path: root/MIBS/hp/HP-ICF-BASIC

HP-ICF-BASIC DEFINITIONS ::= BEGIN

    IMPORTS
        Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY,
        NOTIFICATION-TYPE
            FROM SNMPv2-SMI
        MacAddress, TruthValue, RowStatus, DisplayString,
        TDomain, TAddress, StorageType, TimeStamp
            FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
            FROM SNMPv2-CONF
        ifIndex
            FROM IF-MIB
        entLogicalIndex
            FROM ENTITY-MIB
        alarmEntry, eventEntry
            FROM RMON-MIB
        InetAddress, InetAddressType, InetAddressPrefixLength,
        InetPortNumber
            FROM INET-ADDRESS-MIB
        hpicfObjectModules, hpicfCommon, hpicfCommonTrapsPrefix
            FROM HP-ICF-OID
        snmpTargetAddrEntry
            FROM SNMP-TARGET-MIB;

    hpicfBasicMib MODULE-IDENTITY
        LAST-UPDATED "200706070000Z"  -- June 7, 2007
        ORGANIZATION "Hewlett Packard Company,
                     Network Infrastructure Solutions"
        CONTACT-INFO "Hewlett Packard Company
                     8000 Foothills Blvd.
                     Roseville, CA 95747"
        DESCRIPTION  "This MIB module describes objects for basic
                     management of devices in the HP Integrated
                     Communication Facility product line."

        REVISION     "200709130000Z"  -- Sept 13, 2007
        DESCRIPTION  "Limit the size to 1300 for the hpicfBannerMOTD."

        REVISION     "200706070000Z"  -- June 7, 2007
        DESCRIPTION  "Added hpicfIpConfigLocalProxyArp object to the
                      the hpicfIpConfigEntry sequence."

        REVISION     "200705300954Z"  -- May 30, 2007
        DESCRIPTION  "Added the hpicfTelnet6Enable object."
	
        REVISION     "200511170000Z"  -- November 17, 2005
        DESCRIPTION  "Added hpicfBasicDNSConfig object group to 
                      the HP ICF Basic Group.  Updated conformance and 
                      compliences objects."

        REVISION     "200301090108Z"  -- January 9, 2003
        DESCRIPTION  "Changed the default value for 
                      hpicfSnmpTargetAddrLogFilter to 1."

        REVISION     "200210100401Z"  -- October 10, 2002
        DESCRIPTION  "Added hpicfSnmpTargetAddrLogFilter for to add
                      log filtering in snmpTargetAddrTable.  Added
                      conformance group hpicfSnmpTargetAddrLogFilterGroup.
                      Deprecated hpicfTrapDestTable.  Deprecated 
                      hpicfBasicCompliance3 and replaced it
                      with hpicfBasicCompliance4."

        REVISION     "200011140401Z"  -- November 14, 2000
        DESCRIPTION  "Added proxy ARP and secondary IP address
                     configuration objects."

        REVISION     "200011030511Z"  -- November 3, 2000
        DESCRIPTION  "Deprecated per-entity announce object and
                     hpicfIfToEntity table and replaced with
                     hpicfAnnounceDiscoveryTable, indexed by
                     ifIndex.  Replaced per-interface default
                     gateway with global default gateway."

        REVISION     "9710210300Z"  -- October 21, 1997
        DESCRIPTION  "Added the hpicfWebAgentEnable object."

        REVISION     "9703060331Z"  -- March 6, 1997
        DESCRIPTION  "Fixed some typos in compliances.  Added
                     NOTIFICATION-GROUP information."

        REVISION     "9609100221Z"  -- September 10, 1996
        DESCRIPTION  "Split this MIB module from the former monolithic
                     hp-icf MIB.  Added the announce table.  Added
                     per-interface IP and IPX config.  Added trap
                     destination table and fixed trap table."

        REVISION     "9507130000Z"  -- July 13, 1995
        DESCRIPTION  "Added the hpicfTelnetEnable object."

        REVISION     "9501180000Z"  -- January 18, 1995
        DESCRIPTION  "Initial version of this MIB module.  Consisted of
                     the hpicfReset and hpicfSelfTest objects."

        REVISION     "9501180000Z"  -- April 12, 2004
        DESCRIPTION  "Added the hpicfIpZeroBroadcastEnable object." 
	
        ::= { hpicfObjectModules 5 }


    -- The HP ICF Basic Group


    hpicfBasic OBJECT IDENTIFIER ::= { hpicfCommon 4 }

    hpicfReset OBJECT-TYPE
        SYNTAX      INTEGER {
                        noReset(1),
                        normalReset(2),
                        -- (3) is no longer used
                        agentReset(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When this object is set to to 'normalReset' it 
                    results in a 'powerup' reset of the device.  When
                    set to 'agentReset', it results in a reset of the
                    agent software, without resetting the device
                    hardware.  When this object is set, the agent
                    replies, dallies a short time to allow the reply
                    to be emitted from the device, then performs the
                    reset.  When read, this object always returns 
                    'noReset'."
        ::= { hpicfBasic 1 }

    hpicfSelfTest OBJECT-TYPE
        SYNTAX      INTEGER {
                        stSuccess(1),
                        stExecute(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Self test is invoked by setting this flag to 
                    'stExecute'. When the object changes to 'stSuccess',
                    the test has completed successfully."
        ::= { hpicfBasic 2 }

    hpicfTelnetEnable OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', the
                    telnet server on this agent is running and allowed to
                    accept connections.  When the value of this object is
                    'disabled(2)', no incoming telnet connections will be
                    accepted by this agent.  Whether the telnet server
                    continues running when this object is set to
                    'disabled(2)' is implementation dependent."
        ::= { hpicfBasic 3 }

    hpicfConfigClear OBJECT-TYPE
        SYNTAX      INTEGER {
                        running(1),
                        configClear(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When this object is set to 'configClear', the agent
                    replies, dallies a short time to allow the reply to
                    be emitted from the device, clears all of its
                    nonvolitile parameters back to their factory
                    defaults then resets the device.  Note that this
                    will result in all parameters being cleared,
                    including network configuration.  This function
                    should be used with extreme caution.

                    When read, this object always returns 'running'."
        ::= { hpicfBasic 4 }

    hpicfSelfTestResult OBJECT IDENTIFIER ::= { hpicfBasic 5 }

    hpicfSelfTestResultCode OBJECT-TYPE
        SYNTAX      INTEGER {
                        ok(1),
                        softFailure(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "If the value of this object is 'softFailure', the
                    agent is up and running, but has detected a
                    non-critical failure.  The value of the
                    hpicfSelfTestResultText will contain further
                    information about the type of failure that was
                    detected and may contain information about how to
                    remedy the situation."
        ::= { hpicfSelfTestResult 1 }

    hpicfSelfTestResultText OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "If the value of the hpicfSelfTestResultCode object
                    is 'softFailure', this text string contains detailed
                    information about the most recently detected failure,
                    including information about the type of failure that
                    was detected, and possibly information about how to
                    remedy the situation.  If the value of the
                    hpicfSelfTestResultCode object is 'ok', this object
                    will contain a zero-length octet string."
        ::= { hpicfSelfTestResult 2 }

    hpicfSelfTestResultTime OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object contains the value of sysUpTime at the
                    time the agent detected the failure currently being
                    reported by hpicfSelfTestResultCode and
                    hpicfSelfTestResultText.  If the value of the
                    hpicfSelfTestResultCode is 'ok', or if the current
                    failure was detected before the SNMP agent
                    initialized, this object will have the value 0."
        ::= { hpicfSelfTestResult 3 }

