path: root/MIBS/junos/JUNIPER-IFOTN-MIB

--
-- Juniper Enterprise Specific MIB: OTN interface management
--
-- Copyright (c) 2012-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--

JUNIPER-IFOTN-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, NOTIFICATION-TYPE,
    Unsigned32, Counter32, Integer32
        FROM SNMPv2-SMI
    DisplayString, DateAndTime, TEXTUAL-CONVENTION, RowStatus, TruthValue
        FROM SNMPv2-TC
    jnxIfOtnMibRoot, jnxIfOtnNotifications
        FROM JUNIPER-SMI
    ifIndex, ifDescr
        FROM IF-MIB
    JnxoptIfOTNOChAlarms, JnxoptIfOTNODUkTcmAlarms
        FROM JNX-OPT-IF-EXT-MIB;

jnxIfOtnMib MODULE-IDENTITY
    LAST-UPDATED "201609122015Z" -- Mon Sep 12 20:15:00 IST 2016
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
            "        Juniper Technical Assistance Center
                     Juniper Networks, Inc.
                     1133 Innovation Way
                     Sunnyvale, CA 94089
                     E-mail: support@juniper.net"

    DESCRIPTION " Deprecated OCh2 tables and entries"
    REVISION      "201609122015Z"
    DESCRIPTION
               "Removed INDEX clause from unwanted places"
    REVISION    "201609122015Z"
    DESCRIPTION
            "This MIB module defines objects used for managing the
             OTN interface for Juniper products."
    REVISION      "201607271100Z"
    DESCRIPTION
               "Added config to leave fist byte of TTI as NULL
               per the G.709 recommendation."
    REVISION   "201506241227Z" 
    DESCRIPTION
               "Removed INDEX clause from unwanted places"
    REVISION    "201609122015Z"
    DESCRIPTION 
            "This MIB module defines objects used for managing the
             OTN interface for Juniper products."
    REVISION   "201506241227Z" 
    DESCRIPTION
            " Added OTN table entries for handling sub-port
             in the interface name. With suffix OCH2"
    REVISION      "201201270000Z"
    DESCRIPTION
               "Added OTN Alarms and PM data."
    REVISION      "201201270000Z"
    DESCRIPTION
               "Initial revision."
    ::= { jnxIfOtnMibRoot 1 }

--
-- Textual Conventions
--
JnxIfAdminStates ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  "Admin states for an interface"
    SYNTAX       INTEGER {
                      jnxAdminStateInService(1), 
                                      -- In service
                      jnxAdminStateInServiceMA(2),
                                      -- In service maintenance, the link is in
                                      -- service, but alarms are suppressed
                      jnxAdminStateOutofService(3), 
                                      -- Out of service due to a fault
                      jnxAdminStateOutofServiceMA(4)
                                      -- OOS maintenance as configured by the
                                      -- user, may or may not have alarms`
                 }
JnxIfOperStates ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  "Operational states for an interface"
    SYNTAX       INTEGER {
                       jnxOperStateInit(1),
                                     -- Starting state of the interface
                       jnxOperStateNormal(2),
                                     -- The interface is working normally
                       jnxOperStateFault(3),
                                     -- There is some traffic affecting fault
                                     -- on the interface eg LOS
                       jnxOperStateDegraded(4)
                                     -- There is some function affecting 
                                     -- degrading the performance on the
                                     --  interface for eg  BER
                 }

JnxIfOtnRate ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  "Rates for an interface "
    SYNTAX       INTEGER {
                   otu0(1),
                   otu1(2),
                   otu2(3),
                   otu2e(4),
                   otu3(5),
                   otu4(6), 
                   otu1e(7),
                   otu5(8)
                 }

JnxIfOtnFecType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  "fec modes of an interface "
    SYNTAX       INTEGER {
                     nofec(0),
                     gfec(1),
                     efecI2(2),
                     efecI3(3),
                     efecI4(4),
                     efecI5(5),
                     efecI6(6),
                     efecI7(7),
                     efecI8(8),
                     efecI9(9),
                     gfecandsdfec(10),
                     sdfec(11),
                     hgfec(12),
                     sdfec15(13)
                 }

JnxIfOtnLayer  ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  " Layer which describes the table"
    SYNTAX       INTEGER {
                    jnxOch(1),
                    jnxOTUk(2),
                    jnxODUk(3),
                    jnxTCM(4)
                 }

JnxIfOtnType  ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  " Near End or Far End "
    SYNTAX       INTEGER {
                    jnxNearEnd(1),
                    jnxFarEnd(2)      
                 }

JnxIfOtnDirection  ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  " Direction for the entities in the table"
    SYNTAX       INTEGER {
                    jnxTxDir(1),
                    jnxRxDir(2),
                    jnxBiDir(3)
                 }


JnxIfOtnSeverity  ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  " Severity of the Notification"
    SYNTAX       INTEGER {
                     jnxCritical(1),
                     jnxMajor(2),
                     jnxMinor(3),
                     jnxInfo(4)
                 }

JnxIfOtnServiceStateAction  ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  " Notification's action on the service state"
    SYNTAX       INTEGER {
                     jnxNotSupported(0),
                     jnxNonServiceAffecting(1),
                     jnxServiceAffecting(2)
                 }



jnxIfOtn               OBJECT IDENTIFIER ::= { jnxIfOtnMib 1 }
jnxIfOtnOCh2           OBJECT IDENTIFIER ::= { jnxIfOtnMib 2 }

--
-- Otn OCh options
jnxIfOtnOChCfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnOChCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Information about the Otn OCh Config Table. "
        ::= { jnxIfOtn 1 }

jnxIfOtnOChCfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnOChCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that contains of the Otn OCh Config Table."
        INDEX   { jnxIfOtnOChCfgContainerIndex, jnxIfOtnOChCfgL1Index,
                  jnxIfOtnOChCfgL2Index, jnxIfOtnOChCfgL3Index }
        ::= { jnxIfOtnOChCfgTable 1 }

JnxIfOtnOChCfgEntry ::=
    SEQUENCE {
            jnxIfOtnOChCfgContainerIndex
                             Integer32,
            jnxIfOtnOChCfgL1Index       
                             Integer32,
            jnxIfOtnOChCfgL2Index       
                             Integer32,
            jnxIfOtnOChCfgL3Index       
                             Integer32,
            jnxIfOtnLocalLoopback       
                             TruthValue,
            jnxIfOtnLineLoopback       
                             TruthValue,
            jnxIfOtnPayloadLoopback       
                             TruthValue,
            jnxIfOtnAdminState          
                             JnxIfAdminStates,
            jnxIfOtnOperState           
                             JnxIfOperStates,
            jnxIfOtnIndex              
                             Unsigned32,
            jnxIfOtnOChStatus         
                             BITS,
            jnxIfOtnOChPortMode
                             Unsigned32
    }

    jnxIfOtnOChCfgContainerIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
               "The associated jnxContentsContainerIndex  - eg shelf.."
        ::= { jnxIfOtnOChCfgEntry 1 }

    jnxIfOtnOChCfgL1Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level one index associated with this subject ... eg fpc
                 slot."
        ::= { jnxIfOtnOChCfgEntry 2 }

    jnxIfOtnOChCfgL2Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level two index associated with this subject .. eg pic
                 slot."
        ::= { jnxIfOtnOChCfgEntry 3 }

    jnxIfOtnOChCfgL3Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level three index associated with this subject..
                 eg port.
                "
        ::= { jnxIfOtnOChCfgEntry 4 }

    jnxIfOtnLocalLoopback OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This is the local loopback at the Line (after the optics)."
        ::= { jnxIfOtnOChCfgEntry 5 }

