path: root/MIBS/junose/Juniper-SNMP-MIB

-- *****************************************************************************
-- Juniper-SNMP-MIB
--
-- Juniper Networks Enterprise MIB
--   SNMP MIB
--
-- Copyright (c) 1998, 1999 Redstone Communications, Inc.
-- Copyright (c) 2000, 2001 Unisphere Networks, Inc.
-- Copyright (c) 2002, 2004 Juniper Networks, Inc.
-- Copyright (c) 2005, 2006 Juniper Networks, Inc.
-- Copyright (c) 2007, 2008 Juniper Networks, Inc.
--   All Rights Reserved.
-- *****************************************************************************

Juniper-SNMP-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, IpAddress, Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, RowStatus, TruthValue
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    JuniEnable
        FROM Juniper-TC
    juniMibs
        FROM Juniper-MIBs;

juniSnmpMIB  MODULE-IDENTITY
    LAST-UPDATED "200809300659Z"  -- 30-Sep-08 12:29 PM EST
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
        "       Juniper Networks, Inc.
        Postal: 10 Technology Park Drive
                Westford, MA  01886-3146
                USA
        Tel:    +1 978 589 5800
        Email:  mib@Juniper.net"
    DESCRIPTION
        "MIB objects for configuring SNMP-based management access into Juniper
        E-series products."
    -- Revision History
    REVISION    "200809300659Z"  -- 30-Sep-08 12:29 PM EST  - JUNOSe 10.2
    DESCRIPTION
        "Added juniSnmpIntfCompTable. This provides option for interface 
         compression based on table type. The behavior of 
         juniSnmpInterfaceCompress scalars get modified becuase of this."
    REVISION    "200804031029Z"  -- 03-Apr-08 03:59 PM EST  - JUNOSe 9.3
    DESCRIPTION
        "Added juniSnmpTrapSeverityFilterTable.
        Added support for more traps in JuniSnmpTrapMask textual convention."
    REVISION    "200609180809Z"  -- 18-Sep-06 04:09 AM EDT  - JUNOSe 8.2
    DESCRIPTION
        "Added support for mrouter  Traps."
    REVISION    "200604261349Z"  -- 26-Apr-06 09:49 AM EDT  - JUNOSe 8.1
    DESCRIPTION
        "Updated JuniSnmpTrapMask textual convention to support 64 trap 
        categories."
	REVISION    "200601010000Z"  -- 01-Jan-06 00:00 AM EDT  - JUNOSe 7.3
    DESCRIPTION
        "Added support for DOS Protection Traps."
    REVISION    "200506231349Z"  -- 23-Jun-05 09:49 AM EDT  - JUNOSe 7.2
    DESCRIPTION
        "Added support for dynamic SNMP MIB views and secure traps."
    REVISION    "200505122153Z"  -- 12-May-05 05:53 PM EDT  - JUNOSe 7.1
    DESCRIPTION
        "RLI 1925: Added support for ip traps."
    REVISION    "200406231349Z"  -- 23-Jun-04 09:49 AM EDT  - JUNOSe 6.1
    DESCRIPTION
        "RLI 1684: Added support for route table traps."
    REVISION    "200401051609Z"  -- 05-Jan-04 11:09 AM EST  - JUNOSe 5.3
    DESCRIPTION
        "Added support for DHCP traps."
    REVISION    "200312101500Z"  -- 10-Dec-03 10:00 AM EST  - JUNOSe 5.1
    DESCRIPTION
        "Added juniSnmpManagementApplicationTable and juniSnmpAccessPermission.
         Added support for PIM and Disman Event traps."
    REVISION    "200302052224Z"  -- 05-Feb-03 05:24 PM EST  - JUNOSe 5.0
    DESCRIPTION
        "Replaced Unisphere names with Juniper names."
    REVISION    "200211201440Z"  -- 20-Nov-02 09:40 AM EST  - JUNOSe 4.1
    DESCRIPTION
        "Added support for SONET layer, NTP and RADIUS client traps.
         Added support for ping time window and notification log data inclusion
         in trap varbinds."
    REVISION    "200208152018Z"  -- 15-Aug-02 04:18 PM EDT  - JUNOSe 4.0
    DESCRIPTION
        "Added support for SNMPv3 trap."
    REVISION    "200208141909Z"  -- 14-Aug-02 03:09 PM EDT  - JUNOSe 3.4
    DESCRIPTION
        "Added support for proxy enable/disable feature.
         Added support for the VRRP trap catagory."
    REVISION    "200111071709Z"  -- 07-Nov-01 12:09 PM EST  - JUNOSe 3.3
    DESCRIPTION
        "Added support for interface compress.
            New textual convention:
                JuniSnmpIntfCompRestrictedMask
            New objects:
                juniSnmpIntfCompCompressed
                juniSnmpIntfCompEnhanced
                juniSnmpIntfCompEnhancedDisplay
                juniSnmpIntfCompRestricted
                juniSnmpIntfCompRestrictedDisplay
            Obsoleted object:
                juniSnmpInterfaceMode
        Added support for trap severities and trap severity filtering at the
        global and host levels.
            New textual convention:
                JuniTrapSeverity
            New objects:
                juniSnmpTrapHostDiscards
                juniSnmpTrapHostSeverityFilter
                juniSnmpTrapTrapSeverity
                juniSnmpTrapGlobalDiscards
                juniSnmpTrapGlobalSeverityFilter"
    REVISION    "200111071500Z"  -- 07-Nov-01 10:00 AM EST  - JUNOSe 3.2
    DESCRIPTION
        "Added support for DVMRP and local address pool and ATM ping trap
        categories."
    REVISION    "200105081206Z"  -- 08-May-01 08:06 AM EDT  - JUNOSe 3.0
    DESCRIPTION
        "Make it SMIv2 conformant."
    REVISION    "200008020000Z"  --  2-Aug-00               - JUNOSe 2.3
    DESCRIPTION
        "Added juniSnmpInterfaceMode."
    REVISION    "200005090000Z"  --  9-May-00               - JUNOSe 2.0
    DESCRIPTION
        "Added View support.
         Added Named Access List support."
    REVISION    "9902170000Z"    -- 17-Feb-99               - JUNOSe 1.0
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { juniMibs 16 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
JuniSnmpCommunityName ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "31a"
    STATUS      current
    DESCRIPTION
        "An SNMP community name.  Represents textual information taken from the
        NVT ASCII character set.  The character repertoire of the string is
        restricted to printable, non-whitespace characters (codes 33 through
        126)."
    REFERENCE
        "RFC 854: NVT ASCII character set."
    SYNTAX      OCTET STRING (SIZE(1..31))

JuniSnmpAccessListName ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "31a"
    STATUS      current
    DESCRIPTION
        "An IP Access List name.  Represents textual information taken from the
        NVT ASCII character set.  The character repertoire of the string is
        restricted to printable, non-whitespace characters (codes 33 through
        126)."
    REFERENCE
        "RFC 854: NVT ASCII character set."
    SYNTAX      OCTET STRING (SIZE(0..31))

JuniSnmpTrapMask ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This octet string is interpreted as a bit mask, in which each bit
        corresponds to a category of SNMP trap.

