path: root/MIBS/junos/DRAFT-MSDP-MIB

--
-- This is draft-ietf-msdp-mib-07 with 'extra' text removed to keep
-- the mib compiler happy. 
---

DRAFT-MSDP-MIB DEFINITIONS ::= BEGIN


IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    experimental, Counter32, Gauge32, TimeTicks, Integer32
        FROM SNMPv2-SMI
    RowStatus, TruthValue, TimeStamp, DisplayString
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    InterfaceIndexOrZero
        FROM IF-MIB
    InetAddressType, InetAddress, InetPortNumber, InetAddressPrefixLength
        FROM INET-ADDRESS-MIB;

msdpMIB MODULE-IDENTITY
    LAST-UPDATED "200103010000Z"
    ORGANIZATION "IETF MSDP Working Group"
    CONTACT-INFO
           "Bill Fenner
            75 Willow Road
            Menlo Park, CA  94025
            Phone: +1 650 867 6073
            E-mail: fenner@research.att.com

            Dave Thaler
            One Microsoft Way
            Redmond, WA  98052
            Phone: +1 425 703 8835
            Email: dthaler@microsoft.com"
    DESCRIPTION
           "An experimental MIB module for MSDP Management."
    ::= { experimental 92 }

msdp           OBJECT IDENTIFIER ::= { msdpMIB 1 }

msdpScalars    OBJECT IDENTIFIER ::= { msdp 1 }


msdpEnabled OBJECT-TYPE
    SYNTAX     TruthValue
     MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "The state of MSDP on this MSDP speaker - globally enabled or
            disabled."
    ::= { msdpScalars 1 }

msdpCacheLifetime OBJECT-TYPE
    SYNTAX     TimeTicks
     MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "The lifetime given to SA cache entries when created or
            refreshed.  This is the [SA-State-Period] in the MSDP spec.
            A value of 0 means no SA caching is done by this MSDP
            speaker."
    ::= { msdpScalars 2 }

msdpNumSACacheEntries OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The total number of entries in the SA Cache table."
    ::= { msdpScalars 3 }

msdpSAHoldDownPeriod OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of seconds in the MSDP SA Hold-down period."
    ::= { msdpScalars 4 }

msdpSAStatePeriod OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of seconds in the MSDP SA State period."
    ::= { msdpScalars 5 }


msdpRPAddressType OBJECT-TYPE
    SYNTAX     InetAddressType
     MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "The type of the RP address used when sourcing MSDP SA
            messages.  May be unknown(0) on non-RP's or when the PIM RP
            address is correct."
    ::= { msdpScalars 6 }

msdpRPAddress OBJECT-TYPE
    SYNTAX     InetAddress
     MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "The RP address used when sourcing MSDP SA messages.  May be
            a null string on non-RP's or when the PIM RP address is
            correct."
    ::= { msdpScalars 7 }

---
--- The MSDP Requests table
---

msdpRequestsTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF MsdpRequestsEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The (conceptual) table listing group ranges and MSDP peers
            used when deciding where to send an SA Request message when
            required.  If SA Requests are not enabled, this table may be
            empty.

            In order to choose a peer to whom to send an SA Request for
            a given group G, the subset of entries in this table whose
            (msdpRequestsPeerType, msdpRequestsPeer) tuple represents a
            peer whose msdpPeerState is established are examined.  The
            set is further reduced by examining only those entries for
            which msdpPeerRequestsGroupAddressType equals the address
            type of G, and the entries with the highest value of
            msdpRequestsGroupPrefix are considered, where the group G
            falls within the range described by the combination of
            msdpRequestsGroup and msdpRequestsGroupPrefix.  (This
            sequence is commonly known as a 'longest-match' lookup.)

