path: root/MIBS/ibm/IBMACCOUNTING-MIB

IBMACCOUNTING-MIB DEFINITIONS ::= BEGIN

--IMPORTS
--      MODULE-IDENTITY, enterprises, Integer32, Counter32,
--      Gauge32, TimeTicks, OBJECT-TYPE
--            FROM SNMPv2-SMI
--     OBJECT-GROUP, MODULE-COMPLIANCE
--            FROM SNMPv2-CONF
--      DisplayString
--            FROM SNMPv2-TC;

IMPORTS
      enterprises, Gauge, Counter, TimeTicks
            FROM RFC1155-SMI
      OBJECT-TYPE
            FROM RFC-1212
      DisplayString
            FROM RFC1213-MIB;

--ibmappnIsAccounting MODULE-IDENTITY
--      LAST-UPDATED "9610071800Z"
--      ORGANIZATION "IBM"
--      CONTACT-INFO "Bob Moore (remoore @ ralvm6)
--                    IBM Corporation
--                    800 Park Offices Drive
--                    CNMA/664
--                    P.O. Box 12195
--                    Research Triangle Park, NC 27709, USA
--                    Tel:    1 919 254 4436
--                    E-mail: remoore@ralvm6.vnet.ibm.com"
--
--      DESCRIPTION
--          "This MIB module represents the intermediate session accounting
--          group from the original IBM-6611-APPN-MIB, updated to SNMPv2
--          SMI.  It is set up to use as its anchor point the same OID that
--          identified the group in the IBM-6611-APPN MIB, so that existing
--          manager applications will not need to change."
--
--      ::= { ibmappnSessIntermediate 2 }

-- The following OID assignments result in the same OIDs for the
-- objects in the intermediate session accounting group as those
-- in the IBM-6611-APPN-MIB.
ibm                     OBJECT IDENTIFIER ::= { enterprises 2 }
ibmProd                 OBJECT IDENTIFIER ::= { ibm 6 }
ibm6611                 OBJECT IDENTIFIER ::= { ibmProd 2 }
ibmappn                 OBJECT IDENTIFIER ::= { ibm6611 13 }
ibmappnSession          OBJECT IDENTIFIER ::= { ibmappn 7 }
ibmappnSessIntermediate OBJECT IDENTIFIER ::= { ibmappnSession 3 }
ibmappnIsAccounting     OBJECT IDENTIFIER ::= { ibmappnSessIntermediate 2 }


-- *********************************************************************
-- Intermediate Session Accounting Global Objects
-- ---------------------------------------------------------------------
-- The following simple objects allow:
--    * monitoring of the global accounting status
--    * setting of a byte threshold for recording statistics on
--      active sessions
--    * requesting checkpoint records of active sessions to be
--       recorded
--    * setting the manager time and name
-- *********************************************************************
ibmappnIsAcGlobal OBJECT IDENTIFIER ::= { ibmappnIsAccounting 1 }

ibmappnIsAcGlobeStatus OBJECT-TYPE
      SYNTAX INTEGER  {
                      notActive(1),
                      activeNotFull(2),
                      activeButFull(3)
                      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "This object indicates the current status for accounting type.

           1. indicates collection is not active for any media type.
           2. indicates collection is active for at least one media
              type; and that media is not full.
           3. indicates collection is active for at least one media
              type; but all active medias are full."

      ::=  { ibmappnIsAcGlobal 1 }

ibmappnIsAcGlobeByteThresh OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The byte threshold for recording accounting information for an
          active session.

          If the total of the byte counters (FmdBytes and NonFmdBtyes) is
          an even multiple of this non-zero value, statistics for this
          session will be recorded to all active buffers.

          A value of zero indicates that no byte threshold has been set."

      ::=  { ibmappnIsAcGlobal 2 }

ibmappnIsAcGlobeCheckPt OBJECT-TYPE
      SYNTAX INTEGER {
                     ready(1),
                     yes(2)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "By setting this value to yes, the agent will collect
           accounting information for all active sessions.  This
           information will be recorded to all active buffers."

      ::=  { ibmappnIsAcGlobal 3 }

ibmappnIsAcGlobeMgrUtcSecs OBJECT-TYPE
      SYNTAX INTEGER (0..59)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) seconds.  It
          contains an integer from 0 to 59.  By setting this value, the
          agent will create time record with its corresponding time and
          name.  When setting this object, the manager should also set
          all other ibmappnIsAcGlobeMgr objects with the same SET
          operation."

      ::=  { ibmappnIsAcGlobal 4 }

ibmappnIsAcGlobeMgrUtcMins OBJECT-TYPE
      SYNTAX INTEGER (0..59)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) minutes.  It
          contains an integer from 0 to 59.  By setting this value, the
          agent will create time record with its corresponding time and
          name.  When setting this object, the manager should also set
          all other ibmappnIsAcGlobeMgr objects with the same SET
          operation."

      ::=  { ibmappnIsAcGlobal 5 }

ibmappnIsAcGlobeMgrUtcHours OBJECT-TYPE
      SYNTAX INTEGER (0..23)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) hours.  It
          contains an integer from 0 to 23.  By setting this value, the
          agent will create time record with its corresponding time and
          name.  When setting this object, the manager should also set
          all other ibmappnIsAcGlobeMgr objects with the same SET
          operation."

