path: root/MIBS/nokia/ALCATEL-IND1-PIM-MIB

ALCATEL-IND1-PIM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,
	IpAddress, Integer32, TimeTicks
		FROM SNMPv2-SMI
	RowStatus
		FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
    	FROM SNMPv2-CONF
	routingIND1Pim
		FROM ALCATEL-IND1-BASE;

alcatelIND1PIMMIB MODULE-IDENTITY

    LAST-UPDATED  "200704030000Z"
    ORGANIZATION  "Alcatel-Lucent"
    CONTACT-INFO
        "Please consult with Customer Service to ensure the most appropriate
         version of this document is used with the products in question:

                    Alcatel-Lucent, Enterprise Solutions Division
                   (Formerly Alcatel Internetworking, Incorporated)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America

        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507

        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):

             This proprietary MIB contains management information for 
             the configuration of PIM-SM and PIM-DM global configuration 
             parameters.

         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.

         No liability shall be assumed for any incidental, indirect, special, or
         consequential damages whatsoever arising from or related to this
         document or the information contained herein.

         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.

                     Copyright (C) 1995-2007 Alcatel-Lucent
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200704030000Z"
    DESCRIPTION
        "The latest version of this MIB Module."

    ::= { routingIND1Pim 1 }

alcatelIND1PIMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 1 }

alaPimsmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 1 }
alaPimsmDebugConfig  OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 2 }
alaPimdmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 3 }

-- ************************************************************************
--  PIM-SM Global Configuration
-- ************************************************************************

alaPimsmAdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-SM protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 1}


alaPimsmAdminBSRAddress    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
               "The IP address used to source the bootstrap message when
                the router is configured to be a candidate bootstrap
                router (C-BSR).  This IP address should belong to a
                PIM-enabled VLAN."
    ::= {alaPimsmGlobalConfig 2 }

alaPimsmAdminBSRHashmasklen   OBJECT-TYPE
    SYNTAX     Integer32 (1..32)
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "The length (in bits) of the mask to use in the hash 
                function when computing the rendezvous point (RP) for a
                multicast group.  This value may be changed to facilitate
                vendor inter-operability.  For IPV4 we recommend a value 
                of 30."
    DEFVAL     { 30 }
    ::= {alaPimsmGlobalConfig 3 }

alaPimsmAdminBSRPriority   OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS     obsolete
    DESCRIPTION
               "The candidate bootstrap router's (C-BSR) priority.  The
                C-BSR with the biggest priority value will be elected
                as the BSR for this domain."
    DEFVAL     { 0 }
    ::= {alaPimsmGlobalConfig 4 }

alaPimsmCRPExpiryTime   OBJECT-TYPE
    SYNTAX     Integer32 (1..300)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "The maximum time a PIM-SM router considers the current 
		        candidate rendezvous point (C-RP) active."
    DEFVAL     { 300 }
    ::= {alaPimsmGlobalConfig 5 }

alaPimsmCRPInterval    OBJECT-TYPE
    SYNTAX     Integer32 (1..300)
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "This is the interval at which the candidate rendezvous
                point router's advertisements (C-RP-Adv) are sent
                to the bootstrap router."
    DEFVAL     { 60 }
    ::= { alaPimsmGlobalConfig 6 }

alaPimsmAdminCRPAddress   OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "The IP Address of the C-RP when this router is configured
                to be a Candidate RP.  This IP address should belong to
                a PIM-enabled vlan.  The value of 0 indicates that
                this router is not configured to be a C-RP."
    DEFVAL     { 0 }
    ::= {alaPimsmGlobalConfig 7 }

alaPimsmAdminCRPPriority   OBJECT-TYPE
    SYNTAX     Integer32 (0..128)
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "The candidate rendezvous point (C-RP) router's
                priority.  A lower numeric value denotes a higher
                priority."
    DEFVAL     { 0 }
    ::= {alaPimsmGlobalConfig 8 }

alaPimsmDataTimeout    OBJECT-TYPE
    SYNTAX     Integer32 (1..300)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "This is the time after which (S,G) state for a
                silent source will be deleted."
    DEFVAL     { 210 }
    ::= { alaPimsmGlobalConfig 9 }

alaPimsmMaxRPs    OBJECT-TYPE
    SYNTAX     Integer32 (1..100)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "The maximum number of C-RPs allowed in the PIM-SM
                domain."
    DEFVAL     { 32 }
    ::= { alaPimsmGlobalConfig 10 }

alaPimsmProbeTime OBJECT-TYPE
    SYNTAX     Integer32 (1..300)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "When NULL Registers are used, this is the time
                between sending a NULL Register and the Register-
                Suppression-Timer expiring unless it is restarted
                by receiving a Register-Stop."
    DEFVAL     { 5 }
    ::= { alaPimsmGlobalConfig 11}

