path: root/MIBS/nokia/ASAM-EQUIP-MIB

ASAM-EQUIP-MIB DEFINITIONS ::= BEGIN

-- ==========================================================================
--  This specification is published by Alcatel-Lucent under Non-Disclosure
--  Agreement(s) (NDA) with specific parties and has to be considered as
--  Confidential Information as defined in such NDA.
--  Alcatel-Lucent reserves the right to revise this document for any reason,
--  including but not limited to conformity with standards promulgated by
--  various agencies, utilisation of advances in the state of the technical
--  areas, or the reflection of changes in the design of any equipment,
--  techniques, or procedures described or referred to herein.
--  The product specifications and other technical or performance information
--  contained herein are subject to change without notice.
--  Updates of this document will be issued under the above NDA's.
--  Alcatel-Lucent makes no representation or warranty, expressed or implied,
--  with respect to the sufficiency, accuracy, or utility of any information
--  or opinion contained herein. Alcatel-Lucent expressly advises that any
--  use of for any purpose or reliance upon this technical reference is at
--  the risk of the user and that Alcatel-Lucent shall not be liable for any
--  damage or injury incurred by any person arising out of the sufficiency,
--  accuracy, or utility of any information or opinion contained herein.
--  This document is not to be construed as a suggestion to any manufacturer
--  to modify or change any of its products, nor does this document represent
--  any commitment by Alcatel-Lucent to sell or purchase any product.
--  Nothing contained herein shall be construed as conferring by implication,
--  estoppel, or otherwise any license or right under any patent, whether or
--  not the use of any information herein necessarily employs an invention of
--  any existing or later issued patent.
--  Alcatel-Lucent reserves the right not to offer any or all of these
--  products and to withdraw any or all of them at any future time.
--  Copyright (C) 2001-2009, Alcatel-Lucent. All Rights Reserved.
-- ===========================================================================
--
--  MODULE-IDENTITY
--  LAST-UPDATED "201512130000Z"
--  ORGANIZATION "Alcatel-Lucent"
--  CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.com"
--
--  REVISION "201702100000Z"
--  DESCRIPTION
--     "Editor: Bart De Vos
--      Reason for change: add support for an RFT-C power module on SX-48U (SRNT-K)
--
--  REVISION "201611070000Z"
--  DESCRIPTION
--     "Editor: Yangxiong Xia
--      Reason for change: add new shelf mode ngpon-port-reduced(9) to eqptHolderMode object for isam 7362 SF 16-GW and DF 16-GW Low capacity
--
--  REVISION "201610210000Z"
--  DESCRIPTION
--     "Editor: Lut Mertens
--      Reason for change: Replace EqptHolderIndex by EqptPowerSupplyIndex in eqptPowerSupplyId object
--
--  REVISION "201610170000Z"
--  DESCRIPTION
--    Version: 3EC36485EDAA_V5.6.0.0.0
--    Editor: Mani Batta
--    Reason for change: RCR: ALU01872170 (Reset LT restart counter)
--    Change: Introduced two MIBs- eqptBoardRestartCountPerLt and eqptBoardClearRestartCountPerLt in ASAM-EQUIP-MIB.mib.
--
--  REVISION "201608290000Z"
--  DESCRIPTION
--     "Editor: Weihai LU
--      Reason for change: add new shelf mode ngpon_supported(7) and gpon_supported(8) to eqptHolderMode object
--
--
--  REVISION "201602080000Z"
--  DESCRIPTION
--     "Editor: Eirini Tzimi
--      Reason for change: add new shelf mode ntbntioextlt-unsupported(4) to eqptHolderMode object
--
--
--  REVISION "201512220000Z"
--  DESCRIPTION
--     "Editor:  Qiong K WU
--      Reason for change: ALU02004304 (Next generation NT-FANT-G)
--      Change: add new eqptPortMappingPhyPortType: cfp(14)
--
--  REVISION "201512130000Z"
--  DESCRIPTION
--     "Editor: Laurent Carlier
--      Reason for change: add eqptPowerSupplyTable table
--
--
--  REVISION "201404150000Z"
--  DESCRIPTION
--      "Editor: Bala Amudha Pal Samy
--       Changes :
--            Added a new mode ntb-unsupported(3) to eqptHolderMode object (ALU01919868)
--
--  REVISION "201310230000Z"
--  DESCRIPTION
--     "Editor:  Qiong K WU
--      Reason for change: ALU01870122 ISR50 DPoE data path redundancy (Phase I)
--      Change: Add new reason for eqptProtElementStandbyStatuschangeReason
--              Add new reason for eqptProtGroupLastSwitchoverReason
--
--  REVISION "201309180000Z"
--  DESCRIPTION
--     "Editor:  Tom Van Peteghem
--      Reason for change: ALU01873072    NELT-B VLAN/QoS resource pooling
--      Change: Add eqptBoardPlannedResourceTable
--

--  REVISION "201304250000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.6.0.0.3
--      Editor:  Karel Meijfroidt
--      Reason for change: ALU01815260, Alarm Mechanism Improvement
--      Change: change the RANGE in the description of the eqptCustAlarmProfileSeverity.
--
--  REVISION "201304090000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.6.0.0.2
--      Editor:  Marita Saveyn
--      Reason for change: ALU01873776, eqptPortMapping attributes returns NoSuch Instance for ISAM4501, FANT-F board
--      Change: EqptPortMappingTable: changes to  eqptPortMappingLogPortType (add 4) and eqptPortMappingPhyPortSlot (desc)
--                                                eqptPortMappingPhyPortType (add 13) and eqptPortMappingPhyPortNbr (desc)
--
--  REVISION "201303260000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.6.0.0.1
--      Editor:  Vanapatla Ramana
--      Reason for change: ALU01868639, MIB readiness for 2.5G Expansion links on NRNT-A
--      Change: eqptSlotPlannedCapabilityProfile: change to description.
--
--  REVISION "201303200000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.6.0.0.0
--      Editor:  Long Zhigang
--      Changes: Add three new attributes in eqptHolderTable (RCR ALU01814646)
--               - eqptHolderSerialNumber
--               - eqptHolderVariant
--               - eqptHolderICScode
--
--  REVISION "201201008000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.5.0.0.0
--      Editor:  Dirk De la Marche
--      Changes: Change to description of CTRL functionality (NRCD-C introduction)
--
--  REVISION "201208220000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.5.0.0.0
--      Editor:  Vijayakumar Kanniah
--      Changes: eqptHolderMode: change to description (RCR ALU01807846)
--
--
--  REVISION "201208100000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.4.0.3.0
--      Editor:  Marita Saveyn
--      Changes: eqptProtGroupTable: change to description (ALU01810586)
--
--
--  REVISION "201202090000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.4.0.0.0
--      Editor:  Danny Sioncke
--      Changes: Added eqptPortProtectionTable (RCR ALU00123609)
--               Added eqptPortProtectionLookupTable (RCR ALU00123609)
--
--
--  REVISION "201104290000Z"
--  DESCRIPTION
--     "Version: 3EC36485EDAA_V4.3.0.0.1
--      Editor:  Vijayakumar Kanniah
--      Changes: Added eqptBoardOperError download-ongoing for supporting NRCD-B Automatic download (IR ALU01198543)
--
--
--  REVISION "201103040000Z"
--  DESCRIPTION
--      "Version: 3EC36485EDAA_V4.3.0.0.0
--       Editor: Lieve Dierick
--       Changes :
--            ALU01096382 :  new MIB object to store the intelligent FAN mode (IR ALU01096386)
--
--  REVISION "201008090000Z"
--  DESCRIPTION
--      "Version: 3EC36485EDAA_V4.2.0.1.4
--       Editor: Tom Van Peteghem
--       Changes :
--            ALU00492406 :  MIB description of the eqptBoardInventorySerialNumber
--           must be extended with year/week info
--
--  REVISION "201005110000Z"
--  DESCRIPTION
--      "Version: 3EC36485EDAA_V4.2.0.0.1
--       Editor: Jean Samoise
--       Changes :
--            AALU00117331 :
--           Add scalar global change counter for remote lt portmapping changes.
---
--  REVISION "201003290000Z"
--  DESCRIPTION
--      "Version: 3EC36485EDAA_V4.2.0.0.0
--       Editor: Jean Samoise
--       Changes :
--            AALU00117331 :
--            Generate trap at configuration change of the PortMapping data.
--
--
--  REVISION "201003040000Z"
--  DESCRIPTION
--      "Version: 3EC36485EDAA_V4.2.0.0.0
--       Editor: Jean SamoiseIR context drop NRNT-A
--       Changes :
--            ALU00159858 :
--            Add eth,vp, mcast to eqptPortMappingPhyPortType
---  REVISION "200910010000Z"
--  DESCRIPTION
--      "Version: 3EC36485EDAA_V4.0.0.0.0
--       Editor: Rik Verstraete
--       Changes :
--            ANTmt71411 ISAM/FTTU Merge Equipment Domain
--            Add eqptBoardIfSlotId to eqptBoardTable
--
--  REVISION "200908250000Z "
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V4.1.0.0.2
--      Editor :  Peter Van Mele
--      Reason for change:  ANTmt72355, licensing of load balancing/redundancy
--      Change: default value of the NT redundancy protection group is disabled.
--
--  REVISION "2009071300000Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V4.1.0.0.1
--       Editor: Dirk De la Marche
--       Changes :
--            eqptProtElementStandbyStatuschangeReason : new additions
--            due to NANT-D redundancy (See ANTms38234)
--            new values: (18), (19) and (20)
--
--  REVISION "20090630"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V4.1.0.0.0
--      Editor :  Sven Dhuyvetter
--      Reason for change:  ANTms80204, 'Up/Downlink faceplate nr mapping for O
--      Change: Add new PortMapping table definition.
--
--  REVISION "2009012210007Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V4.0.0.0.1
--       Editor: Viviane Verswijvel
--       Changes :
--            eqptProtElementStandbyStatuschangeReason : new desccriptions
--            to be compatible with XVPS (See FR ANTmt34321)
--
--  REVISION "200803040000Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.7.0.0.3
--       Editor: Furqan Haq
--       Changes :
--            Added a new mode ntio-unsupported(6) to eqptHolderMode object
--            Added a new mnemonics NOT_ALLOWED to eqptSlotPlannedType
--            Added new error type to eqptBoardOperError for reporting
--              BoardInsertedInIncompatibleSlot
--
--  REVISION "200803104000Z"
--  DESCRIPTION
--  "Version: 3EC36485EAAA_V3.7.0.0.0
--       Editor: Viviane Verswijvel
--       Changes:
--     Add 2 new reasons for switch over
--         Add reason for standby change state reason
--         => Hitless Redundancy R3.7
--
--  REVISION "200711080000Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.6.0.0.2
--       Editor: Danny Sioncke
--       Changes:
--         In eqptBoardTable, eqptBoardDualHostIPAddress and
--         eqptBoardDualHostLsmLocation are added.
--  REVISION "200707260000Z"
--  DESCRIPTION
--  "Version: 3EC36485EAAA_V3.6.0.0.0
--       Editor: Lu Hao
--       Changes:
--     Add a new table, eqptBoardThermalSensorTable to eqptEquipmentMIB
--
--  REVISION "200707240000Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.5.0.0.3
--      Editor: Bo Liu
--      Changes:
--         restartFromDefaultPresOAM and restartFromDefaultTotal are no longer
--         supported in eqptAsamRestart.
--
--  REVISION "200706010000Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.5.0.0.2
--      Editor: Bo Liu
--      Changes:
--          Add the new equipment practice LEWW in the description of
--          eqptHolderPlannedType.
--
--  REVISION "200705230000Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.5.0.0.1
--      Editor: Wang Jianglin
--      Changes:
--          Add the xVPS identifier to equipment table.
--
--  REVISION "200705210900Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.5.0.0.0
--      Editor: Liu Jie
--      Changes:
--         - Add the test head type for four-wire or two-wire test
--
--
--  MODULE-IDENTITY
--  LAST-UPDATED "200704241735Z"
--  ORGANIZATION "Alcatel"
--  CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.be"
--
--  DESCRIPTION
--     "The ASAM Equipment Management MIB is a vendor-specific MIB that is
--      used to manage the equipment (racks, shelves, and pluggable equipment)
--      of the ASAM subsystem in the ESAM.
--
--  REVISION "200706151600Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.4.0.0.2
--      Editor: Sven Dhuyvetter
--      Changes:
--         - restartFromDefaultPresOAM and restartFromDefaultTotal no longer
--           supported in eqptAsamRestart.
--
--  REVISION "200703291600Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.4.0.0.1
--      Editor: Danny Sioncke
--      Changes:
--         - CTRL added in descriptions where applicable.
--
--  REVISION "200702021600Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.4.0.0.0
--      Editor: He Yang
--      Changes:
--         - Add three parameter in eqptboardtable: eqptBoardLastRestartCause,
--           eqptBoardLastRestartTime, eqptBoardRestartNumberOfChanges.
--         - Add eqptRestartNumberOfChanges
--
--  REVISION "200704241735Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.3.0.2.2
--      Editor: John Chuah
--      Changes:
--         - reverted EqptTestChainEntry and eqptTestChainShelfToTapUp to
--           match the definition that was already shipped since R3.1"
--
--  REVISION "200704191800Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.3.0.2.1
--      Editor: Furqan Haq
--      Changes:
--         - reverted the index order of eqptProfileApplicabilityEntry to
--           match the definition that was already shipped since R2.5"
--
--  REVISION "200701041600Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.3.0.2.0
--      Editor: Sven Dhuyvetter
--      Changes:
--         - update DEFVALUE in ALCATEL NOTE.
--
--  REVISION "200612182245Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_V3.3.0.1.0
--      Editor: John Chuah
--      Changes:
--         - increased upper range of eqptMaxRacksPerAsam from 6 to 7 and
--           eqptMaxShelvesPerRack from 3 to 4.
--         - increased rack and shelf ranges for LEEU, LEUS and LNEU in
--           eqptHolderPlannedType.
--
--  REVISION "200609161200Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_E3.3.0.0
--      Editor: Zhu Sunbin
--      Changes:
--         - eqptProtGroupTable tablesize from 1 row to rows number depending on
--           shelf type in Alcatel Notes.
--         - eqptProtElementTable tablesize from 2 rows to rows number depending on
--           shelf type in Alcatel Notes.
--         - eqptProtElementGroupId DEFVALUE from 1 to NA
--         - eqptProtGroupId DEFVALUE from 1 to NA
--         - added notInService(2) in Alcatel Notes for eqptProtGroupRowStatus
--
--  REVISION "200606161200Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_E3.1.0.0.3
--      Editor: Lucien Marcotte
--      Changes:
--         - For HYNT, changed eqptMaxSlotsPerShelf from 21 to 22 in Alcatel Notes.
--
--  REVISION "200606011200Z"
--  DESCRIPTION
--      "Version: 3EC36485EAAA_E3.1.0.0.2
--      Editor: Bo Liu
--      Changes: ITSC
--         - Added eqptTestChainTable.
--
--  REVISION "200605231200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E3.0.0.4
--      Editor: Danny Sioncke
--      Changes: - eqptCustAlarmProfile non-REM introduced items put to
--                 "SUPPORT: NO".
--
--  REVISION "200604211200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E3.0.0.3
--      Editor: Danny Sioncke
--      Changes: - eqptCustAlarmProfile id changed from nr. 7 to nr. 8,
--                 solving conflict with eqptTestChainTable (ITSC).
--               - references to asamCustAlarm-xxx corrected to
--                 eqptCustAlarm-xxx
--
--  REVISION "200512131200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E3.0.0.2
--      Editor: Sven Dhuyvetter
--      Changes: update for 8 PVC (BDFhw31519)
--           - add eqptSlotPlannedCapabilityProfile to eqptBoardTable
--           - add eqptProfileApplicabilityTable
--           - add eqptProfileTable
--           - add eqptProfileDescriptionTable
--      Editor: Danny Sioncke
--      Changes: update for REM (BDFhw36030)
--           - add eqptCustAlarmProfileTable
--           - add eqptCustAlarmProfileMappingTable
--
--  REVISION "200511301200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E3.0.0.1
--      Editor: zhu jianhua
--      Changes: update for NEP (BDFhw62300), add eqptHolderMode
--
--  REVISION "200509161200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E2.4.0.0
--      Editor:  vairamuthu karuppiah
--      Changes: "Added eqptBoardOperError sem-power-fail,sem-ups-fail"
--
--  REVISION "200506031200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E2.3.0.1
--      Editor: Bart Geldof/Christophe De Ras
--      Changes: ODM Framework
--         - Added ODM Eqt Boardtype treated as unmanaged board.
--
--  REVISION "200504281200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E2.3.0.0
--      Editor: Lucien Marcotte
--      Changes: HYNT FGR1.0 (new product release)
--         - Added the new Eqt Board current and planned type EXT_MANAGED.
--
--  REVISION "200412061200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E2.2.0.0
--      Editor: FAN Min
--      Changes: support the eqptProt Table for ISAM R2.2 NT Redundancy Feature
--              * eqptProtGroupLastSwitchoverReason : add "LanxFailure(13)""
--
--  REVISION "200411251200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E1.0.0.0
--      Editor: Steven Luykx
--      Changes: changes in comment, version is not stepped up"
--
--  REVISION "200401291200Z"
--  DESCRIPTION
--     "Version: 3EC36485EAAA_E1.0.0.0
--      Editor: Rafael Van Driessche
--      Changes: first version for ESAM R1.0 and ESAM R1.1"
--
--  REVISION "200304241200Z"
--  DESCRIPTION
--     "Version: 3EC36485AAAA_E5.0.0.3
--      Editor: Eric De Backer
--      Changes:
--      * eqptBoardInventoryLastFailedTest: change object type to OCTET string
--        (BDFaa50395)"
--
--  REVISION "200303261200Z"
--  DESCRIPTION
--     "Version: 3EC36485AAAA_E5.0.1.0
--      Editor: Koen Van de Weyer
--      Changes:
--      * eqptBoardOperError: add "board-not-licensed" (BDFaa51682)"
--
--  REVISION "200309241200Z"
--  DESCRIPTION
--     "Version: 3EC36485AAAA_E5.0.0.2
--      Editor: Frank Devolder
--      Changes:
--      * Decrease size of eqptHolderDescription from 255 to 127 bytes
--        (BDFaa46015).
--      * Remove eqptHwChangeOccurredTrap & eqptProtChangeOccurredTrap
--        (BDFaa44804).
--      * add initialValue(255) to definition of eqptBoardRestart
--        (BDFaa45317).
--
--  REVISION "200201151200Z"
--  DESCRIPTION
--     "Version: 3EC36485AAAA_E5.0.0.1
--      Editor: Frank Devolder
--      Changes:
--      * eqptHolderAvailStatus: add state "offLine" and remove state
--        "unknown".
--      * eqptBoardSwOverruleStatus: only supported for LSMs.
--      * line-up enum values of:
--           eqptBoardOperError & eqptHolderOperError;
--           eqptBoardAvailStatus & eqptHolderAvailStatus;
--           eqptBoardRestart & eqptAsamRestart.
--      * Add object eqptBoardInventoryLastFailedTest.
--      * eqptBoardRestart: for ACU boards, only a restart without selftest is
--        supported."
--
--  REVISION "200106081200Z"
--  DESCRIPTION
--     "Version: 3EC36485AAAA_E5.0.0.0
--      Editor: Frank Devolder
--      Changes: creation of new Equipment MIB for ASAM R5.0."
--
-- =============================================================================