      ::=  { ibmappnIsAcGlobal 6 }

ibmappnIsAcGlobeMgrUtcMdays OBJECT-TYPE
      SYNTAX INTEGER (0..31)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) day of the
          month.  It contains an integer from 1 to 31; or 0 if the
          manager has not set this object.  By setting this value, the
          agent will create time record with its corresponding time and
          name.  When setting this object, the manager should also set
          all other ibmappnIsAcGlobeMgr objects with the same SET
          operation."

      ::=  { ibmappnIsAcGlobal 7 }

ibmappnIsAcGlobeMgrUtcMonths OBJECT-TYPE
      SYNTAX INTEGER {
                     january(0),
                     february(1),
                     march(2),
                     april(3),
                     may(4),
                     june(5),
                     july(6),
                     august(7),
                     september(8),
                     october(9),
                     november(10),
                     december(11)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) months since
          January.  It contains an integer from 0 to 11.  By setting this
          value, the agent will create time record with its corresponding
          time and name.  When setting this object, the manager should
          also set all other ibmappnIsAcGlobeMgr objects with the same
          SET operation."

      ::=  { ibmappnIsAcGlobal 8 }

ibmappnIsAcGlobeMgrUtcYears OBJECT-TYPE
      SYNTAX INTEGER (0..1000)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's number of years since 1900.  For years up
          through 1999, this value is identical to the manager's
          Coordinated Universal Time (UTC) years.  Beginning in the year
          2000, however, this value will be greater than the UTC years
          value by 100 (or more).  By setting this value, the agent will
          create time record with its corresponding time and name.  When
          setting this object, the manager should also set all other
          ibmappnIsAcGlobeMgr objects with the same SET operation."

      ::=  { ibmappnIsAcGlobal 9 }

ibmappnIsAcGlobeMgrUtcWdays OBJECT-TYPE
      SYNTAX INTEGER {
                     sunday(0),
                     monday(1),
                     tuesday(2),
                     wednesday(3),
                     thursday(4),
                     friday(5),
                     saturday(6)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) days since
          Sunday.  It contains an integer from 0 to 6.  By setting this
          value, the agent will create time record with its corresponding
          time and name.  When setting this object, the manager should
          also set all other ibmappnIsAcGlobeMgr objects with the same
          SET operation."

      ::=  { ibmappnIsAcGlobal 10 }

ibmappnIsAcGlobeMgrUtcYdays OBJECT-TYPE
      SYNTAX INTEGER (0..365)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) days since
          January 1.  It contains an integer from 0 to 365.  By setting
          this value, the agent will create time record with its
          corresponding time and name.  When setting this object, the
          manager should also set all other ibmappnIsAcGlobeMgr objects
          with the same SET operation."

      ::=  { ibmappnIsAcGlobal 11 }

ibmappnIsAcGlobeMgrUtcIsdst OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) daylight saving
          time flag.  It is positive if daylight saving time is in
          effect.  It is zero if daylight saving time is not in effect.
          It is negative if the manager does not support the function.
          By setting this value, the agent will create time record with
          its corresponding time and name.  When setting this object, the
          manager should also set all other ibmappnIsAcGlobeMgr objects
          with the same SET operation."

      ::=  { ibmappnIsAcGlobal 12 }

ibmappnIsAcGlobeMgrName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (3..17))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The name of the manager who set the manager UTC times or NULL
          if the manager name has not been set.  It contains:

           a. the network id of the manager,
           b. a period (.)
           c. the cp name of the manager.

           By setting this value, the agent will create time record with
           its corresponding time and name.  When setting this object,
           the manager should also set all other ibmappnIsAcGlobeMgr
           objects with the same SET operation."

      ::=  { ibmappnIsAcGlobal 13 }

-- *********************************************************************
-- Intermediate Session Accounting Buffer Type Table
-- ---------------------------------------------------------------------
-- This table contains information on the accounting buffer types
-- (recording medias).  It provides:
-- * monitoring of buffer type (media) statistics
-- * starting and stopping recording
-- * setting of buffer type (media) recording characteristics:
--   - maximum number of buffers
--   - maximum number of records/buffer
--   - recording format
--   - full action
-- * resetting of statistics
-- *********************************************************************

ibmappnIsAcBtypeTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IbmappnIsAcBtypeEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Intermediate Session Accounting Buffer Type Table"

      ::= { ibmappnIsAccounting 2 }

ibmappnIsAcBtypeEntry OBJECT-TYPE
      SYNTAX IbmappnIsAcBtypeEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Entry of Intermediate Session Accounting Buffer Type Table."

