path: root/MIBS/ericsson/XF-RADIOLINK-RLT-MIB

    XF-RADIOLINK-RLT-MIB DEFINITIONS ::= BEGIN

        IMPORTS
            entLogicalIndex, entPhysicalIndex
                FROM ENTITY-MIB
            ifIndex
                FROM IF-MIB
            MODULE-COMPLIANCE, OBJECT-GROUP
                FROM SNMPv2-CONF
            OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Integer32, IpAddress, Counter32, Counter64, Gauge32
                FROM SNMPv2-SMI
            PerfCurrentCount, PerfIntervalCount
                FROM PerfHist-TC-MIB
            HCPerfCurrentCount
                FROM HC-PerfHist-TC-MIB
            InetAddressIPv6
                FROM INET-ADDRESS-MIB
            TEXTUAL-CONVENTION, DisplayString, TruthValue
                FROM SNMPv2-TC
            xfRadioLink
                FROM XF-TOP-MIB;

        xfRadioLinkRltMIB MODULE-IDENTITY
            LAST-UPDATED "202011050000Z" -- 5 November 2020
            ORGANIZATION
                "Ericsson AB"
            CONTACT-INFO
                "
                Ericsson AB
                BURA DURA
                SE-417 56 Goteborg
                Sweden
                "
            DESCRIPTION
                "
                This MIB defines objects for Radio Link Terminal (RLT) and Carrier Termination (CT)
                for new Radio Link application in MINI-LINK TN supporting dual carrier capability.
                "

    REVISION "202011050000Z" -- 5 November 2020
        DESCRIPTION
            "
            Rev PC17
            xfFrameFormatType MO: added definition of FF type for:
            - 2-boards MIMO
            - SISO CA
            - XPIC CA
            "

    REVISION "202009170000Z" -- 17 September 2020
        DESCRIPTION
            "
            Rev PC16
            Added object xfRLTMeasuredHopLength in xfRLTTable:
            "

    REVISION "202006100000Z" -- 10 June 2020
        DESCRIPTION
            "
            Rev PC15
            TR#3054036: MIB Range validation failed:
            - xfRLTNumOfRLPSwitch
            "

    REVISION "202006030000Z" -- 03 June 2020
        DESCRIPTION
            "
            Rev PC14
            TR#3052599: extended range for following objects (adding 0 as valid value):
            - xfCarrierTermActualCapacity
            - xfActualTDMCapacity
            - xfCarrierTermActualLicensedCapacity
            "

    REVISION "202005280000Z" -- 28 May 2020
        DESCRIPTION
            "
            Rev PC13
            xfACMCapacity range extended to add 0 as valid value (TR#3045800)
            "

    REVISION "202004300000Z" -- 30 April 2020
        DESCRIPTION
            "
            Rev PC12
            xfRLTTDMIfTable: added 'xfTDMHopLength' object for TDM traffic delay compensation
            "

    REVISION "202003040000Z" -- 03 March 2020
        DESCRIPTION
            "
            Rev PC11
            xfRLTCapability: added 'capTXswoAndSSD' capability bit for TX switchover and SSD
            "

    REVISION "201910140000Z" -- 14 October 2019
        DESCRIPTION
            "
            Rev PC10
            In xfCarrierTerminationCapability table, xfACMprofile object is extended in order to
            support 8192QAM and 16384QAM modulations.
            For the same reason, following tables are updated:
            - xfRLPMACMCurrent24hTable
            - xfRLPMACMInterval24hTable
            - xfRLPMACMCurrent15mTable
            - xfRLPMACMInterval15mTable
            "

    REVISION "201910090000Z" -- 09 October 2019
        DESCRIPTION
            "
            Rev PC9
            new MIb added:
            xfRLPMMimoCurrentTable
            xfRLPMMimoCurrent24hTable
            xfRLPMMimoInterval24hTable
            xfRLPMMimoCurrent15mTable
            xfRLPMMimoInterval15mTable
            "

    REVISION "201907180000Z" -- 18 July 2019
        DESCRIPTION
            "
            Rev PC8
            xfRLTTxSwitchOverConfiguration: removed value 'remote'
            "
    REVISION "201906070000Z" -- 07 June 2019
        DESCRIPTION
            "
            Rev PC7
            Added Selective Space Diversity support
            xfRLTProtectionSwitchMode: added value 'txSwitchDisabled'
            xfRLTTxSwitchOverConfiguration: added values 'local' and 'remote'
            "

    REVISION "201903260000Z" -- 26 March 2019
        DESCRIPTION
            "
            Rev PC6
            xfRLTCapability: added description for 'capMIMO' capability bit
            "

    REVISION "201903250000Z" -- 25 March 2019
        DESCRIPTION
            "
            Rev PC5
            xfRLTCapability: added 'capMIMO' capability bit for MIMO
            "

    REVISION "201902280000Z" -- 28 February 2019
        DESCRIPTION
            "
            Rev PC4
            xfMIMOCTmember1-4 in xfMIMOGroupTable changed access to read-only.
            xfRLTEncryptionOperStatus: changed values to UP and DOWN.
            "

    REVISION "201902200000Z" -- 20 February 2019
        DESCRIPTION
            "
            Rev PC3
            xfFrameFormatType MO: added definition of FF type for Long Haul 2-boards XPIC.
            "

    REVISION "201901300000Z" -- 30 January 2019
        DESCRIPTION
            "
            Rev PC2
            xfRLTCapability: added capRLEncryption capability bit for Radio Link Encryption.
            "

    REVISION "201901110000Z" -- 11 January 2019
        DESCRIPTION
            "
            Rev PC1
            Added xfRLTEncryptionTable for Radio Link Encryption.
            "

    REVISION "201811240000Z" -- 24 November 2018
        DESCRIPTION
            "
            Rev PB32
            xfRLTFeRltSeverity renamed to xfRLTRltSeverity.
            "

    REVISION "201810240000Z" -- 24 October 2018
        DESCRIPTION
            "
            Rev PB31
            Changed naming of xfRLTEnhancedACMProtectionMode values in xfRLTProtectionTable:
             - basic -> activeTransmitter
             - maximumThroughput -> maximumCapacity

            Changed name of capEnhAcmMaxThroughput into capEnhAcmMaxCapacity.
            "

    REVISION "201810030000Z" -- 03 October 2018
        DESCRIPTION
            "
            Rev PB30
            Added xfRLTEnhancedACMProtectionOperStatus in xfRLTProtectionTable.
            "

    REVISION "201809170000Z" -- 17 September 2018
        DESCRIPTION
            "
            Rev PB29
            - Added xfRLTEnhancedACMProtectionMode in xfRLTProtectionTable.
            - Added cap bit in xfRLTCapability for Enhanced ACM Protection: Maximum Throughput.
            - Added cap bit in xfRLTCapability for Enhanced ACM Protection: Maximum Protection.
            "

    REVISION "201808270000Z" -- 27 August 2018
        DESCRIPTION
            "
            Rev PB28
            xfCarrierTermXPI: modified description.
            "

    REVISION "201808160000Z" -- 16 August 2018
        DESCRIPTION
            "
            Rev PB27
            xfCarrierTermXPICOperStatus: Removed reference to SNIR in MO description.
            "

    REVISION "201807090000Z" -- 09 July 2018
        DESCRIPTION
            "
            Rev PB26
            xfFrameFormatType MO: added definition of FF type for 2-boards XPIC.
            "

    REVISION "201804130000Z" -- 13 April 2018
        DESCRIPTION
            "
            Rev PB25
            Type of MOs:
               - xfRLTActualTxTotalCapacity
               - xfRLTActualTxPacketCapacity
               - xfRLTLimitedTotalCapacity
               - xfCGIfMaxSpeed
               - xfRLWANActualCapacity
               - xfRLWANLimitedCapacity
            changed to Gauge32.
            "

    REVISION "201804090000Z" -- 09 April 2018
        DESCRIPTION
            "
            Rev PB24
            In table xfRLTTable:
               - Added bit(12) capXpicMembersAutoSelection(12)
               - Added bit(13) capManualEqpSwitch(13)
            "

    REVISION "201803230000Z" -- 23 March 2018
        DESCRIPTION
            "
            Rev PB23
            Added to xfXPICPairTable second index:
                * xfXpicPairIndex
            "

    REVISION "201803130000Z" -- 13 March 2018
        DESCRIPTION
            "
            Rev PB22
            Added to xfCGIfAlarms the alarm:
                * unableToProtectEqp
            "

    REVISION "201801300000Z" -- 30 January 2018
        DESCRIPTION
            "
            Rev PB21
            In table xfRLTTable:
               - xfRLTCapability bit(1) changed to capTDMWithEQP(1)
               - Added bit(11) capXpicBetweenBoards(11)
            "

    REVISION "201712270000Z"  -- 27 December 2017
        DESCRIPTION
            "
            Rev PB20
            Added values to MO xfRLTMode in xfRLTTable:
              - onePlusOneRadioLinkProtectionAndEquipmentProtection
              - twoPlusZeroRadioLinkBondingAndEquipmentProtection
              - twoPlusTwoRadioLinkProtectionAndEquipmentProtection
              - fourPlusZeroRadioLinkBondingAndEquipmentProtection

            Added capability bits to xfRLTCapability in xfRLTTable:
              - capTDM
              - capCsPlurality
              - capCtAutoSelection
              - capOnePlusZero
              - capOnePlusOneRadioLinkProtection
              - capTwoPlusZeroAdvancedRadioLinkBonding
              - capOnePlusOneRadioLinkProtectionWithEQP
              - capTwoPlusZeroRadioLinkBondingWithEQP
              - capTwoPlusTwoRadioLinkProtectionWithEQP
              - capFourPlusZeroRadioLinkBondingWithEQP
            "

    REVISION "201709190000Z"  -- 19 September 2017
        DESCRIPTION
            "
            Rev PB19
            - Type of MOs in table xfRLPMContinuousCounterTable changed to PerfCurrentCount/HCPerfCurrentCount.
            - Removed MO xfRLTProtectionPMReset in table xfRLTProtectionTable.
            "

    REVISION "201708030000Z"  -- 03 August 2017
        DESCRIPTION
            "
            Rev PB18
            Introduction in xfRLPMContinuousCounterTable of MOs:
              - xfPMCurrentESR
              - xfPMCurrentSESR
              - xfPMCurrentBBER
            "

    REVISION "201705030000Z" -- 03 May 2017
        DESCRIPTION
            "
            Rev. PB17
            - Updated description for xfCarrierTermActualLicensedCapacity MO.
            "

    REVISION "201702010000Z" -- 01 February 2017
        DESCRIPTION
            "
            Rev. PB16
            - Added to xfCGIfAlarms the alarms:
                * txSwitchover
                * remoteTxSwitchOver
                * unableToProtect
                * rfInputThresholdProtection
            "

    REVISION "201701300000Z" -- 30 January 2017
        DESCRIPTION
            "
            Rev. PB15
            - Added the MOs xfRLTNumOfRLPSwitch and xfRLTProtectionPMReset in table xfRLTProtectionTable.
            "


    REVISION "201611040000Z" -- 04 November 2016
        DESCRIPTION
            "
            Rev. PB14
            - Added the MO xfRLTHighestSeverityAlarm in table xfRLTHierarchyModuleTable.
            "

    REVISION "201609290000Z" -- 29 September 2016
        DESCRIPTION
            "
            Rev. PB13
            - Added xfRLTProtectionTable.
            - Move unused Protection MOs from xfRLTTable to xfRLTProtectionTable
            "

    REVISION "201609080000Z" -- 08 September 2016
        DESCRIPTION
            "
            Rev. PB12
            - Updated description for xfTDMMaxTributaries MO.
            "

    REVISION "201607180000Z" -- 18 July 2016
        DESCRIPTION
            "
            Rev. PB11
            - Updated description for xfPMPerfReset MO.
            "

    REVISION "201606100000Z" -- 10 June 2016
        DESCRIPTION
            "
            Rev. PB10
            - Added new table 'xfRLTHierarchyModuleTable'.
            "

    REVISION "201606060000Z" -- 06 June 2016
        DESCRIPTION
            "
            Rev. PB9
            - 'xfRLTCapability' and 'xfRLTInventoryLastChange' MOs added to 'xfRLTTable'.
            "

    REVISION "201606010000Z" -- 01 June 2016
        DESCRIPTION
            "
            Rev. PB8
            - Modified syntax for 'xfXPICCTmember1' and 'xfXPICCTmember2' MOs.
            "

    REVISION "201605020000Z" -- 02 May 2016
        DESCRIPTION
            "
            Rev. PB7
            - Added xfRLWANIfTable.
            "

    REVISION "201604290000Z" -- 29 April 2016
        DESCRIPTION
            "
            Rev. PB6
            - Changed enum for xfCGIfHopViewStatus MO.
            "

    REVISION "201604120000Z" -- 12 April 2016
        DESCRIPTION
            "
            Rev. PB5
            - Updated description for xfPMPerfReset MO.
            - Updated description for xfCarrierTermActualCapacity MO.
            - Updated description for xfRLTActualTXPacketCapacity MO.
            - Extended list of possible values for xfRLTStatus MO.
            "

    REVISION "201603010000Z" -- 1 March 2016
        DESCRIPTION
            "
            Rev. PB4
            - Changed syntax for xfRLTManualSwitchCommand MO.
            - NotApplicable value added to xfCarrierTermXPICOperStatus and xfCarrierTermMIMOOperStatus.
            "

    REVISION "201602220000Z" -- 22 February 2016
        DESCRIPTION
            "
            Rev. PB2
            - xfCarrierTermXPICOperStatus: added value 'testing'.
            - xfRLTTxSwitchFarEnd MO renamed into xfRLTTxSwitchOverConfiguration
            - xfRLTResetTxSwitchAlarm MO renamed into xfRLTTxSwitchOverAlarmReset, syntax changed.
            - Description updated for some MOs.
            "

    REVISION "201602050000Z" -- 05 February 2016
        DESCRIPTION
            "
            Rev. PB1
            - Modified in xfCarrierTerminationCapabilityTable:
              * xfACMProfile: removed non-XPIC / XPIC definition
              * xfFrameFormatType: Standard definition added, other values updated
              * xfChannelSpacing: added 60 MHz and 80 MHz for ANSI,
                changed vaue for 112 MHz
            - Modified in xfCarrierTerminationTable:
              * xfCarrierTermXPICOperStatus: updated list of possible values
              * xfCarrierTermMIMOOperStatus: updated list of possible values
              * xfCarrierTermOperStatus: updated list of possible values
            - Added in xfRLTTable:
              * xfRLTManualSwitchCommand
              * xfRLTTxSwitchFarEnd
              * xfRLTResetTxSwitchAlarm
              * xfRLTfeRltSeverity
            - Added in xfRLTDMIfTable:
              * xfTDMMaxTributaries
            - Added in xfCGIfTable:
              * xfCGIfHopViewStatus
            - Added in xfCarrierTerminationTable:
              * xfCarrierTermActualRxACM
              * xfCarrierTermFeCTSeverity
            - Added in xfXPICPairTable:
              * xfXPICAutoRestore
            "

    REVISION "201511250000Z" -- 25 November 2015
        DESCRIPTION
            "
            Rev. PA31
            - Added RLT ID alarm in MO xfCGIfAlarms of xfCGIfTable.
            - Range of xfCarrierTermWantedLicensedCapacity extended, it starts from 0 now (instead of 1).
            - Value 'other' for xfCarrierTermPreamble renamed with 'notSpecified'.
            - Value 'other' for xfCarrierTermReferenceSEC renamed with 'notSpecified'.
            - Updated description for following objects:
              * xfCarrierTermPreamble
              * xfCarrierTermReferenceSEC
              * xfCarrierTermBerAlarmThreshold
            - Updated names and/or values list for following objects:
              * xfRLTFarEndIdCheck
              * xfTDMRxLoop
              * xfTDMEnable
              * xfXPICPairAdminStatus
              * xfXPICPairRecovery
              * xfMIMOGroupAdminStatus
              * xfMIMOGroupRecovery
            "

    REVISION "201511160000Z" -- 16 November 2015
        DESCRIPTION
            "
            Rev. PA30
            Value 'other' for xfCarrierTermPolarization renamed with 'notSpecified'.
            "

    REVISION "201511100000Z" -- 10 November 2015
        DESCRIPTION
            "
            Rev. PA29
            Added status 'testing' to xfCarrierTermOperStatus object.
            Size of xfTDMDistinguishedName object limited to 32 characters.
            "

    REVISION "201511050000Z" -- 05 November 2015
        DESCRIPTION
            "
            Rev. PA28
            Updated definition of xfPMACMStatus object in xfRLPMACMConfigTable.
            "

    REVISION "201509160000Z" -- 16 September 2015
        DESCRIPTION
            "
            Rev. PA27
            * Updated list of possible values for xfCarrierTermReferenceSEC object.
            * Added RLT PM tables:
              - xfRLPMContinuousCounterTable
              - xfRLPMACMConfigTable
              - xfRLPMACMCurrent24hTable
              - xfRLPMACMInterval24hTable
              - xfRLPMACMCurrent15mTable
              - xfRLPMACMInterval15mTable
            "

