path: root/MIBS/ericsson/XF-RADIOLINK-PTP-RADIO-MIB

    XF-RADIOLINK-PTP-RADIO-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        entPhysicalIndex
            FROM ENTITY-MIB
        ifIndex
            FROM IF-MIB
        MODULE-COMPLIANCE, OBJECT-GROUP
            FROM SNMPv2-CONF
        TEXTUAL-CONVENTION, DisplayString
            FROM SNMPv2-TC
        OBJECT-TYPE, MODULE-IDENTITY, Integer32, Unsigned32
            FROM SNMPv2-SMI
        xfRadioLink
            FROM XF-TOP-MIB
        xfTermRowIndex
            FROM XF-RADIOLINK-PTP-TERMINAL-MIB;

    xfRadioLinkPtpRadioMIB MODULE-IDENTITY

        LAST-UPDATED "202009220000Z" -- 22 September 2020
        ORGANIZATION
            "Ericsson AB"
        CONTACT-INFO
            "
            Ericsson AB
            Transmission & Transport Networks
            SE-431 84  Molndal
            Sweden
            "
        DESCRIPTION
            "
            This MIB defines objects for point-to-point Radio Link RAUs.
            "

    REVISION "202009220000Z" -- 22 September 2020
        DESCRIPTION
            "
            Rev. PY26
            - Added new MOs in xfRfIfPowerTable:
              * xfRfAtpcFallbackOutputPower
              * xfRfAtpcFallbackEnable
              * xfRfAtpcFallbackTimer
            "

    REVISION "201911260000Z" -- 26 November 2019
        DESCRIPTION
            "
            Rev. PY25
            - Added new MOs in xfRAuTable:
              * xfRauBoosterCapability
              * xfRauBoosterSelectedIndex
            "

    REVISION "201910140000Z" -- 14 October 2019
        DESCRIPTION
            "
            Rev. PY24
            - Added new MOs in xfRfIfPowerTable:
              * xfRfOutputPower8192QAM
              * xfRfOutputPower16384QAM
            "

    REVISION "201906040000Z" -- 04 June 2019
        DESCRIPTION
            "
            Rev. PY23
            - Added new MOs in ifCableMonitoringTable:
              * xfRfOutlierTrigger
              * xfRfRangeTrigger
        * xfRfStddevTrigger
        * xfRfDegradationTrigger
        * xfRfMarginTrigger
            "

        REVISION "201905160000Z" -- 16 May 2019
        DESCRIPTION
            "
            Rev. PY22
            - Added new MOs in ifCableMonitoringTable:
              * xfRfOutlierValue
              * xfRfRangeValue
        * xfRfStddevValue
        * xfRfDegradationValue
        * xfRfMarginValue
            "

        REVISION "201904300000Z" -- 30 April 2019
        DESCRIPTION
            "
            Rev. PY21
            - Added new table 'xfSdcTable'.
            - Added new MOs in 'xfRfIfPowerTable':
              * xfRfCurrentInputPowerSdcMain
              * xfRfCurrentInputPowerSdcDiv
            "

        REVISION "201901170000Z" -- 17 January 2019
        DESCRIPTION
            "
            Rev. PY20
            - Removed the following alarms in RFAlarms - Textual convention:
              * IfCableDamaged
              * RccWarning
            - Added the following alarms in RFAlarms - Textual convention:
              * AgcOutlier
              * AgcRange
              * AgcStddev
              * AgcDegradation
              * AgcMargin
            "

        REVISION "201810290000Z" -- 29 October 2018
        DESCRIPTION
            "
            Rev. PY19
            New MO 'xfRFSpectrumDiagProgress' added in xfRFSpectrumDiagTable.
            "

        REVISION "201809030000Z" -- 3 September 2018
        DESCRIPTION
            "
            Rev. PY18
            New MOs added in xfRFSpectrumDiagTable.
            "

        REVISION "201804060000Z"  -- 6 April 2018
        DESCRIPTION
            "
            Rev. PY17
            Updated unit of measurement of XPI level in performance monitoring counters:
            from dBm to dB
            "

        REVISION "201801300000Z" -- 30 January 2018
        DESCRIPTION
            "
            Rev. PY16
            New MO 'xfRfTaps' added in xfRfIfPowerTable.
            "

        REVISION "201711230000Z" -- 23 November 2017
        DESCRIPTION
            "
            Rev. PY15
            Changed definition of 'xfRFAlarms' MO.
            "

        REVISION "201709190000Z" -- 19 September 2017
        DESCRIPTION
            "
            Rev. PY14
            Updated comment in xfRFDuplexDistance.
            "

        REVISION "201709050000Z" -- 05 September 2017
        DESCRIPTION
            "
            Rev. PY13
            - Added the following alarms in RFAlarms - Textual convention:
              * IfCableDamaged
              * RccWarning
            "

        REVISION "201707250000Z" -- 25 July 2017
        DESCRIPTION
            "
            Rev. PY12
            xfRAUAlarmStatus MO extended with definition of 'companionRauMismatch' alarm.
            "

        REVISION "201706280000Z" -- 28 June 2017
        DESCRIPTION
            "
            Rev. PY11
            Corrected range for xfRFDuplexDistance MO.
            "

        REVISION "201705240000Z" -- 24 May 2017
        DESCRIPTION
            "
            Rev. PY10
            Introduction of new FF 60 MHz.
            "

        REVISION "201612200000Z" -- 20 December 2016
        DESCRIPTION
            "
            Rev. PY9
            - New MOs Added 'xfRFBoosterGain' and 'xfRFBoosterMaxInputPower' 'xfRFBoosterCapability'
              'xfRFBoosterProductNumber' and 'xfRFBoosterHWRevision' in xfRFPowerTable.
            "

        REVISION "201606160000Z" -- 16 June 2016
        DESCRIPTION
            "
            Rev. PY8
            - Added definition of 'remoteRfIfHighestSeverityAlarm' alarm in 'RFAlarms' textual convention.
            "

        REVISION "201606010000Z" -- 01 June 2016
        DESCRIPTION
            "
            Rev. PY7
            - New MOs 'xfRfAvailableOutputPowerType' and 'xfRfSelectedOutputPowerType'
              added in xfRfIfPowerTable.
            "

        REVISION "201605160000Z" -- 16 May 2016
        DESCRIPTION
            "
            Rev. PY6
            - Updated description for some MOs, to better specify
              'default' and 'invalid' output power definitions.
            "

        REVISION "201605100000Z" -- 10 May 2016
        DESCRIPTION
            "
            Rev. PY5
            - 'Obsolete' MOs set back to 'current' status
              in order to remove warnings.
            "

        REVISION "201604120000Z" -- 12 April 2016
        DESCRIPTION
            "
            Rev. PY4
            - Updated description for xfRfInputPowerReset MO.
            "

        REVISION "201602220000Z" -- 22 February 2016
        DESCRIPTION
            "
            Rev. PY3
            - Description updated for some MOs.
            - Readability improvements (formatting).
            "

        REVISION "201602060000Z" -- 06 February 2016
        DESCRIPTION
            "
            Rev. PY2
            - Added the following alarms in RFAlarms - Textual convention:
              * rlts1Counter15m
              * rlts2Counter15m
              * rltmCounter15m
              * tlts1Counter15m
              * tltmCounter15m
              * rlts1Counter24h
              * rlts2Counter24h
              * rltmCounter24h
              * tlts1Counter24h
              * tltmCounter24h
            - Obsoleted the following MOs in table xfRFPowerTable and
              moved-renamed in xfRAUIFTable:
              * xfRfMaxMSELast7Days
              * xfRfMinMSELast7Days
              * xfRfMaxXPILast7Days
              * xfRfMinXPILast7Days
            - Added MOs for Extended RF PM in table xfRfIfPowerTable:
              * xfRfMeanInputPower1m
              * xfRfMaxOutputPowerLast7Days
              * xfRfMinOutputPowerLast7Days
              * xfRfMaxOutputPowerSinceReset
              * xfRfMinOutputPowerSinceReset
              * xfRfOutputPowerReset
            "

        REVISION "201602050000Z" -- 05 February 2016
        DESCRIPTION
            "
            Rev. PY1
            - Updated description for xfRFCurrentStepNumber.
            - Updated description for xfRFCurrentStepNumberRx.
            "

        REVISION "201512110000Z" -- 11 December 2015
        DESCRIPTION
            "
            Rev. PX9
            xfRfIfPowerTable moved at the end of file, fixing HU44212.
            "

        REVISION "201511050000Z" -- 05 November 2015
        DESCRIPTION
            "
            Rev. PX8
            - atpcVersionMismatch alarm definition removed from xfRAUAlarmStatus object (never used before).
            - insufficientResourceRauXpic alarm definition added to xfRAUAlarmStatus object.
            "

        REVISION "201508310000Z" -- 31 August 2015
        DESCRIPTION
            "
            Rev. PX7
            * New objects added in xfRFIFTable:
              - xfRFDuplexType
              - xfRFDuplexConfig
              - xfRFDuplexDistance
            "

        REVISION "201507020000Z" -- 2 July 2015
        DESCRIPTION
            "
            Rev. PX6
            Added new tables xfRFSpectrumDiagTable and xfRFSpectrumDiagResultTable
            "

        REVISION "201506250000Z" -- 25 June 2015
        DESCRIPTION
            "
            Rev. PX5
            Merged content from 19089-FAL1044129_1_X_PBB5.
            "

        REVISION "201506080000Z" -- 8 June 2015
        DESCRIPTION
            "
            Rev. PX4
            Updated description text for the following MOs:
                     xfRFMaxMSELast7Days, xfRFMinMSELast7Days
            "

        REVISION "201504230000Z" -- 23 April 2015
        DESCRIPTION
            "
            Rev. PX3
            - xfRfSelectedMinOutputPower object added.
            - xfRfSelectedMaxOutputPower object added.
            "

        REVISION "201504200000Z" -- 20 April 2015
        DESCRIPTION
            "
            Rev. PX2
            - xfRfAtpcSelectedInputPowerFar object renamed in xfRfAtpcTargetInputPowerFE.
            "

        REVISION "201504020000Z" -- 02 April 2015
        DESCRIPTION
            "
            Rev. PX1
            - xfRauAtpcVersion object added in xfRAUTable.
            - Definition of xfRAUAlarmStatus extended with atpcVersionMismatch.
            - Added new table xfRfIfPowerTable.
            "

        REVISION "201502260000Z" -- 26 February 2015
        DESCRIPTION
            "
            Add new MIBs to xfRFPowerTable for improved power monitoring.
            New MOs: xfRFMeanInputPower1m,         xfRFMaxOutputPowerLast7Days,
                     xfRFMinOutputPowerLast7Days,  xfRFMaxOutputPowerSinceReset,
                     xfRFMinOutputPowerSinceReset, xfRFMaxMSELast7Days,
                     xfRFMinMSELast7Days,          xfRFMaxXPILast7Days,
                     xfRFMinXPILast7Days,          xfRFOutputPowerReset
            "

        REVISION "201501231000Z" -- 23 January 2015
        DESCRIPTION
            "
            Modified definition for xfRauNotes to have a valid syntax definition.
            "

        REVISION "201501230000Z" -- 23 January 2015
        DESCRIPTION
            "
            Add new MIB xfRAUNotes to xfRAUTable.
            "

