path: root/MIBS/enterasys/CTRON-DLSW-MIB

CTRON-DLSW-MIB DEFINITIONS ::= BEGIN
 
        --  Ctron Data Link Switching MIB
        --  Revision: 1.00.00
        --  Date: October 20, 1995
        --  Part Number:

        --  Cabletron Systems, Inc.
        --  35 Industrial Way, P.O. Box 5005
        --  Rochester, NH 03867-0505
        --  (603) 332-9400
        --  support@ctron.com

        --  This module provides authoritative definitions for part
        --  of the naming tree below:
        --
        --              cabletron { enterprises 52 }
        --
        --  This module will be extended, as additional sub-sections
        --  of this naming tree are defined.
        --

        --  Cabletron Systems reserves the right to make changes in 
        --  specification and other information contained in this document 
        --  without prior notice.  The reader should consult Cabletron Systems
        --  to determine whether any such changes have been made.
        --
        --  In no event shall Cabletron Systems be liable for any incidental, 
        --  indirect, special, or consequential damages whatsoever (including 
        --  but not limited to lost profits) arising out of or related to this
        --  document or the information contained in it, even if Cabletron
        --  Systems has been advised of, known, or should have known, the 
        --  possibility of such damages.
        --
        --  Cabletron grants vendors, end-users, and other interested parties
        --  a non-exclusive license to use this Specification in connection
        --  with the management of Cabletron products.

        --  Copyright August 95 Cabletron Systems


-- This Cabletron DLSw MIB is derived from the DLSw MIB (proposed
-- by the DLSw MIB RIGlet), IBM 6611 DLSw MIB, and DCL's SOF API Spec.
-- This MIB is defined in SNMPv1 format.

-- Objects in this MIB are arranged into groups.  Each group is
-- organized as a set of related objects.  The overall structure
-- is shown below.
--
--     DLSw MIB
--     |
--     |== Node Group
--     |   |== Node Configuration
--     |
--     |== Port Group
--     |   |== Port Table
--     |
--     |== Filter Group
--     |   |== Local NETBIOS Filter Table
--     |   |== Remote NETBIOS Filter Table
--     |   |== Local MAC Filter Table
--     |   |== Remote MAC Filter Table
--     |
--     |== Transport Connection Group
--     |   |== Transport Connection Table
--     |
--     |== Trap Group
--     |
--     |== Event Log Group
--     |   |== Event Log Configuration
--     |   |== Event Log Filter Table
--     |   |== Event Log Table
 
-- Node group
--   This mandatory group contains objects required to configure and
--   monitor the operation of this DLSw.  In operation, the DLSw 
--   requires a bridge number.  This value is taken from RFC 1286; (See
--   dot1dSrPortBridgeNum contained within the associated entry in
--   dot1dSrPortTable).  Furthermore, the DLSw also requires an IP
--   address.  This value is taken from MIB II; (See ifIndex contained
--   within the associated entry in ifTable).

-- Port group
--   This mandatory group contains a table which contains an entry for
--   each DLSw port on a local ring/segment.  Each entry contains objects
--   required to configure and monitor the operation of that port.  In
--   operation, each port also requires a local ring/segment number.
--   This value is taken from RFC 1286; (See dot1dSrPortLocalSegment
--   contained within the associated entry in dot1dSrPortTable).

-- Filter Group
--   This mandatory group contains objects required to configure and
--   monitor the operation of each type filter.  It also contains a table
--   for each type filter, the entries of which define a set of filter
--   parameters.  Local filters act on frames received on any port (ie.
--   from the local ring/segment).  Remote filters act on frames
--   received on any transport connection (ie. from another DLSw).

-- Transport Connection Group
--   A Transport Connection is a full-duplex reliable connection
--   (presently TCP) between this DLSw and another Partner DLSw.
--   This mandatory group contains objects required to configure and
--   monitor the operation of Transport Connections.  It also contains
--   a table whose entries describe defined or existing Transport
--   Connections.

-- Trap Group
--   This group contains SNMP Traps used to notify the management
--   application of a change in this DLSw configuration.  Presently
--   traps are issued after a transport connection becomes enabled
--   or disabled.

