path: root/MIBS/enterasys/CTRON-REMOTE-ACCESS-MIB

CTRON-REMOTE-ACCESS-MIB DEFINITIONS ::= BEGIN

--  ctron-remote-access-mib.txt  The Cabletron Remote Access MIB.
--  Revision: 1.00.04 
--  Part Number: 
--  Date:  November 24, 1998 
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for part
--  of the naming tree below:
--
--  cabletron { enterprises 52 }
--
--  This module will be extended, as additional sub-sections
--  of this naming tree are defined.
--

--  Cabletron Systems reserves the right to make changes in 
--  specification and other information contained in this document 
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental, 
--  indirect, special, or consequential damages whatsoever (including 
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the 
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.

--  Copyright August 1997 Cabletron Systems


   IMPORTS
        IpAddress, Counter,enterprises          FROM RFC1155-SMI
        DisplayString                           FROM RFC1213-MIB
        OBJECT-TYPE                             FROM RFC-1212;


        Index ::= INTEGER

        DLCI ::= INTEGER

        --  DisplayString ::= OCTET STRING

        cabletron               OBJECT IDENTIFIER ::= { enterprises 52 }
--                      1.3.6.1.4.1.52

        mibs                    OBJECT IDENTIFIER ::= { cabletron 4 }
--                      1.3.6.1.4.1.52.4

        ctron                   OBJECT IDENTIFIER ::= { mibs 1 }
--                      1.3.6.1.4.1.52.4.1

        ctDataLink              OBJECT IDENTIFIER ::= { ctron 2 }
--                      1.3.6.1.4.1.52.4.1.2

        ctronWan                OBJECT IDENTIFIER ::= { ctDataLink 7 }
--                      1.3.6.1.4.1.52.4.1.2.7

        ctRemoteAccess          OBJECT IDENTIFIER ::= { ctronWan 2 }
--                      1.3.6.1.4.1.52.4.1.2.7.2
----------------------------------------------------------
-- Groups

        ctRemoteConnection      OBJECT IDENTIFIER ::= { ctRemoteAccess 1 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.1

        ctDs1Ext                OBJECT IDENTIFIER ::= { ctRemoteAccess 2 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.2

        ctRs232Ext              OBJECT IDENTIFIER ::= { ctRemoteAccess 3 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.3

        ctFrDcp                 OBJECT IDENTIFIER ::= { ctRemoteAccess 4 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.4

        ctDDSExt                OBJECT IDENTIFIER ::= { ctRemoteAccess 5 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.5

        ctPPPExt                OBJECT IDENTIFIER ::= { ctRemoteAccess 6 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.6
    
        ctWanalyzer             OBJECT IDENTIFIER ::= { ctRemoteAccess 7 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.7

    ctDs1Alarms     OBJECT IDENTIFIER ::= { ctRemoteAccess 8 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.8

    ctIPPQFilters  OBJECT IDENTIFIER  ::= { ctRemoteAccess 9 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.9
        
        ctDs3Ext                OBJECT IDENTIFIER ::= { ctRemoteAccess 10 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.10

--      Cabletron Remote Access Connection Group
--      This group is mandatory for all platforms that have one or more
--      physical remote access connections

        ctRemNumConnections OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This object describes the number of physical remote 
                access connections on the platform."
        ::= { ctRemoteConnection 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.1

        ctRemPhysPortTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtRemPhysPortEntry
        ACCESS  not-accessible  
        STATUS  mandatory
        DESCRIPTION
                "A list of the descriptions of the physical remote access
                 ports of this platform."
        ::= { ctRemoteConnection 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2

        ctRemPhysPortEntry OBJECT-TYPE
        SYNTAX  CtRemPhysPortEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A physical port entry. It contains objects relating to a
                given physical remote access port"
        INDEX   { ctRemConnectionIndex }
        ::= { ctRemPhysPortTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1

        CtRemPhysPortEntry ::=
        SEQUENCE {
                        ctRemConnectionIndex
                        INTEGER,
                        ctRemPhysPortType
                        INTEGER,
                        ctRemPhysPortSpecificMib
                        OBJECT IDENTIFIER,
                        ctRemPhysPortProtMgrType
                        INTEGER,
                        ctRemPhysPortProtMgrIfaceNum
                        INTEGER,
                        ctRemPhysPortWanIfaceNum
                        INTEGER,
                        ctRemPhysPortProtMgrMaxIfos
                        INTEGER,
                        ctRemPhysPortProtMgrIfaceList
                        DisplayString,
                        ctRemPhysAlarmTimeOut
                        INTEGER,
                        ctRemPhysWpimType
                        INTEGER
                        }

        ctRemConnectionIndex    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A value indicating the remote connection this entry
                is located on."
        ::= { ctRemPhysPortEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.1

        ctRemPhysPortType OBJECT-TYPE
        SYNTAX  INTEGER {
                        none(1),
                        t1(2),
                        e1(3),
                        synchronous(4),
                        dds(5),
                        di(6),           -- Drop and Insert
                        hdsl(7),
                        isdnBRI(8),
                        ds30(9),
                        t1dds(10)
                                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The type of physical port that this entry describes. None
                indicates that the physical port has no connector."
        DEFVAL { none }
        ::= { ctRemPhysPortEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.2

        ctRemPhysPortSpecificMib OBJECT-TYPE
        SYNTAX  OBJECT IDENTIFIER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This object identifies an instance of the
                index object in the first group of objects in the
                MIB specific to the physical port."
        ::= { ctRemPhysPortEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.3

        ctRemPhysPortProtMgrType OBJECT-TYPE
        SYNTAX  INTEGER {
                        none(1),
                        pppNailedUp(2),
                        isdnPriPpp(3),
                        isdnBriPpp(4),
                        frameRelayPvcRtr(5),
                        frameRelayPvcSw(6),
                        hdlc(7)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies an instance of the type
                of Protocol Manager residing on this physical
                port.  Before a physical port may be used, the type
                of manager must be designated.  For example, if the
                physical port was going to be used as an ISDN PRI
                interface, with dial up PPP links, then the manager
                type would be set to (4), ISDN-PRI-PPP."
        DEFVAL { none }
        ::= { ctRemPhysPortEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.4

        ctRemPhysPortProtMgrIfaceNum OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies the interface number that
                will be assigned to the Protocol Managers IFO"
        ::= { ctRemPhysPortEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.5

        ctRemPhysPortWanIfaceNum OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This object identifies the interface number that
                will be assigned to the Wanio's IFO"
        ::= { ctRemPhysPortEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.6

        ctRemPhysPortProtMgrMaxIfos OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION   
                "This object identifies the maximum number of IFO's
                that can be created on this physical interface."
        ::= { ctRemPhysPortEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.7

        ctRemPhysPortProtMgrIfaceList OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This object identifies a list of interfaces that
                will be assigned to this Protocol Managers data IFO's"
        ::= { ctRemPhysPortEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.8

        ctRemPhysAlarmTimeOut OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Whenever the physical port is configured for nailed-up 
                PPP this object specifies the time the physical port 
                must remain in a failed state as a condition to begin 
                the backup procedure. The backup procedure is begun for 
                any active interface(s) that were connected over the
                failed physical port and which have been configured for 
                backup."
        ::= { ctRemPhysPortEntry 9 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.9

        ctRemPhysWpimType OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This Mib object determines the Mode of operation that
                the T1/DDS Wpim module will function as. Setting a value
                of 1 will set the mode to DDS, setting a value of 2 will
                set the mode to T1."
        DEFVAL { 2 }
        ::= { ctRemPhysPortEntry 10 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.10

        ctRemInterfaceTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtRemInterfaceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The interface table for Cabletron remote interfaces.
                It is a list of items that are pertinant to the interfaces
                that are part of remote physical ports. The number of 
                entries is dependent upon the total number of remote 
                interfaces configured."
        ::= { ctRemoteConnection 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3

        ctRemInterfaceEntry OBJECT-TYPE
        SYNTAX  CtRemInterfaceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A remote interface entry. It
                contains objects relating to an interface that is defined
                for remote Cabletron products."
        INDEX   { ctRemIntEntIfIndex }
        ::= { ctRemInterfaceTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1

        CtRemInterfaceEntry  ::=
        SEQUENCE {
                        ctRemIntEntIfIndex
                        INTEGER,
                        ctRemIntEntCompression
                        INTEGER,
                        ctRemIntEntCompRatio
                        DisplayString,
                        ctRemIntEntCompStatus
                        INTEGER,
                        ctRemIntEntMTU
                        INTEGER,
                        ctRemIntEntCongestion
                        INTEGER,
                        ctRemIntEntMaxProfiles
                        INTEGER,
                        ctRemIntEntTxIdleTimeout
                        INTEGER,
                        ctRemIntEntRxIdleTimeout
                        INTEGER,
                        ctRemIntEntCircuitName
                        DisplayString,
                        ctRemIntEntEncryption
                        INTEGER,
                        ctRemIntEntEncryptStatus
                        INTEGER
                        }

        ctRemIntEntIfIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctRemInterfaceEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.1

        ctRemIntEntCompression OBJECT-TYPE
        SYNTAX  INTEGER {
                                on(1),
                                off(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This flag will indicate whether compression should take
                place on this interface."
        DEFVAL { off }
        ::= { ctRemInterfaceEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.2

        ctRemIntEntCompRatio OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This string indicates the current compression ratio
                on this interface."
        ::= { ctRemInterfaceEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.3

        ctRemIntEntCompStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                                on(1),
                                off(2)
                                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This flag will indicate whether compression has been 
                nogotiated on this interface."
        ::= { ctRemInterfaceEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.4

        ctRemIntEntMTU OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The MTU to be negotiated for this interface. This will 
                not be updated with the actual MTU, which can be found 
                in the ifTable."
        ::= { ctRemInterfaceEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.5

        ctRemIntEntCongestion OBJECT-TYPE
        SYNTAX  INTEGER { 
                                enabled(1),
                                disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies the Leaky Bucket algorithm flag for
                a Frame Relay circuit on this intertface. The option is 
                supported when this flag is enabled, and not supported 
                when this flag is disabled."
        DEFVAL { disabled }
        ::= { ctRemInterfaceEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.6

        ctRemIntEntMaxProfiles OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
        "This object specifies the maximum number of neighbor profiles.
        A neighbor profile describes a possible connection. The maximum
        should be set to account for support of PPP multilink. That is
        to say, if PPP multilink is being used then the number of profiles
        must at least accomodate the maximum possible number of additional
        more BW connections. As such, each neighbor profile would then
        describe a possible connection to the same remote end point."
        ::= { ctRemInterfaceEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.7

        ctRemIntEntTxIdleTimeout OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies the idle timeout value in which a 
                packet needs to be transmitted before the interface is 
                automatically disconnected. Allowed values are in 
                increments of five seconds including zero."
        ::= { ctRemInterfaceEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.8

        ctRemIntEntRxIdleTimeout OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies the idle timeout in which a packet
                needs to be received before the interface is automatically
                disconnected. Allowed values are in increments of five 
                seconds including zero."        
        ::= { ctRemInterfaceEntry 9 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.9

        ctRemIntEntCircuitName OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
        "This object associates a circuit name with a specific interface."
        ::= { ctRemInterfaceEntry 10 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.10

        ctRemIntEntEncryption OBJECT-TYPE
        SYNTAX  INTEGER {
                                on(1),
                                off(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This flag will indicate whether encryption should take
                place on this interface."
        DEFVAL { off }
        ::= { ctRemInterfaceEntry 11 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.11

        ctRemIntEntEncryptStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                                on(1),
                                off(2)
                                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This flag will indicate whether Encryption has been 
                nogotiated on this interface."
        ::= { ctRemInterfaceEntry 12 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.12

        ctRemPrimaryInterfaceTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtRemPrimaryInterfaceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The interface table for Cabletron remote interfaces.
                It is a list of items that are pertinant to the interfaces
                that are part of remote physical ports. The number of 
                entries is dependent upon the total number of remote 
                interfaces configured."
        ::= { ctRemoteConnection 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.4

        ctRemPrimaryInterfaceEntry OBJECT-TYPE
        SYNTAX  CtRemPrimaryInterfaceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A remote interface entry. It
                contains objects relating to an interface that is defined
                for remote Cabletron products."
        INDEX   { ctRemPriIntEntIfIndex }
        ::= { ctRemPrimaryInterfaceTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.4.1

