path: root/MIBS/pegasus/PEGASUS-SDH-MIB

PEGASUS-SDH-MIB DEFINITIONS ::= BEGIN

IMPORTS
  Integer32,
  OBJECT-TYPE,
  MODULE-IDENTITY         FROM SNMPv2-SMI
  TEXTUAL-CONVENTION,
  DisplayString,
  TruthValue              FROM SNMPv2-TC
  InterfaceIndex,
  InterfaceIndexOrZero,
  ifIndex                 FROM IF-MIB
  pegasusMibModule,
  OperStateEnum,
  AvailabilityStatusElem, 
  CommStateEnum           FROM PEGASUS-MIB;

pegasusSdhMibModule  MODULE-IDENTITY
  LAST-UPDATED "200403180000Z"  -- 18 March, 2004
  ORGANIZATION "Schmid Telecom, Zurich"
  CONTACT-INFO
    "Schmid Telecom AG
     Binzstrasse 35, CH-8048 Zurich
     Switzerland

     Email: xdslsupport@schmid-telecom.ch"
  DESCRIPTION
    "This MIB applies to the PEGASUS SDSL product manufactured by Schmid
    Telecom Zurich. The MIB is modelled after the PEM management model, so
    object hierarchy and individual variables agree with the PEM client. This 
    MIB represents an extension to the DS1-MIB and the SONET-MIB. These three
    MIB files are used to manage the PEGASUS STM-1 card.

    The PEGASUS-SDH-MIB contains five tables:
    - stm1CardTable         one entry for each STM-1 card configured.
    - stm1CardClockTable    one entry for each STM-1 card configured.
    - ethernetIfTable       one entry for each Ethernet interface of a 
                              configured STM-1 card.
    - vcTable               one entry for each Virtual Container (VC-3/4/12).
    - tugConfigTable        one entry for each Tributary Unit Group (TUG-3).

    Note
    - The tables that represent extensions to the DS1-/SINET-MIB use the 
      ifIndex from IF-MIB (ifTable)."

  REVISION "200403180000Z"  -- 18 March, 2004
  DESCRIPTION
    "Improved Alarm signalisation. A new variable stm1CardAlarmStatus shows 
    the alarms that are active on the STM-1 card. Active Ethernet alarms are 
    shown by ethernetIfAlarmStatus. The following values for vcAlarmStatus 
    are can not occur (not used):
        - vcgTxAddTimeout     - vcgDnuOk
        - vcgTxAdd            - vcgRxAdd
        - vcgTxRemove         - vcgRxRemove
        - vcgTxDnu            - vcgRxFail"
  REVISION "200401070000Z"  -- 7 January, 2004
  DESCRIPTION
    "Actually, only GFP is supported as Ethernet Encapsulation. Therefore 
    the variable etherIfEncapsulation is now read-only."
  REVISION "200311170000Z"  -- 17 November, 2003
  DESCRIPTION
    "Initial Revision."
  ::= { pegasusMibModule 8 }


-- *******************************************************************
-- stm1 card group
--
-- This group contains four tables:
-- - stm1CardTable
-- - ethernetIfTable
-- - vcConfigTable
-- - tugConfigTable
-- *******************************************************************
-- STM1 Card Enumerations and Subranges

ClockSourceEnum ::= INTEGER {
    rxLineClock(1),
    referenceClock(2),
    freeRun(3)
  }

ClockSyncStateEnum ::= INTEGER {
    syncOk(1),
    syncNotOk(2)  
  }

ClockModeEnum ::= INTEGER {
    enabled(1),
    disabled(2)
  }

ClockPriorityEnum ::= INTEGER {
    primary(1),
    secondary(2)
  }

ClockQualityEnum ::= INTEGER {
    prc(1),
    ssu-a(2),
    ssu-b(3),
    sec(4),
    dnu(5),
    auto(6),
    unknown(7)
  }

ClockStateEnum ::= INTEGER {
    invalid(1),
    valid(2)
  }

MultiplexingModeEnum ::= INTEGER {
    au3(1),
    au4(2)
  }

VirtualContainerTypeEnum ::= INTEGER {
    vc4(1),
    vc3(2),
    vc12(3)
  }

LaserOperationModeEnum ::= INTEGER {
    off(1),
    als(2)
  }

LaserStateEnum ::= INTEGER {
    on(1),
    shutdown(2),
    restart(3)
  }

SdhInterfaceEnum ::= INTEGER {
    optical(1),
    e1(2)
  }

PRBSPatternEnum ::= INTEGER {
    pattern2exp15(1),    -- 2^15-1 = 32767
    pattern2exp20(2)     -- 2^20-1 = 1048575
  }

