path: root/MIBS/hp/ICF-VG-RPTR

       ICF-VG-RPTR DEFINITIONS ::= BEGIN

       IMPORTS
           Integer32, Counter32, Counter64, 
           OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
               FROM SNMPv2-SMI
           DisplayString, MacAddress, TruthValue, TimeStamp
               FROM SNMPv2-TC
           MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
               FROM SNMPv2-CONF
           hpicfObjectModules, icfVgRepeater
               FROM HP-ICF-OID;

       icfVgRepeaterMib MODULE-IDENTITY
            LAST-UPDATED "200011032225Z"  -- November 3, 2000
            ORGANIZATION "Hewlett Packard Company,
                          Network Infrastructure Solutions"
            CONTACT-INFO
                    "Hewlett Packard Company
                     8000 Foothills Blvd.
                     Roseville, CA 95747"
            DESCRIPTION
                    "This MIB module contains objects for managing
                    HP AdvanceStack 100VG-AnyLAN repeaters.  It is
                    expected that this module will be superceded by
                    a standard 802.12 Repeater MIB."

            REVISION     "200011032225Z"  -- November 3, 2000
            DESCRIPTION  "Updated division name."

            REVISION     "9703060347Z"  -- March 6, 1997
            DESCRIPTION
                    "Added NOTIFICATION-GROUP information."
            REVISION     "9609100203Z"  -- September 10, 1996
            DESCRIPTION
                    "Updated division name and STATUS info."
            REVISION     "9601250356Z"  -- January 25, 1996
            DESCRIPTION
                    "Split this MIB module from the former monolithic
                    hp-icf MIB.  Added support for and full 802.12
                    compliance."
            REVISION     "9501180000Z"  -- January 18, 1995
            DESCRIPTION
                    "Initial version of this MIB module.  Released with
                    the HPJ2414A agent card for the HPJ2410A 100VG
                    repeater."
            ::= { hpicfObjectModules 10 }



       icfVgBasic         OBJECT IDENTIFIER ::= { icfVgRepeater 1 }
       icfVgBasicRptr     OBJECT IDENTIFIER ::= { icfVgBasic 1 }

       icfVgMACAddress OBJECT-TYPE
           SYNTAX     MacAddress
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The MAC address used by the repeater when it
                   initiates training on the uplink port.  Repeaters
                   are allowed to train with an assigned MAC address or
                   a null (all zeroes) MAC address."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aMACAddress."
           ::= { icfVgBasicRptr 1 }

       icfVgCurrentFramingType OBJECT-TYPE
           SYNTAX     INTEGER {
                          frameType88023(1),
                          frameType88025(2)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The type of framing (802.3 or 802.5) currently in
                   use by the repeater."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aCurrentFramingType."
           ::= { icfVgBasicRptr 2 }

       icfVgDesiredFramingType OBJECT-TYPE
           SYNTAX     INTEGER {
                          frameType88023(1),
                          frameType88025(2)
                      }
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "The type of framing which will be used by the
                   repeater after the next time it is reset.  The value
                   of this object should be preserved across repeater
                   resets and power failures"
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aDesiredFramingType."
           ::= { icfVgBasicRptr 3 }

       icfVgFramingCapability OBJECT-TYPE
           SYNTAX     INTEGER {
                          frameType88023(1),
                          frameType88025(2),
                          frameTypeEither(3)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The type of framing this repeater is capable of
                   supporting."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aFramingCapability."
           ::= { icfVgBasicRptr 4 }

       icfVgTrainingVersion OBJECT-TYPE
           SYNTAX     Integer32 (0..7)
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The highest version bits (vvv bits) supported by the
                   repeater during training."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aRMACVersion."
           ::= { icfVgBasicRptr 5 }

       icfVgRepeaterGroupCapacity OBJECT-TYPE
           SYNTAX     Integer32 (1..1024)
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The icfVgGroupCapacity is the number of groups that
                   can be contained within the repeater.  Within each
                   managed repeater, the groups are uniquely numbered in
                   the range from 1 to icfVgRepeaterGroupCapacity.

                   Some groups may not be present in the repeater, in
                   which case the actual number of groups present will
                   be less than icfVgRepeaterGroupCapacity.  The number
                   of groups present is never greater than
                   icfVgRepeaterGroupCapacity."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aRepeaterGroupCapacity."
           ::= { icfVgBasicRptr 6 }

       icfVgRepeaterHealthState OBJECT-TYPE
           SYNTAX     INTEGER {
                          other(1),
                          ok(2),
                          rptrFailure(3),
                          groupFailure(4),
                          portFailure(5),
                          generalFailure(6)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The icfVgRepeaterHealthState object indicates the
                   operational state of the repeater.  The
                   icfVgRepeaterHealthText may be consulted for more
                   specific information about the state of the 
                   repeater's health.

                   In the case of multiple kinds of failures (e.g.,
                   repeater failure and port failure), the value of this
                   attribute shall reflect the highest priority failure
                   in the following order, listed highest priority 
                   first:

                       rptrFailure(3)
                       groupFailure(4)
                       portFailure(5)
                       generalFailure(6)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aRepeaterHealthState."
           ::= { icfVgBasicRptr 7 }

       icfVgRepeaterHealthText OBJECT-TYPE
           SYNTAX     DisplayString (SIZE(0..255))
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The health text object is a text string that 
                   provides information relevant to the operational 
                   state of the repeater.  Agents may use this string to
                   provide detailed information on current failures,
                   including how they were detected, and/or instructions
                   for problem resolution.  The contents are agent
                   specific."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.1, aRepeaterHealthText."
           ::= { icfVgBasicRptr 8 }

       icfVgRepeaterReset OBJECT-TYPE
           SYNTAX     INTEGER {
                          noReset(1),
                          reset(2)
                      }
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "Setting this object to reset(2) causes the repeater
                   to transition to its initial state as specified in
                   clause 12 [IEEE Draft Std 802.12].

                   Setting this object to noReset(1) has no effect.  The
                   agent will always return the value noReset(1) when
                   this object is read.

                   After receiving a request to set this variable to
                   reset(2), the agent is allowed to delay the reset for
                   a short period.  For example, the implementor may
                   choose to delay the reset long enough to allow the
                   SNMP response to be transmitted.  In any event, the
                   SNMP response must be transmitted.