        CtRemPrimaryInterfaceEntry  ::=
        SEQUENCE {
                        ctRemPriIntEntIfIndex
                        INTEGER,
                        ctRemPriIntEntConnectRetryInterval
                        INTEGER
                        }

        ctRemPriIntEntIfIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctRemPrimaryInterfaceEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.1

        ctRemPriIntEntConnectRetryInterval OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object specifies the interval in seconds between retries 
                for restoring the primary interface."
        DEFVAL { 30 }
        ::= { ctRemPrimaryInterfaceEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.2

        ctRemBackupInterfaceTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtRemBackupInterfaceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The interface table for Cabletron remote interfaces.
                It is a list of items that are pertinant to the interfaces
                that are part of remote physical ports. The number of 
                entries is dependent upon the total number of remote 
                interfaces configured."
        ::= { ctRemoteConnection 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5

        ctRemBackupInterfaceEntry OBJECT-TYPE
        SYNTAX  CtRemBackupInterfaceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A remote interface entry. It
                contains objects relating to an interface that is defined
                for remote Cabletron products."
        INDEX   { ctRemIntEntBackupIfIndex }
        ::= { ctRemBackupInterfaceTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1

        CtRemBackupInterfaceEntry  ::=
        SEQUENCE {
                        ctRemIntEntBackupIfIndex
                        INTEGER,
                        ctRemIntEntBackupIfNum
                        INTEGER,
                        ctRemIntEntBackupIfInUseCnt
                        INTEGER,
                        ctRemIntEntBackupIfTimeToConnect
                        INTEGER,
                        ctRemIntEntBackupIfTimeToDisconnect
                        INTEGER,
                        ctRemIntEntBackupIfOverride
                        INTEGER,
                        ctRemIntEntBackupConnectRetries
                        INTEGER,
                        ctRemIntEntBackupConnectRetryInterval
                        INTEGER
                        }

        ctRemIntEntBackupIfIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctRemBackupInterfaceEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.1

        ctRemIntEntBackupIfNum OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies which ifIndex will backup this
                interface in the event of a communications failure."
        ::= { ctRemBackupInterfaceEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.2

        ctRemIntEntBackupIfInUseCnt OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This object identifies how many other interfaces this
                interface will backup."
        ::= { ctRemBackupInterfaceEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.3

        ctRemIntEntBackupIfTimeToConnect OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies how long to wait in seconds before
                attempting to switchover to the backup interface. Allowed
                values are in increments of five seconds including zero."
        ::= { ctRemBackupInterfaceEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.4

        ctRemIntEntBackupIfTimeToDisconnect OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies how long to wait in seconds before
                attempting to switchover to the primary interface. Allowed
                values are in increments of five seconds including zero."
        ::= { ctRemBackupInterfaceEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.5

        ctRemIntEntBackupIfOverride OBJECT-TYPE
        SYNTAX  INTEGER {
                                enabled(1),
                                disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies if the interface will switch back to
                the primary link after it has become active again. A force
                condition will not allow the interface to switch back."
        DEFVAL { disabled }
        ::= { ctRemBackupInterfaceEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.6

        ctRemIntEntBackupConnectRetries OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object specifies the number of tries to bring-up the 
                backup interface before giving up."
        ::= { ctRemBackupInterfaceEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.7

        ctRemIntEntBackupConnectRetryInterval OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object specifies the interval in seconds between retries 
                for bringing up backup interface before giving up."
        ::= { ctRemBackupInterfaceEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.8

        ctRemExtPhysPortTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtRemExtPhysPortEntry
        ACCESS  not-accessible  
        STATUS  mandatory
        DESCRIPTION
                "A list of the descriptions of the physical remote access
                 ports of this platform."
        ::= { ctRemoteConnection 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6

        ctRemExtPhysPortEntry OBJECT-TYPE
        SYNTAX  CtRemExtPhysPortEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A physical port entry. It contains objects relating to a
                given physical remote access port"
        INDEX   { ctRemExtConnectionIndex }
        ::= { ctRemExtPhysPortTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1

        CtRemExtPhysPortEntry ::=
        SEQUENCE {
                        ctRemExtConnectionIndex
                        INTEGER,
                        ctRemExtProtMgrIndex
                        INTEGER,
                        ctRemExtPhysPortProtMgrType
                        INTEGER,
                        ctRemExtPhysPortProtMgrEnable
                        INTEGER,
                        ctRemExtPhysPortProtMgrIfaceNum
                        INTEGER,
                        ctRemExtPhysPortProtMgrMaxIfos
                        INTEGER,
                        ctRemExtPhysPortProtMgrIfaceList
                        DisplayString,
                        ctRemExtPhysPortProtMgrChannelList
                        DisplayString
                        }

        ctRemExtConnectionIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A value indicating the remote connection this entry
                is located on."
        ::= { ctRemExtPhysPortEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.1

        ctRemExtProtMgrIndex    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A value indicating the protMgr number for this entry."
        ::= { ctRemExtPhysPortEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.2

        ctRemExtPhysPortProtMgrType OBJECT-TYPE
        SYNTAX  INTEGER {
                        none(1),
                        pppNailedUp(2),
                        isdnPriPpp(3),
                        isdnBriPpp(4),
                        frameRelayPvcRtr(5),
                        frameRelayPvcSw(6),
                        hdlc(7)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies an instance of the type
                of Protocol Manager residing on this physical
                port.  Before a physical port may be used, the type
                of manager must be designated.  For example, if the
                physical port was going to be used as an ISDN PRI
                interface, with dial up PPP links, then the manager
                type would be set to (4), ISDN-PRI-PPP."
        DEFVAL { none }
        ::= { ctRemExtPhysPortEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.3

        ctRemExtPhysPortProtMgrEnable OBJECT-TYPE
        SYNTAX  INTEGER {
                        enabled(1),
                        disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies an instance of the the
                enable flag of Protocol Manager residing on this
                physical port."
        DEFVAL { disabled }
        ::= { ctRemExtPhysPortEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.4

        ctRemExtPhysPortProtMgrIfaceNum OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object identifies the interface number that
                will be assigned to the Protocol Managers IFO"
        ::= { ctRemExtPhysPortEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.5

        ctRemExtPhysPortProtMgrMaxIfos OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION   
                "This object identifies the maximum number of IFO's
                that can be created on this physical interface."
        ::= { ctRemExtPhysPortEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.6

        ctRemExtPhysPortProtMgrIfaceList OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This object identifies a list of interfaces that
                will be assigned to this Protocol Managers data IFO's"
        ::= { ctRemExtPhysPortEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.7

        ctRemExtPhysPortProtMgrChannelList OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This object identifies a list of channles/timeslots
                that will be assigned to this Protocol Managers data IFO's"
        ::= { ctRemExtPhysPortEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.8


-- Cabletron Ds1 Extensions Group
-- This group is required for any platforms that have a t1 or e1 physical 
-- port.

        ctDs1ExtensionsTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtDs1ExtensionsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table is an extension to the standard ds1 configuration
                table. It is a list of items that are pertinant to ds1 ports
                on a platform. There is one entry per ds1 physical port on
                the platform."
        ::= { ctDs1Ext 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1

        ctDs1ExtensionsEntry OBJECT-TYPE
        SYNTAX  CtDs1ExtensionsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A ds1 extensions entry containing objects relating to
                the particular ds1 physical port."
        INDEX   { ctDs1ExtensionsEntryIndex }
        ::= { ctDs1ExtensionsTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1

        CtDs1ExtensionsEntry ::=
        SEQUENCE {
                        ctDs1ExtensionsEntryIndex
                        INTEGER,
                        ctDs1ExtensionsNumInterfaces
                        INTEGER,
                        ctDs1ExtensionsToggleFracTable
                        INTEGER,
                        ctDs1ExtensionsLineBuildOut
                        INTEGER,
                        ctDs1ExtensionsCFADuration
                        INTEGER,
                        ctDs1ExtensionsDIEnable
                        INTEGER,
                        ctDs1ExtensionsTotalValidIntervals
                        Counter,
                        wanDs1ExtensionsBertTestMode
                        INTEGER,
                        wanDs1ExtensionsBertRun
                        INTEGER,
                        wanDs1ExtensionsBertCurrentResults
                        INTEGER,
                        wanDs1ExtensionsBertCumulativeResults
                        INTEGER,
                        wanDs1ExtensionsBertPeakResults
                        INTEGER,
                        wanDs1ExtensionsBertAverageResult
                        INTEGER,
                        wanDs1ExtensionsBertTestPattern
                        INTEGER,
                        wanDs1ExtensionsBertSamplePeriod
                        INTEGER,
                        wanDs1ExtensionsBertNumPeriods
                        Counter,
                        wanDs1ExtensionsBertTestTraps
                        INTEGER,
                        wanDs1ExtensionsBertDataStatus
                        INTEGER
                }

        ctDs1ExtensionsEntryIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A unique value for each ds1 physical port on the platform."
        ::= { ctDs1ExtensionsEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.1

        ctDs1ExtensionsNumInterfaces OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of interfaces on this physical port. This
                number inidicates the number of entries this physical port
                uses in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctDs1ExtensionsEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.2

        ctDs1ExtensionsToggleFracTable OBJECT-TYPE
        SYNTAX  INTEGER {
                        update-table(1),
                        display-new(2),
                        display-old(3),
                        restore-old(4)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Setting this object to 1 will cause the Ds1 Fractional 
                Table to be updated with the new values, as entered.

                Setting this object to 2, will cause the Ds1 Fractional 
                Table to view as the table being entered.

                Setting this object to 3, will cause the Ds1 Fractional 
                Table to be the table that is currently in use, regardless 
                of any changes being entered.

                Setting this object to 4, will cause any changes that have
                been made to the Ds1 Fractional Table since the last
                update-table to be deleted.

                For physical ports that are of type synch, or for Ds1 ports
                that do not support the Ds1 Fractional Table, this object will
                have no affect, and will always return a 1."
        REFERENCE
                "rfc-1406"
        ::= { ctDs1ExtensionsEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.3

        ctDs1ExtensionsLineBuildOut OBJECT-TYPE
        SYNTAX  INTEGER {
                        unknown(1),
                        zero(2),
                        minus-7point5(3),
                        minus-15(4),
                        a133to266feet(5),
                        a266to399feet(6),
                        a399to533feet(7),
                        a533to655feet(8)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The line build out setting for this ds1 physical port.
                Unknown indicates that the setting is neither readable or
                writable."
        DEFVAL { zero }
        ::= { ctDs1ExtensionsEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.4

        ctDs1ExtensionsCFADuration OBJECT-TYPE
        SYNTAX  INTEGER (1..15)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The length of time (in seconds), that the ds1 port will
                remain in the Carrier Failure Alarm state after the
                alarm condition has cleared. For those Ds1 ports not 
                supporting Carrier Failure Alarm duration, this object
                always returns 1, and setting the object has no effect."
        ::= { ctDs1ExtensionsEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.5

        ctDs1ExtensionsDIEnable OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables or disables Drop and Insert functionality on a
                D/I WPIM.  If enabled, all zero assigned timeslots will 
                designate D/I interface channels, if disabled all zero 
                channels will designate dummy channels as on a T1 or E1."
        DEFVAL { enable }
        ::= { ctDs1ExtensionsEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.6

        ctDs1ExtensionsTotalValidIntervals OBJECT-TYPE
        SYNTAX  Counter 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of  previous  intervals  for  which
                valid data was collected for the DS1 mib, which
                is currently RFC1406.  This counter is similar to
                RFC1406 dsx1ValidIntervals except that the count
                represents the total number of complete 15 minute
                intervals since the ds1 interface has been online,
                and does not stop at the 24 hour period."
        ::= { ctDs1ExtensionsEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.7

    wanDs1ExtensionsBertTestMode        OBJECT-TYPE
        SYNTAX  INTEGER{
        none(1),
        internal(2),
        manual(3)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object is used to request that a type of
                process be in control of the testing function.
                This is used to differentiate between automated test 
                procedures and those manually controlled by a user.  
                When read, this object reflects which type of process 
                is actually in control of the testing function.  The 
                implementation is free to prioritize or deny requests
                in a proprietary manner."
        ::= { ctDs1ExtensionsEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.8