            Finally, if multiple entries remain, the entry with the
            lowest value of msdpRequestsPriority is chosen.  The SA
            Request message is sent to the peer described by this row."
    ::= { msdp 2 }

msdpRequestsEntry OBJECT-TYPE
    SYNTAX     MsdpRequestsEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "An entry (conceptual row) representing a group range used
            when deciding where to send an SA Request message."
    INDEX { msdpRequestsGroupAddressType, msdpRequestsGroupAddress,
            msdpRequestsGroupPrefix, msdpRequestsPriority }
    ::= { msdpRequestsTable 1 }

MsdpRequestsEntry ::= SEQUENCE {
        msdpRequestsGroupAddressType  InetAddressType,
        msdpRequestsGroupAddress      InetAddress,
        msdpRequestsGroupPrefix       InetAddressPrefixLength,
        msdpRequestsPriority          Integer32,
        msdpRequestsPeerType          InetAddressType,
        msdpRequestsPeer              InetAddress,
        msdpRequestsStatus            RowStatus
    }

msdpRequestsGroupAddressType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The address type of msdpRequestsGroupAddress.  Only ipv4 and
            ipv6 addresses are expected."
    ::= { msdpRequestsEntry 1 }

msdpRequestsGroupAddress OBJECT-TYPE
    SYNTAX     InetAddress (SIZE(1..36))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The group address that, when combined with the prefix length
            in this entry, represents the group range to which this row
            applies."
    ::= { msdpRequestsEntry 2 }

msdpRequestsGroupPrefix OBJECT-TYPE
    SYNTAX     InetAddressPrefixLength
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The prefix length that, when combined with the group address
            in this entry, represents the group range to which this row
            applies."
    ::= { msdpRequestsEntry 3 }

msdpRequestsPriority OBJECT-TYPE
    SYNTAX     Integer32 (0..100)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The priority of this peer.  The peer with the lowest
            priority value with which we have an active peering session
            (i.e. msdpPeerState = established) is the peer to whom SA
            requests for groups matching the entry's group range will be
            sent."
    ::= { msdpRequestsEntry 4 }

msdpRequestsPeerType OBJECT-TYPE
    SYNTAX     InetAddressType
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The address type of msdpRequestsPeer."
    ::= { msdpRequestsEntry 5 }

msdpRequestsPeer OBJECT-TYPE
    SYNTAX     InetAddress
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The peer to which MSDP SA Requests for groups matching this
            entry's group range will be sent.  This object combined with
            msdpRequestsPeerType must match the INDEX of a row in the
            msdpPeerTable, and to be considered, this peer's
            msdpPeerState must be established."
    ::= { msdpRequestsEntry 6 }

msdpRequestsStatus OBJECT-TYPE
    SYNTAX     RowStatus
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The status of this row, by which new rows may be added to
            the table or old rows may be deleted."
    ::= { msdpRequestsEntry 7 }


---
--- The MSDP Peer table
---

msdpPeerTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF MsdpPeerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The (conceptual) table listing the MSDP speaker's peers."
    ::= { msdp 3 }

msdpPeerEntry OBJECT-TYPE
    SYNTAX     MsdpPeerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "An entry (conceptual row) representing an MSDP peer."
    INDEX      { msdpPeerAddressType, msdpPeerRemoteAddress }
    ::= { msdpPeerTable 1 }

MsdpPeerEntry ::= SEQUENCE {
        msdpPeerAddressType                InetAddressType,
        msdpPeerRemoteAddress              InetAddress,
        msdpPeerState                      INTEGER,
        msdpPeerRPFFailures                Counter32,
        msdpPeerInSAs                      Counter32,
        msdpPeerOutSAs                     Counter32,
        msdpPeerInSARequests               Counter32,
        msdpPeerOutSARequests              Counter32,
        msdpPeerInSAResponses              Counter32,
        msdpPeerOutSAResponses             Counter32,
        msdpPeerInControlMessages          Counter32,
        msdpPeerOutControlMessages         Counter32,
        msdpPeerInDataPackets              Counter32,
        msdpPeerOutDataPackets             Counter32,
        msdpPeerFsmEstablishedTransitions  Counter32,
        msdpPeerFsmEstablishedTime         TimeStamp,
        msdpPeerInMessageTime              TimeStamp,
        msdpPeerLocalAddress               InetAddress,
        msdpPeerConnectRetryInterval       Integer32,
        msdpPeerHoldTimeConfigured         Integer32,
        msdpPeerKeepAliveConfigured        Integer32,
        msdpPeerDataTtl                    Integer32,
        msdpPeerProcessRequestsFrom        TruthValue,
        msdpPeerStatus                     RowStatus,
        msdpPeerRemotePort                 InetPortNumber,
        msdpPeerLocalPort                  InetPortNumber,
        msdpPeerEncapsulationType          INTEGER,
        msdpPeerConnectionAttempts         Counter32,
        msdpPeerInNotifications            Counter32,
        msdpPeerOutNotifications           Counter32,
        msdpPeerLastError                  OCTET STRING,
        msdpPeerIfIndex                    InterfaceIndexOrZero,
        msdpPeerDiscontinuityTime          TimeStamp
    }

