path: root/MIBS/nokia/ALCATEL-IND1-SAA-MIB

ALCATEL-IND1-SAA-MIB DEFINITIONS ::= BEGIN

        IMPORTS
            OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY,
            Integer32, Unsigned32, Counter32
                                                      FROM SNMPv2-SMI
            SnmpAdminString
                                                      FROM SNMP-FRAMEWORK-MIB

            OBJECT-GROUP,MODULE-COMPLIANCE
                                                      FROM SNMPv2-CONF

            DateAndTime, DisplayString, TruthValue,
            RowStatus, MacAddress                     FROM SNMPv2-TC

            InetAddressType, InetAddress              FROM INET-ADDRESS-MIB

	    softentIND1Saa			      FROM ALCATEL-IND1-BASE                
            
            Dot1agCfmMaintDomainName,
            Dot1agCfmMaintAssocName                   FROM IEEE8021-CFM-MIB; 
        
         alcatelIND1SaaMIB MODULE-IDENTITY
	    LAST-UPDATED "200907210000Z"     -- 07/21/2009 00:00GMT
            ORGANIZATION "Alcatel - Architects Of An Internet World"
            CONTACT-INFO
                "Please consult with Customer Service to insure the most appropriate
                 version of this document is used with the products in question:

                        Alcatel Internetworking, Incorporated
                       (Division 1, Formerly XYLAN Corporation)
                               26801 West Agoura Road
                            Agoura Hills, CA  91301-5122
                              United States Of America

                Telephone:           North America  +1 800 995 2696
                                     Latin America  +1 877 919 9526
                                     Europe         +31 23 556 0100
                                     Asia           +65 394 7933
                                     All Other      +1 818 878 4507

                Electronic Mail:         support@ind.alcatel.com
                World Wide Web:          http://www.ind.alcatel.com
                File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

            DESCRIPTION
                "This module describes an authoritative enterprise-
                specific Simple Network Management Protocol (SNMP) Management
                Information Base (MIB):

                For the Birds Of Prey Product Line
                Service Assurance agent.


                The right to make changes in specification and other information
                contained in this document without prior notice is reserved.

                No liability shall be assumed for any incidental, indirect,
                special, or consequential damages whatsoever arising from or
                related to this document or the information contained herein.

                Vendors, end-users, and other interested parties are granted
                non-exclusive license to use this specification in connection with
                management of the products for which it is intended to be used.

                Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
                             ALL RIGHTS RESERVED WORLDWIDE"

            REVISION      "200907210000Z"

            DESCRIPTION
                "The mib for SAA module"
                ::= { softentIND1Saa 1}

-- --------------------------------------------------------------
--
-- Sections of the  Saa MIB
-- --------------------------------------------------------------
      alcatelIND1SaaNotifications OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
            "Branch for Saa Notifications."
        ::= { alcatelIND1SaaMIB 0 }

      alcatelIND1SaaMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
        "Branch For Saa Objects."
        ::= { alcatelIND1SaaMIB 1 }

      alcatelIND1SaaMIBConformance OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
            "Branch for Saa Module MIB Subsystem Conformance Information."
        ::= { alcatelIND1SaaMIB 2 }

      alcatelIND1SaaMIBGroups OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
            "Branch for Saa Module MIB Subsystem Units of Conformance."
        ::= { alcatelIND1SaaMIBConformance 1 }

      alcatelIND1SaaMIBCompliances OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
            "Branch for Saa Module MIB Subsystem Compliance Statements."
        ::= { alcatelIND1SaaMIBConformance 2 }


-- --------------------------------------------------------------
--      DESCRIPTION:
--         "control table data for the Saa Module.
--         "
--  --------------------------------------------------------------

      alaSaaCtrlConfig  OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 1 }

      alaSaaCtrlTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AlaSaaCtrlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Defines the SAA control table for providing, via SNMP, the 
           capability of performing SAA test operations.
          "
        ::= { alaSaaCtrlConfig  1 }

      alaSaaCtrlEntry OBJECT-TYPE
        SYNTAX     AlaSaaCtrlEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
          "An entry in the alaSaaCtrlTable  table, containing information on
	  the Saa function for a single instance of the Saa.
          "
        INDEX { 
                alaSaaCtrlOwnerIndex,
                alaSaaCtrlTestIndex
              }
        ::= { alaSaaCtrlTable 1 }

      AlaSaaCtrlEntry ::=
        SEQUENCE {
          alaSaaCtrlOwnerIndex		   SnmpAdminString,
          alaSaaCtrlTestIndex		         SnmpAdminString,
          alaSaaCtrlRowStatus		         RowStatus,
          alaSaaCtrlDescr		         DisplayString,
          alaSaaCtrlAdminStatus		   INTEGER,
          alaSaaCtrlTestMode		         INTEGER,
          alaSaaCtrlRuns		         Counter32,
          alaSaaCtrlFailures		         Counter32,
          alaSaaCtrlLastRunResult		   INTEGER,
          alaSaaCtrlLastRunTime		   DateAndTime,
          alaSaaCtrlInterval		         Integer32,
          alaSaaCtrlStartAt		         DateAndTime,
          alaSaaCtrlStopAt		         DateAndTime,
          alaSaaCtrlMaxHistoryRows  	   Integer32
        }

     alaSaaCtrlOwnerIndex OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..32))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Owner name to identify entries in the table.
           This is currently not supported and its value
           will always be the string 'USER'.
          "
        DEFVAL { "USER" }
        ::= { alaSaaCtrlEntry 1 }

     alaSaaCtrlTestIndex OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..32))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Unique name to identify the entries in the table. 
           The name is unique across various SNMP users.
          "
        ::= { alaSaaCtrlEntry 2 }

     alaSaaCtrlRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "This object allows entries to be created and deleted in the table.
          "
        ::= { alaSaaCtrlEntry 3 }

     alaSaaCtrlDescr OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "User provided description string for the SAA.
          "
	DEFVAL { "DEFAULT" }
        ::= { alaSaaCtrlEntry 4 }

     alaSaaCtrlAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER  {
			start(0),
			stop(1)
			}
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Indicates wether to start or stop the SAA test.
          "
        ::= { alaSaaCtrlEntry 5 }