    wanDs1ExtensionsBertRun   OBJECT-TYPE
        SYNTAX  INTEGER {
                disabled(1),
                enabled(2)
                }
        ACCESS      read-write
        STATUS      mandatory
        DESCRIPTION
                "Controls the sending of test data over this physical 
                port.  The data is a pattern described by 
                wanDs1ExtensionsBertTestPattern." 
        ::= { ctDs1ExtensionsEntry 9 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.9

    wanDs1ExtensionsBertCurrentResults   OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS      read-only
        STATUS      mandatory
        DESCRIPTION
                "Indicates the results of the testing for the
                last completed sampling period.  A non-negative
                number is the error rate in bits per million bits."
        ::= { ctDs1ExtensionsEntry 10 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.10

    wanDs1ExtensionsBertCumulativeResults   OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS      read-only
        STATUS      mandatory
        DESCRIPTION
                "Indicates the total number of errors since the
                testing was enabled.  It is not a rate."
        ::= { ctDs1ExtensionsEntry 11 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.11

    wanDs1ExtensionsBertPeakResults   OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS      read-only
        STATUS      mandatory
        DESCRIPTION
                "Indicates the highest value of 
                wanDs1ExtensionsBertCurrentResults since the testing 
                was enabled.  A non-negative number is the error rate 
                in bits per million bits." 
        ::= { ctDs1ExtensionsEntry 12 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.12

    wanDs1ExtensionsBertAverageResult   OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS      read-only
        STATUS      mandatory
        DESCRIPTION
                "Indicates the average value of 
                wanDs1ExtensionsBertCurrentResults since the testing 
                was enabled.  A non-negative number is the error rate 
                in bits per million bits." 
        ::= { ctDs1ExtensionsEntry 13 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.13

    wanDs1ExtensionsBertTestPattern     OBJECT-TYPE
        SYNTAX  INTEGER {
                patternOther(1),
                pattern1s(2),
                pattern63(3),
                pattern511(4),
                pattern2047(5),
                pattern3in24(6),
                patternQRSS(7)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object is used to specify the pattern of the 
                test data."
        ::= { ctDs1ExtensionsEntry 14 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.14

    wanDs1ExtensionsBertSamplePeriod    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object is the duration of time in seconds at
                which the current test results will be periodically
                written to wanDs1ExtensionsBertCurrentResults.  The 
                range is 1 to 3600, with a default value of 10."
        ::= { ctDs1ExtensionsEntry 15 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.15

    wanDs1ExtensionsBertNumPeriods   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS      read-only
        STATUS      mandatory
        DESCRIPTION
                " The number of sampling periods that have elapsed
                during the current test run."
        ::= { ctDs1ExtensionsEntry 16 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.16

    wanDs1ExtensionsBertTestTraps       OBJECT-TYPE
        SYNTAX  INTEGER {
                disabled(1),
                enabled(2)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object is used to enable or disable the sending
                of a trap at the conclusion of the measurement period.
                The trap will contain the information described by
                ctDs1BertCurrentResults.  The default value is disabled."
        ::= { ctDs1ExtensionsEntry 17 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.17

    wanDs1ExtensionsBertDataStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                idle(1),
                waitingForLink(2),
                waitingForLoopback(3),
                running(4)
                }
        ACCESS      read-only
        STATUS      mandatory
        DESCRIPTION
                "This object provides the operating status of the
                transmission of test data packets."
        ::= { ctDs1ExtensionsEntry 18 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.18

        ctDs1WanDriverTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtDs1WanDriverEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table is an extension to the standard ds1 
                configuration table. It is a list of items that are 
                pertinant to the hdlc driver on a platform. There is 
                one entry per ds1 physical port on the platform."
        ::= { ctDs1Ext 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.2

        ctDs1WanDriverEntry OBJECT-TYPE
        SYNTAX  CtDs1WanDriverEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A ds1 wan driver entry containing objects relating to
                the particular ds1 physical port pertaining to a specific
                channel on the wan driver chip."
        INDEX   { ctDs1WanDriverEntryIndex, ctDs1WanDriverChannelIndex }
        ::= { ctDs1WanDriverTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.2.1

        CtDs1WanDriverEntry ::=
        SEQUENCE        {
                        ctDs1WanDriverEntryIndex
                        INTEGER,
                        ctDs1WanDriverChannelIndex
                        INTEGER,
                        ctDs1WanDriverLineCode
                        INTEGER,
                        ctDs1WanDriverCRCBits
                        INTEGER
                                }

        ctDs1WanDriverEntryIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A unique value for each ds1 physical port on the platform."
        ::= { ctDs1WanDriverEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.1

        ctDs1WanDriverChannelIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A unique value for each channel on a wan driver on the 
                platform."
        ::= { ctDs1WanDriverEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.2

        ctDs1WanDriverLineCode OBJECT-TYPE
        SYNTAX  INTEGER {
                        none (1),
                        jBZS (2),
                        invHDLC (3)
                                        }

        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object controls the individual channels line coding 
                on a wan driver device on the platform."
        DEFVAL { none }
        ::= { ctDs1WanDriverEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.3

        ctDs1WanDriverCRCBits OBJECT-TYPE
        SYNTAX  INTEGER {
                        crc16 (1),
                        crc32 (2)
                                        }

        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object controls the individual channels CRC bits 
                generation on a wan driver device on the platform."
        DEFVAL { crc16 }
        ::= { ctDs1WanDriverEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.4


-- Cabletron Rs232 Extensions Group
-- This group is only required if any physical port on the system can be
-- classified as rs232-like

        ctRs232ExtensionsTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtRs232ExtensionsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table is an extension to the standard rs232-like mib.
                It is a list of items that are pertinant to rs232-like ports
                on a platform. There is one entry per synchronous physical
                port on the platform."
        REFERENCE
                "rfc-1317"
        ::= { ctRs232Ext 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.3.1

        ctRs232ExtensionsEntry OBJECT-TYPE
        SYNTAX  CtRs232ExtensionsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A rs232-like extensions entry containing objects relating 
                to the particular rs232-like physical port."
        INDEX   { ctRs232ExtensionsEntryIndex }
        ::= { ctRs232ExtensionsTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.3.1.1

        CtRs232ExtensionsEntry ::=
        SEQUENCE        {
                        ctRs232ExtensionsEntryIndex
                        INTEGER,
                        ctRs232ExtensionsCTSEnable
                        INTEGER,
                        ctRs232ExtensionsDSREnable
                        INTEGER,
                        ctRs232ExtensionsRTSEnable
                        INTEGER,
                        ctRs232ExtensionsDTREnable
                        INTEGER
                                }

        ctRs232ExtensionsEntryIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A unique value for each rs232-like physical port on
                the platform."
        ::= { ctRs232ExtensionsEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.1

        ctRs232ExtensionsCTSEnable OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object indicates  whether the platform should 
                generate CTS. When disabled the platform will not 
                generate CTS, when enabled, the platform will generate 
                CTS.  The actual state of the CTS line is available 
                in the rs-232 like mib."
        REFERENCE
                "rfc-1317"
        DEFVAL { disable }
        ::= { ctRs232ExtensionsEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.2

        ctRs232ExtensionsDSREnable OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object indicates whether the platform should 
                generate DSR. When disabled the platform will not 
                generate DSR, when enabled, the platform will generate 
                DSR.  The actual state of the DSR line is available 
                in the rs-232 like mib."
        REFERENCE
                "rfc-1317 "
        DEFVAL { disable }
        ::= { ctRs232ExtensionsEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.3

        ctRs232ExtensionsRTSEnable OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object indicates  whether the platform should 
                generate RTS. When disabled the platform will not 
                generate RTS, when enabled, the platform will generate 
                RTS.  The actual state of the RTS line is available 
                in the rs-232 like mib."
        REFERENCE
                "rfc-1317"
        DEFVAL { disable }
        ::= { ctRs232ExtensionsEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.4

        ctRs232ExtensionsDTREnable OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object indicates whether the platform should 
                generate DTR. When disabled the platform will not 
                generate DSR, when enabled, the platform will generate 
                DTR.  The actual state of the DTR line is available 
                in the rs-232 like mib."
        REFERENCE
                "rfc-1317 "
        DEFVAL { disable }
        ::= { ctRs232ExtensionsEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.5

--  ctFrDcp Group
--  This group is mandatory to support Data Compression Protocol 
--  (DCP following FRF.9) for per virtual circuit basis

        frDcpCircuitTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF FrDcpCircuitEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A table containing data compression information about 
                specific Data Link Connection Identifiers and 
                corresponding virtual circuit. This information is used 
                to support the frCircuitTable following RFC-1315."
        ::= { ctFrDcp 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.4.1

        frDcpCircuitEntry OBJECT-TYPE
        SYNTAX  FrDcpCircuitEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The data compression information regarding a single Data 
                Link Connection Identifier."
        INDEX { frDcpCircuitIfIndex, frDcpCircuitDlci }
        ::= { frDcpCircuitTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.4.1.1

    FrDcpCircuitEntry ::=
        SEQUENCE        {
                        frDcpCircuitIfIndex
                        Index,
                        frDcpCircuitDlci
                        DLCI,
                        frDcpCircuitEnable
                        INTEGER,
                        frDcpCircuitStatus
                        INTEGER,
                        frDcpCircuitRatio
                        OCTET STRING
                                }

        frDcpCircuitIfIndex OBJECT-TYPE
        SYNTAX  Index
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex value of ifEntry that this DCP virtual 
                circuit object is layered onto."
        ::= { frDcpCircuitEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.1

        frDcpCircuitDlci OBJECT-TYPE
        SYNTAX  DLCI
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Data Link Connection Identifier for this DCP virtual 
                circuit object."
        REFERENCE
                "Draft American National Standard T1.618-1991, 
                Section 3.3.6"
        ::= { frDcpCircuitEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.2

        frDcpCircuitEnable OBJECT-TYPE
        SYNTAX  INTEGER {
                        on (1),
                        off (2)          -- default
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether data compression should take place on
                this particular end side virtual circuit."
        DEFVAL { off }
        ::= { frDcpCircuitEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.3

        frDcpCircuitStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                        on (1),
                        off (2)
                                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "On indicates that the compression has been successfully
                negotiated and is operating. Off indicates that the
                compression negotiation has failed and compression is not
                operating at this time, or compression has been terminated
                by either peer."
        ::= { frDcpCircuitEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.4

        frDcpCircuitRatio OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE (5))
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The ratio of uncompressed to compressed transmitted data. 
                If the data compression status is off, 1:1 will be 
                displayed."
        ::= { frDcpCircuitEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.5

-- Cabletron DDS Extensions Group
-- This group is required for any platforms that have a dds physical port.

        ctDDSConfigTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtDDSConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The DDS Configuration Table"
        ::= { ctDDSExt 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1

        ctDDSConfigEntry OBJECT-TYPE
        SYNTAX  CtDDSConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "An Entry in the DDS Configuration Table"
        INDEX   { ctDDSLineIndex }
        ::= { ctDDSConfigTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1

        CtDDSConfigEntry ::=
        SEQUENCE        {
                        ctDDSLineIndex
                        INTEGER,
                        ctDDSIfIndex
                        INTEGER,
                        ctDDSLineMode
                        INTEGER,
                        ctDDSLineCoding
                        INTEGER,
                        ctDDSLoopbackConfig
                        INTEGER,
                        ctDDSLineStatus
                        INTEGER,
                        ctDDSTxClockSource
                        INTEGER,
                        ctDDSPortInSpeed
                        INTEGER,
                        ctDDSPortOutSpeed
                        INTEGER
                        }

        ctDDSLineIndex OBJECT-TYPE
        SYNTAX  INTEGER (1..'7fffffff'h)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A unique value for each ds1 physical port on the 
                platform."
        ::= { ctDDSConfigEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.1

        ctDDSIfIndex OBJECT-TYPE
        SYNTAX  INTEGER (1..'7fffffff'h)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Index associated with this dds physical port"
        ::= { ctDDSConfigEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.2

        ctDDSLineMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        ddsPri (1),
                        ddsSc (2),
                        ddsCc (3)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "DDS-PRI is full duplex 56k link, No framing in loop data
                so loop speed is also 56k. Data stream:
                        --d1 d2 d3 d4 d5 d6 d7--        
                DDS-SC is also full duplex 56k link, requires framing bits 
                to distinguish between primary and secondary channels.
                        --d1 d2 d3 d4 d5 d6 d7 F C/S--
                where F is framing bit and C/S for secondary channel as 
                well as used for control bit.
                With these two extra bits the loop speed is increased to 
                72k.  primary channel rate is 56k.

