path: root/MIBS/nokia/ALCATEL-IND1-CHASSIS-MIB

ALCATEL-IND1-CHASSIS-MIB DEFINITIONS ::= BEGIN

IMPORTS
         OBJECT-TYPE,
         OBJECT-IDENTITY,
         MODULE-IDENTITY,
         NOTIFICATION-TYPE,
         Unsigned32,
         Counter32              FROM SNMPv2-SMI
         PhysicalIndex,
         entPhysicalIndex       FROM ENTITY-MIB
         hardentIND1Physical,
         chassisTraps,
         hardentIND1Chassis     FROM ALCATEL-IND1-BASE
         SnmpAdminString	       FROM SNMP-FRAMEWORK-MIB
         DisplayString,
	 MacAddress,
         TEXTUAL-CONVENTION     FROM SNMPv2-TC
         MODULE-COMPLIANCE,
         OBJECT-GROUP,
         NOTIFICATION-GROUP     FROM SNMPv2-CONF;


alcatelIND1ChassisMIB MODULE-IDENTITY
    LAST-UPDATED "200706180000Z"
    ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division"
    CONTACT-INFO
     "Please consult with Customer Service to ensure the most appropriate
      version of this document is used with the products in question:

                 Alcatel-Lucent, Enterprise Solutions Division
                (Formerly Alcatel Internetworking, Incorporated)
                        26801 West Agoura Road
                     Agoura Hills, CA  91301-5122
                       United States Of America

     Telephone:               North America  +1 800 995 2696
                              Latin America  +1 877 919 9526
                              Europe         +31 23 556 0100
                              Asia           +65 394 7933
                              All Other      +1 818 878 4507

     Electronic Mail:         support@ind.alcatel.com
     World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
     File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
    DESCRIPTION
	"This module describes an authoritative enterprise-specific Simple
        etwork Management Protocol (SNMP) Management Information Base (MIB):

        For the Birds Of Prey Product Line, this is the Chassis Supervision
	Chassis MIB
        for managing physical chassis objects not covered in the IETF
	Entity MIB (rfc 2737).

        The right to make changes in specification and other information
        contained in this document without prior notice is reserved.

        No liability shall be assumed for any incidental, indirect, special, or
        consequential damages whatsoever arising from or related to this
        document or the information contained herein.

        Vendors, end-users, and other interested parties are granted
        non-exclusive license to use this specification in connection with
        management of the products for which it is intended to be used.

                   Copyright (C) 1995-2007 Alcatel-Lucent
                       ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200906090000Z"
    DESCRIPTION
        "Added new object chasEntPhysPowerType and TEXTUAL-CONVENTION
        ChasEntPhysPowerType."

    REVISION      "200906260000Z"
    DESCRIPTION
        "Added new object chasEntPhysPowerControlChecksum."

    REVISION      "200706180000Z"

  DESCRIPTION
     "Addressing discrepancies with Alcatel Standard."
     ::= { hardentIND1Chassis 1 }

    alcatelIND1ChassisMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Managed Objects."
        ::= { alcatelIND1ChassisMIB 1 }

    alcatelIND1ChassisMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Conformance Information."
        ::= { alcatelIND1ChassisMIB 2 }

    alcatelIND1ChassisMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Units Of Conformance."
        ::= { alcatelIND1ChassisMIBConformance 1 }


    alcatelIND1ChassisMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Compliance Statements."
        ::= { alcatelIND1ChassisMIBConformance 2 }


    alcatelIND1ChassisPhysMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Managed Objects."
        ::= { hardentIND1Physical 1 }


    alcatelIND1ChassisPhysMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Conformance Information."
        ::= { hardentIND1Physical 2 }


    alcatelIND1ChassisPhysMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Units Of Conformance."
        ::= { alcatelIND1ChassisPhysMIBConformance 1 }


    alcatelIND1ChassisPhysMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Compliance Statements."
        ::= { alcatelIND1ChassisPhysMIBConformance 2 }


-- CONTROL MODULE TABLE

chasControlModuleTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ChasControlModuleEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table contains one row for the primary control module."
::= { alcatelIND1ChassisMIBObjects 1 }


chasControlModuleEntry OBJECT-TYPE
	SYNTAX ChasControlModuleEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Information about the primary control module. This table is an extension
	of the entity physical table but this class is instanciated only for a
	the primary control module that has a particular Index."
	INDEX { entPhysicalIndex }
::= { chasControlModuleTable 1 }


ChasControlModuleEntry ::= SEQUENCE
	{
		chasControlRunningVersion             INTEGER,
		chasControlActivateTimeout            INTEGER,
		chasControlVersionMngt                INTEGER,
		chasControlDelayedActivateTimer       Unsigned32,
		chasControlCertifyStatus              INTEGER,
		chasControlSynchronizationStatus      INTEGER,
		chasControlAcrossCmmWorkingSynchroStatus     INTEGER,
		chasControlAcrossCmmCertifiedSynchroStatus   INTEGER

	}


chasControlRunningVersion OBJECT-TYPE
	SYNTAX INTEGER
	{
		unknown(1),
		working(2),
		certified(3)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "Identification of the Running Version (or Running Configuration) for
        the control module. Note that the Running Version value of (1) unknown,
        (2) working, or (3) certified is returned."
::= { chasControlModuleEntry 1 }


chasControlActivateTimeout OBJECT-TYPE
	SYNTAX INTEGER (0..900)
        MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
        "This value is in seconds. It represents how much time before the
        switch automatically falls back to the certified version. This value
        is set via the Activate(reload working) cli command.
        An Activate reboot must be initiated via the primary CMM and that
        the timeout value can be accessed via user interface to the primary CMM
        only. After the Activate reboot has been initiated, a timeout will occur
        (i.e., an Activate Timeout) at the timeout value specified by the user.
        If a reboot cancel has not been received prior to the timeout expiration,
        the primary CMM will automatically reboot (i.e., re-reboot) using the
        certified configuration. This ensures that an automatic backup reboot is
        available using the certified configuration in the event that the user
        is unable to interface with primary CMM as a result of the attempted
        Activate reboot. If the Activate reboot is successful, the user cancels
        the backup reboot via the normal reboot cancellation process (i.e., a
        zero value is written for the object chasControlDelayedRebootTimer)."
::= { chasControlModuleEntry 2 }


chasControlVersionMngt OBJECT-TYPE
	SYNTAX INTEGER
	{
        notSignificant(1),
        certifySynchro(2),
        certifyNoSynchro(3),
        flashSynchro(4),
        restore(5),
        activate(6),
        issu(7)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
        "For the primary this means:
		notSignificant -	No command applied.
		certifySynchro -	Copy the file from the working to the certified
                            directory and from the primary to the secondary
                            (reboot of the secondary).
		certifyNoSynchro -	Copy the file from the working to the certified
                            directory.
		flashSynchro -		Copy the file from the primary to the secondary
                            (reboot of the secondary).
		restore -           Copy the file from the certified directory to the
                            working directory.
		activate -          Reload from the working directory. Activate can be
                            scheduled.
		issu -              In Service Software Upgrade (ISSU).  Process can
                            scheduled."