                   This action does not reset the management counters
                   defined in this document nor does it affect the
                   icfVgPortAdminStatus parameters.  Included in this
                   action is the execution of a disruptive Self-Test
                   with the following characteristics:  a) The nature
                   of the tests is not specified.  b) The test resets
                   the repeater but without affecting management
                   information about the repeater.  c) The test does not
                   inject packets onto any segment.  d) Packets received
                   during the test may or may not be transferred.
                   e) The test does not interfere with management
                   functions.

                   After performing this self-test, the agent will
                   update the repeater health information (including
                   icfVgRepeaterHealthState and
                   icfVgRepeaterHealthText)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.2, acResetRepeater."
           ::= { icfVgBasicRptr 9 }

       icfVgRepeaterNonDisruptTest OBJECT-TYPE
           SYNTAX     INTEGER {
                          noSelfTest(1),
                          selfTest(2)
                      }
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "Setting this object to selfTest(2) causes the
                   repeater to perform an agent-specific, non-disruptive
                   self-test that has the following characteristics:
                   a) The nature of the tests is not specified.  b) The
                   test does not change the state of the repeater or
                   management information about the repeater.  c) The
                   test does not inject packets onto any segment. 
                   d) The test does not prevent the relay of any
                   packets.  e) The test does not interfere with
                   management functions.

                   After performing this test, the agent will update the
                   repeater health information (including
                   icfVgRepeaterHealthState and
                   icfVgRepeaterHealthText).

                   Note that this definition allows returning an 'okay'
                   result after doing a trivial test.

                   Setting this object to noSelfTest(1) has no effect.
                   The agent will always return the value noSelfTest(1)
                   when this object is read."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.2, acExecuteNonDisruptiveSelfTest."
           ::= { icfVgBasicRptr 10 }

       icfVgBasicGroup    OBJECT IDENTIFIER ::= { icfVgBasic 2 }

       icfVgBasicGroupTable OBJECT-TYPE
           SYNTAX     SEQUENCE OF IcfVgBasicGroupEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "A table containing information about groups of
                   ports."
           ::= { icfVgBasicGroup 1 }

       icfVgBasicGroupEntry OBJECT-TYPE
           SYNTAX     IcfVgBasicGroupEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "An entry in the icfVgBasicGroupTable, containing
                   information about a single group of ports."
           INDEX      { icfVgGroupIndex }
           ::= { icfVgBasicGroupTable 1 }

       IcfVgBasicGroupEntry ::=
           SEQUENCE {
               icfVgGroupIndex                 Integer32,
               icfVgGroupDescr                 DisplayString,
               icfVgGroupObjectID              OBJECT IDENTIFIER,
               icfVgGroupOperStatus            INTEGER,
               icfVgGroupLastOperStatusChange  TimeStamp,
               icfVgGroupPortCapacity          Integer32,
               icfVgGroupCablesBundled         INTEGER
           }

       icfVgGroupIndex OBJECT-TYPE
           SYNTAX     Integer32 (1..1024)
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "This object identifies the group within the repeater
                   for which this entry contains information.  This
                   value is never greater than
                   icfVgRepeaterGroupCapacity."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.4.1, aGroupID."
           ::= { icfVgBasicGroupEntry 1 }

       icfVgGroupDescr OBJECT-TYPE
           SYNTAX     DisplayString (SIZE (0..255))
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "A textual description of the group.  This value
                   should include the full name and version
                   identification of the group's hardware type and
                   indicate how the group is differentiated from other
                   types of groups in the repeater.  'Plug-in Module,
                   Rev A' or 'Barney Rubble 100BaseVG 4-port socket
                   Version 2.1' are examples of valid group
                   descriptions.

                   It is mandatory that this only contain printable
                   ASCII characters."
           ::= { icfVgBasicGroupEntry 2 }

       icfVgGroupObjectID OBJECT-TYPE
           SYNTAX     OBJECT IDENTIFIER
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The vendor's authoritative identification of the
                   group.  This value may be allocated within the SMI
                   enterprises subtree (1.3.6.1.4.1) and provides a
                   straight-forward and unambiguous means for
                   determining what kind of group is being managed.

                   For example, this object could take the value
                   1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones, Inc.'
                   was assigned the subtree 1.3.6.1.4.1.4242, and had
                   assigned the identifier 1.3.6.1.4.1.4242.1.2.14 to
                   its 'Wilma Flintstone 6-Port Plug-in Module.'"
           ::= { icfVgBasicGroupEntry 3 }

       icfVgGroupOperStatus OBJECT-TYPE
           SYNTAX     INTEGER {
                          other(1),
                          operational(2),
                          malfunctioning(3),
                          notPresent(4),
                          underTest(5),
                          resetInProgress(6)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "An object that indicates the operational status of
                   the group.

                   A status of notPresent(4) indicates that the group is
                   temporarily or permanently physically and/or
                   logically not a part of the repeater.  It is an
                   implementation-specific matter as to whether the
                   agent effectively removes notPresent entries from the
                   table.

                   A status of operational(2) indicates that the group
                   is functioning, and a status of malfunctioning(3)
                   indicates that the group is malfunctioning in some
                   way."
           ::= { icfVgBasicGroupEntry 4 }

       icfVgGroupLastOperStatusChange OBJECT-TYPE
           SYNTAX     TimeStamp
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "An object that contains the value of sysUpTime at
                   the time that the value of the icfVgGroupOperStatus
                   object for this group last changed.

                   A value of zero indicates that the group's
                   operational status has not changed since the agent
                   last restarted."
           ::= { icfVgBasicGroupEntry 5 }

       icfVgGroupPortCapacity OBJECT-TYPE
           SYNTAX     Integer32 (1..1024)
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The icfVgGroupPortCapacity is the number of ports
                   that can be contained within the group.  Valid range
                   is 1-1024.  Within each group, the ports are uniquely
                   numbered in the range from 1 to
                   icfVgGroupPortCapacity.  Some ports may not be
                   present in a given group instance, in which case the
                   actual number of ports present is less than
                   icfVgGroupPortCapacity.  The number of ports present
                   is never greater than icfVgGroupPortCapacity."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.4.1, aGroupPortCapacity."
           ::= { icfVgBasicGroupEntry 6 }

       icfVgGroupCablesBundled OBJECT-TYPE
           SYNTAX     INTEGER {
                          someCablesBundled(1),
                          noCablesBundled(2)
                      }
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "This configuration flag is used to select either
                   bundled or unbundled cabling.  When this flag is
                   'someCablesBundled(1)' and the port is not
                   promiscuous or cascaded, frames received from ports
                   on this group and destined to go out multiple ports
                   on this group will be buffered completely before
                   being repeated out ports on this group.  When this
                   flag is 'noCablesBundled(2)' or the port is
                   promiscuous or cascaded, these frames will be
                   repeated out ports on this group as the frame is
                   being received.