TraceSizeEnum ::= INTEGER {
    size1byte(1),
    size16byte(2)
  }

SignalLabel ::= TEXTUAL-CONVENTION
  DISPLAY-HINT  "x"
  STATUS        current
  DESCRIPTION
      "Representation of a VC Signal Label. The meaning of the SignalLabel
      depends on the type of vitual container. 
      VC-12s use the following values:
      001b    Unequipped
      001b    Equipped (non specific)
      010b    Asynchronous
      011b    Bit Synchronous
      100b    Byte Synchronous
      101b    Reserved for future use
      110b    Test signal (O.181)
      111b    VC-AIS

      VC-4 and VC-3 use these values:
      00h     Unequipped or supervisory-unequipped
      01h     Equipped - non-specific
      02h     TUG Structure
      03h     Locked TU-n
      04h     Asynch. mapping of 34'386/44'736 kbit/s into Container-3
      12h     Asynch. mapping of 139'264 kbit/s into Container-4
      13h     ATM Mapping
      14h     MAN DQDB (IEEE 802.6 mapping
      15h     FDDI (ISO 9314) mapping
      16h     Mapping of HDLC/PPP framed signal
      17h     Mapping of SDL with SDH self synch. Scrambler
      18h     Mapping of HDLC/LAP-S framed signals
      19h     Mapping of SDL with set-reset scrambler
      1Ah     Mapping of 10 Gbit/s Ethernet frames (IEEE 802.3)
      CFh     Obsolete mapping of HDLC/PPP framed signal
      E1h-FCh Reserved for national use
      FEh     Test signal, O.181 specific mapping
      FFh     VC-AIS"
  SYNTAX        INTEGER(0..7|18..26|207|225..252|254..255)

ConcatenationTypeEnum ::= INTEGER {
    lcas(1),
    nonLCAS(2)
  }

EthernetIfEncapsulationEnum ::= INTEGER {
    disabled(1),    -- not supported feature
    gfp(2),
    lapf(3),        -- not supported feature
    laps(4),        -- not supported feature
    ppp(5)          -- not supported feature
  }

OrderLevelEnum ::= INTEGER {
    highOrder(1),
    lowOrder(2)
  }

STM1SlotNumber ::= INTEGER(2)
TUGIndex ::= INTEGER(1..3)
TUGIndexOrZero ::= INTEGER(0..3)

-- STM-1 Card: STM-1 Card Table

stm1CardTable OBJECT-TYPE
  SYNTAX      SEQUENCE OF Stm1CardEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "A table containing stm1 card specific information."
  ::= { pegasusSdhMibModule 1 }

stm1CardEntry OBJECT-TYPE
  SYNTAX      Stm1CardEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "Row and index definition for stm1 card table."
  INDEX   { stm1CardSlotNumber }
  ::= { stm1CardTable 1 }

Stm1CardEntry ::= SEQUENCE {
    stm1CardSlotNumber              STM1SlotNumber,
    -- identification
    stm1CardName                    DisplayString,
    stm1CardHardwareVersion         DisplayString,
    stm1CardFirmwareVersion         DisplayString,
    stm1CardManufacturer            DisplayString,
    stm1CardSerialNumber            DisplayString,
    -- configuration
    stm1CardMultiplexingMode        MultiplexingModeEnum,
    stm1CardJ0TraceMonitoring       OperStateEnum,
    stm1CardJ1TraceMonitoring       OperStateEnum,
    stm1CardJ2TraceMonitoring       OperStateEnum,
    stm1CardJ0PathTraceSize         TraceSizeEnum,
    stm1CardJ0PathTraceSend         DisplayString,          -- same as sonetMediumCircuitIdentifier
    stm1CardJ0PathTraceExpected     DisplayString,    
    stm1CardJ0PathTraceReceive      DisplayString,
    stm1CardLaserOperationMode      LaserOperationModeEnum,
    stm1CardLaserState              LaserStateEnum,
    -- supervision
    stm1CardOperState               OperStateEnum,
    stm1CardAvailabilityState       AvailabilityStatusElem,
    stm1CardMgmtCommState           CommStateEnum,
    -- maintenance
    stm1CardPRBSGeneratorSink       SdhInterfaceEnum,
    stm1CardPRBSAnalyzerSource      SdhInterfaceEnum,
    stm1CardPRBSPattern             PRBSPatternEnum,
    -- additional card alarm status
    stm1CardAlarmStatus             Integer32
  }