      INDEX
             { ibmappnIsAcBtypeMedia }

      ::= { ibmappnIsAcBtypeTable 1 }

IbmappnIsAcBtypeEntry ::= SEQUENCE {
      ibmappnIsAcBtypeMedia          INTEGER,
      ibmappnIsAcBtypeActive         INTEGER,
      ibmappnIsAcBtypeDirName        DisplayString,
      ibmappnIsAcBtypePrdMaxBufs     INTEGER,
      ibmappnIsAcBtypeMaxBufs        INTEGER,
      ibmappnIsAcBtypeCurBufs        Gauge,
      ibmappnIsAcBtypePrdRecPerBuf   INTEGER,
      ibmappnIsAcBtypeRecPerBuf      INTEGER,
      ibmappnIsAcBtypeRecFormat      INTEGER,
      ibmappnIsAcBtypeFullAction     INTEGER,
      ibmappnIsAcBtypeFullTime       TimeTicks,
      ibmappnIsAcBtypeFullReason     INTEGER,
      ibmappnIsAcBtypeFullWraps      INTEGER,
      ibmappnIsAcBtypeFullLosts      INTEGER,
      ibmappnIsAcBtypeErrorWraps     INTEGER,
      ibmappnIsAcBtypeErrorLosts     INTEGER,
      ibmappnIsAcBtypeCheckPts       INTEGER,
      ibmappnIsAcBtypePurges         INTEGER,
      ibmappnIsAcBtypeDeletes        INTEGER,
      ibmappnIsAcBtypeResets         INTEGER,
      ibmappnIsAcBtypeClearStats     INTEGER
                       }

ibmappnIsAcBtypeMedia OBJECT-TYPE
      SYNTAX INTEGER {
                     memory(1),
                     dasd(2)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The media for storing the intermediate session accounting
          records."

      ::= { ibmappnIsAcBtypeEntry 1 }

ibmappnIsAcBtypeActive OBJECT-TYPE
      SYNTAX INTEGER {
                     no(1),
                     yes(2)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "Indicates whether or not the buffer media is active.
           1. no:  indicates the buffer media is not currently
                   used for recording.
           2. yes: indicates the buffer media is currently being
                   used for recording."

      ::= { ibmappnIsAcBtypeEntry 2 }

ibmappnIsAcBtypeDirName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..255))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The name of the directory which will be used to allocate and
          write buffers of this type.  For memory buffer types, this
          field will be NULL."

      ::= { ibmappnIsAcBtypeEntry 3 }

ibmappnIsAcBtypePrdMaxBufs OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The maximum number of buffer media supported by the product."

      ::= { ibmappnIsAcBtypeEntry 4 }

ibmappnIsAcBtypeMaxBufs OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The maximum number of buffer media that will be used for
          recording accounting information.  This value must be in the
          range of zero to the Product Maximum."

      ::= { ibmappnIsAcBtypeEntry 5 }

ibmappnIsAcBtypeCurBufs OBJECT-TYPE
      SYNTAX Gauge
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The current number of buffer media.  This is the sum of all
           full and in use buffers of this type."

      ::= { ibmappnIsAcBtypeEntry 6 }

ibmappnIsAcBtypePrdRecPerBuf OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The maximum number of records supported by the product."

      ::= { ibmappnIsAcBtypeEntry 7 }

ibmappnIsAcBtypeRecPerBuf OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The maximum number of records which will be recorded in an
          individual buffer.  This value must be in the range of zero to
          the Product Maximum."

      ::= { ibmappnIsAcBtypeEntry 8 }

ibmappnIsAcBtypeRecFormat OBJECT-TYPE
      SYNTAX INTEGER {
                     ascii(1),
                     binary(2)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
           "This defines the recording format of records.
            (1) ascii:   records are recorded in ascii
                         (English text format)
            (2) binary:  records are recorded in binary
                         (machine readable format)"

      ::= { ibmappnIsAcBtypeEntry 9 }

ibmappnIsAcBtypeFullAction OBJECT-TYPE
      SYNTAX INTEGER {
                     halt(1),
                     wrap(2)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
           "This defines the behaviour used when all media buffers
            are full.
            (1) halt: stop creating new records
            (2) wrap: overwrite the existing records."

      ::= { ibmappnIsAcBtypeEntry 10 }

ibmappnIsAcBtypeFullTime OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The time when the full condition was encountered.  This time
          is represented in hundredths of a second since the node was
          started, up to a value of 2**32-1 (4,294,967,295), after which
          it wraps."

      ::= { ibmappnIsAcBtypeEntry 11 }

ibmappnIsAcBtypeFullReason OBJECT-TYPE
      SYNTAX INTEGER {
                     notFull(1),
                     physicallyFull(2),
                     logicallyFull(3),
                     ioErrors(4)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The reason the buffer media is full.
            (1) The media is not full.
            (2) The maximum number of buffers have been reached,
                all buffers are full, and the full action is halt.
            (3) The maximum number of buffers is zero or
                the maximum number of records is less than 5 or
                a unique record number cannot be generated.
            (4) Unable to write to the media due to I/O errors."

      ::= { ibmappnIsAcBtypeEntry 12 }

ibmappnIsAcBtypeFullWraps OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The number of accounting records being overwritten due to
           buffer full situation."

      ::= { ibmappnIsAcBtypeEntry 13 }

ibmappnIsAcBtypeFullLosts OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The number of new accounting records lost due to the buffer
           full situation."

