path: root/MIBS/nokia/TIMETRA-OAM-TEST-MIB

TIMETRA-OAM-TEST-MIB DEFINITIONS ::= BEGIN

IMPORTS
    AtmVcIdentifier, AtmVpIdentifier
                                                         FROM ATM-TC-MIB
    Dot1agCfmMepIdOrZero
                                                         FROM IEEE8021-CFM-MIB
    InterfaceIndex, InterfaceIndexOrZero
                                                         FROM IF-MIB
    InetAddress, InetAddressPrefixLength,
    InetAddressType, InetPortNumber
                                                         FROM INET-ADDRESS-MIB
    MplsLabel
                                                         FROM MPLS-LDP-MIB
    RouterID
                                                         FROM OSPF-MIB
    SnmpAdminString
                                                         FROM SNMP-FRAMEWORK-MIB
    MODULE-COMPLIANCE, NOTIFICATION-GROUP,
    OBJECT-GROUP
                                                         FROM SNMPv2-CONF
    Counter32, Counter64, Gauge32,
    Integer32, IpAddress, MODULE-IDENTITY,
    NOTIFICATION-TYPE, OBJECT-TYPE,
    Unsigned32
                                                         FROM SNMPv2-SMI
    DateAndTime, DisplayString, MacAddress,
    RowStatus, StorageType,
    TEXTUAL-CONVENTION, TimeStamp,
    TruthValue
                                                         FROM SNMPv2-TC
    timetraSRMIBModules, tmnxSRConfs,
    tmnxSRNotifyPrefix, tmnxSRObjs
                                                         FROM TIMETRA-GLOBAL-MIB
    SdpBindVcType, SdpId
                                                         FROM TIMETRA-SERV-MIB
    TmnxMobGwId
                                                         FROM TIMETRA-TC-MG-MIB
    Dot1PPriority, IpAddressPrefixLength,
    SdpBindId, ServiceOperStatus, TDSCPName,
    TDSCPNameOrEmpty, TFCName,
    TItemDescription, TLNamedItem,
    TLNamedItemOrEmpty, TNamedItem,
    TNamedItemOrEmpty,
    TPolicyStatementNameOrEmpty, TProfile,
    TmnxActionType, TmnxAdminState,
    TmnxBfdOnLspSessFecType,
    TmnxBgpRouteTarget, TmnxEnabledDisabled,
    TmnxEnabledDisabledAdminState,
    TmnxEncapVal, TmnxHigh32,
    TmnxIgpInstance, TmnxLow32,
    TmnxMplsTpGlobalID, TmnxMplsTpNodeID,
    TmnxPortID, TmnxPwGlobalIdOrZero,
    TmnxServId, TmnxSpokeSdpIdOrZero,
    TmnxStrSapId, TmnxTunnelID,
    TmnxTunnelType,
    TmnxVPNRouteDistinguisher, TmnxVRtrID,
    TmnxVRtrIDOrZero, TmnxVcId,
    TmnxVcIdOrNone
                                                         FROM TIMETRA-TC-MIB
    vRtrID, vRtrIfIndex
                                                         FROM TIMETRA-VRTR-MIB
    ;

timetraOamTestMIBModule          MODULE-IDENTITY
    LAST-UPDATED "201701010000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia SROS Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module to manage and provision most
         Nokia SROS OAM tests and all Nokia SROS Service Assurance Agent (SAA)
         tests.

         Copyright 2003-2018 Nokia.  All rights reserved.
         Reproduction of this document is authorized on the condition that
         the foregoing copyright notice is included.

         This SNMP MIB module (Specification) embodies Nokia's
         proprietary intellectual property.  Nokia retains
         all title and ownership in the Specification, including any
         revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied 'as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "201701010000Z"
    DESCRIPTION
        "Rev 15.0               1 Jan 2017 00:00
         15.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "201601010000Z"
    DESCRIPTION
        "Rev 14.0               1 Jan 2016 00:00
         14.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "201501010000Z"
    DESCRIPTION
        "Rev 13.0               1 Jan 2015 00:00
         13.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "201401010000Z"
    DESCRIPTION
        "Rev 12.0               1 Jan 2014 00:00
         12.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "201102010000Z"
    DESCRIPTION
        "Rev 9.0                1 Feb 2011 00:00
         9.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200902280000Z"
    DESCRIPTION
        "Rev 7.0                28 Feb 2009 00:00
         7.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200801010000Z"
    DESCRIPTION
        "Rev 6.0                01 Jan 2008 00:00
         6.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200701010000Z"
    DESCRIPTION
        "Rev 5.0                01 Jan 2007 00:00
         5.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200603090000Z"
    DESCRIPTION
        "Rev 4.0                09 Mar 2006 00:00
         4.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200508310000Z"
    DESCRIPTION
        "Rev 3.0                31 Aug 2005 00:00
         3.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200501240000Z"
    DESCRIPTION
        "Rev 2.1                24 Jan 2005 00:00
         2.1 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200401150000Z"
    DESCRIPTION
        "Rev 2.0                15 Jan 2004 00:00
         2.0 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200308150000Z"
    DESCRIPTION
        "Rev 1.2                15 Aug 2003 00:00
         1.2 release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200301200000Z"
    DESCRIPTION
        "Rev 1.0                20 Jan 2003 00:00
         1.0 Release of the TIMETRA-OAM-TEST-MIB."

    REVISION    "200111150000Z"
    DESCRIPTION
        "Rev 0.1                15 Nov 2001 00:00
         Initial version of the TIMETRA-OAM-TEST-MIB."

    ::= { timetraSRMIBModules 11 }

TmnxOamBierHistoryReturnCode     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An object of type TmnxOamBierHistoryReturnCode indicates the value
         copied from the Return Code field of a BIER Echo Reply PDU.

         Code points include (but are not restricted to) the following.

         Value    Interpretation
         -----    -------------------------------
          0       No return code
          1       Malformed Echo Request received
          2       One or more of the TLVs was not understood
          3       Replying BFR is the only BFER in header Bitstring
          4       Replying BFR is one of the BFER in header Bitstring
          5       Packet-Forward-Success
          6       Invalid Multipath Info Request
          7       <not defined>
          8       No matching entry in forwarding table.
          9       Set-Identifier Mismatch
         10       DDMAP Mismatch

         Zero is returned if a BIER Echo Reply PDU was not received (e.g. if a
         timeout occurred)."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 3.2, 'Return Code'."
    SYNTAX      Unsigned32 (0..255)

TmnxOamBuildPktHeaderType        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An object of type TmnxOamBuildPktHeaderType specifies the type of a
         packet header used by the OAM Egress Finder.

         Abbreviations
         DOT1Q: IEEE 802.1Q
         GPRS:  General Packet Radio Service
         GRE:   Generic Routing Encapsulation
         GTP:   GPRS Tunneling Protocol
         L2TP:  Layer 2 Tunneling Protocol
         PBB:   Provider Backbone Bridge"
    REFERENCE
        "RFC 2784, 'Generic Routing Encapsulation (GRE)'.
         RFC 4385, 'Pseudowire Emulation Edge-to-Edge (PWE3) Control Word
         for Use over an MPLS PSN'.
         RFC 8200, 'Internet Protocol, Version 6 (IPv6) Specification',
         Section 4, 'Fragment Header'."
    SYNTAX      INTEGER {
        none         (0),
        controlWord  (1),
        dot1q        (2),
        ethernet     (3),
        gre          (4),
        gtpUser      (5),
        ipsecAuth    (6),
        ipv4         (7),
        ipv6         (8),
        ipv6Fragment (9),
        l2tp         (10),
        mpls         (11),
        pbb          (12),
        tcp          (13),
        udp          (14)
    }

TmnxOamLspAssocChannel           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamLspAssocChannel specifies the launched echo
         request's usage of the Associated Channel (ACH) mechanism, when
         testing an MPLS-TP LSP.

         Values:
            notApplicable(1)
                Used when the test is not testing an MPLS-TP LSP.
            nonIp(2)
                Use the Associated Channel mechanism described in RFC 6426,
                Section 3.3.
            none(3)
                Do not use an Associated Channel, as described in RFC 6426,
                Section 3.1.
            ipv4(4)
                Use the Associated Channel mechanism described in RFC 6426,
                Section 3.2."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.1, 'LSP Ping with IP Encapsulation',
         Section 3.2, 'On-Demand CV with IP Encapsulation, over ACH',
         Section 3.3, 'Non-IP-Based On-Demand CV, Using ACH'."
    SYNTAX      INTEGER {
        notApplicable (1),
        nonIp         (2),
        none          (3),
        ipv4          (4)
    }

TmnxOamLspTestSubMode            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamLspTestSubMode specifies the type of LSP ping
         or LSP trace route test to perform.

         LSP test types:
             static(2)
                 Perform an LSP ping or LSP trace route test using the RFC 6426
                 'Target FEC Stack' code point 'Static LSP'.
             bgpLabeledPrefix(3)
                 Perform an LSP ping or LSP trace route test using the RFC 4379
                 'Target FEC Stack' code point 'BGP labeled IPv4 prefix'.  In
                 future, 'bgpLabeledPrefix(3)' will also be used for the RFC
                 4379 'Target FEC Stack' code point 'BGP labeled IPv6 prefix'.
             srIsis(4)
                 Perform an LSP ping or LSP trace route test in the Segment
                 Routing (SR) case, where the Interior Gateway Protocol (IGP)
                 is Intermediate System to Intermediate System (IS-IS).
             srOspf(5)
                 Perform an LSP ping or LSP trace route test in the Segment
                 Routing (SR) case, where the Interior Gateway Protocol (IGP)
                 is Open Shortest Path First (OSPF).
             srTe(6)
                 Perform an LSP ping or LSP trace route test in the Segment
                 Routing Traffic Engineering (SR-TE) case.
             srPolicy(7)
                 Perform an LSP ping or LSP trace route test using a Segment
                 Routing policy.
             srOspf3(8)
                 Perform an LSP ping or LSP trace route test in the SR case,
                 where the IGP is OSPFv3.
             unspecified(1)
                 Perform any other supported type of LSP ping or trace route
                 test.  Examples:  an LSP ping or trace route test using the RFC
                 4379 'Target FEC Stack' code point 'LDP IPv4 prefix'; an LSP
                 ping or trace route test using the RFC 4379 'Target FEC Stack'
                 code point 'RSVP IPv4 LSP'."
    REFERENCE
        "IETF draft-ietf-mpls-spring-lsp-ping-00, 'Label Switched Path (LSP)
         Ping/Trace for Segment Routing Networks Using MPLS Dataplane'.
         RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2 ('Target FEC Stack').
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.3.1 ('Static LSP Sub-TLV').
         IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.1, 'Identification of an SR Policy'."
    SYNTAX      INTEGER {
        unspecified      (1),
        static           (2),
        bgpLabeledPrefix (3),
        srIsis           (4),
        srOspf           (5),
        srTe             (6),
        srPolicy         (7),
        srOspf3          (8)
    }

TmnxOamMplsEchoDownMapTlv        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An object of type TmnxOamMplsEchoDownMapTlv specifies the type of
         downstream mapping TLV in an MPLS echo request PDU.

         'dsmap(1)' specifies the Downstream Mapping TLV, as described in RFC
         4379, Section 3.3.

         'ddmap(2)' specifies the Downstream Detailed Mapping TLV, as described
         in RFC 6424, Section 3.3."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3 ('Downstream Mapping').
         RFC 6424, 'Mechanism for Performing Label Switched Path Ping (LSP Ping)
         over MPLS Tunnels', Section 3.3 ('Downstream Detailed Mapping TLV')."
    SYNTAX      INTEGER {
        dsmap (1),
        ddmap (2)
    }

TmnxOamMplsEchoDownMapTlvOrNone  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An object of type TmnxOamMplsEchoDownMapTlvOrNone specifies the type
         of downstream mapping TLV in an MPLS echo request PDU (or no
         downstream mapping TLV).

         'dsmap(1)' specifies the Downstream Mapping TLV, as described in RFC
         4379, Section 3.3.

         'ddmap(2)' specifies the Downstream Detailed Mapping TLV, as described
         in RFC 6424, Section 3.3.
         'none(3)'  specifies none of the above TLVs."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3 ('Downstream Mapping').
         RFC 6424, 'Mechanism for Performing Label Switched Path Ping (LSP Ping)
         over MPLS Tunnels', Section 3.3 ('Downstream Detailed Mapping TLV')."
    SYNTAX      INTEGER {
        dsmap (1),
        ddmap (2),
        none  (3)
    }

TmnxOamMplsTpPathType            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamMplsTpPathType specifies the type of an MPLS-TP
         path to be tested.

         Path types:
            working(1) - test the primary path of the MPLS-TP LSP
            protect(2) - test the secondary path of the MPLS-TP LSP
            active(3)  - test the currently active path of the MPLS-TP LSP"
    REFERENCE
        "RFC 5921, 'A Framework for MPLS in Transport Networks',
         Section 1.3.4, 'MPLS-TP Label Switched Path'."
    SYNTAX      INTEGER {
        working (1),
        protect (2),
        active  (3)
    }

TmnxOamTestMode                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamTestMode is an enumerated integer that
         indicates the type of OAM test."
    SYNTAX      INTEGER {
        notConfigured (0),
        ping          (1),
        traceroute    (2)
    }

TmnxOamPingRtnCode               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamPingRtnCode is an enumerated integer that
         indicates the return code received in the OAM ping response common
         header.

         Code points:
            notApplicable       The return code has no significance in the
                                context of the test being conducted.
            fecEgress           Replying router is an egress for the Forwarding
                                Equivalence Class (FEC).
            fecNoMap            Replying router has no mapping for the FEC.
            notDownstream       Replying router is not one of the
                                downstream routers.
            downstream          Replying router is one of the downstream
                                routers and its mapping for this FEC on the
                                received interface is the given label.
            downstreamNotLabel  Replying router is one of the downstream
                                routers but its mapping for this FEC is not
                                the given label.
            downstreamNotMac    Replying router is one of the downstream
                                routers but it does not have the given MAC
                                address
            downstreamNotMacFlood   Replying router is one of the downstream
                                routers but it does not have the given MAC
                                address and is unable to flood the request.
            malformedEchoRequest    A malformed echo request was received.
            tlvNotUnderstood    One or more of the TLVs was not understood.
            downstreamNotInMfib Replying router is one of the downstream
                                routers but it does not have an MFIB entry
                                for the given source group combination.
            downstreamMismatched    Downstream mapping mismatched.
            upstreamIfIdUnkn    Upstream interface index unknown.
            noMplsFwd           Label switched but no MPLS forwarding at
                                stack-depth.
            noLabelAtStackDepth No label entry at stack-depth.
            protoIntfMismatched Protocol not associated with interface at
                                FEC stack-depth.
            terminatedByOneLabel    Premature termination of ping due to
                                label stack shrinking to a single label.
            seeDDMapForRetCodeSubCode   See DDMap TLV for rc and sub-rc.
            fecStackChange      Label switched with FEC stack change."
    SYNTAX      INTEGER {
        notApplicable             (0),
        fecEgress                 (1),
        fecNoMap                  (2),
        notDownstream             (3),
        downstream                (4),
        downstreamNotLabel        (5),
        downstreamNotMac          (6),
        downstreamNotMacFlood     (7),
        malformedEchoRequest      (8),
        tlvNotUnderstood          (9),
        downstreamNotInMfib       (10),
        downstreamMismatched      (11),
        upstreamIfIdUnkn          (12),
        noMplsFwd                 (13),
        noLabelAtStackDepth       (14),
        protoIntfMismatched       (15),
        terminatedByOneLabel      (16),
        seeDDMapForRetCodeSubCode (17),
        fecStackChange            (18)
    }

TmnxOamAddressType               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamAddressType is an enumerated integer that
         indicates the type of address used in OAM test requests and responses."
    SYNTAX      INTEGER {
        unknown          (0),
        ipv4Address      (1),
        ipv6Address      (2),
        macAddress       (3),
        sapId            (4),
        sdpId            (5),
        localCpu         (6),
        ipv4Unnumbered   (7),
        ipv6Unnumbered   (8),
        sdpBindId        (9),
        nonIp            (10),
        networkInterface (11)
    }

TmnxOamResponseStatus            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An object of type TmnxOamResponseStatus indicates the status of an OAM
         Echo probe operation.

         responseReceived(1) - Operation completed successfully.
         unknown(2) - Operation failed due to unknown error.
         internalError(3) - An implementation detected an error in its own
            processing that caused an operation to fail.
         maxConcurrentLimitReached(4) - The maximum number of concurrent active
            operations would have been exceeded if the corresponding operation
            was allowed.
         requestTimedOut(5) - Operation failed to receive a valid reply within
            the time limit imposed on it.
         unknownOrigSdpId(6) - Invalid or non-existent originating SDP-ID.
         downOrigSdpId(7) - The originating SDP-ID is operationally down.
         requestTerminated(8) - The OAM ping test was terminated by the manager
            before reply or timeout.
         invalidOriginatorId(9) - The far-end replied with an invalid
            originator-ID error.
         invalidResponderId(10) - The far-end replied with an invalid
            responder-ID error.
         unknownRespSdpId(11) - The far-end replied with an invalid response
            SDP-ID error.
         downRespSdpId(12) - The far-end replied with down (admin or oper)
            response SDP-ID.
         invalidServiceId(13) - Invalid or non-existent originator Service-ID
            (svc-ping).
         invalidSdp(14) - Invalid or non-existent SDP for Service (svc-ping).
         downServiceSdp(15) - SDP for the Service is down.  (svc-ping).
         noServiceEgressLabel(16) - Non-existent Service egress label.
            (svc-ping).
         invalidHostAddress(17) - The IP address for a host has been determined
            to be invalid.  Examples of this are broadcast or multicast
            addresses. (svc-ping).
         invalidMacAddress(18) - The MAC address specified has been determined
            to be invalid. (macPing).
         invalidLspName(19) - The LSP name specified has been determined to be
            invalid. (lspPing).
         macIsLocal(20) - MAC Ping or Trace route not sent because the MAC
            address is on a local SAP or CPU. (MAC-Ping/MAC-TR).
         farEndUnreachable(21) - No route to the far end of the GRE SDP tunnel.
         downOriginatorId(22) - The ping originator is operationally down.
         downResponderId(23) - The ping responder is operationally down.
         changedResponderId(24) - The ping responder-ID is changed.
         downOrigSvcId(25) - Service on the originator side is operationally
            down. (svc-ping).
         downRespSvcId(26) - Service on the responder side is operationally
            down. (svc-ping).
         noServiceIngressLabel(27) - Non-existent service ingress label.
            (svc-ping).
         mismatchCustId(28) - Service customer ID mismatch between originator
            and responder. (svc-ping).
         mismatchSvcType(29) - Service type mismatch between originator and
            responder. (svc-ping).
         mismatchSvcMtu(30) - Service MTU mismatch between originator and
            responder. (svc-ping).
         mismatchSvcLabel(31) - Service label mismatch between originator and
            responder. (svc-ping).
         noSdpBoundToSvc(32) - No SDP bound to the service. (svc-ping).
         downOrigSdpBinding(33) - SDP binding is down on the Originator side.
            (sdp-ping).
         invalidLspPathName(34) - The LSP path name specified is invalid.
            (lsp-ping).
         noLspEndpointAddr(35) - No LSP Endpoint address. (lsp-ping).
         invalidLspId(36) - No active LSP path found. (lsp-ping).
         downLspPath(37) - LSP path is operationally down. (lsp-ping).
         invalidLspProtocol(38) - LSP Protocol is not supported or is invalid.
            (lsp-ping).
         invalidLspLabel(39) - LSP label is invalid. (lsp-ping).
         routeIsLocal(40) - The route is a local route. (vprn-ping).
         noRouteToDest(41) - There is no route to the destination.  (vprn-ping).
         localExtranetRoute(42) - The route is a local extranet route.
            (vprn-ping).
         srcIpInBgpVpnRoute(43) - The source IP belongs to a BGP-VPN route.
            (vprn-ping).
         srcIpInvalid(44) - The source IP is invalid or there is no route to the
            source. (vprn-ping)
         bgpDaemonBusy(45) - The BGP routing daemon is busy; vprn route target
            information is not retrievable. (vprn-trace)
         mcastNotEnabled(46) - Multicast is not enabled. Multicast trace cannot
            be initiated. (mtrace)
         mTraceNoSGFlow(47) - No (*,G)/(S,G) flow on the router. Multicast trace
            cannot be initiated. (mtrace)
         mTraceSysIpNotCfg(48) - System ip address not configured. It is used as
            the response address in the multicast trace query. (mtrace)
         noFwdEntryInMfib(49) - No forwarding entry could be found for the
            specified source and destination address in the MFIB.  (mfib-ping).
         dnsNameNotFound(50) -  The domain name specified in the DNS query does
            not exist.
         noSocket(51) - unable to get socket. (icmp-ping).
         socketOptVprnIdFail(52) - unable to set SO_VPRNID for socket.
            (icmp-ping).
         socketOptIfInexFail(53) -  unable to set IP_IFINDEX for socket.
            (icmp-ping).
         socketOptNextHopFail(54) - unable to set IP_NEXT_HOP for socket.
            (icmp-ping).
         socketOptMtuDiscFail(55) - unable to set IP_MTU_DISC for socket.
            (icmp-ping).
         socketOptSndbufFail(56) - unable to set SO_SNDBUF for socket.
            (icmp-ping).
         socketOptHdrincFail(57) - unable to set IP_HDRINCL for socket.
            (icmp-ping).
         socketOptTosFail(58) - unable to set IP_TOS for socket. (icmp-ping).
         socketOptTtlFail(59) - unable to set IP_TTL for socket. (icmp-ping).
         bindSocketFail(60) - unable to bind socket. (icmp-ping).
         noRouteByIntf(61) - no route to destination via the specified
            interface. (icmp-ping).
         noIntf(62) - no interface specified. (icmp-ping).
         noLocalIp(63) - unable to find local IP address. (icmp-ping).
         sendtoFail(64) - sendto function failed. (icmp-ping).
         rcvdWrongType(65) - received packet of wrong ICMP type. (icmp-ping).
         noDirectInterface(66) - no direct interface to reach destination.
            (icmp-ping).
         nexthopUnreachable (67) - unable to reach the next-hop. (icmp-ping).
         socketOptHwTimeStampFail (68) - unable to set IP_TIM_TIME for socket.
            (icmp-ping).
         noSpokeSdpInVll (69) - unable to find spoke-sdp given sdp-id:vc-id
            (vccv-ping).
         farEndVccvNotSupported (70) - far end does not support the VCCV
            options.  (vccv-ping).
         noVcEgressLabel (71) - no VC egress label to send vccv-ping.
         socketOptIpSessionFail (72) - unable to set IP_SESSION for socket.
            (icmp-ping).
         rcvdWrongSize(73) - received packet of wrong size. (icmp-ping).
         dnsLookupFail (74) - DNS lookup failed. (icmp-ping).
         noIpv6SrcAddrOnIntf (75) - no IPv6 source on the interface (icmp-ping).
         multipathNotSupported (76) - downstream node does not support
            multipath.  (lsp-trace).
         nhIntfNameNotFound (77) - Given next-hop interface name not found.
            (lsp-ping/trace).
         msPwInvalidReplyMode (78) - MS-PW switching node supports ip-routed
            reply mode only (vccv-ping).
         ancpNoAncpString (79) - ANCP string unknown to the system.
         ancpNoSubscriber (80) - subscriber unknown to the system.
         ancpNoAncpStringForSubscriber (81) - subscriber has no associated ANCP
            string.
         ancpNoAccessNodeforAncpString (82) - no access node is found for the
            given ANCP string.
         ancpNoAncpCapabilityNegotiated (83) - ANCP capability not negotiated
            with the involved DSLAM.
         ancpOtherTestInProgress (84) - another ANCP test is running for this
            ANCP string.
         ancpMaxNbrAncpTestsInProgress (85) - max number of concurrent ANCP
            tests reached.
         spokeSdpOperDown (86) - spoke-sdp is operationally down (vccv-ping).
         noMsPwVccvInReplyDir (87) - Switching node in MS-PW with no VCCV
            support in echo reply direction.
         p2mpLspNameOrInstInvalid (88) - P2MP LSP name or instance provided is
            not valid.
         p2mpLspS2LPathDown (89) - LSP path to S2L is down.
         p2mpLspS2LAddressInvalid (90) - One or more S2L address is not valid.
         p2mpLspNotOperational (91) - P2MP LSP is operationally down.
         p2mpLspTrMultipleReplies (92) - Probe returned multiple responses.
            Result may be inconsistent.
         invalidMepId (93) - The user-configured MEP identifier is not valid.
         multipleReplies (94) - more than one reply received, when one was
            expected.
         packetSizeTooBig (95) - The packet is larger than the network's MTU and
            cannot be fragmented. For ICMP-ping tests, this results from an
            ICMPv4 type 3 code 4 or ICMPv6 type 2 message.
         gtpPingError (96) - General GTP Ping Error.
         gtpPingRsrcUnavailable (97) - GTP Path management resource unavailable.
         gtpPingDupRequest (98) - Duplicate request for the same peer.
         gtpPingCleanUpInProg (99) - GTP Path management clean up in progress.
         invalidInterface (100) - The egress interface specified does not exist.
         p2mpLspNotFound (101) - The P2MP-LSP not found given LDP-ID or
            sender address.
         ethCfmSlmInLoss(102) - Synthetic Loss Measurement (SLM) probe lost in
            transit from far-end node to local agent.
         ethCfmSlmOutLoss(103) - SLM probe lost on transmit from local agent to
            far-end node.
         ethCfmSlmUnacknowledged(104) - SLM probe lost but unable to identify
            loss reason.
         spokeSdpFecNoBndFound(105) - Spoke-sdp-fec is invalid or has no
            associated SDP binding yet.
         mtraceNotSupportedP2mp(106) - mtrace not supported in base routing
            context when incoming interface is p2mp
         useFec129Parameters(107) - specify FEC129 parameters for FEC129 PW
            instead of sdp-id:vc-id
         dnsServerUnexpectedResponse(108) - nameserver unexpected response.
         dnsServerResponseFormErr(109) - nameserver responded with FORMERR.
         dnsServerResponseServFail(110) - nameserver responded with SERVFAIL.
         dnsServerResponseNotImp(111) - nameserver responded with NOTIMP.
         dnsServerResponseRefused(112) - nameserver responded with REFUSED.
         sendFailUndefinedServiceId(113) - The OAM test cannot be performed
            because the associated service does not exist.
         sendFailWrongServiceType(114) - The OAM test cannot be performed
            because the associated service is of the wrong type.
         sendFailSubnettedService(115) - The OAM test cannot be performed
            on a service with a specified MAC subnet length.
         invalidRespServiceId(116) - Invalid or non-existent responder
            Service-ID.
         adminDownOrigSdpBind(117) - SDP binding is administratively down on the
            originator side.
         operDownRespSdpBind(118) - SDP binding is operationally down on the
            responder side.
         adminDownRespSdpBind(119) - SDP binding is administratively down on the
            responder side.
         sdpBindVcidMismatch(120) - SDP binding VC ID mismatch between
            originator and responder.
         sdpBindTypeMismatch(121) - SDP binding type mismatch between originator
            and responder.
         sdpBindVcTypeMismatch(122) - SDP binding VC type mismatch between
            originator and responder.
         sdpBindVlanVcTagMismatch(123) - SDP binding VLAN VC tag mismatch
            between originator and responder.
         adminDownOrigSvc(124) - Service on the originator side is
            administratively down.
         adminDownRespSvc(125) - Service on the responder side is
            administratively down.
         adminDownOrigSdpId(126) - The originating SDP-ID is administratively
            down.
         adminDownRespSdpId(127) - The responding SDP-ID is administratively
            down.
         mTraceSourceIsNotRemote(128) - The multicast trace route test cannot be
            performed because the source address is not remote.
         invalidVirtualRouterId(129) - The OAM test cannot be performed because
            the associated virtual router ID is invalid.
         ldpPrefixIsLocal(130) - The OAM test cannot be performed because the
            associated LDP prefix is local to the system.
         sourceIpIsNotLocal(131) - The OAM test cannot be performed because the
            associated source address is not local to the system.
         nextHopIpIsLocal(132) - The OAM test cannot be performed because the
            associated next hop address is local to the system.
         targetIpIsLocal(133) - The OAM test cannot be performed because the
            associated target address is local to the system.
         invalidControlPlaneOption(134) - The OAM test cannot be performed
            because the control plane send or receive option is not allowed
            with the specified service.
         iomRevisionNotSupported(135) - The OAM test cannot be performed due
            to a mismatch in supported revision with the provisioned IOMs.
         invalidSourceMacOption(136) - The OAM test cannot be performed because
            the source MAC option is not allowed with the specified service.
         sendFailSpbMgdService(137) - The OAM test cannot be performed on a
            service which is managed by SPB.
         useStaticPwParameters(138) - The spoke SDP is configured for static PW.
         type1Fec129PwNotSupported(139) - The OAM test is not supported on
            type 1 FEC129 pseudowires.
         mplsTpLspPathNotOperational(140) - The OAM test cannot be performed
            because the MPLS-TP LSP path is not operational.
         invalidStaticMplsTpLsp(141)- The OAM test only supports static MPLS-TP
            LSPs.
         controlWordNotValid(142) - The control word for the spoke-sdp is not
            valid for this OAM test.
         pwPathIdNotConfigured(143) - The pw-path-id provisioning is not
            complete.
         notSupportedOnVcSwitchService(144) - The OAM test is not supported on a
            vc-switching service.
         sdpFarEndNotSupported(145) - The OAM test does not support the SDP far
            end value.
         mplsTpLspPathShutdown(146) - The MPLS-TP path is currently shutdown.
         forceOptionIsBlocked(147) - The force option is currently blocked
            because of the configuration of a related entity.
         intfForLspPathIsNotOperational(148) - The interface for the LSP path is
            not operational
         ttlExpired(149) - The destination could not be reached because the
            time-to-live (IPv4) or hop limit (IPv6) was too small. This
            results from an ICMPv4 type 11 code 0 or ICMPv6 type 3 code 0
            message.
         networkUnreachable(150) - The network specified by the destination
            address is unreachable. This results from an ICMPv4 type 3 code 0
            or ICMPv6 type 1 code 0 message.
         hostUnreachable(151) - The host specified by the destination address is
            unreachable. This results from an ICMPv4 type 3 code 1 or ICMPv6
            type 1 code 3 message.
         bgpLabelPrefixIsLocal(152) - The OAM test cannot be performed because
            the associated BGP Label Route prefix is local to the system.
         bgpLabelPrefixUnknown(153) - The OAM test cannot be performed because
            the BGP Target FEC prefix entry is not found in the Routing Table.
         ldpPrefixUnknown(154) - The OAM test cannot be performed because the
            LDP Target FEC prefix entry is not found in the Routing Table.
         l2tpv3DeliveryTypeUnsupported(155) - The OAM test cannot be performed
            because the l2TPv3 delivery type is unsupported.
         vPingPeerCvNoLspPing(156) - The OAM test cannot be performed because
            the peer CV bits do not support lsp ping.
         vPingPeerCcNoCtrlWord(157) - The OAM test cannot be performed because
            the peer CC bits do not support control word.
         sendFailEvpnCfgdService(158) - The OAM test cannot be performed on a
            VPLS service that has EVPN configured.
         sendFailed(159) - The OAM test cannot send the test packet.
         minimumPacketSizeNotMet(160) - The OAM test cannot send the test packet
            as the minimum required packet size exceeds the user supplied packet
            size.
         invalidTargetFecType(161) - The OAM test does not support this FEC
            type.
         p2mpLspPingNotSupportedOnMgmtRtr(162) - The OAM p2mpLspPing test is not
            supported on the management router.
         ipv4SdpFarEndsOnly(163) - The OAM test only supports bindings and SDPs
            using an IPv4 far end.
         vxlanEgrBndSvcMismatch(164) - The OAM test cannot send packets to a
            VXLAN egress binding not owned by the same service as the one
            sending.
         vxlanNoMatchingTep(165) - The OAM test can only send to VTEPs that have
            been configured.
         vxlanEvpnUnconfigured(166) - The OAM test can only send on a service
            with EVPN configured.
         ipv6SdpFarEndsNotSupported(167) - The OAM test does not support
            bindings and SDPs using an IPv6 far end.
         oamTestOverSRTunNotSupported(168) - The OAM test is not supported on SR
            tunnels.
         sendFailEvpnCfgdPbbService(169) - The OAM test cannot be performed on a
            VPLS/Epipe service that is associated with a b-vpls that has EVPN
            configured.
         txPortDown(170) - The transmit port is operationally down.
         noTxPort(171) - No transmit port.
         parentAdminDown(172) - The parent (SPOKE, SAP, service or port) of the
            MEP is administratively down.
         destMacResolveFail(173) - Unable to resolve the remote-mepid to a
            unicast layer2 MAC address.
         vxlanIpV6TermUnsupported(174) - The OAM test does not support IPv6
            tunnel termination points.
         ipPrefixIsLocal(175) - The OAM test cannot be performed because
            the associated IP prefix is local to the system.
         ipPrefixUnknown(176) - The OAM test cannot be performed because the
            Target FEC prefix entry is not found in the Routing Table.
         greEthBrdgdDelvryTypeUnsupported(177) - The OAM test cannot be
            performed because the GRE Ethernet Bridged delivery type is
            unsupported.
         mtrace2Disabled(178) - The mtrace2 test cannot be performed because
            mtrace2 is disabled at the system level.
         ipv6TunneledNextHopUnsupported(179) - The VPRN ping/trace test has
            no support for IPv6 tunneled next hops.
         srTunneledNextHopUnsupported(180) - The VPRN ping/trace test has no
            support for Segment Routing tunneled next hops.
         srTeTunneledNextHopUnsupported(181) - The VPRN ping/trace test has
            no support for Segment Routing Traffic Engineering next hops.
         nextHopIpIsSubnet(182) - The OAM test cannot be performed because the
            associated next hop address is a subnet.
         ipDestAndNextHopComboUnsupported(183) - The IP destination address
            type and provided next hop type is not a supported combination.
         resolvedIpDstSrcComboUnsupported(184) - The resolved IP destination
            address type and provided source address type is not a supported
            combination.
         srPolicyNotFound(185) - The SR-POLICY not found given color and
            endpoint.
         srPolicySegmentListNotFound(186) - The SR-POLICY's segment list not
            found given segment list Id.
         ethCfmUnsupportedTestType(187) - The test type is not valid for the
             MEP.
         ipPrefixInvalid(188) - The OAM test cannot be performed because the
            Target FEC prefix entry is not valid for the test.
         bierError (189) - The BIER OAM test received a reply with an
            unsuccessful return code.
         pathDestAddrTypeMismatch(190) - The path destination address type
            doesn't match the prefix address type.
         srcAddrTypeMismatch(191) - The source address type doesn't match
            the prefix address type.
         nhAddrTypeMismatch(192) - The next hop address type doesn't match
            the prefix address type.
         invalidRouterInstance(193) - a probe cannot be sent because the
            test's router-instance is invalid.
         mtrace2OperDown(194) - An mtrace2 probe cannot be sent because
            mtrace2 is operationally down at the system level."
    SYNTAX      INTEGER {
        responseReceived                 (1),
        unknown                          (2),
        internalError                    (3),
        maxConcurrentLimitReached        (4),
        requestTimedOut                  (5),
        unknownOrigSdpId                 (6),
        downOrigSdpId                    (7),
        requestTerminated                (8),
        invalidOriginatorId              (9),
        invalidResponderId               (10),
        unknownRespSdpId                 (11),
        downRespSdpId                    (12),
        invalidServiceId                 (13),
        invalidSdp                       (14),
        downServiceSdp                   (15),
        noServiceEgressLabel             (16),
        invalidHostAddress               (17),
        invalidMacAddress                (18),
        invalidLspName                   (19),
        macIsLocal                       (20),
        farEndUnreachable                (21),
        downOriginatorId                 (22),
        downResponderId                  (23),
        changedResponderId               (24),
        downOrigSvcId                    (25),
        downRespSvcId                    (26),
        noServiceIngressLabel            (27),
        mismatchCustId                   (28),
        mismatchSvcType                  (29),
        mismatchSvcMtu                   (30),
        mismatchSvcLabel                 (31),
        noSdpBoundToSvc                  (32),
        downOrigSdpBinding               (33),
        invalidLspPathName               (34),
        noLspEndpointAddr                (35),
        invalidLspId                     (36),
        downLspPath                      (37),
        invalidLspProtocol               (38),
        invalidLspLabel                  (39),
        routeIsLocal                     (40),
        noRouteToDest                    (41),
        localExtranetRoute               (42),
        srcIpInBgpVpnRoute               (43),
        srcIpInvalid                     (44),
        bgpDaemonBusy                    (45),
        mcastNotEnabled                  (46),
        mTraceNoSGFlow                   (47),
        mTraceSysIpNotCfg                (48),
        noFwdEntryInMfib                 (49),
        dnsNameNotFound                  (50),
        noSocket                         (51),
        socketOptVprnIdFail              (52),
        socketOptIfInexFail              (53),
        socketOptNextHopFail             (54),
        socketOptMtuDiscFail             (55),
        socketOptSndbufFail              (56),
        socketOptHdrincFail              (57),
        socketOptTosFail                 (58),
        socketOptTtlFail                 (59),
        bindSocketFail                   (60),
        noRouteByIntf                    (61),
        noIntf                           (62),
        noLocalIp                        (63),
        sendtoFail                       (64),
        rcvdWrongType                    (65),
        noDirectInterface                (66),
        nexthopUnreachable               (67),
        socketOptHwTimeStampFail         (68),
        noSpokeSdpInVll                  (69),
        farEndVccvNotSupported           (70),
        noVcEgressLabel                  (71),
        socketOptIpSessionFail           (72),
        rcvdWrongSize                    (73),
        dnsLookupFail                    (74),
        noIpv6SrcAddrOnIntf              (75),
        multipathNotSupported            (76),
        nhIntfNameNotFound               (77),
        msPwInvalidReplyMode             (78),
        ancpNoAncpString                 (79),
        ancpNoSubscriber                 (80),
        ancpNoAncpStringForSubscriber    (81),
        ancpNoAccessNodeforAncpString    (82),
        ancpNoAncpCapabilityNegotiated   (83),
        ancpOtherTestInProgress          (84),
        ancpMaxNbrAncpTestsInProgress    (85),
        spokeSdpOperDown                 (86),
        noMsPwVccvInReplyDir             (87),
        p2mpLspNameOrInstInvalid         (88),
        p2mpLspS2LPathDown               (89),
        p2mpLspS2LAddressInvalid         (90),
        p2mpLspNotOperational            (91),
        p2mpLspTrMultipleReplies         (92),
        invalidMepId                     (93),
        multipleReplies                  (94),
        packetSizeTooBig                 (95),
        gtpPingError                     (96),
        gtpPingRsrcUnavailable           (97),
        gtpPingDupRequest                (98),
        gtpPingCleanUpInProg             (99),
        invalidInterface                 (100),
        p2mpLspNotFound                  (101),
        ethCfmSlmInLoss                  (102),
        ethCfmSlmOutLoss                 (103),
        ethCfmSlmUnacknowledged          (104),
        spokeSdpFecNoBndFound            (105),
        mtraceNotSupportedP2mp           (106),
        useFec129Parameters              (107),
        dnsServerUnexpectedResponse      (108),
        dnsServerResponseFormErr         (109),
        dnsServerResponseServFail        (110),
        dnsServerResponseNotImp          (111),
        dnsServerResponseRefused         (112),
        sendFailUndefinedServiceId       (113),
        sendFailWrongServiceType         (114),
        sendFailSubnettedService         (115),
        invalidRespServiceId             (116),
        adminDownOrigSdpBind             (117),
        operDownRespSdpBind              (118),
        adminDownRespSdpBind             (119),
        sdpBindVcidMismatch              (120),
        sdpBindTypeMismatch              (121),
        sdpBindVcTypeMismatch            (122),
        sdpBindVlanVcTagMismatch         (123),
        adminDownOrigSvc                 (124),
        adminDownRespSvc                 (125),
        adminDownOrigSdpId               (126),
        adminDownRespSdpId               (127),
        mTraceSourceIsNotRemote          (128),
        invalidVirtualRouterId           (129),
        ldpPrefixIsLocal                 (130),
        sourceIpIsNotLocal               (131),
        nextHopIpIsLocal                 (132),
        targetIpIsLocal                  (133),
        invalidControlPlaneOption        (134),
        iomRevisionNotSupported          (135),
        invalidSourceMacOption           (136),
        sendFailSpbMgdService            (137),
        useStaticPwParameters            (138),
        type1Fec129PwNotSupported        (139),
        mplsTpLspPathNotOperational      (140),
        invalidStaticMplsTpLsp           (141),
        controlWordNotValid              (142),
        pwPathIdNotConfigured            (143),
        notSupportedOnVcSwitchService    (144),
        sdpFarEndNotSupported            (145),
        mplsTpLspPathShutdown            (146),
        forceOptionIsBlocked             (147),
        intfForLspPathIsNotOperational   (148),
        ttlExpired                       (149),
        networkUnreachable               (150),
        hostUnreachable                  (151),
        bgpLabelPrefixIsLocal            (152),
        bgpLabelPrefixUnknown            (153),
        ldpPrefixUnknown                 (154),
        l2tpv3DeliveryTypeUnsupported    (155),
        vPingPeerCvNoLspPing             (156),
        vPingPeerCcNoCtrlWord            (157),
        sendFailEvpnCfgdService          (158),
        sendFailed                       (159),
        minimumPacketSizeNotMet          (160),
        invalidTargetFecType             (161),
        p2mpLspPingNotSupportedOnMgmtRtr (162),
        ipv4SdpFarEndsOnly               (163),
        vxlanEgrBndSvcMismatch           (164),
        vxlanNoMatchingTep               (165),
        vxlanEvpnUnconfigured            (166),
        ipv6SdpFarEndsNotSupported       (167),
        oamTestOverSRTunNotSupported     (168),
        sendFailEvpnCfgdPbbService       (169),
        txPortDown                       (170),
        noTxPort                         (171),
        parentAdminDown                  (172),
        destMacResolveFail               (173),
        vxlanIpV6TermUnsupported         (174),
        ipPrefixIsLocal                  (175),
        ipPrefixUnknown                  (176),
        greEthBrdgdDelvryTypeUnsupported (177),
        mtrace2Disabled                  (178),
        ipv6TunneledNextHopUnsupported   (179),
        srTunneledNextHopUnsupported     (180),
        srTeTunneledNextHopUnsupported   (181),
        nextHopIpIsSubnet                (182),
        ipDestAndNextHopComboUnsupported (183),
        resolvedIpDstSrcComboUnsupported (184),
        srPolicyNotFound                 (185),
        srPolicySegmentListNotFound      (186),
        ethCfmUnsupportedTestType        (187),
        ipPrefixInvalid                  (188),
        bierError                        (189),
        pathDestAddrTypeMismatch         (190),
        srcAddrTypeMismatch              (191),
        nhAddrTypeMismatch               (192),
        invalidRouterInstance            (193),
        mtrace2OperDown                  (194)
    }

TmnxOamSignalProtocol            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamSignalProtocol indicates the type of label
         signaling protocol used by a router in a specific Layer 2 mapping
         entry.

         Code Points
         unknown - protocol is unknown
         static  - statically configured Label Switched Path (LSP)
         bgp     - Border Gateway Protocol
         ldp     - Label Distribution Protocol
         rsvpTe  - Resource Reservation Protocol, Traffic Engineering
         ospf    - Open Shortest Path First
         isis    - Intermediate System to Intermediate System
         ospf3   - Open Shortest Path First version 3"
    REFERENCE
        "IETF draft-kumarkini-mpls-spring-lsp-ping, 'Label Switched Path (LSP)
         Ping/Trace for Segment Routing Networks Using MPLS Dataplane', v02,
         1-Dec-2016, Section 6, 'Extension to Downstream Detailed Mapping TLV'."
    SYNTAX      INTEGER {
        unknown (0),
        static  (1),
        bgp     (2),
        ldp     (3),
        rsvpTe  (4),
        ospf    (5),
        isis    (6),
        ospf3   (7)
    }

TmnxOamTestResponsePlane         ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamTestResponsePlane is an enumerated integer that
         indicates the response plane from which the OAM ping or traceroute
         response was received."
    SYNTAX      INTEGER {
        controlPlane (1),
        dataPlane    (2),
        none         (3)
    }

TmnxOamSaaThreshold              ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamSaaThreshold is a enumerated integer that
         indicates which type of thresholds should be monitored upon completion
         of an OAM ping test run. When the corresponding threshold is crossed,
         a tmnxOamSaaThreshold notification will be generated.

         noThreshold(0) No threshold type is configured.
         inJitter   (1) Monitor the value of jitter calculated for the
                        inbound, one-way, OAM ping responses received
                        for an OAM ping test run.
         outJitter  (2) Monitor the value of jitter calculated for the
                        outbound, one-way, OAM ping requests sent for an
                        OAM ping test run.
         rtJitter   (3) Monitor the value of jitter calculated for the
                        round trip, two-way, OAM ping requests and replies
                        for an OAM ping test run.
         inLoss     (4) Monitor the number of inbound OAM ping responses not
                        received for an OAM ping test run.
         outLoss    (5) Monitor the number of outbound OAM ping requests that
                        could not be sent for an OAM ping test run.
         rtLoss     (6) Monitor the amount of packet loss for a round trip
                        OAM ping test run.
         inLatency  (7) Monitor the average amount of latency of inbound
                        OAM ping responses for an OAM ping test run.
         outLatency (8) Monitor the average amount of latency of outbound
                        OAM ping requests for an OAM ping test run.
         rtLatency  (9) Monitor the average amount of round trip latency
                        for an OAM ping test run."
    SYNTAX      INTEGER {
        noThreshold (0),
        inJitter    (1),
        outJitter   (2),
        rtJitter    (3),
        inLoss      (4),
        outLoss     (5),
        rtLoss      (6),
        inLatency   (7),
        outLatency  (8),
        rtLatency   (9)
    }

TmnxOamVccvAssocChannel          ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamVccvAssocChannel specifies the launched echo
         request's usage of the Associated Channel (ACH) mechanism, when
         performing an MPLS-TP VCCV test.

         Values:
            notApplicable(1)
                Used when the test is not an MPLS-TP VCCV test.
            nonIp(2)
                Use the Associated Channel mechanism described in RFC 6426,
                Section 3.3.
            ipv4(3)
                Use the Associated Channel mechanism described in RFC 6426,
                Section 3.2."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.2, 'On-Demand CV with IP Encapsulation, over ACH',
         Section 3.3, 'Non-IP-Based On-Demand CV, Using ACH'."
    SYNTAX      INTEGER {
        notApplicable (1),
        nonIp         (2),
        ipv4          (3)
    }

TmnxOamVccvTestSubMode           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamVccvTestSubMode specifies the type of VCCV ping
         or VCCV trace route test to perform.

         VCCV test types:
             static(2)
                 Perform a VCCV ping or VCCV trace route test using the RFC
                 6426 'Target FEC Stack' code point 'Static Pseudowire'.
             unspecified(1)
                 Perform any other supported type of VCCV ping or trace route
                 test.  Examples:  a VCCV ping or VCCV trace route test using
                 the RFC 4379 'Target FEC Stack' code point 'FEC 128
                 Pseudowire'; a VCCV ping or VCCV trace route test using the RFC
                 4379 'Target FEC Stack' code point 'FEC 129 Pseudowire'."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2 ('Target FEC Stack').
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.3.2 ('Static Pseudowire Sub-TLV')."
    SYNTAX      INTEGER {
        unspecified (1),
        static      (2)
    }

TmnxOamVccvSwitTgtFecType        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An object of type TmnxOamVccvSwitTgtFecType specifies the type of
         downstream FEC (Forward Equivalence Class) segment to be tested during
         a VCCV ping or trace route test.  The path to be tested starts with a
         FEC segment, and switches to a FEC segment with the specified
         (different) type.

         Values:
             none(1)
                 The path to be tested does not switch FEC types.
             fec128(2)
                 Switch to a segment with FEC type 'FEC 128 Pseudowire'.
             static(3)
                 Switch to a segment with FEC type 'Static Pseudowire'."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)').
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.3.2 ('Static Pseudowire Sub-TLV')."
    SYNTAX      INTEGER {
        none   (1),
        fec128 (2),
        static (3)
    }

TmnxOamVcType                    ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An object of type TmnxOamVcType indicates the type of SDP binding
         associated with a Virtual Circuit (VC)."
    SYNTAX      INTEGER {
        meshSdp  (5),
        spokeSdp (11)
    }

TmnxOamLTtraceDisStatusBits      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamLTtraceDisStatusBits indicates the status of an
         LDP tree trace discovery.

         Code points:
            timeout (0)        - one or more trace requests for an IP address
                                 FEC timed out
            maxPath (1)        - reached the maximum allowed path limit for an
                                 IP address FEC
            maxHop (2)         - reached the maximum allowed hop limit
            unexploredPath (3) - could not discover all possible paths
            noResource (4)     - the internal resources required to complete the
                                 discovery were unavailable"
    SYNTAX      BITS {
        timeout        (0),
        maxPath        (1),
        maxHop         (2),
        unexploredPath (3),
        noResource     (4)
    }

TmnxOamTestResult                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value of type TmnxOamTestResult is an enumerated integer that
         describes the result of a ping or trace test run.
         Code points:
             undetermined      (0) The result is, as yet, unknown.
             success           (1) The test was successful.
             failed            (2) The test failed.
             aborted           (3) The test was terminated before completion.
             txResourcesUnavail(4) The test did not start because transmit
                                   resources are unavailable."
    SYNTAX      INTEGER {
        undetermined       (0),
        success            (1),
        failed             (2),
        aborted            (3),
        txResourcesUnavail (4)
    }

tmnxOamTestObjs                  OBJECT IDENTIFIER ::= { tmnxSRObjs 11 }

tmnxOamPingObjs                  OBJECT IDENTIFIER ::= { tmnxOamTestObjs 1 }

tmnxOamPingNotificationObjects   OBJECT IDENTIFIER ::= { tmnxOamPingObjs 1 }

tmnxOamPingMaxConcurrentTests    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "tests"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum number of concurrent active OAM ping tests
         that are allowed within an agent implementation.  A value of
         zero (0) for this object implies that there is no limit for
         the number of concurrent active tests in effect."
    DEFVAL      { 0 }
    ::= { tmnxOamPingObjs 2 }

tmnxOamPingCtlTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamPingCtlTable contains configuration and status information for
         ping tests.

         tmnxOamDiagCtlTable and tmnxOamTrCtlTable fill the same role for
         diagnostic tests and trace route tests, respectively."
    ::= { tmnxOamPingObjs 3 }

tmnxOamPingCtlEntry              OBJECT-TYPE
    SYNTAX      TmnxOamPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamPingCtlEntry contains configuration and status information for
         one ping test.

         Rows are created/destroyed using tmnxOamPingCtlRowStatus.

         The test's test type (e.g. 'icmpPing(15)') is configured using
         tmnxOamPingCtlTestMode.  Depending on the test type, configuration
         specific to the test type may reside in a child table (e.g.
         tmnxOamIcmpPingCtlTable, tmnxOamLspPingCtlTable).

         Test results reside in the tables listed in the tmnxOamPingCtlTestMode
         DESCRIPTION clause."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamPingCtlTable 1 }

TmnxOamPingCtlEntry              ::= SEQUENCE
{
    tmnxOamPingCtlOwnerIndex         SnmpAdminString,
    tmnxOamPingCtlTestIndex          SnmpAdminString,
    tmnxOamPingCtlRowStatus          RowStatus,
    tmnxOamPingCtlStorageType        StorageType,
    tmnxOamPingCtlDescr              SnmpAdminString,
    tmnxOamPingCtlTestMode           INTEGER,
    tmnxOamPingCtlAdminStatus        TmnxEnabledDisabledAdminState,
    tmnxOamPingCtlOrigSdpId          SdpId,
    tmnxOamPingCtlRespSdpId          SdpId,
    tmnxOamPingCtlFcName             TFCName,
    tmnxOamPingCtlProfile            TProfile,
    tmnxOamPingCtlMtuStartSize       Unsigned32,
    tmnxOamPingCtlMtuEndSize         Unsigned32,
    tmnxOamPingCtlMtuStepSize        Unsigned32,
    tmnxOamPingCtlTargetIpAddress    IpAddress,
    tmnxOamPingCtlServiceId          TmnxServId,
    tmnxOamPingCtlLocalSdp           TruthValue,
    tmnxOamPingCtlRemoteSdp          TruthValue,
    tmnxOamPingCtlSize               Unsigned32,
    tmnxOamPingCtlTimeOut            Unsigned32,
    tmnxOamPingCtlProbeCount         Unsigned32,
    tmnxOamPingCtlInterval           Unsigned32,
    tmnxOamPingCtlMaxRows            Unsigned32,
    tmnxOamPingCtlTrapGeneration     BITS,
    tmnxOamPingCtlTrapProbeFailureFilter Unsigned32,
    tmnxOamPingCtlTrapTestFailureFilter Unsigned32,
    tmnxOamPingCtlSAA                TruthValue,
    tmnxOamPingCtlRuns               Counter32,
    tmnxOamPingCtlFailures           Counter32,
    tmnxOamPingCtlLastRunResult      TmnxOamTestResult,
    tmnxOamPingCtlLastChanged        TimeStamp,
    tmnxOamPingCtlVRtrID             TmnxVRtrIDOrZero,
    tmnxOamPingCtlTgtAddrType        InetAddressType,
    tmnxOamPingCtlTgtAddress         InetAddress,
    tmnxOamPingCtlSrcAddrType        InetAddressType,
    tmnxOamPingCtlSrcAddress         InetAddress,
    tmnxOamPingCtlDnsName            OCTET STRING,
    tmnxOamPingCtlDNSRecord          INTEGER,
    tmnxOamPingCtlIntervalUnits      INTEGER,
    tmnxOamPingCtlSubscriberName     TLNamedItemOrEmpty,
    tmnxOamPingCtlRouterInstanceName TLNamedItemOrEmpty
}

tmnxOamPingCtlOwnerIndex         OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlOwnerIndex specifies the owner name of the
         test."
    ::= { tmnxOamPingCtlEntry 1 }

tmnxOamPingCtlTestIndex          OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTestIndex specifies the test name of the
         test.

         The test is identified by the owner name and the test name.  One owner
         typically owns several tests.  This indexing method ensures tests
         created by several owners have unique indices."
    ::= { tmnxOamPingCtlEntry 2 }

tmnxOamPingCtlRowStatus          OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlRowStatus specifies the status of the row
         for the specified ping test.

         Deleting a row deletes all the child rows with the same owner name and
         test name, including additional configuration rows (e.g.
         tmnxOamIcmpPingCtlEntry), and rows containing test results (e.g.
         tmnxOamVxlanPingHistoryEntry)."
    ::= { tmnxOamPingCtlEntry 3 }

tmnxOamPingCtlStorageType        OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 14.0 R1.  There is no
         replacement object."
    DEFVAL      { volatile }
    ::= { tmnxOamPingCtlEntry 4 }

tmnxOamPingCtlDescr              OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 14.0 R1.  There is no
         replacement object."
    DEFVAL      { ''H }
    ::= { tmnxOamPingCtlEntry 5 }

tmnxOamPingCtlTestMode           OBJECT-TYPE
    SYNTAX      INTEGER {
        none              (0),
        sdpPing           (1),
        mtuPing           (2),
        svcPing           (3),
        macPing           (5),
        macPopulate       (6),
        macPurge          (7),
        lspPing           (8),
        vprnPing          (9),
        atmPing           (10),
        mfibPing          (11),
        cpePing           (12),
        mrInfo            (13),
        vccvPing          (14),
        icmpPing          (15),
        dnsPing           (16),
        ancpLoopback      (17),
        p2mpLspPing       (18),
        ethCfmLoopback    (19),
        ethCfmTwoWayDelay (20),
        gtpPing           (21),
        ethCfmTwoWaySlm   (22),
        vxlanPing         (23),
        bierPing          (25)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTestMode specifies the type of OAM ping
         test defined by this row.

         none     - the test type is unspecified.

         sdpPing  - tests SDP connectivity and round trip time.

         mtuPing  - tests MTU path size.

         svcPing  - determines the existence and operational state of the
                    service ID on the far end ESR.

         macPing  - determines address mappings for the service ID.

         macPopulate - populates an OAM MAC address into the FIBs.

         macPurge - deletes an OAM MAC address from the FIBs.

         lspPing  - tests Label Switched Path (LSP) path connectivity and round
                    trip time.

         vprnPing - tests IP path connectivity and round trip time within a
                    specified VPRN service.

         atmPing  - tests ATM path connectivity and round trip time on an ATM
                    VCC.

         mfibPing - tests IP multicast connectivity and round trip time within a
                    specified VPLS service.

         cpePing  - determines IP connectivity to a CPE within a specified VPLS
                    service.

         mrInfo   - get a multicast router's capabilities and the list of
                    interfaces with neighbors.

         vccvPing - Virtual Circuit Connectivity Verification, testing
                    pseudowire connectivity and round trip time.

         icmpPing - tests IP connectivity and round trip time.

         dnsPing  - tests DNS name resolution connectivity and round trip time.

         ancpLoopback - send an OAM loopback test request to the access node.

         p2mpLspPing - tests P2MP LSP path connectivity and round trip time.

         ethCfmLoopback - performs Ethernet Connectivity Fault Management (CFM)
                    loopback tests.  This MIB supports the SAA form of this
                    test only (the OAM form uses a separate set of objects - see
                    IEEE8021-CFM-MIB).

         ethCfmTwoWayDelay - performs Ethernet Connectivity Fault Management
                    (CFM) two way delay tests.  This MIB supports the SAA form
                    of this test only (the OAM form uses a separate set of
                    objects - see IEEE8021-CFM-MIB).

         gtpPing  - tests GTP (GPRS Tunnelling Protocol) path connectivity.

         ethCfmTwoWaySlm - performs Ethernet Connectivity Fault Management
                    (CFM) two way Synthetic Loss Measurement (SLM) tests. This
                    MIB supports the SAA form of this test only (the OAM form
                    uses a separate set of objects - see
                    TIMETRA-IEEE8021-CFM-MIB).

         vxlanPing - tests Virtual Extensible Local Area Network (VXLAN)
                    connectivity, checks the status of configured VXLAN Network
                    IDs (VNIs), and allows validation of connected end systems.

         bierPing - performs a Bit Index Explicit Replication (BIER)
                    multicast connectivity test.

         When tmnxOamPingCtlTestMode is set, SROS may automatically create a
         same-INDEX row in a table used to configure objects specific to the
         test type (as shown in the following table).

         tmnxOamPingCtlTestMode   Auto-Gen Row for Additional Configuration
         ----------------------   -----------------------------------------
         'ancpLoopback'           tmnxOamAncpTestCtlTable
         'atmPing'                tmnxOamAtmPingCtlTable
         'bierPing'               tmnxOamBierPingCtlTable
         'cpePing'                tmnxOamCpePingCtlTable
         'dnsPing'                none
         'ethCfmLoopback'         tmnxOamEthCfmPingCtlTable
         'ethCfmTwoWayDelay'      tmnxOamEthCfmPingCtlTable
         'ethCfmTwoWaySlm'        tmnxOamEthCfmPingCtlTable
         'gtpPing'                tmnxOamMobGtpPingCtlTable
         'icmpPing'               tmnxOamIcmpPingCtlTable
         'lspPing'                tmnxOamLspPingCtlTable
         'macPing'                tmnxOamMacPingCtlTable
         'macPopulate'            tmnxOamMacPingCtlTable
         'macPurge'               tmnxOamMacPingCtlTable
         'mfibPing'               tmnxOamMfibPingCtlTable
         'mrInfo'                 none
         'mtuPing'                none
         'p2mpLspPing'            tmnxOamP2mpLspPingCtlTable
         'sdpPing'                none
         'svcPing'                none
         'vccvPing'               tmnxOamVccvPingCtlTable
         'vprnPing'               tmnxOamVprnPingCtlTable
         'vxlanPing'              tmnxOamVxlanPingCtlTable

         For most test types, all test results are available in
         tmnxOamPingResultsTable and tmnxOamPingHistoryTable. Exceptions are
         noted in the following two tables.

         tmnxOamPingCtlTestMode   Additional Results Table(s)
         ----------------------   ----------------------------
         'ancpLoopback'           tmnxOamAncpTestHistoryTable
         'bierPing'               tmnxOamBierPingHistoryTable
         'macPing'                tmnxOamMacPingHistoryTable
         'mrInfo'                 tmnxOamMRInfoRespIfNbrTable
                                  tmnxOamMRInfoRespIfTable
                                  tmnxOamMRInfoRespTable
         'vxlanPing'              tmnxOamVxlanPingHistoryTable
                                  tmnxOamVxlanPingResultsTable
         otherwise                none

         tmnxOamPingCtlTestMode   Unused Standard Results Table
         ----------------------   -----------------------------
         'ancpLoopback'           tmnxOamPingHistoryTable
         'macPing'                tmnxOamPingHistoryTable
         'macPopulate'            tmnxOamPingHistoryTable
         'macPurge'               tmnxOamPingHistoryTable
         otherwise                none

         The support for Service Assurance Agent (SAA) tests (i.e. tests with
         tmnxOamSaaCtlTable rows) and OAM tests (i.e. tests without
         tmnxOamSaaCtlTable rows) varies with the test type, as shown in the
         following table.

         tmnxOamPingCtlTestMode   SAA Supported   OAM Supported
         ----------------------   -------------   -------------
         'ancpLoopback'                      No             Yes
         'atmPing'                           No             Yes
         'bierPing'                          No             Yes
         'cpePing'                          Yes             Yes
         'dnsPing'                          Yes             Yes
         'ethCfmLoopback'                   Yes              No
         'ethCfmTwoWayDelay'                Yes              No
         'ethCfmTwoWaySlm'                  Yes              No
         'gtpPing'                           No             Yes
         'icmpPing'                         Yes             Yes
         'lspPing'                          Yes             Yes
         'macPing'                          Yes             Yes
         'macPopulate'                       No             Yes
         'macPurge'                          No             Yes
         'mfibPing'                          No             Yes
         'mrInfo'                            No             Yes
         'mtuPing'                           No             Yes
         'p2mpLspPing'                       No             Yes
         'sdpPing'                          Yes             Yes
         'svcPing'                           No             Yes
         'vccvPing'                         Yes             Yes
         'vprnPing'                         Yes             Yes
         'vxlanPing'                         No             Yes"
    DEFVAL      { none }
    ::= { tmnxOamPingCtlEntry 6 }

tmnxOamPingCtlAdminStatus        OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabledAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlAdminStatus specifies the administrative
         state of the specified ping test.

         An attempt to set tmnxOamPingCtlAdminStatus to 'enabled' will fail if
         the objects required by the ping test have not been set.

         When this object has the value 'enabled' an attempt to modify any of
         the test's configurable objects will fail.

         Upon completion of a ping test, the agent resets the value of this
         object to 'disabled'."
    ::= { tmnxOamPingCtlEntry 7 }

tmnxOamPingCtlOrigSdpId          OBJECT-TYPE
    SYNTAX      SdpId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the originating SDP-ID to be used for performing
         a sdp-ping or mtu-ping operation.  This parameter is required
         only if tmnxOamPingCtlTestMode has a value of either 'sdpPing'
         or 'mtuPing'.

         The far-end address of the specified SDP-ID is the expected
         responder-id within each OAM reply message received.  The
         specified SDP-ID defines the encapsulation of the SDP tunnel
         encapsulation used to reach the far-end.  This can be IP/GRE
         or MPLS.  The value of tmnxOamPingCtlFcName is used to define
         the outgoing forwarding class used for the SDP encapsulation.

         If the value of tmnxOamPingCtlOrigSdpId is invalid, or the SDP
         is administratively down, or unavailable, the OAM Echo request
         message probe is not sent and an appropriate error value is
         written to tmnxOamPingHistoryStatus for that probe entry.  Once
         the interval timer expires, the next probe attempt will be made
         if required."
    DEFVAL      { 0 }
    ::= { tmnxOamPingCtlEntry 8 }

tmnxOamPingCtlRespSdpId          OBJECT-TYPE
    SYNTAX      SdpId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the return SDP-ID to be used by the far-end node for
         its message reply.  This parameter is optional and is valid only if
         tmnxOamPingCtlTestMode has a value of 'sdpPing'.

         If this SDP-ID does not exist on the far-end, terminates on another
         node different than the originating node, or some other issue
         prevents the far-end from using the specified SDP-ID, the OAM Echo
         message reply is sent using generic IP/GRE OAM encapsulation.  The
         received forwarding class (as mapped on the ingress network interface
         for the far-end) defines the forwarding class encapsulation for the
         reply message."
    DEFVAL      { 0 }
    ::= { tmnxOamPingCtlEntry 9 }

tmnxOamPingCtlFcName             OBJECT-TYPE
    SYNTAX      TFCName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlFcName specifies the forwarding class to be
         used when launching the probe(s).  The forwarding class name must be
         present in the index column of TIMETRA-QOS-MIB::tFCNameTable.

         As shown in the following table:
         1.  This object is applicable to a subset of the test types, and
         2.  This object is configurable for a subset of the test types, and
         3.  The default forwarding class depends on the test type.

         tmnxOamPingCtlTestMode   Applicable?   Configurable?   Default
         ----------------------   -----------   -------------   -------
         'cpePing'                yes           yes             'be'
         'bierPing'               yes           yes             'be'
         'ethCfmLoopback'         yes           yes             'nc'
         'ethCfmTwoWayDelay'      yes           yes             'nc'
          ethCfmTwoWaySlm'        yes           yes             'nc'
         'icmpPing'               yes           yes             'nc'
         'lspPing'                yes           yes             'be'
         'macPing'                yes           yes             'be'
         'p2mpLspPing'            yes           yes             'be'
         'sdpPing'                yes           yes             'be'
         'svcPing'                yes           no              'nc'
         'vccvPing'               yes           yes             'be'
         'vprnPing'               yes           yes             'be'
         'vxlanPing'              yes           yes             'be'
         otherwise                no            N/A             N/A

         For 'ethCfmLoopback','ethCfmTwoWayDelay', and 'ethCfmTwoWaySlm', the
         forwarding class depends on whether the request is configured to egress
         on a network port or an access port.  In the network port case, the
         forwarding class is the forwarding class of the pseudowire.  In the
         access port case, the forwarding class is that of the SAP's egress
         encapsulation policy.

         For 'lspPing' this is the forwarding class of the LSP tunnel.

         For 'macPing' or 'sdpPing' this is the forwarding class of the SDP
         encapsulation.

         For 'p2mpLspPing' this is the forwarding class of the P2MP LSP tree.

         For 'vccvPing' this is the forwarding class of the pseudowire.

         If forwarding classes are mapped by the applicable QoS policy, the
         probe(s) may be launched using a different forwarding class than the
         forwarding class specified by this object."
    DEFVAL      { "be" }
    ::= { tmnxOamPingCtlEntry 10 }

tmnxOamPingCtlProfile            OBJECT-TYPE
    SYNTAX      TProfile
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlProfile specifies the profile to be used
         with the forwarding class specified in tmnxOamPingCtlFcName.

         As shown in the following table:
         1.  This object is applicable to a subset of the test types, and
         2.  This object is configurable for a subset of the test types, and
         3.  The default profile value depends on the test type.

         tmnxOamPingCtlTestMode   Applicable?   Configurable?   Default
         ----------------------   -----------   -------------   -------
         'cpePing'                yes           yes             'out(2)'
         'bierPing'               yes           yes             'out(2)'
         'ethCfmLoopback'         yes           yes             'in(1)'
         'ethCfmTwoWayDelay'      yes           yes             'in(1)'
         'ethCfmTwoWaySlm'        yes           yes             'in(1)'
         'lspPing'                yes           yes             'out(2)'
         'macPing'                yes           yes             'out(2)'
         'p2mpLspPing'            yes           yes             'out(2)'
         'sdpPing'                yes           yes             'out(2)'
         'svcPing'                yes           no              'in(1)'
         'vccvPing'               yes           yes             'out(2)'
         'vprnPing'               yes           yes             'out(2)'
         'vxlanPing'              yes           yes             'in(1)'
         otherwise                no            N/A             N/A"
    DEFVAL      { out }
    ::= { tmnxOamPingCtlEntry 11 }

tmnxOamPingCtlMtuStartSize       OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 40..9786)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlMtuStartSize specifies the size of the
         first OAM Echo message sent as part of an 'mtuPing' test.

         Setting this object to a non-zero value is a prerequisite for starting
         an 'mtuPing' test.  Its value must be less than or equal to the value
         of tmnxOamPingCtlMtuEndSize.

         An attempt to set this object from a non-zero value to zero will fail
         with a wrongValue error.

         Changing the message size is a method of checking the ability of an
         SDP to support a particular path-mtu value. The size of the message
         does not include the SDP encapsulation, VC-Label (if applied) or any
         DLC headers or trailers."
    DEFVAL      { 0 }
    ::= { tmnxOamPingCtlEntry 12 }

tmnxOamPingCtlMtuEndSize         OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 40..9786)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlMtuEndSize specifies the size of the last
         OAM Echo message sent as part of an 'mtuPing' test.

         Setting this object to a non-zero value is a prerequisite for starting
         an 'mtuPing' test.  Its value must be greater than or equal to
         the value of tmnxOamPingCtlMtuStartSize.

         An attempt to set this object from a non-zero value to zero will fail
         with a wrongValue error."
    DEFVAL      { 0 }
    ::= { tmnxOamPingCtlEntry 13 }

tmnxOamPingCtlMtuStepSize        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..512)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the number of octets by which to increment the
         OAM Echo message request size for each message request sent
         when tmnxOamPingCtlTestMode is set equal to 'mtuPing'.  If the
         next incremented message size is greater than
         tmnxOamPingCtlMtuEndSize, the last message has already been
         sent.  The next size message is not sent until a reply is
         received or three messages have timed out at the current
         size."
    DEFVAL      { 32 }
    ::= { tmnxOamPingCtlEntry 14 }

tmnxOamPingCtlTargetIpAddress    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamPingCtlTgtAddrType and
         tmnxOamPingCtlTgtAddress."
    DEFVAL      { '00000000'h }
    ::= { tmnxOamPingCtlEntry 16 }

tmnxOamPingCtlServiceId          OBJECT-TYPE
    SYNTAX      TmnxServId (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlServiceId specifies the service ID of the
         service being tested.

         The applicability of tmnxOamPingCtlServiceId varies with the test
         type, as shown in the following table.

         tmnxOamPingCtlTestMode   Applicability    Related Virtual Router Object
         ----------------------   -------------    -----------------------------
         'cpePing'                mandatory        none
         'icmpPing'               optional         tmnxOamPingCtlVRtrID
         'macPing'                mandatory        none
         'macPopulate'            mandatory        none
         'macPurge'               mandatory        none
         'mfibPing'               mandatory        none
         'mrInfo'                 optional         tmnxOamPingCtlVRtrID
         'p2mpLspPing'            optional         tmnxOamPingCtlVRtrID
         'svcPing'                mandatory        none
         'vprnPing'               mandatory        none
         'vxlanPing'              mandatory        none
         otherwise                not applicable   none

         When tmnxOamPingCtlServiceId is mandatory, a non-zero value must be
         provided.

         When tmnxOamPingCtlServiceId is optional, it is used to specify a VPRN
         service.  The test must use the VPRN service's virtual router.

         When a related virtual router object is shown, the interaction is
         described in the DESCRIPTION clause of the listed object.

         When tmnxOamPingCtlTestMode is 'icmpPing',
         tmnxOamPingCtlRouterInstanceName is the preferred object for
         specifying the service to be tested.

         Service IDs larger than 2147483647 are internal, so they are excluded
         from the range.

         The default value is the null service ID."
    DEFVAL      { 0 }
    ::= { tmnxOamPingCtlEntry 17 }

tmnxOamPingCtlLocalSdp           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamPingCtlLocalSdp is 'true', the 'svcPing' test
         determines an egress SDP-ID that is bound to the service that has
         the far-end IP address specified in tmnxOamPingCtlTgtAddress
         assigned to it.  The far-end address of the specified SDP-ID is
         the expected responder-id within the OAM Echo reply message.  The
         SDP-ID defines the encapsulation of the SDP tunnel encapsulation
         used to reach the far-end.  This can be IP/GRE or MPLS.  On the
         originator egress, the Service-ID must have an associated VC-Label
         to reach the far-end address of the SDP-ID and the SDP-ID must be
         operational for the message to be sent.

         This object is applicable only when tmnxOamPingCtlTestMode is
         'svcPing'."
    DEFVAL      { false }
    ::= { tmnxOamPingCtlEntry 18 }

tmnxOamPingCtlRemoteSdp          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlRemoteSdp specifies the encapsulation of
         the ping reply to be sent by the far end node.

         When tmnxOamPingCtlRemoteSdp is 'false', the far-end node sends the
         reply using the generic IP/GRE OAM encapsulation.

         When tmnxOamPingCtlRemoteSdp is 'true', the far-end node sends the
         reply using the same service tunnel encapsulation labeling used for the
         associated service traffic.  If that labeling cannot be found, the
         generic IP/GRE OAM encapsulation is used.

         This object is applicable only when tmnxOamPingCtlTestMode is
         'svcPing'."
    DEFVAL      { false }
    ::= { tmnxOamPingCtlEntry 19 }

tmnxOamPingCtlSize               OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16384)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlSize specifies (directly or indirectly) the
         size of the OAM echo request PDU.

         The supported ranges, etc, for each test type are specified in the
         following table.

         tmnxOamPingCtlTestMode  Minimum  Maximum  Default  Auto Adjust
         ----------------------  -------  -------  -------  -----------
         'ethCfmLoopback'              0     1500        0           No
         'ethCfmTwoWaySlm'             0     1500        0           No
         'icmpPing'                    0    16384       56           No
         'lspPing'                     1     9786        1          Yes
         'macPing'                     1     9786       72          Yes
         'mfibPing'                    1     9786       72          Yes
         'p2mpLspPing'                 1     9786        1          Yes
         'sdpPing'                    72     9786       72          Yes
         'vccvPing'                    1     9786        1          Yes
         'vprnPing'                    1     9786       72          Yes
         'vxlanPing'                   0     2000        0           No
         otherwise                tmnxOamPingCtlSize is not significant

         For a test type supporting Auto Adjust, if the tmnxOamPingCtlSize value
         is too small, SROS automatically chooses the next highest supported PDU
         size.  For example, if tmnxOamPingCtlSize is 1 when a 'vccvPing' test
         is started on a FEC 128 pseudowire, an 88 octet echo request PDU is
         sent.

         For a test type which does not support Auto Adjust, the
         tmnxOamPingCtlSize value must lead to a valid echo request PDU size.

         When tmnxOamPingCtlTestMode has the value 'ethCfmLoopback' or
         'ethCfmTwoWaySlm', tmnxOamPingCtlSize specifies the number of octets in
         the Value field of the Data TLV of the applicable Y.1731 PDU.  If zero
         is specified, the packet has no Data TLV.

         When tmnxOamPingCtlTestMode has the value 'icmpPing',
         tmnxOamPingCtlSize specifies the size of the Data field of the RFC 792
         ICMP Echo Message.

         When tmnxOamPingCtlTestMode has the value 'vxlanPing',
         tmnxOamPingCtlSize specifies the total size of the Pad TLV added to the
         launched VXLAN ping request.  tmnxOamPingCtlSize = 0 indicates
         no Pad TLV is added.  The smallest Pad TLV is five bytes, so values in
         the range 1..4 are rejected.

         IPv4 echo requests sent for an 'icmpPing' test can optionally be
         fragmented (see tmnxOamIcmpPingCtlDoNotFragment).  For all the other
         ping test types, echo requests are launched without fragmentation."
    REFERENCE
        "RFC 792, 'INTERNET CONTROL MESSAGE PROTOCOL', September 1981.
         RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.4, 'Pad TLV'.
         ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet
         based networks', 07/2011, Section 9, 'OAM PDU types'."
    DEFVAL      { 72 }
    ::= { tmnxOamPingCtlEntry 20 }

tmnxOamPingCtlTimeOut            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..120)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTimeOut specifies the timeout value, in
         seconds, to be used during a test run.

         Timers (with duration configured using the tmnxOamPingCtlTimeOut value)
         are used in one of two ways during a test run.
         1.  Per Probe:  a timer is started each time a probe is sent.  If the
             timer expires before the probe response arrives, the probe is
             declared failed.  This is the traditional timeout method for a
             sequence of probes.
             OR
         2.  Per Test:  a timer is started once per test run, when the last
             probe of the test run is sent.  ANY probe which does not have a
             response when the timer expires is declared failed.

         SROS chooses 'Per Probe' or 'Per Test' based on the
         tmnxOamPingCtlTestMode value.  The choice is not configurable.

         The accepted minimum, maximum, and default values for
         tmnxOamPingCtlTimeOut depend on tmnxOamPingCtlTestMode, as shown in the
         following table.  The table also shows the timer usage for the test
         mode.

         tmnxOamPingCtlTestMode  Min  Max  Def   Timer Usage
         ----------------------  ---  ---  ---   -----------
         'atmPing'                 1   10    5   Per Probe
         'bierPing'                1  120   10   Per Probe
         'dnsPing'                 1  120    5   Per Probe
         'ethCfmLoopback'          1   10    5   Per Probe
         'ethCfmTwoWayDelay'       1   10    5   Per Test
         'ethCfmTwoWaySlm'         1   10    5   Per Test
         'gtpPing'                 1   10    5   Per Probe
         'icmpPing'                1   10    5   Per Test
         'lspPing'                 1   10    5   Per Probe
         'macPing'                 1   10    5   Per Probe
         'mfibPing'                1  100    5   Per Probe
         'mtuPing'                 1   10    5   Per Probe
         'p2mpLspPing'             1  120   10   Per Probe
         'sdpPing'                 1   10    5   Per Probe
         'vccvPing'                1   10    5   Per Probe
         'vprnPing'                1  100    5   Per Probe
         'vxlanPing'               1   10    5   Per Probe
         otherwise  .........  the value of tmnxOamPingCtlTimeOut is irrelevant"
    DEFVAL      { 5 }
    ::= { tmnxOamPingCtlEntry 21 }

tmnxOamPingCtlProbeCount         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..100000)
    UNITS       "probes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlProbeCount specifies the number of probes
         to send during the test.

         The relevance, range, and default for tmnxOamPingCtlProbeCount depends
         on tmnxOamPingCtlTestMode, as follows.

         tmnxOamPingCtlTestMode   Relevant?     Min      Max    Default
         ----------------------   ---------     ---      ---    -------
         'ancpLoopback'                 Yes       1       32          1
         'atmPing'                      Yes       1      100          1
         'cpePing'                      Yes       1      100          1
         'dnsPing'                      Yes       1      100          1
         'ethCfmLoopback'               Yes       1      100          1
         'ethCfmTwoWayDelay'            Yes       1     1000          1
         'ethCfmTwoWaySlm'              Yes       1     1000          1
         'gtpPing'                      Yes       1      100          1
         'icmpPing'                     Yes       1   100000          5
         'lspPing'                      Yes       1      100          1
         'macPing'                      Yes       1      100          1
         'mfibPing'                     Yes       1      100          1
         'sdpPing'                      Yes       1      100          1
         'vccvPing'                     Yes       1      100          1
         'vprnPing'                     Yes       1      100          1
         'vxlanPing'                    Yes       1     1024          1
         otherwise                       No     N/A      N/A        N/A"
    DEFVAL      { 1 }
    ::= { tmnxOamPingCtlEntry 22 }

tmnxOamPingCtlInterval           OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlInterval specifies the time to wait between
         the transmission of one OAM Echo request and the next.  The UNITS are
         specified by tmnxOamPingCtlIntervalUnits.  For example, if
         tmnxOamPingCtlInterval has the value 1, and tmnxOamPingCtlIntervalUnits
         has the value 'centiseconds(2)', the interval between OAM Echo requests
         is 0.01 seconds.

         The applicability, range, and default value of the interval specified
         using the tmnxOamPingCtlInterval and tmnxOamPingCtlIntervalUnits pair
         vary with tmnxOamPingCtlTestMode and tmnxOamIcmpPingCtlRapid, as shown
         in the following table.

         tmnxOamPingCtlTestMode    Supported Values (sec)          Default (sec)
         ------------------------  ------------------------------  -------------
         'bierPing'                not applicable
         'ethCfmLoopback'          1, 2, .. 10                              5
         'ethCfmTwoWayDelay'       0.1, 0.2, .. 0.9;  1, 2, .. 10           5
         'ethCfmTwoWaySlm'         0.1, 0.2, .. 0.9;  1, 2, .. 10           5
         'gtpPing'                 1, 2, .. 10                              5
         'icmpPing' with RAPID     0.01, 0.02, .. 100.00                    0.01
         'icmpPing' without RAPID  1, 2, .. 10000                           1
         'p2mpLspPing'             not applicable
         'vxlanPing'               0.1;  1, 2, .. 10                        1
         otherwise                 1, 2, .. 10                              1"
    DEFVAL      { 1 }
    ::= { tmnxOamPingCtlEntry 23 }

tmnxOamPingCtlMaxRows            OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "rows"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.0R17."
    DEFVAL      { 300 }
    ::= { tmnxOamPingCtlEntry 24 }

tmnxOamPingCtlTrapGeneration     OBJECT-TYPE
    SYNTAX      BITS {
        probeFailure   (0),
        testFailure    (1),
        testCompletion (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTrapGeneration specifies the
         notification(s) to send for a test run.

         Each bit enables the transmission of one notification, as follows.
         'probeFailure(0)':  send one tmnxOamPingProbeFailedV3 notification if
            at least M successive probes failed during the test run.  M is
            configured using tmnxOamPingCtlTrapProbeFailureFilter.
         'testFailure(1)':  send one tmnxOamPingTestFailedV3 notification if at
            least N probes failed during the test run.  N is configured using
            tmnxOamPingCtlTrapTestFailureFilter.
         'testCompletion(2)':  send one tmnxOamPingTestCompletedV3 notification
            when the test run is complete."
    DEFVAL      { {} }
    ::= { tmnxOamPingCtlEntry 25 }

tmnxOamPingCtlTrapProbeFailureFilter OBJECT-TYPE
    SYNTAX      Unsigned32 (0..15)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTrapProbeFailureFilter specifies the
         threshold for generating a tmnxOamPingProbeFailedV3 notification.

         The semantics are explained in the tmnxOamPingProbeFailedV3
         DESCRIPTION clause.

         Setting this object to zero is not recommended - results will vary
         with the test type."
    DEFVAL      { 1 }
    ::= { tmnxOamPingCtlEntry 26 }

tmnxOamPingCtlTrapTestFailureFilter OBJECT-TYPE
    SYNTAX      Unsigned32 (0..15)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTrapTestFailureFilter specifies the
         threshold for generating a tmnxOamPingTestFailedV3 notification.

         The semantics are explained in the tmnxOamPingTestFailedV3 DESCRIPTION
         clause.

         Setting this object to zero is not recommended."
    DEFVAL      { 1 }
    ::= { tmnxOamPingCtlEntry 27 }

tmnxOamPingCtlSAA                OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlSAA specifies if this test is an SAA test
         (Service Assurance Agent; 'true'), or an OAM test ('false').  If
         there is a tmnxOamSaaCtlTable row with the specified index values,
         'true' is returned.  Otherwise, 'false' is returned."
    DEFVAL      { false }
    ::= { tmnxOamPingCtlEntry 28 }

tmnxOamPingCtlRuns               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlRuns indicates the number of times this OAM
         ping test has started."
    ::= { tmnxOamPingCtlEntry 29 }

tmnxOamPingCtlFailures           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlFailures indicates the number of times this
         OAM ping test has failed."
    ::= { tmnxOamPingCtlEntry 30 }

tmnxOamPingCtlLastRunResult      OBJECT-TYPE
    SYNTAX      TmnxOamTestResult
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlLastRunResult indicates the completion
         status the last time this test was executed.  If this OAM test is
         currently in progress, this object indicates the result of the
         previous test run, if any."
    ::= { tmnxOamPingCtlEntry 31 }

tmnxOamPingCtlLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlLastChanged indicates the time the value of
         a settable object in this row was last changed."
    ::= { tmnxOamPingCtlEntry 32 }

tmnxOamPingCtlVRtrID             OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlVRtrID specifies the virtual router to be
         used for the test.

         Zero indicates no virtual router is specified.

         A non-zero value must be the index of an active row in
         TIMETRA-VRTR-MIB::vRtrConfTable (i.e. tmnxOamPingCtlVRtrID must match
         a valid TIMETRA-VRTR-MIB::vRtrID value).

         This object is applicable if tmnxOamPingCtlTestMode is 'icmpPing',
         'gtpPing', 'mrInfo', or 'p2mpLspPing'.

         The table below shows the supported combinations of system-configured
         virtual routers and test types.

                                 Supported for  Supported for  Supported for
         tmnxOamPingCtlTestMode  Base ?         management ?   vpls-management ?
         ----------------------  -------------  -------------  -----------------
         'icmpPing'              Yes            Yes            Yes
         'gtpPing'               Yes            Yes            Yes
         'mrInfo'                Yes            No             No
         'p2mpLspPing'           Yes            No             No

         When directing an 'icmpPing' test to use a virtual router, the
         preferred object is tmnxOamPingCtlRouterInstanceName.

         When directing an 'mrInfo' or 'p2mpLspPing' test to use a virtual
         router associated with a VPRN service, the virtual router can be
         specified using tmnxOamPingCtlVRtrID (with the VPRN's virtual router
         number) or tmnxOamPingCtlServiceId (with the VPRN's service number).
         tmnxOamPingCtlServiceId is preferred, because service numbers are
         constant across an SROS reboot (while virtual routers may be
         renumbered).  If non-default values are specified for both
         tmnxOamPingCtlVRtrID and tmnxOamPingCtlServiceId,
         tmnxOamPingCtlServiceId is used."
    DEFVAL      { 1 }
    ::= { tmnxOamPingCtlEntry 33 }

tmnxOamPingCtlTgtAddrType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTgtAddrType specifies the address type of
         tmnxOamPingCtlTgtAddress.

         The values which can be used as part of a successful test depend on
         tmnxOamPingCtlTestMode, as follows.

         Test Mode                    tmnxOamPingCtlTgtAddrType Values Supported
         -----------       -----------------------------------------------------
         'cpePing'                      'ipv4(1)'
         'dnsPing'                      'ipv4(1)' 'ipv6(2)'
         'gtpPing'                      'ipv4(1)'
         'icmpPing'                     'ipv4(1)' 'ipv6(2)' 'ipv6z(4)' 'dns(16)'
         'mfibPing'                     'ipv4(1)' 'ipv6(2)'
         'mrInfo'                       'ipv4(1)'                      'dns(16)'
         'svcPing'                      'ipv4(1)'
         'vccvPing'        'unknown(0)' 'ipv4(1)'
         'vprnPing'                     'ipv4(1)' 'ipv6(2)'
         'vxlanPing'                    'ipv4(1)'
         otherwise         'unknown(0)'"
    DEFVAL      { unknown }
    ::= { tmnxOamPingCtlEntry 34 }

tmnxOamPingCtlTgtAddress         OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlTgtAddress specifies the destination host
         address to be used when performing an OAM ping operation.  The
         corresponding address type is configured using
         tmnxOamPingCtlTgtAddrType.

         For 'dnsPing' this is the address of the DNS server that will be asked
         to resolve the DNS name specified by tmnxOamPingCtlDnsName."
    DEFVAL      { ''H }
    ::= { tmnxOamPingCtlEntry 35 }

tmnxOamPingCtlSrcAddrType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlSrcAddrType specifies the address type of
         tmnxOamPingCtlSrcAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamPingCtlEntry 36 }

tmnxOamPingCtlSrcAddress         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlSrcAddress specifies the source IP host
         address to be used when performing an OAM ping operation.  The
         corresponding address type is configured using
         tmnxOamPingCtlSrcAddrType.

         This object is used when tmnxOamPingCtlTestMode is 'dnsPing',
         'icmpPing', 'lspPing', 'p2mpLspPing' (LDP), or 'vccvPing'."
    DEFVAL      { ''H }
    ::= { tmnxOamPingCtlEntry 37 }

tmnxOamPingCtlDnsName            OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..255))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlDnsName specifies the DNS name to be
         resolved to an IP address.

         This object is used when tmnxOamPingCtlTestMode is 'dnsPing'."
    DEFVAL      { ''H }
    ::= { tmnxOamPingCtlEntry 38 }

tmnxOamPingCtlDNSRecord          OBJECT-TYPE
    SYNTAX      INTEGER {
        ipv4Arecord    (1),
        ipv6AAAArecord (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlDNSRecord specifies which DNS record is to
         be retrieved in this test.

         This object is used when tmnxOamPingCtlTestMode is 'dnsPing'."
    DEFVAL      { ipv4Arecord }
    ::= { tmnxOamPingCtlEntry 39 }

tmnxOamPingCtlIntervalUnits      OBJECT-TYPE
    SYNTAX      INTEGER {
        seconds      (1),
        centiseconds (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlIntervalUnits specifies the units for
         tmnxOamPingCtlInterval.  For example, if tmnxOamPingCtlIntervalUnits
         has the value 'centiseconds(2)', and tmnxOamPingCtlInterval has the
         value 10, the test's interval is 0.1 seconds.

         The supported combinations of tmnxOamPingCtlIntervalUnits,
         tmnxOamPingCtlInterval, tmnxOamPingCtlTestMode, and
         tmnxOamIcmpPingCtlRapid are specified in the tmnxOamPingCtlInterval
         DESCRIPTION clause.

         The interaction between this object and tmnxOamIcmpPingCtlRapid is
         specified in the tmnxOamIcmpPingCtlRapid DESCRIPTION clause."
    DEFVAL      { seconds }
    ::= { tmnxOamPingCtlEntry 40 }

tmnxOamPingCtlSubscriberName     OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlSubscriberName specifies the name of the
         subscriber to be pinged.

         When a non-default value for this object is specified, a Layer-2-Aware
         Network Address Translation (NAT) ping is requested.  The subscriber
         name and the target IP address (i.e. tmnxOamPingCtlTgtAddress) are used
         together to ping the subscriber's device.

         A valid Layer-2-Aware NAT ping must satisfy all of the following
         conditions.
         1.  tmnxOamPingCtlSubscriberName is a valid subscriber name.
         2.  The test type (i.e. tmnxOamPingCtlTestMode) is 'icmpPing'.
         3.  The test is not an SAA test (as configured using
             tmnxOamSaaCtlRowStatus).
         4.  The target address type (as configured using
             tmnxOamPingCtlTgtAddrType) is 'ipv4(1)'.
         5.  The value of each of the following objects is default:
             tmnxOamIcmpPingCtlBypassRouting,
             tmnxOamIcmpPingCtlEgrIfName,
             tmnxOamIcmpPingCtlNhAddrType,
             tmnxOamIcmpPingCtlRapid."
    REFERENCE
        "IETF draft-miles-behave-l2nat-00, 'Layer2-Aware NAT', March 4, 2009"
    DEFVAL      { ''H }
    ::= { tmnxOamPingCtlEntry 41 }

tmnxOamPingCtlRouterInstanceName OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingCtlRouterInstanceName specifies the name of
         the service or virtual router(s) used to transmit the test's probes.

         Supported values vary with the test type, as follows.

         tmnxOamPingCtlTestMode   Names Supported
         ----------------------   ---------------------------
         'dnsPing'                'Base'
                                  '_Base_and_management'
                                  'management'
                                  <VPRN-service-name>

         'icmpPing'               '' (i.e. the empty string),
                                  'Base'
                                  'management'
                                  'vpls-management'
                                  <CPM-virtual-router-name>
                                  <VPRN-service-name>

         otherwise                not relevant.

         '_Base_and_management' specifies the 'dnsPing' test will send back to
         back DNS name resolution requests to the specified DNS server (as
         configured using tmnxOamPingCtlTgtAddress) using the Base router and
         the management router.  The first successful reply is used.  The
         timeout configured using tmnxOamPingCtlTimeOut applies to the two
         requests simultaneously.  This option exists to match the day-one
         behavior of 'dnsPing' (when the router-instance was not configurable).

         A <CPM-virtual-router-name> is a user-configured
         TIMETRA-VRTR-MIB::vRtrName, with TIMETRA-VRTR-MIB::vRtrType = 'vr(3)'.

         A <VPRN-service-name> is a TIMETRA-SERV-MIB::svcName, with
         TIMETRA-SERV-MIB::svcType = 'vprn(4)'.

         Names other than the names listed above are accepted, but will not
         lead to a successful test.

         The service or virtual router(s) used by a 'dnsPing' test can only be
         specified using tmnxOamPingCtlRouterInstanceName.

         For 'dnsPing', the default is '_Base_and_management'.

         The service or virtual router used by an 'icmpPing' test can be
         specified using tmnxOamPingCtlVRtrID, tmnxOamPingCtlServiceId, and/or
         tmnxOamPingCtlRouterInstanceName.

         The following two combinations of the three objects are supported:
         1.  tmnxOamPingCtlVRtrID = 0,
             tmnxOamPingCtlServiceId = 0,
             tmnxOamPingCtlRouterInstanceName != ''.
             This is the preferred approach.
         2.  One or both of tmnxOamPingCtlVRtrID and tmnxOamPingCtlServiceId has
             a non-zero value,
             tmnxOamPingCtlRouterInstanceName = ''.

         An attempt to change TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 away
         from 'classic(1)' is blocked if tmnxOamPingCtlRouterInstanceName is
         empty for an 'icmpPing' test.

         When TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 is not 'classic(1)',
         each 'icmpPing' test must continue to have a non-empty
         tmnxOamPingCtlRouterInstanceName."
    DEFVAL      { ''H }
    ::= { tmnxOamPingCtlEntry 42 }

tmnxOamPingResultsTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamPingResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamPingResultsTable contains the run-level test results for OAM
         ping tests.

         Probe-level test results for ping tests reside in
         tmnxOamPingHistoryTable."
    ::= { tmnxOamPingObjs 4 }

tmnxOamPingResultsEntry          OBJECT-TYPE
    SYNTAX      TmnxOamPingResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamPingResultsEntry contains the run-level test results for one
         OAM ping test run.

         A row is created when a ping test is enabled (using
         tmnxOamPingCtlAdminStatus).

