path: root/MIBS/raisecom/ROSMGMT-OSPFv2-MIB

-- *****************************************************************
-- ROSMGMT-OSPFv2-MIB.mib
--
-- May 2010, zhangyan
--
-- Copyright(c) 2020 by RAISECOM TECH, Ltd. 
-- All rights reserved.
-- 
-- *****************************************************************

--MibName=rosMgmtOspf
ROSMGMT-OSPFV2-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,Counter32, Gauge32,
    Integer32, Unsigned32, IpAddress
                 FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue, RowStatus
                 FROM SNMPv2-TC 
    EnableVar	 FROM SWITCH-TC   
    InterfaceIndexOrZero
                 FROM IF-MIB                
    rosMgmt	            	         
                 FROM RAISECOM-BASE-MIB;       

    rosMgmtOspf MODULE-IDENTITY
        LAST-UPDATED    "202005070000Z"  -- May 07, 2020
        ORGANIZATION    "Raisecom Technology CO.,Ltd."
        CONTACT-INFO    
                "       Raise Systems        
                        Postal: Beijing, China
                        Tel: 86-010-82884499
                        E-mail: support@raisecom.com"

        DESCRIPTION     "This MIB module defines objects to Ospf."

        REVISION        "202005070000Z"  -- May 07, 2020
        DESCRIPTION     "Initial MIB creation."

        ::= { rosMgmt 47} 

ProcessID ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d-0"
       STATUS       current
       DESCRIPTION
          "The OSPF process id."
       SYNTAX       Unsigned32          
        
AreaID ::= TEXTUAL-CONVENTION 
       DISPLAY-HINT "1d.1d.1d.1d" 
       STATUS       current
       DESCRIPTION
          "An OSPF Area Identifier.
           Note that the Area ID, in OSPF, has the same format
           as an IP address, but has the function of defining
           a summarization point for link state advertisements."
       SYNTAX       IpAddress

RouterID ::= TEXTUAL-CONVENTION  
       DISPLAY-HINT "1d.1d.1d.1d"
       STATUS       current
       DESCRIPTION
          "A OSPF Router Identifier.
           Note that the Router ID, in OSPF, has the same format
           as an IP address, but identifies the router independent
           of its IP address."
       SYNTAX       IpAddress

Metric ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d-0"
       STATUS       current
       DESCRIPTION
          "The OSPF internal metric.
           Note that the OSPF metric is defined as an unsigned value
           in the range."
       SYNTAX       Integer32 (0..'FFFF'h)

BigMetric ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d-0"
       STATUS       current
       DESCRIPTION
          "The OSPF external metric."
       SYNTAX       Integer32 (0..'FFFFFF'h)

Status ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "An indication of the operability of an OSPF
          function or feature.  For example, the status
          of an interface: 'enabled' indicates that
          it is willing to communicate with other OSPF routers,
          and 'disabled' indicates that it is not."
       SYNTAX       INTEGER { enabled (1), disabled (2) }

PositiveInteger ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d-0"
       STATUS       current
       DESCRIPTION
          "A positive integer.  Values in excess are precluded as
          unnecessary and prone to interoperability issues."
       SYNTAX       Integer32 (0..'7FFFFFFF'h)

HelloRange ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d-0"
       STATUS       current
       DESCRIPTION
          "The range of intervals in seconds on which Hello messages
          are exchanged."
       SYNTAX       Integer32 (1..'FFFF'h)

UpToMaxAge ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d-0"
       STATUS       current

       DESCRIPTION
          "The values in seconds that one might find or configure
          for variables bounded by the maximum age of an LSA."
       SYNTAX       Integer32 (0..3600)

DesignatedRouterPriority ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d-0"
       STATUS       current
       DESCRIPTION
          "The range of values defined for the priority of a system
          for becoming the designated router."
       SYNTAX       Integer32 (0..'FF'h)

OspfAuthenticationType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "The authentication type."
       SYNTAX       INTEGER {
                       none (0),
                       simplePassword (1),
                       md5 (2)
                       -- reserved for specification by IANA (> 2)
                    }


--  Define groups in ROSMGMT-OSPFv2-MIB
    rosMgmtOspfNotifications        OBJECT IDENTIFIER ::= { rosMgmtOspf 1 } 
    rosMgmtOspfObjects              OBJECT IDENTIFIER ::= { rosMgmtOspf 2 } 
    rosMgmtOspfConformance          OBJECT IDENTIFIER ::= { rosMgmtOspf 3 } 
 
--   rosMgmtOspfNotifications 
--   
--   This group defines the traps related to Ospf.

--
--  Define groups in rosMgmtOspfNotifications
--
--    rosMgmtOspfTrapControl    OBJECT IDENTIFIER ::= { rosMgmtOspfNotifications 1 }

   
--
--  rosMgmtOspfTrapControl 
--
--  This Table defines the control infomation of Ospf Traps.
--
   rosMgmtOspfTrapControlTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfTrapControlEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table enable or disable ospf traps"
       ::= { rosMgmtOspfNotifications 1 }

  rosMgmtOspfTrapControlEntry OBJECT-TYPE
       SYNTAX   RosMgmtOspfTrapControlEntry
       MAX-ACCESS   not-accessible
       STATUS   current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfTrapControl.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       INDEX { rosMgmtOspfProcessId }
       ::= { rosMgmtOspfTrapControlTable 1 }

  RosMgmtOspfTrapControlEntry ::=
       SEQUENCE {
          rosMgmtOspfSetTrap
             EnableVar,
          rosMgmtOspfConfigErrorType
             INTEGER,
          rosMgmtOspfPacketType
             INTEGER,
          rosMgmtOspfPacketSrc
             IpAddress
             }
             
    rosMgmtOspfSetTrap OBJECT-TYPE
        SYNTAX   EnableVar
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "Whether the Device shoule send traps."    
       DEFVAL {disable}
       ::= { rosMgmtOspfTrapControlEntry 1 }


    rosMgmtOspfConfigErrorType OBJECT-TYPE
        SYNTAX   INTEGER    {
                    badVersion (1),
                    areaMismatch (2),
                    unknownNbmaNbr (3), -- Router is Dr eligible
                    unknownVirtualNbr (4),
                    authTypeMismatch(5),
                    authFailure (6),
                    netMaskMismatch (7),
                    helloIntervalMismatch (8),
                    deadIntervalMismatch (9),
                    optionMismatch (10) }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "Potential types  of  configuration  conflicts.
           Used  by the ospfConfigError and ospfConfigVir-
           tError traps."
   ::= { rosMgmtOspfTrapControlEntry 2 }


    rosMgmtOspfPacketType OBJECT-TYPE
        SYNTAX   INTEGER    {
                    hello (1),
                    dbDescript (2),
                    lsReq (3),
                    lsUpdate (4),
                    lsAck (5) }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "OSPF packet types."
   ::= { rosMgmtOspfTrapControlEntry 3 }


    rosMgmtOspfPacketSrc OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP address of an inbound packet that  can-
           not be identified by a neighbor instance."
       ::= { rosMgmtOspfTrapControlEntry 4 }  


--
--  rosMgmtOspfTraps 
--
--  This Table defines the Ospf Traps.
--
--  Define groups in rosMgmtOspfNotifications
--
    rosMgmtOspfTraps          OBJECT IDENTIFIER ::= { rosMgmtOspfNotifications 0 }
      
   rosMgmtOspfIfStateChange NOTIFICATION-TYPE
        OBJECTS { 
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfIfIpAddress,
                    rosMgmtOspfAddressLessIf,
                    rosMgmtOspfIfState   -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfIfStateChange trap signifies that there
           has been a change in the state of a non-virtual
           OSPF interface. This trap should  be  generated
           when  the interface state regresses (e.g., goes
           from Dr to Down) or progresses  to  a  terminal
           state  (i.e.,  Point-to-Point, DR Other, Dr, or
           Backup)."
   ::= { rosMgmtOspfTraps 1 }


    rosMgmtOspfVirtIfStateChange NOTIFICATION-TYPE
        OBJECTS {   
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtIfAreaId,
                    rosMgmtOspfVirtIfNeighbor,
                    rosMgmtOspfVirtIfState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfIfStateChange trap signifies that there
           has  been a change in the state of an OSPF vir-
           tual interface.
           This trap should be generated when  the  inter-
           face  state  regresses  (e.g., goes from Point-
           to-Point to Down) or progresses to  a  terminal
           state (i.e., Point-to-Point)."
   ::= { rosMgmtOspfTraps 2 }  
    
       rosMgmtOspfNbrStateChange NOTIFICATION-TYPE
        OBJECTS {   
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfNbrIpAddr,
                    rosMgmtOspfNbrAddressLessIndex,
                    rosMgmtOspfNbrRtrId,
                    rosMgmtOspfNbrState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An  rosMgmtOspfNbrStateChange  trap  signifies   that
           there  has been a change in the state of a non-
           virtual OSPF neighbor.   This  trap  should  be
           generated  when  the  neighbor  state regresses
           (e.g., goes from Attempt or Full  to  1-Way  or
           Down)  or progresses to a terminal state (e.g.,
           2-Way or Full).  When an  neighbor  transitions
           from  or  to Full on non-broadcast multi-access
           and broadcast networks, the trap should be gen-
           erated  by the designated router.  A designated
           router transitioning to Down will be  noted  by
           rosMgmtOspfIfStateChange."
   ::= { rosMgmtOspfTraps 3 }

    rosMgmtOspfVirtNbrStateChange NOTIFICATION-TYPE
        OBJECTS {   
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtNbrArea,
                    rosMgmtOspfVirtNbrRtrId,
                    rosMgmtOspfVirtNbrState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfIfStateChange trap signifies that there
           has  been a change in the state of an OSPF vir-
           tual neighbor.  This trap should  be  generated
           when  the  neighbor state regresses (e.g., goes
           from Attempt or  Full  to  1-Way  or  Down)  or
           progresses to a terminal state (e.g., Full)."
   ::= { rosMgmtOspfTraps 4 }

    rosMgmtOspfIfConfigError NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfIfIpAddress,
                    rosMgmtOspfAddressLessIf,
                    rosMgmtOspfPacketSrc,  -- The source IP address
                    rosMgmtOspfConfigErrorType, -- Type of error
                    rosMgmtOspfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfIfConfigError  trap  signifies  that  a
           packet  has  been received on a non-virtual in-
           terface  from  a  router  whose   configuration
           parameters  conflict  with this router's confi-
           guration parameters.  Note that the  event  op-
           tionMismatch  should  cause  a  trap only if it
           prevents an adjacency from forming."
   ::= { rosMgmtOspfTraps 5 }

    rosMgmtOspfVirtIfConfigError NOTIFICATION-TYPE
        OBJECTS {   
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtIfAreaId,
                    rosMgmtOspfVirtIfNeighbor,
                    rosMgmtOspfConfigErrorType, -- Type of error
                    rosMgmtOspfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfConfigError trap signifies that a pack-
           et  has  been  received  on a virtual interface
           from a router  whose  configuration  parameters
           conflict   with   this  router's  configuration
           parameters.  Note that the event optionMismatch
           should  cause a trap only if it prevents an ad-
           jacency from forming."
   ::= { rosMgmtOspfTraps 6 }


    rosMgmtOspfIfAuthFailure NOTIFICATION-TYPE
        OBJECTS {   
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfIfIpAddress,
                    rosMgmtOspfAddressLessIf,
                    rosMgmtOspfPacketSrc,  -- The source IP address
                    rosMgmtOspfConfigErrorType, -- authTypeMismatch or
                                         -- authFailure
                    rosMgmtOspfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfIfAuthFailure  trap  signifies  that  a
           packet  has  been received on a non-virtual in-
           terface from a router whose authentication  key
           or  authentication  type  conflicts  with  this
           router's authentication key  or  authentication
           type."
   ::= { rosMgmtOspfTraps 7 }


    rosMgmtOspfVirtIfAuthFailure NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtIfAreaId,
                    rosMgmtOspfVirtIfNeighbor,
                    rosMgmtOspfConfigErrorType, -- authTypeMismatch or
                                         -- authFailure
                    rosMgmtOspfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfVirtIfAuthFailure trap signifies that a
           packet has been received on a virtual interface
           from a router whose authentication key  or  au-
           thentication  type conflicts with this router's
           authentication key or authentication type."
   ::= { rosMgmtOspfTraps 8 }

    rosMgmtOspfIfRxBadPacket NOTIFICATION-TYPE
        OBJECTS {     
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfIfIpAddress,
                    rosMgmtOspfAddressLessIf,
                    rosMgmtOspfPacketSrc,  -- The source IP address
                    rosMgmtOspfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfIfRxBadPacket trap  signifies  that  an
           OSPF  packet has been received on a non-virtual
           interface that cannot be parsed."
   ::= { rosMgmtOspfTraps 9 }

    rosMgmtOspfVirtIfRxBadPacket NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtIfAreaId,
                    rosMgmtOspfVirtIfNeighbor,
                    rosMgmtOspfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfRxBadPacket trap signifies that an OSPF
           packet has been received on a virtual interface
           that cannot be parsed."
   ::= { rosMgmtOspfTraps 10 }


    rosMgmtOspfTxRetransmit NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfIfIpAddress,
                    rosMgmtOspfAddressLessIf,
                    rosMgmtOspfNbrRtrId, -- Destination
                    rosMgmtOspfPacketType,
                    rosMgmtOspfLsdbType,
                    rosMgmtOspfLsdbLsId,
                    rosMgmtOspfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfTxRetransmit  trap  signifies  than  an
           OSPF  packet  has  been retransmitted on a non-
           virtual interface.  All packets that may be re-
           transmitted  are associated with an LSDB entry.
           The LS type, LS ID, and Router ID are  used  to
           identify the LSDB entry."
   ::= { rosMgmtOspfTraps 11 }


    rosMgmtOspfVirtIfTxRetransmit NOTIFICATION-TYPE
        OBJECTS {      
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtIfAreaId,
                    rosMgmtOspfVirtIfNeighbor,
                    rosMgmtOspfPacketType,
                    rosMgmtOspfLsdbType,
                    rosMgmtOspfLsdbLsId,
                    rosMgmtOspfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfTxRetransmit  trap  signifies  than  an
           OSPF packet has been retransmitted on a virtual
           interface.  All packets that may be retransmit-
           ted  are  associated with an LSDB entry. The LS
           type, LS ID, and Router ID are used to identify
           the LSDB entry."
   ::= { rosMgmtOspfTraps 12 }

    rosMgmtOspfOriginateLsa NOTIFICATION-TYPE
        OBJECTS {   
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                    rosMgmtOspfLsdbType,
                    rosMgmtOspfLsdbLsId,
                    rosMgmtOspfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfOriginateLsa trap signifies that a  new
           LSA  has  been originated by this router.  This
           trap should not be invoked for simple refreshes
           of  LSAs  (which happesn every 30 minutes), but
           instead will only be invoked  when  an  LSA  is
           (re)originated due to a topology change.  Addi-
           tionally, this trap does not include LSAs  that
           are  being  flushed  because  they have reached
           MaxAge."
   ::= { rosMgmtOspfTraps 13 }

    rosMgmtOspfMaxAgeLsa NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                    rosMgmtOspfLsdbType,
                    rosMgmtOspfLsdbLsId,
                    rosMgmtOspfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfMaxAgeLsa trap signifies  that  one  of
           the LSA in the router's link-state database has
           aged to MaxAge."
   ::= { rosMgmtOspfTraps 14 }

    rosMgmtOspfLsdbOverflow NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfExtLsdbLimit
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfLsdbOverflow trap  signifies  that  the
           number of LSAs in the router's link-state data-
           base has exceeded rosMgmtOspfExtLsdbLimit."
   ::= { rosMgmtOspfTraps 15 }


    rosMgmtOspfLsdbApproachingOverflow NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfExtLsdbLimit
                  }
        STATUS             current
        DESCRIPTION
           "An rosMgmtOspfLsdbApproachingOverflow trap  signifies
           that  the  number of LSAs in the router's link-
           state database has exceeded ninety  percent  of
           rosMgmtOspfExtLsdbLimit."
   ::= { rosMgmtOspfTraps 16 }     
   