   IMPORTS IpAddress,  TimeTicks,
           Counter                  FROM RFC1155-SMI
           DisplayString, RowStatus,
           TruthValue               FROM SNMPv2-TC
           asam                     FROM SYSTEM-MIB
           OBJECT-TYPE              FROM RFC-1212
           InterfaceIndex           FROM ITF-MIB
           AsamAlarmSeverityType    FROM ASAM-ALARM-MIB
           AsamNextProfileIndex,
           AsamProfileRefCount,
           AsamProfilePointer,
           AsamProfileIndex,
           AsamProfileName,
           NetworkTimeInSeconds     FROM ASAM-TC-MIB;


   -- asam OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6)
   --                              internet(1) private(4) enterprises(1)
   --                              alcatel(637) asd(61) asam(1) }

   asamEquipmentMIB OBJECT IDENTIFIER ::= { asam 23 }

   -- MAX-INDEX ::= 2147483647  (= 7FFFFFFF HEX)

   -- Start type definitions ==

   EqptHolderIndex ::= INTEGER (1..255)

   EqptPowerSupplyIndex ::= INTEGER (1..255)

   EqptPowerRftcIndex ::= INTEGER (1..255)

   EqptPowerRftcLineStatus ::= INTEGER {
                                ok(0),
                                notconnected(1),
                                highimpedant(2),
                                earthfault(3)}

   EqptHolderIndexOrZero ::= INTEGER (0..255)

   EqptSlotIndex ::= INTEGER (1..65535)

   EqptCustAlarmProfileOutputType ::=       INTEGER {
                           triggered(1),    -- alarm output is triggered
                           notTriggered(2)} -- alarm output is not triggered

   EqptCustAlarmProfilePolarityType ::=       INTEGER {
                             inversed(1), -- inversed alarm polarity
                             normal(2)}   -- normal alarm polarity

   EqptPortMappingIndex ::= INTEGER

   -- End type definitions ==

   eqptAsam OBJECT IDENTIFIER ::= { asamEquipmentMIB 1 }


   -- Note on appliques:
   --
   -- The Equipment MIB is only used to manage appliques that are contained
   -- in LT shelves or combo shelves.  Appliques that are contained in separate
   -- splitter shelves cannot be managed.  Therefore, whenever this MIB
   -- mentions an "applique", it is implicitly understood that this applique
   -- is contained in the applique area of a combo shelf, or that it is the
   -- NT-I/O applique in case of an LT shelf.

   --  ==================================================================
   --  |                     START ASAM FIELDS                          |
   --  ==================================================================

   eqptAsamId OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Unique identifier of the system.
          In practice, this attribute contains the serial number of the most
          recently equipped SMAS board within the main shelf.

          Notice however that there are also shelves in which the SMAS is replaced
          by a GFC board (e.g ARAM-B) or even shelves without SMAS/GFC in which
          the serial number of the ACU is taken.

          This attribute is used internally by the system in case both NTs
          start-up simultaneously to determine whether either the database on
          NT-A or the database on NT-B should be used as the systems database.
          It's not the intention to make this attribute visible to an operator.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: ''   UNITS: -"
      ::= { eqptAsam 1 }

   eqptAsamRestart OBJECT-TYPE
      SYNTAX INTEGER {
         restartWithSelfTest (1),
            -- restart with selftest
         restartWithoutSelfTest (2),
            -- restart without selftest
         -- restartFromDefaultPresOAM (3),
            -- restart with removal of persistent data, but preserving the
            -- management channel configuration data
         -- restartFromDefaultTotal (4),
            -- restart with removal of all persistent data, including the
            -- management channel configuration data
         restartHot (5),
            -- system hot restart
         initialValue (255)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This attribute is used to restart the system. The persistent data is preserved.
          Contains previous restart reason, if not available it contains value 255.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES                  RANGE: See above
             PERSIST: YES   DEFVALUE: initialValue (255)   UNITS: -"
      ::= { eqptAsam 2 }

   eqptMaxRacksPerAsam OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This object is initialized by the system and specifies the maximum
          number of racks supported by the system.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..7
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptAsam 3 }

   eqptMaxShelvesPerRack OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This object is initialized by the system and specifies the maximum
          number of shelves which can be equipped within one rack.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..4
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptAsam 4 }

   eqptMaxSlotsPerShelf OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This object is initialized by the system and specifies the maximum
          number of regular slots supported by one shelf.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..22
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptAsam 5 }

   eqptHwNumberOfChanges OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter which indicates the number of configuration or
          status changes in the Equipment MIB objects.  This counter is
          incremented each time any of the summary table objects change.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: 0    UNITS: -"
      ::= { eqptAsam 6 }

   eqptProtNumberOfChanges OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter which indicates the overall number of status
          changes in the equipment protection MIB objects.  This counter is
          incremented each time any of the eqptProtGroupNumberOfChanges
          counters is incremented.

          ALCATEL NOTE:
             SUPPORT:YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: 0    UNITS: -"
      ::= { eqptAsam 7 }

eqptRestartNumberOfChanges OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter which indicates the overall number of status
          changes in the eqptBoardRestartNumberOfChanges objects in
          eqptBoardTable. This counter is incremented each time any of the
          eqptBoardRestartNumberOfChanges counters is incremented.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: 0    UNITS: -"
      ::= { eqptAsam 8 }

eqptFanMode OBJECT-TYPE
     SYNTAX     INTEGER
                {
                  default (0),
                  eco (1),
                  protect (2),
                  classic (3)
                }
     ACCESS     read-write
     STATUS     mandatory
     DESCRIPTION
         "
            Parameter indicates the actually applied FAN tray mode:

           'default': the fan packs run in average mode, predefined thermal margins are
                      used for defining/adapting the fan speeds

           'eco': the fan packs run in 'green' mode, t.i. the most economical mode, minimal
                  thermal margins wrt default settings

           'protect': the fan packs run in a heavy mode, t.i. wider thermal margins wrt
                      default settings

           'classic': fixed speed settings apply wrt the fan - no SW control

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 0    UNITS: -"
      ::= { eqptAsam 9 }

   --  ==================================================================
   --  |                     STOP ASAM FIELDS                           |
   --  ==================================================================

   --  ==================================================================
   --  |                     START HOLDER TABLE                         |
   --  ==================================================================

   eqptHolderTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptHolderEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Equipment holder table, representing the system, the racks and
          the shelves.

          This table contains one row for the system, one row per rack,
          and one row per shelf.

          ALCATEL NOTE:
             SUPPORT: YES  TABLESIZE: DEP as described above"
      ::= { asamEquipmentMIB 2 }

   eqptHolderEntry OBJECT-TYPE
      SYNTAX EqptHolderEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the equipment holder table.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptHolderId }
      ::= { eqptHolderTable 1 }

   EqptHolderEntry ::= SEQUENCE {
      eqptHolderId                 EqptHolderIndex,
      eqptHolderClass              INTEGER,
      eqptHolderPlannedType        DisplayString,
      eqptHolderActualType         DisplayString,
      eqptHolderAdminStatus        INTEGER,
      eqptHolderOperStatus         INTEGER,
      eqptHolderOperError          INTEGER,
      eqptHolderAvailStatus        INTEGER,
      eqptHolderDescription        DisplayString,
      eqptHolderContainerId        INTEGER,
      eqptHolderContainerOffset    INTEGER,
      eqptHolderMode               INTEGER,
      eqptHolderSerialNumber       DisplayString,
      eqptHolderVariant       DisplayString,
      eqptHolderICScode       DisplayString
   }

   eqptHolderId OBJECT-TYPE
      SYNTAX EqptHolderIndex
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Index in equipment holder Table.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 1 }

   eqptHolderClass OBJECT-TYPE
      SYNTAX INTEGER {
          mainIqHcl (1),    -- main shelf supporting both IQ-based and
                            -- HCL-based traffic
          extIq (2),        -- extension shelf supporting only IQ-based traffic
          extHcl (3),       -- extension shelf supporting only HCL-based traffic
          mainEthernet (4), -- main shelf supporting Ethernet-based traffic
          extEthernet (5)   -- extension shelf supporting Ethernet-based traffic
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Classification of shelves. This object has no meaning for the
          system and the rack equipment holders.

          Note: for ISAM, only the values mainEthernet (4) and extEthernet (5)
                are allowed.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NO   RANGE: 1..5
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 2 }

   eqptHolderPlannedType OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "A string representing the planned type of equipment holder.
          If the equipment holder is planned, the string consists of a
          mnemonic, identifying the holder type.
          This object is only writable for the entries that represent a shelf.
          Other entries get a value corresponding to the detected equipment
          practice type.

          Following values are valid:

          System-types:
          =============
          LAUS          Large ASAM US market (6 racks, 3 shelves per rack)
          LAEU          Large ASAM EU market (6 racks, 3 shelves per rack)
          LEEU          Large ESAM EU market (7 racks, 4 shelves per rack)
          LEUS          Large ESAM US market (7 racks, 4 shelves per rack)
          LNEU          Large New EquipmentPractise EU market(7 racks, 4 shelves
                        per rack)
          LEWW          Large ESAM World Wide (7 racks, 4 shelves per rack)
          LNWW    Large ESAM World Wide (7 racks, 4 shelves per rack)

          Rack-types:
          ===========
          ALTR-A        ADSL Line Termination Rack version A (US)
          ALTR-E        ADSL Line Termination Rack version E (ETSI 2200mm)

          Shelf-types:
          ============
          <SHELF_MNEMONIC>  A shelf of a specific type.  Refer to the ETSI
                            Configurations and US Configurations documents
                            for the list of shelf types that are supported
                            in a given system release.

          NOT_PLANNED       The shelf is not planned.

          NOT_ALLOWED       Shelf planning is not allowed in this position.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NO              RANGE: See above
             PERSIST: YES   DEFVALUE: 'NOT_PLANNED'   UNITS: -"
      ::= { eqptHolderEntry 3 }

   eqptHolderActualType OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "A string representing the actual equipment holder type.

          Following values are possible:

          <HOLDER_MNEMONIC> Indicates the detected equipment holder-type.
                            Uses same mnemonics as described in object
                            eqptHolderPlannedType.

          EMPTY             Equipment holder is not detected

          UNKNOWN           The type of the detected holder is unknown.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 4 }

   eqptHolderAdminStatus OBJECT-TYPE
      SYNTAX INTEGER {
         unlock(1),
         lock(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Used by the administrator to lock or unlock an equipment holder.
          This attribute is only supported for shelves.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: See above
             PERSIST: YES   DEFVALUE: 1     UNITS: -"
      ::= { eqptHolderEntry 5 }

   eqptHolderOperStatus OBJECT-TYPE
      SYNTAX INTEGER {
         enabled(1),
         disabled(2)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute identifies whether or not the equipment holder is
          capable of performing its normal functions.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..2
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 6 }

   eqptHolderOperError OBJECT-TYPE
      SYNTAX INTEGER {
         no-error(1),                   -- no-error or admin state = Down
         type-mismatch(2),
         holder-missing(3),
         holder-installation-missing(4),
         defense(15)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute describes for what reason the equipment holder is
          not operational. These values correspond with the alarms that are
          generated in case of a failure.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..4, 15
             PERSIST: NO    DEFVALUE: 1    UNITS: -"
      ::= { eqptHolderEntry 7 }

   eqptHolderAvailStatus OBJECT-TYPE
      SYNTAX INTEGER {
          available(1),     -- equipment holder is available
          failed (3),       -- equipment holder is detected but faulty
          notInstalled (5), -- equipment holder is not installed
          offLine (6)       -- equipment holder has been disabled
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute indicates whether the equipment holder is
          available or not.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1, 3, 5, 6
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 8 }

   eqptHolderDescription OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..127))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Text-field, which can for instance be used to describe the
          location of the equipment holder.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: See above
             PERSIST: YES   DEFVALUE: ''    UNITS: -"
      ::= { eqptHolderEntry 9 }

   eqptHolderContainerId OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute describes in which equipment holder the equipment
          holder is contained.
          This object is only meaningful for racks and shelves, since the
          system itself has no containing equipment holder.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 10 }

   eqptHolderContainerOffset OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute describes the position of the equipment holder
          in the containing equipment holder.
          This object is only meaningful for racks and shelves, since the
          system itself has no containing equipment holder.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 11 }

   eqptHolderMode OBJECT-TYPE
      SYNTAX INTEGER{
          ntbntio-supported(1),
          ntbntio-unsupported(2),
          ntb-unsupported(3),
          ntbntioextlt-unsupported(4),
          ntio-unsupported(6),
          ngpon-supported(7),
          gpon-supported(8),
          ngpon-port-reduced(9)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION  "This attribute identifies the holder mode and is used by
          both the NEP shelf and the ARAM-E shelf:
          ntbntio-supported: this mode works in the same manner as iSAM XD. The
          LSM can only be used on LSM slot. NT in NTB is supported. NTIO is
          also supported.
          ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as
          LT slot. So, two more LSM can be supported in this mode. Therefore,
          NTIO/NTB board is not supported.
          ntb-unsupported: In this mode, NTB slot can be used as LT slot.
          So one more LT can be supported in this mode. Therefore, NTB board will
          not be supported. This mode is applicable for NFXS-B shelf only.
          ntio-unsupported: In this mode, there is no NTIO; the slot can be
          used for an LSM.
        DEFAULTVALUE:  The default Value of the eqptHolderMode depends
          on the shelf type. In the case of ARAM-E, default will be ntio-unsupported.
          All other shelves will default to ntbntio-supported mode.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA          RANGE: See above
             PERSIST: Yes   DEFVALUE: See above   UNITS: -"
      ::= { eqptHolderEntry 12 }


   eqptHolderSerialNumber OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the serial number of the shelf.

