1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
|
ALCATEL-IND1-INLINE-POWER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
pethPsePortEntry, pethMainPseEntry
FROM POWER-ETHERNET-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
softentIND1InLinePower, pethTraps
FROM ALCATEL-IND1-BASE;
alcatelIND1INLINEPOWERMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary InLinePower Extensions MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { softentIND1InLinePower 1 }
alaPethObjects OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 1 }
alaPethConformance OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 2 }
alaPethMain OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 3 }
-- PSE Objects
alaPethPsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaPethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that augments the standard pethPsePortTable
entry by adding the alaPethPsePortPowerMaximum object."
::= { alaPethObjects 1 }
alaPethPsePortEntry OBJECT-TYPE
SYNTAX AlaPethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the power
characteristics of a power Ethernet PSE port."
AUGMENTS { pethPsePortEntry }
::= { alaPethPsePortTable 1 }
AlaPethPsePortEntry ::= SEQUENCE {
alaPethPsePortPowerMaximum
INTEGER,
alaPethPsePortPowerActual
INTEGER,
alaPethPsePortPowerStatus
INTEGER,
alaPethPsePortPowerClass
INTEGER
}
alaPethPsePortPowerMaximum OBJECT-TYPE
SYNTAX INTEGER ( 3000 .. 20000 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls maximum amount of power per port."
::= { alaPethPsePortEntry 1 }
alaPethPsePortPowerActual OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 30000 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the actual amount of power used by a port"
::= { alaPethPsePortEntry 2 }
alaPethPsePortPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
powerOn(1),
powerOff(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the power status of a port"
::= { alaPethPsePortEntry 3 }
alaPethPsePortPowerClass OBJECT-TYPE
SYNTAX INTEGER {
class0 (0),
class1 (1),
class2 (2),
class3 (3),
class4 (4),
class5 (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object controls class of poe device attached on a port.
class0 - The device can draw PD power from 0.44W to 12.95W and
current less than 5.0 mA.
class1 - The device can draw PD power from 0.44W to 3.84W and
current 10.5 mA.
class2 - The device can draw PD power from 3.84W to 6.49W and
current 12.95 mA.
class3 - The device can draw PD power from 6.49W to 12.95W and
current 28 mA.
class4 - This class is reserved for future use.
class5 - No Powered Device is connected to this POE port, or the
port is powered down."
::= { alaPethPsePortEntry 4 }
-- Main PSE Objects
alaPethMainPseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaPethMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the standard table PethMainPseTable by allowing the
admin status for a group to be set to on/off as well as
showing the values for the max power for that group."
::= { alaPethObjects 2 }
alaPethMainPseEntry OBJECT-TYPE
SYNTAX AlaPethMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the Main power
of a PSE. "
AUGMENTS { pethMainPseEntry }
::= { alaPethMainPseTable 1 }
AlaPethMainPseEntry ::= SEQUENCE {
alaPethMainPseAdminStatus
INTEGER,
alaPethMainPseMaxPower
Integer32,
alaPethMainPsePriorityDisconnect
INTEGER,
alaPethMainPseCapacitorDetect
INTEGER,
alaPethMainPsePriority
INTEGER,
alaPethMainPseComboPort
INTEGER
}
alaPethMainPseAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to set the status of the main PSE to ON or OFF."
::= { alaPethMainPseEntry 1 }
alaPethMainPseMaxPower OBJECT-TYPE
SYNTAX Integer32 (36..800)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum amount of power allowed for main PSE."
::= { alaPethMainPseEntry 2 }
alaPethMainPsePriorityDisconnect OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to set the priority disconnect of the
main PSE to Enabled or Disable."
::= { alaPethMainPseEntry 3 }
alaPethMainPseCapacitorDetect OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to enable or disable the PowerDsine
Capacitor detection method."
::= { alaPethMainPseEntry 4 }
alaPethMainPsePriority OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
high(2),
low(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is set the power down priority for the slot"
::= { alaPethMainPseEntry 5 }
alaPethMainPseComboPort OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to set the combo port option of the
main PSE to Enable or Disable."
::= { alaPethMainPseEntry 6 }
--
-- Conformance Section
--
alaPethCompliances OBJECT IDENTIFIER ::= { alaPethConformance 1 }
alaPethGroups OBJECT IDENTIFIER ::= { alaPethConformance 2 }
alaPethCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the
Alcatel Power Ethernet MIB."
MODULE -- this module
GROUP alaPethPsePortGroup
DESCRIPTION
"The alaPethPsePortGroup is mandatory for systems which
implement PSE ports."
GROUP alaPethMainPseGroup
DESCRIPTION
"The pethMainPseGroup is mandatory for systems which
implement main power supply within a PSE Device."
::= { alaPethCompliances 1 }
alaPethPseCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the PSE"
MODULE -- this module
MANDATORY-GROUPS {alaPethPsePortGroup, alaPethMainPseGroup}
::= { alaPethCompliances 2 }
alaPethPsePortGroup OBJECT-GROUP
OBJECTS {
alaPethPsePortPowerMaximum,
alaPethPsePortPowerActual,
alaPethPsePortPowerStatus,
alaPethPsePortPowerClass
}
STATUS current
DESCRIPTION
"The pethPsePortGroup is mandatory for systems which
implement PSE ports."
::= { alaPethGroups 1 }
alaPethMainPseGroup OBJECT-GROUP
OBJECTS {
alaPethMainPseAdminStatus,
alaPethMainPseMaxPower,
alaPethMainPsePriorityDisconnect,
alaPethMainPseCapacitorDetect,
alaPethMainPsePriority,
alaPethMainPseComboPort
}
STATUS current
DESCRIPTION
"Main PSE Objects. "
::= { alaPethGroups 2 }
-- Peth Main
alaPethMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaPethMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that augments the standard pethPsePortTable
entry by adding the alaPethPsePortPowerMaximum object."
::= { alaPethMain 1 }
alaPethMainEntry OBJECT-TYPE
SYNTAX AlaPethMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the power
characteristics of a power Ethernet PSE port."
INDEX { alaPethMainIndex }
::= { alaPethMainTable 1 }
AlaPethMainEntry ::= SEQUENCE {
alaPethMainIndex
Integer32,
alaPethMainPowerRedundancy
INTEGER
}
alaPethMainIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the group to which
power Ethernet PSE is connected.Group means (box in the stack,
module in a rack) and the value 1 MUST be used for non-modular
devices "
::= { alaPethMainEntry 1 }
alaPethMainPowerRedundancy OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls power supply redundancy."
::= { alaPethMainEntry 2 }
-- Notification Objects
alaPethNotificationObjects OBJECT IDENTIFIER ::= { alaPethObjects 3 }
pethSourceSlot OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number of generating entity."
::= { alaPethNotificationObjects 1 }
pethSourcePort OBJECT-TYPE
SYNTAX INTEGER (1..48)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port number of generating entity."
::= { alaPethNotificationObjects 2 }
-- NOTIFICATIONS
pethPwrSupplyConflict NOTIFICATION-TYPE
OBJECTS {
pethSourceSlot
}
STATUS current
DESCRIPTION
"Power supply type conflict trap."
::= { pethTraps 0 1 }
pethPwrSupplyNotSupported NOTIFICATION-TYPE
OBJECTS {
pethSourceSlot
}
STATUS current
DESCRIPTION
"Power supply not supported trap."
::= { pethTraps 0 2 }
END
|