    REVISION "201508270000Z" -- 27 August 2015
        DESCRIPTION
            "
            Rev. PA26
            * xfIfStatus object is read-only now.
            * Changed names of possible values for xfTDMRxLoop object.
            "

    REVISION "201508200000Z" -- 20 August 2015
        DESCRIPTION
            "
            Rev. PA25
            * xfRadioChannelTable renamed into xfCarrierTerminationTable.
              Overall review of table's objects, including renaming of *RadioChannel* into *CarrierTerm*.
              Removed XPIC and MIMO related objects (but Oper Status).
            * xfRadioChannelCapabilityTable renamed into xfCarrierTerminationCapabilityTable.
            * xfRLTTable added:
              - xfRLTReset
              - xfRLTFadeNotificationTimer
            * xfXPICPairTable added:
              - xfXPICPairRecovery
              - xfXPICPairRestore
            * xfMIMOGroupTable added:
              - xfMIMOGroupRecovery
              - xfMIMOGroupRestore
            * xfRLTDMIfTable added:
              - xfTDMDistinguishedName
              - xfTDMRxLoop
            "

    REVISION "201507070000Z" -- 7 July 2015
        DESCRIPTION
            "
            Rev. PA24
            * Modified RLT table.
            * Added xfXPICPairTable.
            * Added xfMIMOGroupTable.
            "

    REVISION "201506300000Z" -- 30 June 2015
        DESCRIPTION
            "
            Rev. PA23
            Added chsp112MHz value to xfChannelSpacing object.
            "

    REVISION "201506040000Z" -- 04 June 2015
        DESCRIPTION
            "
            Rev. PA22
            Added second index, liIfIndex, in xfLIMappingtable.
            "

    REVISION "201506030000Z" -- 03 June 2015
        DESCRIPTION
            "
            Rev. PA21
            Removed xfWantedTDMCapacity in xfRLTDMIfTable.
            "

    REVISION "201505110000Z" -- 11 May 2015
        DESCRIPTION
            "
            Rev. PA20
            Added xfCGIfIndex to xfCGIfTable.
            "

    REVISION "201505080000Z" -- 8 May 2015
        DESCRIPTION
            "
            Rev. PA19
            Added xfCGIfTable.
            "

    REVISION "201505060000Z" -- 6 May 2015
        DESCRIPTION
            "
            Rev. PA18
            Removed:
                xfRLTDMIfTable    xfTDMAllocation
            Added:
                xfRLTDMIfTable    xfWantedTDMAllocation
                                  xfActualTDMAllocation
            "
    REVISION "201504200000Z" -- 20 April 2015
        DESCRIPTION
            "
            Rev. PA17
            Removed rcEntLogicalIndex in xfRadioChannelTable.
            "

    REVISION "201504130000Z" -- 13 April 2015
        DESCRIPTION
            "
            Rev. PA16
            Removed xfRLWANIfTable.
            "

    REVISION "201503300000Z" -- 30 March 2015
        DESCRIPTION
            "
            Rev. PA15
            Changed type for xfACMIndex object in xfACMProfileCapacityTable.
            "

    REVISION "201503190000Z" -- 19 March 2015
        DESCRIPTION
            "
            Rev. PA14
            * xfRLTDMIfIndex object added in xfRLTDMIfTable.
            * xfRLWANIfIndex object added in xfRLWANIfTable.
            * Changed names of values for xfACMProfile object.
            * Changed type from Integer32 to RadioChannelACMIndex for objects
              - xfRadioChannelMinACMIndex
              - xfRadioChannelActualACMIndex
              - xfRadioChannelMaxACMIndex
            "

    REVISION "201503110000Z" -- 11 March 2015
        DESCRIPTION
            "
            Rev. PA13
            xfRadioChannelBerAlarmThresholdCapability object removed.
            "

    REVISION "201503090000Z" -- 09 March 2015
        DESCRIPTION
            "
            Rev. PA12
            * xfRadioFrameType changed to xfFrameFormatType.
            * xfACMMinCapacity changed to xfMinACMCapacity.
            * xfACMMaxCapacity changed to xfMaxACMCapacity.
            "

    REVISION "201503060000Z" -- 06 March 2015
        DESCRIPTION
            "
            Rev. PA11
            * cgIfDescr changed to cgTypeIndex.
            * Minor adjustments to avoid sintax check warning.
            "

    REVISION "201503050000Z" -- 05 March 2015
        DESCRIPTION
            "
            Rev. PA10
            * Adjustements to objects in xfRadioChannelTable.
              - Descriptions updated.
              - For enumerative objects, value (1) is always used for 'other'.
            * xfRadioLinkRltConformance added.
            "

    REVISION "201502250000Z" -- 25 February 2015
        DESCRIPTION
            "
            Rev. PA9
            * <xfChannel> changed to <xfRadioChannel> for all applicable objects and tables.
            * Removed object <xfRadioChannelSpectrumEfficiencyClassCapability>.
            * Wrong spelling corrected: xfChanneMinACMIndex --> xfRadioChannelMinACMIndex.
            * Changed objects names:
              xfRadioChannelStatus -> xfRadioChannelOperStatus
              xfXPICOper --> xfXPICAdminStatus
              xfXPICStatus --> xfXPICOperStatus
              xfMIMOOper --> xfMIMOAdminStatus
              xfMIMOStatus --> xfIMIMOOperStatus
              xfXPICPaired --> xfXPICRadioChannelPaired
              xfMIMOPaired --> xfMIMORadioChannelPaired
              xfRCPreamble --> xfRadioChannelPreamble
              xfChannelMSELevel --> xfMSELevel
            * Added new objects:
              xfXPICRestore
              xfMIMORestore
              xfRadioChannelRestore
              xfRadioChannelAutoRemoveLoopEnable
              xfRadioChannelBerAlarmThreshold
            "

    REVISION "201502180000Z" -- 18 February 2015
        DESCRIPTION
            "
            Rev. PA8
            XfRadioChannelTable:
                Changed:
                    xfXPICMIMORecovery --> xfXPICRecovery
                    xfXPICMIMOPaired --> xfXPICPaired
                Added:
                   xfMIMORecovery
                   xfMIMOPaired
            xfRLTTable
                Changed:
                    xfActualCapacity --> xfRLTActualCapacity
            "

    REVISION "201502100000Z" -- 10 February 2015
        DESCRIPTION
            "
            Rev. PA7
            Added:
                xfSelectedFrameID MO in xfRadioChannelTable
            Changed:
                xfXPICMIMOPaired to R-W
            "

    REVISION "201501290000Z" -- 29 January 2015
        DESCRIPTION
            "
            Rev. PA6
            Added:
                xfACMProfileCapacityTable
            Modified:
                xfChannelCapabilityTable - added the following MOs:
                    xfRadioFrameType
                    xfACMMinCapacity
                    xfACMMaxCapacity
                    xfACMProfile
            "

    REVISION "201412120000Z" -- 12 December 2014
        DESCRIPTION
            "
            Rev. PA5
            Removed:
                xfRadioChannelTable: xfRadioChannelName
            Added:
                xfRadioChannelTable: xfRadioChannelStatus
                                     xfXPICOper
                                     xfMIMOOper
                                     xfXPICMIMORecovery
                                     xfXPICMIMOPaired
                                     xfRCPreamble
                xfRLTDMIfTable       xfTDMAllocation
                xfRLWANIfTable       xfWANMinSpeed
                                     xfMaxMaxSpeed
            "

    REVISION "201412100000Z" -- 10 December 2014
        DESCRIPTION
            "
            Rev. PA4
            Minor change to compile with Wind River compiler.
            "

    REVISION "201412020000Z" -- 02 December 2014
        DESCRIPTION
            "
            Rev. PA3
            Table removed: xfRadioLinkRltTable
            Table renamed: xfRadioChannelMappingTable --> xfRadioChannelTable
                           xfRLTTerminalTable --> xfRLTTable,
                           xfRLLogicalToIfTable --> xfLIMappingTable
            Table added:   xfChannelGroupTable, xfTrafficTable,
                           xfRLTDMIfTable, xfRLWANIfTable.
            Object value removed: equipmentProtection in ChannelGroupType
            Changed ifName to ifIndex in xfChannelGroupTable index
            Changed ifName to ifIndex in xfLIMappingTable and removed ifIndex as table index
            Added in:
                xfLIMappingTable the MOs:    xfLIName
                                             xfLIIfDescr
                xfRadioChannelTable the MOs: xfRadioChannelID
                                             xfChanneMinRowIndex
                                             xfChannelActualRowIndex
                                             xfChannelMaxRowIndex
                                             xfChannelCapabilitiesLastChange
                                             xfChannelSpectrumEfficiencyClass
                                             xfChannelSpectrumEfficiencyClassCapability
                                             xfChannelActualCapacity
                                             xfChannelCapacityLicense
                                             xfXPICStatus
                                             xfMIMOStatus
                                             xfXPILevel
                                             xfChannelMSELevel
            "

    REVISION "201412010000Z" -- 01 December 2014
        DESCRIPTION
            "
            Rev. PA2
            Table added: xfRadioLinkRltTable, xfRLLogicalToIfTable
                         xfRadioChannelMappingTable, xfRLTTerminalTable.
            "

    REVISION "201411110000Z" -- 11 November 2014
        DESCRIPTION
            "
            Rev. PA1
            Initial revision.
            "
        ::= { xfRadioLink 5 }

--
-- Textual conventions
--

    CarrierTermACMIndex ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "This TC enumerates all possible ACM index values."
        SYNTAX INTEGER
        {
            acm4QAMStrong(1),
            acm4QAMStd(2),
            acm4QAMLight(3),
            acm16QAMStrong(4),
            acm16QAMStd(5),
            acm16QAMLight(6),
            acm32QAMStrong(7),
            acm32QAMStd(8),
            acm32QAMLight(9),
            acm64QAMStrong(10),
            acm64QAMStd(11),
            acm64QAMLight(12),
            acm128QAMStrong(13),
            acm128QAMStd(14),
            acm128QAMLight(15),
            acm256QAMStrong(16),
            acm256QAMStd(17),
            acm256QAMLight(18),
            acm512QAMStrong(19),
            acm512QAMStd(20),
            acm512QAMLight(21),
            acm1024QAMStrong(22),
            acm1024QAMStd(23),
            acm1024QAMLight(24),
            acm2048QAMStrong(25),
            acm2048QAMStd(26),
            acm2048QAMLight(27),
            acm4096QAMStrong(28),
            acm4096QAMStd(29),
            acm4096QAMLight(30),
            acm8192QAMStrong(31),
            acm8192QAMStd(32),
            acm8192QAMLight(33),
            acm16384QAMStrong(34),
            acm16384QAMStd(35),
            acm16384QAMLight(36)
        }

--
-- Node definitions
--
    xfRadioLinkRltObjects OBJECT IDENTIFIER
            ::= { xfRadioLinkRltMIB 1 }
    xfRadioLinkRltPmObjects OBJECT IDENTIFIER
            ::= { xfRadioLinkRltMIB 2 }
    xfRadioLinkRltConformance OBJECT IDENTIFIER
            ::= { xfRadioLinkRltMIB 3 }

--
------------------------------------------------------------------------------
-- xfRadioLinkRltObjects
------------------------------------------------------------------------------
-- The xfRadioLinkRltObjects MOs

------------------------------------------------------------------------------
-- xfChannelGroupTable
------------------------------------------------------------------------------
    xfChannelGroupTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfChannelGroupEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table lists all relationships, for ech Channel Group (CG), between the Bonding/RLP interface
            and the RL WAN interface and allows to configure CG as either Bonding or Radio Link protection (RLP)."
        ::= { xfRadioLinkRltObjects 1 }

    xfChannelGroupEntry OBJECT-TYPE
        SYNTAX XfChannelGroupEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfChannelGroupTable."
        INDEX { cgIfIndex, cgTypeIndex }
        ::= { xfChannelGroupTable 1 }

    XfChannelGroupEntry ::=
        SEQUENCE
        {
            cgIfIndex       Integer32,
            cgTypeIndex     INTEGER,
            xfIfStatus      INTEGER
        }

    cgIfIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It is the ifIndex of WAN interface.
            The interface identified by atIfIndex is the same
            interface as identified by the same value of ifIndex."
        ::= { xfChannelGroupEntry 1 }

    cgTypeIndex OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            bonding(2),
            rlp(3)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Index representing the Channel Group interface type:
            - Bonding (2)
            - RLP: Radio Link Protection (3)"
        ::= { xfChannelGroupEntry 2 }

    xfIfStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            ready(2),
            notReady(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object defines the Channel Group interface type:
            either Bonding or RLP (Radio Link Protection).
            Default: notReady"
        ::= { xfChannelGroupEntry 3 }

------------------------------------------------------------------------------
-- xfLIMappingTable
------------------------------------------------------------------------------
    xfLIMappingTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfLIMappingEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used when navigating from a logical entity to interface,
            representing the relationship between:
            - RLT logical entity and either Bonding/RLP interface;
            - Carrier Termination (CT) logical entity and RAU IF interface."
        ::= { xfRadioLinkRltObjects 2 }

    xfLIMappingEntry OBJECT-TYPE
        SYNTAX XfLIMappingEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfLIMappingTable."
        INDEX { liEntLogicalIndex, liIfIndex }
        ::= { xfLIMappingTable 1 }

    XfLIMappingEntry ::=
        SEQUENCE
        {
            liEntLogicalIndex   Integer32,
            liIfIndex           Integer32,
            xfLIName            DisplayString,
            xfLIIfDescr         DisplayString
        }

    liEntLogicalIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The value of this object uniquely identifies the logical
            entity: RLT (Radio Link Terminal) and CT (Carrier Termination).
            The logical entity identified by liEntLogicalIndex is the same
            interface as identified by the same value of entLogicalIndex."
        ::= { xfLIMappingEntry 1 }

    liIfIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the ifIndex of Bonding/RLP interface and RAU IF.
            The interface identified by liIfIndex is the same
            interface as identified by the same value of ifIndex."
        ::= { xfLIMappingEntry 2 }

    xfLIName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the Name of the Radio Link Terminal (RLT) or Carrier Termination (CT)."
        ::= { xfLIMappingEntry 3 }

    xfLIIfDescr OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A textual string containing information about the ifDescr of both
            Channel Group interface (either Bonding or RLP (Radio Link Protection))
            and RAU IF interface."
        ::= { xfLIMappingEntry 4 }

------------------------------------------------------------------------------
-- xfCarrierTerminationTable
------------------------------------------------------------------------------
    xfCarrierTerminationTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfCarrierTerminationEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to configure the Carrier Termination (CT)."
        ::= { xfRadioLinkRltObjects 3 }

    xfCarrierTerminationEntry OBJECT-TYPE
        SYNTAX XfCarrierTerminationEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfCarrierTerminationTable."
        INDEX { entLogicalIndex }
        ::= { xfCarrierTerminationTable 1 }

