path: root/MIBS/linksys/LINKSYS-vlan-MIB

LINKSYS-vlan-MIB DEFINITIONS ::= BEGIN

-- Version:    7.46
-- Date:       15 Jan 2007
--
-- 26-Oct-2004 Added
--              vlanDynamicVlanSupported
--              vlanDynamicVlanTable
--              vlanPortModeExtTable
--              vlanPrivateSupported
--              vlanPrivateTable
--              vlanPrivateCommunityTable
-- 01-Jul-2005 Added vlanMulticastTvTable
-- 14-Jul-2005 Added vlanMacBaseVlan group
-- 19-Jul-2005  Added
--              vlanPrivateEdgeGroupTable
--              vlanPrivateEdgeGroupIfIndexTable
-- 14-Jul-2005 Added
--              vlanSubnetRangeTable
--              vlanSubnetPortTable
-- 20-Jul-2005 Added
--              vlanSubnetRangeTable
--              vlanSubnetPortTable
-- 30-Nov-2005 Added
--              vlanTriplePlayTable
--              vlanTriplePlayMulticastTvTable
-- 21-Nov-2006 Added vlanVoice
-- 15-Jan-2007 Devided file appolo.txt to a few files
--             Renamed file appolo.txt to ralan-mib.mib
-- 11-Feb-2007 (VeredK) Added default vlan tagged ports MIBs
-- 29-Sep-2008 Added Default VLAN membership enabled ports
-- 16-Oct-2008 (ShaharG) Added DIPO Asymmetric vlan MIB
-- 13-Oct-2009 (GenadyB) Added trunk port mode vlan list  MIB
-- 06-Sep-2010 (GenadyB) Added rldot1qPortVlanStaticTable MIB

IMPORTS
    rnd                                         FROM LINKSYS-MIB
    DisplayString, TruthValue, RowStatus,
    MacAddress                                  FROM SNMPv2-TC
    VlanIndex, dot1qVlanIndex, PortList         FROM Q-BRIDGE-MIB
    VlanList1, VlanList2, VlanList3, VlanList4  FROM LINKSYS-BRIDGEMIBOBJECTS-MIB
    ifIndex                                     FROM IF-MIB
    dot1dBasePort                               FROM BRIDGE-MIB
    SnmpAdminString                             FROM SNMP-FRAMEWORK-MIB
    MODULE-IDENTITY, OBJECT-TYPE, IpAddress     FROM SNMPv2-SMI
    InetAddressType                             FROM INET-ADDRESS-MIB;

vlan MODULE-IDENTITY
              LAST-UPDATED "200602120000Z"
              ORGANIZATION "Linksys LLC."
              CONTACT-INFO
                      "www.linksys.com/business/support"
              DESCRIPTION
                      "The private MIB module definition for IP Multicast support in Linksys devices."
              REVISION "200602120000Z"
              DESCRIPTION
                       "Editorial changes to support new MIB compilers."
               REVISION "200404190000Z"
              DESCRIPTION
                      "Initial version of this MIB."
          ::= { rnd 48 }

vlanMibVersion OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MIB's version :
           Version 2: the current VLAN MIB replaced the previous one;
           Version 3: field vlanPortForbiddenEgressPort was added.
           Version 4: dot1q and dot1v supported
           Version 5: Private Edge Vlan
                        vlanPrivateEdgeSupported
                        vlanPrivateEdgeMibVersion
                        vlanPrivateEdgeTable"
    ::= { vlan 1 }

vlanMaxTableNumber OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum number of VLAN Tables supported by the device."
    ::= { vlan 2 }

vlanNameTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanNameEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table translates Vlan name to Vlan's tag and ifindex"
    ::= { vlan 21 }

vlanNameEntry OBJECT-TYPE
    SYNTAX      VlanNameEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The row definition for this table."
    INDEX { vlanNameName  }
    ::= { vlanNameTable 1 }

VlanNameEntry ::= SEQUENCE {
    vlanNameName          DisplayString,
    vlanNameTag           INTEGER,
    vlanNameIfIndex       INTEGER
}

vlanNameName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Vlan's name"
    ::=  { vlanNameEntry 1 }

vlanNameTag OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Vlan's tag"
    ::=  { vlanNameEntry 2 }

vlanNameIfIndex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Vlan's ifindex"
    ::=  { vlanNameEntry 3 }

vlanPortModeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPortModeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table hold information on port status trunk or access"
    ::= { vlan 22 }

vlanPortModeEntry OBJECT-TYPE
    SYNTAX      VlanPortModeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The row definition for this table."
    INDEX { ifIndex }
    ::= { vlanPortModeTable 1 }

VlanPortModeEntry ::= SEQUENCE {
    vlanPortModeState      INTEGER
}

vlanPortModeState OBJECT-TYPE
   SYNTAX       INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The port state, 1 is generic cli"
    ::=  { vlanPortModeEntry 1 }

vlanSendUnknownToAllPorts OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "If a value of the parameter is true a frame with unknown
         destination MAC address sent by the Layer 3 to a VLAN will be
         sent to all ports of the VLAN.
         If a value of the parameter is false a frame with unknown
         destination MAC address sent by the Layer 3 to a VLAN will be
         discarded."
    DEFVAL { true }
    ::= { vlan 27 }

vlanDefaultSupported OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "supported or not default vlan."
    ::= { vlan 29 }

vlanDot1vSupported OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "802.1v standard for vlan per port and protocol."
    ::= { vlan 31 }

vlanDefaultEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "if supported default vlan , indicate enabled or disabled"
    ::= { vlan 32 }

vlanSpecialTagTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanSpecialTagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "special vlan tag used for this port"
    ::= { vlan 33 }

vlanSpecialTagEntry OBJECT-TYPE
    SYNTAX      VlanSpecialTagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of special tag"
    INDEX   { ifIndex  }
    ::= { vlanSpecialTagTable 1 }

VlanSpecialTagEntry ::= SEQUENCE {
        vlanSpecialTagVID     VlanIndex,
        vlanSpecialTagStatus  RowStatus
    }

vlanSpecialTagVID OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "specify the special vlan tag ."
    ::= { vlanSpecialTagEntry  1 }

vlanSpecialTagStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanSpecialTagEntry 2 }

vlanSpecialTagCurrentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanSpecialTagCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "special Current vlan tag used for this port"
    ::= { vlan 34 }

vlanSpecialTagCurrentEntry OBJECT-TYPE
    SYNTAX      VlanSpecialTagCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of Current special tag"
    INDEX   { ifIndex  }
    ::= { vlanSpecialTagCurrentTable 1 }