         A row is destroyed when:
         1.  The corresponding test configuration is destroyed (using
         tmnxOamPingCtlRowStatus), or
         2.  Results are cleared for the test (using
         TIMETRA-CLEAR-MIB::tmnxClearAction), or
         3.  A new run result is available, and the limit on the number of
         run results retained (3, currently) has been reached.  In that case,
         the oldest run result row is destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex
    }
    ::= { tmnxOamPingResultsTable 1 }

TmnxOamPingResultsEntry          ::= SEQUENCE
{
    tmnxOamPingResultsOperStatus     INTEGER,
    tmnxOamPingResultsMinRtt         Unsigned32,
    tmnxOamPingResultsMaxRtt         Unsigned32,
    tmnxOamPingResultsAverageRtt     Unsigned32,
    tmnxOamPingResultsRttSumOfSquares Unsigned32,
    tmnxOamPingResultsMtuResponseSize Unsigned32,
    tmnxOamPingResultsSvcPing        INTEGER,
    tmnxOamPingResultsProbeResponses Unsigned32,
    tmnxOamPingResultsSentProbes     Unsigned32,
    tmnxOamPingResultsLastGoodProbe  DateAndTime,
    tmnxOamPingResultsLastRespHeader OCTET STRING,
    tmnxOamPingResultsMinTt          Integer32,
    tmnxOamPingResultsMaxTt          Integer32,
    tmnxOamPingResultsAverageTt      Integer32,
    tmnxOamPingResultsTtSumOfSquares Unsigned32,
    tmnxOamPingResultsMinInTt        Integer32,
    tmnxOamPingResultsMaxInTt        Integer32,
    tmnxOamPingResultsAverageInTt    Integer32,
    tmnxOamPingResultsInTtSumOfSqrs  Unsigned32,
    tmnxOamPingResultsOutJitter      Integer32,
    tmnxOamPingResultsInJitter       Integer32,
    tmnxOamPingResultsRtJitter       Integer32,
    tmnxOamPingResultsProbeTimeouts  Unsigned32,
    tmnxOamPingResultsProbeFailures  Unsigned32,
    tmnxOamPingResultsTestRunIndex   Unsigned32,
    tmnxOamPingResultsRttOFSumSquares Counter32,
    tmnxOamPingResultsRttHCSumSquares Counter64,
    tmnxOamPingResultsTtOFSumSquares Counter32,
    tmnxOamPingResultsTtHCSumSquares Counter64,
    tmnxOamPingResultsInTtOFSumSqrs  Counter32,
    tmnxOamPingResultsInTtHCSumSqrs  Counter64,
    tmnxOamPingResultsTestRunResult  TmnxOamTestResult,
    tmnxOamPingResultsOutOfOrder     Counter32
}

tmnxOamPingResultsOperStatus     OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled  (1),
        disabled (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsOperStatus indicates the operational
         state of the specified test run.  'enabled(1)' indicates the test is
         running."
    ::= { tmnxOamPingResultsEntry 1 }

tmnxOamPingResultsMinRtt         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsMinRtt indicates the minimum round trip
         time for the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 4 }

tmnxOamPingResultsMaxRtt         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsMaxRtt indicates the maximum round trip
         time for the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 5 }

tmnxOamPingResultsAverageRtt     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsAverageRtt indicates the average round
         trip time for the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 6 }

tmnxOamPingResultsRttSumOfSquares OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsRttSumOfSquares indicates the least
         significant 32 bits of tmnxOamPingResultsRttHCSumSquares."
    ::= { tmnxOamPingResultsEntry 7 }

tmnxOamPingResultsMtuResponseSize OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the largest size OAM Echo request message that
         received a valid reply.

         The value of this object MUST be reported as 0 when no ping responses
         have been received or an active test has not yet timed out.  When
         tmnxOamPingCtlTestMode does not have a value of 'mtuPing', this object
         is not relevant and should contain a value of 0."
    ::= { tmnxOamPingResultsEntry 8 }

tmnxOamPingResultsSvcPing        OBJECT-TYPE
    SYNTAX      INTEGER {
        undetermined (0),
        failed       (1),
        success      (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsSvcPing indicates the status of the
         specified test run.

         When the value is read using an SNMP Get:
         1.  If the test type is 'svcPing', the status of the test run is
             returned.
         2.  If the test type is not 'svcPing', 'undetermined(0)' is returned.

         When the value is reported in a notification, the status of the test
         run is reported (for any ping test type)."
    ::= { tmnxOamPingResultsEntry 9 }

tmnxOamPingResultsProbeResponses OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "responses"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsProbeResponses indicates the number of
         responses received for the specified test run."
    ::= { tmnxOamPingResultsEntry 10 }

tmnxOamPingResultsSentProbes     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "probes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsSentProbes indicates the number of
         probes sent for the specified test run."
    ::= { tmnxOamPingResultsEntry 11 }

tmnxOamPingResultsLastGoodProbe  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsLastGoodProbe indicates the date and
         time when the most recent response was received for the specified test
         run.

         1970-Jan-01 00:00:00.0 UTC is returned if a response has not been
         received."
    ::= { tmnxOamPingResultsEntry 12 }

tmnxOamPingResultsLastRespHeader OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (100))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 8.0R1 and replaced
         with tmnxOamPingHistoryRespHdr in tmnxOamPingHistoryTable."
    ::= { tmnxOamPingResultsEntry 13 }

tmnxOamPingResultsMinTt          OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsMinTt indicates the minimum outbound
         trip time for the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 14 }

tmnxOamPingResultsMaxTt          OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsMaxTt indicates the maximum outbound
         trip time for the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 15 }

tmnxOamPingResultsAverageTt      OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsAverageTt indicates the average
         outbound trip time for the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 16 }

tmnxOamPingResultsTtSumOfSquares OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsTtSumOfSquares indicates the least
         significant 32 bits of tmnxOamPingResultsTtHCSumSquares."
    ::= { tmnxOamPingResultsEntry 17 }

tmnxOamPingResultsMinInTt        OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsMinInTt indicates the minimum inbound
         trip time for the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 18 }

tmnxOamPingResultsMaxInTt        OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsMaxInTt indicates the maximum inbound
         trip time for the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 19 }

tmnxOamPingResultsAverageInTt    OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsAverageInTt indicates the average
         inbound trip time for the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 20 }

tmnxOamPingResultsInTtSumOfSqrs  OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsInTtSumOfSqrs indicates the least
         significant 32 bits of tmnxOamPingResultsInTtHCSumSqrs."
    ::= { tmnxOamPingResultsEntry 21 }

tmnxOamPingResultsOutJitter      OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsOutJitter indicates the amount of
         jitter in the outbound trip times for the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 22 }

tmnxOamPingResultsInJitter       OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsInJitter indicates the amount of jitter
         in the inbound trip times for the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 23 }

tmnxOamPingResultsRtJitter       OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsRtJitter indicates the amount of jitter
         in the round trip times for the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 24 }

tmnxOamPingResultsProbeTimeouts  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsProbeTimeouts indicates the number of
         probes that timed out for the specified test run."
    ::= { tmnxOamPingResultsEntry 25 }

tmnxOamPingResultsProbeFailures  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsProbeFailures indicates the total
         number of probes that failed to be transmitted plus the number of
         probes that timed out."
    ::= { tmnxOamPingResultsEntry 26 }

tmnxOamPingResultsTestRunIndex   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsTestRunIndex specifies the test run
         INDEX of the row.

         The first  run of a test is assigned run index 1.
         The second run of a test is assigned run index 2.  Etc."
    ::= { tmnxOamPingResultsEntry 27 }

tmnxOamPingResultsRttOFSumSquares OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsRttOFSumSquares indicates the number of
         times tmnxOamPingResultsRttSumOfSquares overflowed."
    ::= { tmnxOamPingResultsEntry 28 }

tmnxOamPingResultsRttHCSumSquares OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsRttHCSumSquares indicates the sum of
         squares of the round trip times for the specified test run.  Its
         purpose is to enable the standard deviation calculation.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 29 }

tmnxOamPingResultsTtOFSumSquares OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsTtOFSumSquares indicates the number of
         times tmnxOamPingResultsTtSumOfSquares overflowed."
    ::= { tmnxOamPingResultsEntry 30 }

tmnxOamPingResultsTtHCSumSquares OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsTtHCSumSquares indicates the sum of
         squares of the outbound trip times for the specified test run.  Its
         purpose is to enable the standard deviation calculation.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 31 }

tmnxOamPingResultsInTtOFSumSqrs  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsInTtOFSumSqrs indicates the number of
         times tmnxOamPingResultsInTtSumOfSqrs overflowed."
    ::= { tmnxOamPingResultsEntry 32 }

tmnxOamPingResultsInTtHCSumSqrs  OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsInTtHCSumSqrs indicates the sum of
         squares of the inbound trip times for the specified test run.  Its
         purpose is to enable the standard deviation calculation.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingResultsEntry 33 }

tmnxOamPingResultsTestRunResult  OBJECT-TYPE
    SYNTAX      TmnxOamTestResult
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsTestRunResult indicates the result of
         the specified test run."
    ::= { tmnxOamPingResultsEntry 34 }

tmnxOamPingResultsOutOfOrder     OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "reply PDUs"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingResultsOutOfOrder indicates the number of
         reply PDUs for the specified test run that have arrived out of order.

         For example, if two probes are sent during the test run (as configured
         using tmnxOamPingCtlProbeCount), and the two reply PDUs arrive out of
         order, tmnxOamPingResultsOutOfOrder is 2.

         This value is supported when tmnxOamPingCtlTestMode is 'vxlanPing'.
         Zero is returned for all other test types."
    ::= { tmnxOamPingResultsEntry 35 }

tmnxOamPingHistoryTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamPingHistoryTable contains the per-probe results for most ping
         test types.  Exceptions are noted in the tmnxOamPingCtlTestMode
         DESCRIPTION clause."
    ::= { tmnxOamPingObjs 5 }

tmnxOamPingHistoryEntry          OBJECT-TYPE
    SYNTAX      TmnxOamPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamPingHistoryEntry contains the results for one ping probe.

         The first three indices specify the corresponding
         tmnxOamPingResultsTable row.

         The fourth index specifies the probe yielding the results.

         A row is created when one of the following events occurs.
         1.  A ping echo request cannot be sent (e.g. the destination IP address
             is unknown).
         2.  A ping echo reply (triggered by a ping echo request launched by
             this node) arrives.
         3.  A timeout occurs while waiting for a ping echo reply.

         Rows are destroyed when the corresponding tmnxOamPingResultsTable row
         is destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamPingHistoryIndex
    }
    ::= { tmnxOamPingHistoryTable 1 }

TmnxOamPingHistoryEntry          ::= SEQUENCE
{
    tmnxOamPingHistoryIndex          Unsigned32,
    tmnxOamPingHistoryResponse       Unsigned32,
    tmnxOamPingHistoryOneWayTime     Integer32,
    tmnxOamPingHistorySize           Unsigned32,
    tmnxOamPingHistoryStatus         TmnxOamResponseStatus,
    tmnxOamPingHistoryTime           DateAndTime,
    tmnxOamPingHistoryReturnCode     TmnxOamPingRtnCode,
    tmnxOamPingHistorySrcIpAddress   IpAddress,
    tmnxOamPingHistAddressType       TmnxOamAddressType,
    tmnxOamPingHistSapId             TmnxStrSapId,
    tmnxOamPingHistoryVersion        Unsigned32,
    tmnxOamPingHistoryCpeMacAddr     MacAddress,
    tmnxOamPingHistoryRespSvcId      TmnxServId,
    tmnxOamPingHistorySequence       Unsigned32,
    tmnxOamPingHistoryIfIndex        InterfaceIndexOrZero,
    tmnxOamPingHistoryDataLen        Unsigned32,
    tmnxOamPingHistoryRespPlane      TmnxOamTestResponsePlane,
    tmnxOamPingHistoryReqHdr         OCTET STRING,
    tmnxOamPingHistoryRespHdr        OCTET STRING,
    tmnxOamPingHistoryDnsAddrType    InetAddressType,
    tmnxOamPingHistoryDnsAddress     InetAddress,
    tmnxOamPingHistorySrcAddrType    InetAddressType,
    tmnxOamPingHistorySrcAddress     InetAddress,
    tmnxOamPingHistoryInOneWayTime   Integer32,
    tmnxOamPingHistoryLspName        TLNamedItemOrEmpty,
    tmnxOamPingHistNextHopAddrType   InetAddressType,
    tmnxOamPingHistNextHopAddress    InetAddress,
    tmnxOamPingHistorySrcGlobalId    TmnxMplsTpGlobalID,
    tmnxOamPingHistorySrcNodeId      TmnxMplsTpNodeID,
    tmnxOamPingHistorySdpBindId      TNamedItemOrEmpty,
    tmnxOamPingHistoryRtrnSubcode    Unsigned32,
    tmnxOamPingHistoryNetworkIfName  TNamedItemOrEmpty
}

tmnxOamPingHistoryIndex          OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryIndex specifies the probe which yielded
         the results in this row.

         For example:
         1.  For a unicast ping test with a send-count of 10, the row with
             tmnxOamPingHistoryIndex=10 has the result of the last probe to be
             sent.
         2.  For a multicast ping test with 10 destinations, the row with
             tmnxOamPingHistoryIndex=10 has the result for the last destination
             to be pinged."
    ::= { tmnxOamPingHistoryEntry 1 }

tmnxOamPingHistoryResponse       OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryResponse indicates the round trip time
         for the specified probe.

         Zero is returned when the information is not available (e.g. the probe
         timed out)."
    ::= { tmnxOamPingHistoryEntry 2 }

tmnxOamPingHistoryOneWayTime     OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryOneWayTime indicates the outbound trip
         time for the specified probe.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingHistoryEntry 3 }

tmnxOamPingHistorySize           OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistorySize indicates the size of the OAM echo
         request transmitted for this OAM probe.  Zero is returned if no probe
         was transmitted.

         When tmnxOamPingCtlTestMode is 'ethCfmLoopback', 'ethCfmTwoWayDelay',
         or 'ethCfmTwoWaySlm' the value returned is the size of the transmitted
         layer 2 frame (including the layer 2 header, but excluding the IEEE
         802.1Q Tag field(s)).

         For other tmnxOamPingCtlTestMode values, the size returned is the
         tmnxOamPingCtlSize value."
    REFERENCE
        "IEEE Std 802.1Q-2011, 'Media Access Control (MAC) Bridges and Virtual
         Bridge Local Area Networks', 31 August 2011, Section 9.3 'Tag format'"
    ::= { tmnxOamPingHistoryEntry 4 }

tmnxOamPingHistoryStatus         OBJECT-TYPE
    SYNTAX      TmnxOamResponseStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryStatus indicates the outcome of the
         probe.  Example values:  'responseReceived', 'requestTimedOut'."
    ::= { tmnxOamPingHistoryEntry 5 }

tmnxOamPingHistoryTime           OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryTime indicates the date and time when
         the outcome of the specified probe was determined."
    ::= { tmnxOamPingHistoryEntry 6 }

tmnxOamPingHistoryReturnCode     OBJECT-TYPE
    SYNTAX      TmnxOamPingRtnCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryReturnCode indicates the OAM return
         code received in the probe response.

         For a 'bierPing' test, 'notApplicable(0)' is returned.  The probe's
         return code can be read using tmnxOamBierPingHistoryReturnCode."
    ::= { tmnxOamPingHistoryEntry 7 }

tmnxOamPingHistorySrcIpAddress   OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamPingHistorySrcAddrType and
         tmnxOamPingHistorySrcAddress."
    ::= { tmnxOamPingHistoryEntry 8 }

tmnxOamPingHistAddressType       OBJECT-TYPE
    SYNTAX      TmnxOamAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistAddressType indicates the type of binding
         address information returned in response to the specified probe.

         'unknown(0)' is returned when the information is not available."
    ::= { tmnxOamPingHistoryEntry 9 }

tmnxOamPingHistSapId             OBJECT-TYPE
    SYNTAX      TmnxStrSapId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistSapId is the name of the access port of
         the SAP supporting the requests returned in response to a 'cpePing',
         'mfibPing', or 'vprnPing' probe.

         If the value of tmnxOamPingHistAddressType is not 'sapId', this object
         is not relevant and MUST have a null string ''."
    ::= { tmnxOamPingHistoryEntry 10 }

tmnxOamPingHistoryVersion        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryVersion indicates the protocol version
         for this OAM ping probe reply."
    ::= { tmnxOamPingHistoryEntry 12 }

tmnxOamPingHistoryCpeMacAddr     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryCpeMacAddr indicates the MAC address of
         the replying CPE for this OAM ping probe reply.

         The object is applicable to 'cpePing' tests only.

         If the information is unavailable, '0:0:0:0:0:0' is returned."
    ::= { tmnxOamPingHistoryEntry 13 }

tmnxOamPingHistoryRespSvcId      OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value tmnxOamPingHistoryRespSvcId indicates for an 'mfibPing' the
         service id to which the SAP responding to the 'mfibPing' probe
         belongs. If the indicated SAP is part of the same service originating
         the probe, this value is set to 0.

         For other types of probes, this value is insignificant and is set to
         0."
    ::= { tmnxOamPingHistoryEntry 14 }

tmnxOamPingHistorySequence       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value tmnxOamPingHistorySequence indicates this probe's
         sequence number.  If a probe response was received, this object
         indicates the sequence number of the response."
    ::= { tmnxOamPingHistoryEntry 15 }

tmnxOamPingHistoryIfIndex        OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryIfIndex indicates the ifIndex of the
         interface that this probe was transmitted from.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingHistoryEntry 16 }

tmnxOamPingHistoryDataLen        OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryDataLen indicates for an 'lspPing'
         the UDP data length of the echo reply, and for 'icmpPing' normally
         the length starting after the IP header of the echo reply.  For
         'ethCfmLoopback' and 'ethCfmTwoWaySlm' the value is the number of
         octets in the Value field of the Data TLV of the Ethernet CFM loopback
         packet (zero if the packet has no Data TLV).

         For other types of probes, this value is not significant and is set to
         0."
    ::= { tmnxOamPingHistoryEntry 17 }

tmnxOamPingHistoryRespPlane      OBJECT-TYPE
    SYNTAX      TmnxOamTestResponsePlane
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryRespPlane indicates the response plane
         from which this ping response was received."
    ::= { tmnxOamPingHistoryEntry 18 }

tmnxOamPingHistoryReqHdr         OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0|1..150))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS release 10.0 R1."
    ::= { tmnxOamPingHistoryEntry 19 }

tmnxOamPingHistoryRespHdr        OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0|1..150))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryRespHdr is a copy of the OAM header of
         the response packet received for this OAM ping test probe.

         The response header is reported only when tmnxOamPingCtlTestMode
         has a value of
             'ethCfmLoopback',
             'ethCfmTwoWayDelay',
             'ethCfmTwoWaySlm',
             'icmpPing',
             'mtuPing',
             'sdpPing', or
             'svcPing'.

         Otherwise, a zero length OCTET STRING is returned.  For 'icmpPing'
         the value reported is the received ICMP message starting from the IP
         header.

         The value of this object MUST be reported as a zero length OCTET
         STRING when no probe response has been received."
    ::= { tmnxOamPingHistoryEntry 20 }

tmnxOamPingHistoryDnsAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryDnsAddrType indicates the Internet
         address type stored in tmnxOamPingHistoryDnsAddress.

         If this was not a 'dnsPing' test or the DNS name specified in
         tmnxOamPingCtlDnsName could not be resolved, the value of this object
         will be reported as 'unknown(0)'."
    ::= { tmnxOamPingHistoryEntry 21 }

tmnxOamPingHistoryDnsAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryDnsAddress indicates the Internet
         address that was resolved from the name specified in
         tmnxOamPingCtlDnsName by a 'dnsPing' test.

         If this was not a 'dnsPing' test or the DNS name specified in
         tmnxOamPingCtlDnsName could not be resolved, the value of this object
         will be reported as ''H (empty string)."
    ::= { tmnxOamPingHistoryEntry 22 }

tmnxOamPingHistorySrcAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistorySrcAddrType indicates the Internet
         address type of the address stored in tmnxOamPingHistorySrcAddress."
    ::= { tmnxOamPingHistoryEntry 23 }

tmnxOamPingHistorySrcAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistorySrcAddress indicates the Internet
         address of the remote node targeted by the specified ping probe.

         In the case of a 'bierPing' test, the remote node's address can be
         read using tmnxOamBierPingHistoryBfrPfx."
    ::= { tmnxOamPingHistoryEntry 24 }

tmnxOamPingHistoryInOneWayTime   OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryInOneWayTime indicates the inbound trip
         time for the specified probe response.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamPingHistoryEntry 25 }

tmnxOamPingHistoryLspName        OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryLspName indicates the name of the LSP
         that this probe was transmitted on.

         The empty string is returned when the test mode is not 'vccvPing'. The
         empty string is returned when the transport tunnel is not RSVP."
    ::= { tmnxOamPingHistoryEntry 26 }

tmnxOamPingHistNextHopAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistNextHopAddrType indicates the Internet
         address type of the address stored in tmnxOamPingHistNextHopAddress.

         The value 'unknown(0)' is returned when the test mode is not
         'vccvPing'."
    ::= { tmnxOamPingHistoryEntry 27 }

tmnxOamPingHistNextHopAddress    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistNextHopAddress indicates the next hop
         Internet address that this probe was transmitted to.

         The empty string is returned when the test mode is not 'vccvPing'."
    ::= { tmnxOamPingHistoryEntry 28 }

tmnxOamPingHistorySrcGlobalId    OBJECT-TYPE
    SYNTAX      TmnxMplsTpGlobalID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistorySrcGlobalId indicates the source MPLS-TP
         global identifier of the replying node.  The value is copied from the
         reply's RFC 6426 Source Identifier TLV.  If the TLV is absent, zero is
         returned.

         This value is relevant when tmnxOamPingCtlTestMode is 'lspPing' or
         'vccvPing'.  Otherwise, zero is returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.2.2, 'Source Identifier TLV'."
    ::= { tmnxOamPingHistoryEntry 29 }

tmnxOamPingHistorySrcNodeId      OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistorySrcNodeId indicates the source MPLS-TP
         node identifier of the replying node.  The value is copied from the
         reply's RFC 6426 Source Identifier TLV.  If the TLV is absent, zero is
         returned.

         This value is relevant when tmnxOamPingCtlTestMode is 'lspPing' or
         'vccvPing'.  Otherwise, zero is returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.2.2, 'Source Identifier TLV'."
    ::= { tmnxOamPingHistoryEntry 30 }

tmnxOamPingHistorySdpBindId      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistorySdpBindId indicates the SDP binding
         provided by the remote system.

         The value of tmnxOamPingHistorySdpBindId is relevant when
         tmnxOamPingHistAddressType is 'sdpBindId(9)'."
    ::= { tmnxOamPingHistoryEntry 31 }

tmnxOamPingHistoryRtrnSubcode    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryRtrnSubcode indicates the value present
         in an MPLS echo reply's RFC 4379 Return Subcode (RSC) field.

         A valid value is returned when the test has a tmnxOamPingCtlTestMode
         value of 'lspPing'.  Otherwise, zero is returned."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.1, 'Return Codes'."
    ::= { tmnxOamPingHistoryEntry 32 }

tmnxOamPingHistoryNetworkIfName  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamPingHistoryNetworkIfName indicates the network
         interface name provided by the replying node.

         Network interface names are configured using
         TIMETRA-VRTR-MIB::vRtrIfName.

         The value of this object is the empty string when the value of
         tmnxOamPingHistAddressType is not 'networkInterface(11)'."
    ::= { tmnxOamPingHistoryEntry 33 }

tmnxOamMacPingCtlTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMacPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMacPingCtlTable contains configuration information for
         'macPing', 'macPopulate', and 'macPurge' tests."
    ::= { tmnxOamPingObjs 6 }

tmnxOamMacPingCtlEntry           OBJECT-TYPE
    SYNTAX      TmnxOamMacPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMacPingCtlEntry contains configuration information for one
         'macPing', 'macPopulate', or 'macPurge' test.

         SROS creates a row when tmnxOamPingCtlTestMode is set to 'macPing',
         'macPopulate', or 'macPurge'.

         SROS destroys a row when the corresponding tmnxOamPingCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamMacPingCtlTable 1 }

TmnxOamMacPingCtlEntry           ::= SEQUENCE
{
    tmnxOamMacPingCtlTargetMacAddr   MacAddress,
    tmnxOamMacPingCtlSourceMacAddr   MacAddress,
    tmnxOamMacPingCtlSendControl     TruthValue,
    tmnxOamMacPingCtlReplyControl    TruthValue,
    tmnxOamMacPingCtlTtl             Unsigned32,
    tmnxOamMacPingCtlRegister        TruthValue,
    tmnxOamMacPingCtlFlood           TruthValue,
    tmnxOamMacPingCtlForce           TruthValue,
    tmnxOamMacPingCtlAge             Unsigned32,
    tmnxOamMacPingCtlSapPortId       TmnxPortID,
    tmnxOamMacPingCtlSapEncapValue   TmnxEncapVal,
    tmnxOamMacPingCtlFibEntryName    TNamedItemOrEmpty
}

tmnxOamMacPingCtlTargetMacAddr   OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingCtlTargetMacAddr is a 6-octet value that
         specifies the target MAC address to be used in the query request for
         performing an OAM ping operation.

         This parameter is required."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.9"
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamMacPingCtlEntry 1 }

tmnxOamMacPingCtlSourceMacAddr   OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingCtlSourceMacAddr is a 6-octet value
         that specifies the MAC address to be used as the source in the
         query request for performing an OAM ping operation.  This object
         is optional and is not relevant when tmnxOamPingCtlTestMode has a
         value other than 'macPing'."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.9"
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamMacPingCtlEntry 2 }

tmnxOamMacPingCtlSendControl     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingCtlSendControl specifies whether the
         outbound OAM ping packet will use the data plane or the control plane.

         When the value is 'false', the packet is sent using the data plane.

         As of SROS release 13.0 R1, a test cannot be started if
         tmnxOamMacPingCtlSendControl is 'true'.  A test is started using
         tmnxOamPingCtlAdminStatus.

         This object will be marked obsolete in a future release."
    DEFVAL      { false }
    ::= { tmnxOamMacPingCtlEntry 3 }

tmnxOamMacPingCtlReplyControl    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamMacPingCtlReplyControl is 'true', the OAM
         ping response is returned using the control plane. If its value is
         'false', the packet is sent via the data plane. This object is
         optional and is not relevant when tmnxOamPingCtlTestMode has a value
         other than 'macPing'."
    DEFVAL      { false }
    ::= { tmnxOamMacPingCtlEntry 4 }

tmnxOamMacPingCtlTtl             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the vc-label time-to-live value.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'macPing'.

         While performing the test with a TTL of 1 no responses should ever be
         expected."
    DEFVAL      { 255 }
    ::= { tmnxOamMacPingCtlEntry 5 }

tmnxOamMacPingCtlRegister        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamMacPingCtlRegister is 'true', the OAM ping
         request is transmitted that causes each upstream node to delete the
         MAC address only from its forwarding plane but keep it in its control
         plane in order to inhibit dynamic learning. If its value is 'false',
         the MAC address is deleted from both the forwarding and control
         planes.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'macPurge'."
    DEFVAL      { false }
    ::= { tmnxOamMacPingCtlEntry 6 }

tmnxOamMacPingCtlFlood           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamMacPingCtlFlood is 'true', the OAM ping
         request is transmitted that causes each upstream node to add or delete
         the MAC address. If its value is 'false', the operation is performed
         locally.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'macPopulate' or
         'macPurge'."
    DEFVAL      { false }
    ::= { tmnxOamMacPingCtlEntry 7 }

tmnxOamMacPingCtlForce           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingCtlForce specifies whether or not to add an
         override to the test.

         When tmnxOamPingCtlTestMode is 'macPopulate' and
         tmnxOamMacPingCtlForce is 'true', the MAC type (i.e.
         TIMETRA-SERV-MIB::tlsFdbType) of the FIB entry specified by the test
         parameters is set to 'oam', regardless of its earlier value.

         When tmnxOamPingCtlTestMode is 'macPurge' and tmnxOamMacPingCtlForce
         is 'true', the FIB entry specified by the test parameters is purged,
         even if the requesting node did not populate the entry.

         When tmnxOamPingCtlTestMode is 'macPing', tmnxOamMacPingCtlForce is
         irrelevant."
    DEFVAL      { false }
    ::= { tmnxOamMacPingCtlEntry 8 }

tmnxOamMacPingCtlAge             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingCtlAge specifies the number of seconds to
         age this OAM MAC address in the FIB.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'macPopulate'."
    DEFVAL      { 3600 }
    ::= { tmnxOamMacPingCtlEntry 9 }

tmnxOamMacPingCtlSapPortId       OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingCtlSapPortId is the ID of the access port
         of the target SAP.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'macPopulate'."
    DEFVAL      { 0 }
    ::= { tmnxOamMacPingCtlEntry 10 }

tmnxOamMacPingCtlSapEncapValue   OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingCtlSapEncapValue is the label used to
         identify the target SAP on the port specified in
         tmnxOamMacPingCtlSapPortId.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'macPopulate'."
    DEFVAL      { 0 }
    ::= { tmnxOamMacPingCtlEntry 11 }

tmnxOamMacPingCtlFibEntryName    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 11.0 R1."
    DEFVAL      { ''H }
    ::= { tmnxOamMacPingCtlEntry 12 }

tmnxOamMacPingHistoryTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMacPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'macPing' probe
         operation.

         An entry in this table is created when the result of an OAM 'macPing'
         probe is determined.

         An entry is removed from this table when its corresponding
         tmnxOamPingResultsEntry is deleted."
    ::= { tmnxOamPingObjs 7 }

tmnxOamMacPingHistoryEntry       OBJECT-TYPE
    SYNTAX      TmnxOamMacPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamMacPingHistoryTable.  The first two
         index elements identify the tmnxOamPingCtlEntry that a
         tmnxOamMacPingHistoryEntry belongs to.  The third index identifies
         a specific run of the OAM test.  The fourth index element
         selects the group of responses associated with a specific probe
         attempt.  The fifth index selects a single OAM 'macPing' reply."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamMacPingHistoryIndex,
        tmnxOamMacPingReplyIndex
    }
    ::= { tmnxOamMacPingHistoryTable 1 }

TmnxOamMacPingHistoryEntry       ::= SEQUENCE
{
    tmnxOamMacPingHistoryIndex       Unsigned32,
    tmnxOamMacPingReplyIndex         Unsigned32,
    tmnxOamMacPingHistoryResponse    Unsigned32,
    tmnxOamMacPingHistoryOneWayTime  Integer32,
    tmnxOamMacPingHistoryStatus      TmnxOamResponseStatus,
    tmnxOamMacPingHistoryTime        DateAndTime,
    tmnxOamMacPingHistoryReturnCode  TmnxOamPingRtnCode,
    tmnxOamMacPingHistorySrcIpAddress IpAddress,
    tmnxOamMacPingHistoryAddressType TmnxOamAddressType,
    tmnxOamMacPingHistorySapId       TmnxStrSapId,
    tmnxOamMacPingHistorySdpId       SdpId,
    tmnxOamMacPingHistoryAdminStatus TruthValue,
    tmnxOamMacPingHistoryOperStatus  TruthValue,
    tmnxOamMacPingHistoryResponsePlane TmnxOamTestResponsePlane,
    tmnxOamMacPingHistorySize        Unsigned32,
    tmnxOamMacPingHistoryInOneWayTime Integer32,
    tmnxOamMacPingHistorySrcAddrType InetAddressType,
    tmnxOamMacPingHistorySrcAddress  InetAddress
}

tmnxOamMacPingHistoryIndex       OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in this table is created when the result of a OAM
         'macPing' probe is determined.  The initial 2 instance identifier
         index values identify the tmnxOamPingCtlEntry that a OAM probe
         result (tmnxOamMacPingHistoryEntry) belongs to.  The
         tmnxOamMacPingHistoryIndex has the value of the sequence number
         of the request probe and identifies a group of replies received
         in response to a specific probe transmission.

         The agent starts assigning tmnxOamMacPingHistoryIndex values at 1 and
         wraps after exceeding the maximum possible value as defined by the
         limit of this object."
    ::= { tmnxOamMacPingHistoryEntry 1 }

tmnxOamMacPingReplyIndex         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamMacPingReplyIndex is unique within a group of responses
         received as the result of a OAM 'macPing' probe as specified by having
         the same value for tmnxOamMacPingHistoryIndex.

         The agent starts assigning tmnxOamMacPingReplyIndex values at 1 and
         wraps after exceeding the maximum possible value as defined by the
         limit of this object."
    ::= { tmnxOamMacPingHistoryEntry 2 }

tmnxOamMacPingHistoryResponse    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of time measured in microseconds from when
         a OAM probe was sent to when its response was received or
         when it timed out.  The value of this object is reported
         as 0 when it is not possible to transmit an OAM probe."
    ::= { tmnxOamMacPingHistoryEntry 3 }

tmnxOamMacPingHistoryOneWayTime  OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of time measured in microseconds from when an
         OAM probe was sent to when it was received by the replier
         (outbound one-way time).  The value of this object is
         reported as 0 when it is not possible to transmit an OAM
         probe or the information is not available."
    ::= { tmnxOamMacPingHistoryEntry 4 }

tmnxOamMacPingHistoryStatus      OBJECT-TYPE
    SYNTAX      TmnxOamResponseStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistoryStatus is an enumerated integer that
         indicates the result of a particular OAM probe."
    ::= { tmnxOamMacPingHistoryEntry 5 }

tmnxOamMacPingHistoryTime        OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Timestamp for when this OAM probe result was determined."
    ::= { tmnxOamMacPingHistoryEntry 6 }

tmnxOamMacPingHistoryReturnCode  OBJECT-TYPE
    SYNTAX      TmnxOamPingRtnCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistoryReturnCode is an enumerated integer
         that indicates the return code received in the OAM ping response."
    ::= { tmnxOamMacPingHistoryEntry 7 }

tmnxOamMacPingHistorySrcIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMacPingHistorySrcAddrType and
         tmnxOamMacPingHistorySrcAddress."
    ::= { tmnxOamMacPingHistoryEntry 8 }

tmnxOamMacPingHistoryAddressType OBJECT-TYPE
    SYNTAX      TmnxOamAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistoryAddressType indicates the type of
         binding address information returned in response to a 'macPing' test."
    ::= { tmnxOamMacPingHistoryEntry 9 }

tmnxOamMacPingHistorySapId       OBJECT-TYPE
    SYNTAX      TmnxStrSapId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistorySapId is the name of the access port
         of the SAP supporting the requested MAC address returned in response
         to a 'macPing' probe.

         If the value of tmnxOamMacPingHistoryAddressType is not 'sapId', this
         object is not relevant and MUST have a null string ''."
    ::= { tmnxOamMacPingHistoryEntry 10 }

tmnxOamMacPingHistorySdpId       OBJECT-TYPE
    SYNTAX      SdpId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistorySdpId is the ID of the SDP
         supporting the requested MAC address returned in response to a
         'macPing' probe.

         If the value of tmnxOamMacPingHistoryAddressType is not 'sdpId', this
         object is not relevant and MUST return a value of '0'."
    ::= { tmnxOamMacPingHistoryEntry 12 }

tmnxOamMacPingHistoryAdminStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistoryAdminStatus indicates the current
         administrative state of the SAP or SDP ID returned in response to a
         'macPing' test.  A value of 'true' indicates the SAP or SDP is
         administratively 'up'.

         The value of this object MUST be reported as 'false' when no ping
         responses have been received or an active test has not yet timed out."
    ::= { tmnxOamMacPingHistoryEntry 13 }

tmnxOamMacPingHistoryOperStatus  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistoryOperStatus indicates the current
         operational state of the SAP or SDP ID returned in response to a
         'macPing' test.  A value of 'true' indicates the SAP or SDP is
         operationally 'up'.

         The value of this object MUST be reported as 'false' when no ping
         responses have been received or an active test has not yet timed out."
    ::= { tmnxOamMacPingHistoryEntry 14 }

tmnxOamMacPingHistoryResponsePlane OBJECT-TYPE
    SYNTAX      TmnxOamTestResponsePlane
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistoryResponsePlane indicates the response
         plane from which this ping response was received."
    ::= { tmnxOamMacPingHistoryEntry 15 }

tmnxOamMacPingHistorySize        OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistorySize indicates the size in octets
         of the user payload in a ping request packet.  It does not include
         the service encapsulation."
    ::= { tmnxOamMacPingHistoryEntry 16 }

tmnxOamMacPingHistoryInOneWayTime OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of time measured in microseconds from when an OAM
         probe reply was sent to when it was received by this host
         (inbound one-way time).  The value of this object is reported
         as 0 when the information is not available."
    ::= { tmnxOamMacPingHistoryEntry 17 }

tmnxOamMacPingHistorySrcAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistorySrcAddrType indicates the Internet
         address type stored in tmnxOamMacPingHistorySrcAddress."
    ::= { tmnxOamMacPingHistoryEntry 18 }

tmnxOamMacPingHistorySrcAddress  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacPingHistorySrcAddress indicates the Internet
         address of the remote node that generated this reply to a OAM probe."
    ::= { tmnxOamMacPingHistoryEntry 19 }

tmnxOamMacPingL2MapTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMacPingL2MapEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamPingObjs 8 }

tmnxOamMacPingL2MapEntry         OBJECT-TYPE
    SYNTAX      TmnxOamMacPingL2MapEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamMacPingHistoryIndex,
        tmnxOamMacPingReplyIndex,
        tmnxOamMacPingL2MapIndex
    }
    ::= { tmnxOamMacPingL2MapTable 1 }

TmnxOamMacPingL2MapEntry         ::= SEQUENCE
{
    tmnxOamMacPingL2MapIndex         Unsigned32,
    tmnxOamMacPingL2MapRouterID      IpAddress,
    tmnxOamMacPingL2MapLabel         MplsLabel,
    tmnxOamMacPingL2MapProtocol      TmnxOamSignalProtocol,
    tmnxOamMacPingL2MapVCType        TmnxOamVcType,
    tmnxOamMacPingL2MapVCID          TmnxVcId,
    tmnxOamMacPingL2MapDirection     INTEGER
}

tmnxOamMacPingL2MapIndex         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamMacPingL2MapEntry 1 }

tmnxOamMacPingL2MapRouterID      OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamMacPingL2MapEntry 2 }

tmnxOamMacPingL2MapLabel         OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamMacPingL2MapEntry 3 }

tmnxOamMacPingL2MapProtocol      OBJECT-TYPE
    SYNTAX      TmnxOamSignalProtocol
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamMacPingL2MapEntry 4 }

tmnxOamMacPingL2MapVCType        OBJECT-TYPE
    SYNTAX      TmnxOamVcType
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamMacPingL2MapEntry 5 }

tmnxOamMacPingL2MapVCID          OBJECT-TYPE
    SYNTAX      TmnxVcId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamMacPingL2MapEntry 6 }

tmnxOamMacPingL2MapDirection     OBJECT-TYPE
    SYNTAX      INTEGER {
        upstream   (1),
        downstream (2)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.1."
    ::= { tmnxOamMacPingL2MapEntry 7 }

tmnxOamLspPingCtlTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLspPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row in tmnxOamLspPingCtlTable contains the LSP-specific
         configuration information needed to launch an LSP (Label Switched Path)
         ping test.  The rest of the configuration information needed to launch
         the test resides in the corresponding row of tmnxOamPingCtlTable.

         Seven types of LSP ping tests are supported.  An abbreviated name for
         each test type is defined in the following table (for use in a
         subsequent table).  The test type's tmnxOamLspPingCtlTestSubMode code
         point is shown as well.

         Test Sub Mode           Abbreviated Test Type Name(s)
         ---------------------   -------------------------------
         'unspecified     (1)'   LDP, RSVP
         'static          (2)'   TPST (Transport Profile Static)
         'bgpLabeledPrefix(3)'   BGP
         'srIsis          (4)'   ISIS
         'srOspf          (5)'   OSPF
         'srTe            (6)'   SRTE
         'srPolicy        (7)'   SRPL
         'srOspf3         (8)'   OSP3

         The following table has a row for each LSP ping test type, showing the
         mandatory and optional objects applicable to the test type.

         Test
         Type   Mandatory Objects               Optional Objects
         ---- -------------------------------- ---------------------------------
         BGP  tmnxOamLspPingCtlLdpPrefixType   *tmnxOamLspPingCtlNhAddressType
              tmnxOamLspPingCtlLdpPrefix       *tmnxOamLspPingCtlNhAddress
              tmnxOamLspPingCtlLdpPrefixLen     tmnxOamLspPingCtlNhIntfName
              tmnxOamLspPingCtlTestSubMode     #tmnxOamLspPingCtlPathDestType
                                               #tmnxOamLspPingCtlPathDest

         ISIS tmnxOamLspPingCtlLdpPrefixType    tmnxOamLspPingCtlIgpInstance
              tmnxOamLspPingCtlLdpPrefix       *tmnxOamLspPingCtlNhAddressType
              tmnxOamLspPingCtlLdpPrefixLen    *tmnxOamLspPingCtlNhAddress
              tmnxOamLspPingCtlTestSubMode      tmnxOamLspPingCtlNhIntfName
                                               #tmnxOamLspPingCtlPathDestType
                                               #tmnxOamLspPingCtlPathDest

         LDP  tmnxOamLspPingCtlLdpPrefixType   *tmnxOamLspPingCtlNhAddressType
              tmnxOamLspPingCtlLdpPrefix       *tmnxOamLspPingCtlNhAddress
              tmnxOamLspPingCtlLdpPrefixLen     tmnxOamLspPingCtlNhIntfName
                                               #tmnxOamLspPingCtlPathDestType
                                               #tmnxOamLspPingCtlPathDest

         OSPF tmnxOamLspPingCtlLdpPrefixType    tmnxOamLspPingCtlIgpInstance
              tmnxOamLspPingCtlLdpPrefix       *tmnxOamLspPingCtlNhAddressType
              tmnxOamLspPingCtlLdpPrefixLen    *tmnxOamLspPingCtlNhAddress
              tmnxOamLspPingCtlTestSubMode      tmnxOamLspPingCtlNhIntfName
                                               #tmnxOamLspPingCtlPathDestType
                                               #tmnxOamLspPingCtlPathDest

         OSP3 tmnxOamLspPingCtlLdpPrefixType    tmnxOamLspPingCtlIgpInstance
              tmnxOamLspPingCtlLdpPrefix       *tmnxOamLspPingCtlNhAddressType
              tmnxOamLspPingCtlLdpPrefixLen    *tmnxOamLspPingCtlNhAddress
              tmnxOamLspPingCtlTestSubMode      tmnxOamLspPingCtlNhIntfName
                                               #tmnxOamLspPingCtlPathDestType
                                               #tmnxOamLspPingCtlPathDest

         RSVP tmnxOamLspPingCtlLspName          tmnxOamLspPingCtlPathName

         SRPL tmnxOamLspPingCtlSrPlcyColor      tmnxOamLspPingCtlSrPlcySegList
              tmnxOamLspPingCtlSrPlcyEndPtAddr
              tmnxOamLspPingCtlSrPlcyEndPtAddT
              tmnxOamLspPingCtlTestSubMode

         SRTE tmnxOamLspPingCtlLspName         *tmnxOamLspPingCtlNhAddressType
              tmnxOamLspPingCtlTestSubMode     *tmnxOamLspPingCtlNhAddress
                                                tmnxOamLspPingCtlNhIntfName
                                               #tmnxOamLspPingCtlPathDestType
                                               #tmnxOamLspPingCtlPathDest
                                                tmnxOamLspPingCtlPathName

         TPST tmnxOamLspPingCtlLspName          tmnxOamLspPingCtlAssocChannel
              tmnxOamLspPingCtlTestSubMode      tmnxOamLspPingCtlForce
                                               *tmnxOamLspPingCtlMplsTpGlobalId
                                               *tmnxOamLspPingCtlMplsTpNodeId
                                                tmnxOamLspPingCtlMplsTpPathType

         ALL  none                              tmnxOamLspPingCtlTtl
                                                tmnxOamPingCtlFcName
                                                tmnxOamPingCtlInterval
                                                tmnxOamPingCtlProbeCount
                                                tmnxOamPingCtlProfile
                                                tmnxOamPingCtlSize
                                               *tmnxOamPingCtlSrcAddrType
                                               *tmnxOamPingCtlSrcAddress
                                                tmnxOamPingCtlTimeOut
         ---- -------------------------------- ---------------------------------

         In the table above,
         1.  The optional objects in the ALL row apply to all LSP ping test
             types.
         2.  Asterisks (*) mark a set of optional objects which must all be
             specified, or must all be unspecified.
         3.  Octothorpes (#) mark a separate set of optional objects which must
             all be specified, or must all be unspecified.
         4.  There are four supported combinations of
             tmnxOamLspPingCtlNhAddressType, tmnxOamLspPingCtlNhAddress,
             tmnxOamLspPingCtlNhIntfName, tmnxOamLspPingCtlPathDestType, and
             tmnxOamLspPingCtlPathDest, as follows:
             a) all unspecified
             b) tmnxOamLspPingCtlPathDestType and tmnxOamLspPingCtlPathDest
             c) tmnxOamLspPingCtlPathDestType, tmnxOamLspPingCtlPathDest, and
                tmnxOamLspPingCtlNhIntfName
             d) tmnxOamLspPingCtlPathDestType, tmnxOamLspPingCtlPathDest,
                tmnxOamLspPingCtlNhAddressType, and tmnxOamLspPingCtlNhAddress

         When an object combination other than a combination listed above is
         specified, values will be rejected or ignored, or the test will fail."
    REFERENCE
        "IETF draft-ietf-mpls-spring-lsp-ping-00, 'Label Switched Path (LSP)
         Ping/Trace for Segment Routing Networks Using MPLS Dataplane'.
         RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing'.
         IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.1, 'Identification of an SR Policy'."
    ::= { tmnxOamPingObjs 9 }

tmnxOamLspPingCtlEntry           OBJECT-TYPE
    SYNTAX      TmnxOamLspPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The system creates a row in tmnxOamLspPingCtlTable when
         tmnxOamPingCtlTestMode is set to 'lspPing'.

         The system deletes a row in tmnxOamLspPingCtlTable when the
         corresponding row in tmnxOamPingCtlTable is deleted."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamLspPingCtlTable 1 }

TmnxOamLspPingCtlEntry           ::= SEQUENCE
{
    tmnxOamLspPingCtlVRtrID          TmnxVRtrID,
    tmnxOamLspPingCtlLspName         TLNamedItemOrEmpty,
    tmnxOamLspPingCtlReturnLsp       TNamedItemOrEmpty,
    tmnxOamLspPingCtlTtl             Unsigned32,
    tmnxOamLspPingCtlPathName        TLNamedItemOrEmpty,
    tmnxOamLspPingCtlLdpIpPrefix     IpAddress,
    tmnxOamLspPingCtlLdpIpPrefixLen  IpAddressPrefixLength,
    tmnxOamLspPingCtlLdpPrefixType   InetAddressType,
    tmnxOamLspPingCtlLdpPrefix       InetAddress,
    tmnxOamLspPingCtlLdpPrefixLen    InetAddressPrefixLength,
    tmnxOamLspPingCtlPathDestType    InetAddressType,
    tmnxOamLspPingCtlPathDest        InetAddress,
    tmnxOamLspPingCtlNhIntfName      TNamedItemOrEmpty,
    tmnxOamLspPingCtlNhAddressType   InetAddressType,
    tmnxOamLspPingCtlNhAddress       InetAddress,
    tmnxOamLspPingCtlTestSubMode     TmnxOamLspTestSubMode,
    tmnxOamLspPingCtlMplsTpPathType  TmnxOamMplsTpPathType,
    tmnxOamLspPingCtlMplsTpGlobalId  TmnxMplsTpGlobalID,
    tmnxOamLspPingCtlMplsTpNodeId    TmnxMplsTpNodeID,
    tmnxOamLspPingCtlAssocChannel    TmnxOamLspAssocChannel,
    tmnxOamLspPingCtlForce           TruthValue,
    tmnxOamLspPingCtlIgpInstance     TmnxIgpInstance,
    tmnxOamLspPingCtlSrPlcyColor     Unsigned32,
    tmnxOamLspPingCtlSrPlcyEndPtAddT InetAddressType,
    tmnxOamLspPingCtlSrPlcyEndPtAddr InetAddress,
    tmnxOamLspPingCtlSrPlcySegList   Unsigned32
}

tmnxOamLspPingCtlVRtrID          OBJECT-TYPE
    SYNTAX      TmnxVRtrID
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.0R15 and replaced
         with tmnxOamPingCtlVRtrID in tmnxOamPingCtlTable."
    DEFVAL      { 1 }
    ::= { tmnxOamLspPingCtlEntry 1 }

tmnxOamLspPingCtlLspName         OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlLspName specifies the name of the LSP
         for this LSP ping test.

         When the test is started, if this name is not empty, there must be a
         TIMETRA-MPLS-MIB::vRtrMplsLspTable row with:
         1.  tmnxOamLspPingCtlLspName equal to
             TIMETRA-MPLS-MIB::vRtrMplsLspName, AND
         2.  TIMETRA-VRTR-MIB::vRtrID equal to 1, AND
         3.  TIMETRA-MPLS-MIB::vRtrMplsLspType equal to 'dynamic(2)',
             'bypassOnly(4)', or 'mplsTp(7)'.
         Otherwise, the test will fail.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 2 }

tmnxOamLspPingCtlReturnLsp       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 3 }

tmnxOamLspPingCtlTtl             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlTtl specifies the outermost label time-
         to-live value.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { 255 }
    ::= { tmnxOamLspPingCtlEntry 4 }

tmnxOamLspPingCtlPathName        OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlPathName specifies the name of the Path
         (LSP) for this LSP ping test.

         When the test is started, if this name is not empty, there must be a
         matching name in the column MPLS-TE-MIB::mplsTunnelName.  Otherwise,
         the test will fail.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 5 }

tmnxOamLspPingCtlLdpIpPrefix     OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamLspPingCtlLdpPrefixType and
         tmnxOamLspPingCtlLdpPrefix."
    DEFVAL      { '00000000'H }
    ::= { tmnxOamLspPingCtlEntry 6 }

tmnxOamLspPingCtlLdpIpPrefixLen  OBJECT-TYPE
    SYNTAX      IpAddressPrefixLength
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         the InetAddress object tmnxOamLspPingCtlLdpPrefixLen."
    DEFVAL      { 32 }
    ::= { tmnxOamLspPingCtlEntry 7 }

tmnxOamLspPingCtlLdpPrefixType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlLdpPrefixType specifies the type of
         Internet address stored in tmnxOamLspPingCtlLdpPrefix.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspPingCtlEntry 8 }

tmnxOamLspPingCtlLdpPrefix       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlLdpPrefix, along with
         tmnxOamLspPingCtlLdpPrefixType and tmnxOamLspPingCtlLdpPrefixLen,
         specifies the destination prefix for this LSP ping test.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 9 }

tmnxOamLspPingCtlLdpPrefixLen    OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    UNITS       "bits"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlLdpPrefixLen specifies the Internet
         address prefix length of tmnxOamLspPingCtlLdpPrefix.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { 32 }
    ::= { tmnxOamLspPingCtlEntry 10 }

tmnxOamLspPingCtlPathDestType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlPathDestType specifies the type of
         Internet address stored in tmnxOamLspPingCtlPathDest.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspPingCtlEntry 11 }

tmnxOamLspPingCtlPathDest        OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlPathDest specifies a unique path for
         this LSP ping to traverse. This address is used as part of a hash key
         to select the appropriate ECMP path to the destination of an LSP ping
         test.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 12 }

tmnxOamLspPingCtlNhIntfName      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlNhIntfName specifies the name of the
         next hop interface to be used when transmitting an LSP ping.

         When the test is started, if this name is not empty, there must be a
         TIMETRA-VRTR-MIB::vRtrIfTable row with:
         1.  tmnxOamLspPingCtlNhIntfName equal to TIMETRA-VRTR-MIB::vRtrIfName,
             AND
         2.  TIMETRA-VRTR-MIB::vRtrID equal to 1.
         Otherwise, the test will fail.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 13 }

tmnxOamLspPingCtlNhAddressType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlNhAddressType specifies the type of
         Internet address stored in tmnxOamLspPingCtlNhAddress.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspPingCtlEntry 14 }

tmnxOamLspPingCtlNhAddress       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlNhAddress specifies the interface
         address to the next hop which will be used to transmit the LSP ping.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 15 }

tmnxOamLspPingCtlTestSubMode     OBJECT-TYPE
    SYNTAX      TmnxOamLspTestSubMode
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlTestSubMode specifies the type of LSP
         ping test to perform.

         When this object is 'unspecified(1)', the type of LSP ping test to be
         performed is determined when the test is started, from the set of
         tmnxOamLspPingCtlTable objects configured with non-default values.

         If there is a mismatch between tmnxOamLspPingCtlTestSubMode and the
         type of the LSP to be tested, the test will fail.  For example, if
         tmnxOamLspPingCtlTestSubMode is 'static(2)', and
         tmnxOamLspPingCtlLspName refers to an LSP with
         TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to 'mplsTp(7)', the test
         will fail.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { unspecified }
    ::= { tmnxOamLspPingCtlEntry 16 }

tmnxOamLspPingCtlMplsTpPathType  OBJECT-TYPE
    SYNTAX      TmnxOamMplsTpPathType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlMplsTpPathType specifies the type of the
         MPLS-TP path to be tested.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { active }
    ::= { tmnxOamLspPingCtlEntry 17 }

tmnxOamLspPingCtlMplsTpGlobalId  OBJECT-TYPE
    SYNTAX      TmnxMplsTpGlobalID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlMplsTpGlobalId specifies the target
         MPLS-TP Global Identifier to be used for the test.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamLspPingCtlEntry 18 }

tmnxOamLspPingCtlMplsTpNodeId    OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlMplsTpNodeId specifies the target
         MPLS-TP Node Identifier to be used for the test.

         A value of zero indicates that no Node Identifier has been configured.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamLspPingCtlEntry 19 }

tmnxOamLspPingCtlAssocChannel    OBJECT-TYPE
    SYNTAX      TmnxOamLspAssocChannel
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlAssocChannel specifies the launched echo
         request's usage of the Associated Channel (ACH) mechanism, when
         testing an MPLS-TP LSP.

         When tmnxOamLspPingCtlTestSubMode is 'static(2)', the default value
         for tmnxOamLspPingCtlAssocChannel is 'nonIp(2)'.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { notApplicable }
    ::= { tmnxOamLspPingCtlEntry 20 }

tmnxOamLspPingCtlForce           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlForce specifies whether or not to force
         the transmission of the 'lspPing' request PDU(s).

         If tmnxOamLspPingCtlForce is 'true(1)', the test will proceed and
         request PDU(s) will be sent regardless of the local operational status
         of the tested LSP path.

         If tmnxOamLspPingCtlForce is 'false(2)',  the test will fail
         immediately when the local operational status of the tested LSP path is
         down.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { false }
    ::= { tmnxOamLspPingCtlEntry 21 }

tmnxOamLspPingCtlIgpInstance     OBJECT-TYPE
    SYNTAX      TmnxIgpInstance
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlIgpInstance specifies the Interior
         Gateway Protocol (IGP) instance to be used for the test.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamLspPingCtlEntry 22 }

tmnxOamLspPingCtlSrPlcyColor     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlSrPlcyColor specifies the Segment Routing
         (SR) policy color to be used for the test.  A color associates an
         SR policy with an intent (e.g. low latency).

         tmnxOamLspPingCtlSrPlcyColor, tmnxOamLspPingCtlSrPlcyEndPtAddT, and
         tmnxOamLspPingCtlSrPlcyEndPtAddr must identify a known SR policy.
         Otherwise, the test will fail.  The color of a static SR policy is
         defined using TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyColor.

         When configuring an SR policy LSP ping test, the following objects
         must all be set in one snmpset PDU:
            tmnxOamLspPingCtlTestSubMode = 'srPolicy(7)',
            tmnxOamLspPingCtlSrPlcyColor,
            tmnxOamLspPingCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)',
            tmnxOamLspPingCtlSrPlcyEndPtAddr.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    REFERENCE
        "IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.1, 'Identification of an SR Policy'."
    DEFVAL      { 0 }
    ::= { tmnxOamLspPingCtlEntry 23 }

tmnxOamLspPingCtlSrPlcyEndPtAddT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlSrPlcyEndPtAddT specifies the type of IP
         address stored in tmnxOamLspPingCtlSrPlcyEndPtAddr.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspPingCtlEntry 24 }

tmnxOamLspPingCtlSrPlcyEndPtAddr OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlSrPlcyEndPtAddr specifies the Segment
         Routing (SR) policy endpoint address to be used for the test.

         tmnxOamLspPingCtlSrPlcyColor, tmnxOamLspPingCtlSrPlcyEndPtAddT, and
         tmnxOamLspPingCtlSrPlcyEndPtAddr must identify a known SR policy.
         Otherwise, the test will fail.  The endpoint of a static SR policy
         is defined using
             TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddrType
             TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddr.

         When configuring an SR policy LSP ping test, the following objects
         must all be set in one snmpset PDU:
            tmnxOamLspPingCtlTestSubMode = 'srPolicy(7)',
            tmnxOamLspPingCtlSrPlcyColor,
            tmnxOamLspPingCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)',
            tmnxOamLspPingCtlSrPlcyEndPtAddr.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    REFERENCE
        "IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.1, 'Identification of an SR Policy'."
    DEFVAL      { ''H }
    ::= { tmnxOamLspPingCtlEntry 25 }

tmnxOamLspPingCtlSrPlcySegList   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..32)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspPingCtlSrPlcySegList specifies the Segment
         Routing (SR) policy segment list to be used for the test.

         The supported object combinations for LSP ping tests are listed in the
         tmnxOamLspPingCtlTable DESCRIPTION clause."
    REFERENCE
        "IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.2, 'Candidate Path and Segment List'."
    DEFVAL      { 0 }
    ::= { tmnxOamLspPingCtlEntry 26 }

tmnxOamVprnPingCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVprnPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVprnPingCtlTable contains configuration information for
         'vprnPing' tests."
    ::= { tmnxOamPingObjs 10 }

tmnxOamVprnPingCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamVprnPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVprnPingCtlEntry contains configuration information for one
         'vprnPing' test.

         SROS creates a row when tmnxOamPingCtlTestMode is set to 'vprnPing'.

         SROS destroys a row when the corresponding tmnxOamPingCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamVprnPingCtlTable 1 }

TmnxOamVprnPingCtlEntry          ::= SEQUENCE
{
    tmnxOamVprnPingCtlSourceIpAddr   IpAddress,
    tmnxOamVprnPingCtlReplyControl   TruthValue,
    tmnxOamVprnPingCtlTtl            Unsigned32,
    tmnxOamVprnPingCtlSrcAddrType    InetAddressType,
    tmnxOamVprnPingCtlSrcAddress     InetAddress
}

tmnxOamVprnPingCtlSourceIpAddr   OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamVprnPingCtlSrcAddrType and
         tmnxOamVprnPingCtlSrcAddress."
    DEFVAL      { '00000000'h }
    ::= { tmnxOamVprnPingCtlEntry 1 }

tmnxOamVprnPingCtlReplyControl   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamVprnPingCtlReplyControl is 'true', the
         OAM ping response is returned using the control plane.  If its value
         is 'false', the packet is sent via the data plane.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'vprnPing'."
    DEFVAL      { false }
    ::= { tmnxOamVprnPingCtlEntry 2 }

tmnxOamVprnPingCtlTtl            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the vc-label time-to-live value.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'vprnPing'.

         While performing the test with a TTL of 1 no responses should ever be
         expected."
    DEFVAL      { 255 }
    ::= { tmnxOamVprnPingCtlEntry 3 }

tmnxOamVprnPingCtlSrcAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnPingCtlSrcAddrType specifies the Internet
         address type stored in tmnxOamVprnPingCtlSrcAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamVprnPingCtlEntry 4 }

tmnxOamVprnPingCtlSrcAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnPingCtlSrcAddress specifies the Internet
         address to be used as the source for performing an OAM ping operation
         when tmnxOamPingCtlTestMode has a value of 'vprnPing'.

         This parameter is required."
    DEFVAL      { ''H }
    ::= { tmnxOamVprnPingCtlEntry 5 }

tmnxOamAtmPingCtlTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamAtmPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamAtmPingCtlTable contains configuration information for
         'atmPing' tests."
    ::= { tmnxOamPingObjs 11 }

tmnxOamAtmPingCtlEntry           OBJECT-TYPE
    SYNTAX      TmnxOamAtmPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamAtmPingCtlEntry contains configuration information for one
         'atmPing' test.

         SROS creates a row when tmnxOamPingCtlTestMode is set to 'atmPing'.

         SROS destroys a row when the corresponding tmnxOamPingCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamAtmPingCtlTable 1 }

TmnxOamAtmPingCtlEntry           ::= SEQUENCE
{
    tmnxOamAtmPingCtlPortId          TmnxPortID,
    tmnxOamAtmPingCtlVpi             AtmVpIdentifier,
    tmnxOamAtmPingCtlVci             AtmVcIdentifier,
    tmnxOamAtmPingCtlLpbkLocation    OCTET STRING,
    tmnxOamAtmPingCtlSegment         INTEGER
}

tmnxOamAtmPingCtlPortId          OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamAtmPingCtlPortId is the ID of the access port of
         the target VC. This parameter is required."
    DEFVAL      { 0 }
    ::= { tmnxOamAtmPingCtlEntry 1 }

tmnxOamAtmPingCtlVpi             OBJECT-TYPE
    SYNTAX      AtmVpIdentifier
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamAtmPingCtlVpi is the VPI of the VC used to
         send the OAM ATM ping.  This is a required parameter."
    DEFVAL      { 0 }
    ::= { tmnxOamAtmPingCtlEntry 2 }

tmnxOamAtmPingCtlVci             OBJECT-TYPE
    SYNTAX      AtmVcIdentifier
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamAtmPingCtlVci is the VCI of the VC used to
         send the OAM ATM ping.  This is a required parameter."
    DEFVAL      { 0 }
    ::= { tmnxOamAtmPingCtlEntry 3 }

tmnxOamAtmPingCtlLpbkLocation    OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamAtmPingCtlLpbkLocation specifies the Loopback
         Location ID used in the ATM OAM loopback cell.  If all bits in the
         Loopback Location ID are '1', the destination of the OAM ATM ping
         is the far-end destination of the VC.  Otherwise the cell is destined
         to a specific ATM node in the ATM network.

         This is an optional parameter."
    DEFVAL      { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'H }
    ::= { tmnxOamAtmPingCtlEntry 4 }

tmnxOamAtmPingCtlSegment         OBJECT-TYPE
    SYNTAX      INTEGER {
        endToEnd (1),
        segment  (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamAtmPingCtlSegment determines if the ATM OAM
         loopback cell is destined to the first segment going in the line
         direction or the PVCC's connection endpoint."
    DEFVAL      { endToEnd }
    ::= { tmnxOamAtmPingCtlEntry 5 }

tmnxOamMfibPingCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMfibPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMfibPingCtlTable contains configuration information for
         'mfibPing' tests."
    ::= { tmnxOamPingObjs 12 }

tmnxOamMfibPingCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamMfibPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMfibPingCtlEntry contains configuration information for one
         'mfibPing' test.

         SROS creates a row when tmnxOamPingCtlTestMode is set to 'mfibPing'.

         SROS destroys a row when the corresponding tmnxOamPingCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamMfibPingCtlTable 1 }

TmnxOamMfibPingCtlEntry          ::= SEQUENCE
{
    tmnxOamMfibPingCtlSourceIpAddr   IpAddress,
    tmnxOamMfibPingCtlDestIpAddr     IpAddress,
    tmnxOamMfibPingCtlReplyControl   TruthValue,
    tmnxOamMfibPingCtlTtl            Unsigned32,
    tmnxOamMfibPingCtlSrcAddrType    InetAddressType,
    tmnxOamMfibPingCtlSrcAddress     InetAddress,
    tmnxOamMfibPingCtlDestAddrType   InetAddressType,
    tmnxOamMfibPingCtlDestAddress    InetAddress,
    tmnxOamMfibPingCtlDestMacAddr    MacAddress
}

tmnxOamMfibPingCtlSourceIpAddr   OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMfibPingCtlSrcAddrType and
         tmnxOamMfibPingCtlSrcAddress."
    DEFVAL      { '00000000'h }
    ::= { tmnxOamMfibPingCtlEntry 1 }

tmnxOamMfibPingCtlDestIpAddr     OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMfibPingCtlDestAddrType and
         tmnxOamMfibPingCtlDestAddress."
    DEFVAL      { '00000000'h }
    ::= { tmnxOamMfibPingCtlEntry 2 }

tmnxOamMfibPingCtlReplyControl   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamMfibPingCtlReplyControl is 'true', the OAM
         ping response is returned using the control plane. If its value is
         'false', the packet is sent via the data plane.

         This object is optional and is not relevant when
         tmnxOamPingCtlTestMode has a value other than 'mfibPing'."
    DEFVAL      { false }
    ::= { tmnxOamMfibPingCtlEntry 3 }

tmnxOamMfibPingCtlTtl            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the vc-label time-to-live value. This object is optional and
         is not relevant when tmnxOamPingCtlTestMode has a value other than
         'mfibPing'. While performing the test with a TTL of 1 no responses
         should ever be expected."
    DEFVAL      { 255 }
    ::= { tmnxOamMfibPingCtlEntry 4 }

tmnxOamMfibPingCtlSrcAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMfibPingCtlSrcAddrType specifies the Internet
         address type stored in tmnxOamMfibPingCtlSrcAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamMfibPingCtlEntry 5 }

tmnxOamMfibPingCtlSrcAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMfibPingCtlSrcAddress specifies the Internet
         address to be used as the source for performing an OAM ping
         operation when tmnxOamPingCtlTestMode has a value of 'mfibPing'
         and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros, in
         which case this parameter is required.  If tmnxOamPingCtlTestMode is
         different from 'mfibPing' this field is ignored."
    DEFVAL      { ''H }
    ::= { tmnxOamMfibPingCtlEntry 6 }

tmnxOamMfibPingCtlDestAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMfibPingCtlDestAddrType specifies the Internet
         multicast address type stored in tmnxOamMfibPingCtlDestAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamMfibPingCtlEntry 7 }

tmnxOamMfibPingCtlDestAddress    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMfibPingCtlDestAddress specifies the Internet
         multicast address to be used as the destination for performing an
         OAM ping operation when tmnxOamPingCtlTestMode has a value of
         'mfibPing' and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros,
         in which case this parameter is required.  If tmnxOamPingCtlTestMode is
         different from 'mfibPing' this field is ignored."
    DEFVAL      { ''H }
    ::= { tmnxOamMfibPingCtlEntry 8 }

tmnxOamMfibPingCtlDestMacAddr    OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMfibPingCtlDestMacAddr specifies the IPv6
         multicast MAC address to be used as the destination for performing an
         OAM ping operation when tmnxOamPingCtlTestMode has a value of
         'mfibPing' and objects tmnxOamMfibPingCtlSrcAddrType and
         tmnxOamMfibPingCtlDestAddrType have a value of 'unknown (0)',
         in which case this parameter is required.  If tmnxOamPingCtlTestMode is
         different from 'mfibPing' this field is ignored."
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamMfibPingCtlEntry 9 }

tmnxOamCpePingCtlTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamCpePingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamCpePingCtlTable contains configuration information for
         'cpePing' tests."
    ::= { tmnxOamPingObjs 13 }

tmnxOamCpePingCtlEntry           OBJECT-TYPE
    SYNTAX      TmnxOamCpePingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamCpePingCtlEntry contains configuration information for one
         'cpePing' test.

         SROS creates a row when tmnxOamPingCtlTestMode is set to 'cpePing'.

         SROS destroys a row when the corresponding tmnxOamPingCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamCpePingCtlTable 1 }

TmnxOamCpePingCtlEntry           ::= SEQUENCE
{
    tmnxOamCpePingCtlSourceIpAddr    IpAddress,
    tmnxOamCpePingCtlSendControl     TruthValue,
    tmnxOamCpePingCtlReplyControl    TruthValue,
    tmnxOamCpePingCtlTtl             Unsigned32,
    tmnxOamCpePingCtlSrceMacAddr     MacAddress,
    tmnxOamCpePingCtlSrcAddrType     InetAddressType,
    tmnxOamCpePingCtlSrcAddress      InetAddress
}

tmnxOamCpePingCtlSourceIpAddr    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamCpePingCtlSrcAddrType and
         tmnxOamCpePingCtlSrcAddress."
    DEFVAL      { '00000000'h }
    ::= { tmnxOamCpePingCtlEntry 1 }

tmnxOamCpePingCtlSendControl     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamCpePingCtlSendControl specifies whether the
         outbound OAM ping packet will use the data plane or the control plane.

         When the value is 'false', the packet is sent using the data plane.

         As of SROS release 13.0 R1, a test cannot be started if
         tmnxOamCpePingCtlSendControl is 'true'.  A test is started using
         tmnxOamPingCtlAdminStatus.

         This object will be marked obsolete in a future release."
    DEFVAL      { false }
    ::= { tmnxOamCpePingCtlEntry 2 }

tmnxOamCpePingCtlReplyControl    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamCpePingCtlReplyControl is 'true', the OAM
         ping response is returned using the control plane. If its value is
         'false', the packet is sent via the data plane. This object is
         optional and is not relevant when tmnxOamPingCtlTestMode has a value
         other than 'cpePing'."
    DEFVAL      { false }
    ::= { tmnxOamCpePingCtlEntry 3 }

tmnxOamCpePingCtlTtl             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the vc-label time-to-live value. This object is optional and
         is not relevant when tmnxOamPingCtlTestMode has a value other than
         'cpePing'. When performing the test with a TTL=1, the cpe-ping is only
         done to the local SAP(s)."
    DEFVAL      { 255 }
    ::= { tmnxOamCpePingCtlEntry 4 }

tmnxOamCpePingCtlSrceMacAddr     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When set to a non zero value, the system will use the value as the
         source MAC address in the ARP request that will be sent to the CPE. If
         set to 0, the MAC address configured for the CPM is used. This object
         is optional and is not relevant when tmnxOamPingCtlTestMode has a
         value other than 'cpePing'."
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamCpePingCtlEntry 5 }

tmnxOamCpePingCtlSrcAddrType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamCpePingCtlSrcAddrType specifies the Internet
         address type stored in tmnxOamCpePingCtlSrcAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamCpePingCtlEntry 6 }

tmnxOamCpePingCtlSrcAddress      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamCpePingCtlSrcAddress specifies the Internet
         address to be used as the source for performing a CPE ping operation
         when tmnxOamPingCtlTestMode has a value of 'cpePing'.  This parameter
         is required for 'cpePing' and ignored in all other cases."
    DEFVAL      { ''H }
    ::= { tmnxOamCpePingCtlEntry 7 }

tmnxOamMRInfoRespTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMRInfoRespEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespTable contains node-level information provided by
         destination nodes of successful 'mrInfo' tests."
    ::= { tmnxOamPingObjs 14 }

tmnxOamMRInfoRespEntry           OBJECT-TYPE
    SYNTAX      TmnxOamMRInfoRespEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespEntry contains node-level information provided by the
         destination node of a successful 'mrInfo' test.

         A row is created when node-level information is provided by a
         destination node.

         A row is destroyed when the corresponding tmnxOamPingHistoryTable row
         is destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamPingHistoryIndex
    }
    ::= { tmnxOamMRInfoRespTable 1 }

TmnxOamMRInfoRespEntry           ::= SEQUENCE
{
    tmnxOamMRInfoRespCapabilities    BITS,
    tmnxOamMRInfoRespMinorVersion    Unsigned32,
    tmnxOamMRInfoRespMajorVersion    Unsigned32,
    tmnxOamMRInfoRespNumInterfaces   Unsigned32
}

tmnxOamMRInfoRespCapabilities    OBJECT-TYPE
    SYNTAX      BITS {
        leaf   (0),
        prune  (1),
        genid  (2),
        mtrace (3),
        snmp   (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespCapabilities indicates the capabilities of the router
         responding to the mrinfo request:
            leaf(0)     This is a leaf router
            prune(1)    This router understands pruning
            genid(2)    This router sends Generation Id's
            mtrace(3)   This router handles Mtrace requests
            snmp(4)     This router supports the DVMRP MIB"
    ::= { tmnxOamMRInfoRespEntry 1 }

tmnxOamMRInfoRespMinorVersion    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespMinorVersion indicates the minor software version on
         the router responding to the mrinfo request."
    ::= { tmnxOamMRInfoRespEntry 2 }

tmnxOamMRInfoRespMajorVersion    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespMajorVersion indicates the major software version on
         the router responding to the mrinfo request."
    ::= { tmnxOamMRInfoRespEntry 3 }

tmnxOamMRInfoRespNumInterfaces   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespNumInterfaces indicates the number of interfaces in
         the mrinfo response packet. These interfaces are listed in the
         tmnxOamMRInfoRespIfTable."
    ::= { tmnxOamMRInfoRespEntry 4 }

tmnxOamMRInfoRespIfTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMRInfoRespIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfTable contains interface-level information provided
         by destination nodes of successful 'mrInfo' tests."
    ::= { tmnxOamPingObjs 15 }

tmnxOamMRInfoRespIfEntry         OBJECT-TYPE
    SYNTAX      TmnxOamMRInfoRespIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfEntry contains interface-level information provided
         by the destination node of a successful 'mrInfo' test.

         Rows are created when interface-level information is provided by a
         destination node.

         Rows are destroyed when the corresponding tmnxOamMRInfoRespTable row
         is destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamPingHistoryIndex,
        tmnxOamMRInfoRespIfIndex
    }
    ::= { tmnxOamMRInfoRespIfTable 1 }

TmnxOamMRInfoRespIfEntry         ::= SEQUENCE
{
    tmnxOamMRInfoRespIfIndex         Unsigned32,
    tmnxOamMRInfoRespIfAddress       IpAddress,
    tmnxOamMRInfoRespIfMetric        Unsigned32,
    tmnxOamMRInfoRespIfThreshold     Unsigned32,
    tmnxOamMRInfoRespIfFlags         BITS,
    tmnxOamMRInfoRespIfNbrCount      Unsigned32,
    tmnxOamMRInfoRespIfAddrType      InetAddressType,
    tmnxOamMRInfoRespIfAddr          InetAddress
}

tmnxOamMRInfoRespIfIndex         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfIndex is the index into the
         tmnxOamMRInfoRespIfTable.  The mrinfo response packet has
         the router's interfaces on which multicast is enabled.
         tmnxOamMRInfoRespIfIndex is used to identify those interfaces."
    ::= { tmnxOamMRInfoRespIfEntry 1 }

tmnxOamMRInfoRespIfAddress       OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMRInfoRespIfAddrType and
         tmnxOamMRInfoRespIfAddr."
    ::= { tmnxOamMRInfoRespIfEntry 2 }

tmnxOamMRInfoRespIfMetric        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfMetric indicates the metric on the interface."
    ::= { tmnxOamMRInfoRespIfEntry 3 }

tmnxOamMRInfoRespIfThreshold     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfThreshold indicates the threshold on the interface."
    ::= { tmnxOamMRInfoRespIfEntry 4 }

tmnxOamMRInfoRespIfFlags         OBJECT-TYPE
    SYNTAX      BITS {
        tunnel    (0),
        srcrt     (1),
        reserved1 (2),
        reserved2 (3),
        down      (4),
        disabled  (5),
        querier   (6),
        leaf      (7)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfFlags indicates the flags associated with an
         interface:

         tunnel(0)         Neighbor reached via tunnel
         srcrt(1)          Tunnel uses IP source routing
         reserved1(2)      No longer used
         reserved2(3)      No longer used
         down(4)           Operational status down
         disabled(5)       Administrative status down
         querier(6)        Querier for interface
         leaf(7)           No downstream neighbors on interface"
    ::= { tmnxOamMRInfoRespIfEntry 5 }

tmnxOamMRInfoRespIfNbrCount      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfNbrCount indicates the number of multicast
         neighbors on the interface. The neighbors are listed in the
         tmnxOamMRInfoRespIfNbrTable."
    ::= { tmnxOamMRInfoRespIfEntry 6 }

tmnxOamMRInfoRespIfAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfAddrType indicates the Internet address type stored
         in tmnxOamMRInfoRespIfAddr."
    ::= { tmnxOamMRInfoRespIfEntry 7 }

tmnxOamMRInfoRespIfAddr          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfAddr indicates the Internet address of the
         interface on the router responding to the mrinfo request."
    ::= { tmnxOamMRInfoRespIfEntry 8 }

tmnxOamMRInfoRespIfNbrTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMRInfoRespIfNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfNbrTable contains neighbor-level information
         provided by destination nodes of successful 'mrInfo' tests."
    ::= { tmnxOamPingObjs 16 }

tmnxOamMRInfoRespIfNbrEntry      OBJECT-TYPE
    SYNTAX      TmnxOamMRInfoRespIfNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfNbrEntry contains neighbor-level information
         provided by the destination node of a successful 'mrInfo' test.

         Rows are created when neighbor-level information is provided by a
         destination node.

         Rows are destroyed when the corresponding tmnxOamMRInfoRespIfTable row
         is destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamPingHistoryIndex,
        tmnxOamMRInfoRespIfIndex,
        tmnxOamMRInfoRespIfNbrIndex
    }
    ::= { tmnxOamMRInfoRespIfNbrTable 1 }

TmnxOamMRInfoRespIfNbrEntry      ::= SEQUENCE
{
    tmnxOamMRInfoRespIfNbrIndex      Unsigned32,
    tmnxOamMRInfoRespIfNbrAddress    IpAddress,
    tmnxOamMRInfoRespIfNbrAddrType   InetAddressType,
    tmnxOamMRInfoRespIfNbrAddr       InetAddress
}

tmnxOamMRInfoRespIfNbrIndex      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfNbrIndex is used to identify the multicast neighbor
         on the interface tmnxOamMRInfoRespIfIndex."
    ::= { tmnxOamMRInfoRespIfNbrEntry 1 }

tmnxOamMRInfoRespIfNbrAddress    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMRInfoRespIfNbrAddrType and
         tmnxOamMRInfoRespIfNbrAddr."
    ::= { tmnxOamMRInfoRespIfNbrEntry 2 }

tmnxOamMRInfoRespIfNbrAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfNbrAddrType indicates the Internet address type
         stored in tmnxOamMRInfoRespIfNbrAddr."
    ::= { tmnxOamMRInfoRespIfNbrEntry 3 }

tmnxOamMRInfoRespIfNbrAddr       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamMRInfoRespIfNbrAddr indicates the Internet address of the
         neighbor on the interface."
    ::= { tmnxOamMRInfoRespIfNbrEntry 4 }

tmnxOamVccvPingCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVccvPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row in tmnxOamVccvPingCtlTable contains the VCCV-specific
         configuration information needed to launch a VCCV (Virtual Circuit
         Connectivity Verification) ping test.  The rest of the configuration
         information needed to launch the test resides in the corresponding row
         of tmnxOamPingCtlTable.

         Four types of VCCV ping tests are supported:  AII Type 2, FEC-128
         Pseudowire, Spoke SDP FEC, and Transport Profile Static.  AII Type 2
         and Spoke SDP FEC offer two ways to specify a VCCV ping FEC-129
         Pseudowire test.

         In the Transport Profile Static case, the test type is configured
         (using tmnxOamVccvPingCtlTestSubMode).  In the other three cases, the
         test type is not configured (i.e. the default
         tmnxOamVccvPingCtlTestSubMode value 'unspecified(1)' is used).

         The following table has a row for each VCCV ping test type, showing
         the mandatory and optional objects applicable to the test type.
         Abbreviated VCCV ping test type names are used.

         Test
         Type   Mandatory Objects               Optional Objects
         ------ ------------------------------ ---------------------------------
         aiiTY2 tmnxOamVccvPingCtlSaiiAcId     *tmnxOamPingCtlSrcAddrType
                tmnxOamVccvPingCtlSaiiGlobalId *tmnxOamPingCtlSrcAddress
                tmnxOamVccvPingCtlSaiiPrefix   *tmnxOamPingCtlTgtAddrType
                tmnxOamVccvPingCtlTaiiAcId     *tmnxOamPingCtlTgtAddress
                tmnxOamVccvPingCtlTaiiGlobalId  tmnxOamVccvPingCtlReplyMode
                tmnxOamVccvPingCtlTaiiPrefix

         FEC128 tmnxOamVccvPingCtlSdpIdVcId    *tmnxOamPingCtlSrcAddrType
                                               *tmnxOamPingCtlSrcAddress
                                               *tmnxOamPingCtlTgtAddrType
                                               *tmnxOamPingCtlTgtAddress
                                               *tmnxOamVccvPingCtlPwId
                                                tmnxOamVccvPingCtlReplyMode
                                               #tmnxOamVccvPingCtlSwitTgtFecType
                                               #tmnxOamVccvPgTgStaticCtlAgi
                                               #tmnxOamVccvPgTgStaticCtlSaiiGlbl
                                               #tmnxOamVccvPgTgStaticCtlSaiiNode
                                               #tmnxOamVccvPgTgStaticCtlSaiiAcId
                                               #tmnxOamVccvPgTgStaticCtlTaiiGlbl
                                               #tmnxOamVccvPgTgStaticCtlTaiiNode
                                               #tmnxOamVccvPgTgStaticCtlTaiiAcId

         sdpFEC tmnxOamVccvPingCtlSpokeSdpId   *tmnxOamPingCtlSrcAddrType
                                               *tmnxOamPingCtlSrcAddress
                                               *tmnxOamPingCtlTgtAddrType
                                               *tmnxOamPingCtlTgtAddress
                                               #tmnxOamVccvPingCtlSaiiAcId
                                               #tmnxOamVccvPingCtlSaiiGlobalId
                                               #tmnxOamVccvPingCtlSaiiPrefix
                                               #tmnxOamVccvPingCtlTaiiAcId
                                               #tmnxOamVccvPingCtlTaiiGlobalId
                                               #tmnxOamVccvPingCtlTaiiPrefix
                                                tmnxOamVccvPingCtlReplyMode

         TPST   tmnxOamVccvPingCtlSdpIdVcId    *tmnxOamPingCtlSrcAddrType
                tmnxOamVccvPingCtlTestSubMode  *tmnxOamPingCtlSrcAddress
                                                tmnxOamVccvPingCtlAssocChannel
                                               #tmnxOamVccvPingCtlMplsTpGlobalId
                                               #tmnxOamVccvPingCtlMplsTpNodeId
                                               ^tmnxOamVccvPingCtlSwitTgtFecType
                                               ^tmnxOamVccvPgTgFec128CtlSrcAddrT
                                               ^tmnxOamVccvPgTgFec128CtlSrcAddr
                                               ^tmnxOamVccvPgTgFec128CtlDstAddrT
                                               ^tmnxOamVccvPgTgFec128CtlDstAddr
                                               ^tmnxOamVccvPgTgFec128CtlPwId
                                               ^tmnxOamVccvPgTgFec128CtlPwType

         ALL    N/A                             tmnxOamPingCtlFcName
                                                tmnxOamPingCtlInterval
                                                tmnxOamPingCtlProbeCount
                                                tmnxOamPingCtlProfile
                                                tmnxOamPingCtlSize
                                                tmnxOamPingCtlTimeOut
                                                tmnxOamVccvPingCtlTtl
         ------ ------------------------------ ---------------------------------

         In the table above,
         1.  The optional objects in the ALL row apply to all four VCCV ping
             test types.
         2.  The characters '*', '#', and '^' each mark an independent set of
             optional objects which must all be specified, or must all be
             unspecified.

         When an object combination other than a combination listed above is
         specified, values will be rejected or ignored, or the test will fail."
    REFERENCE
        "RFC 5085, 'Pseudowire Virtual Circuit Connectivity Verification (VCCV):
         A Control Channel for Pseudowires'"
    ::= { tmnxOamPingObjs 17 }

tmnxOamVccvPingCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamVccvPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The system creates a row in tmnxOamVccvPingCtlTable when a row is
         created in tmnxOamPingCtlTable with tmnxOamPingCtlTestMode set to
         'vccvPing'.

         The system deletes a row in tmnxOamVccvPingCtlTable when the
         corresponding row in tmnxOamPingCtlTable is deleted."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamVccvPingCtlTable 1 }

TmnxOamVccvPingCtlEntry          ::= SEQUENCE
{
    tmnxOamVccvPingCtlSdpIdVcId      SdpBindId,
    tmnxOamVccvPingCtlReplyMode      INTEGER,
    tmnxOamVccvPingCtlPwId           TmnxVcIdOrNone,
    tmnxOamVccvPingCtlTtl            Unsigned32,
    tmnxOamVccvPingCtlSpokeSdpId     TmnxSpokeSdpIdOrZero,
    tmnxOamVccvPingCtlSaiiGlobalId   TmnxPwGlobalIdOrZero,
    tmnxOamVccvPingCtlSaiiPrefix     Unsigned32,
    tmnxOamVccvPingCtlSaiiAcId       Unsigned32,
    tmnxOamVccvPingCtlTaiiGlobalId   TmnxPwGlobalIdOrZero,
    tmnxOamVccvPingCtlTaiiPrefix     Unsigned32,
    tmnxOamVccvPingCtlTaiiAcId       Unsigned32,
    tmnxOamVccvPingCtlMplsTpGlobalId TmnxMplsTpGlobalID,
    tmnxOamVccvPingCtlMplsTpNodeId   TmnxMplsTpNodeID,
    tmnxOamVccvPingCtlTestSubMode    TmnxOamVccvTestSubMode,
    tmnxOamVccvPingCtlAssocChannel   TmnxOamVccvAssocChannel,
    tmnxOamVccvPingCtlSwitTgtFecType TmnxOamVccvSwitTgtFecType
}

tmnxOamVccvPingCtlSdpIdVcId      OBJECT-TYPE
    SYNTAX      SdpBindId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlSdpIdVcId specifies the SDP binding of
         the pseudowire to be tested by a VCCV ping test.

         The all-zeros value indicates an unused SDP binding.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { '0000000000000000'h }
    ::= { tmnxOamVccvPingCtlEntry 1 }

tmnxOamVccvPingCtlReplyMode      OBJECT-TYPE
    SYNTAX      INTEGER {
        ip             (2),
        controlChannel (4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlReplyMode specifies the band to be used
         by the echo reply PDU.
             ip(2)                 out-of-band reply
             controlChannel(4)     inband reply

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3, 'Packet Format'."
    DEFVAL      { controlChannel }
    ::= { tmnxOamVccvPingCtlEntry 2 }

tmnxOamVccvPingCtlPwId           OBJECT-TYPE
    SYNTAX      TmnxVcIdOrNone
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlPwId specifies the pseudowire
         identifier to be used when performing a VCCV ping test on a FEC 128
         pseudowire. The pseudowire Id is a non-zero 32-bit connection ID
         required by FEC 128, as defined in RFC 4379.

         A value of zero indicates that no pseudowire Id has been configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 3 }

tmnxOamVccvPingCtlTtl            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlTtl specifies the time-to-live value for
         the vc-label of the echo request message.  The outer label TTL is set
         to 255, regardless of this value.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { 1 }
    ::= { tmnxOamVccvPingCtlEntry 4 }

tmnxOamVccvPingCtlSpokeSdpId     OBJECT-TYPE
    SYNTAX      TmnxSpokeSdpIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlSpokeSdpId specifies the spoke SDP
         identifier to be used when performing a VCCV ping test on a FEC 129
         pseudowire.

         A value of zero indicates that no spoke SDP identifier has been
         configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 5 }

tmnxOamVccvPingCtlSaiiGlobalId   OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlSaiiGlobalId specifies the global
         identifier of the Source Attachment Individual Identifier (SAII) to be
         used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no global identifier has been
         configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 6 }

tmnxOamVccvPingCtlSaiiPrefix     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlSaiiPrefix specifies the prefix of the
         Source Attachment Individual Identifier (SAII) to be used when testing
         a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no prefix has been configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 7 }

tmnxOamVccvPingCtlSaiiAcId       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlSaiiAcId specifies the attachment
         circuit identifier of the Source Attachment Individual Identifier
         (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no attachment circuit identifier has
         been configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 8 }

tmnxOamVccvPingCtlTaiiGlobalId   OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlTaiiGlobalId specifies the global
         identifier of the Target Attachment Individual Identifier (TAII) to be
         used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no global identifier has been
         configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 9 }

tmnxOamVccvPingCtlTaiiPrefix     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlTaiiPrefix specifies the prefix of the
         Target Attachment Individual Identifier (TAII) to be used when testing
         a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no prefix has been configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 10 }

tmnxOamVccvPingCtlTaiiAcId       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlTaiiAcId specifies the attachment
         circuit identifier of the Target Attachment Individual Identifier
         (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no attachment circuit identifier has
         been configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 11 }

tmnxOamVccvPingCtlMplsTpGlobalId OBJECT-TYPE
    SYNTAX      TmnxMplsTpGlobalID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlMplsTpGlobalId specifies the target
         MPLS-TP Global Identifier to be used for the test.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 12 }

tmnxOamVccvPingCtlMplsTpNodeId   OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlMplsTpNodeId specifies the target
         MPLS-TP Node Identifier to be used for the test.

         A value of zero indicates that no Node Identifier has been configured.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPingCtlEntry 13 }

tmnxOamVccvPingCtlTestSubMode    OBJECT-TYPE
    SYNTAX      TmnxOamVccvTestSubMode
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlTestSubMode specifies the type of VCCV
         ping test to perform.

         When this object is 'unspecified(1)', the type of VCCV ping test to be
         performed is determined when the test is started, from the set of
         tmnxOamVccvPingCtlTable objects configured with non-default values.

         If there is a mismatch between tmnxOamVccvPingCtlTestSubMode and the
         type of the pseudowire to be tested, the test will fail.  For example,
         if tmnxOamVccvPingCtlTestSubMode is 'static(2)', and there is no
         TIMETRA-SDP-MIB::sdpBindPwPathTable row for the test's SDP binding,
         the test will fail.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { unspecified }
    ::= { tmnxOamVccvPingCtlEntry 14 }

tmnxOamVccvPingCtlAssocChannel   OBJECT-TYPE
    SYNTAX      TmnxOamVccvAssocChannel
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlAssocChannel specifies the launched
         echo request's usage of the Associated Channel (ACH) mechanism, when
         performing an MPLS-TP VCCV ping test.

         When tmnxOamVccvPingCtlTestSubMode is 'static(2)', the default value
         for tmnxOamVccvPingCtlAssocChannel is 'nonIp(2)'.

         The supported object combinations for VCCV ping tests are listed in
         the tmnxOamVccvPingCtlTable DESCRIPTION clause."
    DEFVAL      { notApplicable }
    ::= { tmnxOamVccvPingCtlEntry 15 }

tmnxOamVccvPingCtlSwitTgtFecType OBJECT-TYPE
    SYNTAX      TmnxOamVccvSwitTgtFecType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPingCtlSwitTgtFecType specifies the type of
         downstream FEC (Forward Equivalence Class) segment to be tested.

         This object must be set to a non-default value when the path to be
         tested starts with a FEC segment, and switches to a FEC segment with a
         different type.  For example, if the path to be tested starts with a
         static FEC, and switches to FEC 128, this object must be set to
         'fec128(2)'."
    DEFVAL      { none }
    ::= { tmnxOamVccvPingCtlEntry 16 }

tmnxOamIcmpPingCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamIcmpPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamIcmpPingCtlTable (along with tmnxOamPingCtlTable) contains the
         configuration information for ICMP ping tests."
    ::= { tmnxOamPingObjs 18 }

tmnxOamIcmpPingCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamIcmpPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamIcmpPingCtlEntry (along with tmnxOamPingCtlEntry) contains the
         configuration information for an ICMP ping test.

         A row is created when the corresponding tmnxOamPingCtlTestMode is set
         to 'icmpPing'.

         A row is destroyed when the corresponding tmnxOamPingCtlTable row is
         destroyed (using tmnxOamPingCtlRowStatus).

         The values in a particular row in this table cannot be changed when
         the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamIcmpPingCtlTable 1 }

TmnxOamIcmpPingCtlEntry          ::= SEQUENCE
{
    tmnxOamIcmpPingCtlRapid          TruthValue,
    tmnxOamIcmpPingCtlTtl            Unsigned32,
    tmnxOamIcmpPingCtlDSField        Unsigned32,
    tmnxOamIcmpPingCtlPattern        Integer32,
    tmnxOamIcmpPingCtlNhAddrType     InetAddressType,
    tmnxOamIcmpPingCtlNhAddress      InetAddress,
    tmnxOamIcmpPingCtlEgrIfIndex     InterfaceIndexOrZero,
    tmnxOamIcmpPingCtlBypassRouting  TruthValue,
    tmnxOamIcmpPingCtlDoNotFragment  TruthValue,
    tmnxOamIcmpPingCtlEgrIfName      TNamedItemOrEmpty
}

tmnxOamIcmpPingCtlRapid          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlRapid specifies whether or not to send
         ICMP ping probes in rapid sequence.

         Changing tmnxOamIcmpPingCtlRapid from 'false(2)' to 'true(1)'
         implicitly sets tmnxOamPingCtlIntervalUnits to 'centiseconds(2)'.  For
         example, if tmnxOamPingCtlInterval is 1, that makes the interval for
         the test 0.01 seconds.

         Changing tmnxOamIcmpPingCtlRapid from 'true(1)' to 'false(2)'
         implicitly sets tmnxOamPingCtlIntervalUnits to 'seconds(1)'.  For
         example, if tmnxOamPingCtlInterval is 1, that makes the interval for
         the test 1 second.

         tmnxOamIcmpPingCtlRapid = 'true(1)' and tmnxOamSaaCtlContinuous =
         'true(1)' is an unsupported combination."
    DEFVAL      { false }
    ::= { tmnxOamIcmpPingCtlEntry 1 }

tmnxOamIcmpPingCtlTtl            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..128)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlTtl specifies the initial time-to-live
         value for the ICMP ping packets."
    DEFVAL      { 64 }
    ::= { tmnxOamIcmpPingCtlEntry 2 }

tmnxOamIcmpPingCtlDSField        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlDSField specifies the value to load in
         the Type of Service (TOS) octet or the Traffic Class (TC) octet of the
         launched ICMP echo request(s).  The TOS octet is a field in the IPv4
         packet header.  The TC octet is a field in the IPv6 packet header.

         The value in the TOS or TC octet may influence the route, latency,
         and/or probability of loss for the echo request (and, by inference,
         for the associated data flow).