        Bit definitions are as follows, where bit 63 is the most significant bit
        of the first octet, and bit 0 is the least significant bit of the eighth
        octet:

        Bit     Category
        -----   -----------------------------------------------
         0      SNMP standard coldStart/warmStart/authenticationFailure traps
         1      Standard linkUp/linkDown traps
         2      Platform inventory traps
         3      Environment (power, temperature, fan and memory) traps
         4      Accounting (bulk statistics) traps
         5      File transfer status trap
         6      BGP traps
         7      Log configuration traps
         8      CLI security alert trap
         9      Ping traps
        10      OSPF traps
        11      TraceRoute traps
        12      Standard DVMRP traps
        13      Proprietary DVMRP trap
        14      Local address pool traps
        15      ATM ping traps
        16      VRRP traps
        17      SONET layer traps
        18      NTP traps
        19      Radius clients trap
        20      DisMan Event traps
        21      DHCP traps
        22      PIM traps
        23      High Availability Redundancy traps
        24      Route Table traps
        25      IP Traps 
        26      Mirror Traps 
        27      Vpn Traps
        28      Bfd Traps
        29      Dos Protection Platform Traps
        30      Mrouter Traps
        31      Ldp Traps
        32      Mobile IPv4 Traps
        33      ISSU Traps
        34-63   Undefined."

    SYNTAX      OCTET STRING (SIZE(8)) 

JuniTrapSeverity ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The set of trap severity values:
            trapEmergency(0)     - system is unusable
            trapAlert(1)         - action must be taken immediately
            trapCritical(2)      - critical conditions
            trapError(3)         - error conditions
            trapWarning(4)       - warning conditions
            trapNotice(5)        - normal but significant condition
            trapInformational(6) - informational messages
            trapDebug(7)         - debug-level messages "
    SYNTAX      INTEGER {
                    trapEmergency(0),
                    trapAlert(1),
                    trapCritical(2),
                    trapError(3),
                    trapWarning(4),
                    trapNotice(5),
                    trapInformational(6),
                    trapDebug(7) }

JuniSnmpIntfCompRestrictedMask ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This octet string is interpreted as a bit mask, in which each bit
        corresponds to an interface restriction.

        The DESCRIPTION clause of a MIB object having this SYNTAX should specify
        the semantics of bit values '1' and '0'.

        Bit definitions are as follows, where bit 31 is the most significant bit
        of the first octet, and bit 0 is the least significant bit of the fourth
        octet:

        Bit     interface restriction
        -----   -----------------------------------------------
         0      ifAdminStatus Down
         1-31   Undefined."
    SYNTAX      OCTET STRING (SIZE(4))

JuniSnmpManagementApplicationIndex ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Identifies a management application:
            eventMgr - disman event MIB application "
    SYNTAX      INTEGER {
                    eventMgr(1) }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Structure
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniSnmpObjects       OBJECT IDENTIFIER ::= { juniSnmpMIB 1 }
juniSnmpConformance   OBJECT IDENTIFIER ::= { juniSnmpMIB 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--
-- Object Groups
--
juniSnmpGeneral           OBJECT IDENTIFIER ::= { juniSnmpObjects 1 }
juniSnmpInterfaceCompress OBJECT IDENTIFIER ::= { juniSnmpGeneral 3 }
juniSnmpCommunity         OBJECT IDENTIFIER ::= { juniSnmpObjects 2 }
juniSnmpTrap              OBJECT IDENTIFIER ::= { juniSnmpObjects 3 }
juniSnmpAuthFailId        OBJECT IDENTIFIER ::= { juniSnmpObjects 4 }


--
-- General objects
--
juniSnmpMaxPduSize  OBJECT-TYPE
    SYNTAX      Integer32 (484..8192)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum sized SNMP PDU, in bytes, that this agent is capable of
        handling.  The default is 1500 bytes.  The possibility of IP
        fragmentation should be considered when setting this object to large
        values."
    ::= { juniSnmpGeneral 1 }

juniSnmpInterfaceMode  OBJECT-TYPE
    SYNTAX      INTEGER {
                    verbose(1),
                    compress(2),
                    enhanced(3) }
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "The interface table mode for the SNMP agent(s) associated with this
        system.
            verbose(1)  - the standard ifTable, ifXTable and ifStackTable
                          contain entries for every standard and proprietary
                          interface type supported by this system.
            compress(2) - the standard ifTable, ifXTable and ifStackTable
                          contain a subset of interface types.  Certain
                          interface types like HDLC and IP and others are
                          excluded from the standard tables but are manageable
                          from proprietary MIBs.
            enhanced(3) - the standard ifTable, ifXTable and ifStackTable
                          contain a subset of interface types.  Enhanced mode
                          cannot by configured at this time via SNMP.  Attempts
                          to set this value will fail.

        This object became obsolete when individual objects were added for each
        mode."
    ::= { juniSnmpGeneral 2 }

juniSnmpProxyStatus  OBJECT-TYPE
    SYNTAX      JuniEnable
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/disable SNMP proxy between virtual routers."
    DEFVAL    { enable }
    ::= { juniSnmpGeneral 4 }

juniSnmpAccessPermission  OBJECT-TYPE
    SYNTAX      INTEGER {
                    noAccess(1),
                    readAccess(2),
                    readWriteAccess(3) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The access permission to the MIB objects of this SNMP agent.
            noAccess        - No access permission granted.
            readAccess      - Read access permission granted.
            readWriteAccess - Read and write access permission granted."
    DEFVAL    { noAccess }
    ::= { juniSnmpGeneral 5 }


juniSnmpIntfCompCompressed  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "true(1)   - the standard ifTable, ifXTable and ifStackTable contain a
                     subset of interface types.  Certain interface types like
                     HDLC and IP and others are excluded from the standard
                     tables but are manageable from proprietary MIBs.
         false(2)  - the standard ifTable, ifXTable and ifStackTable contain
                     entries for every standard and proprietary interface type
                     supported by this system.