    XfCarrierTerminationEntry ::=
        SEQUENCE
        {
            xfCarrierTermDistinguishedName              DisplayString,
            xfCarrierTermLabel                          DisplayString,
            xfCarrierTermOperStatus                     INTEGER,
            xfCarrierTermRadioFrameId                   Integer32,
            xfCarrierTermPreamble                       INTEGER,
            xfCarrierTermSelectedMinACM                 CarrierTermACMIndex,
            xfCarrierTermActualACM                      CarrierTermACMIndex,
            xfCarrierTermSelectedMaxACM                 CarrierTermACMIndex,
            xfCarrierTermCapabilitiesLastChange         TimeTicks,
            xfCarrierTermReferenceSEC                   INTEGER,
            xfCarrierTermWantedLicensedCapacity         Integer32,
            xfCarrierTermActualLicensedCapacity         Integer32,
            xfCarrierTermActualCapacity                 Integer32,
            xfCarrierTermPolarization                   INTEGER,
            xfCarrierTermXPICOperStatus                 INTEGER,
            xfCarrierTermMIMOOperStatus                 INTEGER,
            xfCarrierTermSNIR                           Integer32,
            xfCarrierTermXPI                            Integer32,
            xfCarrierTermReset                          INTEGER,
            xfCarrierTermRestore                        INTEGER,
            xfCarrierTermAutoRemoveLoopEnable           INTEGER,
            xfCarrierTermBerAlarmThreshold              INTEGER,
            xfCarrierTermActualRxACM                    CarrierTermACMIndex,
            xfCarrierTermFeCTSeverity                   BITS
        }

    xfCarrierTermDistinguishedName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the distinguished name of the Carrier Termination in the format Rack/Slot/CT."
        ::= { xfCarrierTerminationEntry 1 }

    xfCarrierTermLabel OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Label identifying the Carrier Termination.
            It can be freely set by operator to label the Carrier Termination."
        ::= { xfCarrierTerminationEntry 2 }

    xfCarrierTermOperStatus OBJECT-TYPE
        SYNTAX      INTEGER
        {
            other(1),
            down(2),
            up(3),
            degraded(4),
            testing(5)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the operative status of the Carrier Termination:
            - down(2)
            - up(3)
            - degraded(4)
            - testing(5)"
        ::= { xfCarrierTerminationEntry 3 }

    xfCarrierTermRadioFrameId OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It represents the selected Radio Frame ID."
        ::= { xfCarrierTerminationEntry 4 }

    xfCarrierTermPreamble OBJECT-TYPE
        SYNTAX INTEGER
        {
            notSpecified(1),
            preambleA(2),
            preambleB(3),
            preambleC(4),
            preambleD(5)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It allows to set different preambles in the radio frame
            of each Carrier Termination in a XPIC or MIMO configuration:
            - preambleA(2)
            - preambleB(3)
            - preambleC(4)
            - preambleD(5)
            For non XPIC nor MIMO configurations, it can be left to notSpecified(1)."
        ::= { xfCarrierTerminationEntry 5 }

    xfCarrierTermSelectedMinACM OBJECT-TYPE
        SYNTAX      CarrierTermACMIndex
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It represents the selected minimum Tx ACM (Adaptive Code Modulation)."
        ::= { xfCarrierTerminationEntry 6 }

    xfCarrierTermActualACM OBJECT-TYPE
        SYNTAX      CarrierTermACMIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the actual (current) Tx ACM (Adaptive Code Modulation)."
        ::= { xfCarrierTerminationEntry 7 }

    xfCarrierTermSelectedMaxACM OBJECT-TYPE
        SYNTAX      CarrierTermACMIndex
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It represents the selected maximum Tx ACM (Adaptive Code Modulation)."
        ::= { xfCarrierTerminationEntry 8 }

    xfCarrierTermCapabilitiesLastChange OBJECT-TYPE
        SYNTAX      TimeTicks
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The value of sysUpTime at the time of the last creation or
             deletion of an entry in the xfCarrierTerminationCapabilityTable.
             If the number of entries has been unchanged since the last
             re-initialization of the local network management subsystem,
             then this object contains a zero value."
        ::= { xfCarrierTerminationEntry 9 }

    xfCarrierTermReferenceSEC OBJECT-TYPE
        SYNTAX INTEGER
        {
            notSpecified(1),
            sec2(2),
            sec4L(3),
            sec4H(4),
            sec5LB(5),
            sec5HB(6),
            sec6LB(7),
            sec6HB(8),
            sec7B(9)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Reference Spectrum Efficiency Class (SEC):
            - notSpecified(1): not configured, not possible to set
            - sec2(2): spectrum eff. Class 2
            - sec4L(3): spectrum eff. Class 4L
            - sec4H(4): specturm eff. Class 4H
            - sec5LB(5): spectrum eff. Class 5LB
            - sec5HB(6): spectrum eff. Class 5HB
            - sec6LB(7): spectrum eff. Class 6LB
            - sec6HB(8): spectrum eff. Class 6HB
            - sec7B(9): spectrum eff. Class 7B

            In ETSI, a value different from notSpecified(1) must be configured.
            In ANSI, no value can be set and notSpecified(1) is always returned.

            Near end access: read-write.
            Far end access: read-write."
        ::= { xfCarrierTerminationEntry 10 }

    xfCarrierTermWantedLicensedCapacity OBJECT-TYPE
        SYNTAX      Integer32 (0..2147483647)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It represents the wanted traffic licensed capacity on the Carrier Termination, expressed in Kbps.
            The default value 0 (i.e. disabled) means that no wanted licensed capacity has been selected by the user.
            The value used by RL license logic to request capacity licenses for the Carrier Termination is:
            - the capacity of selected max profile, if xfCarrierTermWantedLicensedCapacity = 0
            - the value of xfCarrierTermWantedLicensedCapacity itself, if it is different from 0
            "
        ::= { xfCarrierTerminationEntry 11 }

    xfCarrierTermActualLicensedCapacity OBJECT-TYPE
        SYNTAX      Integer32 (0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This MO represents the Actual Licensed Capacity used on the Carrier Termination:
            - if Wanted Licensed Capacity is disabled (i.e. xfCarrierTermWantedLicensedCapacity = 0),
              the Selected Max ACM (xfCarrierTermSelectedMaxACM MO) is used for requesting the license capacity on the carrier;
            - if Wanted Licensed Capacity is enabled (i.e. xfCarrierTermWantedLicensedCapacity > 0),
              the value of Wanted Licensed Capacity itself is used for requesting the license capacity on the carrier.
            "
        ::= { xfCarrierTerminationEntry 12 }

    xfCarrierTermActualCapacity OBJECT-TYPE
        SYNTAX      Integer32 (0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the actual transmitted capacity supported by Carrier Termination in Kbps."
        ::= { xfCarrierTerminationEntry 13 }

    xfCarrierTermPolarization OBJECT-TYPE
        SYNTAX INTEGER
        {
            notSpecified(1),
            horizontal(2),
            vertical(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "XPIC polarization, either horizontal or vertical."
        ::= { xfCarrierTerminationEntry 14 }

    xfCarrierTermXPICOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            locked(2),
            unlocked(3),
            mute(4),
            notApplicable(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "XPIC locking status:
            - Other(1): don't use
            - Locked(2): XPIC is locked: XPI valid
            - Unlocked(3): XPIC is not locked: XPI not valid
            - Mute(4): XPIC is muted (XPIC recovery started)
            - NotApplicable(5): XPIC is disabled"
        ::= { xfCarrierTerminationEntry 15 }

    xfCarrierTermMIMOOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            locked(2),
            unlocked(3),
            mute(4),
            notApplicable(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "MIMO locking status:
            - Other(1): don't use
            - Locked(2): MIMO is locked: XPI and SNIR valid
            - Unlocked(3): MIMO is not locked: XPI and SNIR not valid
            - Mute(4): MIMO is muted
            - NotApplicable(5): MIMO is disabled"
        ::= { xfCarrierTerminationEntry 16 }

    xfCarrierTermSNIR OBJECT-TYPE
        SYNTAX Integer32 --(-1000..1000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Signal to Noise Interference Ratio (SNIR) in dB."
        ::= { xfCarrierTerminationEntry 17 }

    xfCarrierTermXPI OBJECT-TYPE
        SYNTAX Integer32 --(-1000..1000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Cross-Polar Interference (XPI) level of the receiver in tenth of dB."
        ::= { xfCarrierTerminationEntry 18 }

     xfCarrierTermReset OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noReset(2),
            reset(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Reset command forces all the Carrier Termination settings
            to their own default."
        ::= { xfCarrierTerminationEntry 19 }

     xfCarrierTermRestore OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noRestore(2),
            restore(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Restore command clears RFloop, IFloop and turns RAU transmitter on."
        ::= { xfCarrierTerminationEntry 20 }

    xfCarrierTermAutoRemoveLoopEnable OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disabled(2),
            enabled(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Auto remove all RL loops after 15 minutes."
        ::= { xfCarrierTerminationEntry 21 }

    xfCarrierTermBerAlarmThreshold OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            ber1e3(2),
            ber1e4(3),
            ber1e5(4),
            ber1e6(5)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Threshold for BER alarm.
            Default: ber1e3(2)."
        ::= { xfCarrierTerminationEntry 22 }

    xfCarrierTermActualRxACM OBJECT-TYPE
        SYNTAX      CarrierTermACMIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the actual (current) Rx ACM (Adaptive Code Modulation)."
        ::= { xfCarrierTerminationEntry 23 }

      xfCarrierTermFeCTSeverity OBJECT-TYPE
        SYNTAX BITS
        {
            feCtSeverity0(0),
            feCtSeverity1(1),
            feCtSeverity2(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object represents the highest severity of Far-End CT alarms and is populated only if Far-End terminal is
            represented by a Packet terminal (PT). Craft uses this MO to colour the box representing the Far-End CT
            in the hop view.
            In case of the Far-End is a TN, the remote highest alarm severity of CT is referred to the interfaces:
            RAU IF and RF IF.
            "
        ::= { xfCarrierTerminationEntry 24 }

------------------------------------------------------------------------------
-- xfCarrierTerminationCapabilityTable
------------------------------------------------------------------------------
    xfCarrierTerminationCapabilityTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfCarrierTerminationCapabilityEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to configure the Carrier Termination (CT)."
        ::= { xfRadioLinkRltObjects 4 }

    xfCarrierTerminationCapabilityEntry OBJECT-TYPE
        SYNTAX XfCarrierTerminationCapabilityEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfCarrierTerminationCapabilityTable."
        INDEX { entLogicalIndex, xfRadioFrameId }
        ::= { xfCarrierTerminationCapabilityTable 1 }

    XfCarrierTerminationCapabilityEntry ::=
        SEQUENCE
        {
            xfRadioFrameId              Integer32,
            xfChannelSpacing            INTEGER,
            xfFrameFormatType           INTEGER,
            xfMinACMCapacity            Integer32,
            xfMaxACMCapacity            Integer32,
            xfACMProfile                BITS
        }

    xfRadioFrameId OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the Radio Frame Id."
        ::= { xfCarrierTerminationCapabilityEntry 1 }

    xfChannelSpacing OBJECT-TYPE
        SYNTAX      INTEGER
        {
            chspOther(1),
            chsp3500kHz(2),
            chsp7MHz(3),
            chsp10MHz(4),
            chsp14MHz(5),
            chsp20MHz(6),
            chsp28MHz(7),
            chsp30MHz(8),
            chsp40MHz(9),
            chsp50MHz(10),
            chsp56MHz(11),
            chsp60MHz(12),
            chsp80MHz(13),
            chsp112MHz(14)
        }

        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Channel spacing:
            - ETSI: 3.5, 7, 14, 28, 40, 56, 112 MHz
            - ANSI: 10, 20, 30, 40, 50, 60, 80 MHz"
        ::= { xfCarrierTerminationCapabilityEntry 2 }

    xfFrameFormatType OBJECT-TYPE
        SYNTAX      INTEGER
        {
            other(1),
            standard(2),
            xpic(3),
            mimo(4),
            longHaulStandard(5),
            longHaulXpic(6),
            xpic2boards(7),
            longHaulXpic2boards(8),
            mimo2boards(9),
            sisoCA(10),
            xpicCA(11)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the Frame Format type:
            - Standard
            - XPIC
            - MIMO
            - Long Haul Standard
            - Long Haul XPIC
            - XPIC on two boards
            - Long Haul XPIC on two boards
            "
        ::= { xfCarrierTerminationCapabilityEntry 3 }

    xfMinACMCapacity OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the minimum capacity designed for the specific frame format (Radio Frame Id)."
        ::= { xfCarrierTerminationCapabilityEntry 4 }

    xfMaxACMCapacity OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the maximum capacity designed for the frame format (Radio Frame Id)."
        ::= { xfCarrierTerminationCapabilityEntry 5 }

    xfACMProfile OBJECT-TYPE
        SYNTAX      BITS
        {
            none(0),
            qam4Strong(1),
            qam4Std(2),
            qam4Light(3),
            qam16Strong(4),
            qam16Std(5),
            qam16Light(6),
            qam32Strong(7),
            qam32Std(8),
            qam32Light(9),
            qam64Strong(10),
            qam64Std(11),
            qam64Light(12),
            qam128Strong(13),
            qam128Std(14),
            qam128Light(15),
            qam256Strong(16),
            qam256Std(17),
            qam256Light(18),
            qam512Strong(19),
            qam512Std(20),
            qam512Light(21),
            qam1024Strong(22),
            qam1024Std(23),
            qam1024Light(24),
            qam2048Strong(25),
            qam2048Std(26),
            qam2048Light(27),
            qam4096Strong(28),
            qam4096Std(29),
            qam4096Light(30),
            qam8192Strong(31),
            qam8192Std(32),
            qam8192Light(33),
            qam16384Strong(34),
            qam16384Std(35),
            qam16384Light(36)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It specifies which adaptive code and modulation profiles are supported."
        ::= { xfCarrierTerminationCapabilityEntry 6 }

----------------------------------------------------------------------------
-- xfACMProfileCapacityTable
----------------------------------------------------------------------------
    xfACMProfileCapacityTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfACMProfileCapacityEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This tables reports the ACM capacities of the selected Radio Frame Id per each Carrier Termination."
        ::= { xfRadioLinkRltObjects 5 }

    xfACMProfileCapacityEntry OBJECT-TYPE
        SYNTAX XfACMProfileCapacityEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfACMProfileCapacityTable."
        INDEX { entLogicalIndex, xfACMIndex  }
        ::= { xfACMProfileCapacityTable 1 }

     XfACMProfileCapacityEntry ::=
        SEQUENCE
        {
            xfACMIndex              CarrierTermACMIndex,
            xfACMCapacity           Integer32
        }

    xfACMIndex OBJECT-TYPE
        SYNTAX      CarrierTermACMIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the positional index of the bitmap xfACMProfile in xfCarrierTerminationCapabilityTable."
        ::= { xfACMProfileCapacityEntry 1 }

    xfACMCapacity OBJECT-TYPE
        SYNTAX      Integer32 (0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the capacity in Kbps of the ACM profile identified by the positional index
            xfACMIndex of the xfACMProfile in xfCarrierTerminationCapabilityTable.
            Value 0 means that the ACM profile is not included in current Frame Format."
        ::= { xfACMProfileCapacityEntry 2 }

------------------------------------------------------------------------------
-- xfRLTTable
------------------------------------------------------------------------------
    xfRLTTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLTEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to configure the Radio Link Terminal (RLT)."
        ::= { xfRadioLinkRltObjects 6 }

    xfRLTEntry OBJECT-TYPE
        SYNTAX XfRLTEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLTTable."
        INDEX { rltEntLogicalIndex }
        ::= { xfRLTTable 1 }

    XfRLTEntry ::=
        SEQUENCE
        {
            rltEntLogicalIndex                  Integer32,
            xfRLTDistinguishedName              DisplayString,
            xfRLTIpAddress                      IpAddress,
            xfRLTIPv6Address                    InetAddressIPv6,
            xfRLTNeName                         DisplayString,
            xfRLTNeType                         DisplayString,
            xfRLTId                             DisplayString,
            xfRLTExpectedFarEndId               DisplayString,
            xfRLTFarEndIdCheck                  INTEGER,
            xfRLTStatus                         INTEGER,
            xfRLTMode                           INTEGER,
            xfRLTActualTXTotalCapacity          Gauge32,
            xfRLTActualTXPacketCapacity         Gauge32,
            xfRLTLimitedTotalCapacity           Gauge32,
            xfRLTRltSeverity                    BITS,
            xfRLTCapability                     BITS,
            xfRLTInventoryLastChange            TimeTicks,
            xfRLTCpriMode                       INTEGER,
            xfRLTReset                          INTEGER,
            xfRLTMeasuredHopLength              INTEGER
        }

    rltEntLogicalIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the entLogicalIndex of the Radio Link Terminal (RLT).
            The logical entity identified by rltEntLogicalIndex is the same
            entity as identified by the same value of entLogicalIndex."
        ::= { xfRLTEntry 1 }

    xfRLTDistinguishedName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the distinguished name of the Radio Link Terminal (RLT): Rack/Slot/RLT number.
            It is the ifName of RL-WAN i/f."
        ::= { xfRLTEntry 2 }

    xfRLTIpAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "IPv4 address of the network element the Radio Link Terminal (RLT) belongs to."
        ::= { xfRLTEntry 3 }

    xfRLTIPv6Address OBJECT-TYPE
        SYNTAX      InetAddressIPv6
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "IPv6 Address of the network element the Radio Link Terminal (RLT) belongs to."
        ::= { xfRLTEntry 4 }

    xfRLTNeName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The name of the network element the Radio Link Terminal (RLT) belongs to (System Name - sysName)."
        ::= { xfRLTEntry 5 }

    xfRLTNeType OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The type of the network element the Radio Link Terminal (RLT) belongs to (System Descr - sysDescr)."
        ::= { xfRLTEntry 6 }

    xfRLTId OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Radio Link Terminal (RLT) identifier used for integrity check with far-end."
        ::= { xfRLTEntry 7 }

    xfRLTExpectedFarEndId OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Expected Id of far-end Radio Link Terminal (RLT), used for integrity check with near-end."
        ::= { xfRLTEntry 8 }

    xfRLTFarEndIdCheck OBJECT-TYPE
        SYNTAX      INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "When enabled, the system verifies that far-end Radio Link Terminal name is equal to the expected.
            If ok Radio Link Terminal status is UP. If not ok the Radio Link Terminal status is stated as DOWN.
            Default value: disabled.
            "
        ::= { xfRLTEntry 9 }

    xfRLTStatus OBJECT-TYPE
        SYNTAX      INTEGER
        {
            other(1),
            down(2),
            up(3),
            degraded(4),
            resourceUnavailable(5)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the operational status of the Radio Link Terminal (RLT)."
        ::= { xfRLTEntry 10 }