        REVISION "201501090000Z" -- 09 January 2015
        DESCRIPTION
            "
            Rev. V
            - Changed MO: xfRAUSubBand in xfRAUTable becomes R/W (previously R only)
            - New Table: xfRAUSubBandTable (as xfRadioLinkPtpRadioObjects object)
            "

        REVISION "201402200000Z" -- 20 Febuary 2014
        DESCRIPTION
            "
            Rev. PU2
            - New value: sdcDadeCalMismatch in xfRAUAlarmStatus
            "

        REVISION "201311220000Z" -- 22 November 2013
        DESCRIPTION
            "
            Rev. PU1
            New MO: xfRFCurrentInputPowerSdcMain and xfRFCurrentInputPowerSdcDiv in xfRFPowerTable
            "

        REVISION "201311191400Z" -- 19 Nov 2013
        DESCRIPTION
            "
            Rev. T
            - Official R-State for M14A
            "

        REVISION "201105230000Z" -- 23 May 2011
        DESCRIPTION
            "
            Rev. S
            - Official R-State for TN 4.4 FP
            "

        REVISION "201102090000Z" -- 09 February 2011
        DESCRIPTION
            "
            Rev. PS4
            - New MO: xfRAUCarrierMode in xfRAUCapabilityTable
            "

        REVISION "201102010000Z" -- 01 February 2011
        DESCRIPTION
            "
            Rev. PS3
            - Correction for new 1024-QAM
            "

        REVISION "201012100000Z" -- 10 December 2010
        DESCRIPTION
            "
            Rev. PS2
            - Added 1024-QAM
            "

        REVISION "201010200000Z" -- 20 October 2010
        DESCRIPTION
            "
            Rev. PS1
            - New MO: xfRFAtpcFallbackTimer in xfRFPowerTable
            "

        REVISION "201009230000Z" -- 23 September 20010
        DESCRIPTION
            "
            Rev. N
            - Changed RfInputThreshold default value to -93dBm
            "

        REVISION "201006150000Z" -- 15 June 20010
        DESCRIPTION
            "
            Rev. PN1
            - New MO: xfRAURxCapability in xfRAUTable
            "

        REVISION "201006040000Z" -- 04 June 2010
        DESCRIPTION
            "
            Rev. PN
            - New value: swNeedUpdate in xfRAUAlarmStatus
            "

        REVISION "201001190000Z" -- 19 January 2010
        DESCRIPTION
            "
            Rev. M
            - Official R-State for TN 4.3
            "

        REVISION "200912010000Z" -- 01 December 2009
        DESCRIPTION
            "
            Rev. PM2
            - Change name on xfRFAtpcFallbackMaxOutputPower to xfRFAtpcFallbackOutputPower
            - Removed warnings about xfRFAtpcFallbackOutputPower(xfRFAtpcFallbackMaxOutputPower) and
              xfRFAtpcFallbackEnable not included in xfRadioLinkPtpRadioCompleteGroup
            - Updated xfRFAlarms
            - New alarm: rfOutputLevelATPC
            - Updated xfRAUAlarmStatus
            - New alarm: ConfigurationInvalid
            "

        REVISION "200911180000Z" -- 18 November 2009
        DESCRIPTION
            "
            Rev. PM1
            - New MO: xfRFAtpcFallbackMaxOutputPower and xfRFAtpcFallbackEnable in xfRFPowerTable
            "

        REVISION "200906260000Z" -- 26 June 2009
        DESCRIPTION
            "
            Rev. L
            - Update of revision history
            "

        REVISION "200906240000Z" -- 24 June 2009
        DESCRIPTION
            "
            Rev. L
            - Official Rev for TN 4.2
            "

        REVISION "200904200000Z" -- 20 April 2009
        DESCRIPTION
            "
            Rev. K
            - Official Rev for TN 4.1 FP
            "

        REVISION "200904140000Z"
        DESCRIPTION
            "
            Rev. PK8
            - Changes for TN 4.2
            - Spectrum Effeciency Class index values have changed
            - Adde new Spectrum Effeciency Class values
            - Added channelspacing chsp3500kHz(10)
            "

        REVISION "200810020000Z"
        DESCRIPTION
            "
            Rev. PK7
            - Changes for TN 4.1/4.2
            - Removed table: xfRFOutputPowerTable
            - New MO: xfRFOutputPowerTable in xfRFPowerTable
            - Fixed double index issue in xfRAUCapabilityTable
            "

        REVISION "200809160000Z"
        DESCRIPTION
            "
            Rev. PK6
            - Changes for TN 4.1
            - New table: xfRFOutputPowerTable
            "

        REVISION "200806250000Z"
        DESCRIPTION
            "
            Rev. PK5
            - Changes for TN 4.1
            - Changes in table: xfRAUCapabilityTable (xfRAUChannelModulation)
            "

        REVISION "200806240000Z"
        DESCRIPTION
            "
            Rev. PK4
            - Changes for TN 4.1
            - Changes in table: xfRAUCapabilityTable (xfRAUChannelModulation)
            "

        REVISION "200806180000Z"
        DESCRIPTION
            "
            Rev. PK3
            - Changes for TN 4.1
            - Changes in table: xfRAUCapabilityTable
            "

        REVISION "200806170000Z"
        DESCRIPTION
            "
            Rev. PK2
            - Changes for TN 4.1
            - Changes in table: xfRAUCapabilityTable
            "

        REVISION "200806040000Z"
        DESCRIPTION
            "
            Rev. PK1
            - Changes for TN 4.1
            - New table: xfRAUCapabilityTable
            "

        REVISION "200706040000Z"
        DESCRIPTION
            "
            Rev. J
            - MIB files changes according to 1/15519-CRH109625/1 Uae Rev U
            - xfRFLoopEnable: Changed comment regarding far end limitation to no access
            - xfRFAttenuator: Changed comment regarding far end limitation.
            - xfRFInputPowerReset: Changed comment regarding far end limitation to read-write (Traffic Node only)
            "

        REVISION "200609191320Z"
        DESCRIPTION
            "
            Rev. H
            - MIB files changes according to 1/15519-CRH109625/1 Uae Rev M + errata
            - Changed syntax of object xfRFTxAdminStatus for better readability in a MIB-browser
            "

        REVISION "200608290000Z"
        DESCRIPTION
            "
            Rev. PH1
            - Added 64-QAM to RAUModCapability
            "

        REVISION "200603200000Z"
        DESCRIPTION
            "
            Rev. G
            - MIB files changes according to 1/15519-CRH109625/1 Uae Rev K
            - Addition of Enum values for RAUModCapability to support ANSI
            "

        REVISION "200602240000Z"
        DESCRIPTION
            "
            Rev. F
            - Access restrictions explained in the description field for each MO
            "

        REVISION "200601310000Z"
        DESCRIPTION
            "
            Rev. E
            - New value (0) for xfRFMaxInputPowerLast7Days and xfRFMinInputPowerLast7Days
            - xfRFRtpcSelectedOutputPower: Value 255 no longer valid
            - xfRFAtpcMaxOutputPower: Value 255 no longer valid. New value: 254
            - xfRFAtpcSelectedInputPowerFar: Value 255 no longer valid. New default value
            - xfRFAttenuator: Value 255 no longer valid. New default value
            "

        REVISION "200412130000Z"
        DESCRIPTION
            "
            Rev. D
            - Changes according to 1/15519-CRH109625/1 Uae Rev D
            - New value (other) for RFTxAdminStatus
            - Changed MO xfRFInputPowerThreshold to MO xfRFInputAlarmThreshold (xfRFPowerTable)
            - MO xfRFRtpcSelectedOutputPower: Value 254 = max power (default)
            - MO xfRFAttenuator: Value 255 (new default)
            - DEFVAL removed. Default value info declared in corresponding description fields
            "

        REVISION "200407020000Z"
        DESCRIPTION
            "
            Rev. C
            - All config alarms are removed
            "

        REVISION "200406160000Z"
        DESCRIPTION
            "
            Rev. B
            - All config alarms are defined
            - Alarms are updated with new names
            "

        REVISION "200405250000Z"
        DESCRIPTION
            "
            Rev. PB2
            - Minor changes
            "

        REVISION "200404260000Z"
        DESCRIPTION
            "
            Rev. PB1
            - Added MO: xfRAUTemperature, xfRFInputPowerAlarmThreshold, xfRFLoopEnable
            - Added Table: xfRFPowerTable
            "

        REVISION "200401200000Z"
        DESCRIPTION
            "
            Rev. A
            - Other is added to integer enumerations
            - RFTxStatus object is split into admin and oper objects
            - Integer types updated
            "

        REVISION "200312171000Z"
        DESCRIPTION
            "
            Rev. PA1
            - Initial revision
            "

        ::= { xfRadioLink 3 }

--
-- Textual conventions
--

    RFTxOperStatus ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "This TC enumerates the Tx operational status."
        SYNTAX INTEGER
        {
            other(1),
            txOff(2),
            txOn(3),
            txStandby(4)
        }

    RAURfLoopAvailable ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "This TC enumerates the RF loop."
        SYNTAX INTEGER
        {
            other(1),
            rfLoopAvailable(2),
            rfLoopNotAvailable(3)
        }

    RAUAtpcCapability ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "This TC enumerates the ATPC capability."
        SYNTAX INTEGER
        {
            other(1),
            noAtpcSupport(2),
            doesNotExist(3),
            atpcCapabilityUnknown(4),
            supportsAtpc(5)
        }

    RAUModCapability ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
        "
        This TC enumerates the modulation capabilities.
        Modulation capabilities is indicated by 5 bits:
        bits 01234
          00000  undetermined
          00001  C-QPSK
          00010  16-QAM
          00011  C-QPSK & 16-QAM
          00100  128-QAM
          01000  32-QAM
          10000  64-QAM
          ...
          11111  C-QPSK & 16-QAM & 128-QAM & 32-QAM & 64-QAM
        "
        SYNTAX BITS
        {
            cqpsk(0),
            qam16(1),
            qam128(2),
            qam32(3),
            qam64(4)
        }

    RAUChannelSpacingCapability ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "Channel spacing capability."
        SYNTAX INTEGER
        {
            chspUnknown(0),
            chsp7MHz(1),
            chsp14MHz(2),
            chsp20MHz(3),
            chsp28MHz(4),
            chsp30MHz(5),
            chsp40MHz(6),
            chsp50MHz(7),
            chsp56MHz(8),
            chsp10MHz(9),
            chsp3500KHz(10),
            chsp60MHz(11)
        }

    RauSec ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "Spectrum Effeciency Class."
        SYNTAX INTEGER
        {
            other(1),
            sec2(2),
            sec3(3),
            sec4L(4),
            sec4H(5),
            sec5A(6),
            sec5B(7),
            sec6A(8),
            sec6B(9)
        }

    RAUModulation ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "Type of modulation."
        SYNTAX INTEGER
        {
            other(1),
            cqpsk(2),
            qam16(3),
            qam128(4),
            qam32(5),
            qam64(6),
            qam4(7),
            qam8(8),
            qam256(9),
            qam512(10),
            qam1024(11)
        }

    ATPCFallbackEnable ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "ATPC fallback enable status."
        SYNTAX INTEGER
        {
            other(1),
            disable(2),
            enable(3)
        }

    RfOutputPower ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "RF output power in dBm."
        SYNTAX Integer32 (-100..45|255)