                DDS-CC is full duplex 64k link. Does not require framing 
                bit but uses a same format as SC, nineth bit position is 
                lumped with primary channel and not used for control.
                Loop speed is 72k, Primary channel rate is 64k.
                        --d1 d2 d3 d4 d5 d6 d7 F d8--"
        ::= { ctDDSConfigEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3

        ctDDSLineCoding OBJECT-TYPE
        SYNTAX  INTEGER {
                        ddsNone (1),
                        ddsJBZS (2),
                        otherLineCode (3)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This object describes the variety of Zero Code 
                suppression on this interface.  JBZS refers to Jammed 
                Bit Zero suppresion, which forces a 1 bit every 8 bit 
                periods. None refers to a mode in which some other 
                means is used to insure pulse density requirements."
        ::= { ctDDSConfigEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.4

        ctDDSLoopbackConfig OBJECT-TYPE
        SYNTAX  INTEGER {
                        ddsNoLoop (1),
                        ddsLocalLoop (2),
                        ddsLineLoop (3),
                        ddsOtherLoop (4)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This variable represents the loopback configuration 
                of the DDS interface.  ddsNoLoop means the interface 
                is not in loopback state, ddsLocalLoop means the signal 
                is transmitted and looped back to the same interface, 
                ddsLineLoop means the received signal at this interface 
                does not go through the device but is looped back out, 
                and ddsOtherLoop represents a loop not defined here."
        ::= { ctDDSConfigEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.5

        ctDDSLineStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                        ddsNoAlarm (1),
                        ddsLossOfSignal (2),
                        ddsOutOfService (3),
                        ddsOutOfFrame (4)
                                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This variable describes the current operational status of
                DDS line."
        ::= { ctDDSConfigEntry 6 }      
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.6

        ctDDSTxClockSource OBJECT-TYPE
        SYNTAX  INTEGER {
                        ddsLoopTiming (1),
                        ddsLocalTiming (2),
                        ddsThroughTiming (3)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The source of Transmit clock.
                'ddsLoopTiming' indicates that the recovered receive clock
                is used as transmit clock.

                'ddsLocalTiming' indicates that a local clock source is 
                used.

                'ddsThroughTiming' indicates that recovered receive clock 
                from another interface is used as transmit clock."
        ::= { ctDDSConfigEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.7

        ctDDSPortInSpeed OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                " This variable describes the current operational
                receive speed of DDS line.  It is a read only value
                based entirely on DDS type (CC or PRI)."
        ::= { ctDDSConfigEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.8
   
        ctDDSPortOutSpeed OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This variable describes the current operational
                transmit speed of DDS line.  It is a read only value
                based entirely on DDS type CC or PRI"
        ::= { ctDDSConfigEntry 9 }
--          1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.9


--
-- Ctron PPP Counters Group.

-- The following object reflect the values of the
-- counters used for each PPP link.
-- ctPppCountersIfIndex
-- ctPppCountersMaxTerminate
-- ctPppCountersMaxConfigure
-- ctPppCountersMaxFailure
-- ctPppCountersRestartTimer

        ctPppCountersTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtPppCountersEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Table containing the parameters for the local
                PPP entity related to the counters and timers."
        ::= { ctPPPExt 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.1

        ctPppCountersEntry OBJECT-TYPE
        SYNTAX  CtPppCountersEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "PPP counter/timer information for a particular
                PPP link."
        INDEX { ctPppCountersIfIndex }
        ::= { ctPppCountersTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.1.1
        
        CtPppCountersEntry ::= SEQUENCE {
                        ctPppCountersIfIndex
                        INTEGER,
                        ctPppCountersMaxTerminate
                        INTEGER,
                        ctPppCountersMaxConfigure               
                        INTEGER,
                        ctPppCountersMaxFailure
                        INTEGER,
                        ctPppCountersRestartTimer
                        INTEGER
                                }

        ctPppCountersIfIndex OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctPppCountersEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.1

        ctPppCountersMaxTerminate OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "MaxTerminate indicates the number of Terminate-
                Request packets sent without receiving a Terminate-Ack
                before assuming that the peer in unable to respond."
        ::= { ctPppCountersEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.2

        ctPppCountersMaxConfigure OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "MaxConfigure indicates the number of Configure-
                Request packets sent without receiving a Configure-Ack,
                Configre-Nak or Configure-Reject before assuming that 
                the peer in unable to respond."
        ::= { ctPppCountersEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.3

        ctPppCountersMaxFailure OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "MaxFailure indicates the number of Configure-Nak
                packets sent without sending a Configure-Ack
                before assuming that the configuration is not
                converging.  Any further Configure-Reject packets
                for peer requested options are converted to 
                Configure-Reject packets, and locally desires options
                are no longer appended."
        ::= { ctPppCountersEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.4

        ctPppCountersRestartTimer OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The Restart timer is used to time transmissions
                of Configure-Request and Terminate-Request packets.
                Expiration of the Restart-Timer causes a Timeout
                event, and retransmission of the corresponding
                Configure-Request or Terminate-Request packet."
        ::= { ctPppCountersEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.5

--
-- Ctron PPP LCP Extentions Group.

-- The following object reflect the values of the
-- LCP parameters not included in RFCs for this PPP link.
--              
--              ctPppLcpExtIfIndex
--              ctPppLcpExtAuthenticationProt
--              ctPppLcpExtQualityProt  
--              ctPppLcpExtPFC          
--              ctPppLcpExtACFC 
--              ctPppLcpExtSelfDescribePadding
--              ctPppLcpExtCallback             
--              ctPppLcpExtCompoundFrames       
--              ctPppLcpExtMru
--              ctPppLcpExtAccm
--              ctPppLcpExtEchoRequest
--              ctPppLcpExtReplyCounter
--              ctPppLcpExtMpCapable

        ctPppLcpExtTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtPppLcpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Table containing the parameters for the local
                PPP entity related to the counters and timers."
        ::= { ctPPPExt 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2

        ctPppLcpExtEntry OBJECT-TYPE
        SYNTAX  CtPppLcpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "PPP LCP configurationinformation for a particular
                PPP link."
        INDEX { ctPppLcpExtIfIndex }
        ::= { ctPppLcpExtTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1
        
        CtPppLcpExtEntry ::= SEQUENCE {
                                        ctPppLcpExtIfIndex
                                        INTEGER,
                                        ctPppLcpExtAuthenticationProt
                                        INTEGER,
                                        ctPppLcpExtQualityProt  
                                        INTEGER,
                                        ctPppLcpExtPFC          
                                        INTEGER,
                                        ctPppLcpExtACFC 
                                        INTEGER,
                                        ctPppLcpExtSelfDescribePadding
                                        INTEGER,
                                        ctPppLcpExtCallback             
                                        INTEGER,
                                        ctPppLcpExtCompoundFrames       
                                        INTEGER,
                                        ctPppLcpExtMru
                                        INTEGER,
                                        ctPppLcpExtAccm
                                        INTEGER,
                                        ctPppLcpExtEchoRequest
                                        INTEGER,
                                        ctPppLcpExtReplyCounter
                                        INTEGER,
                                        ctPppLcpExtMpCapable
                                        INTEGER
                                        }

        ctPppLcpExtIfIndex OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctPppLcpExtEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.1

        ctPppLcpExtAuthenticationProt OBJECT-TYPE
        SYNTAX  INTEGER { 
                                none(1), 
                                pap(2), 
                                chap(3)
                                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Enables a particular authentication protocol on this
                PPP link(now modified for read-only."
        ::= { ctPppLcpExtEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.2

        ctPppLcpExtQualityProt OBJECT-TYPE
        SYNTAX  INTEGER { 
                                none(1), 
                                lqr(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables a particular link-quality protocol on this
                PPP link."
        ::= { ctPppLcpExtEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.3

        ctPppLcpExtPFC OBJECT-TYPE
        SYNTAX  INTEGER { 
                                enabled(1), 
                                disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables protocol field compression on this PPP link."
        ::= { ctPppLcpExtEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.4

        ctPppLcpExtACFC OBJECT-TYPE
        SYNTAX  INTEGER { 
                                enabled(1), 
                                disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables address and control field compression on this PPP 
                link."
        ::= { ctPppLcpExtEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.5

        ctPppLcpExtSelfDescribePadding OBJECT-TYPE
        SYNTAX  INTEGER(1..256)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This Configuration Option provides a method for an
                implementation to indicate to the peer that it
                understands self-describing pads when padding is added
                at the end of the PPP Information field."
        ::= { ctPppLcpExtEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.6

        ctPppLcpExtCallback OBJECT-TYPE
        SYNTAX  INTEGER(1..6)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This Configuration Option provides a method for an
                implementation to request a dial-up peer to call back."
        ::= { ctPppLcpExtEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.7

        ctPppLcpExtCompoundFrames OBJECT-TYPE
        SYNTAX  INTEGER { 
                                enabled(1), 
                                disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This Configuration Option provides a method for an
                implementation to send multiple PPP encapsulated packets
                within the same frame."
        ::= { ctPppLcpExtEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.8

        ctPppLcpExtMru OBJECT-TYPE
        SYNTAX  INTEGER { 
                                enabled(1), 
                                disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables and disables Mru status."
        ::= { ctPppLcpExtEntry 9 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.9

        ctPppLcpExtAccm OBJECT-TYPE
        SYNTAX  INTEGER { 
                                enabled(1), 
                                disabled(2)
                                        }
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
                "Enables and disables Accm status."
        ::= { ctPppLcpExtEntry 10 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.10

        ctPppLcpExtEchoRequest  OBJECT-TYPE
        SYNTAX      INTEGER (0..2147483647) 
        ACCESS      read-write
        STATUS      mandatory
        DESCRIPTION
        "A zero indicated no Echo Request and any other value provides
        an interval to send Echo-Requests to the Peer.
        The Echo-Request provides a Data Link Layer loopback mechanism
        for use in exercising both directions of the link.  This 
        is useful in debugging, link quality determination.  LCP
        MUST be in the OPENED state for an Echo-Request to occur."
        
        ::= { ctPppLcpExtEntry 11 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.11

        ctPppLcpExtReplyCounter OBJECT-TYPE
        SYNTAX      INTEGER (0..2147483647)
        ACCESS      read-only
        STATUS      mandatory
        DESCRIPTION
        "Increments a counter if the Local Device correctly
        received an Echo-Reply from the Peer.  LCP MUST be
        in the OPENED state for an Echo-Reply to occur."
        ::= { ctPppLcpExtEntry 12 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.12

        ctPppLcpExtMpCapable OBJECT-TYPE
      SYNTAX      INTEGER{ 
                        enabled(1), 
                        disabled(2) }
      ACCESS      read-write
      STATUS      mandatory
      DESCRIPTION
                "Multilink Protocol (MP) option selector. Set to a value 
                of one when MP support is desired otherwise set to a 
                value of two. The default value is two. When set to two 
                the attempt is made to negotiate MP support.  MP support 
                is symmetrical."
        ::= { ctPppLcpExtEntry 13 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.13

--
-- Ctron PPP BNCP Extentions Group.