    xfRLTMode OBJECT-TYPE
        SYNTAX      INTEGER
        {
            other(1),
            onePlusZero(2),
            onePlusOneRadioLinkProtection(3),
            twoPlusZeroAdvancedRadioLinkBonding(4),
            onePlusOneRadioLinkProtectionAndEquipmentProtection(5),
            twoPlusZeroRadioLinkBondingAndEquipmentProtection(6),
            twoPlusTwoRadioLinkProtectionAndEquipmentProtection(7),
            fourPlusZeroRadioLinkBondingAndEquipmentProtection(8)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The mode of the Radio Link Terminal (RLT).
            Values:
            - 1+0: onePlusZero (default)
            - 1+1 RLP: onePlusOneRadioLinkProtection
            - 2+0 RLB: twoPlusZeroAdvancedRadioLinkBonding
            - 1+1 RLP EQP: onePlusOneRadioLinkProtectionAndEquipmentProtection
            - 2+0 RLB EQP: twoPlusZeroRadioLinkBondingAndEquipmentProtection
            - 2+2 RLP EQP: twoPlusTwoRadioLinkProtectionAndEquipmentProtection
            - 4+0 RLB EQP: fourPlusZeroRadioLinkBondingAndEquipmentProtection
            "
        ::= { xfRLTEntry 11 }

    xfRLTActualTXTotalCapacity OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "
            It represents the total transmitted capacity throughput (considering both Packet and TDM traffic),
            expressed in bps, of the Radio Link Terminal (RLT).
            "
        ::= { xfRLTEntry 12 }

    xfRLTActualTXPacketCapacity OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "
            It represents the transmitted packet capacity throughput (only packet traffic),
            expressed in bps, of the Radio Link Terminal (RLT).
            "
        ::= { xfRLTEntry 13 }

    xfRLTLimitedTotalCapacity OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "
            It represents the total transmitted capacity throughput (considering both Packet and TDM traffic),
            expressed in bps, of the Radio Link Terminal (RLT) limited by License.
            "
        ::= { xfRLTEntry 14 }

      xfRLTRltSeverity OBJECT-TYPE
        SYNTAX BITS
        {
            rltSeverity0(0),
            rltSeverity1(1),
            rltSeverity2(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            This object represents the highest severity alarm related to RLT with logical index 'rltEntLogicalIndex'.
            Node GUI uses the Far-End entry value (of this MIB MO) to define the colour of the Far-End RLT box in the hop view.
            "
        ::= { xfRLTEntry 15 }

      xfRLTCapability OBJECT-TYPE
        SYNTAX BITS
        {
          xpicCapability0(0),
          capTDMWithEQP(1),
          capCsPlurality(2),
          capCtAutoSelection(3),
          capOnePlusZero(4),
          capOnePlusOneRadioLinkProtection(5),
          capTwoPlusZeroAdvancedRadioLinkBonding(6),
          capOnePlusOneRadioLinkProtectionWithEQP(7),
          capTwoPlusZeroRadioLinkBondingWithEQP(8),
          capTwoPlusTwoRadioLinkProtectionWithEQP(9),
          capFourPlusZeroRadioLinkBondingWithEQP(10),
          capXpicBetweenBoards(11),
          capXpicMembersAutoSelection(12),
          capManualEqpSwitch(13),
          capEnhAcmMaxCapacity(14),
          capEnhAcmMaxProtection(15),
          capRLEncryption(16),
          capMIMO(17),
          capTXswoAndSSD(18)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            Each bit of this object represents an RLT capability:
            Bit 0 - XPIC capability
            Bit 1 - TDM capability
            Bit 2 - CsPlurality capability
            Bit 3 - CtAutoSelection capability
            Bit 4 - OnePlusZero capability
            Bit 5 - OnePlusOneRadioLinkProtection capability
            Bit 6 - TwoPlusZeroAdvancedRadioLinkBonding capability
            Bit 7 - OnePlusOneRadioLinkProtectionWithEQP capability
            Bit 8 - TwoPlusZeroRadioLinkBondingWithEQP capability
            Bit 9 - TwoPlusTwoRadioLinkProtectionWithEQP capability
            Bit 10 - FourPlusZeroRadioLinkBondingWithEQP capability
            Bit 11 - XPIC between boards capability
            Bit 12 - XPIC Members Auto Selection capability
            Bit 13 - Manual EQP Switch capability
            Bit 14 - Enhanced ACM Protection: Maximum Capacity capability
            Bit 15 - Enhanced ACM Protection: Maximum Protection capability
            Bit 16 - Radio Link Encryption capability
            Bit 17 - MIMO capability
            Bit 18 - TX swicthover and SSD capability
            "
        ::= { xfRLTEntry 16 }

      xfRLTInventoryLastChange OBJECT-TYPE
        SYNTAX TimeTicks
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            The value of sysUpTime at the time of the last creation or
            deletion of an entry in the xfRLTHierarchyModuleTable.
            If the current state was entered prior to the last
            re-initialization of the local network management subsystem,
            then this object contains a zero value.
            "
        ::= { xfRLTEntry 17 }

    xfRLTCpriMode OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Set the mode of the CPRI front-haul product.
       Default: notApplicable."
        ::= { xfRLTEntry 18 }

     xfRLTReset OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            rltNoReset(2),
            rltReset(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It resets RLT to default configuration."
        ::= { xfRLTEntry 19 }

     xfRLTMeasuredHopLength OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It represents the measured value of the radio hop length expressed in Km.
             Values:
              - Radio hop length measurement not yet available: -1;
              - Measured hop length in Km: > 0.
            "
        ::= { xfRLTEntry 20 }

------------------------------------------------------------------------------
-- xfTrafficTable
------------------------------------------------------------------------------
    xfTrafficTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfTrafficEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to map the TDM interface to the specified RLT."
        ::= { xfRadioLinkRltObjects 7 }

    xfTrafficEntry OBJECT-TYPE
        SYNTAX XfTrafficEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfTrafficEntry."
        INDEX { trEntLogicalIndex }
        ::= { xfTrafficTable 1 }

    XfTrafficEntry ::=
        SEQUENCE
        {
            trEntLogicalIndex       Integer32,
            xfTDMEnable             INTEGER
        }

    trEntLogicalIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the entLogicalIndex of the Radio Link Terminal (RLT).
            The logical entity identified by trEntLogicalIndex is the same
            interface as identified by the same value of entLogicalIndex."
        ::= { xfTrafficEntry 1 }

    xfTDMEnable OBJECT-TYPE
        SYNTAX      INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It allows to map TDM interface to a specific Radio Link Terminal (RLT).
            Default: disable."
        ::= { xfTrafficEntry 2 }

------------------------------------------------------------------------------
-- xfRLTDMIfTable
------------------------------------------------------------------------------
    xfRLTDMIfTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLTDMIfEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is an extention of the ifTable used to configure TDM interface."
        ::= { xfRadioLinkRltObjects 8 }

    xfRLTDMIfEntry OBJECT-TYPE
        SYNTAX XfRLTDMIfEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLTDMIfEntry."
        INDEX { xfRLTDMIfIndex }
        ::= { xfRLTDMIfTable 1 }

    XfRLTDMIfEntry ::=
        SEQUENCE
        {
            xfRLTDMIfIndex          Integer32,
            xfActualTDMCapacity     Integer32,
            xfWantedTDMAllocation   BITS,
            xfActualTDMAllocation   BITS,
            xfTDMIfAlarms           BITS,
            xfTDMRxLoop             INTEGER,
            xfTDMDistinguishedName  DisplayString,
            xfTDMMaxTributaries     INTEGER,
            xfTDMHopLength          INTEGER
        }

    xfRLTDMIfIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It is the ifIndex of RL TDM I/F table."
        ::= { xfRLTDMIfEntry 1 }

    xfActualTDMCapacity OBJECT-TYPE
        SYNTAX      Integer32 (0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the current tributary capacity."
        ::= { xfRLTDMIfEntry 2 }

    xfWantedTDMAllocation OBJECT-TYPE
        SYNTAX      BITS { firstE1(0) }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It represents the wanted tributary allocation."
        ::= { xfRLTDMIfEntry 3 }

    xfActualTDMAllocation OBJECT-TYPE
        SYNTAX      BITS { firstE1(0) }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It represents the actual tributary allocation."
        ::= { xfRLTDMIfEntry 4 }

     xfTDMIfAlarms OBJECT-TYPE
        SYNTAX BITS
        {
            ber0(0),
            ber1(1),
            ber2(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows TDM if related alarms."
        ::= { xfRLTDMIfEntry 5 }

     xfTDMRxLoop OBJECT-TYPE
        SYNTAX      INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It configures TDM RX loop:
            - other(1)
            - enable(2)
            - disable(3) (default)
            "
        ::= { xfRLTDMIfEntry 6 }

      xfTDMDistinguishedName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..31))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It is the disinguished name of TDM i/f, i.e. R/S/P."
        ::= { xfRLTDMIfEntry 7 }

      xfTDMMaxTributaries OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It represents the maximum number of tributaries that can be allocated to TDM i/f,
            depending on frame ID, minimum ACM profile configured and licensed capacity in each CTs of the RLT.
            The maximum number is limited to 80."
        ::= { xfRLTDMIfEntry 8 }

      xfTDMHopLength OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It represents the length of the radio hop expressed in Km.
            This is used to calculate the propagation delay over the radio hop
            that shall be compensated to guarantee TDM traffic error free.
            Values:
              - default value for delay compensation: -1
              - admissible range of values in Km: 0-200
            "
        ::= { xfRLTDMIfEntry 9 }


------------------------------------------------------------------------------
-- xfCGIfTable
------------------------------------------------------------------------------
    xfCGIfTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfCGIfEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is an extension of ifTable reporting the main characteristics of CG i/f."
        ::= { xfRadioLinkRltObjects 9 }

    xfCGIfEntry OBJECT-TYPE
        SYNTAX XfCGIfEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfCGIfEntry."
        INDEX { xfCGIfIndex }
        ::= { xfCGIfTable 1 }

    XfCGIfEntry ::=
        SEQUENCE
        {
            xfCGIfIndex           Integer32,
            xfCGIfMinSpeed        Integer32,
            xfCGIfMaxSpeed        Gauge32,
            xfCGIfRCNum           INTEGER,
            xfCGIfAlarms          BITS,
            xfCGIfHopViewStatus   INTEGER
        }

    xfCGIfIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It is the ifIndex of CG interface."
        ::= { xfCGIfEntry 1 }

     xfCGIfMinSpeed OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            The minimum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities.
            Note: in case of bonding configurations, it represents the minimum of the min speeds
            of all Carrier Terminations in the bonding group.
            "
        ::= { xfCGIfEntry 2 }

     xfCGIfMaxSpeed OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            The maximum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities.
            Note: in case of bonding configurations, it represents the sum of the max speeds
            of all Carrier Terminations in the bonding group.
            "
        ::= { xfCGIfEntry 3 }

     xfCGIfRCNum OBJECT-TYPE
        SYNTAX INTEGER (1..16)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Number of Carrier Termination members belonging to the CG group."
        ::= { xfCGIfEntry 4 }

     xfCGIfAlarms OBJECT-TYPE
        SYNTAX BITS
        {
            hccNe0(0),
            hccNe1(1),
            hccNe2(2),

            rltId0(3),
            rltId1(4),
            rltId2(5),

            txSwitchover0(6),
            txSwitchover1(7),
            txSwitchover2(8),

            remoteTxSwitchOver0(9),
            remoteTxSwitchOver1(10),
            remoteTxSwitchOver2(11),

            unableToProtect0(12),
            unableToProtect1(13),
            unableToProtect2(14),

            rfInputThresholdProtection0(15),
            rfInputThresholdProtection1(16),
            rfInputThresholdProtection2(17),

            unableToProtectEqp0(18),
            unableToProtectEqp1(19),
            unableToProtectEqp2(20)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows CG i/f related alarms."
        ::= { xfCGIfEntry 5 }

     xfCGIfHopViewStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            down(2),
            up(3)
         }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object represents the Hop View status.
            Up:   Far-End is reachable
            Down: Far-End not reachable

            The status is related to HCC-NE alarm.
            "
        ::= { xfCGIfEntry 6 }

------------------------------------------------------------------------------
-- xfXPICPairTable
------------------------------------------------------------------------------
    xfXPICPairTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfXPICPairEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to enable XPIC (Admid Status) and set the CT pair in XPIC."
        ::= { xfRadioLinkRltObjects 10 }

    xfXPICPairEntry OBJECT-TYPE
        SYNTAX XfXPICPairEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfXPICPairTable."
        INDEX { entLogicalIndex, xfXpicPairIndex }
        ::= { xfXPICPairTable 1 }

    XfXPICPairEntry ::=
        SEQUENCE
        {
            xpicPairEntLogicalIIndex    Integer32,
            xfXPICPairAdminStatus       INTEGER,
            xfXPICPairNumber            INTEGER,
            xfXPICPairRecovery          INTEGER,
            xfXPICPairRestore           INTEGER,
            xfXPICCTmember1             DisplayString,
            xfXPICCTmember2             DisplayString,
            xfXPICAutoRestore           INTEGER,
            xfXpicPairIndex             INTEGER
        }

     xpicPairEntLogicalIIndex OBJECT-TYPE
        SYNTAX Integer32  (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It represents the entLogicalIndex of the Radio Link Terminal (RLT).
            The logical entity identified by xpicPairEntLogicalIIndex is the same
            entity as identified by the same value of entLogicalIndex.
            "
        ::= { xfXPICPairEntry 1 }

     xfXPICPairAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Administrative status of XPIC pair.
             Default value: disable."
        ::= { xfXPICPairEntry 2 }

     xfXPICPairNumber OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It specifies the number used for identification of the XPIC pair."
        ::= { xfXPICPairEntry 3 }

    xfXPICPairRecovery OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It allows to enable/disable the recovery procedure when XPIC mode is enabled."
        ::= { xfXPICPairEntry 4 }

    xfXPICPairRestore OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            xpicNoRestore(2),
            xpicRestore(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Restore XPIC functionality after XPIC recovery has been triggered and resets
            XPIC Auto Restore procedure"
        ::= { xfXPICPairEntry 5 }

     xfXPICCTmember1 OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It specifies the first Carrier Termination (CT) member of the XPIC pair.
             The member is identified by the CT distinguished name (R/S/P).
            "
        ::= { xfXPICPairEntry 6 }

     xfXPICCTmember2 OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It specifies the second Carrier Termination (CT) member of the XPIC pair.
             The member is identified by the CT distinguished name (R/S/P).
            "
        ::= { xfXPICPairEntry 7 }

     xfXPICAutoRestore OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It enable/disables the XPIC Auto Recovery procedure.
            "
        ::= { xfXPICPairEntry 8 }

     xfXpicPairIndex OBJECT-TYPE
        SYNTAX INTEGER  (1..10)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It represents the table second index and is used to index the XPIC pair associated
             to Radio Link Terminal (RLT) with entLogicalIndex equal to xpicPairEntLogicalIIndex.
             It has been introduce to support configurations like 4+0 RLB EQP, 2+2 RLP EQP."
        ::= { xfXPICPairEntry 9 }

------------------------------------------------------------------------------
-- xfMIMOGroupTable
------------------------------------------------------------------------------
    xfMIMOGroupTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfMIMOGroupEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to enable MIMO (Admid Status) and set the CTs in MIMO group."
        ::= { xfRadioLinkRltObjects 11 }

    xfMIMOGroupEntry OBJECT-TYPE
        SYNTAX XfMIMOGroupEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfMIMOGroupTable."
        INDEX { entLogicalIndex }
        ::= { xfMIMOGroupTable 1 }

    XfMIMOGroupEntry ::=
        SEQUENCE
        {
            mimoGroupEntLogicalIIndex   Integer32,
            xfMIMOGroupAdminStatus      INTEGER,
            xfMIMOGroupNumber           INTEGER,
            xfMIMOGroupRecovery         INTEGER,
            xfMIMOGroupRestore          INTEGER,
            xfMIMOCTmember1             DisplayString,
            xfMIMOCTmember2             DisplayString,
            xfMIMOCTmember3             DisplayString,
            xfMIMOCTmember4             DisplayString
        }

      mimoGroupEntLogicalIIndex OBJECT-TYPE
        SYNTAX Integer32  (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It represents the entLogicalIndex of the Radio Link Terminal (RLT).
            The logical entity identified by mimoGroupEntLogicalIIndex is the same
            entity as identified by the same value of entLogicalIndex.
            "
        ::= { xfMIMOGroupEntry 1 }

     xfMIMOGroupAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Administrative status of MIMO group.
             Default value: disable.
            "
        ::= { xfMIMOGroupEntry 2 }

     xfMIMOGroupNumber OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It specifies the Number used for identification of the MIMO group.
            "
        ::= { xfMIMOGroupEntry 3 }

    xfMIMOGroupRecovery OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It allows to enable/disable the recovery procedure when MIMO mode is enabled."
        ::= { xfMIMOGroupEntry 4 }

    xfMIMOGroupRestore OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            mimoNoRestore(2),
            mimoRestore(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Restore MIMO functionality after MIMO recovery has been triggered."
        ::= { xfMIMOGroupEntry 5 }

    xfMIMOCTmember1 OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It specifies the first Carrier Termination (CT) member of the MIMO group.
             The member is identified by the CT distinguished name (R/S/P).
            "
        ::= { xfMIMOGroupEntry 6 }

    xfMIMOCTmember2 OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It specifies the second Carrier Termination (CT) member of the MIMO group.
             The member is identified by the CT distinguished name (R/S/P).
            "
        ::= { xfMIMOGroupEntry 7 }

    xfMIMOCTmember3 OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It specifies the third Carrier Termination (CT) member of the MIMO group.
             The member is identified by the CT distinguished name (R/S/P).
            "
        ::= { xfMIMOGroupEntry 8 }

    xfMIMOCTmember4 OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It specifies the forth Carrier Termination (CT) member of the MIMO group.
             The member is identified by the CT distinguished name (R/S/P).
            "
        ::= { xfMIMOGroupEntry 9 }

------------------------------------------------------------------------------
-- xfRLWANIfTable
------------------------------------------------------------------------------
    xfRLWANIfTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLWANIfEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to handle the RL-WAN i/f."
        ::= { xfRadioLinkRltObjects 12 }

    xfRLWANIfEntry OBJECT-TYPE
        SYNTAX XfRLWANIfEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLWANIfTable."
        INDEX { xfRLWANIfIndex }
        ::= { xfRLWANIfTable 1 }

    XfRLWANIfEntry ::=
        SEQUENCE
        {
            xfRLWANIfIndex                 Integer32,
            xfRLWANDistinguishedName       DisplayString,
            xfRLWANCompAdminStatus         INTEGER,
            xfRLWANCompConnStatus          INTEGER,
            xfRLWANMlhcMplsMode            INTEGER,
            xfRLWANMlhcOperStatus          INTEGER,
            xfRLWANPlcOperStatus           INTEGER,
            xfRLWANActualCapacity          Gauge32,
            xfRLWANLimitedCapacity         Gauge32
        }

  xfRLWANIfIndex OBJECT-TYPE
        SYNTAX Integer32  (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It is the table index.
            It contains the ifIndex value of the WAN interface.
            "
        ::= { xfRLWANIfEntry 1 }

  xfRLWANDistinguishedName OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It is the name uniquely identifying the RL-WAN interface within the system, i.e. R/S/P."
  ::= { xfRLWANIfEntry 2 }

  xfRLWANCompAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            down(2),
            mlhcUp(3),
            mlhcPlcUp(4)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It enables and disables MLHC and PLC on the RL-WAN interface.

             down(2): both MLHC and PLC are disabled.
             mlhcUp(3): only MLHC is enabled.
             mlhcPlcUp(4): both MLHC and PLC are enabled.
             Default:down(2).