                   Note that the value 'someCablesBundled(1)' will work
                   in the vast majority of installations, regardless of
                   whether or not any cables are physically in a bundle,
                   since promiscuous and cascaded ports automatically
                   avoid the store and forward.  The main situation in
                   which 'noCablesBundled(2)' is beneficial is when
                   there is a large amount of multicast traffic and the
                   cables are not in a bundle.  The value of this
                   object should be preserved across repeater resets
                   and power failures."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.4.1, aGroupCablesBundled."
           ::= { icfVgBasicGroupEntry 7 }

       icfVgBasicPort     OBJECT IDENTIFIER ::= { icfVgBasic 3 }

       icfVgBasicPortTable OBJECT-TYPE
           SYNTAX     SEQUENCE OF IcfVgBasicPortEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "A table containing information about ports."
           ::= { icfVgBasicPort 1 }

       icfVgBasicPortEntry OBJECT-TYPE
           SYNTAX     IcfVgBasicPortEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "An entry in the icfVgBasicPortTable, containing
                   information about a single port."
           INDEX      { icfVgPortGroupIndex, icfVgPortIndex }
           ::= { icfVgBasicPortTable 1 }

       IcfVgBasicPortEntry ::=
           SEQUENCE {
               icfVgPortGroupIndex             Integer32,
               icfVgPortIndex                  Integer32,
               icfVgPortType                   INTEGER,
               icfVgPortAdminStatus            INTEGER,
               icfVgPortStatus                 INTEGER,
               icfVgPortSupportedPromiscMode   INTEGER,
               icfVgPortSupportedCascadeMode   INTEGER,
               icfVgPortAllowedTrainType       INTEGER,
               icfVgPortLastTrainConfig        OCTET STRING,
               icfVgPortTrainingResult         OCTET STRING,
               icfVgPortPriorityEnable         TruthValue,
               icfVgPortMediaType              INTEGER
           }

       icfVgPortGroupIndex OBJECT-TYPE
           SYNTAX     Integer32 (1..1024)
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "This object identifies the group containing the port
                   for which this entry contains information."
           ::= { icfVgBasicPortEntry 1 }

       icfVgPortIndex OBJECT-TYPE
           SYNTAX     Integer32 (1..1024)
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "This object identifies the port within the group for
                   which this entry contains information.  This value
                   can never be greater than icfVgGroupPortCapacity for
                   the associated group."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aPortID."
           ::= { icfVgBasicPortEntry 2 }

       icfVgPortType OBJECT-TYPE
           SYNTAX     INTEGER {
                          cascadeExternal(1),
                          cascadeInternal(2),
                          localExternal(3),
                          localInternal(4)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "Describes the type of port.  One of the following:

                       cascadeExternal - Port is an uplink with physical
                                         connections which are 
                                         externally visible
                       cascadeInternal - Port is an uplink with physical
                                         connections which are not
                                         externally visible, such as a
                                         connection to an internal
                                         backplane in a chassis
                       localExternal   - Port is a downlink or local
                                         port with externally visible
                                         connections
                       localInternal   - Port is a downlink or local
                                         port with connections which are
                                         not externally visible, such as
                                         a connection to an internal
                                         agent

                   'internal' is used to identify ports which place
                   traffic into the repeater, but do not have any
                   external connections.  Note that both DTE and
                   cascaded repeater downlinks are considered 'local'
                   ports."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aPortType."
           ::= { icfVgBasicPortEntry 3 }

       icfVgPortAdminStatus OBJECT-TYPE
           SYNTAX     INTEGER {
                          enabled(1),
                          disabled(2)
                      }
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "Port enable/disable function.  Enabling a disabled
                   port will cause training to be initiated.  Setting
                   this object to disabled(2) disables the port.  A
                   disabled port neither transmits nor receives.  Once
                   disabled, a port must be explicitly enabled to
                   restore operation.  A port which is disabled when
                   power is lost or when a reset is exerted shall remain
                   disabled when normal operation resumes."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aPortAdministrativeState."
           ::= { icfVgBasicPortEntry 4 }

       icfVgPortStatus OBJECT-TYPE
           SYNTAX     INTEGER {
                          active(1),
                          inactive(2),
                          training(3)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "Current status for the port as specified by the
                   PORT_META_STATE in the port process module of clause
                   12 [IEEE Draft Std 802.12].

                   During initialization or any link warning conditions,
                   icfVgPortStatus will be 'inactive(2)'.

                   When Training_Up is received by the repeater on a
                   local port (or when Training_Down is received on
                   a cascade port), icfVgPortStatus will change to
                   'training(3)' and icfVgTrainingResult can be
                   monitored to see the detailed status regarding
                   training.

                   When 24 consecutive good FCS packets are received and
                   the configuration bits are OK, icfVgPortStatus will
                   change to 'active(1)'.