VlanSpecialTagCurrentEntry ::= SEQUENCE {
        vlanSpecialTagCurrentVID      VlanIndex,
        vlanSpecialTagCurrentReserved TruthValue,
        vlanSpecialTagCurrentActive   TruthValue
    }

vlanSpecialTagCurrentVID OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "specify the special vlan tag ."
    ::= { vlanSpecialTagCurrentEntry  1 }

vlanSpecialTagCurrentReserved OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "specify if the special vlan tag is reserved ."
    ::= { vlanSpecialTagCurrentEntry  2 }

vlanSpecialTagCurrentActive OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "specify if the special vlan tag is used ."
    ::= { vlanSpecialTagCurrentEntry  3 }

vlanPrivateEdgeSupported OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "is private edge supported."
    ::= { vlan 35 }

vlanPrivateEdgeVersion OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "private edge version."
    ::= { vlan 36 }

vlanPrivateEdgeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPrivateEdgeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "table for pve port and uplink"
    ::= { vlan 37 }

vlanPrivateEdgeEntry OBJECT-TYPE
    SYNTAX      VlanPrivateEdgeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of pve"
    INDEX   { ifIndex  }
    ::= { vlanPrivateEdgeTable 1 }

VlanPrivateEdgeEntry ::= SEQUENCE {
        vlanPrivateEdgeUplink  INTEGER,
        vlanPrivateEdgeStatus  RowStatus
    }

vlanPrivateEdgeUplink OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "specify the uplink port."
    ::= { vlanPrivateEdgeEntry  1 }

vlanPrivateEdgeStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanPrivateEdgeEntry 2 }

vlanDynamicVlanSupported OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "is DynamicVlanVlan supported."
    ::= { vlan 38 }

vlanDynamicVlanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanDynamicVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "table for DynamicVlan"
    ::= { vlan 39 }

vlanDynamicVlanEntry OBJECT-TYPE
    SYNTAX      VlanDynamicVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of DynamicVlan"
    INDEX   { vlanDynamicVlanMacAddress  }
    ::= { vlanDynamicVlanTable 1 }

VlanDynamicVlanEntry ::= SEQUENCE {
        vlanDynamicVlanMacAddress  MacAddress,
        vlanDynamicVlanTag     VlanIndex,
        vlanDynamicVlanStatus      RowStatus
    }

vlanDynamicVlanMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "mac address "
    ::= { vlanDynamicVlanEntry  1 }

vlanDynamicVlanTag OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "vlan Tag"
    ::= { vlanDynamicVlanEntry  2 }

vlanDynamicVlanStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanDynamicVlanEntry 3 }

vlanPortModeExtTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPortModeExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table hold information on port status trunk or access"
    ::= { vlan 40 }

vlanPortModeExtEntry OBJECT-TYPE
    SYNTAX      VlanPortModeExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The row definition for this table."
    INDEX { ifIndex }
    ::= { vlanPortModeExtTable 1 }

VlanPortModeExtEntry ::= SEQUENCE {
    vlanPortModeExtState      INTEGER,
    vlanPortModeExtStatus     RowStatus
}

vlanPortModeExtState OBJECT-TYPE
   SYNTAX       INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The ext"
    ::=  { vlanPortModeExtEntry 1 }

vlanPortModeExtStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanPortModeExtEntry 2 }

vlanPrivateSupported OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "is private vlan supported."
    ::= { vlan 41 }

vlanPrivateTableOld OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPrivateEntryOld
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "table for PrivateVlan"
    ::= { vlan 42 }

vlanPrivateEntryOld OBJECT-TYPE
    SYNTAX      VlanPrivateEntryOld
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of PrivateVlan"
    INDEX   { dot1qVlanIndex  }
    ::= { vlanPrivateTableOld 1 }

VlanPrivateEntryOld ::= SEQUENCE {
        vlanPrivateOldIsolatedVlanTag  INTEGER,
        vlanPrivateOldStatus           RowStatus
    }

vlanPrivateOldIsolatedVlanTag OBJECT-TYPE
    SYNTAX      INTEGER (0..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "vlan Tag"
    ::= { vlanPrivateEntryOld  1 }

vlanPrivateOldStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanPrivateEntryOld 2 }

vlanPrivateCommunityTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPrivateCommunityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "table for PrivateVlan"
    ::= { vlan 43 }

vlanPrivateCommunityEntry OBJECT-TYPE
    SYNTAX      VlanPrivateCommunityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of PrivateVlan"
    INDEX   { dot1qVlanIndex, vlanPrivateCommunityVlanTag  }
    ::= { vlanPrivateCommunityTable 1 }

VlanPrivateCommunityEntry ::= SEQUENCE {
        vlanPrivateCommunityVlanTag  VlanIndex,
        vlanPrivateCommunityStatus   RowStatus
    }

vlanPrivateCommunityVlanTag OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "vlan Tag"
    ::= { vlanPrivateCommunityEntry  1 }

vlanPrivateCommunityStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanPrivateCommunityEntry 2 }

vlanMulticastTvTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanMulticastTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " multicast vlan used for this port"
    ::= { vlan 44 }

vlanMulticastTvEntry OBJECT-TYPE
    SYNTAX      VlanMulticastTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of multicast tag"
    INDEX   { ifIndex  }
    ::= { vlanMulticastTvTable 1 }

VlanMulticastTvEntry ::= SEQUENCE {
        vlanMulticastTvVID     VlanIndex,
        vlanMulticastTvStatus  RowStatus
    }

vlanMulticastTvVID OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "specify the TV vlan tag, vlan must exist ."
    ::= { vlanMulticastTvEntry  1 }

vlanMulticastTvStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanMulticastTvEntry 2 }

-- -------------------------------------------------------------
-- vlanMacBaseVlan group
-- -------------------------------------------------------------

vlanMacBaseVlanGroupTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanMacBaseVlanGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains mappings from Range of MAC
         addresses to Group Identifiers used for
         MAC-based VLAN Classification."
    ::= { vlan 45 }

vlanMacBaseVlanGroupEntry OBJECT-TYPE
    SYNTAX      VlanMacBaseVlanGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A mapping from a Range of MAC addresses to a
         Group Identifier."
    INDEX       { vlanMacBaseVlanMacAddress,
                  vlanMacBaseVlanMacMask }
    ::= { vlanMacBaseVlanGroupTable 1 }