    RfInputPower ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "RF Input power in dBm/10."
        SYNTAX Integer32 (-999..-200|0)

    BoosterCapability ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "Booster capabilities values codes."
        SYNTAX INTEGER
        {
            other(1),
            noBoosterSupport(2),
            boosterSupport(3)
        }

--
-- Node definitions
--

    xfRadioLinkPtpRadioObjects     OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioMIB 1 }
    xfRadioLinkPtpRadioConformance OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioMIB 2 }

------------------------------------------------------------------------------
-- xfRAUTable
------------------------------------------------------------------------------

    xfRAUTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRAUEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "
            Table for Radiolink point-to-point radios managed objects.
            Table indexed with entPhysicalIndex.
            "
        ::= { xfRadioLinkPtpRadioObjects 1 }

    xfRAUEntry OBJECT-TYPE
        SYNTAX XfRAUEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in xfRadioTable."
        INDEX { entPhysicalIndex }
        ::= { xfRAUTable 1 }

    XfRAUEntry ::=
        SEQUENCE
        {
            xfRAUAlarmStatus           BITS,
            xfRAURfLoopAvailable       RAURfLoopAvailable,
            xfRAUAtpcCapability        RAUAtpcCapability,
            xfRAULocalCtrlCapability   INTEGER,
            xfRAUModCapability         RAUModCapability,
            xfRAUFrequencyband         Unsigned32,
            xfRAUSubBand               Unsigned32,
            xfRAUTemperature           Integer32,
            xfRAUProtectionPath        INTEGER,
            xfRAURxCapability          INTEGER,
            xfRAUNotes                 OCTET STRING,
            xfRauAtpcVersion           INTEGER,
            xfRauBoosterCapability     BoosterCapability,
            xfRauBoosterSelectedIndex  Integer32
        }

--
-- xfRAUTable MOs
--

    xfRAUAlarmStatus OBJECT-TYPE
        SYNTAX BITS
        {
            atpcCapability0(0),
            atpcCapability1(1),
            atpcCapability2(2),
            configurationInvalid0(3),
            configurationInvalid1(4),
            configurationInvalid2(5),
            sdcHwErrorMain0(6),
            sdcHwErrorMain1(7),
            sdcHwErrorMain2(8),
            sdcHwErrorDiv0(9),
            sdcHwErrorDiv1(10),
            sdcHwErrorDiv2(11),
            sdcDadeCalMismatch0(12),
            sdcDadeCalMismatch1(13),
            sdcDadeCalMismatch2(14),
            insufficientResourceRauXpic0(15),
            insufficientResourceRauXpic1(16),
            insufficientResourceRauXpic2(17),
            companionRauMismatch0(18),
            companionRauMismatch1(19),
            companionRauMismatch2(20)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the alarm status of the radio unit.
            atpcCability - The terminal is configured for ATPC, but the radio does not support ATPC.
                           This alarm is activated only if ATPC is turned on (any direction).
            sdcHwErrorMain - Received RF input signal level for Main path (of SDC TRX) has dropped below the threshold for the receiver.
            sdcHwErrorDiv - Received RF input signal level for Diversity path (of SDC TRX) has dropped below the threshold for the receiver.
            sdcDadeCalMismatch - A TRX is connected and its Serial Number doesn't match with the serial number stored into MO xfTRXSdcSerialNumber.
            insufficientResourceRauXpic - Connected RAU is missing capabilities for XPIC.
            companionRauMismatch - Connected RAU does not match with the companion one, either in 1+1 RLP or XPIC.
            "
        ::= { xfRAUEntry 1 }

    xfRAURfLoopAvailable OBJECT-TYPE
        SYNTAX RAURfLoopAvailable
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object inidicates if RF loop is available in radio unit.
            "
        ::= { xfRAUEntry 2 }

    xfRAUAtpcCapability OBJECT-TYPE
        SYNTAX RAUAtpcCapability
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object indicates if the radio unit supports ATPC or not.
            "
        ::= { xfRAUEntry 3 }

    xfRAULocalCtrlCapability OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noLocalControlSupport(2),
            supportsLocalControl(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object indicates if the radio unit supports local
            transmit power control or not.
            "
        ::= { xfRAUEntry 4 }

    xfRAUModCapability OBJECT-TYPE
        SYNTAX RAUModCapability
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the modulation methods supported
            by the radio unit.
            "
        ::= { xfRAUEntry 5 }

    xfRAUFrequencyband OBJECT-TYPE
        SYNTAX Unsigned32 (0..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the frequency band for the radio unit.
            "
        ::= { xfRAUEntry 6 }

    xfRAUSubBand OBJECT-TYPE
        SYNTAX Unsigned32 (0..255)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object shows the sub band (Index) for the radio unit.
            "
        ::= { xfRAUEntry 7 }

    xfRAUTemperature OBJECT-TYPE
        SYNTAX Integer32 (-127..127)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the temperature, in degree Celsius, inside
            the radio unit.
            "
        ::= { xfRAUEntry 8 }

    xfRAUProtectionPath OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            rauRa1(2),
            rauRa2(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object indicates what radio path the radio belongs to.
            "
        ::= { xfRAUEntry 9 }

    xfRAURxCapability OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            rxSupport(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object indicates if the radio unit support RX configuration.
            "
        ::= { xfRAUEntry 10 }

    xfRAUNotes OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE (0..800))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "You can add information in this description field,
            for example polarization, antenna type or logging a site visit."
        ::= { xfRAUEntry 11 }

    xfRauAtpcVersion OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            version1(2),
            version2(3),
            version3(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object represents the RAU ATPC version.
            "
        ::= { xfRAUEntry 12 }

    xfRauBoosterCapability OBJECT-TYPE
        SYNTAX BoosterCapability
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object represents the Booster capability for a link.
            "
        ::= { xfRAUEntry 13 }

    xfRauBoosterSelectedIndex OBJECT-TYPE
        SYNTAX Integer32 (0..2147483647)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object represents the Booster selected index for a link.
            "
        ::= { xfRAUEntry 14 }

------------------------------------------------------------------------------
-- xfRFIFTable
------------------------------------------------------------------------------

    xfRFIFTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRFIFEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "
            Table for Radiolink point-to-point radios RF IF managed objects.
            Table indexed with ifIndex.
            "
        ::= { xfRadioLinkPtpRadioObjects 2 }

    xfRFIFEntry OBJECT-TYPE
        SYNTAX XfRFIFEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRFIFTable."
        INDEX { ifIndex }
        ::= { xfRFIFTable 1 }

    XfRFIFEntry ::=
        SEQUENCE
        {
            xfRFBaseTxFrequency     Unsigned32,
            xfRFBaseRxFrequency     Unsigned32,
            xfRFStepSize            Unsigned32,
            xfRFStepLimitLow        Unsigned32,
            xfRFStepLimitHigh       Unsigned32,
            xfRFCurrentStepNumber   Unsigned32,
            xfRFTxOperStatus        RFTxOperStatus,
            xfRFTxAdminStatus       INTEGER,
            xfRFLoopEnable          INTEGER,
            xfRFAlarms              BITS,
            xfRFStatus              BITS,
            xfRFStepSizeRx          Unsigned32,
            xfRFStepLimitLowRx      Unsigned32,
            xfRFStepLimitHighRx     Unsigned32,
            xfRFCurrentStepNumberRx Unsigned32,
            xfRFDuplexType          INTEGER,
            xfRFDuplexConfig        INTEGER,
            xfRFDuplexDistance      Integer32
        }

--
-- xfRFIFTable MOs
--

    xfRFBaseTxFrequency OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the Tx frequency in KHz when frequency
            step number is 0.
            "
        ::= { xfRFIFEntry 1 }

    xfRFBaseRxFrequency OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the Rx frequency in KHz when frequency.
            step number is 0
            "
        ::= { xfRFIFEntry 2 }

    xfRFStepSize OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the frequency step size in KHz.
            "
        ::= { xfRFIFEntry 3 }

    xfRFStepLimitLow OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the lowest allowed frequency step number.
            "
        ::= { xfRFIFEntry 4 }

    xfRFStepLimitHigh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the highest allowed frequency step number.
            "
        ::= { xfRFIFEntry 5 }

    xfRFCurrentStepNumber OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object sets/shows the frequency step number.
            0 = frequency not yet defined.

            For Classic RAUs, TX and RX frequencies can not be set individually.
            The span between them is always fixed and depends on different frequency and sub band.
            - To calculate step number for TX and RX, use the following formulas:
              New step number = (TX frequency - XfRAUBaseTxFrequency) / XfRAUStepSize
              New step number = (RX frequency - xfRAUBaseRxFrequency) / XfRAUStepSize
            - To calculate TX and RX frequencies, use the following formulas:
              TX frequency = XfRAUBaseTxFrequency + XfRAUCurrentStepNumber * XfRAUStepSize
              RX frequency = XfRAUBaseRxFrequency + XfRAUCurrentStepNumber * XfRAUStepSize

            For Agile RAUs, the TX and RX frequencies can be set individually.
            Above formulas are only valid for TX frequency.
            For RX frequency, xfRFCurrentStepNumberRx must be used.

            Default value: 0
            "
        ::= { xfRFIFEntry 6 }

    xfRFTxOperStatus OBJECT-TYPE
        SYNTAX RFTxOperStatus
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the operational status of the transmitter.
            "
        ::= { xfRFIFEntry 7 }

    xfRFTxAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            txOff(2),
            txOn(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object sets the desired status of the transmitter.
            Value other(1) not settable.

            Especially for far end:
              txOff(2), requests far end transmitter to be turned off.
              txOn(3), requests far end transmitter to be turned on.
              Default value: txOff(2) - near end.
                             other(1) - far end.
            "
        ::= { xfRFIFEntry 8 }

    xfRFLoopEnable OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object manage RF loop.
            Default value: disable(3).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFEntry 9 }