                   A disabled port shall have a port status of
                   'inactive(2)'."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aPortStatus."
           ::= { icfVgBasicPortEntry 5 }

       icfVgPortSupportedPromiscMode OBJECT-TYPE
           SYNTAX     INTEGER {
                          singleModeOnly(1),
                          singleOrPromiscMode(2),
                          promiscModeOnly(3)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object describes whether the port hardware is
                   capable of supporting promiscuous mode, single
                   address mode (i.e., repeater filters unicasts not
                   addressed to the end station attached to this port),
                   or both.  A port for which icfVgPortType is equal to
                   'cascadeInternal' or 'cascadeExternal' will always
                   have a value of 'promiscModeOnly' for this object."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aSupportedPromiscMode."
           ::= { icfVgBasicPortEntry 6 }

       icfVgPortSupportedCascadeMode OBJECT-TYPE
           SYNTAX     INTEGER {
                          endNodesOnly(1),
                          endNodesOrRepeaters(2),
                          cascadePort(3)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object describes whether the port hardware is
                   capable of supporting cascaded repeaters, end nodes,
                   or both.  A port for which icfVgPortType is equal to
                   'cascadeInternal' or 'cascadeExternal' will always
                   have a value of 'cascadePort' for this object."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aSupportedCascadeMode."
           ::= { icfVgBasicPortEntry 7 }

       icfVgPortAllowedTrainType OBJECT-TYPE
           SYNTAX     INTEGER {
                          allowEndNodesOnly(1),
                          allowPromiscuousEndNodes(2),
                          allowEndNodesOrRepeaters(3),
                          allowAnything(4)
                      }
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "This security object is set by the network manager
                   to configure what type of device is permitted to
                   connect to the port.  One of the following values:

                       allowEndNodesOnly        - only non-promiscuous
                                                  end nodes permitted.
                       allowPromiscuousEndNodes - promiscuous or non-
                                                  promiscuous end nodes
                                                  permitted
                       allowEndNodesOrRepeaters - repeaters or non-
                                                  promiscuous end nodes
                                                  permitted
                       allowAnything            - repeaters, promiscuous
                                                  or non-promiscuous end
                                                  nodes permitted

                   For a port for which icfVgPortType is equal to
                   'cascadeInternal' or 'cascadeExternal', the
                   corresponding instance of this object may not be set
                   to 'allowEndNodesOnly' or 'allowPromiscuousEndNodes'.

                   The agent must reject a SET of this object if the
                   value includes no capabilities that are supported by
                   this port's hardware, as defined by the values of the
                   corresponding instances of
                   icfVgPortSupportedPromiscMode and
                   icfVgPortSupportedCascadeMode."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aAllowableTrainingType."
           ::= { icfVgBasicPortEntry 8 }

       icfVgPortLastTrainConfig OBJECT-TYPE
           SYNTAX     OCTET STRING (SIZE(2))
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This 16 bit field contains the most recent training
                   configuration in an error-free training frame
                   sent by the end node connected to the port.  For
                   cascade ports, this is the responder's configuration
                   field from the most recent error-free training
                   response frame received in response to training
                   initiated by this repeater.  This object is formatted
                   as follows:

                       First Octet:       Second Octet:

                        7 6 5 4 3 2 1 0    7 6 5 4 3 2 1 0
                       +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+
                       |v|v|v|0|0|0|0|0|  |0|0|0|F|F|P|P|R|
                       +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+

                       vvv: The version of the 802.12 training protocol
                            with which the training initiator is
                            compliant
                       FF:  00 = frameType88023 is requested
                            01 = frameType88025 is requested
                            10 = reserved
                            11 = either frameType88023 or frameType88025
                                 is acceptable
                       PP:  00 = request singleAddressMode
                            01 = request promiscuousMode
                            10 = reserved
                            11 = reserved
                       R:   0  = request is from an end node
                            1  = request is from a repeater"
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aLastTrainingConfig."
           ::= { icfVgBasicPortEntry 9 }

       icfVgPortTrainingResult OBJECT-TYPE
           SYNTAX     OCTET STRING (SIZE(3))
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This 18 bit field is used to indicate the result of
                   training.  It contains two bits which indicate if
                   error-free training frames have been received, and it
                   also contains the 16 bits of the most recent valid
                   training response frame on the port.

                 First Octet:       Second Octet:      Third Octet:

                  7 6 5 4 3 2 1 0    7 6 5 4 3 2 1 0    7 6 5 4 3 2 1 0
                 +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+
                 |0|0|0|0|0|0|V|G|  |v|v|v|D|C|N|0|0|  |0|0|0|F|F|P|P|R|
                 +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+

                       V:   Valid: set when at least one error-free
                            training frame has been received.  Indicates
                            the 16 training configuration bits in
                            icfVgPortLastTrainConfig and
                            icfVgPortTrainingResult contain valid
                            information.  This bit is cleared when
                            icfVgPortStatus transitions to the 
                            'inactive' or 'training' state.
                       G:   LinkGood: indicates the link hardware is OK.
                            Set if 24 consecutive error-free training
                            packets have been received.  Cleared when a
                            training packet with errors is received, and
                            when icfVgPortStatus transitions to the
                            'inactive' or 'training' state.
                       vvv: The version of the 802.12 training protocol
                            with which the training responder is
                            compliant
                       D:   0  = no duplicate address has been detected
                            1  = duplicate address has been detected
                       C:   0  = the requested configuration is
                                 compatible with the port
                            1  = the requested configuration is not
                                 compatible with the port.  The FF, PP
                                 and R bits indicate the configuration
                                 which would be allowed (providing 
                                 N = 0).
                       N:   0  = access will be allowed, providing the
                                 configuration is compatible (C = 0).
                            1  = access not allowed because of security
                                 restrictions
                       FF:  00 = frameType88023 will be used
                            01 = frameType88025 will be used
                            10 = reserved
                            11 = reserved
                       PP:  00 = singleAddressMode will be used
                            01 = promiscuousMode will be used
                            10 = reserved
                            11 = reserved
                       R:   0  = requested access as an end node is
                                 allowed
                            1  = requested access as a repeater is
                                 allowed

                   If the port is in training, a management station can
                   examine this object to see if any training packets
                   have been passed successfully.  If there have been
                   any good training packets, the Valid bit will be set
                   and the management station can examine the 16
                   training response bits to see if there is a duplicate
                   address, configuration, or security problem.