      ::= { ibmappnIsAcBtypeEntry 14 }

ibmappnIsAcBtypeErrorWraps OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The number of accounting records lost to due to other
           reasons, (e.g. I/O error, software error) while in a wrap
           condition."

      ::= { ibmappnIsAcBtypeEntry 15 }

ibmappnIsAcBtypeErrorLosts OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The number of accounting records lost to due to other
           reasons, (e.g. I/O error, software error) while not in a full
           condition."

      ::= { ibmappnIsAcBtypeEntry 16 }

ibmappnIsAcBtypeCheckPts OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of times a buffer of this type has been recorded to
          for checkpointing active intermediate sessions."

      ::= { ibmappnIsAcBtypeEntry 17 }

ibmappnIsAcBtypePurges OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of times a buffer of this type has been purged."

      ::= { ibmappnIsAcBtypeEntry 18 }

ibmappnIsAcBtypeDeletes OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of times entries have been deleted from a buffer of
          this type."

      ::= { ibmappnIsAcBtypeEntry 19 }

ibmappnIsAcBtypeResets OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of times the Btype counters have been reset as a
          result of a SET."

      ::= { ibmappnIsAcBtypeEntry 20 }

ibmappnIsAcBtypeClearStats OBJECT-TYPE
      SYNTAX INTEGER {
                     ready(1),
                     yes(2)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "By setting this object to yes, all statistics for this media
          type will be cleared (set to zero); and the Btype reset counter
          will be incremented.  Objects affected by this include:

           - ibmappnIsAcBtypeFullTime
           - ibmappnIsAcBtypeFullReason
           - ibmappnIsAcBtypeFullWraps
           - ibmappnIsAcBtypeFullLosts
           - ibmappnIsAcBtypeErrorWraps
           - ibmappnIsAcBtypeErrorLosts
           - ibmappnIsAcBtypeCheckPts
           - ibmappnIsAcBtypePurges
           - ibmappnIsAcBtypeDeletes"

      ::= { ibmappnIsAcBtypeEntry 21 }

-- *********************************************************************
-- Intermediate Session Accounting Buffer Table
-- ---------------------------------------------------------------------
-- This table contains information on accounting buffers of a
-- a specific buffer type.  It provides for:
-- * deleting of records
-- * purging of buffers
-- * switching active buffers
-- *********************************************************************

ibmappnIsAcBufTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IbmappnIsAcBufEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Intermediate Session Accounting Buffer Table"

      ::= { ibmappnIsAccounting 3 }

ibmappnIsAcBufEntry OBJECT-TYPE
      SYNTAX IbmappnIsAcBufEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Entry of Intermediate Session Accounting Buffer Table."

      INDEX
             { ibmappnIsAcBufMedia,
               ibmappnIsAcBufNumber }

      ::= { ibmappnIsAcBufTable 1 }

IbmappnIsAcBufEntry ::= SEQUENCE {
      ibmappnIsAcBufMedia            INTEGER,
      ibmappnIsAcBufNumber           INTEGER,
      ibmappnIsAcBufState            INTEGER,
      ibmappnIsAcBufRecFormat        INTEGER,
      ibmappnIsAcBufMaxRecords       INTEGER,
      ibmappnIsAcBufOldestIndex      INTEGER,
      ibmappnIsAcBufNewestIndex      INTEGER,
      ibmappnIsAcBufName             DisplayString
                       }

ibmappnIsAcBufMedia OBJECT-TYPE
      SYNTAX INTEGER {
                     memory(1),
                     dasd(2)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "The media for storing the intermediate session accounting
           records."

      ::= { ibmappnIsAcBufEntry 1 }

ibmappnIsAcBufNumber OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Number of the buffer.  Each time a new buffer is used for
          recording, an incremented number will be assigned.  Thus, the
          order of in which the buffers were filled can be determined."

      ::=  { ibmappnIsAcBufEntry 2 }

ibmappnIsAcBufState OBJECT-TYPE
      SYNTAX INTEGER {
                     complete(1),
                     active(2),
                     purge(3)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The current buffer state.
           1. complete: indicates the buffer is full or recording is not
                        active for this buffer.  In either case, the
                        buffer is ready to be retrieved.  This value may
                        be specified in a SET operation to change a
                        buffer's state from active to complete.

           2. active:   indicates the buffer is current being used for
                        recording.  This value is not valid for use in a
                        SET operation.

           3. purge:    indicates the buffer should be purged.
                        This value may be specified in a SET operation to
                        remove a buffer.  Specification of this value is
                        only valid for complete buffers.  It is not valid
                        for active buffers."

      ::=  { ibmappnIsAcBufEntry 3 }

ibmappnIsAcBufRecFormat OBJECT-TYPE
      SYNTAX INTEGER {
                     ascii(1),
                     binary(2)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "This defines the recording format of records.
            (1) ascii:   records are recorded in ascii
                         (English text format)
            (2) binary:  records are recorded in binary
                         (machine readable format)"

      ::= { ibmappnIsAcBufEntry 4 }

ibmappnIsAcBufMaxRecords OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The maximum number of records this buffer may contain.  It is
          derived from the number of records per buffer set in the buffer
          type table."