    xfRFAlarms OBJECT-TYPE
        SYNTAX BITS
        {
            txFrequency0(0),
            txFrequency1(1),
            txFrequency2(2),
            rxFrequency0(3),
            rxFrequency1(4),
            rxFrequency2(5),
            rfOutputLevel0(6),
            rfOutputLevel1(7),
            rfOutputLevel2(8),
            rxAfc0(9),
            rxAfc1(10),
            rxAfc2(11),
            rfInputLevel0(12),
            rfInputLevel1(13),
            rfInputLevel2(14),
            rfInputThreshold0(15),
            rfInputThreshold1(16),
            rfInputThreshold2(17),
            rfOutputLevelATPC0(18),
            rfOutputLevelATPC1(19),
            rfOutputLevelATPC2(20),
            sdcRfInputLevelMain0(21),
            sdcRfInputLevelMain1(22),
            sdcRfInputLevelMain2(23),
            sdcRfInputLevelDiv0(24),
            sdcRfInputLevelDiv1(25),
            sdcRfInputLevelDiv2(26),
            rlts1Counter15m0(27),
            rlts1Counter15m1(28),
            rlts1Counter15m2(29),
            rlts2Counter15m0(30),
            rlts2Counter15m1(31),
            rlts2Counter15m2(32),
            rltmCounter15m0(33),
            rltmCounter15m1(34),
            rltmCounter15m2(35),
            tlts1Counter15m0(36),
            tlts1Counter15m1(37),
            tlts1Counter15m2(38),
            tltmCounter15m0(39),
            tltmCounter15m1(40),
            tltmCounter15m2(41),
            rlts1Counter24h0(42),
            rlts1Counter24h1(43),
            rlts1Counter24h2(44),
            rlts2Counter24h0(45),
            rlts2Counter24h1(46),
            rlts2Counter24h2(47),
            rltmCounter24h0(48),
            rltmCounter24h1(49),
            rltmCounter24h2(50),
            tlts1Counter24h0(51),
            tlts1Counter24h1(52),
            tlts1Counter24h2(53),
            tltmCounter24h0(54),
            tltmCounter24h1(55),
            tltmCounter24h2(56),
            remoteRfIfHighestSeverityAlarm0(57),
            remoteRfIfHighestSeverityAlarm1(58),
            remoteRfIfHighestSeverityAlarm2(59),
            ifcabledamaged0(60),
            ifcabledamaged1(61),
            ifcabledamaged2(62)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "
        This TC enumerates the alarms for RF interface.
        txFrequency       - Transmitter frequency synthesizer loop is unlocked.
        rxFrequency       - Receiver frequency synthesizer loop is unlocked.
        rfOutputLevel     - Major degradation of transmitter output power is detected.
        rxAfc             - The frequency of the received signal is outside the range of the Automatic Frequency Control in the RAU receiver.
        rfInputLevel      - Receiver RF input signal level has dropped below the threshold for the receiver.
        rfInputThreshold  - The RF input level has dropped below the xfRFInputAlarmThreshold.
        rfOutputLevelATPC - The transmitter output power has been continuously at 'Patpc,max' for too long.
                            This can occur due to several reasons:
                            * The operator has set 'Patpc,max' too low.
                            * The hop attenuation has increased (steady-state).
                            * The transmitter PA is v.
                            * The LNA in Rx is deteriorating.
        "
        ::= { xfRFIFEntry 10 }

    xfRFStatus OBJECT-TYPE
        SYNTAX BITS
        {
            rfLoop0(0),
            rfLoop1(1),
            rfLoop2(2),
            txOff0(3),
            txOff1(4),
            txOff2(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the RAU status.
            rfLoop - Warns if RF-loop is enabled on RAU
            txOff  - Warns if TX is manually set to off
            "
        ::= { xfRFIFEntry 11 }

    xfRFStepSizeRx OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the Rx frequency step size in KHz.
            "
        ::= { xfRFIFEntry 12 }

    xfRFStepLimitLowRx OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the Rx lowest allowed frequency step number.
            "
        ::= { xfRFIFEntry 13 }

    xfRFStepLimitHighRx OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the Rx highest allowed frequency step number.
            "
        ::= { xfRFIFEntry 14 }

    xfRFCurrentStepNumberRx OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object sets/shows the RX frequency step number for Agile RAUs.
            0 = frequency not yet defined.

            - To calculate step number for RX, use the following formula:
              New step number Rx = (RX frequency - xfRAUBaseRxFrequency) / XfRAUStepSizeRx
            - To calculate RX frequency, use the following formula:
              RX frequency = XfRAUBaseRxFrequency + XfRAUCurrentStepNumberRx * XfRAUStepSizeRx

            Default value: 0
            "
        ::= { xfRFIFEntry 15 }

    xfRFDuplexType OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            fixed(2),
            variable(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object tells the duplex frequency mode for the RAU:
            - fixed: Tx frequency only can be set by operator, Rx frequency is
              automatically set on the basis of (fixed) RAU duplex frequency
            - variable: duplex frequency can be configured by operator
            "
        ::= { xfRFIFEntry 16 }

    xfRFDuplexConfig OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enabled(2),
            disabled(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object enables setting of duplex frequency for the RAU.
            It is always disabled(3) and can not be overwritten if xfRFDuplexType = fixed(2).
            "
        ::= { xfRFIFEntry 17 }

    xfRFDuplexDistance OBJECT-TYPE
        SYNTAX Integer32 (-2147483647..2147483647)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object is aimed to select the duplex distance for the RAU.
            It can only be set if xfRFDuplexConfig = enabled(2), so that:
                 xfRFDuplexDistance = Tx Frequency - Rx Frequency
            Otherwise, it is automatically filled on the basis of Tx and Rx
            frequency settings, and can not be overwritten.
            "
        ::= { xfRFIFEntry 18 }

------------------------------------------------------------------------------
-- xfRFPowerTable
------------------------------------------------------------------------------

    xfRFPowerTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRFPowerEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "
            Table for Radiolink point-to-point radios managed objects.
            Table indexed with ifIndex.
            "
        ::= { xfRadioLinkPtpRadioObjects 3 }

    xfRFPowerEntry OBJECT-TYPE
        SYNTAX XfRFPowerEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRFPowerTable."
        INDEX { ifIndex }
        ::= { xfRFPowerTable 1 }

    XfRFPowerEntry ::=
      SEQUENCE
      {
          xfRFCurrentOutputPower        Integer32,
          xfRFRtpcMinOutputPower        Integer32,
          xfRFRtpcMaxOutputPower        Integer32,
          xfRFRtpcSelectedOutputPower   Integer32,
          xfRFAtpcMinOutputPower        Integer32,
          xfRFAtpcMaxOutputPower        Integer32,
          xfRFAtpcMinInputPowerFar      Integer32,
          xfRFAtpcSelectedInputPowerFar Integer32,
          xfRFAttenuator                Integer32,
          xfRFCurrentInputPower         Integer32,
          xfRFMaxInputPowerLast7Days    Integer32,
          xfRFMinInputPowerLast7Days    Integer32,
          xfRFMaxInputPowerSinceReset   Integer32,
          xfRFMinInputPowerSinceReset   Integer32,
          xfRFInputPowerReset           INTEGER,
          xfRFInputAlarmThreshold       Integer32,
          xfRFOutputPower4QAM           Integer32,
          xfRFOutputPower8QAM           Integer32,
          xfRFOutputPower16QAM          Integer32,
          xfRFOutputPower32QAM          Integer32,
          xfRFOutputPower64QAM          Integer32,
          xfRFOutputPower128QAM         Integer32,
          xfRFOutputPower256QAM         Integer32,
          xfRFOutputPower512QAM         Integer32,
          xfRFAtpcFallbackOutputPower   Integer32,
          xfRFAtpcFallbackEnable        ATPCFallbackEnable,
          xfRFAtpcFallbackTimer         Integer32,
          xfRFOutputPower1024QAM        Integer32,
          xfRFMaxOutputPowerNotLimited  Integer32,
          xfRFMaxOutputPowerNotPossible INTEGER,
          xfRFCurrentInputPowerSdcMain  Integer32,
          xfRFCurrentInputPowerSdcDiv   Integer32,
          xfRFMeanInputPower1m          Integer32,
          xfRFMaxOutputPowerLast7Days   Integer32,
          xfRFMinOutputPowerLast7Days   Integer32,
          xfRFMaxOutputPowerSinceReset  Integer32,
          xfRFMinOutputPowerSinceReset  Integer32,
          xfRFMaxMSELast7Days           Integer32,
          xfRFMinMSELast7Days           Integer32,
          xfRFMaxXPILast7Days           Integer32,
          xfRFMinXPILast7Days           Integer32,
          xfRFOutputPowerReset          INTEGER,
          xfRFBoosterGain               Integer32,
          xfRFBoosterMaxInputPower      Integer32,
          xfRFBoosterCapability         BoosterCapability,
          xfRFBoosterProductNumber      DisplayString,
          xfRFBoosterHWRevision         DisplayString
      }

--
-- xfRFPowerTable MOs
--

    xfRFCurrentOutputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the output power in dBm including attenuator.
            "
        ::= { xfRFPowerEntry 1 }

    xfRFRtpcMinOutputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the minimum output power in dBm including attenuator.
            Value -100 indicate that RAU Tx on is not possible due to power supply limitations.
            "
        ::= { xfRFPowerEntry 2 }

    xfRFRtpcMaxOutputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the maximum output power in dBm including attenuator.
            Value -100 indicate that RAU Tx on is not possible due to power supply limitations.
            "
        ::= { xfRFPowerEntry 3 }

    xfRFRtpcSelectedOutputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..45|254)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object set/shows the selected output power in dBm including attenuator.
            Value 254 indicates that the selected power is set to maximum.
            Default value: 254
            "
        ::= { xfRFPowerEntry 4 }

    xfRFAtpcMinOutputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the minimum output power in dBm in ATPC.
            mode for radio contained in the radio terminal.
            "
        ::= { xfRFPowerEntry 5 }

    xfRFAtpcMaxOutputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..45|254)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object sets/shows the ATPC maximum output power in dBm for radio contained in the radio terminal.
            Value 254 indicates that the power is set to maximum.
            Default value: 254.
            "
        ::= { xfRFPowerEntry 6 }

    xfRFAtpcMinInputPowerFar OBJECT-TYPE
        SYNTAX Integer32 (-99..-30|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows the ATPC minimum input target power level for far end radio.
            "
        ::= { xfRFPowerEntry 7 }

    xfRFAtpcSelectedInputPowerFar OBJECT-TYPE
        SYNTAX Integer32 (-99..-30)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object sets/shows the ATPC selected input target level for far end radio.
            Default value: -30.
            "
        ::= { xfRFPowerEntry 8 }

    xfRFAttenuator OBJECT-TYPE
        SYNTAX Integer32 (0..100)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object sets/shows the value in dBm for fixed attenuator mounted in antenna.
            Default value: 0.
            "
        ::= { xfRFPowerEntry 9 }

    xfRFCurrentInputPower OBJECT-TYPE
        SYNTAX Integer32 (-999..-200)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows RF input level = value/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            "
        ::= { xfRFPowerEntry 10 }

    xfRFMaxInputPowerLast7Days OBJECT-TYPE
        SYNTAX Integer32 (-999..-200|0)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows maximum RF input level last 7 days.
            RF input level = value/10 dBm.
            Domain: [-99.9 ... -20.0 dBm].
            0 (zero) indicates invalid value.
            "
        ::= { xfRFPowerEntry 11 }

    xfRFMinInputPowerLast7Days OBJECT-TYPE
        SYNTAX Integer32 (-999..-200|0)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows minimum RF input level last 7 days.
            RF input level = value/10 dBm.
            Domain: [-99.9 ... -20.0 dBm].
            0 (zero) indicates invalid value.
            "
        ::= { xfRFPowerEntry 12 }

    xfRFMaxInputPowerSinceReset OBJECT-TYPE
        SYNTAX Integer32 (-999..-200)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows maximum RF input level since reset.
            RF input level = value/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            "
        ::= { xfRFPowerEntry 13 }

    xfRFMinInputPowerSinceReset OBJECT-TYPE
        SYNTAX Integer32 (-999..-200)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows minimum RF input level since reset.
            RF input level = value/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            "
        ::= { xfRFPowerEntry 14 }

    xfRFInputPowerReset OBJECT-TYPE
        SYNTAX INTEGER
        {
            inputPowerReset(1)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object reset the registers for the RF input level
            and All Time High level this seven days period and
            counters for the next seven days period of time

            Note. For protected rlMLE and rlXfMLE terminals this
            command will reset both Ra1 and Ra2 values.