                   Note that on a repeater local port, this repeater
                   generates the training response bits, while on the
                   cascade port, the higher level repeater originated
                   the training response bits."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aTrainingResult."
           ::= { icfVgBasicPortEntry 10 }

       icfVgPortPriorityEnable OBJECT-TYPE
           SYNTAX     TruthValue
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "A configuration flag used to determine whether the
                   repeater will service high priority requests received
                   on the port as high priority or normal priority.
                   When 'false', high priority requests on this port
                   will be serviced as normal priority.  The value of
                   this object should be preserved across repeater
                   resets and power failures.  The setting of this
                   object has no effect on a cascade port."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aPriorityEnable."
           ::= { icfVgBasicPortEntry 11 }

       icfVgPortMediaType OBJECT-TYPE
           SYNTAX     INTEGER {
                          other(1),
                          unknown(2),
                          pmdMissing(3),
                          utp4(4),
                          stp2(5),
                          fibre(6)
                      }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The type of physical media in use.  One of the
                   following values:

                          other       undefined
                          unknown     true state not known
                          pmdMissing  PMD device not attached
                          utp4        4-pair unshielded twisted pair
                          stp2        2-pair shielded twisted pair
                          fibre       802.12 fibre optic cabling

                   This object may be 'unknown' if the implementation is
                   not capable of identifying the PMD media type, or
                   whether or not the PMD is even present."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aMediaType."
           ::= { icfVgBasicPortEntry 12 }

       icfVgMonitor       OBJECT IDENTIFIER ::= { icfVgRepeater 2 }

       icfVgMonRptr       OBJECT IDENTIFIER ::= { icfVgMonitor 1 }
       -- Currently unused

       icfVgMonGroup      OBJECT IDENTIFIER ::= { icfVgMonitor 2 }
       -- Currently unused

       icfVgMonPort       OBJECT IDENTIFIER ::= { icfVgMonitor 3 }

       icfVgMonPortTable OBJECT-TYPE
           SYNTAX     SEQUENCE OF IcfVgMonPortEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "A table of performance and error statistics for the
                   ports."
           ::= { icfVgMonPort 1 }

       icfVgMonPortEntry OBJECT-TYPE
           SYNTAX     IcfVgMonPortEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "An entry in the icfVgMonPortTable, containing
                   performance and error statistics for a single port."
           INDEX      { icfVgPortGroupIndex, icfVgPortIndex }
           ::= { icfVgMonPortTable 1 }


       IcfVgMonPortEntry ::=
           SEQUENCE {
               icfVgPortReadableFrames         Counter32,
               icfVgPortReadableOctets         Counter32,
               icfVgPortUnreadableOctets       Counter32,
               icfVgPortHighPriorityFrames     Counter32,
               icfVgPortHighPriorityOctets     Counter32,
               icfVgPortBroadcastFrames        Counter32,
               icfVgPortMulticastFrames        Counter32,
               icfVgPortIPMFrames              Counter32,
               icfVgPortDataErrorFrames        Counter32,
               icfVgPortPriorityPromotions     Counter32,
               icfVgPortHCReadableOctets       Counter64,
               icfVgPortHCUnreadableOctets     Counter64,
               icfVgPortHCHighPriorityOctets   Counter64,
               icfVgPortHCNormPriorityOctets   Counter64,
               icfVgPortNormPriorityFrames     Counter32,
               icfVgPortNormPriorityOctets     Counter32,
               icfVgPortNullAddressedFrames    Counter32,
               icfVgPortOversizeFrames         Counter32,
               icfVgPortTransitionToTrainings  Counter32

           }

       icfVgPortReadableFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is the number of good frames of valid
                   frame length that have been received on this port.
                   This counter is incremented by one for each frame
                   received on the port which is not counted by
                   icfVgPortIPMFrames or icfVgPortDataErrorFrames."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aReadableFramesReceived."
           ::= { icfVgMonPortEntry 1 }

       icfVgPortReadableOctets OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in good frames that have been received on
                   this port.  This counter is incremented by OctetCount
                   for each frame received on this port which has been
                   determined to be a readable frame (i.e. each frame
                   counted by icfVgPortReadableFrames).

                   Note that this counter will roll over very quickly.
                   It is provided for backward compatibility for Network
                   Management protocols that do not support 64 bit
                   counters (e.g. SNMP version 1)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aReadableOctetsReceived."
           ::= { icfVgMonPortEntry 2 }

       icfVgPortUnreadableOctets OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in invalid frames that have been received
                   on this port.  This counter is incremented by
                   OctetCount for each frame received on this port which
                   is counted by icfVgPortIPMFrames or
                   icfVgPortDataErrorFrames.  This counter can be
                   combined with icfVgPortReadableOctets to calculate
                   network utilization.

                   Note that this counter will roll over very quickly.
                   It is provided for backward compatibility for Network
                   Management protocols that do not support 64 bit
                   counters (e.g. SNMP version 1)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aOctetsInUnreadableFramesRcvd."
           ::= { icfVgMonPortEntry 3 }

       icfVgPortHighPriorityFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of high priority frames
                   that have been received on this port.  This counter
                   is incremented by one for each high priority frame
                   received on this port, including readable, invalid,
                   and training frames.  This counter does not include
                   normal priority frames which were priority promoted."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aHighPriorityFramesReceived."
           ::= { icfVgMonPortEntry 4 }

       icfVgPortHighPriorityOctets OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in high priority frames that have been
                   received on this port.  This counter is incremented
                   by OctetCount for each frame received on this port
                   which is counted by icfVgPortHighPriorityFrames.

                   Note that this counter will roll over very quickly.
                   It is provided for backward compatibility for Network
                   Management protocols that do not support 64 bit
                   counters (e.g. SNMP version 1)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aHighPriorityOctetsReceived."
           ::= { icfVgMonPortEntry 5 }

       icfVgPortBroadcastFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of broadcast packets that
                   have been received on this port.  This counter is
                   incremented by one for each readable frame received
                   on this port whose destination MAC address is the
                   broadcast address.  Frames counted by this counter
                   are also counted by icfVgPortReadableFrames."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aBroadcastFramesReceived."
           ::= { icfVgMonPortEntry 6 }

       icfVgPortMulticastFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of multicast packets that
                   have been received on this port.  This counter is
                   incremented by one for each readable frame received
                   on this port whose destination MAC address has the
                   group address bit set, but is not the broadcast
                   address.  Frames counted by this counter are also
                   counted by icfVgPortReadableFrames, but not by
                   icfVgPortBroadcastFrames"
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aMulticastFramesReceived."
           ::= { icfVgMonPortEntry 7 }

       icfVgPortIPMFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of frames that
                   have been received on this port with an invalid
                   packet marker and no PMI errors.  A repeater will
                   write an invalid packet marker to the end of a frame
                   containing errors as it is forwarded through the
                   repeater to the other ports.  This counter is
                   incremented by one for each frame received on this
                   port which has had an invalid packet marker added to
                   the end of the frame.  This counter indicates
                   problems with remote cable segments, as opposed to
                   problems with cables directly attached to this
                   repeater."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aIPMFramesReceived."
           ::= { icfVgMonPortEntry 8 }

       icfVgPortDataErrorFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of errored frames received on
                   this port.  This counter is incremented by one for
                   each frame received on this port with any of the
                   following errors: bad FCS (with no IPM), PMI errors
                   (excluding frames with an IPM error as the only PMI
                   error), or undersize (with no IPM).  Does not include
                   packets counted by icfVgPortIPMFrames,
                   icfVgPortOversizeFrames, or
                   icfVgPortNullAddressedFrames.

