDUOutMtrdCfgNrOvdCurntThresh  INTEGER,
      rPDUOutMtredCfgOvrldCurntThresh INTEGER
   }

rPDUOutletMeteredConfigIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the Rack PDU metered outlet configuration table entry."
   ::= { rPDUOutletMeteredConfigEntry  1 }

rPDUOutletMeteredConfigNumber OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The numeric switched outlet ID."
   ::= { rPDUOutletMeteredConfigEntry  2 }

rPDUOutletMeteredConfigName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined metered outlet ID string."
   ::= { rPDUOutletMeteredConfigEntry  3 }

rPDUOutMtredCfgLowLdCurntThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined low load outlet current threshold, in Amps."
   ::= { rPDUOutletMeteredConfigEntry  4 }

rPDUOutMtrdCfgNrOvdCurntThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined near outlet overload warning threshold, in Amps."
   ::= { rPDUOutletMeteredConfigEntry  5 }

rPDUOutMtredCfgOvrldCurntThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined outlet overload current threshold, in Amps."
   ::= { rPDUOutletMeteredConfigEntry  6 }

rPDUOutMeteredEnergyStartTime OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The time, in hh:mm:ss, when the currently queried Rack PDU metered
       outlet started recording the input energy level."
   ::= { rPDUOutletMetered 5 }

rPDUOutMeteredPeakPwrStartTime OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The time, in hh:mm:ss, when the currently queried Rack PDU metered
       outlet started recording the highest level of input power that is
       available to the connected device."
   ::= { rPDUOutletMetered 6 }

rPDUPowerSupply                  OBJECT IDENTIFIER ::=  { rPDU 140 }

-- the rPDU Power Supply group

rPDUPowerSupplyAlarmD OBJECT-TYPE
   SYNTAX INTEGER {
      allAvailablePowerSuppliesOK (1),
      powerSupplyFailed           (2)
    }
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Getting this OID will return the status of the power supply alarm."
   ::= { rPDUPowerSupply  1 }

rPDUPowerSupplyVoltage OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The voltage provided by the power supply in tenths of volts."
   ::= { rPDUPowerSupply  2 }

rPDUSensor                       OBJECT IDENTIFIER ::=  { rPDU 150 }

-- rPDU Sensor Data

rPDUSensorStatus                 OBJECT IDENTIFIER ::=  { rPDUSensor 1 }

-- rPDU Sensor Status Data

rPDUSensorStatusTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of connected temperature sensors."
   ::= { rPDUSensorStatus  1 }

-- rPDU Temperature Sensor Status

rPDUSensorStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUSensorStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of temperature sensor status data."
   ::= { rPDUSensorStatus  2 }

rPDUSensorStatusEntry OBJECT-TYPE
   SYNTAX RPDUSensorStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status information from the temperature sensor being queried."
   INDEX { rPDUSensorStatusIndex }
   ::= { rPDUSensorStatusTable  1 }

   RPDUSensorStatusEntry ::=
    SEQUENCE {
      rPDUSensorStatusIndex INTEGER,
      rPDUSensorStatusName  DisplayString,
      rPDUSensorStatusType  INTEGER
   }

rPDUSensorStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the status data table entry."
   ::= { rPDUSensorStatusEntry  1 }

rPDUSensorStatusName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined sensor ID string."
   ::= { rPDUSensorStatusEntry  2 }

rPDUSensorStatusType OBJECT-TYPE
   SYNTAX INTEGER {
      none                (1),
      temperature         (2),
      temperatureHumidity (3)
    }
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The type of the sensor."
   ::= { rPDUSensorStatusEntry  3 }

rPDUSensorTemp                   OBJECT IDENTIFIER ::=  { rPDUSensor 2 }

-- rPDU Temperature Sensor Data

rPDUSensorTempTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of connected temperature sensors."
   ::= { rPDUSensorTemp  1 }

-- rPDU Temperature Sensor Status

rPDUSensorTempStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUSensorTempStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of temperature sensor status data."
   ::= { rPDUSensorTemp  2 }

rPDUSensorTempStatusEntry OBJECT-TYPE
   SYNTAX RPDUSensorTempStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status information from the temperature sensor being queried."
   INDEX { rPDUSensorTempStatusIndex }
   ::= { rPDUSensorTempStatusTable  1 }