-- Event Log Group


 
IMPORTS
 
        TimeTicks, IpAddress
               FROM RFC1155-SMI

        ctDLSW
               FROM CTRON-MIB-NAMES

        DisplayString
               FROM RFC1213-MIB
  
        MacAddress
               FROM BRIDGE-MIB
  
        OBJECT-TYPE
               FROM RFC-1212;
 
--  DisplayString ::= OCTET STRING

--  MacAddress   ::= OCTET STRING (SIZE (6))

NBName       ::= DisplayString (SIZE (0..16))
 
 
-- Cabletron's Data Link Switching Mib groups

ctdlswNode                  OBJECT IDENTIFIER ::= { ctDLSW 1 }
ctdlswNodeConfig            OBJECT IDENTIFIER ::= { ctdlswNode 1 }

ctdlswPort                  OBJECT IDENTIFIER ::= { ctDLSW 2 }

ctdlswFilter                OBJECT IDENTIFIER ::= { ctDLSW 3 }

ctdlswTConn                 OBJECT IDENTIFIER ::= { ctDLSW 4 }

ctdlswTrap                  OBJECT IDENTIFIER ::= { ctDLSW 5 }

ctdlswEvent                 OBJECT IDENTIFIER ::= { ctDLSW 6 }
ctdlswEventLogConfig        OBJECT IDENTIFIER ::= { ctdlswEvent 1 }
ctdlswEventLogFilterTable   OBJECT IDENTIFIER ::= { ctdlswEvent 2 }
ctdlswEventLogTable         OBJECT IDENTIFIER ::= { ctdlswEvent 3 }
 

-- *******************************************************************
-- DLSw Node Group
-- *******************************************************************
 
-- ===================================================================
-- DLSw Node Configuration
-- ===================================================================

ctdlswVersion  OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Indicates the current revision level of the DLSw firmware
        in textual format."
    ::= { ctdlswNodeConfig 1 }
 
ctdlswAdminStatus  OBJECT-TYPE
    SYNTAX INTEGER  {
        other(1),             --  none of the following
        disable(2),           --  shut down DLSw services
        enable(3)             --  start up DLSw services
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Sets the system-wide administrative state of DLSw services."
    ::= { ctdlswNodeConfig 2 }
 
ctdlswOperStatus  OBJECT-TYPE
    SYNTAX INTEGER  {
        other(1),             --  none of the following
        disabled(2),          --  inactive
        enabled(3)            --  active
    }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Indicates the current system-wide status of DLSw services."
    ::= { ctdlswNodeConfig 3 }
 
ctdlswUpTime  OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Indicates the time (in hundredths of a second) since the DLSw
        services portion of the system was enabled."
    ::= { ctdlswNodeConfig 4 }
 
ctdlswOperVirtualRingNumber  OBJECT-TYPE
    SYNTAX INTEGER (1..4095)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Specifies the operational ring/segment number that uniquely
        identifies the virtual segment to which this DLSw is connected.
        This object may only be modified when ctdlswOperStatus is
        disabled."
    DEFVAL { 1 }
    ::= { ctdlswNodeConfig 5 }
 
ctdlswNBLocalFilterType  OBJECT-TYPE
    SYNTAX INTEGER { block(1), pass(2) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Specifies the type of filtering to be applied
        to NetBIOS frames received on a local LAN segment.
        If set to block(1), any frame matching any entry in
        ctdlswNBLocalFilterTable will not be forwarded.
        If set to pass(2), only frames matching any entry in
        ctdlswNBLocalFilterTable will be forwarded."
    ::= { ctdlswNodeConfig 6 }
 
ctdlswNBRemoteFilterType  OBJECT-TYPE
    SYNTAX INTEGER { block(1), pass(2) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Specifies the type of filtering to be applied to
        NetBIOS frames received from a remote DLSw partner.
        If set to block(1), any frame matching any entry in
        ctdlswNBRemoteFilterTable will not be forwarded.
        If set to pass(2), only frames matching any entry in
        ctdlswNBRemoteFilterTable will be forwarded."
    ::= { ctdlswNodeConfig 7 }
 
ctdlswMacLocalFilterType  OBJECT-TYPE
    SYNTAX INTEGER { block(1), pass(2) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Specifies the type of address filtering to be applied
        to SNA MAC frames received on a local LAN segment.
        If set to block(1), any frame matching any entry in
        ctdlswMacLocalFilterTable will not be forwarded.
        If set to pass(2), only frames matching any entry in
        ctdlswMacLocalFilterTable will be forwarded."
    ::= { ctdlswNodeConfig 8 }
 