    rosMgmtOspfIfKeyValid NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfIfIpAddress,
                    rosMgmtOspfAddressLessIf,
                    rosMgmtOspfIfAuthKeyChain
                  }
        STATUS             current
        DESCRIPTION
           "This trap will notify the network manager that some key 
           associated with an interface recovers valid."
   ::= { rosMgmtOspfTraps 17 }


    rosMgmtOspfIfLastKeyExpiration NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfIfIpAddress,
                    rosMgmtOspfAddressLessIf, 
                    rosMgmtOspfIfAuthKeyChain
                  }
        STATUS             current
        DESCRIPTION
           "This trap will notify the network manager that the last 
 	       key associated with an interface expires."
   ::= { rosMgmtOspfTraps 18 }      
   
    rosMgmtOspfVirtIfKeyValid NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtIfAreaId,
                    rosMgmtOspfVirtIfNeighbor, 
                    rosMgmtOspfVirtIfAuthKeyChain
                  }
        STATUS             current
        DESCRIPTION
           "This trap will notify the network manager that some key 
           associated with an virtual link recovers valid."
   ::= { rosMgmtOspfTraps 19 }


    rosMgmtOspfVirtIfLastKeyExpiration NOTIFICATION-TYPE
        OBJECTS {    
                    rosMgmtOspfProcessId,
                    rosMgmtOspfRouterId, -- The originator of the trap
                    rosMgmtOspfVirtIfAreaId,
                    rosMgmtOspfVirtIfNeighbor,
                    rosMgmtOspfVirtIfAuthKeyChain
                  }
        STATUS             current
        DESCRIPTION
           "This trap will notify the network manager that the last 
 	       key associated with an virtual link expires."
   ::= { rosMgmtOspfTraps 20 } 
   
     rosMgmtOspfRedistributeOverflow NOTIFICATION-TYPE
        OBJECTS {    
                   rosMgmtOspfProcessId,
                   rosMgmtOspfRedistributeProtocol, -- The originator of the trap
                   rosMgmtOspfRedistributeProcessId,
                   rosMgmtOspfRedistributeRouteLimit
                  }
        STATUS             current
        DESCRIPTION
           "This trap should  be  generated when  the number of 
            redistribute routes exceeds limit."
   ::= { rosMgmtOspfTraps 21 }
 
      rosMgmtOspfRedistributeNotOverflow NOTIFICATION-TYPE
        OBJECTS {    
                   rosMgmtOspfProcessId,
                   rosMgmtOspfRedistributeProtocol, -- The originator of the trap
                   rosMgmtOspfRedistributeProcessId,
                   rosMgmtOspfRedistributeRouteLimit
                  }
        STATUS             current
        DESCRIPTION
           "This trap should  be  generated when  the number of 
            redistribute routes  drop to limit."
   ::= { rosMgmtOspfTraps 22 }

--
--   rosMgmtOspfObjects 
--   
--   This group defines all the objects related to Ospf.

--  Define groups in rosMgmtOspfObjects
--    rosMgmtOspfGlobalTable             OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 1 }
--    rosMgmtOspfAreaTable               OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 2 } 
--    rosMgmtOspfNetWorkTable            OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 3 }
--    rosMgmtOspfStubAreaTable           OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 4 }
--    rosMgmtOspfNssaAreaTable           OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 5 }         
--    rosMgmtOspfIfTable                 OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 6 }
--    rosMgmtOspfVirtIfTable             OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 7 }
--    rosMgmtOspfNbrTable                OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 8 }
--    rosMgmtOspfNbmaCfgNbrTable         OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 9 }
--    rosMgmtOspfVirtNbrTable            OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 10}
--    rosMgmtOspfAreaAggregateTable      OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 11}
--    rosMgmtOspfExternalAggregateTable  OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 12}  
--    rosMgmtOspfLsdbTable               OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 13}
--    rosMgmtOspfAsLsdbTable             OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 14}
--    rosMgmtOspfAreaLsaCountTable       OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 15}
--    rosMgmtOspfRedistributeTable       OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 16}
--    rosMgmtOspfDefaultInfoTable        OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 17} 
--    rosMgmtOspfPacketIoStatisTable     OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 18}
--    rosMgmtOspfRouteTable              OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 19}
--    rosMgmtOspfBdrRouteTable           OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 20}    
--    rosMgmtOspfDistributeListGroup     OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 21}  
--    rosMgmtOspfDNBitOperationTable     OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 22}
--
--
--  rosMgmtOspfGlobalTable 
--
--  This Table defines the Global Vars.
--
 rosMgmtOspfGlobalTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfGlobalEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "OSPF global Vars for every ospf process."
       ::= { rosMgmtOspfObjects 1 }

  rosMgmtOspfGlobalEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfGlobalEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "OSPF global Vars for every ospf process."
       INDEX { rosMgmtOspfProcessId }
       ::= { rosMgmtOspfGlobalTable 1 }

  RosMgmtOspfGlobalEntry ::=
        SEQUENCE {
           rosMgmtOspfProcessId
              ProcessID,
           rosMgmtOspfRouterId
              RouterID,
           rosMgmtOspfAdminStat
              EnableVar,
           rosMgmtOspfVersionNumber
              INTEGER,
           rosMgmtOspfAreaBdrRtrStatus
              TruthValue,
           rosMgmtOspfASBdrRtrStatus
              TruthValue,
           rosMgmtOspfExternLsaCount
              Gauge32,
           rosMgmtOspfExternLsaCksumSum
              Integer32,
           rosMgmtOspfOriginateNewLsas
              Counter32,
           rosMgmtOspfRxNewLsas
              Counter32,
           rosMgmtOspfExtLsdbLimit
              Integer32,
           rosMgmtOspfExitOverflowInterval
              PositiveInteger,
           rosMgmtOspfReferenceBandwidth
              Unsigned32,   
           rosMgmtOspfAsLsaCount  
              Gauge32,
           rosMgmtOspfAsLsaCksumSum   
              Unsigned32,
           rosMgmtOspfStubRouterSupport   
              TruthValue,
           rosMgmtOspfStubRouterAdvertisement   
              INTEGER,
           rosMgmtOspfAdminDistance 
              Integer32, 
           rosMgmtOspfSpfInterval   
              Integer32,   
           rosMgmtOspfReset   
              INTEGER,
           rosMgmtOspfExportMetric   
              Integer32,
           rosMgmtOspfExportTag   
              Integer32,
           rosMgmtOspfExportType   
              INTEGER,
           rosMgmtOspfNetCounts   
              Integer32,
           rosMgmtOspfAreaCounts   
              Integer32,
           rosMgmtOspfNssaAreaCounts
              Integer32,           
           rosMgmtOspfSpfCounts
              Integer32, 
           rosMgmtOspfGlobalStatus   
              RowStatus,
           rosMgmtOspfRedistributeRouteLimit 
              Integer32, 
           rosMgmtOspfDistanceIntra
              Integer32,
           rosMgmtOspfDistanceInter
              Integer32, 
           rosMgmtOspfDistanceExtern
              Integer32, 
           rosMgmtOspfRfc1583Compatible
              TruthValue,  
           rosMgmtOspfSpfHode 
              Integer32,
	       rosMgmtOspfBfdAllItfs
		       TruthValue,
           rosMgmtOspfOpaqueCapability
              TruthValue,
           rosMgmtOspfTECapability
              TruthValue,  
           rosMgmtOspfTEAreaID
              IpAddress,
           rosMgmtOspfTERouterId
              RouterID, 
           rosMgmtOspfGRCapability
              INTEGER,
           rosMgmtOspfGRPeriod  
              Integer32,
           rosMgmtOspfGRHelper
              INTEGER,  
           rosMgmtOspfGRHelperMaxPeriod 
              Integer32,     
           rosMgmtOspfMaximumLoadBalancing 
              Integer32,  
           rosMgmtOspfMaxMetric   
              Integer32,   
           rosMgmtOspfMaxMetricType   
              Integer32, 
           rosMgmtOspfMaxMetricTime
              Integer32, 
     	   rosMgmtOspfMaxMetricTypeStartup
              Integer32,
           rosMgmtOspfLsdbOverflowLimit     
              Integer32,   
           rosMgmtOspfTrafficAdjustType
              INTEGER, 
           rosMgmtOspfRouteTagValue
              Unsigned32,
           rosMgmtOspfRouteTagCheckDisable
              TruthValue,
           rosMgmtOspfDNBitSetDisableSummary    
              TruthValue,
           rosMgmtOspfDNBitSetDisableAse
              TruthValue,
           rosMgmtOspfDNBitSetDisableNssa
              TruthValue,
           rosMgmtOspfDNBitCheckDisableSummary
              TruthValue,  
           rosMgmtOspfDNBitCheckDisableAse
              TruthValue,
           rosMgmtOspfDNBitCheckDisableNssa
              TruthValue,
           rosMgmtOspfSpfMilliInterval   
              Integer32,  
           rosMgmtOspfSpfMilliHode 
              Integer32,
           rosMgmtOspfLoopFreeAlt
              TruthValue
         }    

  rosMgmtOspfProcessId OBJECT-TYPE
       SYNTAX       ProcessID
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "A 32-bit unsigned integer uniquely identifying the
          ospf process."
       ::= { rosMgmtOspfGlobalEntry 1 }
         
  
  rosMgmtOspfRouterId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "A 32-bit integer uniquely identifying the
          router in the Autonomous System.
          By convention, to ensure uniqueness, this
          should default to the value of one of the
          router's IP interface addresses.

          This object is persistent and when written
          the entity SHOULD save the change to non-volatile storage."
       REFERENCE
          "OSPF Version 2, C.1 Global parameters"
       ::= { rosMgmtOspfGlobalEntry 2 }

  rosMgmtOspfAdminStat OBJECT-TYPE
       SYNTAX       EnableVar
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The administrative status of OSPF in the
          router.  The value 'enabled' denotes that the
          OSPF Process is active on at least one interface;
          'disabled' disables it on all interfaces.

          This object is persistent and when written
          the entity SHOULD save the change to non-volatile storage."  
       DEFVAL { disable }
       ::= { rosMgmtOspfGlobalEntry 3 }

  rosMgmtOspfVersionNumber OBJECT-TYPE
       SYNTAX       INTEGER { version2 (2) }
       MAX-ACCESS   read-only
       STATUS       current

       DESCRIPTION
          "The current version number of the OSPF protocol is 2."
       REFERENCE
          "OSPF Version 2, Title"
       ::= { rosMgmtOspfGlobalEntry 4 }

  rosMgmtOspfAreaBdrRtrStatus OBJECT-TYPE
       SYNTAX       TruthValue
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "A flag to note whether this router is an Area
          Border Router."
       REFERENCE
          "OSPF Version 2, Section 3 Splitting the AS into
          Areas"
       ::= { rosMgmtOspfGlobalEntry 5 }

  rosMgmtOspfASBdrRtrStatus OBJECT-TYPE
       SYNTAX       TruthValue
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "A flag to note whether this router is configured as
           an Autonomous System Border Router.

           This object is persistent and when written the
           entity SHOULD save the change to non-volatile storage."
       REFERENCE
          "OSPF Version 2, Section 3.3 Classification of
          routers"
       ::= { rosMgmtOspfGlobalEntry 6 }

  rosMgmtOspfExternLsaCount OBJECT-TYPE
        SYNTAX       Gauge32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The number of external (LS type-5) link state
           advertisements in the link state database."
        REFERENCE
           "OSPF Version 2, Appendix A.4.5 AS external link
           advertisements"
        ::= { rosMgmtOspfGlobalEntry 7 }

  rosMgmtOspfExternLsaCksumSum OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only

        STATUS       current
        DESCRIPTION
           "The 32-bit sum of the LS checksums of
           the external link state advertisements
           contained in the link state database.  This sum
           can be used to determine if there has been a
           change in a router's link state database and
           to compare the link state database of two
           routers.  The value should be treated as unsigned
           when comparing two sums of checksums."
        ::= { rosMgmtOspfGlobalEntry 8 }

   rosMgmtOspfOriginateNewLsas OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of new link state advertisements
          that have been originated.  This number is
          incremented each time the router originates a new
          LSA.

          Discontinuities in the value of this counter can
          occur at re-initialization of the management system,
          and at other times as indicated by the value of
          ospfDiscontinuityTime."
        ::= { rosMgmtOspfGlobalEntry 9 }

  rosMgmtOspfRxNewLsas OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION

          "The number of link state advertisements received
          that are determined to be new instantiations.
          This number does not include newer instantiations
          of self-originated link state advertisements.

          Discontinuities in the value of this counter can
          occur at re-initialization of the management system,
          and at other times as indicated by the value of
          ospfDiscontinuityTime."
       ::= { rosMgmtOspfGlobalEntry 10 }

  rosMgmtOspfExtLsdbLimit OBJECT-TYPE
       SYNTAX       Integer32 (-1..'7FFFFFFF'h)
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The maximum number of non-default
          AS-external LSAs entries that can be stored in the
          link state database.  If the value is -1, then
          there is no limit.

          When the number of non-default AS-external LSAs
          in a router's link state database reaches
          rosMgmtOspfExtLsdbLimit, the router enters
          overflow state.  The router never holds more than
          rosMgmtOspfExtLsdbLimit non-default AS-external LSAs
          in its database.  rosMgmtOspfExtLsdbLimit MUST be set
          identically in all routers attached to the OSPF
          backbone and/or any regular OSPF area (i.e.,
          OSPF stub areas and NSSAs are excluded).

          This object is persistent and when written
          the entity SHOULD save the change to non-volatile
          storage."
        DEFVAL { -1 }
        ::= { rosMgmtOspfGlobalEntry 11 }

  rosMgmtOspfExitOverflowInterval OBJECT-TYPE
       SYNTAX       PositiveInteger
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of seconds that, after entering
          OverflowState, a router will attempt to leave
          OverflowState.  This allows the router to again
          originate non-default AS-external LSAs.  When
          set to 0, the router will not leave
          overflow state until restarted.

          This object is persistent and when written
          the entity SHOULD save the change to non-volatile
          storage."
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 12 }

  rosMgmtOspfReferenceBandwidth OBJECT-TYPE
       SYNTAX       Unsigned32(1..4296967)
       UNITS        "millionbits per second"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Reference bandwidth in millionbits/second for
          calculating default interface metrics.  The
          default value is 100 MBPS.

          This object is persistent and when written
          the entity SHOULD save the change to non-volatile
          storage."
       ::= { rosMgmtOspfGlobalEntry 13 }

  rosMgmtOspfAsLsaCount OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current

       DESCRIPTION
           "The number of AS-scope link state
           advertisements in the AS-scope link state database."
       ::= { rosMgmtOspfGlobalEntry 14 }

  rosMgmtOspfAsLsaCksumSum OBJECT-TYPE
       SYNTAX       Unsigned32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "The 32-bit unsigned sum of the LS checksums of
           the AS link state advertisements contained in the AS-scope
           link state database.  This sum can be used to determine
           if there has been a change in a router's AS-scope link
           state database, and to compare the AS-scope link state
           database of two routers."
       ::= { rosMgmtOspfGlobalEntry 15 }

  rosMgmtOspfStubRouterSupport OBJECT-TYPE
       SYNTAX       TruthValue
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "The router's support for stub router functionality."
       REFERENCE
           "OSPF Stub Router Advertisement"
       ::= { rosMgmtOspfGlobalEntry 16 }

  rosMgmtOspfStubRouterAdvertisement OBJECT-TYPE
       SYNTAX       INTEGER {
                          doNotAdvertise (1),
                          advertise(2)
                          }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "This object controls the advertisement of
           stub router LSAs by the router.  The value
           doNotAdvertise will result in the advertisement
           of a standard router LSA and is the default value.