    hpicfWebAgentEnable OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', the
                    ehttpd server on this agent is running and allowed to
                    accept connections.  When the value of this object is
                    'disabled(2)', no incoming ehttpd connections will be
                    accepted by this agent.  Whether the ehttpd server
                    continues running when this object is set to
                    'disabled(2)' is implementation dependent."
        ::= { hpicfBasic 6 }

    hpicfBasicDiscovery OBJECT IDENTIFIER ::= { hpicfBasic 7 }

    hpicfAnnounceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfAnnounceEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A table of per-device network announcement
                    addresses.  This table is used to cause the
                    transmission of announcement packets for a
                    particular logical device to a specified address.
                    This is used as part of topology mapping to
                    determine the network connectivity of a device on
                    the network."
        ::= { hpicfBasicDiscovery 1 }

    hpicfAnnounceEntry OBJECT-TYPE
        SYNTAX      HpicfAnnounceEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A row in the table, containing the announcement
                    address for a single entity."
        INDEX       { entLogicalIndex }
        ::= { hpicfAnnounceTable 1 }

    HpicfAnnounceEntry ::=
        SEQUENCE {
            hpicfAnnounceAddress            MacAddress
        }

    hpicfAnnounceAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Seting an instance of this object to any MAC
                    address will trigger the agent to transmit three
                    announcement packets on an interface associated
                    with the logical entity.  These packets will use a
                    MAC source address set to the agent's MAC address
                    on that interface, a MAC destination address equal
                    to the value of the instance of this object,
                    a destination LSAP of 0xF8, and a destination HP
                    XSAP of 0x165d."
        ::= { hpicfAnnounceEntry 1 }

    hpicfIfToEntityTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIfToEntityEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This table is used to map an interface index to a
                    logical entity index.  This table is mainly used
                    by autodiscovery to figure out which entLogicalIndex
                    corresponds to a particular network address.  This
                    table is not intended as a general purpose mapping.
                    In particular, in some systems the same interface
                    can be in use by multiple logical entities.  Also,
                    there is no requirement that ifIndex is unique
                    across all logical entities (such as the case where
                    multiple agents in the same chassis each assign
                    ifIndex without knowledge of how the other agents
                    are assigning ifIndex).  Therefore, these mappings
                    are only defined to hold for the special purpose
                    of getting from the discovered transport address for
                    a logical device to the entLogicalIndex needed for
                    announce address and search address.  Also, note
                    that this table will not contain entries for all
                    of the values of ifIndex.  It will only contain
                    entries for interfaces that can be used for sending
                    announcement packets for some logical entity."
        ::= { hpicfBasicDiscovery 2 }

    hpicfIfToEntityEntry OBJECT-TYPE
        SYNTAX      HpicfIfToEntityEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A row in the table, containing the ifIndex to
                    entLogicalIndex mapping for a single interface."
        INDEX       { ifIndex }
        ::= { hpicfIfToEntityTable 1 }

    HpicfIfToEntityEntry ::=
        SEQUENCE {
            hpicfIfEntLogicalIndex          Integer32
        }

    hpicfIfEntLogicalIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This object identifies the entLogicalIndex of a
                    device that can be mapped using this interface.  An
                    entLogicalEntry identified by a value of an instance
                    of this object is the same entry identified by the
                    same value of an instance of entLogicalIndex."
        ::= { hpicfIfToEntityEntry 1 }


    hpicfAnnounceDiscoveryTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfAnnounceDiscoveryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table of per-device network announcement
                    addresses.  This table is used to cause the
                    transmission of announcement packets for a
                    particular logical device to a specified address.
                    This is used as part of topology mapping to
                    determine the network connectivity of a device on
                    the network."
        ::= { hpicfBasicDiscovery 3 }

    hpicfAnnounceDiscoveryEntry OBJECT-TYPE
        SYNTAX      HpicfAnnounceDiscoveryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A row in the table, containing the announcement
                    address for a single entity."
        INDEX       { ifIndex }
        ::= { hpicfAnnounceDiscoveryTable 1 }

    HpicfAnnounceDiscoveryEntry ::=
        SEQUENCE {
            hpicfAnnounceDiscoveryAddress      MacAddress
        }

    hpicfAnnounceDiscoveryAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Seting an instance of this object to any MAC
                    address will trigger the agent to transmit three
                    announcement packets on an interface associated
                    with the logical entity.  These packets will use a
                    MAC source address set to the agent's MAC address
                    on that interface, a MAC destination address equal
                    to the value of the instance of this object,
                    a destination LSAP of 0xF8, and a destination HP
                    XSAP of 0x165d."
        ::= { hpicfAnnounceDiscoveryEntry 1 }


    hpicfBasicIpConfig OBJECT IDENTIFIER ::= { hpicfBasic 8 }

    hpicfIpConfigTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This table contains per-interface IP configuration
                    information."
        ::= { hpicfBasicIpConfig 1 }

    hpicfIpConfigEntry OBJECT-TYPE
        SYNTAX      HpicfIpConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    An entry in the hpicfIpConfigTable containing the IP
                    configuration information for a single interface."
        INDEX       { ifIndex }
        ::= { hpicfIpConfigTable 1 }

    HpicfIpConfigEntry ::=
        SEQUENCE {
            hpicfIpConfigAddress            IpAddress,
            hpicfIpConfigAddrMask           IpAddress,
            hpicfIpConfigDefaultRouter      IpAddress,
            hpicfIpConfigPingRouter         TruthValue,
            hpicfIpConfigMtu                Integer32,
            hpicfIpConfigAdminStatus        INTEGER,
            hpicfIpConfigProxyArp           INTEGER,
            hpicfIpConfigLocalProxyArp      INTEGER
        }

    hpicfIpConfigAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This variable contains the IP address for this
                    interface."
        ::= { hpicfIpConfigEntry 1 }

    hpicfIpConfigAddrMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This variable contains the IP subnet mask for
                    this interface."
        ::= { hpicfIpConfigEntry 2 }

    hpicfIpConfigDefaultRouter OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This variable contains the IP address of the
                    default router for this interface.  For SLIP
                    interfaces, this object contains the IP address
                    of the node at the other end of the serial
                    connection."
        ::= { hpicfIpConfigEntry 3 }

    hpicfIpConfigPingRouter OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This object is used to configure whether this agent
                    will periodically send ICMP echo request packets to
                    the IP default router for this interface.  Since a
                    networking device typically does not transmit unless
                    it receives a management request, and since some
                    autodiscovery applications work by scanning ARP
                    caches, this ICMP echo can be used to try to stay in
                    our default router's ARP cache so that we can be
                    discovered.  This object allows the network manager
                    to enable or disable sending these ICMP echo
                    requests."
        ::= { hpicfIpConfigEntry 4 }

    hpicfIpConfigMtu OBJECT-TYPE
        SYNTAX      Integer32 (68..65535)
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This object is used to configure the largest
                    datagram that IP will send on this interface.  Note
                    that for some interface types, this value may not
                    be changeable, and this object will be implemented
                    as read-only on those interfaces.  Also note that
                    most interfaces will not allow the full range of
                    values defined above, since the upper limit on the
                    MTU is constrained by the interface type."
        ::= { hpicfIpConfigEntry 5 }

    hpicfIpConfigAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        disable(1),
                        useConfigured(2),
                        learn(3)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Setting this flag to 'learn' (the default) will
                    clear any existing IP address configuration for
                    this interface, and will cause the device to use a
                    dynamic method (e.g. BootP) to obtain its IP
                    configuration for this interface.  This flag must be
                    set to 'useConfigured' in order to configure an IP
                    address for the interface.  Setting this flag to
                    'disable' will disable the IP protocol stack on this
                    interface."
        ::= { hpicfIpConfigEntry 6 }

    hpicfIpConfigProxyArp OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Enables/disables ARP proxy on the interface. If set 
                    to enabled(1), the switch will respond on ARP request
                    for IP addresses from other subnets."
        ::= { hpicfIpConfigEntry 7 }

    hpicfIpConfigLocalProxyArp OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Enables/disables local ARP proxy on the interface. If set 
                    to enabled(1), the switch will respond on ARP request
                    for IP addresses from local subnets."
        ::= { hpicfIpConfigEntry 8 }