     alaSaaCtrlTestMode OBJECT-TYPE
        SYNTAX      INTEGER {
                        undefined(0),
                        ipSaa(1),
                        ethSaa(2)
                        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The type of SAA test to be performed. The undefined value corresponds to the case
          when an entry is created in the alaSaaCtrlTable table without specifying a value for 
	  this object. This value shall be updated when the user creates an entry for the
	  corresponding saa in the alaSaaIpCtrlTable table or alaSaaEthoamCtrlTable table.
          "
	DEFVAL { undefined }
        ::= { alaSaaCtrlEntry 6 }

     alaSaaCtrlRuns OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Indicates number of times SAA test has been executed.
          "
        ::= { alaSaaCtrlEntry 7 }

     alaSaaCtrlFailures OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Indicates the number of times this SAA test has failed.
          "
        ::= { alaSaaCtrlEntry 8 }

    alaSaaCtrlLastRunResult OBJECT-TYPE
        SYNTAX      INTEGER  {
                        undetermined(0),
                        success(1),
			failed(2),
                        aborted(3)
                        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The result of the latest SAA test iteration.
          "
        ::= { alaSaaCtrlEntry 9 }

     alaSaaCtrlLastRunTime OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last iteration of the SAA was run.
          "
        ::= { alaSaaCtrlEntry 10 }

     alaSaaCtrlInterval OBJECT-TYPE
        SYNTAX      Integer32 (10..1500)
	UNITS       "minutes"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Interval, in minutes, between two iterations of the SAA test.
          "
	  DEFVAL { 150 }
        ::= { alaSaaCtrlEntry 11 }

     alaSaaCtrlStartAt OBJECT-TYPE
        SYNTAX      DateAndTime (SIZE(8))
	MAX-ACCESS  read-create	
        STATUS      current
        DESCRIPTION
          "Specifies the time at which the SAA test 
           is to be started. The deci-seconds specified in DateAndTime
           has no significance in scheduling SAA. The year in DateAndTime
	   must be in the range from 1970 to 2037.
          "
        ::= { alaSaaCtrlEntry 12 }

     alaSaaCtrlStopAt OBJECT-TYPE
        SYNTAX      DateAndTime (SIZE(8))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the time at which the SAA test 
           is to be stopped.Special value for DataAndTime which is
	   9999-12-31,23:59:59.0 is used to reset the existing configured 
           value of this object, indicating that the SAA test should never stop.
	   The deci-seconds in the DateAndTime has no significance in scheduling
	   SAA.The year in DateAndTime must be in the range from 1970 to 2037.
          "
        ::= { alaSaaCtrlEntry 13 }

     alaSaaCtrlMaxHistoryRows OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the maximum number of iterations for which
           history data is maintained.
          "
        DEFVAL { 5 }
        ::= { alaSaaCtrlEntry 14 }


-- ***************************************************************
--      DESCRIPTION:
--                      "control table data for the Ip-Saa.
--                     " 
-- ***************************************************************

      alaSaaIpCtrlConfig  OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 2 }

      alaSaaIpCtrlTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AlaSaaIpCtrlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "It defines the ping Control Table for providing the ping capability
          via SNMP. The results of these tests are stored in the alaSaaIpResultsTable
          and alaSaaIpHistoryTable.
          "
        ::= { alaSaaIpCtrlConfig  1 }

      alaSaaIpCtrlEntry OBJECT-TYPE
        SYNTAX      AlaSaaIpCtrlEntry 
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Entry for the alaSaaIpCtrl table.
          "
        INDEX {
                alaSaaIpCtrlOwnerIndex,
                alaSaaIpCtrlTestIndex
              }
        ::= { alaSaaIpCtrlTable 1 }

      AlaSaaIpCtrlEntry ::=
        SEQUENCE {
                  alaSaaIpCtrlOwnerIndex   	SnmpAdminString,
                  alaSaaIpCtrlTestIndex	   	SnmpAdminString,
                  alaSaaIpCtrlRowStatus      	RowStatus,
                  alaSaaIpCtrlTestMode          INTEGER,
                  alaSaaIpCtrlTgtAddrType       InetAddressType,
                  alaSaaIpCtrlTgtAddress        InetAddress,
                  alaSaaIpCtrlSrcAddrType       InetAddressType,
                  alaSaaIpCtrlSrcAddress        InetAddress,
                  alaSaaIpCtrlPayloadSize       Integer32,
                  alaSaaIpCtrlNumPkts           Integer32,	
                  alaSaaIpCtrlInterPktDelay     Integer32,	
                  alaSaaIpCtrlTypeOfService     Integer32,
                  alaSaaIpCtrlVRFId             Integer32,
                  alaSaaIpCtrlTotalPktsSent     Counter32,
                  alaSaaIpCtrlTotalPktsRcvd     Counter32,
                  alaSaaIpCtrlMinRTT            Integer32,
                  alaSaaIpCtrlAvgRTT            Integer32,
                  alaSaaIpCtrlMaxRTT            Integer32,
                  alaSaaIpCtrlMinJitter         Integer32,
                  alaSaaIpCtrlAvgJitter         Integer32,
                  alaSaaIpCtrlMaxJitter         Integer32,
                  alaSaaIpCtrlTSMinRTT          DateAndTime,
                  alaSaaIpCtrlTSMaxRTT          DateAndTime,
                  alaSaaIpCtrlTSMinJitter       DateAndTime,
                  alaSaaIpCtrlTSMaxJitter       DateAndTime                             
                 }

     alaSaaIpCtrlOwnerIndex OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..32))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Owner name to identify entries in the table.
           This is currently not supported and its value
           will always be the string 'USER'.
          "
        DEFVAL { "USER" }
        ::= { alaSaaIpCtrlEntry 1 }

      alaSaaIpCtrlTestIndex OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..32))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Unique name to identify the entries in the table. 
           This name is unique across various SNMP users.
          "
        ::= { alaSaaIpCtrlEntry 2 }