           This object is persistent and when written
           the entity SHOULD save the change to non-volatile
           storage."
       ::= { rosMgmtOspfGlobalEntry 17 }   
       
  rosMgmtOspfAdminDistance OBJECT-TYPE
       SYNTAX       Integer32 (0..255)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The administrative distance of ospf process. 0 represents
           administration distance of ospf is not set."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 18 }  
        
  rosMgmtOspfSpfInterval OBJECT-TYPE
       SYNTAX       Integer32 (1..600)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Delay(s) between receiving a change to SPF calculation."     
       DEFVAL { 2 }
       ::= { rosMgmtOspfGlobalEntry 19 }  
 
  rosMgmtOspfReset OBJECT-TYPE
       SYNTAX       INTEGER {
                               none (0),
                               general(1),
                               gr(2)
                            }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Reset ospf process by process ID."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 20 }   

  rosMgmtOspfExportMetric OBJECT-TYPE
       SYNTAX       Integer32 (0.. 16777215)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The default metric of imporing route into ospf process."     
       DEFVAL { 20 }
       ::= { rosMgmtOspfGlobalEntry 21 }

  rosMgmtOspfExportTag OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-create
       STATUS       current      
       DESCRIPTION
           "The default tag of importing route into ospf process."
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 22 }

  rosMgmtOspfExportType OBJECT-TYPE
       SYNTAX       INTEGER {
                      type1 (1),
                      type2 (2)
                      }                             
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The default type of importing route into ospf process."     
       DEFVAL { type2 }
       ::= { rosMgmtOspfGlobalEntry 23 }

  rosMgmtOspfNetCounts OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "It bas been used to describe the total number of networks in OSPF process."     
       ::= { rosMgmtOspfGlobalEntry 24 }

  rosMgmtOspfAreaCounts OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "It bas been used to describe the number of areas in OSPF process."     
       ::= { rosMgmtOspfGlobalEntry 25 }

  rosMgmtOspfNssaAreaCounts OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "It bas been used to describe the number of NSSA areas in OSPF process."     
       ::= { rosMgmtOspfGlobalEntry 26 }

  rosMgmtOspfSpfCounts OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "It bas been used to describe the total number of SPF calculation in OSPF process. "     
       ::= { rosMgmtOspfGlobalEntry 27 }

  rosMgmtOspfGlobalStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfGlobalEntry 28 }   
       
  rosMgmtOspfRedistributeRouteLimit OBJECT-TYPE
       SYNTAX       Integer32(-1|1..65535) 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Specify the max number in importing route.-1 represents 
		  the max number in importing route are not set." 
       ::= { rosMgmtOspfGlobalEntry 29 }      

  rosMgmtOspfDistanceIntra OBJECT-TYPE
       SYNTAX       Integer32 (0..255)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The administrative distance of ospf Intra-area routes. 0 represents 
           administration distance of ospf Intra-area routes are not set."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 30 }  

  rosMgmtOspfDistanceInter OBJECT-TYPE
       SYNTAX       Integer32 (0..255)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The administrative distance of ospf Inter-area routes. 0 represents
           administration distance of ospf Inter-area routes are not set."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 31 }  

  rosMgmtOspfDistanceExtern OBJECT-TYPE
       SYNTAX       Integer32 (0..255)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The administrative distance of ospf external routes. 0 represents
           administration distance of ospf external routes are not set."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 32 }  

  rosMgmtOspfRfc1583Compatible OBJECT-TYPE
       SYNTAX       TruthValue  
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "ospf process compatible with RFC 1583."     
       DEFVAL { true }
       ::= { rosMgmtOspfGlobalEntry 33 }  

  rosMgmtOspfSpfHode OBJECT-TYPE
       SYNTAX       Integer32 (1..600)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Hold time (s) between consecutive SPF calculations."     
       DEFVAL { 3 }
       ::= { rosMgmtOspfGlobalEntry 34 }  

  rosMgmtOspfBfdAllItfs OBJECT-TYPE
       SYNTAX       TruthValue  
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Ospf process indicate global BFD."     
       DEFVAL { false }
       ::= { rosMgmtOspfGlobalEntry 35 }  

  rosMgmtOspfOpaqueCapability OBJECT-TYPE
       SYNTAX       TruthValue  
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Ospf process indicate opaque capability."     
       DEFVAL { false }
       ::= { rosMgmtOspfGlobalEntry 36 }  

  rosMgmtOspfTECapability OBJECT-TYPE
       SYNTAX       TruthValue  
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "Ospf process indicate TE capability."     
       DEFVAL { false }
       ::= { rosMgmtOspfGlobalEntry 37 }   
       
   rosMgmtOspfTEAreaID OBJECT-TYPE
      SYNTAX       IpAddress
      MAX-ACCESS   read-only
      
      STATUS       deprecated
      DESCRIPTION
         "A 32-bit integer uniquely identifying an area.
         Area ID 0.0.0.0 is used for the OSPF backbone."
      REFERENCE
         "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { rosMgmtOspfGlobalEntry 38 }
      
   rosMgmtOspfTERouterId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "A 32-bit integer uniquely identifying the 
	    TE router in the area.By convention,
	    to ensure uniqueness,this should default to 
	    the value of the router-id of ospf precess."
       REFERENCE
          "OSPF Version 2, C.1 Global parameters"
       ::= { rosMgmtOspfGlobalEntry 39 }  
       
   rosMgmtOspfGRCapability OBJECT-TYPE
       SYNTAX       INTEGER {
                               graceful (1),
                               signaling (2),
                               never(3)
                          }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Use this command to enable OSPF graceful restart 
           or restart signaling. If a router is not restart-enabled, 
           it cannot enter graceful restart mode and act as a helper."
       ::= { rosMgmtOspfGlobalEntry 40 }            
     
   rosMgmtOspfGRPeriod OBJECT-TYPE
       SYNTAX       Integer32 (1..1800)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           " The grace period for the restarting  router."     
       DEFVAL { 120 }
       ::= { rosMgmtOspfGlobalEntry 41 }  
       
   rosMgmtOspfGRHelper OBJECT-TYPE
       SYNTAX       INTEGER {
                               general (0),
                               never (1),
                               plannedonly (2)
                          }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "the helper behavior for graceful restart."
       ::= { rosMgmtOspfGlobalEntry 42 }     
    

   rosMgmtOspfGRHelperMaxPeriod OBJECT-TYPE
       SYNTAX       Integer32 (1..1800)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Help only if received grace-period is less than this value."     
       DEFVAL { 1800 }
       ::= { rosMgmtOspfGlobalEntry 43 }     
       
   rosMgmtOspfMaximumLoadBalancing OBJECT-TYPE
       SYNTAX       Integer32 (1..8)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Maximum load-balancing paths for OSPF."     
       DEFVAL { 1 }
       ::= { rosMgmtOspfGlobalEntry 44 }     
                                              
    rosMgmtOspfMaxMetric OBJECT-TYPE
       SYNTAX       Integer32 (1..2)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The router announces itself as a stub router."     
       DEFVAL { 2 }
       ::= { rosMgmtOspfGlobalEntry 45 }        
       
    rosMgmtOspfMaxMetricType OBJECT-TYPE
       SYNTAX       Integer32 (0..1)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The stub router will change the cost include stub link."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 46 }  
       
        
   rosMgmtOspfMaxMetricTime OBJECT-TYPE
       SYNTAX       Integer32 (0 | 90..86400)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Time, in seconds, router-LSAs are originated with max-metric."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 47 }   
       
   rosMgmtOspfMaxMetricTypeStartup  OBJECT-TYPE
       SYNTAX       Integer32 (0..1)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Set maximum metric for stub links in router-LSAs on start up."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 48 }     
       
   rosMgmtOspfLsdbOverflowLimit OBJECT-TYPE
       SYNTAX       Integer32 (0..1000000)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Set the OSPF link-state database overflow limit."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 49 }       
       
   rosMgmtOspfTrafficAdjustType OBJECT-TYPE
       SYNTAX   INTEGER {  
                          none (0),
                          shortcut (1),
                          fa (2)
                        }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Set the OSPF traffic adjust feature."     
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 50 }     
       
   rosMgmtOspfRouteTagValue OBJECT-TYPE
       SYNTAX       Unsigned32
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Set tag of the import route whcih belongs to the vpn process."
       ::= { rosMgmtOspfGlobalEntry 51 }  
       
   rosMgmtOspfRouteTagCheckDisable OBJECT-TYPE
       SYNTAX       TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Block the inclusion of Tag whcih belongs to the vpn process."
       ::= { rosMgmtOspfGlobalEntry 52 }  
       
             
   rosMgmtOspfDNBitSetDisableSummary OBJECT-TYPE
       SYNTAX   TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Configure the DN bit in an Summary LSA. The DN bit is set in an Summary LSA by default."     
       ::= { rosMgmtOspfGlobalEntry 53 } 
       
       
   rosMgmtOspfDNBitSetDisableAse OBJECT-TYPE
       SYNTAX   TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Configure the DN bit in an as-external-LSA. The DN bit is set in an as-external-LSA by default."     
       ::= { rosMgmtOspfGlobalEntry 54 }
       
       
   rosMgmtOspfDNBitSetDisableNssa OBJECT-TYPE
       SYNTAX   TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Configure the DN bit in an Nssa LSA. The DN bit is set in an Nssa LSA by default."     
       ::= { rosMgmtOspfGlobalEntry 55 }
                 
   rosMgmtOspfDNBitCheckDisableSummary OBJECT-TYPE
       SYNTAX   TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Check the DN bit in an Summary LSA. The DN bit check is enabled in an Summary LSA by default."     
       ::= { rosMgmtOspfGlobalEntry 56 }  
       
   rosMgmtOspfDNBitCheckDisableAse OBJECT-TYPE
       SYNTAX   TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Check the DN bit in an an as-external-LSA. The DN bit check is enabled in an an as-external-LSA by default."     
       ::= { rosMgmtOspfGlobalEntry 57 } 
       
              
   rosMgmtOspfDNBitCheckDisableNssa OBJECT-TYPE
       SYNTAX   TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Check the DN bit in an Nssa LSA. The DN bit check is enabled in an Nssa LSA by default."     
       ::= { rosMgmtOspfGlobalEntry 58 }       
       
       
  rosMgmtOspfSpfMilliInterval OBJECT-TYPE
       SYNTAX       Integer32 (0..600000)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Delay(ms) between receiving a change to SPF calculation." 
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 59 } 
       
       
  rosMgmtOspfSpfMilliHode OBJECT-TYPE
       SYNTAX       Integer32 (0..600000)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Hold time (ms) between consecutive SPF calculations."   
       DEFVAL { 0 }
       ::= { rosMgmtOspfGlobalEntry 60 }        
       
  rosMgmtOspfLoopFreeAlt  OBJECT-TYPE
       SYNTAX   TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "Enable OSPF Loop-Free Alternate(LFA)."     
       ::= { rosMgmtOspfGlobalEntry 61 }  

     
--  rosMgmtOspfAreaTable
--     The OSPF Area Table contains information
--     regarding the various areas.
  rosMgmtOspfAreaTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfAreaEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Information describing the configured parameters and
          cumulative statistics of the router's attached areas.
          The interfaces and virtual links are configured
          as part of these areas.  Area 0.0.0.0, by definition,
          is the backbone area."
       REFERENCE
          "OSPF Version 2, Section 6 The Area Data Structure"
       ::= { rosMgmtOspfObjects 2 }

  rosMgmtOspfAreaEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfAreaEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Information describing the configured parameters and
          cumulative statistics of one of the router's attached areas.
          The interfaces and virtual links are configured as part of
          these areas.  Area 0.0.0.0, by definition, is the backbone
          area.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfAreaId }
       ::= { rosMgmtOspfAreaTable 1 }

  RosMgmtOspfAreaEntry ::=
        SEQUENCE {
           rosMgmtOspfAreaId
              AreaID,
           rosMgmtOspfAuthType
              OspfAuthenticationType,
           rosMgmtOspfImportAsExtern
              INTEGER,
           rosMgmtOspfSpfRuns
              Counter32,
           rosMgmtOspfAreaBdrRtrCount
              Gauge32,
           rosMgmtOspfAsBdrRtrCount
              Gauge32,
           rosMgmtOspfAreaLsaCount
              Gauge32,
           rosMgmtOspfAreaLsaCksumSum
              Integer32,
           rosMgmtOspfAreaSummary
              INTEGER,
           rosMgmtOspfAreaNssaTranslatorRole
              INTEGER,
           rosMgmtOspfAreaNssaTranslatorState
              INTEGER,
           rosMgmtOspfAreaNssaTranslatorStabilityInterval
              PositiveInteger,
           rosMgmtOspfAreaNssaTranslatorEvents
              Counter32,     
           rosMgmtOspfAreaDefaultCost
              BigMetric,
           rosMgmtOspfAreaType
              INTEGER,
           rosMgmtOspfAreaStatus
              RowStatus,
           rosMgmtOspfAreaFilterInIpPrefixListName 
              OCTET STRING,  
           rosMgmtOspfAreaFilterOutIpPrefixListName
              OCTET STRING,
           rosMgmtOspfAreaTeCapability
              TruthValue
           }

  rosMgmtOspfAreaId OBJECT-TYPE
       SYNTAX       AreaID
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "A 32-bit integer uniquely identifying an area.
          Area ID 0.0.0.0 is used for the OSPF backbone."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
       ::= { rosMgmtOspfAreaEntry 1 }

  rosMgmtOspfAuthType OBJECT-TYPE
       SYNTAX       OspfAuthenticationType
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The authentication type specified for an area."
       REFERENCE
          "OSPF Version 2, Appendix D Authentication"
       DEFVAL { none } -- no authentication, by default
       ::= { rosMgmtOspfAreaEntry 2 }

  rosMgmtOspfImportAsExtern OBJECT-TYPE
       SYNTAX       INTEGER {
                      importExternal (1),
                      importNoExternal (2),
                      importNssa (3)
                      }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "Indicates if an area is a stub area, NSSA, or standard
          area.  Type-5 AS-external LSAs and type-11 Opaque LSAs are
          not imported into stub areas or NSSAs.  NSSAs import
          AS-external data as type-7 LSAs"
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
       DEFVAL { importExternal }
       ::= { rosMgmtOspfAreaEntry 3 }

  rosMgmtOspfSpfRuns OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of times that the intra-area route
          table has been calculated using this area's
          link state database.  This is typically done
          using Dijkstra's algorithm.

          Discontinuities in the value of this counter can occur
          at re-initialization of the management system, and at other
          times as indicated by the value of ospfDiscontinuityTime."
       ::= { rosMgmtOspfAreaEntry 4 }

  rosMgmtOspfAreaBdrRtrCount OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The total number of Area Border Routers reachable
          within this area.  This is initially zero and is
          calculated in each Shortest Path First (SPF) pass."

       ::= { rosMgmtOspfAreaEntry 5 }

  rosMgmtOspfAsBdrRtrCount OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The total number of Autonomous System Border
          Routers reachable within this area.  This is
          initially zero and is calculated in each SPF
          pass."
       ::= { rosMgmtOspfAreaEntry 6 }

  rosMgmtOspfAreaLsaCount OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The total number of link state advertisements
          in this area's link state database, excluding
          AS-external LSAs."
       ::= { rosMgmtOspfAreaEntry 7 }

  rosMgmtOspfAreaLsaCksumSum OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The 32-bit sum of the link state
          advertisements' LS checksums contained in this
          area's link state database.  This sum excludes
          external (LS type-5) link state advertisements.
          The sum can be used to determine if there has
          been a change in a router's link state
          database, and to compare the link state database of
          two routers.  The value should be treated as unsigned
          when comparing two sums of checksums."
       DEFVAL { 0 }
       ::= { rosMgmtOspfAreaEntry 8 }

  rosMgmtOspfAreaSummary OBJECT-TYPE
       SYNTAX       INTEGER {
                       noAreaSummary (1),
                       sendAreaSummary (2)
                       }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION

          "The variable ospfAreaSummary controls the
          import of summary LSAs into stub and NSSA areas.
          It has no effect on other areas.

          If it is noAreaSummary, the router will not
          originate summary LSAs into the stub or NSSA area.
          It will rely entirely on its default route.