             Compression can be enabled on only one of the two RL-WAN interfaces belonging to the same MMU.
             Any attempt to enable compression on both RL-WAN interfaces belonging to the same MMU is refused.
            "
        ::= { xfRLWANIfEntry 3 }

  xfRLWANCompConnStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            disconnected(2),
            connected(3)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "It specifies if the compression building block is physically connected to the RL-WAN interface.
             Physical connection of the compression building block to the RL-WAN interface is pre-requisite for enabling compression.

             When xfRLWANCompAdminStatus is set either to mlhcUp or mlhcPlcUp, the compression building block
             is physically connected to RL-WAN interfaces and xfRLWANCompConnStatus becomes connected.
             When xfRLWANCompAdminStatus is set either to mlhcUp or mlhcPlcUp on the other RL-WAN interface,
             the compression building block is physically connected to the other RL-WAN interfaces
             and xfRLWANCompConnStatus becomes disconnected.
            "
        ::= { xfRLWANIfEntry 4 }

  xfRLWANMlhcMplsMode OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            mplsOnly(2),
            controlWord(3),
            l2(4),
            l3(5)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "It specifies the wanted mpls mode.
            mplsOnly(2): Ethernet customer bridge, provider bridge and QinQ headers, including MPLS labels (up to 3) are compressed.
            controlWord(3): L2 VPN with Pseudo-Wire Control Word headers are compressed.
            l2(4): L2 VPN without Pseudo-Wire Control Word headers are compressed.
            l3(5): L3 VPN headers are compressed.
            Default: mplsOnly(2).

            This can be configured only if compression administrative status is down.
            "
        ::= { xfRLWANIfEntry 5 }

  xfRLWANMlhcOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            down(2),
            up(3)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Multi-Layer Header Compression operative status.
            "
        ::= { xfRLWANIfEntry 6 }

  xfRLWANPlcOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            down(2),
            up(3)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Payload Compression operative status.
            "
        ::= { xfRLWANIfEntry 7 }

  xfRLWANActualCapacity OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Actual Capacity (speed) of RL WAN interface, in bps.
            "
        ::= { xfRLWANIfEntry 8 }

  xfRLWANLimitedCapacity OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Capacity (speed) limited by license of RL WAN interface, in bps.
            "
        ::= { xfRLWANIfEntry 9 }

------------------------------------------------------------------------------
-- xfRLTHierarchyModuleTable
------------------------------------------------------------------------------
    xfRLTHierarchyModuleTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLTHierarchyModuleEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to handle Module (MMU - RAU) hierarchy for the specific RLT."
        ::= { xfRadioLinkRltObjects 13 }

    xfRLTHierarchyModuleEntry OBJECT-TYPE
        SYNTAX XfRLTHierarchyModuleEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLTHierarchyModuleTable."
        INDEX { xfRLTMHIndex, xfRLTModuleIndex }
        ::= { xfRLTHierarchyModuleTable 1 }

    XfRLTHierarchyModuleEntry ::=
        SEQUENCE
        {
            xfRLTMHIndex                   Integer32,
            xfRLTModuleIndex               Integer32,
            xfRLTEntPhysicalIndex          Integer32,
            xfRLTPhysicalCointainedIn      Integer32,
            xfRLTPhysicalParentRelPos      Integer32,
            xfRLTEntityPhysicalDescr       DisplayString,
            xfRLTModuleSlotPosition        Integer32,
            xfRLTNEDistinguishedName       DisplayString,
            xfRLTFEDistinguishedName       DisplayString,
            xfRLTInterfaceIndex            Integer32,
            xfRLTHighestSeverityAlarm      INTEGER
        }

   xfRLTMHIndex OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It is the table index.
             It contains the entPhisycalIndex of the WAN port associated to the RLT.
            "
        ::= { xfRLTHierarchyModuleEntry 1 }

   xfRLTModuleIndex OBJECT-TYPE
        SYNTAX Integer32 (1..1000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It is the table index.
             It is a sequential number referred to the module (entity), either MMU or RAU, constituting the RLT.
            "
        ::= { xfRLTHierarchyModuleEntry 2 }

   xfRLTEntPhysicalIndex OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents the value of entPhysicalIndex of the module, either MMU or RAU,
             constituting the RLT.
            "
        ::= { xfRLTHierarchyModuleEntry 3 }

   xfRLTPhysicalCointainedIn OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents the value of entPhysicalIndex for the physical entity which
           'contains' this physical entity, which is either MMU or RAU (constituting the RLT).
            "
        ::= { xfRLTHierarchyModuleEntry 4 }

   xfRLTPhysicalParentRelPos OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents the indication of the relative position of this 'child'
           component among all its 'sibling' components.
            "
        ::= { xfRLTHierarchyModuleEntry 5 }

    xfRLTEntityPhysicalDescr OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents a textual description of physical entity (module),
             either MMU or RAU, constituting the RLT.
            "
        ::= { xfRLTHierarchyModuleEntry 6 }

    xfRLTModuleSlotPosition OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents the slot position of the physical entity (module),
             either MMU or RAU, constituting the RLT.
            "
        ::= { xfRLTHierarchyModuleEntry 7 }

    xfRLTFEDistinguishedName OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents the distinguished name of the Near-End logical entity,
             either RLT or CT.
            "
        ::= { xfRLTHierarchyModuleEntry 8 }

    xfRLTNEDistinguishedName OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents the distinguished name of the Far-End logical entity,
             either RLT or CT.
            "
        ::= { xfRLTHierarchyModuleEntry 9 }

   xfRLTInterfaceIndex OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO represents the value of ifIndex of the interface, either CG IF (Bonding/RLP) or RAU IF,
             constituting the RLT.
            "
        ::= { xfRLTHierarchyModuleEntry 10 }

   xfRLTHighestSeverityAlarm OBJECT-TYPE
        SYNTAX INTEGER
        {
            critical(0),
            major(1),
            minor(2),
            warning(3),
            clear(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
             This MO reports the highest severity of the alarms active in the physical module, MMU or RAU, it refers to.
             Value list:
                - critical(0): highest severity is Critical;
                - major(1):    highest severity is Major;
                - minor(2):    highest severity is Minor;
                - warning(3):  highest severity is Warning;
                - clear(4):    no alarm.

            "
        ::= { xfRLTHierarchyModuleEntry 11 }

------------------------------------------------------------------------------
-- xfRLTProtectionTable
------------------------------------------------------------------------------
    xfRLTProtectionTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLTProtectionEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to handle RL Protection for the RLT whose mode is set 1+1RLP."
        ::= { xfRadioLinkRltObjects 14 }

    xfRLTProtectionEntry OBJECT-TYPE
        SYNTAX XfRLTProtectionEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLTProtectionTable."
        INDEX { xfRLTProtIndex}
        ::= { xfRLTProtectionTable 1 }

    XfRLTProtectionEntry ::=
        SEQUENCE
        {
            xfRLTProtIndex                         Integer32,
            xfRLTProtectionSwitchMode              INTEGER,
            xfRLTProtectionStatus                  INTEGER,
            xfRLTRevertivePreferredTX              DisplayString,
            xfRLTProtectionWaitToRestoreTime       INTEGER,
            xfRLTFadeNotificationTimer             INTEGER,
            xfRLTManualSwitchCommand               INTEGER,
            xfRLTTxSwitchOverConfiguration         INTEGER,
            xfRLTTxSwitchOverAlarmReset            INTEGER,
            xfRLTNumOfRLPSwitch                    Integer32,
            xfRLTEnhancedACMProtectionMode         INTEGER,
            xfRLTEnhancedACMProtectionOperStatus   INTEGER
        }

  xfRLTProtIndex OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It is the table index.
             It contains the entity logical index of the RLT configured in 1+1RLP.
            "
        ::= { xfRLTProtectionEntry 1 }

  xfRLTProtectionSwitchMode OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            auto(2),
            manual(3),
            autoRevertive(4),
            txSwitchDisable(5)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The mode in which the switching mechanism is configured.
             Auto:   System automatically switches from the degraded to the other transmitter (Tx).
             Manual: Automatic switching is disabled and operator can select Tx manually.
             Auto & Revertive:  makes it possible to manually set the preferred Tx.
             TX switch disable: Selective Space Diverity, SSD.
                                RLP TX switch is disabled.
                                The two received signals, from different paths, are combined.

             Default: AUTO (for RLT mode RLP) & NA (default for RLT mode RLB).
            "
        ::= { xfRLTProtectionEntry 2 }

  xfRLTProtectionStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            unprotected(2),
            protected(3),
            unableToProtect(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Status of the protection, when configured in a protected mode.
             Values:
             - unprotected;
             - protected
             - unableToProtect

             Note:
             Applicable only when RLT-mode is RL protection.
            "
        ::= { xfRLTProtectionEntry 3 }

  xfRLTRevertivePreferredTX OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..31))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It specifies the preferred TX Radio Carrier Termination (CT) in revertive protection mode.
             The member is identified by the CT distinguished name (R/S/P).
            "
        ::= { xfRLTProtectionEntry 4 }

  xfRLTProtectionWaitToRestoreTime OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The time, in # of seconds, to wait before switching back to the preferred Tx in Auto & Revertive mode.

             Default: 0.
            "
        ::= { xfRLTProtectionEntry 5 }

  xfRLTFadeNotificationTimer OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Notifications for alarms caused by fading, with a duration less than the specified time (0 - 1000 seconds) are not sent.
             Only applicable for protected configurations.

             Default: 200.
            "
        ::= { xfRLTProtectionEntry 6 }

  xfRLTManualSwitchCommand OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            txManualSwitch(2),
            txManualNoSwitch(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Used to request a TX switch-over.
             Applicable for protected configurations and when protectionSwitchMode is set to Manual.
             Not Applicable for RLT mode RLB

             Value:
             - txManualSwitch
             - txManualNoSwitch.
            "
        ::= { xfRLTProtectionEntry 7 }

  xfRLTTxSwitchOverConfiguration OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            notSupported(2),
            enable(3),
            disable(4),
            enableLocal(5)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Enable or disable the function to switch TX on a request from far-end, including also the TX switchover alarm notifications , both local and remote. Only applicable in RLT mode RLP.

             Values:
             - notSupported: (default for RLT in RLB mode)
             - enable:       TX switchover triggered by local and remote faults
             - disable:      TX switchover disabled(default for RLT in RLP mode) - DEPRECATED
             - enableLocal:  TX switchover triggered by local faults only (default for RLT in RLP mode)
            "
        ::= { xfRLTProtectionEntry 8 }

  xfRLTTxSwitchOverAlarmReset OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            txSwitchOverAlarmNoReset(2),
            txSwitchOverAlarmReset(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Used to manual reset the TX switch-over alarm and Remote TX switchover alarm (consequently to TX switch ordered from far-end).
             Note: the alarm is raised when TX Switch far-end function is enabled (xfRLTTxSwitchOverConfiguration).

             Value:
             - txSwitchOverAlarmNoReset
             - txSwitchOverAlarmReset.
            "
        ::= { xfRLTProtectionEntry 9 }

  xfRLTNumOfRLPSwitch OBJECT-TYPE
        SYNTAX Integer32 (0..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It represents the number of RLP Radio TX switch.
            "
        ::= { xfRLTProtectionEntry 10 }

  xfRLTEnhancedACMProtectionMode OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            activeTransmitter(2),
            maximumCapacity(3),
            maximumProtection(4)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "It configures the enhanced ACM protection mode. The enhanced ACM protection uses RX indicators from both the working and the protection links
             to select an ACM profile to optimize capacity (throughput) and/or protection (robustness).

             Values:
             - Active Transmitter        : ACM engine determines the ACM profile according to the working Rx ACM indications only;
             - Maximum Capacity (default): Working Rx ACM engine is aware of the ACM profile requests from the
                                           protection Rx ACM engine, and determines the highest ACM profile between
                                           the working and the protection links;
             - Maximum Protection        : Working Rx ACM engine is aware of the protection Rx ACM engine's ACM
                                           profile requests, and determines the lowest ACM profile between the working
                                           and the protection links.
            "
        ::= { xfRLTProtectionEntry 11 }

  xfRLTEnhancedACMProtectionOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            notApplicable(2),
            enhAcmProtActive(3),
            enhAcmProtNotActive(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Status of the enhanched ACM protection engine, when ACM engine is configured either in maximum-troughtput or maximum-protection mode.

             Values:
             - notApplicable      : when enhanced ACM protection mode is basic;
             - enhAcmProtActive   : when the enhanced ACM engine is working and the highest ACM profile is selected
                                    between the working and the protection links;
             - enhAcmProtNotActive: when the enhanced ACM engine is not working.
            "
        ::= { xfRLTProtectionEntry 12 }


------------------------------------------------------------------------------
-- xfRLTEncryptionTable
------------------------------------------------------------------------------
    xfRLTEncryptionTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLTEncryptionEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to handle Radio Link Encryption."
        ::= { xfRadioLinkRltObjects 15 }

    xfRLTEncryptionEntry OBJECT-TYPE
        SYNTAX XfRLTEncryptionEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLTEncryptionTable."
        INDEX { xfRLTEncryptionIndex}
        ::= { xfRLTEncryptionTable 1 }

    XfRLTEncryptionEntry ::=
        SEQUENCE
        {
            xfRLTEncryptionIndex             Integer32,
            xfRLTEncryptionAdminStatus       INTEGER,
            xfRLTEncryptionOperStatus        INTEGER,
            xfRLTEncryptionMasterKey         DisplayString
        }

  xfRLTEncryptionIndex OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It represents the xfRLTEncryptionTable index and is the RLT entity logical index."
        ::= { xfRLTEncryptionEntry 1 }

  xfRLTEncryptionAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            enable(2),
            disable(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This MO allows to enable/disable the Encryption of both control and traffic plain over the Radio Link hop.
             Values:
              - enable;
              - disable.