    -- IP secondary addresses

    hpicfIpAddrTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A table that contains the secondary addresses
                    configured for an interface."
        ::= { hpicfBasicIpConfig 2 }

    hpicfIpAddrEntry OBJECT-TYPE
        SYNTAX      HpicfIpAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Information about a secondary IP address assigned
                    to an interface."
        INDEX       { ifIndex,
                      hpicfIpAddrAddr }
        ::= { hpicfIpAddrTable 1 }

    HpicfIpAddrEntry ::=
        SEQUENCE {
            hpicfIpAddrAddr               IpAddress,
            hpicfIpAddrMask               IpAddress,
            hpicfIpAddrStatus             RowStatus
        }

    hpicfIpAddrAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    The secondary IP address."
        ::= { hpicfIpAddrEntry 1 }

    hpicfIpAddrMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    The subnet mask for the address. If not specified
                    at the time of row creation, defaults to the
                    class-based netmask for the address."
        ::= { hpicfIpAddrEntry 2 }

    hpicfIpAddrStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    The status of an IP Address entry."
        ::= { hpicfIpAddrEntry 3 }


    -- Global default gateway config objects

    hpicfIpGlobalDefaultRouter OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This variable contains the IP address of the
                    default router for this system.  The value of
                    this object is ignored when ipForwarding is
                    equal to 'forwarding'.  This object is only used
                    when hpicfIpGlobalDefaultRouterSource is 'manual'.
                    Note that a configured static route to address
                    0.0.0.0 takes precedence over the value of this
                    object."
        ::= { hpicfBasicIpConfig 3 }

    hpicfIpGlobalPingRouter OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object is used to configure whether this
                    device will periodically send ICMP echo request
                    packets to its IP default router.  Since a
                    networking device typically does not transmit
                    unless it receives a management request, and since
                    some autodiscovery applications work by scanning
                    ARP caches, this ICMP echo can be used to try to
                    stay in our default router's ARP cache so that we
                    can be discovered.  This object allows the network
                    manager to enable or disable sending these ICMP echo
                    requests.  The value of this object is ignored when
                    ipForwarding is equal to 'forwarding'."
        ::= { hpicfBasicIpConfig 4 }

    hpicfIpZeroBroadcastEnable OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object is used to configure whether switch
                     should silently discard on receipt any packet 
                     addressed to 0.0.0.0 or {<Network>, 0}.If these 
                     packets are not silently discarded, they must be 
                     treated as IP broadcasts.This object is by default 
                     configured to discard zero broadcast packet"   
        ::= { hpicfBasicIpConfig 5 }


    hpicfBasicIpxConfig OBJECT IDENTIFIER ::= { hpicfBasic 9 }

    hpicfIpxConfigTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpxConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains IPX per-interface configuration
                    information that will take effect after the next
                    reset of the device."
        ::= { hpicfBasicIpxConfig 1 }

    hpicfIpxConfigEntry OBJECT-TYPE
        SYNTAX      HpicfIpxConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the hpicfIpxConfigTable containing the
                    IPX configuration information for a single
                    interface."
        INDEX       { ifIndex }
        ::= { hpicfIpxConfigTable 1 }

    HpicfIpxConfigEntry ::=
        SEQUENCE {
            hpicfIpxConfigNodeAddress       MacAddress,
            hpicfIpxConfigDefaultRouter     MacAddress,
            hpicfIpxConfigRouterEncaps      INTEGER,
            hpicfIpxConfigAdminStatus       INTEGER
        }

    hpicfIpxConfigNodeAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The IPX node address that the agent will use for
                    this interface.  Note that in many, but not all,
                    cases, this object duplicates the value of
                    ifPhysAddress."
        ::= { hpicfIpxConfigEntry 1 }

    hpicfIpxConfigDefaultRouter OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The IPX node address of the default router for
                    this interface."
        ::= { hpicfIpxConfigEntry 2 }

    hpicfIpxConfigRouterEncaps OBJECT-TYPE
        SYNTAX      INTEGER {
                        ethernetII(1),
                        ieee8022(2),
                        snap(3),
                        ieee8023Raw(4),
                        noGateway(5),
                        learn(6)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The type of encapsulation to for packets sent to
                    the default router on this interface.  Note that
                    some of the enumerations for this object may not
                    be appropriate for some interface types."
        ::= { hpicfIpxConfigEntry 3 }

    hpicfIpxConfigAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        enable(1),
                        disable(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this flag to 'enable' (the default) will
                    enable the IPX protocol stack on this interface.
                    Setting this flag to 'disable' will disable the IPX
                    protocol stack on this interface."
        ::= { hpicfIpxConfigEntry 4 }

    hpicfIpxNetTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpxNetEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains the IPX network number in use
                    for each encapsulation type on the agent's
                    interfaces.  This information is learned dynamically
                    by the agent.  An entry will only exist in this table
                    for a particular encapsulation type on a particular
                    interface if we have discovered a network number for
                    that encapsulation type on that interface."
        ::= { hpicfBasicIpxConfig 2 }

    hpicfIpxNetEntry OBJECT-TYPE
        SYNTAX      HpicfIpxNetEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, containing the IPX network
                    number for a single encapsulation type on one of the
                    agent's interfaces."
        INDEX       { ifIndex, hpicfIpxNetEncaps }
        ::= { hpicfIpxNetTable 1 }

    HpicfIpxNetEntry ::=
        SEQUENCE {
            hpicfIpxNetEncaps               INTEGER,
            hpicfIpxNetNumber               OCTET STRING
        }

    hpicfIpxNetEncaps OBJECT-TYPE
        SYNTAX      INTEGER {
                        ethernetII(1),
                        ieee8022(2),
                        snap(3),
                        ieee8023Raw(4)
                    }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The encapsulation type for this entry."
        ::= { hpicfIpxNetEntry 1 }

    hpicfIpxNetNumber OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(4))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The IPX network number for this encapsulation on
                    this interface, in network byte order."
        ::= { hpicfIpxNetEntry 2 }

    hpicfBasicTraps OBJECT IDENTIFIER ::= { hpicfBasic 10 }

    -- The HP ICF Fixed Trap Table

    hpicfFixedTrapTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfFixedTrapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table of mappings from notification ids to RMON
                    events.