          If it is sendAreaSummary, the router will both
          summarize and propagate summary LSAs."
       DEFVAL { sendAreaSummary }
       ::= { rosMgmtOspfAreaEntry 9 }


  rosMgmtOspfAreaNssaTranslatorRole OBJECT-TYPE
       SYNTAX       INTEGER { always (1), candidate (2) }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "Indicates an NSSA border router's ability to
          perform NSSA translation of type-7 LSAs into
          type-5 LSAs."
       DEFVAL { candidate }
       ::= { rosMgmtOspfAreaEntry 10 }

  rosMgmtOspfAreaNssaTranslatorState OBJECT-TYPE
       SYNTAX       INTEGER { enabled (1),
                       elected (2),
                       disabled (3)
                       }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "Indicates if and how an NSSA border router is
          performing NSSA translation of type-7 LSAs into type-5

          LSAs.  When this object is set to enabled, the NSSA Border
          router's OspfAreaNssaExtTranslatorRole has been set to
          always.  When this object is set to elected, a candidate
          NSSA Border router is Translating type-7 LSAs into type-5.
          When this object is set to disabled, a candidate NSSA
          border router is NOT translating type-7 LSAs into type-5."
       ::= { rosMgmtOspfAreaEntry 11 }

  rosMgmtOspfAreaNssaTranslatorStabilityInterval OBJECT-TYPE
       SYNTAX       PositiveInteger
       UNITS        "seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of seconds after an elected translator
          determines its services are no longer required, that
          it should continue to perform its translation duties."
       DEFVAL { 40 }
       ::= { rosMgmtOspfAreaEntry 12 }

  rosMgmtOspfAreaNssaTranslatorEvents OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "Indicates the number of translator state changes
          that have occurred since the last boot-up.

          Discontinuities in the value of this counter can occur
          at re-initialization of the management system, and at other
          times as indicated by the value of ospfDiscontinuityTime."
       ::= { rosMgmtOspfAreaEntry 13 }   
       
  rosMgmtOspfAreaDefaultCost OBJECT-TYPE
       SYNTAX       BigMetric
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "It indicates the cost of default route of NSSA area or 
          stub area."
       DEFVAL { 1 }
       ::= { rosMgmtOspfAreaEntry 14 }
 
  rosMgmtOspfAreaType OBJECT-TYPE
       SYNTAX       INTEGER {  
                      backbone (1),
                      normal (2),
                      stub (3),
                      nssa (4),
                      transmit (5)
                      }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the type of 
          area,area 0 indicates backbone, area that has virtual-links is 
          transmit area. When area is configured as stub,it's a stub area, and 
          same as nssa area.other areas are called normal areas."
       ::= { rosMgmtOspfAreaEntry 15 }
  
  rosMgmtOspfAreaStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfAreaEntry 16 }   
  rosMgmtOspfAreaFilterInIpPrefixListName OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filter incoming summary lsa,the value of this object 
           indicates the name of an ip-prefix-list."
       ::= { rosMgmtOspfAreaEntry 17 }   

  rosMgmtOspfAreaFilterOutIpPrefixListName OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filter outgoing summary lsa,the value of this object 
           indicates the name of an ip-prefix-list."
       ::= { rosMgmtOspfAreaEntry 18 }   
       
   rosMgmtOspfAreaTeCapability OBJECT-TYPE
      SYNTAX       TruthValue
      MAX-ACCESS   read-create 
      STATUS       current
      DESCRIPTION
         "Indicate Area TE enable state."
      REFERENCE
         "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { rosMgmtOspfAreaEntry 19 }    
          
   
--  rosMgmtOspfNetWorkTable
--     The OSPF netwrok Table contains information
--     regarding the various areas.
rosMgmtOspfNetWorkTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfNetWorkEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The list of directly-connected networks which enable 
          the OSPF function."
       ::= { rosMgmtOspfObjects 3 }

  rosMgmtOspfNetWorkEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfNetWorkEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Defines an entry in the rosMgmtOspfNetWorkTable.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfAreaId,
               rosMgmtOspfNet, 
               rosMgmtOspfMask }
       ::= { rosMgmtOspfNetWorkTable 1 }

  RosMgmtOspfNetWorkEntry ::=
       SEQUENCE {
          rosMgmtOspfNet
             IpAddress,
          rosMgmtOspfMask
             IpAddress,
          rosMgmtOspfNetWorkStatus
             RowStatus
          }

  rosMgmtOspfNet OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The IP address of the net or subnet indicated
          by the range."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
       ::= { rosMgmtOspfNetWorkEntry 1 }

  rosMgmtOspfMask OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The subnet mask that pertains to the net or
          subnet."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
       ::= { rosMgmtOspfNetWorkEntry 2 }

  rosMgmtOspfNetWorkStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfNetWorkEntry 3 }
       
--rosMgmtOspfStubAreaTable    
--
--The table define ospf stub area
  rosMgmtOspfStubAreaTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfStubAreaEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The set of metrics that will be advertised
          by a default Area Border Router into a stub area."
       REFERENCE
          "OSPF Version 2, Appendix C.2, Area Parameters"
       ::= { rosMgmtOspfObjects 4 }

  rosMgmtOspfStubAreaEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfStubAreaEntry
       MAX-ACCESS   not-accessible
       STATUS      current
       DESCRIPTION
          "The metric for a given Type of Service that
          will be advertised by a default Area Border
          Router into a stub area.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       REFERENCE
          "OSPF Version 2, Appendix C.2, Area Parameters"
       INDEX { rosMgmtOspfProcessId, 
               rosMgmtOspfStubAreaId }
       ::= { rosMgmtOspfStubAreaTable 1 }

  RosMgmtOspfStubAreaEntry ::=
       SEQUENCE {
          rosMgmtOspfStubAreaId
             AreaID,
          rosMgmtOspfStubAreaOption
             TruthValue,
          rosMgmtOspfStubAreaStatus
             RowStatus
          }

  rosMgmtOspfStubAreaId OBJECT-TYPE
       SYNTAX       AreaID
       MAX-ACCESS   not-accessible -- read-only since originally an
                              -- SMIv1 index
       STATUS       current
       DESCRIPTION
          "The 32-bit identifier for the stub area.  On
          creation, this can be derived from the
          instance."
       ::= { rosMgmtOspfStubAreaEntry 1 }

  rosMgmtOspfStubAreaOption OBJECT-TYPE
       SYNTAX       TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The option of STUB area.True means that ABR cann't send summary lsa to
          stub area."
       ::= { rosMgmtOspfStubAreaEntry 2 }

  rosMgmtOspfStubAreaStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfStubAreaEntry 3 }
  
--rosMgmtOspfNssaAreaTable    
--
--The table define ospf nssa area
  rosMgmtOspfNssaAreaTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfNssaAreaEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The set of metrics that will be advertised
          by a default Area Border Router into a Nssa area."
       REFERENCE
          "Rfc 1587"
       ::= { rosMgmtOspfObjects 5 }

  rosMgmtOspfNssaAreaEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfNssaAreaEntry
       MAX-ACCESS   not-accessible
       STATUS      current
       DESCRIPTION
          "The metric for a given Type of Service that
          will be advertised by a default Area Border
          Router into a Nssa area.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       REFERENCE
          "Rfc 1587"
       INDEX { rosMgmtOspfProcessId, 
               rosMgmtOspfNssaAreaId }
       ::= { rosMgmtOspfNssaAreaTable 1 }

  RosMgmtOspfNssaAreaEntry ::=
       SEQUENCE {
          rosMgmtOspfNssaAreaId
             AreaID,
          rosMgmtOspfNssaAreaOption
             INTEGER,
          rosMgmtOspfNssaAreaStatus
             RowStatus
          }

  rosMgmtOspfNssaAreaId OBJECT-TYPE
       SYNTAX       AreaID
       MAX-ACCESS   not-accessible -- read-only since originally an
                              -- SMIv1 index
       STATUS       current
       DESCRIPTION
          "The 32-bit identifier for the nssa area.  On
          creation, this can be derived from the
          instance."
       ::= { rosMgmtOspfNssaAreaEntry 1 }

  rosMgmtOspfNssaAreaOption OBJECT-TYPE       
       SYNTAX       INTEGER {  
                      summarysend (0),
                      nosummary (4)
                      }	   
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The option of Nssa area. If first bit is set, Router should generate
          default type-7 lsa; if second bit is set, nssa area cann't import ex-
          ternal route; if third bit is set, ABR cann't send summary lsas to the
          nssa area."
       ::= { rosMgmtOspfNssaAreaEntry 2 }

  rosMgmtOspfNssaAreaStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfNssaAreaEntry 3 }       
       
     
--  rosMgmtOspfIfTable
--  OSPF Interface Table
-- 
  rosMgmtOspfIfTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfIfEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The OSPF Interface Table describes the interfaces
          from the viewpoint of OSPF.
          It augments the ipAddrTable with OSPF specific information."
       REFERENCE
          "OSPF Version 2, Appendix C.3  Router interface
          parameters"
       ::= { rosMgmtOspfObjects 6 }

  rosMgmtOspfIfEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfIfEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The OSPF interface entry describes one interface
          from the viewpoint of OSPF.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfAddressLessIf }
       ::= { rosMgmtOspfIfTable 1 }

  RosMgmtOspfIfEntry ::=
       SEQUENCE {
          rosMgmtOspfAddressLessIf
             InterfaceIndexOrZero,
          rosMgmtOspfIfIpAddress
             IpAddress,
          rosMgmtOspfIfAreaId
             AreaID,
          rosMgmtOspfIfType
             INTEGER,
          rosMgmtOspfIfAdminStat
             Status,
          rosMgmtOspfIfRtrPriority
             DesignatedRouterPriority,
          rosMgmtOspfIfTransitDelay
             Integer32,
          rosMgmtOspfIfRetransInterval
             Integer32,
          rosMgmtOspfIfHelloInterval
             Integer32,
          rosMgmtOspfIfRtrDeadInterval
             Integer32,
          rosMgmtOspfIfPollInterval
             Integer32,
          rosMgmtOspfIfState
             INTEGER,
          rosMgmtOspfIfDesignatedRouter
             IpAddress,
          rosMgmtOspfIfBackupDesignatedRouter
             IpAddress,
          rosMgmtOspfIfEvents
             Counter32,
          rosMgmtOspfIfAuthKeyId
             Integer32,  
          rosMgmtOspfIfAuthSimpleKeyType 
             INTEGER,
          rosMgmtOspfIfAuthMd5KeyType 
             INTEGER,
          rosMgmtOspfIfAuthSimpleKey  
             OCTET STRING,     
          rosMgmtOspfIfAuthMd5Key  
             OCTET STRING,     
          rosMgmtOspfIfAuthKeyChain
             OCTET STRING,
          rosMgmtOspfIfAuthType
             OspfAuthenticationType,
          rosMgmtOspfIfLsaCount
             Gauge32,
          rosMgmtOspfIfLsaCksumSum
             Unsigned32,
          rosMgmtOspfIfDesignatedRouterId
             RouterID,
          rosMgmtOspfIfBackupDesignatedRouterId
             RouterID, 
          rosMgmtOspfIfPassive   
             EnableVar,
          rosMgmtOspfIfMtu   
             EnableVar, 
          rosMgmtOspfIfMetric
             Metric,
          rosMgmtOspfIfBfd   
             EnableVar,   
          rosMgmtOspfIfGRResync
             Integer32
             }
  
  rosMgmtOspfAddressLessIf OBJECT-TYPE
       SYNTAX       InterfaceIndexOrZero
       MAX-ACCESS    read-only
       STATUS       current
       DESCRIPTION
          "For the purpose of easing the instancing of
          addressed and addressless interfaces; this
          variable takes the value 0 on interfaces with
          IP addresses and the corresponding value of
          ifIndex for interfaces having no IP address."
       ::= { rosMgmtOspfIfEntry 1 }
  
  rosMgmtOspfIfIpAddress OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only 
       STATUS       current
       DESCRIPTION
          "The IP address of this OSPF interface."

       ::= { rosMgmtOspfIfEntry 2 }

  rosMgmtOspfIfAreaId OBJECT-TYPE
       SYNTAX       AreaID
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "A 32-bit integer uniquely identifying the area
          to which the interface connects.  Area ID
          0.0.0.0 is used for the OSPF backbone."
       DEFVAL { '00000000'H }  -- 0.0.0.0
       ::= { rosMgmtOspfIfEntry 3 }

  rosMgmtOspfIfType OBJECT-TYPE
       SYNTAX       INTEGER {
                       none (0),
                       pointToPoint (1),
                       broadcast (2),
                       nbma (3),
                       pointToMultipoint (4),
                       virtuallink (5),
                       loopback (6)
                       }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The OSPF interface type.
          By way of a default, this field may be intuited
          from the corresponding value of ifType.
          Broadcast LANs, such as Ethernet and IEEE 802.5,
          take the value 'broadcast', X.25 and similar
          technologies take the value 'nbma', and links
          that are definitively point to point take the
          value 'pointToPoint'."  
       DEFVAL {broadcast}
        ::= { rosMgmtOspfIfEntry 4 }

  rosMgmtOspfIfAdminStat OBJECT-TYPE
       SYNTAX       Status

       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The OSPF interface's administrative status.
          The value formed on the interface, and the interface
          will be advertised as an internal route to some area.
          The value 'disabled' denotes that the interface is
          external to OSPF."
       DEFVAL { enabled }
       ::= { rosMgmtOspfIfEntry 5 }

  rosMgmtOspfIfRtrPriority OBJECT-TYPE
       SYNTAX       DesignatedRouterPriority
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The priority of this interface.  Used in
          multi-access networks, this field is used in
          the designated router election algorithm.  The
          value 0 signifies that the router is not eligible
          to become the designated router on this particular
          network.  In the event of a tie in this value,
          routers will use their Router ID as a tie breaker."
        DEFVAL { 1 }
        ::= { rosMgmtOspfIfEntry 6 }

  rosMgmtOspfIfTransitDelay OBJECT-TYPE
        SYNTAX       Integer32 (1..65535)
        UNITS        "seconds"
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
           "The estimated number of seconds it takes to
           transmit a link state update packet over this
           interface.  Note that the minimal value SHOULD be
           1 second."
        DEFVAL { 1 }
        ::= { rosMgmtOspfIfEntry 7 }

  rosMgmtOspfIfRetransInterval OBJECT-TYPE
       SYNTAX       Integer32 (1..65535)
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The number of seconds between link state advertisement
          retransmissions, for adjacencies belonging to this
          interface.  This value is also used when retransmitting

          database description and Link State request packets.
          Note that minimal value SHOULD be 1 second."
       DEFVAL { 5 }
       ::= { rosMgmtOspfIfEntry 8 }

  rosMgmtOspfIfHelloInterval OBJECT-TYPE
       SYNTAX       Integer32 (1..65535)
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The length of time, in seconds, between the Hello packets
          that the router sends on the interface.  This value must be
          the same for all routers attached to a common network."
       DEFVAL { 10 }
       ::= { rosMgmtOspfIfEntry 9 }

  rosMgmtOspfIfRtrDeadInterval OBJECT-TYPE
       SYNTAX       Integer32 (1..65535)
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The number of seconds that a router's Hello packets have
          not been seen before its neighbors declare the router down.
          This should be some multiple of the Hello interval.  This
          value must be the same for all routers attached to a common
          network."
        DEFVAL { 40 }
        ::= { rosMgmtOspfIfEntry 10 }

  rosMgmtOspfIfPollInterval OBJECT-TYPE
       SYNTAX       Integer32 (1..65535)
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The larger time interval, in seconds, between the Hello
          packets sent to an inactive non-broadcast multi-access
          neighbor."
       DEFVAL { 120 }
       ::= { rosMgmtOspfIfEntry 11 }

  rosMgmtOspfIfState OBJECT-TYPE
       SYNTAX       INTEGER {
                       down (1),
                       loopback (2),
                       waiting (3),
                       pointToPoint (4),
                       designatedRouter (5),
                       backupDesignatedRouter (6),
                       otherDesignatedRouter (7)
                       }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The OSPF Interface State."
       DEFVAL { down }
       ::= { rosMgmtOspfIfEntry 12 }

  rosMgmtOspfIfDesignatedRouter OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The IP address of the designated router."
       DEFVAL { '00000000'H } -- 0.0.0.0
       ::= { rosMgmtOspfIfEntry 13 }

  rosMgmtOspfIfBackupDesignatedRouter OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The IP address of the backup designated
          router."
       DEFVAL { '00000000'H }  -- 0.0.0.0
       ::= { rosMgmtOspfIfEntry 14 }

  rosMgmtOspfIfEvents OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of times this OSPF interface has
          changed its state or an error has occurred.