::= { chasControlModuleEntry 3 }


chasControlDelayedActivateTimer OBJECT-TYPE
	SYNTAX Unsigned32 (0..31622400)
        MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
        "Timer value in seconds used to initiate a delayed activate of the primary
        CMM. Writing this object to a non-zero value results in CMM reboot of the
        working  directory following expiration of the specified activate timer delay.
        Writing this object to zero results in an immediately activate process.
		It is now adjusted to wait a maximum of 366 days."
::= { chasControlModuleEntry 4 }



chasControlCertifyStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
		unknown(1),
		needCertify(2),
		certified(3)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Returned value indicates if the control module has been certified
     (that is the working directory matches the certified directory)"
::= { chasControlModuleEntry 5 }


chasControlSynchronizationStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
		unknown(1),
		monoControlModule(2),
		notSynchronized(3),
		synchronized(4)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Returned value indicates if the control module has been synchronized
     (that is the working directory matches the working directory
     on the other control module(s) if present).  Returned value is 
     monoControlModule when no other control module is present."
::= { chasControlModuleEntry 6 }


chasControlAcrossCmmWorkingSynchroStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
		monoCMM(2),
                no(3),
                yes(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Returned value indicates if the /working has been synchronized
     across the CMMs (that is the working directory matches the working directory
     on all CMMs if present)"
::= { chasControlModuleEntry 7 }

chasControlAcrossCmmCertifiedSynchroStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
		monoCMM(2),
                no(3),
                yes(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Returned value indicates if the /certified has been synchronized
	across the CMMs if present)"
::= { chasControlModuleEntry 8 }

-- CONTROL REDUNDANT TABLE


chasControlRedundantTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ChasControlRedundantEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table contains one row per control module. There is always at least
	one control module in the system."
::= { alcatelIND1ChassisMIBObjects 2 }


chasControlRedundantEntry OBJECT-TYPE
	SYNTAX ChasControlRedundantEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Information about a particular control module this table is an extension
	of the entity physical table but this class is instanciated only for a
	particular type of physical entity: the control module that has a
	particular Index."
	INDEX { entPhysicalIndex }
::= { chasControlRedundantTable 1 }


ChasControlRedundantEntry ::= SEQUENCE
	{
		chasControlNumberOfTakeover           Counter32,
		chasControlDelayedRebootTimer         Unsigned32
	}


chasControlNumberOfTakeover OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "This object is a count of the number of times the control module has
        changed from primary to secondary mode as a result of a Takeover. Note
        that this object can be accessed via user interface to either the
        primary or secondary CMM. The value returned is the number of times
        that the interfacing control module (either primary or secondary CMM)
        has changed from primary to secondary mode. This value does not reflect
        the total number of CMM Takeovers for the switch. To get the total
        number of Takeovers for the switch, it is necessary to read this value
        via user interface to each control module independently."
::= { chasControlRedundantEntry 1 }


chasControlDelayedRebootTimer OBJECT-TYPE
	SYNTAX Unsigned32 (0.. 31622400)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Timer value (in seconds) used to initiate a delayed reboot of the primary
	or secondary CMM using the certified configuration.  Writing this object to
	a non-zero value results in a CMM reboot following expiration of the
	specified reset timer delay.  Writing this object to zero results in
	cancellation of a pending CMM delayed reboot.
	It is now adjusted to wait a maximum of 366 days."
::= { chasControlRedundantEntry 2 }


 -- CHASSIS TABLE

chasChassisTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ChasChassisEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
        "This table contains one row per chassis. There is always at least one
         chassis or many like for stackable product."
::= { alcatelIND1ChassisMIBObjects 3 }


chasChassisEntry OBJECT-TYPE
	SYNTAX ChasChassisEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
    "Information about a particular control module this table is an extension
	 of the entity physical table but this class is instanciated only for a
	 particular type of physical entity: the control module that has a
	 particular Index."
	INDEX { entPhysicalIndex }
::= { chasChassisTable 1 }


ChasChassisEntry ::= SEQUENCE
    {
        chasFreeSlots               Unsigned32,
        chasPowerLeft               INTEGER,
        chasNumberOfResets          Counter32,
        chasHardwareBoardTemp       INTEGER,
        chasHardwareCpuTemp         INTEGER,
        chasTempRange               INTEGER,
        chasTempThreshold           INTEGER,
        chasDangerTempThreshold     INTEGER,
        chasPrimaryPhysicalIndex    INTEGER
    }


chasFreeSlots OBJECT-TYPE
	SYNTAX Unsigned32	(0..18)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The number of free NI front panel slots."
::= { chasChassisEntry 1 }


chasPowerLeft OBJECT-TYPE
	SYNTAX INTEGER (-100000..100000)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "The power still available on the chassis in Watts."
::= { chasChassisEntry 2 }


chasNumberOfResets OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "This object is a count of the number of times this station has been reset
         since a cold-start."
::= { chasChassisEntry 3 }

chasHardwareBoardTemp	OBJECT-TYPE
    SYNTAX		INTEGER	 (0..200)
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for this chassis.
         This temperature is what is used for comparing to the threshold and
         determining whether the value is in range."
::= { chasChassisEntry 4 }

chasHardwareCpuTemp	OBJECT-TYPE
    SYNTAX	        INTEGER	 (0..200)
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION
        "This object indicates the current output of the SPARC Temperature
         Sensor (degrees Centigrade) for this chassis.
         This object is not applicable for Hawk and 0 is returned"
::= { chasChassisEntry 5 }


chasTempRange OBJECT-TYPE
	SYNTAX INTEGER
	{
		unknown(1),
		notPresent(2),
		underThreshold(3),
		overFirstThreshold(4),
		overDangerThreshold(5)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "Temp Range is the value of the temperature sensor for the chassis. The
         Temp Range value reflects the temperature of the chassis relative to the
         Temp Threshold value (i.e., over vs. under the threshold)."
::= { chasChassisEntry 6 }


chasTempThreshold OBJECT-TYPE
	SYNTAX INTEGER (1..150)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
       "This object is the threshold temperature in degrees Celsius for the
        chassis. Temp Threshold is the chassis temperature point at which,
        when reached due to an ascending or descending temperature transition,
        a temperature notification is provided to the user. When this threshold
        is exceeded, we start sending traps and other operator notification."
::= { chasChassisEntry 7 }

chasDangerTempThreshold OBJECT-TYPE
	SYNTAX INTEGER (30..150)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "This Threshold is a second one which is hardcoded. When the
         Chassis Exceeds this value it starts shutting down NIs.
         This value will be set by the factory and not changeable."
::= { chasChassisEntry 8 }


chasPrimaryPhysicalIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "This value holds the Entity Table Physical Index for the Control
         Module that is currently primary. This is to allow snmp managers
         to determine which Control Module is currently primary so it knows
         what entry in the chasControlModuleTable to access for setting the
         chasControlVersionMngt values for controling the switch."
::= { chasChassisEntry 9 }


-- Extension of the Entity physical table

chasEntPhysicalTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ChasEntPhysicalEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table contains one row per physical entity. It is an extension for
	the entity physical table (rfc 2737) that is instantiated for every physical entity
	object. The fields are not always significant for every object."
::= { alcatelIND1ChassisPhysMIBObjects 1 }


chasEntPhysicalEntry OBJECT-TYPE
	SYNTAX ChasEntPhysicalEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Information about a particular physical entity."
	INDEX { entPhysicalIndex }
::= { chasEntPhysicalTable 1 }


ChasEntPhysLed ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Textual convention for physical LEDs.  Note: Due to European regulation, the LEDs
         will never be illuminated in red, but will be either green or amber."
    SYNTAX    INTEGER {
        notApplicable         (0),
        off                   (1),
        greenOn               (2),
        greenBlink            (3),
        amberOn               (4),
        amberBlink            (5)
    }

ChasEntPhysPowerType ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Textual convention for type of power supply."
    SYNTAX    INTEGER {
        notApplicable   (0),  -- entPhysicalClass for this physical entity
                              -- is not powerSupply.
        ac              (1),  -- Power Supply is AC
        dc              (2)   -- Power Supply is DC
    }