   RPDUSensorTempStatusEntry ::=
    SEQUENCE {
      rPDUSensorTempStatusIndex       INTEGER,
      rPDUSensorTempStatusName        DisplayString,
      rPDUSensorTempStatusCommStatus  INTEGER,
      rPDUSensorTempStatusTempF       INTEGER,
      rPDUSensorTempStatusTempC       INTEGER,
      rPDUSensorTempStatusAlarmStatus INTEGER
   }

rPDUSensorTempStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the temperature status data table entry."
   ::= { rPDUSensorTempStatusEntry  1 }

rPDUSensorTempStatusName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined temperature-humidity sensor ID string."
   ::= { rPDUSensorTempStatusEntry  2 }

rPDUSensorTempStatusCommStatus OBJECT-TYPE
   SYNTAX RpduCommNoneOKLostType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The communications status of the sensor."
   ::= { rPDUSensorTempStatusEntry  3 }

rPDUSensorTempStatusTempF OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The sensor temperature reading in tenths of degrees Fahrenheit."
   ::= { rPDUSensorTempStatusEntry  4 }

rPDUSensorTempStatusTempC OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The sensor temperature reading in tenths of degrees Celsius."
   ::= { rPDUSensorTempStatusEntry  5 }

rPDUSensorTempStatusAlarmStatus OBJECT-TYPE
   SYNTAX RpduNotPBMinLowNrmlOHiMaxType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The alarm status of the sensor."
   ::= { rPDUSensorTempStatusEntry  6 }

-- rPDU Temperature Sensor Config

rPDUSensorTempConfigTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUSensorTempConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of temperature-humidity sensor configuration data."
   ::= { rPDUSensorTemp  3 }

rPDUSensorTempConfigEntry OBJECT-TYPE
   SYNTAX RPDUSensorTempConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Configuration data from the temperature-humidity sensor being
       queried."
   INDEX { rPDUSensorTempConfigIndex }
   ::= { rPDUSensorTempConfigTable  1 }

   RPDUSensorTempConfigEntry ::=
    SEQUENCE {
      rPDUSensorTempConfigIndex       INTEGER,
      rPDUSensorTempConfigName        DisplayString,
      rPDUSensorTempCfgTempMaxThreshF INTEGER,
      rPDUSnsorTempCfgTempHighThreshF INTEGER,
      rPDUSnsorTempCfgTempHysteresisF INTEGER,
      rPDUSensorTempCfgTempMaxThreshC INTEGER,
      rPDUSnsorTempCfgTempHighThreshC INTEGER,
      rPDUSnsorTempCfgTempHysteresisC INTEGER,
      rPDUSnsorTempCfgAlarmGeneration INTEGER
   }

rPDUSensorTempConfigIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the temperature-humidity sensor configuration data
       table entry."
   ::= { rPDUSensorTempConfigEntry  1 }

rPDUSensorTempConfigName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined temperature-humidity sensor ID string."
   ::= { rPDUSensorTempConfigEntry  2 }

rPDUSensorTempCfgTempMaxThreshF OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor maximum temperature alarm threshold in Fahrenheit."
   ::= { rPDUSensorTempConfigEntry  3 }

rPDUSnsorTempCfgTempHighThreshF OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor high temperature warning alarm threshold in Fahrenheit."
   ::= { rPDUSensorTempConfigEntry  4 }

rPDUSnsorTempCfgTempHysteresisF OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor temperature hysteresis setting in Fahrenheit."
   ::= { rPDUSensorTempConfigEntry  5 }

rPDUSensorTempCfgTempMaxThreshC OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor maximum temperature alarm threshold in Celsius."
   ::= { rPDUSensorTempConfigEntry  6 }

rPDUSnsorTempCfgTempHighThreshC OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor high temperature warning alarm threshold in Celsius."
   ::= { rPDUSensorTempConfigEntry  7 }

rPDUSnsorTempCfgTempHysteresisC OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor temperature hysteresis setting in Celsius."
   ::= { rPDUSensorTempConfigEntry  8 }

rPDUSnsorTempCfgAlarmGeneration OBJECT-TYPE
   SYNTAX RpduEnableDisableType
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Indicates whether the Temp Alarm Generation is enabled."
   ::= { rPDUSensorTempConfigEntry  9 }

rPDUSensorHumidity               OBJECT IDENTIFIER ::=  { rPDUSensor 3 }

-- rPDU Humidity Sensor 

rPDUSensorHumidityTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of connected temperature-humidity sensors."
   ::= { rPDUSensorHumidity  1 }