          Discontinuities in the value of this counter can occur
          at re-initialization of the management system, and at other
          times as indicated by the value of ospfDiscontinuityTime."
       ::= { rosMgmtOspfIfEntry 15 }
 
  rosMgmtOspfIfAuthKeyId OBJECT-TYPE
       SYNTAX       Integer32 (0..255)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION  
          "The key id of md5 authentication."   
       DEFVAL { 0 }   
       ::= { rosMgmtOspfIfEntry 16 } 
         
  rosMgmtOspfIfAuthSimpleKeyType OBJECT-TYPE
       SYNTAX       INTEGER {plain(0), cipher(7)}
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION  
          "The type of password for simple authentication."   
       DEFVAL { 0 }   
       ::= { rosMgmtOspfIfEntry 17 }
  
  rosMgmtOspfIfAuthMd5KeyType OBJECT-TYPE
       SYNTAX       INTEGER {plain(0), cipher(7)}
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION  
          "The type of password for md5 authentication."   
       DEFVAL { 0 }
       ::= { rosMgmtOspfIfEntry 18 }

  rosMgmtOspfIfAuthSimpleKey OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The password used as an OSPF
          authentication key when simple password security
          is enabled."
       DEFVAL {''h}    
       ::= { rosMgmtOspfIfEntry 19 } 
       
  rosMgmtOspfIfAuthMd5Key OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The password used as an OSPF
          authentication key when md5 security
          is enabled."  
       DEFVAL {''h}   
       ::= { rosMgmtOspfIfEntry 20 }
  
  rosMgmtOspfIfAuthKeyChain OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The name of key chain."
       DEFVAL {''h}
       ::= { rosMgmtOspfIfEntry 21 }

  rosMgmtOspfIfAuthType OBJECT-TYPE
       SYNTAX       OspfAuthenticationType
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The authentication type specified for an interface.

          Note that this object can be used to engage
          in significant attacks against an OSPF router."
       REFERENCE
          "OSPF Version 2, Appendix D Authentication"
       DEFVAL { none } -- no authentication, by default
       ::= { rosMgmtOspfIfEntry 22 }

  rosMgmtOspfIfLsaCount OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The total number of link-local link state advertisements
          in this interface's link-local link state database."
       ::= { rosMgmtOspfIfEntry 23 }

  rosMgmtOspfIfLsaCksumSum OBJECT-TYPE
       SYNTAX       Unsigned32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The 32-bit unsigned sum of the Link State
          Advertisements' LS checksums contained in this
          interface's link-local link state database.
          The sum can be used to determine if there has
          been a change in the interface's link state
          database and to compare the interface link state
          database of routers attached to the same subnet."
       ::= { rosMgmtOspfIfEntry 24 }

  rosMgmtOspfIfDesignatedRouterId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The Router ID of the designated router."
       ::= { rosMgmtOspfIfEntry 25 }

  rosMgmtOspfIfBackupDesignatedRouterId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The Router ID of the backup designated router."
       ::= { rosMgmtOspfIfEntry 26 } 
       
  rosMgmtOspfIfPassive OBJECT-TYPE
       SYNTAX       EnableVar
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Indicate the interface is a passive interface." 
       DEFVAL {disable}  
       ::= { rosMgmtOspfIfEntry 27 }
    
  rosMgmtOspfIfMtu OBJECT-TYPE
       SYNTAX       EnableVar
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Indicate ignore the interface's mtu." 
       DEFVAL {disable}  
       ::= { rosMgmtOspfIfEntry 28 }     

  rosMgmtOspfIfMetric OBJECT-TYPE
       SYNTAX       Metric
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The metric of using this Type of Service on
          this interface.  The default value of the TOS 0
          metric is 10^8 / ifSpeed."
       ::= { rosMgmtOspfIfEntry 29 }

  rosMgmtOspfIfBfd OBJECT-TYPE
       SYNTAX       EnableVar
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Indicate the interface enables BFD function." 
       DEFVAL {disable}  
       ::= { rosMgmtOspfIfEntry 30 }      
       
 rosMgmtOspfIfGRResync OBJECT-TYPE
       SYNTAX       Integer32 (1..65535)
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The interval period starts from the time a 
          restart signal is received from a neighbor."
       DEFVAL { 40 }
       ::= { rosMgmtOspfIfEntry 31 }   
       
--rosMgmtOspfVirtIfTable    
--
--OSPF Virtual Interface Table
  rosMgmtOspfVirtIfTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfVirtIfEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Information about this router's virtual interfaces
          that the OSPF Process is configured to carry on."
       REFERENCE
          "OSPF Version 2, Appendix C.4  Virtual link
          parameters"
       ::= { rosMgmtOspfObjects 7 }

  rosMgmtOspfVirtIfEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfVirtIfEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Information about a single virtual interface.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."

       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfVirtIfAreaId, 
               rosMgmtOspfVirtIfNeighbor }
       ::= { rosMgmtOspfVirtIfTable 1 }

  RosMgmtOspfVirtIfEntry ::=
       SEQUENCE {
          rosMgmtOspfVirtIfAreaId
             AreaID,
          rosMgmtOspfVirtIfNeighbor
             RouterID,
          rosMgmtOspfVirtIfTransitDelay
             UpToMaxAge,
          rosMgmtOspfVirtIfRetransInterval
             UpToMaxAge,
          rosMgmtOspfVirtIfHelloInterval
             HelloRange,
          rosMgmtOspfVirtIfRtrDeadInterval
             PositiveInteger,
          rosMgmtOspfVirtIfState
             INTEGER,
          rosMgmtOspfVirtIfEvents
             Counter32,    
          rosMgmtOspfVirtIfAuthKeyId
             Integer32,  
          rosMgmtOspfVirtIfAuthSimpleKeyType 
             INTEGER,
          rosMgmtOspfVirtIfAuthMd5KeyType 
             INTEGER,
          rosMgmtOspfVirtIfAuthSimpleKey  
             OCTET STRING,     
          rosMgmtOspfVirtIfAuthMd5Key  
             OCTET STRING,     
          rosMgmtOspfVirtIfAuthKeyChain
             OCTET STRING,
          rosMgmtOspfVirtIfAuthType
             OspfAuthenticationType,
          rosMgmtOspfVirtIfLsaCount
             Gauge32,
          rosMgmtOspfVirtIfLsaCksumSum
             Unsigned32,
          rosMgmtOspfVirtIfCost
             Integer32,
          rosMgmtOspfVirtIfStatus
             RowStatus
          }

  rosMgmtOspfVirtIfAreaId OBJECT-TYPE
       SYNTAX       AreaID
       MAX-ACCESS    read-only
       STATUS       current
       DESCRIPTION
          "The transit area that the virtual link
          traverses.  By definition, this is not 0.0.0.0."
       ::= { rosMgmtOspfVirtIfEntry 1 }

  rosMgmtOspfVirtIfNeighbor OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS    read-only
       STATUS       current
       DESCRIPTION
          "The Router ID of the virtual neighbor."
       ::= { rosMgmtOspfVirtIfEntry 2 }

  rosMgmtOspfVirtIfTransitDelay OBJECT-TYPE
       SYNTAX       UpToMaxAge
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The estimated number of seconds it takes to
          transmit a Link State update packet over this
          interface.  Note that the minimal value SHOULD be
          1 second."
       DEFVAL { 1 }
       ::= { rosMgmtOspfVirtIfEntry 3 }

  rosMgmtOspfVirtIfRetransInterval OBJECT-TYPE
       SYNTAX       UpToMaxAge
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The number of seconds between link state
          avertisement retransmissions, for adjacencies
          belonging to this interface.  This value is
          also used when retransmitting database
          description and Link State request packets.  This
          value should be well over the expected
          round-trip time.  Note that the minimal value SHOULD be
          1 second."
       DEFVAL { 5 }
       ::= { rosMgmtOspfVirtIfEntry 4 }

  rosMgmtOspfVirtIfHelloInterval OBJECT-TYPE
       SYNTAX       HelloRange
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The length of time, in seconds, between the
          Hello packets that the router sends on the
          interface.  This value must be the same for the
          virtual neighbor."
       DEFVAL { 10 }
       ::= { rosMgmtOspfVirtIfEntry 5 }

  rosMgmtOspfVirtIfRtrDeadInterval OBJECT-TYPE

       SYNTAX       PositiveInteger
       UNITS        "seconds"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The number of seconds that a router's Hello
          packets have not been seen before its
          neighbors declare the router down.  This should be
          some multiple of the Hello interval.  This
          value must be the same for the virtual neighbor."
       DEFVAL { 60 }
       ::= { rosMgmtOspfVirtIfEntry 6 }

  rosMgmtOspfVirtIfState OBJECT-TYPE
       SYNTAX       INTEGER {
                       down (1), -- these use the same encoding
                       pointToPoint (4) -- as the rosMgmtOspfIfTable
                       }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "OSPF virtual interface states."
       DEFVAL { down }
       ::= { rosMgmtOspfVirtIfEntry 7 }

  rosMgmtOspfVirtIfEvents OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of state changes or error events on
          this virtual link.

          Discontinuities in the value of this counter can occur
          at re-initialization of the management system, and at other
          times as indicated by the value of ospfDiscontinuityTime."
       ::= { rosMgmtOspfVirtIfEntry 8 } 
       
   rosMgmtOspfVirtIfAuthKeyId OBJECT-TYPE
       SYNTAX       Integer32 (0..255)
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION  
          "The key id of md5 authentication."   
       DEFVAL { 0 }   
       ::= { rosMgmtOspfVirtIfEntry 9 } 
         
  rosMgmtOspfVirtIfAuthSimpleKeyType OBJECT-TYPE
       SYNTAX       INTEGER {plain(0), cipher(7)}
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION  
          "The type of password for simple authentication."   
       DEFVAL { 0 }   
       ::= { rosMgmtOspfVirtIfEntry 10 }
  
  rosMgmtOspfVirtIfAuthMd5KeyType OBJECT-TYPE
       SYNTAX       INTEGER {plain(0), cipher(7)}
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION  
          "The type of password for md5 authentication."   
       DEFVAL { 0 }
       ::= { rosMgmtOspfVirtIfEntry 11 }

  rosMgmtOspfVirtIfAuthSimpleKey OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current

       DESCRIPTION
          "The password used as an OSPF
          authentication key when simple password security
          is enabled."  
       DEFVAL {''h}   
       ::= { rosMgmtOspfVirtIfEntry 12 } 
       
  rosMgmtOspfVirtIfAuthMd5Key OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The password used as an OSPF
          authentication key when md5 security
          is enabled."
       DEFVAL {''h} 
       ::= { rosMgmtOspfVirtIfEntry 13 }
  
  rosMgmtOspfVirtIfAuthKeyChain OBJECT-TYPE
       SYNTAX       OCTET STRING 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The name of key chain."
       DEFVAL {''h}
       ::= { rosMgmtOspfVirtIfEntry 14 }

  rosMgmtOspfVirtIfAuthType OBJECT-TYPE
       SYNTAX       OspfAuthenticationType
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The authentication type specified for a virtual interface.

          Note that this object can be used to engage
          in significant attacks against an OSPF router."
       REFERENCE
          "OSPF Version 2, Appendix E Authentication"
       DEFVAL { none } -- no authentication, by default

       ::= { rosMgmtOspfVirtIfEntry 15 }

  rosMgmtOspfVirtIfLsaCount OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The total number of link-local link state advertisements
          in this virtual interface's link-local link state database."
       ::= { rosMgmtOspfVirtIfEntry 16 }

  rosMgmtOspfVirtIfLsaCksumSum OBJECT-TYPE
       SYNTAX       Unsigned32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The 32-bit unsigned sum of the link state
          advertisements' LS checksums contained in this
          virtual interface's link-local link state database.
          The sum can be used to determine if there has
          been a change in the virtual interface's link state
          database, and to compare the virtual interface
          link state database of the virtual neighbors."
       ::= { rosMgmtOspfVirtIfEntry 17 }  

  rosMgmtOspfVirtIfCost OBJECT-TYPE
       SYNTAX       Integer32 (1.. 65535)
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the cost of 
          virtual interface."
       DEFVAL { 1 }
       ::= { rosMgmtOspfVirtIfEntry 18 } 
       
  rosMgmtOspfVirtIfStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
        ::= { rosMgmtOspfVirtIfEntry 19 }   
        
--rosMgmtOspfNbrTable    
--
--OSPF Neighbor Table
  rosMgmtOspfNbrTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfNbrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "A table describing all non-virtual neighbors
          in the locality of the OSPF router."
       REFERENCE
          "OSPF Version 2, Section 10 The Neighbor Data
          Structure"
       ::= { rosMgmtOspfObjects 8 }

  rosMgmtOspfNbrEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfNbrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The information regarding a single neighbor.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       REFERENCE
          "OSPF Version 2, Section 10 The Neighbor Data
          Structure"
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfNbrIpAddr,
               rosMgmtOspfNbrAddressLessIndex }
       ::= { rosMgmtOspfNbrTable 1 }

  RosMgmtOspfNbrEntry ::=
       SEQUENCE {
          rosMgmtOspfNbrIpAddr
             IpAddress,
          rosMgmtOspfNbrAddressLessIndex
             InterfaceIndexOrZero,
          rosMgmtOspfNbrRtrId
             RouterID,
          rosMgmtOspfNbrOptions
             Integer32,
          rosMgmtOspfNbrPriority
             DesignatedRouterPriority,
          rosMgmtOspfNbrState
             INTEGER,
          rosMgmtOspfNbrEvents
             Counter32,
          rosMgmtOspfNbrLsRetransQLen
             Gauge32,
          rosMgmtOspfNbrMode
             INTEGER   
          }

  rosMgmtOspfNbrIpAddr OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only -- read-only since originally an
                              -- SMIv1 index
       STATUS       current
       DESCRIPTION
          "The IP address this neighbor is using in its
          IP source address.  Note that, on addressless
          links, this will not be 0.0.0.0 but the

          address of another of the neighbor's interfaces."
       ::= { rosMgmtOspfNbrEntry 1 }

   rosMgmtOspfNbrAddressLessIndex OBJECT-TYPE
       SYNTAX       InterfaceIndexOrZero
       MAX-ACCESS   read-only -- read-only since originally an
                              -- SMIv1 index
       STATUS       current
       DESCRIPTION
          "On an interface having an IP address, zero.
          On addressless interfaces, the corresponding
          value of ifIndex in the Internet Standard MIB.
          On row creation, this can be derived from the
          instance."
        ::= { rosMgmtOspfNbrEntry 2 }

  rosMgmtOspfNbrRtrId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "A 32-bit integer (represented as a type
          IpAddress) uniquely identifying the neighboring
          router in the Autonomous System."
       DEFVAL { '00000000'H } -- 0.0.0.0
       ::= { rosMgmtOspfNbrEntry 3 }

  rosMgmtOspfNbrOptions OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "A bit mask corresponding to the neighbor's
          options field.

          Bit 0, if set, indicates that the system will
          operate on Type of Service metrics other than
          TOS 0.  If zero, the neighbor will ignore all
          metrics except the TOS 0 metric.

          Bit 1, if set, indicates that the associated
          area accepts and operates on external
          information; if zero, it is a stub area.

          Bit 2, if set, indicates that the system is
          capable of routing IP multicast datagrams, that is
          that it implements the multicast extensions to
          OSPF.