         NOT available    If FIM < 25 in RI, this attribute could not be retrieved.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 13 }


   eqptHolderVariant OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the ALU code of the shelf.

          NOT available    If FIM < 25 in RI, this attribute could not be retrieved.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 14 }

   eqptHolderICScode OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the Item Change Status iteration
          code of the shelf.

          NOT available    If FIM < 25 in RI, this attribute could not be retrieved.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptHolderEntry 15 }

   --  ==================================================================
   --  |                     STOP HOLDER TABLE                          |
   --  ==================================================================
   --  ==================================================================
   --  |                     START BOARD TABLE                          |
   --  ==================================================================

   eqptBoardTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptBoardEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A table representing the slots of all planned shelves. Each slot
          can hold a board of one of the following types: NT, EXT, LSM,
          ACU, CTRL, applique.

          This table has a row for each slot in each planned shelf.

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE: DEP as described above"
      ::=  { asamEquipmentMIB 3 }

   eqptBoardEntry OBJECT-TYPE
      SYNTAX EqptBoardEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry in the eqptBoardTable.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptSlotId }
      ::=  { eqptBoardTable 1 }

   EqptBoardEntry ::= SEQUENCE {
      eqptSlotId                         EqptSlotIndex,
      eqptSlotPlannedType                DisplayString,
      eqptSlotActualType                 DisplayString,
      eqptSlotPowerStatus                INTEGER,
      eqptBoardAdminStatus               INTEGER,
      eqptBoardOperStatus                INTEGER,
      eqptBoardOperError                 INTEGER,
      eqptBoardAvailStatus               INTEGER,
      eqptBoardRestart                   INTEGER,
      eqptBoardSwOverruleStatus          INTEGER,
      eqptBoardContainerId               INTEGER,
      eqptBoardContainerOffset           INTEGER,
      eqptBoardInventoryAlcatelCompanyId DisplayString,
      eqptBoardInventoryTypeName         DisplayString,
      eqptBoardInventoryPBACode          DisplayString,
      eqptBoardInventoryFPBACode         DisplayString,
      eqptBoardInventoryICScode          DisplayString,
      eqptBoardInventoryCLEICode         DisplayString,
      eqptBoardInventorySerialNumber     DisplayString,
      eqptBoardInventoryLastFailedTest   OCTET STRING (SIZE(4)),
      eqptSlotPlannedCapabilityProfile   AsamProfilePointer,
      eqptBoardCustAlarmProfile          AsamProfilePointer,
      eqptBoardLastRestartCause          INTEGER,
      eqptBoardLastRestartTime           NetworkTimeInSeconds,
      eqptBoardRestartNumberOfChanges    Counter,
      eqptBoardRelatedMgntEntityIPAddress   IpAddress,
      eqptBoardRelatedMgntEntityPairedNumber   INTEGER,
      eqptBoardDualHostIPAddress         IpAddress,
      eqptBoardDualHostLsmLocation       EqptHolderIndexOrZero,
      eqptBoardIfSlotId                  INTEGER,
      eqptBoardRestartCountPerLt         Counter,
      eqptBoardClearRestartCountPerLt    TruthValue
   }

   eqptSlotId OBJECT-TYPE
      SYNTAX EqptSlotIndex
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A unique value to identify a slot position.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 1 }

   eqptSlotPlannedType OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
          is planned in the slot.  If the board is planned, the string consists
          of a mnemonic that identifies the board-type.

          Following mnemonics are valid:

          <BOARD_MNEMONIC> A board of a specific type.  Refer to the ETSI and
                           US Configurations documents for the list of boards
                           that are supported in a given release.
                           ODM board types are planned with the board mnemonic,
                           they are treated as unmanaged boards.

          EXT_MANAGED      The presence of the LT module can be detected but
                           it is not managed by this NT in the HYNT module.
                           The LT type must be planned on the other NT.

          UNMANAGED        Unmanaged board: this means that the presence of
                           the board can be detected and that the board can
                           be reset and powered-down but that it is not
                           possible to establish communication with the board
                           in software.

          NOT_PLANNED      No board is planned in the slot.

          NOT_ALLOWED      Slot planning is not allowed in this position.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES             RANGE: See above
             PERSIST: YES   DEFVALUE: 'NOT_PLANNED'   UNITS: -"
      ::= { eqptBoardEntry 2 }

   eqptSlotActualType OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
          is actually present in the slot.

          Following values are possible:

          <BOARD_MNEMONIC>  Indicates the detected board-type.  Uses same
                            mnemonics as described in object
                            eqptSlotPlannedType.

          EMPTY             No board plugged within this slot.

          EXT_MANAGED      The presence of the LT module can be detected but
                           it is not managed by this NT in the HYNT module.
                           The LT type must be planned on the other NT.

          UNMANAGED         The type of the detected board is unknown
                            and the planned board type is UNMANAGED or ODMboardtype.

          UNKNOWN           The type of the detected board is unknown
                            and the planned board type is not UNMANAGED
                            and the planned board type is not EXT_MANAGED.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 3 }

   eqptSlotPowerStatus OBJECT-TYPE
      SYNTAX INTEGER {
         powerUp(1),
         powerDown(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This attribute is used by the operator to power-up or power-down
          an LSM slot. This attribute is not supported for other type of slots.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: 1..2
             PERSIST: YES   DEFVALUE: 1     UNITS: -"
      ::= { eqptBoardEntry 4 }

   eqptBoardAdminStatus OBJECT-TYPE
      SYNTAX INTEGER {
         unlock(1),
         lock(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This attribute is used by the operator to lock or unlock the board.

          This attribute is only supported for the following type of boards:
          NT (but notice that the system will refuse a request to lock the NT
          of a simplex system), EXT and LSM (if managed).  This attribute has
          no meaning for an unmanaged or externally managed (EXT_MANAGED) LSM,
          for an ACU, CTRL or for an applique. An exception is the NRCD-C, CTRL
          board of the FD-REM, that has LT capabilities next to the regular
          CTRL capabilities.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: 1..2
             PERSIST: YES   DEFVALUE: 1     UNITS: -"
      ::= { eqptBoardEntry 5 }

   eqptBoardOperStatus OBJECT-TYPE
      SYNTAX INTEGER {
         enabled(1),
         disabled(2)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute informs the operator whether the plug-in unit is able
          to perform its normal operation.

          This attribute is supported for all type of boards: NT, EXT, LSM,
          ACU, CTRL, applique.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..2
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 6 }

   eqptBoardOperError OBJECT-TYPE
      SYNTAX INTEGER {
         no-error(1),                   -- no-error or admin state = Down
         type-mismatch(2),
         board-missing(3),
         board-installation-missing(4),
         no-planned-board(5),
         waiting-for-sw(6),
         init-boot-failed(7),
         init-download-failed(8),
         init-connection-failed(9),
         init-configuration-failed(10),
         board-reset-protection(11),
         invalid-parameter(12),
         temperature-alarm(13),
         tempshutdown(14),
         defense(15),
         board-not-licensed(16),
         sem-power-fail(17),
         sem-ups-fail(18),
         board-in-incompatible-slot(19),
         download-ongoing(21),
         unknown-error(255)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute describes for what reason the board is not operational.
          These values correspond with the alarms which are generated in case of
          a failure.

          This attribute is supported for all type of boards: NT, EXT, LSM,
          ACU, CTRL, applique.
          Default value is no-error, replaced by result from startup sequence.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..15, 255
             PERSIST: NO    DEFVALUE: 1    UNITS: -"
      ::= { eqptBoardEntry 7 }

   eqptBoardAvailStatus OBJECT-TYPE
      SYNTAX INTEGER {
         available(1),    -- board is available, after successfull selftest
         inTest(2),       -- during selftest or init, after reset or power up
         failed(3),       -- error, error in selftest or timeout
         powerOff(4),     -- board is powered off
         notInstalled(5), -- board is not plugged in
         offLine(6),      -- board has been disabled
         dependency(7)    -- board cannot operate because some other resource
                          -- on which it depends is unavailable
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute provides further information regarding the state
          of the board. It is set to available after a successfull selftest
          of the board (if applicable).

          This attribute is supported for all type of boards: NT, EXT, LSM,
          ACU, CTRL, applique.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..7
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 8 }

   eqptBoardRestart OBJECT-TYPE
      SYNTAX INTEGER {
         with-selftest(1),
         without-selftest(2),
         hot-restart(5),
         initialValue (255)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Writing a valid value to this object will restart the board in the
          specified mode.

          This attribute is only supported for the following type of boards:
          NT, EXT, managed LSM, ACU, CTRL.  For ACU and CTRL boards, only a
          restart without selftest is supported. An exception is the NRCD-C,
          FD-REM CTRL board, that has LT capabilities (restart with/without
          selftest) next to the regular CTRL capabilities.
          Contains previous restart reason, if not available it has value 255.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: 1, 2, 5, 255
             PERSIST: YES   DEFVALUE: NA    UNITS: -"
      ::= { eqptBoardEntry 9 }

   eqptBoardSwOverruleStatus OBJECT-TYPE
      SYNTAX INTEGER {
         no-overrule(1),
         overrule(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Used to overrule the default software version for this board.
          This attribute is only supported for managed LSMs.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: 1..2
             PERSIST: NO    DEFVALUE: 1     UNITS: -"
      ::= { eqptBoardEntry 10 }

   eqptBoardContainerId OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute describes in which equipment holder the slot
          is contained.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 11 }

   eqptBoardContainerOffset OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute describes the position of the slot in the
          containing equipment holder.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 12 }

   -- The following attributes are used to represent the board inventory data.
   -- Board inventory data is retrieved for the following board-types: NT, EXT,
   -- managed LSM, ACU, CTRL, applique.
   -- Board inventory data is not retrieved for unmanaged ,externally managed
   -- (EXT_MANAGED) LSMs and ODM boardtypes.

   eqptBoardInventoryAlcatelCompanyId OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the company of the board.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 13 }

   eqptBoardInventoryTypeName OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the name of the board.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 14 }

   eqptBoardInventoryPBACode OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the Alcatel Printed Board Assembly
          code of of the board.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 15 }

   eqptBoardInventoryFPBACode OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the Alcatel Printed Board Assembly
          code of the board, which also identifies the boot software.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 16 }

   eqptBoardInventoryICScode OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the Item Change Status iteration
          code of the board.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 17 }

   eqptBoardInventoryCLEICode OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the (USA) Common Language Equipment
          Identification code of the board.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 18 }

   eqptBoardInventorySerialNumber OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute represents the serial number of the board.

          Breakdown of a sample serial number is :

          sample NANT-D serial number is AA1003ZA028

             AA  10    03     ZA028
                 ---  ====  ==========
                  |     |        |=====' Production Plant Code
                  |     |
                  |     |==============' Week
                  |
                  |====================' Year

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 19 }

   eqptBoardInventoryLastFailedTest OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(4))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Identifies the last failing test by means of 4 numbers, from MSB
          to LSB:
             - Table number (1 byte)
             - Segment number (1 byte)
             - Case number (1 byte)
             - Check number (1 byte)
          As long as there has been no failing selftest, the value of this
          object will be 0.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptBoardEntry 20 }

   eqptSlotPlannedCapabilityProfile OBJECT-TYPE
      SYNTAX AsamProfilePointer
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "A pointer to the capability profile that will be used for this
          slot. Capability profiles are only applicable for LT cards
          that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTIO cards.
          Planning the profile should always be done at the same moment the
          LT/NTIO is planned.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: See above
             PERSIST: YES   DEFVALUE: 0     UNITS: -"
      ::= { eqptBoardEntry 22 }

   eqptBoardCustAlarmProfile OBJECT-TYPE
      SYNTAX AsamProfilePointer
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "A pointer to the customizable alarms profile which will be
    associated to NT for all shelves except FD-REM where the
    customizable alarms profile will be associated to master LT.
    In redundant NT shelves the profile will be associated to
    both NTA and NTB while associating customizable alarms profile
    to NTA or NTB.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: See above
             PERSIST: YES   DEFVALUE: 0     UNITS: -"
      ::= { eqptBoardEntry 23 }

   eqptBoardLastRestartCause OBJECT-TYPE
      SYNTAX INTEGER {
         poweron(1),
         unknown(2),
         watchdog(3),
         coldreset(4),
         warmreset(5),
         hotreset(6),
         hotreload(7),
         cleandata(8),
         emergencybuild(9),
         poweronreset(10),
         commitfailure(11),
         timezonemodified(12)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute gives the last restart cause for board.
          Currently only LSM board can support. Considering future safe,
          only use default value for other board entry.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA        RANGE: See above
             PERSIST: NO    DEFVALUE: unknown   UNITS: -"
      ::= { eqptBoardEntry 24 }

   eqptBoardLastRestartTime OBJECT-TYPE
      SYNTAX NetworkTimeInSeconds
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute gives the last restart time.
          Currently only LSM board can support. Considering future safe,
          only use default value for other board entry.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA    RANGE: See above
             PERSIST: NO    DEFVALUE: 0     UNITS: -"
      ::= { eqptBoardEntry 25 }

   eqptBoardRestartNumberOfChanges OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter which indicates the number of restart times.
          This counter is incremented each time eqptBoardLastRestartTime
          changes. Considering future safe, only use default value for
          other board entry.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA    RANGE: See above
             PERSIST: NO    DEFVALUE: 0     UNITS: -"
      ::= { eqptBoardEntry 26 }

   eqptBoardRelatedMgntEntityIPAddress OBJECT-TYPE
      SYNTAX IpAddress
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Network address. It is a public OAM IP address related to xVPS. For
    single OAM IP is introduced, multi-xVPS boards existing on a same shelf
          may use one single OAM IP. This IP is configured on NT which manages
          these xVPS boards.

          ALCATEL NOTE:
          SUPPORT: YES      INSRVMOD: NA    RANGE:
          PERSIST: NO       DEFVALUE: 0     UNITS: -"
      ::= { eqptBoardEntry 27 }


   eqptBoardRelatedMgntEntityPairedNumber OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         " For single OAM IP is introduced, one public OAM IP can not identify an
           xVPS, so community string is introduced. Each active xVPS will have
           different community string in one shelf.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE:
             PERSIST: NO   DEFVALUE: 0   UNITS: -"
      ::= { eqptBoardEntry 28 }

   eqptBoardDualHostIPAddress OBJECT-TYPE
      SYNTAX IpAddress
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Network address. Only applicable for FD REM connected to dual host.
    It is the public OAM IP address of the host connecting the Lsm in this
    externally managed slot. It is instantiated with default value and
    can only be set when the planned type is EXT_MANAGED.

          ALCATEL NOTE:
          SUPPORT: YES      INSRVMOD: YES   RANGE:
          PERSIST: YES      DEFVALUE: 0     UNITS: -"
      ::= { eqptBoardEntry 29 }


   eqptBoardDualHostLsmLocation OBJECT-TYPE
      SYNTAX EqptHolderIndexOrZero
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         " Only applicable for FD REM connected to dual host.
     It is the Rack/Shelf identifying the location of this
     externally managed slot, within the scope of the host connecting
     the Lsm.  The slot component is implicitly present in the key.
     It is instantiated with default value and can only be set when
     the planned type is EXT_MANAGED.  The type corresponds to the
     type EqptHolderIndex, except for the fact that this field can
     be 0, which is the default value.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: YES  RANGE: See above
             PERSIST: YES  DEFVALUE: 0    UNITS: -"
      ::= { eqptBoardEntry 30 }

   eqptBoardIfSlotId OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         " This object gives the slot's linear number, which could be
     used by an external manager to help in mapping a given
     IfIndex to a physical slot location. It is a numerical value
     that consists of 6 bits. For a slot that does not carry any
     interfaces (e.g. applique or NTIO slot), the value is always
     '0xFF'.
           Note that this linear slot number is persistent across system
     restarts, i.e. the same linear slot number will be used for
     the same slot even after a restart of the ISAM system.
     However, it is not guaranteed that the same linear slot
     number will used after a migration to a new release.