    jnxIfOtnLineLoopback OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This is the line loopback at the Line."
        ::= { jnxIfOtnOChCfgEntry 6 }

    jnxIfOtnPayloadLoopback OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This is the Payload loopback before the optics."
        ::= { jnxIfOtnOChCfgEntry 7 }

    jnxIfOtnAdminState OBJECT-TYPE
        SYNTAX          JnxIfAdminStates
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "The Admin state of this interface"
        ::= { jnxIfOtnOChCfgEntry 8 }

    jnxIfOtnOperState OBJECT-TYPE
        SYNTAX          JnxIfOperStates
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The operational state of this interface"
        ::= { jnxIfOtnOChCfgEntry 9 }

    jnxIfOtnIndex OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The interface ifIndex of this interface"
        ::= { jnxIfOtnOChCfgEntry 10 }

    jnxIfOtnOChStatus OBJECT-TYPE
        SYNTAX          BITS {
                            los(0),
                            lof(1),
                            lom(2),
                            wavelengthlockerr(3)
                        }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The interface status at the OCh layer."
        ::= { jnxIfOtnOChCfgEntry 11 }

    jnxIfOtnOChPortMode OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The Port Mode for this interface
                 0  -  default (not applicable)
                 1  -  lan
                 2  -  wan 
                 3  -  gfp
                "
        ::= { jnxIfOtnOChCfgEntry 12 }




-- otn interface options 
--
jnxIfOtnOTUkCfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnOTUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Information about the Otn OTUk config table. "
        ::= { jnxIfOtn 2 }

jnxIfOtnOTUkCfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnOTUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that contains the Otn OTUk config table.
                 "
        INDEX   { jnxIfOtnOTUkCfgContainerIndex, jnxIfOtnOTUkCfgL1Index,
                  jnxIfOtnOTUkCfgL2Index, jnxIfOtnOTUkCfgL3Index }
        ::= { jnxIfOtnOTUkCfgTable 1 }

JnxIfOtnOTUkCfgEntry ::=
    SEQUENCE {
            jnxIfOtnOTUkCfgContainerIndex         
                                  Integer32,
            jnxIfOtnOTUkCfgL1Index         
                                  Integer32,
            jnxIfOtnOTUkCfgL2Index       
                                  Integer32,
            jnxIfOtnOTUkCfgL3Index    
                                  Integer32,
            jnxIfOtnOTUkCfgRate 
                                  JnxIfOtnRate,
            jnxIfOtnOTUkCfgFecMode
                                  JnxIfOtnFecType,
            jnxIfOtnOTUkEnableAutoFrrByteInsert
                                  TruthValue,
            jnxIfOtnOTUkEnableBERFrrSupport
                                  TruthValue,
            jnxIfOtnOTUkPreFecBERThresholdMantissa
                                  Integer32,
            jnxIfOtnOTUkPreFecBERThresholdExponent
                                  Integer32,
            jnxIfOtnOTUkPreFecBERThresholdTime    
                                  Integer32,
            jnxIfOtnOTUkTIMActEnabled
                                  TruthValue,
            jnxIfOtnOTUkTxTTI
                                  OCTET STRING,
            jnxIfOtnOTUkRxTTI
                                  OCTET STRING,
            jnxIfOtnOTUkExpectedRxSapi
                                  OCTET STRING,
            jnxIfOtnOTUkExpectedRxDapi
                                  OCTET STRING,
            jnxIfOtnOTUkStatus
                                  BITS,
            jnxIfOtnOTUkPreFecBERThresholdClearMantissa
                                  Integer32,
            jnxIfOtnOTUkPreFecBERThresholdClearExponent
                                  Integer32,
            jnxIfOtnOTUkTxSapiTTIFstByteNul
                                  TruthValue,
            jnxIfOtnOTUkTxDapiTTIFstByteNul
                                  TruthValue,
            jnxIfOtnOTUkExpectedRxSapiFstByteNul
                                  TruthValue,
            jnxIfOtnOTUkExpectedRxDapiFstByteNul
                                  TruthValue
    }

    jnxIfOtnOTUkCfgContainerIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The associated jnxContentsContainerIndex  - eg shelf."
        ::= { jnxIfOtnOTUkCfgEntry 1 }

    jnxIfOtnOTUkCfgL1Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level one index associated with this subject ... eg fpc
                 slot."
        ::= { jnxIfOtnOTUkCfgEntry 2 }

    jnxIfOtnOTUkCfgL2Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level two index associated with this subject .. eg pic
                 slot."
        ::= { jnxIfOtnOTUkCfgEntry 3 }

    jnxIfOtnOTUkCfgL3Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level three index associated with this subject.. 
                 eg port.
                "
        ::= { jnxIfOtnOTUkCfgEntry 4 }


    jnxIfOtnOTUkCfgRate OBJECT-TYPE
        SYNTAX          JnxIfOtnRate
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This is the rate for the interface and the rates depend
                  on the interface/fru type. 
                "
        ::= { jnxIfOtnOTUkCfgEntry 5 }

    jnxIfOtnOTUkCfgFecMode OBJECT-TYPE
        SYNTAX          JnxIfOtnFecType
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This is the Fec type in the OTU frame and the selection
                  depends on the interface/fru type.  "
        ::= { jnxIfOtnOTUkCfgEntry 6 }

    jnxIfOtnOTUkEnableAutoFrrByteInsert OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will enable/disable the automatic insertion of 
                  the frr SF/SD byte in the overhead bytes(RES) "
        ::= { jnxIfOtnOTUkCfgEntry 7 }

    jnxIfOtnOTUkEnableBERFrrSupport OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will enable/disable the FRR support for BER "
        ::= { jnxIfOtnOTUkCfgEntry 8 }

    jnxIfOtnOTUkPreFecBERThresholdMantissa OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will set the BER threshold(mantissa), which when
                  crossed will trigger Signal Degrade.
                "
        ::= { jnxIfOtnOTUkCfgEntry 9 }

    jnxIfOtnOTUkPreFecBERThresholdExponent OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will set the BER threshold(exponent), which when
                  crossed will trigger Signal Degrade.
                "
        ::= { jnxIfOtnOTUkCfgEntry 10 }

    jnxIfOtnOTUkPreFecBERThresholdTime OBJECT-TYPE
        SYNTAX          Integer32
        UNITS           "ms"
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " 
                  The collection times (1ms - 1sec) to calculate the BER.
                "
        ::= { jnxIfOtnOTUkCfgEntry 11 }

    jnxIfOtnOTUkTIMActEnabled OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                 Indicates whether the Trace Identifier Mismatch (TIM)
                 Consequent Action function is enabled.
                 The default value of this object is false(2).
                "
        ::= { jnxIfOtnOTUkCfgEntry 12 }

    jnxIfOtnOTUkTxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..64))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " 
                  The Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined  
                "
        ::= { jnxIfOtnOTUkCfgEntry 13 }

    jnxIfOtnOTUkRxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(64))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "
                  The Receive Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined
                "
        ::= { jnxIfOtnOTUkCfgEntry 14 }

    jnxIfOtnOTUkExpectedRxSapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Expected receive SAPI.
                "
        ::= { jnxIfOtnOTUkCfgEntry 15 }

    jnxIfOtnOTUkExpectedRxDapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Expected receive DAPI. 
                "
        ::= { jnxIfOtnOTUkCfgEntry 16 }