      ::=  { ibmappnIsAcBufEntry 5 }

ibmappnIsAcBufOldestIndex OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "The oldest accounting index contained in this buffer.  By
          setting this object, all records with indexes less than this
          value will be deleted.  Setting of this object will not be
          honored for all types of buffers."

      ::=  { ibmappnIsAcBufEntry 6 }

ibmappnIsAcBufNewestIndex OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The newest accounting index contained in this buffer."

      ::=  { ibmappnIsAcBufEntry 7 }

ibmappnIsAcBufName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (1..64))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The name of the buffer."

      ::=  { ibmappnIsAcBufEntry 8 }

-- *********************************************************************
-- Intermediate Session Accounting Time Table
-- ---------------------------------------------------------------------
-- This table contains information on accounting events
-- *********************************************************************

ibmappnIsAcTimeTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IbmappnIsAcTimeEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Intermediate Session Accounting Time Table"

      ::= { ibmappnIsAccounting 4 }

ibmappnIsAcTimeEntry OBJECT-TYPE
      SYNTAX IbmappnIsAcTimeEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Entry of Intermediate Session Accounting Time Table."

      INDEX
             { ibmappnIsAcTimeIndex }

      ::= { ibmappnIsAcTimeTable 1 }

IbmappnIsAcTimeEntry ::= SEQUENCE {
      ibmappnIsAcTimeIndex                INTEGER,
      ibmappnIsAcTimeEntryType            INTEGER,
      ibmappnIsAcTimeForMedia             INTEGER,
      ibmappnIsAcTimeRecTime              TimeTicks,

      ibmappnIsAcTimeAgtUtcSecs           INTEGER,
      ibmappnIsAcTimeAgtUtcMins           INTEGER,
      ibmappnIsAcTimeAgtUtcHours          INTEGER,
      ibmappnIsAcTimeAgtUtcMdays          INTEGER,
      ibmappnIsAcTimeAgtUtcMonths         INTEGER,
      ibmappnIsAcTimeAgtUtcYears          INTEGER,
      ibmappnIsAcTimeAgtUtcWdays          INTEGER,
      ibmappnIsAcTimeAgtUtcYdays          INTEGER,
      ibmappnIsAcTimeAgtUtcIsdst          INTEGER,
      ibmappnIsAcTimeAgtName              DisplayString,

      ibmappnIsAcTimeMgrUtcSecs           INTEGER,
      ibmappnIsAcTimeMgrUtcMins           INTEGER,
      ibmappnIsAcTimeMgrUtcHours          INTEGER,
      ibmappnIsAcTimeMgrUtcMdays          INTEGER,
      ibmappnIsAcTimeMgrUtcMonths         INTEGER,
      ibmappnIsAcTimeMgrUtcYears          INTEGER,
      ibmappnIsAcTimeMgrUtcWdays          INTEGER,
      ibmappnIsAcTimeMgrUtcYdays          INTEGER,
      ibmappnIsAcTimeMgrUtcIsdst          INTEGER,
      ibmappnIsAcTimeMgrName              DisplayString,
      ibmappnIsAcTimeMgrTimeValid         INTEGER
                               }

ibmappnIsAcTimeIndex OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Intermediate Session Time record index.  This object starts
          with 0, and increase up to maximum value of 2**31-1
          (2,147,483,647), after which it wraps."

      ::=  { ibmappnIsAcTimeEntry 1 }

ibmappnIsAcTimeEntryType OBJECT-TYPE
      SYNTAX INTEGER {
                     startCollection(1),
                     endCollection(2),
                     createdMedia(3),
                     wrappedMedia(4),
                     timeChange(5),
                     managerSetTime(6),
                     recordFormatChanged(7),
                     timeReference(8)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Indicates whether the entry was made as the result of:
           1. a SET to start collecting accounting data, or
           2. a SET to stop  collecting accounting data, or
           3. the creation of a new media to store accounting data, or
           4. a media was full and wrapped (over writing records), or
           5. the system time changed, or
           6. a manager set the manager times and/or manager name, or
           7. the record format for this media changed, or
           8. time reference for the media"

      ::=  { ibmappnIsAcTimeEntry 2 }

ibmappnIsAcTimeForMedia OBJECT-TYPE
      SYNTAX INTEGER {
                     memoryMedia(1),
                     dasdMedia(2),
                     allMedias(99)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "This object qualifies the time entry type.  It indicates
           the media type(s) to which the entry applies."

      ::=  { ibmappnIsAcTimeEntry 3 }

ibmappnIsAcTimeRecTime OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The time when the intermediate session record was created.
          This time is represented in hundredths of a second since the
          node was started, up to a value of 2**32-1 (4,294,967,295),
          after which it wraps."

      ::=  { ibmappnIsAcTimeEntry 4 }

ibmappnIsAcTimeAgtUtcSecs OBJECT-TYPE
      SYNTAX INTEGER (0..59)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) seconds.
           It contains an integer from 0 to 59."

      ::=  { ibmappnIsAcTimeEntry 5 }

ibmappnIsAcTimeAgtUtcMins OBJECT-TYPE
      SYNTAX INTEGER (0..59)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) minutes.
           It contains an integer from 0 to 59."