ctdlswMacRemoteFilterType  OBJECT-TYPE
    SYNTAX INTEGER { block(1), pass(2) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Specifies the type of address filtering to be applied
        to SNA MAC frames received from a remote DLSw partner.
        If set to block(1), any frame matching any entry in
        ctdlswMacRemoteFilterTable will not be forwarded.
        If set to pass(2), only frames matching any entry in
        ctdlswMacRemoteFilterTable will be forwarded."
    ::= { ctdlswNodeConfig 9 }

ctdlswAcceptDynamicTConn OBJECT-TYPE
    SYNTAX  INTEGER { yes(1), no(2) }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
       "Specifies whether this DLSw allows unconfigured DLSw partners
        to establish transport connections.  Yes(1) means unconfigured
        DLSw partners may establish transport connections with this
        DLSw.  No(2) means only user configured DLSw partners may
        establish transport connections with this DLSw."
    ::= { ctdlswNodeConfig 10 }
 
ctdlswDefaultPortNumber OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
       "Specifies the index of the port whose associated IP address
        will be used to identify this DLSw node to its DLSw partners.
        The value must be consistent with 'ifIndex' of mib-II."
    ::= { ctdlswNodeConfig 11 }
 
 
-- *******************************************************************
-- DLSw Port Group
-- *******************************************************************

-- ==================================================================
-- DLSw Port Table
-- ==================================================================

ctdlswPortTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "This table contains an entry for each port, and specifies
        configuration parameters used to establish circuits over that
        port.  This table is indexed by ctdlswPortName, which 
        identifies the port for which an entry exists.  These port
        configuration entries will be provided automatically based on
        the physical port configuration.  These entries cannot be
        created or deleted - only modified."
    ::= { ctdlswPort 1 }
 
ctdlswPortEntry  OBJECT-TYPE
    SYNTAX CtdlswPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "Each entry specifies configuration parameters for a port for
        which the entry exists."
    INDEX   { ctdlswPortName }
    ::= { ctdlswPortTable 1 }
 
CtdlswPortEntry ::= SEQUENCE {
    ctdlswPortIndex            INTEGER,
    ctdlswPortName             DisplayString,
    ctdlswPortAddress          MacAddress,
    ctdlswPortAdminStatus      INTEGER,
    ctdlswPortOperStatus       INTEGER,
    ctdlswPortUpTime           TimeTicks
    }
 
ctdlswPortIndex  OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "Specifies a unique value for each port.  Values are derived
        from 'ifIndex' of mib-II."
    ::= { ctdlswPortEntry 1 }
 
ctdlswPortName  OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..8))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "Specifies the user friendly name for this port."
    ::= { ctdlswPortEntry 2 }
 
ctdlswPortAddress  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "Specifies the MAC address of this port."
    ::= { ctdlswPortEntry 3 }
 
ctdlswPortAdminStatus  OBJECT-TYPE
    SYNTAX INTEGER  {
        other(1),
        disabled(2),
        enabled(3)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Sets the administrative state of DLSw frame forwarding
        for this port."
    ::= { ctdlswPortEntry 4 }
 
ctdlswPortOperStatus  OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),           --  none of the following
        disabled(2),        --  inactive
        enabled(3)          --  active
    }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Specifies the current operating status of DLSw frame
        forwarding for this port."
    ::= { ctdlswPortEntry 5 }
 
ctdlswPortUpTime  OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Indicates the time (in hundredths of a second) since this port
        was enabled.  A value of zero means this port is not presently
        enabled."
    ::= { ctdlswPortEntry 6 }


-- *******************************************************************
-- DLSw Filter Group
-- *******************************************************************