ChasEntPhysicalEntry ::= SEQUENCE
    {
        chasEntPhysAdminStatus                INTEGER,
        chasEntPhysOperStatus                 INTEGER,
        chasEntPhysLedStatus                  BITS,
        chasEntPhysPower                      INTEGER,
        chasEntPhysModuleType                 SnmpAdminString,
        chasEntPhysMfgDate                    SnmpAdminString,
        chasEntPhysPartNumber                 SnmpAdminString,
        chasEntPhysLedStatusOk1               ChasEntPhysLed,
        chasEntPhysLedStatusOk2               ChasEntPhysLed,
        chasEntPhysLedStatusPrimaryCMM        ChasEntPhysLed,
        chasEntPhysLedStatusSecondaryCMM      ChasEntPhysLed,
        chasEntPhysLedStatusTemperature       ChasEntPhysLed,
        chasEntPhysLedStatusFan               ChasEntPhysLed,
        chasEntPhysLedStatusFan1              ChasEntPhysLed,
        chasEntPhysLedStatusFan2              ChasEntPhysLed,
        chasEntPhysLedStatusFan3              ChasEntPhysLed,
        chasEntPhysLedStatusBackupPS          ChasEntPhysLed,
        chasEntPhysLedStatusInternalPS        ChasEntPhysLed,
        chasEntPhysLedStatusControl           ChasEntPhysLed,
        chasEntPhysLedStatusFabric            ChasEntPhysLed,
        chasEntPhysLedStatusPSU               ChasEntPhysLed, 
        chasEntPhysAsicRev                    SnmpAdminString,
        chasEntPhysCpldRev                    SnmpAdminString,
        chasEntPhysDefaultMinibootRev         SnmpAdminString,
        chasEntPhysBackUpMinibootRev          SnmpAdminString,
        chasEntPhysBootromRev                 SnmpAdminString,
        chasEntPhysNiNum                      INTEGER,
        chasEntPhysGbicNum                    INTEGER,
        chasEntPhysWaveLen                    INTEGER,
        chasEntPhysUbootRev                   SnmpAdminString,
        chasEntPhysUbootMinibootRev           SnmpAdminString,
        chasEntPhysMacAddress                 MacAddress,
        chasEntPhysPoeSwVersion               SnmpAdminString,
        chasEntPhysC20LFailCont               INTEGER,
        chasEntPhysCpuModel                   SnmpAdminString,
        chasEntPhysPowerType                  ChasEntPhysPowerType,
        chasEntPhysPowerControlChecksum       SnmpAdminString
    }


chasEntPhysAdminStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
		unknown(1),
		powerOff(2),
		powerOn(3),
		reset(4),
		takeover(5),
		resetAll(6),
		standby(7),
		resetWithFabric(8),
		takeoverWithFabrc(9)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	    "All modules (even empty slots) are in unknown state when the chassis
	     first powers up.

	Chassis status possible value:
		powerOn <=> powered up

	Control Module possible value:
		powerOn <=> CM up and running
		reset <=> CM reset
		takeover <=> Secondary CM takes over
		resetAll <=> resets the whole switch
	NI status possible value:
		powerOn <=> NI is either powered (up or down) or waiting to be powered
			whenever more power is available. This admin status has not full meaning
			without chasEntPhysOperStatus
		powerOff <=> NI down and unpowered and NI will not be powered until user
			requests it, a failover happens or a reboot happens
		reset <=> NI reset

	FABRIC status possible value:
		powerOn     <=> FABRIC is powered
		powerOff    <=> FABRIC is unpowered
		standby     <=> FABRIC is powered and requested to be redundant (inactive)

	Daughter board status possible value:
		powerOn <=> DB up and running
		reset <=> DB reset (TO BE CONFIRMED)

	Power supply status possible value:
		powerOn <=> PS up"
::= { chasEntPhysicalEntry 1 }


chasEntPhysOperStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
		up(1),
		down(2),
		testing(3),
		unknown(4),
		secondary(5),
		notPresent(6),
		unpowered(7),
		master(8)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"All modules (even empty slots) are in unknown state when the chassis
	first powers up.

	Chassis status possible value :
		up <=> powered up

	Control Module possible value :
		notPresent <=> CM not present
		up <=> CM up and running
		down <=> CM down and powered
		secondary <=> CM in secondary mode and running

	NI status possible value :
		notPresent <=> NI not present
		up <=> NI up and running
		down <=> NI down and powered
		unpowered <=> NI unpowered because there is not enough power in the system
			      (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF
			      (chasEntPhysAdminStatus = powerOff). This operational status has
                  not full meaning without chasEntPhysAdminStatus

	Fabric status possible value :
		master <=> up and acting as master
		up <=> up and acting as slave
		secondary <=> secondary mode for redundancy

	Daughter board status possible value :
		notPresent <=> DB not present
		up <=> DB up and running
		down <=> DB down and powered

	Power supply status possible value :
		notPresent <=> PS not present
		up <=> PS up"
::= { chasEntPhysicalEntry 2 }


chasEntPhysLedStatus OBJECT-TYPE
    SYNTAX BITS {
        ok1GreenLSBit(0),
        ok1GreenMSBit(1),
        ok1AmberLSBit(2),
        ok1AmberMSBit(3),
        ok2GreenLSBit(4),
        ok2GreenMSBit(5),
        ok2AmberLSBit(6),
        ok2AmberMSBit(7),
        controlGreenLSBit(8),
        controlGreenMSBit(9),
        controlAmberLSBIt(10),
        controlAmberMSBIt(11),
        fabricGreenLSBit(12),
        fabricGreenMSBit(13),
        fabricAmberLSBit(14),
        fabricAmberMSBit(15),
        tempGreenLSBit(16),
        tempGreenMSBit(17),
        tempAmberLSBit(18),
        tempAmberMSBit(19),
        fanGreenLSBit(20),
        fanGreenMSBit(21),
        fanAmberLSBit(22),
        fanAmberMSBit(23),
        powerSupGreenLSBit(24),
        powerSupGreenMSBit(25),
        powerSupAmberLSBit(26),
        powerSupAmberMSBit(27),
        backupPowerSupGreenLSBit(28),
        backupPowerSupGreenMSBit(29),
        backupPowerSupAmberLSBit(30),
        backupPowerSupAmberMSBit(31)
    }
	MAX-ACCESS read-only
	STATUS deprecated
	DESCRIPTION
	"This object has been deprecated because the other enumerated objects can provide the same information.
	A get to this object will return 0.

	The status of each of the LEDs of this module.

	Fuji CFM:

 	[31:30] BPSU amber      00=off    01=on    10=reserved    11=blinking
 	[29:28] PSU green       00=off    01=on    10=reserved    11=blinking
	[27:26] PSU amber       00=off    01=on    10=reserved    11=blinking 
	[25:24] PSU green       00=off    01=on    10=reserved    11=blinking 
	[23:22] Fan amber       00=off    01=on    10=reserved    11=blinking 
	[21:20] Fan green       00=off    01=on    10=reserved    11=blinking 
	[19:18] Temp amber      00=off    01=on    10=reserved    11=blinking 
	[17:16] Temp green      00=off    01=on    10=reserved    11=blinking 
	[15:14] Fabric amber    00=off    01=on    10=reserved    11=blinking 
	[13:12] Fabric green    00=off    01=on    10=reserved    11=blinking 
	[11:10] Control amber   00=off    01=on    10=reserved    11=blinking 
	[9:8]   Control green   00=off    01=on    10=reserved    11=blinking 
	[7:6]   OK2 amber       00=off    01=on    10=reserved    11=blinking
	[5:4]   OK2 green       00=off    01=on    10=reserved    11=blinking
	[3:2]   OK1 amber       00=off    01=on    10=reserved    11=blinking
	[1:0]   OK1 green       00=off    01=on    10=reserved    11=blinking

	Falcon CMM:

	[11]    Fan 		1=Green (ok)	0=amber (fail)
	[10]    Temperature	1=Green (ok)	0=amber (fail)
	[9]     Secondary CMM	1=amber		0=OFF
	[8]     Primary CMM	1=amber		0=OFF
	[7:6]   OK2 amber	00=off		01=on		10=blink	11=reserved
	[5:4]   OK2 green 	00=off		01=on		10=blink	11=reserved
	[3:2]   OK1 amber	00=off		01=on		10=blink	11=reserved
	[1:0]   OK1 green	00=off		01=on		10=blink	11=reserved

	Eagle CMM:

	[17:16] Fan 3 (rear)		00=amber	01=green	10=blink	11=reserved
	[15:14] Fan 2 (top right)	00=amber	01=green	10=blink	11=reserved
	[13:12] Fan 1 (top left)	00=amber	01=green	10=blink	11=reserved
	[11]    Status			1=Green (ok)	0=amber (fail)
	[10]    Temperature		1=Green (ok)	0=amber (fail)
	[9]     Secondary CMM		1=amber		0=OFF
	[8]     Primary CMM		1=amber		0=OFF
	[7:6]   OK2 amber		00=off		01=on		10=blink	11=reserved
	[5:4]   OK2 green		00=off		01=on		10=blink	11=reserved
	[3:2]   OK1 amber		00=off		01=on		10=blink	11=reserved
	[1:0]   OK1 green		00=off		01=on		10=blink	11=reserved


	Hawk Stack:

	[19]    fanGroup	1=Green (ok)	0=amber (fail)
	[18]    internalPS	1=Green (ok)	0=amber (fail)
	[11]    backupPS	1=Green (ok)	0=amber (fail)
	[10]    Temperature	1=Green (ok)	0=amber (fail)
	[9]     Secondary CMM	1=amber		0=OFF
	[8]     Primary CMM	1=amber		0=OFF
	[7:6]   OK2 amber	00=off		01=on		10=blink	11=reserved
	[5:4]   OK2 green 	00=off		01=on		10=blink	11=reserved
	[3:2]   OK1 amber	00=off		01=on		10=blink	11=reserved
	[1:0]   OK1 green	00=off		01=on		10=blink	11=reserved

	NI:

	[7:6]   OK2 amber	00=off	01=on	10=blink	11=reserved
	[5:4]   OK2 green	00=off	01=on	10=blink	11=reserved
	[3:2]   OK1 amber	00=off	01=on	10=blink	11=reserved
	[1:0]   OK1 green	00=off	01=on	10=blink	11=reserved


	FABRIC (Eagle Only):

	[7:6]	OK2 Yellow LED	01=on	00=off	10=blink	11=reserved
	[5:4]	OK2 Green LED	01=on	00=off  10=blink	11=reserved
	[3:2]	OK1 Yellow LED	01=on	00=off  10=blink	11=reserved
	[1:0]	OK1 Green LED	01=on	00=off	10=blink	11=reserved



NOTE: 	Due to European regulation, the LEDs will NEVER be illuminated RED!
	They in fact will be either green OR amber."

::= { chasEntPhysicalEntry 3 }

chasEntPhysPower OBJECT-TYPE
	SYNTAX      INTEGER (0..65535)
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
        "This value is only applicable to the NI, PS and Control Modules.  It
         corresponds to a a static value for the power consumption of an NI
         module or Control Module. This value is in Watts."
        ::= { chasEntPhysicalEntry 4 }

chasEntPhysModuleType OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is the unique Module Type or ID from the entities eeprom.
	     This value is guarrantteed to be unique to each type of Module.
	     This value is only intended for Alcatel internal use."
        ::= { chasEntPhysicalEntry 5 }

chasEntPhysMfgDate OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..11))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the manufacturing date of the entity.
         Its format is mmm dd yyyy : NOV 27 2001."
        ::= { chasEntPhysicalEntry 6 }

chasEntPhysPartNumber OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the Alcatel Part Number for the entity.
	     This value is used to identify what is
	     needed when placing orders with Alcatel."
        ::= { chasEntPhysicalEntry 7 }

chasEntPhysLedStatusOk1               OBJECT-TYPE 
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis Management Module (CMM) front panel LED OK1 status indication"
        ::= { chasEntPhysicalEntry 8 }

chasEntPhysLedStatusOk2               OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis Management Module (CMM) front panel LED OK2 status indication"
        ::= { chasEntPhysicalEntry 9 }

chasEntPhysLedStatusPrimaryCMM        OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis Management Module (CMM) front panel LED Primary chassis indication"
        ::= { chasEntPhysicalEntry 10 }

chasEntPhysLedStatusSecondaryCMM      OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis Management Module (CMM) front panel LED Secondary chassis indication"
        ::= { chasEntPhysicalEntry 11 }

chasEntPhysLedStatusTemperature       OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis Management Module (CMM) front panel LED temperature status indication"
        ::= { chasEntPhysicalEntry 12 }

chasEntPhysLedStatusFan               OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	    "For Hawk stacks used as a fan group status LED.  For eagle CMM's user instead:
	     Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)"
        ::= { chasEntPhysicalEntry 13 }

chasEntPhysLedStatusFan1              OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	    "Chassis fan status, Eagle (top left), Fuji (top right)"
        ::= { chasEntPhysicalEntry 14 }

chasEntPhysLedStatusFan2              OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	    "Chassis fan status, Eagle (top right), Fuji (middle right)"
        ::= { chasEntPhysicalEntry 15 }

chasEntPhysLedStatusFan3              OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	    "Chassis fan status, Eagle (rear), Fuji (bottom right)"
        ::= { chasEntPhysicalEntry 16 }

chasEntPhysLedStatusBackupPS          OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	    "Chassis backup power supply status indication"
        ::= { chasEntPhysicalEntry 17 }

chasEntPhysLedStatusInternalPS        OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis internal power supply status indication"
        ::= { chasEntPhysicalEntry 18 }

chasEntPhysLedStatusControl           OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis control status"
        ::= { chasEntPhysicalEntry 19 }

chasEntPhysLedStatusFabric            OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis Management Module (CMM) Fabric status indication"
        ::= { chasEntPhysicalEntry 20 }

chasEntPhysLedStatusPSU               OBJECT-TYPE
	SYNTAX     		ChasEntPhysLed
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
        "Chassis Power Supply Unit status indication"
        ::= { chasEntPhysicalEntry 21 }

chasEntPhysAsicRev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the ASIC revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 22 }

chasEntPhysCpldRev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the CPLD revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 23 }

chasEntPhysDefaultMinibootRev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the default miniboot version Number of the ni entity"
        ::= { chasEntPhysicalEntry 24 }

chasEntPhysBackUpMinibootRev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the backup miniboot version Number of the ni entity"
        ::= { chasEntPhysicalEntry 25 }

chasEntPhysBootromRev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the bootrom version Number of the ni entity"
        ::= { chasEntPhysicalEntry 26 }

chasEntPhysNiNum 		OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value is only applicable to the NI.  It indicates an NI associated with this physicalEntry"
        ::= { chasEntPhysicalEntry 27 }

chasEntPhysGbicNum 		OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value is only applicable to the NI.  It indicates a gbic associated with this ni"
        ::= { chasEntPhysicalEntry 28 }

chasEntPhysWaveLen 		OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the wave length of a SFP device"
        ::= { chasEntPhysicalEntry 29 }

chasEntPhysUbootRev 		OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the uboot version Number of the ni entity"
        ::= { chasEntPhysicalEntry 30 }

chasEntPhysUbootMinibootRev 		OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the uboot miniboot version Number of the ni entity"
        ::= { chasEntPhysicalEntry 31 }

chasEntPhysMacAddress             OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the MAC address of the ni entity"
        ::= { chasEntPhysicalEntry 32 }

chasEntPhysPoeSwVersion             OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the POE SW Revision of the ni entity"
        ::= { chasEntPhysicalEntry 33 }

chasEntPhysC20LFailCont             OBJECT-TYPE
    SYNTAX      INTEGER (0..65535) 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the C20L upgrade failure count of the ni entity"
        ::= { chasEntPhysicalEntry 34 }

chasEntPhysCpuModel               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the model description of the cmm/ni cpu"
        ::= { chasEntPhysicalEntry 35 }

chasEntPhysPowerType              OBJECT-TYPE
    SYNTAX      ChasEntPhysPowerType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the type(AC/DC) of power supply."
    ::= { chasEntPhysicalEntry 36 }

chasEntPhysPowerControlChecksum   OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the power control checksum."
    ::= { chasEntPhysicalEntry 37 }