stm1CardSlotNumber OBJECT-TYPE
  SYNTAX      STM1SlotNumber
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "Slot number for stm1 card."
  ::= { stm1CardEntry 1 }

stm1CardName OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Name of the PEGASUS device."
  ::= { stm1CardEntry 2 }

stm1CardHardwareVersion OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Hardware version of the STM-1 card. This is also called CHM-number
          (it always starts with the letters 'CHM'). The number '404' after
          'CHM' identifies the card as a STM-1 card."
  ::= { stm1CardEntry 3 }

stm1CardFirmwareVersion OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Version number and build date of the firmware running on the line 
          card. The format is 'major.minor YYYYMMDD hh:mm'."
  ::= { stm1CardEntry 4 }

stm1CardManufacturer OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Manufacturer of the STM-1 card."
  ::= { stm1CardEntry 5 }

stm1CardSerialNumber OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Serial number of the line card. Also called HM-number, as it always 
          starts with 'HM'. Example: HMVSS014810294."
  ::= { stm1CardEntry 6 }

stm1CardMultiplexingMode OBJECT-TYPE
  SYNTAX      MultiplexingModeEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Selects the SDH multiplexing mode. Either it is STM1-AU3-VC3 or 
          STM1-AU4-VC4."
  ::= { stm1CardEntry 7 }

stm1CardJ0TraceMonitoring OBJECT-TYPE
  SYNTAX      OperStateEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "If trace monitoring is disable no alarm is propagated to PEM and 
          also no RDI/AIS is inserted."
  ::= { stm1CardEntry 8 }
                      
stm1CardJ1TraceMonitoring OBJECT-TYPE
  SYNTAX      OperStateEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "If trace monitoring is disable no alarm is propagated to PEM and 
          also no RDI/AIS is inserted."
  ::= { stm1CardEntry 9 }

stm1CardJ2TraceMonitoring OBJECT-TYPE
  SYNTAX      OperStateEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "If trace monitoring is disable no alarm is propagated to PEM and 
          also no RDI/AIS is inserted."
  ::= { stm1CardEntry 10 }

stm1CardJ0PathTraceSize OBJECT-TYPE
  SYNTAX      TraceSizeEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Size of the Regenerator Section Trace Message."
  ::= { stm1CardEntry 11 }

stm1CardJ0PathTraceSend OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Configurable Regenerator Section (RS) Trace Message."
  ::= { stm1CardEntry 12 }

stm1CardJ0PathTraceExpected OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Regenerator Section (RS) Trace Message that should be received."
  ::= { stm1CardEntry 13 }

stm1CardJ0PathTraceReceive OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Regenerator Section (RS) Trace Message that is be received."
  ::= { stm1CardEntry 14 }

stm1CardLaserOperationMode OBJECT-TYPE
  SYNTAX      LaserOperationModeEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Configuration of the 'Automatic Laser Shutdown' feature."
  ::= { stm1CardEntry 15 }

stm1CardLaserState OBJECT-TYPE
  SYNTAX      LaserStateEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Actual state of the laser."
  ::= { stm1CardEntry 16 }

stm1CardOperState OBJECT-TYPE
  SYNTAX      OperStateEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "The operational state is a status property indicating whether or 
          not a device is physically installed and working.
          enabled   The device is partially or fully operable and available 
                    for use.
          disabled  The device is totally inoperable and unavailable to provide 
                    service."
  ::= { stm1CardEntry 17 }

stm1CardAvailabilityState OBJECT-TYPE
  SYNTAX      AvailabilityStatusElem
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "The availability status gives more detailed information about
          failures within a device. An empty status set means that no error
          exists. Possible status are:
          in test       The device is under test.
          failed        The device has an internal fault that prevents it from 
                        operating.
          power off     The device requires power to be applied and is not 
                        powered on.
          off line      The device requires a routine operation to be performed
                        to place it online and make it available for use.
          off duty      The device has been made inactive by an internal control
                        process in accordance with a predetermined time
                        schedule.
          dependency    The device can not operate because some other resource 
                        on which it depends is unavailable.
          degraded      The device is partially defective but still operable.
          not installed The device is not present, or incomplete.
          log full      The log is full."
  ::= { stm1CardEntry 18 }