                    This table contains one row for each notification
                    type supported by the agent.  It provides a way of
                    configuring an RMON eventTable entry to be triggered
                    whenever this notification occurs.  This way, each
                    notification can be configured to use a particular
                    community name (which selects a set of entries in
                    the trap destination table to send the notification
                    to), and provides a common point for configuring the
                    action to take when the notification condition
                    occurs."
        ::= { hpicfBasicTraps 1 }

    hpicfFixedTrapEntry OBJECT-TYPE
        SYNTAX      HpicfFixedTrapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, describing the mapping for
                    a single notification id."
        INDEX       { hpicfFixedTrapID }
        ::= { hpicfFixedTrapTable 1 }

    HpicfFixedTrapEntry ::=
        SEQUENCE {
            hpicfFixedTrapID                OBJECT IDENTIFIER,
            hpicfFixedTrapEventIndex        Integer32
        }

    hpicfFixedTrapID OBJECT-TYPE
        SYNTAX      OBJECT IDENTIFIER
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The object identifier of the notification this entry
                    provides mapping information for.

                    For notifications that are defined using the SNMPv2
                    NOTIFICATION-TYPE macro, the OID value assigned by
                    the macro is used directly as the hpicfFixedTrapID.
                    For traps defined using the SNMpv1 TRAP-TYPE macro,
                    the value of hpicfFixedTrapID is formed by adding
                    two subids to the trap enterprise.  The first added
                    subid is 0, and the second is the specific trap
                    value assigned by the macro to the trap.  Note: this
                    is the method specified in RFC 1908, 'Coexistence
                    between Version 1 and Version 2 of the
                    Internet-standard Network Management Framework' for
                    converting the enterprise and specific-trap fields
                    of a received Trap-PDU into a value of snmpTrapOID
                    for use in building an SNMPv2-Trap-PDU in a proxy
                    agent."
        ::= { hpicfFixedTrapEntry 1 }

    hpicfFixedTrapEventIndex OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The index of the eventEntry in the RMON MIB that
                    will be triggered when a condition exists for which
                    this notification is supposed to be sent.  The
                    eventEntry identified by a particular value of this
                    index is the same as indentified by the same value
                    of the eventIndex object.  If there is no
                    corresponding entry in the eventTable, then no
                    association exists.  In particular, if this value is
                    zero, no associated event will be generated, as zero
                    is not a valid event index.

                    Note that some agents may implement this object
                    read-only.  In this case, it will indicate a
                    permanent entry in the eventTable for each
                    notification."
        ::= { hpicfFixedTrapEntry 2 }

    hpicfTrapDestTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfTrapDestEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     A table of trap destinations."
        ::= { hpicfBasicTraps 2 }

    hpicfTrapDestEntry OBJECT-TYPE
        SYNTAX      HpicfTrapDestEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, containing information about
                    a single trap destination."
        INDEX       { hpicfTrapDestIndex }
        ::= { hpicfTrapDestTable 1 }

    HpicfTrapDestEntry ::=
        SEQUENCE {
            hpicfTrapDestIndex              Integer32,
            hpicfTrapDestVersion            INTEGER,
            hpicfTrapDestCommunity          OCTET STRING,
            hpicfTrapDestTDomain            TDomain,
            hpicfTrapDestTAddress           TAddress,
            hpicfTrapDestFilter             Integer32,
            hpicfTrapDestStatus             RowStatus,
	    hpicfTrapDestNotifyType         INTEGER,
	    hpicfTrapDestRetries            Interger32,
	    hpicfTrapDestTimeout            TimeInterval
        }

    hpicfTrapDestIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     A value that uniquely identifies this 
                     hpicfTrapDestEntry."
        ::= { hpicfTrapDestEntry 1 }

    hpicfTrapDestVersion OBJECT-TYPE
        SYNTAX      INTEGER {
                        snmpv1(1),
                        snmpv2c(2)
                    }
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what version of
                    SNMP should be used to send the trap to this
                    destination.  When the value of this object is
                    'snmpv1', the trap will be sent to this destination
                    as a Trap-PDU using an SNMPv1 message wrapper, as
                    specified in RFC 1157.  When the value of this
                    object is 'snmpv2c', the trap will be sent to this
                    destination as a SNMPv2-Trap-PDU using the
                    Community-based SNMPv2 framework as specified in
                    RFC 1901.

                    An agent should reject an attempt to set an instance
                    of this object to a value representing a version of
                    the SNMP framework that is not supported by that
                    agent."
        DEFVAL      { snmpv1 } 
        ::= { hpicfTrapDestEntry 2 }

    hpicfTrapDestCommunity OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(1..32))
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    A community to which this destination address
                    belongs.

                    This entry is associated with any entry in the RMON
                    MIB's eventTable whose value of eventCommunity is
                    equal to the value of this object.  Every time an
                    associated event entry sends a trap due to an event,
                    that trap will be sent to each address in the
                    hpicfTrapDestTable with a hpicfTrapDestCommunity
                    equal to eventCommunity.

                    This object may not be modified if the associated
                    hpicfTrapDestStatus object is equal to active(1)."
        DEFVAL      { '7075626C6963'h } -- public
        ::= { hpicfTrapDestEntry 3 }

    hpicfTrapDestTDomain OBJECT-TYPE
        SYNTAX      TDomain
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     The transport domain to use to send this trap.

                    This object may not be modified if the associated
                    hpicfTrapDestStatus object is equal to active(1)."
        ::= { hpicfTrapDestEntry 4 }

    hpicfTrapDestTAddress OBJECT-TYPE
        SYNTAX      TAddress
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    The address to send traps to on behalf of this
                    entry, formatted according to the value of the
                    corresponding instance of the hpicfTrapDestTDomain
                    object.

                    This object may not be modified if the associated
                    hpicfTrapDestStatus object is equal to active(1)."
        ::= { hpicfTrapDestEntry 5 }

    hpicfTrapDestFilter OBJECT-TYPE
        SYNTAX      Integer32 (0..31)
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    The type of events that will be sent to this trap
                    receiver.  This filter is mainly used for limiting
                    'system event' traps that will be sent to a specific
                    receiver.

                    This filter is specified as a sum of values, where
                    each value specifies a classification of traps that
                    will be sent to this trap receiver.  The value for a
                    particular trap class C is computed as 2 raised to
                    a value representing C.  The trap classes are
                    defined as follows:

                    C (bit#)   Trap class
                    -----------------------------------------------
                    0          SNMP traps
                    1          informational events
                    2          warning events
                    3          critical events
                    4          debug events (HP internal use only)

                    For example, to specify that this trap receiver
                    should recieve SNMP traps and critical event traps,
                    this object should be set to a value of 9 (2^0 +
                    2^3).

                    Note that some agents may not support
                    trap filtering.  Those agents may either implement
                    this object as read-only, or with a restricted
                    write syntax."
        DEFVAL      { 1 }   -- SNMP traps only
        ::= { hpicfTrapDestEntry 6 }

    hpicfTrapDestStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     The status of this trap destination entry.

                    An entry may not exist in the active state unless
                    all of the objects in the entry are consistent.  In
                    particular, the value of hpicfTrapDestAddress must
                    have a legal length and value for the protocol
                    specified by hpicfTrapDestProtocol."
        ::= { hpicfTrapDestEntry 7 }

    hpicfTrapDestNotifyType OBJECT-TYPE
        SYNTAX      INTEGER {
                        trap(1),
                        inform(2)
                    }
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what type of
                    SNMP trap/informs should be used.
                    When the value of this object is 'trap',
		    notifications will be sent. When the value of this
		    object is 'inform', informs will be sent."