-- The following object reflect the values of the
-- LCP parameters not included in RFCs for this PPP link.
--              pppBncpExtIfIndex     
--              pppBncpExtCrcStatus 

        ctPppBncpExtTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtPppBncpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Table containing the parameters for the local
                PPP entity related to the counters and timers."
        ::= { ctPPPExt 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.3

        ctPppBncpExtEntry OBJECT-TYPE
        SYNTAX  CtPppBncpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "PPP LCP configuration information for a particular
                PPP link."
        INDEX { ctPppBncpExtIfIndex }
        ::= { ctPppBncpExtTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.3.1
        
        CtPppBncpExtEntry ::= SEQUENCE  {
                                        ctPppBncpExtIfIndex
                                        INTEGER,
                                        ctPppBncpExtCrcStatus
                                        INTEGER
                                        }

        ctPppBncpExtIfIndex OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctPppBncpExtEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.1

        ctPppBncpExtCrcStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                                enabled(1),
                                disabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables and disables CRC status. First our platform must 
                support CRC.  If the platform does, then setting to 
                disabled will not send CRC.  The default is enabled, 
                which sends CRC."
        ::= { ctPppBncpExtEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.2

-- Ctron PPP MP Extentions Group.
-- The following object reflect the values of the
-- LCP parameters not included in RFCs for this PPP link.
--                              ctPppMpExtIfIndex
--              ctPppLcpExtMpLUT       
--              ctPppLcpExtMpHistoryTime
--              ctPppLcpExtMpMoreBW
--              ctPppLcpExtMpLessBW
--              ctPppLcpExtMpMaxChannels
--              ctPppLcpExtMpChannelsToAdd 
--              ctPppLcpExtMpChannelsToRemove    

        ctPppMpExtTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtPppMpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Table containing the parameters for the local
                PPP entity related to the counters and timers."
        ::= { ctPPPExt 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4

        ctPppMpExtEntry OBJECT-TYPE
        SYNTAX  CtPppMpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "PPP LCP configurationinformation for a particular
                PPP link."
        INDEX { ctPppMpExtIfIndex }
        ::= { ctPppMpExtTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1
        
        CtPppMpExtEntry ::= SEQUENCE    {
                                        ctPppMpExtIfIndex
                                        INTEGER,
                                        ctPppLcpExtMpLUT
                                        INTEGER,
                                        ctPppLcpExtMpHistoryTime
                                        INTEGER,
                                        ctPppLcpExtMpMoreBW
                                        INTEGER,
                                        ctPppLcpExtMpLessBW
                                        INTEGER,
                                        ctPppLcpExtMpMaxChannels
                                        INTEGER,
                                        ctPppLcpExtMpChannelsToAdd
                                        INTEGER,
                                        ctPppLcpExtMpChannelsToRemove
                                        INTEGER
                                        }

        ctPppMpExtIfIndex OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctPppMpExtEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.1

        ctPppLcpExtMpLUT OBJECT-TYPE
        SYNTAX  INTEGER (1..100)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Used to set the Line Utilization Threshold (LUT) % value 
                to compare against the linear weighted percentage by 
                which to determine when more/less bandwidth is to be 
                added/removed. Linear weighting is averaged over the 
                period of time specified by ctPppLcpExtMpHistoryTime."
        ::= { ctPppMpExtEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.2

        ctPppLcpExtMpHistoryTime OBJECT-TYPE
        SYNTAX  INTEGER (1..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Used to set the history time value in seconds for the 
                number of line utilization reading(s) desired to compute 
                the average line utilization. That is to say, it 
                specifies the window size over which to compute the
                average line utilization."
        ::= { ctPppMpExtEntry 3 } 
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.3

        ctPppLcpExtMpMoreBW OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Used to set the number of consecutive line utilization 
                average readings that must exceed ctPppLcpExtMpLUT as 
                a condition of when to increase the bandwidth if more 
                BW is permitted."
        ::= { ctPppMpExtEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.4

        ctPppLcpExtMpLessBW OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Used to set the number of consecutive line utilization 
                average readings that must fall below ctPppLcpExtMpLUT 
                as a condition of when to remove possible previously 
                added bandwidth."
        ::= { ctPppMpExtEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.5

        ctPppLcpExtMpMaxChannels OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Used to set the maxium number of channels an MP capable
                connection is allowed."
        ::= { ctPppMpExtEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.6
 
        ctPppLcpExtMpChannelsToAdd OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Used to set the number of additional channel(s) to 
                increment by whenever the need for more bandwidth is 
                determined."
        ::= { ctPppMpExtEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.7
 
        ctPppLcpExtMpChannelsToRemove OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Used to set the number of channel(s) to decrement by 
                whenever the need for possible previously added bandwidth 
                is determined to no longer be needed."
        ::= { ctPppMpExtEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.8

-- Ctron PPP ECP Extentions Group.
-- The following object reflect the values of the
-- ECP parameters not included in RFCs for this PPP link.

        ctPppEcpExtTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtPppEcpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Table containing the parameters for the local
                PPP entity related to the encrpytion control protocol."
        ::= { ctPPPExt 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.5

        ctPppEcpExtEntry OBJECT-TYPE
        SYNTAX  CtPppEcpExtEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "PPP ECP configuration information for a particular
                PPP link."
        INDEX { ctPppEcpExtIfIndex }
        ::= { ctPppEcpExtTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.5.1
        
        CtPppEcpExtEntry ::= SEQUENCE   {
                                        ctPppEcpExtIfIndex
                                        INTEGER,
                                        ctPppEcpKey
                                        DisplayString,
                                        ctPppEcpIV
                                        DisplayString
                                        }

        ctPppEcpExtIfIndex OBJECT-TYPE
        SYNTAX  INTEGER(1..1024)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctPppEcpExtEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.1

        ctPppEcpKey OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(14))
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "A 56-bit key (14 hex characters) used for the DES encryption."
        ::= { ctPppEcpExtEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.2

        ctPppEcpIV OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(16))
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "A 64-bit initialization vector (16 hex characters) used for 
                the DES encryption in CBC mode."
        ::= { ctPppEcpExtEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.3

--  ctWanalyzer Group
--  This group is mandatory for all platforms which implement the 
--  WANalyzer

--              ctWanalyzerIfIndex
--              ctwanalyzerEnabled
--              ctwanalyzerMaxEntries
--              ctwanalyzerClearAll
--              ctwanalyzerClearInterface
--              ctwanalyzerDisplayInterface
--              ctwanalyzerCurrEntries

        ctWanalyzerTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtWanalyzerEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Table containing the parameters for the local
                Wanalyzer entity related to the configured Protocol."
        ::= { ctWanalyzer 1         }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1

        ctWanalyzerEntry OBJECT-TYPE
        SYNTAX  CtWanalyzerEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Information for a particular
                interface."
        INDEX { ctWanalyzerIfIndex }
        ::= { ctWanalyzerTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1

        CtWanalyzerEntry ::= SEQUENCE   {
                                        ctWanalyzerIfIndex
                                        INTEGER,
                                        ctWanalyzerEnabled
                                        INTEGER,
                                        ctWanalyzerMaxEntries
                                        INTEGER,
                                        ctWanalyzerClearAll
                                        INTEGER,
                                        ctWanalyzerClearInterface
                                        INTEGER,
                                        ctWanalyzerDisplayInterface
                                        INTEGER,
                                        ctWanalyzerCurrEntries
                                        INTEGER
                                        }

        ctWanalyzerIfIndex OBJECT-TYPE
        SYNTAX  INTEGER(1..2147483647)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex of the interface. This is the index of this 
                entry in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctWanalyzerEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.1

        ctWanalyzerEnabled OBJECT-TYPE
        SYNTAX  INTEGER {
                                disabled(1),
                                enabled(2)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This Persistent Object is a flag which indicates whether
                or not the WANalyzer is enabled or disabled. Upon system
                initialization this flag defaults to disabled unless
                a value for this object is found in NVRAM."
        ::= { ctWanalyzerEntry 2         }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.2

        ctWanalyzerMaxEntries OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This Persistent Object is an integer greater than 1
                which specifies the maximum total number of entries 
                which the table will handle. When the WANalyzer is 
                enabled this value defaults to a value dependent on
                the implementation unless a value is found in NVRAM."
        ::= { ctWanalyzerEntry 3         }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.3

    ctWanalyzerClearAll OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "When set to 2, the entire table of entries is cleared.
                Upon clearing of the table, this value is reset to 1.
                This object is not present if the WANalyzer is disabled."
        ::= { ctWanalyzerEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.4

        ctWanalyzerClearInterface OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "When set to 2, all entries for this MIB-II interface 
                index will be removed from the table. Upon complete 
                removal of those entries, this value is reset to 1.
                This object is not present if the WANalyzer is disabled."
        
        ::= { ctWanalyzerEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.5

        ctWanalyzerDisplayInterface     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "When set to a valid MIB-II interface number, the table
                displays only those entries in the table which were
                received from that MIB-II interface. This value is set
                to -1 upon initialization and indicates that entries
                from all interfaces will be displayed. This object 
                is not present if the WANalyzer is disabled."
        ::= { ctWanalyzerEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.6

        ctWanalyzerCurrEntries OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A non-negative integer indicating the current number
                of entries in the table. This object is not present
                if the WANalyzer is disabled."
        ::= { ctWanalyzerEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.7

--      Ctron Wan Table Extentions Group.
--              wanMessageIndex
--              wanMessageInterfaceIndex
--              wanMessageDate
--              wanMessageTime
--              wanMessageCode

        wanalyzerMessageTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF WanalyzerEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A table containing all of the message entries for this 
                device. If the WANalyzer is disabled, this table will
                not be present."
        ::= { ctWanalyzer 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.2

        wanalyzerEntry OBJECT-TYPE
        SYNTAX  WanalyzerEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A message entry in the WANalyzer table corresponding
                to a particular interface in a particular instance."
        INDEX { wanMessageIndex }
        ::= { wanalyzerMessageTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.2.1

        WanalyzerEntry ::= SEQUENCE     {
                                        wanMessageIndex
                                        INTEGER,
                                        wanMessageInterfaceIndex
                                        INTEGER,
                                        wanMessageDate
                                        DisplayString,
                                        wanMessageTime
                                        DisplayString,
                                        wanMessageCode
                                        INTEGER
                                        }

        wanMessageIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "An integer between 1 and wanalyzerMaxEntries which
                indicates the overall position this entry has in the
                WANalyzer table."
        ::= { wanalyzerEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.1

        wanMessageInterfaceIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MIB-II interface index representing the interface
                which sent this message."
        ::= { wanalyzerEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.2

        wanMessageDate OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(8))
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The date when this message was received by the WANalyzer 
                 in the standard MMDDYY format."
        ::= { wanalyzerEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.3

        wanMessageTime OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(6))
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time of day when this message was received by the
                WANalyzer in the standard HHMMSS format."
        ::= { wanalyzerEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.4