        This configuration is applicable to all interface related tables until
        interface compression based on interface table-types is applied. If
        interface table-type based compression is applied, get operation on 
        this object will correspond only to ifTable/ifXTable/juniIfTable and 
        set operation on this object will fail."
    DEFVAL    { false }
    ::= { juniSnmpInterfaceCompress 1 }

juniSnmpIntfCompEnhanced  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(5..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object governs which interface types are visible to SNMP
        management clients that use the standard ifTable, ifXTable and
        ifStackTable.  The object is a variable length octet string that is
        interpreted as a bit mask.  Each bit respresents a specific Juniper
        interface type that can be included or excluded in the standard
        interface tables.

        For each bit position in each octet of the string, a '1' or '0'
        indicates the corresponding interface type is either removed
        (compressed) from the standard interface MIB tables, or included
        respectively.

        Individual bit definitions follow the JuniIfType convention defined in
        the Juniper-UNI-IF-MIB.  For example, ip(0) and ppp(1) correspond to bit
        definitions 0 and 1 respectively.

        In each octet, bit 0 is least significant, bit 7 most significant.
        
        This configuration is applicable to all interface related tables until
        interface compression based on interface table-types is applied. If
        interface table-type based compression is applied, get operation on 
        this object will correspond only to ifTable/ifXTable/juniIfTable and 
        set operation on this object will fail."
    REFERENCE
        "Juniper-UNI-IF-MIB.JuniIfType"
    ::= { juniSnmpInterfaceCompress 2 }

juniSnmpIntfCompEnhancedDisplay  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..1000))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object displays the excluded interface types in human readable
        form.  Three dots (...) at the end of display string indicates that the
        output has been truncated.  The syntax rules are the same as for
        SNMP-FRAMEWORK-MIB.SnmpAdminString, except for the size constraint.

        This configuration is applicable to all interface related tables until
        interface compression based on interface table-types is applied. If
        interface table-type based compression is applied, this object will be 
        applicable only to ifTable/ifXTable/juniIfTable."
    ::= { juniSnmpInterfaceCompress 3 }

juniSnmpIntfCompRestricted  OBJECT-TYPE
    SYNTAX      JuniSnmpIntfCompRestrictedMask
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object governs which interface instances appear to SNMP management
        clients that use the standard ifTable, ifXTable and ifStackTable.  The
        control is based on a set of interface restrictions defined by
        JuniSnmpInterfaceModeRestrictedMask.

        For each bit position in each octet of the string, a '1' or '0' controls
        whether an interface instance that matches the restriction is removed or
        included in the standard interface MIB tables.  For example, setting the
        value of this object to 1 will remove all interface instances with an
        ifAdminStatus of down(2).

        In each octet, bit 0 is least significant, bit 7 most significant."
    ::= { juniSnmpInterfaceCompress 4 }

juniSnmpIntfCompRestrictedDisplay  OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..100))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object displays the restrictions in human readable form.  Three
        dots (...) at the end of display string indicates that the output has
        been truncated."
    ::= { juniSnmpInterfaceCompress 5 }

juniSnmpIntfCompTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniSnmpIntfCompEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains enhanced compression bitmask based on table-type."
    ::= { juniSnmpInterfaceCompress 6 }

juniSnmpIntfCompEntry  OBJECT-TYPE
    SYNTAX      JuniSnmpIntfCompEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry corresponds to a table type for which interface compression
        mask is applied."
    INDEX     { juniSnmpIntfCompTableType }
    ::= { juniSnmpIntfCompTable 1 }

JuniSnmpIntfCompEntry ::= SEQUENCE {
    juniSnmpIntfCompTableType         INTEGER,
    juniSnmpIntfCompEntryCompressed   TruthValue,
    juniSnmpIntfCompMask              OCTET STRING,
    juniSnmpIntfCompMaskDisplay       OCTET STRING }

juniSnmpIntfCompTableType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    others (0),
                    ifTables(1),
                    ifStackTables(2) }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "SNMP interface tables for which interface compression bitmask will be
        applicable. Supported values are:
        others        : All the other interface related tables except ifTables
                        and ifStackTables. Currently only ipNetToMediaTable is
                        supported.
        ifTables      : It consists of ifTable, ifXTable and juniIfTable.
        ifStackTables : It consists of ifStackTable, ifInvStackTable and
                       juniIfInvStackTable.
        "
    ::= { juniSnmpIntfCompEntry 1 }

juniSnmpIntfCompEntryCompressed  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "true(1)   - the standard ifTable, ifXTable and ifStackTable contain a
                     subset of interface types.  Certain interface types like
                     HDLC and IP and others are excluded from the standard
                     tables but are manageable from proprietary MIBs.
         false(2)  - the standard ifTable, ifXTable and ifStackTable contain
                     entries for every standard and proprietary interface type
                     supported by this system."
    DEFVAL    { false }
    ::= { juniSnmpIntfCompEntry 2 }

juniSnmpIntfCompMask  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(5..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object governs which interface types are visible to SNMP
        management clients. The object is a variable length octet string that
        is interpreted as a bit mask.  Each bit respresents a specific Juniper
        interface type that can be included or excluded in the standard
        interface tables.

        For each bit position in each octet of the string, a '1' or '0'
        indicates the corresponding interface type is either filtered
        (compressed) from the interface MIB tables, or included respectively.

        Individual bit definitions follow the JuniIfType convention defined in
        the Juniper-UNI-IF-MIB.  For example, ip(0) and ppp(1) correspond to bit
        definitions 0 and 1 respectively.

        In each octet, bit 0 is least significant, bit 7 most significant."
    REFERENCE
        "Juniper-UNI-IF-MIB.JuniIfType"
    ::= { juniSnmpIntfCompEntry 3 }

juniSnmpIntfCompMaskDisplay  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..1000))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object displays the excluded interface types in human readable
        form.  Three dots (...) at the end of display string indicates that the
        output has been truncated.  The syntax rules are the same as for
        SNMP-FRAMEWORK-MIB.SnmpAdminString, except for the size constraint."
    ::= { juniSnmpIntfCompEntry 4 }

--
-- The Management Application Table
--
juniSnmpManagementApplicationTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniSnmpManagementApplicationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for each management application supported
        by the router entry created in the juniRouterTable."
    ::= { juniSnmpGeneral 6 }

juniSnmpManagementApplicationEntry  OBJECT-TYPE
    SYNTAX      JuniSnmpManagementApplicationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry provides administrative control on a management application
        for the router designated by the first indice to this table.
        The second indice identifies the router management application.