-- rPDU Humidity Sensor Status

rPDUSensorHumidityStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUSensorHumidityStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of temperature-humidity sensor status data."
   ::= { rPDUSensorHumidity  2 }

rPDUSensorHumidityStatusEntry OBJECT-TYPE
   SYNTAX RPDUSensorHumidityStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status information from the temperature-humidity sensor being
       queried."
   INDEX { rPDUSensorHumidityStatusIndex }
   ::= { rPDUSensorHumidityStatusTable  1 }

   RPDUSensorHumidityStatusEntry ::=
    SEQUENCE {
      rPDUSensorHumidityStatusIndex   INTEGER,
      rPDUSensorHumidityStatusName    DisplayString,
      rPDUSnsorHumidityStatCommStatus INTEGER,
      rPDUSnsorHumStatRelativeHumdity INTEGER,
      rPDUSnsorHumStatusAlarmStatus   INTEGER
   }

rPDUSensorHumidityStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the temperature-humidity status data table entry."
   ::= { rPDUSensorHumidityStatusEntry  1 }

rPDUSensorHumidityStatusName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined temperature-humidity sensor ID string."
   ::= { rPDUSensorHumidityStatusEntry  2 }

rPDUSnsorHumidityStatCommStatus OBJECT-TYPE
   SYNTAX RpduCommNoneOKLostType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The communications status of the sensor."
   ::= { rPDUSensorHumidityStatusEntry  3 }

rPDUSnsorHumStatRelativeHumdity OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The sensor humidity reading in percent relative humidity."
   ::= { rPDUSensorHumidityStatusEntry  4 }

rPDUSnsorHumStatusAlarmStatus OBJECT-TYPE
   SYNTAX RpduNotPBMinLowNrmlOHiMaxType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The alarm status of the sensor."
   ::= { rPDUSensorHumidityStatusEntry  5 }

-- rPDU Humidity Sensor Config

rPDUSensorHumidityConfigTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUSensorHumidityConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of temperature-humidity sensor configuration data."
   ::= { rPDUSensorHumidity  3 }

rPDUSensorHumidityConfigEntry OBJECT-TYPE
   SYNTAX RPDUSensorHumidityConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Configuration data from the temperature-humidity sensor being
       queried."
   INDEX { rPDUSensorHumidityConfigIndex }
   ::= { rPDUSensorHumidityConfigTable  1 }

   RPDUSensorHumidityConfigEntry ::=
    SEQUENCE {
      rPDUSensorHumidityConfigIndex   INTEGER,
      rPDUSensorHumidityConfigName    DisplayString,
      rPDUSnsorHumCfgHumdityLowThresh INTEGER,
      rPDUSnsorHumCfgHumdityMinThresh INTEGER,
      rPDUSnsorHumCfgHumdtyHysteresis INTEGER,
      rPDUSnsorHumCfgAlarmGeneration  INTEGER
   }

rPDUSensorHumidityConfigIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the temperature-humidity sensor configuration data
       table entry."
   ::= { rPDUSensorHumidityConfigEntry  1 }

rPDUSensorHumidityConfigName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined temperature-humidity sensor ID string."
   ::= { rPDUSensorHumidityConfigEntry  2 }

rPDUSnsorHumCfgHumdityLowThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor low humidity warning alarm threshold in percent relative
       humidity."
   ::= { rPDUSensorHumidityConfigEntry  3 }

rPDUSnsorHumCfgHumdityMinThresh OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor minimum humidity alarm threshold in percent relative
       humidity."
   ::= { rPDUSensorHumidityConfigEntry  4 }

rPDUSnsorHumCfgHumdtyHysteresis OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The sensor humidity hysteresis setting in percent relative humidity."
   ::= { rPDUSensorHumidityConfigEntry  5 }

rPDUSnsorHumCfgAlarmGeneration OBJECT-TYPE
   SYNTAX RpduEnableDisableType
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Indicates whether the Humidity Alarm Generation is enabled."
   ::= { rPDUSensorHumidityConfigEntry  6 }

rPDUSensorDiscrete               OBJECT IDENTIFIER ::=  { rPDUSensor 4 }

-- rPDU Discrete Sensor Data

rPDUSensorDiscreteTableSize OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The number of connected discrete sensors."
   ::= { rPDUSensorDiscrete  1 }