-- CHASSIS SUPERVISION RFS TABLES

chasSupervisionRfsLsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ChasSupervisionRfsLsEntry
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION
        "This table contains a list of file on the remote chassis per directory."
        ::= { alcatelIND1ChassisMIBObjects 4 }

chasSupervisionRfsLsEntry OBJECT-TYPE
	SYNTAX          ChasSupervisionRfsLsEntry
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION
        "Information about a remote file.
         A row in this table contains a file per directory per chassis"
    INDEX { chasSupervisionRfsLsFileIndex }
        ::= { chasSupervisionRfsLsTable 1 }

ChasSupervisionRfsLsEntry ::= SEQUENCE
	{
		chasSupervisionRfsLsFileIndex     INTEGER,
		chasSupervisionRfsLsSlot          Unsigned32,
		chasSupervisionRfsLsDirName	      DisplayString (SIZE (0..255)),
		chasSupervisionRfsLsFileName      DisplayString (SIZE (0..33)),
		chasSupervisionRfsLsFileType      INTEGER,
		chasSupervisionRfsLsFileSize      Unsigned32,
		chasSupervisionRfsLsFileAttr      INTEGER,
   		chasSupervisionRfsLsFileDateTime  DisplayString (SIZE (0..16))
	}

chasSupervisionRfsLsFileIndex OBJECT-TYPE
	SYNTAX          INTEGER (1..100)
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION
        "This value holds file Index for the RFS LS table."
        ::= { chasSupervisionRfsLsEntry 1}

chasSupervisionRfsLsSlot OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION
        "Slot where remote file is located."
        ::= { chasSupervisionRfsLsEntry 2}

chasSupervisionRfsLsDirName OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..255))
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION
        "The remote directory name where remote file is located in"
	DEFVAL { "/flash" }
        ::= { chasSupervisionRfsLsEntry 3 }

chasSupervisionRfsLsFileName OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..33))
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION	"The file name of remote file"
	DEFVAL { "" }
        ::= { chasSupervisionRfsLsEntry 4 }

chasSupervisionRfsLsFileType OBJECT-TYPE
	SYNTAX          INTEGER	{
                        file(1),
                        directory(2),
                        undefined(3),
                        tarArchive(4)
                    }
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION	"The Type of a remote file"
	DEFVAL          { undefined }
        ::= { chasSupervisionRfsLsEntry 5 }

chasSupervisionRfsLsFileSize OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION	"size of this remote file"
	DEFVAL          { 0 }
        ::= { chasSupervisionRfsLsEntry 6 }

chasSupervisionRfsLsFileAttr OBJECT-TYPE
	SYNTAX          INTEGER {
                        undefined(1),
                        readOnly(2),
                        readWrite(3),
                        writeOnly(4)
                    }
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION	"attributes of this remote file"
	DEFVAL          { undefined }
        ::= { chasSupervisionRfsLsEntry 7 }

chasSupervisionRfsLsFileDateTime OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..16))
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION	"the modification date and time of a remote file"
	DEFVAL          { "" }
        ::= { chasSupervisionRfsLsEntry 8 }


chasSupervisionRfsDfTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ChasSupervisionRfsDfEntry
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "This table contains information about file system size and use."
        ::= { alcatelIND1ChassisMIBObjects 8 }

chasSupervisionRfsDfEntry OBJECT-TYPE
	SYNTAX          ChasSupervisionRfsDfEntry
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION     "This entry contains information about file system size and use."
    INDEX { chasSupervisionRfsDfSlot }
        ::= { chasSupervisionRfsDfTable 1 }

ChasSupervisionRfsDfEntry ::= SEQUENCE
	{
		chasSupervisionRfsDfSlot          INTEGER,
		chasSupervisionRfsDfFlashFree    Unsigned32,
		chasSupervisionRfsDfFlashSize     Unsigned32
	}

chasSupervisionRfsDfSlot OBJECT-TYPE
	SYNTAX          INTEGER 
			{
				slot1Flash(1),
				slot2Flash(2),
				slot3Flash(3),	
				slot4Flash(4),
				slot5Flash(5),
				slot6Flash(6),
				slot7Flash(7),
				slot8Flash(8),
				slot9Flash(9),
				slot10Flash(10),
				slot11Flash(11),
				slot12Flash(12),
				slot13Flash(13),
				slot14Flash(14),
				slot15Flash(15),
				slot16Flash(16),
				slot1Uflash(17),
				slot2Uflash(18),
				slot3Uflash(19),
				slot4Uflash(20),
				slot5Uflash(21),
				slot6Uflash(22),
				slot7Uflash(23),
				slot8Uflash(24),
				slot9Uflash(25),
				slot10Uflash(26),
				slot11Uflash(27),
				slot12Uflash(28),
				slot13Uflash(29),
				slot14Uflash(30),
				slot15Uflash(31),
				slot16Uflash(32)
			}
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION
        "CMM Slot where flash space is evaluated. 
	 Slot index 1-16 will return slot 1-16 flash drive information.
	 Slot index 17-32 will return slot 1-16 uflash drive information."
        ::= { chasSupervisionRfsDfEntry 1}

chasSupervisionRfsDfFlashFree OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION
        "Number bytes free on the file system."
        ::= { chasSupervisionRfsDfEntry 2}

chasSupervisionRfsDfFlashSize OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION
        "Number of total bytes on the file system."
        ::= { chasSupervisionRfsDfEntry 3}


chasSupervisionFlashMemTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ChasSupervisionFlashMemEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "This table contains the systems flash memory information."
        ::= { alcatelIND1ChassisMIBObjects 9 }

chasSupervisionFlashMemEntry OBJECT-TYPE
    SYNTAX          ChasSupervisionFlashMemEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "This contains one entry for the flash memory table."
    INDEX { chasSupervisionSlot }
        ::= { chasSupervisionFlashMemTable 1 }

ChasSupervisionFlashMemEntry ::= SEQUENCE
        {
                chasSupervisionSlot          INTEGER,
                chasSupervisionFlashSize     Unsigned32,
                chasSupervisionFlashFree     Unsigned32,
                chasSupervisionFlashUsed     INTEGER
        }

chasSupervisionSlot OBJECT-TYPE
    SYNTAX          INTEGER (1..8)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "CMM Slot where flash space is evaluated."
        ::= { chasSupervisionFlashMemEntry 1}

chasSupervisionFlashSize OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Flash memory size."
        ::= { chasSupervisionFlashMemEntry 2}

chasSupervisionFlashFree OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Number bytes free on file system."
        ::= { chasSupervisionFlashMemEntry 3}

chasSupervisionFlashUsed OBJECT-TYPE
    SYNTAX          INTEGER  (0..100)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A rounded up percentage of Flash Memory used."
        ::= { chasSupervisionFlashMemEntry 4}


chasSupervisionCmmCertifiedTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ChasSupervisionCmmCertifiedEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "This table contains..."
        ::= { alcatelIND1ChassisMIBObjects 10 }

chasSupervisionCmmCertifiedEntry OBJECT-TYPE
    SYNTAX          ChasSupervisionCmmCertifiedEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Information about..."
    INDEX { chasSupervisionCmmNum }
        ::= { chasSupervisionCmmCertifiedTable 1 }

ChasSupervisionCmmCertifiedEntry ::= SEQUENCE
        {
                chasSupervisionCmmNum INTEGER,
                chasSupervisionCmmCertifiedStatus INTEGER 
        }

chasSupervisionCmmNum OBJECT-TYPE
    SYNTAX          INTEGER (1..8)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "CMM Slot where /certified directory is evaluated."
        ::= { chasSupervisionCmmCertifiedEntry 1}

chasSupervisionCmmCertifiedStatus OBJECT-TYPE
	SYNTAX INTEGER
        {
                notPresent(0),
                yes(1),
                no(2)
        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        " The status of the CMM certified directory - certified or not."
        ::= { chasSupervisionCmmCertifiedEntry 2}