stm1CardMgmtCommState OBJECT-TYPE
  SYNTAX      CommStateEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "The Management Comm State indicates the state of the management
          connection between the PEM Server and the STM-1 card.
          disconnected            No connection has been established.
          init                    A connection has freshly been established on
                                  the underlying protocol, but no management
                                  information has been transmitted so far.
          identification          The connected device is being identified.
          check hardware          The connected hardware is compared to the one
                                  stored in the configuration.
          hardware adaptation     If the configured and the existing device do
                                  not match, an adoption is made. The behaviour
                                  in this case can be configured with the 'HW
                                  Adaptation Policy' option.
          check program version   The program version of the connected hardware
                                  is compared to the one stored in the
                                  configuration.
          check config version    The configuration version of the connected
                                  hardware is compared to the one stored in the
                                  configuration.
          download config         If a configuration version mismatch has been
                                  detected and the 'Config Priority' of 'PEGASUS
                                  system' is set to 'Device', the configuration
                                  is downloaded from the device to the PEM
                                  Server.
          upload config           If a configuration version mismatch has been
                                  detected and the 'Config Priority' of 'PEGASUS
                                  system' is set to 'Server', the configuration
                                  is uploaded from the PEM Server to the device.
          status synch            The values of the status properties are being
                                  synchronised.
          resetting               The device is resetting.
          inactive                The device is connected, but it is inactive,
                                  that is not operational. This may be due to a
                                  hardware mismatch.
          active                  The management connection between the device
                                  and the PEM Server is fully established and
                                  the device is active."
  ::= { stm1CardEntry 19 }

stm1CardPRBSGeneratorSink OBJECT-TYPE
  SYNTAX      SdhInterfaceEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Determines, whether the PRBS Generator should be used on the 
          optical or on the E1 links."
  ::= { stm1CardEntry 20 }

stm1CardPRBSAnalyzerSource OBJECT-TYPE
  SYNTAX      SdhInterfaceEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Determines, whether the PRBS Analyzer should be used on the 
          optical or on the E1 links."
  ::= { stm1CardEntry 21 }

stm1CardPRBSPattern OBJECT-TYPE
  SYNTAX      PRBSPatternEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Determines the PRBS Pattern to be used."
  ::= { stm1CardEntry 22 }

stm1CardAlarmStatus OBJECT-TYPE
  SYNTAX      Integer32 (1..511)
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "This variable indicates the status of STM-1 card, regenerator 
          section and multiplex section. It's a bitmap represented as a sum. 
          Therefore multiple alarms can be displayed simultaneously. The value 
          noAlarm is only set if there isn't any alarm active. 
          The various bit positions are:
            1     No alarm present
            -- STM-1 card --
            2     Initialization failure
            4     Firmware Version Mismatch
            8     Maintenance
            -- regenerator section RS --
            16    Loss of Signal (LOS)
            32    Loss of Frame (LOF)
            64    Trace ID Mismatch (RS-TIM)
            -- multiplex section MS --
            128   Alarm Indication Signal (MS-AIS)
            256   Remote Defect Indication (MS-RDI, former FERF)"
  ::= { stm1CardEntry 23 }

-- STM-1 Card: STM-1 Card Clock Table

stm1CardClockTable OBJECT-TYPE
  SYNTAX      SEQUENCE OF Stm1CardClockEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "A table containing stm1 card specific clock information."
  ::= { pegasusSdhMibModule 2 }

stm1CardClockEntry OBJECT-TYPE
  SYNTAX      Stm1CardClockEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "Row and index definition for stm1 card clock table."
  INDEX   { stm1CardSlotNumber }
  ::= { stm1CardClockTable 1 }