            Near end access: read-write
            Far end access: read-write  (Traffic Node only)
            "
        ::= { xfRFPowerEntry 15 }

    xfRFInputAlarmThreshold OBJECT-TYPE
        SYNTAX Integer32 (-99..-30)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object shows RF input level threshold.
            Default value: -93.
            "
        ::= { xfRFPowerEntry 16 }

    xfRFOutputPower4QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 4QAM."
        ::= { xfRFPowerEntry 17 }

    xfRFOutputPower8QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 8QAM."
        ::= { xfRFPowerEntry 18 }

    xfRFOutputPower16QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 16QAM."
        ::= { xfRFPowerEntry 19 }

    xfRFOutputPower32QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 32QAM."
        ::= { xfRFPowerEntry 20 }

    xfRFOutputPower64QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 64QAM."
        ::= { xfRFPowerEntry 21 }

    xfRFOutputPower128QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 128QAM."
        ::= { xfRFPowerEntry 22 }

    xfRFOutputPower256QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 256QAM."
        ::= { xfRFPowerEntry 23 }

    xfRFOutputPower512QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 512QAM."
        ::= { xfRFPowerEntry 24 }

    xfRFAtpcFallbackOutputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..45|254)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object sets maximum output power in dBm in ATPCFallback
            mode for radio contained in the radio terminal.
            Value = 254 indicates that the power is set to maximum.
            Default value: 254.
            "
        ::= { xfRFPowerEntry 25 }

    xfRFAtpcFallbackEnable OBJECT-TYPE
        SYNTAX ATPCFallbackEnable
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Enable/disable ATPCFallback."
        ::= { xfRFPowerEntry 26 }

    xfRFAtpcFallbackTimer OBJECT-TYPE
        SYNTAX Integer32 (1..60)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "ATPC Fallback Timer specifies how long
            the output power can be at PATPC, MAX before
            ATPC fallback is triggered
            Default value: 15 min"
        ::= { xfRFPowerEntry 27 }

    xfRFOutputPower1024QAM OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 1024QAM."
        ::= { xfRFPowerEntry 28 }

    xfRFMaxOutputPowerNotLimited OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Max output power in dBm including
             attenuator that the RAU can give if it is
             not power supply limited."
        ::= { xfRFPowerEntry 29 }

    xfRFMaxOutputPowerNotPossible OBJECT-TYPE
        SYNTAX INTEGER
        {
            unknown(0),
            isPossible(1),
            isNotPossible(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            unknown(0)
            isPossible(1) Max output power is possible due
                          to power supply limitations
            isNotPossible(2) Max output power is not possible
                             due to power supply limitations
            "
        ::= { xfRFPowerEntry 30 }

    xfRFCurrentInputPowerSdcMain OBJECT-TYPE
        SYNTAX Integer32 (-999..-200|0)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "
            This object shows RF input level for SDC Main path = value/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            0 (zero) indicates invalid value (e.g. SDC not available).
            "
        ::= { xfRFPowerEntry 31 }

    xfRFCurrentInputPowerSdcDiv OBJECT-TYPE
        SYNTAX Integer32 (-999..-200|0)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows RF input level for SDC Diversity path = value/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            0 (zero) indicates invalid value (e.g. SDC not available).
            "
        ::= { xfRFPowerEntry 32 }

    xfRFMeanInputPower1m OBJECT-TYPE
        SYNTAX Integer32 (-999..-200|0)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows RF input mean level for last minute.
            RF input level = value/10 dBm.
            Domain: [-99.9 ... -20.0 dBm]
            0 (zero) indicates invalid value.
            "
        ::= { xfRFPowerEntry 33 }

    xfRFMaxOutputPowerLast7Days OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows maximum RF output level last 7 days.
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRFPowerEntry 34 }

    xfRFMinOutputPowerLast7Days OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows minimum RF output level last 7 days.
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRFPowerEntry 35 }

    xfRFMaxOutputPowerSinceReset OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows maximum RF output level since reset
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRFPowerEntry 36 }

    xfRFMinOutputPowerSinceReset OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows minimum RF output level since reset
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRFPowerEntry 37 }

    xfRFMaxMSELast7Days OBJECT-TYPE
        SYNTAX Integer32 (-1000..1000|2000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate Max MSE level last 7 days.
            Input level = value/10 dB.
            Domain: [-100.0 ... 100.0 dB]
            2000 indicates invalid value.
            "
        ::= { xfRFPowerEntry 38 }

    xfRFMinMSELast7Days OBJECT-TYPE
        SYNTAX Integer32 (-1000..1000|2000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate Min MSE level last 7 days.
            Input level = value/10 dB.
            Domain: [-100.0 ... 100.0 dB]
            2000 indicates invalid value.
            "
        ::= { xfRFPowerEntry 39 }

    xfRFMaxXPILast7Days OBJECT-TYPE
        SYNTAX Integer32 (-1000..1000|2000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate Max Cross-Polar Interference (XPI) level last 7 days.
            Input level = value/10 dB.
            Domain: [-100.0 ... 100.0 dB]
            2000 indicates invalid value.
            "
        ::= { xfRFPowerEntry 40 }

    xfRFMinXPILast7Days OBJECT-TYPE
        SYNTAX Integer32 (-1000..1000|2000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate Min Cross-Polar Interference (XPI) level last 7 days.
            Input level = value/10 dB.
            Domain: [-100.0 ... 100.0 dB]
            2000 indicates invalid value.
            "
        ::= { xfRFPowerEntry 41 }

    xfRFOutputPowerReset OBJECT-TYPE
        SYNTAX INTEGER { outputPowerReset(1) }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object reset the registers for the RF output level
            and All Time High level this seven days period and
            counters for the next seven days period of time.
            "
        ::= { xfRFPowerEntry 42 }

    xfRFBoosterGain OBJECT-TYPE
        SYNTAX Integer32 ( 0..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Value of the Gain of the Booster
            "
        ::= { xfRFPowerEntry 43 }

    xfRFBoosterMaxInputPower OBJECT-TYPE
        SYNTAX Integer32 (-100..35|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Value of the Max Input Power admitted towards the Booster
            "
        ::= { xfRFPowerEntry 44 }

    xfRFBoosterCapability OBJECT-TYPE
        SYNTAX BoosterCapability
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Value of Booster capability according to the system
            "
        ::= { xfRFPowerEntry 45 }

    xfRFBoosterProductNumber OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..20))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "
            Product Number of the Booster connected to the specific RF IF
            "
        ::= {  xfRFPowerEntry 46 }

    xfRFBoosterHWRevision OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..20))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "
            HW Revision of the Booster connected to the specific RF IF
            "
        ::= {  xfRFPowerEntry 47 }

------------------------------------------------------------------------------
-- xfRAUCapabilityTable
------------------------------------------------------------------------------

    xfRAUCapabilityTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRAUCapabilityEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "
            Table for RAU capability information.
            Table indexed with entPhysicalIndex and xfTermRowIndex.
            "
        ::= { xfRadioLinkPtpRadioObjects 4 }

    xfRAUCapabilityEntry OBJECT-TYPE
        SYNTAX XfRAUCapabilityEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in xfRAUCapabilityTable."
        INDEX { entPhysicalIndex, xfTermRowIndex }
        ::= { xfRAUCapabilityTable 1 }

    XfRAUCapabilityEntry ::=
        SEQUENCE
        {
            xfRAUChannelSpacing          RAUChannelSpacingCapability,
            xfRAUChannelModulation       RAUModulation,
            xfRAUSpectrumEfficiencyClass RauSec,
            xfRAUCarrierMode             INTEGER
        }

--
-- xfRAUCapabilityTable MOs
--

    xfRAUChannelSpacing OBJECT-TYPE
        SYNTAX RAUChannelSpacingCapability
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Channel spacing.
            ETSI: 3.5, 7, 14, 28, 40, 56 MHz
            ANSI: 10, 20, 30, 40, 50 MHz
            "
        ::= { xfRAUCapabilityEntry 1 }

    xfRAUChannelModulation OBJECT-TYPE
        SYNTAX RAUModulation
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows the modulation.
            Values:
              cqpsk(2)    CQPSK
              qam16(3)    16-QAM
              qam128(4)   128-QAM
              qam32(5)    32-QAM
              qam64(6)    64-QAM
              qam4(7)     4-QAM
              qam8(8)     8-QAM
              qam256(9)   256-QAM
              qam512(10)  512-QAM
              qam1024(11) 1024-QAM
            "
        ::= { xfRAUCapabilityEntry 2 }

    xfRAUSpectrumEfficiencyClass OBJECT-TYPE
        SYNTAX RauSec
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Spectrum Efficiency Class:
              other(1), unknown
              sec2(2),  Spectrum eff. Class 2
              sec3(3),  Spectrum eff. Class 3
              sec4L(4), Spectrum eff. Class 4L
              sec4H(5), Specturm eff. Class 4H
              sec5A(6), Spectrum eff. Class 5A
              sec5B(7), Spectrum eff. Class 5B
              sec6A(8), Spectrum eff. Class 6A
              sec6B(9)  Spectrum eff. Class 6B
            "
        ::= { xfRAUCapabilityEntry 3 }

    xfRAUCarrierMode OBJECT-TYPE
        SYNTAX INTEGER
        {
            singleCarrier(1),
            xpicDualCarrier(2),
            mimoMultiCarrier(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Radio carrier mode.
            "
        ::= { xfRAUCapabilityEntry 4 }

------------------------------------------------------------------------------
-- xfRAUSubBandTable
------------------------------------------------------------------------------

    xfRAUSubBandTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRAUSubBandEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "
            Table for RAU Sub-Band index capability.
            Table indexed with entPhysicalIndex and xfRAUSubBandIndex.
            "
        ::= { xfRadioLinkPtpRadioObjects 5 }

    xfRAUSubBandEntry OBJECT-TYPE
        SYNTAX XfRAUSubBandEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in xfRAUSubBandTable."
        INDEX { entPhysicalIndex, xfRAUSubBandIndex }
        ::= { xfRAUSubBandTable 1 }

    XfRAUSubBandEntry ::=
        SEQUENCE
        {
            xfRAUSubBandIndex Unsigned32,
            xfRAUSubBandRange Unsigned32
        }

--
-- xfRAUSubBandTable MOs
--

    xfRAUSubBandIndex OBJECT-TYPE
        SYNTAX Unsigned32 (1..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "An index for the specific RAU Sub-Band available index range."
        ::= { xfRAUSubBandEntry 1 }

    xfRAUSubBandRange OBJECT-TYPE
        SYNTAX Unsigned32 (0..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows the RAU Sub-Band available index range [0..255]."
        ::= { xfRAUSubBandEntry 2 }

------------------------------------------------------------------------------
-- xfRFSpectrumDiagTable
------------------------------------------------------------------------------

    xfRFSpectrumDiagTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRFSpectrumDiagEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table for RF Spectrum Diagnostics control and status"
        ::= { xfRadioLinkPtpRadioObjects 6 }

    xfRFSpectrumDiagEntry OBJECT-TYPE
        SYNTAX XfRFSpectrumDiagEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in xfRFSpectrumDiagTable"
        INDEX { ifIndex }
        ::= { xfRFSpectrumDiagTable 1 }