        Entries in this table are created as a side-effect of row creation in
        the juniRouterTable."
    INDEX     { juniSnmpManagementApplicationRouterIndex,
                juniSnmpManagementApplicationIndex }
    ::= { juniSnmpManagementApplicationTable 1 }

JuniSnmpManagementApplicationEntry ::= SEQUENCE {
    juniSnmpManagementApplicationRouterIndex Unsigned32,
    juniSnmpManagementApplicationIndex       JuniSnmpManagementApplicationIndex,
    juniSnmpManagementApplicationRowStatus   RowStatus }

juniSnmpManagementApplicationRouterIndex  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The routerIndex of this router.  This object is the same as the
        juniRouterIndex object defined in the juniRouterTable."
    ::= { juniSnmpManagementApplicationEntry 1 }

juniSnmpManagementApplicationIndex  OBJECT-TYPE
    SYNTAX      JuniSnmpManagementApplicationIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Identities the management application."
    ::= { juniSnmpManagementApplicationEntry 2 }

juniSnmpManagementApplicationRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Controls creation/deletion of entries in this table.  Only
        'createAndGo' and 'destroy' enumeration values are supported."
    ::= { juniSnmpManagementApplicationEntry 3 }


--
-- SNMP Community Objects
--
juniSnmpCommunityTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniSnmpCommunityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of SNMP management clients.

        Authentic SNMP clients are identified by a combination community name
        and IP address.

        Upon receipt of an SNMP request, this table is scanned for a matching
        community name.  If an entry containing a matching community name is
        found, the entry's IP access list, if nonzero, is used to validate the
        source IP address received in the request; else, if the IP access list
        number in the matching entry is zero, the source IP address is accepted.

        Finally, the type of SNMP request is validated with respect to the
        access privilege of the matching entry (e.g. a SET Request is rejected
        for an entry having read-only privilege).

        Use of this table constitutes 'trivial authentication', i.e., no
        mechanism is employed to confirm the received SNMP request was indeed
        originated by the host identified by the IP source address."
    ::= { juniSnmpCommunity 1 }

juniSnmpCommunityEntry  OBJECT-TYPE
    SYNTAX      JuniSnmpCommunityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table entry describing an authentic SNMP Community."
    INDEX     { IMPLIED juniSnmpCommunityName }
    ::= { juniSnmpCommunityTable 1 }

JuniSnmpCommunityEntry ::= SEQUENCE {
    juniSnmpCommunityName            JuniSnmpCommunityName,
    juniSnmpCommunityRowStatus       RowStatus,
    juniSnmpCommunityPrivilege       INTEGER,
    juniSnmpCommunityAccessList      Integer32,
    juniSnmpCommunityAccessListName  JuniSnmpAccessListName,
    juniSnmpCommunityView            SnmpAdminString }

juniSnmpCommunityName  OBJECT-TYPE
    SYNTAX      JuniSnmpCommunityName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An SNMP community name."
    ::= { juniSnmpCommunityEntry 1 }

juniSnmpCommunityRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Controls creation/deletion of entries in this table.  Only
        'createAndGo' and 'destroy' enumeration values are supported."
    ::= { juniSnmpCommunityEntry 2 }

juniSnmpCommunityPrivilege  OBJECT-TYPE
    SYNTAX      INTEGER {
                    readOnly(1),
                    readWrite(2),
                    admin(3) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The access privilege for an SNMP Community authenticated by this entry
        (used in conjunction with MIB view as specified via
        juniSnmpCommunityView).
            readOnly    Read-only access to MIB with associated view.
            readWrite   Read-write access to MIB with associated view.
            admin       Read-write access to entire MIB (for backward
                        compatibility, automatically defaults to 'everything'
                        view and 'readWrite' privilege)."
    DEFVAL    { readOnly }
    ::= { juniSnmpCommunityEntry 3 }

juniSnmpCommunityAccessList  OBJECT-TYPE
    SYNTAX      Integer32 (0..10000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "If nonzero, the number of an IP access list that describes the IP hosts
        permitted SNMP management access to this device via the corresponding
        community name contained in this entry."
    ::= { juniSnmpCommunityEntry 4 }

juniSnmpCommunityAccessListName  OBJECT-TYPE
    SYNTAX      JuniSnmpAccessListName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "If not null, the name of an IP access list that describes the IP hosts
        permitted SNMP management access to this device via the corresponding
        community name contained in this entry."
    ::= { juniSnmpCommunityEntry 5 }

juniSnmpCommunityView  OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The view associated with an SNMP Community authenticated by this entry. 
         Following is the list of built-in system views.
 
            everything    Access to the entire MIB except packet mirror MIB.
            user          Access to non-administrative portions of MIB.
            nothing       No access.
            mirrorAdmin   Access to packet mirror MIB.

        'Administrative' portions of the MIB are those portions that pertain to
        management access into the managed device. Administrator can also create 
        a new SNMP MIB view dynamically and assign it to community entry. Access
        to packet mirror MIB is only thorugh 'mirrorAdmin' view. A community with
        'mirrorAdmin' view can be configure only through CLI administrator with 
        mirror configuration privileges."
    DEFVAL    { "user" }
    ::= { juniSnmpCommunityEntry 6 }

--
-- SNMP Trap Filter Objects
--
juniSnmpTrapGlobalFilter  OBJECT-TYPE
    SYNTAX      JuniSnmpTrapMask
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object provides global control over trap generation by this agent.
        For each bit position, a '1' or '0' indicates the corresponding trap
        category is enabled or disabled, respectively. For security reasons, 
        ‘Mirror’ category will not be allowed to be configured through SNMP."
    ::= { juniSnmpTrap 1 }

juniSnmpTrapSource  OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The ifIndex of the interface whose IP address is used as the source IP
        address for outbound SNMP traps.

        If zero, no interface is specified, the mechanism for selecting a source
        IP address is implementation-dependent, and may vary with each trap
        sent."
    ::= { juniSnmpTrap 2 }

juniSnmpTrapHostTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniSnmpTrapHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of SNMP Trap recipient."
    ::= { juniSnmpTrap 3 }

juniSnmpTrapHostEntry  OBJECT-TYPE
    SYNTAX      JuniSnmpTrapHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table entry describing an SNMP Trap recipient."
    INDEX     { juniSnmpTrapHostIpAddress }
    ::= { juniSnmpTrapHostTable 1 }