         This object is optional."
    REFERENCE
        "RFC  791, 'Internet Protocol', section 3.1.
         RFC 1812, 'Requirements for IP Version 4 Routers', section 5.3.2.
         RFC 2460, 'Internet Protocol, Version 6 (IPv6) Specification',
         section 7.
         RFC 2474, 'Definition of the Differentiated Services Field (DS Field)
         in the IPv4 and IPv6 Headers'."
    DEFVAL      { 0 }
    ::= { tmnxOamIcmpPingCtlEntry 3 }

tmnxOamIcmpPingCtlPattern        OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlPattern specifies a two-octet value to
         be repeated to fill the Data field of the ICMP ping packet.

         When the value -1 is specified, the Data field will be filled with
         positional values."
    REFERENCE
        "RFC 792, 'Internet Control Message Protocol', section 'Echo or Echo
         Reply Message'."
    DEFVAL      { -1 }
    ::= { tmnxOamIcmpPingCtlEntry 4 }

tmnxOamIcmpPingCtlNhAddrType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlNhAddrType specifies the address type
         of the tmnxOamIcmpPingCtlNhAddress Internet address."
    DEFVAL      { unknown }
    ::= { tmnxOamIcmpPingCtlEntry 5 }

tmnxOamIcmpPingCtlNhAddress      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlNhAddress specifies the Internet
         address of the next-hop.

         Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfName,
         or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value.
         Otherwise, 'inconsistentValue' is returned."
    DEFVAL      { ''H }
    ::= { tmnxOamIcmpPingCtlEntry 6 }

tmnxOamIcmpPingCtlEgrIfIndex     OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS release 21.2 R1. The
         replacement object is tmnxOamIcmpPingCtlEgrIfName."
    DEFVAL      { 0 }
    ::= { tmnxOamIcmpPingCtlEntry 7 }

tmnxOamIcmpPingCtlBypassRouting  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlBypassRouting specifies whether or not
         to send the ping request to a host on a directly attached network,
         bypassing the routing table.

         Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfName,
         or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value.
         Otherwise, 'inconsistentValue' is returned."
    DEFVAL      { false }
    ::= { tmnxOamIcmpPingCtlEntry 8 }

tmnxOamIcmpPingCtlDoNotFragment  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlDoNotFragment specifies whether or not
         the IPv4 'DF' (Don't Fragment) bit is set in the ICMP ping packet(s)
         launched for the test.

         When tmnxOamIcmpPingCtlDoNotFragment is 'true(1)', the 'DF' bit is
         set.

         This object is significant if:
         1.  The target address type for the test (i.e.
             tmnxOamPingCtlTgtAddrType) is 'ipv4(1)', or
         2.  tmnxOamPingCtlTgtAddrType is 'dns(16)', and the DNS name resolves
             to an IPv4 address.
         Otherwise, this object is ignored."
    DEFVAL      { false }
    ::= { tmnxOamIcmpPingCtlEntry 9 }

tmnxOamIcmpPingCtlEgrIfName      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpPingCtlEgrIfName specifies the name of the
         interface to use to transmit the ICMP ping packets.  The value
         provided is accepted whether or not it is a known interface name
         (validation is done as part of executing the test).

         Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfName,
         or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value.
         Otherwise, 'inconsistentValue' is returned."
    DEFVAL      { ''H }
    ::= { tmnxOamIcmpPingCtlEntry 10 }

tmnxOamAncpTestCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamAncpTestCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamAncpTestCtlTable contains configuration information for
         'ancpLoopback' tests."
    ::= { tmnxOamPingObjs 19 }

tmnxOamAncpTestCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamAncpTestCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamAncpTestCtlEntry contains configuration information for one
         'ancpLoopback' test.

         SROS creates a row when tmnxOamPingCtlTestMode is set to
         'ancpLoopback'.

         SROS destroys a row when the corresponding tmnxOamPingCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamAncpTestCtlTable 1 }

TmnxOamAncpTestCtlEntry          ::= SEQUENCE
{
    tmnxOamAncpTestTarget            INTEGER,
    tmnxOamAncpTestTargetId          DisplayString,
    tmnxOamAncpTestcount             Integer32,
    tmnxOamAncpTestTimeout           Integer32
}

tmnxOamAncpTestTarget            OBJECT-TYPE
    SYNTAX      INTEGER {
        none         (0),
        subscriberId (1),
        ancpString   (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object tmnxOamAncpTestTarget specifies how to interpret the value
         of the object tmnxOamAncpTestTargetId. If set to 'subscriberId', the
         object tmnxOamAncpTestTargetId is a printable character string which
         contains the subscriber-id. If set to 'ancpString', the object
         tmnxOamAncpTestTargetId is a printable character string which contains
         the ancp-string. If set to 'none', no value is specified, the object
         tmnxOamAncpTestTargetId is an empty string, and no ancp loopback test
         can be performed."
    DEFVAL      { none }
    ::= { tmnxOamAncpTestCtlEntry 1 }

tmnxOamAncpTestTargetId          OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..63))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object tmnxOamAncpTestTargetId contains the ID of the subscriber
         for which the ANCP loopback test must be performed. The content of the
         field is interpreted as being a subscriber-id of max 32 chars (in case
         the object tmnxOamAncpTestTarget is set to 'subscriberId'), or as
         being an acnp-string of max 63 chars (in case the object
         tmnxOamAncpTestTarget is set to 'ancpString')."
    DEFVAL      { "" }
    ::= { tmnxOamAncpTestCtlEntry 2 }

tmnxOamAncpTestcount             OBJECT-TYPE
    SYNTAX      Integer32 (0..32)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamAncpTestcount specifies the number of messages the
         access node will use to test the circuit.
         If set to 0, the number of messages will be determined by the
         access node. Following settings are allowed:
         tmnxOamAncpTestcount   tmnxOamAncpTestTimeout
                0                   0
                1..32               0
                1..32               1..255"
    DEFVAL      { 0 }
    ::= { tmnxOamAncpTestCtlEntry 3 }

tmnxOamAncpTestTimeout           OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamAncpTestTimeout specifies the number of seconds
         the controlling node will wait for a reply. This timeout value is also
         sent to the access node. If set to 0, the access node will pick a
         default value, while the control node will assume a value of 255
         seconds.

         Following settings are allowed:
         tmnxOamAncpTestcount   tmnxOamAncpTestTimeout
               0                   0
               1..32               0
               1..32               1..255"
    DEFVAL      { 0 }
    ::= { tmnxOamAncpTestCtlEntry 4 }

tmnxOamAncpTestHistoryTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamAncpTestHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM ANCP test.

         An entry in this table is created when the result of an OAM ANCP test
         is determined.

         An entry is removed from this table when its corresponding
         tmnxOamPingResultsEntry is deleted."
    ::= { tmnxOamPingObjs 20 }

tmnxOamAncpTestHistoryEntry      OBJECT-TYPE
    SYNTAX      TmnxOamAncpTestHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamAncpTestHistoryTable. The first two
         index elements identify the tmnxOamPingCtlEntry that a
         tmnxOamAncpTestHistoryTable belongs to. The third index identifies a
         specific run of the OAM test. The fourth index element selects a
         single OAM ANCP test result."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamAncpHistoryIndex
    }
    ::= { tmnxOamAncpTestHistoryTable 1 }

TmnxOamAncpTestHistoryEntry      ::= SEQUENCE
{
    tmnxOamAncpHistoryIndex          Unsigned32,
    tmnxOamAncpHistoryAncpString     DisplayString,
    tmnxOamAncpHistoryAccNodeCode    Unsigned32,
    tmnxOamAncpHistoryAccNodeResult  Unsigned32,
    tmnxOamAncpHistoryAccNodeRspStr  DisplayString
}

tmnxOamAncpHistoryIndex          OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in this table is created when the result of a OAM
         ANCP test is determined. The initial 2 instance
         identifier index values identify the tmnxOamPingCtlEntry
         that This ANCP test result belongs
         to.  The tmnxOamAncpHistoryIndex element selects a single OAM
         probe result.

         The agent starts assigning tmnxOamAncpHistoryIndex values at 1 and
         wraps after exceeding the maximum possible value as defined by the
         limit of this object."
    ::= { tmnxOamAncpTestHistoryEntry 1 }

tmnxOamAncpHistoryAncpString     OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..63))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The object tmnxOamAncpHistoryAncpString indicates the value of the
         ancp string used while running this ANCP test."
    ::= { tmnxOamAncpTestHistoryEntry 2 }

tmnxOamAncpHistoryAccNodeCode    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The object tmnxOamAncpHistoryAccNodeCode indicates, if different
         from 0, the return code received from the ANCP access node.
         The value of this field corresponds to the error codes defined in the
         draft-wadhwa-gsmp-l2control-configuration-01:
         - 0x500 Specified access line does not exist
         - 0x501 Loopback test timed out
         - 0x502 Reserved
         - 0x503 DSL line status showtime
         - 0x504 DSL line status idle
         - 0x505 DSL line status silent
         - 0x506 DSL line status training
         - 0x507 DSL line integrity error
         - 0x508 DSLAM resource not available
         - 0x509 Invalid test parameter"
    ::= { tmnxOamAncpTestHistoryEntry 3 }

tmnxOamAncpHistoryAccNodeResult  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The object tmnxOamAncpHistoryAccNodeResult indicates, if different
         from 0, the return result received from the ANCP access node.
         The value of this field corresponds to the result codes defined in the
         draft-wadhwa-gsmp-l2control-configuration-01:
         {
         - 1: NoSuccessAck
         - 2: AckAll
         - 3: Success
         - 4: Failure
         - 5: More
         - 6: ReturnReceipt
         }"
    ::= { tmnxOamAncpTestHistoryEntry 4 }

tmnxOamAncpHistoryAccNodeRspStr  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The object tmnxOamAncpHistoryAccNodeRspStr indicates, if different
         from the empty string, the OAM-loopback-Test-Response-String received
         from the access node, as reply to the requested test."
    ::= { tmnxOamAncpTestHistoryEntry 5 }

tmnxOamP2mpLspPingCtlTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamP2mpLspPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamP2mpLspPingCtlTable (along with tmnxOamPingCtlTable) contains
         the configuration information for Point-to-Multipoint (P2MP) Label
         Switched Path (LSP) ping tests."
    REFERENCE
        "RFC 6425, 'Detecting Data-Plane Failures in Point-to-Multipoint MPLS -
         Extensions to LSP Ping'."
    ::= { tmnxOamPingObjs 21 }

tmnxOamP2mpLspPingCtlEntry       OBJECT-TYPE
    SYNTAX      TmnxOamP2mpLspPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamP2mpLspPingCtlEntry (along with tmnxOamPingCtlEntry) contains
         the configuration information for a P2MP LSP Ping test.

         A row is created when the corresponding tmnxOamPingCtlTestMode is set
         to 'p2mpLspPing'.

         A row is destroyed when the corresponding tmnxOamPingCtlTable row is
         destroyed (using tmnxOamPingCtlRowStatus).

         The values in a particular row in this table cannot be changed when
         the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamP2mpLspPingCtlTable 1 }

TmnxOamP2mpLspPingCtlEntry       ::= SEQUENCE
{
    tmnxOamP2mpLspPingCtlLspName     TLNamedItemOrEmpty,
    tmnxOamP2mpLspPingCtlInstName    TNamedItemOrEmpty,
    tmnxOamP2mpLspPingCtlTtl         Unsigned32,
    tmnxOamP2mpLspPingCtlP2MPId      Unsigned32,
    tmnxOamP2mpLspPingCtlSrcAddrType InetAddressType,
    tmnxOamP2mpLspPingCtlSrcAddr     InetAddress,
    tmnxOamP2mpLspPingCtlGrpAddrType InetAddressType,
    tmnxOamP2mpLspPingCtlGrpAddr     InetAddress,
    tmnxOamP2mpLspPingCtlOptionalTLV INTEGER
}

tmnxOamP2mpLspPingCtlLspName     OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlLspName specifies the administrative
         name of the target RSVP P2MP Labeled Switch Path (LSP) for this OAM
         P2MP LSP Ping test. The LSP name must be unique within the base router
         instance.

         The objects tmnxOamP2mpLspPingCtlLspName and
         tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive.

         An 'inconsistentValue' error is returned when attempting to set the
         value of the tmnxOamP2mpLspPingCtlLspName object to a non default
         value while the value of the tmnxOamP2mpLspPingCtlP2MPId object is
         already set to non default value.

         An 'inconsistentValue' error is returned when the value of
         tmnxOamPingCtlAdminStatus is set to 'enabled' if both the value of
         tmnxOamP2mpLspPingCtlLspName and the value of
         tmnxOamP2mpLspPingCtlP2MPId objects are set to default values."
    DEFVAL      { ''H }
    ::= { tmnxOamP2mpLspPingCtlEntry 1 }

tmnxOamP2mpLspPingCtlInstName    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This parameter identifies an instance of a P2MP LSP, either a primary
         or secondary instance of a RSVP P2MP LSP Tree."
    DEFVAL      { ''H }
    ::= { tmnxOamP2mpLspPingCtlEntry 2 }

tmnxOamP2mpLspPingCtlTtl         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the outermost label time-to-live value.  This is an optional
         parameter for RSVP P2MP LSP. This parameter is not applicable for LDP
         P2MP LSP"
    DEFVAL      { 255 }
    ::= { tmnxOamP2mpLspPingCtlEntry 3 }

tmnxOamP2mpLspPingCtlP2MPId      OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..4294967295)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlP2MPId specifies the identifier of a
         Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this OAM
         P2MP LSP ping test.

         The objects tmnxOamP2mpLspPingCtlP2MPId and
         tmnxOamP2mpLspPingCtlLspName are mutually exclusive.

         An 'inconsistentValue' error is returned when attempting to set the
         value of the tmnxOamP2mpLspPingCtlP2MPId object to a non default value
         while the value of the tmnxOamP2mpLspPingCtlLspName object is already
         set to non default value.

         An 'inconsistentValue' error is returned when the value of
         tmnxOamPingCtlAdminStatus is set to 'enabled' if both the value of
         tmnxOamP2mpLspPingCtlP2MPId and the value of
         tmnxOamP2mpLspPingCtlLspName objects are set to default values."
    DEFVAL      { 0 }
    ::= { tmnxOamP2mpLspPingCtlEntry 4 }

tmnxOamP2mpLspPingCtlSrcAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlSrcAddrType specifies the address
         type of tmnxOamP2mpLspPingCtlSrcAddr.

         When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
         tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
         tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
         should all have default values or should all have non-default values."
    DEFVAL      { unknown }
    ::= { tmnxOamP2mpLspPingCtlEntry 5 }

tmnxOamP2mpLspPingCtlSrcAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlSrcAddr specifies the source address
         of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this
         OAM P2MP LSP ping test. This IP address must be valid unicast address.

         The objects tmnxOamP2mpLspPingCtlSrcAddr and
         tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive.

         When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
         tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
         tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
         should all have default values or should all have non-default values."
    DEFVAL      { ''H }
    ::= { tmnxOamP2mpLspPingCtlEntry 6 }

tmnxOamP2mpLspPingCtlGrpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlGrpAddrType specifies the address
         type of tmnxOamP2mpLspPingCtlGrpAddr.

         When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
         tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
         tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
         should all have default values or should all have non-default values."
    DEFVAL      { unknown }
    ::= { tmnxOamP2mpLspPingCtlEntry 7 }

tmnxOamP2mpLspPingCtlGrpAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlGrpAddr specifies the group address
         of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this
         OAM P2MP LSP ping test. This IP address must be valid multicast
         address.

         The objects tmnxOamP2mpLspPingCtlGrpAddr and
         tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive.

         When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
         tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
         tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
         should all have default values or should all have non-default values."
    DEFVAL      { ''H }
    ::= { tmnxOamP2mpLspPingCtlEntry 8 }

tmnxOamP2mpLspPingCtlOptionalTLV OBJECT-TYPE
    SYNTAX      INTEGER {
        none            (1),
        vpnRecursiveFec (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlOptionalTLV specifies which optional
         Type/Length/Value (TLV) structure to include in the MPLS echo request
         launched for the specified test.

         'vpnRecursiveFec(2)' specifies the proprietary inclusion of an RFC
         6512 'VPN-Recursive FEC Element'.

         'vpnRecursiveFec(2)' is required to successfully ping a P2MP leaf with
         the following characteristics:
         1.  The path between the P2MP root and the targeted leaf is a Virtual
             Private Network (VPN), e.g. an SROS Virtual Private Routed Network
             (VPRN) service.  And ..
         2.  The VPN has an RFC 4364 'Option B' boundary between two Border
             Gateway Protocol (BGP) Autonomous Systems.  And ..
         3.  The leaf resides on an SROS node (with support for this object) on
             the far side of the boundary (with respect to the root).

         A leaf residing on a non-SROS node may not respond (or may respond
         with an error) when 'vpnRecursiveFec(2)' is specified.

         'none(1)' specifies the inclusion of none of the optional TLVs
         described above."
    REFERENCE
        "RFC 4364, 'BGP/MPLS IP Virtual Private Networks (VPNs)', Section 10,
         'Multi-AS Backbones'.
         RFC 6512, 'Using Multipoint LDP When the Backbone Has No Route to the
         Root', Section 3.2.1, 'Non-Segmented Inter-AS P-Tunnels'."
    DEFVAL      { none }
    ::= { tmnxOamP2mpLspPingCtlEntry 9 }

tmnxOamP2mpLspPingIPAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamP2mpLspPingIPAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamP2mpLspPingIPAddressTable contains configured destination IP
         addresses for 'p2mpLspPing' tests."
    ::= { tmnxOamPingObjs 22 }

tmnxOamP2mpLspPingIPAddressEntry OBJECT-TYPE
    SYNTAX      TmnxOamP2mpLspPingIPAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamP2mpLspPingIPAddressEntry contains one configured destination
         IP address for one 'p2mpLspPing' test.

         A 'p2mpLspPing' test can have several configured destination IP
         addresses.

         Rows are created/destroyed using tmnxOamP2mpLspPingCtlIpRowStatus."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamP2mpLspPingCtlIpAddrIndex
    }
    ::= { tmnxOamP2mpLspPingIPAddressTable 1 }

TmnxOamP2mpLspPingIPAddressEntry ::= SEQUENCE
{
    tmnxOamP2mpLspPingCtlIpAddrIndex Unsigned32,
    tmnxOamP2mpLspPingCtlIpRowStatus RowStatus,
    tmnxOamP2mpLspPingCtlIpAddrType  InetAddressType,
    tmnxOamP2mpLspPingCtlIpAddr      InetAddress
}

tmnxOamP2mpLspPingCtlIpAddrIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..5)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The object tmnxOamP2mpLspPingCtlIpAddrIndex specifies the numerical
         row-order in the table."
    ::= { tmnxOamP2mpLspPingIPAddressEntry 1 }

tmnxOamP2mpLspPingCtlIpRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object tmnxOamP2mpLspPingCtlIpRowStatus allows for the creation
         and deletion of rows in the tmnxOamP2mpLspPingIPAddressTable."
    ::= { tmnxOamP2mpLspPingIPAddressEntry 2 }

tmnxOamP2mpLspPingCtlIpAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlIpAddrType specifies the type of
         Internet address stored in tmnxOamP2mpLspPingCtlIpAddr."
    ::= { tmnxOamP2mpLspPingIPAddressEntry 3 }

tmnxOamP2mpLspPingCtlIpAddr      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspPingCtlIpAddr specifies a remote Internet
         address to send P2MP LSP Ping packets for a particular test."
    ::= { tmnxOamP2mpLspPingIPAddressEntry 4 }

tmnxOamEthCfmPingCtlTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamEthCfmPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamEthCfmPingCtlTable contains Ethernet CFM-specific configuration
         information for 'ethCfmLoopback', 'ethCfmTwoWayDelay', and
         'ethCfmTwoWaySlm' tests.

         This table extends the tmnxOamPingCtlTable.  A row is automatically
         created in this table when tmnxOamPingCtlTestMode is set to
         'ethCfmLoopback', 'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm'.

         Deleting a row in tmnxOamPingCtlTable automatically deletes the row
         (if any) with the same index values in tmnxOamEthCfmPingCtlTable."
    ::= { tmnxOamPingObjs 23 }

tmnxOamEthCfmPingCtlEntry        OBJECT-TYPE
    SYNTAX      TmnxOamEthCfmPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamEthCfmPingCtlEntry defines an entry in the
         tmnxOamEthCfmPingCtlTable.  Each index is an object in
         tmnxOamPingCtlTable."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamEthCfmPingCtlTable 1 }

TmnxOamEthCfmPingCtlEntry        ::= SEQUENCE
{
    tmnxOamEthCfmPingCtlTgtMacAddr   MacAddress,
    tmnxOamEthCfmPingCtlSrcMdIndex   Unsigned32,
    tmnxOamEthCfmPingCtlSrcMaIndex   Unsigned32,
    tmnxOamEthCfmPingCtlSrcMepId     Dot1agCfmMepIdOrZero,
    tmnxOamEthCfmPingCtlRemoteMepId  Dot1agCfmMepIdOrZero
}

tmnxOamEthCfmPingCtlTgtMacAddr   OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmPingCtlTgtMacAddr specifies the destination
         MAC address for the test.

         A non-zero unicast destination MAC address is required in each test frame
         sent for the test.  The destination MAC address can be specified directly
         (using this object) or indirectly (see the DESCRIPTION of
         tmnxOamEthCfmPingCtlRemoteMepId).

         Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and
         tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value.
         Otherwise, an attempt to administratively enable the test (using
         tmnxOamSaaCtlAdminStatus) will fail."
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamEthCfmPingCtlEntry 1 }

tmnxOamEthCfmPingCtlSrcMdIndex   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmPingCtlSrcMdIndex specifies the source CFM
         maintenance domain index for the test.  Zero is the null CFM
         maintenance domain index."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmPingCtlEntry 2 }

tmnxOamEthCfmPingCtlSrcMaIndex   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmPingCtlSrcMaIndex specifies the source CFM
         maintenance association index for the test.  Zero is the null CFM
         maintenance association index."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmPingCtlEntry 3 }

tmnxOamEthCfmPingCtlSrcMepId     OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmPingCtlSrcMepId specifies the source
         Maintenance association End Point Identifier (MEP ID) for the test.
         Zero is the null MEP ID."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmPingCtlEntry 4 }

tmnxOamEthCfmPingCtlRemoteMepId  OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote
         Maintenance association End Point Identifier (MEP ID) for the test.

         A non-zero unicast destination MAC address is required in each test frame
         sent for the test.  The destination MAC address can be specified directly
         (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this
         object).

         Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and
         tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value.
         Otherwise, an attempt to administratively enable the test (using
         tmnxOamSaaCtlAdminStatus) will fail.

         Suppose this object is assigned a non-default value.  Then, at the
         start of each test run, SROS reads
         TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the
         destination MAC address to use for the test run.

         The following index values are used for the read:
            tmnxOamEthCfmPingCtlSrcMdIndex,
            tmnxOamEthCfmPingCtlSrcMaIndex,
            tmnxOamEthCfmPingCtlSrcMepId,
            tmnxOamEthCfmPingCtlRemoteMepId.

         If a destination MAC address is not found, no test frames will be sent
         for the test run.  The number of frames to be sent during a test run is
         configured using tmnxOamPingCtlProbeCount.

         Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of
         tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the
         hardware hosting the test's far end is replaced (meaning a new
         destination MAC address is present), the test does not need to be
         reconfigured."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmPingCtlEntry 5 }

tmnxOamVccvPgTgFec128CtlTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVccvPgTgFec128CtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvPgTgFec128CtlTable contains the target information for VCCV
         (Virtual Circuit Connectivity Verification) ping tests which switch to
         downstream FEC (Forward Equivalence Class) 128 segments."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    ::= { tmnxOamPingObjs 24 }

tmnxOamVccvPgTgFec128CtlEntry    OBJECT-TYPE
    SYNTAX      TmnxOamVccvPgTgFec128CtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvPgTgFec128CtlEntry contains the target information for a
         VCCV ping test which switches to a downstream FEC 128 segment.

         The values in a row are used to fill a 'FEC 128 Pseudowire' sub-TLV
         (Type, Length, Value) within the 'Target FEC Stack' TLV within the
         launched VCCV ping request.

         A row is created when the test's tmnxOamVccvPingCtlSwitTgtFecType is
         set to 'fec128(2)'.

         A row is destroyed when the tmnxOamVccvPingCtlTable row is destroyed.

         All the objects in a row must be set in one SNMP Set PDU.  Otherwise,
         the SNMP Set PDU will be rejected."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamVccvPgTgFec128CtlTable 1 }

TmnxOamVccvPgTgFec128CtlEntry    ::= SEQUENCE
{
    tmnxOamVccvPgTgFec128CtlSrcAddrT InetAddressType,
    tmnxOamVccvPgTgFec128CtlSrcAddr  InetAddress,
    tmnxOamVccvPgTgFec128CtlDstAddrT InetAddressType,
    tmnxOamVccvPgTgFec128CtlDstAddr  InetAddress,
    tmnxOamVccvPgTgFec128CtlPwId     Unsigned32,
    tmnxOamVccvPgTgFec128CtlPwType   Unsigned32
}

tmnxOamVccvPgTgFec128CtlSrcAddrT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgFec128CtlSrcAddrT specifies the address
         type of tmnxOamVccvPgTgFec128CtlSrcAddr."
    DEFVAL      { unknown }
    ::= { tmnxOamVccvPgTgFec128CtlEntry 1 }

tmnxOamVccvPgTgFec128CtlSrcAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgFec128CtlSrcAddr specifies the value to be
         copied into the Sender's PE Address (Sender's Provider Edge Address)
         field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC
         Stack' TLV within the launched VCCV ping request."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    DEFVAL      { ''H }
    ::= { tmnxOamVccvPgTgFec128CtlEntry 2 }

tmnxOamVccvPgTgFec128CtlDstAddrT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgFec128CtlDstAddrT specifies the address
         type of tmnxOamVccvPgTgFec128CtlDstAddr."
    DEFVAL      { unknown }
    ::= { tmnxOamVccvPgTgFec128CtlEntry 3 }

tmnxOamVccvPgTgFec128CtlDstAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgFec128CtlDstAddr specifies the value to be
         copied into the 'Remote PE Address' (Remote Provider Edge Address)
         field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC
         Stack' TLV within the launched VCCV ping request."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    DEFVAL      { ''H }
    ::= { tmnxOamVccvPgTgFec128CtlEntry 4 }

tmnxOamVccvPgTgFec128CtlPwId     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgFec128CtlPwId specifies the value to be
         copied into the 'PW ID' (Pseudowire Identifier) field of the 'FEC 128
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV ping request.

         Zero indicates no Pseudowire Identifier has been configured."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgFec128CtlEntry 5 }

tmnxOamVccvPgTgFec128CtlPwType   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgFec128CtlPwType specifies the value to be
         copied into the 'PW Type' (Pseudowire Type) field of the 'FEC 128
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV ping request.  The code points are defined in RFC 4446.

         SROS supports services corresponding to the following RFC 4446 PW Type
         code points.

         PW Type    Description
         -------    ---------------------------------------
          2         ATM AAL5 SDU VCC transport
          3         ATM transparent cell transport
          5         Ethernet
          9         ATM n-to-one VCC cell transport
         10         ATM n-to-one VPC cell transport
         17         Structure-agnostic E1 over packet
         18         Structure-agnostic T1 (DS1) over packet
         21         CES over PSN basic mode
         23         CES over PSN TDM with CAS

         Zero indicates no Pseudowire Type has been configured."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)').
         RFC 4446, 'IANA Allocations for Pseudowire Edge to Edge Emulation
         (PWE3)', Section 3.2, 'MPLS Pseudowire Type'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgFec128CtlEntry 6 }

tmnxOamVccvPgTgStaticCtlTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVccvPgTgStaticCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvPgTgStaticCtlTable contains the target information for VCCV
         (Virtual Circuit Connectivity Verification) ping tests which switch to
         downstream static (i.e. MPLS-TP) segments."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamPingObjs 25 }

tmnxOamVccvPgTgStaticCtlEntry    OBJECT-TYPE
    SYNTAX      TmnxOamVccvPgTgStaticCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvPgTgStaticCtlEntry contains the target information for a
         VCCV ping test which switches to a downstream static (i.e. MPLS-TP)
         segment.

         The values in a row are used to fill a 'Static Pseudowire' sub-TLV
         (Type, Length, Value) within the 'Target FEC Stack' TLV within the
         launched VCCV ping request.

         A row is created when the test's tmnxOamVccvPingCtlSwitTgtFecType is
         set to 'static(3)'.

         A row is destroyed when the tmnxOamVccvPingCtlTable row is destroyed.

         All the objects in a row must be set in one SNMP Set PDU.  Otherwise,
         the SNMP Set PDU will be rejected."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamVccvPgTgStaticCtlTable 1 }

TmnxOamVccvPgTgStaticCtlEntry    ::= SEQUENCE
{
    tmnxOamVccvPgTgStaticCtlAgi      TmnxVPNRouteDistinguisher,
    tmnxOamVccvPgTgStaticCtlSaiiGlbl TmnxPwGlobalIdOrZero,
    tmnxOamVccvPgTgStaticCtlSaiiNode TmnxMplsTpNodeID,
    tmnxOamVccvPgTgStaticCtlSaiiAcId Unsigned32,
    tmnxOamVccvPgTgStaticCtlTaiiGlbl TmnxPwGlobalIdOrZero,
    tmnxOamVccvPgTgStaticCtlTaiiNode TmnxMplsTpNodeID,
    tmnxOamVccvPgTgStaticCtlTaiiAcId Unsigned32
}

tmnxOamVccvPgTgStaticCtlAgi      OBJECT-TYPE
    SYNTAX      TmnxVPNRouteDistinguisher
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgStaticCtlAgi specifies the value to be
         copied into the 'Service Identifier' field of the 'Static Pseudowire'
         sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping
         request.  As specified in RFC 6426, the 'Service Identifier' field may
         be filled with an AGI (Attachment Group Identifier).

         The all-zeroes value indicates no Service Identifier has been
         configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 4446, 'IANA Allocations for Pseudowire Edge to Edge Emulation
         (PWE3)', section 3.4.2, 'Attachment Group Identifier (AGI) Type'."
    DEFVAL      { '0000000000000000'H }
    ::= { tmnxOamVccvPgTgStaticCtlEntry 1 }

tmnxOamVccvPgTgStaticCtlSaiiGlbl OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgStaticCtlSaiiGlbl specifies the value to
         be copied into the 'Source Global ID' field of the 'Static Pseudowire'
         sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV
         ping request.

         Zero indicates no Source Global ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 3,
         'Uniquely Identifying an Operator - the Global_ID'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgStaticCtlEntry 2 }

tmnxOamVccvPgTgStaticCtlSaiiNode OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgStaticCtlSaiiNode specifies the value to
         be copied into the 'Source Node ID' field of the 'Static Pseudowire'
         sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV
         ping request.

         Zero indicates no Source Node ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 4,
         'Node and Interface Identifiers'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgStaticCtlEntry 3 }

tmnxOamVccvPgTgStaticCtlSaiiAcId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgStaticCtlSaiiAcId specifies the value to
         be copied into the 'Source AC-ID' (Source Attachment Circuit
         Identifier) field of the 'Static Pseudowire' sub-TLV within the
         'Target FEC Stack' TLV within the launched VCCV ping request.

         Zero indicates no Source AC-ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', section 3.2, 'AII Type 2'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgStaticCtlEntry 4 }

tmnxOamVccvPgTgStaticCtlTaiiGlbl OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgStaticCtlTaiiGlbl specifies the value to
         be copied into the 'Destination Global ID' field of the 'Static
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV ping request.

         Zero indicates no Destination Global ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 3,
         'Uniquely Identifying an Operator - the Global_ID'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgStaticCtlEntry 5 }

tmnxOamVccvPgTgStaticCtlTaiiNode OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgStaticCtlTaiiNode specifies the value to
         be copied into the 'Destination Node ID' field of the 'Static
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV ping request.

         Zero indicates no Destination Node ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 4,
         'Node and Interface Identifiers'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgStaticCtlEntry 6 }

tmnxOamVccvPgTgStaticCtlTaiiAcId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvPgTgStaticCtlTaiiAcId specifies the value to
         be copied into the 'Destination AC-ID' (Destination Attachment Circuit
         Identifier) field of the 'Static Pseudowire' sub-TLV within the
         'Target FEC Stack' TLV within the launched VCCV ping request.

         Zero indicates no Destination AC-ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', section 3.2, 'AII Type 2'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvPgTgStaticCtlEntry 7 }

tmnxOamVxlanPingCtlTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVxlanPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVxlanPingCtlTable (along with tmnxOamPingCtlTable) contains the
         configuration information for VXLAN (Virtual Extensible Local Area
         Network) ping tests."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014.
         RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014."
    ::= { tmnxOamPingObjs 26 }

tmnxOamVxlanPingCtlEntry         OBJECT-TYPE
    SYNTAX      TmnxOamVxlanPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVxlanPingCtlEntry (along with tmnxOamPingCtlEntry) contains the
         configuration information for a VXLAN ping test.

         A row is created when the corresponding tmnxOamPingCtlTestMode is set
         to 'vxlanPing'.

         A row is destroyed when the corresponding tmnxOamPingCtlTable row is
         destroyed (using tmnxOamPingCtlRowStatus).

         The values in a particular row in this table cannot be changed when
         the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014.
         RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamVxlanPingCtlTable 1 }

TmnxOamVxlanPingCtlEntry         ::= SEQUENCE
{
    tmnxOamVxlanPingCtlNetworkId     Unsigned32,
    tmnxOamVxlanPingCtlReplyMode     INTEGER,
    tmnxOamVxlanPingCtlIFlag         Unsigned32,
    tmnxOamVxlanPingCtlTestId        Unsigned32,
    tmnxOamVxlanPingCtlOutSrcUdpPt   Unsigned32,
    tmnxOamVxlanPingCtlOutIpTtl      Unsigned32,
    tmnxOamVxlanPingCtlInL2DestMac   MacAddress,
    tmnxOamVxlanPingCtlInIpSrcAddrT  InetAddressType,
    tmnxOamVxlanPingCtlInIpSrcAddr   InetAddress,
    tmnxOamVxlanPingCtlInIpDstAddrT  InetAddressType,
    tmnxOamVxlanPingCtlInIpDstAddr   InetAddress,
    tmnxOamVxlanPingCtlEndSysMacAddr MacAddress,
    tmnxOamVxlanPingCtlReflectPad    TruthValue
}

tmnxOamVxlanPingCtlNetworkId     OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..16777215)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlNetworkId specifies the VXLAN Network
         Identifier (VNI) of the VXLAN network to be tested.  The value is
         copied into the VXLAN Network Identifier field of the VXLAN Header of
         the launched OAM echo request.

         Zero indicates no VXLAN Network Identifier has been configured.  The
         test will fail if tmnxOamVxlanPingCtlNetworkId is zero."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    DEFVAL      { 0 }
    ::= { tmnxOamVxlanPingCtlEntry 1 }

tmnxOamVxlanPingCtlReplyMode     OBJECT-TYPE
    SYNTAX      INTEGER {
        udp     (2),
        overlay (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlReplyMode specifies the encapsulation
         to be used in the OAM echo reply.  The value is copied into the Reply
         Mode field of the Generic Overlay OAM structure of the launched OAM
         echo request.  The replying node uses the value to choose the
         encapsulation of the OAM echo reply.

         Code points:
             udp(2)     - reply using an IPv4 UDP packet
             overlay(3) - reply via the overlay segment.

         The Jain draft's 'Do Not Reply' option (i.e. the Reply Mode with code
         point 1) is not supported."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 5.3, 'Generic Overlay
         OAM Packet Format'."
    DEFVAL      { udp }
    ::= { tmnxOamVxlanPingCtlEntry 2 }

tmnxOamVxlanPingCtlIFlag         OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlIFlag specifies the I flag value to be
         used for the test.  The value is copied into the I flag field of the
         VXLAN Header of the launched OAM echo request."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    DEFVAL      { 0 }
    ::= { tmnxOamVxlanPingCtlEntry 3 }

tmnxOamVxlanPingCtlTestId        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlTestId specifies a unique identifier
         for the test.  The value is copied into the Originator Handle field of
         the Generic Overlay OAM structure of the launched OAM echo request.

         Zero indicates no VXLAN Test Identifier has been configured.  The test
         will fail if tmnxOamVxlanPingCtlTestId is zero."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 5.3, 'Generic Overlay
         OAM Packet Format'."
    DEFVAL      { 0 }
    ::= { tmnxOamVxlanPingCtlEntry 4 }

tmnxOamVxlanPingCtlOutSrcUdpPt   OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlOutSrcUdpPt specifies the outer source
         UDP port to be used for the test.

         If tmnxOamVxlanPingCtlOutSrcUdpPt is zero, an SROS-computed UDP port
         number is copied into the Source Port field of the Outer UDP Header of
         the launched OAM echo request.

         If tmnxOamVxlanPingCtlOutSrcUdpPt is non-zero, the given value is
         copied into the Source Port field of the Outer UDP Header of the
         launched OAM echo request."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    DEFVAL      { 0 }
    ::= { tmnxOamVxlanPingCtlEntry 5 }

tmnxOamVxlanPingCtlOutIpTtl      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlOutIpTtl specifies the outer IP Time To
         Live value to be used for the test.  The value is copied into the Time
         To Live field of the Outer IPv4 Header of the launched OAM echo
         request."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    DEFVAL      { 255 }
    ::= { tmnxOamVxlanPingCtlEntry 6 }

tmnxOamVxlanPingCtlInL2DestMac   OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlInL2DestMac specifies the inner
         Destination MAC address to be used for the test.  The value is copied
         into the Inner Destination MAC Address field of the Inner Ethernet
         Header of the launched OAM echo request."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamVxlanPingCtlEntry 7 }

tmnxOamVxlanPingCtlInIpSrcAddrT  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlInIpSrcAddrT specifies the type of
         address in tmnxOamVxlanPingCtlInIpSrcAddr."
    DEFVAL      { ipv4 }
    ::= { tmnxOamVxlanPingCtlEntry 8 }

tmnxOamVxlanPingCtlInIpSrcAddr   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlInIpSrcAddr specifies the inner source
         IP address to be used for the test.  The value is copied into the
         Source IP Address field of the Inner IP Header of the launched OAM Echo
         request.

         For snmpset, only IPv4 addresses are supported.

         If this object has its default value when tmnxOamPingCtlServiceId is
         configured for the test, SROS copies the service's source VXLAN
         Tunnel Endpoint (VTEP) into tmnxOamVxlanPingCtlInIpSrcAddrT and
         tmnxOamVxlanPingCtlInIpSrcAddr.  The copied VTEP can be IPv4 or
         IPv6.  The test fails to start when tmnxOamVxlanPingCtlInIpSrcAddrT
         is 'ipv6(2)'."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 7.1, 'Encoding of Inner
         Header for Echo Request in Layer 2 Context'."
    DEFVAL      { '00000000'H }
    ::= { tmnxOamVxlanPingCtlEntry 9 }

tmnxOamVxlanPingCtlInIpDstAddrT  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlInIpDstAddrT specifies the type of
         address in tmnxOamVxlanPingCtlInIpDstAddr."
    DEFVAL      { ipv4 }
    ::= { tmnxOamVxlanPingCtlEntry 10 }

tmnxOamVxlanPingCtlInIpDstAddr   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlInIpDstAddr specifies the inner
         destination IP address to be used for the test.  The value is copied
         into the Destination IP Address field of the Inner IP Header of the
         launched OAM Echo request.

         Addresses in the address block 127.0.0.0/8 are accepted.  The default
         address is 127.0.0.1."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 7.1, 'Encoding of Inner
         Header for Echo Request in Layer 2 Context'."
    DEFVAL      { '7f000001'H }
    ::= { tmnxOamVxlanPingCtlEntry 11 }

tmnxOamVxlanPingCtlEndSysMacAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlEndSysMacAddr specifies the end system
         MAC address to be verified by the test.  The value is copied into the
         MAC Address #1 field of the End-System MAC Sub-TLV of the launched OAM
         Echo request."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 9.1.1, 'Sub-TLV for
         Validating End-System MAC Address'."
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamVxlanPingCtlEntry 12 }

tmnxOamVxlanPingCtlReflectPad    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingCtlReflectPad specifies whether or not to
         copy the pad TLV from the OAM echo request to the OAM echo response.

         The combination of tmnxOamVxlanPingCtlReflectPad='true(1)' and
         tmnxOamPingCtlSize=0 is rejected, because tmnxOamPingCtlSize=0
         indicates there is no pad TLV to be copied.

         The combination of tmnxOamVxlanPingCtlReflectPad='true(1)' and
         tmnxOamVxlanPingCtlReplyMode='udp(2)' is rejected."
    DEFVAL      { false }
    ::= { tmnxOamVxlanPingCtlEntry 13 }

tmnxOamVxlanPingHistoryTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVxlanPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVxlanPingHistoryTable (along with tmnxOamPingHistoryTable)
         contains the information obtained from Virtual Extensible Local Area
         Network (VXLAN) Echo Reply PDUs."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014.
         RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014."
    ::= { tmnxOamPingObjs 27 }

tmnxOamVxlanPingHistoryEntry     OBJECT-TYPE
    SYNTAX      TmnxOamVxlanPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVxlanPingHistoryEntry (along with tmnxOamPingHistoryEntry)
         contains the information obtained from one VXLAN Echo Reply PDU.

         A row is created when a VXLAN Echo Reply PDU (associated with a
         managed 'vxlanPing' test) arrives.

         A row is destroyed when the corresponding tmnxOamPingHistoryEntry is
         destroyed.

         The first two indices specify a 'vxlanPing' test.  The third index
         specifies a test run (started using tmnxOamPingCtlAdminStatus).  The
         fourth index specifies a VXLAN Echo Reply PDU."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 7.3.4, 'Receiving VXLAN
         Echo Reply'."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamPingHistoryIndex
    }
    ::= { tmnxOamVxlanPingHistoryTable 1 }

TmnxOamVxlanPingHistoryEntry     ::= SEQUENCE
{
    tmnxOamVxlanPingHistReturnCode   Unsigned32,
    tmnxOamVxlanPingHistRtrnSubCode  Unsigned32,
    tmnxOamVxlanPingHistValidationRC Unsigned32,
    tmnxOamVxlanPingHistNetworkId    Unsigned32,
    tmnxOamVxlanPingHistOutIpTtl     Unsigned32
}

tmnxOamVxlanPingHistReturnCode   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingHistReturnCode indicates the value copied
         from the Return Code field of the Generic Overlay OAM Packet structure
         of the VXLAN Echo Reply PDU.

         Code points include (but are not restricted to) the following.

         Value    Interpretation
         -----    -------------------------------
         0        no return code
         1        malformed echo request received
         2        overlay segment not present
         3        overlay segment not operational
         4        OK"
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 5.3, 'Generic Overlay
         OAM Packet Format'."
    ::= { tmnxOamVxlanPingHistoryEntry 1 }

tmnxOamVxlanPingHistRtrnSubCode  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingHistRtrnSubCode indicates the value
         copied from the Return Subcode field of the Generic Overlay OAM Packet
         structure of the VXLAN Echo Reply PDU."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 5.3, 'Generic Overlay
         OAM Packet Format'."
    ::= { tmnxOamVxlanPingHistoryEntry 2 }

tmnxOamVxlanPingHistValidationRC OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingHistValidationRC indicates the value
         copied from the 'Return Code #1' field of the 'Sub-TLV for Validating
         End-System MAC Address' of the VXLAN Echo Reply PDU."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014, Section 9.1.1, 'Sub-TLV for
         Validating End-System MAC Address'."
    ::= { tmnxOamVxlanPingHistoryEntry 3 }

tmnxOamVxlanPingHistNetworkId    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16777215)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingHistNetworkId indicates the value of the
         VXLAN Network Identifier (VNI) field of the VXLAN Header of the VXLAN
         Echo Reply PDU."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    ::= { tmnxOamVxlanPingHistoryEntry 4 }

tmnxOamVxlanPingHistOutIpTtl     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingHistOutIpTtl indicates the value of the
         Time To Live field of the Outer IPv4 Header of the VXLAN Echo Reply
         PDU."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    ::= { tmnxOamVxlanPingHistoryEntry 5 }

tmnxOamBfdOnLspPingResultsTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBfdOnLspPingResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBfdOnLspPingResultsTable contains the information obtained
         during the RFC 5884 procedures used to bootstrap and periodically
         verify Bidirectional Forwarding Detection (BFD) sessions on Label
         Switched Paths (LSPs).  The bootstrap and verification procedures use
         LSP ping echo request and reply packets."
    REFERENCE
        "RFC 5884, 'Bidirectional Forwarding Detection (BFD) for MPLS Label
         Switched Paths (LSPs)', Section 3.2, 'Using BFD in Conjunction with LSP
         Ping'."
    ::= { tmnxOamPingObjs 28 }

tmnxOamBfdOnLspPingResultsEntry  OBJECT-TYPE
    SYNTAX      TmnxOamBfdOnLspPingResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBfdOnLspPingResultsEntry contains the information obtained
         during the RFC 5884 procedures used to bootstrap and periodically
         verify a BFD session on an LSP.

         A row is created when an RFC 5884 BFD-on-LSP session starts its
         bootstrap procedure.  A row is destroyed when the BFD-on-LSP session
         disconnects."
    REFERENCE
        "RFC 5884, 'Bidirectional Forwarding Detection (BFD) for MPLS Label
         Switched Paths (LSPs)', Section 3.2, 'Using BFD in Conjunction with LSP
         Ping'."
    INDEX       { tmnxOamBfdOnLspLocalBfdDiscrim }
    ::= { tmnxOamBfdOnLspPingResultsTable 1 }

TmnxOamBfdOnLspPingResultsEntry  ::= SEQUENCE
{
    tmnxOamBfdOnLspLocalBfdDiscrim   Unsigned32,
    tmnxOamBfdOnLspRemoteBfdDiscrim  Unsigned32,
    tmnxOamBfdOnLspRemoteAddressType InetAddressType,
    tmnxOamBfdOnLspRemoteAddress     InetAddress,
    tmnxOamBfdOnLspLspName           TLNamedItemOrEmpty,
    tmnxOamBfdOnLspPingReturnCode    TmnxOamPingRtnCode,
    tmnxOamBfdOnLspPingReturnSubcode Unsigned32,
    tmnxOamBfdOnLspPingTxCount       Unsigned32,
    tmnxOamBfdOnLspPingRxCount       Unsigned32,
    tmnxOamBfdOnLspPathState         INTEGER,
    tmnxOamBfdOnLspPingTxInterval    Unsigned32,
    tmnxOamBfdOnLspBootStrRetryCount Unsigned32,
    tmnxOamBfdOnLspFecType           TmnxBfdOnLspSessFecType,
    tmnxOamBfdOnLspPrefixType        InetAddressType,
    tmnxOamBfdOnLspPrefix            InetAddress,
    tmnxOamBfdOnLspPrefixLen         InetAddressPrefixLength,
    tmnxOamBfdOnLspSourceAddressType InetAddressType,
    tmnxOamBfdOnLspSourceAddress     InetAddress,
    tmnxOamBfdOnLspOperState         INTEGER
}

tmnxOamBfdOnLspLocalBfdDiscrim   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspLocalBfdDiscrim specifies the local BFD
         discriminator for a BFD-on-LSP session.  The local discriminator is
         this system's identifier of the BFD session."
    REFERENCE
        "RFC 5880, 'Bidirectional Forwarding Detection (BFD)', Section 6.3,
         'Demultiplexing and the Discriminator Fields'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 1 }

tmnxOamBfdOnLspRemoteBfdDiscrim  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspRemoteBfdDiscrim indicates the remote BFD
         discriminator for the BFD-on-LSP session identified by
         tmnxOamBfdOnLspLocalBfdDiscrim.  The remote discriminator is the far
         end system's identifier of the BFD session.

         Zero is returned if the bootstrap has not completed successfully."
    REFERENCE
        "RFC 5880, 'Bidirectional Forwarding Detection (BFD)', Section 6.3,
         'Demultiplexing and the Discriminator Fields'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 2 }

tmnxOamBfdOnLspRemoteAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspRemoteAddressType indicates the type of
         address stored in tmnxOamBfdOnLspRemoteAddress."
    ::= { tmnxOamBfdOnLspPingResultsEntry 3 }

tmnxOamBfdOnLspRemoteAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspRemoteAddress (in conjunction with
         tmnxOamBfdOnLspRemoteAddressType) indicates the IP address of the node
         which sent the most recent LSP ping echo reply for the BFD-on-LSP
         session identified by tmnxOamBfdOnLspLocalBfdDiscrim.

         If the LSP is operating correctly, the reply is sent by the far end of
         the BFD-on-LSP session."
    ::= { tmnxOamBfdOnLspPingResultsEntry 4 }

tmnxOamBfdOnLspLspName           OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspLspName indicates the LSP name associated
         with the Resource Reservation Protocol (RSVP) BFD-on-LSP session
         identified by tmnxOamBfdOnLspLocalBfdDiscrim.  LSP names are configured
         using TIMETRA-MPLS-MIB::vRtrMplsLspName.

         When the value of tmnxOamBfdOnLspFecType is not 'rsvp(1)', the value
         of this object is the empty string."
    ::= { tmnxOamBfdOnLspPingResultsEntry 5 }

tmnxOamBfdOnLspPingReturnCode    OBJECT-TYPE
    SYNTAX      TmnxOamPingRtnCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPingReturnCode indicates the status of the
         most recent LSP ping echo reply received for the BFD-on-LSP session
         identified by tmnxOamBfdOnLspLocalBfdDiscrim."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.1, 'Return Codes'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 6 }

tmnxOamBfdOnLspPingReturnSubcode OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPingReturnSubcode indicates the value
         present in the RFC 4379 Return Subcode (RSC) field of the most recent
         LSP ping echo reply for the BFD-on-LSP session identified by
         tmnxOamBfdOnLspLocalBfdDiscrim."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.1, 'Return Codes'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 7 }

tmnxOamBfdOnLspPingTxCount       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPingTxCount indicates the number of LSP
         ping echo request packets sent for the BFD-on-LSP session identified
         by tmnxOamBfdOnLspLocalBfdDiscrim."
    ::= { tmnxOamBfdOnLspPingResultsEntry 8 }

tmnxOamBfdOnLspPingRxCount       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPingRxCount indicates the number of LSP
         ping echo reply packets received for the BFD-on-LSP session identified
         by tmnxOamBfdOnLspLocalBfdDiscrim."
    ::= { tmnxOamBfdOnLspPingResultsEntry 9 }

tmnxOamBfdOnLspPathState         OBJECT-TYPE
    SYNTAX      INTEGER {
        unknown  (1),
        active   (2),
        inactive (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPathState indicates the state of the path
         hosting the RSVP BFD-on-LSP session identified by
         tmnxOamBfdOnLspLocalBfdDiscrim.

         Code points:
         unknown  (1) - the state of the path hosting the BFD-on-LSP session is
                        unknown
         active   (2) - the BFD-on-LSP session is running on the active path
         inactive (3) - the BFD-on-LSP session is running on the inactive path

         When the value of tmnxOamBfdOnLspFecType is not 'rsvp(1)', the value
         of this object is 'unknown(1)'."
    REFERENCE
        "RFC 4090, 'Fast Reroute Extensions to RSVP-TE for LSP Tunnels', Section
         3.2, 'Facility Backup'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 10 }

tmnxOamBfdOnLspPingTxInterval    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPingTxInterval indicates the transmission
         interval for LSP ping request PDUs sent during periodic verification
         of the BFD-on-LSP session identified by
         tmnxOamBfdOnLspLocalBfdDiscrim.

         This value is configured using
         TIMETRA-MPLS-MIB::vRtrMplsLspBfdPingIntvl.  A read-only copy of the
         value is available here for the convenience of a manager wishing to
         read the value using a local BFD discriminator as the index."
    REFERENCE
        "RFC 5884, 'Bidirectional Forwarding Detection (BFD) for MPLS Label
         Switched Paths (LSPs)', Section 4, 'Theory of Operation'"
    ::= { tmnxOamBfdOnLspPingResultsEntry 11 }

tmnxOamBfdOnLspBootStrRetryCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspBootStrRetryCount indicates the current
         number of retries started while attempting to bootstrap the BFD-on-LSP
         session identified by tmnxOamBfdOnLspLocalBfdDiscrim.

         If the bootstrap completed successfully on the first attempt, zero is
         returned."
    ::= { tmnxOamBfdOnLspPingResultsEntry 12 }

tmnxOamBfdOnLspFecType           OBJECT-TYPE
    SYNTAX      TmnxBfdOnLspSessFecType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspFecType indicates the Forwarding
         Equivalence Class (FEC) type of the BFD-on-LSP session identified by
         tmnxOamBfdOnLspLocalBfdDiscrim.

         This release supports code points 'rsvp(1)' and 'ldp(2)'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 13 }

tmnxOamBfdOnLspPrefixType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPrefixType indicates the type of address
         stored in tmnxOamBfdOnLspPrefix."
    ::= { tmnxOamBfdOnLspPingResultsEntry 14 }

tmnxOamBfdOnLspPrefix            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPrefix indicates (in conjunction with
         tmnxOamBfdOnLspPrefixType and tmnxOamBfdOnLspPrefixLen) the prefix
         which identifies the Label Distribution Protocol (LDP) LSP which hosts
         the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim.

         When tmnxOamBfdOnLspFecType is 'rsvp(1)', the three prefix objects
         have the following values.
            tmnxOamBfdOnLspPrefixType : 'unknown(0)'
            tmnxOamBfdOnLspPrefix     : empty
            tmnxOamBfdOnLspPrefixLen  : 0."
    REFERENCE
        "RFC 5036, 'LDP Specification', Section 3.4.1, 'FEC TLV'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 15 }

tmnxOamBfdOnLspPrefixLen         OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength (0..128)
    UNITS       "bits"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspPrefixLen indicates the number of
         significant bits in the prefix defined by tmnxOamBfdOnLspPrefixType,
         tmnxOamBfdOnLspPrefix, and tmnxOamBfdOnLspPrefixLen."
    ::= { tmnxOamBfdOnLspPingResultsEntry 16 }

tmnxOamBfdOnLspSourceAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspSourceAddressType indicates the type of
         address stored in tmnxOamBfdOnLspSourceAddress."
    ::= { tmnxOamBfdOnLspPingResultsEntry 17 }

tmnxOamBfdOnLspSourceAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspSourceAddress (in conjunction with
         tmnxOamBfdOnLspSourceAddressType) indicates the source IP address of
         the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim."
    ::= { tmnxOamBfdOnLspPingResultsEntry 18 }

tmnxOamBfdOnLspOperState         OBJECT-TYPE
    SYNTAX      INTEGER {
        bootstrapInProg                  (1),
        bootstrappedNoPeriodicVerif      (2),
        bootstrappedSendingPeriodicVerif (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspOperState indicates the operational state
         (with respect to the RFC 5884 LSP Ping procedures) of the BFD-on-LSP
         session identified by tmnxOamBfdOnLspLocalBfdDiscrim.

         Code Points
         'bootstrapInProg(1)' - the session is being bootstrapped using LSP
             ping, as described in RFC 5884 Section 6.
         'bootstrappedNoPeriodicVerif(2)' - the bootstrap completed
             successfully.  This is the success state for a session which has
             periodic verification of the LSP (using LSP ping) disabled.
             Periodic verification is disabled by setting the session's LSP ping
             interval (e.g.
             TIMETRA-LDP-NG-MIB::vRtrLdpNgBfdOnLspPfxListPingIntv) to zero.
         'bootstrappedSendingPeriodicVerif(3)' - the bootstrap completed
             successfully, and the session is sending LSP pings to periodically
             verify the LSP (as described in RFC 5884 Section 3.2).  This is the
             success state for a session which has periodic verification of the
             session enabled.

         The BFD-level operational state of a BFD-on-LSP session is given by
         TIMETRA-BFD-MIB::tmnxBfdOnLspSessOperState."
    REFERENCE
        "RFC 5884, 'Bidirectional Forwarding Detection (BFD) for MPLS Label
         Switched Paths (LSPs)', Section 3.2, 'Using BFD in Conjunction with LSP
         Ping'.
         RFC 5884, 'Bidirectional Forwarding Detection (BFD) for MPLS Label
         Switched Paths (LSPs)', Section 6, 'Session Establishment'."
    ::= { tmnxOamBfdOnLspPingResultsEntry 19 }

tmnxOamVxlanPingResultsTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVxlanPingResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVxlanPingResultsTable contains results of VXLAN (Virtual
         Extensible Local Area Network) ping tests."
    REFERENCE
        "IETF draft-jain-nvo3-overlay-oam-02, 'Generic Overlay OAM and Datapath
         Failure Detection', October 22, 2014.
         RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014."
    ::= { tmnxOamPingObjs 29 }

tmnxOamVxlanPingResultsEntry     OBJECT-TYPE
    SYNTAX      TmnxOamVxlanPingResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVxlanPingResultsEntry contains results of one 'vxlanPing'
         test run.  tmnxOamPingResultsEntry contains additional results for the
         test run.

         A tmnxOamVxlanPingResultsEntry is created/destroyed when a
         tmnxOamPingResultsEntry is created/destroyed for a 'vxlanPing' test.

         tmnxOamPingCtlEntry and tmnxOamVxlanPingCtlEntry are used to configure
         and start a 'vxlanPing' test.

         tmnxOamVxlanPingHistoryEntry contains per-probe results for a
         'vxlanPing' test run."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex
    }
    ::= { tmnxOamVxlanPingResultsTable 1 }

TmnxOamVxlanPingResultsEntry     ::= SEQUENCE
{
    tmnxOamVxlanPingResOutSrcAddrTyp InetAddressType,
    tmnxOamVxlanPingResOutSrcAddress InetAddress
}

tmnxOamVxlanPingResOutSrcAddrTyp OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingResOutSrcAddrTyp indicates the address
         type of tmnxOamVxlanPingResOutSrcAddress."
    ::= { tmnxOamVxlanPingResultsEntry 1 }

tmnxOamVxlanPingResOutSrcAddress OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVxlanPingResOutSrcAddress indicates the outer
         source IP address (as selected by SROS) used for the specified
         'vxlanPing' test run.  The value was copied into the Outer Source IPv4
         Address field of the VXLAN Header of each OAM echo request launched for
         the specified test run.

         IPv6 may be supported in a future release."
    REFERENCE
        "RFC 7348, 'VXLAN: A Framework for Overlaying Virtualized Layer 2
         Networks over Layer 3 Networks', August 2014, Section 5, 'VXLAN Frame
         Format'."
    ::= { tmnxOamVxlanPingResultsEntry 2 }

tmnxOamPingReadOnlyScalars       OBJECT IDENTIFIER ::= { tmnxOamPingObjs 30 }

tmnxOamBfdOnLspSessBootstrInProg OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspSessBootstrInProg indicates the current
         number of BFD-on-LSP sessions with OAM operational state (i.e.
         tmnxOamBfdOnLspOperState) 'bootstrapInProg(1)'."
    ::= { tmnxOamPingReadOnlyScalars 1 }

tmnxOamBfdOnLspSessBootstrNoPV   OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspSessBootstrNoPV indicates the current
         number of BFD-on-LSP sessions with OAM operational state (i.e.
         tmnxOamBfdOnLspOperState) 'bootstrappedNoPeriodicVerif(2)'."
    ::= { tmnxOamPingReadOnlyScalars 2 }

tmnxOamBfdOnLspSessBootstrSendPV OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBfdOnLspSessBootstrSendPV indicates the current
         number of BFD-on-LSP sessions with OAM operational state (i.e.
         tmnxOamBfdOnLspOperState) 'bootstrappedSendingPeriodicVerif(3)'."
    ::= { tmnxOamPingReadOnlyScalars 3 }

tmnxOamBierPingCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBierPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierPingCtlTable (along with tmnxOamPingCtlTable) contains the
         configuration information for BIER (Bit Index Explicit Replication)
         ping tests."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017.
         IETF 'BIER Ping and Trace draft-ietf-bier-ping-05', 24-Apr-2019."
    ::= { tmnxOamPingObjs 31 }

tmnxOamBierPingCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamBierPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierPingCtlEntry (along with tmnxOamPingCtlEntry) contains the
         configuration information for a BIER ping test.

         A row is created when the corresponding tmnxOamPingCtlTestMode is set
         to 'bierPing'.

         A row is destroyed when the corresponding tmnxOamPingCtlTable row is
         destroyed (using tmnxOamPingCtlRowStatus).

         The values in a particular row in this table cannot be changed when
         the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamBierPingCtlTable 1 }

TmnxOamBierPingCtlEntry          ::= SEQUENCE
{
    tmnxOamBierPingCtlSubDomain      Unsigned32,
    tmnxOamBierPingCtlBfrId          Unsigned32,
    tmnxOamBierPingCtlBfrIdStart     Unsigned32,
    tmnxOamBierPingCtlBfrIdEnd       Unsigned32,
    tmnxOamBierPingCtlTtl            Unsigned32
}

tmnxOamBierPingCtlSubDomain      OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingCtlSubDomain specifies the BIER sub-domain
         to be tested.

         Zero indicates the default sub-domain."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'.
         IETF 'BIER Ping and Trace draft-ietf-bier-ping-05', 24-Apr-2019,
         Section 4.3, 'Sending BIER Echo Request'."
    DEFVAL      { 0 }
    ::= { tmnxOamBierPingCtlEntry 1 }

tmnxOamBierPingCtlBfrId          OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4096)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingCtlBfrId specifies the identifier of the
         Bit-Forwarding Router (BFR) to be pinged.

         The BFR-ID must be a member of the tested sub-domain (as configured
         using tmnxOamBierPingCtlSubDomain).  Otherwise, the test will fail.

         Zero indicates no BFR-ID has been configured.

         There are three methods to configure the destination(s) to be pinged:
         1.  tmnxOamBierPingCtlBfrId.
         2.  tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd.
         3.  tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress.

         Exactly one of the methods must be used.  Otherwise, the test will
         fail."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'."
    DEFVAL      { 0 }
    ::= { tmnxOamBierPingCtlEntry 2 }

tmnxOamBierPingCtlBfrIdStart     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4096)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingCtlBfrIdStart specifies the start of a
         contiguous range of Bit-Forwarding Router (BFR) identifiers to be
         pinged.  tmnxOamBierPingCtlBfrIdEnd specifies the end of the range.

         Each BFR-ID in the range must be a member of the tested sub-domain
         (as configured using tmnxOamBierPingCtlSubDomain).  Otherwise, the
         test will fail.

         Zero indicates no start for the BFR-ID range has been configured.

         The following objects must be set together in one SNMP Set PDU:
             tmnxOamBierPingCtlBfrIdStart,
             tmnxOamBierPingCtlBfrIdEnd.

         There are three methods to configure the destination(s) to be pinged:
         1.  tmnxOamBierPingCtlBfrId.
         2.  tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd.
         3.  tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress.

         Exactly one of the methods must be used.  Otherwise, the test will
         fail."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'."
    DEFVAL      { 0 }
    ::= { tmnxOamBierPingCtlEntry 3 }

tmnxOamBierPingCtlBfrIdEnd       OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4096)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingCtlBfrIdEnd specifies the end of a
         contiguous range of Bit-Forwarding Router (BFR) identifiers to be
         pinged.  tmnxOamBierPingCtlBfrIdStart specifies the start of the range.

         Each BFR-ID in the range must be a member of the tested sub-domain
         (as configured using tmnxOamBierPingCtlSubDomain).  Otherwise, the
         test will fail.

         Zero indicates no end for the BFR-ID range has been configured.

         The following objects must be set together in one SNMP Set PDU:
             tmnxOamBierPingCtlBfrIdStart,
             tmnxOamBierPingCtlBfrIdEnd.

         There are three methods to configure the destination(s) to be pinged:
         1.  tmnxOamBierPingCtlBfrId.
         2.  tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd.
         3.  tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress.

         Exactly one of the methods must be used.  Otherwise, the test will
         fail."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'."
    DEFVAL      { 0 }
    ::= { tmnxOamBierPingCtlEntry 4 }

tmnxOamBierPingCtlTtl            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingCtlTtl specifies the MPLS Time To Live
         (TTL) to be used for the test."
    DEFVAL      { 255 }
    ::= { tmnxOamBierPingCtlEntry 5 }

tmnxOamBierPingBfrPfxCtlTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBierPingBfrPfxCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierPingBfrPfxCtlTable contains IP destination addresses (i.e.
         Bit-Forwarding Router (BFR) prefixes) for BIER ping tests."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 2, 'The BFR Identifier and BFR-Prefix'."
    ::= { tmnxOamPingObjs 32 }

tmnxOamBierPingBfrPfxCtlEntry    OBJECT-TYPE
    SYNTAX      TmnxOamBierPingBfrPfxCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierPingBfrPfxCtlEntry contains one BFR prefix.  A BIER ping
         test can have several BFR prefixes.  Each BFR prefix is an IP
         destination address for the test.

         A row is created/destroyed using tmnxOamBierPingBfrPfxCtlRowState.

         Rows in this table belonging to a particular test cannot be added,
         changed, or deleted when the test's tmnxOamPingCtlAdminStatus is
         'enabled(1)'."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamBierPingPfxIndex
    }
    ::= { tmnxOamBierPingBfrPfxCtlTable 1 }

TmnxOamBierPingBfrPfxCtlEntry    ::= SEQUENCE
{
    tmnxOamBierPingPfxIndex          Unsigned32,
    tmnxOamBierPingBfrPfxCtlRowState RowStatus,
    tmnxOamBierPingBfrPfxCtlAddrType InetAddressType,
    tmnxOamBierPingBfrPfxCtlAddress  InetAddress
}

tmnxOamBierPingPfxIndex          OBJECT-TYPE
    SYNTAX      Unsigned32 (1..16)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingPfxIndex specifies a BFR prefix index.  The
         index allows one test to have several BFR prefixes."
    ::= { tmnxOamBierPingBfrPfxCtlEntry 1 }

tmnxOamBierPingBfrPfxCtlRowState OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingBfrPfxCtlRowState specifies the status of
         the row for the specified BFR prefix."
    ::= { tmnxOamBierPingBfrPfxCtlEntry 2 }

tmnxOamBierPingBfrPfxCtlAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingBfrPfxCtlAddrType specifies the address
         type of tmnxOamBierPingBfrPfxCtlAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamBierPingBfrPfxCtlEntry 3 }

tmnxOamBierPingBfrPfxCtlAddress  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingBfrPfxCtlAddress specifies a BFR prefix
         used as a destination address for a BIER ping test.

         There are three methods to configure the destination(s) to be pinged:
         1.  tmnxOamBierPingCtlBfrId.
         2.  tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd.
         3.  tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress.

         Exactly one of the methods must be used.  Otherwise, the test will
         fail."
    DEFVAL      { ''H }
    ::= { tmnxOamBierPingBfrPfxCtlEntry 4 }

tmnxOamBierPingHistoryTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBierPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierPingHistoryTable (along with tmnxOamPingHistoryTable)
         contains the per-probe results for Bit Index Explicit Replication
         (BIER) ping tests."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019.
         RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017."
    ::= { tmnxOamPingObjs 33 }

tmnxOamBierPingHistoryEntry      OBJECT-TYPE
    SYNTAX      TmnxOamBierPingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierPingHistoryEntry (along with tmnxOamPingHistoryEntry)
         contains the results for one BIER ping probe.

         A row is created/destroyed when the corresponding
         tmnxOamPingHistoryEntry is created/destroyed.

         The first two indices specify a 'bierPing' test.

         The third index specifies a test run (started using
         tmnxOamPingCtlAdminStatus).

         The fourth index specifies a Bit-Forwarding Router (BFR) with results
         to report.

         All the indices match the corresponding tmnxOamPingHistoryEntry
         indices."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 4.6, 'Receiving Echo Reply'."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex,
        tmnxOamPingResultsTestRunIndex,
        tmnxOamPingHistoryIndex
    }
    ::= { tmnxOamBierPingHistoryTable 1 }

TmnxOamBierPingHistoryEntry      ::= SEQUENCE
{
    tmnxOamBierPingHistoryBfrId      Unsigned32,
    tmnxOamBierPingHistoryBfrPfxType InetAddressType,
    tmnxOamBierPingHistoryBfrPfx     InetAddress,
    tmnxOamBierPingHistoryReturnCode TmnxOamBierHistoryReturnCode
}

tmnxOamBierPingHistoryBfrId      OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4096)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingHistoryBfrId indicates the identifier of
         the Bit-Forwarding Router (BFR) targeted by the launched BIER Echo
         Request.

         Zero is returned if the BFR-ID cannot be determined."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'."
    ::= { tmnxOamBierPingHistoryEntry 1 }

tmnxOamBierPingHistoryBfrPfxType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingHistoryBfrPfxType indicates the IP address
         type of the address read using tmnxOamBierPingHistoryBfrPfx."
    ::= { tmnxOamBierPingHistoryEntry 2 }

tmnxOamBierPingHistoryBfrPfx     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingHistoryBfrPfx indicates the IP address of
         the Bit-Forwarding Router (BFR) targeted by the launched BIER Echo
         Request."
    ::= { tmnxOamBierPingHistoryEntry 3 }

tmnxOamBierPingHistoryReturnCode OBJECT-TYPE
    SYNTAX      TmnxOamBierHistoryReturnCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierPingHistoryReturnCode indicates the value
         copied from the Return Code field of the BIER Echo Reply PDU.

         Zero (i.e. 'No Return Code') is returned if a BIER Echo Reply PDU did
         not arrive (e.g. in the case of a timeout)."
    ::= { tmnxOamBierPingHistoryEntry 4 }

tmnxOamTraceRouteObjs            OBJECT IDENTIFIER ::= { tmnxOamTestObjs 2 }

tmnxOamTraceRouteNotifyObjects   OBJECT IDENTIFIER ::= { tmnxOamTraceRouteObjs 1 }

tmnxOamTrMaxConcurrentRequests   OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "requests"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum number of concurrent active trace route requests
         that are allowed within an agent implementation.  A value
         of 0 for this object implies that there is no limit for
         the number of concurrent active requests in effect."
    DEFVAL      { 0 }
    ::= { tmnxOamTraceRouteObjs 2 }

tmnxOamTrCtlTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamTrCtlTable contains configuration and status information for
         trace tests."
    ::= { tmnxOamTraceRouteObjs 3 }

tmnxOamTrCtlEntry                OBJECT-TYPE
    SYNTAX      TmnxOamTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamTrCtlEntry contains configuration and status information for
         one trace test.

         Rows are created/destroyed using tmnxOamTrCtlRowStatus.

         The test's test type (e.g. 'lspTraceRoute(2)') is configured using
         tmnxOamTrCtlTestMode.  Depending on the test type, configuration
         specific to the test type may reside in a child table (e.g.
         tmnxOamLspTrCtlTable).

         Test results reside in the tables listed in the tmnxOamTrCtlTestMode
         DESCRIPTION clause."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamTrCtlTable 1 }

TmnxOamTrCtlEntry                ::= SEQUENCE
{
    tmnxOamTrCtlOwnerIndex           SnmpAdminString,
    tmnxOamTrCtlTestIndex            SnmpAdminString,
    tmnxOamTrCtlRowStatus            RowStatus,
    tmnxOamTrCtlStorageType          StorageType,
    tmnxOamTrCtlDescr                SnmpAdminString,
    tmnxOamTrCtlTestMode             INTEGER,
    tmnxOamTrCtlAdminStatus          TmnxEnabledDisabledAdminState,
    tmnxOamTrCtlFcName               TFCName,
    tmnxOamTrCtlProfile              TProfile,
    tmnxOamTrCtlTargetIpAddress      IpAddress,
    tmnxOamTrCtlServiceId            TmnxServId,
    tmnxOamTrCtlDataSize             Unsigned32,
    tmnxOamTrCtlTimeOut              Unsigned32,
    tmnxOamTrCtlProbesPerHop         Unsigned32,
    tmnxOamTrCtlMaxTtl               Unsigned32,
    tmnxOamTrCtlInitialTtl           Unsigned32,
    tmnxOamTrCtlDSField              Unsigned32,
    tmnxOamTrCtlMaxFailures          Unsigned32,
    tmnxOamTrCtlInterval             Unsigned32,
    tmnxOamTrCtlMaxRows              Unsigned32,
    tmnxOamTrCtlTrapGeneration       BITS,
    tmnxOamTrCtlCreateHopsEntries    TruthValue,
    tmnxOamTrCtlSAA                  TruthValue,
    tmnxOamTrCtlRuns                 Counter32,
    tmnxOamTrCtlFailures             Counter32,
    tmnxOamTrCtlLastRunResult        TmnxOamTestResult,
    tmnxOamTrCtlLastChanged          TimeStamp,
    tmnxOamTrCtlVRtrID               TmnxVRtrIDOrZero,
    tmnxOamTrCtlTgtAddrType          InetAddressType,
    tmnxOamTrCtlTgtAddress           InetAddress,
    tmnxOamTrCtlSrcAddrType          InetAddressType,
    tmnxOamTrCtlSrcAddress           InetAddress,
    tmnxOamTrCtlWaitMilliSec         Unsigned32,
    tmnxOamTrCtlRouterInstanceName   TLNamedItemOrEmpty
}

tmnxOamTrCtlOwnerIndex           OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlOwnerIndex specifies the owner name of the
         test."
    ::= { tmnxOamTrCtlEntry 1 }

tmnxOamTrCtlTestIndex            OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlTestIndex specifies the test name of the
         test.

         The test is identified by the owner name and the test name.  One owner
         typically owns several tests.  This indexing method ensures tests
         created by several owners have unique indices."
    ::= { tmnxOamTrCtlEntry 2 }

tmnxOamTrCtlRowStatus            OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlRowStatus specifies the status of the row for
         the specified trace test.

         Deleting a row deletes all the child rows with the same owner name and
         test name, including additional configuration rows (e.g.
         tmnxOamLspTrCtlTable), and rows containing test results (e.g.
         tmnxOamTrHopsTable)."
    ::= { tmnxOamTrCtlEntry 3 }

tmnxOamTrCtlStorageType          OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 14.0 R1.  There is no
         replacement object."
    DEFVAL      { volatile }
    ::= { tmnxOamTrCtlEntry 4 }

tmnxOamTrCtlDescr                OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 14.0 R1.  There is no
         replacement object."
    DEFVAL      { '00'H }
    ::= { tmnxOamTrCtlEntry 5 }

tmnxOamTrCtlTestMode             OBJECT-TYPE
    SYNTAX      INTEGER {
        none            (0),
        macTraceRoute   (1),
        lspTraceRoute   (2),
        vprnTraceRoute  (3),
        mcastTraceRoute (4),
        icmpTraceRoute  (5),
        ldpTreeTrace    (6),
        vccvTraceRoute  (7),
        p2mpLspTrace    (8),
        ethCfmLinkTrace (9),
        bierTrace       (10)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlTestMode specifies the type of trace route
         test defined by this row.

         Code points:
         'bierTrace'
             - Bit Index Explicit Replication (BIER) trace route test.
         'ethCfmLinkTrace'
             - Ethernet Connectivity Fault Management (CFM) trace route test.
         'icmpTraceRoute'
             - traceroute test (receives Internet Control Message Protocol
               (ICMP) responses).
         'ldpTreeTrace'
             - Label Distribution Protocol (LDP) Tree Trace test.
         'lspTraceRoute'
             - Label Switched Path (LSP) trace route test.
         'macTraceRoute'
             - Ethernet Media Access Control (MAC) trace route test.
         'mcastTraceRoute'
             - mtrace test (i.e. IP multicast trace route test, using
               IETF draft-ietf-idmr-traceroute-ipm (IGMP-based)).
               OR
               Mtrace2 test (i.e. IP multicast trace route test, using
               IETF draft-ietf-mboned-mtrace-v2 (UDP-based)).
         'none'
             - no test type.
         'p2mpLspTrace'
             - Point-to-Multipoint Label Switched Path (LSP) trace route test.
         'vccvTraceRoute'
             - Virtual Circuit Connectivity Verification (VCCV) trace route
               test.
         'vprnTraceRoute'
             - Virtual Private Routed Network (VPRN) trace route test.

         When tmnxOamTrCtlTestMode is set, SROS may automatically create a
         same-INDEX row in a table used to configure objects specific to the
         test type (as shown in the following table).

         tmnxOamTrCtlTestMode   Auto-Gen Row for Additional Configuration
         --------------------   -----------------------------------------
         'bierTrace'            tmnxOamBierTrCtlTable
         'ethCfmLinkTrace'      tmnxOamEthCfmTrCtlTable
         'icmpTraceRoute'       tmnxOamIcmpTrCtlTable
         'ldpTreeTrace'         tmnxOamLTtraceCtlTable
         'lspTraceRoute'        tmnxOamLspTrCtlTable
         'macTraceRoute'        tmnxOamMacTrCtlTable
         'mcastTraceRoute'      tmnxOamMcastTrCtlTable
         'p2mpLspTrace'         tmnxOamP2mpLspTrCtlTable
         'vccvTraceRoute'       tmnxOamVccvTrCtlTable
         'vprnTraceRoute'       tmnxOamVprnTrCtlTable

         Baseline:  test results are available in tmnxOamTrResultsTable,
         tmnxOamTrHopsTable, and tmnxOamTrProbeHistoryTable.
         Exceptions are noted in the following two tables.

         tmnxOamTrCtlTestMode   Additional Results Table(s)
         --------------------   -------------------------------
         'bierTrace'            tmnxOamBierTrProbeHistoryTable
         'ethCfmLinkTrace'      tmnxOamEthCfmTrPrHistTable
         'icmpTraceRoute'       tmnxOamIcmpTrLabelStackTable
         'ldpTreeTrace'         tmnxOamLTtraceHopInfoTable
                                tmnxOamLTtraceResultsTable
         'lspTraceRoute'        tmnxOamLspTrDSLabelTable
                                tmnxOamLspTrFecStackTable
                                tmnxOamLspTrMapTable
         'macTraceRoute'        tmnxOamMacTrL2MapTable
         'mcastTraceRoute'      tmnxOamMcastTrRespTable
         'p2mpLspTrace'         tmnxOamP2mpLspTrDSLabelTable
                                tmnxOamP2mpLspTrMapTable
         'vccvTraceRoute'       tmnxOamVccvTrNextPwSegmentTable
         'vprnTraceRoute'       tmnxOamVprnTrL3MapTable
                                tmnxOamVprnTrNextHopTable
                                tmnxOamVprnTrRTTable

         tmnxOamTrCtlTestMode   Unused Standard Results Table
         --------------------   -----------------------------
         'ldpTreeTrace'         tmnxOamTrProbeHistoryTable
                                tmnxOamTrHopsTable
                                tmnxOamTrResultsTable
         'mcastTraceRoute'      tmnxOamTrHopsTable
         otherwise              none

         The support for Service Assurance Agent (SAA) tests (i.e. tests with
         tmnxOamSaaCtlTable rows) and OAM tests (i.e. tests without
         tmnxOamSaaCtlTable rows) varies with the test type, as shown in the
         following table.

         tmnxOamTrCtlTestMode   SAA Supported   OAM Supported
         --------------------   -------------   -------------
         'bierTrace'                       No             Yes
         'ethCfmLinkTrace'                Yes              No
         'icmpTraceRoute'                 Yes             Yes
         'ldpTreeTrace'                    No             Yes
         'lspTraceRoute'                  Yes             Yes
         'macTraceRoute'                  Yes             Yes
         'mcastTraceRoute'                 No             Yes
         'p2mpLspTrace'                    No             Yes
         'vccvTraceRoute'                 Yes             Yes
         'vprnTraceRoute'                 Yes             Yes "
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017.
         IETF 'BIER Ping and Trace draft-ietf-bier-ping-05', 24-Apr-2019."
    DEFVAL      { none }
    ::= { tmnxOamTrCtlEntry 6 }

tmnxOamTrCtlAdminStatus          OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabledAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlAdminStatus specifies the administrative
         state of the specified trace test.

         An attempt to set tmnxOamTrCtlAdminStatus to 'enabled' will fail if
         the objects required by the trace test have not been set.

         When this object has the value 'enabled' an attempt to modify any of
         the test's configurable objects will fail.

         Upon completion of a trace test, the agent resets the value of this
         object to 'disabled'."
    DEFVAL      { disabled }
    ::= { tmnxOamTrCtlEntry 7 }

tmnxOamTrCtlFcName               OBJECT-TYPE
    SYNTAX      TFCName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlFcName specifies the forwarding class to be
         used when launching the probe(s).  The forwarding class name must be
         present in the index column of TIMETRA-QOS-MIB::tFCNameTable.

         As shown in the following table
         1.  This object is applicable to a subset of the test types, and
         2.  The default forwarding class depends on the test type.

         tmnxOamTrCtlTestMode   Applicable?   Default
         --------------------   -----------   -------
         bierTrace              yes           'be'
         ethCfmLinkTrace        yes           'nc'
         ldpTreeTrace           yes           'be'
         lspTraceRoute          yes           'be'
         macTraceRoute          yes           'be'
         p2mpLspTrace           yes           'be'
         vccvTraceRoute         yes           'be'
         vprnTraceRoute         yes           'be'
         otherwise              no            N/A

         For 'ethCfmLinkTrace', the forwarding class depends on whether the
         request is configured to egress on a network port or an access port.
         In the network port case, the forwarding class is the forwarding class
         of the pseudowire.  In the access port case, the forwarding class is
         that of the SAP's egress encapsulation policy.

         For 'lspTraceRoute' this is the forwarding class of the LSP tunnel.

         For 'macTraceRoute' this is the forwarding class of the SDP
         encapsulation.

         For 'p2mpLspTrace' this is the forwarding class of the P2MP LSP tree.

         If forwarding classes are mapped by the applicable QoS policy, the
         probe(s) may be launched using a different forwarding class than the
         forwarding class specified by this object."
    DEFVAL      { "be" }
    ::= { tmnxOamTrCtlEntry 8 }

tmnxOamTrCtlProfile              OBJECT-TYPE
    SYNTAX      TProfile
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlProfile specifies the profile to be used
         with the forwarding class specified in tmnxOamTrCtlFcName.  This
         object is optional.

         As shown in the following table
         1.  This object is applicable to a subset of the test types, and
         2.  The default profile value depends on the test type.

         tmnxOamTrCtlTestMode   Applicable?   Default
         --------------------   -----------   -------
         bierTrace              yes           'out(2)'
         ethCfmLinkTrace        yes           'in(1)'
         ldpTreeTrace           yes           'out(2)'
         lspTraceRoute          yes           'out(2)'
         macTraceRoute          yes           'out(2)'
         p2mpLspTrace           yes           'out(2)'
         vccvTraceRoute         yes           'out(2)'
         vprnTraceRoute         yes           'out(2)'
         otherwise              no            N/A"
    DEFVAL      { out }
    ::= { tmnxOamTrCtlEntry 9 }

tmnxOamTrCtlTargetIpAddress      OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamTrCtlTgtAddrType and
         tmnxOamTrCtlTgtAddress."
    DEFVAL      { '00000000'H }
    ::= { tmnxOamTrCtlEntry 10 }

tmnxOamTrCtlServiceId            OBJECT-TYPE
    SYNTAX      TmnxServId (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlServiceId specifies the service ID of the
         service being tested.

         The applicability of tmnxOamTrCtlServiceId varies with the test type,
         as shown in the following table.

         tmnxOamTrCtlTestMode   Applicability    Related Virtual Router Object
         --------------------   -------------    -----------------------------
         'icmpTraceRoute'       optional         tmnxOamTrCtlVRtrID
         'macTraceRoute'        mandatory        none
         'mcastTraceRoute'      optional         tmnxOamMcastTrCtlVRtrID
         'vprnTraceRoute'       mandatory        none
         otherwise              not applicable   none

         When tmnxOamTrCtlServiceId is mandatory, a non-zero value must be
         provided.

         When tmnxOamTrCtlServiceId is optional, it is used to specify a VPRN
         service.  The test must use the VPRN service's virtual router.

         When a related virtual router object is shown, the interaction is
         described in the DESCRIPTION clause of the listed object.

         When tmnxOamTrCtlTestMode is 'icmpTraceRoute',
         tmnxOamTrCtlRouterInstanceName is the preferred object for specifying
         the service to be tested.

         Service IDs larger than 2147483647 are internal, so they are excluded
         from the range.

         The default value is the null service ID."
    DEFVAL      { 0 }
    ::= { tmnxOamTrCtlEntry 11 }

tmnxOamTrCtlDataSize             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..9786)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlDataSize specifies (directly or indirectly)
         the size of the trace PDU.

         The relevance of tmnxOamTrCtlDataSize varies with the test type, as
         shown in the following table.

         tmnxOamTrCtlTestMode  Relevant?
         --------------------  ---------
         'lspTraceRoute'             yes
         'macTraceRoute'             yes
         'p2mpLspTrace'              yes
         'vccvTraceRoute'            yes
         'vprnTraceRoute'            yes
         otherwise                    no

         If the request PDU required for the specified test is larger than the
         PDU size indicated by tmnxOamTrCtlDataSize, SROS sends the smallest
         valid PDU larger than the size indicated.  For example, if
         tmnxOamTrCtlDataSize is 1 when a 'vccvTraceRoute' test is started on a
         FEC 128 pseudowire, an 88 octet request PDU is sent.

         Trace route requests are sent unfragmented."
    DEFVAL      { 1 }
    ::= { tmnxOamTrCtlEntry 12 }

tmnxOamTrCtlTimeOut              OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlTimeOut specifies the timeout for an OAM
         trace probe.

         For 'ethCfmLinkTrace', this is the timeout for the whole test.

         The minimum, maximum, and default values of this object vary with the
         test type, as follows.

         tmnxOamTrCtlTestMode   Minimum   Maximum   Default
         --------------------   -------   -------   -------
         'icmpTraceRoute'           N/A       N/A       N/A
         'ethCfmLinkTrace'            1        10         5
         otherwise                    1        60         3

         If tmnxOamTrCtlTestMode is 'ethCfmLinkTrace', the value of
         tmnxOamTrCtlTimeOut must be less than or equal to the value of
         tmnxOamTrCtlInterval."
    DEFVAL      { 3 }
    ::= { tmnxOamTrCtlEntry 13 }

tmnxOamTrCtlProbesPerHop         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    UNITS       "probes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlProbesPerHop specifies the number of OAM
         trace probes to send per TTL.

         The object's configurability, range, and default vary with the test
         type, as shown in the following table.

         tmnxOamTrCtlTestMode  Configurable?  Min  Max  Default
         --------------------  -------------  ---  ---  -------
         'bierTrace'                    yes     1   10        1
         'ethCfmLinkTrace'               no   n/a  n/a        1
         'icmpTraceRoute'               yes     1   10        3
         'ldpTreeTrace'                  no   n/a  n/a        1
         'lspTraceRoute'                yes     1   10        1
         'macTraceRoute'                yes     1   10        1
         'mcastTraceRoute'               no   n/a  n/a        1
         'p2mpLspTrace'                 yes     1   10        1
         'vccvTraceRoute'               yes     1   10        1
         'vprnTraceRoute'               yes     1   10        1

         The only value supported for an 'icmpTraceRoute' SAA test (i.e. a
         test with a tmnxOamSaaCtlTable row):  3."
    DEFVAL      { 1 }
    ::= { tmnxOamTrCtlEntry 14 }

tmnxOamTrCtlMaxTtl               OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlMaxTtl specifies the maximum time-to-live
         value.

         The applicability and default vary with tmnxOamTrCtlTestMode, as shown
         in the following table.

         tmnxOamTrCtlTestMode   Applicable?   Default
         --------------------   -----------   -------
         'bierTrace'                    yes        30
         'ethCfmLinkTrace'              yes        64
         'icmpTraceRoute'               yes        30
         'ldpTreeTrace'                 yes        30
         'lspTraceRoute'                yes        30
         'macTraceRoute'                yes         4
         'mcastTraceRoute'               no       N/A
         'p2mpLspTrace'                 yes        30
         'vccvTraceRoute'               yes         8
         'vprnTraceRoute'               yes         4"
    DEFVAL      { 4 }
    ::= { tmnxOamTrCtlEntry 15 }

tmnxOamTrCtlInitialTtl           OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlInitialTtl specifies the initial TTL
         value for the test.  This enables bypassing the initial (often
         well known) portion of a path.

         The object's configurability, range, and default vary with the test
         type, as shown in the following table.

         tmnxOamTrCtlTestMode  Configurable?  Min  Max  Default
         --------------------  -------------  ---  ---  -------
         'bierTrace'                    yes     1  255        1
         'ethCfmLinkTrace'               no   n/a  n/a        1
         'icmpTraceRoute'               yes     1  255        1
         'ldpTreeTrace'                  no   n/a  n/a        1
         'lspTraceRoute'                yes     1  255        1
         'macTraceRoute'                yes     1  255        1
         'mcastTraceRoute'               no   n/a  n/a        1
         'p2mpLspTrace'                 yes     1  255        1
         'vccvTraceRoute'               yes     1  255        1
         'vprnTraceRoute'               yes     1  255        1

         The only value supported for an 'icmpTraceRoute' SAA test (i.e. a
         test with a tmnxOamSaaCtlTable row):  1.

         This object does not affect the test execution for 'vccvTraceRoute',
         but applications may use the value to filter results for that test
         type."
    DEFVAL      { 1 }
    ::= { tmnxOamTrCtlEntry 16 }

tmnxOamTrCtlDSField              OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlDSField specifies the value to load in the
         Type of Service (TOS) octet or the Traffic Class (TC) octet of the
         launched ICMP echo request(s).  The TOS octet is a field in the IPv4
         packet header.  The TC octet is a field in the IPv6 packet header.

         The value in the TOS or TC octet may influence the route, latency,
         and/or probability of loss for the echo request (and, by inference,
         for the associated data flow).

         This object is supported when tmnxOamTrCtlTestMode is
         'icmpTraceRoute'. Otherwise, it is ignored."
    REFERENCE
        "RFC  791, 'Internet Protocol', section 3.1.
         RFC 1812, 'Requirements for IP Version 4 Routers', section 5.3.2.
         RFC 2460, 'Internet Protocol, Version 6 (IPv6) Specification',
         section 7.
         RFC 2474, 'Definition of the Differentiated Services Field (DS Field)
         in the IPv4 and IPv6 Headers'."
    DEFVAL      { 0 }
    ::= { tmnxOamTrCtlEntry 17 }

tmnxOamTrCtlMaxFailures          OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "timeouts"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlMaxFailures specifies the maximum number of
         consecutive timeouts allowed before terminating a trace route test.

         As shown in the following table
         1.  This object is applicable to a subset of the test types, and
         2.  The range and default value depend on the test type.

         tmnxOamTrCtlTestMode  Applicable?   Lower Bound  Upper Bound   Default
         --------------------  -----------   -----------  -----------   -------
         'bierTrace'                   yes             5            5         5
         'icmpTraceRoute'              yes            90           90        90
         'lspTraceRoute'               yes             1          255         5
         'p2mpLspTrace'                yes             1           10         5
         'vccvTraceRoute'              yes             1          255         5
         otherwise                      no           N/A          N/A       N/A"
    DEFVAL      { 5 }
    ::= { tmnxOamTrCtlEntry 18 }

tmnxOamTrCtlInterval             OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlInterval specifies the number of seconds to
         wait before repeating an OAM trace test.

         The number of hops in a single OAM trace test
         is determined by the value of the corresponding
         tmnxOamTrCtlProbesPerHop object.  After a single test completes,
         the number of seconds as defined by the value of tmnxOamTrCtlInterval
         MUST elapse before the next Nokia SROS OAM Trace Route test is
         started.

         The applicability, range, and default value of this object vary with
         tmnxOamTrCtlTestMode, as shown in the following table.

           tmnxOamTrCtlTestMode   Min Max Default
           --------------------   --- --- -------
           'bierTrace'             not applicable
           'ethCfmLinkTrace'        1  10       5
           'icmpTraceRoute'        not applicable
           'vccvTraceRoute'         1 255       1
           otherwise                1  10       1"
    DEFVAL      { 1 }
    ::= { tmnxOamTrCtlEntry 19 }

tmnxOamTrCtlMaxRows              OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "rows"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.0R17."
    DEFVAL      { 300 }
    ::= { tmnxOamTrCtlEntry 20 }

tmnxOamTrCtlTrapGeneration       OBJECT-TYPE
    SYNTAX      BITS {
        pathChange     (0),
        testFailure    (1),
        testCompletion (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlTrapGeneration specifies when and if to
         generate a notification for this entry:
         pathChange(0)     - Generate a tmnxOamTrPathChange
             notification when the current path varies from a previously
             determined path.
         testFailure(1)    - Generate a tmnxOamTrTestFailed notification when
             the full path to a target can't be determined.
         testCompletion(2) - Generate a tmnxOamTrTestCompleted notification
             when the test is completed."
    DEFVAL      { {} }
    ::= { tmnxOamTrCtlEntry 21 }

tmnxOamTrCtlCreateHopsEntries    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.0."
    DEFVAL      { false }
    ::= { tmnxOamTrCtlEntry 22 }

tmnxOamTrCtlSAA                  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlSAA specifies if this test is an SAA test
         (Service Assurance Agent; 'true'), or an OAM test ('false').  If
         there is a tmnxOamSaaCtlTable row with the specified index values,
         'true' is returned.  Otherwise, 'false' is returned."
    DEFVAL      { false }
    ::= { tmnxOamTrCtlEntry 23 }

tmnxOamTrCtlRuns                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlRuns indicates the number of times this OAM
         trace test has started."
    ::= { tmnxOamTrCtlEntry 24 }

tmnxOamTrCtlFailures             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlFailures indicates the number of times this
         OAM trace route test has failed."
    ::= { tmnxOamTrCtlEntry 25 }

tmnxOamTrCtlLastRunResult        OBJECT-TYPE
    SYNTAX      TmnxOamTestResult
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlLastRunResult indicates the completion
         status the last time this test was executed.  If this OAM test is
         currently in progress, this object indicates the result of the
         previous test run, if any."
    ::= { tmnxOamTrCtlEntry 26 }

tmnxOamTrCtlLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlLastChanged indicates the time the value of a
         settable object in this row was last changed."
    ::= { tmnxOamTrCtlEntry 27 }

tmnxOamTrCtlVRtrID               OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlVRtrID specifies the virtual router to be
         used for the test.

         Zero indicates no virtual router is specified.

         A non-zero value must be the index of an active row in
         TIMETRA-VRTR-MIB::vRtrConfTable (i.e. tmnxOamTrCtlVRtrID must match a
         valid TIMETRA-VRTR-MIB::vRtrID value).

         This object is applicable if tmnxOamTrCtlTestMode is 'icmpTraceRoute'.