    jnxIfOtnOTUkStatus OBJECT-TYPE
        SYNTAX          BITS {
                            ais(0),
                            bdi(1),
                            iae(2),
                            ttim(3),
                            sf(4),
                            sd(5),
                            biae(6),
                            tsf(7),
                            ssf(8),
                            fecexcessive(9),
                            fecdegrade(10),
                            fefecerr(11)
                        }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The interface status at the OTUk layer."
        ::= { jnxIfOtnOTUkCfgEntry 17 }

    jnxIfOtnOTUkPreFecBERThresholdClearMantissa OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will set the BER threshold(mantissa) for clear signal
                  degrade condition, which signal degrade condition will be
                  cleared when Pre-Fec error count is below the clear
                  threshold error count.
                "
        ::= { jnxIfOtnOTUkCfgEntry 18 }

    jnxIfOtnOTUkPreFecBERThresholdClearExponent OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will set the BER threshold(exponent) for clear signal
                  degrade condition, which signal degrade condition will be
                  cleared when Pre-Fec error count is below the clear threshold
                  error count.
                "
        ::= { jnxIfOtnOTUkCfgEntry 19 }

    jnxIfOtnOTUkTxSapiTTIFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnOTUkCfgEntry 20 }

    jnxIfOtnOTUkTxDapiTTIFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnOTUkCfgEntry 21 }

    jnxIfOtnOTUkExpectedRxSapiFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnOTUkCfgEntry 22 }

    jnxIfOtnOTUkExpectedRxDapiFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnOTUkCfgEntry 23 }

--
-- ODUk config table
--

jnxIfOtnODUkCfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnODUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Information about the Otn ODUk config table. "
        ::= { jnxIfOtn 3 }

jnxIfOtnODUkCfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnODUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that contains information about the 
                  Otn ODUk config.
                 "
        INDEX   { jnxIfOtnODUkCfgContainerIndex, jnxIfOtnODUkCfgL1Index,
                  jnxIfOtnODUkCfgL2Index, jnxIfOtnODUkCfgL3Index
                 }
        ::= { jnxIfOtnODUkCfgTable 1 }

JnxIfOtnODUkCfgEntry ::=
    SEQUENCE {
            jnxIfOtnODUkCfgContainerIndex
                                  Integer32,
            jnxIfOtnODUkCfgL1Index       
                                  Integer32,
            jnxIfOtnODUkCfgL2Index       
                                  Integer32,
            jnxIfOtnODUkCfgL3Index       
                                  Integer32,
            jnxIfOtnODUkAPSPCC0          
                                  Integer32,
            jnxIfOtnODUkAPSPCC1          
                                  Integer32,
            jnxIfOtnODUkAPSPCC2          
                                  Integer32,
            jnxIfOtnODUkAPSPCC3          
                                  Integer32,
            jnxIfOtnODUkPayloadType      
                                  Integer32,
            jnxIfOtnODUkTIMActEnabled
                                  TruthValue,
            jnxIfOtnODUkTxTTI
                                  OCTET STRING,
            jnxIfOtnODUkRxTTI
                                  OCTET STRING,
            jnxIfOtnODUkExpectedRxSapi
                                  OCTET STRING,
            jnxIfOtnODUkExpectedRxDapi
                                  OCTET STRING,
            jnxIfOtnODUkStatus
                                  BITS,
            jnxIfOtnODUkRxPayloadType      
                                  Integer32,
            jnxIfOtnODUkTxSapiTTIFstByteNul
                                  TruthValue,
            jnxIfOtnODUkTxDapiTTIFstByteNul
                                  TruthValue,
            jnxIfOtnODUkExpectedRxSapiFstByteNul
                                  TruthValue,
            jnxIfOtnODUkExpectedRxDapiFstByteNul
                                  TruthValue
     }

    jnxIfOtnODUkCfgContainerIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
               "The associated jnxContentsContainerIndex  - eg shelf.."
        ::= { jnxIfOtnODUkCfgEntry 1 }

    jnxIfOtnODUkCfgL1Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level one index associated with this subject ... eg fpc
                 slot."
        ::= { jnxIfOtnODUkCfgEntry 2 }

    jnxIfOtnODUkCfgL2Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level two index associated with this subject .. eg 
                 pic slot."
        ::= { jnxIfOtnODUkCfgEntry 3 }

    jnxIfOtnODUkCfgL3Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level three index associated with this subject..
                  eg port.
                "
        ::= { jnxIfOtnODUkCfgEntry 4 }


     jnxIfOtnODUkAPSPCC0 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Read/Write APS PCC byte 0 for this ODUk only.
                "
        ::= { jnxIfOtnODUkCfgEntry 5 }

     jnxIfOtnODUkAPSPCC1 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Read/Write APS PCC byte 1 for this ODUk only.
                "
        ::= { jnxIfOtnODUkCfgEntry 6 }

     jnxIfOtnODUkAPSPCC2 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Read/Write APS PCC byte 2 for this ODUk only.
                "
        ::= { jnxIfOtnODUkCfgEntry 7 }

     jnxIfOtnODUkAPSPCC3 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Read/Write APS PCC byte 3 for this ODUk only.
                "
        ::= { jnxIfOtnODUkCfgEntry 8 }

     jnxIfOtnODUkPayloadType OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Read/Write Payload Type for ODUk only.
                "
        ::= { jnxIfOtnODUkCfgEntry 9 }

    jnxIfOtnODUkTIMActEnabled OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                 Indicates whether the Trace Identifier Mismatch (TIM)
                 Consequent Action function is enabled.
                 The default value of this object is false(2).
                "
        ::= { jnxIfOtnODUkCfgEntry 10 }

    jnxIfOtnODUkTxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..64))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  The Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnODUkCfgEntry 11 }

    jnxIfOtnODUkRxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(64))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "
                  The Receive Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnODUkCfgEntry 12 }

    jnxIfOtnODUkExpectedRxSapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     
                "
                  Expected receive SAPI for this layer.
                "
        ::= { jnxIfOtnODUkCfgEntry 13 }

    jnxIfOtnODUkExpectedRxDapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Expected receive DAPI for this layer.
                "
        ::= { jnxIfOtnODUkCfgEntry 14 }

    jnxIfOtnODUkStatus OBJECT-TYPE
        SYNTAX          BITS {
                            ais(0),
                            bdi(1),
                            iae(2),
                            ttim(3),
                            sf(4),
                            sd(5),
                            biae(6),
                            tsf(7),
                            ssf(8),
                            csf(9),
                            oci(10),
                            lck(11),
                            ltc(12),
                            ptm(13)
                        }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The  status at the ODUk layer
                 Only some of these alarms are valid for the TCM layer
                "
        ::= { jnxIfOtnODUkCfgEntry 15 }

     jnxIfOtnODUkRxPayloadType OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "
                  Receive  Payload Type for ODUk only.
                "
        ::= { jnxIfOtnODUkCfgEntry 16 }

    jnxIfOtnODUkTxSapiTTIFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnODUkCfgEntry 17 }

    jnxIfOtnODUkTxDapiTTIFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnODUkCfgEntry 18 }

    jnxIfOtnODUkExpectedRxSapiFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnODUkCfgEntry 19 }

    jnxIfOtnODUkExpectedRxDapiFstByteNul OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                " This will fill the first byte of TTI with all zero 
                  as per the G.709 recommendation.
                "
        ::= { jnxIfOtnODUkCfgEntry 20 }

--
-- TCM Config Table
--


jnxIfOtnTcmCfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnTcmCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Information about the Otn TCM config table. "
        ::= { jnxIfOtn 4 }

jnxIfOtnTcmCfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnTcmCfgEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that contains information about the
                  Otn Tcm config.
                 "
        INDEX   { jnxIfOtnTcmCfgContainerIndex, jnxIfOtnTcmCfgL1Index,
                  jnxIfOtnTcmCfgL2Index, jnxIfOtnTcmCfgL3Index,
                  jnxIfOtnTcmCfgLevel
                 }
        ::= { jnxIfOtnTcmCfgTable 1 }