        DEFVAL      { trap } 
        ::= { hpicfTrapDestEntry 8 }

    hpicfTrapDestRetries OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what number of
                    retries to be attempted when a response is not 
		    received for a generated message."

        DEFVAL      { 3 } 
        ::= { hpicfTrapDestEntry 9 }

    hpicfTrapDestTimeout OBJECT-TYPE
        SYNTAX      TimeInterval
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what number of
                    seconds between retries to be attempted when a 
		    response is not received for a generated message."

        DEFVAL      { 1500 } 
        ::= { hpicfTrapDestEntry 10 }

    -- HP Basic extensions to the Remote Monitoring MIB.

    hpicfBasicRmon  OBJECT IDENTIFIER ::= { hpicfBasic 11 }

    hpicfBasicAlarm OBJECT IDENTIFIER ::= { hpicfBasicRmon 3 }

    hpicfBasicAlarmNVCapacity OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The maximum number of alarmTable entries this
                    agent is capable of saving in nonvolatile storage."
        ::= { hpicfBasicAlarm 1 }

    hpicfBasicAlarmTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfBasicAlarmEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP ICF specific extension to the RMON alarm table."
        ::= { hpicfBasicAlarm 2 }

    hpicfBasicAlarmEntry OBJECT-TYPE
        SYNTAX      HpicfBasicAlarmEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Extensions for a single row in the RMON alarm
                    table."
        AUGMENTS    { alarmEntry }
        ::= { hpicfBasicAlarmTable 1 }

    HpicfBasicAlarmEntry ::=
        SEQUENCE {
            hpicfBasicAlarmStorageType      StorageType
        }

    hpicfBasicAlarmStorageType OBJECT-TYPE
        SYNTAX      StorageType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The storage type for this alarm entry."
        DEFVAL      { volatile }
        ::= { hpicfBasicAlarmEntry 1 }

    hpicfBasicEvent OBJECT IDENTIFIER ::= { hpicfBasicRmon 9 }

    hpicfBasicEventNVCapacity OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The maximum number of eventTable entries this
                    agent is capable of saving in nonvolatile storage."
        ::= { hpicfBasicEvent 1 }

    hpicfBasicEventTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfBasicEventEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP ICF specific extension to the RMON event table."
        ::= { hpicfBasicEvent 2 }

    hpicfBasicEventEntry OBJECT-TYPE
        SYNTAX      HpicfBasicEventEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Extensions for a single row in the RMON event
                    table."
        AUGMENTS    { eventEntry }
        ::= { hpicfBasicEventTable 1 }

    HpicfBasicEventEntry ::=
        SEQUENCE {
            hpicfBasicEventStorageType      StorageType
        }

    hpicfBasicEventStorageType OBJECT-TYPE
        SYNTAX      StorageType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The storage type for this event entry.

                    Rows having the value 'permanent' allow write access
                    to the associated instances of eventCommunity and
                    eventType."
        DEFVAL      { volatile }
        ::= { hpicfBasicEventEntry 1 }


    -- HP ICF Basic Traps

    hpicfSelfTestTrap NOTIFICATION-TYPE
        OBJECTS     { hpicfSelfTestResultText }
        STATUS      current
        DESCRIPTION "An hpicfSelfTestTrap indicates that the agent has
                    detected a non-critical failure.  The value of the
                    hpicfSelfTestResultText object describing the failure
                    is sent in the trap.  Note that this trap is sent
                    whenever a new failure is detected.

                    An agent should throttle the generation of
                    consecutive hpicfSelfTestTraps so that there is at
                    least a five-second gap between traps of this type.
                    When traps are throttled, the are dropped, not
                    queued for sending at a future time.  (Note that
                    'generating' a trap means sending to all configured
                    recipients.)."
        ::= { hpicfCommonTrapsPrefix 4 }


    -- HP ICF BASIC snmpTargetAddrLog Filter

    hpicfBasicSnmpTargetAddrLogFilter OBJECT IDENTIFIER ::= { hpicfBasic 12}

    hpicfSnmpTargetAddrLogFilterTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfSnmpTargetAddrLogFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Adds an HpicfSnmpTargetAddrLogFilterEntry to
                     snmpTargetAddrTable."
        ::= { hpicfBasicSnmpTargetAddrLogFilter 1}

    hpicfSnmpTargetAddrLogFilterEntry OBJECT-TYPE
        SYNTAX      HpicfSnmpTargetAddrLogFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Adds an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable."
        AUGMENTS    { snmpTargetAddrEntry }
        ::= { hpicfSnmpTargetAddrLogFilterTable 1 }

    HpicfSnmpTargetAddrLogFilterEntry ::= SEQUENCE {
        hpicfSnmpTargetAddrLogFilter Integer32 (0..31)
    }

    hpicfSnmpTargetAddrLogFilter OBJECT-TYPE
        SYNTAX      Integer32 (0..31)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The type of events that will be sent to this trap
                    receiver.  This filter is mainly used for limiting
                    'system event' traps that will be sent to a specific
                    receiver.

                    This filter is specified as a sum of values, where
                    each value specifies a classification of traps that
                    will be sent to this trap receiver.  The value for a
                    particular trap class C is computed as 2 raised to
                    a value representing C.  The trap classes are
                    defined as follows:

                    C (bit#)   Trap class
                    -----------------------------------------------
                    0          SNMP traps
                    1          informational events
                    2          warning events
                    3          critical events
                    4          debug events (HP internal use only)

                    For example, to specify that this trap receiver
                    should recieve SNMP traps and critical event traps,
                    this object should be set to a value of 9 (2^0 +
                    2^3).

                    Note that some agents may not support
                    trap filtering.  Those agents may either implement
                    this object as read-only, or with a restricted
                    write syntax."
        DEFVAL      { 1 }   -- SNMP traps only
        ::= { hpicfSnmpTargetAddrLogFilterEntry 1 } 

    -- HP ICF BASIC Domain Name Services Objects 

    hpicfBasicDNSConfig OBJECT IDENTIFIER ::= { hpicfBasic 15}

    hpicfDNSDefaultDomainSuffix OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..255))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The default domain name (A unique designator on the 
                     network composed of symbols separated by dots) to 
                     which resolver appends host names before sending the 
                     queries to name servers.  An example of a valid 
                     default domain suffix is 'hp.com'.  The resolver
                     will not use a default domain suffix if this object 
                     is set to empty-string (which is the default value.)" 
        ::= { hpicfBasicDNSConfig 1 }

    hpicfDNSNameServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "#### Deprecated #### A table that contains information about the 
                    (DNS) Name Server configuration in this 
                    device."
        ::= { hpicfBasicDNSConfig 2 }

    hpicfDNSNameServerEntry OBJECT-TYPE
        SYNTAX      HpicfDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "### deprecated ###Information about name server configuration entry
                     on this resolver device. "
        INDEX       { hpicfDNSNameServerAddress }
        ::= { hpicfDNSNameServerTable 1 }
       
    HpicfDNSNameServerEntry ::=
        SEQUENCE {
            hpicfDNSNameServerAddress     IpAddress,
            hpicfDNSNameServerEntryStatus RowStatus 
        }

    hpicfDNSNameServerAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      deprecated 
        DESCRIPTION "### Deprecated ###IPv4 address of the given name server."
        ::= { hpicfDNSNameServerEntry 1 }

    hpicfDNSNameServerEntryStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "### Deprecated ###The row status of a given name server entry."
        ::= { hpicfDNSNameServerEntry 2 }

    hpicfInetDNSNameServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfInetDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table that contains information about the 
                    (DNS) Name Server configuration in this 
                    device.This table has 3 index's PRIORITY ADDRTYPE
                    ADDR,for each pririoty only one address can be configured."