         The table below shows the supported combinations of system-configured
         virtual routers and test types.

                               Supported for  Supported for  Supported for
         tmnxOamTrCtlTestMode  Base ?         management ?   vpls-management ?
         --------------------  -------------  -------------  -----------------
         'icmpTraceRoute'      Yes            Yes            Yes

         When directing an 'icmpTraceRoute' test to use a virtual router, the
         preferred object is tmnxOamTrCtlRouterInstanceName."
    DEFVAL      { 1 }
    ::= { tmnxOamTrCtlEntry 28 }

tmnxOamTrCtlTgtAddrType          OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlTgtAddrType specifies the address type of
         tmnxOamTrCtlTgtAddress.

         The values which can be used as part of a successful test depend on
         tmnxOamTrCtlTestMode, as follows.

         Test Mode             tmnxOamTrCtlTgtAddrType Values Supported
         ----------------    ------------------------------------------
         'icmpTraceRoute'                 'ipv4(1)' 'ipv6(2)' 'dns(16)'
         'vprnTraceRoute'                 'ipv4(1)' 'ipv6(2)'
         otherwise           'unknown(0)' "
    DEFVAL      { unknown }
    ::= { tmnxOamTrCtlEntry 29 }

tmnxOamTrCtlTgtAddress           OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlTgtAddress specifies the destination host
         address to be used when performing an OAM trace route operation.  The
         corresponding address type is configured using
         tmnxOamTrCtlTgtAddrType."
    DEFVAL      { ''H }
    ::= { tmnxOamTrCtlEntry 30 }

tmnxOamTrCtlSrcAddrType          OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlSrcAddrType specifies the type of Internet
         address stored in tmnxOamTrCtlSrcAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamTrCtlEntry 31 }

tmnxOamTrCtlSrcAddress           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlSrcAddress specifies the IP host address to
         be used as the source when performing an OAM Trace Route operation.

         This object is valid only when the tmnxOamTrCtlTestMode has a value of
         'icmpTraceRoute', 'lspTraceRoute', or 'vccvTraceRoute'."
    DEFVAL      { ''H }
    ::= { tmnxOamTrCtlEntry 32 }

tmnxOamTrCtlWaitMilliSec         OBJECT-TYPE
    SYNTAX      Unsigned32 (10..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlWaitMilliSec specifies the time in
         milliseconds to wait for a response before sending the next probe.

         This object is valid only for 'icmpTraceRoute' tests."
    DEFVAL      { 5000 }
    ::= { tmnxOamTrCtlEntry 33 }

tmnxOamTrCtlRouterInstanceName   OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrCtlRouterInstanceName specifies the name of the
         service or router instance to be used by an 'icmpTraceRoute' test.

         The following values are supported:
         1.  '' (i.e. the empty string),
         2.  'Base',
         3.  'management',
         4.  'vpls-management',
         5.  A VPRN service name (i.e. a TIMETRA-SERV-MIB::svcName, with
             TIMETRA-SERV-MIB::svcType = 'vprn(4)').
         6.  A CPM virtual router name (i.e. a user-configured router name, with
             TIMETRA-VRTR-MIB::vRtrType = 'vr(3)').

         Names other than the names listed above are accepted, but will not
         lead to a successful test.

         The service or virtual router to be used by an 'icmpTraceRoute' test
         can be specified using tmnxOamTrCtlVRtrID, tmnxOamTrCtlServiceId,
         and/or tmnxOamTrCtlRouterInstanceName.

         The following two combinations of the three objects are supported:
         1.  tmnxOamTrCtlVRtrID = 0,
             tmnxOamTrCtlServiceId = 0,
             tmnxOamTrCtlRouterInstanceName != ''.
             This is the preferred approach.
         2.  One or both of tmnxOamTrCtlVRtrID and tmnxOamTrCtlServiceId has a
             non-zero value,
             tmnxOamTrCtlRouterInstanceName = ''.

         An attempt to change TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 away
         from 'classic(1)' is blocked if any tmnxOamTrCtlRouterInstanceName is
         empty for an 'icmpTraceRoute' test.

         When TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 is not 'classic(1)',
         each 'icmpTraceRoute' test must continue to have a non-empty
         tmnxOamTrCtlRouterInstanceName."
    DEFVAL      { ''H }
    ::= { tmnxOamTrCtlEntry 34 }

tmnxOamTrResultsTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamTrResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamTrResultsTable contains the run-level test results for OAM
         trace tests.

         TTL-level test results for trace tests reside in tmnxOamTrHopsTable.

         Probe-level test results for trace tests reside in
         tmnxOamTrProbeHistoryTable."
    ::= { tmnxOamTraceRouteObjs 4 }

tmnxOamTrResultsEntry            OBJECT-TYPE
    SYNTAX      TmnxOamTrResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamTrResultsEntry contains the run-level test results for one OAM
         trace test run.

         A row is created when a trace test is enabled (using
         tmnxOamTrCtlAdminStatus).

         A row is destroyed when:
         1.  The corresponding test configuration is destroyed (using
         tmnxOamTrCtlRowStatus), or
         2.  Results are cleared for the test (using
         TIMETRA-CLEAR-MIB::tmnxClearAction), or
         3.  A new run result is available, and the limit on the number of
         run results retained (3, currently) has been reached.  In that case,
         the oldest run result row is destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex
    }
    ::= { tmnxOamTrResultsTable 1 }

TmnxOamTrResultsEntry            ::= SEQUENCE
{
    tmnxOamTrResultsOperStatus       INTEGER,
    tmnxOamTrResultsCurHopCount      Gauge32,
    tmnxOamTrResultsCurProbeCount    Gauge32,
    tmnxOamTrResultsIpTgtAddr        IpAddress,
    tmnxOamTrResultsTestAttempts     Unsigned32,
    tmnxOamTrResultsTestSuccesses    Unsigned32,
    tmnxOamTrResultsLastGoodPath     DateAndTime,
    tmnxOamTrResultsTestRunIndex     Unsigned32,
    tmnxOamTrResultsTgtAddrType      InetAddressType,
    tmnxOamTrResultsTgtAddress       InetAddress,
    tmnxOamTrResultsTestRunResult    TmnxOamTestResult
}

tmnxOamTrResultsOperStatus       OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled  (1),
        disabled (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrResultsOperStatus indicates the operational
         state of the specified test run.  'enabled(1)' indicates the test is
         running."
    ::= { tmnxOamTrResultsEntry 1 }

tmnxOamTrResultsCurHopCount      OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "hops"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reflects the current TTL value (range from 0 to 255) for an Nokia SROS
         OAM Trace Route operation. Maximum TTL value is determined by
         tmnxOamTrCtlMaxTtl.

         Zero is returned only in the case of an aborted 'ethCfmLinkTrace'
         test."
    ::= { tmnxOamTrResultsEntry 2 }

tmnxOamTrResultsCurProbeCount    OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "probes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reflects the current probe count (1..10) for an Nokia SROS OAM Trace
         Route operation. The maximum probe count is determined by
         tmnxOamTrCtlProbesPerHop."
    ::= { tmnxOamTrResultsEntry 3 }

tmnxOamTrResultsIpTgtAddr        OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamTrResultsTgtAddrType and
         tmnxOamTrResultsTgtAddress."
    ::= { tmnxOamTrResultsEntry 4 }

tmnxOamTrResultsTestAttempts     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "tests"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 3.0"
    ::= { tmnxOamTrResultsEntry 5 }

tmnxOamTrResultsTestSuccesses    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "tests"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 3.0."
    ::= { tmnxOamTrResultsEntry 6 }

tmnxOamTrResultsLastGoodPath     OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrResultsLastGoodPath indicates the date and time
         when the last complete path was determined.

         1970-Jan-01 00:00:00.0 UTC is returned when a complete path was not
         determined."
    ::= { tmnxOamTrResultsEntry 7 }

tmnxOamTrResultsTestRunIndex     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrResultsTestRunIndex specifies the test run INDEX
         of the row.

         The first  run of a test is assigned run index 1.
         The second run of a test is assigned run index 2.  Etc."
    ::= { tmnxOamTrResultsEntry 8 }

tmnxOamTrResultsTgtAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrResultsTgtAddrType indicates the Internet
         address type stored in tmnxOamTrResultsTgtAddress."
    ::= { tmnxOamTrResultsEntry 9 }

tmnxOamTrResultsTgtAddress       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrResultsTgtAddress indicates the IP destination
         address of the test.

         If the configured destination address of the test has type 'dns(16)',
         this is the corresponding IPv4 or IPv6 address (if available).

         tmnxOamTrResultsTgtAddrType is 'unknown(0)' when an IP destination
         address for the test is unavailable."
    ::= { tmnxOamTrResultsEntry 10 }

tmnxOamTrResultsTestRunResult    OBJECT-TYPE
    SYNTAX      TmnxOamTestResult
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrResultsTestRunResult indicates the result of the
         specified test run."
    ::= { tmnxOamTrResultsEntry 11 }

tmnxOamTrProbeHistoryTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamTrProbeHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamTrProbeHistoryTable contains per-probe results for most trace route
         tests.  Exceptions are noted in the tmnxOamTrCtlTestMode DESCRIPTION
         clause."
    ::= { tmnxOamTraceRouteObjs 5 }

tmnxOamTrProbeHistoryEntry       OBJECT-TYPE
    SYNTAX      TmnxOamTrProbeHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A tmnxOamTrProbeHistoryEntry is created by the system when the result
         of a trace route probe launch is determined.

         Rows are destroyed when the corresponding tmnxOamTrHopsTable row is
         destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex
    }
    ::= { tmnxOamTrProbeHistoryTable 1 }

TmnxOamTrProbeHistoryEntry       ::= SEQUENCE
{
    tmnxOamTrProbeHistoryIndex       Unsigned32,
    tmnxOamTrProbeHistoryHopIndex    Unsigned32,
    tmnxOamTrProbeHistoryProbeIndex  Unsigned32,
    tmnxOamTrProbeHistoryIpAddr      IpAddress,
    tmnxOamTrProbeHistoryResponse    Unsigned32,
    tmnxOamTrProbeHistoryOneWayTime  Integer32,
    tmnxOamTrProbeHistoryStatus      TmnxOamResponseStatus,
    tmnxOamTrProbeHistoryLastRC      Integer32,
    tmnxOamTrProbeHistoryTime        DateAndTime,
    tmnxOamTrProbeHistoryResponsePlane TmnxOamTestResponsePlane,
    tmnxOamTrProbeHistoryAddressType TmnxOamAddressType,
    tmnxOamTrProbeHistorySapId       TmnxStrSapId,
    tmnxOamTrProbeHistoryVersion     Unsigned32,
    tmnxOamTrProbeHistoryRouterID    RouterID,
    tmnxOamTrProbeHistoryIfIndex     InterfaceIndexOrZero,
    tmnxOamTrProbeHistoryDataLen     Unsigned32,
    tmnxOamTrProbeHistorySize        Unsigned32,
    tmnxOamTrProbeHistoryInOneWayTime Integer32,
    tmnxOamTrProbeHistoryAddrType    InetAddressType,
    tmnxOamTrProbeHistoryAddress     InetAddress,
    tmnxOamTrProbeHistorySrcGlobalId TmnxMplsTpGlobalID,
    tmnxOamTrProbeHistorySrcNodeId   TmnxMplsTpNodeID,
    tmnxOamTrProbeHistorySdpBindId   TNamedItemOrEmpty,
    tmnxOamTrProbeHistoryRtrnSubcode Unsigned32,
    tmnxOamTrProbeHistoryNtwrkIfName TNamedItemOrEmpty
}

tmnxOamTrProbeHistoryIndex       OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryIndex specifies a probe belonging to
         an OAM Trace Route test run.

         The probes are numbered sequentially, starting at one.

         Two indexing methods for uniquely identifying a probe are provided:
         1.  tmnxOamTrCtlOwnerIndex,
             tmnxOamTrCtlTestIndex,
             tmnxOamTrResultsTestRunIndex,
             tmnxOamTrProbeHistoryIndex.
         2.  tmnxOamTrCtlOwnerIndex,
             tmnxOamTrCtlTestIndex,
             tmnxOamTrResultsTestRunIndex,
             tmnxOamTrProbeHistoryHopIndex,
             tmnxOamTrProbeHistoryProbeIndex."
    ::= { tmnxOamTrProbeHistoryEntry 1 }

tmnxOamTrProbeHistoryHopIndex    OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryHopIndex specifies the number of hops
         travelled by the outbound trace route request.  The initial value used
         for a particular test is configured using tmnxOamTrCtlInitialTtl."
    ::= { tmnxOamTrProbeHistoryEntry 2 }

tmnxOamTrProbeHistoryProbeIndex  OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryProbeIndex specifies a trace route
         reply, in the context of a hop.

         Two indexing methods for uniquely identifying a probe are provided:
         1.  tmnxOamTrCtlOwnerIndex,
             tmnxOamTrCtlTestIndex,
             tmnxOamTrResultsTestRunIndex,
             tmnxOamTrProbeHistoryIndex.
         2.  tmnxOamTrCtlOwnerIndex,
             tmnxOamTrCtlTestIndex,
             tmnxOamTrResultsTestRunIndex,
             tmnxOamTrProbeHistoryHopIndex,
             tmnxOamTrProbeHistoryProbeIndex.

         The number of probes per hop for a particular test is configured using
         tmnxOamTrCtlProbesPerHop."
    ::= { tmnxOamTrProbeHistoryEntry 3 }

tmnxOamTrProbeHistoryIpAddr      OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamTrProbeHistoryAddrType and
         tmnxOamTrProbeHistoryAddress."
    ::= { tmnxOamTrProbeHistoryEntry 4 }

tmnxOamTrProbeHistoryResponse    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryResponse indicates the round trip
         time for the specified probe.

         Zero is returned when the information is not available (e.g. the probe
         timed out)."
    ::= { tmnxOamTrProbeHistoryEntry 5 }

tmnxOamTrProbeHistoryOneWayTime  OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryOneWayTime indicates the outbound
         trip time for the specified probe.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrProbeHistoryEntry 6 }

tmnxOamTrProbeHistoryStatus      OBJECT-TYPE
    SYNTAX      TmnxOamResponseStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryStatus indicates the outcome of the
         probe.  Example values:  'responseReceived', 'requestTimedOut'."
    ::= { tmnxOamTrProbeHistoryEntry 7 }

tmnxOamTrProbeHistoryLastRC      OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryLastRC indicates the last
         test-type-specific reply code received.

         The relevance of tmnxOamTrProbeHistoryLastRC depends on
         tmnxOamTrCtlTestMode, as follows.

         tmnxOamTrCtlTestMode   Relevant?
         --------------------   ---------
         'bierTrace'                   no
         'ethCfmLinkTrace'             no
         'icmpTraceRoute'             yes
         'ldpTreeTrace'                no
         'lspTraceRoute'              yes
         'macTraceRoute'              yes
         'mcastTraceRoute'             no
         'p2mpLspTrace'               yes
         'vccvTraceRoute'             yes
         'vprnTraceRoute'              no

         For 'icmpTraceRoute',
         a) Zero indicates no reply code is available (e.g. in the timeout
            case).
         b) 1..65535 indicates the value is the ICMP|ICMPv6 Code and ICMP|ICMPv6
            Type copied from the reply packet header.
            tmnxOamTrProbeHistoryLastRC bits 0 to 7 (i.e. the least significant
            byte) contain the ICMP|ICMPv6 Type.
            Bits 8 to 15 contain the ICMP|ICMPv6 Code.
         c) 65536 indicates (for a test with tmnxOamIcmpTrCtlProtocol='tcp') the
            TCP port probed on the destination node is open.
         d) 65537 indicates (for a test with tmnxOamIcmpTrCtlProtocol='tcp') the
            TCP port probed on the destination node is closed."
    ::= { tmnxOamTrProbeHistoryEntry 8 }

tmnxOamTrProbeHistoryTime        OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryTime indicates the date and time
         when the outcome of the specified probe was determined."
    ::= { tmnxOamTrProbeHistoryEntry 9 }

tmnxOamTrProbeHistoryResponsePlane OBJECT-TYPE
    SYNTAX      TmnxOamTestResponsePlane
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryResponsePlane indicates the type of
         response plane this trace route response was received on."
    ::= { tmnxOamTrProbeHistoryEntry 10 }

tmnxOamTrProbeHistoryAddressType OBJECT-TYPE
    SYNTAX      TmnxOamAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryAddressType indicates the type of
         binding address information returned in response to a test.

         When the test has the tmnxOamTrCtlTestMode value 'ethCfmLinkTrace',
         'unknown' is returned.

         For 'macTraceRoute', three types of address are applicable - 'sapId',
         'localCpu', and 'sdpId'.  Address type of 'sdpId' is a special case
         used specifically to indicate that the probe was traversing a b-vpls
         node in a PBB network (but where destination MAC is not necessarily
         known to the b-vpls node)."
    ::= { tmnxOamTrProbeHistoryEntry 11 }

tmnxOamTrProbeHistorySapId       OBJECT-TYPE
    SYNTAX      TmnxStrSapId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistorySapId indicates the name of the
         access port of the SAP supporting the requested IP address returned in
         response to a 'vprnTraceRoute' probe.

         If the value of tmnxOamTrProbeHistoryAddressType is not 'sapId', this
         object is not relevant and MUST have a null string ''."
    ::= { tmnxOamTrProbeHistoryEntry 12 }

tmnxOamTrProbeHistoryVersion     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryVersion indicates the protocol
         version for this OAM trace reply."
    ::= { tmnxOamTrProbeHistoryEntry 14 }

tmnxOamTrProbeHistoryRouterID    OBJECT-TYPE
    SYNTAX      RouterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS release 13.0 R1."
    ::= { tmnxOamTrProbeHistoryEntry 15 }

tmnxOamTrProbeHistoryIfIndex     OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryIfIndex indicates for a
         'lspTraceRoute' or 'vccvTraceRoute' probe the ifIndex value of the
         interface that this probe was transmitted from.

         For other types of probes, this value is not significant and zero is
         returned."
    ::= { tmnxOamTrProbeHistoryEntry 16 }

tmnxOamTrProbeHistoryDataLen     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryDataLen indicates the length of the
         echo reply.

         A valid value is returned when the test has a tmnxOamTrCtlTestMode
         value of 'icmpTraceRoute', 'lspTraceRoute', 'p2mpLspTrace', or
         'vccvTraceRoute'.  Otherwise, this value is not significant and zero is
         returned."
    ::= { tmnxOamTrProbeHistoryEntry 17 }

tmnxOamTrProbeHistorySize        OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistorySize indicates the size in octets
         of the user payload in the probe request packet.  It does not
         include the service encapsulation.

         Zero is returned if no probe was transmitted."
    ::= { tmnxOamTrProbeHistoryEntry 18 }

tmnxOamTrProbeHistoryInOneWayTime OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryInOneWayTime indicates the inbound
         trip time for the specified probe.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrProbeHistoryEntry 19 }

tmnxOamTrProbeHistoryAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryAddrType indicates the address type
         of tmnxOamTrProbeHistoryAddress."
    ::= { tmnxOamTrProbeHistoryEntry 20 }

tmnxOamTrProbeHistoryAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryAddress indicates the IP address of
         the replying node for the specified trace request."
    ::= { tmnxOamTrProbeHistoryEntry 21 }

tmnxOamTrProbeHistorySrcGlobalId OBJECT-TYPE
    SYNTAX      TmnxMplsTpGlobalID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistorySrcGlobalId indicates the source
         MPLS-TP global identifier of the replying node.  The value is copied
         from the reply's RFC 6426 Source Identifier TLV.  If the TLV is absent,
         zero is returned.

         This value is relevant when tmnxOamTrCtlTestMode is 'lspTraceRoute' or
         'vccvTraceRoute'.  Otherwise, zero is returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.2.2, 'Source Identifier TLV'."
    ::= { tmnxOamTrProbeHistoryEntry 22 }

tmnxOamTrProbeHistorySrcNodeId   OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistorySrcNodeId indicates the source
         MPLS-TP node identifier of the replying node.  The value is copied from
         the reply's RFC 6426 Source Identifier TLV.  If the TLV is absent, zero
         is returned.

         This value is relevant when tmnxOamTrCtlTestMode is 'lspTraceRoute' or
         'vccvTraceRoute'.  Otherwise, zero is returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.2.2, 'Source Identifier TLV'."
    ::= { tmnxOamTrProbeHistoryEntry 23 }

tmnxOamTrProbeHistorySdpBindId   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistorySdpBindId indicates the SDP binding
         provided by the remote system.

         The value of tmnxOamTrProbeHistorySdpBindId is relevant when
         tmnxOamTrProbeHistoryAddressType is 'sdpBindId(9)'."
    ::= { tmnxOamTrProbeHistoryEntry 24 }

tmnxOamTrProbeHistoryRtrnSubcode OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryRtrnSubcode indicates the value
         present in an MPLS echo reply's RFC 4379 Return Subcode (RSC) field.

         A valid value is returned when the test has a tmnxOamTrCtlTestMode
         value of 'lspTraceRoute' or 'ldpTreeTrace'.  Otherwise, zero is
         returned."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.1, 'Return Codes'."
    ::= { tmnxOamTrProbeHistoryEntry 25 }

tmnxOamTrProbeHistoryNtwrkIfName OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrProbeHistoryNtwrkIfName indicates the network
         interface name provided by the replying node.

         Network interface names are configured using
         TIMETRA-VRTR-MIB::vRtrIfName.

         The value of this object is the empty string when the value of
         tmnxOamTrProbeHistoryAddressType is not 'networkInterface(11)'."
    ::= { tmnxOamTrProbeHistoryEntry 26 }

tmnxOamTrHopsTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamTrHopsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamTrHopsTable contains the TTL-level test results for OAM trace
         tests.

         Run-level test results for trace tests reside in
         tmnxOamTrResultsTable.

         Probe-level test results for trace tests reside in
         tmnxOamTrProbeHistoryTable."
    ::= { tmnxOamTraceRouteObjs 6 }

tmnxOamTrHopsEntry               OBJECT-TYPE
    SYNTAX      TmnxOamTrHopsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamTrHopsEntry contains the TTL-level test results for one TTL of
         one OAM trace test run.

         A row is created when a TTL is probed by a trace test run.

         Rows are destroyed when the corresponding tmnxOamTrResultsTable row is
         destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrHopsHopIndex
    }
    ::= { tmnxOamTrHopsTable 1 }

TmnxOamTrHopsEntry               ::= SEQUENCE
{
    tmnxOamTrHopsHopIndex            Unsigned32,
    tmnxOamTrHopsIpTgtAddress        IpAddress,
    tmnxOamTrHopsMinRtt              Unsigned32,
    tmnxOamTrHopsMaxRtt              Unsigned32,
    tmnxOamTrHopsAverageRtt          Unsigned32,
    tmnxOamTrHopsRttSumOfSquares     Unsigned32,
    tmnxOamTrHopsMinTt               Integer32,
    tmnxOamTrHopsMaxTt               Integer32,
    tmnxOamTrHopsAverageTt           Integer32,
    tmnxOamTrHopsTtSumOfSquares      Unsigned32,
    tmnxOamTrHopsSentProbes          Unsigned32,
    tmnxOamTrHopsProbeResponses      Unsigned32,
    tmnxOamTrHopsLastGoodProbe       DateAndTime,
    tmnxOamTrHopsMinInTt             Integer32,
    tmnxOamTrHopsMaxInTt             Integer32,
    tmnxOamTrHopsAverageInTt         Integer32,
    tmnxOamTrHopsInTtSumOfSqrs       Unsigned32,
    tmnxOamTrHopsOutJitter           Integer32,
    tmnxOamTrHopsInJitter            Integer32,
    tmnxOamTrHopsRtJitter            Integer32,
    tmnxOamTrHopsProbeTimeouts       Unsigned32,
    tmnxOamTrHopsProbeFailures       Unsigned32,
    tmnxOamTrHopsTgtAddrType         InetAddressType,
    tmnxOamTrHopsTgtAddress          InetAddress,
    tmnxOamTrHopsRttOFSumSquares     Counter32,
    tmnxOamTrHopsRttHCSumSquares     Counter64,
    tmnxOamTrHopsTtOFSumSquares      Counter32,
    tmnxOamTrHopsTtHCSumSquares      Counter64,
    tmnxOamTrHopsInTtOFSumSqrs       Counter32,
    tmnxOamTrHopsInTtHCSumSqrs       Counter64
}

tmnxOamTrHopsHopIndex            OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsHopIndex specifies the TTL of the trace test
         run results reported by this row."
    ::= { tmnxOamTrHopsEntry 1 }

tmnxOamTrHopsIpTgtAddress        OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamTrHopsTgtAddrType and
         tmnxOamTrHopsTgtAddrType."
    ::= { tmnxOamTrHopsEntry 2 }

tmnxOamTrHopsMinRtt              OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsMinRtt indicates the minimum round trip time
         for the specified TTL of the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 3 }

tmnxOamTrHopsMaxRtt              OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsMaxRtt indicates the maximum round trip time
         for the specified TTL of the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 4 }

tmnxOamTrHopsAverageRtt          OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsAverageRtt indicates the average round trip
         time for the specified TTL of the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 5 }

tmnxOamTrHopsRttSumOfSquares     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsRttSumOfSquares indicates the least
         significant 32 bits of tmnxOamTrHopsRttHCSumSquares."
    ::= { tmnxOamTrHopsEntry 6 }

tmnxOamTrHopsMinTt               OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsMinTt indicates the minimum outbound trip
         time for the specified TTL of the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 7 }

tmnxOamTrHopsMaxTt               OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsMaxTt indicates the maximum outbound trip
         time for the specified TTL of the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 8 }

tmnxOamTrHopsAverageTt           OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsAverageTt indicates the average outbound
         trip time for the specified TTL of the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 9 }

tmnxOamTrHopsTtSumOfSquares      OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsTtSumOfSquares indicates the least
         significant 32 bits of tmnxOamTrHopsTtHCSumSquares."
    ::= { tmnxOamTrHopsEntry 10 }

tmnxOamTrHopsSentProbes          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsSentProbes indicates the number of probes
         sent for the specified TTL of the specified test run."
    ::= { tmnxOamTrHopsEntry 11 }

tmnxOamTrHopsProbeResponses      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsProbeResponses indicates the number of
         responses received for the specified TTL of the specified test run."
    ::= { tmnxOamTrHopsEntry 12 }

tmnxOamTrHopsLastGoodProbe       OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsLastGoodProbe indicates the date and time
         when the most recent response was received for the specified TTL of
         the specified test run.

         1970-Jan-01 00:00:00.0 UTC is returned if a response has not been
         received."
    ::= { tmnxOamTrHopsEntry 13 }

tmnxOamTrHopsMinInTt             OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsMinInTt indicates the minimum inbound trip
         time for the specified TTL of the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 18 }

tmnxOamTrHopsMaxInTt             OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsMaxInTt indicates the maximum inbound trip
         time for the specified TTL of the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 19 }

tmnxOamTrHopsAverageInTt         OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsAverageInTt indicates the average inbound
         trip time for the specified TTL of the specified test run.

         The value is valid if the two nodes have proper clock synchronization.
         Otherwise, for example, a negative value can be returned.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 20 }

tmnxOamTrHopsInTtSumOfSqrs       OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsInTtSumOfSqrs indicates the least
         significant 32 bits of tmnxOamTrHopsInTtHCSumSqrs."
    ::= { tmnxOamTrHopsEntry 21 }

tmnxOamTrHopsOutJitter           OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsOutJitter indicates the amount of jitter in
         the outbound trip times for the specified TTL of the specified test
         run.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 22 }

tmnxOamTrHopsInJitter            OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsInJitter indicates the amount of jitter in
         the inbound trip times for the specified TTL of the specified test
         run.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 23 }

tmnxOamTrHopsRtJitter            OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsRtJitter indicates the amount of jitter in
         the round trip times for the specified TTL of the specified test run.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 24 }

tmnxOamTrHopsProbeTimeouts       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsProbeTimeouts indicates the number of probes
         that timed out for the specified TTL of the specified test run."
    ::= { tmnxOamTrHopsEntry 25 }

tmnxOamTrHopsProbeFailures       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsProbeFailures indicates the number of probes
         that failed to be transmitted plus the number of probes that timed
         out."
    ::= { tmnxOamTrHopsEntry 26 }

tmnxOamTrHopsTgtAddrType         OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsTgtAddrType indicates the address type of
         tmnxOamTrHopsTgtAddress."
    ::= { tmnxOamTrHopsEntry 27 }

tmnxOamTrHopsTgtAddress          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsTgtAddress indicates the IP address of the
         replying node for the specified TTL of the specified test run."
    ::= { tmnxOamTrHopsEntry 28 }

tmnxOamTrHopsRttOFSumSquares     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsRttOFSumSquares indicates the number of
         times tmnxOamTrHopsRttSumOfSquares overflowed."
    ::= { tmnxOamTrHopsEntry 29 }

tmnxOamTrHopsRttHCSumSquares     OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsRttHCSumSquares indicates the sum of squares
         of the round trip times for the specified TTL of the specified test
         run.  Its purpose is to enable the standard deviation calculation.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 30 }

tmnxOamTrHopsTtOFSumSquares      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsTtOFSumSquares indicates the number of times
         tmnxOamTrHopsTtSumOfSquares overflowed."
    ::= { tmnxOamTrHopsEntry 31 }

tmnxOamTrHopsTtHCSumSquares      OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsTtHCSumSquares indicates the sum of squares
         of the outbound trip times for the specified TTL of the specified test
         run.  Its purpose is to enable the standard deviation calculation.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 32 }

tmnxOamTrHopsInTtOFSumSqrs       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsInTtOFSumSqrs indicates the number of times
         tmnxOamTrHopsInTtSumOfSqrs overflowed."
    ::= { tmnxOamTrHopsEntry 33 }

tmnxOamTrHopsInTtHCSumSqrs       OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "microseconds squared"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTrHopsInTtHCSumSqrs indicates the sum of squares
         of the inbound trip times for the specified TTL of the specified test
         run.  Its purpose is to enable the standard deviation calculation.

         Zero is returned when the information is not available."
    ::= { tmnxOamTrHopsEntry 34 }

tmnxOamMacTrCtlTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMacTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMacTrCtlTable contains configuration information for
         'macTraceRoute' tests."
    ::= { tmnxOamTraceRouteObjs 7 }

tmnxOamMacTrCtlEntry             OBJECT-TYPE
    SYNTAX      TmnxOamMacTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMacTrCtlEntry contains configuration information for one
         'macTraceRoute' test.

         SROS creates a row when tmnxOamTrCtlTestMode is set to
         'macTraceRoute'.

         SROS destroys a row when the corresponding tmnxOamTrCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamMacTrCtlTable 1 }

TmnxOamMacTrCtlEntry             ::= SEQUENCE
{
    tmnxOamMacTrCtlTargetMacAddr     MacAddress,
    tmnxOamMacTrCtlSourceMacAddr     MacAddress,
    tmnxOamMacTrCtlSendControl       TruthValue,
    tmnxOamMacTrCtlReplyControl      TruthValue
}

tmnxOamMacTrCtlTargetMacAddr     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrCtlTargetMacAddr is a 6-octet value that
         specifies the target MAC address to be used in the query request for
         performing an OAM Mac Trace Route operation when tmnxOamTrCtlTestMode
         has a value of 'macTraceRoute'."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.9"
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamMacTrCtlEntry 1 }

tmnxOamMacTrCtlSourceMacAddr     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrCtlSourceMacAddr is a 6-octet value that
         specifies the MAC address to be used as the source in the query
         request for performing an OAM MAC Trace Route operation when
         tmnxOamTrCtlTestMode has a value of 'macTraceRoute'."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.9"
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamMacTrCtlEntry 2 }

tmnxOamMacTrCtlSendControl       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrCtlSendControl specifies whether the outbound
         MAC trace route packet will use the data plane or the control plane.

         When the value is 'false', the packet is sent using the data plane.

         As of SROS release 13.0 R1, a test cannot be started if
         tmnxOamMacTrCtlSendControl is 'true'.  A test is started using
         tmnxOamTrCtlAdminStatus.

         This object will be marked obsolete in a future release."
    DEFVAL      { false }
    ::= { tmnxOamMacTrCtlEntry 3 }

tmnxOamMacTrCtlReplyControl      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamMacTrCtlReplyControl is 'true', the OAM Mac
         Trace Route response is returned using the control plane. If its value
         is 'false', the packet is sent via the data plane."
    DEFVAL      { false }
    ::= { tmnxOamMacTrCtlEntry 4 }

tmnxOamMacTrL2MapTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMacTrL2MapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'macTraceRoute'
         probe operation when a L2 Mapping TLV was returned.  Each row
         represents a single L2FEC TLV within the L2 Mapping TLV. A single
         L2 mapping entry is returned if the 'macTraceRoute' replier knows
         the requested VPN ID and has a binding for the requested MAC
         address.  Multiple downstream L2 mappings that specify
         the replier's flooding domain may be returned if the replier has
         no bindings for the MAC address.

         An entry in this table is created when the result of an OAM
         'macTraceRoute' probe is determined.

         Entries are removed from this table when the corresponding
         tmnxOamTrProbeHistoryEntry is deleted."
    ::= { tmnxOamTraceRouteObjs 8 }

tmnxOamMacTrL2MapEntry           OBJECT-TYPE
    SYNTAX      TmnxOamMacTrL2MapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamMacTrL2MapTable.  The first two
         index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamMacTrL2MapEntry belongs to.  The third index element
         identifies a particular OAM trace route test run.  The fourth
         index element selects the group of responses associated with a
         specific probe attempt.  The fifth and sixth indexes select the
         hop and the probe at that hop for a particular Nokia SROS
         OAM Trace Route operation.  Note that in the case of a successful
         'macTraceRoute' reply there will be only one row entry created.
         However there may also be one or more error replies.  The seventh
         index selects a single L2 mapping entry within a specific
         probe reply."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamMacTrL2MapIndex
    }
    ::= { tmnxOamMacTrL2MapTable 1 }

TmnxOamMacTrL2MapEntry           ::= SEQUENCE
{
    tmnxOamMacTrL2MapIndex           Unsigned32,
    tmnxOamMacTrL2MapRouterID        IpAddress,
    tmnxOamMacTrL2MapLabel           MplsLabel,
    tmnxOamMacTrL2MapProtocol        TmnxOamSignalProtocol,
    tmnxOamMacTrL2MapVCType          TmnxOamVcType,
    tmnxOamMacTrL2MapVCID            TmnxVcId,
    tmnxOamMacTrL2MapDirection       INTEGER,
    tmnxOamMacTrL2MapSdpId           SdpId,
    tmnxOamMacTrL2MapSapName         TNamedItemOrEmpty
}

tmnxOamMacTrL2MapIndex           OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamMacTrL2MapIndex selects a single L2 mapping entry within a
         specific 'macTraceRoute' probe reply.

         The agent starts assigning tmnxOamMacTrL2MapIndex values at 1."
    ::= { tmnxOamMacTrL2MapEntry 1 }

tmnxOamMacTrL2MapRouterID        OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapRouterID is the router ID for this L2
         mapping entry."
    ::= { tmnxOamMacTrL2MapEntry 2 }

tmnxOamMacTrL2MapLabel           OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapLabel is the label used by the router
         for the L2FEC or VC ID specified by this L2 mapping entry."
    ::= { tmnxOamMacTrL2MapEntry 3 }

tmnxOamMacTrL2MapProtocol        OBJECT-TYPE
    SYNTAX      TmnxOamSignalProtocol
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapProtocol is the signaling protocol used
         by the router for the L2FEC or VC ID specified by this L2 mapping
         entry."
    ::= { tmnxOamMacTrL2MapEntry 4 }

tmnxOamMacTrL2MapVCType          OBJECT-TYPE
    SYNTAX      TmnxOamVcType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapVCType indicates the class of VC ID
         given in tmnxOamMacTrL2MapVCID."
    ::= { tmnxOamMacTrL2MapEntry 5 }

tmnxOamMacTrL2MapVCID            OBJECT-TYPE
    SYNTAX      TmnxVcId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapVCID is the VC ID associated with the
         label used by the L2FEC specified by this L2 mapping entry."
    ::= { tmnxOamMacTrL2MapEntry 6 }

tmnxOamMacTrL2MapDirection       OBJECT-TYPE
    SYNTAX      INTEGER {
        upstream   (1),
        downstream (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapDirection indicates the direction that
         this L2 mapping entry is in relation to the node that returned the
         'macTraceRoute' reply."
    ::= { tmnxOamMacTrL2MapEntry 7 }

tmnxOamMacTrL2MapSdpId           OBJECT-TYPE
    SYNTAX      SdpId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapSdpId indicates the ID of the SDP
         supporting the L2 mapping entry that returned the reply.

         If this mapping is not a SDP, this object is not relevant and MUST
         return a value of '0'."
    ::= { tmnxOamMacTrL2MapEntry 8 }

tmnxOamMacTrL2MapSapName         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMacTrL2MapSapName indicates the SAP name when the
         downstream of the responder is a SAP.

         If the downstream responder is not a SAP, this object is not relevant
         and MUST return a zero length empty string."
    ::= { tmnxOamMacTrL2MapEntry 9 }

tmnxOamLspTrCtlTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLspTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row in tmnxOamLspTrCtlTable contains the LSP-specific
         configuration information needed to launch an LSP (Label Switched Path)
         trace route test.  The rest of the configuration information needed to
         launch the test resides in the corresponding row of tmnxOamTrCtlTable.

         Seven types of LSP trace route tests are supported.  An abbreviated
         name for each test type is defined in the following table (for use in a
         subsequent table).  The test type's tmnxOamLspTrCtlTestSubMode code
         point is shown as well.

         Test Sub Mode           Abbreviated Test Type Name(s)
         ---------------------   -------------------------------
         'unspecified     (1)'   LDP, RSVP
         'static          (2)'   TPST (Transport Profile Static)
         'bgpLabeledPrefix(3)'   BGP
         'srIsis          (4)'   ISIS
         'srOspf          (5)'   OSPF
         'srTe            (6)'   SRTE
         'srPolicy        (7)'   SRPL
         'srOspf3         (8)'   OSP3

         The following table has a row for each LSP trace route test type,
         showing the mandatory and optional objects applicable to the test
         type.

         Test
         Type   Mandatory Objects               Optional Objects
         ---- -------------------------------- ---------------------------------
         BGP  tmnxOamLspTrCtlLdpPrefixType     *tmnxOamLspTrCtlNhAddressType
              tmnxOamLspTrCtlLdpPrefix         *tmnxOamLspTrCtlNhAddress
              tmnxOamLspTrCtlLdpPrefixLen       tmnxOamLspTrCtlNhIntfName
              tmnxOamLspTrCtlTestSubMode       #tmnxOamLspTrCtlPathDestType
                                               #tmnxOamLspTrCtlPathDest

         ISIS tmnxOamLspTrCtlLdpPrefixType      tmnxOamLspTrCtlIgpInstance
              tmnxOamLspTrCtlLdpPrefix         *tmnxOamLspTrCtlNhAddressType
              tmnxOamLspTrCtlLdpPrefixLen      *tmnxOamLspTrCtlNhAddress
              tmnxOamLspTrCtlTestSubMode        tmnxOamLspTrCtlNhIntfName
                                               #tmnxOamLspTrCtlPathDestType
                                               #tmnxOamLspTrCtlPathDest

         LDP  tmnxOamLspTrCtlLdpPrefixType     *tmnxOamLspTrCtlNhAddressType
              tmnxOamLspTrCtlLdpPrefix         *tmnxOamLspTrCtlNhAddress
              tmnxOamLspTrCtlLdpPrefixLen       tmnxOamLspTrCtlNhIntfName
                                               #tmnxOamLspTrCtlPathDestType
                                               #tmnxOamLspTrCtlPathDest

         OSPF tmnxOamLspTrCtlLdpPrefixType      tmnxOamLspTrCtlIgpInstance
              tmnxOamLspTrCtlLdpPrefix         *tmnxOamLspTrCtlNhAddressType
              tmnxOamLspTrCtlLdpPrefixLen      *tmnxOamLspTrCtlNhAddress
              tmnxOamLspTrCtlTestSubMode        tmnxOamLspTrCtlNhIntfName
                                               #tmnxOamLspTrCtlPathDestType
                                               #tmnxOamLspTrCtlPathDest

         OSP3 tmnxOamLspTrCtlLdpPrefixType      tmnxOamLspTrCtlIgpInstance
              tmnxOamLspTrCtlLdpPrefix         *tmnxOamLspTrCtlNhAddressType
              tmnxOamLspTrCtlLdpPrefixLen      *tmnxOamLspTrCtlNhAddress
              tmnxOamLspTrCtlTestSubMode        tmnxOamLspTrCtlNhIntfName
                                               #tmnxOamLspTrCtlPathDestType
                                               #tmnxOamLspTrCtlPathDest

         RSVP tmnxOamLspTrCtlLspName            tmnxOamLspTrCtlPathName

         SRPL tmnxOamLspTrCtlSrPlcyColor        tmnxOamLspTrCtlSrPlcySegList
              tmnxOamLspTrCtlSrPlcyEndPtAddr
              tmnxOamLspTrCtlSrPlcyEndPtAddT
              tmnxOamLspTrCtlTestSubMode

         SRTE tmnxOamLspTrCtlLspName           *tmnxOamLspTrCtlNhAddressType
              tmnxOamLspTrCtlTestSubMode       *tmnxOamLspTrCtlNhAddress
                                                tmnxOamLspTrCtlNhIntfName
                                               #tmnxOamLspTrCtlPathDestType
                                               #tmnxOamLspTrCtlPathDest
                                                tmnxOamLspTrCtlPathName

         TPST tmnxOamLspTrCtlLspName            tmnxOamLspTrCtlAssocChannel
              tmnxOamLspTrCtlTestSubMode        tmnxOamLspTrCtlForce
                                                tmnxOamLspTrCtlMplsTpPathType

         ALL  none                              tmnxOamLspTrCtlDownstreamMapTlv
                                                tmnxOamTrCtlDataSize
                                                tmnxOamTrCtlFcName
                                                tmnxOamTrCtlInitialTtl
                                                tmnxOamTrCtlInterval
                                                tmnxOamTrCtlMaxFailures
                                                tmnxOamTrCtlMaxTtl
                                                tmnxOamTrCtlProbesPerHop
                                                tmnxOamTrCtlProfile
                                               *tmnxOamTrCtlSrcAddrType
                                               *tmnxOamTrCtlSrcAddress
                                                tmnxOamTrCtlTimeOut
         ---- -------------------------------- ---------------------------------

         In the table above,
         1.  The optional objects in the ALL row apply to all LSP trace route
             test types.
         2.  Asterisks (*) mark a set of optional objects which must all be
             specified, or must all be unspecified.
         3.  Octothorpes (#) mark a separate set of optional objects which must
             all be specified, or must all be unspecified.
         4.  There are four supported combinations of
             tmnxOamLspTrCtlNhAddressType, tmnxOamLspTrCtlNhAddress,
             tmnxOamLspTrCtlNhIntfName, tmnxOamLspTrCtlPathDestType, and
             tmnxOamLspTrCtlPathDest, as follows:
             a) all unspecified
             b) tmnxOamLspTrCtlPathDestType and tmnxOamLspTrCtlPathDest
             c) tmnxOamLspTrCtlPathDestType, tmnxOamLspTrCtlPathDest, and
                tmnxOamLspTrCtlNhIntfName
             d) tmnxOamLspTrCtlPathDestType, tmnxOamLspTrCtlPathDest,
                tmnxOamLspTrCtlNhAddressType, and tmnxOamLspTrCtlNhAddress

         When an object combination other than a combination listed above is
         specified, values will be rejected or ignored, or the test will fail."
    REFERENCE
        "IETF draft-ietf-mpls-spring-lsp-ping-00, 'Label Switched Path (LSP)
         Ping/Trace for Segment Routing Networks Using MPLS Dataplane'.
         RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing'.
         IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.1, 'Identification of an SR Policy'."
    ::= { tmnxOamTraceRouteObjs 9 }

tmnxOamLspTrCtlEntry             OBJECT-TYPE
    SYNTAX      TmnxOamLspTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The system creates a row in tmnxOamLspTrCtlTable when
         tmnxOamTrCtlTestMode is set to 'lspTraceRoute'.

         The system deletes a row in tmnxOamLspTrCtlTable when the
         corresponding row in tmnxOamTrCtlTable is deleted."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamLspTrCtlTable 1 }

TmnxOamLspTrCtlEntry             ::= SEQUENCE
{
    tmnxOamLspTrCtlVRtrID            TmnxVRtrID,
    tmnxOamLspTrCtlLspName           TLNamedItemOrEmpty,
    tmnxOamLspTrCtlPathName          TLNamedItemOrEmpty,
    tmnxOamLspTrCtlLdpIpPrefix       IpAddress,
    tmnxOamLspTrCtlLdpIpPrefixLen    IpAddressPrefixLength,
    tmnxOamLspTrCtlLdpPrefixType     InetAddressType,
    tmnxOamLspTrCtlLdpPrefix         InetAddress,
    tmnxOamLspTrCtlLdpPrefixLen      InetAddressPrefixLength,
    tmnxOamLspTrCtlPathDestType      InetAddressType,
    tmnxOamLspTrCtlPathDest          InetAddress,
    tmnxOamLspTrCtlNhIntfName        TNamedItemOrEmpty,
    tmnxOamLspTrCtlNhAddressType     InetAddressType,
    tmnxOamLspTrCtlNhAddress         InetAddress,
    tmnxOamLspTrCtlDownstreamMapTlv  TmnxOamMplsEchoDownMapTlvOrNone,
    tmnxOamLspTrCtlTestSubMode       TmnxOamLspTestSubMode,
    tmnxOamLspTrCtlMplsTpPathType    TmnxOamMplsTpPathType,
    tmnxOamLspTrCtlAssocChannel      TmnxOamLspAssocChannel,
    tmnxOamLspTrCtlForce             TruthValue,
    tmnxOamLspTrCtlIgpInstance       TmnxIgpInstance,
    tmnxOamLspTrCtlSrPlcyColor       Unsigned32,
    tmnxOamLspTrCtlSrPlcyEndPtAddT   InetAddressType,
    tmnxOamLspTrCtlSrPlcyEndPtAddr   InetAddress,
    tmnxOamLspTrCtlSrPlcySegList     Unsigned32
}

tmnxOamLspTrCtlVRtrID            OBJECT-TYPE
    SYNTAX      TmnxVRtrID
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "tmnxOamLspTrCtlVRtrID was marked obsolete in SROS Release 6.0R15 and
         replaced with tmnxOamTrCtlVRtrID in tmnxOamTrCtlTable."
    DEFVAL      { 1 }
    ::= { tmnxOamLspTrCtlEntry 1 }

tmnxOamLspTrCtlLspName           OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlLspName specifies the name of the LSP for
         this LSP trace route test.

         When the test is started, if this name is not empty, there must be a
         TIMETRA-MPLS-MIB::vRtrMplsLspTable row with:
         1.  tmnxOamLspTrCtlLspName equal to
             TIMETRA-MPLS-MIB::vRtrMplsLspName, AND
         2.  TIMETRA-VRTR-MIB::vRtrID equal to 1, AND
         3.  TIMETRA-MPLS-MIB::vRtrMplsLspType equal to 'dynamic(2)',
             'bypassOnly(4)', or 'mplsTp(7)'.
         Otherwise, the test will fail.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspTrCtlEntry 2 }

tmnxOamLspTrCtlPathName          OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlPathName specifies the name of the Path
         (LSP) for this LSP trace route test.

         When the test is started, if this name is not empty, there must be a
         matching name in the column MPLS-TE-MIB::mplsTunnelName.  Otherwise,
         the test will fail.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspTrCtlEntry 3 }

tmnxOamLspTrCtlLdpIpPrefix       OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "tmnxOamLspTrCtlLdpIpPrefix was marked obsolete in SROS Release 4.0 and
         replaced with InetAddress objects tmnxOamLspTrCtlLdpPrefixType and
         tmnxOamLspTrCtlLdpPrefix."
    DEFVAL      { '00000000'H }
    ::= { tmnxOamLspTrCtlEntry 4 }

tmnxOamLspTrCtlLdpIpPrefixLen    OBJECT-TYPE
    SYNTAX      IpAddressPrefixLength
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "tmnxOamLspTrCtlLdpIpPrefixLen was marked obsolete in SROS Release 4.0
         and replaced with InetAddress object tmnxOamLspTrCtlLdpPrefixLen."
    DEFVAL      { 32 }
    ::= { tmnxOamLspTrCtlEntry 5 }

tmnxOamLspTrCtlLdpPrefixType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlLdpPrefixType specifies the type of
         Internet address stored in tmnxOamLspTrCtlLdpPrefix.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspTrCtlEntry 6 }

tmnxOamLspTrCtlLdpPrefix         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlLdpPrefix, along with
         tmnxOamLspTrCtlLdpPrefixType and tmnxOamLspTrCtlLdpPrefixLen,
         specifies the destination prefix for this LSP trace route test.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspTrCtlEntry 7 }

tmnxOamLspTrCtlLdpPrefixLen      OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    UNITS       "bits"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlLdpPrefixLen specifies the Internet
         address prefix length of tmnxOamLspTrCtlLdpPrefix.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { 32 }
    ::= { tmnxOamLspTrCtlEntry 8 }

tmnxOamLspTrCtlPathDestType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlPathDestType specifies the type of
         Internet address stored in tmnxOamLspTrCtlPathDest.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspTrCtlEntry 9 }

tmnxOamLspTrCtlPathDest          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlPathDest specifies a unique path in a
         multipath setup for this OAM LSP trace route to traverse.  This
         address is used as part of a hash key to select the appropriate ECMP to
         the destination.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspTrCtlEntry 10 }

tmnxOamLspTrCtlNhIntfName        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlNhIntfName specifies the name of the next
         hop interface to be used when launching the LSP trace route test.

         When the test is started, if this name is not empty, there must be a
         TIMETRA-VRTR-MIB::vRtrIfTable row with:
         1.  tmnxOamLspTrCtlNhIntfName equal to TIMETRA-VRTR-MIB::vRtrIfName,
             AND
         2.  TIMETRA-VRTR-MIB::vRtrID equal to 1.
         Otherwise, the test will fail.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspTrCtlEntry 11 }

tmnxOamLspTrCtlNhAddressType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlNhAddressType specifies the type of
         Internet address stored in tmnxOamLspTrCtlNhAddress.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspTrCtlEntry 12 }

tmnxOamLspTrCtlNhAddress         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlNhAddress specifies the interface address
         to the next hop which will be used to launch the LSP trace route test.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { ''H }
    ::= { tmnxOamLspTrCtlEntry 13 }

tmnxOamLspTrCtlDownstreamMapTlv  OBJECT-TYPE
    SYNTAX      TmnxOamMplsEchoDownMapTlvOrNone
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlDownstreamMapTlv specifies the type of
         downstream mapping TLV to insert in the MPLS echo request PDU when
         launching the test.

         When an LSP trace route test is created, the value of this object
         defaults to the value of the global configuration object
         tmnxOamMplsEchoDownstreamMapTlv.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    ::= { tmnxOamLspTrCtlEntry 14 }

tmnxOamLspTrCtlTestSubMode       OBJECT-TYPE
    SYNTAX      TmnxOamLspTestSubMode
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlTestSubMode specifies the type of LSP
         trace route test to perform.

         When this object is 'unspecified(1)', the type of LSP trace route test
         to be performed is determined when the test is started, from the set
         of tmnxOamLspTrCtlTable objects configured with non-default values.

         If there is a mismatch between tmnxOamLspTrCtlTestSubMode and the
         type of the LSP to be tested, the test will fail.  For example, if
         tmnxOamLspTrCtlTestSubMode is 'static(2)', and
         tmnxOamLspTrCtlLspName refers to an LSP with
         TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to 'mplsTp(7)', the test
         will fail.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { unspecified }
    ::= { tmnxOamLspTrCtlEntry 15 }

tmnxOamLspTrCtlMplsTpPathType    OBJECT-TYPE
    SYNTAX      TmnxOamMplsTpPathType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlMplsTpPathType specifies the type of the
         MPLS-TP path to be tested.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { active }
    ::= { tmnxOamLspTrCtlEntry 16 }

tmnxOamLspTrCtlAssocChannel      OBJECT-TYPE
    SYNTAX      TmnxOamLspAssocChannel
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlAssocChannel specifies the launched echo
         request's usage of the Associated Channel (ACH) mechanism, when
         testing an MPLS-TP LSP.

         When tmnxOamLspTrCtlTestSubMode is 'static(2)', the default value for
         tmnxOamLspTrCtlAssocChannel is 'nonIp(2)'.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { notApplicable }
    ::= { tmnxOamLspTrCtlEntry 17 }

tmnxOamLspTrCtlForce             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlForce specifies whether or not to force
         the transmission of the 'lspTraceRoute' request PDU(s).

         If tmnxOamLspTrCtlForce is 'true(1)', the test will proceed and
         request PDU(s) will be sent regardless of the local operational status
         of the tested LSP path.

         If tmnxOamLspTrCtlForce is 'false(2)',  the test will fail
         immediately when the local operational status of the tested LSP path is
         down.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { false }
    ::= { tmnxOamLspTrCtlEntry 18 }

tmnxOamLspTrCtlIgpInstance       OBJECT-TYPE
    SYNTAX      TmnxIgpInstance
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlIgpInstance specifies the Interior Gateway
         Protocol (IGP) instance to be used for the test.

         The supported object combinations for LSP trace route tests are listed
         in the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamLspTrCtlEntry 19 }

tmnxOamLspTrCtlSrPlcyColor       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlSrPlcyColor specifies the Segment Routing
         (SR) policy color to be used for the test.  A color associates an
         SR policy with an intent (e.g. low latency).

         tmnxOamLspTrCtlSrPlcyColor, tmnxOamLspTrCtlSrPlcyEndPtAddT, and
         tmnxOamLspTrCtlSrPlcyEndPtAddr must identify a known SR policy.
         Otherwise, the test will fail.  The color of a static SR policy is
         defined using TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyColor.

         When configuring an SR policy LSP trace test, the following objects
         must all be set in one snmpset PDU:
            tmnxOamLspTrCtlTestSubMode = 'srPolicy(7)',
            tmnxOamLspTrCtlSrPlcyColor,
            tmnxOamLspTrCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)',
            tmnxOamLspTrCtlSrPlcyEndPtAddr.

         The supported object combinations for LSP trace tests are listed in
         the tmnxOamLspTrCtlTable DESCRIPTION clause."
    REFERENCE
        "IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.1, 'Identification of an SR Policy'."
    DEFVAL      { 0 }
    ::= { tmnxOamLspTrCtlEntry 20 }

tmnxOamLspTrCtlSrPlcyEndPtAddT   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlSrPlcyEndPtAddT specifies the type of IP
         address stored in tmnxOamLspTrCtlSrPlcyEndPtAddr.

         The supported object combinations for LSP trace tests are listed in
         the tmnxOamLspTrCtlTable DESCRIPTION clause."
    DEFVAL      { unknown }
    ::= { tmnxOamLspTrCtlEntry 21 }

tmnxOamLspTrCtlSrPlcyEndPtAddr   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlSrPlcyEndPtAddr specifies the Segment
         Routing (SR) policy endpoint address to be used for the test.

         tmnxOamLspTrCtlSrPlcyColor, tmnxOamLspTrCtlSrPlcyEndPtAddT, and
         tmnxOamLspTrCtlSrPlcyEndPtAddr must identify a known SR policy.
         Otherwise, the test will fail.  The endpoint of a static SR policy
         is defined using
             TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddrType
             TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddr.

         When configuring an SR policy LSP trace test, the following objects
         must all be set in one snmpset PDU:
            tmnxOamLspTrCtlTestSubMode = 'srPolicy(7)',
            tmnxOamLspTrCtlSrPlcyColor,
            tmnxOamLspTrCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)',
            tmnxOamLspTrCtlSrPlcyEndPtAddr.

         The supported object combinations for LSP trace tests are listed in
         the tmnxOamLspTrCtlTable DESCRIPTION clause."
    REFERENCE
        "IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.1, 'Identification of an SR Policy'."
    DEFVAL      { ''H }
    ::= { tmnxOamLspTrCtlEntry 22 }

tmnxOamLspTrCtlSrPlcySegList     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..32)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrCtlSrPlcySegList specifies the Segment
         Routing (SR) policy segment list to be used for the test.

         The supported object combinations for LSP trace tests are listed in
         the tmnxOamLspTrCtlTable DESCRIPTION clause."
    REFERENCE
        "IETF draft-ietf-spring-segment-routing-policy-03, 'Segment Routing
         Policy Architecture', Section 2.2, 'Candidate Path and Segment List'."
    DEFVAL      { 0 }
    ::= { tmnxOamLspTrCtlEntry 23 }

tmnxOamLspTrMapTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLspTrMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLspTrMapTable contains the information obtained from RFC 4379
         Downstream Mapping TLVs and/or RFC 6424 Downstream Detailed Mapping
         TLVs within reply PDUs for active 'lspTraceRoute' tests."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamTraceRouteObjs 10 }

tmnxOamLspTrMapEntry             OBJECT-TYPE
    SYNTAX      TmnxOamLspTrMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLspTrMapEntry contains the information obtained from one RFC
         4379 Downstream Mapping TLV (or one RFC 6424 Downstream Detailed
         Mapping TLV) within one 'lspTraceRoute' reply PDU.

         The first six indices specify an 'lspTraceRoute' reply PDU.  The
         seventh index specifies one Downstream [Detailed] Mapping TLV within
         the PDU.

         Rows are created when a managed 'lspTraceRoute' reply PDU arrives
         containing one or more Downstream [Detailed] Mapping TLVs.

         Rows are destroyed when the parent tmnxOamTrProbeHistoryTable row is
         destroyed."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamLspTrMapIndex
    }
    ::= { tmnxOamLspTrMapTable 1 }

TmnxOamLspTrMapEntry             ::= SEQUENCE
{
    tmnxOamLspTrMapIndex             Unsigned32,
    tmnxOamLspTrMapDSIPv4Addr        IpAddress,
    tmnxOamLspTrMapAddrType          TmnxOamAddressType,
    tmnxOamLspTrMapDSIfAddr          Unsigned32,
    tmnxOamLspTrMapMTU               Unsigned32,
    tmnxOamLspTrMapDSIndex           Unsigned32,
    tmnxOamLspTrMapDsEgrIfNum        Unsigned32,
    tmnxOamLspTrMapDsIngIfNum        Unsigned32,
    tmnxOamLspTrMapDsIpAddressType   InetAddressType,
    tmnxOamLspTrMapDsIpAddress       InetAddress,
    tmnxOamLspTrMapDsIfAddressType   InetAddressType,
    tmnxOamLspTrMapDsIfAddress       InetAddress
}

tmnxOamLspTrMapIndex             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapIndex specifies one RFC 4379 Downstream
         Mapping TLV (or one RFC 6424 Downstream Detailed Mapping TLV) within
         the reply PDU specified by the other indices.

         The agent starts assigning tmnxOamLspTrMapIndex values at 1."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamLspTrMapEntry 1 }

tmnxOamLspTrMapDSIPv4Addr        OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 13.0 R1."
    ::= { tmnxOamLspTrMapEntry 2 }

tmnxOamLspTrMapAddrType          OBJECT-TYPE
    SYNTAX      TmnxOamAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapAddrType indicates the type of addressing
         used on the replying interface.  The value is copied from the Address
         Type field of the specified RFC 4379 Downstream Mapping TLV (or RFC
         6424 Downstream Detailed Mapping TLV), and then mapped from the RFC
         code point number to the SROS code point number.

         The supported SROS code points are listed in the following table.

         Code Point            Definition
         -------------------   ----------
         'ipv4Address   (1)'     RFC 4379
         'ipv4Unnumbered(7)'     RFC 4379
         'ipv6Address   (2)'     RFC 4379
         'ipv6Unnumbered(8)'     RFC 4379
         'nonIp        (10)'     RFC 6426

         The supported combinations of tmnxOamLspTrMapAddrType,
         tmnxOamLspTrMapDsEgrIfNum, tmnxOamLspTrMapDsIngIfNum,
         tmnxOamLspTrMapDsIpAddressType, and tmnxOamLspTrMapDsIfAddressType are
         listed in the following table.

         _AddrType          _EgrIfNum  _IngIfNum  _IpAddressType  _IfAddressType
         ----------------   ---------  ---------  --------------  --------------
         'ipv4Address'           zero       zero          'ipv4'          'ipv4'
         'ipv4Unnumbered'        zero   positive          'ipv4'       'unknown'
         'ipv6Address'           zero       zero          'ipv6'          'ipv6'
         'ipv6Unnumbered'        zero   positive          'ipv6'       'unknown'
         'nonIp'             positive   positive       'unknown'       'unknown'

         In the table above, zero is the null interface number."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 2.1, 'New Address Type for Downstream Mapping TLV'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamLspTrMapEntry 3 }

tmnxOamLspTrMapDSIfAddr          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 13.0 R1."
    ::= { tmnxOamLspTrMapEntry 4 }

tmnxOamLspTrMapMTU               OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapMTU indicates the largest MPLS frame
         (including the label stack) that fits on the interface to the
         downstream LSR (Label Switching Router).

         The value is copied from the MTU (Maximum Transmission Unit) field of
         the specified RFC 4379 Downstream Mapping TLV (or RFC 6424 Downstream
         Detailed Mapping TLV)."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamLspTrMapEntry 5 }

tmnxOamLspTrMapDSIndex           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 5.0."
    ::= { tmnxOamLspTrMapEntry 6 }

tmnxOamLspTrMapDsEgrIfNum        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapDsEgrIfNum indicates the egress interface
         number reported by the replying node.  This value is copied from the
         Downstream IP Address field of the specified RFC 4379 Downstream
         Mapping TLV (or the Downstream Address field of the specified RFC 6424
         Downstream Detailed Mapping TLV).  See the DESCRIPTION clause of
         tmnxOamLspTrMapAddrType for more information."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamLspTrMapEntry 7 }

tmnxOamLspTrMapDsIngIfNum        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapDsIngIfNum indicates the ingress interface
         number reported by the replying node.  This value is copied from the
         Downstream Interface Address field of the specified RFC 4379 Downstream
         Mapping TLV (or RFC 6424 Downstream Detailed Mapping TLV).  See the
         DESCRIPTION clause of tmnxOamLspTrMapAddrType for more information."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamLspTrMapEntry 8 }

tmnxOamLspTrMapDsIpAddressType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapDsIpAddressType indicates the type of
         address in tmnxOamLspTrMapDsIpAddress.  See the DESCRIPTION clause of
         tmnxOamLspTrMapAddrType for more information."
    ::= { tmnxOamLspTrMapEntry 9 }

tmnxOamLspTrMapDsIpAddress       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapDsIpAddress indicates the Downstream IP
         Address field in the specified RFC 4379 Downstream Mapping TLV (or the
         Downstream Address field in the specified RFC 6424 Downstream Detailed
         Mapping TLV)."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamLspTrMapEntry 10 }

tmnxOamLspTrMapDsIfAddressType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapDsIfAddressType indicates the type of
         address in tmnxOamLspTrMapDsIfAddress.  See the DESCRIPTION clause of
         tmnxOamLspTrMapAddrType for more information."
    ::= { tmnxOamLspTrMapEntry 11 }

tmnxOamLspTrMapDsIfAddress       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrMapDsIfAddress indicates the Downstream
         Interface Address field in the specified RFC 4379 Downstream Mapping
         TLV (or RFC 6424 Downstream Detailed Mapping TLV)."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.3, 'Downstream Mapping'.
         RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         Section 3.3, 'Downstream Detailed Mapping TLV'."
    ::= { tmnxOamLspTrMapEntry 12 }

tmnxOamVprnTrCtlTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVprnTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVprnTrCtlTable contains configuration information for
         'vprnTraceRoute' tests."
    ::= { tmnxOamTraceRouteObjs 11 }

tmnxOamVprnTrCtlEntry            OBJECT-TYPE
    SYNTAX      TmnxOamVprnTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVprnTrCtlEntry contains configuration information for one
         'vprnTraceRoute' test.

         SROS creates a row when tmnxOamTrCtlTestMode is set to
         'vprnTraceRoute'.

         SROS destroys a row when the corresponding tmnxOamTrCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamVprnTrCtlTable 1 }

TmnxOamVprnTrCtlEntry            ::= SEQUENCE
{
    tmnxOamVprnTrCtlSourceIpAddr     IpAddress,
    tmnxOamVprnTrCtlReplyControl     TruthValue,
    tmnxOamVprnTrCtlSrcAddrType      InetAddressType,
    tmnxOamVprnTrCtlSrcAddress       InetAddress
}

tmnxOamVprnTrCtlSourceIpAddr     OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamVprnTrCtlSrcAddrType and
         tmnxOamVprnTrCtlSrcAddress."
    DEFVAL      { '00000000'h }
    ::= { tmnxOamVprnTrCtlEntry 1 }

tmnxOamVprnTrCtlReplyControl     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamVprnTrCtlReplyControl is 'true', the OAM
         'vprnTraceRoute' response is returned using the control plane. If its
         value is 'false', the packet is sent via the data plane.

         This object is optional and is not relevant when tmnxOamTrCtlTestMode
         has a value other than 'vprnTraceRoute'."
    DEFVAL      { false }
    ::= { tmnxOamVprnTrCtlEntry 2 }

tmnxOamVprnTrCtlSrcAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrCtlSrcAddrType specifies the type of
         Internet address stored in tmnxOamVprnTrCtlSrcAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamVprnTrCtlEntry 3 }

tmnxOamVprnTrCtlSrcAddress       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrCtlSrcAddress specifies the Internet
         address to be used as the source for performing an OAM
         'vprnTraceRoute' operation when tmnxOamTrCtlTestMode has a value of
         'vprnTraceRoute'.  This parameter is required."
    DEFVAL      { ''H }
    ::= { tmnxOamVprnTrCtlEntry 4 }

tmnxOamVprnTrL3MapTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVprnTrL3MapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'vprnTraceRoute'
         probe operation.

         An entry in this table is created when the result of an OAM
         'vprnTraceRoute' probe is determined.

         Entries are removed from this table when the corresponding
         tmnxOamTrProbeHistoryEntry is deleted."
    ::= { tmnxOamTraceRouteObjs 12 }

tmnxOamVprnTrL3MapEntry          OBJECT-TYPE
    SYNTAX      TmnxOamVprnTrL3MapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamVprnTrL3MapTable.  The first
         two index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamVprnTrL3MapEntry belongs to.  The third index element
         identifies an OAM trace route test run.  The fourth index element
         selects a single Nokia SROS OAM 'vprnTraceRoute' operation
         result.  The fifth and sixth indexes select the hop and the
         probe at that hop for a particular Nokia SROS OAM
         'vprnTraceRoute' operation.  The seventh index selects either the
         requestor's or responder's L3 route information."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamVprnTrL3MapReporter
    }
    ::= { tmnxOamVprnTrL3MapTable 1 }

TmnxOamVprnTrL3MapEntry          ::= SEQUENCE
{
    tmnxOamVprnTrL3MapReporter       INTEGER,
    tmnxOamVprnTrL3MapRouterID       RouterID,
    tmnxOamVprnTrL3MapRteDestAddr    IpAddress,
    tmnxOamVprnTrL3MapRteDestMask    Unsigned32,
    tmnxOamVprnTrL3MapRteVprnLabel   MplsLabel,
    tmnxOamVprnTrL3MapRteMetrics     Unsigned32,
    tmnxOamVprnTrL3MapRteLastUp      DateAndTime,
    tmnxOamVprnTrL3MapRteOwner       INTEGER,
    tmnxOamVprnTrL3MapRtePref        Unsigned32,
    tmnxOamVprnTrL3MapRteDist        TmnxVPNRouteDistinguisher,
    tmnxOamVprnTrL3MapNumNextHops    Unsigned32,
    tmnxOamVprnTrL3MapNumRteTargets  Unsigned32,
    tmnxOamVprnTrL3MapDestAddrType   InetAddressType,
    tmnxOamVprnTrL3MapDestAddress    InetAddress,
    tmnxOamVprnTrL3MapDestMaskLen    InetAddressPrefixLength
}

tmnxOamVprnTrL3MapReporter       OBJECT-TYPE
    SYNTAX      INTEGER {
        requestor (1),
        responder (2)
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapReporter specifies who reported
         the route information in this row entry.  It may have come from
         the 'vprnTraceRoute' requestor's local information or it may be
         from the remote 'vprnTraceRoute' responder."
    ::= { tmnxOamVprnTrL3MapEntry 1 }

tmnxOamVprnTrL3MapRouterID       OBJECT-TYPE
    SYNTAX      RouterID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapRouterID indicates the router ID of the
         node, requestor or responder, that provided this route information."
    ::= { tmnxOamVprnTrL3MapEntry 2 }

tmnxOamVprnTrL3MapRteDestAddr    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamVprnTrL3MapDestAddrType and
         tmnxOamVprnTrL3MapDestAddrType."
    ::= { tmnxOamVprnTrL3MapEntry 3 }

tmnxOamVprnTrL3MapRteDestMask    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress object tmnxOamVprnTrL3MapDestMaskLen."
    ::= { tmnxOamVprnTrL3MapEntry 4 }

tmnxOamVprnTrL3MapRteVprnLabel   OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapRteVprnLabel indicates the VPRN label
         associated with the route information returned in this
         'vprnTraceRoute' reply."
    ::= { tmnxOamVprnTrL3MapEntry 5 }

tmnxOamVprnTrL3MapRteMetrics     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapRteMetrics indicates the metrics to be
         used with this 'vprnTraceRoute' route."
    ::= { tmnxOamVprnTrL3MapEntry 6 }

tmnxOamVprnTrL3MapRteLastUp      OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapRteLastUp indicates the time this route
         was last added or modified by the protocol."
    ::= { tmnxOamVprnTrL3MapEntry 7 }

tmnxOamVprnTrL3MapRteOwner       OBJECT-TYPE
    SYNTAX      INTEGER {
        invalid   (0),
        local     (1),
        static    (2),
        rip       (3),
        ospf      (4),
        isis      (5),
        bgp       (6),
        bgpVpn    (7),
        ldp       (8),
        aggregate (9),
        any       (10)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapRteOwner indicates the protocol
         that owns this route.  It may be a local or remote route."
    ::= { tmnxOamVprnTrL3MapEntry 8 }

tmnxOamVprnTrL3MapRtePref        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapRtePref indicates the route preference
         value for this route."
    ::= { tmnxOamVprnTrL3MapEntry 9 }

tmnxOamVprnTrL3MapRteDist        OBJECT-TYPE
    SYNTAX      TmnxVPNRouteDistinguisher
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapRteDist is the route distinguisher
         associated with the route information returned in this
         'vprnTraceRoute' reply."
    ::= { tmnxOamVprnTrL3MapEntry 10 }

tmnxOamVprnTrL3MapNumNextHops    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapNumNextHops indicates the number of
         entries in the tmnxOamVprnTrNextHopTable for this route."
    ::= { tmnxOamVprnTrL3MapEntry 11 }

tmnxOamVprnTrL3MapNumRteTargets  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapNumRteTargets indicates the number of
         entries in the tmnxOamVprnTrRTTable for this route."
    ::= { tmnxOamVprnTrL3MapEntry 12 }

tmnxOamVprnTrL3MapDestAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapDestAddrType indicates the type of
         internet address stored in tmnxOamVprnTrL3MapDestAddress."
    ::= { tmnxOamVprnTrL3MapEntry 13 }

tmnxOamVprnTrL3MapDestAddress    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapDestAddress indicates the Internet
         address to be advertised for the route information returned by this
         'vprnTraceRoute' reply.  When used together with
         tmnxOamVprnTrL3MapDestMaskLen and tmnxOamVprnTrL3MapRteVprnLabel,
         a customer route can be identified."
    ::= { tmnxOamVprnTrL3MapEntry 14 }

tmnxOamVprnTrL3MapDestMaskLen    OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    UNITS       "bits"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrL3MapDestMaskLen indicates the number of
         prefix bits (prefix width) to be &-ed with the IP address in
         tmnxOamVprnTrL3MapDestAddress."
    ::= { tmnxOamVprnTrL3MapEntry 15 }

tmnxOamVprnTrNextHopTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVprnTrNextHopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'vprnTraceRoute'
         probe operation where a L3 route next hop list is returned.

         An entry in this table is created when the result of an OAM
         'vprnTraceRoute' probe is determined.

         An entry is removed from this table when its corresponding
         tmnxOamVprnTrL3MapEntry is deleted."
    ::= { tmnxOamTraceRouteObjs 13 }

tmnxOamVprnTrNextHopEntry        OBJECT-TYPE
    SYNTAX      TmnxOamVprnTrNextHopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamVprnTrNextHopTable.  The first two
         index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamVprnTrNextHopEntry belongs to.  The third index element
         identifies an OAM trace route test run.  The fourth, fifth and sixth
         index elements select a single OAM 'vprnTraceRoute' reply.  The
         seventh index selects either the requestor's or responder's route
         information. The eighth index selects a single L3 next hop entry
         within a specific 'vprnTraceRoute' probe reply route information."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamVprnTrL3MapReporter,
        tmnxOamVprnTrNextHopIndex
    }
    ::= { tmnxOamVprnTrNextHopTable 1 }

TmnxOamVprnTrNextHopEntry        ::= SEQUENCE
{
    tmnxOamVprnTrNextHopIndex        Unsigned32,
    tmnxOamVprnTrNextHopRtrID        RouterID,
    tmnxOamVprnTrNextHopType         INTEGER,
    tmnxOamVprnTrNextHopTunnelID     TmnxTunnelID,
    tmnxOamVprnTrNextHopTunnelType   TmnxTunnelType,
    tmnxOamVprnTrNextHopIfIndex      InterfaceIndex,
    tmnxOamVprnTrNextHopAddrType     InetAddressType,
    tmnxOamVprnTrNextHopAddress      InetAddress
}

tmnxOamVprnTrNextHopIndex        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamVprnTrNextHopIndex selects a single L3 next hop entry
         associated with the router information returned within a specific
         'vprnTraceRoute' probe reply.

         The agent starts assigning tmnxOamVprnTrNextHopIndex values at 1."
    ::= { tmnxOamVprnTrNextHopEntry 1 }

tmnxOamVprnTrNextHopRtrID        OBJECT-TYPE
    SYNTAX      RouterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 6.0 and replaced with
         InetAddress objects tmnxOamVprnTrNextHopAddrType and
         tmnxOamVprnTrNextHopAddress."
    ::= { tmnxOamVprnTrNextHopEntry 2 }

tmnxOamVprnTrNextHopType         OBJECT-TYPE
    SYNTAX      INTEGER {
        local  (1),
        remote (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrNextHopType indicates whether the route
         owner is a local route or a remote, BGP-VPRN, route."
    ::= { tmnxOamVprnTrNextHopEntry 3 }

tmnxOamVprnTrNextHopTunnelID     OBJECT-TYPE
    SYNTAX      TmnxTunnelID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamVprnTrNextHopType is 'remote' the value of
         tmnxOamVprnTrNextHopTunnelID indicates the tunnel ID used to reach
         this BGP next hop."
    ::= { tmnxOamVprnTrNextHopEntry 4 }

tmnxOamVprnTrNextHopTunnelType   OBJECT-TYPE
    SYNTAX      TmnxTunnelType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamVprnTrNextHopType is 'remote' the value of
         tmnxOamVprnTrNextHopTunnelType indicates the type of tunnel used to
         reach this BGP next hop."
    ::= { tmnxOamVprnTrNextHopEntry 5 }

tmnxOamVprnTrNextHopIfIndex      OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamVprnTrNextHopType is 'local' the value of
         tmnxOamVprnTrNextHopIfIndex indicates the interface used to reach this
         ECMP next hop."
    ::= { tmnxOamVprnTrNextHopEntry 6 }

tmnxOamVprnTrNextHopAddrType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "tmnxOamVprnTrNextHopAddrType indicates the type of Internet address
         stored in tmnxOamVprnTrNextHopAddress.  Address types 'unknown(0)',
         'ipv4(1)', 'ipv6(2)', and 'ipv6z(4)' are supported."
    ::= { tmnxOamVprnTrNextHopEntry 7 }

tmnxOamVprnTrNextHopAddress      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrNextHopAddress is the Internet address for
         this L3 next hop entry."
    ::= { tmnxOamVprnTrNextHopEntry 8 }

tmnxOamVprnTrRTTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVprnTrRTEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'vprnTraceRoute'
         probe operation where a L3 route target list is returned.

         An entry in this table is created when the result of an OAM
         'vprnTraceRoute' probe is determined.

         An entry is removed from this table when its corresponding
         tmnxOamVprnTrL3MapEntry is deleted."
    ::= { tmnxOamTraceRouteObjs 14 }

tmnxOamVprnTrRTEntry             OBJECT-TYPE
    SYNTAX      TmnxOamVprnTrRTEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamVprnTrRTTable.  The first two
         index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamVprnTrRTEntry belongs to.  The third index element
         identifies an OAM trace route test run.  The fourth, fifth and sixth
         index elements select a single OAM 'vprnTraceRoute' reply.
         The seventh index selects either the probe requestor's or
         probe replier's route information.  The eighth index selects
         successive L3 route target entries contained in a specific
         'vprnTraceRoute' requestor or probe reply route information."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamVprnTrL3MapReporter,
        tmnxOamVprnTrRTIndex
    }
    ::= { tmnxOamVprnTrRTTable 1 }

TmnxOamVprnTrRTEntry             ::= SEQUENCE
{
    tmnxOamVprnTrRTIndex             Unsigned32,
    tmnxOamVprnTrRouteTarget         TmnxBgpRouteTarget
}

tmnxOamVprnTrRTIndex             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamVprnTrRTIndex selects a single L3 route target entry
         associated with the router information returned within a specific
         'vprnTraceRoute' probe reply.

         The agent starts assigning tmnxOamVprnTrRTIndex values at 1."
    ::= { tmnxOamVprnTrRTEntry 1 }

tmnxOamVprnTrRouteTarget         OBJECT-TYPE
    SYNTAX      TmnxBgpRouteTarget
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVprnTrRouteTarget is the route target ID for this
         L3 route target entry."
    ::= { tmnxOamVprnTrRTEntry 2 }

tmnxOamLspTrDSLabelTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLspTrDSLabelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'lspTraceRoute' probe
         operation when a Downstream Mapping TLV was returned.  Each row
         represents a single downstream label within a returned downstream L2
         mapping TLV.

         An entry in this table is created when the result of an OAM
         'lspTraceRoute' probe is determined.

         An entry is removed from this table when its corresponding
         tmnxOamLspTrMapEntry is deleted."
    ::= { tmnxOamTraceRouteObjs 15 }

tmnxOamLspTrDSLabelEntry         OBJECT-TYPE
    SYNTAX      TmnxOamLspTrDSLabelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamLspTrDSLabelTable.  The first
         two index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamLspTrMapEntry belongs to.  The third index element
         identifies a OAM trace route test run. The fourth index element
         selects the group of responses associated with a specific
         probe attempt. The fifth and sixth indexes select the hop and
         the probe at that hop for a particular Nokia SROS OAM
         Trace Route operation. The seventh index selects a single downstream
         L2 map entry within the specific probe reply.  The eighth index
         selects successive downstream L2 label entries contained in a
         specific probe reply."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamLspTrMapIndex,
        tmnxOamLspTrDSLabelIndex
    }
    ::= { tmnxOamLspTrDSLabelTable 1 }

TmnxOamLspTrDSLabelEntry         ::= SEQUENCE
{
    tmnxOamLspTrDSLabelIndex         Unsigned32,
    tmnxOamLspTrDSLabelLabel         MplsLabel,
    tmnxOamLspTrDSLabelProtocol      TmnxOamSignalProtocol
}

tmnxOamLspTrDSLabelIndex         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamLspTrDSLabelIndex selects a single downstream L2 label
         entry within a specific L2 mapping entry reply.

         The agent starts assigning tmnxOamLspTrDSLabelIndex values at 1."
    ::= { tmnxOamLspTrDSLabelEntry 1 }

tmnxOamLspTrDSLabelLabel         OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrDSLabelLabel is the label used by the
         downstream router specified by this downstream L2 label entry."
    ::= { tmnxOamLspTrDSLabelEntry 2 }

tmnxOamLspTrDSLabelProtocol      OBJECT-TYPE
    SYNTAX      TmnxOamSignalProtocol
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrDSLabelProtocol is the signaling protocol
         used by the router for the label specified by this downstream L2 label
         entry."
    ::= { tmnxOamLspTrDSLabelEntry 3 }

tmnxOamMcastTrCtlTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMcastTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMcastTrCtlTable contains configuration and status information
         specific to 'mcastTraceRoute' tests."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017."
    ::= { tmnxOamTraceRouteObjs 16 }

tmnxOamMcastTrCtlEntry           OBJECT-TYPE
    SYNTAX      TmnxOamMcastTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The system creates a row in tmnxOamMcastTrCtlTable when a test's type
         (i.e. tmnxOamTrCtlTestMode) is set to 'mcastTraceRoute'.

         The system destroys a row in tmnxOamMcastTrCtlTable when the
         corresponding row in tmnxOamTrCtlTable is destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamMcastTrCtlTable 1 }

TmnxOamMcastTrCtlEntry           ::= SEQUENCE
{
    tmnxOamMcastTrCtlVRtrID          TmnxVRtrID,
    tmnxOamMcastTrCtlSrcIpAddr       IpAddress,
    tmnxOamMcastTrCtlDestIpAddr      IpAddress,
    tmnxOamMcastTrCtlRespIpAddr      IpAddress,
    tmnxOamMcastTrCtlGrpIpAddr       IpAddress,
    tmnxOamMcastTrCtlHops            Unsigned32,
    tmnxOamMcastTrQueryId            Unsigned32,
    tmnxOamMcastTrCtlSrcAddrType     InetAddressType,
    tmnxOamMcastTrCtlSrcAddress      InetAddress,
    tmnxOamMcastTrCtlDestAddrType    InetAddressType,
    tmnxOamMcastTrCtlDestAddress     InetAddress,
    tmnxOamMcastTrCtlRespAddrType    InetAddressType,
    tmnxOamMcastTrCtlRespAddress     InetAddress,
    tmnxOamMcastTrCtlGrpAddrType     InetAddressType,
    tmnxOamMcastTrCtlGrpAddress      InetAddress,
    tmnxOamMcastTrCtlTestSubMode     INTEGER
}

tmnxOamMcastTrCtlVRtrID          OBJECT-TYPE
    SYNTAX      TmnxVRtrID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlVRtrID specifies the virtual router to be
         used for the test.  The value specified must be the index of an active
         row in TIMETRA-VRTR-MIB::vRtrConfTable (i.e. tmnxOamMcastTrCtlVRtrID
         must match a valid TIMETRA-VRTR-MIB::vRtrID value).  The only
         system-generated TIMETRA-VRTR-MIB::vRtrID value supported by
         tmnxOamMcastTrCtlVRtrID is 1 (i.e. the Base virtual router).

         tmnxOamTrCtlVRtrID (i.e. the equivalent object in the parent table) is
         irrelevant when the test type is 'mcastTraceRoute'.

         When directing an 'mcastTraceRoute' test to use a virtual router
         associated with a VPRN service, the virtual router can be specified
         using tmnxOamMcastTrCtlVRtrID (with the VPRN's virtual router number)
         or tmnxOamTrCtlServiceId (with the VPRN's service number).
         tmnxOamTrCtlServiceId is preferred, because service numbers are
         constant across an SROS reboot (while virtual routers may be
         renumbered).  If non-default values are specified for both
         tmnxOamMcastTrCtlVRtrID and tmnxOamTrCtlServiceId,
         tmnxOamTrCtlServiceId is used."
    DEFVAL      { 1 }
    ::= { tmnxOamMcastTrCtlEntry 1 }

tmnxOamMcastTrCtlSrcIpAddr       OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "tmnxOamMcastTrCtlSrcIpAddr was marked obsolete in SROS Release 4.0 and
         replaced with InetAddress objects tmnxOamMcastTrCtlSrcAddrType and
         tmnxOamMcastTrCtlSrcAddress."
    ::= { tmnxOamMcastTrCtlEntry 2 }

tmnxOamMcastTrCtlDestIpAddr      OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "tmnxOamMcastTrCtlDestIpAddr was marked obsolete in SROS Release 4.0
         and replaced with InetAddress objects tmnxOamMcastTrCtlDestAddrType
         and tmnxOamMcastTrCtlDestAddress."
    DEFVAL      { '00000000'h }
    ::= { tmnxOamMcastTrCtlEntry 3 }

tmnxOamMcastTrCtlRespIpAddr      OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "tmnxOamMcastTrCtlRespIpAddr was marked obsolete in SROS Release 4.0
         and replaced with InetAddress objects tmnxOamMcastTrCtlRespAddrType
         and tmnxOamMcastTrCtlRespAddress."
    ::= { tmnxOamMcastTrCtlEntry 4 }

tmnxOamMcastTrCtlGrpIpAddr       OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "tmnxOamMcastTrCtlGrpIpAddr was marked obsolete in SROS Release 4.0 and
         replaced with InetAddress objects tmnxOamMcastTrCtlGrpAddrType and
         tmnxOamMcastTrCtlGrpAddress."
    ::= { tmnxOamMcastTrCtlEntry 5 }

tmnxOamMcastTrCtlHops            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlHops specifies the maximum number of
         hops that will be traced along the path to the source. This object is
         optional."
    DEFVAL      { 32 }
    ::= { tmnxOamMcastTrCtlEntry 6 }

tmnxOamMcastTrQueryId            OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrQueryId indicates the 24 bit random number
         that uniquely identifies the multicast trace query. When the router
         receives the response back from the first hop router, it maps the
         response to the query by looking at the query id in the packet."
    ::= { tmnxOamMcastTrCtlEntry 7 }

tmnxOamMcastTrCtlSrcAddrType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlSrcAddrType specifies the type of IP
         address stored in tmnxOamMcastTrCtlSrcAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamMcastTrCtlEntry 8 }

tmnxOamMcastTrCtlSrcAddress      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlSrcAddress specifies the IP address to
         be used as the source address for the test.

         A non-empty address must be specified before the test is enabled."
    DEFVAL      { ''H }
    ::= { tmnxOamMcastTrCtlEntry 9 }

tmnxOamMcastTrCtlDestAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlDestAddrType specifies the type of IP
         address stored in tmnxOamMcastTrCtlDestAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamMcastTrCtlEntry 10 }

tmnxOamMcastTrCtlDestAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlDestAddress specifies the IP address to
         be used as the destination address for the test.  The multicast trace
         query is sent to this destination address.

         When the test is administratively enabled (using
         tmnxOamTrCtlAdminStatus), if tmnxOamMcastTrCtlDestAddrType is
         'unknown(0)', SROS assigns a value to tmnxOamMcastTrCtlDestAddrType
         and tmnxOamMcastTrCtlDestAddress."
    DEFVAL      { ''H }
    ::= { tmnxOamMcastTrCtlEntry 11 }

tmnxOamMcastTrCtlRespAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlRespAddrType indicates the type of IP
         address stored in tmnxOamMcastTrCtlRespAddress."
    ::= { tmnxOamMcastTrCtlEntry 12 }

tmnxOamMcastTrCtlRespAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlRespAddress indicates the response
         address for the test."
    ::= { tmnxOamMcastTrCtlEntry 13 }

tmnxOamMcastTrCtlGrpAddrType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlGrpAddrType specifies the type of IP
         address stored in tmnxOamMcastTrCtlGrpAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamMcastTrCtlEntry 14 }

tmnxOamMcastTrCtlGrpAddress      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlGrpAddress specifies the IP multicast
         group address for the test.

         A non-empty address must be specified before the test is enabled."
    DEFVAL      { ''H }
    ::= { tmnxOamMcastTrCtlEntry 15 }

tmnxOamMcastTrCtlTestSubMode     OBJECT-TYPE
    SYNTAX      INTEGER {
        mcastTraceRouteV1 (1),
        mcastTraceRouteV2 (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrCtlTestSubMode specifies the type of IP
         multicast trace route to be performed.

         'mcastTraceRouteV1(1)' specifies an Internet Group Management Protocol
         (IGMP-based) multicast trace route test, using IETF
         draft-ietf-idmr-traceroute-ipm.

         'mcastTraceRouteV2(2)' specifies a UDP-based multicast trace route
         test, using IETF draft-ietf-mboned-mtrace-v2."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017."
    DEFVAL      { mcastTraceRouteV1 }
    ::= { tmnxOamMcastTrCtlEntry 16 }

tmnxOamMcastTrRespTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMcastTrRespEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMcastTrRespTable contains multicast-specific information
         learned from probe responses for 'mcastTraceRoute' tests.

         tmnxOamTrProbeHistoryTable contains the remainder of the information
         learned from probe responses for the tests."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017."
    ::= { tmnxOamTraceRouteObjs 17 }

tmnxOamMcastTrRespEntry          OBJECT-TYPE
    SYNTAX      TmnxOamMcastTrRespEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMcastTrRespEntry contains multicast-specific information
         learned from one probe response of a 'mcastTraceRoute' test.

         A row is created when a tmnxOamTrProbeHistoryTable row is created for
         a 'mcastTraceRoute' test.

         A row is destroyed when the corresponding tmnxOamTrProbeHistoryTable
         row is destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex
    }
    ::= { tmnxOamMcastTrRespTable 1 }

TmnxOamMcastTrRespEntry          ::= SEQUENCE
{
    tmnxOamMcastTrRespQueryArrivalTime Unsigned32,
    tmnxOamMcastTrRespInIfAddr       IpAddress,
    tmnxOamMcastTrRespOutIfAddr      IpAddress,
    tmnxOamMcastTrRespPrevHopRtrAddr IpAddress,
    tmnxOamMcastTrRespInPktCount     Counter32,
    tmnxOamMcastTrRespOutPktCount    Counter32,
    tmnxOamMcastTrRespSGPktCount     Counter32,
    tmnxOamMcastTrRespRtgProtocol    INTEGER,
    tmnxOamMcastTrRespFwdTtl         Unsigned32,
    tmnxOamMcastTrRespMBZBit         Unsigned32,
    tmnxOamMcastTrRespSrcBit         Unsigned32,
    tmnxOamMcastTrRespSrcMask        Unsigned32,
    tmnxOamMcastTrRespFwdCode        INTEGER,
    tmnxOamMcastTrRespInIfAddrType   InetAddressType,
    tmnxOamMcastTrRespInIfAddress    InetAddress,
    tmnxOamMcastTrRespOutIfAddrType  InetAddressType,
    tmnxOamMcastTrRespOutIfAddress   InetAddress,
    tmnxOamMcastTrRespPhRtrAddrType  InetAddressType,
    tmnxOamMcastTrRespPhRtrAddress   InetAddress,
    tmnxOamMcastTrRespInPktCountHC   Counter64,
    tmnxOamMcastTrRespOutPktCountHC  Counter64,
    tmnxOamMcastTrRespSGPktCountHC   Counter64,
    tmnxOamMcastTrRespRtgProtocol2   INTEGER,
    tmnxOamMcastTrRespMcastRtgProto  INTEGER,
    tmnxOamMcastTrRespInIfIndex      Unsigned32,
    tmnxOamMcastTrRespOutIfIndex     Unsigned32,
    tmnxOamMcastTrRespLocalAddrType  InetAddressType,
    tmnxOamMcastTrRespLocalAddress   InetAddress
}

tmnxOamMcastTrRespQueryArrivalTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespQueryArrivalTime indicates the time at
         which the specified hop received the multicast trace query/request.

         The timestamp is in 32 bit Network Time Protocol (NTP) format, as
         described in draft-ietf-idmr-traceroute-ipm."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000, Section 5.1, 'Query Arrival Time'."
    ::= { tmnxOamMcastTrRespEntry 1 }

tmnxOamMcastTrRespInIfAddr       OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMcastTrRespInIfAddrType and
         tmnxOamMcastTrRespInIfAddress."
    ::= { tmnxOamMcastTrRespEntry 2 }

tmnxOamMcastTrRespOutIfAddr      OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMcastTrRespOutIfAddrType and
         tmnxOamMcastTrRespOutIfAddress."
    ::= { tmnxOamMcastTrRespEntry 3 }

tmnxOamMcastTrRespPrevHopRtrAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 4.0 and replaced with
         InetAddress objects tmnxOamMcastTrRespPhRtrAddrType and
         tmnxOamMcastTrRespPhRtrAddress."
    ::= { tmnxOamMcastTrRespEntry 4 }

tmnxOamMcastTrRespInPktCount     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespInPktCount indicates the number of
         multicast packets received for all groups and sources on the test's
         incoming interface.  2^32-1 is returned if no count can be
         reported.

         This counter has the same value as IF-MIB::ifInMulticastPkts for the
         test's incoming interface.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV1(1)'."
    ::= { tmnxOamMcastTrRespEntry 5 }

tmnxOamMcastTrRespOutPktCount    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespOutPktCount indicates the number of
         multicast packets that have been transmitted or queued for transmission
         for all groups and sources on the test's outgoing interface.  2^32-1 is
         returned if no count can be reported.

         This counter has the same value as IF-MIB::ifOutMulticastPkts for the
         test's outgoing interface.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV1(1)'."
    ::= { tmnxOamMcastTrRespEntry 6 }

tmnxOamMcastTrRespSGPktCount     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespSGPktCount indicates the number of
         packets from the test's source forwarded by this router to the test's
         group.  2^32-1 is returned if no count can be reported.

         The value of tmnxOamMcastTrRespSrcBit and tmnxOamMcastTrRespSrcMask
         influence the interpretation of the counter.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV1(1)'."
    ::= { tmnxOamMcastTrRespEntry 7 }

tmnxOamMcastTrRespRtgProtocol    OBJECT-TYPE
    SYNTAX      INTEGER {
        unknown     (0),
        dvmrp       (1),
        mospf       (2),
        pim         (3),
        cbt         (4),
        pimSpecial  (5),
        pimStatic   (6),
        dvmrpStatic (7),
        bgp4Plus    (8),
        cbtSpecial  (9),
        cbtStatic   (10),
        pimAssert   (11)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespRtgProtocol indicates the routing
         protocol in use between this router and the previous-hop router.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV1(1)'."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000, Section 5.9, 'Rtg Protocol: 8 bits'."
    ::= { tmnxOamMcastTrRespEntry 8 }

tmnxOamMcastTrRespFwdTtl         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespFwdTtl indicates the TTL that a packet
         is required to have before it will be forwarded over the test's
         outgoing interface.