        wanMessageCode OBJECT-TYPE
        SYNTAX  INTEGER {
        wanalyzerLastMessageRepeated(1),
        pppAuthentication(2),
        pppBncpThisLayerStart(3),
        pppBncpThisLayerFinished(4),
        pppBncpThisLayerUp(5),
        pppBncpThisLayerDown(6),
        pppBncpInitializeRestartCount(7),
        pppBncpZeroRestartCount(8),
        pppBncpRcvConfReqGood(9),
        pppBncpRcvConfReqBad(10),
        pppBncpReceiveConfigureAck(11),
        pppBncpReceiveConfigureNak(12),
        pppBncpReceiveConfigureReject(13),
        pppBncpReceiveTerminateRequest(14),
        pppBncpReceiveTerminateAck(15),
        pppBncpReceiveCodeRejectPermitted(16),
        pppBncpReceiveCodeRejectCatastrophic(17),
        pppBncpReceiveProtocolRejectPermitted(18),
        pppBncpReceiveEchoRequest(19),
        pppBncpReceiveEchoReply(20),
        pppBncpReceiveDiscardRequest(21),
        pppBncpReceiveUnknownCode(22),
        pppBncpIllegalAction(23),
        pppBncpSendConfigureRequest(24),
        pppBncpSendConfigureAck(25),
        pppBncpSendConfigureNak(26),
        pppBncpSendConfigureReject(27),
        pppBncpSendTerminateRequest(28),
        pppBncpSendTerminateAck(29),
        pppBncpSendCodeReject(30),
        pppBncpSendProtocolReject(31),
        pppBncpSendEchoReply(32),
        pppBncpInitialState(33),
        pppBncpStartingState(34),
        pppBncpClosedState(35),
        pppBncpStoppedState(36),
        pppBncpClosingState(37),
        pppBncpStoppingState(38),
        pppBncpReqSentState(39),
        pppBncpAckRcvdState(40),
        pppBncpAckSentState(41),
        pppBncpOpenedState(42),
        pppBncpEthernetMacType(43),
        pppBncpTokenRingMacType(44),
        pppBncpFddiMacType(45),
        pppBncpBridgeIdRcvReq(46),
        pppBncpBridgeIdRcvNak(47),
        pppBncpBridgeIdRcvRej(48),
        pppBncpBridgeIdXmitReq(49),
        pppBncpMacSelectRcvReq(50),
        pppBncpMacSelectRcvNak(51),
        pppBncpMacSelectRcvRej(52),
        pppBncpMacSelectXmitReq(53),
        pppBncpTinygramRcvReq(54),
        pppBncpTinygramRcvNak(55),
        pppBncpTinygramRcvRej(56),
        pppBncpTinygramXmitReq(57),
        pppBncpLanIdRcvReq(58),
        pppBncpLanIdRcvNak(59),
        pppBncpLanIdRcvRej(60),
        pppBncpLanIdXmitReq(61),
        pppCcpThisLayerStart(62),
        pppCcpThisLayerFinished(63),
        pppCcpThisLayerUp(64),
        pppCcpThisLayerDown(65),
        pppCcpInitializeRestartCount(66),
        pppCcpZeroRestartCount(67),
        pppCcpRcvConfReqGood(68),
        pppCcpRcvConfReqBad(69),
        pppCcpReceiveConfigureAck(70),
        pppCcpReceiveConfigureNak(71),
        pppCcpReceiveConfigureReject(72),
        pppCcpReceiveTerminateRequest(73),
        pppCcpReceiveTerminateAck(74),
        pppCcpReceiveCodeRejectPermitted(75),
        pppCcpReceiveCodeRejectCatastrophic(76),
        pppCcpReceiveProtocolRejectPermitted(77),
        pppCcpReceiveEchoRequest(78),
        pppCcpReceiveEchoReply(79),
        pppCcpReceiveDiscardRequest(80),
        pppCcpReceiveUnknownCode(81),
        pppCcpIllegalAction(82),
        pppCcpSendConfigureRequest(83),
        pppCcpSendConfigureAck(84),
        pppCcpSendConfigureNak(85),
        pppCcpSendConfigureReject(86),
        pppCcpSendTerminateRequest(87),
        pppCcpSendTerminateAck(88),
        pppCcpSendCodeReject(89),
        pppCcpSendProtocolReject(90),
        pppCcpSendEchoReply(91),
        pppCcpInitialState(92),
        pppCcpStartingState(93),
        pppCcpClosedState(94),
        pppCcpStoppedState(95),
        pppCcpClosingState(96),
        pppCcpStoppingState(97),
        pppCcpReqSentState(98),
        pppCcpAckRcvdState(99),
        pppCcpAckSentState(100),
        pppCcpOpenedState(101),
        pppCcpProprietaryCompRcvReq(102),
        pppCcpProprietaryCompRcvNak(103),
        pppCcpProprietaryCompRcvRej(104),
        pppCcpProprietaryCompXmitReq(105),
        pppCcpPredictorType1RcvReq(106),
        pppCcpPredictorType1RcvNak(107),
        pppCcpPredictorType1RcvRej(108),
        pppCcpPredictorType1XmitReq(109),
        pppCcpPredictorType2RcvReq(110),
        pppCcpPredictorType2RcvNak(111),
        pppCcpPredictorType2RcvRej(112),
        pppCcpPredictorType2XmitReq(113),
        pppCcpPuddleJumperRcvReq(114),
        pppCcpPuddleJumperRcvNak(115),
        pppCcpPuddleJumperRcvRej(116),
        pppCcpPuddleJumperXmitReq(117),
        pppCcpHpPpcRcvReq(118),
        pppCcpHpPpcRcvNak(119),
        pppCcpHpPpcRcvRej(120),
        pppCcpHpPpcXmitReq(121),
        pppCcpStacLzsRcvReq(122),
        pppCcpStacLzsRcvNak(123),
        pppCcpStacLzsRcvRej(124),
        pppCcpStacLzsXmitReq(125),
        pppCcpMsPpcRcvReq(126),
        pppCcpMsPpcRcvNak(127),
        pppCcpMsPpcRcvRej(128),
        pppCcpMsPpcXmitReq(129),
        pppCcpGandalfFzaRcvReq(130),
        pppCcpGandalfFzaRcvNak(131),
        pppCcpGandalfFzaRcvRej(132),
        pppCcpGandalfFzaXmitReq(133),
        pppCcpV42bisRcvReq(134),
        pppCcpV42bisRcvNak(135),
        pppCcpV42bisRcvRej(136),
        pppCcpV42bisXmitReq(137),
        pppCcpBsdLzwRcvReq(138),
        pppCcpBsdLzwRcvNak(139),
        pppCcpBsdLzwRcvRej(140),
        pppCcpBsdLzwXmitReq(141),
        pppCcpStackDcpRcvReq(142),
        pppCcpStackDcpRcvNak(143),
        pppCcpStackDcpRcvRej(144),
        pppCcpStackDcpXmitReq(145),
        pppChapChallengeReceived(146),
        pppChapResponseReceived(147),
        pppChapSuccessReceived(148),
        pppChapFailureReceived(149),
        pppChapSuccessSent(150),
        pppChapFailureSent(151),
        pppChapChallengeSent(152),
        pppChapResponseSent(153),
        pppIpcpThisLayerStart(154),
        pppIpcpThisLayerFinished(155),
        pppIpcpThisLayerUp(156),
        pppIpcpThisLayerDown(157),
        pppIpcpInitializeRestartCount(158),
        pppIpcpZeroRestartCount(159),
        pppIpcpRcvConfReqGood(160),
        pppIpcpRcvConfReqBad(161),
        pppIpcpReceiveConfigureAck(162),
        pppIpcpReceiveConfigureNak(163),
        pppIpcpReceiveConfigureReject(164),
        pppIpcpReceiveTerminateRequest(165),
        pppIpcpReceiveTerminateAck(166),
        pppIpcpReceiveCodeRejectPermitted(167),
        pppIpcpReceiveCodeRejectCatastrophic(168),
        pppIpcpReceiveProtocolRejectPermitted(169),
        pppIpcpReceiveEchoRequest(170),
        pppIpcpReceiveEchoReply(171),
        pppIpcpReceiveDiscardRequest(172),
        pppIpcpReceiveUnknownCode(173),
        pppIpcpIllegalAction(174),
        pppIpcpSendConfigureRequest(175),
        pppIpcpSendConfigureAck(176),
        pppIpcpSendConfigureNak(177),
        pppIpcpSendConfigureReject(178),
        pppIpcpSendTerminateRequest(179),
        pppIpcpSendTerminateAck(180),
        pppIpcpSendCodeReject(181),
        pppIpcpSendProtocolReject(182),
        pppIpcpSendEchoReply(183),
        pppIpcpInitialState(184),
        pppIpcpStartingState(185),
        pppIpcpClosedState(186),
        pppIpcpStoppedState(187),
        pppIpcpClosingState(188),
        pppIpcpStoppingState(189),
        pppIpcpReqSentState(190),
        pppIpcpAckRcvdState(191),
        pppIpcpAckSentState(192),
        pppIpcpOpenedState(193),
        pppIpcpIpAddressRcvReq(194),
        pppIpcpIpAddressRcvNak(195),
        pppIpcpIpAddressRcvRej(196),
        pppIpcpIpAddressXmitReq(197),
        pppIpcpCompressionTypeRcvReq(198),
        pppIpcpCompressionTypeRcvRej(199),
        pppIpcpCompressionTypeRcvNak(200),
        pppIpcpCompressionTypeXmitReq(201),
        pppIpxcpThisLayerStart(202),
        pppIpxcpThisLayerFinished(203),
        pppIpxcpThisLayerUp(204),
        pppIpxcpThisLayerDown(205),
        pppIpxcpInitializeRestartCount(206),
        pppIpxcpZeroRestartCount(207),
        pppIpxcpRcvConfReqGood(208),
        pppIpxcpRcvConfReqBad(209),
        pppIpxcpReceiveConfigureAck(210),
        pppIpxcpReceiveConfigureNak(211),
        pppIpxcpReceiveConfigureReject(212),
        pppIpxcpReceiveTerminateAck(214),
        pppIpxcpReceiveCodeRejectPermitted(215),
        pppIpxcpReceiveCodeRejectCatastrophic(216),
        pppIpxcpReceiveProtocolRejectPermitted(217),
        pppIpxcpReceiveEchoRequest(218),
        pppIpxcpReceiveEchoReply(219),
        pppIpxcpReceiveDiscardRequest(220),
        pppIpxcpReceiveUnknownCode(221),
        pppIpxcpIllegalAction(222),
        pppIpxcpSendConfigureRequest(223),
        pppIpxcpSendConfigureAck(224),
        pppIpxcpSendConfigureNak(225),
        pppIpxcpSendConfigureReject(226),
        pppIpxcpSendTerminateRequest(227),
        pppIpxcpSendTerminateAck(228),
        pppIpxcpSendCodeReject(229),
        pppIpxcpSendProtocolReject(230),
        pppIpxcpSendEchoReply(231),
        pppIpxcpInitialState(232),
        pppIpxcpStartingState(233),
        pppIpxcpClosedState(234),
        pppIpxcpStoppedState(235),
        pppIpxcpClosingState(236),
        pppIpxcpStoppingState(237),
        pppIpxcpReqSentState(238),
        pppIpxcpAckRcvdState(239),
        pppIpxcpAckSentState(240),
        pppIpxcpOpenedState(241),
        pppIpxcpCompressionProtocolRcvReq(242),
        pppIpxcpCompressionProtocolRcvNak(243),
        pppIpxcpCompressionProtocolRcvRej(244),
        pppIpxcpCompressionProtocolXmitReq(245),
        pppIpxcpNetworkNumberRcvReq(246),
        pppIpxcpNetworkNumberRcvNak(247),
        pppIpxcpNetworkNumberRcvRej(248),
        pppIpxcpNetworkNumberXmitReq(249),
        pppIpxcpNodeNumberRcvReq(250),
        pppIpxcpNodeNumberRcvNak(251),
        pppIpxcpNodeNumberRcvRej(252),
        pppIpxcpNodeNumberXmitReq(253),
        pppIpxcpRoutingProtocolRcvReq(254),
        pppIpxcpRoutingProtocolRcvNak(255),
        pppIpxcpRoutingProtocolRcvRej(256),
        pppIpxcpRoutingProtocolXmitReq(257),
        pppIpxcpRouterNameRcvReq(258),
        pppIpxcpRouterNameRcvNak(259),
        pppIpxcpRouterNameRcvRej(260),
        pppIpxcpRouterNameXmitReq(261),
        pppIpxcpConfigurationCompleteRcvReq(262),
        pppIpxcpConfigurationCompleteRcvNak(263),
        pppIpxcpConfigurationCompleteRcvRej(264),
        pppIpxcpConfigurationCompleteXmitReq(265),
        pppLcpThisLayerStart(266),
        pppLcpThisLayerFinished(267),
        pppLcpThisLayerUp(268),
        pppLcpThisLayerDown(269),
        pppLcpInitializeRestartCount(270),
        pppLcpZeroRestartCount(271),
        pppLcpRcvConfReqGood(272),
        pppLcpRcvConfReqBad(273),
        pppLcpReceiveConfigureAck(274),
        pppLcpReceiveConfigureNak(275),
        pppLcpReceiveConfigureReject(276),
        pppLcpReceiveTerminateRequest(277),
        pppLcpReceiveTerminateAck(278),
        pppLcpReceiveCodeRejectPermitted(279),
        pppLcpReceiveCodeRejectCatastrophic(280),
        pppLcpReceiveProtocolReject(281),
        pppLcpReceiveEchoRequest(282),
        pppLcpReceiveEchoReply(283),
        pppLcpReceiveDiscardRequest(284),
        pppLcpReceiveUnknownCode(285),
        pppLcpIllegalAction(286),
        pppLcpSendConfigureRequest(287),
        pppLcpSendConfigureAck(288),
        pppLcpSendConfigureNak(289),
        pppLcpSendConfigureReject(290),
        pppLcpSendTerminateRequest(291),
        pppLcpSendTerminateAck(292),
        pppLcpSendCodeReject(293),
        pppLcpSendProtocolReject(294),
        pppLcpSendEchoReply(295),
        pppLcpInitialState(296),
        pppLcpStartingState(297),
        pppLcpClosedState(298),
        pppLcpStoppedState(299),
        pppLcpClosingState(300),
        pppLcpStoppingState(301),
        pppLcpReqSentState(302),
        pppLcpAckRcvdState(303),
        pppLcpAckSentState(304),
        pppLcpOpenedState(305),
        pppLcpMruRcvReq(306),
        pppLcpMruRcvNak(307),
        pppLcpMruRcvRej(308),
        pppLcpMruXmitReq(309),
        pppLcpAsyncCharMapRcvReq(310),
        pppLcpAsyncCharMapRcvNak(311),
        pppLcpAsyncCharMapRcvRej(312),
        pppLcpAsyncCharMapXmitReq(313),
        pppLcpAuthenticationRcvReq(314),
        pppLcpAuthenticationRcvNak(315),
        pppLcpAuthenticationRcvRej(316),
        pppLcpAuthenticationXmitReq(317),
        pppLcpMagicNumberRcvReq(318),
        pppLcpMagicNumberRcvNak(319),
        pppLcpMagicNumberRcvRej(320),
        pppLcpMagicNumberXmitReq(321),
        pppLcpLinkQualityRcvReq(322),
        pppLcpLinkQualityRcvNak(323),
        pppLcpLinkQualityRcvRej(324),
        pppLcpLinkQualityXmitReq(325),
        pppLcpProtCompRcvReq(326),
        pppLcpProtCompRcvNak(327),
        pppLcpProtCompRcvRej(328),
        pppLcpProtCompXmitReq(329),
        pppLcpAddrCompRcvReq(330),
        pppLcpAddrCompRcvNak(331),
        pppLcpAddrCompRcvRej(332),
        pppLcpAddrCompXmitReq(333),
        pppLcpFcs32BitRcvReq(334),
        pppLcpFcs32BitRcvNak(335),
        pppLcpFcs32BitRcvRej(336),
        pppLcpFcs32BitXmitReq(337),
        pppLcpSelfDescPaddingRcvReq(338),
        pppLcpSelfDescPaddingRcvNak(339),
        pppLcpSelfDescPaddingRcvRej(340),
        pppLcpSelfDescPaddingXmitReq(341),
        pppLcpCompoundFramesRcvReq(342),
        pppLcpCompoundFramesRcvNak(343),
        pppLcpCompoundFramesRcvRej(344),
        pppLcpCompoundFramesXmitReq(345),
        pppLcpCallbackRcvReq(346),
        pppLcpCallbackRcvNak(347),
        pppLcpCallbackRcvRej(348),
        pppLcpCallbackXmitReq(349),
        pppLexThisLayerStart(350),
        pppLexThisLayerFinished(351),
        pppLexThisLayerUp(352),
        pppLexThisLayerDown(353),
        pppLexInitializeRestartCount(354),
        pppLexZeroRestartCount(355),
        pppLexRcvConfReqGood(356),
        pppLexRcvConfReqBad(357),
        pppLexReceiveConfigureAck(358),
        pppLexReceiveConfigureNak(359),
        pppLexReceiveConfigureReject(360),
        pppLexReceiveTerminateRequest(361),
        pppLexReceiveTerminateAck(362),
        pppLexReceiveCodeRejectPermitted(363),
        pppLexReceiveCodeRejectCatastrophic(364),
        pppLexReceiveProtocolRejectPermitted(365),
        pppLexReceiveEchoRequest(366),
        pppLexReceiveEchoReply(367),
        pppLexReceiveDiscardRequest(368),
        pppLexReceiveUnknownCode(369),
        pppLexIllegalAction(370),
        pppLexSendConfigureRequest(371),
        pppLexSendConfigureAck(372),
        pppLexSendConfigureNak(373),
        pppLexSendConfigureReject(374),
        pppLexSendTerminateRequest(375),
        pppLexSendTerminateAck(376),
        pppLexSendCodeReject(377),
        pppLexSendProtocolReject(378),
        pppLexSendEchoReply(379),
        pppLexInitialState(380),
        pppLexStartingState(381),
        pppLexClosedState(382),
        pppLexStoppedState(383),
        pppLexClosingState(384),
        pppLexStoppingState(385),
        pppLexReqSentState(386),
        pppLexAckRcvdState(387),
        pppLexAckSentState(388),
        pppLexOpenedState(389),
        pppLexMacTypeSelectRcvReq(390),
        pppLexMacTypeSelectRcvNak(391),
        pppLexMacTypeSelectRcvRej(392),
        pppLexMacTypeSelectXmitReq(393),
        pppLexTinygramCompressRcvReq(394),
        pppLexTinygramCompressRcvNak(395),
        pppLexTinygramCompressRcvRej(396),
        pppLexTinygramCompressXmitReq(397),
        pppLexMacAddressRcvReq(398),
        pppLexMacAddressRcvNak(399),
        pppLexMacAddressRcvRej(400),
        pppLexMacAddressXmitReq(401),
        pppLexMacRelayRcvReq(402),
        pppLexMacRelayRcvNak(403),
        pppLexMacRelayRcvRej(404),
        pppLexMacRelayXmitReq(405),
        pppLexStatisticsRequestRcvReq(406),
        pppLqrSent(407),
        pppLqrReceived(408),
        pppLinkDead(409),
        pppLinkEstablishment(410),
        pppLinkTermination(411),
        pppNetworkLayerPhase(412),
        pppPapAuthenticateReqReceived(413),
        pppPapAuthenticateAckReceived(414),
        pppPapAuthenticateNakReceived(415),
        pppPapAuthenticateReqSent(416),
        pppPapAuthenticateAckSent(417),
        pppPapAuthenticateNakSent(418),
        frGotLmiPacket(500),
        frGotBadQ922Header(501),
        frGotCllmPacket(502),
        frInactiveReceivedPacket(503),
        frReceivedNlpidIpPacket(504),
        frSentXidPacket(505),
        frSentXidResponse(506),
        frReceivedXidPacket(507),
        frXidTimerExpired(508),
        frGotBadUi(509),
        frGotBadSnapPacket(510),
        frLinkUp(511),
        frLinkDown(512),
        frLmiStarted(513),
        frLmiStopped(514),
        frLmiSentFullStatusEnquiry(515),
        frLmiSentKeepAliveMessage(516),
        frLmiStatusResponseReceived(517),
        frLmiGotAnsiReportType(518),
        frLmiGotFullStatusReport(519),
        frLmiGotKeepAliveMessage(520),
        frLmiUnsolicitedKeepAlive(521),
        frLmiAsynchronousStatus(522),
        frLmiGotQ933AReportType(523),
        frLmiBadPvcStatusLength(524),
        frLmiT391TimeoutFs(525),
        frLmiT391TimeoutSe(526),
        frLmiT391PollFailed(527),
        frLmiT391PollSucceeded(528),
        frLmiStatusEnquiryReceived(529),
        frDcpMode1Initializing(530),
        frDcpMode1Disabled(531),
        frDcpMode1ControlPacketReceived(532),
        frDcpMode1DataPacketReceived(533),
        frDcpMode1RequestSent(534),
        frDcpMode1RequestReceived(535),
        frDcpMode1ResponseSent(536),
        frDcpMode1ResponseReceived(537),
        frDcpMode1Operational(538),
        frDcpMode1TimerExpired(539),
        frDcpMode2ControlPacketReceived(540),
        frDcpResetPacketSent(541),
        frDcpResetTimerExpired(542),
        frDcpResetAckSent(543),
        frDcpDictionaryQuotaExceeded(544),
        isdnRemoteConnectionUp(1000),
        isdnRemoteConnectionDown(1001),
        isdnActivateConnection(1002),
        isdnDeactivateConnection(1003),
        multilinkMpLinkUp(1500),
        multilinkMpAddBW(1501),
        multilinkMpRemoveBW(1502),
        multilinkMpSentBeginningFragment(1503),
        multilinkMpSentMiddleFragment(1504),
        multilinkMpSentEndFragment(1505),
        multilinkMpSentCompleteMessage(1506),
        multilinkMpReceivedBeginningFragment(1507),
        multilinkMpReceivedMiddleFragment(1508),
        multilinkMpReceivedEndFragment(1509),
        multilinkMpReceivedCompleteMessage(1510)
                                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "An enumerated value representing the nature of the debug
                 message sent by the interface."
        ::= { wanalyzerEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.5

