path: root/MIBS/nokia/aos7/ALCATEL-IND1-IPV6-MIB

ALCATEL-IND1-IPV6-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
        IpAddress, Integer32, Unsigned32, Counter32
                FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, PhysAddress, RowStatus, TimeStamp, TruthValue, DateAndTime
                FROM SNMPv2-TC
        SnmpAdminString
                FROM SNMP-FRAMEWORK-MIB
        MODULE-COMPLIANCE, OBJECT-GROUP,
        NOTIFICATION-GROUP
                FROM SNMPv2-CONF
        Ipv6Address, Ipv6IfIndexOrZero
                FROM IPV6-TC
        softentIND1Ipv6
                FROM ALCATEL-IND1-BASE
        ipv6IfIndex, ipv6RouteEntry
                FROM IPV6-MIB
	alaVirtualRouterName
		FROM ALCATEL-IND1-VIRTUALROUTER-MIB;


alcatelIND1IPv6MIB MODULE-IDENTITY
    LAST-UPDATED "201503240000Z"
    ORGANIZATION "Alcatel-Lucent"
    CONTACT-INFO
        "Please consult with Customer Service to ensure the most appropriate
         version of this document is used with the products in question:

                    Alcatel-Lucent, Enterprise Solutions Division
                   (Formerly Alcatel Internetworking, Incorporated)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America

        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507

        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):

             Propietary IPv6 MIB definitions

         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.

         No liability shall be assumed for any incidental, indirect, special,
         or consequential damages whatsoever arising from or related to this
         document or the information contained herein.

         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.

                     Copyright (C) 1995-2015 Alcatel-Lucent
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "201604120000Z"
    DESCRIPTION
        "Correct specification of objects included in 
	 alaIPv6InterfaceNeighborLimitExceeded trap."

    REVISION      "201503240000Z"
    DESCRIPTION
        "Router Advertisement filtering changes."

    REVISION      "201410140000Z"
    DESCRIPTION
        "Module compliance section update."

    REVISION      "201409180000Z"
    DESCRIPTION
        "Added alaIPv6InterfaceStatsTable."

    REVISION      "201408120000Z"
    DESCRIPTION
        "Added alaIPv6NeighborPortIfIndex.  Deprecated alaIPv6NeighborChassis, 
	 alaIPv6NeighborSlot, alaIPv6NeighborPort and alaIPv6RAFilterTrustedTable.

	 Added alaIPv6RAFilterTrustedPortTable.  Obsoleted alaIPv6RAFilterTrustedTable."

    REVISION      "201405200000Z"
    DESCRIPTION
        "Added alaIPv6InterfaceRouterPreference."

    REVISION      "201402280000Z"
    DESCRIPTION
        "Updated alaIPv6InterfaceTable description for loopback0 support.  
         Changed range/updated description for alaIPv6InterfaceEUI64AddressPrefixLength."

    REVISION      "201307300000Z"
    DESCRIPTION
        "Added alaIPv6InterfaceRetransBackoff and alaIPv6InterfaceRetransMax"

    REVISION      "201307290000Z"
    DESCRIPTION
        "Allow 0 as valid value for alaIPv6InterfaceDADTransmits."

    REVISION      "201303130000Z"
    DESCRIPTION
        "Added neighbour cache limit objects (global, per-VRF, per-interface).
         Added Local Proxy Neighbor Discovery objects."

    REVISION      "201202070000Z"
    DESCRIPTION
        "Added alaIPv6NeighborChassis"

    REVISION      "201103090000Z"
    DESCRIPTION
        "Increased size of alaIPv6InterfaceName to 32"

    REVISION      "201005130000Z"
    DESCRIPTION
        "Fixed the Notifications to use MIB Module OID.0 as Notifications root."

    REVISION      "201001060000Z"
    DESCRIPTION
        "The latest version of this MIB Module."

    ::= { softentIND1Ipv6 1 }

alcatelIND1IPv6MIBNotifications OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For IPv6 MIB Subsystem Notifications."
        ::= { alcatelIND1IPv6MIB 0 }

alcatelIND1IPv6MIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIB 1 }


AlaIPv6AddressPrefix ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "2x:"
    STATUS       current
    DESCRIPTION
        "A data type for the 8 byte IPv6 prefixes for EUI-64 addresses"
    SYNTAX      OCTET STRING (SIZE (8))

AlaIPv6RAFilterTrustedSourceType ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
        "A value that represents the type of an RA Filter trusted source.

         port(1)   A physical port or link aggregation ifIndex
                   as defined by the AlaIPv6RAFilterTrustedSourceIfIndex
                   textual convention
         netAddress(2)  A layer 3 IPv6 address as defined by the 
                        Ipv6Address textual convention
         physAddress(3) A layer 2 physical address as defined by the 
                        PhysAddress textual convention"
    SYNTAX	INTEGER {
    		   port(1),
		   netAddress(2),
		   physAddress(3)
		}

AlaIPv6RAFilterTrustedSourceValue ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"The value identifying a trusted source.  The value must be
	 interpreted within the context of an AlaIPv6RAFilterTrustedSourceType
	 value."
    SYNTAX	OCTET STRING (SIZE (1..255))

AlaIPv6RAFilterTrustedSourceIfIndex ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "4d"
    STATUS	 current
    DESCRIPTION
	"The ifIndex value identifying a trusted source port or 
	 link aggregation.  The ifIndex value is in network byte order."
    SYNTAX	 OCTET STRING (SIZE(4)) 


--
-- Alcatel IPv6 Configuration
--

alaIPv6Config OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBObjects 1 }

alaIPv6ClearNeighbors OBJECT-TYPE
    SYNTAX      INTEGER { clear(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Clear all non-static entries from the Neighbor table."
    ::= { alaIPv6Config 1 }

alaIPv6ClearTraffic OBJECT-TYPE
    SYNTAX      INTEGER { clear(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reset all IPv6 traffic counters."
    ::= { alaIPv6Config 2 }

alaIPv6ClearPMTUTable OBJECT-TYPE
    SYNTAX      INTEGER { clear(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Clear the path MTU table."
    ::= { alaIPv6Config 3 }

alaIPv6PMTUMinLifetime  OBJECT-TYPE
    SYNTAX      Unsigned32 (10..1440)
    UNITS       "minutes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set the minimum lifetime for entries in the
        path MTU table."
    DEFVAL      { 60 }
    ::= { alaIPv6Config 4 }

alaIPv6NeighborStaleLifetime  OBJECT-TYPE
    SYNTAX      Unsigned32 (5..2880)
    UNITS       "minutes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set the minimum lifetime for neighbor entries in the
        stale state.

        In older versions of this MIB the default was specified
        as 1440 minutes."
    DEFVAL      { 10 }
    ::= { alaIPv6Config 5 }

alaIPv6GlobalID  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(5))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The global ID used in the creation of local IPv6 unicast
      addresses (RFC 4193).  An explicit value may be specified for
      the global ID or this object may be set to all zero to have a
      global ID be created based on the algorithm from the RFC."
    ::= { alaIPv6Config 6 }

alaIPv6VirtualSourceMAC OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "If set to enable(1) when a packet's source address is a
         VRRP virtual IPv6 address, the corresponding VRRP virtual
         MAC will be used as the source L2 address.

         If set to disable(2), the default, the interface's real
         MAC will be used as the source L2 address."
    DEFVAL      { disable }
    ::= { alaIPv6Config 7 }

alaIPv6NeighborLimit  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The system-wide maximum size of the neighbor cache.  A value
	of 0 indicates that no limit will be enforced.  The minimum
	value is 200 entries."
    DEFVAL      { 8000 }
    ::= { alaIPv6Config 8 }

alaIPv6NeighborVRFLimit  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum size of the neighbor cache for a specific VRF.  
	A value	of 0 indicates that no limit is set.  The minimum
	value is 200 entries."
    DEFVAL      { 0 }
    ::= { alaIPv6Config 9 }


--
-- Alcatel IPv6 Interface Table
--

alaIPv6InterfaceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6InterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table allowing the creation and removal of IPv6
        interfaces.