             Default: DISABLE.
            "
        ::= { xfRLTEncryptionEntry 2 }

  xfRLTEncryptionOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            up(2),
            down(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This MO represents the Operative Status of the Encryption function over the Radio Link hop
             and refers to receiving direction. Therefore, it indicates if the receiving side is able or
             not able to correctly/successfully decipher the ciphered data stream transmitted from remote side..
             The ecryption status can assume the values:
              - up: control and traffic plain are correctly deciphered;
              - down: control and traffic plain are not deciphered correctly/successfully, due to e.g. authentication failure, disturbance over the radio-hop.
            "
        ::= { xfRLTEncryptionEntry 3 }

  xfRLTEncryptionMasterKey OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..63))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This MO allows to define the Master Key used to initiate the Encryption operation.
             Master Key is hidden.
            "
        ::= { xfRLTEncryptionEntry 4 }

--
------------------------------------------------------------------------------
-- xfRadioLinkRltPmObjects
------------------------------------------------------------------------------
-- The xfRadioLinkRltPmObjects MOs

------------------------------------------------------------------------------
-- xfRLPMContinuousCounterTable
------------------------------------------------------------------------------
    xfRLPMContinuousCounterTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMContinuousCounterEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table for RLT performance data."
        ::= { xfRadioLinkRltPmObjects 1 }

    xfRLPMContinuousCounterEntry OBJECT-TYPE
        SYNTAX XfRLPMContinuousCounterEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLPMContinuousCounterTable."
        INDEX { ifIndex }
        ::= { xfRLPMContinuousCounterTable 1 }

    XfRLPMContinuousCounterEntry ::=
        SEQUENCE
        {
            xfPMTimeElapsed         PerfIntervalCount,
            xfPMCurrentES           PerfCurrentCount,
            xfPMCurrentSES          PerfCurrentCount,
            xfPMCurrentBBE          HCPerfCurrentCount,
            xfPMCurrentUAS          PerfCurrentCount,
            xfPMCurrentBB           HCPerfCurrentCount,
            xfPMPerfReset           INTEGER,
            xfPMCurrentESR          PerfCurrentCount,
            xfPMCurrentSESR         PerfCurrentCount,
            xfPMCurrentBBER         HCPerfCurrentCount
        }

    xfPMTimeElapsed OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            The number of seconds that have elapsed since the beginning
            of the current error-measurement period.
            If the current interval exceeds the maximum
            value, the agent will return the maximum value.
            Reset by xfPMPerfReset.
            "
        ::= { xfRLPMContinuousCounterEntry 1 }

    xfPMCurrentES OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows the errored seconds.
             Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 2 }

    xfPMCurrentSES OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows the severely errored seconds.
             Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 3 }

    xfPMCurrentBBE OBJECT-TYPE
        SYNTAX HCPerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows the background block errors.
            Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 4 }

    xfPMCurrentUAS OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows the unavailable seconds (or unavailable time).
              Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 5 }

    xfPMCurrentBB OBJECT-TYPE
        SYNTAX HCPerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object shows the background blocks.
             Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 6 }

    xfPMPerfReset OBJECT-TYPE
        SYNTAX INTEGER
        {
            other(1),
            noReset(2),
            reset(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "
            This object is used to reset the performance counters:
                - Elapsed Time, ES, SES, BBE, BB
                - PM ACM
                - ETSI - EN 301 129 (TLTS, RLTS, ...) current/interval 15m/24h
                - Max and Min XPI/MSE current/interval 15m/24h

            It can be also set when the RAU is not present.
            Near end access: read-write.
            "
        ::= { xfRLPMContinuousCounterEntry 7 }

    xfPMCurrentESR OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The ratio of ES to total seconds in available time during a
             fixed measurement interval.
             Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 8 }

    xfPMCurrentSESR OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The ratio of SES to total seconds in available time
             during a fixed measurement interval.
             Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 9 }

    xfPMCurrentBBER OBJECT-TYPE
        SYNTAX HCPerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The ratio of Background Block Errors (BBE) to total blocks in
             available time during a fixed measurement interval.
             Reset by xfPMPerfReset."
        ::= { xfRLPMContinuousCounterEntry 10 }

------------------------------------------------------------------------------
-- xfRLPMACMConfigTable
------------------------------------------------------------------------------
    xfRLPMACMConfigTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMACMConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Alarm threshold values for RL PM."
        ::= { xfRadioLinkRltPmObjects 2 }

    xfRLPMACMConfigEntry OBJECT-TYPE
        SYNTAX XfRLPMACMConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the xfRLPMACMConfigTable"
        INDEX { ifIndex }
        ::= { xfRLPMACMConfigTable 1 }

    XfRLPMACMConfigEntry ::=
        SEQUENCE
        {
            xfPMACMSetThreshold15m      Integer32,
            xfPMACMSetThreshold24h      Integer32,
            xfPMACMResetThreshold15m    Integer32,
            xfPMACMStatus               BITS,
            xfPMACMValidData            BITS
        }

    xfPMACMSetThreshold15m OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The 15 minute set threshold for minimum modulation.
            Near end access: read-write.
            Far end access: no access.
            Default value is 180.
            "
        ::= { xfRLPMACMConfigEntry 1 }

    xfPMACMSetThreshold24h OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The 24 hour set threshold for minimum modulation.
            Near end access: read-write.
            Far end access: no access.
            Default value is 1500.
            "
        ::= { xfRLPMACMConfigEntry 2 }

    xfPMACMResetThreshold15m OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The 15 minute reset threshold for minimum modulation.
            Near end access: read-write.
            Far end access: no access.
            Default value is 20.
            "
        ::= { xfRLPMACMConfigEntry 3 }

    xfPMACMStatus OBJECT-TYPE
        SYNTAX BITS
        {
            acm15m0(0),
            acm15m1(1),
            acm15m2(2),
            acm24h0(3),
            acm24h1(4),
            acm24h2(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "
            It reports threshold crossing alarm status:
            - acm15m: ACM 15 min threshold crossing: ACM has been in the lowest configured profile
                      for a number of seconds exceeding the configured 15 min threshold.
            - acm24h: ACM 24 hour threshold crossing: ACM has been in the lowest configured profile
                      for a number of seconds exceeding the configured 24 hour threshold.
            "
        ::= { xfRLPMACMConfigEntry 4 }

    xfPMACMValidData OBJECT-TYPE
        SYNTAX BITS
        {
            valid15m4QAMStrong(0),
            valid15m4QAMStd(1),
            valid15m4QAMLight(2),
            valid15m16QAMStrong(3),
            valid15m16QAMStd(4),
            valid15m16QAMLight(5),
            valid15m32QAMStrong(6),
            valid15m32QAMStd(7),
            valid15m32QAMLight(8),
            valid15m64QAMStrong(9),
            valid15m64QAMStd(10),
            valid15m64QAMLight(11),
            valid15m128QAMStrong(12),
            valid15m128QAMStd(13),
            valid15m128QAMLight(14),
            valid15m256QAMStrong(15),
            valid15m256QAMStd(16),
            valid15m256QAMLight(17),
            valid15m512QAMStrong(18),
            valid15m512QAMStd(19),
            valid15m512QAMLight(20),
            valid15m1024QAMStrong(21),
            valid15m1024QAMStd(22),
            valid15m1024QAMLight(23),
            valid15m2048QAMStrong(24),
            valid15m2048QAMStd(25),
            valid15m2048QAMLight(26),
            valid15m4096QAMStrong(27),
            valid15m4096QAMStd(28),
            valid15m4096QAMLight(29),
            valid15m8192QAMStrong(30),
            valid15m8192QAMStd(31),
            valid15m8192QAMLight(32),
            valid15m16384QAMStrong(33),
            valid15m16384QAMStd(34),
            valid15m16384QAMLight(35)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "It reports which ACM's PM data are valid."
        ::= { xfRLPMACMConfigEntry 5 }

------------------------------------------------------------------------------
-- xfRLPMACMCurrent24hTable
------------------------------------------------------------------------------
    xfRLPMACMCurrent24hTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMACMCurrent24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "ACM-based counters for current 24h table."
        ::= { xfRadioLinkRltPmObjects 3 }

    xfRLPMACMCurrent24hEntry OBJECT-TYPE
        SYNTAX XfRLPMACMCurrent24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the xfRLPMACMCurrent24hTable."
        INDEX { ifIndex }
        ::= { xfRLPMACMCurrent24hTable 1 }

    XfRLPMACMCurrent24hEntry ::=
        SEQUENCE
        {
            xfPMACMCurrent24h4QAMStrong         PerfCurrentCount,
            xfPMACMCurrent24h4QAMStd            PerfCurrentCount,
            xfPMACMCurrent24h4QAMLight          PerfCurrentCount,
            xfPMACMCurrent24h16QAMStrong        PerfCurrentCount,
            xfPMACMCurrent24h16QAMStd           PerfCurrentCount,
            xfPMACMCurrent24h16QAMLight         PerfCurrentCount,
            xfPMACMCurrent24h32QAMStrong        PerfCurrentCount,
            xfPMACMCurrent24h32QAMStd           PerfCurrentCount,
            xfPMACMCurrent24h32QAMLight         PerfCurrentCount,
            xfPMACMCurrent24h64QAMStrong        PerfCurrentCount,
            xfPMACMCurrent24h64QAMStd           PerfCurrentCount,
            xfPMACMCurrent24h64QAMLight         PerfCurrentCount,
            xfPMACMCurrent24h128QAMStrong       PerfCurrentCount,
            xfPMACMCurrent24h128QAMStd          PerfCurrentCount,
            xfPMACMCurrent24h128QAMLight        PerfCurrentCount,
            xfPMACMCurrent24h256QAMStrong       PerfCurrentCount,
            xfPMACMCurrent24h256QAMStd          PerfCurrentCount,
            xfPMACMCurrent24h256QAMLight        PerfCurrentCount,
            xfPMACMCurrent24h512QAMStrong       PerfCurrentCount,
            xfPMACMCurrent24h512QAMStd          PerfCurrentCount,
            xfPMACMCurrent24h512QAMLight        PerfCurrentCount,
            xfPMACMCurrent24h1024QAMStrong      PerfCurrentCount,
            xfPMACMCurrent24h1024QAMStd         PerfCurrentCount,
            xfPMACMCurrent24h1024QAMLight       PerfCurrentCount,
            xfPMACMCurrent24h2048QAMStrong      PerfCurrentCount,
            xfPMACMCurrent24h2048QAMStd         PerfCurrentCount,
            xfPMACMCurrent24h2048QAMLight       PerfCurrentCount,
            xfPMACMCurrent24h4096QAMStrong      PerfCurrentCount,
            xfPMACMCurrent24h4096QAMStd         PerfCurrentCount,
            xfPMACMCurrent24h4096QAMLight       PerfCurrentCount,
            xfPMACMCurrent24h8192QAMStrong      PerfCurrentCount,
            xfPMACMCurrent24h8192QAMStd         PerfCurrentCount,
            xfPMACMCurrent24h8192QAMLight       PerfCurrentCount,
            xfPMACMCurrent24h16384QAMStrong     PerfCurrentCount,
            xfPMACMCurrent24h16384QAMStd        PerfCurrentCount,
            xfPMACMCurrent24h16384QAMLight      PerfCurrentCount
        }

    xfPMACMCurrent24h4QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 1 }

    xfPMACMCurrent24h4QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 2 }

    xfPMACMCurrent24h4QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 3 }

    xfPMACMCurrent24h16QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 4 }

    xfPMACMCurrent24h16QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 5 }

    xfPMACMCurrent24h16QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 6 }

    xfPMACMCurrent24h32QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 7 }

    xfPMACMCurrent24h32QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 8 }

    xfPMACMCurrent24h32QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 9 }

    xfPMACMCurrent24h64QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 10 }

    xfPMACMCurrent24h64QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 11 }

    xfPMACMCurrent24h64QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 12 }

    xfPMACMCurrent24h128QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 13 }

    xfPMACMCurrent24h128QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 14 }

    xfPMACMCurrent24h128QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 15 }

    xfPMACMCurrent24h256QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 16 }

    xfPMACMCurrent24h256QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 17 }

    xfPMACMCurrent24h256QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 18 }

    xfPMACMCurrent24h512QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 19 }

    xfPMACMCurrent24h512QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 20 }

    xfPMACMCurrent24h512QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 21 }

    xfPMACMCurrent24h1024QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 22 }

    xfPMACMCurrent24h1024QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 23 }

    xfPMACMCurrent24h1024QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 24 }

    xfPMACMCurrent24h2048QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 25 }

    xfPMACMCurrent24h2048QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 26 }

    xfPMACMCurrent24h2048QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 27 }

    xfPMACMCurrent24h4096QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 28 }

    xfPMACMCurrent24h4096QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 29 }

    xfPMACMCurrent24h4096QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 30 }

     xfPMACMCurrent24h8192QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 31 }

    xfPMACMCurrent24h8192QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 32 }

    xfPMACMCurrent24h8192QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 33 }

    xfPMACMCurrent24h16384QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 34 }

    xfPMACMCurrent24h16384QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 35 }

    xfPMACMCurrent24h16384QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid time since reset."
        ::= { xfRLPMACMCurrent24hEntry 36 }


------------------------------------------------------------------------------
-- xfRLPMACMInterval24hTable
------------------------------------------------------------------------------
    xfRLPMACMInterval24hTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMACMInterval24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "ACM-based counters for interval 24h table."
        ::= { xfRadioLinkRltPmObjects 4 }

    xfRLPMACMInterval24hEntry OBJECT-TYPE
        SYNTAX XfRLPMACMInterval24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the xfRLPMACMInterval24hTable."
        INDEX { ifIndex }
        ::= { xfRLPMACMInterval24hTable 1 }

    XfRLPMACMInterval24hEntry ::=
        SEQUENCE
        {
            xfPMACMInterval24h4QAMStrong        PerfIntervalCount,
            xfPMACMInterval24h4QAMStd           PerfIntervalCount,
            xfPMACMInterval24h4QAMLight         PerfIntervalCount,
            xfPMACMInterval24h16QAMStrong       PerfIntervalCount,
            xfPMACMInterval24h16QAMStd          PerfIntervalCount,
            xfPMACMInterval24h16QAMLight        PerfIntervalCount,
            xfPMACMInterval24h32QAMStrong       PerfIntervalCount,
            xfPMACMInterval24h32QAMStd          PerfIntervalCount,
            xfPMACMInterval24h32QAMLight        PerfIntervalCount,
            xfPMACMInterval24h64QAMStrong       PerfIntervalCount,
            xfPMACMInterval24h64QAMStd          PerfIntervalCount,
            xfPMACMInterval24h64QAMLight        PerfIntervalCount,
            xfPMACMInterval24h128QAMStrong      PerfIntervalCount,
            xfPMACMInterval24h128QAMStd         PerfIntervalCount,
            xfPMACMInterval24h128QAMLight       PerfIntervalCount,
            xfPMACMInterval24h256QAMStrong      PerfIntervalCount,
            xfPMACMInterval24h256QAMStd         PerfIntervalCount,
            xfPMACMInterval24h256QAMLight       PerfIntervalCount,
            xfPMACMInterval24h512QAMStrong      PerfIntervalCount,
            xfPMACMInterval24h512QAMStd         PerfIntervalCount,
            xfPMACMInterval24h512QAMLight       PerfIntervalCount,
            xfPMACMInterval24h1024QAMStrong     PerfIntervalCount,
            xfPMACMInterval24h1024QAMStd        PerfIntervalCount,
            xfPMACMInterval24h1024QAMLight      PerfIntervalCount,
            xfPMACMInterval24h2048QAMStrong     PerfIntervalCount,
            xfPMACMInterval24h2048QAMStd        PerfIntervalCount,
            xfPMACMInterval24h2048QAMLight      PerfIntervalCount,
            xfPMACMInterval24h4096QAMStrong     PerfIntervalCount,
            xfPMACMInterval24h4096QAMStd        PerfIntervalCount,
            xfPMACMInterval24h4096QAMLight      PerfIntervalCount,
            xfPMACMInterval24hValidData         TruthValue,
            xfPMACMInterval24h8192QAMStrong     PerfIntervalCount,
            xfPMACMInterval24h8192QAMStd        PerfIntervalCount,
            xfPMACMInterval24h8192QAMLight      PerfIntervalCount,
            xfPMACMInterval24h16384QAMStrong    PerfIntervalCount,
            xfPMACMInterval24h16384QAMStd       PerfIntervalCount,
            xfPMACMInterval24h16384QAMLight     PerfIntervalCount
        }

    xfPMACMInterval24h4QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 1 }

    xfPMACMInterval24h4QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 2 }

    xfPMACMInterval24h4QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 3 }

    xfPMACMInterval24h16QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 4 }

    xfPMACMInterval24h16QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 5 }

    xfPMACMInterval24h16QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 6 }

    xfPMACMInterval24h32QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 7 }

    xfPMACMInterval24h32QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 8 }

    xfPMACMInterval24h32QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 9 }

    xfPMACMInterval24h64QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 10 }

    xfPMACMInterval24h64QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 11 }

    xfPMACMInterval24h64QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 12 }

    xfPMACMInterval24h128QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 13 }

    xfPMACMInterval24h128QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 14 }

    xfPMACMInterval24h128QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 15 }

    xfPMACMInterval24h256QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 16 }

    xfPMACMInterval24h256QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 17 }

    xfPMACMInterval24h256QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 18 }

    xfPMACMInterval24h512QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 19 }

    xfPMACMInterval24h512QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 20 }

    xfPMACMInterval24h512QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 21 }

    xfPMACMInterval24h1024QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 22 }

    xfPMACMInterval24h1024QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 23 }

    xfPMACMInterval24h1024QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 24 }

    xfPMACMInterval24h2048QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 25 }

    xfPMACMInterval24h2048QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 26 }

    xfPMACMInterval24h2048QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 27 }

    xfPMACMInterval24h4096QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 28 }

    xfPMACMInterval24h4096QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 29 }

    xfPMACMInterval24h4096QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 30 }

    xfPMACMInterval24hValidData OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This variable indicates whether the data for this interval is valid."
        ::= { xfRLPMACMInterval24hEntry 31 }

    xfPMACMInterval24h8192QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 32 }

    xfPMACMInterval24h8192QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 33 }

    xfPMACMInterval24h8192QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 34 }

    xfPMACMInterval24h16384QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 35 }

    xfPMACMInterval24h16384QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 36 }

    xfPMACMInterval24h16384QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval24hEntry 37 }