      alaSaaIpCtrlRowStatus      OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Allows entries to be created and deleted in the table. 
	  createAndWait value is not supported for this object.
          "
        ::= { alaSaaIpCtrlEntry 3 }

      alaSaaIpCtrlTestMode          OBJECT-TYPE
        SYNTAX      INTEGER {
				icmpEcho(1)
                            }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the type of ping test defined by this entry.
	    "
        ::= { alaSaaIpCtrlEntry 4 }

      alaSaaIpCtrlTgtAddrType       OBJECT-TYPE
        SYNTAX      InetAddressType(1)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the InetAddress type of host address to be used as the destination 
          for performing a ping operation. InetAddressIPv4(1) is the only type currently
          supported.
          "
	DEFVAL { 1 }
        ::= { alaSaaIpCtrlEntry 5 }

      alaSaaIpCtrlTgtAddress        OBJECT-TYPE
        SYNTAX      InetAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the IP host address to be used as the destination for 
           performing a ping operation.
          "
        ::= { alaSaaIpCtrlEntry 6 }

      alaSaaIpCtrlSrcAddrType       OBJECT-TYPE
        SYNTAX      InetAddressType(1)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the InetAddress type of host address to be used as the source for 
          performing a ping operation. InetAddressIPv4(1) is the only type currently
          supported.
          "
	DEFVAL { 1 }
        ::= { alaSaaIpCtrlEntry 7 }

      alaSaaIpCtrlSrcAddress        OBJECT-TYPE
        SYNTAX      InetAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the IP host address to be used as the source for performing
          a ping operation. The default value of this object is 0.0.0.0 if 
          alaSaaIpCtrlSrcAddrType is set to ipv4.
          "
        ::= { alaSaaIpCtrlEntry 8 }

      alaSaaIpCtrlPayloadSize        OBJECT-TYPE
        SYNTAX      Integer32 (24..1472)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the size of the ICMP payload to be used for the ping operation.
          "
	DEFVAL { 24 }
        ::= { alaSaaIpCtrlEntry 9 }

       alaSaaIpCtrlNumPkts        OBJECT-TYPE
        SYNTAX      Integer32 (1..10)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the number of packets to be sent in one ping iteration.
          "
	DEFVAL { 5 }
        ::= { alaSaaIpCtrlEntry 10 }

      alaSaaIpCtrlInterPktDelay     OBJECT-TYPE
        SYNTAX      Integer32 (100..1000)
	UNITS       "milli-seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the delay between two consecutive packets transmitted 
           during a ping iteration.The value specified should be a multiple
           of 100.
          "
	DEFVAL { 1000 }
        ::= { alaSaaIpCtrlEntry 11 }

      alaSaaIpCtrlTypeOfService     OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the type of service
          "
	DEFVAL { 0 }
        ::= { alaSaaIpCtrlEntry 12 }

      alaSaaIpCtrlVRFId     OBJECT-TYPE
        SYNTAX      Integer32 (0..4096)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Specifies the VRF ID. Only the value '0' is
           currently supported.
          "
        ::= { alaSaaIpCtrlEntry 13 }

      alaSaaIpCtrlTotalPktsSent  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the total number of packets sent during all the ping iterations.
          "
        ::= { alaSaaIpCtrlEntry 14 }

      alaSaaIpCtrlTotalPktsRcvd   OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the total number of packets received during all the ping iterations.
          "
        ::= { alaSaaIpCtrlEntry 15 }

      alaSaaIpCtrlMinRTT    OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the minimum round trip time among all the iterations of the SAA.
          "
        ::= { alaSaaIpCtrlEntry 16 }

      alaSaaIpCtrlAvgRTT   OBJECT-TYPE
        SYNTAX      Integer32 
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the average round trip time of all the iterations of the SAA.
          "
        ::= { alaSaaIpCtrlEntry 17 }

      alaSaaIpCtrlMaxRTT    OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the maximum round trip time among all the iterations of the SAA.
          "
        ::= { alaSaaIpCtrlEntry 18 }

      alaSaaIpCtrlMinJitter   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the minimum jitter among all the iterations of the SAA.
          "
        ::= { alaSaaIpCtrlEntry 19 }

      alaSaaIpCtrlAvgJitter   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the average jitter of all the iterations of the SAA.
          "
        ::= { alaSaaIpCtrlEntry 20 }

      alaSaaIpCtrlMaxJitter   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the maximum jitter among all the iterations of the SAA.
          "
        ::= { alaSaaIpCtrlEntry 21 }

     alaSaaIpCtrlTSMinRTT    OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the timestamp of the iteration that gave the minimum 
           packet delay.
          "
        ::= { alaSaaIpCtrlEntry 22 }

     alaSaaIpCtrlTSMaxRTT    OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the timestamp of the iteration that gave the maximum 
           packet delay.
          "
        ::= { alaSaaIpCtrlEntry 23 }

     alaSaaIpCtrlTSMinJitter   OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the timestamp of the iteration that gave the minimum 
           packet jitter.
          "
        ::= { alaSaaIpCtrlEntry 24 }

     alaSaaIpCtrlTSMaxJitter   OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the timestamp of the iteration that gave the maximum 
           packet jitter.
          "
        ::= { alaSaaIpCtrlEntry 25 }


-- ***************************************************************
--      DESCRIPTION:
--                      "Results table data for the Ip-Saa.
--                     " 
-- ***************************************************************

      alaSaaIpResults  OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 3 }

      alaSaaIpResultsTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AlaSaaIpResultsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Defines the IP Results Table for providing
           the capability of performing IP Ping operations. The 
           results of these operations are stored in the 
           alaSaaIpResultsTable and the alaSaaIpHistoryTable.
 
           An entry is removed from the alaSaaIpResultsTable when
           its corresponding alaSaaCtrlEntry is deleted.
          "
        ::= { alaSaaIpResults  1 }

      alaSaaIpResultsEntry OBJECT-TYPE
        SYNTAX      AlaSaaIpResultsEntry 
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Entry for the alaSaaResults table.