         This object is irrelevant when both
         1.  tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
         2.  The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
             IPv6."
    ::= { tmnxOamMcastTrRespEntry 9 }

tmnxOamMcastTrRespMBZBit         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespMBZBit indicates the Must Be Zero (MBZ)
         bit of an 'mcastTraceRoute' response probe.  Zero is expected.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV1(1)'."
    ::= { tmnxOamMcastTrRespEntry 10 }

tmnxOamMcastTrRespSrcBit         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespSrcBit indicates how to interpret the
         packet counters tmnxOamMcastTrRespSGPktCount and
         tmnxOamMcastTrRespSGPktCountHC.

         If tmnxOamMcastTrRespSrcBit is zero, SROS counts the packets from the
         test's source address forwarded by this router to the test's group
         address.

         Otherwise, SROS counts the packets from the test's source prefix
         forwarded by this router to the test's group address.  The source
         prefix is the source address, masked using
         tmnxOamMcastTrRespSrcMask."
    ::= { tmnxOamMcastTrRespEntry 11 }

tmnxOamMcastTrRespSrcMask        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespSrcMask indicates the prefix length
         used with the test's source address (i.e. tmnxOamMcastTrCtlSrcAddrType
         and tmnxOamMcastTrCtlSrcAddress) when computing
         tmnxOamMcastTrRespSGPktCount or tmnxOamMcastTrRespSGPktCountHC.

         If the router is forwarding solely on group state, then this value is
         larger than the maximum prefix length for the test's address family
         (i.e. 32 for IPv4; 128 for IPv6).

         This value is irrelevant if tmnxOamMcastTrRespSrcBit is zero."
    ::= { tmnxOamMcastTrRespEntry 12 }

tmnxOamMcastTrRespFwdCode        OBJECT-TYPE
    SYNTAX      INTEGER {
        noError       (0),
        wrongIf       (1),
        pruneSent     (2),
        pruneRecvd    (3),
        scoped        (4),
        noRoute       (5),
        wrongLastHop  (6),
        notForwarding (7),
        reachedRP     (8),
        rpfIf         (9),
        noMulticast   (10),
        infoHidden    (11),
        reachedGW     (12),
        unknownQuery  (13),
        fatalError    (128),
        noSpace       (129),
        oldRouter     (130),
        adminProhib   (131),
        unknown       (132)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespFwdCode indicates a forwarding
         information/error code:
         noError      (0) - No error
         wrongIf      (1) - Traceroute request arrived on an interface to
                            which this router would not forward for this
                            source,group,destination.
         pruneSent    (2) - This router has sent a prune upstream which
                            applies to the source and group in the traceroute
                            request.
         pruneRecvd   (3) - This router has stopped forwarding for this
                            source and group in response to a request from
                            the next hop router.
         scoped       (4) - The group is subject to administrative scoping
                            at this hop.
         noRoute      (5) - This router has no route for the source or
                            group and no way to determine a potential route.
         wrongLastHop (6) - This router is not the proper last-hop router.
         notForwarding(7) - This router is not forwarding this
                            source,group out the outgoing interface for an
                            unspecified reason.
         reachedRP    (8) - Reached Rendezvous Point or Core.
         rpfIf        (9) - Traceroute request arrived on the expected RPF
                            interface for this source,group.
         noMulticast (10) - Traceroute request arrived on an interface
                            which is not enabled for multicast.
         infoHidden  (11) - One or more hops have been hidden from this trace.
         reachedGW   (12) - Mtrace2 Request arrived on a gateway (e.g. a NAT or
                            firewall) that hides the information between this
                            router and the Mtrace2 client.
         unknownQuery(13) - A non-transitive Extended Query Type was received by
                            a router which does not support the type.
         fatalError (128) - Router may know the previous hop but cannot forward
                            the message to it.
         noSpace    (129) - There was not enough room to insert another
                            response data block in the packet.
         oldRouter  (130) - The previous hop router does not understand
                            traceroute requests.
         adminProhib(131) - Traceroute is administratively prohibited.
         unknown    (132) - Unknown forwarding code received."
    ::= { tmnxOamMcastTrRespEntry 13 }

tmnxOamMcastTrRespInIfAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespInIfAddrType indicates the type of IP
         address stored in tmnxOamMcastTrRespInIfAddress."
    ::= { tmnxOamMcastTrRespEntry 14 }

tmnxOamMcastTrRespInIfAddress    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespInIfAddress indicates the IP address of
         the interface on which packets from the test's source and group are
         expected to arrive.

         In the case of an mtrace test, the value is copied from the Incoming
         Interface Address field of the Response Data segment.

         In the case of an Mtrace2 IPv4 test, the value is copied from the
         Incoming Interface Address field of the IPv4 Mtrace2 Standard Response
         Block.

         The IPv4 address 0.0.0.0 is returned if the address is unknown.

         This object is irrelevant when both
         1.  tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
         2.  The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
             IPv6."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000, Section 5.2, 'Incoming Interface Address'.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 15 }

tmnxOamMcastTrRespOutIfAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespOutIfAddrType indicates the type of IP
         address stored in tmnxOamMcastTrRespOutIfAddress."
    ::= { tmnxOamMcastTrRespEntry 16 }

tmnxOamMcastTrRespOutIfAddress   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespOutIfAddress indicates the IP address
         of the interface on which packets from the test's source and group
         flow to the specified destination.

         In the case of an mtrace test, the value is copied from the Outgoing
         Interface Address field of the Response Data segment.

         In the case of an Mtrace2 IPv4 test, the value is copied from the
         Outgoing Interface Address field of the IPv4 Mtrace2 Standard Response
         Block.

         The IPv4 address 0.0.0.0 is returned if the address is unknown.

         This object is irrelevant when both
         1.  tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
         2.  The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
             IPv6."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000, Section 5.3, 'Outgoing Interface Address'.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 17 }

tmnxOamMcastTrRespPhRtrAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespPhRtrAddrType indicates the type of IP
         address stored in tmnxOamMcastTrRespPhRtrAddress."
    ::= { tmnxOamMcastTrRespEntry 18 }

tmnxOamMcastTrRespPhRtrAddress   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespPhRtrAddress indicates the IP address
         of the router from which this router expects packets for this source.
         This may be a multicast group (e.g. ALL-[protocol]-ROUTERS.MCAST.NET)
         if the previous hop is not known because of the workings of the
         multicast routing protocol.

         In the case of an mtrace test, the value is copied from the
         Previous-Hop Router Address field of the Response Data segment.

         In the case of an Mtrace2 IPv4 test, the value is copied from the
         Upstream Router Address field of the IPv4 Mtrace2 Standard Response
         Block.

         In the case of an Mtrace2 IPv6 test, the value is copied from the
         Remote Address field of the IPv6 Mtrace2 Standard Response Block.

         If the address is unknown, an all-zeros IPv4 or IPv6 address is
         returned."
    REFERENCE
        "IETF draft-ietf-idmr-traceroute-ipm-07, 'A traceroute facility for IP
         Multicast', 14-Jul-2000, Section 5.4, 'Previous-Hop Router Address'.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'.
         IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.5, 'IPv6 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 19 }

tmnxOamMcastTrRespInPktCountHC   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespInPktCountHC indicates the number of
         multicast packets received for all groups and sources on the test's
         incoming interface.  2^64-1 is returned if no count can be
         reported.

         This counter has the same value as IF-MIB::ifHCInMulticastPkts for the
         test's incoming interface.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV2(2)'."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 20 }

tmnxOamMcastTrRespOutPktCountHC  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespOutPktCountHC indicates the number of
         multicast packets that have been transmitted or queued for transmission
         for all groups and sources on the test's outgoing interface.  2^64-1 is
         returned if no count can be reported.

         This counter has the same value as IF-MIB::ifHCOutMulticastPkts for
         the test's outgoing interface.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV2(2)'."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 21 }

tmnxOamMcastTrRespSGPktCountHC   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespSGPktCountHC indicates the number of
         packets from the test's source forwarded by this router to the test's
         group.  2^64-1 is returned if no count can be reported.

         The value of tmnxOamMcastTrRespSrcBit and tmnxOamMcastTrRespSrcMask
         influence the interpretation of the counter.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV2(2)'."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 22 }

tmnxOamMcastTrRespRtgProtocol2   OBJECT-TYPE
    SYNTAX      INTEGER {
        unknown    (0),
        other      (1),
        local      (2),
        netmgmt    (3),
        icmp       (4),
        egp        (5),
        ggp        (6),
        hello      (7),
        rip        (8),
        isIs       (9),
        esIs       (10),
        ciscoIgrp  (11),
        bbnSpfIgp  (12),
        ospf       (13),
        bgp        (14),
        idpr       (15),
        ciscoEigrp (16),
        dvmrp      (17),
        rpl        (18),
        dhcp       (19),
        ttdp       (20)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespRtgProtocol2 indicates the unicast
         routing protocol running between this router and the upstream router.

         The code points are the IANA-RTPROTO-MIB::IANAipRouteProtocol code
         points, with 'unknown(0)' added.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV2(2)'."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'.
         IANA https://www.iana.org/assignments/ianaiprouteprotocol-mib/
         ianaiprouteprotocol-mib, TEXTUAL-CONVENTION IANAipRouteProtocol."
    ::= { tmnxOamMcastTrRespEntry 23 }

tmnxOamMcastTrRespMcastRtgProto  OBJECT-TYPE
    SYNTAX      INTEGER {
        unknown        (0),
        other          (1),
        local          (2),
        netmgmt        (3),
        dvmrp          (4),
        mospf          (5),
        pimSparseDense (6),
        cbt            (7),
        pimSparseMode  (8),
        pimDenseMode   (9),
        igmpOnly       (10),
        bgmp           (11),
        msdp           (12)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespMcastRtgProto indicates the multicast
         routing protocol in use between this router and the upstream router.

         The code points are the IANA-RTPROTO-MIB::IANAipMRouteProtocol code
         points, with 'unknown(0)' added.

         This object is relevant when tmnxOamMcastTrCtlTestSubMode is
         'mcastTraceRouteV2(2)'."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv4 Mtrace2
         Standard Response Block'.
         IANA https://www.iana.org/assignments/ianaiprouteprotocol-mib/
         ianaiprouteprotocol-mib, TEXTUAL-CONVENTION IANAipMRouteProtocol."
    ::= { tmnxOamMcastTrRespEntry 24 }

tmnxOamMcastTrRespInIfIndex      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespInIfIndex indicates the value in the
         Incoming Interface ID field of the IPv6 Mtrace2 Standard Response
         Block.

         In the case of an IPv6 Mtrace2 Standard Response Block provided by a
         router running SROS, the value returned is a global interface
         identifier (i.e. a TIMETRA-VRTR-MIB::vRtrIfGlobalIndex value).

         This object is relevant when both
         1.  tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
         2.  The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
             IPv6."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv6 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 25 }

tmnxOamMcastTrRespOutIfIndex     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespOutIfIndex indicates the value in the
         Outgoing Interface ID field of the IPv6 Mtrace2 Standard Response
         Block.

         In the case of an IPv6 Mtrace2 Standard Response Block provided by a
         router running SROS, the value returned is a global interface
         identifier (i.e. a TIMETRA-VRTR-MIB::vRtrIfGlobalIndex value).

         This object is relevant when both
         1.  tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
         2.  The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
             IPv6."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.4, 'IPv6 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 26 }

tmnxOamMcastTrRespLocalAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespLocalAddrType indicates the type of IP
         address stored in tmnxOamMcastTrRespLocalAddress."
    ::= { tmnxOamMcastTrRespEntry 27 }

tmnxOamMcastTrRespLocalAddress   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMcastTrRespLocalAddress indicates the IP address
         of the router that provided this 'mcastTraceRoute(4)' response.

         The value is copied from the Local Address field of the IPv6 Mtrace2
         Standard Response Block.

         This object is relevant when both
         1.  tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
         2.  The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
             IPv6."
    REFERENCE
        "IETF draft-ietf-mboned-mtrace-v2-17, 'Mtrace Version 2: Traceroute
         Facility for IP Multicast', 12-Mar-2017, Section 3.2.5, 'IPv6 Mtrace2
         Standard Response Block'."
    ::= { tmnxOamMcastTrRespEntry 28 }

tmnxOamLTtraceCtlTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLTtraceCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row in tmnxOamLTtraceCtlTable contains the LDP-tree-trace-specific
         configuration information needed to launch a foreground LDP (Label
         Distribution Protocol) tree trace test.  The rest of the configuration
         information needed to launch the test resides in the corresponding row
         of tmnxOamTrCtlTable."
    ::= { tmnxOamTraceRouteObjs 18 }

tmnxOamLTtraceCtlEntry           OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The system creates a row in tmnxOamLTtraceCtlTable when
         tmnxOamTrCtlTestMode is set to 'ldpTreeTrace'.

         The system destroys a row in tmnxOamLTtraceCtlTable when the
         corresponding row in tmnxOamTrCtlTable is destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamLTtraceCtlTable 1 }

TmnxOamLTtraceCtlEntry           ::= SEQUENCE
{
    tmnxOamLTtraceCtlLdpPrefixType   InetAddressType,
    tmnxOamLTtraceCtlLdpPrefix       InetAddress,
    tmnxOamLTtraceCtlLdpPrefixLen    InetAddressPrefixLength,
    tmnxOamLTtraceCtlMaxPath         Unsigned32,
    tmnxOamLTtraceCtlDownstreamMpTlv TmnxOamMplsEchoDownMapTlv
}

tmnxOamLTtraceCtlLdpPrefixType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceCtlLdpPrefixType specifies the type of
         Internet address stored in tmnxOamLTtraceCtlLdpPrefix."
    DEFVAL      { unknown }
    ::= { tmnxOamLTtraceCtlEntry 2 }

tmnxOamLTtraceCtlLdpPrefix       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceCtlLdpPrefix specifies the Internet address
         prefix for the LDP based LSP for this LDP tree trace test."
    DEFVAL      { ''H }
    ::= { tmnxOamLTtraceCtlEntry 3 }

tmnxOamLTtraceCtlLdpPrefixLen    OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    UNITS       "bits"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceCtlLdpPrefixLen specifies the Internet
         address prefix length for the LDP based LSP for this LDP tree trace
         test.

         The value of this parameter is valid only when the LDP prefix
         (tmnxOamLTtraceCtlLdpPrefix) has been specified."
    DEFVAL      { 32 }
    ::= { tmnxOamLTtraceCtlEntry 4 }

tmnxOamLTtraceCtlMaxPath         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceCtlMaxPath specifies the maximum number of
         paths that can be discovered for the given LDP Prefix
         (tmnxOamLTtraceCtlLdpPrefix)."
    DEFVAL      { 128 }
    ::= { tmnxOamLTtraceCtlEntry 5 }

tmnxOamLTtraceCtlDownstreamMpTlv OBJECT-TYPE
    SYNTAX      TmnxOamMplsEchoDownMapTlv
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceCtlDownstreamMpTlv specifies the type of
         downstream mapping TLV to insert in the MPLS echo request PDUs when
         launching the test.

         When an LDP tree trace test is created, the value of this object
         defaults to the value of the global configuration object
         tmnxOamMplsEchoDownstreamMapTlv."
    ::= { tmnxOamLTtraceCtlEntry 6 }

tmnxOamLTtraceMaxConRequests     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "requests"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceMaxConRequests indicates the maximum number
         of concurrent LDP Tree Trace manual discovery sessions that are
         allowed within an agent implementation."
    ::= { tmnxOamTraceRouteObjs 19 }

tmnxOamLTtraceResultsTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLTtraceResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceResultsTable contains the run-level test results for
         'ldpTreeTrace' tests."
    ::= { tmnxOamTraceRouteObjs 20 }

tmnxOamLTtraceResultsEntry       OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceResultsEntry contains the run-level test results for one
         'ldpTreeTrace' test run.

         A row is created when an 'ldpTreeTrace' test is enabled (using
         tmnxOamTrCtlAdminStatus).

         A row is destroyed when:
         1.  The corresponding test configuration is destroyed (using
         tmnxOamTrCtlRowStatus), or
         2.  Results are cleared for the test (using
         TIMETRA-CLEAR-MIB::tmnxClearAction), or
         3.  A new run result is available, and the limit on the number of
         run results retained (3, currently) has been reached.  In that case,
         the oldest run result row is destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamLTtraceResultsTable 1 }

TmnxOamLTtraceResultsEntry       ::= SEQUENCE
{
    tmnxOamLTtraceResultsDisPaths    Unsigned32,
    tmnxOamLTtraceResultsFailedHops  Unsigned32,
    tmnxOamLTtraceResultsDisState    INTEGER,
    tmnxOamLTtraceResultsDisStatus   TmnxOamLTtraceDisStatusBits
}

tmnxOamLTtraceResultsDisPaths    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceResultsDisPaths indicates the number of
         discovered ECMP paths in this OAM LDP Tree discovery test."
    ::= { tmnxOamLTtraceResultsEntry 2 }

tmnxOamLTtraceResultsFailedHops  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceResultsFailedHops indicates the number of
         hops from which no successful response was received during this OAM
         LDP Tree discovery test."
    ::= { tmnxOamLTtraceResultsEntry 3 }

tmnxOamLTtraceResultsDisState    OBJECT-TYPE
    SYNTAX      INTEGER {
        initial    (0),
        inProgress (1),
        done       (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceResultsDisState indicates the current state
         of the discovery process for the LDP IP prefix
         (tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test."
    ::= { tmnxOamLTtraceResultsEntry 4 }

tmnxOamLTtraceResultsDisStatus   OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceDisStatusBits
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceResultsDisStatus indicates the current
         discovery status bits for the LDP IP prefix
         (tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test."
    ::= { tmnxOamLTtraceResultsEntry 5 }

tmnxOamLTtraceHopInfoTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLTtraceHopInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceHopInfoTable contains the TTL-level test results for
         'ldpTreeTrace' tests."
    ::= { tmnxOamTraceRouteObjs 21 }

tmnxOamLTtraceHopInfoEntry       OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceHopInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceHopInfoEntry contains the TTL-level test results for one
         TTL of one 'ldpTreeTrace' test.

         A row is created when a TTL is probed by an 'ldpTreeTrace' test run.

         Rows are destroyed when the corresponding tmnxOamLTtraceResultsTable
         row is destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamLTtraceHopIndex
    }
    ::= { tmnxOamLTtraceHopInfoTable 1 }

TmnxOamLTtraceHopInfoEntry       ::= SEQUENCE
{
    tmnxOamLTtraceHopIndex           Unsigned32,
    tmnxOamLTtraceUpStreamHopIndex   Unsigned32,
    tmnxOamLTtraceHopAddrType        InetAddressType,
    tmnxOamLTtraceHopAddr            InetAddress,
    tmnxOamLTtraceHopDstAddrType     InetAddressType,
    tmnxOamLTtraceHopDstAddr         InetAddress,
    tmnxOamLTtraceHopEgrNhAddrType   InetAddressType,
    tmnxOamLTtraceHopEgrNhAddr       InetAddress,
    tmnxOamLTtraceHopDisTtl          Unsigned32,
    tmnxOamLTtraceHopLastRc          TmnxOamPingRtnCode,
    tmnxOamLTtraceHopDiscoveryState  INTEGER,
    tmnxOamLTtraceHopDiscoveryTime   TimeStamp,
    tmnxOamLTtraceHopLabel1          MplsLabel,
    tmnxOamLTtraceHopLabel2          MplsLabel,
    tmnxOamLTtraceHopLabel3          MplsLabel,
    tmnxOamLTtraceHopLabel4          MplsLabel,
    tmnxOamLTtraceHopLabel5          MplsLabel,
    tmnxOamLTtraceHopLabel6          MplsLabel,
    tmnxOamLTtraceHopIfAddrType      InetAddressType,
    tmnxOamLTtraceHopIfAddress       InetAddress,
    tmnxOamLTtraceHopRouterIdType    InetAddressType,
    tmnxOamLTtraceHopRouterId        InetAddress
}

tmnxOamLTtraceHopIndex           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopIndex indicates the hop index for an
         Nokia SROS OAM Trace hop for an LDP Tree Trace test. The hop index
         values are assigned starting at 1."
    ::= { tmnxOamLTtraceHopInfoEntry 1 }

tmnxOamLTtraceUpStreamHopIndex   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceUpStreamHopIndex indicates the
         hop index (tmnxOamLTtraceHopIndex) of its upstream hop
         discovered during the LDP Tree Trace test.  The value of
         tmnxOamLTtraceUpStreamHopIndex is 0 for the hops which are
         the root of the different discovered paths for the LDP
         Tree Trace test."
    ::= { tmnxOamLTtraceHopInfoEntry 2 }

tmnxOamLTtraceHopAddrType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopAddrType indicates the type of Internet
         address stored in tmnxOamLTtraceHopAddr."
    ::= { tmnxOamLTtraceHopInfoEntry 3 }

tmnxOamLTtraceHopAddr            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopAddr indicates the IP address of a hop
         for a given LDP based LSP associated with the OAM LDP Tree trace test."
    ::= { tmnxOamLTtraceHopInfoEntry 4 }

tmnxOamLTtraceHopDstAddrType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopDstAddrType indicates the type of
         Internet address stored in tmnxOamLTtraceHopDstAddr."
    ::= { tmnxOamLTtraceHopInfoEntry 5 }

tmnxOamLTtraceHopDstAddr         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopDstAddr indicates the destination IP
         address (127 Address) of a path associated with the hop."
    ::= { tmnxOamLTtraceHopInfoEntry 6 }

tmnxOamLTtraceHopEgrNhAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopEgrNhAddrType indicates the type of
         Internet address stored in tmnxOamLTtraceHopEgrNhAddr."
    ::= { tmnxOamLTtraceHopInfoEntry 7 }

tmnxOamLTtraceHopEgrNhAddr       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopEgrNhAddr indicates the next hop IP
         address (wrt the ingress router), which is used to reach this Hop
         (tmnxOamLTtraceHopAddr)."
    ::= { tmnxOamLTtraceHopInfoEntry 8 }

tmnxOamLTtraceHopDisTtl          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopDisTtl indicates the label time-to-live
         value used to discover this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 9 }

tmnxOamLTtraceHopLastRc          OBJECT-TYPE
    SYNTAX      TmnxOamPingRtnCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopLastRc indicates the OAM return code
         received in the OAM trace response."
    ::= { tmnxOamLTtraceHopInfoEntry 10 }

tmnxOamLTtraceHopDiscoveryState  OBJECT-TYPE
    SYNTAX      INTEGER {
        inProgress       (0),
        doneOk           (1),
        doneTimeout      (2),
        doneLoopDetected (3),
        doneExpiredTtl   (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopDiscoveryState indicates the current
         discovery state of this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 11 }

tmnxOamLTtraceHopDiscoveryTime   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopDiscoveryTime indicates the sysUpTime
         when the hop was discovered."
    ::= { tmnxOamLTtraceHopInfoEntry 12 }

tmnxOamLTtraceHopLabel1          OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopLabel1 indicates the first (top of the
         label stack) label for this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 13 }

tmnxOamLTtraceHopLabel2          OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopLabel2 indicates the second label for
         this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 14 }

tmnxOamLTtraceHopLabel3          OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopLabel3 indicates the third label for
         this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 15 }

tmnxOamLTtraceHopLabel4          OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopLabel4 indicates the fourth label for
         this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 16 }

tmnxOamLTtraceHopLabel5          OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopLabel5 indicates the fifth label for
         this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 17 }

tmnxOamLTtraceHopLabel6          OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopLabel6 indicates the sixth label for
         this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 18 }

tmnxOamLTtraceHopIfAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopIfAddrType indicates the IP address type
         for the interface IP address for this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 19 }

tmnxOamLTtraceHopIfAddress       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopIfAddress indicates the IP Address for
         the interface for this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 20 }

tmnxOamLTtraceHopRouterIdType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopRouterIdType indicates the IP address
         type for the Router ID for this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 21 }

tmnxOamLTtraceHopRouterId        OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceHopRouterId indicates the IP Address for
         the Router ID for this hop."
    ::= { tmnxOamLTtraceHopInfoEntry 22 }

tmnxOamLTtraceAutoConfigTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLTtraceAutoConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceAutoConfigTable contains configuration information for
         background LDP Tree Trace for the Base virtual router.

         Results are available in
             tmnxOamLTtraceAutoStatusTable,
             tmnxOamLTtraceFecInfoTable,
             tmnxOamLTtracePathInfoTable."
    ::= { tmnxOamTraceRouteObjs 22 }

tmnxOamLTtraceAutoConfigEntry    OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceAutoConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceAutoConfigEntry contains configuration information for
         background LDP Tree Trace for the Base virtual router.

         A row can be created or destroyed using tmnxOamLTtraceAutoRowStatus.

         Destroying a row destroys the corresponding rows in
             tmnxOamLTtraceAutoStatusTable,
             tmnxOamLTtraceFecInfoTable,
             tmnxOamLTtracePathInfoTable."
    INDEX       { vRtrID }
    ::= { tmnxOamLTtraceAutoConfigTable 1 }

TmnxOamLTtraceAutoConfigEntry    ::= SEQUENCE
{
    tmnxOamLTtraceAutoRowStatus      RowStatus,
    tmnxOamLTtraceAutoLastChanged    TimeStamp,
    tmnxOamLTtraceAutoStorageType    StorageType,
    tmnxOamLTtraceAutoAdminState     TmnxAdminState,
    tmnxOamLTtraceAutoFcName         TFCName,
    tmnxOamLTtraceAutoProfile        TProfile,
    tmnxOamLTtraceAutoDiscIntvl      Unsigned32,
    tmnxOamLTtraceAutoMaxPath        Unsigned32,
    tmnxOamLTtraceAutoTrMaxTtl       Unsigned32,
    tmnxOamLTtraceAutoTrTimeOut      Unsigned32,
    tmnxOamLTtraceAutoTrMaxFailures  Unsigned32,
    tmnxOamLTtraceAutoPolicy1        TPolicyStatementNameOrEmpty,
    tmnxOamLTtraceAutoPolicy2        TPolicyStatementNameOrEmpty,
    tmnxOamLTtraceAutoPolicy3        TPolicyStatementNameOrEmpty,
    tmnxOamLTtraceAutoPolicy4        TPolicyStatementNameOrEmpty,
    tmnxOamLTtraceAutoPolicy5        TPolicyStatementNameOrEmpty,
    tmnxOamLTtraceAutoProbeIntvl     Unsigned32,
    tmnxOamLTtraceAutoPrTimeOut      Unsigned32,
    tmnxOamLTtraceAutoPrMaxFailures  Unsigned32
}

tmnxOamLTtraceAutoRowStatus      OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoRowStatus specifies the row status of
         the background LDP Tree Trace instance.

         When creating a row, the INDEX value vRtrID=1 (i.e. the Base virtual
         router) must be specified.

         An attempt to destroy a row will fail if tmnxOamLTtraceAutoAdminState
         is 'inService(2)'."
    ::= { tmnxOamLTtraceAutoConfigEntry 1 }

tmnxOamLTtraceAutoLastChanged    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoLastChanged indicates the last time the
         value of a writable object in this row was modified."
    ::= { tmnxOamLTtraceAutoConfigEntry 2 }

tmnxOamLTtraceAutoStorageType    OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 14.0 R1.  There is no
         replacement object."
    DEFVAL      { volatile }
    ::= { tmnxOamLTtraceAutoConfigEntry 3 }

tmnxOamLTtraceAutoAdminState     OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoAdminState specifies the administrative
         state of the background LDP Tree Discovery process.

         When tmnxOamLTtraceAutoAdminState becomes 'inService(2)', the
         background LDP Tree Discovery process starts, and periodic
         path-probing on the previously discovered paths, if any, continues.

         When tmnxOamLTtraceAutoAdminState becomes 'outOfService(3)', the
         background LDP Tree Discovery process and periodic path-probing on the
         discovered paths stops.

         At the start of the discovery process, it selects the address FECs
         imported from LDP peers (TIMETRA-LDP-MIB::vRtrLdpAddrFecTable)
         provided the FECs pass the configured policies
         (tmnxOamLTtraceAutoPolicy1..tmnxOamLTtraceAutoPolicy5).  For all the
         FECs (tmnxOamLTtraceAutoTotalFecs), it automatically creates rows in
         the tmnxOamLTtraceFecInfoTable. As a part of the background discovery
         process, it creates rows in the tmnxOamLTtracePathInfoTable for each
         discovered path."
    DEFVAL      { outOfService }
    ::= { tmnxOamLTtraceAutoConfigEntry 4 }

tmnxOamLTtraceAutoFcName         OBJECT-TYPE
    SYNTAX      TFCName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoFcName specifies the forwarding class
         of the MPLS Echo request packets.

         The forwarding class name must match the INDEX of a row of
         TIMETRA-QOS-MIB::tFCNameTable."
    DEFVAL      { "be" }
    ::= { tmnxOamLTtraceAutoConfigEntry 5 }

tmnxOamLTtraceAutoProfile        OBJECT-TYPE
    SYNTAX      TProfile
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoProfile specifies the QoS profile to be
         used with the forwarding class specified in tmnxOamLTtraceAutoFcName."
    DEFVAL      { out }
    ::= { tmnxOamLTtraceAutoConfigEntry 6 }

tmnxOamLTtraceAutoDiscIntvl      OBJECT-TYPE
    SYNTAX      Unsigned32 (60..1440)
    UNITS       "minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoDiscIntvl specifies the number of
         minutes to wait before repeating the background LDP Tree Discovery
         process."
    DEFVAL      { 60 }
    ::= { tmnxOamLTtraceAutoConfigEntry 7 }

tmnxOamLTtraceAutoMaxPath        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..128)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoMaxPath specifies the maximum number of
         paths that can be discovered for a selected IP Address FEC
         (tmnxOamLTtraceAutoTotalFecs)."
    DEFVAL      { 128 }
    ::= { tmnxOamLTtraceAutoConfigEntry 8 }

tmnxOamLTtraceAutoTrMaxTtl       OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    UNITS       "time-to-live value"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoTrMaxTtl specifies the maximum label
         time-to-live value for an MPLS trace request during the tree
         discovery."
    DEFVAL      { 30 }
    ::= { tmnxOamLTtraceAutoConfigEntry 9 }

tmnxOamLTtraceAutoTrTimeOut      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoTrTimeOut specifies the timeout value,
         in seconds, for an MPLS trace request during the tree discovery."
    DEFVAL      { 30 }
    ::= { tmnxOamLTtraceAutoConfigEntry 10 }

tmnxOamLTtraceAutoTrMaxFailures  OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    UNITS       "timeouts"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoTrMaxFailures specifies the maximum
         number of consecutive timeouts allowed before terminating transmission
         of MPLS trace requests to a hop."
    DEFVAL      { 3 }
    ::= { tmnxOamLTtraceAutoConfigEntry 11 }

tmnxOamLTtraceAutoPolicy1        OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoPolicy1 specifies the first policy used
         to filter LDP imported Address FECs.

         The name should match the INDEX of a
         TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row.  Otherwise,
         it is ignored."
    DEFVAL      { ''H }
    ::= { tmnxOamLTtraceAutoConfigEntry 12 }

tmnxOamLTtraceAutoPolicy2        OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoPolicy2 specifies the second policy
         used to filter LDP imported Address FECs.

         The name should match the INDEX of a
         TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row.  Otherwise,
         it is ignored."
    DEFVAL      { ''H }
    ::= { tmnxOamLTtraceAutoConfigEntry 13 }

tmnxOamLTtraceAutoPolicy3        OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoPolicy3 specifies the third policy used
         to filter LDP imported Address FECs.

         The name should match the INDEX of a
         TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row.  Otherwise,
         it is ignored."
    DEFVAL      { ''H }
    ::= { tmnxOamLTtraceAutoConfigEntry 14 }

tmnxOamLTtraceAutoPolicy4        OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoPolicy4 specifies the fourth policy
         used to filter LDP imported Address FECs.

         The name should match the INDEX of a
         TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row.  Otherwise,
         it is ignored."
    DEFVAL      { ''H }
    ::= { tmnxOamLTtraceAutoConfigEntry 15 }

tmnxOamLTtraceAutoPolicy5        OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoPolicy5 specifies the fifth policy used
         to filter LDP imported Address FECs.

         The name should match the INDEX of a
         TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row.  Otherwise,
         it is ignored."
    DEFVAL      { ''H }
    ::= { tmnxOamLTtraceAutoConfigEntry 16 }

tmnxOamLTtraceAutoProbeIntvl     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoProbeIntvl specifies the number of
         minutes to wait before repeating probing (pinging) a discovered path."
    DEFVAL      { 1 }
    ::= { tmnxOamLTtraceAutoConfigEntry 17 }

tmnxOamLTtraceAutoPrTimeOut      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..3)
    UNITS       "minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoPrTimeOut specifies the timeout value,
         in minutes, for a ping request during probing.

         tmnxOamLTtraceAutoPrTimeOut cannot be greater than
         tmnxOamLTtraceAutoProbeIntvl."
    DEFVAL      { 1 }
    ::= { tmnxOamLTtraceAutoConfigEntry 18 }

tmnxOamLTtraceAutoPrMaxFailures  OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    UNITS       "timeouts"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoPrMaxFailures specifies the maximum
         number of consecutive timeouts allowed before failing a path probe
         (ping)."
    DEFVAL      { 3 }
    ::= { tmnxOamLTtraceAutoConfigEntry 19 }

tmnxOamLTtraceAutoStatusTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLTtraceAutoStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceAutoStatusTable contains status information for
         background LDP Tree Trace for the Base virtual router.

         Background LDP tree trace is configured using
         tmnxOamLTtraceAutoConfigTable."
    ::= { tmnxOamTraceRouteObjs 23 }

tmnxOamLTtraceAutoStatusEntry    OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceAutoStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceAutoStatusEntry contains status information for
         background LDP Tree Trace for the Base virtual router.

         A row is created/destroyed when a row is created/destroyed in
         tmnxOamLTtraceAutoConfigTable."
    INDEX       { vRtrID }
    ::= { tmnxOamLTtraceAutoStatusTable 1 }

TmnxOamLTtraceAutoStatusEntry    ::= SEQUENCE
{
    tmnxOamLTtraceAutoDiscoveryState INTEGER,
    tmnxOamLTtraceAutoTotalFecs      Unsigned32,
    tmnxOamLTtraceAutoDisFecs        Unsigned32,
    tmnxOamLTtraceAutoLastDisStart   TimeStamp,
    tmnxOamLTtraceAutoLastDisEnd     TimeStamp,
    tmnxOamLTtraceAutoLastDisDur     Unsigned32
}

tmnxOamLTtraceAutoDiscoveryState OBJECT-TYPE
    SYNTAX      INTEGER {
        initial    (0),
        inProgress (1),
        done       (2),
        halt       (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoDiscoveryState indicates the current
         state of the discovery process."
    ::= { tmnxOamLTtraceAutoStatusEntry 1 }

tmnxOamLTtraceAutoTotalFecs      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoTotalFecs indicates the number of
         Address FECs that have been selected for discovery during the current
         discovery process.

         An Address FEC imported from an LDP peer
         (TIMETRA-LDP-MIB::vRtrLdpAddrFecTable) is selected if it passes the
         associated policies (tmnxOamLTtraceAutoPolicy1..
         tmnxOamLTtraceAutoPolicy5)."
    ::= { tmnxOamLTtraceAutoStatusEntry 2 }

tmnxOamLTtraceAutoDisFecs        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoDisFecs indicates the number of
         selected Address FECs that have been discovered successfully during
         the current discovery process."
    ::= { tmnxOamLTtraceAutoStatusEntry 3 }

tmnxOamLTtraceAutoLastDisStart   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoLastDisStart indicates the
         sysUpTime when the last background discovery process started.  If
         no discovery process has started, the value is zero."
    ::= { tmnxOamLTtraceAutoStatusEntry 4 }

tmnxOamLTtraceAutoLastDisEnd     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoLastDisEnd indicates the
         sysUpTime when the last background discovery process ended. Before
         the first discovery process ends, it is zero.  This value is set at
         the end of a discovery process.  This value is not reset during
         starting/restarting."
    ::= { tmnxOamLTtraceAutoStatusEntry 5 }

tmnxOamLTtraceAutoLastDisDur     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceAutoLastDisDur indicates the time
         (in seconds) it took to finish the last discovery process.  If no test
         has been finished, the value is 0.  This value is updated only when
         a discovery ends."
    ::= { tmnxOamLTtraceAutoStatusEntry 6 }

tmnxOamLTtraceFecInfoTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLTtraceFecInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceFecInfoTable contains per-FEC (i.e. per-prefix)
         information discovered by background LDP tree trace.

         Background LDP tree trace is configured using
         tmnxOamLTtraceAutoConfigTable."
    ::= { tmnxOamTraceRouteObjs 24 }

tmnxOamLTtraceFecInfoEntry       OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceFecInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtraceFecInfoEntry contains information about one FEC
         discovered by background LDP tree trace.

         Rows are created and destroyed by SROS."
    INDEX       {
        vRtrID,
        tmnxOamLTtraceFecPrefixType,
        tmnxOamLTtraceFecPrefix,
        tmnxOamLTtraceFecPrefLen
    }
    ::= { tmnxOamLTtraceFecInfoTable 1 }

TmnxOamLTtraceFecInfoEntry       ::= SEQUENCE
{
    tmnxOamLTtraceFecPrefixType      InetAddressType,
    tmnxOamLTtraceFecPrefix          InetAddress,
    tmnxOamLTtraceFecPrefLen         InetAddressPrefixLength,
    tmnxOamLTtraceFecDiscoveryState  INTEGER,
    tmnxOamLTtraceFecDisStatusBits   TmnxOamLTtraceDisStatusBits,
    tmnxOamLTtraceFecDisPaths        Unsigned32,
    tmnxOamLTtraceFecFailedHops      Unsigned32,
    tmnxOamLTtraceFecLastDisEnd      TimeStamp,
    tmnxOamLTtraceFecFailedProbes    Unsigned32,
    tmnxOamLTtraceFecProbeState      INTEGER,
    tmnxOamLTtraceFecSendErrProbes   Unsigned32
}

tmnxOamLTtraceFecPrefixType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecPrefixType specifies the type of
         remote IP address stored in tmnxOamLTtraceFecPrefix.  Currently
         only 'ipv4(1)' is supported."
    ::= { tmnxOamLTtraceFecInfoEntry 1 }

tmnxOamLTtraceFecPrefix          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecPrefix specifies the Internet address
         prefix for an LDP based LSP associated with the OAM LDP Tree trace
         test."
    ::= { tmnxOamLTtraceFecInfoEntry 2 }

tmnxOamLTtraceFecPrefLen         OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    UNITS       "bits"
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecPrefLen specifies the Internet address
         prefix length for the LDP based LSP associated with the OAM LDP Tree
         trace test."
    ::= { tmnxOamLTtraceFecInfoEntry 3 }

tmnxOamLTtraceFecDiscoveryState  OBJECT-TYPE
    SYNTAX      INTEGER {
        initial    (0),
        inProgress (1),
        done       (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecDiscoveryState indicates the current
         state of the discovery process for the Address FEC."
    ::= { tmnxOamLTtraceFecInfoEntry 4 }

tmnxOamLTtraceFecDisStatusBits   OBJECT-TYPE
    SYNTAX      TmnxOamLTtraceDisStatusBits
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecDisStatusBits indicates the current
         discovery status bits for the Address FEC."
    ::= { tmnxOamLTtraceFecInfoEntry 5 }

tmnxOamLTtraceFecDisPaths        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecDisPaths indicates the number of
         discovered ECMP paths for the Address FEC."
    ::= { tmnxOamLTtraceFecInfoEntry 6 }

tmnxOamLTtraceFecFailedHops      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecFailedHops indicates the number of hops
         from which no successful response was received."
    ::= { tmnxOamLTtraceFecInfoEntry 7 }

tmnxOamLTtraceFecLastDisEnd      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecLastDisEnd indicates the sysUpTime when
         the FEC was last discovered."
    ::= { tmnxOamLTtraceFecInfoEntry 8 }

tmnxOamLTtraceFecFailedProbes    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecFailedProbes indicates the number of
         discovered paths which are in failed probing state."
    ::= { tmnxOamLTtraceFecInfoEntry 9 }

tmnxOamLTtraceFecProbeState      OBJECT-TYPE
    SYNTAX      INTEGER {
        oK              (0),
        partiallyFailed (1),
        failed          (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecProbeState indicates the current overall
         probing state for the discovered paths of the Address FEC. The
         tmnxOamLTtraceFecProbeState is considered as 'oK' when probing on all
         the associated discovered paths is OK. It is considered as 'failed'
         when probing on all the associated discovered paths failed. It is
         considered as partially failed when probing on one or more, but not
         all, discovered paths failed."
    ::= { tmnxOamLTtraceFecInfoEntry 10 }

tmnxOamLTtraceFecSendErrProbes   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtraceFecSendErrProbes indicates the number of
         discovered paths which are experiencing problems in sending probe
         (ping) requests."
    ::= { tmnxOamLTtraceFecInfoEntry 11 }

tmnxOamLTtracePathInfoTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLTtracePathInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtracePathInfoTable contains per-path information discovered
         by background LDP tree trace.

         Background LDP tree trace is configured using
         tmnxOamLTtraceAutoConfigTable."
    ::= { tmnxOamTraceRouteObjs 25 }

tmnxOamLTtracePathInfoEntry      OBJECT-TYPE
    SYNTAX      TmnxOamLTtracePathInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLTtracePathInfoEntry contains information about one path
         discovered by background LDP tree trace.

         Rows are created and destroyed by SROS."
    INDEX       {
        vRtrID,
        tmnxOamLTtraceFecPrefixType,
        tmnxOamLTtraceFecPrefix,
        tmnxOamLTtraceFecPrefLen,
        tmnxOamLTtracePathDstAddrType,
        tmnxOamLTtracePathDstAddr
    }
    ::= { tmnxOamLTtracePathInfoTable 1 }

TmnxOamLTtracePathInfoEntry      ::= SEQUENCE
{
    tmnxOamLTtracePathDstAddrType    InetAddressType,
    tmnxOamLTtracePathDstAddr        InetAddress,
    tmnxOamLTtracePathRemAddrType    InetAddressType,
    tmnxOamLTtracePathRemoteAddr     InetAddress,
    tmnxOamLTtracePathEgrNhAddrType  InetAddressType,
    tmnxOamLTtracePathEgrNhAddr      InetAddress,
    tmnxOamLTtracePathDisTtl         Unsigned32,
    tmnxOamLTtracePathLastDisTime    TimeStamp,
    tmnxOamLTtracePathLastRc         TmnxOamPingRtnCode,
    tmnxOamLTtracePathProbeState     INTEGER,
    tmnxOamLTtracePathProbeTmOutCnt  Unsigned32,
    tmnxOamLTtracePathProbeSendErr   INTEGER
}

tmnxOamLTtracePathDstAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathDstAddrType specifies the type of
         Internet address stored in tmnxOamLTtracePathDstAddr."
    ::= { tmnxOamLTtracePathInfoEntry 1 }

tmnxOamLTtracePathDstAddr        OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathDstAddr specifies the destination IP
         address (127 Address) of a path for a given LDP based LSP associated
         with the OAM LDP Tree trace test."
    ::= { tmnxOamLTtracePathInfoEntry 2 }

tmnxOamLTtracePathRemAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathRemAddrType indicates the type of
         Internet address stored in tmnxOamLTtracePathRemoteAddr."
    ::= { tmnxOamLTtracePathInfoEntry 3 }

tmnxOamLTtracePathRemoteAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathRemoteAddr indicates the associated
         interface IP address or the router ID of the egress router."
    ::= { tmnxOamLTtracePathInfoEntry 4 }

tmnxOamLTtracePathEgrNhAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathEgrNhAddrType indicates the type of
         Internet address stored in tmnxOamLTtracePathEgrNhAddr."
    ::= { tmnxOamLTtracePathInfoEntry 5 }

tmnxOamLTtracePathEgrNhAddr      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathEgrNhAddr indicates the next hop IP
         address (wrt the ingress router) used to reach the associated ECMP
         path endpoint."
    ::= { tmnxOamLTtracePathInfoEntry 6 }

tmnxOamLTtracePathDisTtl         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathDisTtl indicates the label time-to-live
         value used to discover the egress router for the path."
    ::= { tmnxOamLTtracePathInfoEntry 7 }

tmnxOamLTtracePathLastDisTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathLastDisTime indicates the sysUpTime
         when the path was last discovered."
    ::= { tmnxOamLTtracePathInfoEntry 8 }

tmnxOamLTtracePathLastRc         OBJECT-TYPE
    SYNTAX      TmnxOamPingRtnCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathLastRc indicates the OAM return code
         received in the OAM ping response."
    ::= { tmnxOamLTtracePathInfoEntry 9 }

tmnxOamLTtracePathProbeState     OBJECT-TYPE
    SYNTAX      INTEGER {
        oK     (0),
        failed (1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathProbeState indicates the current
         probing (ping) state for the discovered ECMP path.

         tmnxOamLTtracePathProbeState is 'failed' when the number of
         consecutive timeouts for the ping request reached its maximum allowed
         limit (tmnxOamLTtraceAutoPrMaxFailures).

         tmnxOamLTtracePathProbeState is 'oK' after receiving a successful ping
         response for the associated path."
    ::= { tmnxOamLTtracePathInfoEntry 10 }

tmnxOamLTtracePathProbeTmOutCnt  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathProbeTmOutCnt indicates the number of
         consecutive timeouts for the associated ping request.

         tmnxOamLTtracePathProbeTmOutCnt is reset to zero after receiving a
         successful ping response from the path destination."
    ::= { tmnxOamLTtracePathInfoEntry 11 }

tmnxOamLTtracePathProbeSendErr   OBJECT-TYPE
    SYNTAX      INTEGER {
        oK     (0),
        failed (1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLTtracePathProbeSendErr indicates the state of the
         last path probe (ping) request.

         tmnxOamLTtracePathProbeSendErr is 'failed' if the last probe (ping)
         request could not be sent due to a local failure."
    ::= { tmnxOamLTtracePathInfoEntry 12 }

tmnxOamVccvTrCtlTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVccvTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row in tmnxOamVccvTrCtlTable contains the VCCV-specific
         configuration information needed to launch a VCCV (Virtual Circuit
         Connectivity Verification) trace route test.  The rest of the
         configuration information needed to launch the test resides in the
         corresponding row of tmnxOamTrCtlTable.

         Four types of VCCV trace route tests are supported:  AII Type 2,
         FEC-128 Pseudowire, Spoke SDP FEC, and Transport Profile Static.  AII
         Type 2 and Spoke SDP FEC offer two ways to specify a VCCV trace route
         FEC-129 Pseudowire test.

         In the Transport Profile Static case, the test type is configured
         (using tmnxOamVccvTrCtlTestSubMode).  In the other three cases, the
         test type is not configured (i.e. the default
         tmnxOamVccvTrCtlTestSubMode value 'unspecified(1)' is used).

         The following table has a row for each VCCV trace route test type,
         showing the mandatory and optional objects applicable to the test
         type. Abbreviated VCCV trace route test type names are used.

         Test
         Type   Mandatory Objects               Optional Objects
         ------ ------------------------------ ---------------------------------
         aiiTY2 tmnxOamVccvTrCtlSaiiAcId        tmnxOamVccvTrCtlReplyMode
                tmnxOamVccvTrCtlSaiiGlobalId
                tmnxOamVccvTrCtlSaiiPrefix
                tmnxOamVccvTrCtlTaiiAcId
                tmnxOamVccvTrCtlTaiiGlobalId
                tmnxOamVccvTrCtlTaiiPrefix

         FEC128 tmnxOamVccvTrCtlSdpIdVcId       tmnxOamVccvTrCtlReplyMode
                                               *tmnxOamVccvTrCtlSwitTgtFecType
                                               *tmnxOamVccvTrTgStaticCtlAgi
                                               *tmnxOamVccvTrTgStaticCtlSaiiGlbl
                                               *tmnxOamVccvTrTgStaticCtlSaiiNode
                                               *tmnxOamVccvTrTgStaticCtlSaiiAcId
                                               *tmnxOamVccvTrTgStaticCtlTaiiGlbl
                                               *tmnxOamVccvTrTgStaticCtlTaiiNode
                                               *tmnxOamVccvTrTgStaticCtlTaiiAcId


         sdpFEC tmnxOamVccvTrCtlSpokeSdpId     *tmnxOamVccvTrCtlSaiiAcId
                                               *tmnxOamVccvTrCtlSaiiGlobalId
                                               *tmnxOamVccvTrCtlSaiiPrefix
                                               *tmnxOamVccvTrCtlTaiiAcId
                                               *tmnxOamVccvTrCtlTaiiGlobalId
                                               *tmnxOamVccvTrCtlTaiiPrefix
                                                tmnxOamVccvTrCtlReplyMode

         TPST   tmnxOamVccvTrCtlSdpIdVcId      *tmnxOamTrCtlSrcAddrType
                tmnxOamVccvTrCtlTestSubMode    *tmnxOamTrCtlSrcAddress
                                                tmnxOamVccvTrCtlAssocChannel
                                               #tmnxOamVccvTrCtlSwitTgtFecType
                                               #tmnxOamVccvTrTgFec128CtlSrcAddrT
                                               #tmnxOamVccvTrTgFec128CtlSrcAddr
                                               #tmnxOamVccvTrTgFec128CtlDstAddrT
                                               #tmnxOamVccvTrTgFec128CtlDstAddr
                                               #tmnxOamVccvTrTgFec128CtlPwId
                                               #tmnxOamVccvTrTgFec128CtlPwType

         ALL    N/A                             tmnxOamTrCtlDataSize
                                                tmnxOamTrCtlFcName
                                                tmnxOamTrCtlInitialTtl
                                                tmnxOamTrCtlInterval
                                                tmnxOamTrCtlMaxFailures
                                                tmnxOamTrCtlMaxTtl
                                                tmnxOamTrCtlProbesPerHop
                                                tmnxOamTrCtlProfile
                                                tmnxOamTrCtlTimeOut
         ------ ------------------------------ ---------------------------------

         In the table above,
         1.  The optional objects in the ALL row apply to all four VCCV trace
             route test types.
         2.  The characters '*' and '#' each mark an independent set of optional
             objects which must all be specified, or must all be unspecified.

         When an object combination other than a combination listed above is
         specified, values will be rejected or ignored, or the test will fail."
    REFERENCE
        "RFC 5085:  Pseudowire Virtual Circuit Connectivity Verification (VCCV):
         A Control Channel for Pseudowires"
    ::= { tmnxOamTraceRouteObjs 26 }

tmnxOamVccvTrCtlEntry            OBJECT-TYPE
    SYNTAX      TmnxOamVccvTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The system creates a row in tmnxOamVccvTrCtlTable when
         tmnxOamTrCtlTestMode is set to 'vccvTraceRoute'.

         The system destroys a row in tmnxOamVccvTrCtlTable when the
         corresponding row in tmnxOamTrCtlTable is destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamVccvTrCtlTable 1 }

TmnxOamVccvTrCtlEntry            ::= SEQUENCE
{
    tmnxOamVccvTrCtlSdpIdVcId        SdpBindId,
    tmnxOamVccvTrCtlReplyMode        INTEGER,
    tmnxOamVccvTrCtlSpokeSdpId       TmnxSpokeSdpIdOrZero,
    tmnxOamVccvTrCtlSaiiGlobalId     TmnxPwGlobalIdOrZero,
    tmnxOamVccvTrCtlSaiiPrefix       Unsigned32,
    tmnxOamVccvTrCtlSaiiAcId         Unsigned32,
    tmnxOamVccvTrCtlTaiiGlobalId     TmnxPwGlobalIdOrZero,
    tmnxOamVccvTrCtlTaiiPrefix       Unsigned32,
    tmnxOamVccvTrCtlTaiiAcId         Unsigned32,
    tmnxOamVccvTrCtlTestSubMode      TmnxOamVccvTestSubMode,
    tmnxOamVccvTrCtlAssocChannel     TmnxOamVccvAssocChannel,
    tmnxOamVccvTrCtlSwitTgtFecType   TmnxOamVccvSwitTgtFecType
}

tmnxOamVccvTrCtlSdpIdVcId        OBJECT-TYPE
    SYNTAX      SdpBindId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlSdpIdVcId specifies the SDP binding of
         the pseudowire to be tested by a VCCV trace route test.

         The all-zeros value indicates an unused SDP binding.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    DEFVAL      { '0000000000000000'h }
    ::= { tmnxOamVccvTrCtlEntry 1 }

tmnxOamVccvTrCtlReplyMode        OBJECT-TYPE
    SYNTAX      INTEGER {
        ip             (2),
        controlChannel (4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlReplyMode specifies the band to be used by
         the echo reply.
             ip (2)                 out-of-band reply
             controlChannel (4)     inband reply

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3 ('Packet Format')."
    DEFVAL      { controlChannel }
    ::= { tmnxOamVccvTrCtlEntry 2 }

tmnxOamVccvTrCtlSpokeSdpId       OBJECT-TYPE
    SYNTAX      TmnxSpokeSdpIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlSpokeSdpId specifies the spoke SDP
         identifier to be used when performing a VCCV trace route test on a FEC
         129 pseudowire.

         A value of zero indicates that no spoke SDP identifier has been
         configured.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrCtlEntry 3 }

tmnxOamVccvTrCtlSaiiGlobalId     OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlSaiiGlobalId specifies the global
         identifier of the Source Attachment Individual Identifier (SAII) to be
         used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no global identifier has been
         configured.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrCtlEntry 4 }

tmnxOamVccvTrCtlSaiiPrefix       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlSaiiPrefix specifies the prefix of the
         Source Attachment Individual Identifier (SAII) to be used when testing
         a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no prefix has been configured.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrCtlEntry 5 }

tmnxOamVccvTrCtlSaiiAcId         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlSaiiAcId specifies the attachment circuit
         identifier of the Source Attachment Individual Identifier (SAII) to be
         used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no attachment circuit identifier has
         been configured.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrCtlEntry 6 }

tmnxOamVccvTrCtlTaiiGlobalId     OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlTaiiGlobalId specifies the global
         identifier of the Target Attachment Individual Identifier (TAII) to be
         used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no global identifier has been
         configured.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrCtlEntry 7 }

tmnxOamVccvTrCtlTaiiPrefix       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlTaiiPrefix specifies the prefix of the
         Target Attachment Individual Identifier (TAII) to be used when testing
         a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no prefix has been configured.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrCtlEntry 8 }

tmnxOamVccvTrCtlTaiiAcId         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlTaiiAcId specifies the attachment circuit
         identifier of the Target Attachment Individual Identifier (TAII) to be
         used when testing a FEC 129 AII Type 2 pseudowire.

         A value of zero indicates that no attachment circuit identifier has
         been configured.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    REFERENCE
        "RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', Section 3.2, 'AII Type 2'"
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrCtlEntry 9 }

tmnxOamVccvTrCtlTestSubMode      OBJECT-TYPE
    SYNTAX      TmnxOamVccvTestSubMode
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlTestSubMode specifies the type of VCCV
         trace route test to perform.

         When this object is 'unspecified(1)', the type of VCCV trace route
         test to be performed is determined when the test is started, from the
         set of tmnxOamVccvTrCtlTable objects configured with non-default
         values.

         If there is a mismatch between tmnxOamVccvTrCtlTestSubMode and the type
         of the pseudowire to be tested, the test will fail.  For example, if
         tmnxOamVccvTrCtlTestSubMode is 'static(2)', and there is no
         TIMETRA-SDP-MIB::sdpBindPwPathTable row for the test's SDP binding,
         the test will fail.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    DEFVAL      { unspecified }
    ::= { tmnxOamVccvTrCtlEntry 10 }

tmnxOamVccvTrCtlAssocChannel     OBJECT-TYPE
    SYNTAX      TmnxOamVccvAssocChannel
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlAssocChannel specifies the launched echo
         request's usage of the Associated Channel (ACH) mechanism, when
         performing an MPLS-TP VCCV trace route test.

         When tmnxOamVccvTrCtlTestSubMode is 'static(2)', the default value for
         tmnxOamVccvTrCtlAssocChannel is 'nonIp(2)'.

         The supported object combinations for VCCV trace route tests are
         listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause."
    DEFVAL      { notApplicable }
    ::= { tmnxOamVccvTrCtlEntry 11 }

tmnxOamVccvTrCtlSwitTgtFecType   OBJECT-TYPE
    SYNTAX      TmnxOamVccvSwitTgtFecType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrCtlSwitTgtFecType specifies the type of
         downstream FEC (Forward Equivalence Class) segment to be tested.

         This object must be set to a non-default value when the path to be
         tested starts with a FEC segment, and switches to a FEC segment with a
         different type.  For example, if the path to be tested starts with a
         static FEC, and switches to FEC 128, this object must be set to
         'fec128(2)'."
    DEFVAL      { none }
    ::= { tmnxOamVccvTrCtlEntry 12 }

tmnxOamVccvTrNextPwSegmentTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVccvTrNextPwSegmentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'vccvTraceRoute'
         probe operation where a VCCV next hop list is returned.

         An entry in this table is created when the result of an OAM
         'vccvTraceRoute' probe is determined.

         An entry is removed from this table when its corresponding
         tmnxOamTrProbeHistoryEntry is deleted."
    ::= { tmnxOamTraceRouteObjs 27 }

tmnxOamVccvTrNextPwSegmentEntry  OBJECT-TYPE
    SYNTAX      TmnxOamVccvTrNextPwSegmentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamVccvTrNextPwSegmentTable. The first two
         index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamVccvTrNextPwSegmentEntry belongs to.  The third index element
         identifies an OAM trace route test run.  The fourth, fifth and sixth
         index elements select a single OAM 'vccvTraceRoute' reply."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex
    }
    ::= { tmnxOamVccvTrNextPwSegmentTable 1 }

TmnxOamVccvTrNextPwSegmentEntry  ::= SEQUENCE
{
    tmnxOamVccvTrNextPwID            TmnxVcIdOrNone,
    tmnxOamVccvTrNextPwType          SdpBindVcType,
    tmnxOamVccvTrNextSenderAddrType  InetAddressType,
    tmnxOamVccvTrNextSenderAddr      InetAddress,
    tmnxOamVccvTrNextRemoteAddrType  InetAddressType,
    tmnxOamVccvTrNextRemoteAddr      InetAddress,
    tmnxOamVccvTrNextSaiiGlobalId    TmnxPwGlobalIdOrZero,
    tmnxOamVccvTrNextSaiiPrefix      Unsigned32,
    tmnxOamVccvTrNextSaiiAcId        Unsigned32,
    tmnxOamVccvTrNextTaiiGlobalId    TmnxPwGlobalIdOrZero,
    tmnxOamVccvTrNextTaiiPrefix      Unsigned32,
    tmnxOamVccvTrNextTaiiAcId        Unsigned32,
    tmnxOamVccvTrNextTpAgi           OCTET STRING,
    tmnxOamVccvTrNextTpSaiiGlobalId  TmnxMplsTpGlobalID,
    tmnxOamVccvTrNextTpSaiiNodeId    TmnxMplsTpNodeID,
    tmnxOamVccvTrNextTpSaiiAcId      Unsigned32,
    tmnxOamVccvTrNextTpTaiiGlobalId  TmnxMplsTpGlobalID,
    tmnxOamVccvTrNextTpTaiiNodeId    TmnxMplsTpNodeID,
    tmnxOamVccvTrNextTpTaiiAcId      Unsigned32
}

tmnxOamVccvTrNextPwID            OBJECT-TYPE
    SYNTAX      TmnxVcIdOrNone
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextPwID indicates the next-hop pseudo-wire
         in the trace route operation for a specific 'vccvTraceRoute' probe
         reply. A value of '0' indicates that there are no further next-hops
         for a specific trace route operation."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 1 }

tmnxOamVccvTrNextPwType          OBJECT-TYPE
    SYNTAX      SdpBindVcType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextPwType indicates the next-hop
         pseudo-wire type in the trace route operation for a specific
         'vccvTraceRoute' probe reply."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 2 }

tmnxOamVccvTrNextSenderAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextSenderAddrType indicates the next-hop
         sender IP address type in the trace route operation for a specific
         'vccvTraceRoute' probe reply."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 3 }

tmnxOamVccvTrNextSenderAddr      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextSenderAddr indicates the next-hop sender
         IP address in the trace route operation for a specific
         'vccvTraceRoute' probe reply."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 4 }

tmnxOamVccvTrNextRemoteAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextRemoteAddrType indicates the next-hop
         remote IP address type in the trace route operation for a specific
         'vccvTraceRoute' probe reply."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 5 }

tmnxOamVccvTrNextRemoteAddr      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextRemoteAddr indicates the next-hop remote
         IP address in the trace route operation for a specific
         'vccvTraceRoute' probe reply."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 6 }

tmnxOamVccvTrNextSaiiGlobalId    OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextSaiiGlobalId indicates the global
         identifier of the Source Attachment Individual Identifier (SAII) of a
         specific 'vccvTraceRoute' probe reply.

         A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
         probed.  Otherwise, zero is returned."
    REFERENCE
        "RFC 5003 Section 3.2"
    ::= { tmnxOamVccvTrNextPwSegmentEntry 7 }

tmnxOamVccvTrNextSaiiPrefix      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextSaiiPrefix indicates the prefix of the
         Source Attachment Individual Identifier (SAII) of a specific
         'vccvTraceRoute' probe reply.

         A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
         probed.  Otherwise, zero is returned."
    REFERENCE
        "RFC 5003 Section 3.2"
    ::= { tmnxOamVccvTrNextPwSegmentEntry 8 }

tmnxOamVccvTrNextSaiiAcId        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextSaiiAcId indicates the attachment
         circuit identifier of the Source Attachment Individual Identifier
         (SAII) of a specific 'vccvTraceRoute' probe reply.

         A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
         probed.  Otherwise, zero is returned."
    REFERENCE
        "RFC 5003 Section 3.2"
    ::= { tmnxOamVccvTrNextPwSegmentEntry 9 }

tmnxOamVccvTrNextTaiiGlobalId    OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTaiiGlobalId indicates the global
         identifier of the Target Attachment Individual Identifier (TAII) of a
         specific 'vccvTraceRoute' probe reply.

         A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
         probed.  Otherwise, zero is returned."
    REFERENCE
        "RFC 5003 Section 3.2"
    ::= { tmnxOamVccvTrNextPwSegmentEntry 10 }

tmnxOamVccvTrNextTaiiPrefix      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTaiiPrefix indicates the prefix of the
         Target Attachment Individual Identifier (TAII) of a specific
         'vccvTraceRoute' probe reply.

         A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
         probed.  Otherwise, zero is returned."
    REFERENCE
        "RFC 5003 Section 3.2"
    ::= { tmnxOamVccvTrNextPwSegmentEntry 11 }

tmnxOamVccvTrNextTaiiAcId        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTaiiAcId indicates the attachment
         circuit identifier of the Target Attachment Individual Identifier
         (TAII) of a specific 'vccvTraceRoute' probe reply.

         A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
         probed.  Otherwise, zero is returned."
    REFERENCE
        "RFC 5003 Section 3.2"
    ::= { tmnxOamVccvTrNextPwSegmentEntry 12 }

tmnxOamVccvTrNextTpAgi           OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTpAgi indicates the Service Identifier
         field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU.

         If a pseudowire other than an MPLS-TP pseudowire was probed, the
         all-zeros value is returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 13 }

tmnxOamVccvTrNextTpSaiiGlobalId  OBJECT-TYPE
    SYNTAX      TmnxMplsTpGlobalID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTpSaiiGlobalId indicates the Source
         Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply
         PDU.

         If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
         returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 14 }

tmnxOamVccvTrNextTpSaiiNodeId    OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTpSaiiNodeId indicates the Source Node
         ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU.

         If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
         returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 15 }

tmnxOamVccvTrNextTpSaiiAcId      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTpSaiiAcId indicates the Source
         Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV
         of the reply PDU.

         If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
         returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 16 }

tmnxOamVccvTrNextTpTaiiGlobalId  OBJECT-TYPE
    SYNTAX      TmnxMplsTpGlobalID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTpTaiiGlobalId indicates the Destination
         Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply
         PDU.

         If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
         returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 17 }

tmnxOamVccvTrNextTpTaiiNodeId    OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTpTaiiNodeId indicates the Destination
         Node ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply
         PDU.

         If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
         returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 18 }

tmnxOamVccvTrNextTpTaiiAcId      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrNextTpTaiiAcId indicates the Destination
         Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV
         of the reply PDU.

         If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
         returned."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamVccvTrNextPwSegmentEntry 19 }

tmnxOamP2mpLspTrCtlTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamP2mpLspTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamP2mpLspTrCtlTable contains configuration information for
         'p2mpLspTrace' tests."
    ::= { tmnxOamTraceRouteObjs 28 }

tmnxOamP2mpLspTrCtlEntry         OBJECT-TYPE
    SYNTAX      TmnxOamP2mpLspTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamP2mpLspTrCtlEntry contains configuration information for one
         'p2mpLspTrace' test.

         SROS creates a row when tmnxOamTrCtlTestMode is set to 'p2mpLspTrace'.

         SROS destroys a row when the corresponding tmnxOamTrCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamP2mpLspTrCtlTable 1 }

TmnxOamP2mpLspTrCtlEntry         ::= SEQUENCE
{
    tmnxOamP2mpLspTrCtlLspName       TLNamedItemOrEmpty,
    tmnxOamP2mpLspTrCtlInstName      TNamedItemOrEmpty,
    tmnxOamP2mpLspTrCtlLeafIpAddr    InetAddress,
    tmnxOamP2mpLspTrCtlLeafIpAddrType InetAddressType
}

tmnxOamP2mpLspTrCtlLspName       OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Administrative name of the target P2MP Labeled Switch Path (LSP) for
         this OAM P2MP LSP Trace test. This parameter is mandatory."
    DEFVAL      { ''H }
    ::= { tmnxOamP2mpLspTrCtlEntry 1 }

tmnxOamP2mpLspTrCtlInstName      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This parameter identifies an instance of a P2MP LSP, either a primary
         or secondary instance of a P2MP LSP Tree."
    DEFVAL      { ''H }
    ::= { tmnxOamP2mpLspTrCtlEntry 2 }

tmnxOamP2mpLspTrCtlLeafIpAddr    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrCtlLeafIpAddr specifies the Internet
         address of the egress leaf node of a P2MP LSP Tree. This parameter is
         mandatory."
    DEFVAL      { ''H }
    ::= { tmnxOamP2mpLspTrCtlEntry 3 }

tmnxOamP2mpLspTrCtlLeafIpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrCtlLeafIpAddrType specifies the type of
         Internet address stored in tmnxOamP2mpLspTrCtlLeafIpAddr."
    DEFVAL      { unknown }
    ::= { tmnxOamP2mpLspTrCtlEntry 4 }

tmnxOamP2mpLspTrMapTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamP2mpLspTrMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'p2mpLspTrace'
         probe operation when a Downstream Mapping TLV was returned.  Each row
         represents a single label map within the returned downstream mapping
         TLV.

         An entry in this table is created when the result of an OAM
         'p2mpLspTrace' probe is determined.

         Entries are removed from this table when the corresponding
         tmnxOamTrProbeHistoryEntry is deleted."
    REFERENCE
        "RFC 4379 Section 3.3"
    ::= { tmnxOamTraceRouteObjs 29 }

tmnxOamP2mpLspTrMapEntry         OBJECT-TYPE
    SYNTAX      TmnxOamP2mpLspTrMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamP2mpLspTrMapTable.  The first two
         index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamP2mpLspTrMapEntry belongs to.  The third index element
         identifies an OAM trace route test run.  The fourth index element
         selects the group of responses associated with a specific
         probe attempt. The fifth and sixth indexes select the hop and
         the probe at that hop for a particular Nokia SROS OAM
         Trace Route operation. The seventh index selects a single downstream
         L2 map entry within the specific probe reply."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamP2mpLspTrMapIndex
    }
    ::= { tmnxOamP2mpLspTrMapTable 1 }

TmnxOamP2mpLspTrMapEntry         ::= SEQUENCE
{
    tmnxOamP2mpLspTrMapIndex         Unsigned32,
    tmnxOamP2mpLspTrMapDSIPv4Addr    IpAddress,
    tmnxOamP2mpLspTrMapAddrType      TmnxOamAddressType,
    tmnxOamP2mpLspTrMapDSIfAddr      Unsigned32,
    tmnxOamP2mpLspTrMapMTU           Unsigned32,
    tmnxOamP2mpLspTrMapP2mpBranch    TruthValue,
    tmnxOamP2mpLspTrMapP2mpBud       TruthValue
}

tmnxOamP2mpLspTrMapIndex         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrMapIndex specifies a single L2 mapping
         entry within a specific 'p2mpLspTrace' probe reply.

         The agent starts assigning tmnxOamP2mpLspTrMapIndex values at 1."
    ::= { tmnxOamP2mpLspTrMapEntry 1 }

tmnxOamP2mpLspTrMapDSIPv4Addr    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrMapDSIPv4Addr indicates the IPv4 address
         of the downstream LSR that this entry in the tmnxOamP2mpLspTrMapTable
         describes.  If the interface to the downstream LSR is numbered,
         then the tmnxOamP2mpLspTrMapDSIPv4Addr can either be the downstream
         LSR's Router ID or the interface address of the downstream LSR.

         If the interface to the downstream LSR is unnumbered, the value of
         tmnxOamP2mpLspTrMapDSIPv4Addr indicates the downstream LSR's Router
         ID."
    ::= { tmnxOamP2mpLspTrMapEntry 2 }

tmnxOamP2mpLspTrMapAddrType      OBJECT-TYPE
    SYNTAX      TmnxOamAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrMapAddrType indicates the type of
         downstream interface address specified by tmnxOamP2mpLspTrMapDSIfAddr.
         The only valid values for tmnxOamP2mpLspTrMapAddrType are
         'ipv4Address', 'ipv4Unnumbered', 'ipv6Address' and 'ipv6Unnumbered'."
    ::= { tmnxOamP2mpLspTrMapEntry 3 }

tmnxOamP2mpLspTrMapDSIfAddr      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When tmnxOamP2mpLspTrMapAddrType has a value of 'ipv4Address'
         tmnxOamP2mpLspTrMapDSIfAddr indicates the downstream LSR's
         interface address.  When tmnxOamP2mpLspTrMapAddrType has a value
         of 'unnumbered', tmnxOamP2mpLspTrMapDSIfAddr indicates the index
         assigned by the upstream LSR to the interface."
    ::= { tmnxOamP2mpLspTrMapEntry 4 }

tmnxOamP2mpLspTrMapMTU           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrMapMTU indicates the largest MPLS frame
         (including the label stack) that fits on the interface to the
         downstream LSR."
    ::= { tmnxOamP2mpLspTrMapEntry 5 }

tmnxOamP2mpLspTrMapP2mpBranch    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamP2mpLspTrMapP2mpBranch is 'true', the
         'p2mpLspTrace' response indicates that the responding router is a
         branch node of the P2MP LSP tree."
    ::= { tmnxOamP2mpLspTrMapEntry 6 }

tmnxOamP2mpLspTrMapP2mpBud       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When the value of tmnxOamP2mpLspTrMapP2mpBud is 'true', the
         'p2mpLspTrace' response indicates that the responding router is a bud
         node of the P2MP LSP tree."
    ::= { tmnxOamP2mpLspTrMapEntry 7 }

tmnxOamP2mpLspTrDSLabelTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamP2mpLspTrDSLabelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a table for storing the results of an OAM 'p2mpLspTrace'
         probe operation when a Downstream Mapping TLV was
         returned.  Each row represents a single downstream label within a
         returned downstream L2 mapping TLV.

         An entry in this table is created when the result of an OAM
         'p2mpLspTrace' probe is determined.

         Entries are removed from this table when the corresponding
         tmnxOamP2mpLspTrMapEntry is deleted."
    ::= { tmnxOamTraceRouteObjs 30 }

tmnxOamP2mpLspTrDSLabelEntry     OBJECT-TYPE
    SYNTAX      TmnxOamP2mpLspTrDSLabelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamP2mpLspTrDSLabelTable.  The first
         two index elements identify the tmnxOamTrCtlEntry that a
         tmnxOamLspTrMapEntry belongs to.  The third index element
         identifies a OAM trace route test run. The fourth index element
         selects the group of responses associated with a specific
         probe attempt. The fifth and sixth indexes select the hop and
         the probe at that hop for a particular Nokia SROS OAM
         Trace Route operation. The seventh index selects a single downstream
         L2 map entry within the specific probe reply.  The eighth index
         selects successive downstream L2 label entries contained in a
         specific probe reply."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamLspTrMapIndex,
        tmnxOamP2mpLspTrDSLabelIndex
    }
    ::= { tmnxOamP2mpLspTrDSLabelTable 1 }

TmnxOamP2mpLspTrDSLabelEntry     ::= SEQUENCE
{
    tmnxOamP2mpLspTrDSLabelIndex     Unsigned32,
    tmnxOamP2mpLspTrDSLabelLabel     MplsLabel,
    tmnxOamP2mpLspTrDSLabelProtocol  TmnxOamSignalProtocol
}

tmnxOamP2mpLspTrDSLabelIndex     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamP2mpLspTrDSLabelIndex selects a single downstream L2 label
         entry within a specific L2 mapping entry reply.

         The agent starts assigning tmnxOamP2mpLspTrDSLabelIndex values at 1."
    ::= { tmnxOamP2mpLspTrDSLabelEntry 1 }

tmnxOamP2mpLspTrDSLabelLabel     OBJECT-TYPE
    SYNTAX      MplsLabel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrDSLabelLabel is the label used by the
         downstream router specified by this downstream L2 label entry."
    ::= { tmnxOamP2mpLspTrDSLabelEntry 2 }

tmnxOamP2mpLspTrDSLabelProtocol  OBJECT-TYPE
    SYNTAX      TmnxOamSignalProtocol
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamP2mpLspTrDSLabelProtocol is the signaling protocol
         used by the router for the label specified by this downstream L2 label
         entry."
    ::= { tmnxOamP2mpLspTrDSLabelEntry 3 }

tmnxOamEthCfmTrCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamEthCfmTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamEthCfmTrCtlTable contains Ethernet CFM-specific configuration
         information for 'ethCfmLinkTrace' tests.

         This table extends the tmnxOamTrCtlTable.  A row is automatically
         created in this table when tmnxOamTrCtlTestMode is set to 'ethCfmLinkTrace'.

         Destroying a row in tmnxOamTrCtlTable automatically destroys the row
         (if any) with the same index values in tmnxOamEthCfmTrCtlTable."
    ::= { tmnxOamTraceRouteObjs 31 }

tmnxOamEthCfmTrCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamEthCfmTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamEthCfmTrCtlEntry defines an entry in the
         tmnxOamEthCfmTrCtlTable.  Each index is an object in
         tmnxOamTrCtlTable."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamEthCfmTrCtlTable 1 }

TmnxOamEthCfmTrCtlEntry          ::= SEQUENCE
{
    tmnxOamEthCfmTrCtlTgtMacAddr     MacAddress,
    tmnxOamEthCfmTrCtlSrcMdIndex     Unsigned32,
    tmnxOamEthCfmTrCtlSrcMaIndex     Unsigned32,
    tmnxOamEthCfmTrCtlSrcMepId       Dot1agCfmMepIdOrZero,
    tmnxOamEthCfmTrCtlRemoteMepId    Dot1agCfmMepIdOrZero
}

tmnxOamEthCfmTrCtlTgtMacAddr     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrCtlTgtMacAddr specifies the destination
         MAC address for the test.

         A non-zero unicast destination MAC address is required in each test frame
         sent for the test.  The destination MAC address can be specified directly
         (using this object) or indirectly (see the DESCRIPTION of
         tmnxOamEthCfmTrCtlRemoteMepId).

         Exactly one of tmnxOamEthCfmTrCtlTgtMacAddr and
         tmnxOamEthCfmTrCtlRemoteMepId must be assigned a non-default value.
         Otherwise, an attempt to administratively enable the test (using
         tmnxOamSaaCtlAdminStatus) will fail."
    DEFVAL      { '000000000000'H }
    ::= { tmnxOamEthCfmTrCtlEntry 1 }

tmnxOamEthCfmTrCtlSrcMdIndex     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrCtlSrcMdIndex specifies the source CFM
         maintenance domain index for the test.  Zero is the null CFM
         maintenance domain index."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmTrCtlEntry 2 }

tmnxOamEthCfmTrCtlSrcMaIndex     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrCtlSrcMaIndex specifies the source CFM
         maintenance association index for the test.  Zero is the null CFM
         maintenance association index."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmTrCtlEntry 3 }

tmnxOamEthCfmTrCtlSrcMepId       OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrCtlSrcMepId specifies the source
         Maintenance association End Point Identifier (MEP ID) for the test.
         Zero is the null MEP ID."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmTrCtlEntry 4 }

tmnxOamEthCfmTrCtlRemoteMepId    OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrCtlRemoteMepId specifies the remote
         Maintenance association End Point Identifier (MEP ID) for the test.

         A non-zero unicast destination MAC address is required in each test frame
         sent for the test.  The destination MAC address can be specified directly
         (using tmnxOamEthCfmTrCtlTgtMacAddr) or indirectly (using this object).

         Exactly one of tmnxOamEthCfmTrCtlTgtMacAddr and
         tmnxOamEthCfmTrCtlRemoteMepId must be assigned a non-default value.
         Otherwise, an attempt to administratively enable the test (using
         tmnxOamSaaCtlAdminStatus) will fail.

         Suppose this object is assigned a non-default value.  Then, at the
         start of each test run, SROS reads
         TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the
         destination MAC address to use for the test run.

         The following index values are used for the read:
            tmnxOamEthCfmTrCtlSrcMdIndex,
            tmnxOamEthCfmTrCtlSrcMaIndex,
            tmnxOamEthCfmTrCtlSrcMepId,
            tmnxOamEthCfmTrCtlRemoteMepId.

         If the search fails to find a destination MAC address, no test frames
         will be sent for the test run.  The number of frames to be sent during
         a test run is configured using tmnxOamTrCtlProbesPerHop,
         tmnxOamTrCtlInitialTtl, and tmnxOamTrCtlMaxTtl.

         Configuring tmnxOamEthCfmTrCtlRemoteMepId (instead of
         tmnxOamEthCfmTrCtlDestMacAddr) has the following advantage: if the
         hardware hosting the test's far end is replaced (meaning a new
         destination MAC address is present), the test does not need to be
         reconfigured."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmTrCtlEntry 5 }

tmnxOamEthCfmTrPrHistTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamEthCfmTrPrHistEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamEthCfmTrPrHistTable contains Ethernet CFM-specific probe
         history for 'ethCfmLinkTrace' tests.

         This table extends the tmnxOamTrProbeHistoryTable.  A row is
         automatically created in this table when a row is created in
         tmnxOamTrProbeHistoryTable for a test with tmnxOamTrCtlTestMode set to
         'ethCfmLinkTrace'.  Deleting a row in tmnxOamTrProbeHistoryTable
         automatically deletes the row (if any) with the same index values in
         tmnxOamEthCfmTrPrHistTable."
    ::= { tmnxOamTraceRouteObjs 32 }

tmnxOamEthCfmTrPrHistEntry       OBJECT-TYPE
    SYNTAX      TmnxOamEthCfmTrPrHistEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the tmnxOamEthCfmTrPrHistTable.  The indices are
         the same as the tmnxOamTrProbeHistoryTable indices."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex
    }
    ::= { tmnxOamEthCfmTrPrHistTable 1 }

TmnxOamEthCfmTrPrHistEntry       ::= SEQUENCE
{
    tmnxOamEthCfmTrPrHistIngressMac  MacAddress,
    tmnxOamEthCfmTrPrHistEgressMac   MacAddress,
    tmnxOamEthCfmTrPrHistRelayAction INTEGER,
    tmnxOamEthCfmTrPrHistForwarded   TruthValue,
    tmnxOamEthCfmTrPrHistTerminalMep TruthValue
}

tmnxOamEthCfmTrPrHistIngressMac  OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrPrHistIngressMac indicates the ingress MAC
         address of the probe."
    ::= { tmnxOamEthCfmTrPrHistEntry 1 }

tmnxOamEthCfmTrPrHistEgressMac   OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrPrHistEgressMac indicates the egress MAC
         address of the probe."
    ::= { tmnxOamEthCfmTrPrHistEntry 2 }

tmnxOamEthCfmTrPrHistRelayAction OBJECT-TYPE
    SYNTAX      INTEGER {
        unknown (0),
        rlyHit  (1),
        rlyFdb  (2),
        rlyMpdb (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrPrHistRelayAction indicates the value of
         the Relay Action field in the Link Trace Reply.  'unknown(0)' is
         returned when a Link Trace Reply has not arrived, or the Relay Action
         field in the Link Trace Reply is outside the expected range."
    ::= { tmnxOamEthCfmTrPrHistEntry 3 }

tmnxOamEthCfmTrPrHistForwarded   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrPrHistForwarded indicates if a Link Trace
         Message was forwarded by the responding Maintenance Point (MP), as
         returned in the 'FwdYes' flag of the Flags field of the Link Trace
         Reply."
    REFERENCE
        "Modeled on the dot1agCfmLtrForwarded object in IEEE8021-CFM-MIB."
    ::= { tmnxOamEthCfmTrPrHistEntry 4 }

tmnxOamEthCfmTrPrHistTerminalMep OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmTrPrHistTerminalMep indicates whether the
         forwarded Link Trace Message reached a MEP enclosing its MA, as
         returned in the Terminal MEP flag of the Flags field of the Link Trace
         Reply."
    REFERENCE
        "Modeled on the dot1agCfmLtrTerminalMep object in IEEE8021-CFM-MIB."
    ::= { tmnxOamEthCfmTrPrHistEntry 5 }

tmnxOamLspTrFecStackTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLspTrFecStackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLspTrFecStackTable has a row for each RFC 6424 FEC (Forwarding
         Equivalence Class) Stack Change sub-TLV present in a currently managed
         'lspTraceRoute' reply PDU.

         The FEC Stack Change sub-TLV is a component of the RFC 6424 Downstream
         Detailed Mapping TLV.

         An 'lspTraceRoute' reply PDU can contain several Downstream Detailed
         Mapping TLVs.  A Downstream Detailed Mapping TLV can contain several
         FEC Stack Change sub-TLVs.

         The set of tmnxOamLspTrFecStackTable rows for a reply PDU holds the
         set of FEC stack changes recorded in the reply PDU, including
         information about MPLS tunnels and/or LSP stitching on the tested LSP."
    REFERENCE
        "RFC 6424, 'Mechanism for Performing Label Switched Path Ping (LSP Ping)
         over MPLS Tunnels', Section 3.3, 'Downstream Detailed Mapping TLV'.
         RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2, 'Target FEC Stack'."
    ::= { tmnxOamTraceRouteObjs 33 }

tmnxOamLspTrFecStackEntry        OBJECT-TYPE
    SYNTAX      TmnxOamLspTrFecStackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in tmnxOamLspTrFecStackTable is created by the system for each
         RFC 6424 FEC Stack Change sub-TLV present in a currently managed
         'lspTraceRoute' reply PDU.

         A row is deleted when the corresponding tmnxOamLspTrMapTable row is
         deleted.

         The first six indices specify an 'lspTraceRoute' reply PDU.

         The first seven indices specify an RFC 6424 Downstream Detailed
         Mapping TLV within an 'lspTraceRoute' reply PDU.

         The eight indices specify an RFC 6424 FEC Stack Change sub-TLV within
         a Downstream Detailed Mapping TLV within an 'lspTraceRoute' reply PDU."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamLspTrMapIndex,
        tmnxOamLspTrFecStackFecIndex
    }
    ::= { tmnxOamLspTrFecStackTable 1 }

TmnxOamLspTrFecStackEntry        ::= SEQUENCE
{
    tmnxOamLspTrFecStackFecIndex     Unsigned32,
    tmnxOamLspTrFecStackOperType     INTEGER,
    tmnxOamLspTrFecStackFecSubType   TNamedItemOrEmpty,
    tmnxOamLspTrFecStackPrefixType   InetAddressType,
    tmnxOamLspTrFecStackPrefix       InetAddress,
    tmnxOamLspTrFecStackPrefixLen    InetAddressPrefixLength,
    tmnxOamLspTrFecStackRemPeerAddrT InetAddressType,
    tmnxOamLspTrFecStackRemPeerAddr  InetAddress
}

tmnxOamLspTrFecStackFecIndex     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..8)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackFecIndex specifies one RFC 6424 FEC
         Stack Change sub-TLV within the specified Downstream Detailed Mapping
         TLV."
    ::= { tmnxOamLspTrFecStackEntry 1 }

tmnxOamLspTrFecStackOperType     OBJECT-TYPE
    SYNTAX      INTEGER {
        push (1),
        pop  (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackOperType indicates the value of the
         following Operation Type field (where +-> indicates encapsulation):
             'lspTraceRoute' reply PDU
             +-> RFC 6424 Downstream Detailed Mapping TLV
                 +-> RFC 6424 FEC Stack Change sub-TLV
                     +-> Operation Type field."
    ::= { tmnxOamLspTrFecStackEntry 2 }

tmnxOamLspTrFecStackFecSubType   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackFecSubType indicates the value of the
         following Subtype field (where +-> indicates encapsulation):
             'lspTraceRoute' reply PDU
             +-> RFC 6424 Downstream Detailed Mapping TLV
                 +-> RFC 6424 FEC Stack Change sub-TLV
                     +-> RFC 4379 Target FEC Stack TLV
                         +-> RFC 4379 FEC-type-specific sub-TLV
                             (e.g. BGP labeled IPv4 prefix sub-TLV)
                             +-> Subtype field.

         This object maps the numeric value in the Subtype field to an ASCII
         string.  The following examples illustrate the mapping.

         Subtype Field    tmnxOamLspTrFecStackFecSubType
         --------------   ------------------------------
         1                'LDP IPv4 prefix (1)'
         3                'RSVP IPv4 LSP (3)'
         12               'BGP labeled IPv4 prefix (12)'
         16               'Nil FEC (16)'
         99               'Unknown (99)'"
    ::= { tmnxOamLspTrFecStackEntry 3 }

tmnxOamLspTrFecStackPrefixType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackPrefixType indicates the type of
         address stored in tmnxOamLspTrFecStackPrefix."
    ::= { tmnxOamLspTrFecStackEntry 4 }

tmnxOamLspTrFecStackPrefix       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackPrefix indicates the value of an IP
         prefix (or IP address) field with the following encapsulation
         (where +-> indicates encapsulation):
             'lspTraceRoute' reply PDU
             +-> RFC 6424 Downstream Detailed Mapping TLV
                 +-> RFC 6424 FEC Stack Change sub-TLV
                     +-> RFC 4379 Target FEC Stack TLV
                         +-> RFC 4379 FEC-type-specific sub-TLV
                             (e.g. LDP IPv4 Prefix sub-TLV)
                             +-> FEC-type-specific IP prefix field.

         For example, the value returned could be the content of one of the
         fields shown in the following table.

         Field                RFC 4379 Sub-TLV
         ------------------   -----------------------
         Extended Tunnel ID   RSVP IPv4 LSP
         IPv4 Prefix          BGP Labeled IPv4 Prefix
         IPv4 Prefix          LDP IPv4 Prefix

         If no IP prefix field is present in the reply PDU,
         tmnxOamLspTrFecStackPrefixType contains 'unknown(1)'."
    ::= { tmnxOamLspTrFecStackEntry 5 }

tmnxOamLspTrFecStackPrefixLen    OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    UNITS       "bits"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackPrefixLen indicates the value of an IP
         prefix length field with the following encapsulation (where +->
         indicates encapsulation):
             'lspTraceRoute' reply PDU
             +-> RFC 6424 Downstream Detailed Mapping TLV
                 +-> RFC 6424 FEC Stack Change sub-TLV
                     +-> RFC 4379 Target FEC Stack TLV
                         +-> RFC 4379 FEC-type-specific sub-TLV
                             (e.g. LDP IPv4 Prefix sub-TLV)
                             +-> FEC-type-specific IP prefix length field.

         For example, the value returned could be the content of one of the
         fields shown in the following table.

         Field           RFC 4379 Sub-TLV
         -------------   -----------------------
         Prefix Length   BGP Labeled IPv4 Prefix
         Prefix Length   LDP IPv4 Prefix

         If no relevant IP prefix length field is present in the reply PDU,
         tmnxOamLspTrFecStackPrefixLen contains 32 (for an IPv4 address), or
         128 (for an IPv6 address)."
    ::= { tmnxOamLspTrFecStackEntry 6 }

tmnxOamLspTrFecStackRemPeerAddrT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackRemPeerAddrT indicates the type of
         address stored in tmnxOamLspTrFecStackRemPeerAddr."
    ::= { tmnxOamLspTrFecStackEntry 7 }

tmnxOamLspTrFecStackRemPeerAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLspTrFecStackRemPeerAddr indicates the value
         contained in the remote peer address field with the following
         encapsulation (where +-> indicates encapsulation):
             'lspTraceRoute' reply PDU
             +-> RFC 6424 Downstream Detailed Mapping TLV
                 +-> RFC 6424 FEC Stack Change sub-TLV
                     +-> Remote Peer Address field."
    ::= { tmnxOamLspTrFecStackEntry 8 }

tmnxOamVccvTrTgFec128CtlTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVccvTrTgFec128CtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvTrTgFec128CtlTable contains the target information for VCCV
         (Virtual Circuit Connectivity Verification) trace route tests which
         switch to downstream FEC (Forward Equivalence Class) 128 segments."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    ::= { tmnxOamTraceRouteObjs 34 }

tmnxOamVccvTrTgFec128CtlEntry    OBJECT-TYPE
    SYNTAX      TmnxOamVccvTrTgFec128CtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvTrTgFec128CtlEntry contains the target information for a
         VCCV trace route test which switches to a downstream FEC 128 segment.

         The values in a row are used to fill a 'FEC 128 Pseudowire' sub-TLV
         (Type, Length, Value) within the 'Target FEC Stack' TLV within the
         launched VCCV trace route request.

         A row is created when the test's tmnxOamVccvTrCtlSwitTgtFecType is set
         to 'fec128(2)'.

         A row is destroyed when the tmnxOamVccvTrCtlTable row is destroyed.

         All the objects in a row must be set in one SNMP Set PDU.  Otherwise,
         the SNMP Set PDU will be rejected."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamVccvTrTgFec128CtlTable 1 }

TmnxOamVccvTrTgFec128CtlEntry    ::= SEQUENCE
{
    tmnxOamVccvTrTgFec128CtlSrcAddrT InetAddressType,
    tmnxOamVccvTrTgFec128CtlSrcAddr  InetAddress,
    tmnxOamVccvTrTgFec128CtlDstAddrT InetAddressType,
    tmnxOamVccvTrTgFec128CtlDstAddr  InetAddress,
    tmnxOamVccvTrTgFec128CtlPwId     Unsigned32,
    tmnxOamVccvTrTgFec128CtlPwType   Unsigned32
}

tmnxOamVccvTrTgFec128CtlSrcAddrT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgFec128CtlSrcAddrT specifies the address
         type of tmnxOamVccvTrTgFec128CtlSrcAddr."
    DEFVAL      { unknown }
    ::= { tmnxOamVccvTrTgFec128CtlEntry 1 }

tmnxOamVccvTrTgFec128CtlSrcAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgFec128CtlSrcAddr specifies the value to be
         copied into the Sender's PE Address (Sender's Provider Edge Address)
         field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC
         Stack' TLV within the launched VCCV trace route request."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    DEFVAL      { ''H }
    ::= { tmnxOamVccvTrTgFec128CtlEntry 2 }

tmnxOamVccvTrTgFec128CtlDstAddrT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgFec128CtlDstAddrT specifies the address
         type of tmnxOamVccvTrTgFec128CtlDstAddr."
    DEFVAL      { unknown }
    ::= { tmnxOamVccvTrTgFec128CtlEntry 3 }

tmnxOamVccvTrTgFec128CtlDstAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgFec128CtlDstAddr specifies the value to be
         copied into the 'Remote PE Address' (Remote Provider Edge Address)
         field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC
         Stack' TLV within the launched VCCV trace route request."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    DEFVAL      { ''H }
    ::= { tmnxOamVccvTrTgFec128CtlEntry 4 }

tmnxOamVccvTrTgFec128CtlPwId     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgFec128CtlPwId specifies the value to be
         copied into the 'PW ID' (Pseudowire Identifier) field of the 'FEC 128
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV trace route request.

         Zero indicates no Pseudowire Identifier has been configured."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgFec128CtlEntry 5 }

tmnxOamVccvTrTgFec128CtlPwType   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgFec128CtlPwType specifies the value to be
         copied into the 'PW Type' (Pseudowire Type) field of the 'FEC 128
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV trace route request.  The code points are defined in RFC
         4446.

         SROS supports services corresponding to the following RFC 4446 PW Type
         code points.

         PW Type    Description
         -------    ---------------------------------------
          2         ATM AAL5 SDU VCC transport
          3         ATM transparent cell transport
          5         Ethernet
          9         ATM n-to-one VCC cell transport
         10         ATM n-to-one VPC cell transport
         17         Structure-agnostic E1 over packet
         18         Structure-agnostic T1 (DS1) over packet
         21         CES over PSN basic mode
         23         CES over PSN TDM with CAS

         Zero indicates no Pseudowire Type has been configured."
    REFERENCE
        "RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
         Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)').
         RFC 4446, 'IANA Allocations for Pseudowire Edge to Edge Emulation
         (PWE3)', Section 3.2, 'MPLS Pseudowire Type'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgFec128CtlEntry 6 }

tmnxOamVccvTrTgStaticCtlTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamVccvTrTgStaticCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvTrTgStaticCtlTable contains the target information for VCCV
         (Virtual Circuit Connectivity Verification) trace route tests which
         switch to downstream static (i.e. MPLS-TP) segments."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    ::= { tmnxOamTraceRouteObjs 35 }

tmnxOamVccvTrTgStaticCtlEntry    OBJECT-TYPE
    SYNTAX      TmnxOamVccvTrTgStaticCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamVccvTrTgStaticCtlEntry contains the target information for a
         VCCV trace route test which switches to a downstream static (i.e.
         MPLS-TP) segment.

         The values in a row are used to fill a 'Static Pseudowire' sub-TLV
         (Type, Length, Value) within the 'Target FEC Stack' TLV within the
         launched VCCV trace route request.

         A row is created when the test's tmnxOamVccvTrCtlSwitTgtFecType is set
         to 'static(3)'.

         A row is destroyed when the tmnxOamVccvTrCtlTable row is destroyed.