VlanMacBaseVlanGroupEntry ::=
    SEQUENCE {
        vlanMacBaseVlanMacAddress
            MacAddress,
        vlanMacBaseVlanMacMask
            INTEGER,
        vlanMacBaseVlanGroupId
            INTEGER,
        vlanMacBaseVlanGroupRowStatus
            RowStatus
    }

vlanMacBaseVlanMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The base MAC address of the range."
    REFERENCE
        "IEEE 802.1v clause 8.6.2"
    ::= { vlanMacBaseVlanGroupEntry 1 }

vlanMacBaseVlanMacMask OBJECT-TYPE
    SYNTAX      INTEGER (9..48)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Mask of the range.
        The mask determains the leading '1' bits of the mask (MSB).
        48 means single HOST and 9 means the widest range.
        The MASK is limited to 9 to avoid entring ranges including
        multicast addresses.
        "
    ::= { vlanMacBaseVlanGroupEntry 2 }

vlanMacBaseVlanGroupId OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents a group of ranges of MAC addresses
         that are associated together when assigning a
         VID to a frame."
    ::= { vlanMacBaseVlanGroupEntry 3 }

vlanMacBaseVlanGroupRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry."
    ::= { vlanMacBaseVlanGroupEntry 4 }

vlanMacBaseVlanPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanMacBaseVlanPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains VID sets used for
         MAC-based VLAN Classification."
    ::= { vlan 46 }

vlanMacBaseVlanPortEntry OBJECT-TYPE
    SYNTAX      VlanMacBaseVlanPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A VID set for a port and group."
    INDEX       { dot1dBasePort,
                  vlanMacBaseVlanPortGroupId }
    ::= { vlanMacBaseVlanPortTable 1 }

VlanMacBaseVlanPortEntry ::=
    SEQUENCE {
        vlanMacBaseVlanPortGroupId
            INTEGER,
        vlanMacBaseVlanPortGroupVid
            VlanIndex,
        vlanMacBaseVlanPortRowStatus
            RowStatus
    }

vlanMacBaseVlanPortGroupId OBJECT-TYPE
    SYNTAX      INTEGER (1..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Designates a group of Ranges in the ranges
         Group Database."
    ::= { vlanMacBaseVlanPortEntry 1 }

vlanMacBaseVlanPortGroupVid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The VID associated with a group of range MAC addresses for
         each port."
    ::= { vlanMacBaseVlanPortEntry 2 }

vlanMacBaseVlanPortRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry."
    ::= { vlanMacBaseVlanPortEntry 3 }

vlanPrivateEdgeGroupTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPrivateEdgeGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "table for pve port and uplink"
    ::= { vlan 47 }

vlanPrivateEdgeGroupEntry OBJECT-TYPE
    SYNTAX      VlanPrivateEdgeGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of pve"
    INDEX   { vlanPrivateEdgeGroupSource }
    ::= { vlanPrivateEdgeGroupTable 1 }

VlanPrivateEdgeGroupEntry ::= SEQUENCE {
        vlanPrivateEdgeGroupSource  INTEGER,
        vlanPrivateEdgeGroupUplink  INTEGER,
        vlanPrivateEdgeGroupStatus  RowStatus
    }

vlanPrivateEdgeGroupSource OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "specify the uplink group."
    ::= { vlanPrivateEdgeGroupEntry  1 }

vlanPrivateEdgeGroupUplink OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "specify the uplink port."
    ::= { vlanPrivateEdgeGroupEntry  2 }

vlanPrivateEdgeGroupStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanPrivateEdgeGroupEntry 3 }

vlanPrivateEdgeGroupIfIndexTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPrivateEdgeGroupIfIndexEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "table for pve port and uplink"
    ::= { vlan 48 }

vlanPrivateEdgeGroupIfIndexEntry OBJECT-TYPE
    SYNTAX      VlanPrivateEdgeGroupIfIndexEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of pve"
    INDEX   { ifIndex }
    ::= { vlanPrivateEdgeGroupIfIndexTable 1 }

VlanPrivateEdgeGroupIfIndexEntry ::= SEQUENCE {
        vlanPrivateEdgeGroupIfIndexID       INTEGER,
        vlanPrivateEdgeGroupIfIndexDomainID INTEGER
    }

vlanPrivateEdgeGroupIfIndexID OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "specify the ifIndex group id."
    ::= { vlanPrivateEdgeGroupIfIndexEntry  1 }

vlanPrivateEdgeGroupIfIndexDomainID OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "specify the ifIndex group id."
    ::= { vlanPrivateEdgeGroupIfIndexEntry  2 }


-- -------------------------------------------------------------
-- vlanSubnetRange group
-- -------------------------------------------------------------
vlanSubnetRangeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanSubnetRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table that contains mappings from subnet
                 range to Group Identifiers used for
                 Port-and-subnet-based VLAN Classification."
    REFERENCE        "IEEE 802.1v clause 8.6.4"
    ::= { vlan 49 }

vlanSubnetRangeEntry OBJECT-TYPE
    SYNTAX      VlanSubnetRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION        "A mapping from a subnet to a
                        Group Identifier."
    INDEX       {  vlanSubnetRangeAddr,
                   vlanSubnetRangeMask  }
    ::= { vlanSubnetRangeTable 1 }

VlanSubnetRangeEntry ::=
SEQUENCE {        vlanSubnetRangeAddr       IpAddress,
                  vlanSubnetRangeMask       INTEGER,
                  vlanSubnetRangeGroupId    INTEGER,
                  vlanSubnetRangeRowStatus  RowStatus    }

vlanSubnetRangeAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION            "The IP address of the range "
::= { vlanSubnetRangeEntry 1 }

vlanSubnetRangeMask OBJECT-TYPE
    SYNTAX      INTEGER (1..32)
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION            "The numbers of continuous ones in the mask "
     ::= { vlanSubnetRangeEntry 2 }

vlanSubnetRangeGroupId OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION        "Represents a group of subnets that are associated
                        together when assigning a VID to a frame."
    ::= { vlanSubnetRangeEntry 3 }

vlanSubnetRangeRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION        "This object indicates the status of this entry."
    ::= { vlanSubnetRangeEntry 4 }

-- port bind
vlanSubnetPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanSubnetPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION        "A table that contains VID sets used for
                        Port-and-subnet-based VLAN Classification."
    ::= { vlan 50 }

vlanSubnetPortEntry OBJECT-TYPE
    SYNTAX      VlanSubnetPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION        "A VID set for a port."
    INDEX       { dot1dBasePort,                  vlanSubnetPortGroupId }
    ::= { vlanSubnetPortTable 1 }