-- ==================================================================
-- DLSw Local NETBIOS Name Filter Table
--
-- The local NetBIOS filter table applies to NetBIOS frames generated on
-- locally attached LANS.
-- ===================================================================

ctdlswLocalNBFilterTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswLocalNBFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "A list of NETBIOS source-destination name pairs whose frames
        are allowed (or not allowed) to be forwarded via this DLSw.
        Only source-destination name pairs from locally generated 
        NetBIOS frames are compared against entries in this table."
    ::= { ctdlswFilter 1 }
 
ctdlswLocalNBFilterEntry  OBJECT-TYPE
    SYNTAX CtdlswLocalNBFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "Information for one NetBIOS source-destination name pair."
    INDEX   { ctdlswLocalNBFilterSrcName, ctdlswLocalNBFilterDestName }
    ::= { ctdlswLocalNBFilterTable 1 }
 
CtdlswLocalNBFilterEntry ::= SEQUENCE {
    ctdlswLocalNBFilterSrcName         NBName,
    ctdlswLocalNBFilterDestName        NBName,
    ctdlswLocalNBFilterControl         INTEGER
    }
 
ctdlswLocalNBFilterSrcName  OBJECT-TYPE
    SYNTAX  NBName
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The source NETBIOS name to filter on."
    ::= { ctdlswLocalNBFilterEntry 1 }
 
ctdlswLocalNBFilterDestName  OBJECT-TYPE
    SYNTAX  NBName
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The destination NETBIOS NAME to filter on."
    ::= { ctdlswLocalNBFilterEntry 2 }
 
ctdlswLocalNBFilterControl  OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        create(2),
        delete(3)
    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
       "Set this object to delete(3) to remove this entry.  Set to
        create(2) to add this entry.  A get of this object will return
        other(1)."
    ::= { ctdlswLocalNBFilterEntry 3 }
 
-- ==================================================================
-- DLSw Remote NETBIOS Name Filter Table
--
-- The remote NetBIOS filter table applies to NetBIOS frames received from
-- remote DLSw partners.
-- ===================================================================

ctdlswRemoteNBFilterTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswRemoteNBFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "A list of NETBIOS source-destination name pairs whose frames
        are allowed (or not allowed) to be forwarded via this DLSw.
        Only source-destination name pairs from NetBIOS frames received
        from remote DLSw partners are compared against entries in this table."
    ::= { ctdlswFilter 2 }
 
ctdlswRemoteNBFilterEntry  OBJECT-TYPE
    SYNTAX CtdlswRemoteNBFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "Information for one NetBIOS source-destination name pair."
    INDEX   { ctdlswRemoteNBFilterSrcName, ctdlswRemoteNBFilterDestName }
    ::= { ctdlswRemoteNBFilterTable 1 }
 
CtdlswRemoteNBFilterEntry ::= SEQUENCE {
    ctdlswRemoteNBFilterSrcName         NBName,
    ctdlswRemoteNBFilterDestName        NBName,
    ctdlswRemoteNBFilterControl         INTEGER
    }
 
ctdlswRemoteNBFilterSrcName  OBJECT-TYPE
    SYNTAX  NBName
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The source NETBIOS name to filter on."
    ::= { ctdlswRemoteNBFilterEntry 1 }
 
ctdlswRemoteNBFilterDestName  OBJECT-TYPE
    SYNTAX  NBName
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The destination NETBIOS name to filter on."
    ::= { ctdlswRemoteNBFilterEntry 2 }
 
ctdlswRemoteNBFilterControl  OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        create(2),
        delete(3)
    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
       "Set this object to delete(3) to remove this entry.  Set to
        create(2) to add this entry.  A get of this object will return
        other(1)."
    ::= { ctdlswRemoteNBFilterEntry 3 }
 
-- ===================================================================
-- DLSw Local SNA MAC Address Filter Table
--
-- The local MAC filter table applies to SNA MAC frames generated on locally
-- attached LANS.
-- ==================================================================

ctdlswLocalMacFilterTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswLocalMacFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "A list of source-destination MAC address pairs whose frames
        are allowed (or not allowed) to be forwarded via this DLSw.
        Only source-destination name pairs from locally generated 
        SNA MAC frames are compared against entries in this table."
    ::= { ctdlswFilter 3 }
 
ctdlswLocalMacFilterEntry  OBJECT-TYPE
    SYNTAX CtdlswLocalMacFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "Information for one source-destination MAC address pair."
    INDEX   { ctdlswLocalMacFilterSrcAddr,  ctdlswLocalMacFilterSrcMask,
              ctdlswLocalMacFilterDestAddr, ctdlswLocalMacFilterDestMask }
    ::= { ctdlswLocalMacFilterTable 1 }
 