           An entry in this table summarizes results from multiple
           invocations of the test configured by the corresponding
           entry in alaSaaIpCtrlTable.
          "
        INDEX {
                alaSaaIpCtrlOwnerIndex,
                alaSaaIpCtrlTestIndex,
                alaSaaIpResultsTestRunIndex
              }
        ::= { alaSaaIpResultsTable 1 }

      AlaSaaIpResultsEntry ::=
        SEQUENCE {
                  alaSaaIpResultsTestRunIndex 	   Unsigned32,
                  alaSaaIpResultsPktsSent          Counter32,
                  alaSaaIpResultsPktsRcvd          Counter32,
                  alaSaaIpResultsInterPktDelay     Integer32,
                  alaSaaIpResultsRunResult 	   INTEGER,
		  alaSaaIpResultsRunResultReason   OCTET STRING,
	   	  alaSaaIpResultsRunTime  	   DateAndTime,
                  alaSaaIpResultsMinRTT            Integer32,
                  alaSaaIpResultsAvgRTT            Integer32,
                  alaSaaIpResultsMaxRTT            Integer32,
                  alaSaaIpResultsMinJitter         Integer32,
                  alaSaaIpResultsAvgJitter         Integer32,
                  alaSaaIpResultsMaxJitter         Integer32
                 }

      alaSaaIpResultsTestRunIndex   OBJECT-TYPE
        SYNTAX      Unsigned32 (1..4294967295)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "The value of alaSaaIpResultsTestRunIndex identifies the
           row entry that reports results for a single OAM test run.

           The value of this object starts from 1 and can go upto a 
           maximum of alaSaaCtrlMaxHistoryRows.
          "
        ::= { alaSaaIpResultsEntry 1 }

      alaSaaIpResultsPktsSent   OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the number of packets sent during a single ping iteration.
          "
        ::= { alaSaaIpResultsEntry 2 }

      alaSaaIpResultsPktsRcvd     OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the number of packets received during a single ping iteration.
          "
        ::= { alaSaaIpResultsEntry 3 }

      alaSaaIpResultsInterPktDelay   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Specifies the inter-packet-delay with which the packets were sent 
           in the iteration.
          "
        ::= { alaSaaIpResultsEntry 4 }

       alaSaaIpResultsRunResult OBJECT-TYPE
        SYNTAX      INTEGER {
                        undetermined(0),
                        success(1),
			      failed(2),
                        aborted(3)
                        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The result of the iteration.
          "
        ::= { alaSaaIpResultsEntry 5 }

       alaSaaIpResultsRunResultReason  OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "If the iteration fails, this field indicates the reason
           for failure. If the reason for failure cannot be determined
           the value of this field is the string Unknown.
           For successful iterations, the value of this field is the
           string 'Iteration successful'.
          "
        ::= { alaSaaIpResultsEntry 6 }

       alaSaaIpResultsRunTime  OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The date and time at which the iteraton was run.
          "
        ::= { alaSaaIpResultsEntry 7 }	

      alaSaaIpResultsMinRTT   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The minimum round trip time.
          "
        ::= { alaSaaIpResultsEntry 8 }

       alaSaaIpResultsAvgRTT  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The average round trip time.
          "
        ::= { alaSaaIpResultsEntry 9 }

       alaSaaIpResultsMaxRTT   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The maximum round trip time.
          "
        ::= { alaSaaIpResultsEntry 10 }	

       alaSaaIpResultsMinJitter  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Minumum jitter value.
          "
        ::= { alaSaaIpResultsEntry 11 }

      alaSaaIpResultsAvgJitter  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Average jitter value.
          "
        ::= { alaSaaIpResultsEntry 12 }

       alaSaaIpResultsMaxJitter  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "Maximum jitter value
          "
        ::= { alaSaaIpResultsEntry 13 }	


-- ***************************************************************
--      DESCRIPTION:
--                      "Data for the stats history"
-- ***************************************************************

      alaSaaIpHistory OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 4 }

      alaSaaIpHistoryTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AlaSaaIpHistoryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "It is the table for storing the results of a ping operation. An entry
          in this table is created when a ping operation is performed. Entries 
          are removed from this table when its corresponding alaSaaCtrlEntry is
     	  deleted.
          "
        ::= { alaSaaIpHistory 1 }

      alaSaaIpHistoryEntry OBJECT-TYPE
        SYNTAX      AlaSaaIpHistoryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Entry of the alaSaaIpHistory table.
          "
      INDEX       {
                    alaSaaIpCtrlOwnerIndex,
                    alaSaaIpCtrlTestIndex,
                    alaSaaIpResultsTestRunIndex,
                    alaSaaIpHistoryIndex
                  }
      ::= { alaSaaIpHistoryTable 1 }

      AlaSaaIpHistoryEntry ::=
        SEQUENCE {
		  alaSaaIpHistoryIndex     	Unsigned32,
		  alaSaaIpHistoryPktRTT		Integer32,
		  alaSaaIpHistoryPktJitter	Integer32
                 }

      alaSaaIpHistoryIndex        OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "An entry in this table is created when the result of
           a ping iteration is determined.  The initial 2 instance
           identifier index values identify the alaSaaIpPingCtrlEntry
           that a ping iteration result (alaSaaIpHistoryEntry) belongs
           to.  The alaSaaIpHistoryIndex element selects a single ping 
           iteration result.
      
           The value of this object starts from 1 and can go up to a
           maximum of alaSaaIpCtrlNumPkts.
          "
        ::= { alaSaaIpHistoryEntry 1 }

       alaSaaIpHistoryPktRTT  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The round trip time taken by a single packet in an iteration.
          "
        ::= { alaSaaIpHistoryEntry 2 }	

       alaSaaIpHistoryPktJitter  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The jitter value for a single packet in an iteration.
          "
        ::= { alaSaaIpHistoryEntry 3 }


-- ***************************************************************
--      DESCRIPTION:
--                      "control table data for the Eth-Saa.
--                     " 
-- ***************************************************************

alaSaaEthoamCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 5 }

alaSaaEthoamCtrlTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaSaaEthoamCtrlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Defines the table for providing, via SNMP, the capability of 
         performing Ethernet Loopback and DMM test operations. The results
         of these tests are stored in the alaSaaEthoamResultsTable and
         the alaSaaEthoamHistoryTable."
   ::= { alaSaaEthoamCtrlConfig 1 }

alaSaaEthoamCtrlEntry OBJECT-TYPE
    SYNTAX      AlaSaaEthoamCtrlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the alaSaaEthoamCtrlTable.
        "
    INDEX {
             alaSaaEthoamCtrlOwnerIndex,
             alaSaaEthoamCtrlTestIndex
          }
    ::= { alaSaaEthoamCtrlTable 1 }