      ALCATEL NOTE:
         SUPPORT: YES  INSRVMOD: YES  RANGE: See above
         PERSIST: YES  DEFVALUE: 0xFF UNITS: -"
      ::= { eqptBoardEntry 32 }

      eqptBoardRestartCountPerLt OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter which indicates the number of restart times per LT.
          This counter is incremented each time eqptBoardLastRestartTime
          changes.This counter will reset to zero when LT replaced or unplanned.

         Note:This counter is Per LT basis. LTs are distinguished based on serialNumber.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA    RANGE: See above
             PERSIST: NO    DEFVALUE: 0     UNITS: NA"
      ::= { eqptBoardEntry 33 }

      eqptBoardClearRestartCountPerLt OBJECT-TYPE
      SYNTAX TruthValue
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This object is a button-like object to reset the eqptBoardRestartCountPerLt counter.
          When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is cleared.

          A value set to false(2) or other is ignored..

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA      RANGE: See above
             PERSIST: NO    DEFVALUE: FALSE   UNITS: NA"
      ::= { eqptBoardEntry 34 }


   --  ==================================================================
   --  |                     STOP BOARD TABLE                           |
   --  ==================================================================

   --  ==================================================================
   --  |                     START SHELF SUMMARY TABLE                  |
   --  ==================================================================

   eqptShelfSummaryTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptShelfSummaryEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Shelf summary table, summarizing slot or board related status
          changes within each shelf.

          This table has one row per planned shelf.

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE: DEP as described above."
      ::= { asamEquipmentMIB 4 }

   eqptShelfSummaryEntry OBJECT-TYPE
      SYNTAX EqptShelfSummaryEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the shelf summary table.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptHolderId }
      ::= { eqptShelfSummaryTable 1 }

   EqptShelfSummaryEntry ::= SEQUENCE {
      eqptShelfHwNumberOfChanges         Counter,
      eqptShelfSlotSummaryOccupation     OCTET STRING,
      eqptShelfBoardSummaryAdmin         OCTET STRING,
      eqptShelfBoardSummaryAvail         OCTET STRING,
      eqptShelfBoardSummaryOper          OCTET STRING,
      eqptShelfBoardSummaryTypeMismatch  OCTET STRING,
      eqptShelfBoardSummaryAlarm         OCTET STRING
   }

   eqptShelfHwNumberOfChanges OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter which indicates the number of configuration or
          status changes for slots/boards within this shelf. This counter
          is incremented each time any of the summary table objects of this
          shelf changes.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptShelfSummaryEntry 1 }

   eqptShelfSlotSummaryOccupation OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Bitmap of the occupation of slots (0 = empty, 1 = full)
          Applicable for NT, EXT, LSM, ACU, CTRL, applique.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptShelfSummaryEntry 2 }

   eqptShelfBoardSummaryAdmin OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Bitmap of the administrative state of the boards
          (0 = locked, 1 = unlocked).  Applicable for NT, EXT, LSM.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptShelfSummaryEntry 3 }

   eqptShelfBoardSummaryAvail OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Bitmap of the availability state of the boards (0 = not available,
          1 = available).  Applicable for NT, EXT, LSM, ACU, CTRL, applique.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptShelfSummaryEntry 4 }

   eqptShelfBoardSummaryOper OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Bitmap of the operational state of the boards (0 = locked,
          1 = unlocked).  Applicable for NT, EXT, LSM, ACU, CTRL, applique.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptShelfSummaryEntry 5 }

   eqptShelfBoardSummaryTypeMismatch OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Bitmap of the mismatch between the actual board-type and the planned
          board-type (0 = mismatch, 1 = no mismatch).
          Applicable for NT, EXT, LSM, ACU, CTRL, applique.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptShelfSummaryEntry 6 }

   eqptShelfBoardSummaryAlarm OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Bitmap of the boards which generated an alarm (0 = alarm,
          1 = no alarm).  Applicable for NT, EXT, LSM, ACU, CTRL, applique.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA   RANGE: See above
             PERSIST: NO   DEFVALUE: NA   UNITS: -"
      ::= { eqptShelfSummaryEntry 7 }

   --  ==================================================================
   --  |                     STOP SHELF SUMMARY TABLE                   |
   --  ==================================================================

   eqptProt OBJECT IDENTIFIER ::= { asamEquipmentMIB 5 }

   eqptProtNextProtGroupId OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This object contains an appropriate value to be used for
          eqptProtGroupId when creating entries in the eqptProtGroupTable.
          The value 0 indicates that no unassigned entries are available.
          After each retrieval, the agent will modify the value to the
          next unassigned index.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: See above
             PERSIST: NO    DEFVALUE: NA    UNITS: -"
      ::= {eqptProt 1}

   --  ==================================================================
   --  |                     START PROTECTIONGROUP TABLE                |
   --  ==================================================================

   eqptProtGroupTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptProtGroupEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A table representing groups of protected or protecting elements.
          Only one row for NT protection group which will always be created and
          cannot be deleted.
          From ISAM R4.1.02 the default created NT protection group will be locked.
          (before it was unlocked).
          From R3.3 onwards, each LT protection group (comprised of 2 adjacent
          slots LT n and LT n+1, where n is a odd number), also has a row.
          The protection groups are created by default even though
          the protection groups are not used.

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE:  DEP as described above "
      ::= { eqptProt 2 }

   eqptProtGroupEntry OBJECT-TYPE
      SYNTAX EqptProtGroupEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the eqptProtGroupTable.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptProtGroupId }
      ::= { eqptProtGroupTable 1 }

   EqptProtGroupEntry ::= SEQUENCE {
      eqptProtGroupId                     INTEGER,
      eqptProtGroupType                   INTEGER,
      eqptProtGroupNumberOfChanges        Counter,
      eqptProtGroupSwitchoverCount        Counter,
      eqptProtGroupLastSwitchoverReason   INTEGER,
      eqptProtGroupEpsQuenchfactor        TimeTicks,
      eqptProtGroupAlarmBitmap            INTEGER,
      eqptProtGroupAdminStatus            INTEGER,
      eqptProtGroupAdminProtElement       INTEGER,
      eqptProtGroupOperProtElement        INTEGER,
      eqptProtGroupRowStatus              RowStatus
   }

   eqptProtGroupId OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A unique value to identify a protection group.
          The value 1 is reserved for the NT protection group,
          which is always present and cannot be deleted.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptProtGroupEntry 1}

   eqptProtGroupType OBJECT-TYPE
      SYNTAX INTEGER {
         one-plus-one(1),
         one-for-N(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This attributes distinguishes between 1+1 and 1:N protection groups.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA                RANGE: 1..2
             PERSIST: YES   DEFVALUE: one-plus-one(1)   UNITS: -"
      ::= { eqptProtGroupEntry 2 }

   eqptProtGroupNumberOfChanges OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter which indicates the number of status changes
          in this protection group as well as the status changes for the
          protecting elements within this group:
              eqptProtGroupSwitchoverCount;
              eqptProtGroupLastSwitchoverReason;
              eqptProtGroupAlarmBitmap;
              eqptProtElementStandbyStatus.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptProtGroupEntry 3 }

   eqptProtGroupSwitchoverCount OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Wrap around counter for the number of switchovers being performed.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 0    UNITS: -"
      ::= { eqptProtGroupEntry 4 }

   eqptProtGroupLastSwitchoverReason OBJECT-TYPE
      SYNTAX INTEGER {
          noSwitchOver(1),          -- no switch over has been performed yet
          forcedActive(2),          -- chain is forced active
          boardNotPresent(3),       -- board is removed or not reachable
          extenderChainFailure(4),  -- extender chain failure
          linkFailure(5),           -- link failure
          watchDogTimeOut(6),       -- redundancy watchdog
          fileSystemCorrupt(7),     -- curruption of file system
          configurationMismatch(8), -- mismatch in boardType or Swversion
          boardUnplanned(9),        -- board has been unplanned
          boardLocked(10),          -- board has been locked
          shelfDefense(11),         -- shelf-error detected by defense
          revertiveSwitchOver(12),  -- switchover because protected board is
                                    -- operational again (in case of 1:N)
          lanxFailure(13),          -- lanx not alive
           lanxHwFailure(14),        -- active Lanx has detected a
                                    -- hardware failure
          lanxSdkFailure(15),       -- active Lanx has detected a
                                    -- SDK-failure
          dpoeAppFailure(16),       -- active DPoE has detected application failure
          dpoeUnreachable(17)       -- DPoE is not reachable
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This object contains the reason of the last switch over.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..17
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptProtGroupEntry 5 }

   eqptProtGroupEpsQuenchfactor OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This object contains a timervalue in 1/100 sec. The EpsQuench timer
          is used to prevent continuous switch-overs in case of unstable EPS.
          Value equal to zero means the quenching mechanism is disabled.
          Configuration of the EPS quenchfactor has mainly be foreseen for
          test purposes. Operators should preferably not be able to
          reconfigure the default value.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES       RANGE: See above
             PERSIST: YES   DEFVALUE: 1440000   UNITS: 0.01 seconds"
      DEFVAL { 1440000}   -- 4 hours
      ::= { eqptProtGroupEntry 6 }

   eqptProtGroupAlarmBitmap OBJECT-TYPE
      SYNTAX INTEGER (1..4294967295)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Status bitmap:
             bit 0 set means No defect at all
             bit 1 : if bit set, Standby degradation alarm is set
                     (excludes bit 0 setting)
             bit 2 .. 31 : reserved for future extensions.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA           RANGE: See above
             PERSIST: NO    DEFVALUE: 0x00000001   UNITS: -"
      ::= { eqptProtGroupEntry 7 }

   eqptProtGroupAdminStatus OBJECT-TYPE
      SYNTAX INTEGER {
         unlock(1),
         lock(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Used by the administrator to disable or enable protection within
          that protection group.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES         RANGE: 1..2
             PERSIST: YES   DEFVALUE: unlock(1)   UNITS: -"
      ::= { eqptProtGroupEntry 8 }

   eqptProtGroupAdminProtElement OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Only supported for 1:N protection groups. In case of a forced
          switchover to the spare element, this attribute is used to specify
          the element to be protected. The value 0 means that no element is
          specified.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES   RANGE: See above
             PERSIST: YES   DEFVALUE: NA    UNITS: -"
      ::= { eqptProtGroupEntry 9 }

   eqptProtGroupOperProtElement OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Only supported for 1:N protection groups. Indicates which element
          is currently protected by the spare element. The value 0 means that
          currently the spare element is not protecting any element.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptProtGroupEntry 10 }

   eqptProtGroupRowStatus OBJECT-TYPE
      SYNTAX RowStatus
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Entries in the eqptProtGroupTable can only be created at once, by
          specifying eqptProtGroupRowStatus=createAndGo(4).
          For NT protection group, if all values are valid then the
          entry is made active(1). For LT protection group, if the group
          is in service then the entry is made active(1). If the group
          is not in service then the entry is made notInService(2).
          If the object is set to destroy(6), the entry is deleted.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NO for ISAM R3.3   RANGE: See above
             PERSIST: NO    DEFVALUE: active(1)          UNITS: -"
      ::= { eqptProtGroupEntry 11 }

   --  ==================================================================
   --  |                     STOP  PROTECTIONGROUP TABLE                |
   --  ==================================================================
   --  ==================================================================
   --  |                     START PROTECTIONELEMENT TABLE              |
   --  ==================================================================

   eqptProtElementTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptProtElementEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A table representing the protected or protecting elements.
          An element can be either a board or an extension chain. Both are
          identified by the corresponding slot identifier (extension chain
          is identified by slot of corresponding NT board).
          This table has only two rows from ISAM R2.2 to R3.2.
          From R3.3 onwards, this table has a row for each slots in the
          main shelf.

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE: DEP as described above "
      ::= { eqptProt 3 }

   eqptProtElementEntry OBJECT-TYPE
      SYNTAX EqptProtElementEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the eqptProtElementTable.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptSlotId }
      ::= { eqptProtElementTable 1 }

   EqptProtElementEntry  ::= SEQUENCE {
      eqptProtElementGroupId               INTEGER,
      eqptProtElementType                  INTEGER,
      eqptProtElementStandbyStatus         INTEGER,
      eqptProtElementRedcyCtrlStatus       INTEGER,
      eqptProtElementRowStatus             RowStatus,
      eqptProtElementStandbyStatuschangeReason INTEGER
   }

   eqptProtElementGroupId OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This attributes identifies the protection group to which this
          element belongs.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NO for ISAM R3.3   RANGE: See above
             PERSIST: YES   DEFVALUE: NA                 UNITS: -"
      ::= { eqptProtElementEntry 1}

   eqptProtElementType OBJECT-TYPE
      SYNTAX INTEGER {
         normal(1),
         spare(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This attribute is used to distinguish between normal elements of
          a protection group and the spare element of a 1:N protection group.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA          RANGE: 1..2
             PERSIST: YES   DEFVALUE: normal(1)   UNITS: -"
      ::= { eqptProtElementEntry 2}

   eqptProtElementStandbyStatus OBJECT-TYPE
      SYNTAX INTEGER {
         providing-service(1),       --active and providing service
         hot-standby(2),             --standby and ready to become active
         cold-standby(3),            --standby but not synchronized
         idle(4)                     --not able to protect peer board
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute reflects the standby status of the protection
          group element.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..4
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptProtElementEntry 3}

   eqptProtElementRedcyCtrlStatus OBJECT-TYPE
      SYNTAX INTEGER {
         normal(1),
         forced-active(2)
      }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "This attribute is used to force a switchover between elements of
          a protection group or to keep one of the elements active.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: YES         RANGE: 1..2
             PERSIST: YES   DEFVALUE: normal(1)   UNITS: -"
      ::= { eqptProtElementEntry 4}

   eqptProtElementRowStatus OBJECT-TYPE
      SYNTAX RowStatus
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Entries in the eqptProtElementTable can only be created at once,
          by specifying eqptProtEelementRowStatus=createAndGo(4). If all
          values are valid then the entry is made active(1). If the object
          is set to destroy(6), the entry is deleted.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA          RANGE: See above
             PERSIST: NO    DEFVALUE: active(1)   UNITS: -"
      ::= { eqptProtElementEntry 5}

   eqptProtElementStandbyStatuschangeReason OBJECT-TYPE
      SYNTAX INTEGER {
         none(0),                     -- standby state is hot standby
                                    -- or not applicable (default value)
         protectionGroupLocked(1),    -- redundancy is not enabled
         forcedActive(2),             -- active board is put to forced active
         peerLinkUnAvailable(3),      -- standby NT link is not available
         peerLocked(4),               -- standby board is locked
         peerNotPlanned(5),           -- standby board is not planned
         peerNotPluggedIn(6),         -- standby board is not plugged in
         databaseNotInSync(7),        -- data base is not synchronized
         lanxDynamicDataNotSynced(8), -- lanx has not synchronized its data
         lanxSdkFailure(9),           -- standby Lanx has detected a
                                      -- non recoverable SDK-failure
         lanxRecovSdkFailure(10),     -- standby Lanx has deteced a
                                      -- recoverable SDK-failure
         lanxHwFailure(11),           -- standby Lanx has deteced a hardware failure
         lanxDynDataSyncFailure(12),  -- standby lanx could not
                                      -- synchronize its dynamic data
         lanxStaticSyncFailure(13),   -- standby lanx could not
                                      -- synchronize its static data
         lanxPeerCommFailure(14),     -- standby Lanx has lost communication
                                      -- with the active lanx
         lanxFailure(15),             -- standby lanx not alive
         linkGroupNotAvailable(16),   -- link group not available
         ltNotEnabled(17),            -- for LT redundancy : LT not enabled
         lanxHiGigFailure(18),        -- lanx (act or stb has detected a HiGiG
                                      -- failure
         lanxReconcileFailure(19),    -- lanx has detected a failure in the
                                      -- reconcile phase (a.k.a. bulk sync phase)
         lanxDiscoveryFailure(20),    -- act lanx is not able to detect the mate
                                      -- although the HiGig is up and running.
         dpoeAppFailure(21),          -- standby DPoE has detected application
                                      -- failure
         dpoeCommFailure(22),         -- standby DPoE has lost communication with
                                      -- active DPoE
         dpoeSyncFailure(23),         -- standby DPoE could not do synchronization
                                      -- with active DPoE
         dpoeUnreachable(24)          -- standby DPoE is not reachable

   }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This attribute reflects the reason why the standby status of the protection group element has changed.
          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA        RANGE: 0..24
             PERSIST: NO    DEFVALUE: none(0)   UNITS: -"
      ::= { eqptProtElementEntry 6}

   --  ==================================================================
   --  |                     STOP PROTECTIONELEMENT TABLE               |
   --  ==================================================================

   eqptProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 6 }

   --  ==================================================================
   --  |                     START PROFILE TABLE                        |
   --  ==================================================================

   eqptProfileTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptProfileEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A table holding the mapping between the profileId and the corresponding
          profile name.
          This table has a row for every profile in the system.