CtdlswLocalMacFilterEntry ::= SEQUENCE {
    ctdlswLocalMacFilterSrcAddr       MacAddress,
    ctdlswLocalMacFilterSrcMask       MacAddress,
    ctdlswLocalMacFilterDestAddr      MacAddress,
    ctdlswLocalMacFilterDestMask      MacAddress,
    ctdlswLocalMacFilterControl       INTEGER
    }
 
ctdlswLocalMacFilterSrcAddr  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The source MAC Address to filter on."
    ::= { ctdlswLocalMacFilterEntry 1 }
 
ctdlswLocalMacFilterSrcMask  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The source MAC Address mask to filter on."
    ::= { ctdlswLocalMacFilterEntry 2 }
 
ctdlswLocalMacFilterDestAddr  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The destination MAC Address to filter on."
    ::= { ctdlswLocalMacFilterEntry 3 }
 
ctdlswLocalMacFilterDestMask  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The destination MAC Address mask to filter on."
    ::= { ctdlswLocalMacFilterEntry 4 }
 
ctdlswLocalMacFilterControl  OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        create(2),
        delete(3)
    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
       "Set this object to delete(3) to remove this entry.  Set to
        create(2) to add this entry.  A get of this object will return
        other(1)."
    ::= { ctdlswLocalMacFilterEntry 5 }
 
-- ===================================================================
-- DLSw Remote MAC Address Filter Table
--
-- The remote MAC filter table applies to SNA MAC frames received from
-- remote DLSw partners.
-- ===================================================================

ctdlswRemoteMacFilterTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswRemoteMacFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "A list of source-destination MAC address pairs whose frames
        are allowed (or not allowed) to be forwarded via this DLSw.
        Only source-destination name pairs from SNA MAC frames received
        from remote DLSw partners are compared against entries in this table."
    ::= { ctdlswFilter 4 }
 
ctdlswRemoteMacFilterEntry  OBJECT-TYPE
    SYNTAX CtdlswRemoteMacFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "Information for one source-destination MAC address pair."
    INDEX   { ctdlswRemoteMacFilterSrcAddr,  ctdlswRemoteMacFilterSrcMask,
              ctdlswRemoteMacFilterDestAddr, ctdlswRemoteMacFilterDestMask }
    ::= { ctdlswRemoteMacFilterTable 1 }

CtdlswRemoteMacFilterEntry ::= SEQUENCE {
    ctdlswRemoteMacFilterSrcAddr       MacAddress,
    ctdlswRemoteMacFilterSrcMask       MacAddress,
    ctdlswRemoteMacFilterDestAddr      MacAddress,
    ctdlswRemoteMacFilterDestMask      MacAddress,
    ctdlswRemoteMacFilterControl       INTEGER
    }
 
ctdlswRemoteMacFilterSrcAddr  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The source MAC Address to filter on."
    ::= { ctdlswRemoteMacFilterEntry 1 }
 
ctdlswRemoteMacFilterSrcMask  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The source MAC Address mask to filter on."
    ::= { ctdlswRemoteMacFilterEntry 2 }
 
ctdlswRemoteMacFilterDestAddr  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The destination MAC Address to filter on."
    ::= { ctdlswRemoteMacFilterEntry 3 }
 
ctdlswRemoteMacFilterDestMask  OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "The destination MAC Address mask to filter on."
    ::= { ctdlswRemoteMacFilterEntry 4 }
 
ctdlswRemoteMacFilterControl  OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        create(2),
        delete(3)
    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
       "Set this object to delete(3) to remove this entry.  Set to
        create(2) to add this entry.  A get of this object will return
        other(1)."
    ::= { ctdlswRemoteMacFilterEntry 5 }


-- *******************************************************************
-- DLSw Transport Connection (Partner) Group
-- *******************************************************************

-- ===================================================================
-- DLSw Transport Connection (Partner) Table
-- ===================================================================

ctdlswTConnTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswTConnEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "A list of transport connections which are either user defined
        or dynamically created for this DLSw."
    ::= { ctdlswTConn 1 }
 
ctdlswTConnEntry  OBJECT-TYPE
    SYNTAX CtdlswTConnEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       ""
    INDEX   { ctdlswTConnRemoteTAddr }
    ::= { ctdlswTConnTable 1 }
 
