path: root/MIBS/enterasys/CTRON-PRIORITY-EXTENSIONS-MIB

CTRON-PRIORITY-EXTENSIONS-MIB DEFINITIONS ::= BEGIN

--  ctron-priority-extensions-mib.txt
--  Revision: 01.01.02
--  Part Number: 
--  Date: February 17, 1997


--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for Cabletron's
--  enterprise-specific priority extensions MIB.
--
--  This module will be extended, as required.
--

--  Cabletron Systems reserves the right to make changes in 
--  specification and other information contained in this document 
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental, 
--  indirect, special, or consequential damages whatsoever (including 
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the 
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.

--  Copyright December 1997 Cabletron Systems
        
IMPORTS
        OBJECT-TYPE
                FROM RFC-1212
        PhysAddress
                FROM RFC1213-MIB
        ctPriorityExt
                FROM CTRON-MIB-NAMES;
        
-- PhysAddress     ::= OCTET STRING

-- The ctPriorityExt MIB is used to control priority packet forwarding.
-- Priority packet forwarding provides the ability to designate certain 
-- packets to be of higher importance than others.  This control allows
-- for the forwarding of higher priority packets before those of lower priority.
-- This functionality is essential for time critical applications on 
-- shared networks. 



ctPriorityExtTxQueue  OBJECT IDENTIFIER
   ::= { ctPriorityExt 1 }

-- The ctPriorityExtTxQueue group specifies the number of 
-- transmit queues supported for each physical interface on the device.
-- Which transmit queue a packet is placed on will be determined by
-- associating each priority level (0-7) with a particular transmit
-- queue. Specifically the priority mappings will be as follows:
--
--               +=====================================+
--               |Priority | Number of Transmit Queues |
--               | Level   ========================+===|
--               |         | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
--               |=========+===+===+===+===+===+===+===|
--               |    0    | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
--               +=========+===+===+===+===+===+===+===| O T
--               |    1    | 1 | 1 | 1 | 1 | 1 | 1 | 1 | u X
--               +=========+===+===+===+===+===+===+===| t
--               |    2    | 1 | 1 | 1 | 1 | 1 | 1 | 2 | b Q
--               +=========+===+===+===+===+===+===+===| o u
--               |    3    | 1 | 1 | 1 | 2 | 2 | 2 | 3 | u e
--               +=========+===+===+===+===+===+===+===| n u
--               |    4    | 1 | 1 | 2 | 2 | 3 | 3 | 4 | d e
--               +=========+===+===+===+===+===+===+===|
--               |    5    | 1 | 1 | 2 | 3 | 4 | 4 | 5 |
--               +=========+===+===+===+===+===+===+===|
--               |    6    | 1 | 1 | 2 | 3 | 4 | 5 | 6 |
--               +=========+===+===+===+===+===+===+===|
--               |    7    | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
--               +=========+===+===+===+===+===+===+===|
--
--
-- The implementation of this group is MANDANTORY.


ctPriorityExtTXQueueTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CtPriorityExtTXQueueEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides information pertaining to the number
        of physical transmit queues per interface."
    ::= { ctPriorityExtTxQueue 1 }


ctPriorityExtTXQueueEntry OBJECT-TYPE
    SYNTAX CtPriorityExtTXQueueEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Specifies the number of transmit queues for this interface."
    INDEX { ctPriorityExtSlotNum, ctPriorityExtInterfaceNum }
    ::= { ctPriorityExtTXQueueTable 1 }


CtPriorityExtTXQueueEntry ::= SEQUENCE {
        ctPriorityExtSlotNum
                INTEGER,
        ctPriorityExtInterfaceNum
                INTEGER,
        ctPriorityExtNumTXQueues
                INTEGER
        }

ctPriorityExtSlotNum OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The slot num of the device that the interface is located on."
    ::= { ctPriorityExtTXQueueEntry 1 }

ctPriorityExtInterfaceNum OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The interface number for which the information is requested.
         This is equal to the MIB-II ifIndex."
    ::= { ctPriorityExtTXQueueEntry 2 }