--
-- Wan Alarms Group
-- This group is required for any platforms that support
-- Cabletron's WAN Alarm processing functionality
--

--
-- DS1 Alarms Global Configuration Variables
--
--      These parameters apply globally to the DS1 Alarms
--      entity.  These variables allow the user to program
--      DS1 alarm characteristics to be the same for all DS1
--      lines installed in the device.  The other option
--      available to the user would be to configure each DS1
--      line individually, using the parameters in the DS1
--      Alarms Configuration Table.
--

        ds1AlarmsGlobalConfigGroup OBJECT IDENTIFIER ::= { ctDs1Alarms 1 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.8.1

        ds1AlarmGlobalAdmin     OBJECT-TYPE
                SYNTAX  INTEGER {
                        disabled(1),    -- default
                        enabled(2)
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to enable and disable the DS1 Alarm
                        Monitoring Application for all DS1 circuits on the 
                        device."
                ::= { ds1AlarmsGlobalConfigGroup 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.1

        ds1AlarmGlobalAutoRecovery      OBJECT-TYPE
                SYNTAX  INTEGER {
                        disabled(1),
                        enabled(2)      -- default
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to enable and disable the DS1 Alarm
                        Automatic Recovery feature for all DS1 circuits on 
                        the device. For those devices that support ds1
                        alarm monitoring, but do not support the automatic
                        recovery feature, this object always returns disabled,
                        and performs no action when written."
                ::= { ds1AlarmsGlobalConfigGroup 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.2

        ds1AlarmGlobalTrapEnable        OBJECT-TYPE
                SYNTAX  INTEGER {
                        disabled(1),
                        enabled(2)      -- default
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to enable and disable the DS1 Alarm
                        SNMP Trap generation feature for all DS1 circuits on 
                        the device.  This object operates in conjunction with 
                        configuration of objects in the ctron-trap-mib.txt"
                ::= { ds1AlarmsGlobalConfigGroup 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.3

        ds1AlarmGlobalESCount   OBJECT-TYPE
                SYNTAX  INTEGER (1..300)        -- default is 100
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used in conjuction with ctDs1AlarmESInterval to set 
                        the threshold for alarm generation when the number of 
                        Errored Seconds for a specified time interval, 
                        measured in minutes, is exceeded.  The default 
                        Errored Seconds alarm condition is 100 errored seconds 
                        over a 6 minute time interval."
                ::= { ds1AlarmsGlobalConfigGroup 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.4

        ds1AlarmGlobalESInterval        OBJECT-TYPE
                SYNTAX  INTEGER (1..15) -- default is 6 minutes
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used in conjuction with ds1AlarmGlobalESCount to 
                        set the threshold for alarm generation when the number 
                        of Errored Seconds for a specified time interval, 
                        measured in minutes, is exceeded.  The default
                        Errored Seconds alarm condition is 100 errored seconds 
                        over a 6 minute time interval."
                ::= { ds1AlarmsGlobalConfigGroup 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.5

        ds1AlarmGlobalBPVErrorRate      OBJECT-TYPE 
                SYNTAX  INTEGER (5..9)  -- default is 6
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to specify the negative exponent of 10, used in
                        monitoring Bipolar Violations (Code Violations for E1)
                        over intervals defined by ds1AlarmGlobalBPVInterval.  
                        For example, for a ds1AlarmGlobalBPVErrorRate value 
                        of 6 used with a ds1AlarmGlobalBPVInterval of 15, 
                        an alarm is generated when a 15 minute period has an 
                        average error rate which exceeds 1 Bipolar Violation 
                        (Code Violation for E1) per million bits.
                        For those devices that support ds1 alarm monitoring
                        but who's hardware does not support detect bipolar
                        violations, this object always returns the default,
                        and performs no action when written."
                ::= { ds1AlarmsGlobalConfigGroup 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.6

        ds1AlarmGlobalBPVInterval       OBJECT-TYPE
                SYNTAX  INTEGER (1..15) -- default is 15 minutes
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to specify the interval, used in monitoring 
                        Bipolar Violations (Code Violations for E1)
                        with thresholds defined by ds1AlarmGlobalBPVErrorRate.
                        For example, for a ds1AlarmGlobalBPVErrorRate value 
                        of 6 used with a ds1AlarmGlobalBPVInterval of 15, an 
                        alarm is generated when a 15 minute period has an 
                        average error rate which exceeds 1 Bipolar Violation 
                        (Code Violation for E1) per million bits.
                        For those devices that support ds1 alarm monitoring
                        but who's hardware does not detect bipolar
                        violations, this object always returns the default,
                        and performs no action when written."
                ::= { ds1AlarmsGlobalConfigGroup 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.7

        ds1AlarmGlobalManualRecovery    OBJECT-TYPE
                SYNTAX  INTEGER {
                        recover(1)
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "To cause a manual recovery to occur on all Ds1 circuits, this
                        object is set to a 1.  It is always read as a 1.  The recovery 
                        will occur only when automatic recovery is disabled."
                ::= { ds1AlarmsGlobalConfigGroup 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.1.8