      ::=  { ibmappnIsAcTimeEntry 6 }

ibmappnIsAcTimeAgtUtcHours OBJECT-TYPE
      SYNTAX INTEGER (0..23)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) hours.  It
          contains an integer from 0 to 23."

      ::=  { ibmappnIsAcTimeEntry 7 }

ibmappnIsAcTimeAgtUtcMdays OBJECT-TYPE
      SYNTAX INTEGER (1..31)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) day of the month.
          It contains an integer from 1 to 31."

      ::=  { ibmappnIsAcTimeEntry 8 }


ibmappnIsAcTimeAgtUtcMonths OBJECT-TYPE
      SYNTAX INTEGER {
                     january(0),
                     february(1),
                     march(2),
                     april(3),
                     may(4),
                     june(5),
                     july(6),
                     august(7),
                     september(8),
                     october(9),
                     november(10),
                     december(11)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) months since
          January.  It contains an integer from 0 to 11."

      ::=  { ibmappnIsAcTimeEntry 9 }

ibmappnIsAcTimeAgtUtcYears OBJECT-TYPE
      SYNTAX INTEGER (0..1000)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's number of years since 1900.  For years up
          through 1999, this value is identical to the manager's
          Coordinated Universal Time (UTC) years.  Beginning in the year
          2000, however, this value will be greater than the UTC years
          value by 100 (or more)."

      ::=  { ibmappnIsAcTimeEntry 10 }

ibmappnIsAcTimeAgtUtcWdays OBJECT-TYPE
      SYNTAX INTEGER {
                     sunday(0),
                     monday(1),
                     tuesday(2),
                     wednesday(3),
                     thursday(4),
                     friday(5),
                     saturday(6)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) days since
          Sunday.  It contains an integer from 0 to 6."

      ::=  { ibmappnIsAcTimeEntry 11 }

ibmappnIsAcTimeAgtUtcYdays OBJECT-TYPE
      SYNTAX INTEGER (0..365)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) days since
          January 1.  It contains an integer from 0 to 365."

      ::=  { ibmappnIsAcTimeEntry 12 }

ibmappnIsAcTimeAgtUtcIsdst OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The agent's Coordinated Universal Time (UTC) daylight saving
          time flag.  It is positive if daylight saving time is in
          effect.  It is zero if daylight saving time is not in effect.
          It is negative if the manager causing this entry to be created
          did not support the function."

      ::=  { ibmappnIsAcTimeEntry 13 }

ibmappnIsAcTimeAgtName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (3..17))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The name of the agent who set the agent UTC times.  It
          contains:

           a. the network id of the agent,
           b. a period (.)
           c. the cp name of the agent."

      ::=  { ibmappnIsAcTimeEntry 14 }

ibmappnIsAcTimeMgrUtcSecs OBJECT-TYPE
      SYNTAX INTEGER (0..59)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) seconds.
           It contains an integer from 0 to 59."

      ::=  { ibmappnIsAcTimeEntry 15 }

ibmappnIsAcTimeMgrUtcMins OBJECT-TYPE
      SYNTAX INTEGER (0..59)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) minutes.
           It contains an integer from 0 to 59."

      ::=  { ibmappnIsAcTimeEntry 16 }

ibmappnIsAcTimeMgrUtcHours OBJECT-TYPE
      SYNTAX INTEGER (0..23)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) hours.
           It contains an integer from 0 to 23."

      ::=  { ibmappnIsAcTimeEntry 17 }

ibmappnIsAcTimeMgrUtcMdays OBJECT-TYPE
      SYNTAX INTEGER (0..31)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) day of the
          month.  It contains an integer from 1 to 31; or 0 if the
          manager did not set the ibmappnIsAcGlobeMgrUtcMdays object."

      ::=  { ibmappnIsAcTimeEntry 18 }

ibmappnIsAcTimeMgrUtcMonths OBJECT-TYPE
      SYNTAX INTEGER {
                     january(0),
                     february(1),
                     march(2),
                     april(3),
                     may(4),
                     june(5),
                     july(6),
                     august(7),
                     september(8),
                     october(9),
                     november(10),
                     december(11)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) months since
          January.  It contains an integer from 0 to 11."

      ::=  { ibmappnIsAcTimeEntry 19 }

ibmappnIsAcTimeMgrUtcYears OBJECT-TYPE
      SYNTAX INTEGER (0..1000)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's number of years since 1900.  For years up
          through 1999, this value is identical to the manager's
          Coordinated Universal Time (UTC) years.  Beginning in the year
          2000, however, this value will be greater than the UTC years
          value by 100 (or more)."

      ::=  { ibmappnIsAcTimeEntry 20 }

ibmappnIsAcTimeMgrUtcWdays OBJECT-TYPE
      SYNTAX INTEGER {
                     sunday(0),
                     monday(1),
                     tuesday(2),
                     wednesday(3),
                     thursday(4),
                     friday(5),
                     saturday(6)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) days since
          Sunday.  It contains an integer from 0 to 6."

      ::=  { ibmappnIsAcTimeEntry 21 }

ibmappnIsAcTimeMgrUtcYdays OBJECT-TYPE
      SYNTAX INTEGER (0..365)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) days since
          January 1.  It contains an integer from 0 to 365."