          Bit 3, if set, indicates that the associated
          area is an NSSA.  These areas are capable of
          carrying type-7 external advertisements, which
          are translated into type-5 external advertisements
          at NSSA borders."
       REFERENCE
           "OSPF Version 2, Section 12.1.2 Options"
       DEFVAL { 0 }
       ::= { rosMgmtOspfNbrEntry 4 }

   rosMgmtOspfNbrPriority OBJECT-TYPE
       SYNTAX       DesignatedRouterPriority
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The priority of this neighbor in the designated
          router election algorithm.  The value 0 signifies
          that the neighbor is not eligible to become
          the designated router on this particular network."
       DEFVAL { 1 }
       ::= { rosMgmtOspfNbrEntry 5 }

   rosMgmtOspfNbrState OBJECT-TYPE
        SYNTAX       INTEGER {
                         down (1),
                         attempt (2),
                         init (3),
                         twoWay (4),
                         exchangeStart (5),
                         exchange (6),
                         loading (7),
                         full (8)
                         }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "The state of the relationship with this neighbor."
         REFERENCE
            "OSPF Version 2, Section 10.1 Neighbor States"
         DEFVAL { down }
         ::= { rosMgmtOspfNbrEntry 6 }

  rosMgmtOspfNbrEvents OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of times this neighbor relationship
          has changed state or an error has occurred.

          Discontinuities in the value of this counter can occur
          at re-initialization of the management system, and at other
          times as indicated by the value of ospfDiscontinuityTime."
       ::= { rosMgmtOspfNbrEntry 7 }

  rosMgmtOspfNbrLsRetransQLen OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The current length of the retransmission
          queue."
       ::= { rosMgmtOspfNbrEntry 8 } 
  
  rosMgmtOspfNbrMode OBJECT-TYPE
       SYNTAX       INTEGER {  
                      slave (1),
                      master (2)
                      }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the master-slave mode of 
          neighbor. "
       DEFVAL { slave }
       ::= { rosMgmtOspfNbrEntry 9 }           
       
--rosMgmtOspfNbmaCfgNbrTable    
--
--OSPF Nbma Network Configed Neighbor Table
  rosMgmtOspfNbmaCfgNbrTable   OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfNbmaCfgNbrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "A table describing all configured neigbors on nbma network."
       ::= { rosMgmtOspfObjects 9 }

  rosMgmtOspfNbmaCfgNbrEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfNbmaCfgNbrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The information regarding a Configured neighbor.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       REFERENCE
          "OSPF Version 2, Section 10 The Neighbor Data
          Structure"
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfNbmaCfgNbrIpAddr }
       ::= { rosMgmtOspfNbmaCfgNbrTable 1 }

  RosMgmtOspfNbmaCfgNbrEntry ::=
       SEQUENCE {
          rosMgmtOspfNbmaCfgNbrIpAddr
             IpAddress,
          rosMgmtOspfNbmaCfgNbrPriority 
             DesignatedRouterPriority, 
          rosMgmtOspfNbmaCfgNbrStatus
             RowStatus       
          }

  rosMgmtOspfNbmaCfgNbrIpAddr OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The IP address this neighbor is using in its
          IP source address.  Note that, on addressless
          links, this will not be 0.0.0.0 but the
          address of another of the neighbor's interfaces."
       ::= { rosMgmtOspfNbmaCfgNbrEntry 1 }    
              
  rosMgmtOspfNbmaCfgNbrPriority OBJECT-TYPE
       SYNTAX       DesignatedRouterPriority
       MAX-ACCESS   read-create 
       STATUS       current
       DESCRIPTION
          "The priority of this neighbor in the designated
          router election algorithm.  The value 0 signifies
          that the neighbor is not eligible to become
          the designated router on this particular network." 
       DEFVAL { 1 }
       ::= { rosMgmtOspfNbmaCfgNbrEntry 2 }           

  rosMgmtOspfNbmaCfgNbrStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfNbmaCfgNbrEntry 3 }
 
--rosMgmtOspfVirtNbrTable    
--
--OSPF Virtual Neighbor Table
  rosMgmtOspfVirtNbrTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfVirtNbrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "This table describes all virtual neighbors.
          Since virtual links are configured
          in the Virtual Interface Table, this table is read-only."
       REFERENCE
          "OSPF Version 2, Section 15 Virtual Links"
       ::= { rosMgmtOspfObjects 10 }

  rosMgmtOspfVirtNbrEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfVirtNbrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Virtual neighbor information."
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfVirtNbrArea, 
               rosMgmtOspfVirtNbrRtrId }
       ::= { rosMgmtOspfVirtNbrTable 1 }

  RosMgmtOspfVirtNbrEntry ::=
       SEQUENCE {
          rosMgmtOspfVirtNbrArea
             AreaID,
          rosMgmtOspfVirtNbrRtrId
             RouterID,
          rosMgmtOspfVirtNbrIpAddr
             IpAddress,
          rosMgmtOspfVirtNbrOptions
             Integer32,
          rosMgmtOspfVirtNbrState
             INTEGER,
          rosMgmtOspfVirtNbrEvents
             Counter32,
          rosMgmtOspfVirtNbrLsRetransQLen
             Gauge32,
          rosMgmtOspfVirtNbrLessIf
             Integer32,
          rosMgmtOspfVirtNbrMode
             INTEGER
          }

  rosMgmtOspfVirtNbrArea OBJECT-TYPE

       SYNTAX       AreaID
       MAX-ACCESS   read-only -- read-only since originally an
                              -- SMIv1 index
       STATUS       current
       DESCRIPTION
          "The Transit Area Identifier."
       ::= { rosMgmtOspfVirtNbrEntry 1 }

  rosMgmtOspfVirtNbrRtrId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   read-only -- read-only since originally an
                              -- SMIv1 index
       STATUS      current
       DESCRIPTION
          "A 32-bit integer uniquely identifying the
          neighboring router in the Autonomous System."
       ::= { rosMgmtOspfVirtNbrEntry 2 }

  rosMgmtOspfVirtNbrIpAddr OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The IP address this virtual neighbor is using."
       ::= { rosMgmtOspfVirtNbrEntry 3 }

  rosMgmtOspfVirtNbrOptions OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "A bit mask corresponding to the neighbor's
          options field.

          Bit 1, if set, indicates that the system will
          operate on Type of Service metrics other than
          TOS 0.  If zero, the neighbor will ignore all
          metrics except the TOS 0 metric.

          Bit 2, if set, indicates that the system is
          network multicast capable, i.e., that it
          implements OSPF multicast routing."
       ::= { rosMgmtOspfVirtNbrEntry 4 }

   rosMgmtOspfVirtNbrState OBJECT-TYPE
       SYNTAX       INTEGER {
                       down (1),
                       attempt (2),
                       init (3),
                       twoWay (4),
                       exchangeStart (5),
                       exchange (6),
                       loading (7),
                       full (8)
                       }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The state of the virtual neighbor relationship."
       ::= { rosMgmtOspfVirtNbrEntry 5 }

  rosMgmtOspfVirtNbrEvents OBJECT-TYPE
       SYNTAX       Counter32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number of times this virtual link has
          changed its state or an error has occurred.

          Discontinuities in the value of this counter can occur
          at re-initialization of the management system, and at other
          times as indicated by the value of ospfDiscontinuityTime."
       ::= { rosMgmtOspfVirtNbrEntry 6 }

  rosMgmtOspfVirtNbrLsRetransQLen OBJECT-TYPE
       SYNTAX       Gauge32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The current length of the retransmission
          queue."
       ::= { rosMgmtOspfVirtNbrEntry 7 }
       
  rosMgmtOspfVirtNbrLessIf OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the out interface index of 
          this virtual neighbor."
       ::= { rosMgmtOspfVirtNbrEntry 8 }

  rosMgmtOspfVirtNbrMode OBJECT-TYPE
       SYNTAX       INTEGER {  
                      slave (1),
                      master (2)
                      }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the master-slave mode of 
          virtual neighbor. "
       DEFVAL { slave }
       ::= { rosMgmtOspfVirtNbrEntry 9 }

--  The OSPF Area Aggregate Table
--
--     This table replaces the OSPF Area Summary Table, being an
--     extension of that for CIDR routers.
   rosMgmtOspfAreaAggregateTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfAreaAggregateEntry
       MAX-ACCESS   not-accessible
       STATUS       current

       DESCRIPTION
          "The Area Aggregate Table acts as an adjunct
           to the Area Table.  It describes those address aggregates
           that are configured to be propagated from an area.
           Its purpose is to reduce the amount of information
           that is known beyond an Area's borders.

           It contains a set of IP address ranges
           specified by an IP address/IP network mask pair.
           For example, a class B address range of X.X.X.X
           with a network mask of 255.255.0.0 includes all IP
           addresses from X.X.0.0 to X.X.255.255.

           Note that if ranges are configured such that one range
           subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
           and 10.1.0.0 mask 255.255.0.0),
           the most specific match is the preferred one."
       REFERENCE
          "OSPF Version 2, Appendix C.2  Area parameters"
       ::= { rosMgmtOspfObjects 11 }

  rosMgmtOspfAreaAggregateEntry OBJECT-TYPE
       SYNTAX   RosMgmtOspfAreaAggregateEntry
       MAX-ACCESS   not-accessible
       STATUS   current
       DESCRIPTION
          "A single area aggregate entry.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       REFERENCE
          "OSPF Version 2, Appendix C.2  Area parameters"
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfAreaAggregateAreaID, 
               rosMgmtOspfAreaAggregateLsdbType,
               rosMgmtOspfAreaAggregateNet, 
               rosMgmtOspfAreaAggregateMask }
       ::= { rosMgmtOspfAreaAggregateTable 1 }

  RosMgmtOspfAreaAggregateEntry ::=
       SEQUENCE {
          rosMgmtOspfAreaAggregateAreaID
             AreaID,
          rosMgmtOspfAreaAggregateLsdbType
             INTEGER,
          rosMgmtOspfAreaAggregateNet
             IpAddress,
          rosMgmtOspfAreaAggregateMask
             IpAddress, 
          rosMgmtOspfAreaAggregateEffect
             INTEGER,
          rosMgmtOspfAreaAggregateStatus
             RowStatus
          }

  rosMgmtOspfAreaAggregateAreaID OBJECT-TYPE
       SYNTAX       AreaID
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "The area within which the address aggregate is to be
          found."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
       ::= { rosMgmtOspfAreaAggregateEntry 1 }

  rosMgmtOspfAreaAggregateLsdbType OBJECT-TYPE
       SYNTAX       INTEGER {
                       summaryLink (3),
                       nssaExternalLink (7)
                       }
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "The type of the address aggregate.  This field
          specifies the Lsdb type that this address
          aggregate applies to."
       REFERENCE
          "OSPF Version 2, Appendix A.4.1 The Link State
          Advertisement header"
       ::= { rosMgmtOspfAreaAggregateEntry 2 }

  rosMgmtOspfAreaAggregateNet OBJECT-TYPE
       SYNTAX   IpAddress
       MAX-ACCESS    not-accessible
       STATUS   current
       DESCRIPTION
          "The IP address of the net or subnet indicated
          by the range."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
       ::= { rosMgmtOspfAreaAggregateEntry 3 }

  rosMgmtOspfAreaAggregateMask OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS    not-accessible
       STATUS      current
       DESCRIPTION
          "The subnet mask that pertains to the net or
          subnet."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
       ::= { rosMgmtOspfAreaAggregateEntry 4 } 
       
  rosMgmtOspfAreaAggregateEffect OBJECT-TYPE
       SYNTAX       INTEGER {
                       advertiseMatching (1),
                       doNotAdvertiseMatching (2)
                       }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Subnets subsumed by ranges either trigger the
          advertisement of the indicated aggregate
         (advertiseMatching) or result in the subnet's not
          being advertised at all outside the area."
       DEFVAL { advertiseMatching }
       ::= { rosMgmtOspfAreaAggregateEntry 5 }

  rosMgmtOspfAreaAggregateStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfAreaAggregateEntry 6 }    
       
--  The OSPF External Aggregate Table
--
   rosMgmtOspfExternalAggregateTable   OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfExternalAggregateEntry
       MAX-ACCESS   not-accessible
       STATUS       current

       DESCRIPTION
          "It contains a set of IP address ranges
           specified by an IP address/IP network mask pair.
           For example, a class B address range of X.X.X.X
           with a network mask of 255.255.0.0 includes all IP
           addresses from X.X.0.0 to X.X.255.255.

           Note that if ranges are configured such that one range
           subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
           and 10.1.0.0 mask 255.255.0.0),
           the most specific match is the preferred one."
       ::= { rosMgmtOspfObjects 12 }

  rosMgmtOspfExternalAggregateEntry OBJECT-TYPE
       SYNTAX   RosMgmtOspfExternalAggregateEntry
       MAX-ACCESS   not-accessible
       STATUS   current
       DESCRIPTION
          "A single external aggregate entry.

          Information in this table is persistent and when this object
          is written the entity SHOULD save the change to non-volatile
          storage."
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfExternalAggregateNet, 
               rosMgmtOspfExternalAggregateMask }
       ::= { rosMgmtOspfExternalAggregateTable 1 }

  RosMgmtOspfExternalAggregateEntry ::=
       SEQUENCE {
          rosMgmtOspfExternalAggregateNet
             IpAddress,   
          rosMgmtOspfExternalAggregateMask
             IpAddress, 
          rosMgmtOspfExternalAggregateEffect
             INTEGER,
          rosMgmtOspfExternalAggregateCost
             BigMetric,
          rosMgmtOspfExternalAggregateStatus
             RowStatus
          }

  rosMgmtOspfExternalAggregateNet OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS  not-accessible
       STATUS       current
       DESCRIPTION
          "The IP address of the net or subnet indicated
          by the range."
       ::= { rosMgmtOspfExternalAggregateEntry 1 } 
       
  rosMgmtOspfExternalAggregateMask OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   not-accessible
       STATUS      current
       DESCRIPTION
          "The subnet mask that pertains to the net or
          subnet."
       ::= { rosMgmtOspfExternalAggregateEntry 2 } 

  rosMgmtOspfExternalAggregateEffect OBJECT-TYPE
       SYNTAX       INTEGER {
                             doNotAdvertise (1),
                             advertise(2)
                             }
       MAX-ACCESS   read-create       
       STATUS       current
       DESCRIPTION
          "This object controls the advertisement of external route summary."  
       DEFVAL { advertise }
       ::= { rosMgmtOspfExternalAggregateEntry 3 }

  rosMgmtOspfExternalAggregateCost OBJECT-TYPE
       SYNTAX   BigMetric
       MAX-ACCESS   read-create
       STATUS   current
       DESCRIPTION
          "It indicates the cost of aggregated external route, 16777215 
          represents the cost is not set, the metric of route while decided
          by ospf itself according to the route type." 
       DEFVAL { 1 }
       ::= { rosMgmtOspfExternalAggregateEntry 4 }

  rosMgmtOspfExternalAggregateStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfExternalAggregateEntry 5 } 

--rosMgmtOspfLsdbTable    
--
--The table define link state database
  rosMgmtOspfLsdbTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfLsdbEntry
       MAX-ACCESS   not-accessible
       STATUS       current

       DESCRIPTION
          "The OSPF Process's link state database (LSDB).
           The LSDB contains the link state advertisements
           from throughout the areas that the device is attached to."
       REFERENCE
          "OSPF Version 2, Section 12 Link State Advertisements"
       ::= { rosMgmtOspfObjects 13 }

  rosMgmtOspfLsdbEntry OBJECT-TYPE
       SYNTAX   RosMgmtOspfLsdbEntry
       MAX-ACCESS   not-accessible
       STATUS   current
       DESCRIPTION
          "A single link state advertisement."
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfLsdbAreaId, 
               rosMgmtOspfLsdbType,
               rosMgmtOspfLsdbLsId, 
               rosMgmtOspfLsdbRouterId }
       ::= { rosMgmtOspfLsdbTable 1 }

  RosMgmtOspfLsdbEntry ::=
       SEQUENCE {
          rosMgmtOspfLsdbAreaId
             AreaID,
          rosMgmtOspfLsdbType
             INTEGER,
          rosMgmtOspfLsdbLsId
             IpAddress,
          rosMgmtOspfLsdbRouterId
             RouterID,
          rosMgmtOspfLsdbSequence
             Integer32,
          rosMgmtOspfLsdbAge
             Integer32,
          rosMgmtOspfLsdbChecksum
             Integer32,
          rosMgmtOspfLsdbAdvertisement
             OCTET STRING
          }

  rosMgmtOspfLsdbAreaId OBJECT-TYPE
       SYNTAX       AreaID
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The 32-bit identifier of the area from which
          the LSA was received."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"

       ::= { rosMgmtOspfLsdbEntry 1 }

  rosMgmtOspfLsdbType OBJECT-TYPE
       SYNTAX       INTEGER {
                       routerLink (1),
                       networkLink (2),
                       summaryLink (3),
                       asSummaryLink (4),
                       asExternalLink (5), -- but see rosMgmtOspfAsLsdbTable
                       multicastLink (6),
                       nssaExternalLink (7), 
                       linkOpaqueLink (9),
                       areaOpaqueLink (10),
                       asOpaqueLink (11)
                       }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The type of the link state advertisement.
          Each link state type has a separate advertisement
          format.