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE: DEP as described above"
      ::=  { eqptProfile 1 }

   eqptProfileEntry OBJECT-TYPE
      SYNTAX EqptProfileEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry in the eqptProfileTable.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptProfileId }
      ::=  { eqptProfileTable 1 }

   EqptProfileEntry ::= SEQUENCE {
      eqptProfileId                      AsamProfileIndex,
      eqptProfileName                    AsamProfileName,
      eqptProfileDescription             DisplayString
   }

   eqptProfileId OBJECT-TYPE
      SYNTAX AsamProfileIndex
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "A value identifying a profile.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptProfileEntry 1 }

   eqptProfileName OBJECT-TYPE
      SYNTAX AsamProfileName
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The corresponding name for a given profile id.
          The name corresponding to the ProfileId must also be unique.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptProfileEntry 2 }

   eqptProfileDescription OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "A short description for the given profile, explaining the
          key attributes.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptProfileEntry 3 }

   --  ==================================================================
   --  |                     STOP PROFILE TABLE                         |
   --  ==================================================================

   --  ==================================================================
   --  |                     START PROFILE APPLICABILITY TABLE          |
   --  ==================================================================

   eqptProfileApplicabilityTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptProfileApplicabilityEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "This table lists for every defined profile in the system for
          which boards it is applicable.
          One profile can be applicable for multiple board types.
          Multiple profiles can be applicable for the same board type.

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE: DEP as described above"
      ::=  { eqptProfile 2 }

   eqptProfileApplicabilityEntry OBJECT-TYPE
      SYNTAX EqptProfileApplicabilityEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry in the eqptProfileApplicabilityTable.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptProfileId, eqptBoardType }
      ::=  { eqptProfileApplicabilityTable 1 }

   EqptProfileApplicabilityEntry ::= SEQUENCE {
      eqptBoardType                      DisplayString,
      eqptDefaultProfile                 TruthValue
   }


   eqptBoardType OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "A string representing the board for which the profile is applicable.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptProfileApplicabilityEntry 1 }

   eqptDefaultProfile OBJECT-TYPE
      SYNTAX TruthValue
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "A flag indicating if this is the default profile for a specific
          board type.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptProfileApplicabilityEntry 2 }

   --  ==================================================================
   --  |                     STOP PROFILE APPLICABILITY TABLE           |
   --  ==================================================================

   eqptTestChainTable   OBJECT-TYPE
      SYNTAX         SEQUENCE OF EqptTestChainEntry
      ACCESS         not-accessible
      STATUS         mandatory
      DESCRIPTION
        "A table contains the test chain configuration indicating
         which shelf is connected to the TAP_UP or whether an external
         test head is connected to the TAP_UP. This table has one row
         for each planned shelf.

         ALCATEL NOTE:
            TABLESIZE: DEP as described above"
      ::=  { asamEquipmentMIB 7 }

   eqptTestChainEntry   OBJECT-TYPE
      SYNTAX         EqptTestChainEntry
      ACCESS         not-accessible
      STATUS         mandatory
      DESCRIPTION
         "An entry in the eqptTestChainTable."

      INDEX { eqptHolderId }
      ::=  { eqptTestChainTable 1 }

   EqptTestChainEntry ::= SEQUENCE {
      eqptTestChainShelfToTapUp           INTEGER,
      eqptTestChainExtTestHeadToTapUp     INTEGER
   }

   eqptTestChainShelfToTapUp     OBJECT-TYPE
      SYNTAX                     INTEGER (0..255)
      ACCESS                     read-write
      STATUS                     mandatory
      DESCRIPTION
        "A unique value to identify a shelf position which is connected
         to the TAP_UP. The value '0' (default value) indicates that it
         is not connected. This parameter is used if
         eqptTestChainExtTestHeadToTapUp is set to '1' (i.e., 'no') and
         is ignored if eqptTestChainExtTestHeadToTapUp is set to '2'
         (i.e., 'yes').

         ALCATEL NOTE:
            ACCESS: NA     USAGE: OPT      PERSIST: YES     INSRVMOD: YES
            RANGE: DEP / 0 plus the range of eqptHolderId of the shelves.
            DEFVALUE: 0 / this means that no shelf is configured to be
               connected to the TAP_UP.
            UNITS: NA      SPARSE: NO      DESCR: NA
         "
       ::= { eqptTestChainEntry 1 }

    eqptTestChainExtTestHeadToTapUp       OBJECT-TYPE
       SYNTAX                         INTEGER {
                                          no (1),
                                          yes (2)
                                      }
       ACCESS                         read-write
       STATUS                         mandatory
       DESCRIPTION
           "This parameter is used to indicate whether an external test
            head is connected to the TAP_UP.
            no (1): no external test head is connected to the TAP_UP.
            yes (2): an external test head is connected to the TAP_UP.

            ALCATEL NOTE:
                 ACCESS: NA         USAGE: OPT         PERSIST: YES
                 INSRVMOD: YES      RANGE: 1..2        DEFVALUE: 1
                 UNITS: NA          SPARSE: NO         DESCR: NA
             "
       ::= { eqptTestChainEntry 2 }


   eqptCustAlarmProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 8 }

   --  ==================================================================
   --  |                     START CUSTOMIZABLE ALARMS PROFILE TABLE    |
   --  ==================================================================

   eqptCustAlarmProfileIndexNext OBJECT-TYPE
      SYNTAX AsamNextProfileIndex
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
           "This object contains an appropriate value to be used for
            eqptCustAlarmProfileIndex
            when creating entries in the associated profile table.
            The value 0 indicates that no unassigned entries are
            available. To obtain the profile index value for a new
            entry, the manager issues a management protocol retrieval
            operation to obtain the current value of this object.
            After each retrieval, the agent should modify the value to
            the next unassigned index."
    ::= { eqptCustAlarmProfile 1 }


   eqptCustAlarmProfileTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptCustAlarmProfileEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A table representing the configurable attributes of the customizable
          alarms : a description, and the corresponding Alarm Outputs to be
          activated when this alarm occurs.

          This table has a row for each external alarms profile.  It offers data
          for a maximum of 5 external alarms.  Alarms that are not defined for
          a particular profile, need to contain default values in the fields
          corresponding to that alarm number.  Independent of the alarm number,
          the name of the profile is also present, as well as the row status.

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE: DEP as described above"
      ::=  { eqptCustAlarmProfile 2}

   eqptCustAlarmProfileEntry OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry in the eqptCustAlarmProfileTable.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptCustAlarmProfileIndex }
      ::=  { eqptCustAlarmProfileTable 1 }

   EqptCustAlarmProfileEntry ::= SEQUENCE {
      eqptCustAlarmProfileIndex                  AsamProfileIndex,
      eqptCustAlarmProfileName                   AsamProfileName,
      eqptCustAlarmProfileUsedStatus             AsamProfileRefCount,
      eqptCustAlarmProfileRowStatus              RowStatus,
      eqptCustAlarmProfileMnemonic1              DisplayString,
      eqptCustAlarmProfileDescription1           DisplayString,
      eqptCustAlarmProfileVisibleOutput1         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfileAudibleOutput1         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfilePolarity1              EqptCustAlarmProfilePolarityType,
      eqptCustAlarmProfileSeverity1              AsamAlarmSeverityType,
      eqptCustAlarmProfileMnemonic2              DisplayString,
      eqptCustAlarmProfileDescription2           DisplayString,
      eqptCustAlarmProfileVisibleOutput2         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfileAudibleOutput2         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfilePolarity2              EqptCustAlarmProfilePolarityType,
      eqptCustAlarmProfileSeverity2              AsamAlarmSeverityType,
      eqptCustAlarmProfileMnemonic3              DisplayString,
      eqptCustAlarmProfileDescription3           DisplayString,
      eqptCustAlarmProfileVisibleOutput3         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfileAudibleOutput3         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfilePolarity3              EqptCustAlarmProfilePolarityType,
      eqptCustAlarmProfileSeverity3              AsamAlarmSeverityType,
      eqptCustAlarmProfileMnemonic4              DisplayString,
      eqptCustAlarmProfileDescription4           DisplayString,
      eqptCustAlarmProfileVisibleOutput4         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfileAudibleOutput4         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfilePolarity4              EqptCustAlarmProfilePolarityType,
      eqptCustAlarmProfileSeverity4              AsamAlarmSeverityType,
      eqptCustAlarmProfileMnemonic5              DisplayString,
      eqptCustAlarmProfileDescription5           DisplayString,
      eqptCustAlarmProfileVisibleOutput5         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfileAudibleOutput5         EqptCustAlarmProfileOutputType,
      eqptCustAlarmProfilePolarity5              EqptCustAlarmProfilePolarityType,
      eqptCustAlarmProfileSeverity5              AsamAlarmSeverityType
   }

   eqptCustAlarmProfileIndex OBJECT-TYPE
      SYNTAX AsamProfileIndex
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The Customizale Alarms Profile Index.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..20
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptCustAlarmProfileEntry 1 }

  eqptCustAlarmProfileName OBJECT-TYPE
      SYNTAX AsamProfileName
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "A textual name uniquely identifying this profile.

          Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptCustAlarmProfileEntry 2 }

   eqptCustAlarmProfileUsedStatus OBJECT-TYPE
      SYNTAX AsamProfileRefCount
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Indicates the number of entities using this profile.  If the
          reference count is greater than 0, then this profile is 'in use',
          and may NOT be deleted.  If the value is 0, then this profile is
          'not in use', and can be deleted.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptCustAlarmProfileEntry 3 }

   eqptCustAlarmProfileRowStatus OBJECT-TYPE
      SYNTAX RowStatus
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Entries in the eqptCustAlarmProfileTable can only be created at
          once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4).
          If all values are valid then the entry is made active(1). If the
          object is set to destroy(6), the entry is deleted.

          ALCATEL NOTE:
             SUPPORT: YES  INSRVMOD: NA          RANGE: See above
             PERSIST: NO   DEFVALUE: active(1)   UNITS: -"
      ::= { eqptCustAlarmProfileEntry 4 }

   eqptCustAlarmProfileMnemonic1 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..16))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The mnemonic of the customizable alarm, for given Profile Index,
          for external alarm number 1.

          Maximum length is 16, allowed characters A-Z.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'UNDEF' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 5 }

   eqptCustAlarmProfileDescription1 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..40))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The description of the customizable alarm, for given
          Profile Index, for external alarm number 1.

          Maximum length is 40.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'Undefined' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 6 }

   eqptCustAlarmProfileVisibleOutput1 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the visible alarm output,
          for given Profile Index, for external alarm number 1.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 7 }

   eqptCustAlarmProfileAudibleOutput1 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the audible alarm output,
          for given Profile Index, for external alarm number 1.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 8 }

   eqptCustAlarmProfilePolarity1 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfilePolarityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether the alarm polarity is normal or inversed,
          for given Profile Index, for external alarm number 1.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: normal(2)   UNITS: -"
      ::= { eqptCustAlarmProfileEntry 9 }

   eqptCustAlarmProfileSeverity1 OBJECT-TYPE
      SYNTAX AsamAlarmSeverityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows the severity of the alarm,
          for given Profile Index, for external alarm number 1.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: 1-5
             PERSIST: YES   DEFVALUE: major(4) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 10 }

   eqptCustAlarmProfileMnemonic2 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..16))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The mnemonic of the customizable alarm, for given Profile Index,
          for external alarm number 2.

          Maximum length is 16, allowed characters A-Z.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'UNDEF' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 11 }

   eqptCustAlarmProfileDescription2 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..40))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The description of the customizable alarm, for given
          Profile Index, for external alarm number 2.

          Maximum length is 40.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'Undefined'   UNITS: -"
      ::= { eqptCustAlarmProfileEntry 12 }

   eqptCustAlarmProfileVisibleOutput2 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the visible alarm output,
          for given Profile Index, for external alarm number 2.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 13 }

   eqptCustAlarmProfileAudibleOutput2 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the audible alarm output,
          for given Profile Index, for external alarm number 2.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 14 }

   eqptCustAlarmProfilePolarity2 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfilePolarityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether the alarm polarity is normal or inversed,
          for given Profile Index, for external alarm number 2.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: normal(2), UNITS: -"
      ::= { eqptCustAlarmProfileEntry 15 }

   eqptCustAlarmProfileSeverity2 OBJECT-TYPE
      SYNTAX AsamAlarmSeverityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows the severity of the alarm,
          for given Profile Index, for external alarm number 2.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: 1-5
             PERSIST: YES   DEFVALUE: major(4) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 16 }

   eqptCustAlarmProfileMnemonic3 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..16))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The mnemonic of the customizable alarm, for given Profile Index,
          for external alarm number 3.

          Maximum length is 16, allowed characters A-Z.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'UNDEF' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 17 }

   eqptCustAlarmProfileDescription3 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..40))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The description of the customizable alarm, for given
          Profile Index, for external alarm number 3.

          Maximum length is 40.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'Undefined' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 18 }

   eqptCustAlarmProfileVisibleOutput3 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the visible alarm output,
          for given Profile Index, for external alarm number 3.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 19 }

   eqptCustAlarmProfileAudibleOutput3 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the audible alarm output,
          for given Profile Index, for external alarm number 3.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 20 }

   eqptCustAlarmProfilePolarity3 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfilePolarityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether the alarm polarity is normal or inversed,
          for given Profile Index, for external alarm number 3.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: normal(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 21 }

   eqptCustAlarmProfileSeverity3 OBJECT-TYPE
      SYNTAX AsamAlarmSeverityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows the severity of the alarm,
          for given Profile Index, for external alarm number 3.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: 1-5
             PERSIST: YES   DEFVALUE: major(4) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 22 }

   eqptCustAlarmProfileMnemonic4 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..16))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The mnemonic of the customizable alarm, for given Profile Index,
          for external alarm number 4.

          Maximum length is 16, allowed characters A-Z.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'UNDEF' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 23 }

   eqptCustAlarmProfileDescription4 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..40))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The description of the customizable alarm, for given
          Profile Index, for external alarm number 4.

          Maximum length is 40.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'Undefined' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 24 }

   eqptCustAlarmProfileVisibleOutput4 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the visible alarm output,
          for given Profile Index, for external alarm number 4.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 25 }

   eqptCustAlarmProfileAudibleOutput4 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the audible alarm output,
          for given Profile Index, for external alarm number 4.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 26 }

   eqptCustAlarmProfilePolarity4 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfilePolarityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether the alarm polarity is normal or inversed,
          for given Profile Index, for external alarm number 4.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: normal(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 27 }

   eqptCustAlarmProfileSeverity4 OBJECT-TYPE
      SYNTAX AsamAlarmSeverityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows the severity of the alarm,
          for given Profile Index, for external alarm number 4.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: 1-5
             PERSIST: YES   DEFVALUE: major(4) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 28 }

   eqptCustAlarmProfileMnemonic5 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..16))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The mnemonic of the customizable alarm, for given Profile Index,
          for external alarm number 5.