-- CHASSIS SUPERVISION FAN STATUS TABLE

alaChasEntPhysFanTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF AlaChasEntPhysFanEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
	    "This table contains one row per physical fan entity."
	::= { alcatelIND1ChassisMIBObjects 11 }

alaChasEntPhysFanEntry OBJECT-TYPE
	SYNTAX      AlaChasEntPhysFanEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
	    "Information about a particular fan in a chassis physical entity."
	INDEX { entPhysicalIndex, alaChasEntPhysFanLocalIndex }
	::= { alaChasEntPhysFanTable 1 }

AlaChasEntPhysFanEntry ::= SEQUENCE
	{
	    alaChasEntPhysFanLocalIndex    INTEGER,
	    alaChasEntPhysFanStatus        INTEGER
	}
    
alaChasEntPhysFanLocalIndex OBJECT-TYPE
	SYNTAX      INTEGER (1..65535)
	MAX-ACCESS	not-accessible
	STATUS      current
	DESCRIPTION
	    "Index to a chassis fan entity"
	::={ alaChasEntPhysFanEntry 1 }
    
alaChasEntPhysFanStatus OBJECT-TYPE
	SYNTAX      INTEGER
		    {
			noStatus(0),
			notRunning(1),
			running(2)
		    }
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
	    "Chassis fan operational status"
	::={alaChasEntPhysFanEntry 2}

-- CHASSIS SUPERVISION HASH CONTROL GLOBAL OBJECTS

alaChasHashMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        brief(1),
                        extended(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "When set to brief, Hash mode is enabled.
             When set to Extended, Hash mode is disabled."
	DEFVAL { extended }
        ::= { alcatelIND1ChassisMIBObjects 12 }

alaChasUdpTcpPortMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The control is used to enable or disable UDP TCP
             port hashing. This option is applicable only when 
             Hash mode is set to disabled (i.e. extended)"
	DEFVAL { disabled }
        ::= { alcatelIND1ChassisMIBObjects 13 }

-- CHASSIS SUPERVISION NON UCAST HASH CONTROL GLOBAL OBJECTS

alaChasNonUCHashControl OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        disable(0),
                        enable(1)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "This control is used to enable/disable
             Load balance for non unicast traffic."
	DEFVAL { disable }
        ::= { alcatelIND1ChassisMIBObjects 14 }

-- CHASSIS SUPERVISION RFS COMMANDS


alcatelIND1ChassisSupervisionRfsCommands OBJECT-IDENTITY
	STATUS current
    DESCRIPTION
        "Branch For Chassis Supervision RFS commands.
         For rrm command the Slot, Command and SrcFileName are mandatory.
         For rcp command the Slot, Command, SrcFileName and DestFileName
         are mandatory.  For rdf command the Slot and Command are mandatory"
        ::= { alcatelIND1ChassisMIBObjects 5 }

chasSupervisionRfsCommandsSlot OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS      read-create
	STATUS          current
	DESCRIPTION	"Slot where RFS command should be executed."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 1}

chasSupervisionRfsCommandsCommand OBJECT-TYPE
	SYNTAX          INTEGER {
                                notSignificant(0),
                                rrm(1),
                                rcp(2),
                                rls(3),
                                rdf(4),
                                reserved(5)
        			}
	MAX-ACCESS	read-create
	STATUS          current
	DESCRIPTION
        "This object identifies which of the above Actions is to be
         performed.  The commands are as follows:
                  - rrm   Remote file remove
                  - rcp   Remote file copy
                  - rls   Remote directory listing
                  - rdf   Remote flash disk space free"

        ::= { alcatelIND1ChassisSupervisionRfsCommands 2 }


chasSupervisionRfsCommandsSrcFileName OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..255))
	MAX-ACCESS      read-create
	STATUS          current
	DESCRIPTION
        "The remote file for where the RFS action is executed.
         This includes also the path so directory name and file name.
         This object is used when command set to rrm or rcp."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 3 }

chasSupervisionRfsCommandsDestFileName OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..255))
	MAX-ACCESS      read-create
	STATUS          current
	DESCRIPTION
                "The destination file for where the RFS action is executed.
                 This includes also the path so directory name and file name.
                 This object is used when command set to rcp."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 4 }

chasSupervisionRfsCommandsRlsDirName OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..255))
	MAX-ACCESS      read-create
	STATUS          current
	DESCRIPTION
               "The remote directory name where remote file is located in.
                This is used when command set to rls."
	DEFVAL { "/flash" }
        ::= { alcatelIND1ChassisSupervisionRfsCommands 5 }

chasSupervisionRfsCommandsRlsFileName OBJECT-TYPE
	SYNTAX          DisplayString (SIZE (0..33))
	MAX-ACCESS      read-create
	STATUS          current
	DESCRIPTION
               "The remote file name where remote file is located in.
                This is used when command set to rls."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 6 }

chasSupervisionRfsCommandsProcessingState OBJECT-TYPE
	SYNTAX          INTEGER {
        			    inProgress(1),
        			    ready(2)
                    }
	MAX-ACCESS	read-only
	STATUS          current
	DESCRIPTION	"command executing state for the previous set operation."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 7 }

chasSupervisionRfsCommandsStatusCode OBJECT-TYPE
	SYNTAX          INTEGER {
                        success(1),
                        slotIsPrimary(2),
                        slotNotExist(3),
                        directoryNotExist(4),
                        fileNotExist(5),
                        maximumFilesExceed(6),
                        noDiskSpace(7),
                        systemBusy(8),
                        systemError(9),
                        directoryNotAllowToRemove(10)
                    }
	MAX-ACCESS	read-only
	STATUS          current
	DESCRIPTION	"command completetion status error code."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 8 }


-- CHASSIS CONTROL RELOAD STATUS


chasControlReloadStatusTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF ChasControlReloadEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Table containing reload status of each network interface
				slot or stack module"
::= { alcatelIND1ChassisMIBObjects 6 }

chasControlReloadEntry OBJECT-TYPE
	SYNTAX		ChasControlReloadEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Entry of a network interface reload status"
	INDEX { chasControlReloadIndex }
::={ chasControlReloadStatusTable 1 }

ChasControlReloadEntry ::= SEQUENCE {
	chasControlReloadIndex		INTEGER,
	chasControlReloadStatus		INTEGER
}

chasControlReloadIndex OBJECT-TYPE
	SYNTAX 		INTEGER (1..16)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Entry of a network interface reload status"
	::= { chasControlReloadEntry 1 }

chasControlReloadStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
		reloadEnabled(1),
		reloadDisabled(2),
		noInterface(3),
		unknown(4)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Returned value indicates if the network interface module is
     enabled or disabled for reload."
	DEFVAL { reloadDisabled }
::= { chasControlReloadEntry 2 }


-- CHASSIS GLOBAL CONTROL OBJECTS


    chasGlobalControl   OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 7 }

chasGlobalControlDelayedResetAll OBJECT-TYPE
	SYNTAX INTEGER (-1..65535)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"This object is used to schedule a delayed reset all action.
	If set to -1 - cancel the timer, 0 - reset all immediately,
	any other value will start counting down the time until reset."
    DEFVAL { -1 }
::= { chasGlobalControl 1 }

chasGlobalControlLongCommand OBJECT-TYPE
	SYNTAX INTEGER
	{
        	none(1),
        	certifySynchro(2),
		certifyNoSynchro(3),
        	flashSynchro(4),
        	restore(5)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"This object is used to indicate whether a long-term action
	is in progress, and if so, what the action is."
    DEFVAL { none }
::= { chasGlobalControl 2 }

chasGlobalControlLongCommandStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
        	none(1),
        	inProgress(2),
		completeSuccess(3),
		completeFailure(4)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"This object it indicates the final disposition of the
	most recent long-term action."
    DEFVAL { none }
::= { chasGlobalControl 3 }