JnxIfOtnTcmCfgEntry ::=
    SEQUENCE {
            jnxIfOtnTcmCfgContainerIndex
                                  Integer32,
            jnxIfOtnTcmCfgL1Index
                                  Integer32,
            jnxIfOtnTcmCfgL2Index
                                  Integer32,
            jnxIfOtnTcmCfgL3Index
                                  Integer32,
            jnxIfOtnTcmCfgLevel
                                  Integer32,
            jnxIfOtnTCMEnable
                                  TruthValue,
            jnxIfOtnTcmTxTTI
                                  OCTET STRING,
            jnxIfOtnTcmRxTTI
                                  OCTET STRING,
            jnxIfOtnTcmExpectedRxSapi
                                  OCTET STRING,
            jnxIfOtnTcmExpectedRxDapi
                                  OCTET STRING,
            jnxIfOtnTcmStatus
                                  BITS
     }

    jnxIfOtnTcmCfgContainerIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The associated jnxContentsContainerIndex  - eg shelf."
        ::= { jnxIfOtnTcmCfgEntry 1 }

    jnxIfOtnTcmCfgL1Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
               "The level one index associated with this subject ... eg fpc
                slot."
        ::= { jnxIfOtnTcmCfgEntry 2 }

    jnxIfOtnTcmCfgL2Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level two index associated with this subject .. eg pic
                 slot."
        ::= { jnxIfOtnTcmCfgEntry 3 }

    jnxIfOtnTcmCfgL3Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level three index associated with this subject..
                 eg port.
                "
        ::= { jnxIfOtnTcmCfgEntry 4 }


     jnxIfOtnTcmCfgLevel OBJECT-TYPE
        SYNTAX          Integer32 (1..6)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    The TCM level for the Table
                "
        ::= { jnxIfOtnTcmCfgEntry 5 }

     jnxIfOtnTCMEnable OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   Enable this TCM layer (only for TCM layers)
                "
        ::= { jnxIfOtnTcmCfgEntry 6 }


    jnxIfOtnTcmTxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..64))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  The Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnTcmCfgEntry 7 }

    jnxIfOtnTcmRxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(64))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "
                  The Receive Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnTcmCfgEntry 8 }


    jnxIfOtnTcmExpectedRxSapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Expected receive SAPI for this layer.
                "
        ::= { jnxIfOtnTcmCfgEntry 9 }

    jnxIfOtnTcmExpectedRxDapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Expected receive DAPI for this layer.
                "
        ::= { jnxIfOtnTcmCfgEntry 10 }


    jnxIfOtnTcmStatus OBJECT-TYPE
        SYNTAX          BITS {
                            ais(0),
                            bdi(1),
                            iae(2),
                            ttim(3),
                            biae(6),
                            tsf(7),
                            ssf(8),
                            ltc(9)
                        }

        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "
                 The  status at the TCM layer.
                "
        ::= { jnxIfOtnTcmCfgEntry 11 }




--
-- ODUK Maintainenance/Test table
--
jnxIfOtnODUkTcmTestTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnODUkTcmTestEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Information about the Otn ODUk Test function table. "
        ::= { jnxIfOtn 5 }

jnxIfOtnODUkTcmTestEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnODUkTcmTestEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that contains information about the
                  Otn ODUk Test function.
                 "
        INDEX   { ifIndex, jnxIfOtnODUkTcmTestLayer,
                  jnxIfOtnODUkTcmTestTCMLevel }
        ::= { jnxIfOtnODUkTcmTestTable 1 }

JnxIfOtnODUkTcmTestEntry ::=
    SEQUENCE {
            jnxIfOtnODUkTcmTestLayer
                                  JnxIfOtnLayer,
            jnxIfOtnODUkTcmTestTCMLevel
                                  Integer32,
            jnxIfOtnODUkTcmInsertAis
                                  TruthValue,
            jnxIfOtnODUkTcmInsertLck
                                  TruthValue,
            jnxIfOtnODUkTcmInsertOci
                                  TruthValue,
            jnxIfOtnODUkPayloadPRBS
                                  TruthValue,
            jnxIfOtnODUkPayloadPRBSResult 
                                  OCTET STRING
      }

    jnxIfOtnODUkTcmTestLayer OBJECT-TYPE
        SYNTAX          JnxIfOtnLayer
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    The layer OTU/ODU/TCM layer for the alarm
                "
        ::= { jnxIfOtnODUkTcmTestEntry 1 }

    jnxIfOtnODUkTcmTestTCMLevel OBJECT-TYPE
        SYNTAX          Integer32(0..6)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    For ODUk will be this will be 0
                    If layer is TCM then this will give the TCM
                    level 1..6.
                "
        ::= { jnxIfOtnODUkTcmTestEntry 2 }

     jnxIfOtnODUkTcmInsertAis OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                    Insert ODU Ais into OTN stream.
                "
        ::= { jnxIfOtnODUkTcmTestEntry 3 }

     jnxIfOtnODUkTcmInsertLck OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                    Insert ODU Lck into OTN stream.
                "
        ::= { jnxIfOtnODUkTcmTestEntry 4 }

     jnxIfOtnODUkTcmInsertOci OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                    Insert ODU Oci into OTN stream.
                "
        ::= { jnxIfOtnODUkTcmTestEntry 5 }

     jnxIfOtnODUkPayloadPRBS OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                    Insert Payload PRBS, For ODUK layer and TCM level is 0.
                "
        ::= { jnxIfOtnODUkTcmTestEntry 6 }

     jnxIfOtnODUkPayloadPRBSResult OBJECT-TYPE
        SYNTAX          OCTET STRING
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "
                  Result of the Payload PRBS .
                "
        ::= { jnxIfOtnODUkTcmTestEntry 7 }

--
-- ODUK/TCM Delay Measurement Table
--

jnxIfOtnODUkTcmDMTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnODUkTcmDMEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Table for Otn ODUk/TCM  Delay Measurement config table. "
        ::= { jnxIfOtn 6 }

jnxIfOtnODUkTcmDMEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnODUkTcmDMEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that contains information about the
                  Delay Measurement test table. 
                 "
        INDEX   { ifIndex, jnxIfOtnODUkTcmDMLayer,
                  jnxIfOtnODUkTcmDMLevel
                }
        ::= { jnxIfOtnODUkTcmDMTable 1 }

JnxIfOtnODUkTcmDMEntry ::=
    SEQUENCE {
        jnxIfOtnODUkTcmDMLayer
                     Integer32,
        jnxIfOtnODUkTcmDMLevel
                     Integer32,
        jnxIfOtnDMConnectionMonitoringEndpoint
                     TruthValue,
        jnxIfOtnDMBypass
                     TruthValue,
        jnxIfOtnDMPersistFrames
                     Integer32,
        jnxIfOtnDMEnable
                     TruthValue
    }

    jnxIfOtnODUkTcmDMLayer OBJECT-TYPE
        SYNTAX          JnxIfOtnLayer
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    The layer OTU/ODU/TCM layer for the alarm
                "
        ::= { jnxIfOtnODUkTcmDMEntry 1 }

    jnxIfOtnODUkTcmDMLevel OBJECT-TYPE
        SYNTAX          Integer32(0..6)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    For ODUk will be this will be 0
                    If layer is TCM then this will give the TCM
                    level 1..6.
                "
        ::= { jnxIfOtnODUkTcmDMEntry 2 }

    jnxIfOtnDMConnectionMonitoringEndpoint OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   Originate Connection Monitoring Endpoint for the Delay 
                   Measurement
                "
        ::= { jnxIfOtnODUkTcmDMEntry 3 }

    jnxIfOtnDMBypass OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   Act as tandem, passing Dm value through node
                "
        ::= { jnxIfOtnODUkTcmDMEntry 4 }

    jnxIfOtnDMPersistFrames OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Number of consequtive frames required to declare Dm Complete 
                "
        ::= { jnxIfOtnODUkTcmDMEntry 5 }

    jnxIfOtnDMEnable OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Start/Stop the DM measurement 
                "
        ::= { jnxIfOtnODUkTcmDMEntry 6 }

    jnxIfOtnDMRemoteLoopEnable OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                  Remote Loop Enable/Disable 
                "
        ::= { jnxIfOtnODUkTcmDMEntry 7 }