        The table is indexed by ipv6IfIndex.  The value of
        ipv6IfIndex shall be a four byte value in one of
        the following formats:

          0x0000vvvv - The interface for VLAN vvvv
          0x0100tttt - The interface for tunnel tttt
          0x02000001 - The IPv6 loopback interface
          0x0300nnnn - A loopback0 interface with ID nnnn

        The IPv6 loopback interface's configuration cannot be
	modified.

	A loopback0 interface's configuration cannog be modified
	other than to change its name or administrative status.
	When creating a new loopback0 interface, the special
	ipv6IfIndex value of 0x03000000 should be specified 
	(ID of 0).  Upon creation the interface will automatically
	be assigned its actual ID and ipv6IfIndex."
    ::= { alcatelIND1IPv6MIBObjects 2 }

alaIPv6InterfaceEntry OBJECT-TYPE
    SYNTAX      AlaIPv6InterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An IPv6 interface entry."
    INDEX       { ipv6IfIndex }
    ::= { alaIPv6InterfaceTable 1 }

AlaIPv6InterfaceEntry ::= SEQUENCE {
    alaIPv6InterfaceRowStatus                   RowStatus,
    alaIPv6InterfaceDescription                 SnmpAdminString,
    alaIPv6InterfaceMtu                         Unsigned32,
    alaIPv6InterfaceType                        INTEGER,
    alaIPv6InterfaceAdminStatus                 INTEGER,
    alaIPv6InterfaceSendRouterAdvertisements    INTEGER,
    alaIPv6InterfaceMaxRtrAdvInterval           Unsigned32,
    alaIPv6InterfaceAdvManagedFlag              TruthValue,
    alaIPv6InterfaceAdvOtherConfigFlag          TruthValue,
    alaIPv6InterfaceAdvReachableTime            Unsigned32,
    alaIPv6InterfaceAdvRetransTimer             Unsigned32,
    alaIPv6InterfaceAdvDefaultLifetime          Unsigned32,
    alaIPv6InterfaceName                        SnmpAdminString,
    alaIPv6InterfaceAdvSendMtu                  TruthValue,
    alaIPv6InterfaceReachableTime               Unsigned32,
    alaIPv6InterfaceBaseReachableTime           Unsigned32,
    alaIPv6InterfaceMinRtrAdvInterval           Unsigned32,
    alaIPv6InterfaceClockSkew                   Unsigned32,
    alaIPv6InterfaceRetransTimer                Unsigned32,
    alaIPv6InterfaceDADTransmits                Unsigned32,
    alaIPv6InterfaceAdvHopLimit                 Unsigned32,
    alaIPv6InterfaceLPND                        INTEGER,
    alaIPv6InterfaceRAFilter                    INTEGER,
    alaIPv6InterfaceNeighborLimit               Unsigned32,
    alaIPv6InterfaceRetransBackoff              Unsigned32,
    alaIPv6InterfaceRetransMax                  Unsigned32,
    alaIPv6InterfaceRouterPreference            INTEGER
}

alaIPv6InterfaceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Used to control the addition and removal of IPv6
        interfaces."
    ::= { alaIPv6InterfaceEntry 1 }

alaIPv6InterfaceDescription OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..80))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IPv6 interface's description."
    ::= { alaIPv6InterfaceEntry 2 }

alaIPv6InterfaceMtu OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The IPv6 interface's maximum transmission unit."
    ::= { alaIPv6InterfaceEntry 3 }

alaIPv6InterfaceType OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),
                    vlan(2),
                    tunnel(3),
                    loopback(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interface type."
    ::= { alaIPv6InterfaceEntry 4 }

alaIPv6InterfaceAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Interface administrative status."
    ::= { alaIPv6InterfaceEntry 5 }

alaIPv6InterfaceSendRouterAdvertisements OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specify whether the router sends periodic router
         advertisements and responds to router solicitations
         on the interface.

         The default value for most interfaces is enable(1).
         Some interface types (e.g. 6to4 tunnel) cannot send
         router advertisements so the default (and only)
         value for those interfaces is disable(2)."
    DEFVAL      {enable}
    ::= { alaIPv6InterfaceEntry 6 }

alaIPv6InterfaceMaxRtrAdvInterval OBJECT-TYPE
    SYNTAX      Unsigned32 (4..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum time allowed between sending unsolicited
        multicast router advertisements from the interface."
    DEFVAL      {600}
    ::= { alaIPv6InterfaceEntry 7 }

alaIPv6InterfaceAdvManagedFlag OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "The TRUE/FALSE value to be placed in the 'Managed
        address configuration' flag field in router advertisements."
    DEFVAL  { false }
    ::= { alaIPv6InterfaceEntry 8 }

alaIPv6InterfaceAdvOtherConfigFlag OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "The TRUE/FALSE value to be placed in the 'Other stateful
        configuration' flag field in router advertisements."
    DEFVAL  { false }
    ::= { alaIPv6InterfaceEntry 9 }

alaIPv6InterfaceAdvReachableTime OBJECT-TYPE
    SYNTAX      Unsigned32 (0..3600000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value to be placed in the Reachable Time field in
        the router advertisements sent over this interface.  The
        value zero means unspecified by this router."
    DEFVAL      {0}
    ::= { alaIPv6InterfaceEntry 10 }

alaIPv6InterfaceAdvRetransTimer OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value to be placed in the Retrans Timer field in
        the router advertisements sent over this interface.  The
        value zero means unspecified by this router."
    DEFVAL      {0}
    ::= { alaIPv6InterfaceEntry 11 }

alaIPv6InterfaceAdvDefaultLifetime OBJECT-TYPE
    SYNTAX      Unsigned32 (0..9000)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value to be placed in the Router Lifetime field in
        the router advertisements sent over this interface.

        The value MUST be either zero, 1, or between
        alaIPv6InterfaceMaxRtrAdvInterval and 9000 seconds.

        The special value zero indicates that the router is not
        to be used as a default router.

        The special value 1 indicates that this object's true
        value should be computed using the formula
        3 * alaIPv6InterfaceMaxRtrAdvInterval."
    DEFVAL      {1}
    ::= { alaIPv6InterfaceEntry 12 }

alaIPv6InterfaceName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (1..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The mandatory user-assigned name for the interface.

        Since the loopback interface is created without user
        interaction, the name 'loopback' will be automatically
        assigned."
    ::= { alaIPv6InterfaceEntry 13 }

alaIPv6InterfaceAdvSendMtu OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "The TRUE/FALSE value that determines whether the MTU
        option is sent in Router Advertisements."
    DEFVAL  { false }
    ::= { alaIPv6InterfaceEntry 14 }

alaIPv6InterfaceReachableTime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "In the absence of any reachability notification, the
        amount of time a neighbor reached via this interface
        will remain in the reachable state before transitioning
        to the stale state.  Computed to be between .5 and 1.5
        times the alaIPv6InterfaceBaseReachableTime."
    ::= { alaIPv6InterfaceEntry 15 }

alaIPv6InterfaceBaseReachableTime OBJECT-TYPE
    SYNTAX      Unsigned32 (10..3600)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The base value used to compute the reachable time
        for neighbors reached via this interface.  See
        alaIPv6InterfaceReachableTime above."
    ::= { alaIPv6InterfaceEntry 16 }

alaIPv6InterfaceMinRtrAdvInterval OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1350)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The minimum time allowed between sending unsolicited
        multicast router advertisements from the interface.

