path: root/MIBS/packetlight/SL-SONET-MIB

-- *****************************************************************
-- SONET MIB
-- *****************************************************************

SL-SONET-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,
	NOTIFICATION-TYPE, Counter64,
	Gauge32 			     			FROM SNMPv2-SMI
	DisplayString, TruthValue, RowStatus
								  		FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP,
	NOTIFICATION-GROUP                  FROM SNMPv2-CONF
	InterfaceIndex, ifIndex            	FROM IF-MIB
	PerfCurrentCount, PerfIntervalCount,
	PerfTotalCount                      FROM PerfHist-TC-MIB
	sitelight				      		FROM SL-NE-MIB;

slSonetMib MODULE-IDENTITY
	LAST-UPDATED "200008280000Z"
	ORGANIZATION "PacketLight Networks Ltd."
	CONTACT-INFO
		"Omri_Viner@PacketLight.com"
	DESCRIPTION
		"This MIB module describes the SiteLight SONET Service.
		The mib contains the extensions required for the rfc2558."
	::= { sitelight 6 }

SignalLabel ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
       "STS path signal label -- one byte, C2, class A, is allocated to 
       indicate the construction of the STS SPE. 
       The following hex values of the C2 byte has been defined."
       SYNTAX  INTEGER {
			sigUnequipped(0),      -- Unequipped signal (no path originate equipment) 
			sigEquipped(1),        -- Equipped signal (standard payload) 
			sigPathFloatVt(2),     -- Floating VT mode 
			sigPathLoackedVt(3),   -- Locked VT mode 
			sigPathAsynchDs3(4),   -- Asynchronous mapping for DS3 
			sigPathSyntran(5),     -- Mapping byte observable SYNTRAN 
			sigPathAsyncDs4na(18), -- Asynchronous mapping for 139.264 Mbps 
			sigPathAtm(19),        -- Mapping for ATM 
			sigPathDqdb(20),       -- Mapping for DQDB 
			sigPathFddi(21),       -- Asynchronous mapping for FDDI 
			sigPathHdlc(22),       -- HDLC-Over-SONET Mapping 
			sigPathGfp(27)         -- GFP Mapping
        }
        
slSonetConfig       	OBJECT IDENTIFIER ::= { slSonetMib 1} 
slSonetOh           	OBJECT IDENTIFIER ::= { slSonetMib 2 }
-- slSonetPmMib           OBJECT IDENTIFIER ::= {slSonetMib 3}
-- slSonetAlarmsMib       OBJECT IDENTIFIER ::= {slSonetMib 4}
-- slSonetApsMib          OBJECT IDENTIFIER ::= {slSonetMib 5} 
slSonetPos          	OBJECT IDENTIFIER ::= { slSonetMib 6 }
slSonetAls          	OBJECT IDENTIFIER ::= { slSonetMib 7 }
slSonetFs				OBJECT IDENTIFIER ::= { slSonetMib 8 }
slSonetTraps			OBJECT IDENTIFIER ::= { slSonetMib 11 }
   
slSonetOhTrace			OBJECT IDENTIFIER ::= {slSonetOh 1} -- Trace Message
slSonetOhSl				OBJECT IDENTIFIER ::= {slSonetOh 2} -- Signal Label
slSonetOhTraps			OBJECT IDENTIFIER ::= {slSonetOh 3} -- Mismatch Traps

------------------------------ 
--
-- Sonet Config table 
--
------------------------------ 

slSonetConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF SlSonetConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
       "The SONET/SDH configuration table. This table has objects 
        for configuring sonet lines."
     ::= { slSonetConfig 1 }

slSonetConfigEntry OBJECT-TYPE
    SYNTAX SlSonetConfigEntry 
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
       "An entry in the table. There is an entry for each SONET line 
        in the table. Entries are automatically created for an 
        ifType value of sonet(39). 'ifAdminStatus' from the ifTable 
        must be used to enable or disable a line. By default, the 
        line state is down."
    INDEX   { ifIndex }
     ::= { slSonetConfigTable 1 }