--
--Chassis traps mib : chassisTraps
--

--chassisTraps  OBJECT IDENTIFIER ::= { notificationIND1Traps 4 }

--Chassis traps definition

chassisTrapsDesc  OBJECT IDENTIFIER ::= { chassisTraps 1 }
chassisTrapsObj  OBJECT IDENTIFIER ::= { chassisTraps 2 }

--
--textual conventions
--

ChassisTrapsStrLevel ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"enumerated value which provide the
	urgency level of the STR."
    SYNTAX        INTEGER {
		 	  strNotFatal		(1), --recorverable
			  strApplicationFatal	(2), --not recorverable for the application
			  strFatal		(3)  --not recorverable for the board
		  }


ChassisTrapsStrAppID  ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"Application Identification number"
    SYNTAX        INTEGER (0..255)


ChassisTrapsStrSnapID  ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"Subapplication Identification number.
	we can have multiple snapIDs per
	Subapplication (task) but only one is
	to be used to send STRs."
    SYNTAX        INTEGER (0..255)


ChassisTrapsStrfileLineNb ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"Line number in the source file where the
	fault was detected. This is given by the C
	ANSI macro __LINE__."
    SYNTAX        INTEGER (1..65535)


ChassisTrapsStrErrorNb ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"Fault identifier. The error number
	identifies the kind the detected fault and
	allows a mapping of the data contained in
	chassisTrapsdataInfo."
    SYNTAX        INTEGER (0..65535)


ChassisTrapsStrdataInfo ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"Additional data provided to help to find out
	the origine of the fault. The contain and the
	significant portion are varying in accordance
	with chassisTrapsStrErrorNb. The lenght of this
	field is expressed in bytes."
    SYNTAX  OCTET STRING (SIZE (0..63))

ChassisTrapsObjectType ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"An enumerated value which provides the object type
	involved in the alert trap."
    SYNTAX        INTEGER {
        chassis           (1),
        ni                (2),
        powerSuply        (3),
        fan               (4),
        cmm               (5),
        fabric            (6),
        gbic              (7)
    }


ChassisTrapsObjectNumber ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"A number defining the order of the object in the
	set. EX: The number of the considered fan or power
	supply. This intend to clarify as much as possible
	the location of the failure or alert. An instance
	of the appearance of the trap could be:
	failure on a module. Power supply 3.  "
    SYNTAX        INTEGER  (0..255)

ChassisTrapsAlertNumber ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
	"this number identify the alert among all the
	possible chassis alert causes."
    SYNTAX        INTEGER {
        runningWorking	                (1),   -- The working version is used
        runningCertified	            (2),   -- The certified version is used

        certifyStarted	                (3),   -- CERTIFY process started
        certifyFlashSyncStarted	        (4),   -- CERTIFY w/FLASH SYNCHRO process started
        certifyCompleted                (5),   -- CERTIFY process completed successfully
        certifyFailed	                (6),   -- CERTIFY process failed
        synchroStarted	                (7),   -- Flash Synchronization process started
        synchroCompleted	            (8),   -- Flash Synchronization completed successfully
        synchroFailed	                (9),   -- Flash Synchronization failed

        restoreStarted	                (10),   -- RESTORE process started
        restoreCompleted	            (11),   -- RESTORE process completed successfully
        restoreFailed	                (12),   -- RESTORE process failed

        takeoverStarted	                (13),   -- CMM take-over being processed
        takeoverDeferred	            (14),   -- CMM take-over deferred
        takeoverCompleted	            (15),   -- CMM take-over completed

        macAllocFailed	                (16),   -- CMS MAC allocation failed
        macRangeFailed	                (17),   -- CMS MAC range addition failed

        fanFailed	                    (18),   -- One or more of the fans is inoperable
        fanOk		                    (19),   -- Fan is operable
        fansOk		                    (20),   -- All fans are operable

        tempOverThreshold	            (21),   -- CMM temperature over the threshold
        tempUnderThreshold	            (22),   -- CMM temperature under the threshold
        tempOverDangerThreshold	        (23),   -- CMM temperature over danger threshold

        powerMissing	                (24),   -- Not enough power available
        psNotOperational	            (25),   -- Power Supply is not operational
        psOperational	                (26),   -- Power supply is operational
        psAllOperational	            (27),   -- All power supplies are operational

        redundancyNotSupported	        (28),   -- Hello protocol disabled, Redundancy not supported
        redundancyDisabledCertifyNeeded (29),   -- Hello protocol disabled, Certify needed
        cmmStartingAsPrimary	        (30),   -- CMM started as primary
        cmmStartingAsSecondary	        (31),   -- CMM started as secondary
        cmmStartupCompleted	            (32),   -- end of CMM start up

        cmmAPlugged	                    (33),   -- cmm a plugged
        cmmBPlugged	                    (34),   -- cmm b plugged
        cmmAUnPlugged	                (35),   -- cmm a unplugged
        cmmBUnPlugged	                (36),   -- cmm b unplugged

        lowNvramBattery	                (37),   -- NV RAM battery is low
        notEnoughFabricsOperational     (38),   -- Not enough Fabric boards operational
        simplexNoSynchro	            (39),   -- Only simplex CMM no flash synchro done

        secAutoActivate	                (40),   -- secondary CMM autoactivating
        secAutoCertifyStarted	        (41),   -- secondary CMM autocertifying
        secAutoCertifyCompleted         (42),   -- secondary CMM autocertify end
        secInactiveReset                (43),   -- cmm b unplugged

        activateScheduled               (44),   -- ACTIVATE process scheduled
        activateStarted                 (45),   -- secondary CMM reset because of inactivity

        getAfileCompleted               (46),   -- Get A file process completed
        getAfileFailed                  (47),   -- Failed to get a file from other CMM/Stack

        sysUpdateStart                  (48),   -- sysUpdate starts
        sysUpdateInProgress             (49),   -- sysUpdate in progress
        sysUpdateError                  (50),   -- sysUpdate error
        sysUpdateEnd                    (51),   -- sysUpdate ends
        reloadInProgress                (52),   -- the system is already in reload workign process
        c20UpgradeOk                    (53),	-- the c20 license upgrade ok
        c20UpgradeFailed                (54),   -- the c20 license upgrade failed
        c20RestoreOk                    (55),   -- the c20 license restore ok
        c20RestoreFailed                (56),   -- the c20 license restore failed
        c20NiFailed                     (57)    -- the c20 ni board reports failure
    }

--
--object i.e. trap description
--

chassisTrapsStr NOTIFICATION-TYPE
    OBJECTS {
        chassisTrapsStrLevel            ,
        chassisTrapsStrAppID            ,
        chassisTrapsStrSnapID           ,
        chassisTrapsStrfileName         ,
        chassisTrapsStrfileLineNb       ,
        chassisTrapsStrErrorNb          ,
        chassisTrapsStrcomments         ,
        chassisTrapsStrdataInfo
    }
    STATUS        current
    DESCRIPTION
       "A Software Trouble report is sent by whatever application
	encountering a problem during its execution and would
	want to aware the user of for maintenance purpose.	"
::= { chassisTrapsDesc 0 1 }

chassisTrapsAlert NOTIFICATION-TYPE
    OBJECTS {
        physicalIndex                   ,
        chassisTrapsObjectType          ,
        chassisTrapsObjectNumber        ,
        chassisTrapsAlertNumber         ,
        chassisTrapsAlertDescr
    }
    STATUS        current
    DESCRIPTION
       "generic trap notifying something changed in the chassis
	whatever it's a failure or not				"
::= { chassisTrapsDesc 0 2 }


chassisTrapsStateChange NOTIFICATION-TYPE
    OBJECTS {
        physicalIndex                   ,
        chassisTrapsObjectType          ,
        chassisTrapsObjectNumber        ,
        chasEntPhysOperStatus
    }
    STATUS        current
    DESCRIPTION
       "A status change was detected"
::= { chassisTrapsDesc 0 3 }