        The time must be a minimum of 3 seconds and no more than
        .75 times the value of alaIPv6InterfaceMaxRtrAdvInterval.

        Setting this object to the special value of 0 indicates
        that the minimum interval should be automatically
        recalculated using the formula .33 times the value of
        alaIPv6InterfaceMaxRtrAdvInterval."
    DEFVAL      {0}
    ::= { alaIPv6InterfaceEntry 17 }

alaIPv6InterfaceClockSkew OBJECT-TYPE
    SYNTAX           Unsigned32 (0..3600)
    UNITS        "seconds"
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
    "Router Advertisement decrementing timers must be consistent
     in all Advertisements on the link. The clock skew accounts
     for link propogation delays and poorly synchronized clocks."
    DEFVAL { 600 }
    ::= { alaIPv6InterfaceEntry 18 }

alaIPv6InterfaceRetransTimer OBJECT-TYPE
    SYNTAX       Unsigned32 (1000..30000)
    UNITS        "milliseconds"
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
    "The amount of time to wait before retransmitting a Neighbor
     Solicitation during neighbor discovery."
    DEFVAL { 1000 }
    ::= { alaIPv6InterfaceEntry 19 }

alaIPv6InterfaceDADTransmits OBJECT-TYPE
    SYNTAX       Unsigned32 (0..10)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
    "The number of Neighbor Solicitations to send during Duplicate
     Address Detection.

     A value of 0 indicates that DAD will not be performed for
     addresses assigned to the interface."
    DEFVAL { 1 }
    ::= { alaIPv6InterfaceEntry 20 }

alaIPv6InterfaceAdvHopLimit OBJECT-TYPE
    SYNTAX       Unsigned32 (0..255)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
    "The value placed in the current hop limit field of router
    advertisements."
    DEFVAL { 64 }
    ::= { alaIPv6InterfaceEntry 21 }

alaIPv6InterfaceLPND OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable/disable local proxy neighbor discovery."
    ::= { alaIPv6InterfaceEntry 22 }

alaIPv6InterfaceRAFilter OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-create
    STATUS      deprecated
    DESCRIPTION
        "Enable/disable RA filtering.

	 This object has been superseded by the 
	 alaIPv6RAFilterInterfaceTable."
    ::= { alaIPv6InterfaceEntry 23 }

alaIPv6InterfaceNeighborLimit OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum number o neighbor entries that may be cached
	on this interface.  A value of 0 indicates that no limit
	is set.  The minimum value is 10."
    DEFVAL      {0}
    ::= { alaIPv6InterfaceEntry 24 }

alaIPv6InterfaceRetransBackoff OBJECT-TYPE
    SYNTAX       Unsigned32 (1..3)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
    "The neighbor unreachability detection exponential backoff base.
    A value of 1 indicates the use of fixed interval retransmissions."
    DEFVAL { 1 }
    ::= { alaIPv6InterfaceEntry 25 }

alaIPv6InterfaceRetransMax OBJECT-TYPE
    SYNTAX       Unsigned32 (1..10)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
    "The maximum number of neighbor solicitations to be sent during 
    neighbor discovery or neighbor unreachability detection."
    DEFVAL { 3 }
    ::= { alaIPv6InterfaceEntry 26 }

alaIPv6InterfaceRouterPreference OBJECT-TYPE
    SYNTAX      INTEGER {
                    medium(0),
                    high(1),
                    low(3)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The preference a host should give to using this router
	as a default router."
    ::= { alaIPv6InterfaceEntry 27 }


--
-- Alcatel IPv6 Tunnel Configuration
--

alaIPv6TunnelConfig OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBObjects 3 }

alaIPv6ConfigTunnelTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6ConfigTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for IPv6 configured tunnels.  This table contains the
         tunnel-specific information extending the corresponding
         tunnel interface entry in alaIPv6InterfaceTable."
    ::= { alaIPv6TunnelConfig 2 }

alaIPv6ConfigTunnelEntry OBJECT-TYPE
    SYNTAX      AlaIPv6ConfigTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A entry contains the objects for an IPv6 configured tunnel."
    INDEX       { ipv6IfIndex }
    ::= { alaIPv6ConfigTunnelTable 1 }

AlaIPv6ConfigTunnelEntry ::= SEQUENCE {
    alaIPv6ConfigTunnelV4Source         IpAddress,
    alaIPv6ConfigTunnelV4Dest           IpAddress
}

alaIPv6ConfigTunnelV4Source OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The source IPv4 address for the tunnel."
    ::= { alaIPv6ConfigTunnelEntry 1 }

alaIPv6ConfigTunnelV4Dest OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The destination IPv4 address for the tunnel."
    ::= { alaIPv6ConfigTunnelEntry 2 }


--
-- Alcatel IPv6 Interface Address Table
--

alaIPv6InterfaceAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6InterfaceAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table allowing the creation and removal of IPv6
        addresses assigned to interfaces."
    ::= { alcatelIND1IPv6MIBObjects 4 }

alaIPv6InterfaceAddressEntry OBJECT-TYPE
    SYNTAX      AlaIPv6InterfaceAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An IPv6 interface address entry.

        The same link-local address may be assigned to
        multiple interfaces.  A global address may only
        be assigned to a single interface."
    INDEX       { ipv6IfIndex, alaIPv6InterfaceAddress }
    ::= { alaIPv6InterfaceAddressTable 1 }

AlaIPv6InterfaceAddressEntry ::= SEQUENCE {
    alaIPv6InterfaceAddressRowStatus    RowStatus,
    alaIPv6InterfaceAddress             Ipv6Address,
    alaIPv6InterfaceAddressPrefixLength Unsigned32,
    alaIPv6InterfaceAddressAnycastFlag  TruthValue,
    alaIPv6InterfaceAddressDADStatus    INTEGER
}

alaIPv6InterfaceAddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Used to control the addition and removal of IPv6
        interface addresses."
    ::= { alaIPv6InterfaceAddressEntry 1 }

alaIPv6InterfaceAddress OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An IPv6 address (or prefix for EUI-64 addresses)
        assigned to the interface."
    ::= { alaIPv6InterfaceAddressEntry 2 }

alaIPv6InterfaceAddressPrefixLength OBJECT-TYPE
    SYNTAX      Unsigned32 (3..128)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The number of bits that are significant in the IPv6
        address' prefix."
    ::= { alaIPv6InterfaceAddressEntry 3 }

alaIPv6InterfaceAddressAnycastFlag OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object has the value 'true(1)', if this
         address is an anycast address and the value
         'false(2)' otherwise."
    DEFVAL { false }
    ::= { alaIPv6InterfaceAddressEntry 4 }

alaIPv6InterfaceAddressDADStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    unknown(0),
                    pending(1),
                    duplicate(2),
                    passed(3),
                    check(4)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of duplicate address detection for this address.
        The only value that may be set via SNMP is 'check' when the
        current status is 'duplicate'.  In such cases, duplicate
        address detection will be performed again for the address."
    ::= { alaIPv6InterfaceAddressEntry 5 }


--
-- Alcatel IPv6 EUI64 Interface Address Table
--

alaIPv6InterfaceEUI64AddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6InterfaceEUI64AddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table allowing the creation and removal of IPv6
        addresses formed by appending an EUI-64 interface
        identifier to the specified prefix.