SlSonetConfigEntry ::=
    SEQUENCE {
         slSonetConfigFrameScramble       	INTEGER,
         slSonetConfigType                	INTEGER,    -- deprecated
         slSonetConfigDccSelection		  	INTEGER,
		 slSonetResetAllCounters 		  	INTEGER,
		 slSonetPortThresholdTrapEnable	  	INTEGER,
		 slSonetConfigSdThreshold			INTEGER, 
		 slSonetConfigSfThreshold           INTEGER,
         slSonetCompression          		INTEGER,
         slSonetOverheadTunneling			INTEGER,
         slSonetLopBitmask					Counter64,  -- deprecated
         slSonetTdmTrunk					TruthValue,
         slSonetFsApply						INTEGER,  	-- deprecated
         slSonetTxLte						INTEGER,
         slSonetReceivedLte					INTEGER,
		 slSonetResetPmThreshold	 		INTEGER,
		 slSonetResetAlsParams	 			INTEGER,
		 slSonetTransceiverType	 			INTEGER,
		 slSonetTransceiverMedia	 		INTEGER
        }

slSonetConfigFrameScramble OBJECT-TYPE
        SYNTAX INTEGER {
                disabled(1),
                enabled(2)
                }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This object is used to disable or enable the Scrambling
             option in SONET line. Please refer to GR-253-CORE for 
             frame scrambling."
        REFERENCE
            "GR-253-CORE"
        DEFVAL { enabled }
        ::= {slSonetConfigEntry 1}

slSonetConfigType OBJECT-TYPE
        SYNTAX INTEGER {
                sonetSts3(1),			-- deprecated
                sonetSts3c(2),			-- deprecated
                sonetSts12(3),			-- deprecated
                sonetSts12c(4),			-- deprecated
                sonetSts48c(5),
                sonetSts3cx4(6),		-- deprecated
                sonetSts48(7),			-- deprecated
                sonetSts3cx16(8),		-- deprecated
                sonetSts3x16(9),		-- deprecated
                sonetSts12cx4(10),		-- deprecated
                sonetSts12x4(11),		-- deprecated
                sonetSts192c(12),
                sonetStsOther(13)       
                }
        MAX-ACCESS read-write
        STATUS current 
        DESCRIPTION
           "This object represents the configured line type for Trunks:
           sonetSts48c(5)    - 1  x Sts48  (2.5GbTrunk)
           sonetSts192c(12)  - 1  x Sts192 (10Gb Trunk)
           sonetStsOther(13) - for OC-n interfaces see slSonetFsTable."
        ::= {slSonetConfigEntry 2}        

slSonetConfigDccSelection OBJECT-TYPE
        SYNTAX INTEGER {
                sonetLineDcc(1),
                sonetSectionDcc(2),
                sonetInband(3)
                }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
           "This object selects the DCC type."
        ::= {slSonetConfigEntry 3 }        

slSonetResetAllCounters OBJECT-TYPE
    SYNTAX      INTEGER {
                    resetCounters(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Setting this variable to 1 will cause all of the counters
        (performance regsters) on this SONET interface to be initialized 
        to zero (0)."
    REFERENCE   "ANSI T1.231-1997 clause 9.1.5.1."
    ::= { slSonetConfigEntry 4 }
        
slSonetPortThresholdTrapEnable OBJECT-TYPE
    SYNTAX      INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable indicates whether threshold traps 
        should be generated for this SONET interface."
    REFERENCE   "ANSI T1.231-1997 clause 9.1.5.2."
    DEFVAL      { disabled }
   ::= { slSonetConfigEntry 5 }
 
slSonetConfigSdThreshold  OBJECT-TYPE
        SYNTAX    INTEGER (5..9)
        MAX-ACCESS    read-write
        STATUS    current
        DESCRIPTION
           "This object contains the Bit Error Rate threshold for
            Signal Degrade detection on the working line. Once this
            threshold is exceeded, an APS switch will occur.
            This value is 10 to -n where n is between 5 and 9
            (read-write)."
        DEFVAL {5}
        ::= { slSonetConfigEntry 6 }
 