--
-- objects used in the traps.
--
chassisTrapsStrLevel    OBJECT-TYPE
	SYNTAX     		ChassisTrapsStrLevel
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"An enumerated value which provides the
	urgency level of the STR."
	::= {chassisTrapsObj 1}

chassisTrapsStrAppID    OBJECT-TYPE
	SYNTAX     		ChassisTrapsStrAppID
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"Application Identification number"
	::= {chassisTrapsObj 2}

chassisTrapsStrSnapID   OBJECT-TYPE
	SYNTAX     		ChassisTrapsStrSnapID
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"Subapplication Identification number.
	we can have multiple snapIDs per
	Subapplication (task) but only one is
	to be used to send STRs."
	::= {chassisTrapsObj 3}

chassisTrapsStrfileName    OBJECT-TYPE
	SYNTAX     		SnmpAdminString(SIZE(0..19))
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"Name of the source file where the fault
	was detected. This is given by the C ANSI
	macro __FILE__. The path shouldn't appear."
	::= {chassisTrapsObj 4}

chassisTrapsStrfileLineNb    OBJECT-TYPE
	SYNTAX     		ChassisTrapsStrfileLineNb
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"Line number in the source file where the
	fault was detected. This is given by the C
	ANSI macro __LINE__."
	::= {chassisTrapsObj 5}

chassisTrapsStrErrorNb    OBJECT-TYPE
	SYNTAX     		ChassisTrapsStrErrorNb
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"Fault identificator. The error number
	identify the kind the detected fault and
	allow a mapping of the data contained in
	chassisTrapsdataInfo."
	::= {chassisTrapsObj 6}

chassisTrapsStrcomments    OBJECT-TYPE
	SYNTAX     		SnmpAdminString(SIZE(0..63))
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"comment text explaning the fault."
	::= {chassisTrapsObj 7}

chassisTrapsStrdataInfo    OBJECT-TYPE
	SYNTAX     		ChassisTrapsStrdataInfo
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"Additional data provided to help to find out
	the origine of the fault. The contain and the
	significant portion are varying in accordance
	with chassisTrapsStrErrorNb. The lenght of this
	field is expressed in bytes."
	::= {chassisTrapsObj 8}

chassisTrapsObjectType    OBJECT-TYPE
	SYNTAX     		ChassisTrapsObjectType
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"enumerated value which provide the object type
	involved in the alert trap."
	::= {chassisTrapsObj 9}

chassisTrapsObjectNumber    OBJECT-TYPE
	SYNTAX     		ChassisTrapsObjectNumber
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"number defining the order of the object in the
	set. EX: number of the considered fan or power
	supply. This intend to clarify as much as possible
	the location of the failure or alert. A instance
	of the appearance of the trap could be:
	failure on a module. Power supply 3.  "
	::= {chassisTrapsObj 10}

chassisTrapsAlertNumber    OBJECT-TYPE
	SYNTAX     		ChassisTrapsAlertNumber
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"this number identify the alert among all the
	possible chassis alert causes."
	::= {chassisTrapsObj 11}

chassisTrapsAlertDescr    OBJECT-TYPE
	SYNTAX     		SnmpAdminString(SIZE(0..127))
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION
	"description of the alert matching chassisTrapsAlertNumber"
	::= {chassisTrapsObj 12}

physicalIndex    	  OBJECT-TYPE
    SYNTAX      		PhysicalIndex
    MAX-ACCESS  		read-only
    STATUS      		current
    DESCRIPTION
    "The Physical index of the involved object."
    ::= { chassisTrapsObj 13 }

-- END Trap Objects


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    alcatelIND1ChassisMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for Chassis Supervision."
        MODULE
            MANDATORY-GROUPS
            {
                chasControlModuleGroup               ,
                chasControlRedundantGroup            ,
                chasChassisGroup                     ,
                chasControlReloadStatusGroup         ,
                chasGlobalControlGroup               ,
                chassisNotificationGroup             ,
                alaChasEntPhysFanGroup               ,
                alaChasHashControlGroup
            }

        ::= { alcatelIND1ChassisMIBCompliances 1 }

    alcatelIND1ChassisPhysMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for Chassis Supervision Physical."
        MODULE
            MANDATORY-GROUPS
            {
                chasEntPhysicalGroup                 ,
                chassisPhysNotificationGroup
            }

        ::= { alcatelIND1ChassisPhysMIBCompliances 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    chasControlModuleGroup OBJECT-GROUP
        OBJECTS
        {
            chasControlRunningVersion            ,
            chasControlActivateTimeout           ,
            chasControlVersionMngt               ,
            chasControlDelayedActivateTimer
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 1 }

    chasControlRedundantGroup OBJECT-GROUP
        OBJECTS
        {
            chasControlNumberOfTakeover	     ,
            chasControlDelayedRebootTimer
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Redundant Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 2 }

    chasChassisGroup OBJECT-GROUP
        OBJECTS
        {
            chasFreeSlots           ,
            chasPowerLeft           ,
            chasNumberOfResets      ,
            chasHardwareBoardTemp   ,
            chasHardwareCpuTemp     ,
            chasTempRange           ,
            chasTempThreshold       ,
            chasDangerTempThreshold ,
            chasPrimaryPhysicalIndex
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Chassis Group."
        ::= { alcatelIND1ChassisMIBGroups 3 }

    chasControlReloadStatusGroup OBJECT-GROUP
        OBJECTS
        {
            chasControlReloadStatus
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision NI Reload Status Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 4 }

    chasGlobalControlGroup OBJECT-GROUP
        OBJECTS
        {
            chasGlobalControlDelayedResetAll,
            chasGlobalControlLongCommand,
            chasGlobalControlLongCommandStatus
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Global Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 5 }

    chassisNotificationGroup NOTIFICATION-GROUP
        NOTIFICATIONS
        {
            chassisTrapsStr                  ,
            chassisTrapsAlert
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Notification Group."
        ::= { alcatelIND1ChassisMIBGroups 6 }

    alaChasEntPhysFanGroup OBJECT-GROUP
        OBJECTS
        {
            alaChasEntPhysFanStatus
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Physical Fan Group."
        ::= { alcatelIND1ChassisMIBGroups 7 }

    alaChasHashControlGroup OBJECT-GROUP
        OBJECTS
        {
            alaChasHashMode,
            alaChasUdpTcpPortMode
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Hash Control Group."
        ::= { alcatelIND1ChassisMIBGroups 8 }

    chasEntPhysicalGroup OBJECT-GROUP
        OBJECTS
        {
            chasEntPhysAdminStatus                ,
            chasEntPhysOperStatus                 ,
            chasEntPhysLedStatus                  ,
            chasEntPhysPower                      ,
            chasEntPhysModuleType                 ,
            chasEntPhysMfgDate                    ,
            chasEntPhysPartNumber                 ,
            chasEntPhysLedStatusOk1               ,
            chasEntPhysLedStatusOk2               ,
            chasEntPhysLedStatusPrimaryCMM        ,
            chasEntPhysLedStatusSecondaryCMM      ,
            chasEntPhysLedStatusTemperature       ,
            chasEntPhysLedStatusFan               ,
            chasEntPhysLedStatusFan1              ,
            chasEntPhysLedStatusFan2              ,
            chasEntPhysLedStatusFan3              ,
            chasEntPhysLedStatusBackupPS          ,
            chasEntPhysLedStatusInternalPS        ,
            chasEntPhysLedStatusControl           ,
            chasEntPhysLedStatusFabric            ,
            chasEntPhysLedStatusPSU               ,
            chasEntPhysPowerType                  ,
            chasEntPhysPowerControlChecksum 
        }
        STATUS  current
        DESCRIPTION
            "Chassis (inclosure) Entity Physical Group."
        ::= { alcatelIND1ChassisPhysMIBGroups 1 }

    chassisPhysNotificationGroup NOTIFICATION-GROUP
        NOTIFICATIONS
        {
            chassisTrapsStr                  ,
            chassisTrapsAlert                ,
            chassisTrapsStateChange
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Physical Notification Group."
        ::= { alcatelIND1ChassisPhysMIBGroups 2 }

END