                   This counter indicates problems with the cable
                   directly attached to this repeater, while
                   icfVgPortIPMFrames indicates problems with remote
                   cables attached to other repeaters."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aDataErrorFramesReceived."
           ::= { icfVgMonPortEntry 9 }

       icfVgPortPriorityPromotions OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This counter is incremented by one each time the
                   priority promotion timer has expired on this port and
                   a normal priority frame was priority promoted."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aPriorityPromotions."
           ::= { icfVgMonPortEntry 10 }

       icfVgPortHCReadableOctets OBJECT-TYPE
           SYNTAX     Counter64
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in good frames that have been received on
                   this port.  This counter is incremented by OctetCount
                   for each frame received on this port which has been
                   determined to be a readable frame (i.e. each frame
                   counted by icfVgPortReadableFrames).

                   This counter is a 64 bit version of
                   icfVgPortReadableOctets.  It should be used by
                   Network Management protocols which support 64 bit
                   counters (e.g. SNMPv2)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aReadableOctetsReceived."
           ::= { icfVgMonPortEntry 11 }

       icfVgPortHCUnreadableOctets OBJECT-TYPE
           SYNTAX     Counter64
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in invalid frames that have been received
                   on this port.  This counter is incremented by
                   OctetCount for each frame received on this port which
                   is counted by icfVgPortIPMFrames or
                   icfVgPortDataErrorFrames.  This counter can be
                   combined with icfVgPortHCReadableOctets to calculate
                   network utilization.

                   This counter is a 64 bit version of
                   icfVgPortUnReadableOctets.  It should be used by
                   Network Management protocols which support 64 bit
                   counters (e.g. SNMPv2)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aOctetsInUnreadableFramesRcvd."
           ::= { icfVgMonPortEntry 12 }

       icfVgPortHCHighPriorityOctets OBJECT-TYPE
           SYNTAX     Counter64
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in high priority frames that have been
                   received on this port.  This counter is incremented
                   by OctetCount for each frame received on this port
                   which is counted by icfVgPortHighPriorityFrames.

                   This counter is a 64 bit version of
                   icfVgPortHighPriorityOctets.  It should be used by
                   Network Management protocols which support 64 bit
                   counters (e.g. SNMPv2)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aHighPriorityOctetsReceived."
           ::= { icfVgMonPortEntry 13 }

       icfVgPortHCNormPriorityOctets OBJECT-TYPE
           SYNTAX     Counter64
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in normal  priority frames that have been
                   received on this port.  This counter is incremented
                   by OctetCount for each frame received on this port
                   which is counted by icfVgPortNormPriorityFrames.

                   This counter is a 64 bit version of
                   icfVgPortNormPriorityOctets.  It should be used by
                   Network Management protocols which support 64 bit
                   counters (e.g. SNMPv2)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aNormalPriorityOctetsReceived."
           ::= { icfVgMonPortEntry 14 }

       icfVgPortNormPriorityFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of normal priority frames
                   that have been received on this port.  This counter
                   is incremented by one for each normal priority frame
                   received on this port. This counter includes both
                   good and bad normal priority frames, as well as
                   normal priority training frames and normal priority
                   frames which were priority promoted."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aNormalPriorityFramesReceived."
           ::= { icfVgMonPortEntry 15 }

       icfVgPortNormPriorityOctets OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of the number of octets
                   contained in normal priority frames that have been
                   received on this port.  This counter is incremented
                   by OctetCount for each frame received on this port
                   which is counted by icfVgPortNormPriorityFrames.

                   Note that this counter will roll over very quickly.
                   It is provided for backward compatibility for Network
                   Management protocols that do not support 64 bit
                   counters (e.g. SNMP version 1)."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aNormalPriorityOctetsReceived."
           ::= { icfVgMonPortEntry 16 }

       icfVgPortNullAddressedFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of null addressed packets
                   that have been received on this port.  This counter
                   is incremented by one for each frame received on this
                   port with a destination MAC address consisting of all
                   zero bits.  Both void and training frames are
                   included in this counter."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aNullAddressedFramesReceived."
           ::= { icfVgMonPortEntry 17 }

       icfVgPortOversizeFrames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is a count of oversize frames received
                   on this port.  This counter is incremented by one for
                   each frame received on this port whose OctetCount is
                   larger than the maximum legal frame size.

                   The frame size which causes this counter to increment
                   is dependent on the current value of
                   icfVgCurrentFramingType.  When
                   icfVgCurrentFramingType is equal to frameType88023
                   this counter will increment for frames that are 1519
                   octets or larger.  When icfVgCurrentFramingType is
                   equal to frameType88025 this counter will increment
                   for frames that are 4521 octets or larger."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aOversizeFramesReceived."
           ::= { icfVgMonPortEntry 18 }

       icfVgPortTransitionToTrainings OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This counter is incremented by one each time the
                   icfVgPortStatus object for this port transitions into
                   the 'training' state."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aTransitionsIntoTraining."
           ::= { icfVgMonPortEntry 19 }

       icfVgAddrTrack      OBJECT IDENTIFIER ::= { icfVgRepeater 3 }

       icfVgAddrTrackRptr  OBJECT IDENTIFIER ::= { icfVgAddrTrack 1 }
       -- Currently unused

       icfVgAddrTrackGroup OBJECT IDENTIFIER ::= { icfVgAddrTrack 2 }
       -- Currently unused

       icfVgAddrTrackPort  OBJECT IDENTIFIER ::= { icfVgAddrTrack 3 }

       icfVgAddrTrackTable OBJECT-TYPE
           SYNTAX     SEQUENCE OF IcfVgAddrTrackEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
               "Table of address mapping information about the
               ports."
           ::= { icfVgAddrTrackPort 1 }

       icfVgAddrTrackEntry OBJECT-TYPE
           SYNTAX     IcfVgAddrTrackEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
               "An entry in the table, containing address mapping
               information about a single port."
           INDEX      { icfVgPortGroupIndex, icfVgPortIndex }
           ::= { icfVgAddrTrackTable 1 }