------------------------------------------------------------------------------
-- xfRLPMACMCurrent15mTable
------------------------------------------------------------------------------
    xfRLPMACMCurrent15mTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMACMCurrent15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "ACM-based counters for current 15m table."
        ::= { xfRadioLinkRltPmObjects 5 }

    xfRLPMACMCurrent15mEntry OBJECT-TYPE
        SYNTAX XfRLPMACMCurrent15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the table."
        INDEX { ifIndex }
        ::= { xfRLPMACMCurrent15mTable 1 }

    XfRLPMACMCurrent15mEntry ::=
        SEQUENCE
        {
            xfPMACMCurrent15m4QAMStrong         PerfCurrentCount,
            xfPMACMCurrent15m4QAMStd            PerfCurrentCount,
            xfPMACMCurrent15m4QAMLight          PerfCurrentCount,
            xfPMACMCurrent15m16QAMStrong        PerfCurrentCount,
            xfPMACMCurrent15m16QAMStd           PerfCurrentCount,
            xfPMACMCurrent15m16QAMLight         PerfCurrentCount,
            xfPMACMCurrent15m32QAMStrong        PerfCurrentCount,
            xfPMACMCurrent15m32QAMStd           PerfCurrentCount,
            xfPMACMCurrent15m32QAMLight         PerfCurrentCount,
            xfPMACMCurrent15m64QAMStrong        PerfCurrentCount,
            xfPMACMCurrent15m64QAMStd           PerfCurrentCount,
            xfPMACMCurrent15m64QAMLight         PerfCurrentCount,
            xfPMACMCurrent15m128QAMStrong       PerfCurrentCount,
            xfPMACMCurrent15m128QAMStd          PerfCurrentCount,
            xfPMACMCurrent15m128QAMLight        PerfCurrentCount,
            xfPMACMCurrent15m256QAMStrong       PerfCurrentCount,
            xfPMACMCurrent15m256QAMStd          PerfCurrentCount,
            xfPMACMCurrent15m256QAMLight        PerfCurrentCount,
            xfPMACMCurrent15m512QAMStrong       PerfCurrentCount,
            xfPMACMCurrent15m512QAMStd          PerfCurrentCount,
            xfPMACMCurrent15m512QAMLight        PerfCurrentCount,
            xfPMACMCurrent15m1024QAMStrong      PerfCurrentCount,
            xfPMACMCurrent15m1024QAMStd         PerfCurrentCount,
            xfPMACMCurrent15m1024QAMLight       PerfCurrentCount,
            xfPMACMCurrent15m2048QAMStrong      PerfCurrentCount,
            xfPMACMCurrent15m2048QAMStd         PerfCurrentCount,
            xfPMACMCurrent15m2048QAMLight       PerfCurrentCount,
            xfPMACMCurrent15m4096QAMStrong      PerfCurrentCount,
            xfPMACMCurrent15m4096QAMStd         PerfCurrentCount,
            xfPMACMCurrent15m4096QAMLight       PerfCurrentCount,
            xfPMACMCurrent15m8192QAMStrong      PerfCurrentCount,
            xfPMACMCurrent15m8192QAMStd         PerfCurrentCount,
            xfPMACMCurrent15m8192QAMLight       PerfCurrentCount,
            xfPMACMCurrent15m16384QAMStrong     PerfCurrentCount,
            xfPMACMCurrent15m16384QAMStd        PerfCurrentCount,
            xfPMACMCurrent15m16384QAMLight      PerfCurrentCount
        }

    xfPMACMCurrent15m4QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 1 }

    xfPMACMCurrent15m4QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 2 }

    xfPMACMCurrent15m4QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 3 }

    xfPMACMCurrent15m16QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 4 }

    xfPMACMCurrent15m16QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 5 }

    xfPMACMCurrent15m16QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 6 }

    xfPMACMCurrent15m32QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 7 }

    xfPMACMCurrent15m32QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 8 }

    xfPMACMCurrent15m32QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 9 }

    xfPMACMCurrent15m64QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 10 }

    xfPMACMCurrent15m64QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 11 }

    xfPMACMCurrent15m64QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 12 }

    xfPMACMCurrent15m128QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 13 }

    xfPMACMCurrent15m128QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 14 }

    xfPMACMCurrent15m128QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 15 }

    xfPMACMCurrent15m256QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 16 }

    xfPMACMCurrent15m256QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 17 }

    xfPMACMCurrent15m256QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 18 }

    xfPMACMCurrent15m512QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 19 }

    xfPMACMCurrent15m512QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 20 }

    xfPMACMCurrent15m512QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 21 }

    xfPMACMCurrent15m1024QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 22 }

    xfPMACMCurrent15m1024QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 23 }

    xfPMACMCurrent15m1024QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 24 }

    xfPMACMCurrent15m2048QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 25 }

    xfPMACMCurrent15m2048QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 26 }

    xfPMACMCurrent15m2048QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 27 }

    xfPMACMCurrent15m4096QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 28 }

    xfPMACMCurrent15m4096QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 29 }

    xfPMACMCurrent15m4096QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 30 }

    xfPMACMCurrent15m8192QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 31 }

    xfPMACMCurrent15m8192QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 32 }

    xfPMACMCurrent15m8192QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 33 }

    xfPMACMCurrent15m16384QAMStrong OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 34 }

    xfPMACMCurrent15m16384QAMStd OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 35 }

    xfPMACMCurrent15m16384QAMLight OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Valid interval time since reset."
        ::= { xfRLPMACMCurrent15mEntry 36 }

------------------------------------------------------------------------------
-- xfRLPMACMInterval15mTable
------------------------------------------------------------------------------
    xfRLPMACMInterval15mTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMACMInterval15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "ACM-based counters for interval 15m table."
        ::= { xfRadioLinkRltPmObjects 6 }

    xfRLPMACMInterval15mEntry OBJECT-TYPE
        SYNTAX XfRLPMACMInterval15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the table."
        INDEX { ifIndex, xfPMACMInterval15mIntervalNumber }
        ::= { xfRLPMACMInterval15mTable 1 }

    XfRLPMACMInterval15mEntry ::=
        SEQUENCE
        {
            xfPMACMInterval15mIntervalNumber    Integer32,
            xfPMACMInterval15m4QAMStrong        PerfIntervalCount,
            xfPMACMInterval15m4QAMStd           PerfIntervalCount,
            xfPMACMInterval15m4QAMLight         PerfIntervalCount,
            xfPMACMInterval15m16QAMStrong       PerfIntervalCount,
            xfPMACMInterval15m16QAMStd          PerfIntervalCount,
            xfPMACMInterval15m16QAMLight        PerfIntervalCount,
            xfPMACMInterval15m32QAMStrong       PerfIntervalCount,
            xfPMACMInterval15m32QAMStd          PerfIntervalCount,
            xfPMACMInterval15m32QAMLight        PerfIntervalCount,
            xfPMACMInterval15m64QAMStrong       PerfIntervalCount,
            xfPMACMInterval15m64QAMStd          PerfIntervalCount,
            xfPMACMInterval15m64QAMLight        PerfIntervalCount,
            xfPMACMInterval15m128QAMStrong      PerfIntervalCount,
            xfPMACMInterval15m128QAMStd         PerfIntervalCount,
            xfPMACMInterval15m128QAMLight       PerfIntervalCount,
            xfPMACMInterval15m256QAMStrong      PerfIntervalCount,
            xfPMACMInterval15m256QAMStd         PerfIntervalCount,
            xfPMACMInterval15m256QAMLight       PerfIntervalCount,
            xfPMACMInterval15m512QAMStrong      PerfIntervalCount,
            xfPMACMInterval15m512QAMStd         PerfIntervalCount,
            xfPMACMInterval15m512QAMLight       PerfIntervalCount,
            xfPMACMInterval15m1024QAMStrong     PerfIntervalCount,
            xfPMACMInterval15m1024QAMStd        PerfIntervalCount,
            xfPMACMInterval15m1024QAMLight      PerfIntervalCount,
            xfPMACMInterval15m2048QAMStrong     PerfIntervalCount,
            xfPMACMInterval15m2048QAMStd        PerfIntervalCount,
            xfPMACMInterval15m2048QAMLight      PerfIntervalCount,
            xfPMACMInterval15m4096QAMStrong     PerfIntervalCount,
            xfPMACMInterval15m4096QAMStd        PerfIntervalCount,
            xfPMACMInterval15m4096QAMLight      PerfIntervalCount,
            xfPMACMInterval15mValidData         TruthValue,
            xfPMACMInterval15m8192QAMStrong     PerfIntervalCount,
            xfPMACMInterval15m8192QAMStd        PerfIntervalCount,
            xfPMACMInterval15m8192QAMLight      PerfIntervalCount,
            xfPMACMInterval15m16384QAMStrong    PerfIntervalCount,
            xfPMACMInterval15m16384QAMStd       PerfIntervalCount,
            xfPMACMInterval15m16384QAMLight     PerfIntervalCount
        }

    xfPMACMInterval15mIntervalNumber OBJECT-TYPE
        SYNTAX Integer32 (1..96)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "A number between 1 and 96, which identifies the interval for which
            the set of statistics is available. The interval identified by 1
            is the most recently completed 15 minute interval, and the interval
            identified by N is the interval immediately preceding the one
            identified by N-1."
        ::= { xfRLPMACMInterval15mEntry 1 }

    xfPMACMInterval15m4QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 2 }

    xfPMACMInterval15m4QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 3 }

    xfPMACMInterval15m4QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 4 }

    xfPMACMInterval15m16QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 5 }

    xfPMACMInterval15m16QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 6 }

    xfPMACMInterval15m16QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 7 }

    xfPMACMInterval15m32QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 8 }

    xfPMACMInterval15m32QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 9 }

    xfPMACMInterval15m32QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 10 }

    xfPMACMInterval15m64QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 11 }

    xfPMACMInterval15m64QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 12 }

    xfPMACMInterval15m64QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 13 }

    xfPMACMInterval15m128QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 14 }

    xfPMACMInterval15m128QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 15 }

    xfPMACMInterval15m128QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 16 }

    xfPMACMInterval15m256QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 17 }

    xfPMACMInterval15m256QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 18 }

    xfPMACMInterval15m256QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 19 }

    xfPMACMInterval15m512QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 20 }

    xfPMACMInterval15m512QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 21 }

    xfPMACMInterval15m512QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 22 }

    xfPMACMInterval15m1024QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 23 }

    xfPMACMInterval15m1024QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 24 }

    xfPMACMInterval15m1024QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 25 }

    xfPMACMInterval15m2048QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 26 }

    xfPMACMInterval15m2048QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 27 }

    xfPMACMInterval15m2048QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 28 }

    xfPMACMInterval15m4096QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 29 }

    xfPMACMInterval15m4096QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 30 }

    xfPMACMInterval15m4096QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 31 }

    xfPMACMInterval15mValidData OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This variable indicates whether the data for this interval is valid."
        ::= { xfRLPMACMInterval15mEntry 32 }

    xfPMACMInterval15m8192QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 33 }

    xfPMACMInterval15m8192QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 34 }

    xfPMACMInterval15m8192QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 35 }

    xfPMACMInterval15m16384QAMStrong OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 36 }

    xfPMACMInterval15m16384QAMStd OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 37 }

    xfPMACMInterval15m16384QAMLight OBJECT-TYPE
        SYNTAX PerfIntervalCount
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Interval count."
        ::= { xfRLPMACMInterval15mEntry 38 }

------------------------------------------------------------------------------
-- xfRLPMMimoCurrentTable
------------------------------------------------------------------------------
    xfRLPMMimoCurrentTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMMimoCurrentEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table for RLT MIMO Current performance data."
        ::= { xfRadioLinkRltPmObjects 7 }

    xfRLPMMimoCurrentEntry OBJECT-TYPE
        SYNTAX XfRLPMMimoCurrentEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the xfRLPMMimoCurrentTable."
        INDEX { ifIndex }
        ::= { xfRLPMMimoCurrentTable 1 }

    XfRLPMMimoCurrentEntry ::=
        SEQUENCE
        {
            xfPMPerfCurrentEta                INTEGER,
            xfPMPerfEtaMinLast7days           INTEGER,
            xfPMPerfEtaMaxLast7days           INTEGER
        }

    xfPMPerfCurrentEta OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " Performance Monitoring for Current MIMO Eta Value."
        ::= { xfRLPMMimoCurrentEntry 1 }

    xfPMPerfEtaMinLast7days OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate ETA Min level for the last 7 days."
        ::= { xfRLPMMimoCurrentEntry 2 }

    xfPMPerfEtaMaxLast7days OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate ETA Max level for the last 7 days."
        ::= { xfRLPMMimoCurrentEntry 3 }


------------------------------------------------------------------------------
-- xfRLPMMimoCurrent24hTable
------------------------------------------------------------------------------
    xfRLPMMimoCurrent24hTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMMimoCurrent24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Counters for Eta in current 24h."
        ::= { xfRadioLinkRltPmObjects 8 }

    xfRLPMMimoCurrent24hEntry OBJECT-TYPE
        SYNTAX XfRLPMMimoCurrent24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the xfRLPMMimoCurrent24hTable."
        INDEX { ifIndex }
        ::= { xfRLPMMimoCurrent24hTable 1 }

    XfRLPMMimoCurrent24hEntry ::=
        SEQUENCE
        {
            xfPMPerfCurrent24hElapsedTime      Counter32,
            xfPMPerfCurrent24hEtaMin           INTEGER,
            xfPMPerfCurrent24hEtaMax           INTEGER
        }

    xfPMPerfCurrent24hElapsedTime OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The number of seconds that have elapsed since the
             beginning of the current error-measurement period. "
        ::= { xfRLPMMimoCurrent24hEntry 1 }


    xfPMPerfCurrent24hEtaMin OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Min Value in Current 24h."
        ::= { xfRLPMMimoCurrent24hEntry 2 }

    xfPMPerfCurrent24hEtaMax OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for Current MIMO 24h Eta Max Value."
        ::= { xfRLPMMimoCurrent24hEntry 3 }

------------------------------------------------------------------------------
-- xfRLPMMimoInterval24hTable
------------------------------------------------------------------------------
    xfRLPMMimoInterval24hTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMMimoInterval24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Min Value in Interval of 24h."
        ::= { xfRadioLinkRltPmObjects 9 }

    xfRLPMMimoInterval24hEntry OBJECT-TYPE
        SYNTAX XfRLPMMimoInterval24hEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the xfRLPMMimoInterval24hTable."
        INDEX { ifIndex }
        ::= { xfRLPMMimoInterval24hTable 1 }

    XfRLPMMimoInterval24hEntry ::=
        SEQUENCE
        {
            xfPMPerfInterval24hValidData        INTEGER,
            xfPMPerfInterval24hEtaMin           INTEGER,
            xfPMPerfInterval24hEtaMax           INTEGER
        }

    xfPMPerfInterval24hValidData OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This variable indicates whether the data for this interval is valid."
        ::= { xfRLPMMimoInterval24hEntry 1 }


    xfPMPerfInterval24hEtaMin OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Min Value in Interval of 24h."
        ::= { xfRLPMMimoInterval24hEntry 2 }

    xfPMPerfInterval24hEtaMax OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Max Value in Interval of 24h."
        ::= { xfRLPMMimoInterval24hEntry 3 }

------------------------------------------------------------------------------
-- xfRLPMMimoCurrent15mTable
------------------------------------------------------------------------------
    xfRLPMMimoCurrent15mTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMMimoCurrent15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Counters for Eta MIMO Current 15m table."
        ::= { xfRadioLinkRltPmObjects 10 }

    xfRLPMMimoCurrent15mEntry OBJECT-TYPE
        SYNTAX XfRLPMMimoCurrent15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the table."
        INDEX { ifIndex }
        ::= { xfRLPMMimoCurrent15mTable 1 }