VlanSubnetPortEntry ::=
    SEQUENCE {        vlanSubnetPortGroupId            INTEGER,
                      vlanSubnetPortGroupVid            INTEGER,
                      vlanSubnetPortRowStatus            RowStatus    }

vlanSubnetPortGroupId OBJECT-TYPE
    SYNTAX      INTEGER (1..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION        "Designates a group of subnets in the
                         Group Database."
    ::= { vlanSubnetPortEntry 1 }

vlanSubnetPortGroupVid OBJECT-TYPE
    SYNTAX      INTEGER (1..4094)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION        "The VID associated with a group of subnets for
                        each port."
    ::= { vlanSubnetPortEntry 2 }

vlanSubnetPortRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION        "This object indicates the status of this entry."
::= { vlanSubnetPortEntry 3 }

----------------------
--  Triple Play
----------------------

-- vlanTriplePlayTable table converted to Inet  See vlanInetTriplePlayTable

vlanTriplePlayTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanTriplePlayEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " TriplePlay table, map CPE vlan to multicastTvVlan"
    ::= { vlan 51}

vlanTriplePlayEntry OBJECT-TYPE
    SYNTAX      VlanTriplePlayEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of TriplePlay table"
    INDEX   { vlanTriplePlayInnerVID     }
    ::= { vlanTriplePlayTable 1 }

VlanTriplePlayEntry ::= SEQUENCE {
        vlanTriplePlayInnerVID     VlanIndex,
        vlanTriplePlayMulticastTvVID     VlanIndex,
        vlanTriplePlayRowStatus  RowStatus
    }

vlanTriplePlayInnerVID     OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         " Specifies  the CPE inner vlan."
    ::= { vlanTriplePlayEntry  1 }

vlanTriplePlayMulticastTvVID     OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       " Specifies the multicast TV outer vlan."
    ::= { vlanTriplePlayEntry  2 }

vlanTriplePlayRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row creation and removal conventions."
    ::= { vlanTriplePlayEntry  3 }


-- vlanTriplePlayMulticastTvTable  table converted to Inet  see vlanInetTriplePlayMulticastTvTable
vlanTriplePlayMulticastTvTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanTriplePlayMulticatTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan"
    ::= { vlan 52}

vlanTriplePlayMulticatTvEntry OBJECT-TYPE
    SYNTAX      VlanTriplePlayMulticatTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of triple play MulticastTv table"
    INDEX   { vlanTriplePlayMulticastTvMulticastTvVID      }
    ::= { vlanTriplePlayMulticastTvTable 1 }

VlanTriplePlayMulticatTvEntry ::= SEQUENCE {
              vlanTriplePlayMulticastTvMulticastTvVID      VlanIndex,
        vlanTriplePlayMulticastTvMulticastTvPortList         PortList

}

vlanTriplePlayMulticastTvMulticastTvVID      OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Specifies the multicast TV external vlan."
    ::= { vlanTriplePlayMulticatTvEntry 1 }


vlanTriplePlayMulticastTvMulticastTvPortList  OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "the multicast tv port list."
    ::= { vlanTriplePlayMulticatTvEntry 2}

vlanDefaultExtManagment  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "enable disable ext managment on default vlan."
    ::= { vlan 53 }


-------------------------------
--  Voice VLAN MIBs definition
-------------------------------

-- deprecated
vlanVoice  OBJECT IDENTIFIER ::= { vlan 54 }

vlanVoiceAgingTimeout OBJECT-TYPE
    SYNTAX      INTEGER (1..43200)
    UNITS       "minutes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The vlanVoiceAgingTimeout indicates the time (in units of
            minutes) from when the last OUI MAC was ageout from the FDB the port
            will be removed from the Voice VLAN.

            The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours).

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    DEFVAL      { 1440 }
    ::= { vlanVoice 1 }


-- voice vlan table
vlanVoiceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanVoiceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing static configuration information for
        each voice VLAN configured into the device and dynamic port membership.
        All entries are permanent and will
        be restored after the device is reset."
    ::= { vlanVoice 2 }

vlanVoiceEntry OBJECT-TYPE
    SYNTAX      VlanVoiceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information for a voice VLAN configured into the device by management."
    INDEX   { dot1qVlanIndex }
    ::= { vlanVoiceTable 1 }

VlanVoiceEntry ::=
    SEQUENCE {
        vlanVoicePriority
            INTEGER,
        vlanVoicePriorityRemark
            TruthValue,
        vlanVoiceRowStatus
            RowStatus
    }

vlanVoicePriority OBJECT-TYPE
    SYNTAX      INTEGER (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "An administratively assigned Priority, which will be used
        for all traffic on the voice vlan, this gives the packets
        the requested priority (CoS) within the bridge."
    DEFVAL{ 6 }
    ::= { vlanVoiceEntry 1 }

vlanVoicePriorityRemark OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remark VPT on tagged frames egress the voice vlan according.
         to priority true.false"
    DEFVAL { false }
    ::= { vlanVoiceEntry 2 }

vlanVoiceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry."
    ::= { vlanVoiceEntry 3 }


-- Voice VLAN OUI Table
vlanVoiceOUITable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanVoiceOUIEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
        All entries are permanent and will be restored after the device is reset."
    ::= { vlanVoice 3 }

vlanVoiceOUIEntry OBJECT-TYPE
    SYNTAX      VlanVoiceOUIEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information for a voice VLANs OUI MAC Prefixes configured into the
        device by management."
    INDEX   { vlanVoiceOUIPrefix }
    ::= { vlanVoiceOUITable  1 }

VlanVoiceOUIEntry ::= SEQUENCE {
              vlanVoiceOUIPrefix                      OCTET STRING,
              vlanVoiceOUIDescription                 DisplayString,
              vlanVoiceOUIEntryRowStatus              RowStatus
}

vlanVoiceOUIPrefix   OBJECT-TYPE
    SYNTAX         OCTET STRING(SIZE(3))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The index value used to identify the OUI MAC Prefix component
             associated with this entry.

            The value of this object is used as an index to the
            vlanVoiceOUITable.