         All the objects in a row must be set in one SNMP Set PDU.  Otherwise,
         the SNMP Set PDU will be rejected."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamVccvTrTgStaticCtlTable 1 }

TmnxOamVccvTrTgStaticCtlEntry    ::= SEQUENCE
{
    tmnxOamVccvTrTgStaticCtlAgi      TmnxVPNRouteDistinguisher,
    tmnxOamVccvTrTgStaticCtlSaiiGlbl TmnxPwGlobalIdOrZero,
    tmnxOamVccvTrTgStaticCtlSaiiNode TmnxMplsTpNodeID,
    tmnxOamVccvTrTgStaticCtlSaiiAcId Unsigned32,
    tmnxOamVccvTrTgStaticCtlTaiiGlbl TmnxPwGlobalIdOrZero,
    tmnxOamVccvTrTgStaticCtlTaiiNode TmnxMplsTpNodeID,
    tmnxOamVccvTrTgStaticCtlTaiiAcId Unsigned32
}

tmnxOamVccvTrTgStaticCtlAgi      OBJECT-TYPE
    SYNTAX      TmnxVPNRouteDistinguisher
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgStaticCtlAgi specifies the value to be
         copied into the 'Service Identifier' field of the 'Static Pseudowire'
         sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV
         trace route request.  As specified in RFC 6426, the 'Service
         Identifier' field may be filled with an AGI (Attachment Group
         Identifier).

         The all-zeroes value indicates no Service Identifier has been
         configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 4446, 'IANA Allocations for Pseudowire Edge to Edge Emulation
         (PWE3)', section 3.4.2, 'Attachment Group Identifier (AGI) Type'."
    DEFVAL      { '0000000000000000'H }
    ::= { tmnxOamVccvTrTgStaticCtlEntry 1 }

tmnxOamVccvTrTgStaticCtlSaiiGlbl OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgStaticCtlSaiiGlbl specifies the value to
         be copied into the 'Source Global ID' field of the 'Static Pseudowire'
         sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV
         trace route request.

         Zero indicates no Source Global ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 3,
         'Uniquely Identifying an Operator - the Global_ID'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgStaticCtlEntry 2 }

tmnxOamVccvTrTgStaticCtlSaiiNode OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgStaticCtlSaiiNode specifies the value to
         be copied into the 'Source Node ID' field of the 'Static Pseudowire'
         sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV
         trace route request.

         Zero indicates no Source Node ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 4,
         'Node and Interface Identifiers'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgStaticCtlEntry 3 }

tmnxOamVccvTrTgStaticCtlSaiiAcId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgStaticCtlSaiiAcId specifies the value to
         be copied into the 'Source AC-ID' (Source Attachment Circuit
         Identifier) field of the 'Static Pseudowire' sub-TLV within the
         'Target FEC Stack' TLV within the launched VCCV trace route request.

         Zero indicates no Source AC-ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', section 3.2, 'AII Type 2'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgStaticCtlEntry 4 }

tmnxOamVccvTrTgStaticCtlTaiiGlbl OBJECT-TYPE
    SYNTAX      TmnxPwGlobalIdOrZero
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgStaticCtlTaiiGlbl specifies the value to
         be copied into the 'Destination Global ID' field of the 'Static
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV trace route request.

         Zero indicates no Destination Global ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 3,
         'Uniquely Identifying an Operator - the Global_ID'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgStaticCtlEntry 5 }

tmnxOamVccvTrTgStaticCtlTaiiNode OBJECT-TYPE
    SYNTAX      TmnxMplsTpNodeID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgStaticCtlTaiiNode specifies the value to
         be copied into the 'Destination Node ID' field of the 'Static
         Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
         launched VCCV trace route request.

         Zero indicates no Destination Node ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 6370, 'MPLS Transport Profile (MPLS-TP) Identifiers', section 4,
         'Node and Interface Identifiers'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgStaticCtlEntry 6 }

tmnxOamVccvTrTgStaticCtlTaiiAcId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamVccvTrTgStaticCtlTaiiAcId specifies the value to
         be copied into the 'Destination AC-ID' (Destination Attachment Circuit
         Identifier) field of the 'Static Pseudowire' sub-TLV within the
         'Target FEC Stack' TLV within the launched VCCV trace route request.

         Zero indicates no Destination AC-ID has been configured."
    REFERENCE
        "RFC 6426, 'MPLS On-Demand Connectivity Verification and Route Tracing',
         section 2.3.2, 'Static Pseudowire Sub-TLV'.
         RFC 5003, 'Attachment Individual Identifier (AII) Types for
         Aggregation', section 3.2, 'AII Type 2'."
    DEFVAL      { 0 }
    ::= { tmnxOamVccvTrTgStaticCtlEntry 7 }

tmnxOamIcmpTrLabelStackTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamIcmpTrLabelStackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamIcmpTrLabelStackTable contains the information read from RFC
         4950 MPLS Label Stack Objects in ICMPv4 or ICMPv6 replies, received in
         response to locally initiated 'icmpTraceRoute(5)' tests."
    REFERENCE
        "RFC 4950, 'ICMP Extensions for Multiprotocol Label Switching', Section
         5, 'MPLS Label Stack Object'."
    ::= { tmnxOamTraceRouteObjs 36 }

tmnxOamIcmpTrLabelStackEntry     OBJECT-TYPE
    SYNTAX      TmnxOamIcmpTrLabelStackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamIcmpTrLabelStackEntry contains the information present in one
         member of an RFC 4950 MPLS Label Stack Object, as received in one
         ICMPv4 or ICMPv6 reply (received in response to a locally initiated
         'icmpTraceRoute(5)' test).

         One ICMPv4 or ICMPv6 reply can contain at most one MPLS Label Stack
         Object.  The MPLS Label Stack Object is a structure in the reply,
         containing the MPLS encapsulation used for the test.  One MPLS Label
         Stack Object contains one or more members.

         The first six indices specify the ICMPv4 or ICMPv6 reply.  The seventh
         index specifies the member number within the MPLS Label Stack Object.

         SROS creates rows in this table when an ICMPv4 or ICMPv6 reply is
         received (in response to a locally initiated 'icmpTraceRoute(5)' test)
         containing an MPLS Label Stack Object.  One row is created for each
         member in the MPLS Label Stack Object.

         SROS destroys rows in this table when the corresponding
         tmnxOamTrProbeHistoryTable row is destroyed."
    REFERENCE
        "RFC 4950, 'ICMP Extensions for Multiprotocol Label Switching', Section
         5, 'MPLS Label Stack Object'."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex,
        tmnxOamIcmpTrLabelStackMemberNum
    }
    ::= { tmnxOamIcmpTrLabelStackTable 1 }

TmnxOamIcmpTrLabelStackEntry     ::= SEQUENCE
{
    tmnxOamIcmpTrLabelStackMemberNum Unsigned32,
    tmnxOamIcmpTrLabelStackLabel     Unsigned32,
    tmnxOamIcmpTrLabelStackExperimnt Unsigned32,
    tmnxOamIcmpTrLabelStackBottom    Unsigned32,
    tmnxOamIcmpTrLabelStackTtl       Unsigned32
}

tmnxOamIcmpTrLabelStackMemberNum OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrLabelStackMemberNum specifies the member
         number within an RFC 4950 MPLS Label Stack Object.

         The first member within an MPLS Label Stack Object is member number 1.
         Subsequent members (if any) are numbered consecutively."
    REFERENCE
        "RFC 4950, 'ICMP Extensions for Multiprotocol Label Switching', Section
         5, 'MPLS Label Stack Object'."
    ::= { tmnxOamIcmpTrLabelStackEntry 1 }

tmnxOamIcmpTrLabelStackLabel     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1048575)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrLabelStackLabel indicates the Label field
         within the specified RFC 4950 MPLS Label Stack Object member."
    REFERENCE
        "RFC 4950, 'ICMP Extensions for Multiprotocol Label Switching', Section
         5, 'MPLS Label Stack Object'."
    ::= { tmnxOamIcmpTrLabelStackEntry 2 }

tmnxOamIcmpTrLabelStackExperimnt OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrLabelStackExperimnt indicates the
         Experimental Use field within the specified RFC 4950 MPLS Label Stack
         Object member."
    REFERENCE
        "RFC 4950, 'ICMP Extensions for Multiprotocol Label Switching', Section
         5, 'MPLS Label Stack Object'."
    ::= { tmnxOamIcmpTrLabelStackEntry 3 }

tmnxOamIcmpTrLabelStackBottom    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrLabelStackBottom indicates the Bottom of
         Stack bit within the specified RFC 4950 MPLS Label Stack Object
         member."
    REFERENCE
        "RFC 4950, 'ICMP Extensions for Multiprotocol Label Switching', Section
         5, 'MPLS Label Stack Object'."
    ::= { tmnxOamIcmpTrLabelStackEntry 4 }

tmnxOamIcmpTrLabelStackTtl       OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrLabelStackTtl indicates the Time To Live
         field within the specified RFC 4950 MPLS Label Stack Object member."
    REFERENCE
        "RFC 4950, 'ICMP Extensions for Multiprotocol Label Switching', Section
         5, 'MPLS Label Stack Object'."
    ::= { tmnxOamIcmpTrLabelStackEntry 5 }

tmnxOamBierTrCtlTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBierTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierTrCtlTable (along with tmnxOamTrCtlTable) contains the
         configuration information for BIER (Bit Index Explicit Replication)
         trace route tests."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017.
         IETF 'BIER Ping and Trace draft-ietf-bier-ping-05', 24-Apr-2019."
    ::= { tmnxOamTraceRouteObjs 37 }

tmnxOamBierTrCtlEntry            OBJECT-TYPE
    SYNTAX      TmnxOamBierTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierTrCtlEntry (along with tmnxOamTrCtlEntry) contains the
         configuration information for a BIER trace route test.

         A row is created when the corresponding tmnxOamTrCtlTestMode is set to
         'bierTrace'.

         A row is destroyed when the corresponding tmnxOamTrCtlTable row is
         destroyed (using tmnxOamTrCtlRowStatus).

         The values in a particular row in this table cannot be changed when
         the corresponding tmnxOamTrCtlAdminStatus is 'enabled(1)'."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamBierTrCtlTable 1 }

TmnxOamBierTrCtlEntry            ::= SEQUENCE
{
    tmnxOamBierTrCtlSubDomain        Unsigned32,
    tmnxOamBierTrCtlBfrId            Unsigned32,
    tmnxOamBierTrCtlBfrPfxAddrType   InetAddressType,
    tmnxOamBierTrCtlBfrPfxAddress    InetAddress
}

tmnxOamBierTrCtlSubDomain        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrCtlSubDomain specifies the BIER sub-domain
         to be tested.

         Zero indicates the default sub-domain."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'.
         IETF 'BIER Ping and Trace draft-ietf-bier-ping-05', 24-Apr-2019,
         Section 4.3, 'Sending BIER Echo Request'."
    DEFVAL      { 0 }
    ::= { tmnxOamBierTrCtlEntry 1 }

tmnxOamBierTrCtlBfrId            OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4096)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrCtlBfrId specifies the identifier of the
         Bit-Forwarding Router (BFR) to be traced.

         The BFR-ID must be a member of the tested sub-domain (as configured
         using tmnxOamBierTrCtlSubDomain).  Otherwise, the test will fail.

         Zero indicates no BFR-ID has been configured.

         There are two methods to configure the destination to be traced:
         1.  tmnxOamBierTrCtlBfrId.
         2.  tmnxOamBierTrCtlBfrPfxAddrType, tmnxOamBierTrCtlBfrPfxAddress.

         Exactly one of the methods must be used.  Otherwise, the test will
         fail."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'."
    DEFVAL      { 0 }
    ::= { tmnxOamBierTrCtlEntry 2 }

tmnxOamBierTrCtlBfrPfxAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrCtlBfrPfxAddrType specifies the address type
         of tmnxOamBierTrCtlBfrPfxAddress."
    DEFVAL      { unknown }
    ::= { tmnxOamBierTrCtlEntry 3 }

tmnxOamBierTrCtlBfrPfxAddress    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrCtlBfrPfxAddress specifies a BFR prefix used
         as a destination address for a BIER trace test.

         There are two methods to configure the destination to be traced:
         1.  tmnxOamBierTrCtlBfrId.
         2.  tmnxOamBierTrCtlBfrPfxAddrType, tmnxOamBierTrCtlBfrPfxAddress.

         Exactly one of the methods must be used.  Otherwise, the test will
         fail."
    DEFVAL      { ''H }
    ::= { tmnxOamBierTrCtlEntry 4 }

tmnxOamBierTrProbeHistoryTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBierTrProbeHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierTrProbeHistoryTable (along with tmnxOamTrProbeHistoryTable)
         contains the per-probe results for Bit Index Explicit Replication
         (BIER) trace tests."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019.
         RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017."
    ::= { tmnxOamTraceRouteObjs 38 }

tmnxOamBierTrProbeHistoryEntry   OBJECT-TYPE
    SYNTAX      TmnxOamBierTrProbeHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBierTrProbeHistoryEntry (along with tmnxOamTrProbeHistoryEntry)
         contains the results for one BIER trace probe.

         A row is created/destroyed when the corresponding
         tmnxOamTrProbeHistoryEntry is created/destroyed for a 'bierTrace'
         test.

         All the indices match the corresponding tmnxOamTrProbeHistoryEntry
         indices."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 4.6, 'Receiving Echo Reply'."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex,
        tmnxOamTrResultsTestRunIndex,
        tmnxOamTrProbeHistoryIndex,
        tmnxOamTrProbeHistoryHopIndex,
        tmnxOamTrProbeHistoryProbeIndex
    }
    ::= { tmnxOamBierTrProbeHistoryTable 1 }

TmnxOamBierTrProbeHistoryEntry   ::= SEQUENCE
{
    tmnxOamBierTrHistoryBfrId        Unsigned32,
    tmnxOamBierTrHistoryReturnCode   TmnxOamBierHistoryReturnCode,
    tmnxOamBierTrHistoryUpStrIfAddrT InetAddressType,
    tmnxOamBierTrHistoryUpStrIfAddr  InetAddress,
    tmnxOamBierTrHistoryUpStrIfNum   Unsigned32,
    tmnxOamBierTrHistoryDnStrAddrTyp InetAddressType,
    tmnxOamBierTrHistoryDnStrAddr    InetAddress,
    tmnxOamBierTrHistoryDnStrIfAddrT InetAddressType,
    tmnxOamBierTrHistoryDnStrIfAddr  InetAddress,
    tmnxOamBierTrHistoryDnStrIfNum   Unsigned32
}

tmnxOamBierTrHistoryBfrId        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4096)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryBfrId indicates the identifier of the
         Bit-Forwarding Router (BFR) targeted by the launched BIER Echo
         Request.

         Zero is returned if the BFR-ID cannot be determined.

         The BFR-Prefix (which is an alternative identifier of the target) can
         be read using tmnxOamTrProbeHistoryAddress."
    REFERENCE
        "RFC 8279, 'Multicast Using Bit Index Explicit Replication (BIER)',
         November 2017, Section 1, 'Introduction'."
    ::= { tmnxOamBierTrProbeHistoryEntry 1 }

tmnxOamBierTrHistoryReturnCode   OBJECT-TYPE
    SYNTAX      TmnxOamBierHistoryReturnCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryReturnCode indicates the value copied
         from the Return Code field of the BIER Echo Reply PDU.

         Zero (i.e. 'No Return Code') is returned if a BIER Echo Reply PDU did
         not arrive (e.g. in the case of a timeout)."
    ::= { tmnxOamBierTrProbeHistoryEntry 2 }

tmnxOamBierTrHistoryUpStrIfAddrT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryUpStrIfAddrT indicates the IP address
         type of the address read using tmnxOamBierTrHistoryUpStrIfAddr."
    ::= { tmnxOamBierTrProbeHistoryEntry 3 }

tmnxOamBierTrHistoryUpStrIfAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryUpStrIfAddr indicates the IP address
         copied from the Upstream Address field of the Upstream Interface TLV
         of the BIER Echo Reply.

         When an IP address is not available, tmnxOamBierTrHistoryUpStrIfAddrT
         is 'unknown'.

         If the TLV's Upstream Address field contains an interface number (as
         tagged by the TLV's Address Type field), the interface number is
         available in tmnxOamBierTrHistoryUpStrIfNum."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 3.3.7, 'Upstream Interface TLV'."
    ::= { tmnxOamBierTrProbeHistoryEntry 4 }

tmnxOamBierTrHistoryUpStrIfNum   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryUpStrIfNum indicates the interface
         number copied from the Upstream Address field of the Upstream
         Interface TLV of the BIER Echo Reply.

         When an interface number is not available,
         tmnxOamBierTrHistoryUpStrIfNum is zero.

         If the TLV's Upstream Address field contains an IP address (as tagged
         by the TLV's Address Type field), the IP address is available in
         tmnxOamBierTrHistoryUpStrIfAddr."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 3.3.7, 'Upstream Interface TLV'."
    ::= { tmnxOamBierTrProbeHistoryEntry 5 }

tmnxOamBierTrHistoryDnStrAddrTyp OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryDnStrAddrTyp indicates the IP address
         type of the address read using tmnxOamBierTrHistoryDnStrAddr."
    ::= { tmnxOamBierTrProbeHistoryEntry 6 }

tmnxOamBierTrHistoryDnStrAddr    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryDnStrAddr indicates the IP address
         copied from the Downstream Address field of the Downstream Mapping TLV
         of the BIER Echo Reply.

         When an IP address is not available, tmnxOamBierTrHistoryDnStrAddrTyp
         is 'unknown'."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 3.3.4, 'Downstream Mapping TLV'."
    ::= { tmnxOamBierTrProbeHistoryEntry 7 }

tmnxOamBierTrHistoryDnStrIfAddrT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryDnStrIfAddrT indicates the IP address
         type of the address read using tmnxOamBierTrHistoryDnStrIfAddr."
    ::= { tmnxOamBierTrProbeHistoryEntry 8 }

tmnxOamBierTrHistoryDnStrIfAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryDnStrIfAddr indicates the IP address
         copied from the Downstream Interface Address field of the Downstream
         Mapping TLV of the BIER Echo Reply.

         When an IP address is not available, tmnxOamBierTrHistoryDnStrIfAddrT
         is 'unknown'.

         If the TLV's Downstream Interface Address field contains an interface
         number (as tagged by the TLV's Address Type field), the interface
         number is available in tmnxOamBierTrHistoryDnStrIfNum."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 3.3.4, 'Downstream Mapping TLV'."
    ::= { tmnxOamBierTrProbeHistoryEntry 9 }

tmnxOamBierTrHistoryDnStrIfNum   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBierTrHistoryDnStrIfNum indicates the interface
         number copied from the Downstream Interface Address field of the
         Downstream Mapping TLV of the BIER Echo Reply.

         When an interface number is not available,
         tmnxOamBierTrHistoryDnStrIfNum is zero.

         If the TLV's Downstream Interface Address field contains an IP address
         (as tagged by the TLV's Address Type field), the IP address is
         available in tmnxOamBierTrHistoryDnStrIfAddr."
    REFERENCE
        "IETF draft-ietf-bier-ping-05, 'BIER Ping and Trace', April 24, 2019,
         Section 3.3.4, 'Downstream Mapping TLV'."
    ::= { tmnxOamBierTrProbeHistoryEntry 10 }

tmnxOamIcmpTrCtlTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamIcmpTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamIcmpTrCtlTable (along with tmnxOamTrCtlTable) contains the
         configuration information for 'icmpTraceRoute' tests."
    ::= { tmnxOamTraceRouteObjs 39 }

tmnxOamIcmpTrCtlEntry            OBJECT-TYPE
    SYNTAX      TmnxOamIcmpTrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamIcmpTrCtlEntry (along with tmnxOamTrCtlEntry) contains the
         configuration information for an 'icmpTraceRoute' test.

         A row is created when the corresponding tmnxOamTrCtlTestMode is set to
         'icmpTraceRoute'.

         A row is destroyed when the corresponding tmnxOamTrCtlTable row is
         destroyed (using tmnxOamTrCtlRowStatus).

         The values in a particular row in this table cannot be changed when
         the corresponding tmnxOamTrCtlAdminStatus is 'enabled(1)'."
    INDEX       {
        tmnxOamTrCtlOwnerIndex,
        tmnxOamTrCtlTestIndex
    }
    ::= { tmnxOamIcmpTrCtlTable 1 }

TmnxOamIcmpTrCtlEntry            ::= SEQUENCE
{
    tmnxOamIcmpTrCtlProtocol         INTEGER,
    tmnxOamIcmpTrCtlDestTcpUdpPort   Unsigned32,
    tmnxOamIcmpTrCtlDestUdpPortFixed TruthValue,
    tmnxOamIcmpTrCtlPadSize          Unsigned32
}

tmnxOamIcmpTrCtlProtocol         OBJECT-TYPE
    SYNTAX      INTEGER {
        udp (1),
        tcp (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrCtlProtocol specifies the type of packet to
         be sent for the 'icmpTraceRoute' test.

         'udp' specifies the transmission of UDP packets. 'udp' was the only
         supported packet type, prior to SROS Release 21.10.

         'tcp' specifies the transmission of TCP SYN packets.

         If the 'icmpTraceRoute' test is an SAA test (as created using
         tmnxOamSaaCtlRowStatus), only 'udp' is supported."
    DEFVAL      { udp }
    ::= { tmnxOamIcmpTrCtlEntry 1 }

tmnxOamIcmpTrCtlDestTcpUdpPort   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrCtlDestTcpUdpPort specifies the destination
         UDP/TCP port number(s) sent in the test's packets.

         If tmnxOamIcmpTrCtlProtocol='udp', the value is a UDP port number.
         In that case:
         a) If tmnxOamIcmpTrCtlDestUdpPortFixed = 'true', every packet sent for
            the test has destination UDP port tmnxOamIcmpTrCtlDestTcpUdpPort.
         b) If tmnxOamIcmpTrCtlDestUdpPortFixed = 'false', the first packet sent
            for the test has destination UDP port
            tmnxOamIcmpTrCtlDestTcpUdpPort.  The second packet sent
            for the test has destination UDP port
            tmnxOamIcmpTrCtlDestTcpUdpPort+1.  Etc.

         If tmnxOamIcmpTrCtlProtocol='tcp', the value is a TCP port number.  In
         that case, every packet sent for the test has destination TCP port
         tmnxOamIcmpTrCtlDestTcpUdpPort.

         The default is the port designated by IANA for UDP traceroute and TCP
         traceroute.

         Using, for example, the default 'icmpTraceRoute' configuration
             tmnxOamIcmpTrCtlProtocol = 'udp'
             tmnxOamIcmpTrCtlDestTcpUdpPort = 33434
             tmnxOamIcmpTrCtlDestUdpPortFixed = 'false'
         in a network with the IANA-standard mtrace UDP port 33435 configured
         for mtrace may result in conflicts between 'icmpTraceRoute' tests and
         mtrace.

         If the 'icmpTraceRoute' test is an SAA test (as created using
         tmnxOamSaaCtlRowStatus), only 33434 is supported."
    REFERENCE
        "https://www.iana.org/assignments/service-names-port-numbers/
         service-names-port-numbers.txt"
    DEFVAL      { 33434 }
    ::= { tmnxOamIcmpTrCtlEntry 2 }

tmnxOamIcmpTrCtlDestUdpPortFixed OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrCtlDestUdpPortFixed specifies whether or not
         to increment the destination UDP port number for each packet sent for
         a UDP 'icmpTraceRoute' test.  Details are in the
         tmnxOamIcmpTrCtlDestTcpUdpPort DESCRIPTION clause.

         If the 'icmpTraceRoute' test is an SAA test (as created using
         tmnxOamSaaCtlRowStatus), only 'false' is supported."
    DEFVAL      { false }
    ::= { tmnxOamIcmpTrCtlEntry 3 }

tmnxOamIcmpTrCtlPadSize          OBJECT-TYPE
    SYNTAX      Unsigned32 (0..9786)
    UNITS       "octets"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIcmpTrCtlPadSize specifies the number of padding
         octets to add to the launched request packets for an 'icmpTraceRoute'
         test.

         Padding a request packet is typically used to ensure the test works
         with large packets.

         The combination
             tmnxOamIcmpTrCtlPadSize > 0, and
             tmnxOamIcmpTrCtlProtocol = 'tcp'
         is not supported by some third party far end nodes.

         If the 'icmpTraceRoute' test is an SAA test (as created using
         tmnxOamSaaCtlRowStatus), only zero is supported.

         tmnxOamTrCtlDataSize is ignored for 'icmpTraceRoute' tests."
    DEFVAL      { 0 }
    ::= { tmnxOamIcmpTrCtlEntry 4 }

tmnxOamSaaObjs                   OBJECT IDENTIFIER ::= { tmnxOamTestObjs 3 }

tmnxOamSaaNotifyObjects          OBJECT IDENTIFIER ::= { tmnxOamSaaObjs 1 }

tmnxOamSaaCtlTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamSaaCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamSaaCtlTable contains configuration and status information for
         Service Assurance Agent (SAA) tests.

         A TIMETRA-OAM-TEST-MIB test has one of two retention types.
         1.  An SAA test has a tmnxOamSaaCtlTable row.  All the configuration
         information for an SAA test is retained across an SROS CPM activity
         switch or an SROS CPM reset.
         2.  An OAM test does not have a tmnxOamSaaCtlTable row.  All the
         configuration information for an OAM test is forgotten across an SROS
         CPM activity switch or an SROS CPM reset.

         SAA tests are supported for a subset of the test types, as described
         in the following DESCRIPTION clauses:
             tmnxOamPingCtlTestMode
             tmnxOamTrCtlTestMode.

         The results of an SAA test run (or an OAM test run) are stored in the
         ping or trace route results tables (e.g. tmnxOamPingResultsTable,
         tmnxOamPingHistoryTable, tmnxOamTrResultsTable, tmnxOamTrHopsTable,
         tmnxOamTrProbeHistoryTable)."
    ::= { tmnxOamSaaObjs 2 }

tmnxOamSaaCtlEntry               OBJECT-TYPE
    SYNTAX      TmnxOamSaaCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamSaaCtlEntry contains the configuration and status information
         for one SAA test.

         Rows are created and destroyed using tmnxOamSaaCtlRowStatus."
    INDEX       {
        tmnxOamSaaCtlOwnerIndex,
        tmnxOamSaaCtlTestIndex
    }
    ::= { tmnxOamSaaCtlTable 1 }

TmnxOamSaaCtlEntry               ::= SEQUENCE
{
    tmnxOamSaaCtlOwnerIndex          SnmpAdminString,
    tmnxOamSaaCtlTestIndex           SnmpAdminString,
    tmnxOamSaaCtlRowStatus           RowStatus,
    tmnxOamSaaCtlStorageType         StorageType,
    tmnxOamSaaCtlLastChanged         TimeStamp,
    tmnxOamSaaCtlAdminStatus         TmnxAdminState,
    tmnxOamSaaCtlDescr               TItemDescription,
    tmnxOamSaaCtlTestMode            TmnxOamTestMode,
    tmnxOamSaaCtlRuns                Counter32,
    tmnxOamSaaCtlFailures            Counter32,
    tmnxOamSaaCtlLastRunResult       TmnxOamTestResult,
    tmnxOamSaaCtlAcctPolicyId        Integer32,
    tmnxOamSaaCtlSuppressAccounting  TruthValue,
    tmnxOamSaaCtlContinuous          TruthValue,
    tmnxOamSaaCtlKeepProbeHistoryAdm INTEGER,
    tmnxOamSaaCtlKeepProbeHistoryOpr INTEGER
}

tmnxOamSaaCtlOwnerIndex          OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlOwnerIndex specifies the name of the owner
         of the test."
    ::= { tmnxOamSaaCtlEntry 1 }

tmnxOamSaaCtlTestIndex           OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlTestIndex specifies the test name of the
         test.

         The test is identified by the owner name and the test name.  One owner
         typically owns several tests.  This indexing method ensures tests
         created by several owners have unique indices."
    ::= { tmnxOamSaaCtlEntry 2 }

tmnxOamSaaCtlRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlRowStatus specifies the row status of the
         SAA test.

         When creating an SAA test
         1.  The tmnxOamSaaCtlTable row must be created first.
         2.  The tmnxOamPingCtlTable or tmnxOamTrCtlTable row must be created
             second.

         Destroying a tmnxOamSaaCtlTable row destroys the corresponding
         tmnxOamPingCtlTable or tmnxOamTrCtlTable row (if any).

         An attempt to destroy a tmnxOamSaaCtlTable row will fail if
         tmnxOamSaaCtlAdminStatus is 'inService(2)'."
    ::= { tmnxOamSaaCtlEntry 3 }

tmnxOamSaaCtlStorageType         OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 14.0 R1.  There is no
         replacement object."
    DEFVAL      { nonVolatile }
    ::= { tmnxOamSaaCtlEntry 4 }

tmnxOamSaaCtlLastChanged         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlLastChanged indicates the time the value of
         a settable object in this row was last changed."
    ::= { tmnxOamSaaCtlEntry 5 }

tmnxOamSaaCtlAdminStatus         OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlAdminStatus specifies the administrative
         state of the SAA test.

         tmnxOamSaaCtlAdminStatus = 'inService(2)' is a prerequisite for
         starting an SAA test run.  Once that prerequisite is met, the test run
         can be started by setting the corresponding tmnxOamPingCtlAdminStatus
         or tmnxOamTrCtlAdminStatus to 'enabled(1)'.

         When the tmnxOamSaaCtlAdminStatus is 'inService(2)', an attempt to
         modify any other configurable run-time property of the test (e.g.
         tmnxOamPingCtlProbeCount, tmnxOamTrCtlFcName) will fail."
    DEFVAL      { outOfService }
    ::= { tmnxOamSaaCtlEntry 6 }

tmnxOamSaaCtlDescr               OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlDescr specifies the description of the SAA
         test."
    DEFVAL      { "" }
    ::= { tmnxOamSaaCtlEntry 7 }

tmnxOamSaaCtlTestMode            OBJECT-TYPE
    SYNTAX      TmnxOamTestMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlTestMode indicates the type of SAA test to
         be performed.

         When the value of this object is 'notConfigured(0)', no associated row
         exists in either tmnxOamPingCtlTable or tmnxOamTrCtlTable.

         When the value of this object is 'ping(1)', an associated row exists
         in the tmnxOamPingCtlTable.

         When the value of this object is 'traceroute(2)', an associated row
         exists in the tmnxOamTrCtlTable."
    DEFVAL      { notConfigured }
    ::= { tmnxOamSaaCtlEntry 8 }

tmnxOamSaaCtlRuns                OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlRuns indicates the number of times this SAA
         test has started."
    ::= { tmnxOamSaaCtlEntry 9 }

tmnxOamSaaCtlFailures            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlFailures indicates the number of times this
         SAA test has failed."
    ::= { tmnxOamSaaCtlEntry 10 }

tmnxOamSaaCtlLastRunResult       OBJECT-TYPE
    SYNTAX      TmnxOamTestResult
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlLastRunResult indicates the completion
         status the last time this test was executed.  If this SAA test is
         currently in progress, this object indicates the result of the
         previous test run, if any."
    ::= { tmnxOamSaaCtlEntry 11 }

tmnxOamSaaCtlAcctPolicyId        OBJECT-TYPE
    SYNTAX      Integer32 (0..99)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlAcctPolicyId specifies the accounting policy
         used to record the information obtained from the results tables.  A
         value of zero specifies no accounting policy.

         A non-zero accounting policy must be configured with the SAA record
         generation option.  For example, an attempt to set this object to 99
         will be rejected if TIMETRA-LOG-MIB::tmnxLogApRecord.99 is not
         'saa(32)'."
    DEFVAL      { 0 }
    ::= { tmnxOamSaaCtlEntry 12 }

tmnxOamSaaCtlSuppressAccounting  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlSuppressAccounting specifies whether or not
         the accounting file update is suppressed. The value 'true(1)' is
         applicable only when an accounting policy has been specified using
         tmnxOamSaaCtlAcctPolicyId.

         Upon completion of a test run, this object is reset to its default
         value."
    DEFVAL      { false }
    ::= { tmnxOamSaaCtlEntry 13 }

tmnxOamSaaCtlContinuous          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlContinuous specifies whether or not the SAA
         test is to be executed indefinitely.

         Setting tmnxOamSaaCtlContinuous to 'true(1)' is accepted for the
         following ping test types:
            'cpePing           (12)',
            'dnsPing           (16)',
            'ethCfmLoopback    (19)',
            'ethCfmTwoWayDelay (20)',
            'ethCfmTwoWaySlm   (22)',
            'icmpPing          (15)',
            'lspPing           ( 8)',
            'macPing           ( 5)',
            'sdpPing           ( 1)',
            'vccvPing          (14)',
            'vprnPing          ( 9)'.

         Setting tmnxOamSaaCtlContinuous to 'true(1)' is accepted for the
         following trace test types:
            'ethCfmLinkTrace (9)'."
    DEFVAL      { false }
    ::= { tmnxOamSaaCtlEntry 14 }

tmnxOamSaaCtlKeepProbeHistoryAdm OBJECT-TYPE
    SYNTAX      INTEGER {
        keep (1),
        drop (2),
        auto (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlKeepProbeHistoryAdm specifies whether or not
         per-probe history table rows will be created for this test.  A test
         without per-probe history table rows consumes less CPM RAM.

         tmnxOamSaaCtlKeepProbeHistoryOpr is a read-only operational value
         derived from tmnxOamSaaCtlKeepProbeHistoryAdm.  The bulk of the
         tmnxOamSaaCtlKeepProbeHistoryAdm semantics are described in the
         tmnxOamSaaCtlKeepProbeHistoryOpr DESCRIPTION clause.

         An attempt to set tmnxOamSaaCtlKeepProbeHistoryAdm to 'drop(2)' when
         tmnxOamSaaCtlTestMode is not 'ping(1)' returns an 'inconsistentValue'
         error to the manager."
    DEFVAL      { auto }
    ::= { tmnxOamSaaCtlEntry 15 }

tmnxOamSaaCtlKeepProbeHistoryOpr OBJECT-TYPE
    SYNTAX      INTEGER {
        keep (1),
        drop (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaCtlKeepProbeHistoryOpr indicates whether or not
         per-probe history table rows will be created for this test.  A test
         without per-probe history table rows consumes less CPM RAM.

         The value of tmnxOamSaaCtlKeepProbeHistoryOpr is derived from the
         value of tmnxOamSaaCtlKeepProbeHistoryAdm, as shown in the following
         table.

         tmnxOamSaaCtlKeepProbeHistoryAdm tmnxOamSaaCtlKeepProbeHistoryOpr
         -------------------------------- --------------------------------------
         'keep(1)'                        'keep(1)'
         'drop(2)'                        'drop(2)'
         'auto(3)'                        'keep(1)' or 'drop(2)', chosen by SROS

         The history table rows created for the combinations of
         tmnxOamSaaCtlKeepProbeHistoryOpr and tmnxOamSaaCtlTestMode values are
         shown in the following table.

         Configuration Options           History Table Rows Created
         --------------------------      --------------------------
         'keep(1)', 'ping(1)'            tmnxOamPingHistoryTable or
                                         tmnxOamMacPingHistoryTable
         'keep(1)', 'traceroute(2)'      tmnxOamTrProbeHistoryTable
         'drop(2)', 'ping(1)'            none
         'drop(2)', 'traceroute(2)'      unsupported combination.

         If tmnxOamSaaCtlTestMode is 'notConfigured(0)', the value of
         tmnxOamSaaCtlKeepProbeHistoryOpr is insignificant, since a test without
         a test mode cannot be started.  When a Get is performed on
         tmnxOamSaaCtlKeepProbeHistoryOpr in this case, 'keep(1)' is returned.

         If tmnxOamSaaCtlKeepProbeHistoryAdm is 'auto(3)':
           1.  tmnxOamSaaCtlKeepProbeHistoryOpr is 'drop(2)' if
               a) the test's probe count is greater than 100, OR
               b) the test's interval is less than one second, OR
               c) tmnxOamSaaCtlTestMode is 'ping(1)' AND the test is continuous
                  (i.e. tmnxOamSaaCtlContinuous is 'true') AND an accounting
                  policy is specified (i.e. tmnxOamSaaCtlAcctPolicyId is non-
                  zero).
           2.  Otherwise, tmnxOamSaaCtlKeepProbeHistoryOpr is 'keep(1)'."
    ::= { tmnxOamSaaCtlEntry 16 }

tmnxOamSaaThresholdTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamSaaThresholdEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamSaaThresholdTable contains notification threshold information
         for SAA tests."
    ::= { tmnxOamSaaObjs 3 }

tmnxOamSaaThresholdEntry         OBJECT-TYPE
    SYNTAX      TmnxOamSaaThresholdEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamSaaThresholdEntry contains the configuration and status
         information for one notification threshold for an SAA test.

         The first two indices specify the SAA test.

         The third index specifies the type of threshold (e.g. inbound
         latency).

         The fourth index specifies whether the threshold is
             'rising (1)' - a raise threshold, or
             'falling(2)' - a clear threshold.

         The notification tmnxOamSaaThreshold is generated when a threshold is
         crossed.

         A row is created/destroyed using tmnxOamSaaTRowStatus."
    INDEX       {
        tmnxOamSaaCtlOwnerIndex,
        tmnxOamSaaCtlTestIndex,
        tmnxOamSaaTType,
        tmnxOamSaaTDirection
    }
    ::= { tmnxOamSaaThresholdTable 1 }

TmnxOamSaaThresholdEntry         ::= SEQUENCE
{
    tmnxOamSaaTType                  TmnxOamSaaThreshold,
    tmnxOamSaaTDirection             INTEGER,
    tmnxOamSaaTRowStatus             RowStatus,
    tmnxOamSaaTLastChanged           TimeStamp,
    tmnxOamSaaTThreshold             Unsigned32,
    tmnxOamSaaTValue                 Integer32,
    tmnxOamSaaTLastSent              TimeStamp,
    tmnxOamSaaTTestMode              TmnxOamTestMode,
    tmnxOamSaaTTestRunIndex          Unsigned32
}

tmnxOamSaaTType                  OBJECT-TYPE
    SYNTAX      TmnxOamSaaThreshold
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTType specifies the type of monitored statistic
         used to determine if a tmnxOamSaaThreshold notification is generated
         at the completion of an SAA test run.

         Some combinations of threshold type and test type are not supported.
         For example, 'inLatency(7)' is not supported for 'ethCfmLoopback(19)'."
    ::= { tmnxOamSaaThresholdEntry 1 }

tmnxOamSaaTDirection             OBJECT-TYPE
    SYNTAX      INTEGER {
        rising  (1),
        falling (2)
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTDirection specifies whether to monitor this
         threshold for crossing in the rising or falling direction."
    ::= { tmnxOamSaaThresholdEntry 2 }

tmnxOamSaaTRowStatus             OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTRowStatus controls creation and deletion of
         row entries in the tmnxOamSaaThresholdTable.

         When a row in this table is created, tmnxOamSaaTThreshold must also be
         set or the row creation will fail with an inconsistentValue error."
    ::= { tmnxOamSaaThresholdEntry 3 }

tmnxOamSaaTLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTLastChanged indicates the last time the value
         of tmnxOamSaaTThreshold was modified."
    ::= { tmnxOamSaaThresholdEntry 4 }

tmnxOamSaaTThreshold             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTThreshold specifies the threshold value to
         monitor to determine when to generate a tmnxOamSaaThreshold
         notification.

         A threshold value must be set when the row entry is created."
    ::= { tmnxOamSaaThresholdEntry 5 }

tmnxOamSaaTValue                 OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTValue indicates the value of the statistic
         that last caused a tmnxOamSaaThreshold notification to be generated."
    ::= { tmnxOamSaaThresholdEntry 6 }

tmnxOamSaaTLastSent              OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTLastSent indicates the last time a
         tmnxOamSaaThreshold notification was generated as a result of crossing
         the threshold specified by the value of tmnxOamSaaTThreshold."
    ::= { tmnxOamSaaThresholdEntry 7 }

tmnxOamSaaTTestMode              OBJECT-TYPE
    SYNTAX      TmnxOamTestMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTTestMode indicates the type of SAA test for
         which a tmnxOamSaaThreshold notification was generated as a result of
         crossing the threshold specified by the value of tmnxOamSaaTThreshold.

         When the value of this object is 'notConfigured', no associated entry
         exists in either the tmnxOamPingCtlTable or tmnxOamTrCtlTable.

         When the value of this object is 'ping', an associated test entry is
         configured in the tmnxOamPingCtlTable.

         When the value of this object is 'traceroute', an associated test
         entry is configured in the tmnxOamTrCtlTable."
    ::= { tmnxOamSaaThresholdEntry 8 }

tmnxOamSaaTTestRunIndex          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSaaTTestRunIndex indicates the test run index of
         the SAA test for which the last tmnxOamSaaThreshold notification was
         generated as a result of crossing the threshold specified by the value
         of tmnxOamSaaTThreshold.

         When the value of tmnxOamSaaTTestMode is 'ping', the value of this
         object is the value of the tmnxOamPingResultsTestRunIndex that
         identifies entries for the ping test results of the test run that
         generated the last tmnxOamSaaThreshold notification.

         When the value of tmnxOamSaaTTestMode is 'traceroute', the value of
         this object is the value of the tmnxOamTrResultsTestRunIndex that
         identifies entries for the traceroute test results of the test run
         that generated the last tmnxOamSaaThreshold notification.

         When the value of tmnxOamSaaTTestMode is 'notConfigured', the value of
         this object is zero."
    ::= { tmnxOamSaaThresholdEntry 9 }

tmnxOamMobGatewayObjs            OBJECT IDENTIFIER ::= { tmnxOamTestObjs 4 }

tmnxOamMobGtpPingCtlTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamMobGtpPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMobGtpPingCtlTable contains configuration information for
         'gtpPing' tests."
    ::= { tmnxOamMobGatewayObjs 1 }

tmnxOamMobGtpPingCtlEntry        OBJECT-TYPE
    SYNTAX      TmnxOamMobGtpPingCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamMobGtpPingCtlEntry contains configuration information for one
         'gtpPing' test.

         SROS creates a row when tmnxOamPingCtlTestMode is set to 'gtpPing'.

         SROS destroys a row when the corresponding tmnxOamPingCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamPingCtlOwnerIndex,
        tmnxOamPingCtlTestIndex
    }
    ::= { tmnxOamMobGtpPingCtlTable 1 }

TmnxOamMobGtpPingCtlEntry        ::= SEQUENCE
{
    tmnxOamMobGtpPingRefPointType    INTEGER,
    tmnxOamMobGtpPingVRtrId          TmnxVRtrID,
    tmnxOamMobGtpPingPort            InetPortNumber,
    tmnxOamMobGtpPingGateway         TmnxMobGwId
}

tmnxOamMobGtpPingRefPointType    OBJECT-TYPE
    SYNTAX      INTEGER {
        s11  (1),
        s1u  (3),
        gnc  (5),
        s2bc (9),
        s2bu (10),
        s2ac (14),
        s2au (15),
        gnu  (16)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMobGtpPingRefPointType specifies the reference
         point type.

         This object is required."
    ::= { tmnxOamMobGtpPingCtlEntry 1 }

tmnxOamMobGtpPingVRtrId          OBJECT-TYPE
    SYNTAX      TmnxVRtrID
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 16.0 R1.  The replacement object is
         tmnxOamPingCtlVRtrID."
    ::= { tmnxOamMobGtpPingCtlEntry 2 }

tmnxOamMobGtpPingPort            OBJECT-TYPE
    SYNTAX      InetPortNumber
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMobGtpPingPort specifies the UDP port number of
         the destination.

         This object is required."
    ::= { tmnxOamMobGtpPingCtlEntry 3 }

tmnxOamMobGtpPingGateway         OBJECT-TYPE
    SYNTAX      TmnxMobGwId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMobGtpPingGateway specifies the mobile gateway id.

         This object is required."
    ::= { tmnxOamMobGtpPingCtlEntry 4 }

tmnxOamDnsPingCtlTable           OBJECT IDENTIFIER ::= { tmnxOamMobGatewayObjs 3 }

tmnxOamGeneralObjs               OBJECT IDENTIFIER ::= { tmnxOamTestObjs 5 }

tmnxOamMplsPduTimeStampFormat    OBJECT-TYPE
    SYNTAX      INTEGER {
        rfc4379 (0),
        unix    (1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMplsPduTimeStampFormat specifies, on a system wide
         basis:
         a) the format of the time stamp to be written into an RFC 4379 MPLS
            Echo Request PDU, when initiating a ping or trace route test,
            and
         b) the format of the time stamp to be written into an RFC 4379 MPLS
            Echo Reply PDU, when replying to an incoming MPLS Echo Request PDU,
            and
         c) the format to use when decoding the time stamps in an incoming MPLS
            Echo Request or MPLS Echo Reply PDU.

         'rfc4379(0)' specifies the RFC 4379 time stamp format.  The time
         stamp's 'seconds' field holds the integral number of seconds since
         1-Jan-1900 00:00:00 UTC.  The time stamp's 'microseconds' field
         contains a microseconds value in the range 0..999999.  This setting is
         used to interoperate with network elements which are fully compliant
         with RFC 4379 (e.g. an SROS system with the same setting, or any other
         RFC 4379 compliant router).

         'unix(1)' specifies the Unix time stamp format.  The time stamp's
         'seconds' field holds a 'Unix time', i.e. the integral number of
         seconds since 1-Jan-1970 00:00:00 UTC.  The time stamp's 'microseconds'
         field contains a microseconds value in the range 0..999999.  This
         setting is used to interoperate with network elements which send and
         expect a 1970-based timestamp in MPLS Echo Request/Reply PDUs (e.g. an
         SROS system with the same setting, or an SROS system running software
         earlier than R8.0 R4).

         Prior to SROS Release 8.0 R4, this object was not supported.  The Unix
         time stamp format was always used.

         This object is applicable for the following test types:
             'ldpTreeTrace',
             'lspPing',
             'lspTraceRoute',
             'p2mpLspPing',
             'p2mpLspTrace',
             'vccvPing',
             'vccvTraceRoute'."
    REFERENCE
        "RFC 4379, Feb-2006, Section 3."
    DEFVAL      { unix }
    ::= { tmnxOamGeneralObjs 1 }

tmnxOamGeneralStats              OBJECT IDENTIFIER ::= { tmnxOamGeneralObjs 2 }

tmnxOamSysPerfOprLimitTx         OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in release 21."
    ::= { tmnxOamGeneralStats 1 }

tmnxOamSysPerfCfgLimitTx         OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 21.

         Replacement objects:
             TIMETRA-OAM-PM-MIB::tmnxOamPmStsTxLimit
             TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTxLimit
             TIMETRA-OAM-TEST-MIB::tmnxOamSysTxLimit."
    ::= { tmnxOamGeneralStats 2 }

tmnxOamSysPerfCfgTotalTx         OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 21.

         Replacement objects:
             TIMETRA-OAM-PM-MIB::tmnxOamPmStsTxTotal
             TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTxTotal
             TIMETRA-OAM-TEST-MIB::tmnxOamSysTxTotal."
    ::= { tmnxOamGeneralStats 3 }

tmnxOamSysPerfLastClearedTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfLastClearedTime indicates the sysUpTime when
         the following statistics were cleared:  tmnxOamSysPerfLocalTestTx,
         tmnxOamSysPerfRemoteTestRx, and tmnxOamSysPerfReqTypeTable.  If the
         statistics have not been cleared since the last CPM restart, zero is
         returned.

         A packet count which is time stamped by this object can be converted to
         an average packets per second value using, for example,
           pps = tmnxOamSysPerfLocalTestTx /
                 [(sysUpTime - tmnxOamSysPerfLastClearedTime)/100]."
    ::= { tmnxOamGeneralStats 4 }

tmnxOamSysPerfLocalTestTx        OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "echo request packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfLocalTestTx indicates this node's total
         number of echo request packets transmitted by locally initiated tests
         (since the last clear - see TIMETRA-CLEAR-MIB::tmnxClearAction).

         Packets sent by the following test types are counted:
         1.  Any OAM or SAA test created using TIMETRA-OAM-TEST-MIB, including
             tests created using the following row status objects:
                  tmnxOamDiagCtlRowStatus
                  tmnxOamIfPingIfRowStatus
                  tmnxOamLTtraceAutoRowStatus
                  tmnxOamPingCtlRowStatus
                  tmnxOamTrCtlRowStatus
         2.  Any OAM-PM test created using TIMETRA-OAM-PM-MIB.
         3.  Background ICMP Bridged Residential Gateway ping test.
         4.  Filter redirect policy ping test.
         5.  SDP keep-alive.
         6.  Static route CPE check.
         7.  VRRP policy host unreachable ping test."
    ::= { tmnxOamGeneralStats 5 }

tmnxOamSysPerfRemoteTestRx       OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "echo request packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfRemoteTestRx indicates this node's total
         number of echo request packets received from remotely initiated tests
         (since the last clear)."
    ::= { tmnxOamGeneralStats 6 }

tmnxOamSysPerfReqTypeTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamSysPerfReqTypeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamSysPerfReqTypeTable has a row for each relevant OAM echo request
         packet type.  Each row contains packet counters."
    ::= { tmnxOamGeneralStats 7 }

tmnxOamSysPerfReqTypeEntry       OBJECT-TYPE
    SYNTAX      TmnxOamSysPerfReqTypeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Rows in tmnxOamSysPerfReqTypeTable are system-generated at CPM
         restart. Rows cannot be created or destroyed using SNMP."
    INDEX       { IMPLIED tmnxOamSysPerfReqTypeName }
    ::= { tmnxOamSysPerfReqTypeTable 1 }

TmnxOamSysPerfReqTypeEntry       ::= SEQUENCE
{
    tmnxOamSysPerfReqTypeName        TNamedItem,
    tmnxOamSysPerfReqTypeLocalTestTx Counter32,
    tmnxOamSysPerfReqTypeRemoteTstRx Counter32
}

tmnxOamSysPerfReqTypeName        OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfReqTypeName specifies the name of an echo
         request packet type (e.g. 'ICMP').  The name is the index for the row."
    ::= { tmnxOamSysPerfReqTypeEntry 1 }

tmnxOamSysPerfReqTypeLocalTestTx OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "echo request packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfReqTypeLocalTestTx indicates the number of
         echo request packets transmitted by locally initiated tests (since the
         last clear) for the echo request packet type specified by
         tmnxOamSysPerfReqTypeName."
    ::= { tmnxOamSysPerfReqTypeEntry 2 }

tmnxOamSysPerfReqTypeRemoteTstRx OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "echo request packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfReqTypeRemoteTstRx indicates the number of
         echo request packets received from remotely initiated tests (since the
         last clear) for the echo request packet type specified by
         tmnxOamSysPerfReqTypeName."
    ::= { tmnxOamSysPerfReqTypeEntry 3 }

tmnxOamSysSessionLimit           OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 21.

         Replacement objects:
             TIMETRA-OAM-PM-MIB::tmnxOamPmStsTestLimit
             TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTestLimit
             TIMETRA-OAM-TEST-MIB::tmnxOamSysTestLimit."
    ::= { tmnxOamGeneralStats 8 }

tmnxOamSysSessionCount           OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object was marked obsolete in SROS Release 21.

         Replacement objects:
             TIMETRA-OAM-PM-MIB::tmnxOamPmStsTestCount
             TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTestCount
             TIMETRA-OAM-TEST-MIB::tmnxOamSysTestCount."
    ::= { tmnxOamGeneralStats 9 }

tmnxOamSysBgIcmpBrgSessionLimit  OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysBgIcmpBrgSessionLimit indicates the maximum
         number of background ICMP Bridged Residential Gateway (BRG) OAM test
         sessions available on this node.

         Sessions are allocated and freed as described in the
         tmnxOamSysBgIcmpBrgSessionCount DESCRIPTION clause."
    ::= { tmnxOamGeneralStats 10 }

tmnxOamSysBgIcmpBrgSessionCount  OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysBgIcmpBrgSessionCount indicates the number of
         background ICMP Bridged Residential Gateway (BRG) OAM test sessions
         currently allocated on this node.

         One session is allocated when BRG functionality is administratively
         enabled on a group interface (using TIMETRA-SUBSCRIBER-MGMT-MIB::
         tmnxSubBrgIfAdminState).

         The session is freed when the BRG functionality is administratively
         disabled.

         tmnxOamSysBgIcmpBrgSessionCount will not exceed
         tmnxOamSysBgIcmpBrgSessionLimit.

         Creating a background ICMP BRG OAM test session will fail when
         tmnxOamSysBgIcmpBrgSessionCount equals
         tmnxOamSysBgIcmpBrgSessionLimit."
    ::= { tmnxOamGeneralStats 11 }

tmnxOamSysLspSelfPingSessLimit   OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysLspSelfPingSessLimit indicates the maximum
         number of LSP Self Ping sessions available on this node.

         Sessions are allocated as described in the
         tmnxOamSysLspSelfPingSessCount DESCRIPTION clause."
    ::= { tmnxOamGeneralStats 12 }

tmnxOamSysLspSelfPingSessCount   OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysLspSelfPingSessCount indicates the number of
         LSP Self Ping sessions currently allocated on this node.

         One session is allocated as required after LSP Self Ping is
         administratively enabled on an LSP (using
         TIMETRA-MPLS-MIB::vRtrMplsLspExtSelfPing).

         tmnxOamSysLspSelfPingSessCount will not exceed
         tmnxOamSysLspSelfPingSessLimit.

         Creating an LSP Self Ping session will fail when
         tmnxOamSysLspSelfPingSessCount equals tmnxOamSysLspSelfPingSessLimit."
    ::= { tmnxOamGeneralStats 13 }

tmnxOamSysPerfCfgLspSelfTxLimit  OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfCfgLspSelfTxLimit indicates this node's
         upper bound on the total configured echo request packet transmission
         rate for LSP Self Pings.  The upper bound is enforced to avoid echo
         request packet transmit overload, i.e. to ensure each enabled test can
         transmit echo request packets at the test's configured rate.

         Echo reply packets are not affected by this limit."
    ::= { tmnxOamGeneralStats 14 }

tmnxOamSysPerfCfgLspSelfTxTotal  OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysPerfCfgLspSelfTxTotal indicates this node's
         current total configured echo request packet transmission rate for LSP
         Self Pings.

         An LSP Self Ping is started as required after LSP Self Ping is
         administratively enabled on an LSP (using
         TIMETRA-MPLS-MIB::vRtrMplsLspExtSelfPing).

         The value of tmnxOamSysPerfCfgLspSelfTxTotal will not exceed the value
         of tmnxOamSysPerfCfgLspSelfTxLimit."
    ::= { tmnxOamGeneralStats 15 }

tmnxOamSysBgIcmpIfCtlSessLimit   OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysBgIcmpIfCtlSessLimit indicates the maximum
         number of Background ICMP Interface Control sessions available on this
         node.

         Sessions are allocated as described in the
         tmnxOamSysBgIcmpIfCtlSessCount DESCRIPTION clause."
    ::= { tmnxOamGeneralStats 16 }

tmnxOamSysBgIcmpIfCtlSessCount   OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "sessions"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysBgIcmpIfCtlSessCount indicates the number of
         Background ICMP Interface Control sessions currently allocated on this
         node.

         One session is allocated when Background ICMP Interface Control is
         configured on an interface (using tmnxOamIfPingIfRowStatus).

         tmnxOamSysBgIcmpIfCtlSessCount will not exceed
         tmnxOamSysBgIcmpIfCtlSessLimit.

         Creating an Background ICMP Interface Control session will fail when
         tmnxOamSysBgIcmpIfCtlSessCount equals tmnxOamSysBgIcmpIfCtlSessLimit."
    ::= { tmnxOamGeneralStats 17 }

tmnxOamSysTestLimit              OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "tests"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysTestLimit indicates this node's maximum number
         of tests with the test types listed in tmnxOamSysTestCount."
    ::= { tmnxOamGeneralStats 18 }

tmnxOamSysTestCount              OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "tests"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysTestCount indicates this nodes's total
         number of tests with the following test types:
         1.  Filter redirect policy ping test.
         2.  SDP keep-alive.
         3.  Static route CPE check.
         4.  VRRP policy host unreachable ping test.
         5.  Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.

         tmnxOamSysTestCount will not exceed tmnxOamSysTestLimit.

         Creating a test with one of the test types above will fail when
         tmnxOamSysTestCount equals tmnxOamSysTestLimit."
    ::= { tmnxOamGeneralStats 19 }

tmnxOamSysTxLimit                OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysTxLimit indicates this node's
         upper bound on the total configured echo request packet transmission
         rate for the test types listed in the tmnxOamSysTxTotal DESCRIPTION
         clause.  The upper bound is enforced to avoid echo
         request packet transmit overload, i.e. to ensure each enabled test can
         transmit echo request packets at the test's configured rate.

         Echo reply packets are not affected by this limit."
    ::= { tmnxOamGeneralStats 20 }

tmnxOamSysTxTotal                OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysTxTotal indicates this node's current
         total configured echo request packet transmission rate, for the
         following 'always on' test types:
         1.  Background ICMP Bridged Residential Gateway ping test.
         2.  Filter redirect policy ping test.
         3.  SDP keep-alive.
         4.  Static route CPE check.
         5.  VRRP policy host unreachable ping test.
         6.  SAA continuous test (see tmnxOamSaaCtlContinuous).

         The value of tmnxOamSysTxTotal will not exceed the value of
         tmnxOamSysTxLimit."
    ::= { tmnxOamGeneralStats 21 }

tmnxOamSysShareTestLimit         OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "tests"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysShareTestLimit indicates this node's maximum
         number of tests with the test types listed in
         tmnxOamSysShareTestCount."
    ::= { tmnxOamGeneralStats 22 }

tmnxOamSysShareTestCount         OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "tests"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysShareTestCount indicates this nodes's total
         number of tests with the following test types:
         1.  Filter redirect policy ping test.
         2.  SDP keep-alive.
         3.  Static route CPE check.
         4.  VRRP policy host unreachable ping test.
         5.  Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.
         6.  Any test configured using TIMETRA-OAM-PM-MIB.

         tmnxOamSysShareTestCount will not exceed tmnxOamSysShareTestLimit.

         Creating a test with one of the test types above will fail when
         tmnxOamSysShareTestCount equals tmnxOamSysShareTestLimit."
    ::= { tmnxOamGeneralStats 23 }

tmnxOamSysShareTxLimit           OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysShareTxLimit indicates this node's
         upper bound on the total configured echo request packet transmission
         rate for the test types listed in the tmnxOamSysShareTxTotal DESCRIPTION
         clause.  The upper bound is enforced to avoid echo
         request packet transmit overload, i.e. to ensure each enabled test can
         transmit echo request packets at the test's configured rate.

         Echo reply packets are not affected by this limit."
    ::= { tmnxOamGeneralStats 24 }

tmnxOamSysShareTxTotal           OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "echo request packets per second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamSysShareTxTotal indicates this node's current
         total configured echo request packet transmission rate, for the
         following 'always on' test types:
         1.  Background ICMP Bridged Residential Gateway ping test.
         2.  Filter redirect policy ping test.
         3.  SDP keep-alive.
         4.  Static route CPE check.
         5.  VRRP policy host unreachable ping test.
         6.  SAA continuous test (see tmnxOamSaaCtlContinuous).
         7.  OAM-PM proactive tests (e.g. a test created using
             TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmRowStatus with
             TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessType = 'proactive(1)').

         The value of tmnxOamSysShareTxTotal will not exceed the value of
         tmnxOamSysShareTxLimit."
    ::= { tmnxOamGeneralStats 25 }

tmnxOamMplsEchoDownstreamMapTlv  OBJECT-TYPE
    SYNTAX      TmnxOamMplsEchoDownMapTlv
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamMplsEchoDownstreamMapTlv specifies the system
         value for the type of downstream map TLV to be inserted when launching
         MPLS echo requests.

         The value of tmnxOamMplsEchoDownstreamMapTlv is used on three
         occasions:

         1.  When a background LDP tree trace test is started (using
         tmnxOamLTtraceAutoAdminState), the value of
         tmnxOamMplsEchoDownstreamMapTlv specifies the type of downstream map
         TLV used during the test.

         2.  When a test of type 'lspTraceRoute' is created, with no value
         specified for the test's tmnxOamLspTrCtlDownstreamMapTlv object,
         tmnxOamLspTrCtlDownstreamMapTlv is set to the value of
         tmnxOamMplsEchoDownstreamMapTlv.

         3.  When a test of type 'ldpTreeTrace' is created, with no value
         specified for the test's tmnxOamLTtraceCtlDownstreamMpTlv object,
         tmnxOamLTtraceCtlDownstreamMpTlv is set to the value of
         tmnxOamMplsEchoDownstreamMapTlv.

         Example usage, for the second and third cases:  suppose every node in
         this node's network supports the MPLS Echo Request/Reply DDMAP TLV, and
         the network operator wishes to use the enhanced functionality offered
         by the DDMAP TLV.  Then, setting tmnxOamMplsEchoDownstreamMapTlv to
         'ddmap(2)' simplifies configuration.  The simplification:  the
         tmnxOamLspTrCtlDownstreamMapTlv and tmnxOamLTtraceCtlDownstreamMpTlv
         objects need not be set when creating tests."
    DEFVAL      { dsmap }
    ::= { tmnxOamGeneralObjs 3 }

tmnxOamDiagObjs                  OBJECT IDENTIFIER ::= { tmnxOamTestObjs 6 }

tmnxOamDiagCtlTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamDiagCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamDiagCtlTable contains configuration information for diagnostic
         tests.

         tmnxOamPingCtlTable and tmnxOamTrCtlTable fill the same role for ping
         tests and trace route tests, respectively."
    ::= { tmnxOamDiagObjs 1 }

tmnxOamDiagCtlEntry              OBJECT-TYPE
    SYNTAX      TmnxOamDiagCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamDiagCtlEntry contains configuration information for one
         diagnostic test.

         Rows are created/destroyed using tmnxOamDiagCtlRowStatus."
    INDEX       {
        tmnxOamDiagCtlOwnerIndex,
        tmnxOamDiagCtlTestIndex
    }
    ::= { tmnxOamDiagCtlTable 1 }

TmnxOamDiagCtlEntry              ::= SEQUENCE
{
    tmnxOamDiagCtlOwnerIndex         SnmpAdminString,
    tmnxOamDiagCtlTestIndex          SnmpAdminString,
    tmnxOamDiagCtlRowStatus          RowStatus,
    tmnxOamDiagCtlLastChanged        TimeStamp,
    tmnxOamDiagCtlTestMode           INTEGER,
    tmnxOamDiagCtlAdminState         TmnxEnabledDisabled
}

tmnxOamDiagCtlOwnerIndex         OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamDiagCtlOwnerIndex specifies the owner name of the
         test."
    ::= { tmnxOamDiagCtlEntry 1 }

tmnxOamDiagCtlTestIndex          OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamDiagCtlTestIndex specifies the test name of the
         test.

         The test is identified by the owner name and the test name.  One owner
         typically owns several tests.  This indexing method ensures tests
         created by several owners have unique indices."
    ::= { tmnxOamDiagCtlEntry 2 }

tmnxOamDiagCtlRowStatus          OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamDiagCtlRowStatus specifies the row status of the
         specified test."
    ::= { tmnxOamDiagCtlEntry 3 }

tmnxOamDiagCtlLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamDiagCtlLastChanged indicates the most recent time
         the value of a writable object in this row was modified."
    ::= { tmnxOamDiagCtlEntry 4 }

tmnxOamDiagCtlTestMode           OBJECT-TYPE
    SYNTAX      INTEGER {
        none           (0),
        findEgressDiag (1)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamDiagCtlTestMode specifies the type of OAM
         diagnostic test defined by this row.

         Code Points
         ------------------------------------------------------------------
         none           - the test type is unspecified
         findEgressDiag - find the egress port, etc, for a user-configured
                          packet

         The support for Service Assurance Agent (SAA) tests (i.e. tests with
         tmnxOamSaaCtlTable rows) and OAM tests (i.e. tests without
         tmnxOamSaaCtlTable rows) varies with the test type, as shown in the
         following table.

         tmnxOamDiagCtlTestMode   SAA Supported   OAM Supported
         ----------------------   -------------   -------------
         'findEgressDiag'                    No             Yes"
    DEFVAL      { none }
    ::= { tmnxOamDiagCtlEntry 5 }

tmnxOamDiagCtlAdminState         OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamDiagCtlAdminState specifies the administrative
         state of the test.

         Setting this object to 'enabled(1)' starts the test.

         When the test completes, SROS sets this object to 'disabled(2)'."
    DEFVAL      { disabled }
    ::= { tmnxOamDiagCtlEntry 6 }

tmnxOamFindEgrDiagCtlTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamFindEgrDiagCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamFindEgrDiagCtlTable contains configuration information for
         diagnostic tests with type 'findEgressDiag(1)'."
    ::= { tmnxOamDiagObjs 2 }

tmnxOamFindEgrDiagCtlEntry       OBJECT-TYPE
    SYNTAX      TmnxOamFindEgrDiagCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamFindEgrDiagCtlEntry contains configuration information for one
         diagnostic test with type 'findEgressDiag(1)'.

         A row is created when tmnxOamDiagCtlTestMode is set to
         'findEgressDiag(1)'.

         A row is destroyed when the corresponding tmnxOamDiagCtlTable row is
         destroyed."
    INDEX       {
        tmnxOamDiagCtlOwnerIndex,
        tmnxOamDiagCtlTestIndex
    }
    ::= { tmnxOamFindEgrDiagCtlTable 1 }

TmnxOamFindEgrDiagCtlEntry       ::= SEQUENCE
{
    tmnxOamFindEgrDiagCtlLastChanged TimeStamp,
    tmnxOamFindEgrDiagCtlPacketNum   Unsigned32,
    tmnxOamFindEgrDiagCtlIngPortId   TmnxPortID
}

tmnxOamFindEgrDiagCtlLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagCtlLastChanged indicates the most
         recent time the value of a writable object in this row was modified."
    ::= { tmnxOamFindEgrDiagCtlEntry 1 }

tmnxOamFindEgrDiagCtlPacketNum   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagCtlPacketNum specifies the packet
         number to be used for the test.

         Zero specifies no packet has been configured.

         The test will fail if the packet number is not defined in
         tmnxOamBuildPktCtlTable."
    DEFVAL      { 0 }
    ::= { tmnxOamFindEgrDiagCtlEntry 2 }

tmnxOamFindEgrDiagCtlIngPortId   OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagCtlIngPortId specifies the ingress port
         to be used for the test.

         The null port identifier 0x1e000000 specifies no port has been
         configured.

         The test will fail if the port identifier is not defined in
         TIMETRA-PORT-MIB::tmnxPortTable.

         The test will fail if the port identifier does not identify a physical
         port.  For example, the test will fail if the port identifier
         identifies a Link Aggregation Group (LAG)."
    DEFVAL      { '1e000000'H }
    ::= { tmnxOamFindEgrDiagCtlEntry 3 }

tmnxOamFindEgrDiagResultsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamFindEgrDiagResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamFindEgrDiagResultsTable contains test results for the OAM
         Egress Finder."
    ::= { tmnxOamDiagObjs 3 }

tmnxOamFindEgrDiagResultsEntry   OBJECT-TYPE
    SYNTAX      TmnxOamFindEgrDiagResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamFindEgrDiagResultsEntry contains the test results for one OAM
         diagnostic test with tmnxOamDiagCtlTestMode = 'findEgressDiag(1)'.

         A row is created when a 'findEgressDiag(1)' test is enabled (using
         tmnxOamDiagCtlAdminStatus).

         A row is destroyed when:
         1.  The corresponding test configuration is destroyed (using
         tmnxOamDiagCtlRowStatus), or
         2.  Results are cleared for the test (using
         TIMETRA-CLEAR-MIB::tmnxClearAction), or
         3.  A new run result is available, and the limit on the number of
         run results retained (3, currently) has been reached.  In that case,
         the oldest run result row is destroyed."
    INDEX       {
        tmnxOamDiagCtlOwnerIndex,
        tmnxOamDiagCtlTestIndex,
        tmnxOamDiagResultsTestRunIndex
    }
    ::= { tmnxOamFindEgrDiagResultsTable 1 }

TmnxOamFindEgrDiagResultsEntry   ::= SEQUENCE
{
    tmnxOamDiagResultsTestRunIndex   Unsigned32,
    tmnxOamFindEgrDiagOperState      TmnxEnabledDisabled,
    tmnxOamFindEgrDiagEgressPort     TmnxPortID,
    tmnxOamFindEgrDiagEgrRtrInstName TLNamedItemOrEmpty,
    tmnxOamFindEgrDiagEgressIfName   TNamedItemOrEmpty,
    tmnxOamFindEgrDiagNextHopAddrTyp InetAddressType,
    tmnxOamFindEgrDiagNextHopAddress InetAddress
}

tmnxOamDiagResultsTestRunIndex   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamDiagResultsTestRunIndex specifies the test run
         number for this row.

         The first run of a test (as identified by tmnxOamDiagCtlOwnerIndex and
         tmnxOamDiagCtlTestIndex) is assigned run index 1.  Subsequent run
         index values are assigned sequentially."
    ::= { tmnxOamFindEgrDiagResultsEntry 1 }

tmnxOamFindEgrDiagOperState      OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagOperState indicates the operational
         state of the test.  'enabled(1)' indicates the test is running."
    ::= { tmnxOamFindEgrDiagResultsEntry 2 }

tmnxOamFindEgrDiagEgressPort     OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagEgressPort indicates the egress port
         selected by SROS for the specified test.  This is the main test result
         of the OAM Egress Finder.

         The null port identifier 0x1e000000 is returned when:
         1.  The test run is not complete (see tmnxOamFindEgrDiagOperState), or
         2.  The test run failed."
    ::= { tmnxOamFindEgrDiagResultsEntry 3 }

tmnxOamFindEgrDiagEgrRtrInstName OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagEgrRtrInstName indicates the name of
         the egress service or egress router instance selected by SROS for the
         specified test.

         SROS provides one of the following values:
         1.  '' (i.e. the empty string),
         2.  'Base',
         3.  A VPRN service name (i.e. a TIMETRA-SERV-MIB::svcName, with
             TIMETRA-SERV-MIB::svcType = 'vprn(4)').

         The empty string is returned when the egress service or egress router
         instance was not found (e.g. because the test failed)."
    ::= { tmnxOamFindEgrDiagResultsEntry 4 }

tmnxOamFindEgrDiagEgressIfName   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagEgressIfName indicates the egress
         interface name selected by SROS for the specified test.

         tmnxOamFindEgrDiagEgrRtrInstName and tmnxOamFindEgrDiagEgressIfName
         uniquely identify an interface.

         The empty string is returned when the egress interface name was not
         found (e.g. because the test failed)."
    ::= { tmnxOamFindEgrDiagResultsEntry 5 }

tmnxOamFindEgrDiagNextHopAddrTyp OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagNextHopAddrTyp indicates the address
         type of tmnxOamFindEgrDiagNextHopAddress.

         'unknown(0)' is returned when the next hop address was not found (e.g.
         because the test failed)."
    ::= { tmnxOamFindEgrDiagResultsEntry 6 }

tmnxOamFindEgrDiagNextHopAddress OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamFindEgrDiagNextHopAddress indicates the next hop
         address selected by SROS for the specified test."
    ::= { tmnxOamFindEgrDiagResultsEntry 7 }

tmnxOamBuildPktCtlTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktCtlTable contains the definition of all the packets
         used by the OAM Egress Finder.

         The OAM Egress Finder computes the egress routing (e.g. the egress
         port) used by a packet sent with a configured set of packet headers
         (e.g. an Ethernet header, an IPv4 header, and a UDP header).

         The finder is particularly useful when the egress port is a member of a
         Link Aggregation Group (LAG) or part of an Equal-Cost Multi-Path
         routing (ECMP) configuration.  In the ECMP and LAG cases, SROS chooses
         the egress port for a packet using a hash calculation on the packet
         headers, making a tool useful for computing the egress routing."
    ::= { tmnxOamDiagObjs 4 }

tmnxOamBuildPktCtlEntry          OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktCtlEntry contains the definition of one packet used by
         the OAM Egress Finder.

         Rows are created and destroyed using tmnxOamBuildPktRowStatus."
    INDEX       { tmnxOamBuildPktNum }
    ::= { tmnxOamBuildPktCtlTable 1 }

TmnxOamBuildPktCtlEntry          ::= SEQUENCE
{
    tmnxOamBuildPktNum               Unsigned32,
    tmnxOamBuildPktRowStatus         RowStatus,
    tmnxOamBuildPktLastChanged       TimeStamp,
    tmnxOamBuildPktHeaderSeq         DisplayString
}

tmnxOamBuildPktNum               OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktNum specifies the packet number of the row
         to be configured."
    ::= { tmnxOamBuildPktCtlEntry 1 }

tmnxOamBuildPktRowStatus         OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktRowStatus specifies the row status of the
         specified packet."
    ::= { tmnxOamBuildPktCtlEntry 2 }

tmnxOamBuildPktLastChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktLastChanged indicates the most recent time
         the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktCtlEntry 3 }

tmnxOamBuildPktHeaderSeq         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..153))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktHeaderSeq specifies the sequence of packet
         headers that make up the specified packet.  The sequence is defined
         using an ASCII string.   Packet headers are defined in
         tmnxOamBuildPktHdrCtlTable.

         For example, suppose tmnxOamBuildPktHdrCtlTable contains the following
         values.

         tmnxOamBuildPktHeaderNum   tmnxOamBuildPktHdrType
         ------------------------   ----------------------
         7                                      'ethernet'
         99                                         'ipv4'
         255                                         'udp'

         Then, the header sequence string 'h7/h99/h255' specifies a packet with
         a UDP PDU within an IPv4 PDU within an Ethernet frame.

         A header sequence can refer to at most 22 headers."
    DEFVAL      { "" }
    ::= { tmnxOamBuildPktCtlEntry 4 }

tmnxOamBuildPktHdrCtlTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktHdrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktHdrCtlTable contains the header type of all the
         configured packet headers used by the OAM Egress Finder."
    ::= { tmnxOamDiagObjs 5 }

tmnxOamBuildPktHdrCtlEntry       OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktHdrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktHdrCtlEntry contains the header type (e.g. 'dot1q') of
         one configured header used by the OAM Egress Finder.

         Rows are created and destroyed using tmnxOamBuildPktHdrRowStatus."
    INDEX       { tmnxOamBuildPktHeaderNum }
    ::= { tmnxOamBuildPktHdrCtlTable 1 }

TmnxOamBuildPktHdrCtlEntry       ::= SEQUENCE
{
    tmnxOamBuildPktHeaderNum         Unsigned32,
    tmnxOamBuildPktHdrRowStatus      RowStatus,
    tmnxOamBuildPktHdrLastChanged    TimeStamp,
    tmnxOamBuildPktHdrType           TmnxOamBuildPktHeaderType
}

tmnxOamBuildPktHeaderNum         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktHeaderNum specifies the header number of
         the row to be configured."
    ::= { tmnxOamBuildPktHdrCtlEntry 1 }

tmnxOamBuildPktHdrRowStatus      OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktHdrRowStatus specifies the row status of
         the specified header."
    ::= { tmnxOamBuildPktHdrCtlEntry 2 }

tmnxOamBuildPktHdrLastChanged    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktHdrLastChanged indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktHdrCtlEntry 3 }

tmnxOamBuildPktHdrType           OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktHeaderType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktHdrType specifies the type of the
         specified packet header."
    DEFVAL      { none }
    ::= { tmnxOamBuildPktHdrCtlEntry 4 }

tmnxOamBuildPktHdrOvrCtlTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktHdrOvrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktHdrOvrCtlTable contains the set of packet header
         overrides for the OAM Egress Finder."
    ::= { tmnxOamDiagObjs 6 }

tmnxOamBuildPktHdrOvrCtlEntry    OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktHdrOvrCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktHdrOvrCtlEntry contains the definition of one packet
         header override used by the OAM Egress Finder.

         Rows are created and destroyed using tmnxOamBuildPktHdrOvrRowStatus."
    INDEX       {
        tmnxOamBuildPktNum,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktHdrOvrCtlTable 1 }

TmnxOamBuildPktHdrOvrCtlEntry    ::= SEQUENCE
{
    tmnxOamBuildPktHdrOvrRowStatus   RowStatus,
    tmnxOamBuildPktHdrOvrLastChanged TimeStamp
}

tmnxOamBuildPktHdrOvrRowStatus   OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktHdrOvrRowStatus specifies the row status
         of the specified packet header override."
    ::= { tmnxOamBuildPktHdrOvrCtlEntry 1 }

tmnxOamBuildPktHdrOvrLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktHdrOvrLastChanged indicates the most
         recent time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktHdrOvrCtlEntry 2 }

tmnxOamBuildPktEthCtlTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktEthCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktEthCtlTable contains the values of Ethernet header
         fields used by the OAM Egress Finder."
    ::= { tmnxOamDiagObjs 7 }

tmnxOamBuildPktEthCtlEntry       OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktEthCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktEthCtlEntry contains the definition of one Ethernet
         header used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing an
         Ethernet header (e.g. Source MAC) are present.  The other Ethernet
         header fields (e.g. Frame Check Sequence) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'ethernet', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with
             type 'ethernet'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'ethernet' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'ethernet' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the Ethernet header is
         a base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base Source MAC field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   Src MAC Addr
         ---------------   ----------   -----------------
         0                          1   00:11:22:33:44:55
         10                         1   00:12:34:56:78:9a
         255                        1   00:AA:BB:CC:DD:EE"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktEthCtlTable 1 }

TmnxOamBuildPktEthCtlEntry       ::= SEQUENCE
{
    tmnxOamBuildPktNumOrZero         Unsigned32,
    tmnxOamBuildPktEthLastChanged    TimeStamp,
    tmnxOamBuildPktEthDstMacAddr     MacAddress,
    tmnxOamBuildPktEthSrcMacAddr     MacAddress
}

tmnxOamBuildPktNumOrZero         OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktNumOrZero specifies the packet number of
         the row to be configured.

         A zero specifies a row for a base header definition.

         A non-zero value specifies a row for an override header definition.

         When building a packet to be tested, a matching override definition
         (if any) is used instead of a base definition."
    ::= { tmnxOamBuildPktEthCtlEntry 1 }

tmnxOamBuildPktEthLastChanged    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktEthLastChanged indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktEthCtlEntry 2 }

tmnxOamBuildPktEthDstMacAddr     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktEthDstMacAddr specifies the Destination
         MAC Address field of the specified Ethernet header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is
         00:00:00:00:00:00.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is
         FF:FF:FF:FF:FF:FF.  That indicates an unspecified override."
    ::= { tmnxOamBuildPktEthCtlEntry 3 }

tmnxOamBuildPktEthSrcMacAddr     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktEthSrcMacAddr specifies the Source MAC
         Address field of the specified Ethernet header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is
         00:00:00:00:00:00.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is
         FF:FF:FF:FF:FF:FF.  That indicates an unspecified override."
    ::= { tmnxOamBuildPktEthCtlEntry 4 }

tmnxOamBuildPktIpCtlTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktIpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktIpCtlTable contains the values of IP header fields used
         by the OAM Egress Finder."
    REFERENCE
        "RFC 791, 'INTERNET PROTOCOL DARPA INTERNET PROGRAM PROTOCOL
         SPECIFICATION', Section 3.1 'Internet Header Format'.
         RFC 8200, 'Internet Protocol, Version 6 (IPv6) Specification'."
    ::= { tmnxOamDiagObjs 8 }

tmnxOamBuildPktIpCtlEntry        OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktIpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktIpCtlEntry contains the definition of one IP header
         used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing
         an IP header (e.g. Source IP Address) are present.  The other IP
         header fields (e.g. Time to Live) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'ipv4'|'ipv6', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with
             type 'ipv4'|'ipv6'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'ipv4'|'ipv6' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'ipv4'|'ipv6' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the IP header is
         a base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base Source IP Address field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   Source IP Address
         ---------------   ----------   -----------------
         0                          1                1::2
         10                         1                2::3
         255                        1                3::4"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktIpCtlTable 1 }

TmnxOamBuildPktIpCtlEntry        ::= SEQUENCE
{
    tmnxOamBuildPktIpLastChanged     TimeStamp,
    tmnxOamBuildPktIpDstIpAddrType   InetAddressType,
    tmnxOamBuildPktIpDstIpAddress    InetAddress,
    tmnxOamBuildPktIpSrcIpAddrType   InetAddressType,
    tmnxOamBuildPktIpSrcIpAddress    InetAddress,
    tmnxOamBuildPktIpDscp            TDSCPNameOrEmpty,
    tmnxOamBuildPktIPv4MoreFragments Integer32
}

tmnxOamBuildPktIpLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIpLastChanged indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktIpCtlEntry 1 }

tmnxOamBuildPktIpDstIpAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIpDstIpAddrType specifies the address type
         of tmnxOamBuildPktIpDstIpAddress."
    ::= { tmnxOamBuildPktIpCtlEntry 2 }

tmnxOamBuildPktIpDstIpAddress    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIpDstIpAddress specifies the Destination
         IP Address field of the specified IP header.

         The default value varies, as follows.
         1.  If the hosting row is a header definition (i.e.
         tmnxOamBuildPktNumOrZero is zero):
         a) if the parent tmnxOamBuildPktHdrType is 'ipv4', the
         default is the 'ipv4(1)' address 0.0.0.0.
         b) if the parent tmnxOamBuildPktHdrType is 'ipv6', the
         default is the 'ipv6(2)' address 0::0.
         2.  If the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default is the
         'unknown(0)' address.  That indicates an unspecified override."
    ::= { tmnxOamBuildPktIpCtlEntry 3 }

tmnxOamBuildPktIpSrcIpAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIpSrcIpAddrType specifies the address type
         of tmnxOamBuildPktIpSrcIpAddress."
    ::= { tmnxOamBuildPktIpCtlEntry 4 }

tmnxOamBuildPktIpSrcIpAddress    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIpSrcIpAddress specifies the Source IP
         Address field of the specified IP header.

         The default value varies, as follows.
         1.  If the hosting row is a header definition (i.e.
         tmnxOamBuildPktNumOrZero is zero):
         a) if the parent tmnxOamBuildPktHdrType is 'ipv4', the
         default is the 'ipv4(1)' address 0.0.0.0.
         b) if the parent tmnxOamBuildPktHdrType is 'ipv6', the
         default is the 'ipv6(2)' address 0::0.
         2.  If the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default is the
         'unknown(0)' address.  That indicates an unspecified override."
    ::= { tmnxOamBuildPktIpCtlEntry 5 }

tmnxOamBuildPktIpDscp            OBJECT-TYPE
    SYNTAX      TDSCPNameOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIpDscp specifies the Differentiated
         Services Code Point (DSCP) field of the specified IP header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 'be'.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is ''. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktIpCtlEntry 6 }

tmnxOamBuildPktIPv4MoreFragments OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIPv4MoreFragments specifies the More
         Fragments (MF) flag for the specified IPv4 header.

         If the header type is IPv6, this object is irrelevant and cannot be
         changed away from default.  An IPv6 Fragment Header (i.e.
         tmnxOamBuildPktHdrType = 'ipv6Fragment') is used to configure
         fragmentation for an IPv6 packet.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktIpCtlEntry 7 }

tmnxOamBuildPktTcpUdpCtlTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktTcpUdpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktTcpUdpCtlTable contains the values of TCP|UDP header
         fields used by the OAM Egress Finder."
    ::= { tmnxOamDiagObjs 9 }

tmnxOamBuildPktTcpUdpCtlEntry    OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktTcpUdpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktTcpUdpCtlEntry contains the definition of one TCP|UDP
         header used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing a
         TCP|UDP header (e.g. Source Port) are present.  The other TCP|UDP
         header fields (e.g. Checksum) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'tcp'|'udp', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with type
             'tcp'|'udp'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'tcp'|'udp' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'tcp'|'udp' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the TCP|UDP header is
         a base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base Source Port field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   Source Port
         ---------------   ----------   -----------
         0                          1         65532
         10                         1         65533
         255                        1         65534"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktTcpUdpCtlTable 1 }

TmnxOamBuildPktTcpUdpCtlEntry    ::= SEQUENCE
{
    tmnxOamBuildPktTcpUdpLastChanged TimeStamp,
    tmnxOamBuildPktTcpUdpDstPort     Integer32,
    tmnxOamBuildPktTcpUdpSrcPort     Integer32
}

tmnxOamBuildPktTcpUdpLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktTcpUdpLastChanged indicates the most
         recent time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktTcpUdpCtlEntry 1 }

tmnxOamBuildPktTcpUdpDstPort     OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktTcpUdpDstPort specifies the TCP|UDP
         Destination Port field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktTcpUdpCtlEntry 2 }

tmnxOamBuildPktTcpUdpSrcPort     OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktTcpUdpSrcPort specifies the TCP|UDP Source
         Port field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktTcpUdpCtlEntry 3 }

tmnxOamBuildPktDot1qCtlTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktDot1qCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktDot1qCtlTable contains the values of IEEE 802.1Q header
         fields used by the OAM Egress Finder."
    REFERENCE
        "IEEE 802.1Q-2014 - IEEE Standard for Local and Metropolitan Area
         Networks -- Bridges and Bridged Networks."
    ::= { tmnxOamDiagObjs 10 }

tmnxOamBuildPktDot1qCtlEntry     OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktDot1qCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktDot1qCtlEntry contains the definition of one IEEE
         802.1Q header used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing an
         IEEE 802.1Q header (e.g. VLAN ID) are present.  The other IEEE 802.1Q
         header fields (e.g. Drop Eligible Indicator (DEI)) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'dot1q', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with
             type 'dot1q'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'dot1q' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'dot1q' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the IEEE 802.1Q header
         is a base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base VLAN ID field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   VLAN ID
         ---------------   ----------   -------
         0                          1      4092
         10                         1      4093
         255                        1      4094"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktDot1qCtlTable 1 }

TmnxOamBuildPktDot1qCtlEntry     ::= SEQUENCE
{
    tmnxOamBuildPktDot1qLastChanged  TimeStamp,
    tmnxOamBuildPktDot1qPrioCodePt   Integer32,
    tmnxOamBuildPktDot1qTagProtoId   Integer32,
    tmnxOamBuildPktDot1qVlanId       Integer32
}

tmnxOamBuildPktDot1qLastChanged  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktDot1qLastChanged indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktDot1qCtlEntry 1 }

tmnxOamBuildPktDot1qPrioCodePt   OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktDot1qPrioCodePt specifies the IEEE 802.1Q
         Priority Code Point field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktDot1qCtlEntry 2 }

tmnxOamBuildPktDot1qTagProtoId   OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 1536..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktDot1qTagProtoId specifies the IEEE 802.1Q
         Tag Protocol Identifier (TPID) field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0x8100 (i.e.
         33024 decimal).

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktDot1qCtlEntry 3 }

tmnxOamBuildPktDot1qVlanId       OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktDot1qVlanId specifies the IEEE 802.1Q VLAN
         Identifier field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktDot1qCtlEntry 4 }

tmnxOamBuildPktIPsecAuthCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktIPsecAuthCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktIPsecAuthCtlTable contains the values of IPsec
         Authentication Header fields used by the OAM Egress Finder."
    REFERENCE
        "RFC 4302, 'IP Authentication Header'."
    ::= { tmnxOamDiagObjs 11 }

tmnxOamBuildPktIPsecAuthCtlEntry OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktIPsecAuthCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktIPsecAuthCtlEntry contains the definition of one IPsec
         Authentication Header used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing an
         IPsec Authentication Header (e.g. Security Parameters Index (SPI)) are
         present.  The other IPsec Authentication Header fields (e.g. Sequence
         Number) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'ipsecAuth', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with type
             'ipsecAuth'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'ipsecAuth' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'ipsecAuth' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the IPsec
         Authentication Header is a base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base SPI field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   SPI
         ---------------   ----------   ----------
         0                          1   4123456789
         10                         1   4123456790
         255                        1   4123456791"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktIPsecAuthCtlTable 1 }

TmnxOamBuildPktIPsecAuthCtlEntry ::= SEQUENCE
{
    tmnxOamBuildPktIPsecAuthLastChgd TimeStamp,
    tmnxOamBuildPktIPsecAuthSecPrIdx Unsigned32
}

tmnxOamBuildPktIPsecAuthLastChgd OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIPsecAuthLastChgd indicates the most
         recent time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktIPsecAuthCtlEntry 1 }

tmnxOamBuildPktIPsecAuthSecPrIdx OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..4294967295)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktIPsecAuthSecPrIdx specifies the IPsec
         Authentication Security Parameters Index (SPI) field of the specified
         header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 1.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is 0.
         That indicates an unspecified override.  Zero is an unsupported
         value in an IPsec Authentication Header SPI field."
    ::= { tmnxOamBuildPktIPsecAuthCtlEntry 2 }

tmnxOamBuildPktPbbCtlTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktPbbCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktPbbCtlTable contains the values of Provider Backbone
         (PBB) header fields used by the OAM Egress Finder."
    REFERENCE
        "IEEE Std 802.1Q-2014, 'IEEE Standard for Local and Metropolitan Area
         Networks - Bridges and Bridged Networks', Section 9.7 'Backbone Service
         Instance Tag Control Information (I-TAG TCI)'."
    ::= { tmnxOamDiagObjs 12 }

tmnxOamBuildPktPbbCtlEntry       OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktPbbCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktPbbCtlEntry contains the definition of one PBB header
         used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing a PBB
         header (e.g. Backbone Service Instance Identifier (I-SID)) are
         present.  The other PBB header fields (e.g. Priority Code Point
         (I-PCP)) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'pbb', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with type
             'pbb'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'pbb' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'pbb' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the PBB header is a
         base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base I-SID field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   I-SID
         ---------------   ----------   --------
         0                          1   16777213
         10                         1   16777214
         255                        1   16777215"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktPbbCtlTable 1 }

TmnxOamBuildPktPbbCtlEntry       ::= SEQUENCE
{
    tmnxOamBuildPktPbbLastChanged    TimeStamp,
    tmnxOamBuildPktPbbIsid           Integer32,
    tmnxOamBuildPktPbbTagProtocolId  Integer32
}

tmnxOamBuildPktPbbLastChanged    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktPbbLastChanged indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktPbbCtlEntry 1 }

tmnxOamBuildPktPbbIsid           OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..16777215)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktPbbIsid specifies the PBB Backbone Service
         Instance Identifier (I-SID) field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktPbbCtlEntry 2 }

tmnxOamBuildPktPbbTagProtocolId  OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 1536..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktPbbTagProtocolId specifies the PBB Tag
         Protocol Identifier (TPID) field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0x88E7 (i.e.
         35047 decimal).

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktPbbCtlEntry 3 }

tmnxOamBuildPktL2tpCtlTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktL2tpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktL2tpCtlTable contains the values of Layer 2 Tunneling
         Protocol (L2TP) header fields used by the OAM Egress Finder."
    REFERENCE
        "RFC 2661, 'Layer Two Tunneling Protocol', August, 1999."
    ::= { tmnxOamDiagObjs 13 }

tmnxOamBuildPktL2tpCtlEntry      OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktL2tpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktL2tpCtlEntry contains the definition of one L2TP header
         used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing an
         L2TP header (e.g. Tunnel ID) are present.  The other L2TP header fields
         (e.g. Version) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'l2tp', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with type
             'l2tp'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'l2tp' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'l2tp' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the L2TP header is a
         base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base Tunnel ID field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   Tunnel ID
         ---------------   ----------   ---------
         0                          1       65533
         10                         1       65534
         255                        1       65535"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktL2tpCtlTable 1 }

TmnxOamBuildPktL2tpCtlEntry      ::= SEQUENCE
{
    tmnxOamBuildPktL2tpLastChanged   TimeStamp,
    tmnxOamBuildPktL2tpSessionId     Integer32,
    tmnxOamBuildPktL2tpTunnelId      Integer32
}

tmnxOamBuildPktL2tpLastChanged   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktL2tpLastChanged indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktL2tpCtlEntry 1 }

tmnxOamBuildPktL2tpSessionId     OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktL2tpSessionId specifies the L2TP Session
         ID field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktL2tpCtlEntry 2 }

tmnxOamBuildPktL2tpTunnelId      OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktL2tpTunnelId specifies the L2TP Tunnel ID
         field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktL2tpCtlEntry 3 }

tmnxOamBuildPktMplsCtlTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktMplsCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktMplsCtlTable contains the values of MPLS header fields
         used by the OAM Egress Finder."
    ::= { tmnxOamDiagObjs 14 }

tmnxOamBuildPktMplsCtlEntry      OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktMplsCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktMplsCtlEntry contains the definition of one MPLS header
         used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing an
         MPLS header (e.g. MPLS Label) are present.  The other MPLS header
         fields (e.g. Bottom of Stack) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'mpls', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with
             type 'mpls'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'mpls' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'mpls' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the MPLS header
         is a base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base MPLS Label field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   MPLS Label
         ---------------   ----------   ----------
         0                          1      1048573
         10                         1      1048574
         255                        1      1048575"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktMplsCtlTable 1 }

TmnxOamBuildPktMplsCtlEntry      ::= SEQUENCE
{
    tmnxOamBuildPktMplsLastChanged   TimeStamp,
    tmnxOamBuildPktMplsLabel         Integer32,
    tmnxOamBuildPktMplsTrafficClass  Integer32
}

tmnxOamBuildPktMplsLastChanged   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktMplsLastChanged indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktMplsCtlEntry 1 }

tmnxOamBuildPktMplsLabel         OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..1048575)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktMplsLabel specifies the MPLS Label field
         of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktMplsCtlEntry 2 }

tmnxOamBuildPktMplsTrafficClass  OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktMplsTrafficClass specifies the MPLS
         Traffic Class field of the specified header.

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default value is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That
         indicates an unspecified override."
    ::= { tmnxOamBuildPktMplsCtlEntry 3 }

tmnxOamBuildPktGtpUserCtlTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamBuildPktGtpUserCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktGtpUserCtlTable contains the values of GTP User (GTP-U)
         version 1 header fields used by the OAM Egress Finder."
    REFERENCE
        "ETSI TS 129 281 V8.0.0, 'GPRS Tunnelling Protocol for User Plane
         (GTPv1-U)'."
    ::= { tmnxOamDiagObjs 15 }

tmnxOamBuildPktGtpUserCtlEntry   OBJECT-TYPE
    SYNTAX      TmnxOamBuildPktGtpUserCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamBuildPktGtpUserCtlEntry contains the definition of one GTP-U
         header used by the OAM Egress Finder.