     XfRLPMMimoCurrent15mEntry ::=
        SEQUENCE
        {
            xfPMPerfCurrent15mElapsedTime      Counter32,
            xfPMPerfCurrent15mEtaMin           INTEGER,
            xfPMPerfCurrent15mEtaMax           INTEGER
        }

     xfPMPerfCurrent15mElapsedTime OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The number of seconds that have elapsed since the
             beginning of the current error-measurement period"
        ::= { xfRLPMMimoCurrent15mEntry 1 }

    xfPMPerfCurrent15mEtaMin OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Min Value in Current 15m."
        ::= { xfRLPMMimoCurrent15mEntry 2 }

    xfPMPerfCurrent15mEtaMax OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Max Value in Current 15m."
        ::= { xfRLPMMimoCurrent15mEntry 3 }

------------------------------------------------------------------------------
-- xfRLPMMimoInterval15mTable
------------------------------------------------------------------------------
    xfRLPMMimoInterval15mTable OBJECT-TYPE
        SYNTAX SEQUENCE OF XfRLPMMimoInterval15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Counters for Eta MIMO for Interval 15m."
        ::= { xfRadioLinkRltPmObjects 11 }

    xfRLPMMimoInterval15mEntry OBJECT-TYPE
        SYNTAX XfRLPMMimoInterval15mEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the table."
        INDEX { ifIndex, xfPMPerfInterval15mIntervalNumber }
        ::= { xfRLPMMimoInterval15mTable 1 }

     XfRLPMMimoInterval15mEntry ::=
        SEQUENCE
        {
            xfPMPerfInterval15mIntervalNumber   INTEGER,
            xfPMPerfInterval15mEtaMin           INTEGER,
            xfPMPerfInterval15mEtaMax           INTEGER,
            xfPMPerfInterval15mValidData        INTEGER
        }

     xfPMPerfInterval15mIntervalNumber OBJECT-TYPE
        SYNTAX INTEGER(1..96)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "A number between 1 and 96, which identifies the interval for which
             the set of statistics is available. The interval identified by 1
             is the most recently completed 15 minute interval, and the interval
             identified by N is the interval immediately preceding the one
             identified by N-1."
        ::= { xfRLPMMimoInterval15mEntry 1 }

    xfPMPerfInterval15mEtaMin OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Min Value in Interval 15m."
        ::= { xfRLPMMimoInterval15mEntry 2 }

    xfPMPerfInterval15mEtaMax OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Performance Monitoring for MIMO Eta Max Value in Interval 15m."
        ::= { xfRLPMMimoInterval15mEntry 3 }

     xfPMPerfInterval15mValidData OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This variable indicates whether the data for this interval is valid."
        ::= { xfRLPMMimoInterval15mEntry 4 }
--
------------------------------------------------------------------------------
-- xfRadioLinkRltConformance
------------------------------------------------------------------------------
--

    xfRadioLinkRltCompliances OBJECT IDENTIFIER ::= { xfRadioLinkRltConformance 1 }

    xfRadioLinkRltGroups OBJECT IDENTIFIER ::= { xfRadioLinkRltConformance 2 }

    xfRadioLinkRltFullCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION
            "The compliance statement for SNMP entities which implement everything."
        MODULE -- This Module
        MANDATORY-GROUPS { xfRadioLinkRltCompleteGroup }
        ::= { xfRadioLinkRltCompliances 1 }

    xfRadioLinkRltCompleteGroup OBJECT-GROUP
        OBJECTS
        {
            cgIfIndex,
            cgTypeIndex,
            xfIfStatus,

            liEntLogicalIndex,
            liIfIndex,
            xfLIName,
            xfLIIfDescr,

            xfCarrierTermDistinguishedName,
            xfCarrierTermLabel,
            xfCarrierTermOperStatus,
            xfCarrierTermRadioFrameId,
            xfCarrierTermPreamble,
            xfCarrierTermSelectedMinACM,
            xfCarrierTermActualACM,
            xfCarrierTermSelectedMaxACM,
            xfCarrierTermCapabilitiesLastChange,
            xfCarrierTermReferenceSEC,
            xfCarrierTermWantedLicensedCapacity,
            xfCarrierTermActualLicensedCapacity,
            xfCarrierTermActualCapacity,
            xfCarrierTermPolarization,
            xfCarrierTermXPICOperStatus,
            xfCarrierTermMIMOOperStatus,
            xfCarrierTermSNIR,
            xfCarrierTermXPI,
            xfCarrierTermReset,
            xfCarrierTermRestore,
            xfCarrierTermAutoRemoveLoopEnable,
            xfCarrierTermBerAlarmThreshold,
            xfCarrierTermActualRxACM,
            xfCarrierTermFeCTSeverity,

            xfRadioFrameId,
            xfChannelSpacing,
            xfFrameFormatType,
            xfMinACMCapacity,
            xfMaxACMCapacity,
            xfACMProfile,

            xfACMIndex,
            xfACMCapacity,

            rltEntLogicalIndex,
            xfRLTDistinguishedName,
            xfRLTIpAddress,
            xfRLTIPv6Address,
            xfRLTNeName,
            xfRLTNeType,
            xfRLTId,
            xfRLTExpectedFarEndId,
            xfRLTFarEndIdCheck,
            xfRLTStatus,
            xfRLTMode,
            xfRLTActualTXTotalCapacity,
            xfRLTActualTXPacketCapacity,
            xfRLTLimitedTotalCapacity,
            xfRLTRltSeverity,
            xfRLTCapability,
            xfRLTInventoryLastChange,
            xfRLTCpriMode,
            xfRLTReset,
            xfRLTMeasuredHopLength,

            trEntLogicalIndex,
            xfTDMEnable,

            xfRLTDMIfIndex,
            xfActualTDMCapacity,
            xfWantedTDMAllocation,
            xfActualTDMAllocation,
            xfTDMIfAlarms,
            xfTDMRxLoop,
            xfTDMDistinguishedName,
            xfTDMMaxTributaries,
            xfTDMHopLength,

            xfCGIfIndex,
            xfCGIfMinSpeed,
            xfCGIfMaxSpeed,
            xfCGIfRCNum,
            xfCGIfAlarms,
            xfCGIfHopViewStatus,

            xpicPairEntLogicalIIndex,
            xfXPICPairAdminStatus,
            xfXPICPairNumber,
            xfXPICPairRecovery,
            xfXPICPairRestore,
            xfXPICCTmember1,
            xfXPICCTmember2,
            xfXPICAutoRestore,
            xfXpicPairIndex,

            mimoGroupEntLogicalIIndex,
            xfMIMOGroupAdminStatus,
            xfMIMOGroupNumber,
            xfMIMOGroupRecovery,
            xfMIMOGroupRestore,
            xfMIMOCTmember1,
            xfMIMOCTmember2,
            xfMIMOCTmember3,
            xfMIMOCTmember4,

            xfPMTimeElapsed,
            xfPMCurrentES,
            xfPMCurrentSES,
            xfPMCurrentBBE,
            xfPMCurrentUAS,
            xfPMCurrentBB,
            xfPMPerfReset,
            xfPMCurrentESR,
            xfPMCurrentSESR,
            xfPMCurrentBBER,

            xfPMACMSetThreshold15m,
            xfPMACMSetThreshold24h,
            xfPMACMResetThreshold15m,
            xfPMACMStatus,
            xfPMACMValidData,

            xfPMACMCurrent24h4QAMStrong,
            xfPMACMCurrent24h4QAMStd,
            xfPMACMCurrent24h4QAMLight,
            xfPMACMCurrent24h16QAMStrong,
            xfPMACMCurrent24h16QAMStd,
            xfPMACMCurrent24h16QAMLight,
            xfPMACMCurrent24h32QAMStrong,
            xfPMACMCurrent24h32QAMStd,
            xfPMACMCurrent24h32QAMLight,
            xfPMACMCurrent24h64QAMStrong,
            xfPMACMCurrent24h64QAMStd,
            xfPMACMCurrent24h64QAMLight,
            xfPMACMCurrent24h128QAMStrong,
            xfPMACMCurrent24h128QAMStd,
            xfPMACMCurrent24h128QAMLight,
            xfPMACMCurrent24h256QAMStrong,
            xfPMACMCurrent24h256QAMStd,
            xfPMACMCurrent24h256QAMLight,
            xfPMACMCurrent24h512QAMStrong,
            xfPMACMCurrent24h512QAMStd,
            xfPMACMCurrent24h512QAMLight,
            xfPMACMCurrent24h1024QAMStrong,
            xfPMACMCurrent24h1024QAMStd,
            xfPMACMCurrent24h1024QAMLight,
            xfPMACMCurrent24h2048QAMStrong,
            xfPMACMCurrent24h2048QAMStd,
            xfPMACMCurrent24h2048QAMLight,
            xfPMACMCurrent24h4096QAMStrong,
            xfPMACMCurrent24h4096QAMStd,
            xfPMACMCurrent24h4096QAMLight,
            xfPMACMCurrent24h8192QAMStrong,
            xfPMACMCurrent24h8192QAMStd,
            xfPMACMCurrent24h8192QAMLight,
            xfPMACMCurrent24h16384QAMStrong,
            xfPMACMCurrent24h16384QAMStd,
            xfPMACMCurrent24h16384QAMLight,


            xfPMACMInterval24h4QAMStrong,
            xfPMACMInterval24h4QAMStd,
            xfPMACMInterval24h4QAMLight,
            xfPMACMInterval24h16QAMStrong,
            xfPMACMInterval24h16QAMStd,
            xfPMACMInterval24h16QAMLight,
            xfPMACMInterval24h32QAMStrong,
            xfPMACMInterval24h32QAMStd,
            xfPMACMInterval24h32QAMLight,
            xfPMACMInterval24h64QAMStrong,
            xfPMACMInterval24h64QAMStd,
            xfPMACMInterval24h64QAMLight,
            xfPMACMInterval24h128QAMStrong,
            xfPMACMInterval24h128QAMStd,
            xfPMACMInterval24h128QAMLight,
            xfPMACMInterval24h256QAMStrong,
            xfPMACMInterval24h256QAMStd,
            xfPMACMInterval24h256QAMLight,
            xfPMACMInterval24h512QAMStrong,
            xfPMACMInterval24h512QAMStd,
            xfPMACMInterval24h512QAMLight,
            xfPMACMInterval24h1024QAMStrong,
            xfPMACMInterval24h1024QAMStd,
            xfPMACMInterval24h1024QAMLight,
            xfPMACMInterval24h2048QAMStrong,
            xfPMACMInterval24h2048QAMStd,
            xfPMACMInterval24h2048QAMLight,
            xfPMACMInterval24h4096QAMStrong,
            xfPMACMInterval24h4096QAMStd,
            xfPMACMInterval24h4096QAMLight,
            xfPMACMInterval24hValidData,
            xfPMACMInterval24h8192QAMStrong,
            xfPMACMInterval24h8192QAMStd,
            xfPMACMInterval24h8192QAMLight,
            xfPMACMInterval24h16384QAMStrong,
            xfPMACMInterval24h16384QAMStd,
            xfPMACMInterval24h16384QAMLight,

            xfPMACMCurrent15m4QAMStrong,
            xfPMACMCurrent15m4QAMStd,
            xfPMACMCurrent15m4QAMLight,
            xfPMACMCurrent15m16QAMStrong,
            xfPMACMCurrent15m16QAMStd,
            xfPMACMCurrent15m16QAMLight,
            xfPMACMCurrent15m32QAMStrong,
            xfPMACMCurrent15m32QAMStd,
            xfPMACMCurrent15m32QAMLight,
            xfPMACMCurrent15m64QAMStrong,
            xfPMACMCurrent15m64QAMStd,
            xfPMACMCurrent15m64QAMLight,
            xfPMACMCurrent15m128QAMStrong,
            xfPMACMCurrent15m128QAMStd,
            xfPMACMCurrent15m128QAMLight,
            xfPMACMCurrent15m256QAMStrong,
            xfPMACMCurrent15m256QAMStd,
            xfPMACMCurrent15m256QAMLight,
            xfPMACMCurrent15m512QAMStrong,
            xfPMACMCurrent15m512QAMStd,
            xfPMACMCurrent15m512QAMLight,
            xfPMACMCurrent15m1024QAMStrong,
            xfPMACMCurrent15m1024QAMStd,
            xfPMACMCurrent15m1024QAMLight,
            xfPMACMCurrent15m2048QAMStrong,
            xfPMACMCurrent15m2048QAMStd,
            xfPMACMCurrent15m2048QAMLight,
            xfPMACMCurrent15m4096QAMStrong,
            xfPMACMCurrent15m4096QAMStd,
            xfPMACMCurrent15m4096QAMLight,
            xfPMACMCurrent15m8192QAMStrong,
            xfPMACMCurrent15m8192QAMStd,
            xfPMACMCurrent15m8192QAMLight,
            xfPMACMCurrent15m16384QAMStrong,
            xfPMACMCurrent15m16384QAMStd,
            xfPMACMCurrent15m16384QAMLight,


            xfPMACMInterval15mIntervalNumber,
            xfPMACMInterval15m4QAMStrong,
            xfPMACMInterval15m4QAMStd,
            xfPMACMInterval15m4QAMLight,
            xfPMACMInterval15m16QAMStrong,
            xfPMACMInterval15m16QAMStd,
            xfPMACMInterval15m16QAMLight,
            xfPMACMInterval15m32QAMStrong,
            xfPMACMInterval15m32QAMStd,
            xfPMACMInterval15m32QAMLight,
            xfPMACMInterval15m64QAMStrong,
            xfPMACMInterval15m64QAMStd,
            xfPMACMInterval15m64QAMLight,
            xfPMACMInterval15m128QAMStrong,
            xfPMACMInterval15m128QAMStd,
            xfPMACMInterval15m128QAMLight,
            xfPMACMInterval15m256QAMStrong,
            xfPMACMInterval15m256QAMStd,
            xfPMACMInterval15m256QAMLight,
            xfPMACMInterval15m512QAMStrong,
            xfPMACMInterval15m512QAMStd,
            xfPMACMInterval15m512QAMLight,
            xfPMACMInterval15m1024QAMStrong,
            xfPMACMInterval15m1024QAMStd,
            xfPMACMInterval15m1024QAMLight,
            xfPMACMInterval15m2048QAMStrong,
            xfPMACMInterval15m2048QAMStd,
            xfPMACMInterval15m2048QAMLight,
            xfPMACMInterval15m4096QAMStrong,
            xfPMACMInterval15m4096QAMStd,
            xfPMACMInterval15m4096QAMLight,
            xfPMACMInterval15mValidData,
            xfPMACMInterval15m8192QAMStrong,
            xfPMACMInterval15m8192QAMStd,
            xfPMACMInterval15m8192QAMLight,
            xfPMACMInterval15m16384QAMStrong,
            xfPMACMInterval15m16384QAMStd,
            xfPMACMInterval15m16384QAMLight,


            xfRLWANIfIndex,
            xfRLWANDistinguishedName,
            xfRLWANCompAdminStatus,
            xfRLWANCompConnStatus,
            xfRLWANMlhcMplsMode,
            xfRLWANMlhcOperStatus,
            xfRLWANPlcOperStatus,
            xfRLWANActualCapacity,
            xfRLWANLimitedCapacity,

            xfRLTMHIndex,
            xfRLTModuleIndex,
            xfRLTEntPhysicalIndex,
            xfRLTPhysicalCointainedIn,
            xfRLTPhysicalParentRelPos,
            xfRLTEntityPhysicalDescr,
            xfRLTModuleSlotPosition,
            xfRLTNEDistinguishedName,
            xfRLTFEDistinguishedName,
            xfRLTInterfaceIndex,
            xfRLTHighestSeverityAlarm,

            xfRLTProtIndex,
            xfRLTProtectionSwitchMode,
            xfRLTProtectionStatus,
            xfRLTRevertivePreferredTX,
            xfRLTProtectionWaitToRestoreTime,
            xfRLTFadeNotificationTimer,
            xfRLTManualSwitchCommand,
            xfRLTTxSwitchOverConfiguration,
            xfRLTTxSwitchOverAlarmReset,
            xfRLTNumOfRLPSwitch,
            xfRLTEnhancedACMProtectionMode,
            xfRLTEnhancedACMProtectionOperStatus,

            xfRLTEncryptionIndex,
            xfRLTEncryptionAdminStatus,
            xfRLTEncryptionOperStatus,
            xfRLTEncryptionMasterKey,

            xfPMPerfCurrentEta,
            xfPMPerfEtaMinLast7days,
            xfPMPerfEtaMaxLast7days,

            xfPMPerfCurrent24hElapsedTime,
            xfPMPerfCurrent24hEtaMin,
            xfPMPerfCurrent24hEtaMax,

            xfPMPerfInterval24hValidData,
            xfPMPerfInterval24hEtaMin,
            xfPMPerfInterval24hEtaMax,

            xfPMPerfCurrent15mElapsedTime,
            xfPMPerfCurrent15mEtaMin,
            xfPMPerfCurrent15mEtaMax,

            xfPMPerfInterval15mIntervalNumber,
            xfPMPerfInterval15mEtaMin,
            xfPMPerfInterval15mEtaMax,
            xfPMPerfInterval15mValidData
       }
        STATUS current
        DESCRIPTION
            "A collection of all current objects in this MIB module"
        ::= { xfRadioLinkRltGroups 1 }

    END