      ::=  { ibmappnIsAcTimeEntry 22 }

ibmappnIsAcTimeMgrUtcIsdst OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The manager's Coordinated Universal Time (UTC) daylight saving
          time flag.  It is positive if daylight saving time is in
          effect.  It is zero if daylight saving time is not in effect.
          It is negative if the manager does not support the function."

      ::=  { ibmappnIsAcTimeEntry 23 }

ibmappnIsAcTimeMgrName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..17))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The name of the manager who set the manager UTC times or NULL
          if the manager name has not been set.  It contains:

           a. the network id of the manager,
           b. a period (.)
           c. the cp name of the manager."

      ::=  { ibmappnIsAcTimeEntry 24 }

ibmappnIsAcTimeMgrTimeValid OBJECT-TYPE
      SYNTAX INTEGER  {
                      notvalid(1),
                      valid(2)
                      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "This indicates rather or not the  manager UTC times are
          valid.  It is set by the manager if the manager determines the
          manager UTC times are valid."

      ::=  { ibmappnIsAcTimeEntry 25 }

-- *********************************************************************
-- Intermediate Session Accounting Data Table
-- ---------------------------------------------------------------------
-- This table contains accounting data for intermediate sessions
-- *********************************************************************

ibmappnIsAcDataTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IbmappnIsAcDataEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Intermediate Session Accounting Data Table"

      ::= { ibmappnIsAccounting 5 }

ibmappnIsAcDataEntry OBJECT-TYPE
      SYNTAX IbmappnIsAcDataEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
           "Entry of Intermediate Session Accounting Data Table."

      INDEX
             { ibmappnIsAcIndex }

      ::= { ibmappnIsAcDataTable 1 }

IbmappnIsAcDataEntry ::= SEQUENCE {
      ibmappnIsAcIndex                  INTEGER,
      ibmappnIsAcEntryType              INTEGER,
      ibmappnIsAcRecTime                TimeTicks,

      ibmappnIsAcFqLuName               DisplayString,
      ibmappnIsAcPcid                   OCTET STRING,
      ibmappnIsAcPriLuName              DisplayString,
      ibmappnIsAcSecLuName              DisplayString,
      ibmappnIsAcCosName                DisplayString,
      ibmappnIsAcModeName               DisplayString,
      ibmappnIsAcTransPriority          INTEGER,

      ibmappnIsAcSessType               INTEGER,
      ibmappnIsAcSessState              INTEGER,
      ibmappnIsAcSessStartTime          TimeTicks,
      ibmappnIsAcSessUpTime             TimeTicks,
      ibmappnIsAcCtrUpTime              TimeTicks,
      ibmappnIsAcEndReason              OCTET STRING,

      ibmappnIsAcP2SFmdPius             Counter,
      ibmappnIsAcS2PFmdPius             Counter,
      ibmappnIsAcP2SNonFmdPius          Counter,
      ibmappnIsAcS2PNonFmdPius          Counter,
      ibmappnIsAcP2SFmdBytes            Counter,
      ibmappnIsAcS2PFmdBytes            Counter,
      ibmappnIsAcP2SNonFmdBytes         Counter,
      ibmappnIsAcS2PNonFmdBytes         Counter,

      ibmappnIsAcRouteInfo              OCTET STRING
                               }

ibmappnIsAcIndex OBJECT-TYPE
      SYNTAX INTEGER (0..2147483647)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Session accounting record index.  Upon initial startup, it
           will begin with 0, and increase up to maximum value of
           2**31-1 (2,147,483,647), and wraps.  Upon subsequent startups,
           it will be initialized with the value of the oldest index
           for any media type, or with 0 if no indices are found."

      ::=  { ibmappnIsAcDataEntry 1 }

ibmappnIsAcEntryType OBJECT-TYPE
      SYNTAX INTEGER {
                     startEntry(1),
                     endEntry(2),
                     thresholdEntry(3),
                     checkpointEntry(4)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Indicates whether the entry was made as the result of:
           1. a session starting or,
           2. a session ending or,
           3. a session threshold's being reached or
           4. a session checkpoint request"

      ::=  { ibmappnIsAcDataEntry 2 }

ibmappnIsAcRecTime OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The time when the record was created.  This time is
          represented in hundredths of a second since the node was
          started, up to a value of 2**32-1 (4,294,967,295), after which
          it wraps."

      ::=  { ibmappnIsAcDataEntry 3 }

ibmappnIsAcFqLuName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (3..17))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The network-qualified CP name or PU name of the node at which
          the session and pcid originated.  For APPN and LEN nodes, this
          is either CP name of the APPN node at which the origin LU is
          located or the CP name of the NN serving the LEN node at which
          the origin LU is located.  This field is from 3 to 17
          characters in length, including a period (.) which separates
          the NetId from the NAU name."

      ::=  { ibmappnIsAcDataEntry 4 }

ibmappnIsAcPcid OBJECT-TYPE
      SYNTAX OCTET STRING  (SIZE (8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The procedure correlation identifier (pcid) of a session.  It
          is an 8-octet value assigned by the primary LU."