CtdlswTConnEntry ::= SEQUENCE {
    ctdlswTConnRemoteTAddr          IpAddress,
    ctdlswTConnControl              INTEGER,
    ctdlswTConnUpTime               TimeTicks,
    ctdlswTConnOperStatus           INTEGER,
    ctdlswTConnType                 INTEGER
    }
 
ctdlswTConnRemoteTAddr  OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
       "Specifies the remote transport address for this transport
        connection.  It can be defined by the user, or established
        dynamically upon receiving a connection setup request from
        another DLSw."
    ::= { ctdlswTConnEntry 1 }
 
ctdlswTConnControl  OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        create(2),
        delete(3)
    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
       "Set this object to delete(3) to remove this entry.  Set to
        create(2) to add this entry.  A get of this object will
        return other(1)."
    ::= { ctdlswTConnEntry 2 }
 
ctdlswTConnUpTime  OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Indicates the time (in hundredths of a second) since this
        transport connection was last established.  A value of zero
        means this transport connection is not presently established."
    ::= { ctdlswTConnEntry 3 }
 
ctdlswTConnOperStatus  OBJECT-TYPE
    SYNTAX INTEGER  {
        other(1),             --  none of the following
        disabled(2),          --  inactive
        enabled(3),           --  active
        pendingDisable(4),    --  deactivate in progress
        pendingEnable(5)      --  activate in progress
    }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Indicates the status of this transport connection."
    ::= { ctdlswTConnEntry 4 }
 
ctdlswTConnType  OBJECT-TYPE
    SYNTAX INTEGER  {
        configured(1),
        dynamic(2)
    }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Indicates the means by which this transport connection was
        determined.  Configured(1) means this entry was user defined.
        Dynamic(2) means this entry was not user defined but was 
        created as a result of a connection initiated by another DLSw."
    ::= { ctdlswTConnEntry 5 }

 
-- *******************************************************************
-- DLSW EVENT LOG GROUP
-- *******************************************************************
-- ...............................................................
-- Event Log Configuration
-- ...............................................................

ctdlswEventAdminStatus OBJECT-TYPE
    SYNTAX INTEGER {
           other(1),
           disabled(2),
           enabled(3)
           }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Set the administrative state of Data Link Switching event
        logging. enabled(3) causes the event log to become active.
        disabled(2) causes the event log to become inactive."
    DEFVAL { disabled }
    ::= { ctdlswEventLogConfig 1 }

ctdlswEventMaxEntries OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Sets the maximum number of entries allowed in the event log
       table.  When the number of entries reaches the value of
       ctdlswEventMaxEntries the first (oldest) entry is deleted
       to allow a new entry to be added."
    DEFVAL { 100 }
    ::= { ctdlswEventLogConfig 2 }

ctdlswEventTraceAll OBJECT-TYPE
    SYNTAX INTEGER {
           other(1),
           disabled(2),
           enabled(3)
           }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "enabled(3) allows logging of all event types.
        disabled(2) causes the event log filter table to specify
        which events to log."
    DEFVAL { enabled }
    ::= { ctdlswEventLogConfig 3 }

-- ...............................................................
-- Event Log Filter Table
-- ...............................................................

ctdlswEventFilterTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswEventFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "This table contains descriptions of how to filter log entries."
    ::= { ctdlswEventLogFilterTable 1 }

ctdlswEventFilterEntry OBJECT-TYPE
    SYNTAX CtdlswEventFilterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry specifies the filter for log entries.  The
        instance ctdlswEventProtocol refers to the instance used
        in the nwRtgProtocolTable and nwComponentTable specified
        by the ctrouter-mib.txt. "
    INDEX   { ctdlswEventFltrProtocol, ctdlswEventFltrIfNum }
    ::= { ctdlswEventFilterTable 1 }