slSonetConfigSfThreshold OBJECT-TYPE
     SYNTAX    INTEGER (3..5)
     MAX-ACCESS read-write
     STATUS    current
     DESCRIPTION
       "This object contains the Bit Error Rate threshold for
        Signal Fault detection on the working line. Once this
        threshold is exceeded, an APS switch will occur.
        This value is 10 to the -n, where n is between 3 and 5.
        (read-write)"
    DEFVAL {3}
    ::= { slSonetConfigEntry 7 }
 
slSonetCompression OBJECT-TYPE
     SYNTAX    INTEGER  {
     	uncompress(0),
     	posCompress32(1),
     	posCompress16(2)     		
     }
     MAX-ACCESS read-write
     STATUS    current
     DESCRIPTION
       "This object applies only for trunk ports.
       It specifies if the packets should be compressed.
       0 - Means no POS compression, 
       1 - Means POS compression with CRC-32.
       2 - Means POS compression with CRC-16.
       Note that the two connected trunks should be configured
       to the same value.
       Note also that the BW calculation of the OC-n should
       be changed according to this value."
    ::= { slSonetConfigEntry 9 }
 
slSonetOverheadTunneling OBJECT-TYPE
     SYNTAX    INTEGER {
     	none(0),
     	lineDcc(1),
     	k1k2(2),
     	full(3)
     }
     MAX-ACCESS read-write
     STATUS    current
     DESCRIPTION
       "The section and line overhead tunneling configuration:
       none(0)     - no tunneling support
       lineDcc(1)  - line DCC tunneling
       k1k2(2)     - line DCC + protection k byte
       full(3)     - all transport overhead bytes are tunneled"
    ::= { slSonetConfigEntry 10 }
 
slSonetLopBitmask OBJECT-TYPE
     SYNTAX    Counter64
     MAX-ACCESS read-only
     STATUS    current      -- deprecated
     DESCRIPTION
       "The LOP status. Each bit of the bits represent the status
       of the LOP alarm in corresponding STS.
       For a path with more than a single STS, only the value of the
       first STS in the path is relevant.
       This object is relevant only for the OC-N cards and not
       for the Trunk.
       In the next future this object will be replaced with
       an object of a new table that shall describe the OC-N
       frame structure."
    ::= { slSonetConfigEntry 11 }
 
slSonetTdmTrunk OBJECT-TYPE
     SYNTAX    TruthValue
     MAX-ACCESS read-write
     STATUS    current
     DESCRIPTION
       "This object is applicable only to the OC-n ports.
       TRUE  - means that the OC-n port is used as a TDM Trunk.
       FLASE - means normal OC-n port."
    ::= { slSonetConfigEntry 12 }
 
slSonetFsApply OBJECT-TYPE
     SYNTAX    INTEGER
     MAX-ACCESS read-write	-- deprecated
     STATUS    current
     DESCRIPTION
       "Writing to this object activate the slSonetFsTable setting.
       This allow the NMS to do many changes to the slSonetFsTable
       and then APPLY them at once. This prevent from going through
       unconsistent steps.
       This object always returns the value 0."
    ::= { slSonetConfigEntry 13 }
 
slSonetTxLte OBJECT-TYPE
     SYNTAX    INTEGER {
     	ssb00(1),     -- SONET
     	ssb10(2),     -- SDH
     	auto(5)       -- Tx what is detected
     }
     MAX-ACCESS read-write
     STATUS    current
     DESCRIPTION
       "The SS bits to transmit (bits 5,6 in H1,H1*)."
    ::= { slSonetConfigEntry 14 }
 