        This table is mainly used for the creation of such
        addresses.  After creation they can be managed
        via the alaIPv6InterfaceAddressTable."
    ::= { alcatelIND1IPv6MIBObjects 5 }

alaIPv6InterfaceEUI64AddressEntry OBJECT-TYPE
    SYNTAX      AlaIPv6InterfaceEUI64AddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An IPv6 interface EUI-64 address entry."
    INDEX       { ipv6IfIndex,
                  alaIPv6InterfaceEUI64AddressPrefix }
    ::= { alaIPv6InterfaceEUI64AddressTable 1 }

AlaIPv6InterfaceEUI64AddressEntry ::= SEQUENCE {
    alaIPv6InterfaceEUI64AddressRowStatus       RowStatus,
    alaIPv6InterfaceEUI64AddressPrefix          AlaIPv6AddressPrefix,
    alaIPv6InterfaceEUI64AddressPrefixLength    Unsigned32,
    alaIPv6InterfaceEUI64AddressIdentifier      OCTET STRING
}

alaIPv6InterfaceEUI64AddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Used to control the addition and removal of IPv6
        interface EUI-64 addresses."
    ::= { alaIPv6InterfaceEUI64AddressEntry 1 }

alaIPv6InterfaceEUI64AddressPrefix OBJECT-TYPE
    SYNTAX      AlaIPv6AddressPrefix
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The prefix for the EUI-64 address."
    ::= { alaIPv6InterfaceEUI64AddressEntry 2 }

alaIPv6InterfaceEUI64AddressPrefixLength OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The number of bits that are significant in the IPv6
        address' prefix.  The prefix length must be in the 
	range 3..64 or 128."
    ::= { alaIPv6InterfaceEUI64AddressEntry 3 }

alaIPv6InterfaceEUI64AddressIdentifier OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interface's EUI-64 identifier which is combined
         with the prefix to form the IPv6 address."
    ::= { alaIPv6InterfaceEUI64AddressEntry 4 }


--
-- Alcatel IPv6 Neighbor Table.
--

alaIPv6NeighborTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6NeighborEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IPv6 neighbor table.  Much of this information is
        available in the RFC-2465 ipv6NetToMediaTable.  However,
        that table does not allow the static configuration of
        neighbor entries (all objects except for
        ipv6NetToMediaValid are read-only)."
    ::= { alcatelIND1IPv6MIBObjects 6 }

alaIPv6NeighborEntry OBJECT-TYPE
    SYNTAX      AlaIPv6NeighborEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains one IPv6 address to `physical'
        address equivalence (a neighbor)."
    INDEX       { ipv6IfIndex, alaIPv6NeighborNetAddress }
    ::= { alaIPv6NeighborTable 1 }

AlaIPv6NeighborEntry ::= SEQUENCE {
    alaIPv6NeighborNetAddress   Ipv6Address,
    alaIPv6NeighborPhysAddress  PhysAddress,
    alaIPv6NeighborSlot         Unsigned32,
    alaIPv6NeighborPort         Unsigned32,
    alaIPv6NeighborType         INTEGER,
    alaIPv6NeighborState        INTEGER,
    alaIPv6NeighborLastUpdated  TimeStamp,
    alaIPv6NeighborRowStatus    RowStatus,
    alaIPv6NeighborLifetime     Unsigned32,
    alaIPv6NeighborReachability INTEGER,
    alaIPv6NeighborChassis      Unsigned32,
    alaIPv6NeighborPortIfIndex	Unsigned32
}

alaIPv6NeighborNetAddress OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The neighbor's IPv6 Address."
    ::= { alaIPv6NeighborEntry 1 }

alaIPv6NeighborPhysAddress OBJECT-TYPE
    SYNTAX      PhysAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The neighbor's media-dependent `physical' address."
    ::= { alaIPv6NeighborEntry 2 }

alaIPv6NeighborSlot OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      deprecated
    DESCRIPTION
        "The slot used to reach the neighbor.  When creating a static neighbor
         the slot must be specified.  On read, a value of zero indicates
         the slot is not known/not applicable.

	 Superseded by alaIPv6NeighborPortIfIndex"
    ::= { alaIPv6NeighborEntry 3 }

alaIPv6NeighborPort OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      deprecated
    DESCRIPTION
        "The port used to reach the neighbor.  When creating a static neighbor
         the port must be specified.  On read, a value of zero indicates the
         port is not known/not applicable.

	 Superseded by alaIPv6NeighborPortIfIndex."
    ::= { alaIPv6NeighborEntry 4 }

alaIPv6NeighborType OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),    -- none of the following
                    dynamic(2),  -- dynamically resolved
                    static(3),   -- statically configured
                    local(4)     -- local interface
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The type of the mapping. The 'dynamic(2)' type
        indicates that the IPv6 address to physical
        addresses mapping has been dynamically
        resolved using the IPv6 Neighbor Discovery
        protocol. The static(3)' types indicates that
        the mapping has been statically configured.
        The local(4) indicates that the mapping is
        provided for an entity's own interface address.

        All entries added via this table will have the
        type static(3) and only static entries may be
        removed via this table."
    ::= { alaIPv6NeighborEntry 5 }

alaIPv6NeighborState OBJECT-TYPE
    SYNTAX      INTEGER {
                    reachable(1), -- confirmed reachability
                    stale(2),     -- unconfirmed reachability
                    delay(3),     -- waiting for reachability
                                  -- confirmation before entering
                                  -- the probe state
                    probe(4),     -- actively probing
                    invalid(5),   -- an invalidated mapping
                    unknown(6)    -- state can not be determined
                                  -- for some reason.
                }
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
        "The Neighbor Unreachability Detection state
        for the interface when the address mapping in
        this entry is used."
    ::= { alaIPv6NeighborEntry 6 }

alaIPv6NeighborLastUpdated OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime at the time this entry
        was last updated.  If this entry was updated prior
        to the last re-initialization of the local network
        management subsystem, then this object contains
        a zero value."
    ::= { alaIPv6NeighborEntry 7 }

alaIPv6NeighborRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Used to control the addition and removal of static
        entries in the neighbor table."
    ::= { alaIPv6NeighborEntry 8 }

alaIPv6NeighborLifetime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The remaining time the neighbor will stay in its current
        state.  External events may cause a state change before
        the expiry of this lifetime.  A value of zero indicates
        the neighbor will remain in its current state indefinitely."
    ::= { alaIPv6NeighborEntry 9 }

alaIPv6NeighborReachability OBJECT-TYPE
    SYNTAX      INTEGER {
                    confirmed(1),    -- confirmed reachability
                    unconfirmed(2),  -- unconfirmed reachability
                    incomplete(3)    -- detection incomplete
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The reachability status of the neighbor."
    ::= { alaIPv6NeighborEntry 10 }

alaIPv6NeighborChassis OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      deprecated
    DESCRIPTION
        "On a multi-chasis system, the chassis used to reach the neighbor.
	On a single-chassis system this value is always 0.  On read, a
	value of zero may indicate that the chassis is not known/not 
	applicable.

	Superseded by alaIPv6NeighborPortIfIndex."
    DEFVAL      { 0 }
    ::= { alaIPv6NeighborEntry 11 }

alaIPv6NeighborPortIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The ifIndex of the physical port or link aggregation used to reach 
	the neighbor.  When creating a static neighbor the port ifIndex must 
	be specified.  On read, a value of zero indicates the port ifIndex 
	is not known/not applicable."
    ::= { alaIPv6NeighborEntry 12 }

--
-- Alcatel IPv6 Static Routes Table
--

alaIPv6StaticRouteTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6StaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "This table has been superseded by alaIprmV6StaticRouteTable in
        ALCATEL-IND1-IPRMV6-MIB.