          Maximum length is 16, allowed characters A-Z.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'UNDEF' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 29 }

   eqptCustAlarmProfileDescription5 OBJECT-TYPE
      SYNTAX DisplayString (SIZE (0..40))
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The description of the customizable alarm, for given
          Profile Index, for external alarm number 5.

          Maximum length is 40.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: 'Undefined' UNITS: -"
      ::= { eqptCustAlarmProfileEntry 30 }

   eqptCustAlarmProfileVisibleOutput5 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the visible alarm output,
          for given Profile Index, for external alarm number 5.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 31 }

   eqptCustAlarmProfileAudibleOutput5 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfileOutputType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether or not to trigger the audible alarm output,
          for given Profile Index, for external alarm number 5.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: notTriggered(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 32 }

   eqptCustAlarmProfilePolarity5 OBJECT-TYPE
      SYNTAX EqptCustAlarmProfilePolarityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows whether the alarm polarity is normal or inversed,
          for given Profile Index, for external alarm number 5.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: normal(2) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 33 }

   eqptCustAlarmProfileSeverity5 OBJECT-TYPE
      SYNTAX AsamAlarmSeverityType
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "Shows the severity of the alarm,
          for given Profile Index, for external alarm number 5.

          ALCATEL NOTE:
             SUPPORT: NO    INSRVMOD: NA   RANGE: 1-5
             PERSIST: YES   DEFVALUE: major(4) UNITS: -"
      ::= { eqptCustAlarmProfileEntry 34 }

   --  ==================================================================
   --  |                     STOP CUSTOMIZABLE ALARMS PROFILE TABLE     |
   --  ==================================================================
   --  ==================================================================
   --  |            START CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE     |
   --  ==================================================================

   eqptCustAlarmProfileMappingTable OBJECT-TYPE
      SYNTAX     SEQUENCE OF EqptCustAlarmProfileMappingEntry
      ACCESS     not-accessible
      STATUS     mandatory
      DESCRIPTION
            "The table listing the profile name to profile Index
            Mapping."
      ::= { eqptCustAlarmProfile 3}

   eqptCustAlarmProfileMappingEntry OBJECT-TYPE
      SYNTAX     EqptCustAlarmProfileMappingEntry
      ACCESS     not-accessible
      STATUS     mandatory
      DESCRIPTION
            "An entry (conceptual row) representing the Customizable Alarm Profile
             Name to Index mapping.  The system automatically creates an entry in
             this table for each corresponding entry (custAlarm-profile) created
             in the eqptCustAlarmProfileTable.  Similarly, when a profile is
             deleted, the corresponding entry in this table is also automatically
             deleted by the system."
          INDEX {eqptCustAlarmProfileMappingName }
        ::= {eqptCustAlarmProfileMappingTable 1}

   EqptCustAlarmProfileMappingEntry ::= SEQUENCE {
      eqptCustAlarmProfileMappingName                  AsamProfileName,
      eqptCustAlarmProfileMappingIndex                 AsamProfileIndex
   }

   eqptCustAlarmProfileMappingName OBJECT-TYPE
      SYNTAX AsamProfileName
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "A textual name uniquely identifying this profile.
          This name has to be unique within the assigned scope.

          Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptCustAlarmProfileMappingEntry 1 }

   eqptCustAlarmProfileMappingIndex OBJECT-TYPE
      SYNTAX AsamProfileIndex
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The Customizale Alarms Profile Index.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..20
             PERSIST: YES   DEFVALUE: NA   UNITS: -"
      ::= { eqptCustAlarmProfileMappingEntry 2 }

   --  ==================================================================
   --  |              STOP CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE    |
   --  ==================================================================
   --  ==================================================================
   --  |              START MTA FIELD                                   |
   --  ==================================================================

   eqptMtaTest OBJECT IDENTIFIER ::= { asamEquipmentMIB 9 }
   eqptMtaTestHeadType OBJECT-TYPE
  SYNTAX INTEGER {
                         four-wire(1),
                         two-wire(2)
          }
  ACCESS read-write
  STATUS mandatory
  DESCRIPTION
           "setting the MTA test head type, four-wire mode or two-wire mode.
           This object should be consistent with external test head equipment,
           MTA subsystem will operate different relays based on this object.
           MTA commands will have differentiation between these two mode.

           ALCATEL NOTE:
              ACCESS: NA         USAGE: OPT         PERSIST: YES
              INSRVMOD: YES      RANGE: 1..2        DEFVALUE: 1
              UNITS: NA          SPARSE: NO         DESCR: NA"
        ::= { eqptMtaTest 1 }

   --  ==================================================================
   --  |              STOP MTA FIELD                                    |
   --  ==================================================================
   --  ==================================================================
   --  |          START BOARD THERMAL SENSOR TABLE                      |
   --  ==================================================================
   eqptBoardThermalSensorTable OBJECT-TYPE
    SYNTAX SEQUENCE OF EqptBoardThermalSensorEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
             "A table representing the actual value and thresholds of Thermal Sensor(s) on boards.
             One entry corresponds to each sensor on board.
             The entries are presented only when the board is plugged in, operationally up, has thermal sensors on it, and when operator put a read request for it.

             ALCATEL NOTE:
             SUPPORT: YES  TABLESIZE: DEP as described above"
          ::= { asamEquipmentMIB 10 }

   eqptBoardThermalSensorEntry OBJECT-TYPE
    SYNTAX EqptBoardThermalSensorEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
             "An entry of the equipment thermal sensor table on boards

             ALCATEL NOTE:
             SUPPORT: YES"
             INDEX {eqptSlotId, eqptBoardThermalSensorId}
          ::= {eqptBoardThermalSensorTable 1}

   EqptBoardThermalSensorEntry ::= SEQUENCE{
    eqptBoardThermalSensorId      INTEGER,
    eqptBoardThermalSensorActualTemperature    INTEGER,
    eqptBoardThermalSensorTcaThresholdLow    INTEGER,
    eqptBoardThermalSensorTcaThresholdHigh    INTEGER,
    eqptBoardThermalSensorShutdownThresholdLow  INTEGER,
    eqptBoardThermalSensorShutdownThresholdHigh  INTEGER
    }

  eqptBoardThermalSensorId OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
            "Index of thermal sensors on board.

            ALCATEL NOTE:
            SUPPORT: YES   INSRVMOD: NA     RANGE: 1..15
            PERSIST: NO    DEFVALUE: NA         UNITS: - "
         ::= { eqptBoardThermalSensorEntry 1}

   eqptBoardThermalSensorActualTemperature OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
            "Actual Temperature value read from thermal sensor on board.

            ALCATEL NOTE:
            SUPPORT: YES   INSRVMOD: NA     RANGE: -40..150
            PERSIST: NO    DEFVALUE: NA         UNITS: degree Celsius"
         ::={ eqptBoardThermalSensorEntry 2}

   eqptBoardThermalSensorTcaThresholdLow  OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
             "Low Tca threshold of thermal sensor on Board

             ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA     RANGE: NA
             PERSIST: NO    DEFVALUE: NA         UNITS: degree Celsius"
          ::= { eqptBoardThermalSensorEntry 3}

   eqptBoardThermalSensorTcaThresholdHigh  OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
             "High Tca threshold of thermal sensor on Board

             ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA     RANGE: NA
             PERSIST: NO    DEFVALUE: NA         UNITS: degree Celsius"
         ::={ eqptBoardThermalSensorEntry 4}

   eqptBoardThermalSensorShutdownThresholdLow  OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
             "Low Shutdown threshold of thermal sensor on Board

             ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA     RANGE: NA
             PERSIST: NO    DEFVALUE: NA         UNITS: degree Celsius"
         ::={ eqptBoardThermalSensorEntry 5}

   eqptBoardThermalSensorShutdownThresholdHigh  OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
             "High Shutdown threshold of thermal sensor on Board

             ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA     RANGE: NA
             PERSIST: NO    DEFVALUE: NA         UNITS: degree Celsius"
         ::={ eqptBoardThermalSensorEntry 6}
   --  ==================================================================
   --  |          STOP BOARD THERMAL SENSOR TABLE                      |
   --  ==================================================================
   --  ==================================================================
   --  |                     START PORTMAPPING TABLE                    |
   --  ==================================================================


   eqptPortMappingTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptPortMappingEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Equipment PortMapping table, showing the mapping between logical ports
          and physical ports (faceplate numbering).

          This table contains one row per logical port on the xHUB.

          ALCATEL NOTE:
             SUPPORT: YES  TABLESIZE: DEP as described above"
      ::= { asamEquipmentMIB 13 }

   eqptPortMappingEntry OBJECT-TYPE
      SYNTAX EqptPortMappingEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the equipment PortMapping table.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptPortMappingLogPortNbr }
      ::= { eqptPortMappingTable 1 }


   EqptPortMappingEntry ::= SEQUENCE {
      eqptPortMappingLogPortNbr            EqptPortMappingIndex,
      eqptPortMappingLogPortType           INTEGER,
      eqptPortMappingPhyPortSlot           EqptSlotIndex,
      eqptPortMappingPhyPortType           INTEGER,
      eqptPortMappingPhyPortNbr            INTEGER,
      eqptPortMappingLSMSlot               EqptSlotIndex,
      eqptPortMappingChanges             Counter
   }

   eqptPortMappingLogPortNbr OBJECT-TYPE
      SYNTAX EqptPortMappingIndex
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Index in equipment PortMapping Table: corresponds to the logical
          port id on the xHUB.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptPortMappingEntry 1 }

   eqptPortMappingLogPortType OBJECT-TYPE
      SYNTAX INTEGER {
          uplink (1),    --
          downlink (2),  --
          hostlink (3),  --
          internal (4)   --
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The logical port type corresponds to the link classification.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..4
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptPortMappingEntry 2 }

   eqptPortMappingPhyPortSlot OBJECT-TYPE
      SYNTAX EqptSlotIndex
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The equipment slot index of the physical port.
          This slot will point to either a NT or NTIO slot position.

          This field is not applicable for hostlinks or internal, in which case it gets
          the value 0xFFFF

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: 0    UNITS: -"
      ::= { eqptPortMappingEntry 3 }

   eqptPortMappingPhyPortType OBJECT-TYPE
      SYNTAX INTEGER {
         not-applicable(1),
         sfp(2),
         xfp(3),
         vp(5),
         eth(10),
         mcast(11),
         ai(12),
         ieee(13),
         cfp(14)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The physcial port type.

          This field is not applicable for hostlinks.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 1..3,5,10,11,12,13,14
             PERSIST: NO    DEFVALUE: 0    UNITS: -"
      ::= { eqptPortMappingEntry 4 }

   eqptPortMappingPhyPortNbr OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The pysical port number, which corresponds to the faceplate number
          of the sfp/xfp port.

          This field is not applicable for hostlinks or internal, in which case it gets
          the value 0xFF.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: 0    UNITS: -"
      ::= { eqptPortMappingEntry 5 }

   eqptPortMappingLSMSlot OBJECT-TYPE
      SYNTAX EqptSlotIndex
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The equipment slot index of the corresponding LSM slot.

          This field is only applicable for hostlinks, and downlinks to which
          a remote LSM slot is assigned. In other cases it gets the value
          0xFFFF.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: 0    UNITS: -"
      ::= { eqptPortMappingEntry 6 }

  eqptPortMappingChanges OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX.
         ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: 0-MAX
             PERSIST: NO    DEFVALUE: 0    UNITS: -"
        ::= { eqptPortMappingEntry 7}

       eqptPortMappingGlobalChangeCounter OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "This counter represents the number of global PortMapping configuration changes. It is a wraparound counter between 0 and MAX.
            SUPPORT: YES   INSRVMOD: NA   RANGE: 0-MAX
             PERSIST: NO    DEFVALUE: 0    UNITS: -"
      ::= { asamEquipmentMIB 14 }

   --  ==================================================================
   --  |                     STOP PORTMAPPING TABLE                     |
   --  ==================================================================
   --  ==================================================================
   --  |                START ANY-TO-ANY PORTPROTECTION TABLE           |
   --  ==================================================================

        eqptPortProtectionTable  OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptPortProtectionEntry
      ACCESS    not-accessible
      STATUS    mandatory
      DESCRIPTION
         "This table holds the port protection groups"
      ::= { asamEquipmentMIB  15 }

        eqptPortProtectionEntry  OBJECT-TYPE
      SYNTAX    EqptPortProtectionEntry
      ACCESS    not-accessible
      STATUS    mandatory
      DESCRIPTION
         "This entry represents a protection group which consists of two
          ports.  These two ports can be on the same LT board, or on
          different LT's."
      INDEX     { eqptPortProtectionPortId }
    ::= { eqptPortProtectionTable 1 }

        EqptPortProtectionEntry ::= SEQUENCE {
      eqptPortProtectionPortId        InterfaceIndex,
      eqptPortProtectionRowStatus            RowStatus,
      eqptPortProtectionPairedPortId     InterfaceIndex,
      eqptPortProtectionPortStatus    INTEGER,
      eqptPortProtectionPairedPortStatus INTEGER,
      eqptPortProtectionSwitchCommand        InterfaceIndex,
      eqptPortProtectionLastSwitchReason     INTEGER,
      eqptPortProtectionNumberOfSwitchovers  INTEGER
        }

        eqptPortProtectionPortId  OBJECT-TYPE
      SYNTAX    InterfaceIndex
      ACCESS    read-only
      STATUS    mandatory
      DESCRIPTION
                "Each row is indexed by the IfIndex of the
                 primary port of the protection group, the one which
                 is protected.
                 Only PON ports can be selected."
        ::= { eqptPortProtectionEntry 1 }

        eqptPortProtectionRowStatus  OBJECT-TYPE
      SYNTAX    RowStatus
      ACCESS    read-write
      STATUS    mandatory
      DESCRIPTION
                "All rows instantiated using 'create-and-go' to
                 mate 2 ports in a protection group. Set to 'destroy' to
                 eliminate the protection group.

                 RULE 1 - Cannot create a protection group on an LT card
                          that doesn't support any-to-any redundancy.

                 RULE 2 - Cannot mate two ports in a protection group if
                          the paired port has already one or more
                          interface(s) defined on top of the physical link
                          interface.

                 RULE 3 - Cannot delete a protection group if paired
                          port is Admin UP."
        ::= { eqptPortProtectionEntry 2 }

        eqptPortProtectionPairedPortId  OBJECT-TYPE
      SYNTAX    InterfaceIndex
      ACCESS    read-write
      STATUS    mandatory
      DESCRIPTION
                " This attribute represents the IfIndex of the paired
                  port.  Only PON ports can be selected.

                   Must satisfy the following VALIDATIONs (otherwise OLT
                   should reject):
                   1) IfIndex must represent a real port.
                   2) PON cannot have any provisioned (planned) ONTs.
                   3) Cannot mate a PON with itself.
                   4) Cannot mate with a PON that is already mated in a
                      protection scheme."
        ::= { eqptPortProtectionEntry 3 }

   eqptPortProtectionPortStatus OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                " This attribute represents the status of the primary port.

                   Following DEFINITIONS apply:
                   Active - means the port is used for transmission.
                   Inactive - means the system is NOT using the port for
                   transmission.
                   Up - means the port is capable of being used for
                   transmission/reception.
                   Down - means the port is NOT capable of being used for
                   transmission/reception (this includes a port that is
                   ADMIN down as well as a port that is down due to an
                   operational fault).

                   Enumerations are as follows:

                   1 = Active Up
                   2 = Active Down
                   3 = Inactive Up
                   4 = Inactive Down"
        ::= { eqptPortProtectionEntry 4 }

   eqptPortProtectionPairedPortStatus OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                " This attribute represents the status of the paired
                  port.

                   Following DEFINITIONS apply:
                   Active - means the port is used for transmission.
                   Inactive - means the system is NOT using the port for
                   transmission.
                   Up - means the port is capable of being used for
                   transmission/reception.
                   Down - means the port is NOT capable of being used for
                   transmission/reception (this includes a port that is
                   ADMIN down as well as a port that is down due to an
                   operational fault).