ctPriorityExtNumTXQueues OBJECT-TYPE
    SYNTAX INTEGER (1..8) 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of physical transmit queues for the requested interface."
    ::= { ctPriorityExtTXQueueEntry 3 }


ctPriorityExtMACConfig  OBJECT IDENTIFIER ::= { ctPriorityExt 2 }

-- The control is defined by creating a row in the ctPriorityExtMacTable
-- specifying the MAC address, address type, packet type, and VLAN ID
-- with ctPriorityExtMACPriority set to a value in the range of 1 to 8.
-- When an entry is made in the aforementioned table all packets
-- matching those criteria will be forwarded with the specifed priority.
-- Additionally any ports that support IEEE 802.1p and 802.1q frame tagging
-- will encode the priority in the frame tag of the packet.
-- The implementation of this group is optional.


ctPriorityExtMACStatus OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Defines the status of the priority packet forwarding based
        on MAC address.  Setting ctIfPriorityExtMACStatus to a value of 
        disable(2), disables the forwarding of packets based on priority table 
        information.  All information remains in existence but is not 
        considered in the forwarding decision."
    DEFVAL { enable }
    ::= { ctPriorityExtMACConfig 1 }

ctPriorityExtNumMACEntries OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of active entries in the ctPriorityExtMACTable."
    ::= { ctPriorityExtMACConfig 2 }

ctPriorityExtMaxNumMACEntries OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of entries allowed in the ctPriorityExtMACTable."
    ::= { ctPriorityExtMACConfig 3 }

ctPriorityExtMaxNumPktTypesPerMACEntry OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of packet types that can be asssociated
        with any one MAC address in the ctPriorityExtMACTable"
    ::= { ctPriorityExtMACConfig 4 }



ctPriorityExtMACTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CtPriorityExtMACEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides the ability to specify priority based
        on the MAC addresses encoded in a packet.  There are several
        possible permutations achieveable via this table. Priorities
        in this table may be based on the following criteria:
             
           Destination address and specific packet type and VLAN ID
           Destination address and specific packet type
           Destination address
           Source address and specific packet type and VLAN ID
           Source address and specific packet type
           Source address
           Destination or source address and specific packet type and VLAN ID 
           Destination or source address and specific packet type
           Destination or source address
        Depending on the values set in the table which of these criteria
        will be used for any given packet.

        If any given relationship can not be created the set will fail with a 
        BAD-VALUE error."
    ::= { ctPriorityExtMACConfig 5 }


ctPriorityExtMACEntry OBJECT-TYPE
    SYNTAX CtPriorityExtMACEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Describes a particular MAC address priority entry."
    INDEX { ctPriorityExtMACAddr, ctPriorityExtAddrType,
        ctPriorityExtMACPktType, ctPriorityExtMACVlanId }
    ::= { ctPriorityExtMACTable 1 }

CtPriorityExtMACEntry ::= SEQUENCE {
        ctPriorityExtMACAddr
                PhysAddress,
        ctPriorityExtAddrType
                INTEGER,
        ctPriorityExtMACPktType
                INTEGER,
        ctPriorityExtMACVlanId
                INTEGER,
        ctPriorityExtMACPriority
                INTEGER}

ctPriorityExtMACAddr OBJECT-TYPE
    SYNTAX PhysAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The MAC address which will have a priority associated with it
        as specified by ctPriorityExtMACPriority." 
    ::= { ctPriorityExtMACEntry 1 }

ctPriorityExtAddrType OBJECT-TYPE
    SYNTAX INTEGER {
        destAddr(1),
        srcAddr(2),
        destOrSource(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of MAC address which will have priority associated
        with it as specified by ctPriorityExtMACPriority."
    ::= { ctPriorityExtMACEntry 2 }

ctPriorityExtMACPktType OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The packet type associated with a particular MAC address,
        specified by ctPriorityExtMACAddr, which will have priority
        associated with it as specified by ctPriorityExtMACPriority.
        A value of 1 indicates that this entry pertains to all 
        packet types.  A single value in the range of 0x0600..0xFFFF
        indicates that this entry only pertains to that particular packet
        type."
    ::= { ctPriorityExtMACEntry 3 }