        Table allowing the creation and removal of static
        IPv6 routes."
    ::= { alcatelIND1IPv6MIBObjects 7 }

alaIPv6StaticRouteEntry OBJECT-TYPE
    SYNTAX      AlaIPv6StaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A static route entry."
    INDEX       { alaIPv6StaticRouteDest,
                  alaIPv6StaticRoutePfxLength }
    ::= { alaIPv6StaticRouteTable 1 }

AlaIPv6StaticRouteEntry ::= SEQUENCE {
    alaIPv6StaticRouteDest      Ipv6Address,
    alaIPv6StaticRoutePfxLength Integer32,
    alaIPv6StaticRouteIfIndex   Ipv6IfIndexOrZero,
    alaIPv6StaticRouteNextHop   Ipv6Address,
    alaIPv6StaticRouteMetric    Unsigned32,
    alaIPv6StaticRouteRowStatus RowStatus
}

alaIPv6StaticRouteDest OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The destination IPv6 address of this static
        route.  This object may not take a Multicast
        address value."
    ::= { alaIPv6StaticRouteEntry 1 }

alaIPv6StaticRoutePfxLength OBJECT-TYPE
    SYNTAX      Integer32 (0..128)
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Indicates the prefix length of the destination
        address."
    ::= { alaIPv6StaticRouteEntry 2 }

alaIPv6StaticRouteIfIndex OBJECT-TYPE
    SYNTAX      Ipv6IfIndexOrZero
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "If the next hop address is a link-local
        address, this is the ipv6IfIndex value of the
        interface over which the destination is reached.
        For all other next hop address types the value
        is zero."
    DEFVAL      { 0 }
    ::= { alaIPv6StaticRouteEntry 3 }

alaIPv6StaticRouteNextHop OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The IPv6 address of the next hop towards the
        destination."
    ::= { alaIPv6StaticRouteEntry 4 }

alaIPv6StaticRouteMetric OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The routing metric for this route. The lower the
        value, the higher the priority for the static
        route."
    DEFVAL      { 1 }
    ::= { alaIPv6StaticRouteEntry 5 }

alaIPv6StaticRouteRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "Used to control the addition and removal of static
        routes."
    ::= { alaIPv6StaticRouteEntry 6 }


--
-- Local host name to IPv6 address table
--

alaIPv6HostTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6HostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Local table mapping host names to IPv6 addresses. This provides
        the equivalent of /etc/hosts for IPv6."
    ::= { alcatelIND1IPv6MIBObjects 8 }

alaIPv6HostEntry OBJECT-TYPE
    SYNTAX      AlaIPv6HostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A entry maps a host name to an IPv6 address."
    INDEX       { alaIPv6HostName, alaIPv6HostAddress }
    ::= { alaIPv6HostTable 1 }

AlaIPv6HostEntry ::= SEQUENCE {
    alaIPv6HostName             SnmpAdminString,
    alaIPv6HostAddress          Ipv6Address,
    alaIPv6HostRowStatus        RowStatus
}

alaIPv6HostName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(1..64))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A host name to be mapped to an IPv6 address."
    ::= { alaIPv6HostEntry 1 }

alaIPv6HostAddress OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IPv6 address mapped to the host name."
    ::= { alaIPv6HostEntry 2 }

alaIPv6HostRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Allows host name/IPv6 address mappings to be created and
        deleted in this table."
    ::= { alaIPv6HostEntry 3 }


--
-- Alcatel IPv6 Interface Prefix Table for Router Advertisements
--

alaIPv6InterfacePrefixTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6InterfacePrefixEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table allowing the creation and removal of IPv6
        prefixes to be placed in Prefix Information
        options in Router Advertisement messages sent
        from the interface.

        Default: all prefixes that the router advertises
        via routing protocols as being on-link for the
        interface from which the advertisement is sent.
        The link-local prefix is not included in the
        list of advertised prefixes."
    ::= { alcatelIND1IPv6MIBObjects 9 }


alaIPv6InterfacePrefixEntry OBJECT-TYPE
    SYNTAX      AlaIPv6InterfacePrefixEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An IPv6 interface prefix entry."
    INDEX { ipv6IfIndex, alaIPv6InterfacePrefix,
        alaIPv6InterfacePrefixLength }
    ::= { alaIPv6InterfacePrefixTable 1 }


AlaIPv6InterfacePrefixEntry ::= SEQUENCE {
    alaIPv6InterfacePrefixRowStatus                    RowStatus,
    alaIPv6InterfacePrefix                             Ipv6Address,
    alaIPv6InterfacePrefixLength                       Unsigned32,
    alaIPv6InterfacePrefixValidLifetime                Unsigned32,
    alaIPv6InterfacePrefixOnLinkFlag                   TruthValue,
    alaIPv6InterfacePrefixPreferredLifetime            Unsigned32,
    alaIPv6InterfacePrefixAutonomousFlag               TruthValue,
    alaIPv6InterfacePrefixSource                       INTEGER,
    alaIPv6InterfacePrefixValidLifetimeDecrement       TruthValue,
    alaIPv6InterfacePrefixValidLifetimeExpire          DateAndTime,
    alaIPv6InterfacePrefixPreferredLifetimeDecrement   TruthValue,
    alaIPv6InterfacePrefixPreferredLifetimeExpire      DateAndTime
}


alaIPv6InterfacePrefixRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Used to control the addition and removal of IPv6
        interface prefixes for Router ADvertisement messages."
    ::= { alaIPv6InterfacePrefixEntry 1 }


alaIPv6InterfacePrefix OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The prefix associated with this interface."
    ::= { alaIPv6InterfacePrefixEntry 2 }


alaIPv6InterfacePrefixLength OBJECT-TYPE
    SYNTAX      Unsigned32 (1..127)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The length of the prefix in bits."
    ::= { alaIPv6InterfacePrefixEntry 3 }


alaIPv6InterfacePrefixValidLifetime OBJECT-TYPE
    SYNTAX       Unsigned32
    UNITS        "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value to be placed in the Valid
        Lifetime in the Prefix Information
        option, in seconds. The designated value
        of 4,294,967,295 represents infinity."
    DEFVAL { 2592000 }
    ::= { alaIPv6InterfacePrefixEntry 4 }


alaIPv6InterfacePrefixOnLinkFlag OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value to be placed in the on-link
        flag (L-bit) field in the Prefix
        Information option."
    DEFVAL { true }
    ::= { alaIPv6InterfacePrefixEntry 5 }


alaIPv6InterfacePrefixPreferredLifetime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value to be placed in the Preferred
        Lifetime in the Prefix Information
        option, in seconds. The designated value
        of 4,294,967,295 represents infinity."
    DEFVAL { 604800 }
    ::= { alaIPv6InterfacePrefixEntry 6 }


alaIPv6InterfacePrefixAutonomousFlag OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value to be placed in the Autonomous
        Flag field in the Prefix Information
        option."
    DEFVAL { true }
    ::= { alaIPv6InterfacePrefixEntry 7 }


alaIPv6InterfacePrefixSource OBJECT-TYPE
    SYNTAX      INTEGER {
                   other(1),
                   dynamic(2),
                   configured(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The source of this prefix. If configured by
        management the value will be configured(3). If
        determined automatically from IPv6 interface
        address configuration the value will be
        dynamic(2)."
    ::= { alaIPv6InterfacePrefixEntry 8 }


alaIPv6InterfacePrefixValidLifetimeDecrement OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "If true, use the remaining seconds derived from
        alaIPv6InterfacePrefixValidLifetime in the
        Router Advertisement. If false, use the static value
        alaIPv6InterfacePrefixValidLifetime."
    DEFVAL { false }
    ::= { alaIPv6InterfacePrefixEntry 9 }


alaIPv6InterfacePrefixValidLifetimeExpire OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "The date and time when the advertised prefix Valid Lifetime
     expires. To use this value,
     alaIPv6InterfaceValidLifetimeDecrement must be set to true."
    ::= { alaIPv6InterfacePrefixEntry 10 }


alaIPv6InterfacePrefixPreferredLifetimeDecrement OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "If true, use the remaining seconds derived from
        alaIPv6InterfacePrefixPreferredLifetime in the
        Router Advertisement. If false, use the static value
        alaIPv6InterfacePrefixPreferredLifetime."
    DEFVAL { false }
    ::= { alaIPv6InterfacePrefixEntry 11 }


alaIPv6InterfacePrefixPreferredLifetimeExpire OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "The date and time when the advertised prefix Preferred Lifetime
     expires. To use this value,
     alaIPv6InterfacePreferredLifetimeDecrement must be set to true."
    ::= { alaIPv6InterfacePrefixEntry 12 }