         Fields that influence the routing by SROS of a packet containing a
         GTP-U header (e.g. Tunnel Endpoint Identifier (TEID)) are present. The
         other GTP-U header fields (e.g. Message Type) are absent.

         A row is created by SROS when:
         1.  tmnxOamBuildPktHdrType is set to 'gtpUser', OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
             tmnxOamBuildPktHeaderNum index which refers to a header with type
             'gtpUser'.

         A row is destroyed by SROS when:
         1.  A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
             'gtpUser' is destroyed, OR
         2.  A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
             type 'gtpUser' is destroyed.

         A row created using creation clause 1, above, has the index object
         tmnxOamBuildPktNumOrZero=0.  The zero indicates the GTP-U Header is a
         base definition (not an override).

         A row created using creation clause 2, above, has
         tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
         parent tmnxOamBuildPktHdrOvrCtlTable row.

         The following example values for this table show the definition of a
         base TEID field for header 1, and two overrides.

         Pkt Num Or Zero   Header Num   TEID
         ---------------   ----------   ----------
         0                          1   4123456789
         10                         1   4123456790
         255                        1   4123456791"
    INDEX       {
        tmnxOamBuildPktNumOrZero,
        tmnxOamBuildPktHeaderNum
    }
    ::= { tmnxOamBuildPktGtpUserCtlTable 1 }

TmnxOamBuildPktGtpUserCtlEntry   ::= SEQUENCE
{
    tmnxOamBuildPktGtpUserLastChgd   TimeStamp,
    tmnxOamBuildPktGtpUserTunnEpIdHi TmnxHigh32,
    tmnxOamBuildPktGtpUserTunnEpIdLo TmnxLow32
}

tmnxOamBuildPktGtpUserLastChgd   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktGtpUserLastChgd indicates the most recent
         time the value of a writable object in this row was modified."
    ::= { tmnxOamBuildPktGtpUserCtlEntry 1 }

tmnxOamBuildPktGtpUserTunnEpIdHi OBJECT-TYPE
    SYNTAX      TmnxHigh32 (0 | 1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktGtpUserTunnEpIdHi specifies the most
         significant 32 bits of the GTP-U Tunnel Endpoint Identifier (TEID)
         field of the specified header.

         Together, tmnxOamBuildPktGtpUserTunnEpIdHi and
         tmnxOamBuildPktGtpUserTunnEpIdLo specify a number in the range
         0..4294967296 (i.e. 2^32).

         When the hosting row is a base definition (i.e.
         tmnxOamBuildPktNumOrZero is zero), the default TEID is 0.

         When the hosting row is an override definition (i.e.
         tmnxOamBuildPktNumOrZero is non-zero), the default TEID is 4294967296.
         That indicates an unspecified override.  The TEID High/Low object pair
         is needed to accommodate 4294967296."
    ::= { tmnxOamBuildPktGtpUserCtlEntry 2 }

tmnxOamBuildPktGtpUserTunnEpIdLo OBJECT-TYPE
    SYNTAX      TmnxLow32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamBuildPktGtpUserTunnEpIdLo specifies the least
         significant 32 bits of the GTP-U Tunnel Endpoint Identifier (TEID)
         field of the specified header.

         See the DESCRIPTION clause of tmnxOamBuildPktGtpUserTunnEpIdHi for
         more information."
    ::= { tmnxOamBuildPktGtpUserCtlEntry 3 }

tmnxOamNotificationObjs          OBJECT IDENTIFIER ::= { tmnxOamTestObjs 7 }

tmnxOamTestRunIndex              OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamTestRunIndex indicates a test run index (e.g.
         tmnxOamPingResultsTestRunIndex or tmnxOamDiagResultsTestRunIndex)
         reported in a notification."
    ::= { tmnxOamNotificationObjs 1 }

tmnxOamIfPingObjs                OBJECT IDENTIFIER ::= { tmnxOamTestObjs 8 }

tmnxOamIfPingTmplCtlTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamIfPingTmplCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamIfPingTmplCtlTable has an entry for each ping template
         controlling the operational status of an IP interface. This is
         achieved by using ICMP."
    ::= { tmnxOamIfPingObjs 1 }

tmnxOamIfPingTmplCtlEntry        OBJECT-TYPE
    SYNTAX      TmnxOamIfPingTmplCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a ping template. Entries can be created and
         deleted via SNMP SET operations on the object
         tmnxOamIfPingTmplCtlRowStatus."
    INDEX       { IMPLIED tmnxOamIfPingTmplCtlName }
    ::= { tmnxOamIfPingTmplCtlTable 1 }

TmnxOamIfPingTmplCtlEntry        ::= SEQUENCE
{
    tmnxOamIfPingTmplCtlName         TLNamedItem,
    tmnxOamIfPingTmplCtlRowStatus    RowStatus,
    tmnxOamIfPingTmplCtlLastMgmtChg  TimeStamp,
    tmnxOamIfPingTmplCtlDescription  TItemDescription,
    tmnxOamIfPingTmplCtlDscp         TDSCPName,
    tmnxOamIfPingTmplCtlDot1p        Dot1PPriority,
    tmnxOamIfPingTmplCtlInterval     Unsigned32,
    tmnxOamIfPingTmplCtlTimeout      Unsigned32,
    tmnxOamIfPingTmplCtlFailThrld    Unsigned32,
    tmnxOamIfPingTmplCtlReactInt     Unsigned32,
    tmnxOamIfPingTmplCtlReactFailThr Unsigned32,
    tmnxOamIfPingTmplCtlReactTimeout Unsigned32,
    tmnxOamIfPingTmplCtlReactThrld   Unsigned32,
    tmnxOamIfPingTmplCtlSize         Unsigned32,
    tmnxOamIfPingTmplCtlTtl          Unsigned32,
    tmnxOamIfPingTmplCtlSync         TmnxActionType
}

tmnxOamIfPingTmplCtlName         OBJECT-TYPE
    SYNTAX      TLNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlName specifies the name of the
         template."
    ::= { tmnxOamIfPingTmplCtlEntry 1 }

tmnxOamIfPingTmplCtlRowStatus    OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlRowStatus specifies the creation and
         deletion of rows in this table. Note that a template can not be
         destroyed if it is referenced by an interface (i.e.
         tmnxOamIfPingIfTemplate)"
    ::= { tmnxOamIfPingTmplCtlEntry 2 }

tmnxOamIfPingTmplCtlLastMgmtChg  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlLastMgmtChg indicates the sysUpTime
         at the time of the most recent management-initiated change to this
         table row."
    ::= { tmnxOamIfPingTmplCtlEntry 3 }

tmnxOamIfPingTmplCtlDescription  OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlDescription specifies the description
         of the template."
    DEFVAL      { "" }
    ::= { tmnxOamIfPingTmplCtlEntry 4 }

tmnxOamIfPingTmplCtlDscp         OBJECT-TYPE
    SYNTAX      TDSCPName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlDscp specifies the DSCP to be carried
         in IP header of the ICMP echo request."
    DEFVAL      { "nc1" }
    ::= { tmnxOamIfPingTmplCtlEntry 5 }

tmnxOamIfPingTmplCtlDot1p        OBJECT-TYPE
    SYNTAX      Dot1PPriority (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlDot1p specifies the values of the
         Ethernet dot1p bits in the outer and any inner Ethernet header, when
         dot1q or qinq encapsulation is used. The field is not exposed to
         egress QoS policy."
    DEFVAL      { 7 }
    ::= { tmnxOamIfPingTmplCtlEntry 6 }

tmnxOamIfPingTmplCtlInterval     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlInterval specifies the packets
         transmit interval used when the interface is operational."
    DEFVAL      { 60 }
    ::= { tmnxOamIfPingTmplCtlEntry 7 }

tmnxOamIfPingTmplCtlTimeout      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlTimeout specifies the time the
         function will wait before declaring an ICMP echo request packet is
         lost."
    DEFVAL      { 5 }
    ::= { tmnxOamIfPingTmplCtlEntry 8 }

tmnxOamIfPingTmplCtlFailThrld    OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlFailThrld specifies a count that
         causes the transition of the IP interface from operationally up to
         operationally down because of ping-template failure."
    DEFVAL      { 3 }
    ::= { tmnxOamIfPingTmplCtlEntry 9 }

tmnxOamIfPingTmplCtlReactInt     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlReactInt specifies the packets
         transmit interval used when the IP interface is operationally down
         because of ping-template failure and the previous ICMP echo request
         successfully received a response."
    DEFVAL      { 1 }
    ::= { tmnxOamIfPingTmplCtlEntry 10 }

tmnxOamIfPingTmplCtlReactFailThr OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlReactFailThr specifies the number of
         consecutive failures without previous successes, that must occur
         transmitting at the reactivation interval before changing to the
         standard interval and subsequently waiting for the first success."
    DEFVAL      { 4 }
    ::= { tmnxOamIfPingTmplCtlEntry 11 }

tmnxOamIfPingTmplCtlReactTimeout OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlReactTimeout specifies the wait time
         before declaring the packet is lost."
    DEFVAL      { 1 }
    ::= { tmnxOamIfPingTmplCtlEntry 12 }

tmnxOamIfPingTmplCtlReactThrld   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlReactThrld specifies the number of
         consecutive successful ICMP responses that triggers the interface from
         operationally down to operationally up."
    DEFVAL      { 3 }
    ::= { tmnxOamIfPingTmplCtlEntry 13 }

tmnxOamIfPingTmplCtlSize         OBJECT-TYPE
    SYNTAX      Unsigned32 (12..9786)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlSize specifies the size of the IP
         packet before the Ethernet header is applied."
    DEFVAL      { 56 }
    ::= { tmnxOamIfPingTmplCtlEntry 14 }

tmnxOamIfPingTmplCtlTtl          OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingTmplCtlTtl specifies the time to live
         setting in the ICMP ping packet."
    DEFVAL      { 1 }
    ::= { tmnxOamIfPingTmplCtlEntry 15 }

tmnxOamIfPingTmplCtlSync         OBJECT-TYPE
    SYNTAX      TmnxActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting this object to 'doAction' triggers an attempt to to update all
         interfaces that use the specified ping-template and update all
         interfaces that are using previously configured values that do not
         match the currently active template.

         An SNMP GET request on this object returns 'notApplicable'."
    DEFVAL      { notApplicable }
    ::= { tmnxOamIfPingTmplCtlEntry 16 }

tmnxOamIfPingIfTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamIfPingIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOamIfPingIfTable has an entry for each interface associated
         with a ping-template."
    ::= { tmnxOamIfPingObjs 2 }

tmnxOamIfPingIfEntry             OBJECT-TYPE
    SYNTAX      TmnxOamIfPingIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOamIfPingIfEntry represents an interface on
         this router that uses a ping-template.  An entry in
         this table can be created or destroyed by an SNMP SET request to
         tmnxOamIfPingIfRowStatus.  An attempt to destroy a row will fail if
         tmnxOamIfPingIfAdminState has not first been set to 'outOfService'."
    INDEX       {
        vRtrID,
        vRtrIfIndex
    }
    ::= { tmnxOamIfPingIfTable 1 }

TmnxOamIfPingIfEntry             ::= SEQUENCE
{
    tmnxOamIfPingIfRowStatus         RowStatus,
    tmnxOamIfPingIfTemplate          TLNamedItem,
    tmnxOamIfPingIfLastChanged       TimeStamp,
    tmnxOamIfPingIfAdminState        TmnxAdminState,
    tmnxOamIfPingIfDestAddrType      InetAddressType,
    tmnxOamIfPingIfDestAddr          InetAddress,
    tmnxOamIfPingIfFailThrldCnt      Counter32,
    tmnxOamIfPingIfPassThrldCnt      Counter32,
    tmnxOamIfPingIfCtlDscp           TDSCPName,
    tmnxOamIfPingIfCtlDot1p          Dot1PPriority,
    tmnxOamIfPingIfCtlInterval       Unsigned32,
    tmnxOamIfPingIfCtlTimeout        Unsigned32,
    tmnxOamIfPingIfCtlFailThrld      Unsigned32,
    tmnxOamIfPingIfCtlReactInt       Unsigned32,
    tmnxOamIfPingIfCtlReactFailThr   Unsigned32,
    tmnxOamIfPingIfCtlReactTimeout   Unsigned32,
    tmnxOamIfPingIfCtlReactThrld     Unsigned32,
    tmnxOamIfPingIfCtlSize           Unsigned32,
    tmnxOamIfPingIfCtlTtl            Unsigned32,
    tmnxOamIfPingIfCurrentInterval   INTEGER,
    tmnxOamIfPingIfCurrentState      INTEGER
}

tmnxOamIfPingIfRowStatus         OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfRowStatus is used to create or delete an
         entry in this table.

         Before this row can be destroyed, tmnxOamIfPingIfAdminState must have
         been set to 'outOfService'."
    ::= { tmnxOamIfPingIfEntry 1 }

tmnxOamIfPingIfTemplate          OBJECT-TYPE
    SYNTAX      TLNamedItem
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfTemplate specifies the ping-template. A
         value of this object must be specified when the row is created. The
         ping-template name must exist in the tmnxOamIfPingTmplCtlTable"
    ::= { tmnxOamIfPingIfEntry 2 }

tmnxOamIfPingIfLastChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfLastChanged indicates the sysUpTime when
         this row was last modified."
    ::= { tmnxOamIfPingIfEntry 3 }

tmnxOamIfPingIfAdminState        OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfAdminState specifies the desired
         administrative state of the ping-template on this interface."
    DEFVAL      { outOfService }
    ::= { tmnxOamIfPingIfEntry 4 }

tmnxOamIfPingIfDestAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfDestAddrType specifies the type of address
         stored in tmnxOamIfPingIfDestAddr."
    DEFVAL      { unknown }
    ::= { tmnxOamIfPingIfEntry 5 }

tmnxOamIfPingIfDestAddr          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfDestAddr specifies the IP destination
         address of the ICMP.

         A non-empty value must be a valid unicast IP address."
    DEFVAL      { ''H }
    ::= { tmnxOamIfPingIfEntry 6 }

tmnxOamIfPingIfFailThrldCnt      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfFailThrldCnt indicates the count of
         contiguous ping failures that are counting towards the
         tmnxOamIfPingTmplCtlFailThrld when the interface is operationally up."
    ::= { tmnxOamIfPingIfEntry 7 }

tmnxOamIfPingIfPassThrldCnt      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfPassThrldCnt indicates the count of
         contiguous ping successes that are counting towards the
         tmnxOamIfPingTmplCtlReactThrld when the interface is operationally
         down."
    ::= { tmnxOamIfPingIfEntry 8 }

tmnxOamIfPingIfCtlDscp           OBJECT-TYPE
    SYNTAX      TDSCPName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlDscp indicates the DSCP to be carried
         in IP header of the ICMP echo request."
    ::= { tmnxOamIfPingIfEntry 9 }

tmnxOamIfPingIfCtlDot1p          OBJECT-TYPE
    SYNTAX      Dot1PPriority (0..7)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlDot1p indicates the values of the
         Ethernet dot1p bits in the outer and any inner Ethernet header, when
         dot1q or qinq encapsulation is used. The field is not exposed to
         egress QoS policy."
    ::= { tmnxOamIfPingIfEntry 10 }

tmnxOamIfPingIfCtlInterval       OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlInterval indicates the packets transmit
         interval used when the interface is operational."
    ::= { tmnxOamIfPingIfEntry 11 }

tmnxOamIfPingIfCtlTimeout        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlTimeout indicates the time the function
         will wait before declaring an ICMP echo request packet is lost."
    ::= { tmnxOamIfPingIfEntry 12 }

tmnxOamIfPingIfCtlFailThrld      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlFailThrld indicates a count that causes
         the transition of the IP interface from operationally up to
         operationally down because of ping-template failure."
    ::= { tmnxOamIfPingIfEntry 13 }

tmnxOamIfPingIfCtlReactInt       OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlReactInt indicates the packets transmit
         interval used when the IP interface is operationally down because of
         ping-template failure and the previous ICMP echo request successfully
         received a response."
    ::= { tmnxOamIfPingIfEntry 14 }

tmnxOamIfPingIfCtlReactFailThr   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlReactFailThr indicates the number of
         consecutive failures without previous successes, that must occur
         transmitting at the reactivation interval before changing to the
         standard interval and subsequently waiting for the first success."
    ::= { tmnxOamIfPingIfEntry 15 }

tmnxOamIfPingIfCtlReactTimeout   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlReactTimeout indicates the wait time
         before declaring the packet is lost."
    ::= { tmnxOamIfPingIfEntry 16 }

tmnxOamIfPingIfCtlReactThrld     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlReactThrld indicates the number of
         consecutive successful ICMP responses that triggers the interface from
         operationally down to operationally up."
    ::= { tmnxOamIfPingIfEntry 17 }

tmnxOamIfPingIfCtlSize           OBJECT-TYPE
    SYNTAX      Unsigned32 (56..9786)
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlSize indicates the size of the IP
         packet before the Ethernet header is applied."
    ::= { tmnxOamIfPingIfEntry 18 }

tmnxOamIfPingIfCtlTtl            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCtlTtl indicates the time to live setting
         in the ICMP ping packet."
    ::= { tmnxOamIfPingIfEntry 19 }

tmnxOamIfPingIfCurrentInterval   OBJECT-TYPE
    SYNTAX      INTEGER {
        interval     (0),
        reactivation (1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCurrentInterval indicates if the ping
         check interval being used is the value of tmnxOamIfPingIfCtlInterval
         or tmnxOamIfPingIfCtlReactInt.

         A value of 'interval' indicates the ping check is failed, waiting for
         a first success, or that the ping check is Operational.

         A value of 'reactivation' indicates the ping check is recovering."
    ::= { tmnxOamIfPingIfEntry 20 }

tmnxOamIfPingIfCurrentState      OBJECT-TYPE
    SYNTAX      INTEGER {
        operational (0),
        recovering  (1),
        failed      (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamIfPingIfCurrentState indicates the current state
         of the ping check, this will be used to drive the interface
         operational state.

         A value of 'operational' indicates the ping check succeeded, the
         interface is up.

         A value of 'recovering' indicates the ping check is recovering using
         the reactivation interval.

         A value of 'failed' indicates the ping check failed, the interface is
         down."
    ::= { tmnxOamIfPingIfEntry 21 }

tmnxOamLnkMeasObjs               OBJECT IDENTIFIER ::= { tmnxOamTestObjs 9 }

tmnxOamLnkMeasTmplCtlTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLnkMeasTmplCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasTmplCtlTable allows link measurement templates to be
         configured. A link measurement template is configured against a router
         interface to measure delay between nodes.

         A change to any object in this table (except for
         tmnxOamLnkMeasTmplCtlDescription, tmnxOamLnkMeasTmplCtlIpv6UdpZero,
         and tmnxOamLnkMeasTmplCtlLastRepHold) will cause active link
         measurement tests to stop and restart."
    REFERENCE
        "IETF draft-gandhi-spring-twamp-srpm-10, 'Performance Measurement Using TWAMP Light
         for Segment Routing Networks', August 6, 2020, Sections 1 to 4.1.1."
    ::= { tmnxOamLnkMeasObjs 1 }

tmnxOamLnkMeasTmplCtlEntry       OBJECT-TYPE
    SYNTAX      TmnxOamLnkMeasTmplCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasTmplCtlEntry allows a link measurement template to be
         configured.

         Rows are created or destroyed by SNMP Set operations on
         tmnxOamLnkMeasTmplCtlRowStatus."
    INDEX       { tmnxOamLnkMeasTmplCtlName }
    ::= { tmnxOamLnkMeasTmplCtlTable 1 }

TmnxOamLnkMeasTmplCtlEntry       ::= SEQUENCE
{
    tmnxOamLnkMeasTmplCtlName        TLNamedItem,
    tmnxOamLnkMeasTmplCtlRowStatus   RowStatus,
    tmnxOamLnkMeasTmplCtlLastMgmtChg TimeStamp,
    tmnxOamLnkMeasTmplCtlDescription TItemDescription,
    tmnxOamLnkMeasTmplCtlUnidirMeasT INTEGER,
    tmnxOamLnkMeasTmplCtlDelayMeasTy INTEGER,
    tmnxOamLnkMeasTmplCtlInterval    Unsigned32,
    tmnxOamLnkMeasTmplCtlLastRepHold Unsigned32,
    tmnxOamLnkMeasTmplCtlDscpEgrRmrk TruthValue,
    tmnxOamLnkMeasTmplCtlIpv6UdpZero TruthValue,
    tmnxOamLnkMeasTmplCtlDscpName    TDSCPName,
    tmnxOamLnkMeasTmplCtlDstUdpPort  InetPortNumber,
    tmnxOamLnkMeasTmplCtlFC          TFCName,
    tmnxOamLnkMeasTmplCtlProfile     TProfile,
    tmnxOamLnkMeasTmplCtlTwlTmStpFmt INTEGER,
    tmnxOamLnkMeasTmplCtlTwlTimeLive Unsigned32,
    tmnxOamLnkMeasTmplCtlSWMultplir  Unsigned32,
    tmnxOamLnkMeasTmplCtlSWIntegrity Unsigned32,
    tmnxOamLnkMeasTmplCtlSWThrldRel  Unsigned32,
    tmnxOamLnkMeasTmplCtlSWThrldAbs  Unsigned32,
    tmnxOamLnkMeasTmplCtlASWMultplir Unsigned32,
    tmnxOamLnkMeasTmplCtlASWIntgrity Unsigned32,
    tmnxOamLnkMeasTmplCtlASWThrldRel Unsigned32,
    tmnxOamLnkMeasTmplCtlASWThrldAbs Unsigned32,
    tmnxOamLnkMeasTmplCtlAdminState  TmnxEnabledDisabledAdminState
}

tmnxOamLnkMeasTmplCtlName        OBJECT-TYPE
    SYNTAX      TLNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlName specifies the name of the link
         measurement template.

         This is the INDEX for tmnxOamLnkMeasTmplCtlTable."
    ::= { tmnxOamLnkMeasTmplCtlEntry 1 }

tmnxOamLnkMeasTmplCtlRowStatus   OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlRowStatus specifies the row status
         of the link measurement template."
    ::= { tmnxOamLnkMeasTmplCtlEntry 2 }

tmnxOamLnkMeasTmplCtlLastMgmtChg OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlLastMgmtChg indicates the sysUpTime
         at the time of the most recent management-initiated change to this
         table row."
    ::= { tmnxOamLnkMeasTmplCtlEntry 3 }

tmnxOamLnkMeasTmplCtlDescription OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlDescription specifies the
         descriptive text for the link measurement template."
    DEFVAL      { "" }
    ::= { tmnxOamLnkMeasTmplCtlEntry 4 }

tmnxOamLnkMeasTmplCtlUnidirMeasT OBJECT-TYPE
    SYNTAX      INTEGER {
        derived (1),
        actual  (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlUnidirMeasT specifies how to compute
         a unidirectional delay measurement.

         Values:
            derived(1)
                Computes the unidirectional measurement using the round trip
                delay divided by two. This option should be used when the
                nodal clocks are not synchronized.
            actual(2)
                Uses the forward delay as the unidirectional measurement.
                Forward delay is calculated using T2-T1 timestamp values."
    DEFVAL      { derived }
    ::= { tmnxOamLnkMeasTmplCtlEntry 5 }

tmnxOamLnkMeasTmplCtlDelayMeasTy OBJECT-TYPE
    SYNTAX      INTEGER {
        min (1),
        max (2),
        avg (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlDelayMeasTy specifies the type of
         delay measurement that is used for comparison and reporting.

         It is used at both the sample window and the aggregate sample window
         level.

         Values:
            min(1)
                Take the minimum of a series of measurements for comparison and
                reporting.
            max(2)
                Take the maximum of a series of measurements for comparison and
                reporting.
            average(3)
                Compute the average of a series of measurements for comparison
                and reporting."
    DEFVAL      { min }
    ::= { tmnxOamLnkMeasTmplCtlEntry 6 }

tmnxOamLnkMeasTmplCtlInterval    OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlInterval specifies the elapsed time
         between transmission of test packets for the specified template."
    DEFVAL      { 1 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 7 }

tmnxOamLnkMeasTmplCtlLastRepHold OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlLastRepHold specifies how long a
         delay measurement is to be retained after the interface on which it
         was collected is administratively disabled.

         If the configured value is reached, the last reported measurement,
         tmnxOamLnkMeasIfResDelayReported, is set to zero."
    DEFVAL      { 86400 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 8 }

tmnxOamLnkMeasTmplCtlDscpEgrRmrk OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlDscpEgrRmrk specifies whether or not
         to allow each echo request packet's IP header Differentiated Services
         Code Point (DSCP) to be overwritten in accordance with the egress
         port's Quality of Service (QoS) policy.

         If the value of this object is 'true(1)', the IP header's DSCP may be
         overwritten."
    DEFVAL      { false }
    ::= { tmnxOamLnkMeasTmplCtlEntry 9 }

tmnxOamLnkMeasTmplCtlIpv6UdpZero OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlIpv6UdpZero specifies whether or not
         to allow the processing of IPv6 packets received with a UDP checksum
         of zero.

         When tmnxOamLnkMeasTmplCtlIpv6UdpZero is false, IPv6 packets received
         with a UDP checksum of zero will be discarded."
    DEFVAL      { false }
    ::= { tmnxOamLnkMeasTmplCtlEntry 10 }

tmnxOamLnkMeasTmplCtlDscpName    OBJECT-TYPE
    SYNTAX      TDSCPName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlDscpName specifies the
         Differentiated Services Code Point (DSCP) to be copied into the IP
         header of each echo request packet launched for each link measurement
         test belonging to the specified template."
    DEFVAL      { "nc1" }
    ::= { tmnxOamLnkMeasTmplCtlEntry 11 }

tmnxOamLnkMeasTmplCtlDstUdpPort  OBJECT-TYPE
    SYNTAX      InetPortNumber (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlDstUdpPort specifies the destination
         UDP port to be copied into the UDP header of each echo request packet
         launched for each link measurement test belonging to the specified
         template.

         The default port (862) is the IANA standard TWAMP receiver port."
    REFERENCE
        "https://www.iana.org/assignments/service-names-port-numbers/
         service-names-port-numbers.txt"
    DEFVAL      { 862 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 12 }

tmnxOamLnkMeasTmplCtlFC          OBJECT-TYPE
    SYNTAX      TFCName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlFC specifies the Quality of Service
         forwarding-class to be used when launching the link measurement test
         belonging to the specified template."
    DEFVAL      { "h1" }
    ::= { tmnxOamLnkMeasTmplCtlEntry 13 }

tmnxOamLnkMeasTmplCtlProfile     OBJECT-TYPE
    SYNTAX      TProfile
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlProfile specifies the Quality of
         Service profile to be used when launching the link measurement test
         belonging to the specified template."
    DEFVAL      { in }
    ::= { tmnxOamLnkMeasTmplCtlEntry 14 }

tmnxOamLnkMeasTmplCtlTwlTmStpFmt OBJECT-TYPE
    SYNTAX      INTEGER {
        ntp (1),
        ptp (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlTwlTmStpFmt specifies the timestamp
         format to be used in the TWAMP Light PDU.

         Values:
            ntp(1)
                Network Time Protocol
            ptp(2)
                Precision Time Protocol"
    REFERENCE
        "TWAMP timestamp: https://tools.ietf.org/html/rfc8186#section-2.3

         NTP: https://tools.ietf.org/html/rfc958

         PTP: https://standards.ieee.org/standard/1588-2008.html"
    DEFVAL      { ntp }
    ::= { tmnxOamLnkMeasTmplCtlEntry 15 }

tmnxOamLnkMeasTmplCtlTwlTimeLive OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlTwlTimeLive specifies the time to
         live value in the TWAMP IP header."
    DEFVAL      { 1 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 16 }

tmnxOamLnkMeasTmplCtlSWMultplir  OBJECT-TYPE
    SYNTAX      Unsigned32 (1..900)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlSWMultplir specifies the multiplier
         that is applied to the interval (tmnxOamLnkMeasTmplCtlInterval) to
         derive the number of seconds for which a sample window is open and can
         collect delay measurements.

         For example, a sample window multiplier of 10 and an interval value of
         5 seconds result in a sample window being open for 10 * 5 seconds = 50
         seconds.

         This window collects samples and computes a single value upon
         completion."
    DEFVAL      { 10 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 17 }

tmnxOamLnkMeasTmplCtlSWIntegrity OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..100)
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlSWIntegrity specifies the percentage
         of request-response pairs that must be successfully sent and received
         during the sample window for its series of measurements to be deemed
         worthy of reporting to the aggregate sample window or the routing
         engine.

         A value of 0 specifies that no integrity value must be met for
         measurements to be reported.

         Failure of all request-response pairs in a sample window will be
         treated as a special case. Zero will not be reported, but a value
         representing 'N/A' will be conveyed."
    DEFVAL      { 0 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 18 }

tmnxOamLnkMeasTmplCtlSWThrldRel  OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..500)
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlSWThrldRel specifies the percentage
         value of change, positive or negative, a new delay measurement must
         differ from the previously reported measurement to be deemed worth of
         reporting directly to the routing engine (circumventing the aggregate
         sample window).

         If this percentage value is reached, the accumulated aggregate data
         will be cleared, the aggregate window will be reset, and the new delay
         measurement will be reported to the routing engine and used as the
         most recently reported measurement.

         A value of zero specifies that the sample window measurement will not
         be measured against tmnxOamLnkMeasTmplCtlSWThrldRel but will be
         reported directly to the aggregate sample window (assuming integrity).


         The absolute threshold, tmnxOamLnkMeasTmplCtlSWThrldAbs, will be
         checked before this object, the relative threshold,
         tmnxOamLnkMeasTmplCtlSWThrldRel."
    DEFVAL      { 0 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 19 }

tmnxOamLnkMeasTmplCtlSWThrldAbs  OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..100000)
    UNITS       "microseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlSWThrldAbs specifies the delta, in
         microseconds, that a new delay measurement must differ from the
         previously reported measurement to be deemed worth of reporting
         directly to the routing engine (circumventing the aggregate sample
         window).

         If this value is reached the accumulated aggregate data will be
         cleared, the aggregate window will be reset, and the new delay
         measurement will be reported to the routing engine and used as the
         most recently reported measurement.

         A value of zero specifies that the sample window measurement will not
         be measured against tmnxOamLnkMeasTmplCtlSWThrldAbs but will be
         reported directly to the aggregate sample window (assuming integrity).

         This object, the absolute threshold, tmnxOamLnkMeasTmplCtlSWThrldAbs,
         will be checked before the relative, tmnxOamLnkMeasTmplCtlSWThrldRel."
    DEFVAL      { 0 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 20 }

tmnxOamLnkMeasTmplCtlASWMultplir OBJECT-TYPE
    SYNTAX      Unsigned32 (1..12)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlASWMultplir specifies the multiplier
         that is applied to the sample window multiplier
         (tmnxOamLnkMeasTmplCtlSWMultplir) to derive the number of seconds for
         which an aggregate sample window is open and can collect delay
         measurements.

         For example, an aggregate sample window multiplier of 3 and a sample
         window duration of 50 seconds (as computed in the description of
         tmnxOamLnkMeasTmplCtlSWMultplir) result in an aggregate sample window
         being open for 3 * 50 seconds = 150 seconds (i.e.: 3 sample windows in
         the aggregate sample window).

         Values computed in sample windows are passed to the open aggregate
         sample window. At the end of this aggregate window timer a result is
         computed based on tmnxOamLnkMeasTmplCtlDelayMeasTy and is passed to
         the routing engine (depending on the ASW threshold configuration)."
    DEFVAL      { 12 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 21 }

tmnxOamLnkMeasTmplCtlASWIntgrity OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..100)
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlASWIntgrity specifies the percentage
         of sample window measurements that must have met their integrity
         value, tmnxOamLnkMeasTmplCtlSWIntegrity, for the aggregate result to
         be deemed worthy of reporting to the routing engine.

         A value of 0 specifies that no integrity value must be met for
         measurements to be reported to the routing engine.

         Failure of all sample windows to meet their integrity values will be
         treated as a special case. Zero will not be reported to the routing
         engine, but a value representing 'N/A' will be reported."
    DEFVAL      { 0 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 22 }

tmnxOamLnkMeasTmplCtlASWThrldRel OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..100)
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlASWThrldRel specifies the percentage
         value of change, positive or negative, a new aggregate delay
         measurement must differ from the previously reported aggregate
         measurement to be deemed worthy of reporting to the routing engine.

         A value of zero specifies that the aggregate sample window measurement
         will not be measured against tmnxOamLnkMeasTmplCtlASWThrldRel but will
         be reported directly to the routing engine (assuming integrity).

         The absolute threshold, tmnxOamLnkMeasTmplCtlASWThrldAbs, will be
         checked before this object, the relative threshold,
         tmnxOamLnkMeasTmplCtlASWThrldRel."
    DEFVAL      { 0 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 23 }

tmnxOamLnkMeasTmplCtlASWThrldAbs OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..100000)
    UNITS       "microseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlASWThrldAbs specifies the delta, in
         microseconds, that a new aggregate delay measurement must differ from
         the previously reported aggregate measurement to be deemed worthy of
         reporting to the routing engine.

         A value of zero specifies that the aggregate sample window measurement
         will not be measured against tmnxOamLnkMeasTmplCtlASWThrldAbs but will
         be reported directly to the routing engine (assuming integrity).

         This object, the absolute threshold, tmnxOamLnkMeasTmplCtlASWThrldAbs,
         will be checked before the relative, tmnxOamLnkMeasTmplCtlASWThrldRel."
    DEFVAL      { 0 }
    ::= { tmnxOamLnkMeasTmplCtlEntry 24 }

tmnxOamLnkMeasTmplCtlAdminState  OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabledAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasTmplCtlAdminState specifies whether the
         template is administratively disabled or administratively enabled.

         The objects in a link measurement template cannot be modified while
         tmnxOamLnkMeasTmplCtlAdminState is enabled.

         Changes made to a disabled link measurement template are propagated to
         associated interfaces when tmnxOamLnkMeasTmplCtlAdminState is enabled.

         An interface will not run the link measurement test when its
         associated template's tmnxOamLnkMeasTmplCtlAdminState is disabled."
    DEFVAL      { disabled }
    ::= { tmnxOamLnkMeasTmplCtlEntry 25 }

tmnxOamLnkMeasIfResTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLnkMeasIfResEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasIfResTable contains delay measurement information from
         interfaces that have an associated link measurement template.

         (For the interface to be collecting link measurement data, it must be
         associated with a link measurement template found in
         tmnxOamLnkMeasTmplCtlTable.)"
    ::= { tmnxOamLnkMeasObjs 2 }

tmnxOamLnkMeasIfResEntry         OBJECT-TYPE
    SYNTAX      TmnxOamLnkMeasIfResEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasIfResEntry contains source and destination IP address
         information, operational state and failure condition information, as
         well as delay measurement data and meta data.

         A row is created in tmnxOamLnkMeasIfResTable when a link measurement
         template is associated with an interface.

         A row is destroyed in tmnxOamLnkMeasIfResTable when the association
         between the interface and its link measurement template is broken."
    INDEX       {
        vRtrID,
        vRtrIfIndex
    }
    ::= { tmnxOamLnkMeasIfResTable 1 }

TmnxOamLnkMeasIfResEntry         ::= SEQUENCE
{
    tmnxOamLnkMeasIfResSrcIpAddrTy   InetAddressType,
    tmnxOamLnkMeasIfResSrcIpAddr     InetAddress,
    tmnxOamLnkMeasIfResSrcIpAssigned TruthValue,
    tmnxOamLnkMeasIfResDstIpAddrTy   InetAddressType,
    tmnxOamLnkMeasIfResDstIpAddr     InetAddress,
    tmnxOamLnkMeasIfResDstIpAssigned TruthValue,
    tmnxOamLnkMeasIfResOperState     ServiceOperStatus,
    tmnxOamLnkMeasIfResFailureCond   BITS,
    tmnxOamLnkMeasIfResDetctbleTxErr INTEGER,
    tmnxOamLnkMeasIfResReporting     TruthValue,
    tmnxOamLnkMeasIfResDelayReported Integer32,
    tmnxOamLnkMeasIfResTimestampUTC  DateAndTime,
    tmnxOamLnkMeasIfResTriggeredBy   INTEGER,
    tmnxOamLnkMeasIfResNewestASWIdx  Unsigned32,
    tmnxOamLnkMeasIfResNewestSWIdx   Unsigned32
}

tmnxOamLnkMeasIfResSrcIpAddrTy   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSrcIpAddrTy indicates the address type
         of tmnxOamLnkMeasIfResSrcIpAddr."
    ::= { tmnxOamLnkMeasIfResEntry 1 }

tmnxOamLnkMeasIfResSrcIpAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSrcIpAddr indicates the source IP
         address from which TWAMP packets are being sent.

         The address is configured using
         TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4SrcAddr or
         TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6SrcAddr. If a configured value
         is present, it is returned. If no value is configured, the configured
         interface address (TIMETRA-VRTR-MIB::vRiaInetAddress) is returned."
    ::= { tmnxOamLnkMeasIfResEntry 2 }

tmnxOamLnkMeasIfResSrcIpAssigned OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSrcIpAssigned indicates whether
         tmnxOamLnkMeasIfResSrcIpAddr was assigned (true) or configured
         (false)."
    ::= { tmnxOamLnkMeasIfResEntry 3 }

tmnxOamLnkMeasIfResDstIpAddrTy   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResDstIpAddrTy indicates the address type
         of tmnxOamLnkMeasIfResDstIpAddr."
    ::= { tmnxOamLnkMeasIfResEntry 4 }

tmnxOamLnkMeasIfResDstIpAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResDstIpAddr indicates the destination IP
         address to which TWAMP packets are being sent.

         The address is configured using
         TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4DstAddr or
         TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6DstAddr. If a configured value
         is present, it is returned. If no value is configured, SROS selects a
         destination address, and it is returned."
    ::= { tmnxOamLnkMeasIfResEntry 5 }

tmnxOamLnkMeasIfResDstIpAssigned OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResDstIpAssigned indicates whether
         tmnxOamLnkMeasIfResDstIpAddr was assigned (true) or configured
         (false)."
    ::= { tmnxOamLnkMeasIfResEntry 6 }

tmnxOamLnkMeasIfResOperState     OBJECT-TYPE
    SYNTAX      ServiceOperStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResOperState indicates the operational
         state of link measurement on this interface.

         This state is determined by the administrative state of the link
         measurement template (tmnxOamLnkMeasTmplCtlAdminState), the
         administrative state of the interface
         (TIMETRA-VRTR-MIB::vRtrIfAdminState), and the administrative state of
         the interface's link measurement chosen internet protocol
         (TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4AdminState or
         TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6AdminState)."
    ::= { tmnxOamLnkMeasIfResEntry 7 }

tmnxOamLnkMeasIfResFailureCond   OBJECT-TYPE
    SYNTAX      BITS {
        noProtocol         (0),
        templateAdminDown  (1),
        udpPortUnavailable (2),
        internalError      (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResFailureCond indicates the reason(s)
         why this interface's link measurement is operationally disabled.

         This state is determined by the administrative state of the link
         measurement template (tmnxOamLnkMeasTmplCtlAdminState), the
         administrative state of the interface
         (TIMETRA-VRTR-MIB::vRtrIfAdminState), and the administrative state of
         the interface's link measurement chosen internet protocol
         (TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4AdminState or
         TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6AdminState)."
    ::= { tmnxOamLnkMeasIfResEntry 8 }

tmnxOamLnkMeasIfResDetctbleTxErr OBJECT-TYPE
    SYNTAX      INTEGER {
        none                 (1),
        interfaceDown        (2),
        unexpectedError      (3),
        noRoute              (4),
        sourceIpNotLocal     (5),
        invalidDestIp        (6),
        invalidInterfaceType (7),
        sameSourceIpDestIp   (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResDetctbleTxErr indicates a detectable
         error in delay measurement transmission.

         none                 (1) No transmission failure detected
         interfaceDown        (2) The IP interface associated with the delay
                                  measurement test is operationally down or
                                  administratively disabled
         sourceIpNotLocal     (3) The source IP address is not local
         invalidDestIp        (4) The destination IP address is not valid
         noRoute              (5) There is no IP route to the destination address
                                  from this interface
         unexpectedError      (6) Transmission failed due to unexpected conditions,
                                  such as failed memory allocation, traffic
                                  congestion, or failure to obtain necessary
                                  resources
         invalidInterfaceType (7) The interface is not a supported type
         sameSourceIpDestIp   (8) The source and destination IP are the same,
                                  creating an invalid transmission condition."
    ::= { tmnxOamLnkMeasIfResEntry 9 }

tmnxOamLnkMeasIfResReporting     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResReporting indicates whether the
         interface is currently reporting to the routing engine.

         The interface will not report if all thresholds are disabled or there
         are failure conditions present (tmnxOamLnkMeasIfResFailureCond)."
    ::= { tmnxOamLnkMeasIfResEntry 10 }

tmnxOamLnkMeasIfResDelayReported OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0 | 1..2147483647)
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResDelayReported indicates the last delay
         measurement reported to the routing engine.

         A value of -1 (negative one) indicates that no delay has been reported
         because a value has yet to be reported in a new delay measurement
         session.

         A value of 0 (zero) indicates the last reported measurement was
         discarded due to exceeding the measurement template's configured stale
         measurement timer (tmnxOamLnkMeasTmplCtlLastRepHold)."
    ::= { tmnxOamLnkMeasIfResEntry 11 }

tmnxOamLnkMeasIfResTimestampUTC  OBJECT-TYPE
    SYNTAX      DateAndTime (SIZE (8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResTimestampUTC indicates a timestamp
         influenced by the value stored in tmnxOamLnkMeasIfResDelayReported.

         When tmnxOamLnkMeasIfResDelayReported > 0,
         tmnxOamLnkMeasIfResTimestampUTC holds the time at which
         tmnxOamLnkMeasIfResDelayReported was reported to the routing engine.

         When tmnxOamLnkMeasIfResDelayReported = 0,
         tmnxOamLnkMeasIfResTimestampUTC holds the time at which
         tmnxOamLnkMeasIfResDelayReported was cleared (because its aging timer
         expired).

         When tmnxOamLnkMeasIfResDelayReported = -1,
         tmnxOamLnkMeasIfResTimestampUTC holds '1970-Jan-01 00:00:00.0' UTC as
         a placeholder representing a delay has not yet been reported to the
         routing engine."
    ::= { tmnxOamLnkMeasIfResEntry 12 }

tmnxOamLnkMeasIfResTriggeredBy   OBJECT-TYPE
    SYNTAX      INTEGER {
        none                       (1),
        sampleThresholdAbsolute    (2),
        sampleThresholdRelative    (3),
        aggregateThresholdAbsolute (4),
        aggregateThresholdRelative (5),
        expired                    (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResTriggeredBy indicates whether the last
         reported delay (tmnxOamLnkMeasIfResDelayReported) was triggered by a
         sample window threshold (absolute or relative), an aggregate sample
         window threshold (absolute or relative), has not yet been triggered
         (none) or has been discarded because the age of the last reported
         delay (tmnxOamLnkMeasIfResDelayReported) exceeded the value configured
         by tmnxOamLnkMeasTmplCtlLastRepHold."
    ::= { tmnxOamLnkMeasIfResEntry 13 }

tmnxOamLnkMeasIfResNewestASWIdx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResNewestASWIdx indicates the index of
         the newest aggregate sample window result in
         tmnxOamLnkMeasIfResASWTable for this interface.

         A value of zero indicates there are no aggregate sample window results
         for this interface."
    ::= { tmnxOamLnkMeasIfResEntry 14 }

tmnxOamLnkMeasIfResNewestSWIdx   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResNewestSWIdx indicates the index of the
         newest sample window result in tmnxOamLnkMeasIfResSWTable for this
         interface.

         A value of zero indicates there are no sample window results for this
         interface."
    ::= { tmnxOamLnkMeasIfResEntry 15 }

tmnxOamLnkMeasIfResASWTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLnkMeasIfResASWEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasIfResASWTable contains the aggregate sample window
         results for all interfaces with link measurement enabled.

         (For the interface to be collecting link measurement data, it must be associated
          with a link measurement template found in tmnxOamLnkMeasTmplCtlTable.)"
    ::= { tmnxOamLnkMeasObjs 3 }

tmnxOamLnkMeasIfResASWEntry      OBJECT-TYPE
    SYNTAX      TmnxOamLnkMeasIfResASWEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasIfResASWEntry contains one aggregate sample window
         result for the specified interface.

         (For the interface to be collecting link measurement data, it must be
         associated with a link measurement template.)

         A row is created by SROS when an aggregate sample window is created.

         A row is destroyed by SROS when the associated
         tmnxOamLnkMeasIfResTable row is destroyed or the limit on the number
         of aggregate sample windows retained (10) per interface is met, and a
         new aggregate sample window is created. In that case, the row for the
         interface's oldest aggregate sample window is destroyed."
    INDEX       {
        vRtrID,
        vRtrIfIndex,
        tmnxOamLnkMeasIfResASWIndex
    }
    ::= { tmnxOamLnkMeasIfResASWTable 1 }

TmnxOamLnkMeasIfResASWEntry      ::= SEQUENCE
{
    tmnxOamLnkMeasIfResASWIndex      Unsigned32,
    tmnxOamLnkMeasIfResASWEndUTC     DateAndTime,
    tmnxOamLnkMeasIfResASWState      INTEGER,
    tmnxOamLnkMeasIfResASWWindCount  Unsigned32,
    tmnxOamLnkMeasIfResASWReportMin  Unsigned32,
    tmnxOamLnkMeasIfResASWReportMax  Unsigned32,
    tmnxOamLnkMeasIfResASWReportAvg  Unsigned32,
    tmnxOamLnkMeasIfResASWIntegrity  TruthValue,
    tmnxOamLnkMeasIfResASWResult     Unsigned32
}

tmnxOamLnkMeasIfResASWIndex      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWIndex specifies the index value of
         aggregate sample windows on the same interface.

         At most 10 indices (e.g.: 51..60) are accessible at a time.

         The most recent result is stored at the index
         tmnxOamLnkMeasIfResNewestASWIdx."
    ::= { tmnxOamLnkMeasIfResASWEntry 1 }

tmnxOamLnkMeasIfResASWEndUTC     OBJECT-TYPE
    SYNTAX      DateAndTime (SIZE (8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWEndUTC indicates the time at which
         this aggregate sample window closed.

         1970-Jan-01 00:00:00.0 UTC is returned if this aggregate sample window
         is in progress."
    ::= { tmnxOamLnkMeasIfResASWEntry 2 }

tmnxOamLnkMeasIfResASWState      OBJECT-TYPE
    SYNTAX      INTEGER {
        completed   (1),
        inProgress  (2),
        swReported  (3),
        aswReported (4),
        terminated  (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWState indicates whether this
         aggregate sample window has ended (completed), is in progress
         (inProgress), triggered a report to the routing engine because a
         sample window threshold was exceeded (swReported), triggered a report
         to the routing engine because an aggregate sample window threshold was
         exceeded (aswReported), or the window was interrupted and discarded
         because administrative changes were detected during transmission
         (terminated)."
    ::= { tmnxOamLnkMeasIfResASWEntry 3 }

tmnxOamLnkMeasIfResASWWindCount  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWWindCount indicates the number of
         sample windows that have completed and met their integrity value
         within this aggregate sample window."
    ::= { tmnxOamLnkMeasIfResASWEntry 4 }

tmnxOamLnkMeasIfResASWReportMin  OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWReportMin indicates the minimum
         delay measurement reported to the aggregate sample window (by the
         sample windows that have been open during its lifetime).

         A value of zero indicates an invalid delay measurement (not a minimum
         delay measurement of zero)."
    ::= { tmnxOamLnkMeasIfResASWEntry 5 }

tmnxOamLnkMeasIfResASWReportMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWReportMax indicates the maximum
         delay measurement reported to the aggregate sample window (by the
         sample windows that have been open during its lifetime).

         A value of zero indicates an invalid delay measurement (not a maximum
         delay measurement of zero)."
    ::= { tmnxOamLnkMeasIfResASWEntry 6 }

tmnxOamLnkMeasIfResASWReportAvg  OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWReportAvg indicates the average
         delay measurement reported to the aggregate sample window (by the
         sample windows that have been open during its lifetime).

         A value of zero indicates an invalid delay measurement (not an average
         delay measurement of zero)."
    ::= { tmnxOamLnkMeasIfResASWEntry 7 }

tmnxOamLnkMeasIfResASWIntegrity  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWIntegrity indicates whether a
         sufficient percentage of this aggregate sample window's child sample
         windows met their configured integrity value.

         (See tmnxOamLnkMeasIfResSWIntegrity for details on sample window
         integrity.)

         If the sample window does not have a integrity value configured then
         tmnxOamLnkMeasIfResASWIntegrity will always be true."
    ::= { tmnxOamLnkMeasIfResASWEntry 8 }

tmnxOamLnkMeasIfResASWResult     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResASWResult indicates the delay that was
         being evaluated for report according to
         tmnxOamLnkMeasTmplCtlDelayMeasTy when this aggregate sample window was
         open."
    ::= { tmnxOamLnkMeasIfResASWEntry 9 }

tmnxOamLnkMeasIfResSWTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOamLnkMeasIfResSWEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasIfResSWTable contains sample window results for all
         interfaces with link measurement enabled.

         (For the interface to be collecting link measurement data, it must be
         associated with a link measurement template found in
         tmnxOamLnkMeasTmplCtlTable.)"
    ::= { tmnxOamLnkMeasObjs 4 }

tmnxOamLnkMeasIfResSWEntry       OBJECT-TYPE
    SYNTAX      TmnxOamLnkMeasIfResSWEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOamLnkMeasIfResSWEntry contains one sample window result for the
         specified interface.

         (For the interface to be collecting link measurement data, it must be
         associated with a link measurement template.)

         A row is created by SROS when a sample window is created.

         A row is destroyed by SROS when the associated
         tmnxOamLnkMeasIfResTable row is destroyed or the limit on the number
         of sample windows retained (50) per interface is met, and a new sample
         window is created. In that case, the row for the interface's oldest
         sample window is destroyed."
    INDEX       {
        vRtrID,
        vRtrIfIndex,
        tmnxOamLnkMeasIfResSWIndex
    }
    ::= { tmnxOamLnkMeasIfResSWTable 1 }

TmnxOamLnkMeasIfResSWEntry       ::= SEQUENCE
{
    tmnxOamLnkMeasIfResSWIndex       Unsigned32,
    tmnxOamLnkMeasIfResSWEndUTC      DateAndTime,
    tmnxOamLnkMeasIfResSWState       INTEGER,
    tmnxOamLnkMeasIfResSWSent        Unsigned32,
    tmnxOamLnkMeasIfResSWReceived    Unsigned32,
    tmnxOamLnkMeasIfResSWMin         Unsigned32,
    tmnxOamLnkMeasIfResSWMax         Unsigned32,
    tmnxOamLnkMeasIfResSWAvg         Unsigned32,
    tmnxOamLnkMeasIfResSWErrors      Unsigned32,
    tmnxOamLnkMeasIfResSWIntegrity   TruthValue,
    tmnxOamLnkMeasIfResSWResult      Unsigned32
}

tmnxOamLnkMeasIfResSWIndex       OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWIndex specifies an index used to
         differentiate sample windows on the same interface over time.

         At most 50 indices (e.g.: 51..100) are accessible at a time.

         The most recent result is stored at the index
         tmnxOamLnkMeasIfResNewestSWIdx."
    ::= { tmnxOamLnkMeasIfResSWEntry 1 }

tmnxOamLnkMeasIfResSWEndUTC      OBJECT-TYPE
    SYNTAX      DateAndTime (SIZE (8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWEndUTC indicates the time at which
         this sample window closed.

         1970-Jan-01 00:00:00.0 UTC is returned if this sample window is in
         progress."
    ::= { tmnxOamLnkMeasIfResSWEntry 2 }

tmnxOamLnkMeasIfResSWState       OBJECT-TYPE
    SYNTAX      INTEGER {
        completed  (1),
        inProgress (2),
        swReported (3),
        terminated (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWState indicates whether this sample
         window has ended (completed), is in progress (inProgress), triggered a
         report to the routing engine because a sample window threshold was
         exceeded (swReported), or the window was interrupted and discarded
         because administrative changes were detected during transmission
         (terminated)."
    ::= { tmnxOamLnkMeasIfResSWEntry 3 }

tmnxOamLnkMeasIfResSWSent        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWSent indicates the number of TWAMP
         packets that have been sent for this sample window.

         (A sent packet is a request for a response packet.)"
    ::= { tmnxOamLnkMeasIfResSWEntry 4 }

tmnxOamLnkMeasIfResSWReceived    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWReceived indicates the number of
         TWAMP packets that have been received for this sample window.

         (A received packet is a response to a sent request packet.)"
    ::= { tmnxOamLnkMeasIfResSWEntry 5 }

tmnxOamLnkMeasIfResSWMin         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWMin indicates the minimum of the
         series of delay measurements that occurred during this sample window.

         A value of zero indicates an invalid delay measurement (not a minimum
         delay measurement of zero)."
    ::= { tmnxOamLnkMeasIfResSWEntry 6 }

tmnxOamLnkMeasIfResSWMax         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWMax indicates the maximum of the
         series of delay measurements that occurred during this sample window.

         A value of zero indicates an invalid delay measurement (not a maximum
         delay measurement of zero)."
    ::= { tmnxOamLnkMeasIfResSWEntry 7 }

tmnxOamLnkMeasIfResSWAvg         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWAvg indicates the average of the
         series of delay measurements that occurred during this sample window.

         A value of zero indicates an invalid delay measurement (not an average
         delay measurement of zero)."
    ::= { tmnxOamLnkMeasIfResSWEntry 8 }

tmnxOamLnkMeasIfResSWErrors      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWErrors indicates the number of
         erroneous delay measurements that occurred in this sample window.

         Erroneous delay measurements are negative or zero measurements. These
         are caused by unsynchronized clocks."
    ::= { tmnxOamLnkMeasIfResSWEntry 9 }

tmnxOamLnkMeasIfResSWIntegrity   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWIntegrity indicates whether the
         percentage of successful request-response pairs of test packets met
         this sample window's configured integrity value.

         If the sample window does not have a integrity value configured then
         tmnxOamLnkMeasIfResSWIntegrity will always be true."
    ::= { tmnxOamLnkMeasIfResSWEntry 10 }

tmnxOamLnkMeasIfResSWResult      OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamLnkMeasIfResSWResult indicates the delay that was
         being evaluated for report according to
         tmnxOamLnkMeasTmplCtlDelayMeasTy when this sample window was open."
    ::= { tmnxOamLnkMeasIfResSWEntry 11 }

tmnxOamTestConformance           OBJECT IDENTIFIER ::= { tmnxSRConfs 11 }

tmnxOamPingConformance           OBJECT IDENTIFIER ::= { tmnxOamTestConformance 1 }

tmnxOamPingCompliances           OBJECT IDENTIFIER ::= { tmnxOamPingConformance 1 }

tmnxOamPing7450V4v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         7450 ESS series systems release 4.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV4v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV4v0Group,
            tmnxOamMfibPingV4v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamVccvPingGroup,
            tmnxOamIcmpPingGroup,
            tmnxOamPingNotificationV4v0Group
        }
    ::= { tmnxOamPingCompliances 4 }

tmnxOamPing7750V4v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         SROS series systems release 4.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV4v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV4v0Group,
            tmnxOamVprnPingV4v0Group,
            tmnxOamMfibPingV4v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamVccvPingGroup,
            tmnxOamIcmpPingGroup,
            tmnxOamPingNotificationV4v0Group
        }
    ::= { tmnxOamPingCompliances 5 }

tmnxOamPing7450V5v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         7450 ESS series systems release 5.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV4v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV5v0Group,
            tmnxOamMfibPingV4v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamPingNotificationV5v0Group
        }
    ::= { tmnxOamPingCompliances 6 }

tmnxOamPing7750V5v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         SROS series systems release 5.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV4v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV5v0Group,
            tmnxOamVprnPingV4v0Group,
            tmnxOamMfibPingV4v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamPingNotificationV5v0Group
        }
    ::= { tmnxOamPingCompliances 7 }

tmnxOamPing7450V6v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         7450 ESS series systems release 6.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV6v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamPingNotificationV5v0Group
        }
    ::= { tmnxOamPingCompliances 8 }

tmnxOamPing7750V6v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         SROS series systems release 6.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV6v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamVprnPingV4v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamPingNotificationV5v0Group
        }
    ::= { tmnxOamPingCompliances 9 }

tmnxOamPing7450V7v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         7450 ESS series systems release 7.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV7v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamPingNotificationV7v0Group
        }
    ::= { tmnxOamPingCompliances 10 }

tmnxOamPing7750V7v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         7750 and 7710 SR series systems release 7.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV7v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamVprnPingV4v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamPingNotificationV7v0Group,
            tmnxOamP2mpLspPingGroup
        }
    ::= { tmnxOamPingCompliances 11 }

tmnxOamPing7450V8v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         7450 ESS series systems release 8.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV8v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamEthCfmPingV8v0Group,
            tmnxOamPingNotificationV7v0Group
        }
    ::= { tmnxOamPingCompliances 12 }

tmnxOamPing77x0V8v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         7750 and 7710 SR series systems release 8.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV8v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamVprnPingV4v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamEthCfmPingV8v0Group,
            tmnxOamPingNotificationV7v0Group,
            tmnxOamP2mpLspPingGroup,
            tmnxOamP2mpLspPingV8v0Group
        }
    ::= { tmnxOamPingCompliances 13 }

tmnxOamPing7xx0V9v0Compliance    MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         SROS series systems, release 9.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV8v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamVprnPingV4v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamEthCfmPingV8v0Group,
            tmnxOamPingNotificationV7v0Group,
            tmnxOamP2mpLspPingGroup,
            tmnxOamP2mpLspPingV8v0Group,
            tmnxOamVccvPingV9v0Group
        }
    ::= { tmnxOamPingCompliances 14 }

tmnxOamPing7xx0V10v0Compliance   MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         SROS series systems, release 10.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingGeneralV10v0Group,
            tmnxOamMacPingV4v0Group,
            tmnxOamLspPingV6v0Group,
            tmnxOamVprnPingV4v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamAncpTestV5v0Group,
            tmnxOamEthCfmPingV8v0Group,
            tmnxOamPingNotificationV7v0Group,
            tmnxOamP2mpLspPingGroup,
            tmnxOamP2mpLspPingV8v0Group,
            tmnxOamVccvPingV9v0Group,
            tmnxOamPingCtlV10v0Group,
            tmnxOamMobilePingGroup,
            tmnxOamP2mpLspPingV10v0Group
        }
    ::= { tmnxOamPingCompliances 15 }

tmnxOamPing7xx0V11v0Compliance   MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         SROS series systems, release 11.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamAncpTestV5v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamEthCfmPingV8v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamLspPingV11v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamMacPingCtlV11v0Group,
            tmnxOamMacPingHistoryV11v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamMobilePingGroup,
            tmnxOamP2mpLspPingGroup,
            tmnxOamP2mpLspPingV10v0Group,
            tmnxOamP2mpLspPingV8v0Group,
            tmnxOamPingCtlV10v0Group,
            tmnxOamPingGeneralV10v0Group,
            tmnxOamPingNotificationV7v0Group,
            tmnxOamPingV11v0Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamVccvPingV9v0Group,
            tmnxOamVccvPingV11v0Group,
            tmnxOamVprnPingV4v0Group
        }
    ::= { tmnxOamPingCompliances 16 }

tmnxOamPing7xx0V12v0Compliance   MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM ping tests on Nokia
         SROS series systems, release 12.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamAncpTestV5v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamEthCfmPingV8v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamLspPingV11v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamMacPingCtlV11v0Group,
            tmnxOamMacPingHistoryV11v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamMobilePingGroup,
            tmnxOamP2mpLspPingGroup,
            tmnxOamP2mpLspPingV8v0Group,
            tmnxOamP2mpLspPingV10v0Group,
            tmnxOamPingCtlV10v0Group,
            tmnxOamPingGeneralV10v0Group,
            tmnxOamPingNotificationV7v0Group,
            tmnxOamPingV11v0Group,
            tmnxOamPingV12v0Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamVccvPingV9v0Group,
            tmnxOamVccvPingV11v0Group,
            tmnxOamVprnPingV4v0Group
        }
    ::= { tmnxOamPingCompliances 17 }

tmnxOamPing7xx0V13v0Compliance   MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM ping OBJECT-GROUPs added in Nokia
         SROS series systems, release 13.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingV13v0Group
        }
    ::= { tmnxOamPingCompliances 18 }

tmnxOamPing7xx0V14v0Compliance   MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM ping OBJECT-GROUPs added in Nokia
         SROS series systems, release 14.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingV14v0Group
        }
    ::= { tmnxOamPingCompliances 19 }

tmnxOamPing7xx0V15v0Compliance   MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM ping OBJECT-GROUPs added in Nokia
         SROS series systems, release 15.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingV15v0Group
        }
    ::= { tmnxOamPingCompliances 20 }

tmnxOamPing7xx0V16v0Compliance   MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM ping OBJECT-GROUPs added in Nokia
         SROS series systems, release 16.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingNotificationV7v0Group,
            tmnxOamAncpTestV5v0Group,
            tmnxOamAtmPingR2r1Group,
            tmnxOamCpePingV4v0Group,
            tmnxOamEthCfmPingV8v0Group,
            tmnxOamIcmpPingGroup,
            tmnxOamLspPingV11v0Group,
            tmnxOamMRInfoV4v0Group,
            tmnxOamMacPingCtlV11v0Group,
            tmnxOamMacPingHistoryV11v0Group,
            tmnxOamMfibPingV6v0Group,
            tmnxOamMobilePingV16v0Group,
            tmnxOamP2mpLspPingGroup,
            tmnxOamP2mpLspPingV8v0Group,
            tmnxOamP2mpLspPingV10v0Group,
            tmnxOamPingCtlV10v0Group,
            tmnxOamPingGeneralV10v0Group,
            tmnxOamPingObsoletedV16v0Group,
            tmnxOamPingV11v0Group,
            tmnxOamPingV12v0Group,
            tmnxOamPingV16v0Group,
            tmnxOamTrV16v0Group,
            tmnxOamVccvPingV5v0Group,
            tmnxOamVccvPingV9v0Group,
            tmnxOamVccvPingV11v0Group,
            tmnxOamVprnPingV4v0Group
        }
    ::= { tmnxOamPingCompliances 21 }

tmnxOamPing7xx0V19v0Compliance   MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM ping OBJECT-GROUPs added in Nokia
         SROS series systems, release 19.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamPingV19v0Group
        }
    ::= { tmnxOamPingCompliances 22 }

tmnxOamPing7xx0V20v0Compliance   MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM ping OBJECT-GROUPs added in Nokia
         SROS series systems, release 20."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamBierPingV20v0Group
        }
    ::= { tmnxOamPingCompliances 23 }

tmnxOamPingGroups                OBJECT IDENTIFIER ::= { tmnxOamPingConformance 2 }

tmnxOamMacPingL2MapGroup         OBJECT-GROUP
    OBJECTS     {
        tmnxOamMacPingL2MapRouterID,
        tmnxOamMacPingL2MapLabel,
        tmnxOamMacPingL2MapProtocol,
        tmnxOamMacPingL2MapVCType,
        tmnxOamMacPingL2MapVCID,
        tmnxOamMacPingL2MapDirection
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of optional objects to report OAM Mac Ping layer-2 mapping
         information returned in response to OAM Mac Ping tests on Nokia SROS
         series systems."
    ::= { tmnxOamPingGroups 3 }

tmnxOamAtmPingR2r1Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamAtmPingCtlPortId,
        tmnxOamAtmPingCtlVpi,
        tmnxOamAtmPingCtlVci,
        tmnxOamAtmPingCtlLpbkLocation,
        tmnxOamAtmPingCtlSegment
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ATM Ping tests on
         Nokia SROS series systems."
    ::= { tmnxOamPingGroups 8 }

tmnxOamMacPingV4v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamMacPingCtlTargetMacAddr,
        tmnxOamMacPingCtlSourceMacAddr,
        tmnxOamMacPingCtlSendControl,
        tmnxOamMacPingCtlReplyControl,
        tmnxOamMacPingCtlTtl,
        tmnxOamMacPingCtlRegister,
        tmnxOamMacPingCtlFlood,
        tmnxOamMacPingCtlForce,
        tmnxOamMacPingCtlAge,
        tmnxOamMacPingCtlSapPortId,
        tmnxOamMacPingCtlSapEncapValue,
        tmnxOamMacPingCtlFibEntryName,
        tmnxOamMacPingHistoryResponse,
        tmnxOamMacPingHistoryOneWayTime,
        tmnxOamMacPingHistoryStatus,
        tmnxOamMacPingHistoryTime,
        tmnxOamMacPingHistoryReturnCode,
        tmnxOamMacPingHistoryAddressType,
        tmnxOamMacPingHistorySapId,
        tmnxOamMacPingHistorySdpId,
        tmnxOamMacPingHistoryAdminStatus,
        tmnxOamMacPingHistoryOperStatus,
        tmnxOamMacPingHistoryResponsePlane,
        tmnxOamMacPingHistorySize,
        tmnxOamMacPingHistoryInOneWayTime,
        tmnxOamMacPingHistorySrcAddrType,
        tmnxOamMacPingHistorySrcAddress
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM Mac Ping tests on
         Nokia SROS series systems release 4.0."
    ::= { tmnxOamPingGroups 14 }

tmnxOamVccvPingGroup             OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvPingCtlSdpIdVcId,
        tmnxOamVccvPingCtlReplyMode
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM VCCV Ping tests on
         Nokia SROS series systems."
    ::= { tmnxOamPingGroups 15 }

tmnxOamPingGeneralV4v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingMaxConcurrentTests,
        tmnxOamPingCtlRowStatus,
        tmnxOamPingCtlStorageType,
        tmnxOamPingCtlDescr,
        tmnxOamPingCtlTestMode,
        tmnxOamPingCtlAdminStatus,
        tmnxOamPingCtlOrigSdpId,
        tmnxOamPingCtlRespSdpId,
        tmnxOamPingCtlFcName,
        tmnxOamPingCtlProfile,
        tmnxOamPingCtlMtuStartSize,
        tmnxOamPingCtlMtuEndSize,
        tmnxOamPingCtlMtuStepSize,
        tmnxOamPingCtlServiceId,
        tmnxOamPingCtlLocalSdp,
        tmnxOamPingCtlRemoteSdp,
        tmnxOamPingCtlSize,
        tmnxOamPingCtlTimeOut,
        tmnxOamPingCtlProbeCount,
        tmnxOamPingCtlInterval,
        tmnxOamPingCtlMaxRows,
        tmnxOamPingCtlTrapGeneration,
        tmnxOamPingCtlTrapProbeFailureFilter,
        tmnxOamPingCtlTrapTestFailureFilter,
        tmnxOamPingCtlSAA,
        tmnxOamPingCtlRuns,
        tmnxOamPingCtlFailures,
        tmnxOamPingCtlLastRunResult,
        tmnxOamPingCtlLastChanged,
        tmnxOamPingCtlVRtrID,
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingCtlSrcAddrType,
        tmnxOamPingCtlSrcAddress,
        tmnxOamPingCtlDnsName,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe,
        tmnxOamPingResultsLastRespHeader,
        tmnxOamPingResultsMinTt,
        tmnxOamPingResultsMaxTt,
        tmnxOamPingResultsAverageTt,
        tmnxOamPingResultsTtSumOfSquares,
        tmnxOamPingResultsMinInTt,
        tmnxOamPingResultsMaxInTt,
        tmnxOamPingResultsAverageInTt,
        tmnxOamPingResultsInTtSumOfSqrs,
        tmnxOamPingResultsOutJitter,
        tmnxOamPingResultsInJitter,
        tmnxOamPingResultsRtJitter,
        tmnxOamPingResultsProbeTimeouts,
        tmnxOamPingResultsProbeFailures,
        tmnxOamPingHistoryResponse,
        tmnxOamPingHistoryOneWayTime,
        tmnxOamPingHistorySize,
        tmnxOamPingHistoryStatus,
        tmnxOamPingHistoryTime,
        tmnxOamPingHistoryReturnCode,
        tmnxOamPingHistAddressType,
        tmnxOamPingHistoryVersion,
        tmnxOamPingHistSapId,
        tmnxOamPingHistoryCpeMacAddr,
        tmnxOamPingHistoryRespSvcId,
        tmnxOamPingHistorySequence,
        tmnxOamPingHistoryIfIndex,
        tmnxOamPingHistoryDataLen,
        tmnxOamPingHistoryRespPlane,
        tmnxOamPingHistoryReqHdr,
        tmnxOamPingHistoryRespHdr,
        tmnxOamPingHistoryDnsAddrType,
        tmnxOamPingHistoryDnsAddress,
        tmnxOamPingHistorySrcAddrType,
        tmnxOamPingHistorySrcAddress,
        tmnxOamPingHistoryInOneWayTime
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM ping tests general
         capabilities on Nokia SROS series systems 4.0 release."
    ::= { tmnxOamPingGroups 16 }

tmnxOamLspPingV4v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspPingCtlVRtrID,
        tmnxOamLspPingCtlLspName,
        tmnxOamLspPingCtlReturnLsp,
        tmnxOamLspPingCtlTtl,
        tmnxOamLspPingCtlPathName,
        tmnxOamLspPingCtlLdpPrefixType,
        tmnxOamLspPingCtlLdpPrefix,
        tmnxOamLspPingCtlLdpPrefixLen
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM LSP Ping tests on
         Nokia SROS series systems 4.0 release."
    ::= { tmnxOamPingGroups 17 }

tmnxOamVprnPingV4v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamVprnPingCtlReplyControl,
        tmnxOamVprnPingCtlTtl,
        tmnxOamVprnPingCtlSrcAddrType,
        tmnxOamVprnPingCtlSrcAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM VPRN Ping tests on
         Nokia SROS series systems 4.0 release."
    ::= { tmnxOamPingGroups 19 }

tmnxOamMfibPingV4v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamMfibPingCtlReplyControl,
        tmnxOamMfibPingCtlTtl,
        tmnxOamMfibPingCtlSrcAddrType,
        tmnxOamMfibPingCtlSrcAddress,
        tmnxOamMfibPingCtlDestAddrType,
        tmnxOamMfibPingCtlDestAddress,
        tmnxOamPingHistoryRespSvcId
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM MFIB Ping tests on
         Nokia SROS series systems release 4.0."
    ::= { tmnxOamPingGroups 20 }

tmnxOamCpePingV4v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamCpePingCtlSendControl,
        tmnxOamCpePingCtlReplyControl,
        tmnxOamCpePingCtlTtl,
        tmnxOamCpePingCtlSrceMacAddr,
        tmnxOamCpePingCtlSrcAddrType,
        tmnxOamCpePingCtlSrcAddress,
        tmnxOamPingHistoryCpeMacAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM CPE Ping tests on
         Nokia SROS series systems release 4.0."
    ::= { tmnxOamPingGroups 21 }

tmnxOamMRInfoV4v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOamMRInfoRespCapabilities,
        tmnxOamMRInfoRespMinorVersion,
        tmnxOamMRInfoRespMajorVersion,
        tmnxOamMRInfoRespNumInterfaces,
        tmnxOamMRInfoRespIfMetric,
        tmnxOamMRInfoRespIfThreshold,
        tmnxOamMRInfoRespIfFlags,
        tmnxOamMRInfoRespIfNbrCount,
        tmnxOamMRInfoRespIfAddrType,
        tmnxOamMRInfoRespIfAddr,
        tmnxOamMRInfoRespIfNbrAddrType,
        tmnxOamMRInfoRespIfNbrAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Multicast Router
         Information ('mrInfo') tests on Nokia SROS series systems release 4.0."
    ::= { tmnxOamPingGroups 22 }

tmnxOamIcmpPingGroup             OBJECT-GROUP
    OBJECTS     {
        tmnxOamIcmpPingCtlRapid,
        tmnxOamIcmpPingCtlTtl,
        tmnxOamIcmpPingCtlDSField,
        tmnxOamIcmpPingCtlPattern,
        tmnxOamIcmpPingCtlNhAddrType,
        tmnxOamIcmpPingCtlNhAddress,
        tmnxOamIcmpPingCtlEgrIfIndex,
        tmnxOamIcmpPingCtlEgrIfName,
        tmnxOamIcmpPingCtlBypassRouting,
        tmnxOamIcmpPingCtlDoNotFragment
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ICMP Ping tests on
         Nokia SROS series systems."
    ::= { tmnxOamPingGroups 23 }

tmnxOamPingObsoleteV4v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingCtlTargetIpAddress,
        tmnxOamPingHistorySrcIpAddress,
        tmnxOamMacPingHistorySrcIpAddress,
        tmnxOamLspPingCtlLdpIpPrefix,
        tmnxOamLspPingCtlLdpIpPrefixLen,
        tmnxOamVprnPingCtlSourceIpAddr,
        tmnxOamMfibPingCtlSourceIpAddr,
        tmnxOamMfibPingCtlDestIpAddr,
        tmnxOamCpePingCtlSourceIpAddr,
        tmnxOamMRInfoRespIfAddress,
        tmnxOamMRInfoRespIfNbrAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ICMP Ping tests on
         Nokia SROS series systems that were made obsolete in release 4.0."
    ::= { tmnxOamPingGroups 24 }

tmnxOamPingNotificationV4v0Group NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamPingProbeFailedV2,
        tmnxOamPingTestFailedV2,
        tmnxOamPingTestCompletedV2
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting the OAM ping feature on Nokia
         SROS series systems release 4.0."
    ::= { tmnxOamPingGroups 25 }

tmnxOamPingNotificationObsoleteV4v0Group NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamPingProbeFailed,
        tmnxOamPingTestFailed,
        tmnxOamPingTestCompleted
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the OAM ping feature on Nokia
         SROS series systems release 4.0."
    ::= { tmnxOamPingGroups 26 }

tmnxOamLspPingV5v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspPingCtlVRtrID,
        tmnxOamLspPingCtlLspName,
        tmnxOamLspPingCtlReturnLsp,
        tmnxOamLspPingCtlTtl,
        tmnxOamLspPingCtlPathName,
        tmnxOamLspPingCtlLdpPrefixType,
        tmnxOamLspPingCtlLdpPrefix,
        tmnxOamLspPingCtlLdpPrefixLen,
        tmnxOamLspPingCtlPathDestType,
        tmnxOamLspPingCtlPathDest,
        tmnxOamLspPingCtlNhIntfName,
        tmnxOamLspPingCtlNhAddressType,
        tmnxOamLspPingCtlNhAddress
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM LSP Ping tests on
         Nokia SROS series systems 5.0 release."
    ::= { tmnxOamPingGroups 27 }

tmnxOamVccvPingV5v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvPingCtlSdpIdVcId,
        tmnxOamVccvPingCtlReplyMode,
        tmnxOamVccvPingCtlPwId,
        tmnxOamVccvPingCtlTtl
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM VCCV Ping tests on
         Nokia SROS series systems 5.0 release."
    ::= { tmnxOamPingGroups 28 }

tmnxOamAncpTestV5v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamAncpTestTarget,
        tmnxOamAncpTestTargetId,
        tmnxOamAncpTestcount,
        tmnxOamAncpTestTimeout,
        tmnxOamAncpHistoryAncpString,
        tmnxOamAncpHistoryAccNodeResult,
        tmnxOamAncpHistoryAccNodeCode,
        tmnxOamAncpHistoryAccNodeRspStr,
        tmnxOamVccvPingCtlTtl
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ANCP tests on Nokia
         SROS series systems 5.0 release."
    ::= { tmnxOamPingGroups 29 }

tmnxOamPingNotificationV5v0Group NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamPingProbeFailedV2,
        tmnxOamPingTestFailedV2,
        tmnxOamPingTestCompletedV2,
        tmnxAncpLoopbackTestCompleted
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting the OAM ping feature on Nokia
         SROS series systems release 5.0."
    ::= { tmnxOamPingGroups 30 }

tmnxOamMfibPingV6v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamMfibPingCtlReplyControl,
        tmnxOamMfibPingCtlTtl,
        tmnxOamMfibPingCtlSrcAddrType,
        tmnxOamMfibPingCtlSrcAddress,
        tmnxOamMfibPingCtlDestAddrType,
        tmnxOamMfibPingCtlDestAddress,
        tmnxOamPingHistoryRespSvcId,
        tmnxOamMfibPingCtlDestMacAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM MFIB Ping tests on
         Nokia SROS series systems release 6.0."
    ::= { tmnxOamPingGroups 31 }

tmnxOamPingGeneralV6v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingMaxConcurrentTests,
        tmnxOamPingCtlRowStatus,
        tmnxOamPingCtlStorageType,
        tmnxOamPingCtlDescr,
        tmnxOamPingCtlTestMode,
        tmnxOamPingCtlAdminStatus,
        tmnxOamPingCtlOrigSdpId,
        tmnxOamPingCtlRespSdpId,
        tmnxOamPingCtlFcName,
        tmnxOamPingCtlProfile,
        tmnxOamPingCtlMtuStartSize,
        tmnxOamPingCtlMtuEndSize,
        tmnxOamPingCtlMtuStepSize,
        tmnxOamPingCtlServiceId,
        tmnxOamPingCtlLocalSdp,
        tmnxOamPingCtlRemoteSdp,
        tmnxOamPingCtlSize,
        tmnxOamPingCtlTimeOut,
        tmnxOamPingCtlProbeCount,
        tmnxOamPingCtlInterval,
        tmnxOamPingCtlTrapGeneration,
        tmnxOamPingCtlTrapProbeFailureFilter,
        tmnxOamPingCtlTrapTestFailureFilter,
        tmnxOamPingCtlSAA,
        tmnxOamPingCtlRuns,
        tmnxOamPingCtlFailures,
        tmnxOamPingCtlLastRunResult,
        tmnxOamPingCtlLastChanged,
        tmnxOamPingCtlVRtrID,
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingCtlSrcAddrType,
        tmnxOamPingCtlSrcAddress,
        tmnxOamPingCtlDnsName,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe,
        tmnxOamPingResultsLastRespHeader,
        tmnxOamPingResultsMinTt,
        tmnxOamPingResultsMaxTt,
        tmnxOamPingResultsAverageTt,
        tmnxOamPingResultsTtSumOfSquares,
        tmnxOamPingResultsMinInTt,
        tmnxOamPingResultsMaxInTt,
        tmnxOamPingResultsAverageInTt,
        tmnxOamPingResultsInTtSumOfSqrs,
        tmnxOamPingResultsOutJitter,
        tmnxOamPingResultsInJitter,
        tmnxOamPingResultsRtJitter,
        tmnxOamPingResultsProbeTimeouts,
        tmnxOamPingResultsProbeFailures,
        tmnxOamPingHistoryResponse,
        tmnxOamPingHistoryOneWayTime,
        tmnxOamPingHistorySize,
        tmnxOamPingHistoryStatus,
        tmnxOamPingHistoryTime,
        tmnxOamPingHistoryReturnCode,
        tmnxOamPingHistAddressType,
        tmnxOamPingHistoryVersion,
        tmnxOamPingHistSapId,
        tmnxOamPingHistoryCpeMacAddr,
        tmnxOamPingHistoryRespSvcId,
        tmnxOamPingHistorySequence,
        tmnxOamPingHistoryIfIndex,
        tmnxOamPingHistoryDataLen,
        tmnxOamPingHistoryRespPlane,
        tmnxOamPingHistoryReqHdr,
        tmnxOamPingHistoryRespHdr,
        tmnxOamPingHistoryDnsAddrType,
        tmnxOamPingHistoryDnsAddress,
        tmnxOamPingHistorySrcAddrType,
        tmnxOamPingHistorySrcAddress,
        tmnxOamPingHistoryInOneWayTime,
        tmnxOamPingCtlDNSRecord
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM ping tests general
         capabilities on Nokia SROS series systems 6.0 release."
    ::= { tmnxOamPingGroups 32 }

tmnxOamP2mpLspPingGroup          OBJECT-GROUP
    OBJECTS     {
        tmnxOamP2mpLspPingCtlLspName,
        tmnxOamP2mpLspPingCtlInstName,
        tmnxOamP2mpLspPingCtlTtl,
        tmnxOamP2mpLspPingCtlIpRowStatus,
        tmnxOamP2mpLspPingCtlIpAddrType,
        tmnxOamP2mpLspPingCtlIpAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of P2MP LSP Ping tests on
         Nokia SROS series systems 7.0 release."
    ::= { tmnxOamPingGroups 33 }

tmnxOamLspPingV6v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspPingCtlLspName,
        tmnxOamLspPingCtlTtl,
        tmnxOamLspPingCtlPathName,
        tmnxOamLspPingCtlLdpPrefixType,
        tmnxOamLspPingCtlLdpPrefix,
        tmnxOamLspPingCtlLdpPrefixLen,
        tmnxOamLspPingCtlPathDestType,
        tmnxOamLspPingCtlPathDest,
        tmnxOamLspPingCtlNhIntfName,
        tmnxOamLspPingCtlNhAddressType,
        tmnxOamLspPingCtlNhAddress
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM LSP Ping tests on
         Nokia SROS series systems 6.0 release."
    ::= { tmnxOamPingGroups 34 }

tmnxOamPingGeneralV7v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingMaxConcurrentTests,
        tmnxOamPingCtlRowStatus,
        tmnxOamPingCtlStorageType,
        tmnxOamPingCtlDescr,
        tmnxOamPingCtlTestMode,
        tmnxOamPingCtlAdminStatus,
        tmnxOamPingCtlOrigSdpId,
        tmnxOamPingCtlRespSdpId,
        tmnxOamPingCtlFcName,
        tmnxOamPingCtlProfile,
        tmnxOamPingCtlMtuStartSize,
        tmnxOamPingCtlMtuEndSize,
        tmnxOamPingCtlMtuStepSize,
        tmnxOamPingCtlServiceId,
        tmnxOamPingCtlLocalSdp,
        tmnxOamPingCtlRemoteSdp,
        tmnxOamPingCtlSize,
        tmnxOamPingCtlTimeOut,
        tmnxOamPingCtlProbeCount,
        tmnxOamPingCtlInterval,
        tmnxOamPingCtlTrapGeneration,
        tmnxOamPingCtlTrapProbeFailureFilter,
        tmnxOamPingCtlTrapTestFailureFilter,
        tmnxOamPingCtlSAA,
        tmnxOamPingCtlRuns,
        tmnxOamPingCtlFailures,
        tmnxOamPingCtlLastRunResult,
        tmnxOamPingCtlLastChanged,
        tmnxOamPingCtlVRtrID,
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingCtlSrcAddrType,
        tmnxOamPingCtlSrcAddress,
        tmnxOamPingCtlDnsName,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe,
        tmnxOamPingResultsLastRespHeader,
        tmnxOamPingResultsMinTt,
        tmnxOamPingResultsMaxTt,
        tmnxOamPingResultsAverageTt,
        tmnxOamPingResultsTtSumOfSquares,
        tmnxOamPingResultsMinInTt,
        tmnxOamPingResultsMaxInTt,
        tmnxOamPingResultsAverageInTt,
        tmnxOamPingResultsInTtSumOfSqrs,
        tmnxOamPingResultsOutJitter,
        tmnxOamPingResultsInJitter,
        tmnxOamPingResultsRtJitter,
        tmnxOamPingResultsProbeTimeouts,
        tmnxOamPingResultsProbeFailures,
        tmnxOamPingHistoryResponse,
        tmnxOamPingHistoryOneWayTime,
        tmnxOamPingHistorySize,
        tmnxOamPingHistoryStatus,
        tmnxOamPingHistoryTime,
        tmnxOamPingHistoryReturnCode,
        tmnxOamPingHistAddressType,
        tmnxOamPingHistoryVersion,
        tmnxOamPingHistSapId,
        tmnxOamPingHistoryCpeMacAddr,
        tmnxOamPingHistoryRespSvcId,
        tmnxOamPingHistorySequence,
        tmnxOamPingHistoryIfIndex,
        tmnxOamPingHistoryDataLen,
        tmnxOamPingHistoryRespPlane,
        tmnxOamPingHistoryReqHdr,
        tmnxOamPingHistoryRespHdr,
        tmnxOamPingHistoryDnsAddrType,
        tmnxOamPingHistoryDnsAddress,
        tmnxOamPingHistorySrcAddrType,
        tmnxOamPingHistorySrcAddress,
        tmnxOamPingHistoryInOneWayTime,
        tmnxOamPingCtlDNSRecord,
        tmnxOamPingResultsRttOFSumSquares,
        tmnxOamPingResultsRttHCSumSquares,
        tmnxOamPingResultsTtOFSumSquares,
        tmnxOamPingResultsTtHCSumSquares,
        tmnxOamPingResultsInTtOFSumSqrs,
        tmnxOamPingResultsInTtHCSumSqrs,
        tmnxOamPingResultsTestRunResult
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM ping tests general
         capabilities on Nokia SROS series systems 7.0 release."
    ::= { tmnxOamPingGroups 35 }

tmnxOamPingNotificationV7v0Group NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamPingProbeFailedV3,
        tmnxOamPingTestFailedV3,
        tmnxOamPingTestCompletedV3,
        tmnxAncpLoopbackTestCompleted
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the OAM ping feature on Nokia
         SROS series systems release 7.0."
    ::= { tmnxOamPingGroups 36 }

tmnxOamPingObsoleteV6v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspPingCtlReturnLsp,
        tmnxOamLspPingCtlVRtrID,
        tmnxOamPingCtlMaxRows
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ping operations on
         Nokia SR series systems that were made obsolete in release 6.0."
    ::= { tmnxOamPingGroups 37 }

tmnxOamPingObsoleteV6v1Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamMacPingL2MapRouterID,
        tmnxOamMacPingL2MapLabel,
        tmnxOamMacPingL2MapProtocol,
        tmnxOamMacPingL2MapVCType,
        tmnxOamMacPingL2MapVCID,
        tmnxOamMacPingL2MapDirection
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ping operations on
         Nokia SR series systems that were made obsolete in release 6.1."
    ::= { tmnxOamPingGroups 38 }

tmnxOamEthCfmPingV8v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamEthCfmPingCtlTgtMacAddr,
        tmnxOamEthCfmPingCtlSrcMdIndex,
        tmnxOamEthCfmPingCtlSrcMaIndex,
        tmnxOamEthCfmPingCtlSrcMepId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Ethernet CFM Ping
         tests on Nokia SROS series systems 8.0 release."
    ::= { tmnxOamPingGroups 39 }

tmnxOamP2mpLspPingV8v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamP2mpLspPingCtlP2MPId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM P2MP LSP Ping tests
         on Nokia SROS series systems 8.0 release."
    ::= { tmnxOamPingGroups 40 }

tmnxOamPingGeneralV8v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingMaxConcurrentTests,
        tmnxOamPingCtlRowStatus,
        tmnxOamPingCtlStorageType,
        tmnxOamPingCtlDescr,
        tmnxOamPingCtlTestMode,
        tmnxOamPingCtlAdminStatus,
        tmnxOamPingCtlOrigSdpId,
        tmnxOamPingCtlRespSdpId,
        tmnxOamPingCtlFcName,
        tmnxOamPingCtlProfile,
        tmnxOamPingCtlMtuStartSize,
        tmnxOamPingCtlMtuEndSize,
        tmnxOamPingCtlMtuStepSize,
        tmnxOamPingCtlServiceId,
        tmnxOamPingCtlLocalSdp,
        tmnxOamPingCtlRemoteSdp,
        tmnxOamPingCtlSize,
        tmnxOamPingCtlTimeOut,
        tmnxOamPingCtlProbeCount,
        tmnxOamPingCtlInterval,
        tmnxOamPingCtlTrapGeneration,
        tmnxOamPingCtlTrapProbeFailureFilter,
        tmnxOamPingCtlTrapTestFailureFilter,
        tmnxOamPingCtlSAA,
        tmnxOamPingCtlRuns,
        tmnxOamPingCtlFailures,
        tmnxOamPingCtlLastRunResult,
        tmnxOamPingCtlLastChanged,
        tmnxOamPingCtlVRtrID,
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingCtlSrcAddrType,
        tmnxOamPingCtlSrcAddress,
        tmnxOamPingCtlDnsName,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe,
        tmnxOamPingResultsMinTt,
        tmnxOamPingResultsMaxTt,
        tmnxOamPingResultsAverageTt,
        tmnxOamPingResultsTtSumOfSquares,
        tmnxOamPingResultsMinInTt,
        tmnxOamPingResultsMaxInTt,
        tmnxOamPingResultsAverageInTt,
        tmnxOamPingResultsInTtSumOfSqrs,
        tmnxOamPingResultsOutJitter,
        tmnxOamPingResultsInJitter,
        tmnxOamPingResultsRtJitter,
        tmnxOamPingResultsProbeTimeouts,
        tmnxOamPingResultsProbeFailures,
        tmnxOamPingHistoryResponse,
        tmnxOamPingHistoryOneWayTime,
        tmnxOamPingHistorySize,
        tmnxOamPingHistoryStatus,
        tmnxOamPingHistoryTime,
        tmnxOamPingHistoryReturnCode,
        tmnxOamPingHistAddressType,
        tmnxOamPingHistoryVersion,
        tmnxOamPingHistSapId,
        tmnxOamPingHistoryCpeMacAddr,
        tmnxOamPingHistoryRespSvcId,
        tmnxOamPingHistorySequence,
        tmnxOamPingHistoryIfIndex,
        tmnxOamPingHistoryDataLen,
        tmnxOamPingHistoryRespPlane,
        tmnxOamPingHistoryReqHdr,
        tmnxOamPingHistoryRespHdr,
        tmnxOamPingHistoryDnsAddrType,
        tmnxOamPingHistoryDnsAddress,
        tmnxOamPingHistorySrcAddrType,
        tmnxOamPingHistorySrcAddress,
        tmnxOamPingHistoryInOneWayTime,
        tmnxOamPingHistoryLspName,
        tmnxOamPingHistNextHopAddrType,
        tmnxOamPingHistNextHopAddress,
        tmnxOamPingCtlDNSRecord,
        tmnxOamPingResultsRttOFSumSquares,
        tmnxOamPingResultsRttHCSumSquares,
        tmnxOamPingResultsTtOFSumSquares,
        tmnxOamPingResultsTtHCSumSquares,
        tmnxOamPingResultsInTtOFSumSqrs,
        tmnxOamPingResultsInTtHCSumSqrs,
        tmnxOamPingResultsTestRunResult
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM ping tests general
         capabilities on Nokia SROS series systems 8.0 release."
    ::= { tmnxOamPingGroups 41 }

tmnxOamPingObsoleteV8v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingResultsLastRespHeader
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ping operations on
         Nokia SR series systems that were made obsolete in release 8.0."
    ::= { tmnxOamPingGroups 42 }

tmnxOamVccvPingV9v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvPingCtlSpokeSdpId,
        tmnxOamVccvPingCtlSaiiGlobalId,
        tmnxOamVccvPingCtlSaiiPrefix,
        tmnxOamVccvPingCtlSaiiAcId,
        tmnxOamVccvPingCtlTaiiGlobalId,
        tmnxOamVccvPingCtlTaiiPrefix,
        tmnxOamVccvPingCtlTaiiAcId
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM VCCV Ping
         tests on Nokia SROS series systems 9.0 release."
    ::= { tmnxOamPingGroups 43 }

tmnxOamPingCtlV10v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingCtlIntervalUnits
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM ping
         tests on Nokia SROS series systems, release 10.0."
    ::= { tmnxOamPingGroups 44 }

tmnxOamMobilePingGroup           OBJECT-GROUP
    OBJECTS     {
        tmnxOamMobGtpPingRefPointType,
        tmnxOamMobGtpPingVRtrId,
        tmnxOamMobGtpPingPort,
        tmnxOamMobGtpPingGateway
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM mobile gateway ping
         tests on Nokia 7x50 SR series systems."
    ::= { tmnxOamPingGroups 45 }

tmnxOamPingObsoleteV10v0Group    OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingHistoryReqHdr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ping operations made
         obsolete in SROS Release 10.0 R1."
    ::= { tmnxOamPingGroups 46 }

tmnxOamPingGeneralV10v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingMaxConcurrentTests,
        tmnxOamPingCtlRowStatus,
        tmnxOamPingCtlTestMode,
        tmnxOamPingCtlAdminStatus,
        tmnxOamPingCtlOrigSdpId,
        tmnxOamPingCtlRespSdpId,
        tmnxOamPingCtlFcName,
        tmnxOamPingCtlProfile,
        tmnxOamPingCtlMtuStartSize,
        tmnxOamPingCtlMtuEndSize,
        tmnxOamPingCtlMtuStepSize,
        tmnxOamPingCtlServiceId,
        tmnxOamPingCtlLocalSdp,
        tmnxOamPingCtlRemoteSdp,
        tmnxOamPingCtlSize,
        tmnxOamPingCtlTimeOut,
        tmnxOamPingCtlProbeCount,
        tmnxOamPingCtlInterval,
        tmnxOamPingCtlTrapGeneration,
        tmnxOamPingCtlTrapProbeFailureFilter,
        tmnxOamPingCtlTrapTestFailureFilter,
        tmnxOamPingCtlSAA,
        tmnxOamPingCtlRuns,
        tmnxOamPingCtlFailures,
        tmnxOamPingCtlLastRunResult,
        tmnxOamPingCtlLastChanged,
        tmnxOamPingCtlVRtrID,
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingCtlSrcAddrType,
        tmnxOamPingCtlSrcAddress,
        tmnxOamPingCtlDnsName,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe,
        tmnxOamPingResultsMinTt,
        tmnxOamPingResultsMaxTt,
        tmnxOamPingResultsAverageTt,
        tmnxOamPingResultsTtSumOfSquares,
        tmnxOamPingResultsMinInTt,
        tmnxOamPingResultsMaxInTt,
        tmnxOamPingResultsAverageInTt,
        tmnxOamPingResultsInTtSumOfSqrs,
        tmnxOamPingResultsOutJitter,
        tmnxOamPingResultsInJitter,
        tmnxOamPingResultsRtJitter,
        tmnxOamPingResultsProbeTimeouts,
        tmnxOamPingResultsProbeFailures,
        tmnxOamPingHistoryResponse,
        tmnxOamPingHistoryOneWayTime,
        tmnxOamPingHistorySize,
        tmnxOamPingHistoryStatus,
        tmnxOamPingHistoryTime,
        tmnxOamPingHistoryReturnCode,
        tmnxOamPingHistAddressType,
        tmnxOamPingHistoryVersion,
        tmnxOamPingHistSapId,
        tmnxOamPingHistoryCpeMacAddr,
        tmnxOamPingHistoryRespSvcId,
        tmnxOamPingHistorySequence,
        tmnxOamPingHistoryIfIndex,
        tmnxOamPingHistoryDataLen,
        tmnxOamPingHistoryRespPlane,
        tmnxOamPingHistoryRespHdr,
        tmnxOamPingHistoryDnsAddrType,
        tmnxOamPingHistoryDnsAddress,
        tmnxOamPingHistorySrcAddrType,
        tmnxOamPingHistorySrcAddress,
        tmnxOamPingHistoryInOneWayTime,
        tmnxOamPingHistoryLspName,
        tmnxOamPingHistNextHopAddrType,
        tmnxOamPingHistNextHopAddress,
        tmnxOamPingCtlDNSRecord,
        tmnxOamPingResultsRttOFSumSquares,
        tmnxOamPingResultsRttHCSumSquares,
        tmnxOamPingResultsTtOFSumSquares,
        tmnxOamPingResultsTtHCSumSquares,
        tmnxOamPingResultsInTtOFSumSqrs,
        tmnxOamPingResultsInTtHCSumSqrs,
        tmnxOamPingResultsTestRunResult
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ping tests general
         capabilities on SROS release 10.0, and still supported in the latest
         SROS release."
    ::= { tmnxOamPingGroups 47 }