slSonetReceivedLte OBJECT-TYPE
     SYNTAX    INTEGER {
     	ssb00(1),     -- SONET
     	ssb10(2),     -- SDH
     	ssb01(3),     -- other
     	ssb11(4),     -- other
     	ssbinv(5)     -- invalid
     }
     MAX-ACCESS read-only
     STATUS    current
     DESCRIPTION
       "The detected LTE type, according to the received SS bits
       (bits 5,6 in H1,H1*)."
    ::= { slSonetConfigEntry 15 }

slSonetResetPmThreshold OBJECT-TYPE
    SYNTAX      INTEGER {
                    resetCounters(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Setting this variable to 1 will reset the PM threshold 
        parameters to the factory defaults."
    REFERENCE   "ANSI T1.231-1997 clause 9.1.5.1."
    ::= { slSonetConfigEntry 16 }

slSonetResetAlsParams OBJECT-TYPE
    SYNTAX      INTEGER {
                    resetCounters(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Setting this variable to 1 will reset the ALS 
        parameters to the factory defaults."
    REFERENCE   "ANSI T1.231-1997 clause 9.1.5.1."
    ::= { slSonetConfigEntry 17 }

slSonetTransceiverType OBJECT-TYPE
      SYNTAX      INTEGER {
      	none(1),
      	shortWave(2),  -- 850nm
      	longWave(3)    -- 1310nm
      }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The tranceiver type."
  ::= { slSonetConfigEntry 18 }

slSonetTransceiverMedia OBJECT-TYPE
	SYNTAX      INTEGER {
		none(1),        --
		sm(2),  --  Single Mode 
		mm(3)   --  Multi Mode 
	}
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION 
		"The tranceiver media."
    ::= { slSonetConfigEntry 19 }
   

-- ----------------------------------------------------------------
--
-- Sonet Trace Table
--
-- ----------------------------------------------------------------

slSonetTraceTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF SlSonetTraceEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "The SONET/SDH Trace table. This table contains 
            objects for tracing the sonet section and path." 
        ::= { slSonetOhTrace 1 }

slSonetTraceEntry OBJECT-TYPE
    SYNTAX      SlSonetTraceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the trace table. Entries exist for active sonet
         interfaces. The objects in this table are used to verify 
         continued connection between the two ends of the line."
    INDEX   { ifIndex }
    ::=     { slSonetTraceTable 1 }


SlSonetTraceEntry ::=
        SEQUENCE {
                slSonetTraceMode					INTEGER,
                slSonetTraceToTransmit              DisplayString,
                slSonetTraceToExpect                DisplayString,
                slSonetTraceFailure                 TruthValue,
                slSonetTraceReceived                DisplayString
		}

slSonetTraceMode OBJECT-TYPE
     SYNTAX      INTEGER {
     	enable(1),    -- notification and rdi
     	disable(2),   -- no notification and no rdi
     	monitoring(3) -- only notification and no rdi
     }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Determine the Trace Message Mode."
     REFERENCE
         "GR-253-CORE"
     ::= { slSonetTraceEntry 1 }

slSonetTraceToTransmit OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(0..62))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Sonet Trace To Transmit. This is string that
             is transmitted to perform Sonet trace 
             diagnostics. The trace string is  repetitively 
             transmited so that a trace receiving terminal can 
             verify its continued connection to the intended 
             transmitter. The default value is a zero-length string.
             Unless this object is set to a non-zero length string, 
             tracing will not be performed.
             The Agent is responsible to pad the end of the string with <CR><LF>."
         REFERENCE 
            "GR-253-CORE"
         ::= { slSonetTraceEntry 2 }
 
slSonetTraceToExpect OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(0..62))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Sonet Trace Massage To Expect. The receiving terminal 
             verifies if the incoming string matches this string. 
             The value of 'slSonetTraceFailure' indicates whether a 
             trace mismatch occurred. The default value is a 
             zero-length string.
             The Agent is responsible to pad the end of the string with <CR><LF>."
        REFERENCE
              "GR-253-CORE"
        ::= { slSonetTraceEntry 3 }