AlaSaaEthoamCtrlEntry ::=
    SEQUENCE {
        alaSaaEthoamCtrlOwnerIndex             SnmpAdminString,
        alaSaaEthoamCtrlTestIndex              SnmpAdminString,
        alaSaaEthoamCtrlRowStatus              RowStatus,
        alaSaaEthoamCtrlTestMode               INTEGER,
        alaSaaEthoamCtrlTgtMepId               Integer32,
        alaSaaEthoamCtrlTgtMAC                 MacAddress,
        alaSaaEthoamCtrlSrcMepId               Integer32,
        alaSaaEthoamCtrlDomainName             Dot1agCfmMaintDomainName,
        alaSaaEthoamCtrlAssociationName        Dot1agCfmMaintAssocName,
        alaSaaEthoamCtrlPktTimeOut             Integer32,
        alaSaaEthoamCtrlNumPkts                Integer32,
        alaSaaEthoamCtrlInterPktDelay          Integer32,
        alaSaaEthoamCtrlPktData                OCTET STRING,
        alaSaaEthoamCtrlVlanPriority           Integer32,
        alaSaaEthoamCtrlDropEligible           TruthValue,
        alaSaaEthoamCtrlTotalPktsRcvd          Unsigned32,
        alaSaaEthoamCtrlTotalPktsSent          Unsigned32,
        alaSaaEthoamCtrlMinRTT                 Integer32,
        alaSaaEthoamCtrlAvgRTT                 Integer32,
        alaSaaEthoamCtrlMaxRTT                 Integer32,
        alaSaaEthoamCtrlMinJitter              Integer32,
        alaSaaEthoamCtrlAvgJitter              Integer32,
        alaSaaEthoamCtrlMaxJitter              Integer32,
        alaSaaEthoamCtrlTSMinRTT               DateAndTime,
        alaSaaEthoamCtrlTSMaxRTT               DateAndTime,
        alaSaaEthoamCtrlTSMinJitter            DateAndTime,
        alaSaaEthoamCtrlTSMaxJitter            DateAndTime
    }

alaSaaEthoamCtrlOwnerIndex OBJECT-TYPE
    SYNTAX      SnmpAdminString 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
          "Owner name to identify entries in the table.
           This is currently not supported and its value
           will always be the string 'USER'.
          "
        DEFVAL { "USER" }
    ::= { alaSaaEthoamCtrlEntry 1 }
 
alaSaaEthoamCtrlTestIndex OBJECT-TYPE
    SYNTAX      SnmpAdminString 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique name to identify the entries in the table. 
         This name is unique across various SNMP users.
        "
    ::= { alaSaaEthoamCtrlEntry 2 }

alaSaaEthoamCtrlRowStatus OBJECT-TYPE
    SYNTAX      RowStatus 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object allows entries to be created and deleted
         in the alaSaaEthoamCtrlTable.  Deletion of an entry in this
         table results in all corresponding (same
         alaSaaEthoamCtrlOwnerIndex and alaSaaEthoamCtrlTestIndex index 
         values) alaSaaEthoamResultsTable and alaSaaEthoamHistoryTable 
         entries being deleted."
    ::= { alaSaaEthoamCtrlEntry 3 }

alaSaaEthoamCtrlTestMode OBJECT-TYPE
    SYNTAX      INTEGER {
                    ethernetLoopback (1),
                    ethernetDmm (2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the type of Ethernet OAM test defined by this entry.
           
         ethernetLoopback -  tests connectivity and round trip time by 
                             sending loopback requests.
         
         ethernetDmm -  tests connectivity and round trip time by sending
                        timestamped packets.
         "
    ::= { alaSaaEthoamCtrlEntry 4 }

alaSaaEthoamCtrlTgtMepId OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The Mep-Id of the destination to which the Ethernet Loopback or
        DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or
        alaSaaEthoamCtrlTgtMAC should be specified while configuring
        an alaSaaEthoamCtrlEntry.
       "
    ::= { alaSaaEthoamCtrlEntry 5 }

alaSaaEthoamCtrlTgtMAC OBJECT-TYPE
    SYNTAX      MacAddress 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The Target MAC Address of the destination to which the Ethernet
        Loopback or DMM message is to be sent: A unicast
        destination MAC address. Either alaSaaEthoamCtrlTgtMepId or
        alaSaaEthoamCtrlTgtMAC should be specified while configuring
        an alaSaaEthoamCtrlEntry.
       "
    ::= { alaSaaEthoamCtrlEntry 6 }

alaSaaEthoamCtrlSrcMepId OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The Mep-Id of the source node initiating the Ethernet Loopback or
        DMM message."
    ::= { alaSaaEthoamCtrlEntry 7 }

alaSaaEthoamCtrlDomainName OBJECT-TYPE
    SYNTAX      Dot1agCfmMaintDomainName 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The name of the domain to which the source Mep belongs.
       "
    ::= { alaSaaEthoamCtrlEntry 8 }

alaSaaEthoamCtrlAssociationName OBJECT-TYPE
    SYNTAX     Dot1agCfmMaintAssocName 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The name of the association in the domain (specified by 
        alaSaaEthoamCtrlDomainName) to which the source Mep belongs.
       "
    ::= { alaSaaEthoamCtrlEntry 9 }

alaSaaEthoamCtrlPktTimeOut OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "milli-seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The maximum time to wait for the reply of the transmitted packet.
       "
    ::= { alaSaaEthoamCtrlEntry 10 }

alaSaaEthoamCtrlNumPkts OBJECT-TYPE
    SYNTAX      Integer32 (1..10)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The number of packets to be sent in one iteration of Eth-LB/DMM test.
       "
    ::= { alaSaaEthoamCtrlEntry 11 }