                   Enumerations are as follows:

                   1 = Active Up
                   2 = Active Down
                   3 = Inactive Up
                   4 = Inactive Down"
        ::= { eqptPortProtectionEntry 5 }

   eqptPortProtectionSwitchCommand OBJECT-TYPE
        SYNTAX  InterfaceIndex
        ACCESS  write-only
        STATUS  mandatory
        DESCRIPTION
                " This attribute represents the IfIndex of the desired port
                  to switch over to.

                   Must satisfy the following VALIDATIONs (otherwise OLT
                   should reject):
                   1) IfIndex must represent a real port.
                   2) IfIndex must be part of a protection group.
                   3) IfIndex must be either the primary or the paired port
                      of the protection group on which the switchover is
          triggered."
        ::= { eqptPortProtectionEntry 6 }

   eqptPortProtectionLastSwitchReason OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                " This attribute contains the reason for the last port
                  switchover (if any).

                   0 = No switch has occurred (since last LT startup).
                   1 = Manual switch due to port Admin State change.
                   2 = Manual switch due to usage of Switch command.
                   3 = Automatic switch due to system determination.
                   4 = Automatic switch due to LT failure."
        ::= { eqptPortProtectionEntry 7 }

   eqptPortProtectionNumberOfSwitchovers OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                " This attribute contains the number of switchovers since
                  last LT startup."
        ::= { eqptPortProtectionEntry 8 }

   --  ==================================================================
   --  |                STOP ANY-TO-ANY PORTPROTECTION TABLE            |
   --  ==================================================================
   --  ==================================================================
   --  |                START ANY-TO-ANY PORTPROTECTION LOOKUP TABLE    |
   --  ==================================================================

        eqptPortProtectionLookupTable  OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptPortProtectionLookupEntry
      ACCESS    not-accessible
      STATUS    mandatory
      DESCRIPTION
         "This table holds the lookup port protection groups"
      ::= { asamEquipmentMIB  16 }

        eqptPortProtectionLookupEntry  OBJECT-TYPE
      SYNTAX    EqptPortProtectionLookupEntry
      ACCESS    not-accessible
      STATUS    mandatory
      DESCRIPTION
         "This entry represents a lookup protection group which consists
          of two ports.  The key is either a primary or a paired port
          in the eqptPortProtectionTable."
      INDEX     { eqptPortProtectionLookupPortId }
    ::= { eqptPortProtectionLookupTable 1 }

        EqptPortProtectionLookupEntry ::= SEQUENCE {
      eqptPortProtectionLookupPortId        InterfaceIndex,
      eqptPortProtectionLookupPrimaryPortId InterfaceIndex
        }

        eqptPortProtectionLookupPortId  OBJECT-TYPE
      SYNTAX    InterfaceIndex
      ACCESS    read-only
      STATUS    mandatory
      DESCRIPTION
                "Each row is indexed by the IfIndex of a port in a
                 protection group, either a primary or a paired port.
                 Only PON ports can be selected."
        ::= { eqptPortProtectionLookupEntry 1 }


        eqptPortProtectionLookupPrimaryPortId  OBJECT-TYPE
      SYNTAX    InterfaceIndex
      ACCESS    read-only
      STATUS    mandatory
      DESCRIPTION
                " This attribute represents the IfIndex of the primary
                  port of the protection group to which the key port
                  belongs.
                  Only PON ports can be selected."
        ::= { eqptPortProtectionLookupEntry 2 }


   --  ==================================================================
   --  |                STOP ANY-TO-ANY PORTPROTECTION LOOKUP TABLE     |
   --  ==================================================================
   --  ==================================================================
   --  |                    START PLANNED RESOURCE TABLE                |
   --  ==================================================================
   eqptBoardPlannedResourceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF EqptBoardPlannedResourceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
             "A table representing the actual values of configured hardware
             resources on boards.
             This table only displays entries for resources on the boards
             that support this view. These are boards for which the relation
             between HW resource consumption and system configuration is not
             trivial.
             If the board is not supporting this view, then no entries will
             be displayed. The board does not physically need to be present
             for displaying the resources.

             ALCATEL NOTE:
             SUPPORT: YES  TABLESIZE: DEP as described above"
          ::= { asamEquipmentMIB 17 }

   eqptBoardPlannedResourceEntry OBJECT-TYPE
    SYNTAX EqptBoardPlannedResourceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
             "An entry of the equipment planned resource table

             ALCATEL NOTE:
             SUPPORT: YES"
             INDEX {eqptSlotId, eqptBoardPlannedResourceId}
          ::= {eqptBoardPlannedResourceTable 1}

   EqptBoardPlannedResourceEntry ::= SEQUENCE{
    eqptBoardPlannedResourceId             INTEGER,
    eqptBoardPlannedResourceCurrentValue  INTEGER,
    eqptBoardPlannedResourceMaxValue      INTEGER,
    eqptBoardPlannedResourceDescription    DisplayString
    }

  eqptBoardPlannedResourceId OBJECT-TYPE
   SYNTAX INTEGER
   ACCESS not-accessible
   STATUS mandatory
   DESCRIPTION
            "Index of the planned resource for a board

            ALCATEL NOTE:
            SUPPORT: YES   INSRVMOD: NA     RANGE: NA
            PERSIST: NO    DEFVALUE: NA         UNITS: - "
         ::= { eqptBoardPlannedResourceEntry 1}

   eqptBoardPlannedResourceCurrentValue OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
            "The actual planned value for the resource

            ALCATEL NOTE:
            SUPPORT: YES   INSRVMOD: NA     RANGE: NA
            PERSIST: NO    DEFVALUE: NA         UNITS: - "
         ::={ eqptBoardPlannedResourceEntry 2}

   eqptBoardPlannedResourceMaxValue OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
            "The maximum value that the board supports for this resource.

            ALCATEL NOTE:
            SUPPORT: YES   INSRVMOD: NA     RANGE: NA
            PERSIST: NO    DEFVALUE: NA         UNITS: - "
         ::={ eqptBoardPlannedResourceEntry 3}

   eqptBoardPlannedResourceDescription OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
            "A string describing the planned resource for this board.

            ALCATEL NOTE:
            SUPPORT: YES   INSRVMOD: NA     RANGE: NA
            PERSIST: NO    DEFVALUE: NA         UNITS: - "
         ::={ eqptBoardPlannedResourceEntry 4}

   --  ==================================================================
   --  |                     STOP PLANNED RESOURCE TABLE                |
   --  ==================================================================
   --  ==================================================================
   --  |                    START POWER MANAGEMENT TABLE                |
   --  ==================================================================

eqptPowerTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptPowerEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Equipment power table, representing the power management objects per
          system, rack or shelf.
          This table contains one row for the system, rack or shelf that is
          subject to power management. In other cases no entry is instantiated.

          ALCATEL NOTE:
             SUPPORT: YES  TABLESIZE: DEP as described above"
      ::= { asamEquipmentMIB 18 }

   eqptPowerEntry OBJECT-TYPE
      SYNTAX EqptPowerEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the equipment power table.
          An entry will be instantiated for a system/rack or shelf with active
          power management functionality.
          At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned
          RANI-B/RPNI-B comply to this requirement.

          ALCATEL NOTE:
          SUPPORT: YES "
      INDEX { eqptPowerId }
      ::= { eqptPowerTable 1 }

   EqptPowerEntry ::= SEQUENCE {
      eqptPowerId                  EqptHolderIndex,
      eqptPowerAdminMode           INTEGER,
      eqptPowerOperMode            INTEGER,
      eqptPowerBatType             INTEGER,
      eqptPowerBatStartCapacity    INTEGER,
      eqptPowerBatPlannedLifetime  INTEGER,
      eqptPowerBatState            INTEGER,
      eqptPowerBatFailure          INTEGER,
      eqptPowerBatTemperature      INTEGER,
      eqptPowerBatActualCapacity   INTEGER,
      eqptPowerBatDefenseMode      INTEGER,
      eqptPowerBatDefenseThreshold INTEGER,
      eqptPowerACState             INTEGER,
      eqptPowerACFailure           INTEGER,
      eqptPowerNDCaState           INTEGER,
      eqptPowerNDCaFailure         INTEGER,
      eqptPowerNDCbState           INTEGER,
      eqptPowerNDCbFailure         INTEGER,
      eqptPowerLDCaState           INTEGER,
      eqptPowerLDCaFailure         INTEGER,
      eqptPowerLDCbState           INTEGER,
      eqptPowerLDCbFailure         INTEGER,
      eqptPowerInVoltage           INTEGER,
      eqptPowerInCurrent           INTEGER,
      eqptPowerInConsumedPower     INTEGER
   }

   eqptPowerId OBJECT-TYPE
      SYNTAX EqptHolderIndex
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Index in equipment Power Table.
          Index gives the shelf identification.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA   RANGE: See above
          PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptPowerEntry 1 }

   eqptPowerAdminMode OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-powermgnt (0),
          ac (1),
          ac-and-dc-local (2),
          dc-network (3),
          dc-network-and-dc-local (4),
          dc-local (5)
         }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "The eqptPowerAdminMode shows the configured power mode.
          This configured mode will be used to mask any failures detected
          for non-supported modes.
          Enumeration is as follows:
             0 = no powermanagement mode configured
             1 = AC -> failures on DC local and DC network suppressed
             2 = AC + DC local -> failures on DC network suppressed
             3 = DC network -> failures on AC or DC local suppressed
             4 = DC network + DC local -> failures on AC suppressed
             5 = DC local -> failures on DC network or AC suppressed
          Configuration of the eqptPowerAdminMode is not mandatory and will
          not impact the behavior of the power module.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: YES   DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 2}

   eqptPowerOperMode OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-powermgnt (0),
          ac (1),
          ac-and-dc-local (2),
          dc-network (3),
          dc-network-and-dc-local (4),
          dc-local (5),
          battery-fallback (6)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The eqptPowerOperMode shows the power mode the NE is using at the
          moment of reading.
          The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO
          (e.g. RANI-B or RPNI-B) will provide valid information for this
          object.
          Other systems without Power mode support get no-powermgnt (0).
          Enumeration is as follows:
             0 = system without an active power management
             1 = AC
             2 = AC + DC local
             3 = DC network
             4 = DC network + DC local
             5 = DC local
             6 = Battery fallback, i.e. only battery provides power to the system.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 3}

   eqptPowerBatType OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-configured (0),
          agm-vrla-PbCa-battery (1),
          agm-vrla-Pure-Pb-battery (2),
          flooded-battery (3),
          gel-battery (4)
         }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "
          This object is used to configure the battery type.
          This configuration only possible for planned powermanagement devices,
          in this case a planned RANI-B or RPNI-B. Only values for supported
          battery types are possible (e.g. in R51 only AGM/VRLA Lead Calcium
          BATTERY (1) is supported for the RANI-B/RPNI-B)
          The configured value is used to configure the power management driver.
          The link between the configurable value and the battery type is:
            0 = no battery configured
            1 = AGM/VRLA Lead Calcium BATTERY
            2 = AGM/VRLA Pure Lead BATTERY
            3 = FLOODED BATTERY
            4 = GEL BATTERY

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: YES   DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 4}

   eqptPowerBatStartCapacity OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "
          The capacity (Ah) of the battery at the moment of installation.
          The value of the capacity is in 1/100 Ah.
          Instatiated when eqptPowerBatType is configured.
          The configuration of this object is mandatory together with the
          configuration of the eqptPowerBatType

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: 1000 .. 10000
          PERSIST: YES   DEFVALUE: 1000   UNITS: 1/10O Ah "
      ::= { eqptPowerEntry 5}

   eqptPowerBatPlannedLifetime OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "
          Planned lifetime of the installed battery in 1/10 year.
          The planned lifetime, together with the start capacity, is used to
          calculate the actual maximal capacity of the battery.
          Instatiated when eqptPowerBatType is configured.
          The configuration of this object is mandatory together with the
          configuration of the eqptPowerBatType


          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: 0 .. 150
          PERSIST: YES   DEFVALUE: 0      UNITS: 1/10 Year "
      ::= { eqptPowerEntry 6}

   eqptPowerBatState OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-configured (0),
          no-data (1),
          charging (2),
          charged (3),
          discharging (4)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The battery state will provide a view on the state of the battery.
          Possible states are: charging, charged and discharging.
          This operational state has meaning for devices that have a configured
          eqptPowerBatType. Other devices get a not-configured (0) value returned.
          Enumeration is as follows:
            1 = no data available, e.g. battery configured, but not connected
            2 = charging
            3 = charged
            4 = discharging

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 7}

   eqptPowerBatFailure OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-applicable (0),
          voltage-good (1),
          voltage-out-of-range (2),
          over-voltage (3),
          over-temperature (4),
          battery-depleted (5)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The battery failure state will provide an view on the failure state of
          the battery.
          This failure state has meaning for devices that have a configured
          eqptPowerBatType and eqptPowerBatState different from default or
          no-data. Other devices get a not-applicable (0) value returned.
          Specific ranges for the failure cases strongly depend on the battery type
          used. The ranges will be detailed in the customer documentation.
          Enumeration is as follows:
            0 = not applicable
            1 = voltage good
            2 = voltage out of range
            3 = over-voltage
            4 = over-temperature alarm on local temperature sensor
            5 = battery depleted

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 8}

   eqptPowerBatTemperature OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Measured temperature of the battery in 1/10 Celcius
          The value is only readable when the battery type (eqptPowerBatType)
          is configured and the battery is installed and reachable.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: -1000 .. 1000
          PERSIST: NO    DEFVALUE: 0      UNITS: 1/10 Celcius "
      ::= { eqptPowerEntry 9}

   eqptPowerBatActualCapacity OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The capacity (in % of a fully charged battery) of the battery.
          The value is only readable when the battery type (eqptPowerBatType)
          is configured and the battery is installed and reachable.
          Default value of 0% is returned when the battery is not reachable.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: 0 - 100
          PERSIST: NO    DEFVALUE: 0      UNITS: % "
      ::= { eqptPowerEntry 10}

   eqptPowerBatDefenseMode OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-defense (0),
          voice-priority (1)
         }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "
          The battery defense modes offers the operator the possibility to
          select the preferred power defense mode in case the system falls
          back to the battery mode. The power defense mode is a way to
          optimize the power consumption. In R5001 two options are possible.
          In later releases additional defense modes will be introduced.
          - no battery defense. In this mode the system will run normally,
            offering regular service until the battery runs out and the
            regular hw defenses are started (Dying Gasp)
          - voice priority. In this mode when the system falls back to the
            battery the regular service will be maintained until the battery
            drains until 90% and will then give priority to the voice LT's by
            powering down the DSL LT's. Voice service will be maintained until
            the battery runs out and the regular hw defenses are started (Dying
            Gasp).
          This configuration only possible for planned powermanagement devices,
          in this case a planned RANI-B or RPNI-B.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: YES   DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 11}

   eqptPowerBatDefenseThreshold OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
         "
          The threshold gives an indication of the remaining capacity of the
          battery at the moment the defense defined in eqptPowerBatDefenseMode
          should be started. The value is in %. In the default case the configured
          defense mode is immediately activated.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: 0-100
          PERSIST: YES   DEFVALUE: 80     UNITS: % "
      ::= { eqptPowerEntry 12}


   eqptPowerACState OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-powermgnt (0),
          active (1),
          active-failure (2),
          failure (3)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The AC power state will provide an view on the state of the AC Power
          supply.
          The value is different from no-powermgnt (0) for devices with power
          management functionality and AC input available.
          Enumeration is as follows:
            0 = no-powermgnt
            1 = active
            2 = active-failure, i.e. in failure, but still providing power
            3 = failure

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 13}

   eqptPowerACFailure OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-applicable (0),
          voltage-good (1),
          voltage-out-of-range (2)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The AC failure state will provide an view on the failure state of
          the AC power supply.
          This failure state has meaning when eqptPowerACstate different from
          default. In other cases not-applicable (0) is returned.
          Specific ranges for the failure cases strongly depend on the AC power
          used. The ranges will be detailed in the customer documentation.
          Enumeration is as follows:
            0 = not-applicable
            1 = voltage good
            2 = voltage out of range