JuniSnmpTrapHostEntry ::= SEQUENCE {
    juniSnmpTrapHostIpAddress             IpAddress,
    juniSnmpTrapHostRowStatus             RowStatus,
    juniSnmpTrapHostUdpPort               Integer32,
    juniSnmpTrapHostCommunity             JuniSnmpCommunityName,
    juniSnmpTrapHostProtocolVersion       INTEGER,
    juniSnmpTrapHostFilter                JuniSnmpTrapMask,
    juniSnmpTrapHostSends                 Counter32,
    juniSnmpTrapHostDiscards              Counter32,
    juniSnmpTrapHostSeverityFilter        JuniTrapSeverity,
    juniSnmpTrapHostPingTimeOut           Integer32,
    juniSnmpTrapHostIncludeLogVarbinds    TruthValue,
    juniSnmpTrapHostQueueSize             Integer32,
    juniSnmpTrapHostQueueDrainRate        Integer32,
    juniSnmpTrapHostQueueFull             INTEGER,
    juniSnmpTrapHostBadEncodingDiscards   Counter32,
    juniSnmpTrapHostQueueFullDiscards     Counter32,
    juniSnmpTrapHostNoResponseDiscards    Counter32 }

juniSnmpTrapHostIpAddress  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP address of an authorized SNMP Trap recipient.  This must be a host
        IP address."
    ::= { juniSnmpTrapHostEntry 1 }

juniSnmpTrapHostRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Controls creation/deletion of entries in this table.  Only
        'createAndGo' and 'destroy' enumeration values are supported."
    ::= { juniSnmpTrapHostEntry 2 }

juniSnmpTrapHostUdpPort  OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The destination UDP port to which traps will be sent."
    DEFVAL    { 162 } -- default UDP port for SNMP traps
    ::= { juniSnmpTrapHostEntry 3 }

juniSnmpTrapHostCommunity  OBJECT-TYPE
    SYNTAX      JuniSnmpCommunityName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "An SNMP community name to be used in traps sent to this destination."
    ::= { juniSnmpTrapHostEntry 4 }

juniSnmpTrapHostProtocolVersion  OBJECT-TYPE
    SYNTAX      INTEGER {
                    v1(0),
                    v2c(1),
                    v3(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The format of the SNMP trap PDU to be sent to this trap destination.
            v1      Trap-PDU defined in RFC1157, encapsulated in the message
                    structure also defined in RFC1157.
            v2c     SNMPv2-Trap-PDU defined in RFC1905, encapsulated in the
                    message structure defined in RFC1901.
            v3      SNMPv2-Trap-PDU defined in RFC1905, encapsulated in the
                    message structure defined in RFC2571."
    DEFVAL    { v1 }
    ::= { juniSnmpTrapHostEntry 5 }

juniSnmpTrapHostFilter  OBJECT-TYPE
    SYNTAX      JuniSnmpTrapMask
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Bit mask designating the specific trap types enabled for transmission
        to this trap destination.  For each bit position, a '1' or '0' indicates
        the corresponding trap type is enabled or disabled, respectively. For 
        security reasons, ‘Mirror’ category will not be allowed to be configured 
        through SNMP.

        Note, trap generation is further constrained by the value
        juniSnmpTrapGlobalFilter."
    ::= { juniSnmpTrapHostEntry 6 }

juniSnmpTrapHostSends  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of traps submitted for transmission to this destination."
    ::= { juniSnmpTrapHostEntry 7 }

juniSnmpTrapHostDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded.  A trap may be
        discarded because the trap type is either not a configured type in
        juniSnmpTrapHostFilter, or because the traps's priority is below the
        minimum trap severity filter defined by juniSnmpTrapHostSeverityFilter."
    ::= { juniSnmpTrapHostEntry 8 }

juniSnmpTrapHostSeverityFilter  OBJECT-TYPE
    SYNTAX      JuniTrapSeverity
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The minimum severity value an snmp trap must have in order to be
        forwarded to this host."
    ::= { juniSnmpTrapHostEntry 9 }

juniSnmpTrapHostPingTimeOut  OBJECT-TYPE
    SYNTAX      Integer32 (0..90)
    UNITS       "Minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum ping time window that this host gets pinged repeatedly."
    DEFVAL    { 1 }
    ::= { juniSnmpTrapHostEntry 10 }

juniSnmpTrapHostIncludeLogVarbinds  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The configuration setting for snmp trap message content.  Enabling this
        management object configures the associated SNMP agent to include
        notification log name and the corresponding log index as part of the
        trap messages sent to this host."
    DEFVAL    { false }
    ::= { juniSnmpTrapHostEntry 11 }

juniSnmpTrapHostQueueSize  OBJECT-TYPE
    SYNTAX      Integer32 (32..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum number of traps to be kept in the queue."
    DEFVAL    { 32 }
    ::= { juniSnmpTrapHostEntry 12 }

juniSnmpTrapHostQueueDrainRate  OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum number of traps per second to be sent to the host.  Zero
        value indicates that there is no control over queue drain rate."
    DEFVAL    { 0 }
    ::= { juniSnmpTrapHostEntry 13 }

juniSnmpTrapHostQueueFull  OBJECT-TYPE
    SYNTAX      INTEGER {
                    dropLastIn(0),
                    dropFirstIn(1) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specify the method for handling Queue-Full condition.
            dropLastIn  -- When queue is full the most recent trap will be
                           dropped.
            dropFirstIn -- When queue is full the oldest trap in the queue will
                           be dropped."
    DEFVAL    { dropLastIn }
    ::= { juniSnmpTrapHostEntry 14 }

juniSnmpTrapHostBadEncodingDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded due to bad encoding."
    ::= { juniSnmpTrapHostEntry 15 }

juniSnmpTrapHostQueueFullDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded due to the queue being
        full."
    ::= { juniSnmpTrapHostEntry 16 }

juniSnmpTrapHostNoResponseDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded due to host not being
        available (not responding to the pings)."
    ::= { juniSnmpTrapHostEntry 17 }

juniSnmpTrapProxy  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The configuration setting for snmp trap proxying.  Enabling this
        management object configures the associated SNMP agent to proxy
        internally generated traps.

        Note that some implementations may support a single snmp trap proxy per
        system."
    ::= { juniSnmpTrap 4 }

juniSnmpTrapTrapSeverity  OBJECT-TYPE
    SYNTAX      JuniTrapSeverity
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The severity level of the trap."
    ::= { juniSnmpTrap 5 }

juniSnmpTrapGlobalDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded.  A trap may be
        discarded because the trap type is either not globally configured in
        juniSnmpTrapGlobalFilter, or because the traps's priority is below the
        minimum trap severity filter defined by
        juniSnmpTrapGlobalSeverityFilter."
    ::= { juniSnmpTrap 6 }

juniSnmpTrapGlobalSeverityFilter  OBJECT-TYPE
    SYNTAX      JuniTrapSeverity
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Traps flow through two levels of filtering: global and then host.  The
        value of this object defines the global minimum severity level a trap
        must have in order to be forwarded to the host level trap processing.  A
        trap will be discarded and counted in juniSnmpTrapGlobalDiscards if its
        severity level is less then the value of this object."
    ::= { juniSnmpTrap 7 }