            Voice VLANs OUI Prefix is the first 3 most significant
            octets of the MAC address."
    ::= { vlanVoiceOUIEntry 1 }

vlanVoiceOUIDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "An optional text that describes the OUI."
    DEFVAL {""}
    ::=  { vlanVoiceOUIEntry 2 }

vlanVoiceOUIEntryRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry."
    ::= { vlanVoiceOUIEntry 3 }


-- Voice VLAN per Port configuration Table
vlanVoicePortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanVoicePortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing static and dynamic per port configuration information for Voice VLAN.
        All entries are permanent and will be restored after the device is reset."
    ::= { vlanVoice 4 }

vlanVoicePortEntry OBJECT-TYPE
    SYNTAX      VlanVoicePortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Static and dynamic per port information for a voice VLAN."
    INDEX { ifIndex }
    ::= { vlanVoicePortTable 1 }

VlanVoicePortEntry ::= SEQUENCE {
              vlanVoicePortEnable                           TruthValue,
              vlanVoicePortVlanIndex                        VlanIndex,
              vlanVoicePortSecure                           TruthValue,
              vlanVoicePortCurrentMembership                INTEGER {active(1),notActive(2)},
              vlanVoicePortQosMode                          INTEGER {src(1),all(2)}
}

vlanVoicePortEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable this port to be a candidate to be added into the Voice VLAN."
    DEFVAL{ false }
    ::= { vlanVoicePortEntry 1 }

vlanVoicePortVlanIndex OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Voice VLAN-ID the port is a candidate to be in."
    DEFVAL{ 4095 }
    ::= { vlanVoicePortEntry 2 }

vlanVoicePortSecure OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specify this port to be in Secure Mode when entering the Voice VLAN.
          In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes
         are accepted, otherwise dropped."
    DEFVAL{ false }
    ::= { vlanVoicePortEntry 3 }

vlanVoicePortCurrentMembership OBJECT-TYPE
    SYNTAX  INTEGER {
            active(1),
            notActive(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Port's current status of membership in Voice VLAN.

         Port's possible values of membership in Voice VLAN:
          'Active(1)'    - Port is currently added to a Voice VLAN .
          'NotActive(2)' - Specifies either that port is a candidate to be
                           in Voice VLAN or disabled."
    ::= { vlanVoicePortEntry 4 }

vlanVoicePortQosMode OBJECT-TYPE
    SYNTAX  INTEGER {
            src(1),
            all(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Port's current QOS mode in Voice VLAN.
         Possible values:
          'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan.
          'all(2)' - All traffic through that port received QOS of the Voice Vlan."
    ::= { vlanVoicePortEntry 5 }


vlanVoiceOUISetToDefault OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The vlanVoiceOUISetToDefault indicates that vlanVoiceOUITable
            should be set to it's default values if existed
            (OUI default prefixes).

            To do so the vlanVoiceOUITable should be previuosly deleted by usual
            entries destroying.

            This object behaviors as write-only than
            reading this object will always return 'false'."
    DEFVAL{ false }
    ::= { vlanVoice 5 }
--------------------------------------------------
--  Default VLAN tagged ports - MIBs definition
--------------------------------------------------

vlanDefault  OBJECT IDENTIFIER ::= { vlan 55 }

vlanDefaultTaggedPorts OBJECT-TYPE
    SYNTAX  PortList
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "list of default valn tagged ports."
    ::= { vlanDefault 1 }

--------------------------------------------------
--  Default VLAN excluded ports - MIBs definition
--------------------------------------------------

vlanDefaultEnabledPorts OBJECT-TYPE
    SYNTAX  PortList
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "List of default VLAN membership enabled ports."
    ::= { vlanDefault 2 }

-- vlanInetTriplePlayTable (replaced DEPRICATED vlanTriplePlayTable)

vlanInetTriplePlayTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanInetTriplePlayEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " TriplePlay table, map CPE vlan to multicastTvVlan"
    ::= { vlan 56}

vlanInetTriplePlayEntry OBJECT-TYPE
    SYNTAX      VlanInetTriplePlayEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of TriplePlay table"
    INDEX   { vlanInetTriplePlayInetAddressType, vlanTriplePlayInnerVID }
    ::= { vlanInetTriplePlayTable 1 }

VlanInetTriplePlayEntry ::= SEQUENCE {
        vlanInetTriplePlayInetAddressType   InetAddressType,
        vlanInetTriplePlayInnerVID              VlanIndex,
        vlanInetTriplePlayMulticastTvVID        VlanIndex,
        vlanInetTriplePlayRowStatus             RowStatus
    }

vlanInetTriplePlayInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Inet type IPv4/IPv6."
    ::= { vlanInetTriplePlayEntry 1 }

vlanInetTriplePlayInnerVID     OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         " Specifies  the CPE inner vlan."
    ::= { vlanInetTriplePlayEntry 2 }

vlanInetTriplePlayMulticastTvVID     OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       " Specifies the multicast TV outer vlan."
    ::= { vlanInetTriplePlayEntry  3 }

vlanInetTriplePlayRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row creation and removal conventions."
    ::= { vlanInetTriplePlayEntry  4 }

-- vlanInetTriplePlayMulticastTvTable (replaced DEPRICATED vlanTriplePlayMulticastTvTable)

vlanInetTriplePlayMulticastTvTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanInetTriplePlayMulticatTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan"
    ::= { vlan 57 }

vlanInetTriplePlayMulticatTvEntry OBJECT-TYPE
    SYNTAX      VlanInetTriplePlayMulticatTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " entry of triple play MulticastTv table"
    INDEX   { vlanTriplePlayMulticastTvMulticastTvVID      }
    ::= { vlanInetTriplePlayMulticastTvTable 1 }

VlanInetTriplePlayMulticatTvEntry ::= SEQUENCE {
        vlanInetTriplePlayMulticastTvMulticastTvVID      VlanIndex,
        vlanInetTriplePlayMulticastTvMulticastTvPortList         PortList
}

vlanInetTriplePlayMulticastTvMulticastTvVID      OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Specifies the multicast TV external vlan."
    ::= { vlanInetTriplePlayMulticatTvEntry 1 }


vlanInetTriplePlayMulticastTvMulticastTvPortList  OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "the multicast tv port list."
    ::= { vlanInetTriplePlayMulticatTvEntry 2}

vlanAsymmetricEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Indicates enabled or disabled of Asymetric Vlan"
    ::= { vlan 58 }


--------------------------------------------------
--  Private VLAN - MIBs definition
--------------------------------------------------

-- vlanPrivateTable

vlanPrivateTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPrivateEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Private vlan table which contains the private vlan entries."
    ::= { vlan 59 }

vlanPrivateEntry OBJECT-TYPE
    SYNTAX      VlanPrivateEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Private vlan entry which contains the private vlan definition."
    INDEX   { vlanPrivateVid }
    ::= { vlanPrivateTable 1 }