alaPimsmOldRegisterMessageSupport    OBJECT-TYPE
    SYNTAX      INTEGER {
                    header(1),
                    full(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
               "Specifies the application of the checksum function on
                received Register messages in the PIM-SM domain.  When
                set to full(2), the checksum for a register message
                is computed for the entire packet (i.e. includes data).
                When set to header(1), the checksum is done only on the
                first 8 bytes of the packet.  This variable is provided
                for interoperability reasons and may be required for
                Compatibility with older implementations of PIM-SM v2.
                This parameter must be set the same throughout the
                PIM-SM domain."
    DEFVAL     { header }
    ::= { alaPimsmGlobalConfig 12 }

alaPimsmRegisterSuppressionTimeout OBJECT-TYPE
    SYNTAX     Integer32 (1..300)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "This is the amount of time a Designated Router (DR) will
                stop sending Registers on behalf of sources to the RP
                once a Register-Stop has been received."
    DEFVAL     { 60 }
    ::= { alaPimsmGlobalConfig 13}

alaPimsmAdminStaticRPConfig     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "Administratively enables/disables Static RP
                Configuration on this router."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 14 }

-- The PIM Static-RP Table

alaPimsmStaticRPTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF AlaPimsmStaticRPEntry
    MAX-ACCESS not-accessible
    STATUS     obsolete
    DESCRIPTION
            "The (conceptual) table listing the IP multicast groups 
            to be used in the group-to-RP mapping when
            the value of alaPimsmAdminStaticRPConfig is enabled."
    ::= { alaPimsmGlobalConfig 15 }

alaPimsmStaticRPEntry OBJECT-TYPE
    SYNTAX     AlaPimsmStaticRPEntry
    MAX-ACCESS not-accessible
    STATUS     obsolete
    DESCRIPTION
            "An entry (conceptual row) in the alaPimsmStaticRPTable."
    INDEX      { alaPimsmStaticRPGroupAddress,
                 alaPimsmStaticRPGroupMask, alaPimsmStaticRPAddress }
    ::= { alaPimsmStaticRPTable 1 }

AlaPimsmStaticRPEntry ::= SEQUENCE {
    alaPimsmStaticRPGroupAddress    IpAddress,
    alaPimsmStaticRPGroupMask       IpAddress,
    alaPimsmStaticRPAddress         IpAddress,
    alaPimsmStaticRPRowStatus       RowStatus
}

alaPimsmStaticRPGroupAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     obsolete
    DESCRIPTION
            "The IP multicast group address which, when combined with
            alaPimsmStaticRPGroupMask, identifies a group prefix to be
            used in the group-to-rp mapping algorithm."
    ::= { alaPimsmStaticRPEntry 1 }

alaPimsmStaticRPGroupMask OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     obsolete
    DESCRIPTION
            "The multicast group address mask which, when combined with
            alaPimsmStaticRPGroupMask, identifies a group prefix to be
            used in the group-to-rp mapping algorithm."
    ::= { alaPimsmStaticRPEntry 2 }

alaPimsmStaticRPAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     obsolete
    DESCRIPTION
            "The (unicast) address of the interface which will be
            an RP."
    ::= { alaPimsmStaticRPEntry 3 }

alaPimsmStaticRPRowStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     obsolete
    DESCRIPTION
            "The status of this row, by which new entries may be
            created, or old entries deleted from this table."
    ::= { alaPimsmStaticRPEntry 4 }


alaPimsmAdminSPTConfig     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables SPT Switchover
                upon receiving the first data packet."
    DEFVAL     { enable }
    ::= {alaPimsmGlobalConfig 16 }

alaPimsmRPThreshold     OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the RP threshold value (in bps) to be used
                in determining when to switch to native
                forwarding at the RP.  The value of 0
                disables the RP Threshold functionality."
    DEFVAL     { 1 }
    ::= {alaPimsmGlobalConfig 17 }

alaPimsmV6AdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-SM IPv6 protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 18 }

alaPimsmV6SPTConfig     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables PIM IPv6 SPT Switchover
                upon receiving the first data packet."
    DEFVAL     { enable }
    ::= {alaPimsmGlobalConfig 19 }

alaPimsmV6RPSwitchover     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether PIM IPv6
                will attempt to switch to native forwarding at the RP
                upon receiving the first register-encapsulated packet."
    DEFVAL     { enable }
    ::= {alaPimsmGlobalConfig 20 }