-- rPDU Discrete Sensor Status

rPDUSensorDiscreteStatusTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUSensorDiscreteStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of discrete sensor status data."
   ::= { rPDUSensorDiscrete  2 }

rPDUSensorDiscreteStatusEntry OBJECT-TYPE
   SYNTAX RPDUSensorDiscreteStatusEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Status information from the discrete sensor being queried."
   INDEX { rPDUSensorDiscreteStatusIndex }
   ::= { rPDUSensorDiscreteStatusTable  1 }

   RPDUSensorDiscreteStatusEntry ::=
    SEQUENCE {
      rPDUSensorDiscreteStatusIndex   INTEGER,
      rPDUSensorDiscreteStatusName    DisplayString,
      rPDUSnsorDiscreteStatCurntState INTEGER,
      rPDUSnsorDiscreteStatAlarmState INTEGER
   }

rPDUSensorDiscreteStatusIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the discrete sensor status data table entry."
   ::= { rPDUSensorDiscreteStatusEntry  1 }

rPDUSensorDiscreteStatusName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined discrete sensor ID string."
   ::= { rPDUSensorDiscreteStatusEntry  2 }

rPDUSnsorDiscreteStatCurntState OBJECT-TYPE
   SYNTAX INTEGER {
      open     (1),
      closed   (2),
      unknown  (3)
    }
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The current state of the discrete sensor, open, closed, or unknown."
   ::= { rPDUSensorDiscreteStatusEntry  3 }

rPDUSnsorDiscreteStatAlarmState OBJECT-TYPE
   SYNTAX RpduNormalAlarmType
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "Indicates the alarm status of the discrete sensor input."
   ::= { rPDUSensorDiscreteStatusEntry  4 }

-- rPDU Discrete Sensor Config

rPDUSensorDiscreteConfigTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RPDUSensorDiscreteConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "A table of discrete sensor configuration data."
   ::= { rPDUSensorDiscrete  3 }

rPDUSensorDiscreteConfigEntry OBJECT-TYPE
   SYNTAX RPDUSensorDiscreteConfigEntry
   ACCESS not-accessible
   STATUS mandatory
    DESCRIPTION
      "Configuration data from the discrete sensor being queried."
   INDEX { rPDUSensorDiscreteConfigIndex }
   ::= { rPDUSensorDiscreteConfigTable  1 }

   RPDUSensorDiscreteConfigEntry ::=
    SEQUENCE {
      rPDUSensorDiscreteConfigIndex   INTEGER,
      rPDUSensorDiscreteConfigName    DisplayString,
      rPDUSnsorDiscreteCfgNormalState INTEGER,
      rPDUSnsorDiscrteAlarmGeneration INTEGER
   }

rPDUSensorDiscreteConfigIndex OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "The index to the discrete sensor configuration data table entry."
   ::= { rPDUSensorDiscreteConfigEntry  1 }

rPDUSensorDiscreteConfigName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "The user-defined discrete sensor ID string."
   ::= { rPDUSensorDiscreteConfigEntry  2 }

rPDUSnsorDiscreteCfgNormalState OBJECT-TYPE
   SYNTAX INTEGER {
      open   (1),
      closed (2)
    }
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Indicates the normal state of the discrete input contact."
   ::= { rPDUSensorDiscreteConfigEntry  3 }

rPDUSnsorDiscrteAlarmGeneration OBJECT-TYPE
   SYNTAX RpduEnableDisableType
   ACCESS read-write
   STATUS mandatory
    DESCRIPTION
      "Indicates whether Discrete Alarm Generation is enabled."
   ::= { rPDUSensorDiscreteConfigEntry  4 }

mtrapargsD                       OBJECT IDENTIFIER ::=  { rPDU 160 }

-- The mtrapargsD group
-- These OIDs allows traps to be sent with additional arguments
-- which may not be defined in the MIB.