ctPriorityExtMACVlanId OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A set of 65335 (0xFFFF) causes the priority value specified in 
         ctPriorityExtMACPriority to apply to all packets
         matching the criteria specified by ctPriorityExtMACAddr, 
         ctPriorityExtAddrType, and ctPriorityExtMACPktType. Any 
         value between 1 and 4095 is a valid VLAN ID (IEEE 802.1q)
         and causes ctPriorityExtMACPriority to only apply
         to packets that are of matching the above criteria and that are 
         members of the IEEE 802.1q VLAN specified by the value set."
--    DEFVAL { 65535 }
   ::= { ctPriorityExtMACEntry 4 }

ctPriorityExtMACPriority OBJECT-TYPE
    SYNTAX INTEGER {
         priority0(1), -- Lowest Priority
         priority1(2),   
         priority2(3),   
         priority3(4),
         priority4(5),
         priority5(6),
         priority6(7),
         priority7(8), -- Highest Priority
         delete(100)       
         }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A set of delete(100) will delete this row from the 
        ctPriorityExtMACTable.  A set of priority(1-8) will either
        create a row in the ctPriorityExtMACTable with the specified
        priority or modify an existing entry with the newly specified 
        priority."
    ::= { ctPriorityExtMACEntry 5 }


ctPriorityExtPktTypeConfig      OBJECT IDENTIFIER ::= { ctPriorityExt 3 }
-- Control of priorities is based exclusively on packet
-- type and optionally VLAN ID.  This control is defined by creating a 
-- row in the ctPriorityExtPktTypeTable specifying the packet type with 
-- ctPriorityExtPktTypePriority set to a value in the range of 1-8.
-- When an entry is made in the aforementioned table all packets
-- matching those criteria will be forwarded with the specifed priority.
-- Additionally any ports that support IEEE 802.1p and 802.1q frame tagging 
-- will encode the priority in the frame tag of the packet.
-- The implementation of this group is optional.

ctPriorityExtPktTypeStatus      OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Defines the status of the priority packet forwarding based 
        exclusively on packet type.  Setting ctIfPriorityPktTypeExtStatus 
        to a value of disable(2) disables the forwarding of packets 
        based on priority table information.  All information remains 
        in existence but is not considered in the forwarding decision."
    DEFVAL { enable }
    ::= { ctPriorityExtPktTypeConfig 1 }


ctPriorityExtNumPktTypeEntries OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of active entries in the ctPriorityExtPktTypeTable."
    ::= { ctPriorityExtPktTypeConfig 2 }

ctPriorityExtMaxNumPktTypeEntries OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of entries allowed in the 
        ctPriorityExtPktTypeTable."
    ::= { ctPriorityExtPktTypeConfig 3 }

ctPriorityExtPktTypeTable     OBJECT-TYPE
    SYNTAX SEQUENCE OF CtPriorityExtPktTypeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides the ability to specify priority based
        on the packet type encoded in a packet. Priorities  
        in this table may be based on the following criteria:
             
           Packet type and VLAN ID
           Packet type

        If any given relationship can not be created the set will fail with a 
        BAD-VALUE error."
    ::= { ctPriorityExtPktTypeConfig 4 }


ctPriorityExtPktTypeEntry       OBJECT-TYPE
    SYNTAX CtPriorityExtPktTypeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Describes a particular packet type priority entry."
    INDEX { ctPriorityExtPktType, ctPriorityExtPktTypeVlanId }
    ::= { ctPriorityExtPktTypeTable 1 }


CtPriorityExtPktTypeEntry ::= SEQUENCE {
        ctPriorityExtPktType
                INTEGER,
        ctPriorityExtPktTypeVlanId
                INTEGER,
        ctPriorityExtPktTypePriority
                INTEGER}

ctPriorityExtPktType OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The packet type which will have priority associated with 
        it as specified by ctPriorityExtPktTypePriority.
        A value of 1 indicates that this entry pertains to all 
        packet types.  A single value in the range of 0x0600..0xFFFF
        indicates that this entry only pertains to that particular packet
        type."
    ::= { ctPriorityExtPktTypeEntry 1 }