       IcfVgAddrTrackEntry ::=
           SEQUENCE {
               icfVgAddrLastTrainedAddress     OCTET STRING,
               icfVgAddrTrainedAddrChanges     Counter32,
               icfVgRptrDetectedDupAddress     TruthValue,
               icfVgMgrDetectedDupAddress      TruthValue
           }

       icfVgAddrLastTrainedAddress OBJECT-TYPE
           SYNTAX     OCTET STRING (SIZE(0 | 6))
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is the MAC address of the last station
                   which succeeded in training on this port.  A
                   cascaded repeater may train using the null address.
                   If no stations have succeeded in training on this
                   port since the agent began monitoring the port
                   activity, the agent shall return a string of length
                   zero."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aLastTrainedAddress."
           ::= { icfVgAddrTrackEntry 1 }

       icfVgAddrTrainedAddrChanges OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This counter is incremented by one for each time
                   that the icfVgAddrLastTrainedAddress object for this
                   port has changed."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aTrainedAddressChanges."
           ::= { icfVgAddrTrackEntry 2 }

       icfVgRptrDetectedDupAddress OBJECT-TYPE
           SYNTAX     TruthValue
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "This object is used to indicate that the repeater
                   detected an error-free training frame on this port
                   with a source MAC address which matches the value of
                   icfVgAddrLastTrainedAddress of another active port.
                   This is reset to 'false' when an error-free training
                   frame is received with a source MAC address which
                   does not match icfVgAddrLastTrainedAddress of another
                   port which is active.  For the cascade port, this
                   object will be 'true' if the 'D' bit in the most
                   recently received error-free training response frame
                   was set."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aLocalRptrDetectedDupAddr."
           ::= { icfVgAddrTrackEntry 3 }

       icfVgMgrDetectedDupAddress OBJECT-TYPE
           SYNTAX     TruthValue
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "This object can be set by a management station when
                   it detects that there is a duplicate MAC address.
                   This object is OR'd with icfVgRptrDetectedDupAddress
                   to form the value of the 'D' bit in training response
                   frames on this port.

                   The purpose of this object is to provide a means for
                   network management software to inform an end station
                   that it is using a duplicate station address.
                   Setting this object does not affect the current state
                   of the link; the end station will not be informed of
                   the duplicate address until it retrains for some
                   reason.  Note that regardless of its station address,
                   the end station will not be able to train
                   successfully until the network management software
                   has set this object back to 'false'.  Although this
                   object exists on cascade ports, it does not perform
                   any function since this repeater is the initiator of
                   training on a cascade port."
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.5.1, aCentralMgmtDetectedDupAddr."
           ::= { icfVgAddrTrackEntry 4 }



       icfVgRptrTraps       OBJECT IDENTIFIER ::= { icfVgRepeater 4 }
       icfVgRptrTrapsPrefix OBJECT IDENTIFIER ::= { icfVgRptrTraps 0 }

       icfVgRptrHealth NOTIFICATION-TYPE
           OBJECTS     { icfVgRepeaterHealthState }
           STATUS      current
           DESCRIPTION
                   "A icfVgRptrHealth trap conveys information related
                   to the operational state of the repeater.  This trap
                   is sent either when the value of
                   icfVgRepeaterHealthState changes, or upon completion
                   of a non-disruptive test.  The icfVgRptrHealth trap
                   is not sent as a result of powering up a repeater.

                   The icfVgRptrHealth trap must contain the
                   icfVgRepeaterHealthState object.  The agent may
                   optionally include the icfVgRepeaterHealthText object
                   in the varBind list.  See the
                   icfVgRepeaterHealthState and icfVgRepeaterHealthText
                   objects for descriptions of the information that is
                   sent.

                   The agent must throttle the generation of consecutive
                   icfVgRptrHealth traps so that there is at least a
                   five-second gap between traps of this type.  When
                   traps are throttled, they are dropped, not queued for
                   sending at a future time.  (Note that 'generating' a
                   trap means sending to all configured recipients.)"
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.3, nRepeaterHealth."
           ::= { icfVgRptrTrapsPrefix 1 }

       icfVgRptrResetEvent NOTIFICATION-TYPE
           OBJECTS        { icfVgRepeaterHealthState }
           STATUS         current
           DESCRIPTION
                   "An icfVgRptrResetEvent trap conveys information
                   related to the operational state of the repeater.
                   This trap is sent on completion of a repeater reset
                   action.  A repeater reset action is defined as a
                   transition to its initial state as specified in
                   clause 12 [IEEE Draft Std 802.12] when triggered by a
                   management command.

                   The icfVgRptrResetEvent trap is not sent when the
                   agent restarts and sends an SNMP coldStart or
                   warmStart trap.  However, it is recommended that an
                   802.12 repeater agent send the
                   icfVgRepeaterHealthState object as an optional object
                   with its coldStart and warmStart trap PDUs.

                   The icfVgRptrResetEvent trap must contain the
                   icfVgRepeaterHealthState object.  The agent may
                   optionally include the icfVgRepeaterHealthText object
                   in the varBind list.  See the
                   icfVgRepeaterHealthState and icfVgRepeaterHealthText
                   objects for descriptions of the information that is
                   sent.