          Note: External link state advertisements are permitted
          for backward compatibility, but should be displayed
          in the rosMgmtOspfAsLsdbTable rather than here."
       REFERENCE
          "OSPF Version 2, Appendix A.4.1 The Link State
          Advertisement header"
       ::= { rosMgmtOspfLsdbEntry 2 }

  rosMgmtOspfLsdbLsId OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The Link State ID is an LS Type Specific field
          containing either a Router ID or an IP address;
          it identifies the piece of the routing domain
          that is being described by the advertisement."
       REFERENCE
          "OSPF Version 2, Section 12.1.4 Link State ID"
       ::= { rosMgmtOspfLsdbEntry 3 }

  rosMgmtOspfLsdbRouterId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   read-only
       STATUS       current

       DESCRIPTION
          "The 32-bit number that uniquely identifies the
          originating router in the Autonomous System."
       REFERENCE
          "OSPF Version 2, Appendix C.1 Global parameters"
       ::= { rosMgmtOspfLsdbEntry 4 }

  rosMgmtOspfLsdbSequence OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The sequence number field is a signed 32-bit
          integer.  It starts with the value '80000001'h,
          or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
          Thus, a typical sequence number will be very negative.
          It is used to detect old and duplicate Link State
          Advertisements.  The space of sequence numbers is linearly
          ordered.  The larger the sequence number, the more recent
          the advertisement."
       REFERENCE
          "OSPF Version 2, Section 12.1.6 LS sequence
          number"
       ::= { rosMgmtOspfLsdbEntry 5 }

  rosMgmtOspfLsdbAge OBJECT-TYPE
       SYNTAX       Integer32 -- Should be 0..MaxAge, except when
                              -- doNotAge bit is set
       UNITS        "seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "This field is the age of the link state advertisement
          in seconds."
       REFERENCE
          "OSPF Version 2, Section 12.1.1 LS age"
       ::= { rosMgmtOspfLsdbEntry 6 }

  rosMgmtOspfLsdbChecksum OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "This field is the checksum of the complete contents of
          the advertisement, excepting the age field.  The age field
          is excepted so that an advertisement's age can be
          incremented without updating the checksum.  The checksum
          used is the same that is used for ISO connectionless

          datagrams; it is commonly referred to as the
          Fletcher checksum."
        REFERENCE
           "OSPF Version 2, Section 12.1.7 LS checksum"
        ::= { rosMgmtOspfLsdbEntry 7 }

  rosMgmtOspfLsdbAdvertisement OBJECT-TYPE
       SYNTAX       OCTET STRING 
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The entire link state advertisement, including
          its header.

          Note that for variable length LSAs, SNMP agents
          may not be able to return the largest string size."
       REFERENCE
          "OSPF Version 2, Section 12 Link State Advertisements"
       ::= { rosMgmtOspfLsdbEntry 8 } 
         
--rosMgmtOspfAsLsdbTable    
--
--OSPF Link State Database, External
  rosMgmtOspfAsLsdbTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfAsLsdbEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The OSPF Process's AS-scope LSA link state database.
           The database contains the AS-scope Link State
           Advertisements from throughout the areas that
           the device is attached to.

           This table is identical to the OSPF LSDB Table
           in format, but contains only AS-scope Link State
           Advertisements.  The purpose is to allow AS-scope
           LSAs to be displayed once for the router rather
           than once in each non-stub area."
       REFERENCE
          "OSPF Version 2, Section 12 Link State
          Advertisements"
       ::= { rosMgmtOspfObjects 14 }

  rosMgmtOspfAsLsdbEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfAsLsdbEntry

       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "A single link state advertisement."
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfAsLsdbType, 
               rosMgmtOspfAsLsdbLsId, 
               rosMgmtOspfAsLsdbRouterId }
       ::= { rosMgmtOspfAsLsdbTable 1 }

  RosMgmtOspfAsLsdbEntry ::=
       SEQUENCE {
          rosMgmtOspfAsLsdbType
             INTEGER,
          rosMgmtOspfAsLsdbLsId
             IpAddress,
          rosMgmtOspfAsLsdbRouterId
             RouterID,
          rosMgmtOspfAsLsdbSequence
             Integer32,
          rosMgmtOspfAsLsdbAge
             Integer32,
          rosMgmtOspfAsLsdbChecksum
             Integer32,
          rosMgmtOspfAsLsdbAdvertisement
             OCTET STRING
          }

  rosMgmtOspfAsLsdbType OBJECT-TYPE
       SYNTAX      INTEGER { asExternalLink (5) }
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "The type of the link state advertisement.
          Each link state type has a separate
          advertisement format."
       REFERENCE
          "OSPF Version 2, Appendix A.4.1 The Link State
          Advertisement header"
       ::= { rosMgmtOspfAsLsdbEntry 1 }

  rosMgmtOspfAsLsdbLsId OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "The Link State ID is an LS Type Specific field
          containing either a Router ID or an IP address;

          it identifies the piece of the routing domain
          that is being described by the advertisement."
       REFERENCE
          "OSPF Version 2, Section 12.1.4 Link State ID"
       ::= { rosMgmtOspfAsLsdbEntry 2 }

  rosMgmtOspfAsLsdbRouterId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "The 32-bit number that uniquely identifies the
          originating router in the Autonomous System."
       REFERENCE
          "OSPF Version 2, Appendix C.1 Global parameters"
       ::= { rosMgmtOspfAsLsdbEntry 3 }

  rosMgmtOspfAsLsdbSequence OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The sequence number field is a signed 32-bit
          integer.  It starts with the value '80000001'h,
          or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
          Thus, a typical sequence number will be very negative.
          It is used to detect old and duplicate link state
          advertisements.  The space of sequence numbers is linearly
          ordered.  The larger the sequence number, the more recent
          the advertisement."
       REFERENCE
          "OSPF Version  2,  Section  12.1.6  LS  sequence
          number"
       ::= { rosMgmtOspfAsLsdbEntry 4 }

  rosMgmtOspfAsLsdbAge OBJECT-TYPE
       SYNTAX       Integer32 -- Should be 0..MaxAge, except when
                              -- doNotAge bit is set
       UNITS        "seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "This field is the age of the link state
          advertisement in seconds."
       REFERENCE
          "OSPF Version 2, Section 12.1.1 LS age"
       ::= { rosMgmtOspfAsLsdbEntry 5 }

  rosMgmtOspfAsLsdbChecksum OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "This field is the checksum of the complete
          contents of the advertisement, excepting the
          age field.  The age field is excepted so that
          an advertisement's age can be incremented
          without updating the checksum.  The checksum
          used is the same that is used for ISO
          connectionless datagrams; it is commonly referred
          to as the Fletcher checksum."
       REFERENCE
          "OSPF Version 2, Section 12.1.7 LS checksum"
       ::= { rosMgmtOspfAsLsdbEntry 6 }

  rosMgmtOspfAsLsdbAdvertisement OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The entire link state advertisement, including
          its header."
       REFERENCE
          "OSPF Version 2, Section 12 Link State
          Advertisements.

          Note that for variable length LSAs, SNMP agents
          may not be able to return the largest string size."
       ::= { rosMgmtOspfAsLsdbEntry 7 }   
       
--rosMgmtOspfAreaLsaCountTable    
--
--OSPF Area LSA Counter Table
  rosMgmtOspfAreaLsaCountTable OBJECT-TYPE
          SYNTAX       SEQUENCE OF RosMgmtOspfAreaLsaCountEntry
          MAX-ACCESS   not-accessible
          STATUS       current
          DESCRIPTION
             "This table maintains per-area, per-LSA-type counters"
          ::= { rosMgmtOspfObjects 15 }

      rosMgmtOspfAreaLsaCountEntry OBJECT-TYPE
          SYNTAX       RosMgmtOspfAreaLsaCountEntry
          MAX-ACCESS   not-accessible
          STATUS       current
          DESCRIPTION
             "An entry with a number of link advertisements
              of a given type for a given area."
          INDEX { rosMgmtOspfProcessId,
                  rosMgmtOspfAreaLsaCountAreaId, 
                  rosMgmtOspfAreaLsaCountLsaType }
          ::= { rosMgmtOspfAreaLsaCountTable 1 }

      RosMgmtOspfAreaLsaCountEntry ::=
           SEQUENCE {
              rosMgmtOspfAreaLsaCountAreaId
                 AreaID,
              rosMgmtOspfAreaLsaCountLsaType
                 INTEGER,
              rosMgmtOspfAreaLsaCountNumber
                 Gauge32
           }

      rosMgmtOspfAreaLsaCountAreaId OBJECT-TYPE
          SYNTAX       AreaID
          MAX-ACCESS    not-accessible
          STATUS       current
          DESCRIPTION
             "This entry Area ID."
         ::= { rosMgmtOspfAreaLsaCountEntry 1 }
		 	 		
      rosMgmtOspfAreaLsaCountLsaType OBJECT-TYPE
          SYNTAX       INTEGER {
                          routerLink (1),
                          networkLink (2),
                          summaryLink (3),
                          asSummaryLink (4),                         
                          nssaExternalLink (7),
			  linkOpaqueLink (9),
                          areaOpaqueLink (10)
                       }
          MAX-ACCESS    not-accessible
          STATUS       current
          DESCRIPTION
             "This entry LSA type."
         ::= { rosMgmtOspfAreaLsaCountEntry 2 }

      rosMgmtOspfAreaLsaCountNumber OBJECT-TYPE
          SYNTAX       Gauge32
          MAX-ACCESS   read-only
          STATUS       current
          DESCRIPTION
             "Number of LSAs of a given type for a given area."
         ::= { rosMgmtOspfAreaLsaCountEntry 3 }
    
-- rosMgmtOspfRedistributeTable  
--
  rosMgmtOspfRedistributeTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfRedistributeEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Import external route to ospf protocol."
       ::= { rosMgmtOspfObjects 16 }

  rosMgmtOspfRedistributeEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfRedistributeEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfRedistributeTable"
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfRedistributeProtocol, 
               rosMgmtOspfRedistributeProcessId }
       ::= { rosMgmtOspfRedistributeTable 1 }

  RosMgmtOspfRedistributeEntry ::=
       SEQUENCE {
          rosMgmtOspfRedistributeProtocol
             INTEGER,
          rosMgmtOspfRedistributeProcessId
             ProcessID,
          rosMgmtOspfRedistributeCost
             BigMetric,
          rosMgmtOspfRedistributeType
             INTEGER,
          rosMgmtOspfRedistributeStatus
             RowStatus,
          rosMgmtOspfRedistributeRouteMapName
             OCTET STRING,
          rosMgmtOspfRedistributeTag
             Unsigned32
          }

  rosMgmtOspfRedistributeProtocol OBJECT-TYPE
       SYNTAX  INTEGER {                  -- RFC1213  route proto define
                          other(1),       -- none of the following

                                          -- non-protocol information,
                                          -- e.g., manually configured
                          local(2),       -- entries

                                          -- set via a network
                          netmgmt(3),     -- management protocol

                                          -- obtained via ICMP,
                          icmp(4),        -- e.g., Redirect

                                          -- the remaining values are
                                          -- all gateway routing
                                          -- protocols
                          egp(5),
                          ggp(6),
                          hello(7),
                          rip(8),
                          isis(9),
                          esis(10),
                          ciscoIgrp(11),
                          bbnSpfIgp(12),
                          ospf(13),
                          bgp(14)
                      }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "Route protocol to be redistributed."
       ::= { rosMgmtOspfRedistributeEntry 1 }

  rosMgmtOspfRedistributeProcessId OBJECT-TYPE
       SYNTAX       ProcessID
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "Process id of redistributed route protocol, only support ospf."
       ::= { rosMgmtOspfRedistributeEntry 2 }

  rosMgmtOspfRedistributeCost OBJECT-TYPE
       SYNTAX       BigMetric
       MAX-ACCESS   read-create 
       STATUS       current
       DESCRIPTION
          "It indicates the cost of redistributed route, 16777215 represents
         the cost is not set, the metric of route while decided by
         ospf itself according to the route type."  
       DEFVAL { 1 }
       ::= { rosMgmtOspfRedistributeEntry 3 }

  rosMgmtOspfRedistributeType OBJECT-TYPE
       SYNTAX       INTEGER { e1(1),e2(2) }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The type of external route."   
       DEFVAL { e2 }
       ::= { rosMgmtOspfRedistributeEntry 4 }

  rosMgmtOspfRedistributeStatus OBJECT-TYPE
       SYNTAX       RowStatus 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfRedistributeEntry 5 }
   rosMgmtOspfRedistributeRouteMapName OBJECT-TYPE
       SYNTAX       OCTET STRING 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Specify a route-map."
       ::= { rosMgmtOspfRedistributeEntry 6 }

   rosMgmtOspfRedistributeTag OBJECT-TYPE
       SYNTAX       Unsigned32
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Set tag of route."
       ::= { rosMgmtOspfRedistributeEntry 7 }

--rosMgmtOspfDefaultInfoTable    
--
  rosMgmtOspfDefaultInfoTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfDefaultInfoEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table generate or delete the default route."
       ::= { rosMgmtOspfObjects 17 }

  rosMgmtOspfDefaultInfoEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfDefaultInfoEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfDefaultInfoTable"
       INDEX { rosMgmtOspfProcessId }
       ::= { rosMgmtOspfDefaultInfoTable 1 }

  RosMgmtOspfDefaultInfoEntry ::=
       SEQUENCE {
          rosMgmtOspfDefaultInfoAlways
             TruthValue,
          rosMgmtOspfDefaultInfoCost
             BigMetric,
          rosMgmtOspfDefaultInfoType
             INTEGER,
          rosMgmtOspfDefaultInfoStatus
             RowStatus
                }

  rosMgmtOspfDefaultInfoAlways OBJECT-TYPE
       SYNTAX       TruthValue
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Whether always inform default route."    
       DEFVAL { false }
       ::= { rosMgmtOspfDefaultInfoEntry 1 }

  rosMgmtOspfDefaultInfoCost OBJECT-TYPE
       SYNTAX       BigMetric
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "It indicates the default cost of route, 16777215 represents
         the default cost is not set, the metric of route while decided by
         ospf itself according to the route type."     
       DEFVAL { 1 }
       ::= { rosMgmtOspfDefaultInfoEntry 2 }

  rosMgmtOspfDefaultInfoType OBJECT-TYPE
       SYNTAX       INTEGER  { e1(1),e2(2) }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "It indicates the type of default route."    
       DEFVAL { e2 }
       ::= { rosMgmtOspfDefaultInfoEntry 3 }

  rosMgmtOspfDefaultInfoStatus OBJECT-TYPE
       SYNTAX       RowStatus 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfDefaultInfoEntry 4 }   

-- rosMgmtOspfPacketIoStatisTable  
--
  rosMgmtOspfPacketIoStatisTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfPacketIoStatisEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table is used to storage all kinds of 
          input and output packet statistical information of 
          OSPF process."
       ::= { rosMgmtOspfObjects 18 }

  rosMgmtOspfPacketIoStatisEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfPacketIoStatisEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfPacketIoStatisTable"
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfPacketIoStatisIoType,
               rosMgmtOspfPacketIoStatisPktType }
       ::= { rosMgmtOspfPacketIoStatisTable 1 }                