juniSnmpTrapTotalTrapsReceived  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of trap requests that this agent has received.  Includes
        local submitted traps and proxied traps from other agents if this agent
        is the proxy agent."
    ::= { juniSnmpTrap 8 }

juniSnmpTrapLocalTrapsSubmitted  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local traps submitted to this agent."
    ::= { juniSnmpTrap 9 }

juniSnmpTrapProxyTrapsSubmitted  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of proxied traps submitted to this agent."
    ::= { juniSnmpTrap 10 }

juniSnmpTrapTotalTrapsDiscarded  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of proxy traps submitted to this agent."
    ::= { juniSnmpTrap 11 }

juniSnmpTrapNoMemoryDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded due to lack of system
        memory."
    ::= { juniSnmpTrap 12 }

juniSnmpTrapNoQueueResourceDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded due to no queue
        resources.  A trap may be discarded because the agent request queue is
        full juniSnmpTrapRequestQueueCongestionDiscards or the proxy agent
        reuest queue is full juniSnmpTrapProxyRequestQueueCongestion."
    ::= { juniSnmpTrap 13 }

juniSnmpTrapAgentSnmpNotAbleDiscards  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of trap requests that were discarded due to SNMP agent being
        disabled."
    ::= { juniSnmpTrap 14 }

juniSnmpTrapTotalTrapsOut  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of trap requests sent to every host that is configured to
        receive traps from this agent."
    ::= { juniSnmpTrap 15 }

juniSnmpTrapTotalProxyOut  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of trap requests sent to proxy virtual router."
    ::= { juniSnmpTrap 16 }

juniSnmpTrapSeverityFilterTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniSnmpTrapSeverityFilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of SNMP trap Severity filter."
    ::= { juniSnmpTrap 17 }

juniSnmpTrapSeverityFilterEntry  OBJECT-TYPE
    SYNTAX      JuniSnmpTrapSeverityFilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table entry specifying the trap severity filter for a particular
        trap category."
    INDEX     { juniSnmpTrapCategory }
    ::= { juniSnmpTrapSeverityFilterTable 1 }

JuniSnmpTrapSeverityFilterEntry ::= SEQUENCE {
    juniSnmpTrapCategory          Integer32, 
    juniSnmpTrapSeverityFilter    JuniTrapSeverity }

juniSnmpTrapCategory  OBJECT-TYPE
    SYNTAX      Integer32 (0..63)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of this object is an integer which is same as the bit 
        position specified for a particular trap category in JuniSnmpTrapMask.
        For example, value of juniSnmpTrapCategory object will be 6 for BGP
        traps."
    ::= { juniSnmpTrapSeverityFilterEntry 1 }

juniSnmpTrapSeverityFilter  OBJECT-TYPE
    SYNTAX      JuniTrapSeverity
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Traps flow through two levels of filtering: severity of a particular
        trap category and trap destination. If the severity of a particular
        category is not defined, global trap severity is used for computation.
        The value of this object defines trap-category based minimum severity
        level, a trap must have in order to be forwarded for the destination
        level trap filtering. A trap will be discarded and counted in 
        juniSnmpTrapGlobalDiscards if its severity level is less than the value
        of this object. For security reasons, ‘Mirror’ category will not be
        allowed to be configured through SNMP.
        Only those trap categories which are configured using per category
        based trap severity filter are displayed as part of this table.
        If the value of juniSnmpTrapGlobalSeverityFilter is modified, it will
        overwrite all the values specified in this table."

    ::= { juniSnmpTrapSeverityFilterEntry 2 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Traps & Trap Control
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--
-- No traps are defined in this MIB.
--
-- SNMP authentication failures can cause the SNMP standard
-- 'authenticationFailure' trap to be generated.  This trap and
-- its associated control object are defined in SNMPv2-MIB (RFC 1907).
-- The following objects are included in that trap to identify the
-- host that failed authentication.
--
juniSnmpAuthFailIdIpAddress  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The source IP address contained in a received SNMP request that failed
        authentication."
    ::= { juniSnmpAuthFailId 1 }

juniSnmpAuthFailIdUdpPort  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The source UDP port contained in a received SNMP request that failed
        authentication."
    ::= { juniSnmpAuthFailId 2 }

juniSnmpAuthFailIdCommunity  OBJECT-TYPE
    SYNTAX      OCTET STRING  -- no defined limit on SIZE
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The SNMP community contained in a received SNMP request that failed
        authentication."
    ::= { juniSnmpAuthFailId 3 }

juniSnmpAuthFailIdReason  OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(0),
                    badCommunityName(1),
                    badCommmunityUse(2),
                    hostDenied(3) }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The reason a received SNMP request failed authentication:
            other               Unspecified reason.
            badCommunityName    The community is not recognized.
            badCommunityUse     The community does not have privilege for the
                                SNMP request type (e.g. SET request with a
                                community having read-only privilege).
            hostDenied          The host IP address was denied by the
                                community's associated access list."
    ::= { juniSnmpAuthFailId 4 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniSnmpCompliances OBJECT IDENTIFIER ::= { juniSnmpConformance 1 }
juniSnmpGroups      OBJECT IDENTIFIER ::= { juniSnmpConformance 2 }

--
-- compliance statements
--
juniSnmpCompliance  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        SNMP MIB.  This statement became obsolete when View support and Named
        Access List support were added."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGroup,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 1 }                                  -- JUNOSe 1.0

juniSnmpCompliance2  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        SNMP MIB.  This statement became obsolete when juniSnmpInterfaceMode was
        added."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGroup2,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 2 }                                  -- JUNOSe 2.0

juniSnmpCompliance3  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        SNMP MIB.  This statement became obsolete when support for interface
        compress, trap severities and trap severity filtering was added and
        juniSnmpInterfaceMode was obsoleted."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGroup3,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 3 }                                  -- JUNOSe 2.3

juniSnmpCompliance4  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        SNMP MIB.  This statement became obsolete when trap proxy enable/disable
        support was added."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGeneralGroup,
            juniSnmpAccessGroup,
            juniSnmpTrapGroup,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 4 }                                  -- JUNOSe 3.3

juniSnmpCompliance5  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        SNMP MIB.  This statement became obsolete when support was added for
        ping time window and notification log data inclusion in trap varbinds."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGeneralGroup2,
            juniSnmpAccessGroup,
            juniSnmpTrapGroup,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 5 }                                  -- JUNOSe 3.4

juniSnmpCompliance6  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for entities which implement the Juniper SNMP
        MIB.  This statement became obsolete when support was added for access
        permission and management application table."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGeneralGroup2,
            juniSnmpAccessGroup,
            juniSnmpTrapGroup2,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 6 }                                  -- JUNOSe 4.1

juniSnmpCompliance7  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for entities which implement the Juniper SNMP
        MIB. This statement became obsolete when support was added for trap 
        severity filter table."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGeneralGroup3,
            juniSnmpAccessGroup,
            juniSnmpTrapGroup2,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 7 }                                  -- JUNOSe 5.1


juniSnmpCompliance8  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for entities which implement the Juniper SNMP
        MIB. This statement became obsolete when support was added for table
        type based interface compression."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGeneralGroup3,
            juniSnmpAccessGroup,
            juniSnmpTrapGroup3,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 8 }                                  -- JUNOSe 9.3

juniSnmpCompliance9  MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for entities which implement the Juniper SNMP
        MIB."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniSnmpGeneralGroup4,
            juniSnmpAccessGroup,
            juniSnmpTrapGroup3,
            juniSnmpAuthFailGroup }
    ::= { juniSnmpCompliances 9 }                                  -- JUNOSe 10.2