Stm1CardClockEntry ::= SEQUENCE {
    -- clock settings
    stm1CardActiveClockSource       ClockSourceEnum,
    stm1CardClockSyncState          ClockSyncStateEnum,
    stm1CardTxLineClockQuality      ClockQualityEnum,
    stm1CardRxClockMode             ClockModeEnum,
    stm1CardRxClockPriority         ClockPriorityEnum,
    stm1CardRxClockQuality          ClockQualityEnum,
    stm1CardRxClockState            ClockStateEnum,
    stm1CardReferenceClockMode      ClockModeEnum,
    stm1CardReferenceClockPriority  ClockPriorityEnum,
    stm1CardReferenceClockQuality   ClockQualityEnum,
    stm1CardReferenceClockState     ClockStateEnum
  }

stm1CardActiveClockSource OBJECT-TYPE
  SYNTAX      ClockSourceEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Displays which clock sourceis active and used as sync source."
  ::= { stm1CardClockEntry 1 }

stm1CardClockSyncState OBJECT-TYPE
  SYNTAX      ClockSyncStateEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Sync status is OK if RX or Reference clock is valid and used as 
          active sync source."
  ::= { stm1CardClockEntry 2 }

stm1CardTxLineClockQuality OBJECT-TYPE
  SYNTAX      ClockQualityEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "This is the clock quality of the outgoing SDH signal. The default 
          sets the outgoing quality to the incoming quality. Sometime it may 
          be useful to set a fix outgoing quality."
  ::= { stm1CardClockEntry 3 }

stm1CardRxClockMode OBJECT-TYPE
  SYNTAX      ClockModeEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "If enabled the RX line clock can be used as sync source."
  ::= { stm1CardClockEntry 4 }

stm1CardRxClockPriority OBJECT-TYPE
  SYNTAX      ClockPriorityEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "This value has always the opposite value of Reference Clock 
          Priority."
  ::= { stm1CardClockEntry 5 }

stm1CardRxClockQuality OBJECT-TYPE
  SYNTAX      ClockQualityEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "This is the clock quality of the incoming SDH signal."
  ::= { stm1CardClockEntry 6 }

stm1CardRxClockState OBJECT-TYPE
  SYNTAX      ClockStateEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Clock status is valid if a good clock can be found on input 
          (clock checker)."
  ::= { stm1CardClockEntry 7 }

stm1CardReferenceClockMode OBJECT-TYPE
  SYNTAX      ClockModeEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "If enabled the Reference clock (V5 card input) can be used as sync 
          source."
  ::= { stm1CardClockEntry 8 }

stm1CardReferenceClockPriority OBJECT-TYPE
  SYNTAX      ClockPriorityEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "This value has always the opposite value of Rx Clock Priority."
  ::= { stm1CardClockEntry 9 }

stm1CardReferenceClockQuality OBJECT-TYPE
  SYNTAX      ClockQualityEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Defines the quality of the reference clock input. This value will 
          be transmitted in SDH-TX if reference clock is used as active sync 
          source."
  ::= { stm1CardClockEntry 10 }

stm1CardReferenceClockState OBJECT-TYPE
  SYNTAX      ClockStateEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Clock status is valid if a good clock can be found on input 
          (clock checker)."
  ::= { stm1CardClockEntry 11 }


-- STM-1 Card: Ethernet Interface Table

ethernetIfTable OBJECT-TYPE
  SYNTAX      SEQUENCE OF EthernetIfEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "This table contains additional information concerning the ethernet 
          interfaces of a STM-1 card. It represents an extension of the 
          if(X)Table (see IF-MIB)."
  ::= { pegasusSdhMibModule 3 }

ethernetIfEntry OBJECT-TYPE
  SYNTAX      EthernetIfEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "Row and index definition for the ethernetIfTable."
  INDEX       { ifIndex }
  ::= { ethernetIfTable 1 }

EthernetIfEntry ::= SEQUENCE {
    etherIfConcatenationOption  ConcatenationTypeEnum,
    etherIfEncapsulation        EthernetIfEncapsulationEnum,
    etherIfOrderLevel           OrderLevelEnum,
    etherIfAlarmStatus          Integer32
  }

etherIfConcatenationOption OBJECT-TYPE
  SYNTAX      ConcatenationTypeEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Configuration of the Link Capacity Adjustment Scheme."
  ::= { ethernetIfEntry 1 }

etherIfEncapsulation OBJECT-TYPE
  SYNTAX      EthernetIfEncapsulationEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "This attribute shows the used Ethernet encapsulation protocol."
  ::= { ethernetIfEntry 2 }