VlanPrivateEntry ::= SEQUENCE {
        vlanPrivateVid              VlanIndex,
        vlanPrivateType             INTEGER,
        vlanPrivatePrimaryVid       VlanIndex,
        vlanPrivateStatus           RowStatus
}

vlanPrivateVid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The static vlan ID which is set to one of the
          private vlan types."
    ::= { vlanPrivateEntry  1 }

vlanPrivateType OBJECT-TYPE
    SYNTAX INTEGER {
        primary(1),
        isolated(2),
        community(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "private vlan types:
            primary    - Carries traffic from promiscuous ports.
                         promiscuous port can communicate with all ports of the
                         same PVLAN, including the isolated and community
                         ports of the same PVLAN.

            isolated   - Carries traffic from isolated ports.
                         isolated ports can communicate only with the
                         promiscuous ports of the same PVLAN.

            community  - Carries traffic from community ports.
                         community ports of the same community can communicate
                         among themselves and with the promiscuous ports of the
                         same PVLAN."
    DEFVAL  { primary }
    ::= { vlanPrivateEntry 2 }


vlanPrivatePrimaryVid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The primary vlan ID which has defined in VlanPrivateEntry and which is
          associated with secondary vlan (in vlanPrivateMapTable).
          vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is
          primary vlan."
    ::= { vlanPrivateEntry  3 }

vlanPrivateStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanPrivateEntry 4 }

-- end of vlanPrivateTable

-- vlanPrivateMapTable

vlanPrivateMapTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanPrivateMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Private vlan mapping table which contains the private vlan mapping entries."
    ::= { vlan 60 }

vlanPrivateMapEntry OBJECT-TYPE
    SYNTAX      VlanPrivateMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Private vlan mapping entry which contains the primary / secondary
         private vlan association and their ports membership."
    INDEX   { vlanPrivateMapPrimaryVid, vlanPrivateMapSecondaryVid }
    ::= { vlanPrivateMapTable 1 }

VlanPrivateMapEntry ::= SEQUENCE {
        vlanPrivateMapPrimaryVid        VlanIndex,
        vlanPrivateMapSecondaryVid      VlanIndex,
        vlanPrivateMapPrimaryPorts      PortList,
        vlanPrivateMapSecondaryPorts    PortList,
        vlanPrivateMapStatus            RowStatus
}

vlanPrivateMapPrimaryVid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The primary private vlan ID which is associated with the secondary
         (isolated or community) vlan (vlanPrivateMapSecondaryVid)."
    ::= { vlanPrivateMapEntry  1 }

vlanPrivateMapSecondaryVid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The secondary private vlan ID which is associated with the primary
         vlan (vlanPrivateMapPrimaryVid)."
    ::= { vlanPrivateMapEntry  2 }

vlanPrivateMapPrimaryPorts  OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The private vlan promiscuous ports mode which are belongs to the
          association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid."
    ::= { vlanPrivateMapEntry 3}

vlanPrivateMapSecondaryPorts  OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The private vlan host ports mode which are belongs to the
          association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid."
    ::= { vlanPrivateMapEntry 4}

vlanPrivateMapStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { vlanPrivateMapEntry 5 }

-- end of vlanPrivateMapTable


-- vlanTrunkModePortTable

vlanTrunkPortModeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VlanTrunkPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The tables contains trunk mode port entries."
    ::= { vlan 61}

vlanTrunkPortModeEntry  OBJECT-TYPE
    SYNTAX VlanTrunkPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        " The entry contains port ifIndex,native vlan id and vlan list the port has a membership.
          The vlan list can contain not created vlans."
    INDEX { ifIndex }
    ::= { vlanTrunkPortModeTable 1 }

VlanTrunkPortModeEntry::=SEQUENCE{
   vlanTrunkPortModeNativeVlanId   VlanIndex,
   vlanTrunkModeList1to1024        VlanList1,
   vlanTrunkModeList1025to2048     VlanList2,
   vlanTrunkModeList2049to3072     VlanList3,
   vlanTrunkModeList3073to4094     VlanList4
}

vlanTrunkPortModeNativeVlanId OBJECT-TYPE
   SYNTAX  VlanIndex
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
      "Indicated native vlan index.Default value 0"
   DEFVAL {0}
   ::= { vlanTrunkPortModeEntry 1 }

vlanTrunkModeList1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "vlan trunk mode list 1. Default value is {0}"

   ::= { vlanTrunkPortModeEntry 2 }

vlanTrunkModeList1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "vlan trunk mode list 2. Default value is {0}"

   ::= { vlanTrunkPortModeEntry 3 }

vlanTrunkModeList2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "vlan trunk mode list 3. Default value is {0}"

   ::= { vlanTrunkPortModeEntry 4 }

vlanTrunkModeList3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "vlan trunk mode list 4. Default value is {0}"
   ::= { vlanTrunkPortModeEntry 5 }

-- vlanAccessModePortTable

vlanAccessPortModeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VlanAccessPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The tables contains access mode port entries."
    ::= { vlan 62}

vlanAccessPortModeEntry  OBJECT-TYPE
    SYNTAX VlanAccessPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        " The entry contains port ifIndex,access vlan id and multicast TV vlan id."
    INDEX { ifIndex }
    ::= { vlanAccessPortModeTable 1 }

VlanAccessPortModeEntry::=SEQUENCE{
   vlanAccessPortModeVlanId         VlanIndex,
   vlanAccessPortModeMcstTvVlanId   VlanIndex
}

vlanAccessPortModeVlanId OBJECT-TYPE
   SYNTAX  VlanIndex
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
      "Indicated access vlan id.Default value is 0"
   DEFVAL { 0 }
   ::= { vlanAccessPortModeEntry 1 }

vlanAccessPortModeMcstTvVlanId OBJECT-TYPE
   SYNTAX  VlanIndex
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
      "Indicated multicast TV vlan id. "

   ::= { vlanAccessPortModeEntry 2 }


-- vlanCustomerModePortTable

vlanCustomerPortModeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VlanCustomerPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The tables contains customer mode port entries."
    ::= { vlan 63}

vlanCustomerPortModeEntry  OBJECT-TYPE
    SYNTAX VlanCustomerPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        " The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id."
    INDEX { ifIndex }
    ::= { vlanCustomerPortModeTable 1 }