        ::= { hpicfBasicDNSConfig 3 }

    hpicfInetDNSNameServerEntry OBJECT-TYPE
        SYNTAX      HpicfInetDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in hpicfInetDNSNameServerEntry contains single 
                     manually configured DNS Address
                     on this resolver device. "
        INDEX       { hpicfInetDNSNameServerAddrIndex,
							 hpicfInetDNSNameServerAddrType, 
                      hpicfInetDNSNameServerAddress }
        ::= { hpicfInetDNSNameServerTable 1 }
       
    HpicfInetDNSNameServerEntry ::=
        SEQUENCE {
				hpicfInetDNSNameServerAddrIndex	 INTEGER, 
            hpicfInetDNSNameServerAddrType    InetAddressType,
            hpicfInetDNSNameServerAddress     InetAddress,
            hpicfInetDNSNameServerEntryStatus RowStatus 
        }

	 hpicfInetDNSNameServerAddrIndex OBJECT-TYPE
		SYNTAX		INTEGER(0..255)	
		MAX-ACCESS 	not-accessible
		STATUS	   current
    DESCRIPTION "Index(which is also treated as priority) of DNS server address
                 configured."
		 ::=	{ hpicfInetDNSNameServerEntry 1 }
			
    hpicfInetDNSNameServerAddrType OBJECT-TYPE
        SYNTAX      InetAddressType
        MAX-ACCESS  not-accessible
        STATUS      current 
        DESCRIPTION "Address Type of the DNS Name server stored in hpicfInetDNSNameServer
                     Address."
        ::= { hpicfInetDNSNameServerEntry 2 }

    hpicfInetDNSNameServerAddress OBJECT-TYPE
        SYNTAX      InetAddress  
        MAX-ACCESS  not-accessible
        STATUS      current 
        DESCRIPTION "Address of DNS and type of address stored is
                      is mentioned in hpicfInetDNSNameServerAddType 
                     This field needs to be used in conjuction with 
                     hpicfInetDNSNameServerAddrType."
        ::= { hpicfInetDNSNameServerEntry 3 }

    hpicfInetDNSNameServerEntryStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The row status of a given name server entry."
        ::= { hpicfInetDNSNameServerEntry 4 }
    -- HP ICF BASIC Banner 

    hpicfBannerStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', it means
                    that the banner has been configured and will be displayed
                    at console or web-ui login. When the value of this object 
		    is disabled(2), it means the banner has been unconfigured."
	DEFVAL      { 1 } 	    
		    
        ::= { hpicfBasic 13 }

    hpicfBanner     OBJECT IDENTIFIER ::= { hpicfBasic 14}

    hpicfBannerMOTD OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(1..1300)) 
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "An administratively configured message that is displayed 
                     to the user when logged in to the device through 
                     either the console or web-ui"
        ::= { hpicfBanner 1 }


   hpicfResetDefault OBJECT-TYPE
        SYNTAX      INTEGER {
                        primary(1),
                        secondary(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The switch boots from 'primary image' or 'secondary image' 
                    based on this object."
        ::= { hpicfBasic 16 }


   hpicfTelnet6Enable OBJECT-TYPE
	SYNTAX      INTEGER {
			enabled(1),
			disabled(2)
		    }
        MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION "When the value of this object is 'enabled(1)', the
	             telnet6 server on this agent is running and allowed to
		     accept connections.  When the value of this object is
		     'disabled(2)', no incoming telnet6 connections will be
		     accepted by this agent."
        ::= { hpicfBasic 17 }


    -- Conformance information

    hpicfBasicConformance OBJECT IDENTIFIER ::= { hpicfBasicMib 1 }

    hpicfBasicCompliances OBJECT IDENTIFIER ::= { hpicfBasicConformance 1 }
    hpicfBasicGroups      OBJECT IDENTIFIER ::= { hpicfBasicConformance 2 }

    -- compliance statements


    hpicfBasicCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********

                    A compliance statement basic management and
                    configuration of HP ICF hubs."
        MODULE
            MANDATORY-GROUPS { hpicfBasicGroup }

            GROUP       hpicfTelnetGroup
            DESCRIPTION "This group is required for devices that
                        support telnet access."

        ::= { hpicfBasicCompliances 1 }


    hpicfNewBasicCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********

                    A new compliance statement for this module."
        MODULE
            MANDATORY-GROUPS { hpicfNewBasicGroup,
                               hpicfBasicIpConfigGroup,
                               hpicfBasicIpxConfigGroup,
                               hpicfBasicFixedTrapGroup,
                               hpicfBasicTrapDestGroup,
                               hpicfBasicRmonNVGroup,
                               hpicfBasicSelfTestNotifyGroup }

            GROUP       hpicfDiscoverGroup
            DESCRIPTION "This group is required for devices that use
                        the mapping announcement feature for topology.
                        This method is generally only used in devices
                        that would ordinarily not be originating traffic
                        other than responses to network management
                        requests (e.g. repeaters and switches)."

--            GROUP       hpicfBasicSnmpNotifyLogFilterTable
--             DESCRIPTION "This group is required for devices that support
--                         SNMPv3."

            OBJECT      hpicfIpConfigPingRouter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is only required
                        in devices that would ordinarily not be
                        originating traffic other than responses to
                        network management requests (e.g. repeaters and
                        switches)."

            OBJECT      hpicfIpConfigMtu
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfFixedTrapEventIndex
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required.
                        This would allow configuration of the
                        community name and action to be taken for each
                        fixed trap, but would not allow changing the
                        eventIndex that the trap points to."

            OBJECT      hpicfTrapDestFilter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfTrapDestVersion
            SYNTAX      INTEGER { snmpv1(1) }
            DESCRIPTION "Support for the 'snmpv2c' enumeration should
                        only be implemented if the agent supports the
                        Community-based SNMPv2 framework."

        ::= { hpicfBasicCompliances 2 }

    hpicfBasicCompliance3 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION  "********* THIS COMPLIANCE IS DEPRECATED *********"

        MODULE
            MANDATORY-GROUPS { hpicfNewBasicGroup,
                               hpicfBasicIpConfigGroup2,
                               hpicfBasicFixedTrapGroup,
                               hpicfBasicTrapDestGroup,
                               hpicfBasicSelfTestNotifyGroup }

            GROUP       hpicfBasicIpxConfigGroup
            DESCRIPTION "This group is only required for devices that
                        support management access over an IPX
                        protocol stack."

            GROUP       hpicfAnnounceDiscoveryGroup
            DESCRIPTION "This group is required for devices that use
                        the mapping announcement feature for topology.
                        This method is generally only used in devices
                        that would ordinarily not be originating traffic
                        other than responses to network management
                        requests (e.g. repeaters and switches)."

            GROUP       hpicfBasicRmonNVGroup
            DESCRIPTION "This group is only required for devices that
                        allow management stations to selectively store
                        RMON alarms and events in non-volatile memory."

            OBJECT      hpicfIpGlobalPingRouter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is only required
                        in devices that would ordinarily not be
                        originating traffic other than responses to
                        network management requests (e.g. repeaters and
                        switches)."