--
-- units of conformance
--
juniSnmpGroup  OBJECT-GROUP
    OBJECTS {
        -- General objects
        juniSnmpMaxPduSize,

        -- Manager objects
        juniSnmpCommunityName,
        juniSnmpCommunityRowStatus,
        juniSnmpCommunityPrivilege,
        juniSnmpCommunityAccessList,

        -- Trap objects
        juniSnmpTrapGlobalFilter,
        juniSnmpTrapSource,
        juniSnmpTrapProxy,

        juniSnmpTrapHostIpAddress,
        juniSnmpTrapHostRowStatus,
        juniSnmpTrapHostUdpPort,
        juniSnmpTrapHostCommunity,
        juniSnmpTrapHostProtocolVersion,
        juniSnmpTrapHostFilter,
        juniSnmpTrapHostSends }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of management objects pertaining to SNMP Agent
        capability in a Juniper product.  This group became obsolete when View
        support and Named Access List support were added."
    ::= { juniSnmpGroups 1 }                                       -- JUNOSe 1.0

juniSnmpAuthFailGroup  OBJECT-GROUP
    OBJECTS {
        juniSnmpAuthFailIdIpAddress,
        juniSnmpAuthFailIdUdpPort,
        juniSnmpAuthFailIdCommunity,
        juniSnmpAuthFailIdReason }
    STATUS      current
    DESCRIPTION
        "A collection of management objects pertaining to an SNMP authentication
        failure in a Juniper product."
    ::= { juniSnmpGroups 2 }                                       -- JUNOSe 1.0

juniSnmpGroup2  OBJECT-GROUP
    OBJECTS {
        -- General objects
        juniSnmpMaxPduSize,

        -- Manager objects
        juniSnmpCommunityName,
        juniSnmpCommunityRowStatus,
        juniSnmpCommunityPrivilege,
        juniSnmpCommunityAccessList,
        juniSnmpCommunityAccessListName,
        juniSnmpCommunityView,

        -- Trap objects
        juniSnmpTrapGlobalFilter,
        juniSnmpTrapSource,
        juniSnmpTrapProxy,

        juniSnmpTrapHostIpAddress,
        juniSnmpTrapHostRowStatus,
        juniSnmpTrapHostUdpPort,
        juniSnmpTrapHostCommunity,
        juniSnmpTrapHostProtocolVersion,
        juniSnmpTrapHostFilter,
        juniSnmpTrapHostSends }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of management objects pertaining to SNMP Agent
        capability in a Juniper product.  This group became obsolete when
        juniSnmpInterfaceMode was added."
    ::= { juniSnmpGroups 3 }                                       -- JUNOSe 2.0

juniSnmpGroup3  OBJECT-GROUP
    OBJECTS {
        -- General objects
        juniSnmpMaxPduSize,
        juniSnmpInterfaceMode,

        -- Manager objects
        juniSnmpCommunityName,
        juniSnmpCommunityRowStatus,
        juniSnmpCommunityPrivilege,
        juniSnmpCommunityAccessList,
        juniSnmpCommunityAccessListName,
        juniSnmpCommunityView,

        -- Trap objects
        juniSnmpTrapGlobalFilter,
        juniSnmpTrapSource,
        juniSnmpTrapProxy,

        juniSnmpTrapHostIpAddress,
        juniSnmpTrapHostRowStatus,
        juniSnmpTrapHostUdpPort,
        juniSnmpTrapHostCommunity,
        juniSnmpTrapHostProtocolVersion,
        juniSnmpTrapHostFilter,
        juniSnmpTrapHostSends }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of management objects pertaining to SNMP Agent
        capability in a Juniper product.  This group became obsolete when
        support for interface compress, trap severities and trap severity
        filtering was added and juniSnmpInterfaceMode was obsoleted."
    ::= { juniSnmpGroups 4 }                                       -- JUNOSe 2.3

juniSnmpGeneralGroup  OBJECT-GROUP
    OBJECTS {
        juniSnmpMaxPduSize,
        juniSnmpIntfCompCompressed,
        juniSnmpIntfCompEnhanced,
        juniSnmpIntfCompEnhancedDisplay,
        juniSnmpIntfCompRestricted,
        juniSnmpIntfCompRestrictedDisplay }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of management objects pertaining to general SNMP
        Agent capabilities in a Juniper product.  This group became obsolete
        when proxy enable/disable support was added."
    ::= { juniSnmpGroups 5 }                                       -- JUNOSe 3.3

juniSnmpAccessGroup  OBJECT-GROUP
    OBJECTS {
        juniSnmpCommunityName,
        juniSnmpCommunityRowStatus,
        juniSnmpCommunityPrivilege,
        juniSnmpCommunityAccessList,
        juniSnmpCommunityAccessListName,
        juniSnmpCommunityView }
    STATUS      current
    DESCRIPTION
        "A collection of management objects pertaining to SNMP Agent access
        capabilities in a Juniper product."
    ::= { juniSnmpGroups 6 }                                       -- JUNOSe 3.3

juniSnmpTrapGroup  OBJECT-GROUP
    OBJECTS {
        juniSnmpTrapGlobalFilter,
        juniSnmpTrapSource,
        juniSnmpTrapProxy,
        juniSnmpTrapHostIpAddress,
        juniSnmpTrapHostRowStatus,
        juniSnmpTrapHostUdpPort,
        juniSnmpTrapHostCommunity,
        juniSnmpTrapHostProtocolVersion,
        juniSnmpTrapHostFilter,
        juniSnmpTrapHostSends,
        juniSnmpTrapHostDiscards,
        juniSnmpTrapHostSeverityFilter,
        juniSnmpTrapTrapSeverity,
        juniSnmpTrapGlobalDiscards,
        juniSnmpTrapGlobalSeverityFilter }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of management objects pertaining to SNMP Agent trap
        capabilities in a Juniper product.  This group became obsolete when
        support was added for ping time window and notification log data
        inclusion in trap varbinds."
    ::= { juniSnmpGroups 7 }                                       -- JUNOSe 3.3