msdpPeerAddressType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The address type of msdpPeerRemoteAddress and
            msdpPeerLocalAddress."
    ::= { msdpPeerEntry 1 }

msdpPeerRemoteAddress OBJECT-TYPE
    SYNTAX     InetAddress (SIZE(1..36))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The address of the remote MSDP peer."
    ::= { msdpPeerEntry 2 }

msdpPeerState OBJECT-TYPE
    SYNTAX     INTEGER {
                         inactive(1),
                         listen(2),
                         connecting(3),
                         established(4),
                         disabled(5)
                       }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The state of the MSDP TCP connection with this peer."
    ::= { msdpPeerEntry 3 }

msdpPeerRPFFailures OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of SA messages received from this peer which
            failed the Peer-RPF check.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 4 }

msdpPeerInSAs OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP SA messages received on this connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 5 }

msdpPeerOutSAs OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP SA messages transmitted on this
            connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 6 }

msdpPeerInSARequests OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP SA-Request messages received on this
            connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 7 }

msdpPeerOutSARequests OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP SA-Request messages transmitted on this
            connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 8 }

msdpPeerInSAResponses OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP SA-Response messages received on this
            connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 9 }

msdpPeerOutSAResponses OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP SA Response messages transmitted on this
            TCP connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 10 }

msdpPeerInControlMessages OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The total number of MSDP messages received on this TCP
            connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 11 }

msdpPeerOutControlMessages OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The total number of MSDP messages transmitted on this TCP
            connection.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 12 }

msdpPeerInDataPackets OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The total number of encapsulated data packets received from
            this peer.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 13 }

msdpPeerOutDataPackets OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The total number of encapsulated data packets sent to this
            peer.

            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            msdpPeerDiscontinuityTime."
    ::= { msdpPeerEntry 14 }

msdpPeerFsmEstablishedTransitions OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The total number of times the MSDP FSM transitioned into the
            established state."
    ::= { msdpPeerEntry 15 }

msdpPeerFsmEstablishedTime OBJECT-TYPE
    SYNTAX     TimeStamp
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "This timestamp is set to the value of sysUpTime when a peer
            transitions into or out of the Established state.  It is set
            to zero when the MSDP speaker is booted."
    ::= { msdpPeerEntry 16 }

msdpPeerInMessageTime OBJECT-TYPE
    SYNTAX     TimeStamp
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The sysUpTime value when the last MSDP message was received
            from the peer.  It is set to zero when the MSDP speaker is
            booted."
    ::= { msdpPeerEntry 17 }

msdpPeerLocalAddress OBJECT-TYPE
    SYNTAX     InetAddress
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The local IP address of this entry's MSDP connection."
    ::= { msdpPeerEntry 18 }

msdpPeerConnectRetryInterval OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    UNITS      "seconds"
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "Time interval in seconds for the [ConnectRetry-period] for
            this peer."
    REFERENCE "draft-ietf-msdp-spec-10.txt section 8.7"
    DEFVAL { 120 }
    ::= { msdpPeerEntry 19 }

msdpPeerHoldTimeConfigured OBJECT-TYPE
    SYNTAX     Integer32 (0|3..65535)
    UNITS      "seconds"
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "Time interval in seconds for the [HoldTime-Period]
            configured for this MSDP speaker with this peer."
    REFERENCE "draft-ietf-msdp-spec-10.txt section 8.5"
    DEFVAL { 90 }
    ::= { msdpPeerEntry 20 }