--
-- Notification Trigger Table
-- 

jnxIfOtnNotificationTrigDefaultHoldtimeUp OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   This object will indicate the time (ms) for the defect to
                   persist before it is declared an alarm.
                "
       ::= { jnxIfOtn 7 } 

jnxIfOtnNotificationTrigDefaultHoldtimeDown OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   This object will indicate the time (ms) for the defect to
                   absent before the alarm is cleared.
                "
       ::= { jnxIfOtn 8 }

jnxIfOtnNotificationTrigTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnNotificationTrigEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Information about the otn Alarm/Alart/Info trigger table. "
        ::= { jnxIfOtn 9 }

jnxIfOtnNotificationTrigEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnNotificationTrigEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that contains information about the Otn
                  Alarm Trigger Table.
                 "
        INDEX   { jnxIfOtnNotificationTrigContainerIndex,
                  jnxIfOtnNotificationTrigL1Index,
                  jnxIfOtnNotificationTrigL2Index,
                  jnxIfOtnNotificationTrigL3Index,
                  jnxIfOtnNotificationTrigLayer,
                  jnxIfOtnNotificationTrigTCMLevel,
                  jnxIfOtnNotificationTrigAlmId }
        ::= { jnxIfOtnNotificationTrigTable 1 }

JnxIfOtnNotificationTrigEntry ::=
    SEQUENCE {
            jnxIfOtnNotificationTrigContainerIndex
                                Integer32,
            jnxIfOtnNotificationTrigL1Index
                                Integer32,
            jnxIfOtnNotificationTrigL2Index       
                                Integer32,
            jnxIfOtnNotificationTrigL3Index       
                                Integer32,
            jnxIfOtnNotificationTrigLayer         
                                JnxIfOtnLayer,
            jnxIfOtnNotificationTrigTCMLevel      
                                Integer32,
            jnxIfOtnNotificationTrigAlmId           
                                Integer32,
            jnxIfOtnNotificationTrigSeverity       
                                JnxIfOtnSeverity,
            jnxIfOtnNotificationTrigIgnore         
                                TruthValue,
            jnxIfOtnNotificationTrigHoldtimeUp    
                                Integer32,
            jnxIfOtnNotificationTrigHoldtimeDown     
                                Integer32,
            jnxIfOtnTrigServiceStateAction       
                                JnxIfOtnServiceStateAction
    }

    jnxIfOtnNotificationTrigContainerIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The associated jnxContentsContainerIndex  - eg shelf."
        ::= { jnxIfOtnNotificationTrigEntry 1 }

    jnxIfOtnNotificationTrigL1Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level one index associated with this subject ... eg fpc
                 slot."
        ::= { jnxIfOtnNotificationTrigEntry 2 }

    jnxIfOtnNotificationTrigL2Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level two index associated with this subject .. eg pic
                 slot."
        ::= { jnxIfOtnNotificationTrigEntry 3 }

    jnxIfOtnNotificationTrigL3Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The level three index associated with this subject..
                 eg port.
                "
        ::= { jnxIfOtnNotificationTrigEntry 4 }

    jnxIfOtnNotificationTrigLayer OBJECT-TYPE
        SYNTAX          JnxIfOtnLayer 
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    The layer OTU/ODU/TCM layer for the alarm
                "
        ::= { jnxIfOtnNotificationTrigEntry 5 }

    jnxIfOtnNotificationTrigTCMLevel OBJECT-TYPE
        SYNTAX          Integer32(0..6)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    For OCh/OTUk/ODUk will be this will be 0
                    If layer is TCM then this will give the TCM
                    level 1..6. 
                "
        ::= { jnxIfOtnNotificationTrigEntry 6 }

    jnxIfOtnNotificationTrigAlmId OBJECT-TYPE
        SYNTAX          Integer32(0..255) 
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "
                    This will be the ID of Alarm for that layer 
                    'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'.
                "
        ::= { jnxIfOtnNotificationTrigEntry 7 }

    jnxIfOtnNotificationTrigSeverity OBJECT-TYPE
        SYNTAX          JnxIfOtnSeverity
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                 This will be the Severity of the Notification for that layer.
                "
        ::= { jnxIfOtnNotificationTrigEntry 8 }

    jnxIfOtnNotificationTrigIgnore OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   This object will ignore the alarm when set. 
                "
        ::= { jnxIfOtnNotificationTrigEntry 9 }


    jnxIfOtnNotificationTrigHoldtimeUp OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   This object will indicate the time (ms) for the defect to 
                   persist before it is declared an alarm.
                "
        ::= { jnxIfOtnNotificationTrigEntry 10 }

    jnxIfOtnNotificationTrigHoldtimeDown OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "
                   This object will indicate the time (ms) for the defect is
                   absent before the alarm is cleared.
                "
        ::= { jnxIfOtnNotificationTrigEntry 11 }

    jnxIfOtnTrigServiceStateAction OBJECT-TYPE
        SYNTAX          JnxIfOtnServiceStateAction
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "
                   This will indicate whether this alarm is service affecting
                   or not .
                "
        ::= { jnxIfOtnNotificationTrigEntry 12 }



-- Clear for all Performance monitoring counters on this interface
--
jnxOtnClearAllPMs OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                " To clear all Performance monitoring counters on OTN
                  interfaces "
        ::= { jnxIfOtn  10 }

jnxOtnClearInterfacePMs OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                " To clear all Performance monitoring counters on this OTN
                  interfaces "
        ::= { jnxIfOtn  11 }

jnxOtnClearInterfaceCurrentPM OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                " To clear the current Performance monitoring counters on 
                  this OTN interfaces "
        ::= { jnxIfOtn  12 }


-- Clear PM's for Interfaces
jnxOtnClearIfPMsTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxOtnClearIfPMsEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                " To clear OTN Performance monitoring counters on this OTN
                  interfaces "
        ::= { jnxIfOtn  13 }

jnxOtnClearIfPMsEntry OBJECT-TYPE
        SYNTAX     JnxOtnClearIfPMsEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "A conceptual row that s used to clear the OTN PM Table."
        INDEX   { ifIndex }
        ::= { jnxOtnClearIfPMsTable 1 }