slSonetTraceFailure OBJECT-TYPE
     SYNTAX  TruthValue
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION
        "The value of this object is set to 'true' when Sonet 
         Section received trace does not match the 
         'slSonetTraceToExpect'."
     REFERENCE
         "GR-253-CORE"
     ::= { slSonetTraceEntry 4 }

slSonetTraceReceived OBJECT-TYPE
	SYNTAX  DisplayString (SIZE(0..62))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"This object is used to view the Sonet Trace Message that 
		is received by the receiving terminal.
		The Agent is responsible to pad the end of the string with <CR><LF>."
	REFERENCE
		"GR-253-CORE"
	::= { slSonetTraceEntry 5 }


-- ----------------------------------------------------------------
--
-- Signal Label Table
--
-- ----------------------------------------------------------------
 
slSonetSlTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF SlSonetSlEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "The SONET/SDH Signal Label table. This table contains 
       signal label for the sonet path."
     ::= { slSonetOhSl 1 }
     
slSonetSlEntry OBJECT-TYPE
     SYNTAX  SlSonetSlEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in the SONET/SDH Signal Label table. The entries 
        exist for active sonet lines. The objects in this table are 
        used to verify continued connection between the two ends of
        the line."
     INDEX   { ifIndex }
     ::= { slSonetSlTable 1 }


SlSonetSlEntry ::=
     SEQUENCE {
         slSonetSlToTransmit              SignalLabel,
         slSonetSlToExpect                SignalLabel,
         slSonetSlFailure                 TruthValue,
         slSonetSlReceived                INTEGER
         }

slSonetSlToTransmit OBJECT-TYPE
     SYNTAX      SignalLabel
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Sonet Signal Label To Transmit."
     REFERENCE
         "GR-253-CORE"
     ::= { slSonetSlEntry 2 }
 
slSonetSlToExpect OBJECT-TYPE
     SYNTAX      SignalLabel
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Sonet Signal Label To Expect."
     REFERENCE
         "GR-253-CORE"
     ::= { slSonetSlEntry 3 }

slSonetSlFailure OBJECT-TYPE
     SYNTAX      TruthValue
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The value of this object is set to 'true' when Sonet
         received signal label does not match the 'slSonetSlToExpect'."     
     REFERENCE
         "GR-253-CORE"
     ::= { slSonetSlEntry 4 }
 
slSonetSlReceived OBJECT-TYPE
	SYNTAX      INTEGER (0..255)
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"This object is used to view the Sonet Signal Label that is
		received by the receiving terminal."
	REFERENCE
		"GR-253-CORE"
	::= { slSonetSlEntry 5 }

-- ----------------------------------------------------------------
--
-- Packets Over Sonet/Sdh (POS) Performance Monitoring (PM) Table
--
-- ----------------------------------------------------------------
 
slSonetPosTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF SlSonetPosEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "The POS PM Table."
     ::= { slSonetPos 1 }
     
slSonetPosEntry OBJECT-TYPE
	SYNTAX  SlSonetPosEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The entries exist for active Trunk sonet lines 
		ifType = pos(171). The objects in this table are 
		used to moitor the POS layer."
	INDEX   { ifIndex }
	::= { slSonetPosTable 1 }

SlSonetPosEntry ::=
	SEQUENCE {
		slSonetPosFcs					Gauge32,
		slSonetPosAbort					Gauge32,
		slSonetPosMinViolation			Gauge32,
		slSonetPosMaxViolation			Gauge32,
		slSonetPosRxfifoDiscard			Gauge32,
		slSonetPosPacketReceived		Counter64,
		slSonetPosPacketReceivedOk		Counter64
	}

slSonetPosFcs OBJECT-TYPE
     SYNTAX      Gauge32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The Number of FCS Errors."
     ::= { slSonetPosEntry 1 }

slSonetPosAbort OBJECT-TYPE
     SYNTAX      Gauge32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The Number of Aborted packets."
     ::= { slSonetPosEntry 2 }