    XfRFSpectrumDiagEntry ::=
        SEQUENCE
        {
            xfRFSpectrumDiagAdminStatus         INTEGER,
            xfRFSpectrumDiagOperStatus          INTEGER,
            xfRFSpectrumDiagChannelScanEstTime  Unsigned32,
            xfRFSpectrumDiagSubBandScanEstTime  Unsigned32,
            xfRFSpectrumDiagScanDate            DisplayString,
            xfRFSpectrumDiagChannelSpacing      Unsigned32,
            xfRFSpectrumDiagCurrRxFrequency     Unsigned32,
            xfRFSpectrumDiagMinRxFrequency      Unsigned32,
            xfRFSpectrumDiagMaxRxFrequency      Unsigned32,
            xfRFSpectrumDiagIdxCompanion1       Unsigned32,
            xfRFSpectrumDiagIdxCompanion2       Unsigned32,
            xfRFSpectrumDiagIdxCompanion3       Unsigned32,
            xfRFSpectrumDiagProgress            Unsigned32
        }

--
-- xfRFSpectrumDiagTable MOs
--

    xfRFSpectrumDiagAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            channelScanStart(2),
            subBandScanStart(3),
            scanStop(255)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "RF Spectrum Diagnostics Admin Status"
        ::= { xfRFSpectrumDiagEntry 1 }

    xfRFSpectrumDiagOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            scanNotStarted(0),
            subBandScanOngoing(1),
            channelScanOngoing(2),
            scanCanceled(3),
            subBandScanFinished(4),
            channelScanFinished(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "RF Spectrum Diagnostics Oper Status"
        ::= { xfRFSpectrumDiagEntry 2 }

    xfRFSpectrumDiagChannelScanEstTime OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Estimated time in seconds for scanning one
             Channel Spacing at current RX frequency"
        ::= { xfRFSpectrumDiagEntry 3 }

    xfRFSpectrumDiagSubBandScanEstTime OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Estimated time in seconds for scanning
             full Sub Band of connected RAU"
        ::= { xfRFSpectrumDiagEntry 4 }

    xfRFSpectrumDiagScanDate OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..32))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Date and time when scan (channel or sub-band) is completed,
             format: [YYYY]-[MM]-[DD]T[hh]:[mm]:[ss]"
        ::= { xfRFSpectrumDiagEntry 5 }

    xfRFSpectrumDiagChannelSpacing OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Channel width measured by Spectrum Diagnostics"
        ::= { xfRFSpectrumDiagEntry 6 }

    xfRFSpectrumDiagCurrRxFrequency OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Current value of Rx frequency"
        ::= { xfRFSpectrumDiagEntry 7 }

    xfRFSpectrumDiagMinRxFrequency OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Minimum sub-band Rx frequency (RAU lower edge)"
        ::= { xfRFSpectrumDiagEntry 8 }

    xfRFSpectrumDiagMaxRxFrequency OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum sub-band Rx frequency (RAU upper edge)"
        ::= { xfRFSpectrumDiagEntry 9 }

    xfRFSpectrumDiagIdxCompanion1 OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "RF IF index for 1st companion carrier (0 if no companion)"
        ::= { xfRFSpectrumDiagEntry 10 }

    xfRFSpectrumDiagIdxCompanion2 OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "RF IF index for 2nd companion carrier (0 if no companion)"
        ::= { xfRFSpectrumDiagEntry 11 }

    xfRFSpectrumDiagIdxCompanion3 OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "RF IF index for 3rd companion carrier (0 if no companion)"
        ::= { xfRFSpectrumDiagEntry 12 }

    xfRFSpectrumDiagProgress OBJECT-TYPE
        SYNTAX Unsigned32 (0..100)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Completed percentage of Spectrum Diagnostics scan"
        ::= { xfRFSpectrumDiagEntry 13 }

------------------------------------------------------------------------------
-- xfRFSpectrumDiagResultTable
------------------------------------------------------------------------------

    xfRFSpectrumDiagResultTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRFSpectrumDiagResultEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table of Spectrum Diagnostics scan results"
        ::= { xfRadioLinkPtpRadioObjects 7 }

    xfRFSpectrumDiagResultEntry OBJECT-TYPE
        SYNTAX XfRFSpectrumDiagResultEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in xfRFSpectrumDiagResultTable"
        INDEX { ifIndex, xfRFSpectrumDiagResultIndex }
        ::= { xfRFSpectrumDiagResultTable 1 }

    XfRFSpectrumDiagResultEntry ::=
        SEQUENCE
        {
            xfRFSpectrumDiagResultIndex        Unsigned32,
            xfRFSpectrumDiagResultRxFrequency  Unsigned32,
            xfRFSpectrumDiagResultRxPower      Integer32
        }

--
-- xfRFSpectrumDiagResultTable MOs
--

    xfRFSpectrumDiagResultIndex OBJECT-TYPE
      SYNTAX Unsigned32 (0..4294967295)
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "Spectrum Diagnostics Scan Result Index"
        ::= { xfRFSpectrumDiagResultEntry 1 }

    xfRFSpectrumDiagResultRxFrequency OBJECT-TYPE
        SYNTAX Unsigned32 (0..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Spectrum Diagnostics Scan Result Rx frequency in kHz"
        ::= { xfRFSpectrumDiagResultEntry 2 }

    xfRFSpectrumDiagResultRxPower OBJECT-TYPE
        SYNTAX Integer32 (-999..-200)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Spectrum Diagnostics Scan Result Rx Power
            value/10 dBm
            Domain: [-99.9 .. -20.0 dBm]"
        ::= { xfRFSpectrumDiagResultEntry 3 }

------------------------------------------------------------------------------
-- xfRfIfPowerTable
------------------------------------------------------------------------------

    xfRfIfPowerTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRfIfPowerEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "
            Table for Radio Link RAU managed objects.
            Table indexed with ifIndex.
            "
        ::= { xfRadioLinkPtpRadioObjects 8 }

    xfRfIfPowerEntry OBJECT-TYPE
        SYNTAX XfRfIfPowerEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRfIfPowerTable."
        INDEX { ifIndex }
        ::= { xfRfIfPowerTable 1 }

    XfRfIfPowerEntry ::=
      SEQUENCE
      {
          xfRfSelectedMinOutputPower    RfOutputPower,
          xfRfSelectedMaxOutputPower    RfOutputPower,
          xfRfCurrentOutputPower        RfOutputPower,
          xfRfMinOutputPower            RfOutputPower,
          xfRfMaxOutputPower            RfOutputPower,
          xfRfAtpcTargetInputPowerFE    Integer32,
          xfRfCurrentInputPower         RfInputPower,
          xfRfMaxInputPowerLast7Days    RfInputPower,
          xfRfMinInputPowerLast7Days    RfInputPower,
          xfRfMaxInputPowerSinceReset   RfInputPower,
          xfRfMinInputPowerSinceReset   RfInputPower,
          xfRfInputPowerReset           INTEGER,
          xfRfInputAlarmThreshold       Integer32,
          xfRfOutputPower4QAM           RfOutputPower,
          xfRfOutputPower16QAM          RfOutputPower,
          xfRfOutputPower32QAM          RfOutputPower,
          xfRfOutputPower64QAM          RfOutputPower,
          xfRfOutputPower128QAM         RfOutputPower,
          xfRfOutputPower256QAM         RfOutputPower,
          xfRfOutputPower512QAM         RfOutputPower,
          xfRfOutputPower1024QAM        RfOutputPower,
          xfRfOutputPower2048QAM        RfOutputPower,
          xfRfOutputPower4096QAM        RfOutputPower,
          xfRfMaxOutputPowerNotLimited  RfOutputPower,
          xfRfMaxOutputPowerPossible    INTEGER,
          xfRfMeanInputPower1m          Integer32,
          xfRfMaxOutputPowerLast7Days   Integer32,
          xfRfMinOutputPowerLast7Days   Integer32,
          xfRfMaxOutputPowerSinceReset  Integer32,
          xfRfMinOutputPowerSinceReset  Integer32,
          xfRfOutputPowerReset          INTEGER,
          xfRfAvailableOutputPowerType  INTEGER,
          xfRfSelectedOutputPowerType   INTEGER,
          xfRfTaps                      INTEGER,
          xfRfCurrentInputPowerSdcMain  RfInputPower,
          xfRfCurrentInputPowerSdcDiv   RfInputPower,
          xfRfOutputPower8192QAM        RfOutputPower,
          xfRfOutputPower16384QAM       RfOutputPower,
          xfRfAtpcFallbackOutputPower   RfOutputPower,
          xfRfAtpcFallbackEnable        ATPCFallbackEnable,
          xfRfAtpcFallbackTimer         Integer32
      }

--
-- xfRfIfPowerTable MOs
--

    xfRfSelectedMinOutputPower OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            Minimum output power in dBm (selected by operator).
            Default value: 10 dBm.
            "
        ::= { xfRfIfPowerEntry 1 }

    xfRfSelectedMaxOutputPower OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            Maximum output power in dBm (selected by operator).
            Default value: 10 dBm.
            "
        ::= { xfRfIfPowerEntry 2 }

    xfRfCurrentOutputPower OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Current output power in dBm.
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 3 }

    xfRfMinOutputPower OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Minimum output power in dBm (provided by RAU).
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 4 }

    xfRfMaxOutputPower OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Maximum output power in dBm (provided by RAU).
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 5 }

    xfRfAtpcTargetInputPowerFE OBJECT-TYPE
        SYNTAX Integer32 (-99..-30)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            ATPC target input power on Far End side.
            Default value: -30.
            "
        ::= { xfRfIfPowerEntry 6 }

    xfRfCurrentInputPower OBJECT-TYPE
        SYNTAX RfInputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            RF input level.
            Value is in 1/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            "
        ::= { xfRfIfPowerEntry 7 }

    xfRfMaxInputPowerLast7Days OBJECT-TYPE
        SYNTAX RfInputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Maximum RF input level in the last 7 days.
            Value is in 1/10 dBm.
            Domain: [-99.9 ... -20.0 dBm].
            0 (zero) indicates an invalid value.
            "
        ::= { xfRfIfPowerEntry 8 }

    xfRfMinInputPowerLast7Days OBJECT-TYPE
        SYNTAX RfInputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Minimum RF input level in the last 7 days.
            Value is in 1/10 dBm.
            Domain: [-99.9 ... -20.0 dBm].
            0 (zero) indicates an invalid value.
            "
        ::= { xfRfIfPowerEntry 9 }

    xfRfMaxInputPowerSinceReset OBJECT-TYPE
        SYNTAX RfInputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Maximum RF input level since reset.
            Value is in 1/10 dBm.
            Domain: [-99.9 ... -20.0 dBm].
            0 (zero) indicates an invalid value.
            "
        ::= { xfRfIfPowerEntry 10 }

    xfRfMinInputPowerSinceReset OBJECT-TYPE
        SYNTAX RfInputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Minimum RF input level since reset.
            Value is in 1/10 dBm.
            Domain: [-99.9 ... -20.0 dBm].
            0 (zero) indicates an invalid value.
            "
        ::= { xfRfIfPowerEntry 11 }

    xfRfInputPowerReset OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            inputPowerNoReset(2),
            inputPowerReset(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object resets the registers for:
            - RF input power levels
            - input levels (i.e. RF power, MSE and XPI) in the next 7 days period of time.
            "
        ::= { xfRfIfPowerEntry 12 }