msdpPeerKeepAliveConfigured OBJECT-TYPE
    SYNTAX     Integer32 (0|1..21845)
    UNITS      "seconds"
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "Time interval in seconds for the [KeepAlive-Period]
            configured for this MSDP speaker with this peer.  A
            reasonable maximum value for this timer would be configured
            to be one third of that of msdpPeerHoldTimeConfigured.  If
            the value of this object is zero (0), no periodic KEEPALIVE
            messages are sent to the peer after the MSDP connection has
            been established."
    REFERENCE "draft-ietf-msdp-spec-10.txt section 8.6"
    DEFVAL { 30 }
    ::= { msdpPeerEntry 21 }

msdpPeerDataTtl OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The minimum TTL a packet is required to have before it may
            be forwarded using SA encapsulation to this peer."
    ::= { msdpPeerEntry 22 }

msdpPeerProcessRequestsFrom OBJECT-TYPE
    SYNTAX     TruthValue
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "This object indicates whether or not to process MSDP SA
            Request messages from this peer.  If True(1), MSDP SA
            Request messages from this peer are processed and replied to
            (if appropriate) with SA Response messages.  If False(2),
            MSDP SA Request messages from this peer are silently
            ignored.  It defaults to False when msdpCacheLifetime is 0
            and True when msdpCacheLifetime is non-0."
    ::= { msdpPeerEntry 23 }

msdpPeerStatus OBJECT-TYPE
    SYNTAX     RowStatus
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The RowStatus object by which peers can be added and
            deleted.  A transition to 'active' will cause the MSDP Start
            Event to be generated.  A transition out of the 'active'
            state will cause the MSDP Stop Event to be generated.  Care
            should be used in providing write access to this object
            without adequate authentication."
    ::= { msdpPeerEntry 24 }

msdpPeerRemotePort OBJECT-TYPE
    SYNTAX     InetPortNumber
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The remote port for the TCP connection between the MSDP
            peers."
    ::= { msdpPeerEntry 25 }

msdpPeerLocalPort OBJECT-TYPE
    SYNTAX     InetPortNumber
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The local port for the TCP connection between the MSDP
            peers."
    ::= { msdpPeerEntry 26 }

msdpPeerEncapsulationType OBJECT-TYPE
    SYNTAX     INTEGER {
                         none(0),
                         tcp(1),
                         udp(2),
                         gre(3)
                       }
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The encapsulation in use when encapsulating data in SA
            messages to this peer."
    DEFVAL     { gre }
    ::= { msdpPeerEntry 27 }

msdpPeerConnectionAttempts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of times the state machine has transitioned from
            inactive to connecting."
    ::= { msdpPeerEntry 28 }

msdpPeerInNotifications OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP Notification messages received from this
            peer."
    ::= { msdpPeerEntry 29 }

msdpPeerOutNotifications OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP Notification messages transmitted to this
            peer."
    ::= { msdpPeerEntry 30 }

msdpPeerLastError OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (2))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The last error code and subcode received via Notification
            from this peer.  If no error has occurred, this field is
            zero.  Otherwise, the first byte of this two byte OCTET
            STRING contains the O-bit and error code, and the second
            byte contains the subcode."
    REFERENCE "draft-ietf-msdp-spec-10.txt section 16.2.5 and 17"
    DEFVAL   { '0000'h }
    ::= { msdpPeerEntry 31 }

msdpPeerIfIndex OBJECT-TYPE
    SYNTAX     InterfaceIndexOrZero
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The interface index of the MSDP encapsulation interface for
            this peer, or zero if the encapsulation is not represented
            by an interface in the ifTable."
    DEFVAL   { 0 }
    ::= { msdpPeerEntry 32 }

msdpPeerDiscontinuityTime OBJECT-TYPE
    SYNTAX     TimeStamp
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The value of sysUpTime on the most recent occasion at which
            one or more of this entry's counters suffered a
            discontinuity.  See the DESCRIPTION of each object to see if
            it is expected to have discontinuities.  These
            discontinuities may occur at peer connection establishment.