ctPriorityExtPktTypeVlanId OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A set of 65535 (0xFFFF) causes the priority value specified in 
         ctPriorityExtPktTypePriority to apply to all packets
         of the type specified by ctPriorityExtPktType.  Any
         value between 1 and 4095 is a valid VLAN ID (IEEE 802.1q)
         and causes ctPriorityExtPktTypePriority to only apply
         to packets that are of ctPriorityExtPktType type and are 
         members of the IEEE 802.1q VLAN specified by the value set."
--    DEFVAL { 65535 }
    ::= { ctPriorityExtPktTypeEntry 2 }

ctPriorityExtPktTypePriority OBJECT-TYPE
    SYNTAX INTEGER {
         priority0(1), -- Lowest Priority
         priority1(2),   
         priority2(3),   
         priority3(4),
         priority4(5),
         priority5(6),
         priority6(7),
         priority7(8), -- Highest Priority
         delete(100)      
         }
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION
        "A set of delete(100) will delete this row from the 
        ctPriorityExtPriorityTypeTable.  A set of priority(1-8) will either
        create a row in the ctPriorityExtPriorityTypeTable with the specified
        priority or modify an existing entry with the newly specified 
        priority."
    ::= { ctPriorityExtPktTypeEntry 3 }



ctPriorityExtPortConfig OBJECT IDENTIFIER ::= { ctPriorityExt 4 }

-- Control of priorities is based exclusively on port.
-- Each port will have a priority associated with it.
-- When a packet is recieved on that port it will 
-- be given the priority of the port it is received on.
-- If the incoming packet already has a priority associated 
-- with it, the incoming priority will remain intact, or be replaced
-- with the port priority, based on the value of 
-- ctPriorityExtPortFwdInboundPriority.
-- The implementation of this group is optional.

ctPriorityExtPortStatus OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Defines the status of the priority packet forwarding based
        on receive port.  Setting ctIfPriorityExtPortStatus to a value of 
        disable(2), disables the forwarding of packets based on priority table 
        information.  All information remains in existence but is not 
        considered in the forwarding decision."
    DEFVAL { enable }
    ::= { ctPriorityExtPortConfig 1 }

ctPriorityExtPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CtPriorityExtPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides information pertaining to the priority associated 
         with a receive port."
    ::= { ctPriorityExtPortConfig 2 }


ctPriorityExtPortEntry OBJECT-TYPE
    SYNTAX CtPriorityExtPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Specifies the priority associated with a specific physical 
        interface."
    INDEX { ctPriorityExtPortSlotNum, ctPriorityExtPortInterfaceNum }
    ::= { ctPriorityExtPortTable 1 }


CtPriorityExtPortEntry ::= SEQUENCE {
        ctPriorityExtPortSlotNum
                INTEGER,
        ctPriorityExtPortInterfaceNum
                INTEGER,
        ctPriorityExtPortPriority
                INTEGER,
        ctPriorityExtFwdInboundPriority
                INTEGER
        }

ctPriorityExtPortSlotNum OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The slot num of the device that the interface is located on."
    ::= { ctPriorityExtPortEntry 1 }


ctPriorityExtPortInterfaceNum OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The interface number for which the information is requested."
    ::= { ctPriorityExtPortEntry 2 }

ctPriorityExtPortPriority OBJECT-TYPE
    SYNTAX INTEGER {
         priority0(1), -- Lowest Priority
         priority1(2),   
         priority2(3),   
         priority3(4),
         priority4(5),
         priority5(6),
         priority6(7),
         priority7(8) -- Highest Priority
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A set of priority(1-8) will modify an existing entry 
        with the newly specified priority.  Entries cannot be 
        deleted from this table."
    DEFVAL { priority0 }
    ::= { ctPriorityExtPortEntry 3 }

ctPriorityExtFwdInboundPriority OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This controls whether a packet that is received with a priority tag
        is forwarded with the priority encoded in the tag or the default
        priority of the port.  A value of enable(1) means the packet will 
        be forwarded with the priority encoded in the tag.  A value of
        disable(2) means the packet will be given the default priority
        of the port it was received on." 
    DEFVAL { enable }
    ::= { ctPriorityExtPortEntry 4 }

END