slSonetPosMinViolation OBJECT-TYPE
     SYNTAX      Gauge32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The Number of Minimum length violation packets."
     ::= { slSonetPosEntry 3 }

slSonetPosMaxViolation OBJECT-TYPE
     SYNTAX      Gauge32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The Number of Maximum length violation packets."
     ::= { slSonetPosEntry 4 }

slSonetPosRxfifoDiscard OBJECT-TYPE
     SYNTAX      Gauge32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The Number of packets discarded due to RXFIFO error."
     ::= { slSonetPosEntry 5 }

slSonetPosPacketReceived OBJECT-TYPE
     SYNTAX      Counter64
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The Number of packets received."
     ::= { slSonetPosEntry 6 }

slSonetPosPacketReceivedOk OBJECT-TYPE
     SYNTAX      Counter64
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "The Number of error free packets."
     ::= { slSonetPosEntry 7 }


-- ----------------------------------------------------------------
--
-- Automatic Laser Shutdown (ALS) Configuration Table
--
-- ----------------------------------------------------------------
 
slSonetAlsTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF SlSonetAlsEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "The ALS configuration Table."
     ::= { slSonetAls 1 }
     
slSonetAlsEntry OBJECT-TYPE
	SYNTAX  SlSonetAlsEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The entries exist for active sonet lines 
		ifType = sonet(39). The objects in this table are 
		used to configure the ALS algorithm."
	INDEX   { ifIndex }
	::= { slSonetAlsTable 1 }

SlSonetAlsEntry ::=
	SEQUENCE {
		slSonetAlsMode					INTEGER,
		slSonetLosDeclareTime			INTEGER,
		slSonetTestPulseTime			INTEGER,
		slSonetManualPulseTime			INTEGER,
		slSonetAutomaticPulseTime		INTEGER,
		slSonetAutomaticDelayTime		INTEGER,
		slSonetLaserTestActivate		INTEGER,
		slSonetLaserManualActivate		INTEGER
	}

slSonetAlsMode OBJECT-TYPE
     SYNTAX      INTEGER { 
     	enable(1), 
     	disable(2) 
     }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Enable/Disable the ALS algorithm.
        Note that the if the Laser Admin Status is 'down' the
        ALS mechanism is not operational."
     ::= { slSonetAlsEntry 1 }

slSonetLosDeclareTime OBJECT-TYPE
     SYNTAX      INTEGER { 
     	ms500(1), -- 500 ms
     	ms550(2), -- 550 ms
     	ms600(3)  -- 600 ms
     }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Time to declare optical LOS present or clear: 550 +- 50 msec."
     ::= { slSonetAlsEntry 2 }

slSonetTestPulseTime OBJECT-TYPE
     SYNTAX      INTEGER { 
     	s80(1),   -- 80 sec
     	s90(2),   -- 90 sec
     	s100(3)   -- 100 sec
     }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Manual restart for test Pulse time (in manual restart) - 90+-10 sec."
     ::= { slSonetAlsEntry 3 }

slSonetManualPulseTime OBJECT-TYPE
     SYNTAX      INTEGER { 
     	ms1750(1),   -- 1.75 Sec
     	ms2000(2),   -- 2.0  sec
     	ms2250(3)    -- 2.25 sec
     }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Manual restart Pulse time (in manual mode) - 2+-0.25 sec."
     ::= { slSonetAlsEntry 4 }

slSonetAutomaticPulseTime OBJECT-TYPE
     SYNTAX      INTEGER { 
     	ms1750(1),   -- 1.75 Sec
     	ms2000(2),   -- 2.0  sec
     	ms2250(3)    -- 2.25 sec
     }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Automatic restart Pulse time (in automatic mode) - 2+-0.25 sec."
     ::= { slSonetAlsEntry 5 }

slSonetAutomaticDelayTime OBJECT-TYPE
     SYNTAX      INTEGER (60..300)
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "In Automatic mode. The delay between two laser re-activations."
     ::= { slSonetAlsEntry 6 }

slSonetLaserTestActivate OBJECT-TYPE
     SYNTAX      INTEGER { activate(1) }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Activate the laser for test operation."
     ::= { slSonetAlsEntry 7 }

slSonetLaserManualActivate OBJECT-TYPE
     SYNTAX      INTEGER { activate(1) }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "Activate the laser manual operation."
     ::= { slSonetAlsEntry 8 }