contactNumber  OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an integer argument that
       may not be defined in the MIB. A get of this OID will return 0."
   ::= { mtrapargsD  1 }

outletNumber  OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an integer argument that
       may not be defined in the MIB. A get of this OID will return 0."
   ::= { mtrapargsD  2 }

mtrapargsString OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an octet string argument
       that may not be defined in the MIB. A get of this OID will return
       a NULL string."
   ::= { mtrapargsD  3 }

phaseNumber  OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an integer argument that
       may not be defined in the MIB. A get of this OID will return 0."
   ::= { mtrapargsD  4 }

sensorNumber  OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an integer argument that
       may not be defined in the MIB. A get of this OID will return 0."
   ::= { mtrapargsD  5 }

deviceNameD OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an octet string argument
       that may not be defined in the MIB. A get of this OID will return
       a NULL string."
   ::= { mtrapargsD  6 }

serialNumber OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an octet string argument that
       may not be defined in the MIB. A get of this OID will return a NULL
       string."
   ::= { mtrapargsD  7 }

testTrapargsInteger OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
    DESCRIPTION
      "This OID allows traps to be sent with an integer argument that
       may not be defined in the MIB. A get of this OID will return 0."
   ::= { mtrapargsD  8 }

events                           OBJECT IDENTIFIER ::=  { rPDU 500 }

-- Traps
-- Annotations are provided for Novell's NMS product
--
-- Each trap has at least one variable (mtrapargsString) which always
-- appears as the last variable in the list. This variable contains either
-- a static or dynamically-constructed string which provides an enhanced
-- description of the trap's purpose and any pertinent information about
-- the trap.

deviceCommunicationLostCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Lost communication with device
        has been re-established.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s lost communication with device has been re-established."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 1

deviceCommunicationLostSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Lost communication with device.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s lost communication with device."
   --#ARGUMENTS {1}
   --#SEVERITY CRITICAL
   ::= 2

componentCommLostCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Lost communication with an on board component
        has been re-established.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s comm with on board component was re-established."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 3

componentCommLostSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Lost communication with an on board component.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s lost communication with an on board component."
   --#ARGUMENTS {1}
   --#SEVERITY CRITICAL
   ::= 4

cANBusOffCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: CAN bus off condition was cleared.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s CAN bus off was cleared."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 5

canBusOffSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "MINOR: CAN bus off condition was set.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s CAN bus off was set."
   --#ARGUMENTS {1}
   --#SEVERITY MINOR
   ::= 6

powerSupplyFailureCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Unit's power supply voltage is no longer out of
        tolerance.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s unit's power supply voltage is no longer out of tolerance."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 7

powerSupplyFailureSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Unit's power supply voltage is out of tolerance.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s unit's power supply voltage is out of tolerance."
   --#ARGUMENTS {1}
   --#SEVERITY CRITICAL
   ::= 8

keypadButtonStuckCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Keypad button stuck has been cleared.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s keypad button no longer stuck."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 9

keypadButtonStuckSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "MINOR: Keypad button stuck has been set.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s keypad button stuck."
   --#ARGUMENTS {1}
   --#SEVERITY MINOR
   ::= 10

dryContactAbnormalCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, contactNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Dry Contact is no longer in an abnormal state.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the contact number."
   --#SUMMARY "%s dry contact #%s is no longer in an abnormal state."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 11

dryContactAbnormalSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, contactNumber, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Dry Contact has moved to an abnormal state.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the contact number."
   --#SUMMARY "%s dry contact #%s has moved to an abnormal state."
   --#ARGUMENTS {1,2}
   --#SEVERITY CRITICAL
   ::= 12

deviceLowLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Device load is no longer below the 'Low Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s device is no longer below the 'Low Load' threshold."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 13

deviceLowLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "MINOR: Device load has fallen below the 'Low Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s Device load has fallen below the 'Low Load' threshold."
   --#ARGUMENTS {1}
   --#SEVERITY MINOR
   ::= 14

deviceNearOverLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Device load no longer exceeds the 'Near Over Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s device not over 'Near Over Load' threshold."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 15

deviceNearOverLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "MINOR: Device load has exceeded the 'Near Over Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s device is over the 'Near Over Load' threshold."
   --#ARGUMENTS {1}
   --#SEVERITY MINOR
   ::= 16

deviceOverLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Device load no longer exceeds the 'Over Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s device not over the 'Over Load' threshold."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 17

deviceOverLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Device load has exceeded the 'Over Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name."
   --#SUMMARY "%s device load is over the 'Over Load' threshold."
   --#ARGUMENTS {1}
   --#SEVERITY CRITICAL
   ::= 18

phaseLowLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, phaseNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Phase load is no longer below the 'Low Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the phase number."
   --#SUMMARY "%s phase #%s load is no longer below 'Low Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 19

phaseLowLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, phaseNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Phase load has fallen below the 'Low Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the phase number."
   --#SUMMARY "%s phase #%s load has fallen below the 'Low Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 20

phaseNearOverLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, phaseNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Phase load no longer exceeds the 'Near Over Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the phase number."
   --#SUMMARY "%s phase #%s load not over 'Near Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 21

phaseNearOverLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, phaseNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Phase load has exceeded the 'Near Over Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the phase number."
   --#SUMMARY "%s phase #%s load is over the 'Near Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 22

phaseOverLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, phaseNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Phase load no longer exceeds the 'Over Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the phase number."
   --#SUMMARY "%s phase #%s load not over the 'Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 23

phaseOverLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, phaseNumber, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Phase load has exceeded the 'Over Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the phase number."
   --#SUMMARY "%s phase #%s load is over the 'Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY CRITICAL
   ::= 24

outletLowLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Outlet load is no longer below the 'Low Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s load is not below the 'Low Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 25

outletLowLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Outlet load had fallen below the 'Low Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s load has fallen below the 'Low Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 26

outletNearOverLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Outlet load no longer exceeds the 'Near Over Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s load not over 'Near Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 27

outletNearOverLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Outlet load has exceeded the 'Near Over Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s load is over 'Near Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 28

outletOverLoadCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Outlet load no longer exceeds the 'Over Load'
       threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s load not over the 'Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 29

outletOverLoadSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Outlet load has exceeded the 'Over Load' threshold
        value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s load is over the 'Over Load' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY CRITICAL
   ::= 30

sensorDisconnectedCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor disconnected condition cleared.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s disconnected condition cleared."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 31

sensorDisconnectedSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Sensor disconnected condition set.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s disconnected condition set."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 32

sensorTypeIndeterminateCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor type indeterminate condition cleared.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s type indeterminate condition cleared."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 33

sensorTypeIndeterminateSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Sensor type indeterminate condition set.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s type indeterminate condition set."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 34

sensorTypeUnsupportedCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor type unsupported condition cleared.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s type unsupported condition cleared."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 35

sensorTypeUnsupportedSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Sensor type unsupported condition set.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s type unsupported condition set."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 36

maxTemperatureExceededCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor Temperature no longer exceeds the
       'Max Temperature' threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s temp not over 'Max Temperature' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 37

maxTemperatureExceededSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Sensor Temperature has exceeded the 'Max Temperature'
        threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s temp is over 'Max Temperature' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY CRITICAL
   ::= 38

highTemperatureExceededCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor Temperature no longer exceeds the 'High
       Temperature' threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s temp below 'High Temperature' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 39

highTemperatureExceededSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Sensor Temperature has exceeded the 'High Temperature'
        threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s temp over 'High Temperature' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 40

lowHumidityExceededCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor Humidity is no longer below the 'Low
       Humidity' threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s humidity is above 'Low Humidity' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 41

lowHumidityExceededSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: Sensor Humidity has fallen below the 'Low Humidity'
        threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s humidity is below 'Low Humidity' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 42

minHumidityExceededCleared TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor Humidity is no longer below the 'Min
       Humidity' threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s humidity is above 'Min Humidity' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 43

minHumidityExceededSet TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "CRITICAL: Sensor Humidity has fallen below the 'Min Humidity'
        threshold value.
        The first argument is the serial  number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s humidity is below 'Min Humidity' threshold."
   --#ARGUMENTS {1,2}
   --#SEVERITY CRITICAL
   ::= 44