alaSaaEthoamCtrlInterPktDelay OBJECT-TYPE
    SYNTAX      Integer32 (100..1000)
    UNITS       "milli-seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Specifies the delay between two consecutive packets transmitted
        during an iteration. The value specified should be a 
        multiple of 100.
       "
    ::= { alaSaaEthoamCtrlEntry 12 }

alaSaaEthoamCtrlPktData OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..255)) 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "An arbitrary amount of data to be included in the Data TLV,
        if the Data TLV is selected to be sent."
    ::= { alaSaaEthoamCtrlEntry 13 }

alaSaaEthoamCtrlVlanPriority OBJECT-TYPE
    SYNTAX      Integer32 (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Priority. 3 bit value to be used in the VLAN tag, if present
        in the transmitted frame.
       "
    ::= { alaSaaEthoamCtrlEntry 14 }

alaSaaEthoamCtrlDropEligible OBJECT-TYPE
    SYNTAX      TruthValue 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Drop Enable bit value to be used in the VLAN tag, if present
        in the transmitted frame."
    DEFVAL { false }
    ::= { alaSaaEthoamCtrlEntry 15 }

alaSaaEthoamCtrlTotalPktsRcvd   OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "Specifies the total number of packets received during all the Eth-LB/DMM
        iterations."
    ::= { alaSaaEthoamCtrlEntry 16 }

alaSaaEthoamCtrlTotalPktsSent  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
        "Specifies the total number of packets sent during all the Eth-LB/DMM 
         iterations."
    ::= { alaSaaEthoamCtrlEntry 17 }

alaSaaEthoamCtrlMinRTT  OBJECT-TYPE
    SYNTAX     Integer32 
    MAX-ACCESS read-only 
    STATUS      current
    DESCRIPTION
       "Specifies the minimum round trip time among all the iterations of the SAA.
       "
    ::= { alaSaaEthoamCtrlEntry 18 }

alaSaaEthoamCtrlAvgRTT  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "Specifies the average round trip time of all the iterations of the SAA.
       "
    ::= { alaSaaEthoamCtrlEntry 19 }

alaSaaEthoamCtrlMaxRTT  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "Specifies the maximum round trip time among all the iterations of the SAA.
       "
    ::= { alaSaaEthoamCtrlEntry 20 }

alaSaaEthoamCtrlMinJitter  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "Specifies the minimum jitter among all the iterations of the SAA.
       "
    ::= { alaSaaEthoamCtrlEntry 21 }

alaSaaEthoamCtrlAvgJitter  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "Specifies the average jitter of all the iterations of the SAA.
       "
    ::= { alaSaaEthoamCtrlEntry 22 }

alaSaaEthoamCtrlMaxJitter  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Specifies the maximum jitter among all the iterations of the SAA.
       "
    ::= { alaSaaEthoamCtrlEntry 23 }

alaSaaEthoamCtrlTSMinRTT  OBJECT-TYPE
    SYNTAX      DateAndTime 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "The timestamp of the iteration that gave the minimum 
        packet delay."
    ::= { alaSaaEthoamCtrlEntry 24 }

alaSaaEthoamCtrlTSMaxRTT  OBJECT-TYPE
    SYNTAX      DateAndTime 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "The timestamp of the iteration that gave the maximum 
        packet delay."
    ::= { alaSaaEthoamCtrlEntry 25 }

alaSaaEthoamCtrlTSMinJitter  OBJECT-TYPE
    SYNTAX      DateAndTime 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "The timestamp of the iteration that gave the minimum 
        packet jitter."
    ::= { alaSaaEthoamCtrlEntry 26 }

alaSaaEthoamCtrlTSMaxJitter  OBJECT-TYPE
    SYNTAX      DateAndTime 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "The timestamp of the iteration that gave the maximum 
        packet jitter."
    ::= { alaSaaEthoamCtrlEntry 27 }


-- ***************************************************************
--      DESCRIPTION:
--                      "Results table data for the Eth-Saa.
--                     " 
-- ***************************************************************

alaSaaEthoamResults OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 6 }

alaSaaEthoamResultsTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaSaaEthoamResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Defines the Ethoam Results Table for providing
         the capability of performing Eth-LB/DMM operations.  The 
         results of these operations are stored in the 
         alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable.

         An entry is removed from the alaSaaEthoamResultsTable when
         its corresponding alaSaaCtrlEntry is deleted."
   ::= { alaSaaEthoamResults 1 }

alaSaaEthoamResultsEntry OBJECT-TYPE
    SYNTAX      AlaSaaEthoamResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the alaSaaEthoamResultsTable.  The
         alaSaaEthoamResultsTable has the same indexing as the
         alaSaaEthoamCtrlTable in order for a alaSaaEthoamResultsEntry to
         correspond to the alaSaaEthoamCtrlEntry that caused it to
         be created.
        
         An entry in this table summarizes results from multiple
         invocations of the test configured by the corresponding
         entry in alaSaaEthoamCtrlTable."
    INDEX {
             alaSaaEthoamCtrlOwnerIndex,
             alaSaaEthoamCtrlTestIndex,
             alaSaaEthoamResultsTestRunIndex
          }
    ::= { alaSaaEthoamResultsTable 1 }

AlaSaaEthoamResultsEntry ::=
    SEQUENCE {
        alaSaaEthoamResultsTestRunIndex       Unsigned32,
        alaSaaEthoamResultsPktsSent           Unsigned32,
        alaSaaEthoamResultsPktsRcvd           Unsigned32,
        alaSaaEthoamResultsInterPktDelay      Integer32,
        alaSaaEthoamResultsRunResult          INTEGER,
        alaSaaEthoamResultsRunResultReason    OCTET STRING,
        alaSaaEthoamResultsRunTime            DateAndTime,
        alaSaaEthoamResultsMinRTT             Integer32,
        alaSaaEthoamResultsAvgRTT             Integer32,
        alaSaaEthoamResultsMaxRTT             Integer32,
        alaSaaEthoamResultsMinJitter          Integer32,
        alaSaaEthoamResultsAvgJitter          Integer32,
        alaSaaEthoamResultsMaxJitter          Integer32
    }

alaSaaEthoamResultsTestRunIndex OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The value of alaSaaEthoamResultsTestRunIndex identifies the
        row entry that reports results for a single Eth-LB/DMM test run.