tmnxOamP2mpLspPingV10v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamP2mpLspPingCtlSrcAddrType,
        tmnxOamP2mpLspPingCtlSrcAddr,
        tmnxOamP2mpLspPingCtlGrpAddrType,
        tmnxOamP2mpLspPingCtlGrpAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM P2MP LSP Ping tests
         on Nokia SROS series systems 10.0 release."
    ::= { tmnxOamPingGroups 48 }

tmnxOamPingObsoleteV11v0Group    OBJECT-GROUP
    OBJECTS     {
        tmnxOamMacPingCtlFibEntryName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ping operations made
         obsolete in SROS Release 11.0 R1."
    ::= { tmnxOamPingGroups 49 }

tmnxOamMacPingCtlV11v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamMacPingCtlTargetMacAddr,
        tmnxOamMacPingCtlSourceMacAddr,
        tmnxOamMacPingCtlSendControl,
        tmnxOamMacPingCtlReplyControl,
        tmnxOamMacPingCtlTtl,
        tmnxOamMacPingCtlRegister,
        tmnxOamMacPingCtlFlood,
        tmnxOamMacPingCtlForce,
        tmnxOamMacPingCtlAge,
        tmnxOamMacPingCtlSapPortId,
        tmnxOamMacPingCtlSapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting configuration of OAM Mac Ping tests on
         Nokia SROS series systems release 11.0."
    ::= { tmnxOamPingGroups 50 }

tmnxOamMacPingHistoryV11v0Group  OBJECT-GROUP
    OBJECTS     {
        tmnxOamMacPingHistoryResponse,
        tmnxOamMacPingHistoryOneWayTime,
        tmnxOamMacPingHistoryStatus,
        tmnxOamMacPingHistoryTime,
        tmnxOamMacPingHistoryReturnCode,
        tmnxOamMacPingHistoryAddressType,
        tmnxOamMacPingHistorySapId,
        tmnxOamMacPingHistorySdpId,
        tmnxOamMacPingHistoryAdminStatus,
        tmnxOamMacPingHistoryOperStatus,
        tmnxOamMacPingHistoryResponsePlane,
        tmnxOamMacPingHistorySize,
        tmnxOamMacPingHistoryInOneWayTime,
        tmnxOamMacPingHistorySrcAddrType,
        tmnxOamMacPingHistorySrcAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting reporting results of OAM Mac Ping
         tests on Nokia SROS series systems release 11.0."
    ::= { tmnxOamPingGroups 51 }

tmnxOamLspPingV11v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspPingCtlAssocChannel,
        tmnxOamLspPingCtlForce,
        tmnxOamLspPingCtlLdpPrefix,
        tmnxOamLspPingCtlLdpPrefixLen,
        tmnxOamLspPingCtlLdpPrefixType,
        tmnxOamLspPingCtlLspName,
        tmnxOamLspPingCtlMplsTpGlobalId,
        tmnxOamLspPingCtlMplsTpNodeId,
        tmnxOamLspPingCtlMplsTpPathType,
        tmnxOamLspPingCtlNhAddress,
        tmnxOamLspPingCtlNhAddressType,
        tmnxOamLspPingCtlNhIntfName,
        tmnxOamLspPingCtlPathDest,
        tmnxOamLspPingCtlPathDestType,
        tmnxOamLspPingCtlPathName,
        tmnxOamLspPingCtlTestSubMode,
        tmnxOamLspPingCtlTtl
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM LSP Ping tests on
         Nokia SROS systems, release 11.0."
    ::= { tmnxOamPingGroups 52 }

tmnxOamVccvPingV11v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvPingCtlAssocChannel,
        tmnxOamVccvPingCtlMplsTpGlobalId,
        tmnxOamVccvPingCtlMplsTpNodeId,
        tmnxOamVccvPingCtlTestSubMode
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM VCCV Ping
         tests on Nokia SROS series systems running release 11.0."
    ::= { tmnxOamPingGroups 53 }

tmnxOamPingV11v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingHistoryRtrnSubcode,
        tmnxOamPingHistorySdpBindId,
        tmnxOamPingHistorySrcGlobalId,
        tmnxOamPingHistorySrcNodeId
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Ping
         tests on Nokia SROS series systems running release 11.0."
    ::= { tmnxOamPingGroups 54 }

tmnxOamPingV12v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvPgTgFec128CtlDstAddr,
        tmnxOamVccvPgTgFec128CtlDstAddrT,
        tmnxOamVccvPgTgFec128CtlPwId,
        tmnxOamVccvPgTgFec128CtlPwType,
        tmnxOamVccvPgTgFec128CtlSrcAddr,
        tmnxOamVccvPgTgFec128CtlSrcAddrT,
        tmnxOamVccvPgTgStaticCtlAgi,
        tmnxOamVccvPgTgStaticCtlSaiiAcId,
        tmnxOamVccvPgTgStaticCtlSaiiGlbl,
        tmnxOamVccvPgTgStaticCtlSaiiNode,
        tmnxOamVccvPgTgStaticCtlTaiiAcId,
        tmnxOamVccvPgTgStaticCtlTaiiGlbl,
        tmnxOamVccvPgTgStaticCtlTaiiNode,
        tmnxOamVccvPingCtlSwitTgtFecType
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Ping
         tests on Nokia SROS series systems running release 12.0."
    ::= { tmnxOamPingGroups 55 }

tmnxOamPingV13v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamBfdOnLspBootStrRetryCount,
        tmnxOamBfdOnLspLspName,
        tmnxOamBfdOnLspPathState,
        tmnxOamBfdOnLspPingReturnCode,
        tmnxOamBfdOnLspPingReturnSubcode,
        tmnxOamBfdOnLspPingRxCount,
        tmnxOamBfdOnLspPingTxCount,
        tmnxOamBfdOnLspPingTxInterval,
        tmnxOamBfdOnLspRemoteAddress,
        tmnxOamBfdOnLspRemoteAddressType,
        tmnxOamBfdOnLspRemoteBfdDiscrim,
        tmnxOamPingHistoryNetworkIfName,
        tmnxOamPingResultsOutOfOrder,
        tmnxOamVxlanPingCtlEndSysMacAddr,
        tmnxOamVxlanPingCtlIFlag,
        tmnxOamVxlanPingCtlInIpDstAddr,
        tmnxOamVxlanPingCtlInIpDstAddrT,
        tmnxOamVxlanPingCtlInIpSrcAddr,
        tmnxOamVxlanPingCtlInIpSrcAddrT,
        tmnxOamVxlanPingCtlInL2DestMac,
        tmnxOamVxlanPingCtlNetworkId,
        tmnxOamVxlanPingCtlOutIpTtl,
        tmnxOamVxlanPingCtlOutSrcUdpPt,
        tmnxOamVxlanPingCtlReflectPad,
        tmnxOamVxlanPingCtlReplyMode,
        tmnxOamVxlanPingCtlTestId,
        tmnxOamVxlanPingHistNetworkId,
        tmnxOamVxlanPingHistOutIpTtl,
        tmnxOamVxlanPingHistReturnCode,
        tmnxOamVxlanPingHistRtrnSubCode,
        tmnxOamVxlanPingHistValidationRC
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Ping
         tests on Nokia SROS series systems running release 13.0."
    ::= { tmnxOamPingGroups 56 }

tmnxOamPingObsoleteV14v0Group    OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingCtlDescr,
        tmnxOamPingCtlStorageType
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM ping operations on
         Nokia SR series systems that were made obsolete in SROS release 14.0."
    ::= { tmnxOamPingGroups 57 }

tmnxOamPingV14v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamVxlanPingResOutSrcAddrTyp,
        tmnxOamVxlanPingResOutSrcAddress,
        tmnxOamP2mpLspPingCtlOptionalTLV
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Ping
         tests on Nokia SROS series systems running release 14.0."
    ::= { tmnxOamPingGroups 58 }

tmnxOamPingV15v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamBfdOnLspFecType,
        tmnxOamBfdOnLspOperState,
        tmnxOamBfdOnLspPrefix,
        tmnxOamBfdOnLspPrefixLen,
        tmnxOamBfdOnLspPrefixType,
        tmnxOamBfdOnLspSessBootstrInProg,
        tmnxOamBfdOnLspSessBootstrNoPV,
        tmnxOamBfdOnLspSessBootstrSendPV,
        tmnxOamBfdOnLspSourceAddress,
        tmnxOamBfdOnLspSourceAddressType,
        tmnxOamEthCfmPingCtlRemoteMepId,
        tmnxOamLspPingCtlIgpInstance,
        tmnxOamPingCtlSubscriberName
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Ping
         tests on Nokia SROS series systems running release 15.0."
    ::= { tmnxOamPingGroups 59 }

tmnxOamPingV16v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamPingCtlRouterInstanceName
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Ping
         tests on Nokia SROS series systems running release 16.0."
    ::= { tmnxOamPingGroups 60 }

tmnxOamPingObsoletedV16v0Group   OBJECT-GROUP
    OBJECTS     {
        tmnxOamMobGtpPingVRtrId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM gtp ping operations
         on Nokia SR series systems that were made obsolete in SROS release
         16.0."
    ::= { tmnxOamPingGroups 61 }

tmnxOamMobilePingV16v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamMobGtpPingRefPointType,
        tmnxOamMobGtpPingPort,
        tmnxOamMobGtpPingGateway
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM mobile gateway ping
         tests on Nokia 7x50 SR series systems."
    ::= { tmnxOamPingGroups 62 }

tmnxOamPingV19v0ObjGroups        OBJECT IDENTIFIER ::= { tmnxOamPingGroups 63 }

tmnxOamPingV19v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspPingCtlSrPlcyColor,
        tmnxOamLspPingCtlSrPlcyEndPtAddT,
        tmnxOamLspPingCtlSrPlcyEndPtAddr,
        tmnxOamLspPingCtlSrPlcySegList
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Ping
         tests on Nokia SROS series systems running release 19."
    ::= { tmnxOamPingV19v0ObjGroups 1 }

tmnxOamPingV20v0ObjGroups        OBJECT IDENTIFIER ::= { tmnxOamPingGroups 64 }

tmnxOamBierPingV20v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOamBierPingBfrPfxCtlAddrType,
        tmnxOamBierPingBfrPfxCtlAddress,
        tmnxOamBierPingBfrPfxCtlRowState,
        tmnxOamBierPingCtlBfrId,
        tmnxOamBierPingCtlBfrIdEnd,
        tmnxOamBierPingCtlBfrIdStart,
        tmnxOamBierPingCtlSubDomain,
        tmnxOamBierPingCtlTtl,
        tmnxOamBierPingHistoryBfrId,
        tmnxOamBierPingHistoryBfrPfx,
        tmnxOamBierPingHistoryBfrPfxType,
        tmnxOamBierPingHistoryReturnCode
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM BIER Ping
         tests on Nokia SROS series systems running release 20."
    ::= { tmnxOamPingV20v0ObjGroups 1 }

tmnxOamIfPingObjGroups           OBJECT IDENTIFIER ::= { tmnxOamPingConformance 3 }

tmnxOamIfPingV20v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamIfPingIfAdminState,
        tmnxOamIfPingIfCtlDot1p,
        tmnxOamIfPingIfCtlDscp,
        tmnxOamIfPingIfCtlFailThrld,
        tmnxOamIfPingIfCtlInterval,
        tmnxOamIfPingIfCtlReactInt,
        tmnxOamIfPingIfCtlReactFailThr,
        tmnxOamIfPingIfCtlReactThrld,
        tmnxOamIfPingIfCtlReactTimeout,
        tmnxOamIfPingIfCtlSize,
        tmnxOamIfPingIfCtlTimeout,
        tmnxOamIfPingIfCtlTtl,
        tmnxOamIfPingIfDestAddr,
        tmnxOamIfPingIfDestAddrType,
        tmnxOamIfPingIfFailThrldCnt,
        tmnxOamIfPingIfLastChanged,
        tmnxOamIfPingIfPassThrldCnt,
        tmnxOamIfPingIfRowStatus,
        tmnxOamIfPingIfTemplate,
        tmnxOamIfPingIfCurrentInterval,
        tmnxOamIfPingIfCurrentState,
        tmnxOamIfPingTmplCtlDescription,
        tmnxOamIfPingTmplCtlDot1p,
        tmnxOamIfPingTmplCtlDscp,
        tmnxOamIfPingTmplCtlFailThrld,
        tmnxOamIfPingTmplCtlInterval,
        tmnxOamIfPingTmplCtlLastMgmtChg,
        tmnxOamIfPingTmplCtlReactInt,
        tmnxOamIfPingTmplCtlReactFailThr,
        tmnxOamIfPingTmplCtlReactThrld,
        tmnxOamIfPingTmplCtlReactTimeout,
        tmnxOamIfPingTmplCtlRowStatus,
        tmnxOamIfPingTmplCtlSize,
        tmnxOamIfPingTmplCtlSync,
        tmnxOamIfPingTmplCtlTimeout,
        tmnxOamIfPingTmplCtlTtl,
        tmnxOamSysBgIcmpIfCtlSessCount,
        tmnxOamSysBgIcmpIfCtlSessLimit
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the operational status
         of an IP interface by means of ICMP in Nokia SROS series systems
         running release 20."
    ::= { tmnxOamIfPingObjGroups 1 }

tmnxOamLnkMeasObjsGroups         OBJECT IDENTIFIER ::= { tmnxOamPingConformance 4 }

tmnxOamLnkMeasV21v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamLnkMeasTmplCtlAdminState,
        tmnxOamLnkMeasTmplCtlASWIntgrity,
        tmnxOamLnkMeasTmplCtlASWMultplir,
        tmnxOamLnkMeasTmplCtlASWThrldAbs,
        tmnxOamLnkMeasTmplCtlASWThrldRel,
        tmnxOamLnkMeasTmplCtlDelayMeasTy,
        tmnxOamLnkMeasTmplCtlDescription,
        tmnxOamLnkMeasTmplCtlDscpEgrRmrk,
        tmnxOamLnkMeasTmplCtlDscpName,
        tmnxOamLnkMeasTmplCtlDstUdpPort,
        tmnxOamLnkMeasTmplCtlFC,
        tmnxOamLnkMeasTmplCtlInterval,
        tmnxOamLnkMeasTmplCtlIpv6UdpZero,
        tmnxOamLnkMeasTmplCtlLastMgmtChg,
        tmnxOamLnkMeasTmplCtlLastRepHold,
        tmnxOamLnkMeasTmplCtlProfile,
        tmnxOamLnkMeasTmplCtlRowStatus,
        tmnxOamLnkMeasTmplCtlSWIntegrity,
        tmnxOamLnkMeasTmplCtlSWMultplir,
        tmnxOamLnkMeasTmplCtlSWThrldAbs,
        tmnxOamLnkMeasTmplCtlSWThrldRel,
        tmnxOamLnkMeasTmplCtlTwlTimeLive,
        tmnxOamLnkMeasTmplCtlTwlTmStpFmt,
        tmnxOamLnkMeasTmplCtlUnidirMeasT,
        tmnxOamLnkMeasIfResDelayReported,
        tmnxOamLnkMeasIfResDetctbleTxErr,
        tmnxOamLnkMeasIfResDstIpAddr,
        tmnxOamLnkMeasIfResDstIpAddrTy,
        tmnxOamLnkMeasIfResDstIpAssigned,
        tmnxOamLnkMeasIfResFailureCond,
        tmnxOamLnkMeasIfResNewestASWIdx,
        tmnxOamLnkMeasIfResNewestSWIdx,
        tmnxOamLnkMeasIfResOperState,
        tmnxOamLnkMeasIfResReporting,
        tmnxOamLnkMeasIfResSrcIpAddr,
        tmnxOamLnkMeasIfResSrcIpAddrTy,
        tmnxOamLnkMeasIfResSrcIpAssigned,
        tmnxOamLnkMeasIfResTimestampUTC,
        tmnxOamLnkMeasIfResTriggeredBy,
        tmnxOamLnkMeasIfResASWEndUTC,
        tmnxOamLnkMeasIfResASWIntegrity,
        tmnxOamLnkMeasIfResASWReportAvg,
        tmnxOamLnkMeasIfResASWReportMax,
        tmnxOamLnkMeasIfResASWReportMin,
        tmnxOamLnkMeasIfResASWResult,
        tmnxOamLnkMeasIfResASWState,
        tmnxOamLnkMeasIfResASWWindCount,
        tmnxOamLnkMeasIfResSWAvg,
        tmnxOamLnkMeasIfResSWEndUTC,
        tmnxOamLnkMeasIfResSWErrors,
        tmnxOamLnkMeasIfResSWIntegrity,
        tmnxOamLnkMeasIfResSWMax,
        tmnxOamLnkMeasIfResSWMin,
        tmnxOamLnkMeasIfResSWReceived,
        tmnxOamLnkMeasIfResSWResult,
        tmnxOamLnkMeasIfResSWSent,
        tmnxOamLnkMeasIfResSWState
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting the OAM Link Measurement functionality
         on Nokia SROS Release 21.0."
    ::= { tmnxOamLnkMeasObjsGroups 1 }

tmnxOamTraceRouteConformance     OBJECT IDENTIFIER ::= { tmnxOamTestConformance 2 }

tmnxOamTrCompliances             OBJECT IDENTIFIER ::= { tmnxOamTraceRouteConformance 1 }

tmnxOamTr7450V4v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia 7450 ESS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV4v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV4v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamTrNotificationV4v0Group
        }
    ::= { tmnxOamTrCompliances 3 }

tmnxOamTr7750V4v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV4v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV4v0Group,
            tmnxOamVprnTrV4v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamTrNotificationV4v0Group
        }
    ::= { tmnxOamTrCompliances 4 }

tmnxOamTr7450V5v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia 7450 ESS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV5v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV5v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamTrNotificationV5v0Group
        }
    ::= { tmnxOamTrCompliances 5 }

tmnxOamTr7750V5v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV5v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV5v0Group,
            tmnxOamVprnTrV4v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamTrNotificationV5v0Group
        }
    ::= { tmnxOamTrCompliances 6 }

tmnxOamTr7450V6v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia 7450 ESS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV6v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV6v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamVccvTrV6v0Group,
            tmnxOamTrNotificationV5v0Group
        }
    ::= { tmnxOamTrCompliances 7 }

tmnxOamTr77x0V6v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia 7710/7750 SR series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV6v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV6v0Group,
            tmnxOamVprnTrV6v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamVccvTrV6v0Group,
            tmnxOamTrNotificationV5v0Group
        }
    ::= { tmnxOamTrCompliances 8 }

tmnxOamTr7450V7v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia 7450 ESS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV7v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV6v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamVccvTrV6v0Group,
            tmnxOamTrNotificationV5v0Group
        }
    ::= { tmnxOamTrCompliances 9 }

tmnxOamTr77x0V7v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia 7710/7750 SR series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV7v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV6v0Group,
            tmnxOamVprnTrV6v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamVccvTrV6v0Group,
            tmnxOamTrNotificationV5v0Group,
            tmnxOamP2mpLspTraceGroup
        }
    ::= { tmnxOamTrCompliances 10 }

tmnxOamTr7xx0V8v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia 7450/7710/7750 series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrGeneralV7v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamLspTrV6v0Group,
            tmnxOamVprnTrV6v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamVccvTrV6v0Group,
            tmnxOamTrNotificationV5v0Group,
            tmnxOamP2mpLspTraceGroup,
            tmnxOamEthCfmTrV8v0Group,
            tmnxOamTrGeneralV8v0Group,
            tmnxOamTrNotificationV8v0Group
        }
    ::= { tmnxOamTrCompliances 11 }

tmnxOamTr7xx0V9v0Compliance      MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia SROS series systems, release 9.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamEthCfmTrV8v0Group,
            tmnxOamLTtraceV9v0Group,
            tmnxOamLspTrV6v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamP2mpLspTraceGroup,
            tmnxOamTrGeneralV7v0Group,
            tmnxOamTrGeneralV8v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamTrNotificationV5v0Group,
            tmnxOamTrNotificationV8v0Group,
            tmnxOamVccvTrV6v0Group,
            tmnxOamVccvTrV9v0Group,
            tmnxOamVprnTrV6v0Group
        }
    ::= { tmnxOamTrCompliances 12 }

tmnxOamTr7xx0V11v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM Trace Route tests on
         Nokia SROS series systems, release 11.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamEthCfmTrV8v0Group,
            tmnxOamLTtraceV9v0Group,
            tmnxOamLspTrV6v0Group,
            tmnxOamMacTrV3v0Group,
            tmnxOamMcastTrV4v0Group,
            tmnxOamP2mpLspTraceGroup,
            tmnxOamTrGeneralV7v0Group,
            tmnxOamTrGeneralV8v0Group,
            tmnxOamTrGeneralV11v0Group,
            tmnxOamTrHopsV4v0Group,
            tmnxOamTrNotificationV5v0Group,
            tmnxOamTrNotificationV8v0Group,
            tmnxOamTrV11v0Group,
            tmnxOamVccvTrV6v0Group,
            tmnxOamVccvTrV9v0Group,
            tmnxOamVccvTrV11v0Group,
            tmnxOamVprnTrV6v0Group
        }
    ::= { tmnxOamTrCompliances 13 }

tmnxOamTr7xx0V12v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The incremental module compliance statement for management of OAM Trace
         Route tests on Nokia SROS series systems, release 12.0.  The
         corresponding base module compliance statement is
         tmnxOamTr7xx0V11v0Compliance."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrV12v0Group
        }
    ::= { tmnxOamTrCompliances 14 }

tmnxOamTr7xx0V13v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The incremental module compliance statement for management of OAM
         Trace Route tests on Nokia SROS series systems, release 13.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrV13v0Group
        }
    ::= { tmnxOamTrCompliances 15 }

tmnxOamTr7xx0V15v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The incremental module compliance statement for management of OAM
         Trace Route tests on Nokia SROS series systems, release 15.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrV15v0Group
        }
    ::= { tmnxOamTrCompliances 17 }

tmnxOamTr7xx0V19v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM trace OBJECT-GROUPs added in Nokia
         SROS series systems, release 19.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamTrV19v0Group
        }
    ::= { tmnxOamTrCompliances 18 }

tmnxOamTr7xx0V20v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM trace OBJECT-GROUPs added in Nokia
         SROS series systems, release 20."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamBierTrV20v0Group
        }
    ::= { tmnxOamTrCompliances 19 }

tmnxOamTr7xx0V21v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for OAM trace OBJECT-GROUPs added in Nokia
         SROS series systems, release 21."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamIcmpTrV21v0Group
        }
    ::= { tmnxOamTrCompliances 20 }

tmnxOamTrGroups                  OBJECT IDENTIFIER ::= { tmnxOamTraceRouteConformance 2 }

tmnxOamMacTrV3v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamMacTrCtlTargetMacAddr,
        tmnxOamMacTrCtlSourceMacAddr,
        tmnxOamMacTrCtlSendControl,
        tmnxOamMacTrCtlReplyControl,
        tmnxOamMacTrL2MapRouterID,
        tmnxOamMacTrL2MapLabel,
        tmnxOamMacTrL2MapProtocol,
        tmnxOamMacTrL2MapVCType,
        tmnxOamMacTrL2MapVCID,
        tmnxOamMacTrL2MapDirection,
        tmnxOamMacTrL2MapSdpId,
        tmnxOamMacTrL2MapSapName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM MAC Trace Route
         tests on Nokia SROS series systems."
    ::= { tmnxOamTrGroups 10 }

tmnxOamTrObsoleteV3v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrResultsTestAttempts,
        tmnxOamTrResultsTestSuccesses
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Trace Route tests
         that became obsolete in the 3.0 release."
    ::= { tmnxOamTrGroups 11 }

tmnxOamTrGeneralV4v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrMaxConcurrentRequests,
        tmnxOamTrCtlRowStatus,
        tmnxOamTrCtlStorageType,
        tmnxOamTrCtlDescr,
        tmnxOamTrCtlTestMode,
        tmnxOamTrCtlAdminStatus,
        tmnxOamTrCtlFcName,
        tmnxOamTrCtlProfile,
        tmnxOamTrCtlServiceId,
        tmnxOamTrCtlDataSize,
        tmnxOamTrCtlTimeOut,
        tmnxOamTrCtlProbesPerHop,
        tmnxOamTrCtlMaxTtl,
        tmnxOamTrCtlInitialTtl,
        tmnxOamTrCtlDSField,
        tmnxOamTrCtlMaxFailures,
        tmnxOamTrCtlInterval,
        tmnxOamTrCtlMaxRows,
        tmnxOamTrCtlTrapGeneration,
        tmnxOamTrCtlCreateHopsEntries,
        tmnxOamTrCtlSAA,
        tmnxOamTrCtlRuns,
        tmnxOamTrCtlFailures,
        tmnxOamTrCtlLastRunResult,
        tmnxOamTrCtlLastChanged,
        tmnxOamTrCtlVRtrID,
        tmnxOamTrCtlTgtAddrType,
        tmnxOamTrCtlTgtAddress,
        tmnxOamTrCtlSrcAddrType,
        tmnxOamTrCtlSrcAddress,
        tmnxOamTrCtlWaitMilliSec,
        tmnxOamTrResultsOperStatus,
        tmnxOamTrResultsCurHopCount,
        tmnxOamTrResultsCurProbeCount,
        tmnxOamTrResultsLastGoodPath,
        tmnxOamTrResultsTgtAddrType,
        tmnxOamTrResultsTgtAddress,
        tmnxOamTrProbeHistoryResponse,
        tmnxOamTrProbeHistoryOneWayTime,
        tmnxOamTrProbeHistoryStatus,
        tmnxOamTrProbeHistoryLastRC,
        tmnxOamTrProbeHistoryTime,
        tmnxOamTrProbeHistoryResponsePlane,
        tmnxOamTrProbeHistoryAddressType,
        tmnxOamTrProbeHistorySapId,
        tmnxOamTrProbeHistoryVersion,
        tmnxOamTrProbeHistoryRouterID,
        tmnxOamTrProbeHistoryIfIndex,
        tmnxOamTrProbeHistoryDataLen,
        tmnxOamTrProbeHistorySize,
        tmnxOamTrProbeHistoryInOneWayTime,
        tmnxOamTrProbeHistoryAddrType,
        tmnxOamTrProbeHistoryAddress
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM Trace Route test
         general capabilities on Nokia SROS series systems 4.0R1 release."
    ::= { tmnxOamTrGroups 12 }

tmnxOamTrHopsV4v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrHopsMinRtt,
        tmnxOamTrHopsMaxRtt,
        tmnxOamTrHopsAverageRtt,
        tmnxOamTrHopsRttSumOfSquares,
        tmnxOamTrHopsMinTt,
        tmnxOamTrHopsMaxTt,
        tmnxOamTrHopsAverageTt,
        tmnxOamTrHopsTtSumOfSquares,
        tmnxOamTrHopsSentProbes,
        tmnxOamTrHopsProbeResponses,
        tmnxOamTrHopsLastGoodProbe,
        tmnxOamTrHopsMinInTt,
        tmnxOamTrHopsMaxInTt,
        tmnxOamTrHopsAverageInTt,
        tmnxOamTrHopsInTtSumOfSqrs,
        tmnxOamTrHopsOutJitter,
        tmnxOamTrHopsInJitter,
        tmnxOamTrHopsRtJitter,
        tmnxOamTrHopsProbeTimeouts,
        tmnxOamTrHopsProbeFailures,
        tmnxOamTrHopsTgtAddrType,
        tmnxOamTrHopsTgtAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of optional objects to report OAM Trace Route Hops returned
         in response to OAM Trace Route tests on Nokia 7x50 SR series systems
         4.0R1."
    ::= { tmnxOamTrGroups 13 }

tmnxOamLspTrV4v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspTrCtlVRtrID,
        tmnxOamLspTrCtlLspName,
        tmnxOamLspTrCtlPathName,
        tmnxOamLspTrCtlLdpPrefixType,
        tmnxOamLspTrCtlLdpPrefix,
        tmnxOamLspTrCtlLdpPrefixLen,
        tmnxOamLspTrMapAddrType,
        tmnxOamLspTrMapDSIPv4Addr,
        tmnxOamLspTrMapDSIfAddr,
        tmnxOamLspTrMapMTU,
        tmnxOamLspTrMapDSIndex,
        tmnxOamLspTrDSLabelLabel,
        tmnxOamLspTrDSLabelProtocol
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM LSP Trace Route
         tests on Nokia SROS series systems 4.0 release."
    ::= { tmnxOamTrGroups 14 }

tmnxOamVprnTrV4v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOamVprnTrCtlReplyControl,
        tmnxOamVprnTrCtlSrcAddrType,
        tmnxOamVprnTrCtlSrcAddress,
        tmnxOamVprnTrL3MapRouterID,
        tmnxOamVprnTrL3MapRteVprnLabel,
        tmnxOamVprnTrL3MapRteMetrics,
        tmnxOamVprnTrL3MapRteLastUp,
        tmnxOamVprnTrL3MapRteOwner,
        tmnxOamVprnTrL3MapRtePref,
        tmnxOamVprnTrL3MapRteDist,
        tmnxOamVprnTrL3MapNumNextHops,
        tmnxOamVprnTrL3MapNumRteTargets,
        tmnxOamVprnTrL3MapDestAddrType,
        tmnxOamVprnTrL3MapDestAddress,
        tmnxOamVprnTrL3MapDestMaskLen,
        tmnxOamVprnTrNextHopRtrID,
        tmnxOamVprnTrNextHopType,
        tmnxOamVprnTrNextHopTunnelID,
        tmnxOamVprnTrNextHopTunnelType,
        tmnxOamVprnTrNextHopIfIndex,
        tmnxOamVprnTrRouteTarget
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM VPRN Trace Route
         tests on Nokia SROS series systems release 4.0."
    ::= { tmnxOamTrGroups 15 }

tmnxOamMcastTrV4v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamMcastTrCtlVRtrID,
        tmnxOamMcastTrCtlHops,
        tmnxOamMcastTrQueryId,
        tmnxOamMcastTrCtlSrcAddrType,
        tmnxOamMcastTrCtlSrcAddress,
        tmnxOamMcastTrCtlDestAddrType,
        tmnxOamMcastTrCtlDestAddress,
        tmnxOamMcastTrCtlRespAddrType,
        tmnxOamMcastTrCtlRespAddress,
        tmnxOamMcastTrCtlGrpAddrType,
        tmnxOamMcastTrCtlGrpAddress,
        tmnxOamMcastTrRespQueryArrivalTime,
        tmnxOamMcastTrRespInPktCount,
        tmnxOamMcastTrRespOutPktCount,
        tmnxOamMcastTrRespSGPktCount,
        tmnxOamMcastTrRespRtgProtocol,
        tmnxOamMcastTrRespFwdTtl,
        tmnxOamMcastTrRespMBZBit,
        tmnxOamMcastTrRespSrcBit,
        tmnxOamMcastTrRespSrcMask,
        tmnxOamMcastTrRespFwdCode,
        tmnxOamMcastTrRespInIfAddrType,
        tmnxOamMcastTrRespInIfAddress,
        tmnxOamMcastTrRespOutIfAddrType,
        tmnxOamMcastTrRespOutIfAddress,
        tmnxOamMcastTrRespPhRtrAddrType,
        tmnxOamMcastTrRespPhRtrAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Multicast Trace
         Route tests on Nokia SROS series systems release 4.0."
    ::= { tmnxOamTrGroups 16 }

tmnxOamTrObsoleteV4v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrCtlTargetIpAddress,
        tmnxOamTrResultsIpTgtAddr,
        tmnxOamTrProbeHistoryIpAddr,
        tmnxOamTrHopsIpTgtAddress,
        tmnxOamLspTrCtlLdpIpPrefix,
        tmnxOamLspTrCtlLdpIpPrefixLen,
        tmnxOamVprnTrCtlSourceIpAddr,
        tmnxOamVprnTrL3MapRteDestAddr,
        tmnxOamVprnTrL3MapRteDestMask,
        tmnxOamMcastTrCtlSrcIpAddr,
        tmnxOamMcastTrCtlDestIpAddr,
        tmnxOamMcastTrCtlRespIpAddr,
        tmnxOamMcastTrCtlGrpIpAddr,
        tmnxOamMcastTrRespPrevHopRtrAddr,
        tmnxOamMcastTrRespInIfAddr,
        tmnxOamMcastTrRespOutIfAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM trace route tests on
         Nokia SROS series systems that were made obsolete in release 4.0."
    ::= { tmnxOamTrGroups 17 }

tmnxOamTrNotificationV4v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamTrPathChange,
        tmnxOamTrTestFailed,
        tmnxOamTrTestCompleted
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting the OAM Trace Route test feature
         on Nokia SROS series systems release 4.0."
    ::= { tmnxOamTrGroups 18 }

tmnxOamLspTrV5v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspTrCtlVRtrID,
        tmnxOamLspTrCtlLspName,
        tmnxOamLspTrCtlPathName,
        tmnxOamLspTrCtlLdpPrefixType,
        tmnxOamLspTrCtlLdpPrefix,
        tmnxOamLspTrCtlLdpPrefixLen,
        tmnxOamLspTrCtlPathDestType,
        tmnxOamLspTrCtlPathDest,
        tmnxOamLspTrCtlNhIntfName,
        tmnxOamLspTrCtlNhAddressType,
        tmnxOamLspTrCtlNhAddress,
        tmnxOamLspTrMapAddrType,
        tmnxOamLspTrMapDSIPv4Addr,
        tmnxOamLspTrMapDSIfAddr,
        tmnxOamLspTrMapMTU,
        tmnxOamLspTrDSLabelLabel,
        tmnxOamLspTrDSLabelProtocol
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM LSP Trace Route
         tests on Nokia SROS series systems 5.0 release."
    ::= { tmnxOamTrGroups 19 }

tmnxOamTrObsoleteV5v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspTrMapDSIndex
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Trace tests on Nokia
         SROS series systems that were made obsolete in release 5.0."
    ::= { tmnxOamTrGroups 20 }

tmnxOamTrGeneralV5v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrMaxConcurrentRequests,
        tmnxOamTrCtlRowStatus,
        tmnxOamTrCtlStorageType,
        tmnxOamTrCtlDescr,
        tmnxOamTrCtlTestMode,
        tmnxOamTrCtlAdminStatus,
        tmnxOamTrCtlFcName,
        tmnxOamTrCtlProfile,
        tmnxOamTrCtlServiceId,
        tmnxOamTrCtlDataSize,
        tmnxOamTrCtlTimeOut,
        tmnxOamTrCtlProbesPerHop,
        tmnxOamTrCtlMaxTtl,
        tmnxOamTrCtlInitialTtl,
        tmnxOamTrCtlDSField,
        tmnxOamTrCtlMaxFailures,
        tmnxOamTrCtlInterval,
        tmnxOamTrCtlMaxRows,
        tmnxOamTrCtlTrapGeneration,
        tmnxOamTrCtlCreateHopsEntries,
        tmnxOamTrCtlSAA,
        tmnxOamTrCtlRuns,
        tmnxOamTrCtlFailures,
        tmnxOamTrCtlLastRunResult,
        tmnxOamTrCtlLastChanged,
        tmnxOamTrCtlVRtrID,
        tmnxOamTrCtlTgtAddrType,
        tmnxOamTrCtlTgtAddress,
        tmnxOamTrCtlSrcAddrType,
        tmnxOamTrCtlSrcAddress,
        tmnxOamTrCtlWaitMilliSec,
        tmnxOamTrResultsOperStatus,
        tmnxOamTrResultsCurHopCount,
        tmnxOamTrResultsCurProbeCount,
        tmnxOamTrResultsLastGoodPath,
        tmnxOamTrResultsTgtAddrType,
        tmnxOamTrResultsTgtAddress,
        tmnxOamTrProbeHistoryResponse,
        tmnxOamTrProbeHistoryOneWayTime,
        tmnxOamTrProbeHistoryStatus,
        tmnxOamTrProbeHistoryLastRC,
        tmnxOamTrProbeHistoryTime,
        tmnxOamTrProbeHistoryResponsePlane,
        tmnxOamTrProbeHistoryAddressType,
        tmnxOamTrProbeHistorySapId,
        tmnxOamTrProbeHistoryVersion,
        tmnxOamTrProbeHistoryRouterID,
        tmnxOamTrProbeHistoryIfIndex,
        tmnxOamTrProbeHistoryDataLen,
        tmnxOamTrProbeHistorySize,
        tmnxOamTrProbeHistoryInOneWayTime,
        tmnxOamTrProbeHistoryAddrType,
        tmnxOamTrProbeHistoryAddress,
        tmnxOamLTtraceFecDiscoveryState,
        tmnxOamLTtraceFecDisStatusBits,
        tmnxOamLTtraceFecDisPaths,
        tmnxOamLTtraceFecFailedHops,
        tmnxOamLTtraceFecLastDisEnd,
        tmnxOamLTtraceFecFailedProbes,
        tmnxOamLTtraceFecProbeState,
        tmnxOamLTtracePathRemAddrType,
        tmnxOamLTtracePathRemoteAddr,
        tmnxOamLTtracePathEgrNhAddrType,
        tmnxOamLTtracePathEgrNhAddr,
        tmnxOamLTtracePathDisTtl,
        tmnxOamLTtracePathLastDisTime,
        tmnxOamLTtracePathLastRc,
        tmnxOamLTtracePathProbeState,
        tmnxOamLTtraceCtlLdpPrefixType,
        tmnxOamLTtraceCtlLdpPrefix,
        tmnxOamLTtraceCtlLdpPrefixLen,
        tmnxOamLTtraceCtlMaxPath,
        tmnxOamLTtraceResultsDisPaths,
        tmnxOamLTtraceResultsFailedHops,
        tmnxOamLTtraceResultsDisState,
        tmnxOamLTtraceResultsDisStatus,
        tmnxOamLTtraceUpStreamHopIndex,
        tmnxOamLTtraceHopAddrType,
        tmnxOamLTtraceHopAddr,
        tmnxOamLTtraceHopDstAddrType,
        tmnxOamLTtraceHopDstAddr,
        tmnxOamLTtraceHopEgrNhAddrType,
        tmnxOamLTtraceHopEgrNhAddr,
        tmnxOamLTtraceHopDisTtl,
        tmnxOamLTtraceHopLastRc,
        tmnxOamLTtraceHopDiscoveryState,
        tmnxOamLTtraceHopDiscoveryTime,
        tmnxOamLTtraceAutoRowStatus,
        tmnxOamLTtraceAutoLastChanged,
        tmnxOamLTtraceAutoStorageType,
        tmnxOamLTtraceAutoAdminState,
        tmnxOamLTtraceAutoFcName,
        tmnxOamLTtraceAutoProfile,
        tmnxOamLTtraceAutoDiscIntvl,
        tmnxOamLTtraceAutoMaxPath,
        tmnxOamLTtraceAutoTrMaxTtl,
        tmnxOamLTtraceAutoTrTimeOut,
        tmnxOamLTtraceAutoTrMaxFailures,
        tmnxOamLTtraceAutoPolicy1,
        tmnxOamLTtraceAutoPolicy2,
        tmnxOamLTtraceAutoPolicy3,
        tmnxOamLTtraceAutoPolicy4,
        tmnxOamLTtraceAutoPolicy5,
        tmnxOamLTtraceAutoProbeIntvl,
        tmnxOamLTtraceAutoPrTimeOut,
        tmnxOamLTtraceAutoPrMaxFailures,
        tmnxOamLTtraceAutoDiscoveryState,
        tmnxOamLTtraceAutoTotalFecs,
        tmnxOamLTtraceAutoDisFecs,
        tmnxOamLTtraceAutoLastDisStart,
        tmnxOamLTtraceAutoLastDisEnd,
        tmnxOamLTtraceAutoLastDisDur,
        tmnxOamLTtracePathProbeState,
        tmnxOamLTtracePathProbeTmOutCnt,
        tmnxOamLTtraceMaxConRequests
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM Trace Route test
         general capabilities on Nokia SROS series systems 5.0 release."
    ::= { tmnxOamTrGroups 21 }

tmnxOamTrNotificationV5v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamTrPathChange,
        tmnxOamTrTestFailed,
        tmnxOamTrTestCompleted,
        tmnxOamLdpTtraceAutoDiscState,
        tmnxOamLdpTtraceFecProbeState,
        tmnxOamLdpTtraceFecDisStatus
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the OAM Trace Route test feature
         on Nokia SROS series systems release 5.0."
    ::= { tmnxOamTrGroups 22 }

tmnxOamVccvTrV6v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvTrCtlSdpIdVcId,
        tmnxOamVccvTrCtlReplyMode,
        tmnxOamVccvTrNextPwID,
        tmnxOamVccvTrNextPwType,
        tmnxOamVccvTrNextSenderAddrType,
        tmnxOamVccvTrNextSenderAddr,
        tmnxOamVccvTrNextRemoteAddrType,
        tmnxOamVccvTrNextRemoteAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM VCCV Trace Route
         test general capabilities on Nokia SROS series systems 6.0 release."
    ::= { tmnxOamTrGroups 23 }

tmnxOamVprnTrObsoleteV6v0Group   OBJECT-GROUP
    OBJECTS     {
        tmnxOamVprnTrNextHopRtrID
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM VPRN Trace Route
         tests on Nokia SROS series systems that were made obsolete in release
         6.0."
    ::= { tmnxOamTrGroups 24 }

tmnxOamVprnTrV6v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOamVprnTrCtlReplyControl,
        tmnxOamVprnTrCtlSrcAddrType,
        tmnxOamVprnTrCtlSrcAddress,
        tmnxOamVprnTrL3MapRouterID,
        tmnxOamVprnTrL3MapRteVprnLabel,
        tmnxOamVprnTrL3MapRteMetrics,
        tmnxOamVprnTrL3MapRteLastUp,
        tmnxOamVprnTrL3MapRteOwner,
        tmnxOamVprnTrL3MapRtePref,
        tmnxOamVprnTrL3MapRteDist,
        tmnxOamVprnTrL3MapNumNextHops,
        tmnxOamVprnTrL3MapNumRteTargets,
        tmnxOamVprnTrL3MapDestAddrType,
        tmnxOamVprnTrL3MapDestAddress,
        tmnxOamVprnTrL3MapDestMaskLen,
        tmnxOamVprnTrNextHopType,
        tmnxOamVprnTrNextHopTunnelID,
        tmnxOamVprnTrNextHopTunnelType,
        tmnxOamVprnTrNextHopIfIndex,
        tmnxOamVprnTrNextHopAddrType,
        tmnxOamVprnTrNextHopAddress,
        tmnxOamVprnTrRouteTarget
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM VPRN Trace Route
         tests on Nokia SROS series systems release 6.0."
    ::= { tmnxOamTrGroups 25 }

tmnxOamP2mpLspTraceGroup         OBJECT-GROUP
    OBJECTS     {
        tmnxOamP2mpLspTrCtlInstName,
        tmnxOamP2mpLspTrCtlLeafIpAddr,
        tmnxOamP2mpLspTrCtlLeafIpAddrType,
        tmnxOamP2mpLspTrCtlLspName,
        tmnxOamP2mpLspTrMapAddrType,
        tmnxOamP2mpLspTrMapDSIPv4Addr,
        tmnxOamP2mpLspTrMapDSIfAddr,
        tmnxOamP2mpLspTrMapMTU,
        tmnxOamP2mpLspTrMapP2mpBranch,
        tmnxOamP2mpLspTrMapP2mpBud,
        tmnxOamP2mpLspTrDSLabelLabel,
        tmnxOamP2mpLspTrDSLabelProtocol
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM P2MP LSP Trace Route
         tests on Nokia SROS series systems release 7.0."
    ::= { tmnxOamTrGroups 26 }

tmnxOamTrGeneralV6v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrMaxConcurrentRequests,
        tmnxOamTrCtlRowStatus,
        tmnxOamTrCtlStorageType,
        tmnxOamTrCtlDescr,
        tmnxOamTrCtlTestMode,
        tmnxOamTrCtlAdminStatus,
        tmnxOamTrCtlFcName,
        tmnxOamTrCtlProfile,
        tmnxOamTrCtlServiceId,
        tmnxOamTrCtlDataSize,
        tmnxOamTrCtlTimeOut,
        tmnxOamTrCtlProbesPerHop,
        tmnxOamTrCtlMaxTtl,
        tmnxOamTrCtlInitialTtl,
        tmnxOamTrCtlDSField,
        tmnxOamTrCtlMaxFailures,
        tmnxOamTrCtlInterval,
        tmnxOamTrCtlTrapGeneration,
        tmnxOamTrCtlSAA,
        tmnxOamTrCtlRuns,
        tmnxOamTrCtlFailures,
        tmnxOamTrCtlLastRunResult,
        tmnxOamTrCtlLastChanged,
        tmnxOamTrCtlVRtrID,
        tmnxOamTrCtlTgtAddrType,
        tmnxOamTrCtlTgtAddress,
        tmnxOamTrCtlSrcAddrType,
        tmnxOamTrCtlSrcAddress,
        tmnxOamTrCtlWaitMilliSec,
        tmnxOamTrResultsOperStatus,
        tmnxOamTrResultsCurHopCount,
        tmnxOamTrResultsCurProbeCount,
        tmnxOamTrResultsLastGoodPath,
        tmnxOamTrResultsTgtAddrType,
        tmnxOamTrResultsTgtAddress,
        tmnxOamTrProbeHistoryResponse,
        tmnxOamTrProbeHistoryOneWayTime,
        tmnxOamTrProbeHistoryStatus,
        tmnxOamTrProbeHistoryLastRC,
        tmnxOamTrProbeHistoryTime,
        tmnxOamTrProbeHistoryResponsePlane,
        tmnxOamTrProbeHistoryAddressType,
        tmnxOamTrProbeHistorySapId,
        tmnxOamTrProbeHistoryVersion,
        tmnxOamTrProbeHistoryRouterID,
        tmnxOamTrProbeHistoryIfIndex,
        tmnxOamTrProbeHistoryDataLen,
        tmnxOamTrProbeHistorySize,
        tmnxOamTrProbeHistoryInOneWayTime,
        tmnxOamTrProbeHistoryAddrType,
        tmnxOamTrProbeHistoryAddress,
        tmnxOamLTtraceFecDiscoveryState,
        tmnxOamLTtraceFecDisStatusBits,
        tmnxOamLTtraceFecDisPaths,
        tmnxOamLTtraceFecFailedHops,
        tmnxOamLTtraceFecLastDisEnd,
        tmnxOamLTtraceFecFailedProbes,
        tmnxOamLTtraceFecProbeState,
        tmnxOamLTtracePathRemAddrType,
        tmnxOamLTtracePathRemoteAddr,
        tmnxOamLTtracePathEgrNhAddrType,
        tmnxOamLTtracePathEgrNhAddr,
        tmnxOamLTtracePathDisTtl,
        tmnxOamLTtracePathLastDisTime,
        tmnxOamLTtracePathLastRc,
        tmnxOamLTtracePathProbeState,
        tmnxOamLTtraceCtlLdpPrefixType,
        tmnxOamLTtraceCtlLdpPrefix,
        tmnxOamLTtraceCtlLdpPrefixLen,
        tmnxOamLTtraceCtlMaxPath,
        tmnxOamLTtraceResultsDisPaths,
        tmnxOamLTtraceResultsFailedHops,
        tmnxOamLTtraceResultsDisState,
        tmnxOamLTtraceResultsDisStatus,
        tmnxOamLTtraceUpStreamHopIndex,
        tmnxOamLTtraceHopAddrType,
        tmnxOamLTtraceHopAddr,
        tmnxOamLTtraceHopDstAddrType,
        tmnxOamLTtraceHopDstAddr,
        tmnxOamLTtraceHopEgrNhAddrType,
        tmnxOamLTtraceHopEgrNhAddr,
        tmnxOamLTtraceHopDisTtl,
        tmnxOamLTtraceHopLastRc,
        tmnxOamLTtraceHopDiscoveryState,
        tmnxOamLTtraceHopDiscoveryTime,
        tmnxOamLTtraceAutoRowStatus,
        tmnxOamLTtraceAutoLastChanged,
        tmnxOamLTtraceAutoStorageType,
        tmnxOamLTtraceAutoAdminState,
        tmnxOamLTtraceAutoFcName,
        tmnxOamLTtraceAutoProfile,
        tmnxOamLTtraceAutoDiscIntvl,
        tmnxOamLTtraceAutoMaxPath,
        tmnxOamLTtraceAutoTrMaxTtl,
        tmnxOamLTtraceAutoTrTimeOut,
        tmnxOamLTtraceAutoTrMaxFailures,
        tmnxOamLTtraceAutoPolicy1,
        tmnxOamLTtraceAutoPolicy2,
        tmnxOamLTtraceAutoPolicy3,
        tmnxOamLTtraceAutoPolicy4,
        tmnxOamLTtraceAutoPolicy5,
        tmnxOamLTtraceAutoProbeIntvl,
        tmnxOamLTtraceAutoPrTimeOut,
        tmnxOamLTtraceAutoPrMaxFailures,
        tmnxOamLTtraceAutoDiscoveryState,
        tmnxOamLTtraceAutoTotalFecs,
        tmnxOamLTtraceAutoDisFecs,
        tmnxOamLTtraceAutoLastDisStart,
        tmnxOamLTtraceAutoLastDisEnd,
        tmnxOamLTtraceAutoLastDisDur,
        tmnxOamLTtracePathProbeState,
        tmnxOamLTtracePathProbeTmOutCnt,
        tmnxOamLTtraceMaxConRequests
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM Trace Route test
         general capabilities on Nokia SROS series systems 6.0 release."
    ::= { tmnxOamTrGroups 27 }

tmnxOamTrObsoleteV6v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrCtlCreateHopsEntries,
        tmnxOamLspTrCtlVRtrID,
        tmnxOamTrCtlMaxRows
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM trace route
         operations on Nokia SR series systems that were made obsolete in
         release 6.0.

         Please see tmnxOamVprnTrObsoleteV6v0Group for additional obsoleted
         objects."
    ::= { tmnxOamTrGroups 28 }

tmnxOamTrGeneralV7v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrMaxConcurrentRequests,
        tmnxOamTrCtlRowStatus,
        tmnxOamTrCtlTestMode,
        tmnxOamTrCtlAdminStatus,
        tmnxOamTrCtlFcName,
        tmnxOamTrCtlProfile,
        tmnxOamTrCtlServiceId,
        tmnxOamTrCtlDataSize,
        tmnxOamTrCtlTimeOut,
        tmnxOamTrCtlProbesPerHop,
        tmnxOamTrCtlMaxTtl,
        tmnxOamTrCtlInitialTtl,
        tmnxOamTrCtlDSField,
        tmnxOamTrCtlMaxFailures,
        tmnxOamTrCtlInterval,
        tmnxOamTrCtlTrapGeneration,
        tmnxOamTrCtlSAA,
        tmnxOamTrCtlRuns,
        tmnxOamTrCtlFailures,
        tmnxOamTrCtlLastRunResult,
        tmnxOamTrCtlLastChanged,
        tmnxOamTrCtlVRtrID,
        tmnxOamTrCtlTgtAddrType,
        tmnxOamTrCtlTgtAddress,
        tmnxOamTrCtlSrcAddrType,
        tmnxOamTrCtlSrcAddress,
        tmnxOamTrCtlWaitMilliSec,
        tmnxOamTrResultsOperStatus,
        tmnxOamTrResultsCurHopCount,
        tmnxOamTrResultsCurProbeCount,
        tmnxOamTrResultsLastGoodPath,
        tmnxOamTrResultsTgtAddrType,
        tmnxOamTrResultsTgtAddress,
        tmnxOamTrProbeHistoryResponse,
        tmnxOamTrProbeHistoryOneWayTime,
        tmnxOamTrProbeHistoryStatus,
        tmnxOamTrProbeHistoryLastRC,
        tmnxOamTrProbeHistoryTime,
        tmnxOamTrProbeHistoryResponsePlane,
        tmnxOamTrProbeHistoryAddressType,
        tmnxOamTrProbeHistorySapId,
        tmnxOamTrProbeHistoryVersion,
        tmnxOamTrProbeHistoryRouterID,
        tmnxOamTrProbeHistoryIfIndex,
        tmnxOamTrProbeHistoryDataLen,
        tmnxOamTrProbeHistorySize,
        tmnxOamTrProbeHistoryInOneWayTime,
        tmnxOamTrProbeHistoryAddrType,
        tmnxOamTrProbeHistoryAddress,
        tmnxOamLTtraceFecDiscoveryState,
        tmnxOamLTtraceFecDisStatusBits,
        tmnxOamLTtraceFecDisPaths,
        tmnxOamLTtraceFecFailedHops,
        tmnxOamLTtraceFecLastDisEnd,
        tmnxOamLTtraceFecFailedProbes,
        tmnxOamLTtraceFecProbeState,
        tmnxOamLTtracePathRemAddrType,
        tmnxOamLTtracePathRemoteAddr,
        tmnxOamLTtracePathEgrNhAddrType,
        tmnxOamLTtracePathEgrNhAddr,
        tmnxOamLTtracePathDisTtl,
        tmnxOamLTtracePathLastDisTime,
        tmnxOamLTtracePathLastRc,
        tmnxOamLTtracePathProbeState,
        tmnxOamLTtraceCtlLdpPrefixType,
        tmnxOamLTtraceCtlLdpPrefix,
        tmnxOamLTtraceCtlLdpPrefixLen,
        tmnxOamLTtraceCtlMaxPath,
        tmnxOamLTtraceResultsDisPaths,
        tmnxOamLTtraceResultsFailedHops,
        tmnxOamLTtraceResultsDisState,
        tmnxOamLTtraceResultsDisStatus,
        tmnxOamLTtraceUpStreamHopIndex,
        tmnxOamLTtraceHopAddrType,
        tmnxOamLTtraceHopAddr,
        tmnxOamLTtraceHopDstAddrType,
        tmnxOamLTtraceHopDstAddr,
        tmnxOamLTtraceHopEgrNhAddrType,
        tmnxOamLTtraceHopEgrNhAddr,
        tmnxOamLTtraceHopDisTtl,
        tmnxOamLTtraceHopLastRc,
        tmnxOamLTtraceHopDiscoveryState,
        tmnxOamLTtraceHopDiscoveryTime,
        tmnxOamLTtraceAutoRowStatus,
        tmnxOamLTtraceAutoLastChanged,
        tmnxOamLTtraceAutoAdminState,
        tmnxOamLTtraceAutoFcName,
        tmnxOamLTtraceAutoProfile,
        tmnxOamLTtraceAutoDiscIntvl,
        tmnxOamLTtraceAutoMaxPath,
        tmnxOamLTtraceAutoTrMaxTtl,
        tmnxOamLTtraceAutoTrTimeOut,
        tmnxOamLTtraceAutoTrMaxFailures,
        tmnxOamLTtraceAutoPolicy1,
        tmnxOamLTtraceAutoPolicy2,
        tmnxOamLTtraceAutoPolicy3,
        tmnxOamLTtraceAutoPolicy4,
        tmnxOamLTtraceAutoPolicy5,
        tmnxOamLTtraceAutoProbeIntvl,
        tmnxOamLTtraceAutoPrTimeOut,
        tmnxOamLTtraceAutoPrMaxFailures,
        tmnxOamLTtraceAutoDiscoveryState,
        tmnxOamLTtraceAutoTotalFecs,
        tmnxOamLTtraceAutoDisFecs,
        tmnxOamLTtraceAutoLastDisStart,
        tmnxOamLTtraceAutoLastDisEnd,
        tmnxOamLTtraceAutoLastDisDur,
        tmnxOamLTtracePathProbeState,
        tmnxOamLTtracePathProbeTmOutCnt,
        tmnxOamLTtraceMaxConRequests,
        tmnxOamTrHopsRttOFSumSquares,
        tmnxOamTrHopsRttHCSumSquares,
        tmnxOamTrHopsTtOFSumSquares,
        tmnxOamTrHopsTtHCSumSquares,
        tmnxOamTrHopsInTtOFSumSqrs,
        tmnxOamTrHopsInTtHCSumSqrs,
        tmnxOamTrResultsTestRunResult
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Trace Route test
         general capabilities on Nokia SROS series systems 7.0 release, and
         still supported in the latest SROS release."
    ::= { tmnxOamTrGroups 29 }

tmnxOamEthCfmTrV8v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamEthCfmTrCtlTgtMacAddr,
        tmnxOamEthCfmTrCtlSrcMdIndex,
        tmnxOamEthCfmTrCtlSrcMaIndex,
        tmnxOamEthCfmTrCtlSrcMepId,
        tmnxOamEthCfmTrPrHistIngressMac,
        tmnxOamEthCfmTrPrHistEgressMac,
        tmnxOamEthCfmTrPrHistRelayAction,
        tmnxOamEthCfmTrPrHistForwarded,
        tmnxOamEthCfmTrPrHistTerminalMep
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Ethernet CFM trace
         route tests on Nokia SROS series systems 8.0 release."
    ::= { tmnxOamTrGroups 30 }

tmnxOamLspTrV6v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspTrCtlLspName,
        tmnxOamLspTrCtlPathName,
        tmnxOamLspTrCtlLdpPrefixType,
        tmnxOamLspTrCtlLdpPrefix,
        tmnxOamLspTrCtlLdpPrefixLen,
        tmnxOamLspTrCtlPathDestType,
        tmnxOamLspTrCtlPathDest,
        tmnxOamLspTrCtlNhIntfName,
        tmnxOamLspTrCtlNhAddressType,
        tmnxOamLspTrCtlNhAddress,
        tmnxOamLspTrMapAddrType,
        tmnxOamLspTrMapDSIPv4Addr,
        tmnxOamLspTrMapDSIfAddr,
        tmnxOamLspTrMapMTU,
        tmnxOamLspTrDSLabelLabel,
        tmnxOamLspTrDSLabelProtocol
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM LSP Trace Route
         tests on Nokia SROS series systems 6.0 release."
    ::= { tmnxOamTrGroups 31 }

tmnxOamTrGeneralV8v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOamLTtracePathProbeSendErr,
        tmnxOamLTtraceFecSendErrProbes
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Trace Route test
         general capabilities on Nokia SROS series systems 8.0 release."
    ::= { tmnxOamTrGroups 32 }

tmnxOamTrNotificationV8v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamLdpTtraceFecPFailUpdate
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the OAM Trace Route test feature
         on Nokia SROS series systems release 8.0."
    ::= { tmnxOamTrGroups 33 }

tmnxOamVccvTrV9v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvTrCtlSpokeSdpId,
        tmnxOamVccvTrCtlSaiiGlobalId,
        tmnxOamVccvTrCtlSaiiPrefix,
        tmnxOamVccvTrCtlSaiiAcId,
        tmnxOamVccvTrCtlTaiiGlobalId,
        tmnxOamVccvTrCtlTaiiPrefix,
        tmnxOamVccvTrCtlTaiiAcId,
        tmnxOamVccvTrNextSaiiGlobalId,
        tmnxOamVccvTrNextSaiiPrefix,
        tmnxOamVccvTrNextSaiiAcId,
        tmnxOamVccvTrNextTaiiGlobalId,
        tmnxOamVccvTrNextTaiiPrefix,
        tmnxOamVccvTrNextTaiiAcId
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM VCCV
         Trace Route test general capabilities on Nokia SROS series 9.0
         release."
    ::= { tmnxOamTrGroups 34 }

tmnxOamLTtraceV9v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamLTtraceHopLabel1,
        tmnxOamLTtraceHopLabel2,
        tmnxOamLTtraceHopLabel3,
        tmnxOamLTtraceHopLabel4,
        tmnxOamLTtraceHopLabel5,
        tmnxOamLTtraceHopLabel6,
        tmnxOamLTtraceHopIfAddrType,
        tmnxOamLTtraceHopIfAddress,
        tmnxOamLTtraceHopRouterIdType,
        tmnxOamLTtraceHopRouterId
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM LDP Tree
         Discovery capabilities on Nokia SROS series 9.0 release."
    ::= { tmnxOamTrGroups 35 }

tmnxOamTrGeneralV11v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamLTtraceCtlDownstreamMpTlv,
        tmnxOamLspTrCtlAssocChannel,
        tmnxOamLspTrCtlDownstreamMapTlv,
        tmnxOamLspTrCtlForce,
        tmnxOamLspTrCtlMplsTpPathType,
        tmnxOamLspTrCtlTestSubMode,
        tmnxOamLspTrFecStackFecSubType,
        tmnxOamLspTrFecStackOperType,
        tmnxOamLspTrFecStackPrefix,
        tmnxOamLspTrFecStackPrefixLen,
        tmnxOamLspTrFecStackPrefixType,
        tmnxOamLspTrFecStackRemPeerAddr,
        tmnxOamLspTrFecStackRemPeerAddrT,
        tmnxOamTrProbeHistoryRtrnSubcode,
        tmnxOamTrProbeHistorySdpBindId
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Trace
         Route tests on Nokia SROS series systems, release 11.0."
    ::= { tmnxOamTrGroups 36 }

tmnxOamVccvTrV11v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamVccvTrCtlAssocChannel,
        tmnxOamVccvTrCtlTestSubMode
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM VCCV
         trace route tests on Nokia SROS series systems running release 11.0."
    ::= { tmnxOamTrGroups 37 }

tmnxOamTrV11v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrProbeHistorySrcGlobalId,
        tmnxOamTrProbeHistorySrcNodeId,
        tmnxOamVccvTrNextTpAgi,
        tmnxOamVccvTrNextTpSaiiAcId,
        tmnxOamVccvTrNextTpSaiiGlobalId,
        tmnxOamVccvTrNextTpSaiiNodeId,
        tmnxOamVccvTrNextTpTaiiAcId,
        tmnxOamVccvTrNextTpTaiiGlobalId,
        tmnxOamVccvTrNextTpTaiiNodeId
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM trace
         route tests on Nokia SROS series systems running release 11.0."
    ::= { tmnxOamTrGroups 38 }

tmnxOamTrV12v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOamIcmpTrLabelStackBottom,
        tmnxOamIcmpTrLabelStackExperimnt,
        tmnxOamIcmpTrLabelStackLabel,
        tmnxOamIcmpTrLabelStackTtl,
        tmnxOamVccvTrCtlSwitTgtFecType,
        tmnxOamVccvTrTgFec128CtlDstAddr,
        tmnxOamVccvTrTgFec128CtlDstAddrT,
        tmnxOamVccvTrTgFec128CtlPwId,
        tmnxOamVccvTrTgFec128CtlPwType,
        tmnxOamVccvTrTgFec128CtlSrcAddr,
        tmnxOamVccvTrTgFec128CtlSrcAddrT,
        tmnxOamVccvTrTgStaticCtlAgi,
        tmnxOamVccvTrTgStaticCtlSaiiAcId,
        tmnxOamVccvTrTgStaticCtlSaiiGlbl,
        tmnxOamVccvTrTgStaticCtlSaiiNode,
        tmnxOamVccvTrTgStaticCtlTaiiAcId,
        tmnxOamVccvTrTgStaticCtlTaiiGlbl,
        tmnxOamVccvTrTgStaticCtlTaiiNode
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM trace
         route tests on Nokia SROS series systems running release 12.0."
    ::= { tmnxOamTrGroups 39 }

tmnxOamTrObsoleteV13v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspTrMapDSIPv4Addr,
        tmnxOamLspTrMapDSIfAddr,
        tmnxOamTrProbeHistoryRouterID
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM trace route
         operations on Nokia SR series systems that were made obsolete in
         release 13.0."
    ::= { tmnxOamTrGroups 40 }

tmnxOamTrV13v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspTrMapDsEgrIfNum,
        tmnxOamLspTrMapDsIfAddress,
        tmnxOamLspTrMapDsIfAddressType,
        tmnxOamLspTrMapDsIngIfNum,
        tmnxOamLspTrMapDsIpAddress,
        tmnxOamLspTrMapDsIpAddressType,
        tmnxOamTrProbeHistoryNtwrkIfName
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM trace
         route tests on Nokia SROS series systems running release 13.0."
    ::= { tmnxOamTrGroups 41 }

tmnxOamTrObsoleteV14v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamLTtraceAutoStorageType,
        tmnxOamTrCtlDescr,
        tmnxOamTrCtlStorageType
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM trace route
         operations on Nokia SR series systems that were made obsolete in SROS
         release 14.0."
    ::= { tmnxOamTrGroups 42 }

tmnxOamTrV15v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOamEthCfmTrCtlRemoteMepId,
        tmnxOamLspTrCtlIgpInstance,
        tmnxOamMcastTrCtlTestSubMode,
        tmnxOamMcastTrRespInIfIndex,
        tmnxOamMcastTrRespInPktCountHC,
        tmnxOamMcastTrRespLocalAddrType,
        tmnxOamMcastTrRespLocalAddress,
        tmnxOamMcastTrRespMcastRtgProto,
        tmnxOamMcastTrRespOutIfIndex,
        tmnxOamMcastTrRespOutPktCountHC,
        tmnxOamMcastTrRespRtgProtocol2,
        tmnxOamMcastTrRespSGPktCountHC
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM trace
         route tests on Nokia SROS series systems running release 15.0."
    ::= { tmnxOamTrGroups 44 }

tmnxOamTrV16v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOamTrCtlRouterInstanceName
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM trace
         route tests on Nokia SROS series systems running release 16.0."
    ::= { tmnxOamTrGroups 45 }

tmnxOamTrV19v0ObjGroups          OBJECT IDENTIFIER ::= { tmnxOamTrGroups 46 }

tmnxOamTrV19v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOamLspTrCtlSrPlcyColor,
        tmnxOamLspTrCtlSrPlcyEndPtAddT,
        tmnxOamLspTrCtlSrPlcyEndPtAddr,
        tmnxOamLspTrCtlSrPlcySegList
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM Trace
         tests on Nokia SROS series systems running release 19."
    ::= { tmnxOamTrV19v0ObjGroups 1 }

tmnxOamTrV20v0ObjGroups          OBJECT IDENTIFIER ::= { tmnxOamTrGroups 47 }

tmnxOamBierTrV20v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamBierTrCtlBfrId,
        tmnxOamBierTrCtlBfrPfxAddrType,
        tmnxOamBierTrCtlBfrPfxAddress,
        tmnxOamBierTrCtlSubDomain,
        tmnxOamBierTrHistoryBfrId,
        tmnxOamBierTrHistoryDnStrAddr,
        tmnxOamBierTrHistoryDnStrAddrTyp,
        tmnxOamBierTrHistoryDnStrIfAddr,
        tmnxOamBierTrHistoryDnStrIfAddrT,
        tmnxOamBierTrHistoryDnStrIfNum,
        tmnxOamBierTrHistoryReturnCode,
        tmnxOamBierTrHistoryUpStrIfAddr,
        tmnxOamBierTrHistoryUpStrIfAddrT,
        tmnxOamBierTrHistoryUpStrIfNum
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM BIER
         Trace tests on Nokia SROS series systems running release 20."
    ::= { tmnxOamTrV20v0ObjGroups 1 }

tmnxOamTrV21v0ObjGroups          OBJECT IDENTIFIER ::= { tmnxOamTrGroups 48 }

tmnxOamIcmpTrV21v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamIcmpTrCtlDestTcpUdpPort,
        tmnxOamIcmpTrCtlDestUdpPortFixed,
        tmnxOamIcmpTrCtlPadSize,
        tmnxOamIcmpTrCtlProtocol
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of traceroute
         tests on Nokia SROS series systems running release 21."
    ::= { tmnxOamTrV21v0ObjGroups 1 }

tmnxOamSaaConformance            OBJECT IDENTIFIER ::= { tmnxOamTestConformance 3 }

tmnxOamSaaCompliances            OBJECT IDENTIFIER ::= { tmnxOamSaaConformance 1 }

tmnxOamSaaV3v0Compliance         MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM SAA tests on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamSaaGeneralV3v0Group,
            tmnxOamSaaThresholdV3v0Group,
            tmnxOamSaaNotificationV3v0Group
        }
    ::= { tmnxOamSaaCompliances 1 }

tmnxOamSaaV7v0Compliance         MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM SAA tests on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamSaaGeneralV7v0Group,
            tmnxOamSaaThresholdV3v0Group,
            tmnxOamSaaNotificationV3v0Group
        }
    ::= { tmnxOamSaaCompliances 2 }

tmnxOamSaaV8v0Compliance         MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM SAA tests on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamSaaGeneralV7v0Group,
            tmnxOamSaaGeneralV8v0Group,
            tmnxOamSaaThresholdV3v0Group,
            tmnxOamSaaNotificationV3v0Group
        }
    ::= { tmnxOamSaaCompliances 3 }

tmnxOamSaaV10v0Compliance        MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM SAA tests on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamSaaGeneralV7v0Group,
            tmnxOamSaaGeneralV8v0Group,
            tmnxOamSaaThresholdV3v0Group,
            tmnxOamSaaNotificationV3v0Group,
            tmnxOamSaaGeneralV10v0Group
        }
    ::= { tmnxOamSaaCompliances 4 }

tmnxOamSaaGroups                 OBJECT IDENTIFIER ::= { tmnxOamSaaConformance 2 }

tmnxOamSaaGeneralV3v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamSaaCtlRowStatus,
        tmnxOamSaaCtlStorageType,
        tmnxOamSaaCtlLastChanged,
        tmnxOamSaaCtlAdminStatus,
        tmnxOamSaaCtlTestMode,
        tmnxOamSaaCtlDescr,
        tmnxOamSaaCtlRuns,
        tmnxOamSaaCtlFailures,
        tmnxOamSaaCtlLastRunResult
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of OAM SAA test general
         capabilities on Nokia SROS series systems."
    ::= { tmnxOamSaaGroups 1 }

tmnxOamSaaThresholdV3v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamSaaTRowStatus,
        tmnxOamSaaTLastChanged,
        tmnxOamSaaTThreshold,
        tmnxOamSaaTValue,
        tmnxOamSaaTLastSent,
        tmnxOamSaaTTestMode,
        tmnxOamSaaTTestRunIndex
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM Trace Route SAA test
         thresholds on Nokia SROS series systems 3.0R1."
    ::= { tmnxOamSaaGroups 2 }

tmnxOamSaaNotificationV3v0Group  NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamSaaThreshold
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the OAM Trace Route test feature
         on Nokia SROS series systems."
    ::= { tmnxOamSaaGroups 3 }

tmnxOamSaaGeneralV7v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamSaaCtlRowStatus,
        tmnxOamSaaCtlLastChanged,
        tmnxOamSaaCtlAdminStatus,
        tmnxOamSaaCtlTestMode,
        tmnxOamSaaCtlDescr,
        tmnxOamSaaCtlRuns,
        tmnxOamSaaCtlFailures,
        tmnxOamSaaCtlLastRunResult,
        tmnxOamSaaCtlAcctPolicyId,
        tmnxOamSaaCtlSuppressAccounting
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM SAA test general
         capabilities on Nokia SROS series systems 7.0 release, and still
         supported in the latest SROS release."
    ::= { tmnxOamSaaGroups 4 }

tmnxOamSaaGeneralV8v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOamSaaCtlContinuous
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM SAA test
         general capabilities on Nokia SROS series systems 8.0 release."
    ::= { tmnxOamSaaGroups 5 }

tmnxOamSaaGeneralV10v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOamSaaCtlKeepProbeHistoryAdm,
        tmnxOamSaaCtlKeepProbeHistoryOpr
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM SAA test
         general capabilities on Nokia SROS Release 10.0 systems."
    ::= { tmnxOamSaaGroups 6 }

tmnxOamSaaObsoleteV14v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOamSaaCtlStorageType
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM SAA operations on
         Nokia SR series systems that were made obsolete in SROS release 14.0."
    ::= { tmnxOamSaaGroups 7 }

tmnxOamMobGatewayConformance     OBJECT IDENTIFIER ::= { tmnxOamTestConformance 4 }

tmnxOamGeneralConformance        OBJECT IDENTIFIER ::= { tmnxOamTestConformance 5 }

tmnxOamGeneralCompliances        OBJECT IDENTIFIER ::= { tmnxOamGeneralConformance 1 }

tmnxOamGeneralV8v0Compliance     MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OAM general capabilities on
         Nokia SROS series systems for Release 8.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamGeneralV8v0Group
        }
    ::= { tmnxOamGeneralCompliances 1 }

tmnxOamGeneralV10v0Compliance    MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM general capabilities on
         Nokia SROS series systems for Release 10.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamGeneralV8v0Group,
            tmnxOamGeneralV10v0Group
        }
    ::= { tmnxOamGeneralCompliances 2 }

tmnxOamGeneralV11v0Compliance    MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM general capabilities
         added in Nokia SROS series systems for Release 11.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamGeneralV11v0Group
        }
    ::= { tmnxOamGeneralCompliances 3 }

tmnxOamGeneralV14v0Compliance    MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM general capabilities
         added in Nokia SROS series systems for Release 14.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamGeneralV14v0Group
        }
    ::= { tmnxOamGeneralCompliances 6 }

tmnxOamGeneralV19v0Compliance    MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM general capabilities
         added in Nokia SROS series systems for Release 19."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamGeneralV19v0Group
        }
    ::= { tmnxOamGeneralCompliances 9 }

tmnxOamGeneralV20v0Compliance    MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM general capabilities
         added in Nokia SROS series systems for Release 20."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamGenPoolShareV20v0Group,
            tmnxOamGenPoolSplitV20v0Group
        }
    ::= { tmnxOamGeneralCompliances 10 }

tmnxOamGeneralGroups             OBJECT IDENTIFIER ::= { tmnxOamGeneralConformance 2 }

tmnxOamGeneralV8v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOamMplsPduTimeStampFormat
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM test general
         capabilities on Nokia SROS systems, release 8.0 R4."
    ::= { tmnxOamGeneralGroups 1 }

tmnxOamGeneralV10v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamSysPerfOprLimitTx,
        tmnxOamSysPerfCfgLimitTx,
        tmnxOamSysPerfCfgTotalTx,
        tmnxOamSysPerfLastClearedTime,
        tmnxOamSysPerfLocalTestTx,
        tmnxOamSysPerfRemoteTestRx,
        tmnxOamSysPerfReqTypeLocalTestTx,
        tmnxOamSysPerfReqTypeRemoteTstRx,
        tmnxOamSysSessionLimit,
        tmnxOamSysSessionCount
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OAM test general
         capabilities on Nokia SROS systems, release 10.0."
    ::= { tmnxOamGeneralGroups 2 }

tmnxOamGeneralV11v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamMplsEchoDownstreamMapTlv
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of general OAM
         test capabilities on Nokia SROS systems, release 11.0."
    ::= { tmnxOamGeneralGroups 3 }

tmnxOamGeneralV14v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamSysBgIcmpBrgSessionCount,
        tmnxOamSysBgIcmpBrgSessionLimit
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of general OAM
         test capabilities on Nokia SROS systems, release 14.0."
    ::= { tmnxOamGeneralGroups 6 }

tmnxOamGeneralV19v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOamSysLspSelfPingSessCount,
        tmnxOamSysLspSelfPingSessLimit,
        tmnxOamSysPerfCfgLspSelfTxLimit,
        tmnxOamSysPerfCfgLspSelfTxTotal
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of general OAM
         test capabilities on Nokia SROS systems, release 19."
    ::= { tmnxOamGeneralGroups 9 }

tmnxOamGenPoolSplitV20v0Group    OBJECT-GROUP
    OBJECTS     {
        tmnxOamSysTestLimit,
        tmnxOamSysTestCount,
        tmnxOamSysTxLimit,
        tmnxOamSysTxTotal
    }
    STATUS      current
    DESCRIPTION
        "A group of additional objects supporting management of general OAM
         test capabilities on Nokia SROS systems, release 20."
    ::= { tmnxOamGeneralGroups 10 }

tmnxOamGenPoolShareV20v0Group    OBJECT-GROUP
    OBJECTS     {
        tmnxOamSysShareTestLimit,
        tmnxOamSysShareTestCount,
        tmnxOamSysShareTxLimit,
        tmnxOamSysShareTxTotal
    }
    STATUS      current
    DESCRIPTION
        "A group of additional objects supporting management of general OAM
         test capabilities on Nokia SROS systems, release 20."
    ::= { tmnxOamGeneralGroups 11 }

tmnxOamGenObsoletedV21v0Group    OBJECT-GROUP
    OBJECTS     {
        tmnxOamIcmpPingCtlEgrIfIndex,
        tmnxOamSysPerfOprLimitTx,
        tmnxOamSysPerfCfgLimitTx,
        tmnxOamSysPerfCfgTotalTx,
        tmnxOamSysSessionLimit,
        tmnxOamSysSessionCount
    }
    STATUS      current
    DESCRIPTION
        "The group of OAM general objects obsoleted in release 21."
    ::= { tmnxOamGeneralGroups 12 }

tmnxOamDiagConformance           OBJECT IDENTIFIER ::= { tmnxOamTestConformance 6 }

tmnxOamDiagCompliances           OBJECT IDENTIFIER ::= { tmnxOamDiagConformance 1 }

tmnxOamDiagV16v0Compliance       MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM diagnostic capabilities
         added in Nokia SROS series systems for Release 16.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamDiagNotificationV16v0Grp,
            tmnxOamDiagNotifyObjsV16v0Group,
            tmnxOamDiagV16v0Group
        }
    ::= { tmnxOamDiagCompliances 1 }

tmnxOamDiagGroups                OBJECT IDENTIFIER ::= { tmnxOamDiagConformance 2 }

tmnxOamDiagV16v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOamBuildPktDot1qLastChanged,
        tmnxOamBuildPktDot1qPrioCodePt,
        tmnxOamBuildPktDot1qTagProtoId,
        tmnxOamBuildPktDot1qVlanId,
        tmnxOamBuildPktEthDstMacAddr,
        tmnxOamBuildPktEthLastChanged,
        tmnxOamBuildPktEthSrcMacAddr,
        tmnxOamBuildPktGtpUserLastChgd,
        tmnxOamBuildPktGtpUserTunnEpIdHi,
        tmnxOamBuildPktGtpUserTunnEpIdLo,
        tmnxOamBuildPktHdrLastChanged,
        tmnxOamBuildPktHdrOvrLastChanged,
        tmnxOamBuildPktHdrOvrRowStatus,
        tmnxOamBuildPktHdrRowStatus,
        tmnxOamBuildPktHdrType,
        tmnxOamBuildPktHeaderSeq,
        tmnxOamBuildPktIPsecAuthLastChgd,
        tmnxOamBuildPktIPsecAuthSecPrIdx,
        tmnxOamBuildPktIPv4MoreFragments,
        tmnxOamBuildPktIpDscp,
        tmnxOamBuildPktIpDstIpAddrType,
        tmnxOamBuildPktIpDstIpAddress,
        tmnxOamBuildPktIpLastChanged,
        tmnxOamBuildPktIpSrcIpAddrType,
        tmnxOamBuildPktIpSrcIpAddress,
        tmnxOamBuildPktL2tpLastChanged,
        tmnxOamBuildPktL2tpSessionId,
        tmnxOamBuildPktL2tpTunnelId,
        tmnxOamBuildPktLastChanged,
        tmnxOamBuildPktMplsLabel,
        tmnxOamBuildPktMplsLastChanged,
        tmnxOamBuildPktMplsTrafficClass,
        tmnxOamBuildPktPbbIsid,
        tmnxOamBuildPktPbbLastChanged,
        tmnxOamBuildPktPbbTagProtocolId,
        tmnxOamBuildPktRowStatus,
        tmnxOamBuildPktTcpUdpDstPort,
        tmnxOamBuildPktTcpUdpLastChanged,
        tmnxOamBuildPktTcpUdpSrcPort,
        tmnxOamDiagCtlAdminState,
        tmnxOamDiagCtlLastChanged,
        tmnxOamDiagCtlRowStatus,
        tmnxOamDiagCtlTestMode,
        tmnxOamFindEgrDiagCtlIngPortId,
        tmnxOamFindEgrDiagCtlLastChanged,
        tmnxOamFindEgrDiagCtlPacketNum,
        tmnxOamFindEgrDiagEgrRtrInstName,
        tmnxOamFindEgrDiagEgressIfName,
        tmnxOamFindEgrDiagEgressPort,
        tmnxOamFindEgrDiagNextHopAddrTyp,
        tmnxOamFindEgrDiagNextHopAddress,
        tmnxOamFindEgrDiagOperState
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of OAM
         diagnostic capabilities on Nokia SROS systems, release 16.0."
    ::= { tmnxOamDiagGroups 1 }

tmnxOamDiagNotificationV16v0Grp  NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOamDiagTestCompleted
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting OAM Diagnostic tests on Nokia
         SROS series systems release 16.0."
    ::= { tmnxOamDiagGroups 2 }

tmnxOamDiagNotifyObjsV16v0Group  OBJECT-GROUP
    OBJECTS     {
        tmnxOamTestRunIndex
    }
    STATUS      current
    DESCRIPTION
        "The group of additional accessible-for-notify objects supporting
         management of OAM diagnostic capabilities on Nokia SROS systems,
         release 16.0."
    ::= { tmnxOamDiagGroups 3 }

tmnxOamIfPingConformance         OBJECT IDENTIFIER ::= { tmnxOamTestConformance 7 }

tmnxOamIfPingCompliances         OBJECT IDENTIFIER ::= { tmnxOamIfPingConformance 1 }

tmnxOamIfPingV20v0Compliance     MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OAM ICMP status
         propagation."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamIfPingV20v0Group
        }
    ::= { tmnxOamIfPingCompliances 1 }

tmnxOamLnkMeasConformance        OBJECT IDENTIFIER ::= { tmnxOamTestConformance 8 }

tmnxOamLnkMeasCompliances        OBJECT IDENTIFIER ::= { tmnxOamLnkMeasConformance 1 }

tmnxOamLnkMeasV21v0Compliance    MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the OAM Link Measurement functionality on
         Nokia SROS Release 21.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxOamLnkMeasV21v0Group
        }
    ::= { tmnxOamLnkMeasCompliances 1 }

tmnxOamTestNotifications         OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 11 }

tmnxOamPingNotifyPrefix          OBJECT IDENTIFIER ::= { tmnxOamTestNotifications 1 }

tmnxOamPingNotifications         OBJECT IDENTIFIER ::= { tmnxOamPingNotifyPrefix 0 }

tmnxOamPingProbeFailed           NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTargetIpAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      obsolete
    DESCRIPTION
        "Generated when a probe failure is detected when the
         corresponding tmnxOamPingCtlTrapGeneration object is set to
         probeFailure(0) subject to the value of
         tmnxOamPingCtlTrapProbeFailureFilter.  The object
         tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the
         number of successive probe failures that are required
         before this notification can be generated."
    ::= { tmnxOamPingNotifications 1 }

tmnxOamPingTestFailed            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTargetIpAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      obsolete
    DESCRIPTION
        "Generated when a ping test is determined to have failed
         when the corresponding tmnxOamPingCtlTrapGeneration object is
         set to testFailure(1).  In this instance
         tmnxOamPingCtlTrapTestFailureFilter should specify the number of
         probes in a test required to have failed in order to
         consider the test as failed."
    ::= { tmnxOamPingNotifications 2 }

tmnxOamPingTestCompleted         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTargetIpAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      obsolete
    DESCRIPTION
        "Generated at the completion of a ping test when the corresponding
         tmnxOamPingCtlTrapGeneration object is set to testCompletion(2)."
    ::= { tmnxOamPingNotifications 3 }

tmnxOamPingProbeFailedV2         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      obsolete
    DESCRIPTION
        "Generated when a probe failure is detected when the
         corresponding tmnxOamPingCtlTrapGeneration object is set to
         probeFailure(0) subject to the value of
         tmnxOamPingCtlTrapProbeFailureFilter.  The object
         tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the
         number of successive probe failures that are required
         before this notification can be generated."
    ::= { tmnxOamPingNotifications 4 }

tmnxOamPingTestFailedV2          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      obsolete
    DESCRIPTION
        "Generated when a ping test is determined to have failed
         when the corresponding tmnxOamPingCtlTrapGeneration object is
         set to testFailure(1).  In this instance
         tmnxOamPingCtlTrapTestFailureFilter should specify the number of
         probes in a test required to have failed in order to
         consider the test as failed."
    ::= { tmnxOamPingNotifications 5 }

tmnxOamPingTestCompletedV2       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      obsolete
    DESCRIPTION
        "Generated at the completion of a ping test when the corresponding
         tmnxOamPingCtlTrapGeneration object is set to testCompletion(2)."
    ::= { tmnxOamPingNotifications 6 }

tmnxAncpLoopbackTestCompleted    NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamAncpHistoryAncpString
    }
    STATUS      current
    DESCRIPTION
        "This Notification is sent whenever a ANCP loopback is finished for
         which a notification was explicitly requested."
    ::= { tmnxOamPingNotifications 7 }

tmnxOamPingProbeFailedV3         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsRttOFSumSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOamPingProbeFailedV3 notification is sent at the end
         of an OAM or SAA ping test run, when a sufficient number of successive
         probes failed.

         The notification is sent if both of the following conditions are met:
         1.  The 'probeFailure(0)' bit of the tmnxOamPingCtlTrapGeneration BITS
             object is enabled, AND
         2.  The test run includes at least one occurrence of N successive probe
             failures, where N is configured using
             tmnxOamPingCtlTrapProbeFailureFilter.

         This notification is sent at most once per test run.

         [EFFECT] Informational.  The probe failures may indicate a problem with
         live traffic flow.

         [RECOVERY] Investigate the cause of the probe failures."
    ::= { tmnxOamPingNotifications 8 }

tmnxOamPingTestFailedV3          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsRttOFSumSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOamPingTestFailedV3 notification is sent at the end of
         an OAM or SAA ping test run, when a sufficient number of probes
         failed.

         The notification is sent if both of the following conditions are met:
         1.  The 'testFailure(1)' bit of the tmnxOamPingCtlTrapGeneration BITS
             object is enabled, AND
         2.  The test run had at least N probe failures, where N is configured
             using tmnxOamPingCtlTrapTestFailureFilter.

         This notification is sent at most once per test run.

         [EFFECT] Informational.  The probe failures may indicate a problem with
         live traffic flow.

         [RECOVERY] Investigate the cause of the probe failures."
    ::= { tmnxOamPingNotifications 9 }

tmnxOamPingTestCompletedV3       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamPingCtlTgtAddrType,
        tmnxOamPingCtlTgtAddress,
        tmnxOamPingResultsOperStatus,
        tmnxOamPingResultsMinRtt,
        tmnxOamPingResultsMaxRtt,
        tmnxOamPingResultsAverageRtt,
        tmnxOamPingResultsRttSumOfSquares,
        tmnxOamPingResultsRttOFSumSquares,
        tmnxOamPingResultsMtuResponseSize,
        tmnxOamPingResultsSvcPing,
        tmnxOamPingResultsProbeResponses,
        tmnxOamPingResultsSentProbes,
        tmnxOamPingResultsLastGoodProbe
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOamPingTestCompletedV3 notification is sent at the end
         of an OAM or SAA ping test run (if the 'testCompletion(2)' bit of the
         corresponding tmnxOamPingCtlTrapGeneration object is enabled).

         [EFFECT] Informational.  If the test run failed (e.g. the number of
         probes received is less than the number of probes sent), there may be a
         corresponding problem with live traffic flow.

         [RECOVERY] If the test run failed, investigate the cause."
    ::= { tmnxOamPingNotifications 10 }

tmnxOamTraceRouteNotifyPrefix    OBJECT IDENTIFIER ::= { tmnxOamTestNotifications 2 }

tmnxOamTraceRouteNotifications   OBJECT IDENTIFIER ::= { tmnxOamTraceRouteNotifyPrefix 0 }

tmnxOamTrPathChange              NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamTrCtlTestMode,
        tmnxOamTrCtlLastRunResult,
        tmnxOamTrResultsOperStatus
    }
    STATUS      current
    DESCRIPTION
        "The path to a target has changed."
    ::= { tmnxOamTraceRouteNotifications 1 }

tmnxOamTrTestFailed              NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamTrCtlTestMode,
        tmnxOamTrCtlLastRunResult,
        tmnxOamTrResultsOperStatus
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOamTrTestFailed notification is sent when an OAM or
         SAA trace test run failed (if the 'testFailure(1)' bit of the
         corresponding tmnxOamTrCtlTrapGeneration object is enabled).

         This notification is sent at most once per test run.

         [EFFECT] Informational.  The test run failure may indicate a problem
         with the corresponding live traffic flow.

         [RECOVERY] Investigate the cause of the test run failure."
    ::= { tmnxOamTraceRouteNotifications 2 }

tmnxOamTrTestCompleted           NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamTrCtlTestMode,
        tmnxOamTrCtlLastRunResult,
        tmnxOamTrResultsOperStatus
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOamTrTestCompleted notification is sent at the end of
         an OAM or SAA trace test run (if the 'testCompletion(2)' bit of the
         corresponding tmnxOamTrCtlTrapGeneration object is enabled).

         [EFFECT] Informational.  If the test run failed (e.g. a probe timed
         out), there may be a corresponding problem with live traffic flow.

         [RECOVERY] If the test run failed, investigate the cause."
    ::= { tmnxOamTraceRouteNotifications 3 }

tmnxOamLdpTtraceAutoDiscState    NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamLTtraceAutoDiscoveryState
    }
    STATUS      current
    DESCRIPTION
        "The tmnxOamLdpTtraceAutoDiscState notification is generated when the
         discovery state of the 'background LDP Tree Trace entity' represented
         by tmnxOamLTtraceAutoDiscoveryState has been changed."
    ::= { tmnxOamTraceRouteNotifications 4 }

tmnxOamLdpTtraceFecProbeState    NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamLTtraceFecProbeState,
        tmnxOamLTtraceFecDisPaths,
        tmnxOamLTtraceFecFailedProbes,
        tmnxOamLTtraceFecSendErrProbes
    }
    STATUS      current
    DESCRIPTION
        "The tmnxOamLdpTtraceFecProbeState notification is generated when the
         probe state of the 'auto discovered FEC' has been changed."
    ::= { tmnxOamTraceRouteNotifications 5 }

tmnxOamLdpTtraceFecDisStatus     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamLTtraceFecDisStatusBits,
        tmnxOamLTtraceFecDisPaths
    }
    STATUS      current
    DESCRIPTION
        "The tmnxOamLdpTtraceFecDisStatus notification is generated when
         the discovery status BITS or the number of discovered paths of the
         'auto discovered FEC' has been changed.  Note that the changes are
         evaluated at the end of a FEC discovery."
    ::= { tmnxOamTraceRouteNotifications 6 }

tmnxOamLdpTtraceFecPFailUpdate   NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamLTtraceFecProbeState,
        tmnxOamLTtraceFecDisPaths,
        tmnxOamLTtraceFecFailedProbes,
        tmnxOamLTtraceFecSendErrProbes
    }
    STATUS      current
    DESCRIPTION
        "The tmnxOamLdpTtraceFecPFailUpdate notification is generated when
         there is a probe state change in any of the relevant discovered paths
         while the overall FEC probe state, tmnxOamLTtraceFecProbeState is in
         'partially failed' state."
    ::= { tmnxOamTraceRouteNotifications 7 }

tmnxOamSaaNotifyPrefix           OBJECT IDENTIFIER ::= { tmnxOamTestNotifications 3 }

tmnxOamSaaNotifications          OBJECT IDENTIFIER ::= { tmnxOamSaaNotifyPrefix 0 }

tmnxOamSaaThreshold              NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamSaaTThreshold,
        tmnxOamSaaTValue,
        tmnxOamSaaCtlTestMode,
        tmnxOamSaaCtlLastRunResult,
        tmnxOamSaaTTestRunIndex
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOamSaaThreshold notification is a Threshold Crossing
         Alert (TCA).  The TCA is generated at the end of an SAA test run when
         a traffic statistic (e.g. round trip latency) crosses a configured
         threshold.  An SAA threshold is configured using tmnxOamSaaTThreshold.

         [EFFECT] If the TCA is 'rising(1)', the test run results may indicate
         a problem with the corresponding customer traffic. If the TCA is
         'falling(2)', the TCA indicates an improvement in the test run
         results.

         [RECOVERY] Investigate the cause of the latency, loss, or jitter
         problem."
    ::= { tmnxOamSaaNotifications 1 }

tmnxOamDiagNotifyPrefix          OBJECT IDENTIFIER ::= { tmnxOamTestNotifications 6 }

tmnxOamDiagNotifications         OBJECT IDENTIFIER ::= { tmnxOamDiagNotifyPrefix 0 }

tmnxOamDiagTestCompleted         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOamDiagCtlTestMode,
        tmnxOamTestRunIndex
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOamDiagTestCompleted trap is generated at the end of
         every diagnostic test run.  A diagnostic test is configured using
         tmnxOamDiagCtlTable.

         tmnxOamDiagCtlTestMode indicates the type of the diagnostic test (e.g.
         'findEgressDiag(1)').

         tmnxOamTestRunIndex indicates the run number of the completed
         diagnostic test run.  For example, the second run of a test with owner
         'owner_A' and test 'test_Z' has tmnxOamTestRunIndex=2.

         [EFFECT] The result of the test run can be read (e.g. from the
         indicated row in tmnxOamFindEgrDiagResultsTable).

         [RECOVERY] No recovery is required."
    ::= { tmnxOamDiagNotifications 1 }

END