--
-- DS1 Alarms Configuration Table
--
--      The DS1 alarm table structure contains the same information as the
--      global configuration objects, but allows seperate configuratoin of 
--      specific DS1 circuits contained on the device
--
        ds1AlarmConfigTable OBJECT-TYPE
                SYNTAX      SEQUENCE OF Ds1AlarmConfigEntry
                ACCESS      not-accessible
                STATUS      mandatory
                DESCRIPTION
                        "Table containing objects used to configure DS1 alarm 
                        functionality on a per DS1 basis."
                ::= { ctDs1Alarms 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2
        
        ds1AlarmConfigEntry OBJECT-TYPE
                SYNTAX      Ds1AlarmConfigEntry
                ACCESS      not-accessible
                STATUS      mandatory
                DESCRIPTION
                        "A description of a single entry."
                INDEX       { ds1PhysNum }
                ::= { ds1AlarmConfigTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1
        
        Ds1AlarmConfigEntry ::=
                SEQUENCE {
                        ds1PhysNum
                        INTEGER,
                        ds1AlarmAdmin
                        INTEGER,
                        ds1AlarmAutoRecovery
                        INTEGER,
                        ds1AlarmTrapEnable
                        INTEGER,
                        ds1AlarmESCount
                        INTEGER,
                        ds1AlarmESInterval
                        INTEGER,
                        ds1AlarmBPVErrorRate
                        INTEGER,
                        ds1AlarmBPVInterval
                        INTEGER,
                        ds1AlarmManualRecovery
                        INTEGER
                        }
        
        ds1PhysNum    OBJECT-TYPE
                SYNTAX      INTEGER
                ACCESS      read-only
                STATUS      mandatory
                DESCRIPTION
                        "The value for this object is equal to the value
                        of a unique physical connection identifier associated
                        with this DS1 which is clearly labeled on the device.
                        For those products that do not have a DS1 identifier
                        labeled on the device, the value for this object is
                        the same as rfc1406 dsx1LineIndex."
                ::= { ds1AlarmConfigEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.1
        
        ds1AlarmAdmin   OBJECT-TYPE
                SYNTAX  INTEGER {
                        disabled(1),    -- default
                        enabled(2)
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to enable and disable the DS1 Alarm
                        Monitoring Application for this DS1 circuit."
                ::= { ds1AlarmConfigEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.2

        ds1AlarmAutoRecovery    OBJECT-TYPE
                SYNTAX  INTEGER {
                        disabled(1),
                        enabled(2)      -- default
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to enable and disable the DS1 Alarm
                        Automatic Recovery feature for this DS1 circuit.
                        For those devices that support ds1
                        alarm monitoring, but do not support the automatic
                        recovery feature, this object always returns disabled,
                        and performs no action when written."
                ::= { ds1AlarmConfigEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.3

        ds1AlarmTrapEnable      OBJECT-TYPE
                SYNTAX  INTEGER {
                        disabled(1),
                        enabled(2)      -- default
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to enable and disable the DS1 Alarm
                        SNMP Trap generation feature for this DS1 circuit.
                        This object operates in conjunction with configuration 
                        of objects in the ctron-trap-mib.txt"
                ::= { ds1AlarmConfigEntry 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.4

        ds1AlarmESCount OBJECT-TYPE
                SYNTAX  INTEGER (1..300)        -- default is 100
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used in conjuction with ctDs1AlarmESInterval to set 
                        the threshold for alarm generation when the number of 
                        Errored Seconds for a specified time interval, measured 
                        in minutes, is exceeded.  The default Errored Seconds 
                        alarm condition is 100 errored seconds over a 6 minute
                        time interval."
                ::= { ds1AlarmConfigEntry 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.5

        ds1AlarmESInterval      OBJECT-TYPE
                SYNTAX  INTEGER (1..15) -- default is 6 minutes
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used in conjuction with ctDs1AlarmESCount to set the 
                        threshold for alarm generation when the number of 
                        Errored Seconds for a specified time interval, measured 
                        in minutes, is exceeded.  The default Errored Seconds 
                        alarm condition is 100 errored seconds over a 6 minute 
                        time interval."
                ::= { ds1AlarmConfigEntry 6 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.6

        ds1AlarmBPVErrorRate    OBJECT-TYPE
                SYNTAX  INTEGER (5..9)  -- default is 6
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to specify the negative exponent of 10, used in
                        monitoring Bipolar Violations (Code Violations for E1)
                        over intervals defined by ds1AlarmBPVInterval.  For 
                        example, for a ds1AlarmBPVErrorRate value of 6 used 
                        with a ds1AlarmBPVInterval of 15, an alarm is generated 
                        when a 15 minute period has an average error rate which 
                        exceeds 1 Bipolar Violation (Code Violation for E1) per
                        million bits.
                        For those devices that support ds1 alarm monitoring
                        but who's hardware does not support detect bipolar
                        violations, this object always returns the default,
                        and performs no action when written."
                ::= { ds1AlarmConfigEntry 7 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.7

        ds1AlarmBPVInterval     OBJECT-TYPE
                SYNTAX  INTEGER (1..15) -- default is 15 minutes
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to specify the interval, used in
                        monitoring Bipolar Violations (Code Violations for E1)
                        with thresholds defined by ds1AlarmBPVErrorRate.  For 
                        example, for a ds1AlarmBPVErrorRate value of 6 used 
                        with a ds1AlarmBPVInterval of 15, an alarm is generated 
                        when a 15 minute period has an average error rate
                        which exceeds 1 Bipolar Violation (Code Violation for 
                        E1) per million bits.
                        For those devices that support ds1 alarm monitoring
                        but who's hardware does not support detect bipolar
                        violations, this object always returns the default,
                        and performs no action when written."
                ::= { ds1AlarmConfigEntry 8 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.8

        ds1AlarmManualRecovery  OBJECT-TYPE
                SYNTAX  INTEGER {
                        recover(1)
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "To cause a manual recovery to occur, this object is set
                        to a 1.  It is always read as a 1.  The recovery will 
                        occur only when automatic recovery is disabled."
                ::= { ds1AlarmConfigEntry 9 }
--          1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.9

--
-- Wan Internet Protocol Priority Queue Filters Group
-- This group is required for any platforms that support
-- Cabletron's WAN IP Priority Queue processing functionality
--

--
-- IP PQ Configuration Variables
--
--      These parameters apply to the IP Priority Queue
--      entity.  These variables allow the user to program
--      IP addresses in a filtering database.  The database
--      of IP addresses are used when a WAN service is over
--      subscribed, and the packet would normally be discarded.
--      If the IP PQ admin status is enabled, and the IP 
--      address of the packet to be discarded matches one
--      programmed in the database, an attempt will be made
--      to use high priority, reserved, resources to transmit
--      the packet.  The addresses programmed in this table
--      should be reserved for those packets which MUST be
--      transmitted.  Some examples would be RIP, and SNMP
--      packets, who's loss would cause major networking
--      problems for the system.
--

        ipPQConfigGroup OBJECT IDENTIFIER ::= { ctIPPQFilters 1 }
--                      1.3.6.1.4.1.52.4.1.2.7.2.9.1

        ipPQAdmin       OBJECT-TYPE
                SYNTAX  INTEGER {
                        disabled(1),    -- default
                        enabled(2)
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Used to enable and disable the IP Priority Queue
                        Forwarding Application."
                ::= { ipPQConfigGroup 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.1.1

        iPPQMaxEntries  OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "Returns the maximum number of IP address entries 
                        supported by the IP Priority Queue application on 
                        this device."
                ::= { ipPQConfigGroup 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.1.2

        iPPQNumEntries  OBJECT-TYPE
                SYNTAX  INTEGER 
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "Get the number of IP address entries currently
                        programmed in the ipPQAddressTable."
                ::= { ipPQConfigGroup 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.1.3

        iPPQAddAddress OBJECT-TYPE
                SYNTAX      IpAddress
                ACCESS      read-write
                STATUS      mandatory
                DESCRIPTION
                        "Add an IP address to the ipPQAddressTable. Always
                        read as a 0.0.0.0."
                ::= { ipPQConfigGroup 4 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.1.4
          
        iPPQDelAddress OBJECT-TYPE
                SYNTAX      IpAddress
                ACCESS      read-write
                STATUS      mandatory
                DESCRIPTION
                        "Delete an IP address from the ipPQAddressTable.
                        Always read as a 0.0.0.0."
                ::= { ipPQConfigGroup 5 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.1.5
          
--
--
--
-- IP Priority Queue Address Table
--
--      The IP PQ table contains a list of IP adresses used with the 
--      Priority Queue filtering mechanism. 
--
        ipPQAddressTable OBJECT-TYPE
                SYNTAX      SEQUENCE OF IpPQAddressEntry
                ACCESS      not-accessible
                STATUS      mandatory
                DESCRIPTION
                        "Table containing IP addresses, used in an
                        IP Priority Queue Forwarding function."
                ::= { ctIPPQFilters 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.2
        
        ipPQAddressEntry OBJECT-TYPE
                SYNTAX      IpPQAddressEntry
                ACCESS      not-accessible
                STATUS      mandatory
                DESCRIPTION
                        "A description of a single entry."
                INDEX       { ipPQAddressId }
                ::= { ipPQAddressTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.2.1
        
        IpPQAddressEntry ::=
                SEQUENCE {
                        ipPQAddressId
                        INTEGER,
                        ipPQIPAddress
                        IpAddress
                        }
        
        ipPQAddressId    OBJECT-TYPE
                SYNTAX      INTEGER (1..65535)
                ACCESS      read-only
                STATUS      mandatory
                DESCRIPTION
                        "A unique value identifying an element in a sequence
                        of IP PQ address entries."
                ::= { ipPQAddressEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.1

        ipPQIPAddress    OBJECT-TYPE
                SYNTAX      IpAddress
                ACCESS      read-only
                STATUS      mandatory
                DESCRIPTION
                        "Returns an IP address associated with a specific
                        entry in this table."
                ::= { ipPQAddressEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.2

-- Cabletron Ds3 Extensions Group
-- This group is required for any platforms that have a t3 physical 
-- port.

        ctDs3ExtensionsTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtDs3ExtensionsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table is an extension to the standard ds3 configuration
                table. It is a list of items that are pertinant to ds3 ports
                on a platform. There is one entry per ds3 physical port on
                the platform."
        ::= { ctDs3Ext 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.10.1

        ctDs3ExtensionsEntry OBJECT-TYPE
        SYNTAX  CtDs3ExtensionsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A ds3 extensions entry containing objects relating to
                the particular ds3 physical port."
        INDEX   { ctDs3ExtensionsEntryIndex }
        ::= { ctDs3ExtensionsTable 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.10.1.1

        CtDs3ExtensionsEntry ::=
        SEQUENCE {
                        ctDs3ExtensionsEntryIndex
                        INTEGER,
                        ctDs3ExtensionsNumInterfaces
                        INTEGER,
                        ctDs3ExtensionsLineBuildOut
                        INTEGER
                }

        ctDs3ExtensionsEntryIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A unique value for each ds3 physical port on the platform."
        ::= { ctDs3ExtensionsEntry 1 }
--          1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.1

        ctDs3ExtensionsNumInterfaces OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of interfaces on this physical port. This
                number inidicates the number of entries this physical port
                uses in the ifTable."
        REFERENCE
                "rfc-1213"
        ::= { ctDs3ExtensionsEntry 2 }
--          1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.2

        ctDs3ExtensionsLineBuildOut OBJECT-TYPE
        SYNTAX  INTEGER {
                        unknown(1),
                        zeroto255feet(2),
                        a255to450feet(3)
                                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The line build out setting for this ds3 physical port.
                Unknown indicates that the setting is neither readable or
                writable."
        DEFVAL { zeroto255feet }
        ::= { ctDs3ExtensionsEntry 3 }
--          1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.3

END