JnxOtnClearIfPMsEntry ::=
    SEQUENCE {
            jnxOtnClearCurrent
                             TruthValue,
            jnxOtnClearInterfaceInterval
                             TruthValue,
            jnxOtnClearInterfaceDay
                             TruthValue,
            jnxOtnClearInterfaceAll
                             TruthValue
    }

    jnxOtnClearCurrent OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
               " 1- to clear all the current OTN PM's for this interface
               "
        ::= { jnxOtnClearIfPMsEntry 1 }

    jnxOtnClearInterfaceInterval OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
               " 1- to clear all the OTN PM's intervals(1-96) for this
                 interface
               "
        ::= { jnxOtnClearIfPMsEntry 2 }

    jnxOtnClearInterfaceDay OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
               " 1 - to clear all the Current Day and Previous Day OTN PM's
                     for this interface
               "
        ::= { jnxOtnClearIfPMsEntry 3 }

    jnxOtnClearInterfaceAll OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
               " 1 - to clear all the OTN PM's for this interface
               "
        ::= { jnxOtnClearIfPMsEntry 4 }



-- Otn OCh2 options
--
jnxIfOtnOCh2CfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnOCh2CfgEntry
        MAX-ACCESS not-accessible
        STATUS    obsolete 
        DESCRIPTION
                "Table was for 48x10G/12x40G gingerALE PIC in 10G mode. 
                 It is not supported hence marked as obsolete.
                 Information about the Otn OCh2 Config Table. "
        ::= { jnxIfOtnOCh2 1 }

jnxIfOtnOCh2CfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnOCh2CfgEntry
        MAX-ACCESS not-accessible
        STATUS     obsolete
        DESCRIPTION
                 "A conceptual row that contains of the Otn OCh2 Config Table."
        INDEX   { jnxIfOtnOCh2CfgContainerIndex, jnxIfOtnOCh2CfgL1Index,
                  jnxIfOtnOCh2CfgL2Index, jnxIfOtnOCh2CfgL3Index,
                  jnxIfOtnOCh2CfgL4Index }
        ::= { jnxIfOtnOCh2CfgTable 1 }

JnxIfOtnOCh2CfgEntry ::=
    SEQUENCE {
            jnxIfOtnOCh2CfgContainerIndex
                          Integer32,
            jnxIfOtnOCh2CfgL1Index 
                          Integer32,
            jnxIfOtnOCh2CfgL2Index 
                          Integer32,
            jnxIfOtnOCh2CfgL3Index 
                          Integer32,
            jnxIfOtnOCh2CfgL4Index 
                          Integer32,
            jnxIfOtnOCh2LocalLoopback
                             TruthValue,
            jnxIfOtnOCh2LineLoopback     
                             TruthValue,
            jnxIfOtnOCh2PayloadLoopback
                             TruthValue,
            jnxIfOtnOCh2AdminState
                             JnxIfAdminStates,
            jnxIfOtnOCh2OperState
                             JnxIfOperStates,
            jnxIfOtnOCh2Index
                             Unsigned32,
            jnxIfOtnOCh2Status
                             BITS,
            jnxIfOtnOCh2PortMode
                             Unsigned32
    }

    jnxIfOtnOCh2CfgContainerIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Container Index associated with the object instance."
        ::= { jnxIfOtnOCh2CfgEntry 1 }

    jnxIfOtnOCh2CfgL1Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "FPC slot number of the interface."
        ::= { jnxIfOtnOCh2CfgEntry 2 }

    jnxIfOtnOCh2CfgL2Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "PIC slot number of the interface."
        ::= { jnxIfOtnOCh2CfgEntry 3 }        

    jnxIfOtnOCh2CfgL3Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Port number of the interface."
        ::= { jnxIfOtnOCh2CfgEntry 4 }

    jnxIfOtnOCh2CfgL4Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Sub-Port number of the interface."
        ::= { jnxIfOtnOCh2CfgEntry 5 }

    jnxIfOtnOCh2LocalLoopback OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "This is the local loopback at the Line (after the optics)."
        ::= { jnxIfOtnOCh2CfgEntry 6 }

    jnxIfOtnOCh2LineLoopback OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "This is the line loopback at the Line."
        ::= { jnxIfOtnOCh2CfgEntry 7 }

    jnxIfOtnOCh2PayloadLoopback OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "This is the Payload loopback before the optics."
        ::= { jnxIfOtnOCh2CfgEntry 8 }

    jnxIfOtnOCh2AdminState OBJECT-TYPE
        SYNTAX          JnxIfAdminStates
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "The Admin state of this interface"
        ::= { jnxIfOtnOCh2CfgEntry 9 }

    jnxIfOtnOCh2OperState OBJECT-TYPE
        SYNTAX          JnxIfOperStates
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "The operational state of this interface"
        ::= { jnxIfOtnOCh2CfgEntry 10 }

    jnxIfOtnOCh2Index OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "The interface ifIndex of this interface"
        ::= { jnxIfOtnOCh2CfgEntry 11 }

    jnxIfOtnOCh2Status OBJECT-TYPE
        SYNTAX          BITS {
                            los(0),
                            lof(1),
                            lom(2),
                            wavelengthlockerr(3)
                        }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The interface status at the OCh layer."
        ::= { jnxIfOtnOCh2CfgEntry 12 }

    jnxIfOtnOCh2PortMode OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "The Port Mode for this interface
                 0  -  default (not applicable)
                 1  -  lan
                 2  -  wan 
                 3  -  gfp
                "
        ::= { jnxIfOtnOCh2CfgEntry 13 }

-- otn ch2 interface options 
--
jnxIfOtnOCh2OTUkCfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnOCh2OTUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     obsolete
        DESCRIPTION
                "Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
                 It is not supported hence marked as obsolete.
                 Information about the Otn OCh2 OTUk config table. "
        ::= { jnxIfOtnOCh2 2 }

jnxIfOtnOCh2OTUkCfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnOCh2OTUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     obsolete
        DESCRIPTION
                 "A conceptual row that contains the Otn OCh2 OTUk config table.
                 "
        INDEX   { jnxIfOtnOCh2OTUkCfgContIndx, jnxIfOtnOCh2OTUkCfgL1Index,
                  jnxIfOtnOCh2OTUkCfgL2Index, jnxIfOtnOCh2OTUkCfgL3Index,
                  jnxIfOtnOCh2OTUkCfgL4Index }
        ::= { jnxIfOtnOCh2OTUkCfgTable 1 }

JnxIfOtnOCh2OTUkCfgEntry ::=
    SEQUENCE {
            jnxIfOtnOCh2OTUkCfgContIndx 
                                  Integer32,
            jnxIfOtnOCh2OTUkCfgL1Index 
                                  Integer32,
            jnxIfOtnOCh2OTUkCfgL2Index 
                                  Integer32,
            jnxIfOtnOCh2OTUkCfgL3Index 
                                  Integer32,
            jnxIfOtnOCh2OTUkCfgL4Index 
                                  Integer32,
            jnxIfOtnOCh2OTUkCfgRate
                                  JnxIfOtnRate,
            jnxIfOtnOCh2OTUkCfgFecMode
                                  JnxIfOtnFecType,
            jnxIfOtnOCh2OTUkEnAutoFrrByteIns
                                  TruthValue,
            jnxIfOtnOCh2OTUkEnBERFrrSupport
                                  TruthValue,
            jnxIfOtnOCh2OTUkPreFecBERThMant
                                  Integer32,
            jnxIfOtnOCh2OTUkPreFecBERThExpo
                                  Integer32,
            jnxIfOtnOCh2OTUkPreFecBERThTime
                                  Integer32,
            jnxIfOtnOCh2OTUkTIMActEnabled
                                  TruthValue,
            jnxIfOtnOCh2OTUkTxTTI
                                  OCTET STRING,
            jnxIfOtnOCh2OTUkRxTTI
                                  OCTET STRING,
            jnxIfOtnOCh2OTUkExpectedRxSapi
                                  OCTET STRING,
            jnxIfOtnOCh2OTUkExpectedRxDapi
                                  OCTET STRING,
            jnxIfOtnOCh2OTUkStatus
                                  BITS,
            jnxIfOtnOCh2OTUkPreFecBERThClrMn
                                  Integer32,
            jnxIfOtnOCh2OTUkPreFecBERThClrEx
                                  Integer32
    }