    xfRfInputAlarmThreshold OBJECT-TYPE
        SYNTAX Integer32 (-99..-30)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            RF input level threshold.
            Default value: -93.
            "
        ::= { xfRfIfPowerEntry 13 }

    xfRfOutputPower4QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 4QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 14 }

    xfRfOutputPower16QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 16QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 15 }

    xfRfOutputPower32QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 32QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 16 }

    xfRfOutputPower64QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 64QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 17 }

    xfRfOutputPower128QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 128QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 18 }

    xfRfOutputPower256QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 256QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 19 }

    xfRfOutputPower512QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 512QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 20 }

    xfRfOutputPower1024QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 1024QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 21 }

    xfRfOutputPower2048QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 2048QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 22 }

    xfRfOutputPower4096QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 4096QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 23 }

    xfRfMaxOutputPowerNotLimited OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Max output power in dBm that the RAU can give
            if it is not power supply limited.
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 24 }

    xfRfMaxOutputPowerPossible OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            possible(2),
            notPossible(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            possible(2): max output power is possible.
            notPossible(3): max output power is not possible, due to power supply limitations.
            "
        ::= { xfRfIfPowerEntry 25 }

    xfRfMeanInputPower1m OBJECT-TYPE
        SYNTAX Integer32 (-999..-200|0)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows RF input mean level for last minute.
            RF input level = value/10 dBm.
            Domain: [-99.9 ... -20.0 dBm]
            0 (zero) indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 26 }

    xfRfMaxOutputPowerLast7Days OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows maximum RF output level last 7 days.
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 27 }

    xfRfMinOutputPowerLast7Days OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows minimum RF output level last 7 days.
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 28 }

    xfRfMaxOutputPowerSinceReset OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows maximum RF output level since reset
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 29 }

    xfRfMinOutputPowerSinceReset OBJECT-TYPE
        SYNTAX Integer32 (-100..45|255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows minimum RF output level since reset
            RF output level = value dBm.
            Domain: [-100 ... 45 dBm]
            255 indicates invalid value.
            "
        ::= { xfRfIfPowerEntry 30 }

    xfRfOutputPowerReset OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            outputPowerNoReset(2),
            outputPowerReset(3)
        }

        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object reset the registers for the RF output level
            and All Time High level this seven days period and
            counters for the next seven days period of time.
            "
        ::= { xfRfIfPowerEntry 31 }

    xfRfAvailableOutputPowerType OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            standardPower(2),
            highPower(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object reports the output power capability of the RAU:
            - standardPower
            - highPower
           "
        ::= { xfRfIfPowerEntry 32 }

    xfRfSelectedOutputPowerType OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            standardPower(2),
            highPower(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object allows setting the output power type:
            - standardPower
            - highPower
            default: standardPower(2)
            When the type is set to highPower(3) a HP license key is required.
            If the license key is not present the capacity is limited to Basic Capacity.
            The output power can be configured as 'normal' without any impact from the HP license key (present or not).
            When the mode is standardPower(2) the availableMaxOutputPower is limited to 'max power' - 4 dB per modulation.
            "
        ::= { xfRfIfPowerEntry 33 }

    xfRfTaps OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enabled(2),
            disabled(3),
            notAvailable(4)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object allows setting the Traffic Aware Power Saving.
            Default: disabled(3)
            "
        ::= { xfRfIfPowerEntry 34 }

    xfRfCurrentInputPowerSdcMain OBJECT-TYPE
        SYNTAX RfInputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows RF input level for SDC Main path = value/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            0 (zero) indicates invalid value (e.g. SDC not available).
            "
        ::= { xfRfIfPowerEntry 35 }

    xfRfCurrentInputPowerSdcDiv OBJECT-TYPE
        SYNTAX RfInputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object shows RF input level for SDC Diversity path = value/10 dBm.
            Domain: [-20.0 .. -99.9 dBm].
            0 (zero) indicates invalid value (e.g. SDC not available).
            "
        ::= { xfRfIfPowerEntry 36 }

    xfRfOutputPower8192QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 8192QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 37 }

    xfRfOutputPower16384QAM OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Output power for 16384QAM.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 38 }

    xfRfAtpcFallbackOutputPower OBJECT-TYPE
        SYNTAX RfOutputPower
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This object sets output power (in dBm) in ATPCFallback mode,
            for radio contained in the Carrier Termination.
            255 indicates invalid value."
        ::= { xfRfIfPowerEntry 39 }

    xfRfAtpcFallbackEnable OBJECT-TYPE
        SYNTAX ATPCFallbackEnable
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Enable/disable ATPCFallback."
        ::= { xfRfIfPowerEntry 40 }

    xfRfAtpcFallbackTimer OBJECT-TYPE
        SYNTAX Integer32 (1..60)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This object specifies how long the output power
            can be at (ATPC, MAX) before ATPC fallback is triggered.
            Default value: ETSI 15 min, ANSI 5 min."
        ::= { xfRfIfPowerEntry 41 }

------------------------------------------------------------------------------
-- xfRFIFCableMonitoringTable
------------------------------------------------------------------------------

    xfRFIFCableMonitoringTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRFIFCableMonitoringEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "
            Table for Radiolink point-to-point radios RF IF Cable Monitoring managed objects.
            Table indexed with ifIndex.
            "
        ::= { xfRadioLinkPtpRadioObjects 9 }

    xfRFIFCableMonitoringEntry OBJECT-TYPE
        SYNTAX XfRFIFCableMonitoringEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRFIFCableMonitoringTable."
        INDEX { ifIndex }
        ::= { xfRFIFCableMonitoringTable 1 }

    XfRFIFCableMonitoringEntry ::=
        SEQUENCE
        {
            xfRFIFCMStatus          INTEGER,
            xfRFOutlierAgc          INTEGER,
            xfRFOutlierSetTh        Unsigned32,
            xfRFOutlierCeaseTh      Unsigned32,
            xfRFRangeAgc            INTEGER,
            xfRFRangeSetTh          Unsigned32,
            xfRFRangeCeaseTh        Unsigned32,
            xfRFStddevAgc           INTEGER,
            xfRFStddevSetTh         Unsigned32,
            xfRFStddevCeaseTh       Unsigned32,
            xfRFDegradationAgc      INTEGER,
            xfRFDegradationSetTh    Unsigned32,
            xfRFDegradationCeaseTh  Unsigned32,
            xfRFMarginAgc           INTEGER,
            xfRFMarginSetTh         Unsigned32,
            xfRFMarginCeaseTh       Unsigned32,
      xfRFOutlierValue        Integer32,
      xfRFRangeValue          Integer32,
      xfRFStddevValue         Integer32,
      xfRFDegradationValue    Integer32,
      xfRFMarginValue         Integer32,
      xfRFOutlierTrigger      INTEGER,
      xfRFRangeTrigger        INTEGER,
      xfRFStddevTrigger       INTEGER,
      xfRFDegradationTrigger  INTEGER,
      xfRFMarginTrigger       INTEGER

        }

--
-- xfRFIFCableMonitoringTable MOs
--

  xfRFIFCMStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disable(2),
            enable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Monitoring Status.
            Default value: disable(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 1 }

  xfRFOutlierAgc OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disable(2),
            enable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Outlier Alarm.
            Default value: disable(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 2 }

  xfRFOutlierSetTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Set Threshold for Outlier Alarm.
            3 = Default value (0.3).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 3
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 3 }

  xfRFOutlierCeaseTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Cease Threshold for Outlier Alarm.
            2 = Default value (0.2).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 2
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 4 }

  xfRFRangeAgc OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disable(2),
            enable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Range Alarm.
            Default value: disable(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 5 }

  xfRFRangeSetTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Set Threshold for Range Alarm.
            30 = Default value (3).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 30 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 6 }

  xfRFRangeCeaseTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Cease Threshold for Range Alarm.
            20 = Default value (2).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 20 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 7 }

  xfRFStddevAgc OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disable(2),
            enable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Stddev Alarm.
            Default value: disable(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 8 }

  xfRFStddevSetTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Set Threshold for Stddev Alarm.
            50 = Default value (5).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 50 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 9 }

  xfRFStddevCeaseTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Cease Threshold for Stddev Alarm.
            20 = Default value (2).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 20 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 10 }

    xfRFDegradationAgc OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disable(2),
            enable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Degradation Alarm.
            Default value: disable(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 11 }

  xfRFDegradationSetTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Set Threshold for Degradation Alarm.
            2 = Default value (0.2).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 2 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 12 }

  xfRFDegradationCeaseTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Cease Threshold for Degradation Alarm.
            1 = Default value (0.1).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 1 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 13 }

    xfRFMarginAgc OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disable(2),
            enable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Margin Alarm.
            Default value: disable(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 14 }

  xfRFMarginSetTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Set Threshold for Margin Alarm.
            30 = Default value (3).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 30 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 15 }

  xfRFMarginCeaseTh OBJECT-TYPE
        SYNTAX Unsigned32 (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object handles Cease Threshold for Margin Alarm.
            60 = Default value (6).
            - To calculate threshold use the following formula: SetTh/10.
            Default value: 60 (dB/10)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 16 }

  xfRFOutlierValue OBJECT-TYPE
        SYNTAX Integer32 (-2147483647..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object handles the value calculated on 24h for Outlier Alarm.
            0 = Default value (0).
            - To calculate value use the following formula: Value/100.
            Default value: 0
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 17 }

  xfRFRangeValue OBJECT-TYPE
        SYNTAX Integer32 (-2147483647..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object handles the value calculated on 24h for Range Alarm.
            0 = Default value (0).
            - To calculate value use the following formula: Value/100.
            Default value: 0 (dB/100)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 18 }

  xfRFStddevValue OBJECT-TYPE
        SYNTAX Integer32 (-2147483647..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object handles the value calculated on 24h for Stddev Alarm.
            0 = Default value (0).
            - To calculate value use the following formula: Value/100.
            Default value: 0 (dB/100)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 19 }

  xfRFDegradationValue OBJECT-TYPE
        SYNTAX Integer32 (-2147483647..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object handles the value calculated on 24h for Degradation Alarm.
            0 = Default value (0).
            - To calculate value use the following formula: Value/100.
            Default value: 0 (dB/100)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 20 }

  xfRFMarginValue OBJECT-TYPE
        SYNTAX Integer32 (-2147483647..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object handles the value calculated on 24h for Margin Alarm.
            0 = Default value (0).
            - To calculate value use the following formula: Value/100.
            Default value: 0 (dB/100)
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 21 }

   xfRFOutlierTrigger OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noSetThreshold(2),
            setThreshold(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Outlier Trigger.
            Default value: noSetThreshold(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 22 }

  xfRFRangeTrigger OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noSetThreshold(2),
            setThreshold(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Range Trigger.
            Default value: noSetThreshold(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 23 }

   xfRFStddevTrigger OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noSetThreshold(2),
            setThreshold(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Stddev Trigger.
            Default value: noSetThreshold(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 24 }

   xfRFDegradationTrigger OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noSetThreshold(2),
            setThreshold(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Degradation Trigger.
            Default value: noSetThreshold(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 25 }

   xfRFMarginTrigger OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noSetThreshold(2),
            setThreshold(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object manage IfCable Margin Trigger.
            Default value: noSetThreshold(2).
            Near end access: read-write.
            Far end access: no access.
            "
        ::= { xfRFIFCableMonitoringEntry 26 }