CtdlswEventFilterEntry ::= SEQUENCE {
    ctdlswEventFltrProtocol   INTEGER,
    ctdlswEventFltrIfNum      INTEGER,
    ctdlswEventFltrControl    INTEGER,
    ctdlswEventFltrType       INTEGER,
    ctdlswEventFltrSeverity   INTEGER,
    ctdlswEventFltrAction     INTEGER
    }

ctdlswEventFltrProtocol OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Selects the protocol to log events from."
    ::= { ctdlswEventFilterEntry 1 }

ctdlswEventFltrIfNum OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Specifies the port on which to log events."
    ::= { ctdlswEventFilterEntry 2 }

ctdlswEventFltrControl OBJECT-TYPE
    SYNTAX INTEGER {
           other(1),
           delete(2),
           add(3)
           }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "Setting this field to delete will allow entries to be
        removed from the table.  This is done by adding new entries
        with instance fields that match the entry to be removed from
        the table.  The new entry being added must have this control
        field set to delete in order for the matching entry already
        in the table to be deleted.  Setting this field to add will
        add the entry to the table."
    ::= { ctdlswEventFilterEntry 3 }

ctdlswEventFltrType OBJECT-TYPE
    SYNTAX INTEGER {
           misc(1),
           timer(2),
           rcv(4),
           xmit(8),
           event(16),
           error(32)
           }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "This bit field mask filter will allow only events of
        certain types to be logged.  By default all types will be
        logged.  Clearing event types from this field will cause
        those types not to be logged.  Adding event types to this
        field will enable those types to be logged. "
    ::= { ctdlswEventFilterEntry 4 }

ctdlswEventFltrSeverity OBJECT-TYPE
    SYNTAX INTEGER {
           highest(1),
           highmed(2),
           highlow(3)
           }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "This filter controls the amount of logging by ignoring events
        of lower priority than that specified by the filter value.
        Specifying highest(1) causes all events except those of highest
        severity to be ignored. Specifying highmed(2) causes lowest
        severity events to be ignored.  Specifying highlow(3) causes
        all events to be logged.  highmed(2) is the default setting."
    ::= { ctdlswEventFilterEntry 5 }

ctdlswEventFltrAction OBJECT-TYPE
    SYNTAX INTEGER {
           log(1),
           trap(2),
           logTrap(3)
           }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
       "This field specifies how the events are to be logged.
        Specifying log(1) stores the events in the event log
        table (defined below).  Specifying trap(2) sends events
        out through the trap mechanism. Specifying logTrap(3)
        does both. "
    ::= { ctdlswEventFilterEntry 6 }

-- ...............................................................
-- Event Log Table
-- ...............................................................

ctdlswEventTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CtdlswEventEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
       "This table contains all events that have been logged."
    ::= { ctdlswEventLogTable 1 }

ctdlswEventEntry OBJECT-TYPE
    SYNTAX CtdlswEventEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry specifies events that have been logged."
    INDEX { ctdlswEventNumber }
    ::= { ctdlswEventTable 1 }

CtdlswEventEntry ::= SEQUENCE {
    ctdlswEventNumber         INTEGER,
    ctdlswEventTime           TimeTicks,
    ctdlswEventType           INTEGER,
    ctdlswEventSeverity       INTEGER,
    ctdlswEventProtocol       INTEGER,
    ctdlswEventIfNum          INTEGER,
    ctdlswEventTextString     OCTET STRING
    }

ctdlswEventNumber OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "The number uniquely identifies events."
    ::= { ctdlswEventEntry 1 }

ctdlswEventTime OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "This number specifies when the event was logged."
    ::= { ctdlswEventEntry 2 }

ctdlswEventType OBJECT-TYPE
    SYNTAX INTEGER {
           misc(1),
           timer(2),
           rcv(4),
           xmit(8),
           event(16),
           error(32)
           }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Specifies type of event logged."
    ::= { ctdlswEventEntry 3 }

ctdlswEventSeverity OBJECT-TYPE
    SYNTAX INTEGER {
           highest(1),
           highmed(2),
           highlow(3)
           }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Specifies the severity of the event logged."
    ::= { ctdlswEventEntry 4 }

ctdlswEventProtocol OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Specifies the protocol where the event occured."
    ::= { ctdlswEventEntry 5 }

ctdlswEventIfNum          OBJECT-TYPE
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION
        "Specifies the port the event occurred on."
    ::= { ctdlswEventEntry 6 }

ctdlswEventTextString OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
       "Specifies the actual text string to be logged."
    ::= { ctdlswEventEntry 7 }

END