            OBJECT      hpicfIpConfigMtu
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfFixedTrapEventIndex
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required.
                        This would allow configuration of the
                        community name and action to be taken for each
                        fixed trap, but would not allow changing the
                        eventIndex that the trap points to."

            OBJECT      hpicfTrapDestFilter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfTrapDestVersion
            SYNTAX      INTEGER { snmpv1(1) }
            DESCRIPTION "Support for the 'snmpv2c' enumeration should
                        only be implemented if the agent supports the
                        Community-based SNMPv2 framework."

        ::= { hpicfBasicCompliances 3 }


    hpicfBasicCompliance4 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION  "********* THIS COMPLIANCE IS DEPRECATED *********"
        MODULE
            MANDATORY-GROUPS { hpicfNewBasicGroup,
                               hpicfBasicIpConfigGroup2,
                               hpicfBasicFixedTrapGroup,
                               hpicfBasicSelfTestNotifyGroup }

            GROUP       hpicfBasicIpxConfigGroup
            DESCRIPTION "This group is only required for devices that
                        support management access over an IPX
                        protocol stack."

            GROUP       hpicfAnnounceDiscoveryGroup
            DESCRIPTION "This group is required for devices that use
                        the mapping announcement feature for topology.
                        This method is generally only used in devices
                        that would ordinarily not be originating traffic
                        other than responses to network management
                        requests (e.g. repeaters and switches)."

            GROUP       hpicfBasicRmonNVGroup
            DESCRIPTION "This group is only required for devices that
                        allow management stations to selectively store
                        RMON alarms and events in non-volatile memory."

            GROUP       hpicfSnmpTargetAddrLogFilterGroup
            DESCRIPTION "This group is required for devices that supports
                         SNMPv3 and log filtering."

            OBJECT      hpicfIpGlobalPingRouter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is only required
                        in devices that would ordinarily not be
                        originating traffic other than responses to
                        network management requests (e.g. repeaters and
                        switches)."

            OBJECT      hpicfIpConfigMtu
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfFixedTrapEventIndex
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required.
                        This would allow configuration of the
                        community name and action to be taken for each
                        fixed trap, but would not allow changing the
                        eventIndex that the trap points to."

        ::= { hpicfBasicCompliances 4 }

    hpicfBasicCompliance5 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION  "********* THIS COMPLIANCE IS DEPRECATED *********"
        MODULE
            MANDATORY-GROUPS { hpicfNewBasicGroup,
                               hpicfBasicIpConfigGroup3,
                               hpicfBasicFixedTrapGroup,
                               hpicfBasicSelfTestNotifyGroup,
                               hpicfBasicBannerGroup }

            GROUP       hpicfBasicIpxConfigGroup
            DESCRIPTION "This group is only required for devices that
                        support management access over an IPX
                        protocol stack."

            GROUP       hpicfAnnounceDiscoveryGroup
            DESCRIPTION "This group is required for devices that use
                        the mapping announcement feature for topology.
                        This method is generally only used in devices
                        that would ordinarily not be originating traffic
                        other than responses to network management
                        requests (e.g. repeaters and switches)."

            GROUP       hpicfBasicRmonNVGroup
            DESCRIPTION "This group is only required for devices that
                        allow management stations to selectively store
                        RMON alarms and events in non-volatile memory."

            GROUP       hpicfSnmpTargetAddrLogFilterGroup
            DESCRIPTION "This group is required for devices that supports
                         SNMPv3 and log filtering."

            OBJECT      hpicfIpGlobalPingRouter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is only required
                        in devices that would ordinarily not be
                        originating traffic other than responses to
                        network management requests (e.g. repeaters and
                        switches)."

            OBJECT      hpicfIpConfigMtu
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfFixedTrapEventIndex
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required.
                        This would allow configuration of the
                        community name and action to be taken for each
                        fixed trap, but would not allow changing the
                        eventIndex that the trap points to."

        ::= { hpicfBasicCompliances 5 }

    hpicfBasicCompliance6 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********"
        MODULE
            MANDATORY-GROUPS { hpicfNewBasicGroup,
                               hpicfBasicIpConfigGroup3,
                               hpicfBasicFixedTrapGroup,
                               hpicfBasicSelfTestNotifyGroup
                               }

            GROUP       hpicfBasicIpxConfigGroup
            DESCRIPTION "This group is only required for devices that
                        support management access over an IPX
                        protocol stack."

            GROUP       hpicfAnnounceDiscoveryGroup
            DESCRIPTION "This group is required for devices that use
                        the mapping announcement feature for topology.
                        This method is generally only used in devices
                        that would ordinarily not be originating traffic
                        other than responses to network management
                        requests (e.g. repeaters and switches)."

            GROUP       hpicfBasicRmonNVGroup
            DESCRIPTION "This group is only required for devices that
                        allow management stations to selectively store
                        RMON alarms and events in non-volatile memory."

            GROUP       hpicfSnmpTargetAddrLogFilterGroup
            DESCRIPTION "This group is required for devices that supports
                         SNMPv3 and log filtering."

            OBJECT      hpicfIpGlobalPingRouter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is only required
                        in devices that would ordinarily not be
                        originating traffic other than responses to
                        network management requests (e.g. repeaters and
                        switches)."

            OBJECT      hpicfIpConfigMtu
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfFixedTrapEventIndex
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required.
                        This would allow configuration of the
                        community name and action to be taken for each
                        fixed trap, but would not allow changing the
                        eventIndex that the trap points to."

            GROUP       hpicfBasicDNSConfigGroup
            DESCRIPTION "This group is only required for devices that
                        support DNS resolver capability."

        ::= { hpicfBasicCompliances 6 }

    hpicfBasicCompliance7 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "An updated compliance statement for this module."
        MODULE
            MANDATORY-GROUPS { hpicfBasicGroup1,
                               hpicfBasicIpConfigGroup3,
                               hpicfBasicFixedTrapGroup,
                               hpicfBasicSelfTestNotifyGroup
                               }

            GROUP       hpicfBasicIpxConfigGroup
            DESCRIPTION "This group is only required for devices that
                        support management access over an IPX
                        protocol stack."

            GROUP       hpicfAnnounceDiscoveryGroup
            DESCRIPTION "This group is required for devices that use
                        the mapping announcement feature for topology.
                        This method is generally only used in devices
                        that would ordinarily not be originating traffic
                        other than responses to network management
                        requests (e.g. repeaters and switches)."

            GROUP       hpicfBasicRmonNVGroup
            DESCRIPTION "This group is only required for devices that
                        allow management stations to selectively store
                        RMON alarms and events in non-volatile memory."

            GROUP       hpicfSnmpTargetAddrLogFilterGroup
            DESCRIPTION "This group is required for devices that supports
                         SNMPv3 and log filtering."

            OBJECT      hpicfIpGlobalPingRouter
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is only required
                        in devices that would ordinarily not be
                        originating traffic other than responses to
                        network management requests (e.g. repeaters and
                        switches)."

            OBJECT      hpicfIpConfigMtu
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required."

            OBJECT      hpicfFixedTrapEventIndex
            MIN-ACCESS  read-only
            DESCRIPTION "Write access to this object is not required.
                        This would allow configuration of the
                        community name and action to be taken for each
                        fixed trap, but would not allow changing the
                        eventIndex that the trap points to."

            GROUP       hpicfBasicDNSConfigGroup
            DESCRIPTION "This group is only required for devices that
                        support DNS resolver capability."