------------------------------------------------------------------------------
-- xfSdcTable
------------------------------------------------------------------------------
    xfSdcTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfSdcEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table for SDC capabilities, setting and status."
        ::= { xfRadioLinkPtpRadioObjects 10 }

    xfSdcEntry OBJECT-TYPE
        SYNTAX XfSdcEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfSdcTable."
        INDEX { entPhysicalIndex }
        ::= { xfSdcTable 1 }

    XfSdcEntry ::=
        SEQUENCE
        {
            xfSdcCapability               INTEGER,
            xfSdcAdminStatus              INTEGER,
            xfSdcOperStatus               INTEGER,
            xfSdcDadeControl              INTEGER,
            xfSdcDadeStatus               INTEGER,
            xfSdcPath                     INTEGER,
            xfSdcOduDateTimeCalibration   DisplayString,
            xfSdcOduSerialNumber          DisplayString,
            xfSdcGain                     Integer32,
            xfSdcActualPath               INTEGER,
            xfSdcDadeDelay                Integer32
        }

--
-- xfSdcTable MOs
--

    xfSdcCapability OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            sdcSupported(2),
            sdcNotSupported(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SDC capability, including both MMU and ODU."
        ::= { xfSdcEntry 1 }

    xfSdcAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            sdcEnabled(2),
            sdcDisabled(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "SDC Admin Status."
        ::= { xfSdcEntry 2 }

    xfSdcOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            sdcEnabled(2),
            sdcDisabled(3),
            sdcInProgress(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SDC Oper Status."
        ::= { xfSdcEntry 3 }

    xfSdcDadeControl OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            sdcDadeStart(2),
            sdcDadeAbort(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "SDC DADE procedure control."
        ::= { xfSdcEntry 4 }

    xfSdcDadeStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            sdcCalibrated(2),
            sdcNotCalibrated(3),
            sdcCalInProgress(4),
            sdcCalMismatch(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SDC DADE procedure status."
        ::= { xfSdcEntry 5 }

    xfSdcPath OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            sdcAuto(2),
            sdcMain(3),
            sdcDiv(4)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "SDC selected path (desired value)."
        ::= { xfSdcEntry 6 }

    xfSdcOduDateTimeCalibration OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..255))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Date and time of the SDC DADE calibration for the ODU with serial number in xfSdcOduSerialNumber.
             Format: [YYYY]-[MM]-[DD]T[hh]:[mm]:[ss] (ISO 8601)."
        ::= { xfSdcEntry 7 }

    xfSdcOduSerialNumber OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..255))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Serial number of the ODU the current value of xfSdcOduDateTimeCalibration is referred to."
        ::= { xfSdcEntry 8 }

    xfSdcGain OBJECT-TYPE
        SYNTAX Integer32 (0..30)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            SDC gain in dB/10.
            Domain: [0.0 .. 3.0 dB].
            "
        ::= { xfSdcEntry 9 }

    xfSdcActualPath OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            sdcAuto(2),
            sdcMain(3),
            sdcDiv(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SDC actual path (current value)."
        ::= { xfSdcEntry 10 }

    xfSdcDadeDelay OBJECT-TYPE
        SYNTAX Integer32 (-2147483647..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            DADE delay in nsec.
            "
        ::= { xfSdcEntry 11 }

--
-- Conformance
--

    xfRadioLinkPtpRadioCompliances OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioConformance 1 }
    xfRadioLinkPtpRadioGroups      OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioConformance 2 }

    xfRADIOLINKPTPRADIOFullCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
            "The compliance statement for SNMP entities which implement everything."
        MODULE -- This Module
        MANDATORY-GROUPS { xfRadioLinkPtpRadioCompleteGroup }
        ::= { xfRadioLinkPtpRadioCompliances 1 }

    xfRadioLinkPtpRadioCompleteGroup OBJECT-GROUP
        OBJECTS
        {
            xfRAUAlarmStatus,
            xfRAURfLoopAvailable,
            xfRAUAtpcCapability,
            xfRAULocalCtrlCapability,
            xfRAUModCapability,
            xfRAUFrequencyband,
            xfRAUSubBand,
            xfRAUTemperature,
            xfRAUProtectionPath,
            xfRAURxCapability,
            xfRAUNotes,
            xfRauAtpcVersion,
            xfRauBoosterCapability,
            xfRauBoosterSelectedIndex,
            xfRFBaseTxFrequency,
            xfRFBaseRxFrequency,
            xfRFStepSize,
            xfRFStepLimitLow,
            xfRFStepLimitHigh,
            xfRFCurrentStepNumber,
            xfRFTxOperStatus,
            xfRFTxAdminStatus,
            xfRFLoopEnable,
            xfRFAlarms,
            xfRFStatus,
            xfRFStepSizeRx,
            xfRFStepLimitLowRx,
            xfRFStepLimitHighRx,
            xfRFCurrentStepNumberRx,
            xfRFDuplexType,
            xfRFDuplexConfig,
            xfRFDuplexDistance,
            xfRFCurrentOutputPower,
            xfRFRtpcMinOutputPower,
            xfRFRtpcMaxOutputPower,
            xfRFRtpcSelectedOutputPower,
            xfRFAtpcMinOutputPower,
            xfRFAtpcMaxOutputPower,
            xfRFAtpcMinInputPowerFar,
            xfRFAtpcSelectedInputPowerFar,
            xfRFAttenuator,
            xfRFCurrentInputPower,
            xfRFMaxInputPowerLast7Days,
            xfRFMinInputPowerLast7Days,
            xfRFMaxInputPowerSinceReset,
            xfRFMinInputPowerSinceReset,
            xfRFInputPowerReset,
            xfRFInputAlarmThreshold,
            xfRAUChannelSpacing,
            xfRAUChannelModulation,
            xfRAUSpectrumEfficiencyClass,
            xfRAUCarrierMode,
            xfRFOutputPower4QAM,
            xfRFOutputPower8QAM,
            xfRFOutputPower16QAM,
            xfRFOutputPower32QAM,
            xfRFOutputPower64QAM,
            xfRFOutputPower128QAM,
            xfRFOutputPower256QAM,
            xfRFOutputPower512QAM,
            xfRFAtpcFallbackOutputPower,
            xfRFAtpcFallbackEnable,
            xfRFAtpcFallbackTimer,
            xfRFOutputPower1024QAM,
            xfRFMaxOutputPowerNotLimited,
            xfRFMaxOutputPowerNotPossible,
            xfRFCurrentInputPowerSdcMain,
            xfRFCurrentInputPowerSdcDiv,
            xfRAUSubBandIndex,
            xfRAUSubBandRange,
            xfRFMeanInputPower1m,
            xfRFMaxOutputPowerLast7Days,
            xfRFMinOutputPowerLast7Days,
            xfRFMaxOutputPowerSinceReset,
            xfRFMinOutputPowerSinceReset,
            xfRFMaxMSELast7Days,
            xfRFMinMSELast7Days,
            xfRFMaxXPILast7Days,
            xfRFMinXPILast7Days,
            xfRFOutputPowerReset,
            xfRfAvailableOutputPowerType,
            xfRfSelectedOutputPowerType,
            xfRfTaps,
            xfRfSelectedMinOutputPower,
            xfRfSelectedMaxOutputPower,
            xfRfCurrentOutputPower,
            xfRfMinOutputPower,
            xfRfMaxOutputPower,
            xfRfAtpcTargetInputPowerFE,
            xfRfCurrentInputPower,
            xfRfMaxInputPowerLast7Days,
            xfRfMinInputPowerLast7Days,
            xfRfMaxInputPowerSinceReset,
            xfRfMinInputPowerSinceReset,
            xfRfInputPowerReset,
            xfRfInputAlarmThreshold,
            xfRfOutputPower4QAM,
            xfRfOutputPower16QAM,
            xfRfOutputPower32QAM,
            xfRfOutputPower64QAM,
            xfRfOutputPower128QAM,
            xfRfOutputPower256QAM,
            xfRfOutputPower512QAM,
            xfRfOutputPower1024QAM,
            xfRfOutputPower2048QAM,
            xfRfOutputPower4096QAM,
            xfRfOutputPower8192QAM,
            xfRfOutputPower16384QAM,
            xfRfAtpcFallbackOutputPower,
            xfRfAtpcFallbackEnable,
            xfRfAtpcFallbackTimer,
            xfRfMaxOutputPowerNotLimited,
            xfRfMaxOutputPowerPossible,
            xfRfMeanInputPower1m,
            xfRfMaxOutputPowerLast7Days,
            xfRfMinOutputPowerLast7Days,
            xfRfMaxOutputPowerSinceReset,
            xfRfMinOutputPowerSinceReset,
            xfRfOutputPowerReset,
            xfRFSpectrumDiagAdminStatus,
            xfRFSpectrumDiagOperStatus,
            xfRFSpectrumDiagChannelScanEstTime,
            xfRFSpectrumDiagSubBandScanEstTime,
            xfRFSpectrumDiagScanDate,
            xfRFSpectrumDiagChannelSpacing,
            xfRFSpectrumDiagCurrRxFrequency,
            xfRFSpectrumDiagMinRxFrequency,
            xfRFSpectrumDiagMaxRxFrequency,
            xfRFSpectrumDiagIdxCompanion1,
            xfRFSpectrumDiagIdxCompanion2,
            xfRFSpectrumDiagIdxCompanion3,
            xfRFSpectrumDiagProgress,
            xfRFSpectrumDiagResultIndex,
            xfRFSpectrumDiagResultRxFrequency,
            xfRFSpectrumDiagResultRxPower,
            xfRFBoosterGain,
            xfRFBoosterMaxInputPower,
            xfRFBoosterCapability,
            xfRFBoosterProductNumber,
            xfRFBoosterHWRevision,
            xfRFIFCMStatus,
            xfRFOutlierAgc,
            xfRFOutlierSetTh,
            xfRFOutlierCeaseTh,
            xfRFRangeAgc,
            xfRFRangeSetTh,
            xfRFRangeCeaseTh,
            xfRFStddevAgc,
            xfRFStddevSetTh,
            xfRFStddevCeaseTh,
            xfRFDegradationAgc,
            xfRFDegradationSetTh,
            xfRFDegradationCeaseTh,
            xfRFMarginAgc,
            xfRFMarginSetTh,
            xfRFMarginCeaseTh,
            xfRFOutlierValue,
            xfRFRangeValue,
            xfRFStddevValue,
            xfRFDegradationValue,
            xfRFMarginValue,
            xfRFOutlierTrigger,
            xfRFRangeTrigger,
            xfRFStddevTrigger,
            xfRFDegradationTrigger,
            xfRFMarginTrigger,
            xfSdcCapability,
            xfSdcAdminStatus,
            xfSdcOperStatus,
            xfSdcDadeControl,
            xfSdcDadeStatus,
            xfSdcPath,
            xfSdcOduDateTimeCalibration,
            xfSdcOduSerialNumber,
            xfSdcGain,
            xfSdcActualPath,
            xfSdcDadeDelay,
            xfRfCurrentInputPowerSdcMain,
            xfRfCurrentInputPowerSdcDiv
        }
        STATUS current
        DESCRIPTION
            "A collection of all current objects in this MIB module."
        ::= { xfRadioLinkPtpRadioGroups 1 }

    END