outletTurnOn TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: An outlet has turned on.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s has turned on."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 45

outletTurnOff TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: An outlet has turned off.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s has turned off."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 46

actionCancelled TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: An outlet action has been cancelled.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s action has been cancelled."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 47

deviceConfigurationChange TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: A device configuration has been changed.
        The first argument is the serial number.
        The second argument is the device name."
   --#SUMMARY "%s device configuration has been changed."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 48

sensorConfigurationChange TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: A sensor configuration has been changed.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s configuration has been changed."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 49

outletConfigurationChange TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: An outlet configuration has been changed.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s configuration has been changed."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 50

phaseConfigurationChange TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, phaseNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: A phase configuration has been changed.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the phase number."
   --#SUMMARY "%s phase #%s configuration has been changed."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 51

dryContactConfigurationChange TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, contactNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: A dry contact configuration has been changed.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the contact number."
   --#SUMMARY "%s dry contact #%s configuration has been changed."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 52

actionInit TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: An outlet action has been initialized.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s action has been initialized."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 53

actionFailed TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: An outlet action has failed to complete.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s action has failed to complete."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 54

actionDeleted TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: An outlet action has been deleted.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s action has been deleted."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 55

syncCommandFailed TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, outletNumber, mtrapargsString }
   DESCRIPTION
       "MINOR: An outlet sync command to another unit has failed.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the outlet number."
   --#SUMMARY "%s outlet #%s sync command to another unit has failed."
   --#ARGUMENTS {1,2}
   --#SEVERITY MINOR
   ::= 56

mPOPicFwDownloadStarted TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: MPO pic fw download started.
        The first argument is the serial number.
        The second argument is the device name."
   --#SUMMARY "%s MPO pic fw download started."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 57

mPOPicFwDownloadComplete TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: MPO pic fw download complete.
        The first argument is the serial number.
        The second argument is the device name."
   --#SUMMARY "%s MPO pic fw download complete."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 58

mPOPicFwDownloadAborted TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: MPO pic fw download aborted.
        The first argument is the serial number.
        The second argument is the device name."
   --#SUMMARY "%s MPO pic fw download aborted."
   --#ARGUMENTS {1}
   --#SEVERITY INFORMATIONAL
   ::= 59

sensorCommEstablished TRAP-TYPE
   ENTERPRISE events
   VARIABLES { serialNumber, deviceNameD, sensorNumber, mtrapargsString }
   DESCRIPTION
       "INFORMATIONAL: Sensor comm established.
        The first argument is the serial number.
        The second argument is the device name.
        The third argument is the sensor number."
   --#SUMMARY "%s sensor #%s comm established."
   --#ARGUMENTS {1,2}
   --#SEVERITY INFORMATIONAL
   ::= 60

-- System generated traps

configChangeSNMP TRAP-TYPE
   ENTERPRISE events
   VARIABLES { mtrapargsString }
   DESCRIPTION
       "MINOR: The SNMP configuration has been changed."
   --#SUMMARY "The SNMP configuration has been changed."
   --#SEVERITY MINOR
   ::= 1000

accessViolationConsole TRAP-TYPE
   ENTERPRISE events
   VARIABLES { mtrapargsString }
   DESCRIPTION
       "MINOR: Someone attempted console login with incorrect password 
       three times."
   --#SUMMARY "Three unsuccessful logins were attempted via the console."
   --#SEVERITY MINOR
   ::= 1001

accessViolationHTTP TRAP-TYPE
   ENTERPRISE events
   VARIABLES { mtrapargsString }
   DESCRIPTION
       "MINOR: Someone attempted login via HTTP with incorrect password."
   --#SUMMARY "An unsuccessful attempt to login via HTTP."
   --#SEVERITY MINOR
   ::= 1002

dellTestTrap TRAP-TYPE
   ENTERPRISE events
   VARIABLES { testTrapargsInteger, mtrapargsString }
   DESCRIPTION
      "INFORMATIONAL: Trap used to test SNMP trap functionality.
       The first argument is a place holder for test variables."
   --#SUMMARY "Test Trap."
   --#SEVERITY INFORMATIONAL
   ::= 1003

END