        The value of this object starts from 1 and can go upto a 
        maximum of alaSaaCtrlMaxHistoryRows."
    ::= { alaSaaEthoamResultsEntry 1 }
 
alaSaaEthoamResultsPktsSent  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
        "Specifies the number of packets sent during a single Eth-LB/DMM 
         iteration."
    ::= { alaSaaEthoamResultsEntry 2 }

alaSaaEthoamResultsPktsRcvd  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "Specifies the number of packets received during a single Eth-LB/DMM
        iteration"
    ::= { alaSaaEthoamResultsEntry 3 }

alaSaaEthoamResultsInterPktDelay  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "Specifies the inter-packet-delay with which the packets were sent 
       in the iteration.
      "
    ::= { alaSaaEthoamResultsEntry 4 }

alaSaaEthoamResultsRunResult  OBJECT-TYPE
    SYNTAX      INTEGER {
                    undetermined(0),
                    success(1),
		        failed(2),
                    aborted(3)
                        }
    MAX-ACCESS read-only 
    STATUS      current
    DESCRIPTION
       "The result of the Eth-LB/DMM iteration."
    ::= { alaSaaEthoamResultsEntry 5 }

alaSaaEthoamResultsRunResultReason  OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "If the iteration fails, this field indicates the reason
        for failure. If the reason for failure cannot be determined
        the value of this field is the string Unknown.
        For successful iterations, the value of this field is the
        string 'Iteration successful'.
       "
     ::= { alaSaaEthoamResultsEntry 6 }

alaSaaEthoamResultsRunTime  OBJECT-TYPE
    SYNTAX      DateAndTime 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "The date and time at which the iteraton was run.
       "
    ::= { alaSaaEthoamResultsEntry 7 }

alaSaaEthoamResultsMinRTT  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "The minimum round trip time."
    ::= { alaSaaEthoamResultsEntry 8 }

alaSaaEthoamResultsAvgRTT  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
       "The average round trip time.
       "
    ::= { alaSaaEthoamResultsEntry 9 }

alaSaaEthoamResultsMaxRTT  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS read-only 
    STATUS      current
    DESCRIPTION
       "The maximum round trip time.
       "
    ::= { alaSaaEthoamResultsEntry 10 }

alaSaaEthoamResultsMinJitter  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS read-only 
    STATUS      current
    DESCRIPTION
       "The minimum jitter value.
       "
    ::= { alaSaaEthoamResultsEntry 11 }

alaSaaEthoamResultsAvgJitter  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS read-only 
    STATUS      current
    DESCRIPTION
       "The average jitter value.
       "
    ::= { alaSaaEthoamResultsEntry 12 }

alaSaaEthoamResultsMaxJitter  OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS read-only 
    STATUS      current
    DESCRIPTION
       "The maximum jitter value.
       "
    ::= { alaSaaEthoamResultsEntry 13 }


-- ***************************************************************
--      DESCRIPTION:
--                      "History table data for the Eth-Saa.
--                     " 
-- ***************************************************************

alaSaaEthoamHistory OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 7 }

alaSaaEthoamHistoryTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaSaaEthoamHistoryEntry
    MAX-ACCESS  not-accessible 
    STATUS      current
    DESCRIPTION 
        "Defines a table for storing the results of an Eth-LB/DMM
         iteration.  
         
         The number of entries in this table for
         a configured test are limited by the value of the 
         corresponding alaSaaEthoamCtrlMaxRows object.

         An entry in this table is created when the result of an Eth-LB/DMM 
         test is determined.  An entry is removed from this table when 
         its corresponding alaSaaEthoamCtrlEntry is deleted.

         The agent removes the oldest entry for a test in the 
         alaSaaEthoamHistoryTable to allow the addition of a new 
         entry for that test once the number of rows in the 
         alaSaaEthoamHistoryTable reaches the value specified by 
         alaSaaEthoamCtrlMaxRows."
   ::= { alaSaaEthoamHistory 1 }

alaSaaEthoamHistoryEntry OBJECT-TYPE
    SYNTAX      AlaSaaEthoamHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        ""
    INDEX {
             alaSaaEthoamCtrlOwnerIndex,
             alaSaaEthoamCtrlTestIndex,
             alaSaaEthoamResultsTestRunIndex,
             alaSaaEthoamHistoryIndex
          }
    ::= { alaSaaEthoamHistoryTable 1 }

AlaSaaEthoamHistoryEntry ::=
    SEQUENCE {
        alaSaaEthoamHistoryIndex        Unsigned32,
	alaSaaEthoamHistoryPktRTT       Integer32,
	alaSaaEthoamHistoryPktJitter	Integer32
    }

alaSaaEthoamHistoryIndex OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
          "An entry in this table is created when the result of
           an Eth-LB/DMM iteration is determined.  The initial 2 instance
           identifier index values identify the alaSaaEthoamCtrlEntry
           that an Eth-LB/DMM iteration result (alaSaaEthoamHistoryEntry) belongs
           to.  The alaSaaEthoamHistoryIndex element selects a single ping 
           iteration result.
      