            If no such discontinuities have occurred since the last
            reinitialization of the local management subsystem, then
            this object contains a zero value."
    ::= { msdpPeerEntry 33 }


---
--- The MSDP Source-Active Cache table
---

msdpSACacheTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF MsdpSACacheEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The (conceptual) table listing the MSDP SA advertisements
            currently in the MSDP speaker's cache."
    ::= { msdp 4 }

msdpSACacheEntry OBJECT-TYPE
    SYNTAX     MsdpSACacheEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "An entry (conceptual row) representing an MSDP SA
            advertisement.  The INDEX to this table includes
            msdpSACacheOriginRP for diagnosing incorrect MSDP
            advertisements; normally a Group and Source pair would be
            unique."
    INDEX      { msdpSACacheAddrType, msdpSACacheGroupAddr,
                 msdpSACacheSourceAddr, msdpSACacheSourcePrefix,
                 msdpSACacheOriginRP }
    ::= { msdpSACacheTable 1 }

MsdpSACacheEntry ::= SEQUENCE {
        msdpSACacheAddrType         InetAddressType,
        msdpSACacheGroupAddr        InetAddress,
        msdpSACacheSourceAddr       InetAddress,
        msdpSACacheSourcePrefix     InetAddressPrefixLength,
        msdpSACacheOriginRP         InetAddress,
        msdpSACachePeerLearnedFrom  InetAddress,
        msdpSACacheRPFPeer          InetAddress,
        msdpSACacheInSAs            Counter32,
        msdpSACacheInDataPackets    Counter32,
        msdpSACacheUpTime           TimeTicks,
        msdpSACacheExpiryTime       TimeTicks,
        msdpSACacheStatus           RowStatus
    }

msdpSACacheAddrType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The address type of all of the InetAddress object in this
            entry."
    ::= { msdpSACacheEntry 1 }

msdpSACacheGroupAddr OBJECT-TYPE
    SYNTAX     InetAddress (SIZE(1..36))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The group address of the SA Cache entry."
    ::= { msdpSACacheEntry 2 }

msdpSACacheSourceAddr OBJECT-TYPE
    SYNTAX     InetAddress (SIZE(1..36))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The source address of the SA Cache entry."
    ::= { msdpSACacheEntry 3 }

msdpSACacheSourcePrefix OBJECT-TYPE
    SYNTAX     InetAddressPrefixLength
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The Sprefix len of this SA Cache entry."
    ::= { msdpSACacheEntry 4 }

msdpSACacheOriginRP OBJECT-TYPE
    SYNTAX     InetAddress (SIZE(1..36))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The RP of the SA Cache entry.  This field is in the INDEX in
            order to catch multiple RP's advertising the same source and
            group."
    ::= { msdpSACacheEntry 5 }

msdpSACachePeerLearnedFrom OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The peer from which this SA Cache entry was last accepted.
            This address must correspond to the msdpPeerRemoteAddress
            value for a row in the MSDP Peer Table."
    ::= { msdpSACacheEntry 6 }

msdpSACacheRPFPeer OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The peer from which an SA message corresponding to this
            cache entry would be accepted (i.e. the RPF peer for
            msdpSACacheOriginRP).  This may be different than
            msdpSACachePeerLearnedFrom if this entry was created by an
            MSDP SA-Response.  This address must correspond to the
            msdpPeerRemoteAddress value for a row in the MSDP Peer
            Table, or may be 0.0.0.0 if no RPF peer exists."
    ::= { msdpSACacheEntry 7 }

msdpSACacheInSAs OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP SA messages received relevant to this
            cache entry.  This object must be initialized to zero when
            creating a cache entry."
    ::= { msdpSACacheEntry 8 }

msdpSACacheInDataPackets OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of MSDP encapsulated data packets received
            relevant to this cache entry.  This object must be
            initialized to zero when creating a cache entry."
    ::= { msdpSACacheEntry 9 }

msdpSACacheUpTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The time since this entry was placed in the SA cache."
    ::= { msdpSACacheEntry 10 }

msdpSACacheExpiryTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The time remaining before this entry will expire from the SA
            cache."
    ::= { msdpSACacheEntry 11 }

msdpSACacheStatus OBJECT-TYPE
    SYNTAX     RowStatus
     MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "The status of this row in the table.  The only allowable
            actions are to retrieve the status, which will be `active',
            or to set the status to `destroy' in order to remove this
            entry from the cache."
    ::= { msdpSACacheEntry 12 }