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 14}

   eqptPowerNDCaState OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-powermgnt (0),
          active (1),
          active-failure (2),
          failure (3)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The NDCa (Network DC a) state will provide an view on the state of
          the Network DC Power supply.
          The value is different from no-powermgnt (0) for devices with power
          management functionality and NDC a input available.
          Enumeration is as follows:
            0 = no-powermgnt
            1 = active
            2 = active-failure, i.e. in failure, but still providing power
            3 = failure

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 15}

   eqptPowerNDCaFailure OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-applicable (0),
          voltage-good (1),
          low-voltage(2),
          under-voltage(3)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The NDCa failure state will provide an view on the failure state of
          the Network DC a power supply.
          This failure state has meaning when eqptPowerNDCaState different from
          default. In other cases not-applicable (0) is returned.
          Specific ranges for the failure cases strongly depend on the DC power
          used. The ranges will be detailed in the customer documentation.
          Enumeration is as follows:
            0 = not-applicable
            1 = voltage-good
            2 = low-voltage
            3 = under-voltage

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 16}

   eqptPowerNDCbState OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-powermgnt (0),
          active (1),
          active-failure (2),
          failure (3)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The NDCb (Network DC a) state will provide an view on the state of
          the Network DC b power supply.
          The value is different from no-powermgnt (0) for devices with power
          management functionality and NDC b input available.
          Enumeration is as follows:
            0 = no-powermgnt
            1 = active
            2 = active-failure, i.e. in failure, but still providing power
            3 = failure

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 17}

   eqptPowerNDCbFailure OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-applicable (0),
          voltage-good (1),
          low-voltage(2),
          under-voltage(3)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The NDCb failure state will provide an view on the failure state of
          the Network DC b power supply.
          This failure state has meaning when eqptPowerNDCbState different from
          default. In other cases not-applicable (0) is returned.
          Specific ranges for the failure cases strongly depend on the DC power
          used. The ranges will be detailed in the customer documentation.
          Enumeration is as follows:
            0 = not-applicable
            1 = voltage-good
            2 = low-voltage
            3 = under-voltage

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 18}

   eqptPowerLDCaState OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-powermgnt (0),
          active (1),
          active-failure (2),
          failure (3)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The LDCa power state will provide an view on the state of the local
          DC a power supply.
          The value is different from no-powermgnt (0) for devices with power
          management functionality and LDC a input available.
          Enumeration is as follows:
            0 = no-powermgnt
            1 = active
            2 = active-failure, i.e. in failure, but still providing power
            3 = failure

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 19}

   eqptPowerLDCaFailure OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-applicable (0),
          voltage-good (1),
          voltage-out-of-range (2)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The LDCa failure state will provide an view on the failure state of
          the local DC a power supply.
          This failure state has meaning when eqptPowerLDCaState different from
          default. In other cases not-applicable (0) is returned.
          Enumeration is as follows:
            0 = not-applicable
            1 = voltage good
            2 = voltage out of range

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 20}

   eqptPowerLDCbState OBJECT-TYPE
      SYNTAX INTEGER
         {
          no-powermgnt (0),
          active (1),
          active-failure (2),
          failure (3)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The LDCb power state will provide an view on the state of the local
          DC b power suply.
          The value is different from no-powermgnt (0) for devices with power
          management functionality and LDC b input available.
          Enumeration is as follows:
            0 = no-powermgnt
            1 = active
            2 = active-failure, i.e. in failure, but still providing power
            3 = failure

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 21}

   eqptPowerLDCbFailure OBJECT-TYPE
      SYNTAX INTEGER
         {
          not-applicable (0),
          voltage-good (1),
          voltage-out-of-range (2)
         }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          The LDCb failure state will provide an view on the failure state of
          the local DC b power supply.
          This failure state has meaning when eqptPowerLDCbState different from
          default. In other cases not-applicable (0) is returned.
          Enumeration is as follows:
            0 = not-applicable
            1 = voltage good
            2 = voltage out of range

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: 0      UNITS: - "
      ::= { eqptPowerEntry 22}

   eqptPowerInVoltage OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Measured incoming voltage in 1/10 Volt
          Only supported for devices that host an extended power management
          function (e.g RANI-B and RPNI-B).

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: 0 .. 2650
          PERSIST: NO    DEFVALUE: 0      UNITS: 1/10 Volt "
      ::= { eqptPowerEntry 23}

   eqptPowerInCurrent OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Measured incoming current in 1/10 Ampere
          Only supported for devices that host an extended power management
          function (e.g RANI-B and RPNI-B).

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: 0 .. 60
          PERSIST: NO    DEFVALUE: 0      UNITS: 1/10 Ampere "
      ::= { eqptPowerEntry 24}

   eqptPowerInConsumedPower OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Calculated incoming consumed power in 1/10 Watt
          Only supported for devices that host an extended power management
          function (e.g RANI-B and RPNI-B).

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: 0 .. 6000
          PERSIST: NO    DEFVALUE: 0      UNITS: 1/10 Watt "
      ::= { eqptPowerEntry 25}

   --  ==================================================================
   --  |                    STOP POWER MANAGEMENT OBJECTS               |
   --  ==================================================================
   --  ==================================================================
   --  |                START POWER SUPPLY MANAGEMENT TABLE             |
   --  ==================================================================
eqptPowerSupplyTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptPowerSupplyEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Equipment power table, representing the power suplly management objects
          This table contains one row per power supply supported on the system.
          In other cases no entry is instantiated.

          ALCATEL NOTE:
             SUPPORT: YES  TABLESIZE: DEP as described above"
      ::= { asamEquipmentMIB 19 }

   eqptPowerSupplyEntry OBJECT-TYPE
      SYNTAX EqptPowerSupplyEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the equipment power table.
          An entry will be instantiated per power supply supported on the system.

          ALCATEL NOTE:
          SUPPORT: YES "
      INDEX { eqptPowerSupplyId }
      ::= { eqptPowerSupplyTable 1 }

   EqptPowerSupplyEntry ::= SEQUENCE {
      eqptPowerSupplyId                    EqptPowerSupplyIndex,
      eqptPowerSupplyPartNumber            OCTET STRING,
      eqptPowerSupplyCleiCode              OCTET STRING,
      eqptPowerSupplySerNumber             OCTET STRING,
      eqptPowerSupplyVin                   INTEGER,
      eqptPowerSupplyIin                   INTEGER,
      eqptPowerSupplyVout                  INTEGER,
      eqptPowerSupplyIout                  INTEGER,
      eqptPowerSupplyTemperature           INTEGER,
      eqptPowerSupplyFaultVin              INTEGER,
      eqptPowerSupplyFaultVout             INTEGER,
      eqptPowerSupplyFaultIin              INTEGER,
      eqptPowerSupplyFaultIout             INTEGER,
      eqptPowerSupplyFaultTemperature      INTEGER,
      eqptPowerSupplyFaultCml              INTEGER,
      eqptPowerSupplyPresent               INTEGER,
      eqptPowerSupplyFaultDetected         INTEGER
   }

   eqptPowerSupplyId OBJECT-TYPE
      SYNTAX EqptPowerSupplyIndex
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Index in equipment Power Supply Table.
          This is a number representing the Nth power supply present in the system.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA   RANGE: See above
          PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptPowerSupplyEntry 1}

   eqptPowerSupplyPartNumber OBJECT-TYPE
      SYNTAX OCTET STRING(SIZE(13))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the part number of the installed power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 2}

   eqptPowerSupplyCleiCode OBJECT-TYPE
      SYNTAX OCTET STRING(SIZE(11))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the CLEI code of the installed power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 3}

   eqptPowerSupplySerNumber OBJECT-TYPE
      SYNTAX OCTET STRING(SIZE(19))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the serial number of the installed power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 4}

   eqptPowerSupplyVin OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the incoming voltage arriving at the power supply in millivolt

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 5}

   eqptPowerSupplyIin OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the incoming current arriving at the power supply in milliampere

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 6}

   eqptPowerSupplyVout OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the output voltage provided by the power supply in millivolt

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 7}

   eqptPowerSupplyIout OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the output current provided by the power supply in milliampere

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 8}

   eqptPowerSupplyTemperature OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the temperature of the power supply in millidegree

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 9}

   eqptPowerSupplyFaultVin OBJECT-TYPE
      SYNTAX INTEGER
      {
        no-error (0),
        input-overvoltage-fault (1),
        input-overvoltage-warning (2),
        input-undervoltage-warning (3),
        input-undervoltage-fault (4),
        input-ac-nok-fault (5),
        input-ac-nok-warning (6),
        unit-off-for-insufficient-input-voltage (7)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the fault or warning occurring for the input voltage

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 10}

   eqptPowerSupplyFaultVout OBJECT-TYPE
      SYNTAX INTEGER
      {
        no-error (0),
        output-overvoltage-fault (1),
        output-overvoltage-warning (2),
        output-undervoltage-warning (3),
        output-undervoltage-fault (4)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the fault or warning occurring for the output voltage

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerSupplyEntry 11}

   eqptPowerSupplyFaultIin OBJECT-TYPE
      SYNTAX INTEGER
      {
        no-error (0),
        input-overcurrent-fault (1),
        input-overcurrent-warning (2),
        input-overpower-warning (3)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the fault or warning occurring for the input current

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA      UNITS: - "
      ::= { eqptPowerSupplyEntry 12}

   eqptPowerSupplyFaultIout OBJECT-TYPE
      SYNTAX INTEGER
      {
        no-error (0),
        output-overcurrent-fault (1),
        output-overcurrent-warning (2),
        output-undercurrent-warning (3),
        output-undercurrent-fault (4)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the fault or warning occurring for the output current

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA      UNITS: - "
      ::= { eqptPowerSupplyEntry 13}

   eqptPowerSupplyFaultTemperature OBJECT-TYPE
      SYNTAX INTEGER
      {
        no-error (0),
        overtemperature-fault (1),
        overtemperature-warning (2),
        undertemperature-warning (3),
        undertemperature-fault (4)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the fault or warning occurring for the tempertaure

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA      UNITS: - "
      ::= { eqptPowerSupplyEntry 14}

   eqptPowerSupplyFaultCml OBJECT-TYPE
      SYNTAX INTEGER
      {
        no-error (0),
        invalid-or-unsupported-command-received (1),
        invalid-or-unsupported-data-received (2),
        packet-error-check-failed (3),
        memory-fault-detected (4),
        processor-fault-detected (5),
        other-communication-fault (6),
        other-memory-or-logic-fault (7)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report the fault or warning occurring for the tempertaure

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA      UNITS: - "
      ::= { eqptPowerSupplyEntry 15}

   eqptPowerSupplyPresent OBJECT-TYPE
      SYNTAX INTEGER
      {
        yes (0),
        no (1)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report if the power supply is present.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA      UNITS: - "
      ::= { eqptPowerSupplyEntry 16}

   eqptPowerSupplyFaultDetected OBJECT-TYPE
      SYNTAX INTEGER
      {
        no (0),
        yes (1)
      }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "
          Report if a fault has been detected. If yes, then
          eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout,
          eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut,
          eqptPowerSupplyFaultTemperature or eqptPowerSupplyFaultCml
          is reporting an error.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA      UNITS: - "
      ::= { eqptPowerSupplyEntry 17}
   --  ==================================================================
   --  |                 STOP POWER SUPPLY MANAGEMENT TABLE             |
   --  ==================================================================

   eqptPowerSupplyRftc OBJECT IDENTIFIER ::= { asamEquipmentMIB 20 }

   --  ==================================================================
   --  |                 START POWER SUPPLY RFT-C COMMON TABLE          |
   --  ==================================================================

   eqptPowerRftcTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptPowerRftcEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "Equipment RFT-C power table, representing the RFT-C management objects
          This table contains one row per RFT-C module supported on the system.
          In other cases no entry is instantiated.

          ALCATEL NOTE:
             SUPPORT: YES  TABLESIZE: DEP as described above"
      ::= { eqptPowerSupplyRftc 1 }

   eqptPowerRftcEntry OBJECT-TYPE
      SYNTAX EqptPowerRftcEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry of the equipment RFT-C power table.

          ALCATEL NOTE:
          SUPPORT: YES "
      INDEX { eqptPowerRftcId }
      ::= { eqptPowerRftcTable 1 }

   EqptPowerRftcEntry ::= SEQUENCE {
      eqptPowerRftcId                    EqptHolderIndex,
      eqptPowerRftcVCommon               INTEGER,
      eqptPowerRftcICommon               INTEGER,
      eqptPowerRftcTHotspot              INTEGER,
      eqptPowerRftcTAmbient              INTEGER,
      eqptPowerRftcSWVersion             DisplayString,
      eqptPowerRftcHWVersion             DisplayString,
      eqptPowerRftcHWRevision            INTEGER,
      eqptPowerRftcSerialnumber          DisplayString,
      eqptPowerRftcManufacturer          DisplayString,
      eqptPowerRftcLineCount             INTEGER
   }

    eqptPowerRftcId OBJECT-TYPE
      SYNTAX EqptHolderIndex
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Index in equipment Power RFT-C Table.
          This is a number represents the shelf containting the RFT-C module.

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA   RANGE: See above
          PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptPowerRftcEntry 1}

   eqptPowerRftcVCommon OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the common voltage arriving at the power supply in millivolt

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: mV "
      ::= { eqptPowerRftcEntry 2}

   eqptPowerRftcICommon OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the common current arriving at the power supply in milliampere

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: mA "
      ::= { eqptPowerRftcEntry 3}

   eqptPowerRftcTHotspot OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the temperature of the power supplys hotspot in degrees celcius

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: °C"
      ::= { eqptPowerRftcEntry 4}

   eqptPowerRftcTAmbient OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the ambient temperature of the power supply in degrees celcius

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: °C"
      ::= { eqptPowerRftcEntry 5}

   eqptPowerRftcSWVersion OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the software version of the RFT-C power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerRftcEntry 6}

   eqptPowerRftcHWVersion OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the hardware version of the RFT-C power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerRftcEntry 7}

   eqptPowerRftcHWRevision OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report hardware revision of the RFT-C power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerRftcEntry 8}

   eqptPowerRftcSerialnumber OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report serial number of the RFT-C power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerRftcEntry 9}

   eqptPowerRftcManufacturer OBJECT-TYPE
      SYNTAX DisplayString
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the manufacturer code of the RFT-C power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerRftcEntry 10}

   eqptPowerRftcLineCount OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS optional
      DESCRIPTION
         "
          Report the number of lines used on this RFT-C power supply

          ALCATEL NOTE:
          SUPPORT: YES   INSRVMOD: NA     RANGE: See above
          PERSIST: NO    DEFVALUE: NA     UNITS: - "
      ::= { eqptPowerRftcEntry 11}

   --  ==================================================================
   --  |                 STOP POWER SUPPLY RFT-C COMMON TABLE           |
   --  ==================================================================

   --  ==================================================================
   --  |                 START POWER SUPPLY RFT-C LINE TABLE            |
   --  ==================================================================

   eqptPowerRftcLineTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EqptPowerRftcLineEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "

          ALCATEL NOTE:
             SUPPORT: YES   TABLESIZE: DEP as described above"
      ::=  { eqptPowerSupplyRftc 2 }

   eqptPowerRftcLineEntry OBJECT-TYPE
      SYNTAX EqptPowerRftcLineEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
         "An entry in the eqptPowerRftcLineTable.

          ALCATEL NOTE:
             SUPPORT: YES"
      INDEX { eqptPowerRftcId, eqptPowerRftcLineId }
      ::=  { eqptPowerRftcLineTable 1 }

   EqptPowerRftcLineEntry ::= SEQUENCE {
      eqptPowerRftcLineId                INTEGER,
      eqptPowerRftcLineStatus            EqptPowerRftcLineStatus
   }

   eqptPowerRftcLineId OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Report the line number

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptPowerRftcLineEntry 1 }

   eqptPowerRftcLineStatus OBJECT-TYPE
      SYNTAX EqptPowerRftcLineStatus
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "Report the line status.

          ALCATEL NOTE:
             SUPPORT: YES   INSRVMOD: NA   RANGE: See above
             PERSIST: NO    DEFVALUE: NA   UNITS: -"
      ::= { eqptPowerRftcLineEntry 2 }

END