    jnxIfOtnOCh2OTUkCfgContIndx OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Container Index associated with the object instance. "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 1 }

    jnxIfOtnOCh2OTUkCfgL1Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "FPC slot number of the interface. "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 2 }

    jnxIfOtnOCh2OTUkCfgL2Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "PIC slot number of the interface. "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 3 }

    jnxIfOtnOCh2OTUkCfgL3Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Port number of the interface. "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 4 }

    jnxIfOtnOCh2OTUkCfgL4Index OBJECT-TYPE
        SYNTAX          Integer32 (1..1024)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Port number of the interface. "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 5 }

    jnxIfOtnOCh2OTUkCfgRate OBJECT-TYPE
        SYNTAX          JnxIfOtnRate
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This is the rate for the interface and the rates depend
                  on the interface/fru type. 
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 6 }

    jnxIfOtnOCh2OTUkCfgFecMode OBJECT-TYPE
        SYNTAX          JnxIfOtnFecType
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This is the Fec type in the OTU frame and the selection
                  depends on the interface/fru type.  "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 7 }

    jnxIfOtnOCh2OTUkEnAutoFrrByteIns OBJECT-TYPE
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This will enable/disable the automatic insertion of 
                  the frr SF/SD byte in the overhead bytes(RES) "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 8 }

    jnxIfOtnOCh2OTUkEnBERFrrSupport OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This will enable/disable the FRR support for BER "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 9 }

    jnxIfOtnOCh2OTUkPreFecBERThMant OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This will set the BER threshold(mantissa), which when
                  crossed will trigger Signal Degrade.
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 10 }

    jnxIfOtnOCh2OTUkPreFecBERThExpo OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This will set the BER threshold(exponent), which when
                  crossed will trigger Signal Degrade.
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 11 }

    jnxIfOtnOCh2OTUkPreFecBERThTime OBJECT-TYPE
        SYNTAX          Integer32
        UNITS           "ms"
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " 
                  The collection times (1ms - 1sec) to calculate the BER.
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 12 }

    jnxIfOtnOCh2OTUkTIMActEnabled OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                 Indicates whether the Trace Identifier Mismatch (TIM)
                 Consequent Action function is enabled.
                 The default value of this object is false(2).
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 13 }

    jnxIfOtnOCh2OTUkTxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..64))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " 
                  The Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined  
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 14 }

    jnxIfOtnOCh2OTUkRxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(64))
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "
                  The Receive Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 15 }

    jnxIfOtnOCh2OTUkExpectedRxSapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Expected receive SAPI.
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 16 }

    jnxIfOtnOCh2OTUkExpectedRxDapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Expected receive DAPI. 
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 17 }

    jnxIfOtnOCh2OTUkStatus OBJECT-TYPE
        SYNTAX          BITS {
                            ais(0),
                            bdi(1),
                            iae(2),
                            ttim(3),
                            sf(4),
                            sd(5),
                            biae(6),
                            tsf(7),
                            ssf(8),
                            fecexcessive(9),
                            fecdegrade(10)
                        }
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "The interface status at the OTUk layer."
        ::= { jnxIfOtnOCh2OTUkCfgEntry 18 }

    jnxIfOtnOCh2OTUkPreFecBERThClrMn OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This will set the BER threshold(mantissa) for clear signal
                  degrade condition, which signal degrade condition will be
                  cleared when Pre-Fec error count is below the clear
                  threshold error count.
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 19 }

    jnxIfOtnOCh2OTUkPreFecBERThClrEx OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                " This will set the BER threshold(exponent) for clear signal
                  degrade condition, which signal degrade condition will be
                  cleared when Pre-Fec error count is below the clear threshold
                  error count.
                "
        ::= { jnxIfOtnOCh2OTUkCfgEntry 20 }

--
-- ODUk config table
--

jnxIfOtnOCh2ODUkCfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnOCh2ODUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     obsolete
        DESCRIPTION
                "Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
                 It is not supported hence marked as obsolete.
                 Information about the Otn ODUk config table. "
        ::= { jnxIfOtnOCh2 3 }

jnxIfOtnOCh2ODUkCfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnOCh2ODUkCfgEntry
        MAX-ACCESS not-accessible
        STATUS     obsolete
        DESCRIPTION
                 "A conceptual row that contains information about the 
                  Otn ODUk config.
                 "
        INDEX   { jnxIfOtnOCh2ODUkCfgContIndx, jnxIfOtnOCh2ODUkCfgL1Index,
                  jnxIfOtnOCh2ODUkCfgL2Index, jnxIfOtnOCh2ODUkCfgL3Index,
                  jnxIfOtnOCh2ODUkCfgL4Index }
        ::= { jnxIfOtnOCh2ODUkCfgTable 1 }

JnxIfOtnOCh2ODUkCfgEntry ::=
    SEQUENCE {
            jnxIfOtnOCh2ODUkCfgContIndx
                                  Integer32,
            jnxIfOtnOCh2ODUkCfgL1Index
                                  Integer32,
            jnxIfOtnOCh2ODUkCfgL2Index
                                  Integer32,
            jnxIfOtnOCh2ODUkCfgL3Index
                                  Integer32,
            jnxIfOtnOCh2ODUkCfgL4Index
                                  Integer32,
            jnxIfOtnOCh2ODUkAPSPCC0
                                  Integer32,
            jnxIfOtnOCh2ODUkAPSPCC1
                                  Integer32,
            jnxIfOtnOCh2ODUkAPSPCC2
                                  Integer32,
            jnxIfOtnOCh2ODUkAPSPCC3
                                  Integer32,
            jnxIfOtnOCh2ODUkPayloadType
                                  Integer32,
            jnxIfOtnOCh2ODUkTIMActEnabled
                                  TruthValue,
            jnxIfOtnOCh2ODUkTxTTI
                                  OCTET STRING,
            jnxIfOtnOCh2ODUkRxTTI
                                  OCTET STRING,
            jnxIfOtnOCh2ODUkExpectedRxSapi
                                  OCTET STRING,
            jnxIfOtnOCh2ODUkExpectedRxDapi
                                  OCTET STRING,
            jnxIfOtnOCh2ODUkStatus
                                  BITS,
            jnxIfOtnOCh2ODUkRxPayloadType
                                  Integer32
     }

    jnxIfOtnOCh2ODUkCfgContIndx OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
               "Container Index associated with the Object Instance. "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 1 }

    jnxIfOtnOCh2ODUkCfgL1Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
               "FPC slot number of the interface. "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 2 }

    jnxIfOtnOCh2ODUkCfgL2Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
               "PIC slot number of the interface. "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 3 }

    jnxIfOtnOCh2ODUkCfgL3Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
               "Port number of the interface. "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 4 }

    jnxIfOtnOCh2ODUkCfgL4Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
               "Sub-Port number of the interface. "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 5 }

     jnxIfOtnOCh2ODUkAPSPCC0 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Read/Write APS PCC byte 0 for this ODUk only.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 6 }

     jnxIfOtnOCh2ODUkAPSPCC1 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Read/Write APS PCC byte 1 for this ODUk only.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 7 }

     jnxIfOtnOCh2ODUkAPSPCC2 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Read/Write APS PCC byte 2 for this ODUk only.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 8 }

     jnxIfOtnOCh2ODUkAPSPCC3 OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Read/Write APS PCC byte 3 for this ODUk only.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 9 }