juniSnmpGeneralGroup2  OBJECT-GROUP
    OBJECTS {
        juniSnmpMaxPduSize,
        juniSnmpProxyStatus,
        juniSnmpIntfCompCompressed,
        juniSnmpIntfCompEnhanced,
        juniSnmpIntfCompEnhancedDisplay,
        juniSnmpIntfCompRestricted,
        juniSnmpIntfCompRestrictedDisplay }
    STATUS      obsolete
    DESCRIPTION
        "A collection of management objects pertaining to general SNMP Agent
        capabilities in a Juniper product. This group became obsolete
        when access permission was added."
    ::= { juniSnmpGroups 8 }                                       -- JUNOSe 3.4

juniSnmpTrapGroup2  OBJECT-GROUP
    OBJECTS {
        juniSnmpTrapGlobalFilter,
        juniSnmpTrapSource,
        juniSnmpTrapProxy,
        juniSnmpTrapHostIpAddress,
        juniSnmpTrapHostRowStatus,
        juniSnmpTrapHostUdpPort,
        juniSnmpTrapHostCommunity,
        juniSnmpTrapHostProtocolVersion,
        juniSnmpTrapHostFilter,
        juniSnmpTrapHostSends,
        juniSnmpTrapHostDiscards,
        juniSnmpTrapHostSeverityFilter,
        juniSnmpTrapHostPingTimeOut,
        juniSnmpTrapHostIncludeLogVarbinds,
        juniSnmpTrapHostQueueSize,
        juniSnmpTrapHostQueueDrainRate,
        juniSnmpTrapHostQueueFull,
        juniSnmpTrapHostBadEncodingDiscards,
        juniSnmpTrapHostQueueFullDiscards,
        juniSnmpTrapHostNoResponseDiscards,
        juniSnmpTrapTrapSeverity,
        juniSnmpTrapGlobalDiscards,
        juniSnmpTrapGlobalSeverityFilter,
        juniSnmpTrapTotalTrapsReceived,
        juniSnmpTrapLocalTrapsSubmitted,
        juniSnmpTrapProxyTrapsSubmitted,
        juniSnmpTrapTotalTrapsDiscarded,
        juniSnmpTrapNoMemoryDiscards,
        juniSnmpTrapNoQueueResourceDiscards,
        juniSnmpTrapAgentSnmpNotAbleDiscards,
        juniSnmpTrapTotalTrapsOut,
        juniSnmpTrapTotalProxyOut }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of management objects pertaining to SNMP Agent 
        trap capabilities in a Juniper product. This group became obsolete when
        support was added for trap severity filter table."
    ::= { juniSnmpGroups 9 }                                       -- JUNOSe 4.1

juniSnmpGeneralGroup3  OBJECT-GROUP
    OBJECTS {
        juniSnmpMaxPduSize,
        juniSnmpProxyStatus,
        juniSnmpAccessPermission,
        juniSnmpIntfCompCompressed,
        juniSnmpIntfCompEnhanced,
        juniSnmpIntfCompEnhancedDisplay,
        juniSnmpIntfCompRestricted,
        juniSnmpIntfCompRestrictedDisplay,
        juniSnmpManagementApplicationRowStatus }
    STATUS   obsolete   
    DESCRIPTION
        "A collection of management objects pertaining to general SNMP Agent
        capabilities in a Juniper product. This group became obsolete
        when support for interface compression based on interface table type
        was added."
    ::= { juniSnmpGroups 10 }                                      -- JUNOSe 5.1

juniSnmpTrapGroup3  OBJECT-GROUP
    OBJECTS {
        juniSnmpTrapGlobalFilter,
        juniSnmpTrapSource,
        juniSnmpTrapProxy,
        juniSnmpTrapHostIpAddress,
        juniSnmpTrapHostRowStatus,
        juniSnmpTrapHostUdpPort,
        juniSnmpTrapHostCommunity,
        juniSnmpTrapHostProtocolVersion,
        juniSnmpTrapHostFilter,
        juniSnmpTrapHostSends,
        juniSnmpTrapHostDiscards,
        juniSnmpTrapHostSeverityFilter,
        juniSnmpTrapHostPingTimeOut,
        juniSnmpTrapHostIncludeLogVarbinds,
        juniSnmpTrapHostQueueSize,
        juniSnmpTrapHostQueueDrainRate,
        juniSnmpTrapHostQueueFull,
        juniSnmpTrapHostBadEncodingDiscards,
        juniSnmpTrapHostQueueFullDiscards,
        juniSnmpTrapHostNoResponseDiscards,
        juniSnmpTrapTrapSeverity,
        juniSnmpTrapGlobalDiscards,
        juniSnmpTrapGlobalSeverityFilter,
        juniSnmpTrapTotalTrapsReceived,
        juniSnmpTrapLocalTrapsSubmitted,
        juniSnmpTrapProxyTrapsSubmitted,
        juniSnmpTrapTotalTrapsDiscarded,
        juniSnmpTrapNoMemoryDiscards,
        juniSnmpTrapNoQueueResourceDiscards,
        juniSnmpTrapAgentSnmpNotAbleDiscards,
        juniSnmpTrapTotalTrapsOut,
        juniSnmpTrapTotalProxyOut,
        juniSnmpTrapSeverityFilter
    }
    STATUS      current
    DESCRIPTION
        "A collection of management objects pertaining to SNMP Agent trap
        capabilities in a Juniper product."
    ::= { juniSnmpGroups 11 }                                       -- JUNOSe 9.3

juniSnmpGeneralGroup4  OBJECT-GROUP
    OBJECTS {
        juniSnmpMaxPduSize,
        juniSnmpProxyStatus,
        juniSnmpAccessPermission,
        juniSnmpIntfCompCompressed,
        juniSnmpIntfCompEnhanced,
        juniSnmpIntfCompEnhancedDisplay,
        juniSnmpIntfCompRestricted,
        juniSnmpIntfCompRestrictedDisplay,
        juniSnmpManagementApplicationRowStatus,
        juniSnmpIntfCompEntryCompressed,
        juniSnmpIntfCompMask,
        juniSnmpIntfCompMaskDisplay
    }
    STATUS      current
    DESCRIPTION
        "A collection of management objects pertaining to general SNMP Agent
        capabilities in a Juniper product."
    ::= { juniSnmpGroups 12 }                                      -- JUNOSe 10.1

END