           The value of this object starts from 1 and can go up to a
           maximum of alaSaaEthoamCtrlNumPkts."
    ::= { alaSaaEthoamHistoryEntry 1 }
 
alaSaaEthoamHistoryPktRTT  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
          "The round trip time taken by a single packet in an iteration.
          "
    ::= { alaSaaEthoamHistoryEntry 2 }	

alaSaaEthoamHistoryPktJitter  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
          "The jitter value for a single packet in an iteration.
          "
    ::= { alaSaaEthoamHistoryEntry 3 }


-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1SaaMIBCompliance MODULE-COMPLIANCE
   STATUS    current
   DESCRIPTION
        "Compliance statement for Saa."
   MODULE
        MANDATORY-GROUPS
        {
          alaSaaCtrlConfigGroup,
          alaSaaIpCtrlConfigGroup,
          alaSaaIpResultsGroup,
	    alaSaaIpHistoryGroup,
          alaSaaEthoamCtrlConfigGroup,
          alaSaaEthoamResultsGroup,
          alaSaaEthoamHistoryGroup
        }
   ::= { alcatelIND1SaaMIBCompliances 1 }


-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------

alaSaaCtrlConfigGroup OBJECT-GROUP
   OBJECTS
   {
    alaSaaCtrlRowStatus,
    alaSaaCtrlDescr,
    alaSaaCtrlAdminStatus,
    alaSaaCtrlTestMode,
    alaSaaCtrlRuns,
    alaSaaCtrlFailures,
    alaSaaCtrlLastRunResult,
    alaSaaCtrlLastRunTime,
    alaSaaCtrlInterval,
    alaSaaCtrlStartAt,
    alaSaaCtrlStopAt,
    alaSaaCtrlMaxHistoryRows
  }
  STATUS  current
  DESCRIPTION
  "Collection of objects for management of Saa control Group."
  ::= { alcatelIND1SaaMIBGroups 1 }

alaSaaIpCtrlConfigGroup OBJECT-GROUP
   OBJECTS
   {
    alaSaaIpCtrlRowStatus,
    alaSaaIpCtrlTestMode,
    alaSaaIpCtrlTgtAddrType,
    alaSaaIpCtrlTgtAddress,
    alaSaaIpCtrlSrcAddrType,
    alaSaaIpCtrlSrcAddress,
    alaSaaIpCtrlPayloadSize,
    alaSaaIpCtrlNumPkts,
    alaSaaIpCtrlInterPktDelay,
    alaSaaIpCtrlTypeOfService,
    alaSaaIpCtrlVRFId,
    alaSaaIpCtrlTotalPktsSent,
    alaSaaIpCtrlTotalPktsRcvd,
    alaSaaIpCtrlMinRTT,
    alaSaaIpCtrlAvgRTT,
    alaSaaIpCtrlMaxRTT,
    alaSaaIpCtrlMinJitter,
    alaSaaIpCtrlAvgJitter,
    alaSaaIpCtrlMaxJitter,
    alaSaaIpCtrlTSMinRTT,
    alaSaaIpCtrlTSMaxRTT,
    alaSaaIpCtrlTSMinJitter,
    alaSaaIpCtrlTSMaxJitter
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of Saa Ip Configuration Table."
   ::= { alcatelIND1SaaMIBGroups 2 }

alaSaaIpResultsGroup OBJECT-GROUP
   OBJECTS
   {
    alaSaaIpResultsPktsSent,
    alaSaaIpResultsPktsRcvd,
    alaSaaIpResultsInterPktDelay,
    alaSaaIpResultsRunResult,
    alaSaaIpResultsRunResultReason,
    alaSaaIpResultsRunTime,
    alaSaaIpResultsMinRTT,
    alaSaaIpResultsAvgRTT,
    alaSaaIpResultsMaxRTT,
    alaSaaIpResultsMinJitter,
    alaSaaIpResultsAvgJitter,
    alaSaaIpResultsMaxJitter
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of Saa Ip Results Table."
   ::= { alcatelIND1SaaMIBGroups 3 }

alaSaaIpHistoryGroup OBJECT-GROUP
   OBJECTS
   {
    alaSaaIpHistoryPktRTT,
    alaSaaIpHistoryPktJitter
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of Saa Ip history table."
   ::= { alcatelIND1SaaMIBGroups 4 }

alaSaaEthoamCtrlConfigGroup OBJECT-GROUP
   OBJECTS
   {
    alaSaaEthoamCtrlRowStatus,
    alaSaaEthoamCtrlTestMode,
    alaSaaEthoamCtrlTgtMepId,
    alaSaaEthoamCtrlTgtMAC,
    alaSaaEthoamCtrlSrcMepId,
    alaSaaEthoamCtrlDomainName,
    alaSaaEthoamCtrlAssociationName,
    alaSaaEthoamCtrlPktTimeOut,
    alaSaaEthoamCtrlNumPkts,
    alaSaaEthoamCtrlInterPktDelay,
    alaSaaEthoamCtrlPktData,
    alaSaaEthoamCtrlVlanPriority,
    alaSaaEthoamCtrlDropEligible,
    alaSaaEthoamCtrlTotalPktsRcvd,
    alaSaaEthoamCtrlTotalPktsSent,
    alaSaaEthoamCtrlMinRTT,
    alaSaaEthoamCtrlAvgRTT,
    alaSaaEthoamCtrlMaxRTT,
    alaSaaEthoamCtrlMinJitter,
    alaSaaEthoamCtrlAvgJitter,
    alaSaaEthoamCtrlMaxJitter,
    alaSaaEthoamCtrlTSMinRTT,
    alaSaaEthoamCtrlTSMaxRTT,
    alaSaaEthoamCtrlTSMinJitter,
    alaSaaEthoamCtrlTSMaxJitter
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of Saa Ethoam Configuration Table."
   ::= { alcatelIND1SaaMIBGroups 5 }

alaSaaEthoamResultsGroup OBJECT-GROUP
   OBJECTS
   {
    alaSaaEthoamResultsPktsSent,
    alaSaaEthoamResultsPktsRcvd,
    alaSaaEthoamResultsInterPktDelay,
    alaSaaEthoamResultsRunResult,
    alaSaaEthoamResultsRunResultReason,
    alaSaaEthoamResultsRunTime,
    alaSaaEthoamResultsMinRTT,
    alaSaaEthoamResultsAvgRTT,
    alaSaaEthoamResultsMaxRTT,
    alaSaaEthoamResultsMinJitter,
    alaSaaEthoamResultsAvgJitter,
    alaSaaEthoamResultsMaxJitter
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of Saa Ethoam Results Table."
   ::= { alcatelIND1SaaMIBGroups 6 }

alaSaaEthoamHistoryGroup OBJECT-GROUP
   OBJECTS
   {
    alaSaaEthoamHistoryPktRTT,
    alaSaaEthoamHistoryPktJitter
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of Saa Ethoam history table."
   ::= { alcatelIND1SaaMIBGroups 7 }

END