                   The agent must throttle the generation of consecutive
                   icfVgRptrResetEvent traps so that there is at least a
                   five-second gap between traps of this type.  When
                   traps are throttled, they are dropped, not queued for
                   sending at a future time.  (Note that 'generating' a
                   trap means sending to all configured recipients.)"
           REFERENCE
                   "IEEE Draft Std. 802.12, Draft 6, 23 November, 1994,
                   13.2.4.2.3, nRepeaterReset."
           ::= { icfVgRptrTrapsPrefix 3 }


       -- conformance information

       icfVgRepeaterConformance
           OBJECT IDENTIFIER ::= { icfVgRepeaterMib 1 }

       icfVgRepeaterCompliances
           OBJECT IDENTIFIER ::= { icfVgRepeaterConformance 1 }
       icfVgRepeaterGroups
           OBJECT IDENTIFIER ::= { icfVgRepeaterConformance 2 }


       -- Compliance statements

       icfVgRptrPreStdCompliance MODULE-COMPLIANCE
           STATUS     obsolete
           DESCRIPTION
                   "********* THIS COMPLIANCE IS OBSOLETE *********

                   The compliance statement for pre-standard 802.12
                   repeater management."
           MODULE
               MANDATORY-GROUPS { icfVgRptrBasicGroup,
                                  icfVgRptrPreStdMonitorGroup,
                                  icfVgRptrPreStdAddrTrackGroup,
                                  icfVgRptrNotificationsGroup }

           ::= { icfVgRepeaterCompliances 1 }

       icfVgRptrCompliance MODULE-COMPLIANCE
           STATUS     current
           DESCRIPTION
                   "The compliance statement for 802.12 repeater
                   management."
           MODULE
               MANDATORY-GROUPS { icfVgRptrBasicGroup,
                                  icfVgRptrMonitorGroup,
                                  icfVgRptrAddrTrackGroup,
                                  icfVgRptrNotificationsGroup }

           ::= { icfVgRepeaterCompliances 2 }


       -- Units of conformance

       icfVgRptrBasicGroup OBJECT-GROUP
           OBJECTS    { icfVgMACAddress,
                        icfVgCurrentFramingType,
                        icfVgDesiredFramingType,
                        icfVgFramingCapability,
                        icfVgTrainingVersion,
                        icfVgRepeaterGroupCapacity,
                        icfVgRepeaterHealthState,
                        icfVgRepeaterHealthText,
                        icfVgRepeaterReset,
                        icfVgRepeaterNonDisruptTest,
                        icfVgGroupDescr,
                        icfVgGroupObjectID,
                        icfVgGroupOperStatus,
                        icfVgGroupLastOperStatusChange,
                        icfVgGroupPortCapacity,
                        icfVgGroupCablesBundled,
                        icfVgPortType,
                        icfVgPortAdminStatus,
                        icfVgPortStatus,
                        icfVgPortSupportedPromiscMode,
                        icfVgPortSupportedCascadeMode,
                        icfVgPortAllowedTrainType,
                        icfVgPortLastTrainConfig,
                        icfVgPortTrainingResult,
                        icfVgPortPriorityEnable,
                        icfVgPortMediaType
                      }
           STATUS     current
           DESCRIPTION
                   "A collection of objects for managing the status
                   and configuration of IEEE 802.12 repeaters."
           ::= { icfVgRepeaterGroups 1 }

       icfVgRptrPreStdMonitorGroup OBJECT-GROUP
           OBJECTS    { icfVgPortReadableFrames,
                        icfVgPortReadableOctets,
                        icfVgPortUnreadableOctets,
                        icfVgPortHighPriorityFrames,
                        icfVgPortHighPriorityOctets,
                        icfVgPortBroadcastFrames,
                        icfVgPortMulticastFrames,
                        icfVgPortIPMFrames,
                        icfVgPortDataErrorFrames,
                        icfVgPortPriorityPromotions,
                        icfVgPortHCReadableOctets,
                        icfVgPortHCUnreadableOctets,
                        icfVgPortHCHighPriorityOctets
                      }
           STATUS     obsolete
           DESCRIPTION
                   "********* THIS GROUP IS OBSOLETE *********

                   A collection of objects for providing statistics
                   for pre-standard IEEE 802.12 repeaters."
           ::= { icfVgRepeaterGroups 2 }

       icfVgRptrPreStdAddrTrackGroup OBJECT-GROUP
           OBJECTS    { icfVgAddrLastTrainedAddress,
                        icfVgAddrTrainedAddrChanges
                      }
           STATUS     obsolete
           DESCRIPTION
                   "********* THIS GROUP IS OBSOLETE *********

                   A collection of objects for tracking addresses
                   on pre-standard IEEE 802.12 repeaters."
           ::= { icfVgRepeaterGroups 3 }

       icfVgRptrMonitorGroup OBJECT-GROUP
           OBJECTS    { icfVgPortReadableFrames,
                        icfVgPortReadableOctets,
                        icfVgPortUnreadableOctets,
                        icfVgPortHighPriorityFrames,
                        icfVgPortHighPriorityOctets,
                        icfVgPortBroadcastFrames,
                        icfVgPortMulticastFrames,
                        icfVgPortIPMFrames,
                        icfVgPortDataErrorFrames,
                        icfVgPortPriorityPromotions,
                        icfVgPortHCReadableOctets,
                        icfVgPortHCUnreadableOctets,
                        icfVgPortHCHighPriorityOctets,
                        icfVgPortHCNormPriorityOctets,
                        icfVgPortNormPriorityFrames,
                        icfVgPortNormPriorityOctets,
                        icfVgPortNullAddressedFrames,
                        icfVgPortOversizeFrames,
                        icfVgPortTransitionToTrainings
                      }
           STATUS     current
           DESCRIPTION
                   "A collection of objects for providing statistics
                   for IEEE 802.12 repeaters."
           ::= { icfVgRepeaterGroups 4 }

       icfVgRptrAddrTrackGroup OBJECT-GROUP
           OBJECTS    { icfVgAddrLastTrainedAddress,
                        icfVgAddrTrainedAddrChanges,
                        icfVgRptrDetectedDupAddress,
                        icfVgMgrDetectedDupAddress
                      }
           STATUS     current
           DESCRIPTION
                   "A collection of objects for tracking addresses
                   on IEEE 802.12 repeaters."
           ::= { icfVgRepeaterGroups 5 }

       icfVgRptrNotificationsGroup NOTIFICATION-GROUP
           NOTIFICATIONS { icfVgRptrHealth,
                           icfVgRptrResetEvent
                         }
           STATUS     current
           DESCRIPTION
                   "A collection of notifications used to indicate
                   802.12 repeater general status changes."
           ::= { icfVgRepeaterGroups 6 }

       END