--
-- MSDP Mesh Group Membership table
--

msdpMeshGroupTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF MsdpMeshGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The (conceptual) table listing MSDP Mesh Group
            configuration."
    ::= { msdp 5 }

msdpMeshGroupEntry OBJECT-TYPE
    SYNTAX     MsdpMeshGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "An entry (conceptual row) repesenting a peer in an MSDP Mesh
            Group."
    INDEX        { msdpMeshGroupName, msdpMeshGroupPeerAddressType,
                   msdpMeshGroupPeerAddress }
    ::= { msdpMeshGroupTable 1 }

MsdpMeshGroupEntry ::= SEQUENCE {
        msdpMeshGroupName             DisplayString,
        msdpMeshGroupPeerAddressType  InetAddressType,
        msdpMeshGroupPeerAddress      InetAddress,
        msdpMeshGroupStatus           RowStatus
    }

msdpMeshGroupName OBJECT-TYPE
    SYNTAX     DisplayString (SIZE(1..64))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The name of the mesh group."
    ::= { msdpMeshGroupEntry 1 }

msdpMeshGroupPeerAddressType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The type of msdpMeshGroupPeerAddress."
    ::= { msdpMeshGroupEntry 2 }

msdpMeshGroupPeerAddress OBJECT-TYPE
    SYNTAX     InetAddress (SIZE(1..36))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "A peer address that is a member of the mesh group with name
            msdpMeshGroupName.  The tuple (msdpMeshGroupPeerAddressType,
            msdpMeshGroupPeerAddress) must match a row in the
            msdpPeerTable."
    ::= { msdpMeshGroupEntry 3 }

msdpMeshGroupStatus OBJECT-TYPE
    SYNTAX     RowStatus
     MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "This entry's status, by which new entries may be added to
            the table and old entries deleted."
    ::= { msdpMeshGroupEntry 4 }



-- Traps

msdpTraps   OBJECT IDENTIFIER ::= { msdp 0 }

msdpEstablished NOTIFICATION-TYPE
    OBJECTS { msdpPeerFsmEstablishedTransitions }
    STATUS     current
    DESCRIPTION
           "The MSDP Established event is generated when the MSDP FSM
            enters the ESTABLISHED state."
    ::= { msdpTraps 1 }

msdpBackwardTransition NOTIFICATION-TYPE
    OBJECTS { msdpPeerState }
    STATUS     current
    DESCRIPTION
           "The MSDPBackwardTransition Event is generated when the MSDP
            FSM moves from a higher numbered state to a lower numbered
            state."
    ::= { msdpTraps 2 }

-- conformance information

msdpMIBConformance OBJECT IDENTIFIER ::= { msdp 6 }
msdpMIBCompliances OBJECT IDENTIFIER ::= { msdpMIBConformance 1 }
msdpMIBGroups      OBJECT IDENTIFIER ::= { msdpMIBConformance 2 }

-- compliance statements

msdpMIBCompliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
           "The compliance statement for entities which implement the
            MSDP MIB."
   MODULE  -- this module
   MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup,
                      msdpMIBNotificationGroup }

       GROUP  msdpMIBEncapsulationGroup
        DESCRIPTION
           "This group is mandatory if MSDP encapsulation interfaces are
                not given their own interface index numbers."
       GROUP  msdpMIBSACacheGroup
        DESCRIPTION
           "This group is mandatory if the MSDP speaker has the ability
                to cache SA messages."
        GROUP  msdpMIBRequestsGroup
        DESCRIPTION
           "This group is mandatory if the MSDP speaker has the ability
                to send SA-Request messages and parse SA-Response
                messages."
        GROUP  msdpMIBRPGroup
        DESCRIPTION
           "This group is mandatory if the MSDP speaker sources (as
                opposed to forwards) MSDP messages."
        GROUP  msdpMIBMeshGroupGroup
        DESCRIPTION
           "This group is mandatory if the MSDP speaker can participate
                in MSDP Mesh Groups."