--
-- Alcatel IPv6 path MTU table
--

alaIPv6PMTUTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6PMTUEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table allowing the retrieval of the known IPv6
         path MTU value."
    ::= { alcatelIND1IPv6MIBObjects 10 }

alaIPv6PMTUEntry OBJECT-TYPE
    SYNTAX      AlaIPv6PMTUEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An IPv6 path MTU entry."
    INDEX       { alaIPv6PMTUDest }
    ::= { alaIPv6PMTUTable 1 }

AlaIPv6PMTUEntry ::= SEQUENCE {
    alaIPv6PMTUDest             Ipv6Address,
    alaIPv6PMTU                 Unsigned32,
    alaIPv6PMTUExpire           Unsigned32,
    alaIPv6PMTUHits             Counter32,
    alaIPv6PMTUUpdates          Counter32
}

alaIPv6PMTUDest OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The destination address of the IPv6 path."
    ::= { alaIPv6PMTUEntry 1 }

alaIPv6PMTU OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The path's MTU."
    ::= { alaIPv6PMTUEntry 2 }

alaIPv6PMTUExpire OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "minutes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum time remaining before the PMTU entry is
        removed from the table."
    ::= { alaIPv6PMTUEntry 3 }

alaIPv6PMTUHits OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times the path MTU entry has been used."
    ::= { alaIPv6PMTUEntry 4 }

alaIPv6PMTUUpdates OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times the path MTU entry has been updated."
    ::= { alaIPv6PMTUEntry 5 }


--
-- Alcatel IPv6 route flags table
--

alaIPv6RouteFlagsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6RouteFlagsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table allowing the retrieval of the flags for
        IPv6 route entries."
    ::= { alcatelIND1IPv6MIBObjects 11 }

alaIPv6RouteFlagsEntry OBJECT-TYPE
    SYNTAX      AlaIPv6RouteFlagsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An IPV6 route flags entry."
    AUGMENTS   { ipv6RouteEntry }
    ::= { alaIPv6RouteFlagsTable 1 }

AlaIPv6RouteFlagsEntry ::= SEQUENCE {
    alaIPv6RouteFlagsUp         TruthValue,
    alaIPv6RouteFlagsGateway    TruthValue,
    alaIPv6RouteFlagsHost       TruthValue,
    alaIPv6RouteFlagsStatic     TruthValue,
    alaIPv6RouteFlagsCloneable  TruthValue,
    alaIPv6RouteFlagsDiscard    TruthValue,
    alaIPv6RouteFlagsECMP       TruthValue,
    alaIPv6RouteFlagsTransient  TruthValue
}

alaIPv6RouteFlagsUp OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if the Up (U) flag is set on the route."
    ::= { alaIPv6RouteFlagsEntry 1 }

alaIPv6RouteFlagsGateway OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if the Gateway (G) flag is set on the route."
    ::= { alaIPv6RouteFlagsEntry 2 }

alaIPv6RouteFlagsHost OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if the Host (H) flag is set on the route."
    ::= { alaIPv6RouteFlagsEntry 3 }

alaIPv6RouteFlagsStatic OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if the Static (S) flag is set on the route."
    ::= { alaIPv6RouteFlagsEntry 4 }

alaIPv6RouteFlagsCloneable OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if the Cloneable (C) flag is set on the route."
    ::= { alaIPv6RouteFlagsEntry 5 }

alaIPv6RouteFlagsDiscard OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if the Discard/Blackhole (B) flag is set on the route."
    ::= { alaIPv6RouteFlagsEntry 6 }

alaIPv6RouteFlagsECMP OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if the ECMP (E) flag is set on the route."
    ::= { alaIPv6RouteFlagsEntry 7 }

alaIPv6RouteFlagsTransient OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "True if route has not been replaced by valid route after takeover."
    ::= { alaIPv6RouteFlagsEntry 8 }


--
-- Alcatel IPv6 Local Unicast Address Table
--

alaIPv6LocalUnicastTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6LocalUnicastEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "Table allowing the creation and removal of local IPv6
      unicast addresses (RFC 4193) on an interface."
    ::= { alcatelIND1IPv6MIBObjects 13 }

alaIPv6LocalUnicastEntry OBJECT-TYPE
    SYNTAX      AlaIPv6LocalUnicastEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "An local unicast IPv6 address entry."
    INDEX       { ipv6IfIndex,
                  alaIPv6LocalUnicastGlobalID,
                  alaIPv6LocalUnicastSubnetID,
                  alaIPv6LocalUnicastInterfaceID }
    ::= { alaIPv6LocalUnicastTable 1 }

AlaIPv6LocalUnicastEntry ::= SEQUENCE {
    alaIPv6LocalUnicastGlobalID     OCTET STRING,
    alaIPv6LocalUnicastSubnetID     OCTET STRING,
    alaIPv6LocalUnicastInterfaceID  OCTET STRING,
    alaIPv6LocalUnicastPrefixLength Unsigned32,
    alaIPv6LocalUnicastEUI64        TruthValue,
    alaIPv6LocalUnicastRowStatus    RowStatus
}

alaIPv6LocalUnicastGlobalID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(5))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "The global ID portion of the local IPv6 unicast address.  Leave
      the value as all zero when adding a new addres to use the
      alaIPv6GlobalID value."
    ::= { alaIPv6LocalUnicastEntry 1 }

alaIPv6LocalUnicastSubnetID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(2))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "The subnet ID portion of the local IPv6 unicast address."
    ::= { alaIPv6LocalUnicastEntry 2 }

alaIPv6LocalUnicastInterfaceID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(8))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "The interface identifier portion of the local IPv6 unicast
      address.  When alaIPv6LocalUnicastEUI64 is true(1) the value
      of this object should be all zero."
    ::= { alaIPv6LocalUnicastEntry 3 }

alaIPv6LocalUnicastPrefixLength OBJECT-TYPE
    SYNTAX      Unsigned32 (64..128)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
      "The number of bits that are significant in the IPv6
      address prefix."
    DEFVAL { 64 }
    ::= { alaIPv6LocalUnicastEntry 4 }

alaIPv6LocalUnicastEUI64 OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
      "If true(1) the interface identifier is formed from an
      automatically generated EUI-64 value."
    DEFVAL { false }
    ::= { alaIPv6LocalUnicastEntry 5 }

alaIPv6LocalUnicastRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
      "Used to control the addition and removal of local IPv6
      unicast addresses."
    ::= { alaIPv6LocalUnicastEntry 6 }

--
-- alaIPv6RAFilterTrustedTable { alcatelIND1IPv6MIBObjects 14 } obsolete and removed
--

--
-- Alcatel IPv6 RA Filtering Trusted Ports Table - deprecated
--

alaIPv6RAFilterTrustedPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6RAFilterTrustedPortEntry
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
      "Table allowing the creation and removal of trusted ports
      for an interface's RA filtering.