etherIfOrderLevel OBJECT-TYPE
  SYNTAX      OrderLevelEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Only relevant, if SDH Multiplexing Mode (see STM-1 card propertied) 
          is set to VC3."
  ::= { ethernetIfEntry 3 }

etherIfAlarmStatus OBJECT-TYPE
  SYNTAX      Integer32 (1..511)
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "This variable indicates the status of an Ethernet Interface. It's 
          a bitmap represented as a sum. Therefore multiple defects can be 
          displayed simultaneously. The value noAlarm is only set if there 
          isn't any alarm. 
          The various bit positions are (LO = LowOrder, HO = HighOrder):
            1   No alarm
            2   LO LCAS group identifier mismatch (Rx)
            4   HO LCAS group identifier mismatch (Rx)
            8   LO VCG exceeds max. differential delay (Rx)
            16  HO VCG exceeds max. differential delay (Rx)
            32  LO VCG exceeds max. differential delay, calculated over all 
                containers (Rx)
            64  HO VCG exceeds max. differential delay, calculated over all 
                containers (Rx)
            128 Transmit FIFO overflow (Tx)
            256 Rx head-of-line blocking FIFO overflow"
  ::= { ethernetIfEntry 4 }

-- STM-1 Card: Virtual Container (VC) Configuration Table

vcTable OBJECT-TYPE
  SYNTAX      SEQUENCE OF VcEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "This table contains additional information for VC concerning the 
          multiplexing configuration. It's an extension of the ifTable 
          (IF-MIB) and the tables of the SONET/SDH-MIB.
          "
  ::= { pegasusSdhMibModule 4 }

vcEntry OBJECT-TYPE
  SYNTAX      VcEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "Row and index definition for the vcConfigTable."
  INDEX       { ifIndex }
  ::= { vcTable 1 }

VcEntry ::= SEQUENCE {
    vcType                  VirtualContainerTypeEnum,
    vcRelatedTUG            TUGIndexOrZero,
    vcRelatedVC             InterfaceIndexOrZero,
    vcAssignedIfIndex       InterfaceIndexOrZero,
    vcPathTraceSend         DisplayString,            -- same as dsx1CircuitIdentifier
    vcPathTraceExpected     DisplayString,
    vcPathTraceReceive      DisplayString,
    vcSignalLabelSend       SignalLabel,
    vcSignalLabelExpected   SignalLabel,
    vcSignalLabelReceive    SignalLabel,
    vcAlarmStatus           Integer32
  }

vcType OBJECT-TYPE
  SYNTAX      VirtualContainerTypeEnum
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Type of Virtual Container (VC). In Pegasus VC-4, VC-3 or VC-12."
  ::= { vcEntry 1 }

vcRelatedTUG OBJECT-TYPE
  SYNTAX      TUGIndexOrZero
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Represents the index of the Tributary Unit Group within the 
          tugConfigTable to which this VC is assigned to. The value depends 
          also on the multiplexing mode. If the value is 0, there doesn't 
          exist the relation VC-x to TUG-3. Possible values:
          1) multiplexing mode = AU-4:
              VC-4:    vcRelatedTUG = 0
              VC-3/12: vcRelatedTUG = 1..3
          2) multiplexing mode = AU-3:
              vcRelatedTUG = 0 (no dependency on VC type)"
  ::= { vcEntry 2 }

vcRelatedVC OBJECT-TYPE
  SYNTAX      InterfaceIndexOrZero
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "Represents the index of the Virtual Container within the 
          ifTable to which this VC is assigned to. The value depends 
          also on the multiplexing mode. If the value is 0, there doesn't 
          exist the relation VC-x to VC-x. Possible values:
          1) multiplexing mode = AU-4:
              vcRelatedVC = 0 (no dependency on VC type)
          2) multiplexing mode = AU-3:
              VC-3:   vcRelatedVC = 0
              VC-12:  vcRelatedVC = 2031..2033 (example for slot 2)"
  ::= { vcEntry 3 }

vcAssignedIfIndex OBJECT-TYPE
  SYNTAX      InterfaceIndexOrZero
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Represents the index of the interface within the ifTable (IF-MIB) 
          that transmits to this VC."
  ::= { vcEntry 4 }

vcPathTraceSend OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "The value of the outgoing J1 Byte VC Path Trace byte message."
  ::= { vcEntry 5 }