      ::=  { ibmappnIsAcDataEntry 5 }

ibmappnIsAcPriLuName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (3..17))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Primary LU Name of the session."

      ::=  { ibmappnIsAcDataEntry 6 }

ibmappnIsAcSecLuName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (3..17))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Secondary LU Name of the session."

      ::=  { ibmappnIsAcDataEntry 7 }

ibmappnIsAcModeName OBJECT-TYPE
      SYNTAX DisplayString  (SIZE (1..8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The mode name used for this session"

      ::=  { ibmappnIsAcDataEntry 8 }

ibmappnIsAcCosName OBJECT-TYPE
      SYNTAX DisplayString  (SIZE (1..8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The class of service (cos) used for this session"

      ::=  { ibmappnIsAcDataEntry 9 }

ibmappnIsAcTransPriority OBJECT-TYPE
      SYNTAX INTEGER {
                     low(1),               --X'01'
                     medium(2),            --X'02'
                     high(3),              --X'03'
                     network(4)            --X'04'
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "Transmission priority for this session.
            The values are:
            1. Low
            2. Medium
            3. High
            4. Network"

      ::=  { ibmappnIsAcDataEntry 10 }

ibmappnIsAcSessType OBJECT-TYPE
      SYNTAX INTEGER {
                     lu62(1),
                     lu0thru3(2),
                     lu62dlur(3),
                     lu0thru3dlur(4)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The type of intermediate session.  Defined values are

              lu62         A session between LUs of type 6.2
                           (as indicated by the LU type in Bind)

              lu0thru3     A session between LUs of type 0, 1, 2, or 3
                           (as indicated by the LU type in Bind)

              lu62dlur     A session between LUs of type 6.2
                           (as indicated by the LU type in Bind).
                           One of the LUs is a dependent LU supported
                           by the dependent LU requester (DLUR)
                           function at this node.

              lu0thru3dlur  A session between LUs of type 0, 1, 2, or 3
                           (as indicated by the LU type in Bind)
                           One of the LUs is a dependent LU supported
                           by the dependent LU requester (DLUR)
                           function at this node."

      ::=  { ibmappnIsAcDataEntry 11 }

ibmappnIsAcSessState OBJECT-TYPE
      SYNTAX INTEGER {
                      inactive(1),
                      pendactive(2),
                      active(3),
                      pendinact(4)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Indicates the state of the session.
           1. session is pending inactive or,
           2. session is pending active or,
           3. session is active or,
           4. session is inactive "

      ::=  { ibmappnIsAcDataEntry 12 }

ibmappnIsAcSessStartTime OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The time when the session started.  This time is
          represented in hundredths of a second since the node was
          started, up to a value of 2**32-1 (4,294,967,295), after which
          it wraps."

      ::=  { ibmappnIsAcDataEntry 13 }

ibmappnIsAcSessUpTime OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Length of time the session has been active in hundredths of a
          second."

      ::=  { ibmappnIsAcDataEntry 14 }

ibmappnIsAcCtrUpTime OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "Length of time the session counters have been active in
          hundredths of a second."

      ::=  { ibmappnIsAcDataEntry 15 }

ibmappnIsAcEndReason OBJECT-TYPE
      SYNTAX OCTET STRING  (SIZE (4))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The SNA sense data reported when the session ended."

      ::=  { ibmappnIsAcDataEntry 16 }

ibmappnIsAcP2SFmdPius OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of FMD PIU's sent from the primary LU to the
          secondary LU."

      ::=  { ibmappnIsAcDataEntry 17 }

ibmappnIsAcS2PFmdPius OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of FMD PIU's sent from the secondary LU
           to the primary LU."

      ::=  { ibmappnIsAcDataEntry 18 }

ibmappnIsAcP2SNonFmdPius OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of non-FMD PIU's sent from the primary LU
           to the secondary LU."

      ::=  { ibmappnIsAcDataEntry 19 }

ibmappnIsAcS2PNonFmdPius OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of non-FMD PIU's sent from the secondary LU
           to the primary LU."

      ::=  { ibmappnIsAcDataEntry 20 }

ibmappnIsAcP2SFmdBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of FMD bytes sent from the primary LU
           to the secondary LU."

      ::=  { ibmappnIsAcDataEntry 21 }

ibmappnIsAcS2PFmdBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of FMD bytes sent from the secondary LU
           to the primary LU."

      ::=  { ibmappnIsAcDataEntry 22 }

ibmappnIsAcP2SNonFmdBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of non-FMD bytes sent from the primary LU
           to the secondary LU."

      ::=  { ibmappnIsAcDataEntry 23 }

ibmappnIsAcS2PNonFmdBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The number of non-FMD bytes sent from the secondary LU
           to the primary LU."

      ::=  { ibmappnIsAcDataEntry 24 }

ibmappnIsAcRouteInfo OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE (0..255))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The route selection control vector (RSCV x'2B') used for this
          session.  It is present for APPN nodes; for LEN nodes, a zero-
          length string is returned."

      ::=  { ibmappnIsAcDataEntry 25 }


-- ******************************************************************
-- IBM APPN intermediate-session accounting conformance
-- ******************************************************************

END