     jnxIfOtnOCh2ODUkPayloadType OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Read/Write Payload Type for ODUk only.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 10 }

    jnxIfOtnOCh2ODUkTIMActEnabled OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                 Indicates whether the Trace Identifier Mismatch (TIM)
                 Consequent Action function is enabled.
                 The default value of this object is false(2).
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 11 }

    jnxIfOtnOCh2ODUkTxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..64))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  The Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 12 }

    jnxIfOtnOCh2ODUkRxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(64))
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "
                  The Receive Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 13 }

    jnxIfOtnOCh2ODUkExpectedRxSapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION     
                "
                  Expected receive SAPI for this layer.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 14 }

    jnxIfOtnOCh2ODUkExpectedRxDapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Expected receive DAPI for this layer.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 15 }

    jnxIfOtnOCh2ODUkStatus OBJECT-TYPE
        SYNTAX          BITS {
                            ais(0),
                            bdi(1),
                            iae(2),
                            ttim(3),
                            sf(4),
                            sd(5),
                            biae(6),
                            tsf(7),
                            ssf(8),
                            csf(9),
                            oci(10),
                            lck(11),
                            ltc(12),
                            ptm(13)
                        }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The  status at the ODUk layer
                 Only some of these alarms are valid for the TCM layer
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 16 }

     jnxIfOtnOCh2ODUkRxPayloadType OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "
                  Receive  Payload Type for ODUk only.
                "
        ::= { jnxIfOtnOCh2ODUkCfgEntry 17 }

--
-- TCM Config Table
--

jnxIfOtnOCh2TcmCfgTable   OBJECT-TYPE
        SYNTAX     SEQUENCE OF JnxIfOtnOCh2TcmCfgEntry
        MAX-ACCESS not-accessible
        STATUS     obsolete
        DESCRIPTION
                "Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
                 It is not supported hence marked as obsolete.
                 Information about the Otn TCM config table. "
        ::= { jnxIfOtnOCh2 4 }

jnxIfOtnOCh2TcmCfgEntry OBJECT-TYPE
        SYNTAX     JnxIfOtnOCh2TcmCfgEntry
        MAX-ACCESS not-accessible
        STATUS     obsolete
        DESCRIPTION
                 "A conceptual row that contains information about the
                  Otn Tcm config.
                 "
        INDEX   { jnxIfOtnOCh2TcmCfgContIndx, jnxIfOtnOCh2TcmCfgL1Index,
                  jnxIfOtnOCh2TcmCfgL2Index, jnxIfOtnOCh2TcmCfgL3Index,
                  jnxIfOtnOCh2TcmCfgL4Index, jnxIfOtnOCh2TcmCfgLevel }
        ::= { jnxIfOtnOCh2TcmCfgTable 1 }


JnxIfOtnOCh2TcmCfgEntry ::=
    SEQUENCE {
            jnxIfOtnOCh2TcmCfgContIndx
                                  Integer32,
            jnxIfOtnOCh2TcmCfgL1Index 
                                  Integer32,             
            jnxIfOtnOCh2TcmCfgL2Index 
                                  Integer32,
            jnxIfOtnOCh2TcmCfgL3Index 
                                  Integer32,
            jnxIfOtnOCh2TcmCfgL4Index 
                                  Integer32,
            jnxIfOtnOCh2TcmCfgLevel
                                  Integer32,
            jnxIfOtnOCh2TCMEnable
                                  TruthValue,
            jnxIfOtnOCh2TcmTxTTI
                                  OCTET STRING,
            jnxIfOtnOCh2TcmRxTTI
                                  OCTET STRING,
            jnxIfOtnOCh2TcmExpectedRxSapi
                                  OCTET STRING,
            jnxIfOtnOCh2TcmExpectedRxDapi
                                  OCTET STRING,
            jnxIfOtnOCh2TcmStatus
                                  BITS
     }

    jnxIfOtnOCh2TcmCfgContIndx OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Container Index associated with the object."
        ::= { jnxIfOtnOCh2TcmCfgEntry 1 }

    jnxIfOtnOCh2TcmCfgL1Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "FPC slot number of the interface."
        ::= { jnxIfOtnOCh2TcmCfgEntry 2 }

    jnxIfOtnOCh2TcmCfgL2Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "PIC slot number of the interface."
        ::= { jnxIfOtnOCh2TcmCfgEntry 3 }

    jnxIfOtnOCh2TcmCfgL3Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Port number of the interface."
        ::= { jnxIfOtnOCh2TcmCfgEntry 4 }

    jnxIfOtnOCh2TcmCfgL4Index OBJECT-TYPE
        SYNTAX          Integer32(0..255)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "Sub-Port number of the interface."
        ::= { jnxIfOtnOCh2TcmCfgEntry 5 }

     jnxIfOtnOCh2TcmCfgLevel OBJECT-TYPE
        SYNTAX          Integer32 (1..6)
        MAX-ACCESS      not-accessible
        STATUS          obsolete
        DESCRIPTION
                "
                    The TCM level for the Table
                "
        ::= { jnxIfOtnOCh2TcmCfgEntry 6 }

     jnxIfOtnOCh2TCMEnable OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                   Enable this TCM layer (only for TCM layers)
                "
        ::= { jnxIfOtnOCh2TcmCfgEntry 7 }


    jnxIfOtnOCh2TcmTxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..64))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  The Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnOCh2TcmCfgEntry 8 }

    jnxIfOtnOCh2TcmRxTTI OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(64))
        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "
                  The Receive Trace TTI  SAPI 0..15, DAPI 16..31
                  32 ..63 user defined for this layer.
                "
        ::= { jnxIfOtnOCh2TcmCfgEntry 9 }


    jnxIfOtnOCh2TcmExpectedRxSapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Expected receive SAPI for this layer.
                "
        ::= { jnxIfOtnOCh2TcmCfgEntry 10 }

    jnxIfOtnOCh2TcmExpectedRxDapi OBJECT-TYPE
        SYNTAX          OCTET STRING (SIZE(0..16))
        MAX-ACCESS      read-write
        STATUS          obsolete
        DESCRIPTION
                "
                  Expected receive DAPI for this layer.
                "
        ::= { jnxIfOtnOCh2TcmCfgEntry 11 }


    jnxIfOtnOCh2TcmStatus OBJECT-TYPE
        SYNTAX          BITS {
                            ais(0),
                            bdi(1),
                            iae(2),
                            ttim(3),
                            biae(6),
                            tsf(7),
                            ssf(8),
                            ltc(9)
                        }

        MAX-ACCESS      read-only
        STATUS          obsolete
        DESCRIPTION
                "
                 The  status at the TCM layer.
                "
        ::= { jnxIfOtnOCh2TcmCfgEntry 12 }

--
-- Configuration Management Notifications
--

jnxIfOtnNotificationPrefix   OBJECT IDENTIFIER ::= { jnxIfOtnNotifications 0 }

jnxIfOtnNotificationAdminStatus NOTIFICATION-TYPE
        OBJECTS {
                  ifDescr,
                  jnxIfOtnAdminState
                }
        STATUS  current
        DESCRIPTION
                "Notification of the admin state of the otn interface."
        ::= { jnxIfOtnNotificationPrefix 1 }

jnxIfOtnNotificationOperStatus NOTIFICATION-TYPE
        OBJECTS {
                  ifDescr,
                  jnxIfOtnOperState
                }
        STATUS  current
        DESCRIPTION
                "Notification of operational state of the otn interface"
        ::= { jnxIfOtnNotificationPrefix 2 }

END