VlanCustomerPortModeEntry::=SEQUENCE{
   vlanCustomerPortModeVlanId                VlanIndex,
   vlanCustomerPortModeMtvList1to1024        VlanList1,
   vlanCustomerPortModeMtvList1025to2048     VlanList2,
   vlanCustomerPortModeMtvList2049to3072     VlanList3,
   vlanCustomerPortModeMtvList3073to4094     VlanList4

}

vlanCustomerPortModeVlanId OBJECT-TYPE
   SYNTAX  VlanIndex
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
      "Indicated customer vlan id.Default value is 0"
   DEFVAL { 0 }
   ::= { vlanCustomerPortModeEntry 1 }

vlanCustomerPortModeMtvList1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "vlan customer port mode multicast TV list 1. Default value is {0}"

   ::= { vlanCustomerPortModeEntry 2 }

vlanCustomerPortModeMtvList1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "vlan customer port mode multicast TV list 2. Default value is {0}"

   ::= { vlanCustomerPortModeEntry 3 }

vlanCustomerPortModeMtvList2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "vlan customer port mode multicast TV list 3. Default value is {0}"

   ::= { vlanCustomerPortModeEntry 4 }

vlanCustomerPortModeMtvList3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "vlan customer port mode multicast TV list 4. Default value is {0}"
   ::= { vlanCustomerPortModeEntry 5 }


vlanSwitchPortModeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VlanSwitchPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
     DESCRIPTION   "The table defines L3/L2 port context."
    ::= { vlan 64}

vlanSwitchPortModeEntry  OBJECT-TYPE
    SYNTAX VlanSwitchPortModeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The entry contains port ifIndex and switch port enable value."
    INDEX { ifIndex }
    ::= { vlanSwitchPortModeTable 1 }

VlanSwitchPortModeEntry::=SEQUENCE{
   vlanSwitchPortModeCategory            INTEGER
}

vlanSwitchPortModeCategory            OBJECT-TYPE
SYNTAX INTEGER {
       l2(1),
       l3(2)
   }
  MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION    "Indicated if a port is switchport (l2 port) or no switchport (l3 port)
                        1 - switchport
                        2 - no switchport. Default is 1"
   DEFVAL { 1 }
   ::= { vlanSwitchPortModeEntry  1 }



vlanPortModeContextTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VlanPortModeContextEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The tables contains current port mode context entries."
    ::= { vlan 65}

vlanPortModeContextEntry OBJECT-TYPE
    SYNTAX VlanPortModeContextEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The entry contains current port mode context."
    INDEX { ifIndex }
    ::= { vlanPortModeContextTable 1 }

VlanPortModeContextEntry::=SEQUENCE{
   vlanPortModeContextValue            INTEGER
}

vlanPortModeContextValue   OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION    "Indicated port context value:
                        0. Lag
                        1. Monitor
                        2. L3
                        3. RAVA
                        4. Dot1x
                        5. Dot1q
                        6. Access
                        7. Trunk
                        8. Customer
                        9. PV_promisc
                        10. PV_host"


   ::= { vlanPortModeContextEntry  1 }

-- vlanRsvl MIBs reservation

-- vlanRsvlEnable

vlanRsvlEnable OBJECT-TYPE
    SYNTAX INTEGER {
           enable(1),
           disable(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable / Disable Shared Vlans at the device."
    ::= { vlan 66 }

-- vlanRsvlMapTable

vlanRsvlMapTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanRsvlMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Shared vlan learning mapping table which contains the SVL mapping entries."
    ::= { vlan 67 }

vlanRsvlMapEntry OBJECT-TYPE
    SYNTAX      VlanRsvlMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "SVL mapping entry which contains the primary / secondary
         SVL association."
    INDEX   { vlanRsvlMapPrimaryVid, vlanRsvlMapSecondaryVid }
    ::= { vlanRsvlMapTable 1 }

VlanRsvlMapEntry ::= SEQUENCE {
        vlanRsvlMapPrimaryVid        VlanIndex,
        vlanRsvlMapSecondaryVid      VlanIndex,
        vlanRsvlMapStatus            RowStatus
}

vlanRsvlMapPrimaryVid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The primary SVL ID which is associated with the secondary
          shared vlan vlanRsvlMapSecondaryVid."
    ::= { vlanRsvlMapEntry  1 }

vlanRsvlMapSecondaryVid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The secondary SVL ID which is associated with the primary
          shared vlan vlanRsvlMapPrimaryVid."
    ::= { vlanRsvlMapEntry  2 }

vlanRsvlMapStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to
        row installation and removal conventions."
    ::= { vlanRsvlMapEntry 3 }

rldot1qPortVlanStaticTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1qPortVlanStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing static vlan port membership information."
    ::= { vlan 68 }

rldot1qPortVlanStaticEntry OBJECT-TYPE
    SYNTAX      Rldot1qPortVlanStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Static vlan membership information per port"
    INDEX   {ifIndex}
    ::= { rldot1qPortVlanStaticTable 1 }

Rldot1qPortVlanStaticEntry ::=SEQUENCE {

    rldot1qPortVlanStaticEgressList1to1024              VlanList1,
    rldot1qPortVlanStaticEgressList1025to2048           VlanList2,
    rldot1qPortVlanStaticEgressList2049to3072           VlanList3,
    rldot1qPortVlanStaticEgressList3073to4094           VlanList4,
    rldot1qPortVlanStaticUntaggedEgressList1to1024      VlanList1,
    rldot1qPortVlanStaticUntaggedEgressList1025to2048   VlanList2,
    rldot1qPortVlanStaticUntaggedEgressList2049to3072   VlanList3,
    rldot1qPortVlanStaticUntaggedEgressList3073to4094   VlanList4,
    rldot1qPortVlanStaticForbiddenList1to1024           VlanList1,
    rldot1qPortVlanStaticForbiddenList1025to2048        VlanList2,
    rldot1qPortVlanStaticForbiddenList2049to3072        VlanList3,
    rldot1qPortVlanStaticForbiddenList3073to4094        VlanList4
}

rldot1qPortVlanStaticEgressList1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 1 }

rldot1qPortVlanStaticEgressList1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 2 }

rldot1qPortVlanStaticEgressList2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 3 }

rldot1qPortVlanStaticEgressList3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 4}

rldot1qPortVlanStaticUntaggedEgressList1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress untagged vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 5 }

rldot1qPortVlanStaticUntaggedEgressList1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress untagged vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 6 }

rldot1qPortVlanStaticUntaggedEgressList2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress untagged vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 7 }

rldot1qPortVlanStaticUntaggedEgressList3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port egress untagged vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 8}

rldot1qPortVlanStaticForbiddenList1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port forbidden vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 9 }

rldot1qPortVlanStaticForbiddenList1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port forbidden vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 10 }

rldot1qPortVlanStaticForbiddenList2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port forbidden vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 11 }

rldot1qPortVlanStaticForbiddenList3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "The port forbidden vlan static list.Default value is {0}"
   DEFVAL {'00'H}
   ::= { rldot1qPortVlanStaticEntry 12}

rldot1qVlanStaticListTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1qVlanStaticListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table contains only one entry of a static vlan list."
    ::= { vlan 69 }

rldot1qVlanStaticListEntry OBJECT-TYPE
    SYNTAX      Rldot1qVlanStaticListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Staticly created by local or network management vlan list"
    INDEX   {rldot1qVlanStaticListIndex}
    ::= { rldot1qVlanStaticListTable 1 }