-- ----------------------------------------------------------------
--
-- Frame Structure Configuration Table
--
-- ----------------------------------------------------------------
 
slSonetFsTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF SlSonetFsEntry
     MAX-ACCESS  not-accessible     -- deprecated
     STATUS  current
     DESCRIPTION
       "The frame structure configuration Table.
       In order to define a new path the NMS should create and configure
       an entry in this table.
       The table is also used to monitor the status of the LOP
       alarm per path."
     ::= { slSonetFs 1 }
     
slSonetFsEntry OBJECT-TYPE
	SYNTAX  SlSonetFsEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The entries exist for sonet paths 
		ifType = sonet(39). The objects in this table are 
		used to configure the frame structure.
		Each OC-N line interface shall maintain a static
		table with number of lines equal to the N.
		Initially the table will be initialized to STS-Nc."
	INDEX   { slSonetFsIfIndex, 
			  slSonetFsSts }
	::= { slSonetFsTable 1 }

SlSonetFsEntry ::=
	SEQUENCE {
		slSonetFsIfIndex				InterfaceIndex,
		slSonetFsSts					INTEGER,
		slSonetFsWidth					INTEGER,
		slSonetFsFullPathTermination	TruthValue,
		slSonetFsGranularity			INTEGER
	}

slSonetFsIfIndex OBJECT-TYPE
	SYNTAX		InterfaceIndex 
	MAX-ACCESS	read-only
	STATUS 		current
	DESCRIPTION
		"The interface index."
	::= { slSonetFsEntry 1 }        

slSonetFsSts OBJECT-TYPE
	SYNTAX		INTEGER 
	MAX-ACCESS	read-only
	STATUS 		current
	DESCRIPTION
		"The number of the first STS in the path.
		Note that no all values are legal because there is no
		support for combus with mixed structure"
	::= { slSonetFsEntry 2 }        

slSonetFsWidth OBJECT-TYPE
	SYNTAX		INTEGER 
	MAX-ACCESS	read-write
	STATUS 		current
	DESCRIPTION
		"The number STS's in the path.
		The width is only valid for the first STS in the path.
		The other STSs of the path will have width=0."
	::= { slSonetFsEntry 3 }        

slSonetFsFullPathTermination OBJECT-TYPE
	SYNTAX		TruthValue 
	MAX-ACCESS	read-write
	STATUS 		current
	DESCRIPTION
		"FALSE - means partial path termination (only LOP alarm).
		 TRUE  - include full support for path Alarms and PM counters."
	::= { slSonetFsEntry 4 }        

slSonetFsGranularity OBJECT-TYPE
	SYNTAX INTEGER {		
		 	vc4(1),
			vc3(2)
		} 
	MAX-ACCESS	read-write
	STATUS 		current
	DESCRIPTION
		"This value is set by the NMS according to the configured frame structure.
		Each VC-3 that is mapped to AUG-1 via VC-4 should have the value vc4(1).
		Otherwise the value should be vc3(2)."
	::= { slSonetFsEntry 5 }        

-- ----------------------------------------------------------------
--
-- Sonet Traps
--
-- ----------------------------------------------------------------

slSonetFsTableChange NOTIFICATION-TYPE
    OBJECTS { slSonetFsIfIndex }
	STATUS  current
	DESCRIPTION
		"A slSonetFsTableChange trap is sent when the
		content of the slSonetFsTable is changed.
		This trap may be used by the NMS to identify
		the removal of path interfaces, or addition of
		new path interfaces"
	::= { slSonetTraps 1 }


END