-- ************************************************************************
--  PIM-SM Debug Configuration
-- ************************************************************************

alaPimsmDebugLevel     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebug 
                Configuration"
    DEFVAL     { 0 }
    ::= {alaPimsmDebugConfig 1}

alaPimsmDebugError     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugError
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 2}

alaPimsmDebugHello     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugHello
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 3}

alaPimsmDebugNbr     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugNbr
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 4}

alaPimsmDebugBootstrap     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of 
                alaDrcTmPimsmDebugBootstrap MIB Object of alaDrcTmPimsmDebug 
                Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 5}

alaPimsmDebugCRP     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugCRP
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 6}

alaPimsmDebugRoute     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugRoute
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 7}

alaPimsmDebugJoinPrune     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of 
                alaDrcTmPimsmDebugJoinPrune MIB Object of alaDrcTmPimsmDebug 
                Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 8}

alaPimsmDebugAssert     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugAssert
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 9}

alaPimsmDebugTime     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugTime
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 10}

alaPimsmDebugIgmp     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugIgmp
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 11}

alaPimsmDebugSpt     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugSpt
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 12}

alaPimsmDebugMip     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugMip
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 13}

alaPimsmDebugInit     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugInit
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 14}

alaPimsmDebugTm     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugTm
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 15}

alaPimsmDebugIpmrm     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugIpmrm
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 16}

alaPimsmDebugMisc     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugMisc
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 17}

alaPimsmDebugAll     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     deprecated
    DESCRIPTION
               "This Object is deprecated in favor of alaDrcTmPimsmDebugAll
                MIB Object of alaDrcTmPimsmDebug Configuration"
    DEFVAL     { disable }
    ::= {alaPimsmDebugConfig 18}

-- ************************************************************************
--  PIM-DM Global Configuration
-- ************************************************************************

alaPimdmAdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-DM protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimdmGlobalConfig 1}

alaPimdmStateRefreshTimeToLive OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "The TTL to be used by this router's originated State
                 Refresh messages if the data packet's TTL is not
                 recorded."
    DEFVAL { 16 }
    ::= {alaPimdmGlobalConfig 2}

alaPimdmStateRefreshLimitInterval OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This router will not forward successive State Refresh
                 messages received at less than this interval."
    DEFVAL { 0 }
    ::= {alaPimdmGlobalConfig 3}

alaPimdmV6AdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-DM IPv6 protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimdmGlobalConfig 4}


-- conformance information

alcatelIND1PIMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 2 }
alcatelIND1PIMMIBCompliances OBJECT IDENTIFIER ::= 
                                          { alcatelIND1PIMMIBConformance 1 }
alcatelIND1PIMMIBGroups      OBJECT IDENTIFIER ::= 
                                          { alcatelIND1PIMMIBConformance 2 }


-- compliance statements

alaPimsmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running PIM Sparse
            Mode and implementing the ALCATEL-IND1-PIM MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { alaPimsmConfigMIBGroup, alaPimsmDebugMIBGroup }

    ::= { alcatelIND1PIMMIBCompliances 1 }

alaPimdmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running PIM Dense
            Mode and implementing the ALCATEL-IND1-PIM MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { alaPimdmConfigMIBGroup }

    ::= { alcatelIND1PIMMIBCompliances 2 }

-- units of conformance

alaPimsmConfigMIBGroup OBJECT-GROUP
    OBJECTS { alaPimsmAdminStatus, alaPimsmAdminBSRAddress,
              alaPimsmAdminBSRHashmasklen, alaPimsmAdminBSRPriority,
              alaPimsmCRPExpiryTime, alaPimsmCRPInterval,
              alaPimsmAdminCRPAddress, alaPimsmAdminCRPPriority,
              alaPimsmDataTimeout, alaPimsmMaxRPs,
              alaPimsmProbeTime, alaPimsmOldRegisterMessageSupport,
              alaPimsmRegisterSuppressionTimeout,
              alaPimsmAdminStaticRPConfig, alaPimsmStaticRPRowStatus, 
			  alaPimsmAdminSPTConfig, alaPimsmRPThreshold,
              alaPimsmV6AdminStatus, alaPimsmV6SPTConfig,
              alaPimsmV6RPSwitchover
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of global
            configuration parameters of PIM Sparse Mode routers."
    ::= { alcatelIND1PIMMIBGroups 1 }

alaPimsmDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaPimsmDebugLevel, alaPimsmDebugError,
              alaPimsmDebugHello, alaPimsmDebugNbr,
              alaPimsmDebugBootstrap, alaPimsmDebugCRP,
              alaPimsmDebugRoute, alaPimsmDebugJoinPrune,
              alaPimsmDebugAssert, alaPimsmDebugTime,
              alaPimsmDebugIgmp, alaPimsmDebugSpt,
              alaPimsmDebugMip, alaPimsmDebugInit,
              alaPimsmDebugTm, alaPimsmDebugIpmrm,
              alaPimsmDebugMisc, alaPimsmDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of PIM Sparse Mode routers."
    ::= { alcatelIND1PIMMIBGroups 2 }

alaPimdmConfigMIBGroup OBJECT-GROUP
    OBJECTS { alaPimdmAdminStatus, alaPimdmStateRefreshTimeToLive,
              alaPimdmStateRefreshLimitInterval,
              alaPimdmV6AdminStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of global
            configuration parameters of PIM Dense Mode routers."
    ::= { alcatelIND1PIMMIBGroups 3 }

END