   ::= { msdpMIBCompliances 1 }

-- units of conformance

msdpMIBGlobalsGroup OBJECT-GROUP
   OBJECTS { msdpEnabled }
    STATUS     current
    DESCRIPTION
           "A collection of objects providing information on global MSDP
            state."
    ::= { msdpMIBGroups 1 }

msdpMIBPeerGroup OBJECT-GROUP
   OBJECTS { msdpPeerRPFFailures,
             msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs,
             msdpPeerInSARequests, msdpPeerOutSARequests,
             msdpPeerInSAResponses, msdpPeerOutSAResponses,
             msdpPeerInNotifications, msdpPeerOutNotifications,
             msdpPeerInControlMessages, msdpPeerOutControlMessages,
             msdpPeerFsmEstablishedTransitions,
             msdpPeerFsmEstablishedTime,
             msdpPeerLocalAddress,
             msdpPeerRemotePort, msdpPeerLocalPort,
             msdpPeerConnectRetryInterval,
             msdpPeerHoldTimeConfigured,
             msdpPeerKeepAliveConfigured,
             msdpPeerInMessageTime,
             msdpPeerProcessRequestsFrom,
             msdpPeerConnectionAttempts,
             msdpPeerLastError,
             msdpPeerIfIndex,
             msdpPeerStatus,
             msdpPeerDiscontinuityTime
           }
    STATUS     current
    DESCRIPTION
           "A collection of objects for managing MSDP peers."
    ::= { msdpMIBGroups 2 }

msdpMIBEncapsulationGroup OBJECT-GROUP
   OBJECTS { msdpPeerInDataPackets, msdpPeerOutDataPackets,
             msdpPeerDataTtl,
             msdpPeerEncapsulationType
           }
    STATUS     current
    DESCRIPTION
           "A collection of objects for managing encapsulations if the
            MSDP encapsulation interfaces are not given interface
            indices."
    ::= { msdpMIBGroups 3 }

msdpMIBSACacheGroup OBJECT-GROUP
    OBJECTS { msdpCacheLifetime, msdpNumSACacheEntries,
              msdpSAHoldDownPeriod, msdpSAStatePeriod,
              msdpSACachePeerLearnedFrom,
              msdpSACacheRPFPeer, msdpSACacheInSAs,
              msdpSACacheInDataPackets,
              msdpSACacheUpTime, msdpSACacheExpiryTime,
              msdpSACacheStatus }
    STATUS     current
    DESCRIPTION
           "A collection of objects for managing MSDP SA cache entries."
    ::= { msdpMIBGroups 4 }

msdpMIBNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS { msdpEstablished,
                    msdpBackwardTransition }
    STATUS     current
    DESCRIPTION
           "A collection of notifications for signaling changes in MSDP
            peer relationships."
    ::= { msdpMIBGroups 5 }

msdpMIBRequestsGroup OBJECT-GROUP
    OBJECTS { msdpRequestsPeerType, msdpRequestsPeer, msdpRequestsStatus }
    STATUS     current
    DESCRIPTION
           "A collection of objects for managing MSDP Request
            transmission."
    ::= { msdpMIBGroups 6 }

msdpMIBRPGroup OBJECT-GROUP
    OBJECTS { msdpRPAddressType, msdpRPAddress }
    STATUS     current
    DESCRIPTION
           "A collection of objects for MSDP speakers that source MSDP
            messages."
    ::= { msdpMIBGroups 7 }

msdpMIBMeshGroupGroup OBJECT-GROUP
    OBJECTS { msdpMeshGroupStatus }
    STATUS     current
    DESCRIPTION
           "A collection of objects for MSDP speakers that can
            participate in MSDP mesh groups."
    ::= { msdpMIBGroups 8 }

END