Rldot1qVlanStaticListEntry ::=SEQUENCE {
    rldot1qVlanStaticListIndex         INTEGER,
    rldot1qVlanStaticList1to1024       VlanList1,
    rldot1qVlanStaticList1025to2048    VlanList2,
    rldot1qVlanStaticList2049to3072    VlanList3,
    rldot1qVlanStaticList3073to4094    VlanList4

}

rldot1qVlanStaticListIndex  OBJECT-TYPE
   SYNTAX      INTEGER {
        static(0),
        dynamicGvrp(1),
        dynamicRava(2)
   }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "An index is entrie's sequence.
      This field substitutes a vlan type.
      If the vlan was created by user configuration then
      the type is static.
      If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp.
      If the vlan was created by Radius server attribute assignment mechanism then
      the type is dynamicRava."
   ::= { rldot1qVlanStaticListEntry 1}

rldot1qVlanStaticList1to1024 OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of staticaly created vlans from 1 to 1024."

   ::= { rldot1qVlanStaticListEntry 2}

rldot1qVlanStaticList1025to2048 OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of according to the type field created vlans from 1025 to 2048."
   DEFVAL {'00'H}
   ::= { rldot1qVlanStaticListEntry 3}

rldot1qVlanStaticList2049to3072 OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of according to the type field created vlans from 2049 to 3072."
   DEFVAL {'00'H}
   ::= { rldot1qVlanStaticListEntry 4}

rldot1qVlanStaticList3073to4094 OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of according to the type field created vlans from 3073 to 4094."
   DEFVAL {'00'H}
   ::= { rldot1qVlanStaticListEntry 5}

rldot1qVlanStaticNameTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1qVlanStaticNameEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table contains created by user vlans names."
    ::= { vlan 70 }

rldot1qVlanStaticNameEntry  OBJECT-TYPE
    SYNTAX      Rldot1qVlanStaticNameEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Staticly created by local or network management vlan list"
    INDEX   {dot1qVlanIndex}
    ::= { rldot1qVlanStaticNameTable 1 }

Rldot1qVlanStaticNameEntry ::=SEQUENCE {
    rldot1qVlanStaticName   SnmpAdminString
}

rldot1qVlanStaticName OBJECT-TYPE
   SYNTAX      SnmpAdminString(SIZE(0..32))
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "An administratively assigned string,which may be used
     to identify the VLAN. The VLAN name must be unique or no name."
   REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
   DEFVAL {""}
   ::= { rldot1qVlanStaticNameEntry 1}

rlPortVlanTriplePlayMulticastTvTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlPortVlanTriplePlayMulticastTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table saves a list of vlans per port/lag."
    ::= { vlan 71 }

rlPortVlanTriplePlayMulticastTvEntry OBJECT-TYPE
    SYNTAX      RlPortVlanTriplePlayMulticastTvEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry of Triple Play Multicast Tv  table."
    INDEX   {ifIndex}
    ::= { rlPortVlanTriplePlayMulticastTvTable 1 }

RlPortVlanTriplePlayMulticastTvEntry ::=SEQUENCE {
    rlPortVlanTriplePlayMulticastTvList1to1024       VlanList1,
    rlPortVlanTriplePlayMulticastTvList1025to2048    VlanList2,
    rlPortVlanTriplePlayMulticastTvList2049to3072    VlanList3,
    rlPortVlanTriplePlayMulticastTvList3073to4094    VlanList4
}

rlPortVlanTriplePlayMulticastTvList1to1024  OBJECT-TYPE
   SYNTAX      VlanList1
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of staticaly created Triple Play MTV vlans from 1 to 1024."

   ::= { rlPortVlanTriplePlayMulticastTvEntry 1}

rlPortVlanTriplePlayMulticastTvList1025to2048  OBJECT-TYPE
   SYNTAX      VlanList2
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of staticaly created Triple Play MTV vlans from 1025 to 2048."

   ::= { rlPortVlanTriplePlayMulticastTvEntry 2}

rlPortVlanTriplePlayMulticastTvList2049to3072  OBJECT-TYPE
   SYNTAX      VlanList3
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of staticaly created Triple Play MTV vlans from 2049 to 3072."

   ::= { rlPortVlanTriplePlayMulticastTvEntry 3}

rlPortVlanTriplePlayMulticastTvList3073to4094  OBJECT-TYPE
   SYNTAX      VlanList4
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "A list of staticaly created Triple Play MTV vlans from 3073 to 4094."

   ::= { rlPortVlanTriplePlayMulticastTvEntry 4}

rldot1qVlanMembershipTypeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Rldot1qVlanMembershipTypeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN."
    ::= { vlan 72 }

rldot1qVlanMembershipTypeEntry  OBJECT-TYPE
    SYNTAX      Rldot1qVlanMembershipTypeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Staticly or dynamicly created VLAN ID owner entry"
    INDEX   {dot1qVlanIndex}
    ::= { rldot1qVlanMembershipTypeTable 1 }

Rldot1qVlanMembershipTypeEntry ::=SEQUENCE {
    rldot1qVlanMembershipTypeBitmap        INTEGER

}

rldot1qVlanMembershipTypeBitmap  OBJECT-TYPE
   SYNTAX      INTEGER
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This field contains a bitmap of owners that can creates and/or  add a port
      to the VLAN.
      There exist three such type of owners :
      Default VLAN
      Manual created VLAN
      Dynamic(RAVA)created VLAN
      GVRP(MVRP)created VLAN
     "
   ::= { rldot1qVlanMembershipTypeEntry 1}

-- next free ::= {vlan 73}


END