      This table has been superseded by the 
      alaIPv6RAFilterTrustedSourceTable"
    ::= { alcatelIND1IPv6MIBObjects 15 }

alaIPv6RAFilterTrustedPortEntry OBJECT-TYPE
    SYNTAX      AlaIPv6RAFilterTrustedPortEntry
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
      "An RA filter trusted port entry."
    INDEX       { ipv6IfIndex,
                  alaIPv6RAFilterTrustedPortIfIndex }
    ::= { alaIPv6RAFilterTrustedPortTable 1 }

AlaIPv6RAFilterTrustedPortEntry ::= SEQUENCE {
    alaIPv6RAFilterTrustedPortIfIndex   Unsigned32,
    alaIPv6RAFilterTrustedPortRowStatus RowStatus
}

alaIPv6RAFilterTrustedPortIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
        "The ifIndex of a trusted physical port or link aggregation."
    ::= { alaIPv6RAFilterTrustedPortEntry 1 }

alaIPv6RAFilterTrustedPortRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      deprecated
    DESCRIPTION
        "Used to control the addition and removal of an RA filter's
         trusted ports."
    ::= { alaIPv6RAFilterTrustedPortEntry 2 }


--
-- Alcatel IPv6 RA Filtering Interface Table
--

alaIPv6RAFilterInterfaceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6RAFilterInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "Table to control operation of RA Filtering on a VLAN."
    ::= { alcatelIND1IPv6MIBObjects 16 }

alaIPv6RAFilterInterfaceEntry OBJECT-TYPE
    SYNTAX      AlaIPv6RAFilterInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "An RA filter interface entry."
    INDEX       { alaIPv6RAFilterInterfaceVlan }
    ::= { alaIPv6RAFilterInterfaceTable 1 }

AlaIPv6RAFilterInterfaceEntry ::= SEQUENCE {
    alaIPv6RAFilterInterfaceVlan        Unsigned32,
    alaIPv6RAFilterInterfaceAdminStatus INTEGER,
    alaIPv6RAFilterInterfaceRowStatus   RowStatus
}

alaIPv6RAFilterInterfaceVlan OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ID of the VLAN on which RA Filtering is to be configured."
    ::= { alaIPv6RAFilterInterfaceEntry 1 }

alaIPv6RAFilterInterfaceAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "RA filtering administrative status."
    DEFVAL { enable }
    ::= { alaIPv6RAFilterInterfaceEntry 2 }

alaIPv6RAFilterInterfaceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Used to control the addition and removal of an interface's
         RA filter configuration."
    ::= { alaIPv6RAFilterInterfaceEntry 3 }


--
-- Alcatel IPv6 RA Filtering Trusted Source Table
--

alaIPv6RAFilterTrustedSourceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaIPv6RAFilterTrustedSourceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "Table allowing the creation and removal of trusted sources
      for a VLAN's RA filtering."
    ::= { alcatelIND1IPv6MIBObjects 17 }

alaIPv6RAFilterTrustedSourceEntry OBJECT-TYPE
    SYNTAX      AlaIPv6RAFilterTrustedSourceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "An RA filter trusted source entry."
    INDEX       { alaIPv6RAFilterInterfaceVlan,
                  alaIPv6RAFilterTrustedSourceType,
		  alaIPv6RAFilterTrustedSourceValue }
    ::= { alaIPv6RAFilterTrustedSourceTable 1 }

AlaIPv6RAFilterTrustedSourceEntry ::= SEQUENCE {
    alaIPv6RAFilterTrustedSourceType        AlaIPv6RAFilterTrustedSourceType,
    alaIPv6RAFilterTrustedSourceValue       AlaIPv6RAFilterTrustedSourceValue,
    alaIPv6RAFilterTrustedSourceRowStatus   RowStatus
}

alaIPv6RAFilterTrustedSourceType OBJECT-TYPE
    SYNTAX      AlaIPv6RAFilterTrustedSourceType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The type of the trusted source selector."
    ::= { alaIPv6RAFilterTrustedSourceEntry 1 }

alaIPv6RAFilterTrustedSourceValue OBJECT-TYPE
    SYNTAX      AlaIPv6RAFilterTrustedSourceValue
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The trusted source selector's value."
    ::= { alaIPv6RAFilterTrustedSourceEntry 2 }

alaIPv6RAFilterTrustedSourceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Used to control the addition and removal of a trusted source entry."
    ::= { alaIPv6RAFilterTrustedSourceEntry 3 }


--
-- IPv6 Traps
--

ndpMaxLimitReached NOTIFICATION-TYPE
     STATUS             deprecated
     DESCRIPTION
           " This notification is generated when hardware table has reached supported
             Maximum entries. OS6400 will not generate new ARP request for new nexthops"
::= {alcatelIND1IPv6MIBNotifications 1}

alaIPv6NeighborLimitExceeded NOTIFICATION-TYPE
    OBJECTS     { alaIPv6NeighborLimit }
    STATUS      current
    DESCRIPTION
        "Notification that the system-wide neighbor cache limit
        has been exceeded."
::= {alcatelIND1IPv6MIBNotifications 2}

alaIPv6NeighborVRFLimitExceeded NOTIFICATION-TYPE
    OBJECTS     { 
                  alaVirtualRouterName,
                  alaIPv6NeighborVRFLimit 
                }
    STATUS      current
    DESCRIPTION
        "Notification that a per-VRF neighbor cache limit
        has been exceeded."
::= {alcatelIND1IPv6MIBNotifications 3}

alaIPv6InterfaceNeighborLimitExceeded NOTIFICATION-TYPE
    OBJECTS     { 
                  ipv6IfIndex,
                  alaIPv6InterfaceNeighborLimit 
                }
    STATUS      current
    DESCRIPTION
        "Notification that a per-interface neighbor cache limit
        has been exceeded."
::= {alcatelIND1IPv6MIBNotifications 4}



--
-- conformance information
--

alcatelIND1IPv6MIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIB 2 }
alcatelIND1IPv6MIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBConformance 1 }
alcatelIND1IPv6MIBGroups OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBConformance 2 }

alaIPv6Compliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
        "The compliance statement for switches with Alcatel IPv6 stack and
        implementing ALCATEL-IND1-IPV6-MIB."
    MODULE
    MANDATORY-GROUPS { alaIPv6TunnelConfigGroup,
                       alaIPv6ConfigGroup,
                       alaIPv6NeighborGroup,
                       alaIPv6InterfaceGroup,
                       alaIPv6InterfaceAddressGroup,
                       alaIPv6InterfaceEUI64AddressGroup,
                       alaIPv6InterfacePrefixGroup,
                       alaIPv6PMTUGroup,
                       alaIPv6RouteFlagsGroup,
                       alaIPv6LocalUnicastGroup,
		       alaIPv6RAFilterGroup
                    }
    ::= { alcatelIND1IPv6MIBCompliances 1 }


--
-- units of conformance
--

alaIPv6TunnelConfigGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6ConfigTunnelV4Source,
                  alaIPv6ConfigTunnelV4Dest
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of Alcatel IPv6
        tunneling."
    ::= { alcatelIND1IPv6MIBGroups 1 }

alaIPv6ConfigGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6ClearNeighbors,
                  alaIPv6ClearTraffic,
                  alaIPv6ClearPMTUTable,
                  alaIPv6PMTUMinLifetime,
                  alaIPv6NeighborStaleLifetime,
                  alaIPv6GlobalID,
	          alaIPv6VirtualSourceMAC,
	          alaIPv6NeighborLimit,
		  alaIPv6NeighborVRFLimit
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of configuration
        parameters of Alcatel IPv6 stack."
    ::= { alcatelIND1IPv6MIBGroups 2 }

alaIPv6NeighborGroup OBJECT-GROUP
    OBJECTS     {
                  -- alaIPv6NeighborNetAddress,
                  alaIPv6NeighborPhysAddress,
                  -- alaIPv6NeighborSlot,
                  -- alaIPv6NeighborPort,
                  alaIPv6NeighborType,
                  -- alaIPv6NeighborState,
                  alaIPv6NeighborLastUpdated,
                  alaIPv6NeighborRowStatus,
                  alaIPv6NeighborLifetime,
                  alaIPv6NeighborReachability,
		  -- alaIPv6NeighborChassis,
		  alaIPv6NeighborPortIfIndex
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        neighbors."
    ::= { alcatelIND1IPv6MIBGroups 3 }