        ::= { hpicfBasicCompliances 7 }



    -- units of conformance

    hpicfBasicGroup OBJECT-GROUP
        OBJECTS     { hpicfReset,
                      hpicfSelfTest
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for basic reset/selftest
                    control on ICF devices."
        ::= { hpicfBasicGroups 1 }

    hpicfTelnetGroup OBJECT-GROUP
        OBJECTS     { hpicfTelnetEnable }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for managing the telnet
                    server on ICF devices."
        ::= { hpicfBasicGroups 2 }

    hpicfNewBasicGroup OBJECT-GROUP
        OBJECTS     { hpicfReset,
                      hpicfSelfTest,
                      hpicfTelnetEnable,
                      hpicfConfigClear,
                      hpicfSelfTestResultCode,
                      hpicfSelfTestResultText,
                      hpicfSelfTestResultTime,
                      hpicfBannerStatus }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for basic management of
                    ICF devices."
        ::= { hpicfBasicGroups 3 }

    hpicfDiscoverGroup OBJECT-GROUP
        OBJECTS     { hpicfAnnounceAddress,
                      hpicfIfEntLogicalIndex }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects to assist in discovering
                    and mapping ICF devices."
        ::= { hpicfBasicGroups 4 }

    hpicfBasicIpConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfIpConfigAddress,
                      hpicfIpConfigAddrMask,
                      hpicfIpConfigDefaultRouter,
                      hpicfIpConfigPingRouter,
                      hpicfIpConfigMtu,
                      hpicfIpConfigAdminStatus
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for configuring the IP
                    protocol stack in ICF agents."
        ::= { hpicfBasicGroups 5 }

    hpicfBasicIpxConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfIpxConfigNodeAddress,
                      hpicfIpxConfigDefaultRouter,
                      hpicfIpxConfigRouterEncaps,
                      hpicfIpxConfigAdminStatus,
                      hpicfIpxNetNumber
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the IPX
                    protocol stack in ICF agents."
        ::= { hpicfBasicGroups 6 }

    hpicfBasicFixedTrapGroup OBJECT-GROUP
        OBJECTS     { hpicfFixedTrapEventIndex }
        STATUS      current
        DESCRIPTION "A collection of objects for managing fixed
                    (i.e. non-threshold) traps on ICF devices.
                    Implementation of this group requires
                    implementation of the RMON event group."
        ::= { hpicfBasicGroups 7 }

    hpicfBasicTrapDestGroup OBJECT-GROUP
        OBJECTS     { hpicfTrapDestVersion,
                      hpicfTrapDestCommunity,
                      hpicfTrapDestTDomain,
                      hpicfTrapDestTAddress,
                      hpicfTrapDestFilter,
                      hpicfTrapDestStatus
                    }
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    A collection of objects for configuring trap
                    destinations on ICF devices.  Implementation of this
                    group requires implementation of the RMON event
                    group."
        ::= { hpicfBasicGroups 8 }

    hpicfBasicRmonNVGroup OBJECT-GROUP
        OBJECTS     { hpicfBasicAlarmNVCapacity,
                      hpicfBasicAlarmStorageType,
                      hpicfBasicEventNVCapacity,
                      hpicfBasicEventStorageType
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for controlling which
                    RMON alarm and event table entries are saved in
                    non-volatile storage."
        ::= { hpicfBasicGroups 9 }

    hpicfBasicSelfTestNotifyGroup NOTIFICATION-GROUP
        NOTIFICATIONS { hpicfSelfTestTrap }
        STATUS        current
        DESCRIPTION   "A collection of notifications used to indicate
                      changes in selfTest status"
        ::= { hpicfBasicGroups 10 }

    hpicfBasicWebAgentGroup OBJECT-GROUP
        OBJECTS     { hpicfWebAgentEnable }
        STATUS      current
        DESCRIPTION "A collection of objects for managing the EHTTPD
                    server in ICF devices."
        ::= { hpicfBasicGroups 11 }

    hpicfAnnounceDiscoveryGroup OBJECT-GROUP
        OBJECTS     { hpicfAnnounceDiscoveryAddress }
        STATUS      current
        DESCRIPTION "A collection of objects to assist in discovering
                    and mapping ICF devices."
        ::= { hpicfBasicGroups 12 }

    hpicfBasicIpConfigGroup2 OBJECT-GROUP
        OBJECTS     { hpicfIpConfigAddress,
                      hpicfIpConfigAddrMask,
                      hpicfIpConfigMtu,
                      hpicfIpConfigAdminStatus,
                      hpicfIpGlobalDefaultRouter,
                      hpicfIpGlobalPingRouter
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the IP
                    protocol stack in agents that support only a
                    single global default router."
        ::= { hpicfBasicGroups 13 }

    hpicfBasicProxyArpGroup OBJECT-GROUP
        OBJECTS     { hpicfIpConfigProxyArp }
        STATUS      current
        DESCRIPTION "A group of objects for configuring proxy ARP
                    on devices that support IP forwarding."
        ::= { hpicfBasicGroups 14 }

    hpicfBasicIpSecondaryGroup OBJECT-GROUP
        OBJECTS     { hpicfIpAddrMask,
                      hpicfIpAddrStatus
                    }
        STATUS      current
        DESCRIPTION "A group of objects for configuring secondary IP
                    addresses on devices that support more than one
                    IP address on an interface."
        ::= { hpicfBasicGroups 15 }

    hpicfSnmpTargetAddrLogFilterGroup OBJECT-GROUP
        OBJECTS     { hpicfSnmpTargetAddrLogFilter }
        STATUS      current
        DESCRIPTION "A group of objects to add an HpicfSnmpTargetAddrLogFilterEntry
                     to snmpTargetAddrTable."
        ::= { hpicfBasicGroups 16 }

    hpicfBasicIpConfigGroup3 OBJECT-GROUP
        OBJECTS     { hpicfIpConfigAddress,
                      hpicfIpConfigAddrMask,
                      hpicfIpConfigMtu,
                      hpicfIpConfigAdminStatus,
                      hpicfIpGlobalDefaultRouter,
                      hpicfIpGlobalPingRouter,
                      hpicfIpZeroBroadcastEnable 
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the IP
                    protocol stack in agents that support only a
                    single global default router."
        ::= { hpicfBasicGroups 17 }

    hpicfBasicBannerGroup OBJECT-GROUP
        OBJECTS     { hpicfBannerMOTD }
        STATUS      current
        DESCRIPTION "A group of objects for configuring banners for
                     display on console and web-ui at login"
        ::= { hpicfBasicGroups 18 }

    hpicfBasicDNSConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfDNSDefaultDomainSuffix,
                      hpicfDNSNameServerEntryStatus
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the DNS
                     resolver facility in agents that are capable of
                     resolving host names to IP addresses."
        ::= { hpicfBasicGroups 19 }

    hpicfBasicGroup1 OBJECT-GROUP
        OBJECTS     { hpicfReset,
                      hpicfSelfTest,
                      hpicfTelnetEnable,
                      hpicfConfigClear,
                      hpicfSelfTestResultCode,
                      hpicfSelfTestResultText,
                      hpicfSelfTestResultTime,
                      hpicfBannerStatus,
                      hpicfResetDefault }
        STATUS      current
        DESCRIPTION "A collection of objects for basic management of
                    ICF devices."
        ::= { hpicfBasicGroups 20 }

END