  RosMgmtOspfPacketIoStatisEntry ::=
       SEQUENCE {
          rosMgmtOspfPacketIoStatisIoType
             INTEGER,
          rosMgmtOspfPacketIoStatisPktType
             INTEGER,
          rosMgmtOspfPacketIoStatisNumber
             Integer32
                }

  rosMgmtOspfPacketIoStatisIoType OBJECT-TYPE
       SYNTAX       INTEGER {
                      input (1),
                      output (2)
                      }
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "It has been used to describe the IO direction of 
          packet."    
       ::= { rosMgmtOspfPacketIoStatisEntry 1 }       

  rosMgmtOspfPacketIoStatisPktType OBJECT-TYPE
       SYNTAX       INTEGER {
                      hello (1),
                      dbDescript (2),
                      lsReq (3),
                      lsUpdate (4),
                      lsAck (5)
                      }
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "It has been used to describe the type of 
          OSPF packet."    
       ::= { rosMgmtOspfPacketIoStatisEntry 2 } 
       
  rosMgmtOspfPacketIoStatisNumber OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The number indicates the number of specified type of 
          packets on input or output direction."    
       ::= { rosMgmtOspfPacketIoStatisEntry 3 }        

-- rosMgmtOspfRouteTable  
--
  rosMgmtOspfRouteTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfRouteEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table is used to storage OSPF calculation of routing table."
       ::= { rosMgmtOspfObjects 19 }

  rosMgmtOspfRouteEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfRouteEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfRouteTable"
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfRouteDest,
               rosMgmtOspfRouteMask,
               rosMgmtOspfRouteType }
       ::= { rosMgmtOspfRouteTable 1 }                

  RosMgmtOspfRouteEntry ::=
       SEQUENCE {
          rosMgmtOspfRouteDest
             IpAddress,
          rosMgmtOspfRouteMask
             IpAddress,
          rosMgmtOspfRouteType
             Integer32,
          rosMgmtOspfRouteLsType   
             INTEGER,
          rosMgmtOspfRouteMetric   
             Integer32,
          rosMgmtOspfRouteNextHop
             IpAddress, 
          rosMgmtOspfRouteAdvRtr
             IpAddress, 
          rosMgmtOspfRouteArea
             Integer32
                }

  rosMgmtOspfRouteDest OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "It has been used to describe the destination address of 
          an ospf route."    
       ::= { rosMgmtOspfRouteEntry 1 }       

  rosMgmtOspfRouteMask OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "It has been used to describe the mask of 
          an ospf route."    
       ::= { rosMgmtOspfRouteEntry 2 }
  
  rosMgmtOspfRouteType OBJECT-TYPE
       SYNTAX       Integer32 (1..'37'h)
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "It indicates the type of an ospf route.            
          The hige 8 bits represents the ospf route type. 
          Value 1, represents the route is a ROUTER route, 
          whith is to a destined router.   
          Value 2, is for a NETWORK route, most caculated 
          ospf route is NETWORK route.     
          Value 3, represents the route is to be DISCARDed resently.
               
          The low 8 bits represents the ospf route path type. 
          Value 1, represents the route path is a intra area path, 
          Value 2, represents the route path is a inter area path,     
          Value 3, represents the route path is a type1 external path,   
          Value 4, represents the route path is a type2 external path"    
       ::= { rosMgmtOspfRouteEntry 3 } 
  
  rosMgmtOspfRouteLsType OBJECT-TYPE
       SYNTAX       INTEGER {
                      stub (0),
                      routerLink (1),
                      networkLink (2),
                      summaryLink (3),
                      asSummaryLink (4),
                      asExternalLink (5), 
                      multicastLink (6),
                      nssaExternalLink (7),
                      areaOpaqueLink (10)
                      }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the LSA type of 
          a router."  
       ::= { rosMgmtOspfRouteEntry 4 } 

  rosMgmtOspfRouteMetric OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the metric of 
          an ospf route. "    
       ::= { rosMgmtOspfRouteEntry 5 } 
  
  rosMgmtOspfRouteNextHop OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the nexthop address of 
          an ospf route."    
       ::= { rosMgmtOspfRouteEntry 6 } 
  
  rosMgmtOspfRouteAdvRtr OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the advertising router of 
          an ospf route."    
       ::= { rosMgmtOspfRouteEntry 7 } 
  
  rosMgmtOspfRouteArea OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the ccmputing area of 
          an ospf route."    
       ::= { rosMgmtOspfRouteEntry 8 } 
                                                         
-- rosMgmtOspfBdrRouteTable 
--
  rosMgmtOspfBdrRouteTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfBdrRouteEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table is used to storage the imformation of boder router."
       ::= { rosMgmtOspfObjects 20 }

  rosMgmtOspfBdrRouteEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfBdrRouteEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfBdrRouteTable"
       INDEX { rosMgmtOspfProcessId,
               rosMgmtOspfBdrRouteRtrType,
               rosMgmtOspfBdrRouteArea,
               rosMgmtOspfBdrRouteDest,
               rosMgmtOspfBdrRouteNextHop }
       ::= { rosMgmtOspfBdrRouteTable 1 }                

  RosMgmtOspfBdrRouteEntry ::=
       SEQUENCE {
          rosMgmtOspfBdrRouteRtrType
             Integer32,
          rosMgmtOspfBdrRouteArea
             IpAddress,
          rosMgmtOspfBdrRouteDest
             IpAddress,
          rosMgmtOspfBdrRouteNextHop   
             IpAddress, 
          rosMgmtOspfBdrRouteLsType   
             INTEGER,
          rosMgmtOspfBdrRouteMetric
             Integer32
             }

  rosMgmtOspfBdrRouteRtrType OBJECT-TYPE
       SYNTAX       Integer32  (1..'77'h)
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "It indicates the type of an ospf router.            
          The hige 8 bits is a bit mask corresponding to 
          the ospf router type. 
          Bit 1, if set, indicates that the router is an ABR.
          Bit 2, if set, indicates that the router is an ASBR.. 
          Bit 3, if set, indicates that the router has a VLINK in this area.     
          Bit 4, if set, indicates that the routers always translates Type-7.   
          Bit 5, if set, indicates that it is a shortcut-ABR specific flag.
               
          The low 8 bits represents the route path type to this router. 
          Value 1, represents the route path is a intra area path, 
          Value 2, represents the route path is a inter area path,     
          Value 3, represents the route path is a type1 external path,   
          Value 4, represents the route path is a type2 external path" 
       ::= { rosMgmtOspfBdrRouteEntry 1 }       
     
  rosMgmtOspfBdrRouteArea OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "It has been used to describe the area of 
          a boder router."    
       ::= { rosMgmtOspfBdrRouteEntry 2 }       
  
  rosMgmtOspfBdrRouteDest OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "It has been used to describe the boder router by 
          it's router id."    
       ::= { rosMgmtOspfBdrRouteEntry 3 }       
  
  rosMgmtOspfBdrRouteNextHop OBJECT-TYPE
       SYNTAX       IpAddress
       MAX-ACCESS    not-accessible
       STATUS       current
       DESCRIPTION
          "IIt has been used to describe the nexthop router to 
          reach a boder router."    
       ::= { rosMgmtOspfBdrRouteEntry 4 }       
  
  rosMgmtOspfBdrRouteLsType OBJECT-TYPE
       SYNTAX       INTEGER {
                      routerLink (1),
                      networkLink (2),
                      summaryLink (3),
                      asSummaryLink (4),
                      asExternalLink (5), 
                      multicastLink (6),
                      nssaExternalLink (7),
                      areaOpaqueLink (10)
                      }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the LSA type of 
          a boder router."    
       ::= { rosMgmtOspfBdrRouteEntry 5 }       
  
  rosMgmtOspfBdrRouteMetric OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "It has been used to describe the metric to 
          a boder router."    
       ::= { rosMgmtOspfBdrRouteEntry 6 }       
       
  rosMgmtOspfDistributeListGroup     OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 21}  
  
-- rosMgmtOspfDistributeListInTable 
--
  rosMgmtOspfDistributeListInTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfDistributeListInEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table is used to config and check distribute-in policy."
       ::= { rosMgmtOspfDistributeListGroup 1 }

  rosMgmtOspfDistributeListInEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfDistributeListInEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfDistributeListInTable"
       INDEX { rosMgmtOspfProcessId }
       ::= { rosMgmtOspfDistributeListInTable 1 }                

  RosMgmtOspfDistributeListInEntry ::=
       SEQUENCE {
          rosMgmtOspfDistrInIpPrefixListName
             OCTET STRING,
          rosMgmtOspfDistrInAclNum
             Integer32,
          rosMgmtOspfDistrInRowStatus
             RowStatus
             }

  rosMgmtOspfDistrInIpPrefixListName OBJECT-TYPE
       SYNTAX       OCTET STRING
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filter incoming routing updates,the value of this 
           object indicates the name of an ip-prefix-list."    
       ::= { rosMgmtOspfDistributeListInEntry 1 }       
         
   rosMgmtOspfDistrInAclNum OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filter incoming routing updates by the IP ACL number of OSPF distribute-in policy,
          -1 is a value to inditace no setting of acl."    
       ::= { rosMgmtOspfDistributeListInEntry 2 }  

   rosMgmtOspfDistrInRowStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
           facilitating actions such as row creation,construction, 
           and destruction.The value of this object has no effect
           on whether other objects in this conceptual row can be 
           modified."    
       ::= { rosMgmtOspfDistributeListInEntry 3 }  
       
-- rosMgmtOspfDistributeListOutTable  
--
  rosMgmtOspfDistributeListOutTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfDistributeListOutEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table is used to config and check distribute-out policy."
       ::= { rosMgmtOspfDistributeListGroup 2 }

  rosMgmtOspfDistributeListOutEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfDistributeListOutEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfDistributeListOutTable"
       INDEX { rosMgmtOspfProcessId }
       ::= { rosMgmtOspfDistributeListOutTable 1 }                

  RosMgmtOspfDistributeListOutEntry ::=
       SEQUENCE {
          rosMgmtOspfDistrOutIpPrefixListName
             OCTET STRING,
          rosMgmtOspfDistrOutAclNum
             Integer32,
          rosMgmtOspfDistrOutRowStatus
             RowStatus
             }

  rosMgmtOspfDistrOutIpPrefixListName OBJECT-TYPE
       SYNTAX       OCTET STRING 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filter outgoing routing updates,the value of this object
           indicates the name of an ip-prefix-list."    
       ::= { rosMgmtOspfDistributeListOutEntry 1 }       
         
   rosMgmtOspfDistrOutAclNum OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filter incoming outgoing updates by the IP ACL number of OSPF distribute-out policy,
          -1 is a value to inditace no setting of acl."    
       ::= { rosMgmtOspfDistributeListOutEntry 2 }  

   rosMgmtOspfDistrOutRowStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
           facilitating actions such as row creation,construction, 
           and destruction. The value of this object has no effect 
           on whether other objects in this conceptual row can be 
           modified."    
       ::= { rosMgmtOspfDistributeListOutEntry 3 }     

-- rosMgmtOspfDistributeListOutProtocolTable   
--
  rosMgmtOspfDistributeListOutProtocolTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfDistributeListOutProtocolEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table is used to config and check distribute-out policy based on protocol."
       ::= { rosMgmtOspfDistributeListGroup 3 }

  rosMgmtOspfDistributeListOutProtocolEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfDistributeListOutProtocolEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the rosMgmtOspfDistributeListOutProtocolTable"
       INDEX { 
               rosMgmtOspfProcessId, 
               rosMgmtOspfDistrOutProtocol,
               rosMgmtOspfDistrOutProcessId
                }
       ::= { rosMgmtOspfDistributeListOutProtocolTable 1 }                

  RosMgmtOspfDistributeListOutProtocolEntry ::=
       SEQUENCE {
          rosMgmtOspfDistrOutProtocol
             INTEGER,
          rosMgmtOspfDistrOutProcessId
             ProcessID,
          rosMgmtOspfDistrOutProIpPrefixListName
             OCTET STRING,
          rosMgmtOspfDistrOutProAclNum
             Integer32,
          rosMgmtOspfDistrOutProRowStatus
             RowStatus    
             }

  rosMgmtOspfDistrOutProtocol OBJECT-TYPE
       SYNTAX  INTEGER {                  -- RFC1213  route proto define
                          other(1),       -- none of the following

                                          -- non-protocol information,
                                          -- e.g., manually configured
                          local(2),       -- entries

                                          -- set via a network
                          netmgmt(3),     -- management protocol

                                          -- obtained via ICMP,
                          icmp(4),        -- e.g., Redirect

                                          -- the remaining values are
                                          -- all gateway routing
                                          -- protocols
                          egp(5),
                          ggp(6),
                          hello(7),
                          rip(8),
                          isis(9),
                          esis(10),
                          ciscoIgrp(11),
                          bbnSpfIgp(12),
                          ospf(13),
                          bgp(14)
                      }
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Redistributed route protocol."    
       ::= { rosMgmtOspfDistributeListOutProtocolEntry 1 }       
         
   rosMgmtOspfDistrOutProcessId OBJECT-TYPE
       SYNTAX       ProcessID
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Process id of redistributed route protocol, only support ospf."    
       ::= { rosMgmtOspfDistributeListOutProtocolEntry 2 }  

   rosMgmtOspfDistrOutProIpPrefixListName OBJECT-TYPE
       SYNTAX       OCTET STRING 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filtering outgoing updates based on imported protocol, the value 
           of this object indicates the name of an ip-prefix-list."    
       ::= { rosMgmtOspfDistributeListOutProtocolEntry 3 } 
       
    rosMgmtOspfDistrOutProAclNum OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Filtering outgoing updates based on imported protocol, the value of this object 
          indicates the IP ACL number, -1 is a value to inditace no setting of acl."    
       ::= { rosMgmtOspfDistributeListOutProtocolEntry 4 }  
       
     rosMgmtOspfDistrOutProRowStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
           facilitating actions such as row creation,construction, 
           and destruction.The value of this object has no effect 
           on whether other objects in this conceptual row can be 
           modified."    
       ::= { rosMgmtOspfDistributeListOutProtocolEntry 5 }   
       
       
--rosMgmtOspfDNBitCheckDisableSummaryTable    
--
  rosMgmtOspfDNBitCheckDisableSummaryTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF RosMgmtOspfDNBitCheckDisableSummaryEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "The table check or set the operation  of ND bit."
       ::= { rosMgmtOspfObjects 22 }

  rosMgmtOspfDNBitCheckDisableSummaryEntry OBJECT-TYPE
       SYNTAX       RosMgmtOspfDNBitCheckDisableSummaryEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Define an entry in the RosMgmtOspfDNBitCheckDisableSummaryEntry"
       INDEX { 
                rosMgmtOspfProcessId,
                rosMgmtOspfDNBitCheckDisableSummaryRtrId
             }
       ::= { rosMgmtOspfDNBitCheckDisableSummaryTable 1 }

  RosMgmtOspfDNBitCheckDisableSummaryEntry ::=
       SEQUENCE {
          rosMgmtOspfDNBitCheckDisableSummaryRtrId
             RouterID,
          rosMgmtOspfDNBitCheckDisableSummaryStatus
             RowStatus
                }

  rosMgmtOspfDNBitCheckDisableSummaryRtrId OBJECT-TYPE
       SYNTAX       RouterID
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "It indicates the router-id of summary-lsa,which can be operated the DN bit separately.This node can only
          be used for check operation"    
       ::= { rosMgmtOspfDNBitCheckDisableSummaryEntry 1 }

  rosMgmtOspfDNBitCheckDisableSummaryStatus OBJECT-TYPE
       SYNTAX       RowStatus 
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object permits management of the table by
          facilitating actions such as row creation,
          construction, and destruction.

          The value of this object has no effect on
          whether other objects in this conceptual row can be
          modified."
       ::= { rosMgmtOspfDNBitCheckDisableSummaryEntry 2 }   

                                                 
END