alaIPv6StaticRouteGroup OBJECT-GROUP
    OBJECTS     {
                  -- alaIPv6StaticRouteDest,
                  -- alaIPv6StaticRoutePfxLength,
                  alaIPv6StaticRouteIfIndex,
                  alaIPv6StaticRouteNextHop,
                  alaIPv6StaticRouteMetric,
                  alaIPv6StaticRouteRowStatus
                }
    STATUS     obsolete
    DESCRIPTION
        "A collection of objects to support management of IPv6
        static routes."
    ::= { alcatelIND1IPv6MIBGroups 4 }

alaIPv6InterfaceGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6InterfaceRowStatus,
                  alaIPv6InterfaceDescription,
                  alaIPv6InterfaceMtu,
                  alaIPv6InterfaceType,
                  alaIPv6InterfaceAdminStatus,
                  alaIPv6InterfaceSendRouterAdvertisements,
                  alaIPv6InterfaceMaxRtrAdvInterval,
                  alaIPv6InterfaceAdvManagedFlag,
                  alaIPv6InterfaceAdvOtherConfigFlag,
                  alaIPv6InterfaceAdvReachableTime,
                  alaIPv6InterfaceAdvRetransTimer,
                  alaIPv6InterfaceAdvDefaultLifetime,
                  alaIPv6InterfaceName,
                  alaIPv6InterfaceAdvSendMtu,
                  alaIPv6InterfaceReachableTime,
                  alaIPv6InterfaceBaseReachableTime,
                  alaIPv6InterfaceMinRtrAdvInterval,
                  alaIPv6InterfaceClockSkew,
                  alaIPv6InterfaceRetransTimer,
                  alaIPv6InterfaceDADTransmits,
                  alaIPv6InterfaceAdvHopLimit,
                  alaIPv6InterfaceLPND,
		  alaIPv6InterfaceNeighborLimit,
                  alaIPv6InterfaceRetransBackoff,
                  alaIPv6InterfaceRetransMax,
                  alaIPv6InterfaceRouterPreference
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        interfaces."
    ::= { alcatelIND1IPv6MIBGroups 5 }

alaIPv6InterfaceAddressGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6InterfaceAddressRowStatus,
                  -- alaIPv6InterfaceAddress,
                  alaIPv6InterfaceAddressPrefixLength,
                  alaIPv6InterfaceAddressAnycastFlag,
                  alaIPv6InterfaceAddressDADStatus
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        addresses assigned to interfaces."
    ::= { alcatelIND1IPv6MIBGroups 6 }

alaIPv6InterfaceEUI64AddressGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6InterfaceEUI64AddressRowStatus,
                  -- alaIPv6InterfaceEUI64AddressPrefix,
                  alaIPv6InterfaceEUI64AddressPrefixLength,
                  alaIPv6InterfaceEUI64AddressIdentifier
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        EUI-64 addresses assigned to interfaces."
    ::= { alcatelIND1IPv6MIBGroups 7 }

alaIPv6InterfacePrefixGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6InterfacePrefixRowStatus,
                  -- alaIPv6InterfacePrefix,
                  -- alaIPv6InterfacePrefixLength,
                  alaIPv6InterfacePrefixValidLifetime,
                  alaIPv6InterfacePrefixOnLinkFlag,
                  alaIPv6InterfacePrefixPreferredLifetime,
                  alaIPv6InterfacePrefixAutonomousFlag,
                  alaIPv6InterfacePrefixSource,
                  alaIPv6InterfacePrefixValidLifetimeDecrement,
                  alaIPv6InterfacePrefixValidLifetimeExpire,
                  alaIPv6InterfacePrefixPreferredLifetimeDecrement,
                  alaIPv6InterfacePrefixPreferredLifetimeExpire
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        prefixes assigned to interfaces."
    ::= { alcatelIND1IPv6MIBGroups 8 }

alaIPv6PMTUGroup OBJECT-GROUP
    OBJECTS     {
                  -- alaIPv6PMTUDest,
                  alaIPv6PMTU,
                  alaIPv6PMTUExpire,
                  alaIPv6PMTUHits,
                  alaIPv6PMTUUpdates
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        path MTUs."
    ::= { alcatelIND1IPv6MIBGroups 9 }

alaIPv6RouteFlagsGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6RouteFlagsUp,
                  alaIPv6RouteFlagsGateway,
                  alaIPv6RouteFlagsHost,
                  alaIPv6RouteFlagsStatic,
                  alaIPv6RouteFlagsCloneable,
                  alaIPv6RouteFlagsDiscard,
                  alaIPv6RouteFlagsECMP,
                  alaIPv6RouteFlagsTransient
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        route flags."
    ::= { alcatelIND1IPv6MIBGroups 10 }

alaIPv6LocalUnicastGroup OBJECT-GROUP
    OBJECTS     {
                  -- alaIPv6LocalUnicastGlobalID,
                  -- alaIPv6LocalUnicastSubnetID,
                  -- alaIPv6LocalUnicastInterfaceID,
                  alaIPv6LocalUnicastPrefixLength,
                  alaIPv6LocalUnicastEUI64,
                  alaIPv6LocalUnicastRowStatus
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of
        local IPv6 unicast addresses (RFC 4193)."
    ::= { alcatelIND1IPv6MIBGroups 11 }

alaIPv6HostGroup OBJECT-GROUP
    OBJECTS     {
                  alaIPv6HostRowStatus
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of IPv6
        addresses assigned to Host."
    ::= { alcatelIND1IPv6MIBGroups 12 }

alcatelIND1IPv6NotificationGroup NOTIFICATION-GROUP
     NOTIFICATIONS {
                     -- ndpMaxLimitReached,
                     alaIPv6NeighborLimitExceeded,
                     alaIPv6NeighborVRFLimitExceeded,
                     alaIPv6InterfaceNeighborLimitExceeded
                   }
     STATUS current
     DESCRIPTION
        "The AlcatelIND1IPv6 MIB Notification Group."
     ::= { alcatelIND1IPv6MIBGroups 13 }

alcatelIND1IPv6DeprecatedObjectGroup OBJECT-GROUP
     OBJECTS {
               alaIPv6NeighborSlot,
	       alaIPv6NeighborPort,
	       alaIPv6NeighborState,
	       alaIPv6NeighborChassis,
	       alaIPv6InterfaceRAFilter,
	       alaIPv6RAFilterTrustedPortRowStatus
	     }
     STATUS current
     DESCRIPTION
        "Deprecated/obsolete objects"
     ::= { alcatelIND1IPv6MIBGroups 14 }

alcatelIND1IPv6DeprecatedNotificationGroup NOTIFICATION-GROUP
     NOTIFICATIONS {
                     ndpMaxLimitReached
                   }
     STATUS current
     DESCRIPTION
        "Deprecated/obsolete notifications"
     ::= { alcatelIND1IPv6MIBGroups 15 }

alaIPv6RAFilterGroup OBJECT-GROUP
    OBJECTS     {
                  -- alaIPv6RAFilterInterfaceVlan,
                  alaIPv6RAFilterInterfaceAdminStatus,
                  alaIPv6RAFilterInterfaceRowStatus,
		  alaIPv6RAFilterTrustedSourceRowStatus
                }
    STATUS     current
    DESCRIPTION
        "A collection of objects to support management of
        RA filtering."
    ::= { alcatelIND1IPv6MIBGroups 16 }

END