vcPathTraceExpected OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "The value of the expected J1 Byte VC Path Trace byte message."
  ::= { vcEntry 6 }

vcPathTraceReceive OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "The value of the incoming J1 Byte VC Path Trace byte message."
  ::= { vcEntry 7 }

vcSignalLabelSend OBJECT-TYPE
  SYNTAX      SignalLabel
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "The outgoing C2 VC Signal Label (0x02 = TUG structure)."
  ::= { vcEntry 8 }

vcSignalLabelExpected OBJECT-TYPE
  SYNTAX      SignalLabel
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "The expected C2 VC Signal Label (0x02 = TUG structure)."
  ::= { vcEntry 9 }

vcSignalLabelReceive OBJECT-TYPE
  SYNTAX      SignalLabel
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "The incoming C2 VC Signal Label (0x02 = TUG structure)."
  ::= { vcEntry 10 }

vcAlarmStatus OBJECT-TYPE
  SYNTAX      Integer32 (1..524287)
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          "This variable indicates the status of the VC. It's a bitmap 
           represented as a sum. Therefore multiple defects can be displayed 
           simultaneously. The value noDefect should only be set if there is 
           no other defect. Some alarms can't occur actually.
           The various bit positions are:
            1       vcNoDefect
            2       vcAlarmAIS
            4       vcAlarmLOP
            8       vcAlarmRDI
            16      vcAlarmUnequipped
            32      vcAlarmPLM
            64      vcAlarmTIM
            128     vcAlarmLOM
            256     vcAlarmRFI
            512     vcgTxAddTimeout     -- not used (deprecated)
            1024    vcgTxAdd            -- not used (deprecated)
            2048    vcgTxRemove         -- not used (deprecated)
            4096    vcgTxDnu            -- not used (deprecated)
            8192    vcgDnuOk            -- not used (deprecated)
            16384   vcgRxAdd            -- not used (deprecated)
            32768   vcgRxRemove         -- not used (deprecated)
            65536   vcgRxFail           -- not used (deprecated)
            131072  vcgLcasCrcError
            262144  vcgNonLcasSeqError"
  ::= { vcEntry 11 }

-- STM-1 Card: Tributary Unit Group (TUG) Configuration Table

tugConfigTable OBJECT-TYPE
  SYNTAX      SEQUENCE OF TugConfigEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "This table contains information concerning Tributary Unit Groups. 
          If AU-3 structure is used, this table is empty."
  ::= { pegasusSdhMibModule 5 }

tugConfigEntry OBJECT-TYPE
  SYNTAX      TugConfigEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "Row and index definition for the tugConfigTable."
  INDEX       { tugIndex }
  ::= { tugConfigTable 1 }

TugConfigEntry ::= SEQUENCE {
    tugIndex        TUGIndex,
    tugRelatedVC4   InterfaceIndex,
    tugOrderLevel   OrderLevelEnum
  }

tugIndex OBJECT-TYPE
  SYNTAX      TUGIndex
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
          "Number of the TUG. Range 1..3"
  ::= { tugConfigEntry 1 }

tugRelatedVC4 OBJECT-TYPE
  SYNTAX      InterfaceIndex
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
          ""
  ::= { tugConfigEntry 2 }

tugOrderLevel OBJECT-TYPE
  SYNTAX      OrderLevelEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
          "Individual Order Level of this TUG. If high order is used, the TUG 
          has exactly one VC-3 and no VC-12s. If low order is used, the TUG 
          has exactly 21 VC-12 and no VC-3."
  ::= { tugConfigEntry 3 }


-- STM-1 Support: Additional information

sdhMibRevision OBJECT-TYPE
  SYNTAX      DisplayString
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The version number assigned by the version control system. You can query
      this from the agent, to find out with which version of the MIB was built
      into the agent. The value is also present in copies of the MIB to feed
      into SNMP managers. Comparing the version numbers from both sources can
      help to detect mismatches. The revision string for this version is:
      $Workfile: PEGASUS-SDH-MIB.txt $ $Revision: 14 $ $Date: 3/18/04 6:40p $"
  DEFVAL    { "$Workfile: PEGASUS-SDH-MIB.txt $ $Revision: 14 $ $Date: 3/18/04 6:40p $" }
  ::= { pegasusSdhMibModule 6 }

END